Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
Add UNPLUG traces to all appropriate places
block: fix requeue handling in blk_queue_invalidate_tags()
mmc: Fix sg helper copy-and-paste error
pktcdvd: fix BUG caused by sysfs module reference semantics change
ioprio: allow sys_ioprio_set() value of 0 to reset ioprio setting
cfq_idle_class_timer: add paranoid checks for jiffies overflow
cfq: fix IOPRIO_CLASS_IDLE delays
cfq: fix IOPRIO_CLASS_IDLE accounting
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index f5a5e6d..563e442 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -4,8 +4,6 @@
- information on the 3Com EtherLink Plus (3c505) driver.
6pack.txt
- info on the 6pack protocol, an alternative to KISS for AX.25
-Configurable
- - info on some of the configurable network parameters
DLINK.txt
- info on the D-Link DE-600/DE-620 parallel port pocket adapters
PLIP.txt
@@ -26,8 +24,6 @@
- info on the driver for Baycom style amateur radio modems
bridge.txt
- where to get user space programs for ethernet bridging with Linux.
-comx.txt
- - info on drivers for COMX line of synchronous serial adapters.
cops.txt
- info on the COPS LocalTalk Linux driver
cs89x0.txt
@@ -78,20 +74,14 @@
- the Apple or Farallon LocalTalk PC card driver
multicast.txt
- Behaviour of cards under Multicast
-ncsa-telnet
- - notes on how NCSA telnet (DOS) breaks with MTU discovery enabled.
netdevices.txt
- info on network device driver functions exported to the kernel.
olympic.txt
- IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info.
policy-routing.txt
- IP policy-based routing
-pt.txt
- - the Gracilis Packetwin AX.25 device driver
ray_cs.txt
- Raylink Wireless LAN card driver info.
-routing.txt
- - the new routing mechanism
shaper.txt
- info on the module that can shape/limit transmitted traffic.
sk98lin.txt
diff --git a/Documentation/networking/Configurable b/Documentation/networking/Configurable
deleted file mode 100644
index 69c0dd4..0000000
--- a/Documentation/networking/Configurable
+++ /dev/null
@@ -1,34 +0,0 @@
-
-There are a few network parameters that can be tuned to better match
-the kernel to your system hardware and intended usage. The defaults
-are usually a good choice for 99% of the people 99% of the time, but
-you should be aware they do exist and can be changed.
-
-The current list of parameters can be found in the files:
-
- linux/net/TUNABLE
- Documentation/networking/ip-sysctl.txt
-
-Some of these are accessible via the sysctl interface, and many more are
-scheduled to be added in this way. For example, some parameters related
-to Address Resolution Protocol (ARP) are very easily viewed and altered.
-
- # cat /proc/sys/net/ipv4/arp_timeout
- 6000
- # echo 7000 > /proc/sys/net/ipv4/arp_timeout
- # cat /proc/sys/net/ipv4/arp_timeout
- 7000
-
-Others are already accessible via the related user space programs.
-For example, MAX_WINDOW has a default of 32 k which is a good choice for
-modern hardware, but if you have a slow (8 bit) Ethernet card and/or a slow
-machine, then this will be far too big for the card to keep up with fast
-machines transmitting on the same net, resulting in overruns and receive errors.
-A value of about 4 k would be more appropriate, which can be set via:
-
- # route add -net 192.168.3.0 window 4096
-
-The remainder of these can only be presently changed by altering a #define
-in the related header file. This means an edit and recompile cycle.
-
- Paul Gortmaker 06/96
diff --git a/Documentation/networking/comx.txt b/Documentation/networking/comx.txt
deleted file mode 100644
index d1526eb..0000000
--- a/Documentation/networking/comx.txt
+++ /dev/null
@@ -1,248 +0,0 @@
-
- COMX drivers for the 2.2 kernel
-
-Originally written by: Tivadar Szemethy, <tiv@itc.hu>
-Currently maintained by: Gergely Madarasz <gorgo@itc.hu>
-
-Last change: 21/06/1999.
-
-INTRODUCTION
-
-This document describes the software drivers and their use for the
-COMX line of synchronous serial adapters for Linux version 2.2.0 and
-above.
-The cards are produced and sold by ITC-Pro Ltd. Budapest, Hungary
-For further info contact <info@itc.hu>
-or http://www.itc.hu (mostly in Hungarian).
-The firmware files and software are available from ftp://ftp.itc.hu
-
-Currently, the drivers support the following cards and protocols:
-
-COMX (2x64 kbps intelligent board)
-CMX (1x256 + 1x128 kbps intelligent board)
-HiCOMX (2x2Mbps intelligent board)
-LoCOMX (1x512 kbps passive board)
-MixCOM (1x512 or 2x512kbps passive board with a hardware watchdog an
- optional BRI interface and optional flashROM (1-32M))
-SliceCOM (1x2Mbps channelized E1 board)
-PciCOM (X21)
-
-At the moment of writing this document, the (Cisco)-HDLC, LAPB, SyncPPP and
-Frame Relay (DTE, rfc1294 IP encapsulation with partially implemented Q933a
-LMI) protocols are available as link-level protocol.
-X.25 support is being worked on.
-
-USAGE
-
-Load the comx.o module and the hardware-specific and protocol-specific
-modules you'll need into the running kernel using the insmod utility.
-This creates the /proc/comx directory.
-See the example scripts in the 'etc' directory.
-
-/proc INTERFACE INTRO
-
-The COMX driver set has a new type of user interface based on the /proc
-filesystem which eliminates the need for external user-land software doing
-IOCTL calls.
-Each network interface or device (i.e. those ones you configure with 'ifconfig'
-and 'route' etc.) has a corresponding directory under /proc/comx. You can
-dynamically create a new interface by saying 'mkdir /proc/comx/comx0' (or you
-can name it whatever you want up to 8 characters long, comx[n] is just a
-convention).
-Generally the files contained in these directories are text files, which can
-be viewed by 'cat filename' and you can write a string to such a file by
-saying 'echo _string_ >filename'. This is very similar to the sysctl interface.
-Don't use a text editor to edit these files, always use 'echo' (or 'cat'
-where appropriate).
-When you've created the comx[n] directory, two files are created automagically
-in it: 'boardtype' and 'protocol'. You have to fill in these files correctly
-for your board and protocol you intend to use (see the board and protocol
-descriptions in this file below or the example scripts in the 'etc' directory).
-After filling in these files, other files will appear in the directory for
-setting the various hardware- and protocol-related informations (for example
-irq and io addresses, keepalive values etc.) These files are set to default
-values upon creation, so you don't necessarily have to change all of them.
-
-When you're ready with filling in the files in the comx[n] directory, you can
-configure the corresponding network interface with the standard network
-configuration utilities. If you're unable to bring the interfaces up, look up
-the various kernel log files on your system, and consult the messages for
-a probable reason.
-
-EXAMPLE
-
-To create the interface 'comx0' which is the first channel of a COMX card:
-
-insmod comx
-# insmod comx-hw-comx ; insmod comx-proto-ppp (these are usually
-autoloaded if you use the kernel module loader)
-
-mkdir /proc/comx/comx0
-echo comx >/proc/comx/comx0/boardtype
-echo 0x360 >/proc/comx/comx0/io <- jumper-selectable I/O port
-echo 0x0a >/proc/comx/comx0/irq <- jumper-selectable IRQ line
-echo 0xd000 >/proc/comx/comx0/memaddr <- software-configurable memory
- address. COMX uses 64 KB, and this
- can be: 0xa000, 0xb000, 0xc000,
- 0xd000, 0xe000. Avoid conflicts
- with other hardware.
-cat </etc/siol1.rom >/proc/comx/comx0/firmware <- the firmware for the card
-echo HDLC >/proc/comx/comx0/protocol <- the data-link protocol
-echo 10 >/proc/comx/comx0/keepalive <- the keepalive for the protocol
-ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255 <-
- finally configure it with ifconfig
-Check its status:
-cat /proc/comx/comx0/status
-
-If you want to use the second channel of this board:
-
-mkdir /proc/comx/comx1
-echo comx >/proc/comx/comx1/boardtype
-echo 0x360 >/proc/comx/comx1/io
-echo 10 >/proc/comx/comx1/irq
-echo 0xd000 >/proc/comx/comx1/memaddr
-echo 1 >/proc/comx/comx1/channel <- channels are numbered
- as 0 (default) and 1
-
-Now, check if the driver recognized that you're going to use the other
-channel of the same adapter:
-
-cat /proc/comx/comx0/twin
-comx1
-cat /proc/comx/comx1/twin
-comx0
-
-You don't have to load the firmware twice, if you use both channels of
-an adapter, just write it into the channel 0's /proc firmware file.
-
-Default values: io 0x360 for COMX, 0x320 (HICOMX), irq 10, memaddr 0xd0000
-
-THE LOCOMX HARDWARE DRIVER
-
-The LoCOMX driver doesn't require firmware, and it doesn't use memory either,
-but it uses DMA channels 1 and 3. You can set the clock rate (if enabled by
-jumpers on the board) by writing the kbps value into the file named 'clock'.
-Set it to 'external' (it is the default) if you have external clock source.
-
-(Note: currently the LoCOMX driver does not support the internal clock)
-
-THE COMX, CMX AND HICOMX DRIVERS
-
-On the HICOMX, COMX and CMX, you have to load the firmware (it is different for
-the three cards!). All these adapters can share the same memory
-address (we usually use 0xd0000). On the CMX you can set the internal
-clock rate (if enabled by jumpers on the small adapter boards) by writing
-the kbps value into the 'clock' file. You have to do this before initializing
-the card. If you use both HICOMX and CMX/COMX cards, initialize the HICOMX
-first. The I/O address of the HICOMX board is not configurable by any
-method available to the user: it is hardwired to 0x320, and if you have to
-change it, consult ITC-Pro Ltd.
-
-THE MIXCOM DRIVER
-
-The MixCOM board doesn't require firmware, the driver communicates with
-it through I/O ports. You can have three of these cards in one machine.
-
-THE SLICECOM DRIVER
-
-The SliceCOM board doesn't require firmware. You can have 4 of these cards
-in one machine. The driver doesn't (yet) support shared interrupts, so
-you will need a separate IRQ line for every board.
-Read Documentation/networking/slicecom.txt for help on configuring
-this adapter.
-
-THE HDLC/PPP LINE PROTOCOL DRIVER
-
-The HDLC/SyncPPP line protocol driver uses the kernel's built-in syncppp
-driver (syncppp.o). You don't have to manually select syncppp.o when building
-the kernel, the dependencies compile it in automatically.
-
-
-
-
-EXAMPLE
-(setting up hw parameters, see above)
-
-# using HDLC:
-echo hdlc >/proc/comx/comx0/protocol
-echo 10 >/proc/comx/comx0/keepalive <- not necessary, 10 is the default
-ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255
-
-(setting up hw parameters, see above)
-
-# using PPP:
-echo ppp >/proc/comx/comx0/protocol
-ifconfig comx0 up
-ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255
-
-
-THE LAPB LINE PROTOCOL DRIVER
-
-For this, you'll need to configure LAPB support (See 'LAPB Data Link Driver' in
-'Network options' section) into your kernel (thanks to Jonathan Naylor for his
-excellent implementation).
-comx-proto-lapb.o provides the following files in the appropriate directory
-(the default values in parens): t1 (5), t2 (1), n2 (20), mode (DTE, STD) and
-window (7). Agree with the administrator of your peer router on these
-settings (most people use defaults, but you have to know if you are DTE or
-DCE).
-
-EXAMPLE
-
-(setting up hw parameters, see above)
-echo lapb >/proc/comx/comx0/protocol
-echo dce >/proc/comx/comx0/mode <- DCE interface in this example
-ifconfig comx0 1.2.3.4 pointopoint 5.6.7.8 netmask 255.255.255.255
-
-
-THE FRAME RELAY PROTOCOL DRIVER
-
-You DON'T need any other frame relay related modules from the kernel to use
-COMX-Frame Relay. This protocol is a bit more complicated than the others,
-because it allows to use 'subinterfaces' or DLCIs within one physical device.
-First you have to create the 'master' device (the actual physical interface)
-as you would do for other protocols. Specify 'frad' as protocol type.
-Now you can bring this interface up by saying 'ifconfig comx0 up' (or whatever
-you've named the interface). Do not assign any IP address to this interface
-and do not set any routes through it.
-Then, set up your DLCIs the following way: create a comx interface for each
-DLCI you intend to use (with mkdir), and write 'dlci' to the 'boardtype' file,
-and 'ietf-ip' to the 'protocol' file. Currently, the only supported
-encapsulation type is this (also called as RFC1294/1490 IP encapsulation).
-Write the DLCI number to the 'dlci' file, and write the name of the physical
-COMX device to the file called 'master'.
-Now you can assign an IP address to this interface and set routes using it.
-See the example file for further info and example config script.
-Notes: this driver implements a DTE interface with partially implemented
-Q933a LMI.
-You can find an extensively commented example in the 'etc' directory.
-
-FURTHER /proc FILES
-
-boardtype:
-Type of the hardware. Valid values are:
- 'comx', 'hicomx', 'locomx', 'cmx', 'slicecom'.
-
-protocol:
-Data-link protocol on this channel. Can be: HDLC, LAPB, PPP, FRAD
-
-status:
-You can read the channel's actual status from the 'status' file, for example
-'cat /proc/comx/comx3/status'.
-
-lineup_delay:
-Interpreted in seconds (default is 1). Used to avoid line jitter: the system
-will consider the line status 'UP' only if it is up for at least this number
-of seconds.
-
-debug:
-You can set various debug options through this file. Valid options are:
-'comx_events', 'comx_tx', 'comx_rx', 'hw_events', 'hw_tx', 'hw_rx'.
-You can enable a debug options by writing its name prepended by a '+' into
-the debug file, for example 'echo +comx_rx >comx0/debug'.
-Disabling an option happens similarly, use the '-' prefix
-(e.g. 'echo -hw_rx >debug').
-Debug results can be read from the debug file, for example:
-tail -f /proc/comx/comx2/debug
-
-
diff --git a/Documentation/networking/ncsa-telnet b/Documentation/networking/ncsa-telnet
deleted file mode 100644
index d77d28b..0000000
--- a/Documentation/networking/ncsa-telnet
+++ /dev/null
@@ -1,16 +0,0 @@
-NCSA telnet doesn't work with path MTU discovery enabled. This is due to a
-bug in NCSA that also stops it working with other modern networking code
-such as Solaris.
-
-The following information is courtesy of
-Marek <marekm@i17linuxb.ists.pwr.wroc.pl>
-
-There is a fixed version somewhere on ftp.upe.ac.za (sorry, I don't
-remember the exact pathname, and this site is very slow from here).
-It may or may not be faster for you to get it from
-ftp://ftp.ists.pwr.wroc.pl/pub/msdos/telnet/ncsa_upe/tel23074.zip
-(source is in v230704s.zip). I have tested it with 1.3.79 (with
-path mtu discovery enabled - ncsa 2.3.08 didn't work) and it seems
-to work. I don't know if anyone is working on this code - this
-version is over a year old. Too bad - it's faster and often more
-stable than these windoze telnets, and runs on almost anything...
diff --git a/Documentation/networking/pt.txt b/Documentation/networking/pt.txt
deleted file mode 100644
index 72e888c..0000000
--- a/Documentation/networking/pt.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-This is the README for the Gracilis Packetwin device driver, version 0.5
-ALPHA for Linux 1.3.43.
-
-These files will allow you to talk to the PackeTwin (now know as PT) and
-connect through it just like a pair of TNCs. To do this you will also
-require the AX.25 code in the kernel enabled.
-
-There are four files in this archive; this readme, a patch file, a .c file
-and finally a .h file. The two program files need to be put into the
-drivers/net directory in the Linux source tree, for me this is the
-directory /usr/src/linux/drivers/net. The patch file needs to be patched in
-at the top of the Linux source tree (/usr/src/linux in my case).
-
-You will most probably have to edit the pt.c file to suit your own setup,
-this should just involve changing some of the defines at the top of the file.
-Please note that if you run an external modem you must specify a speed of 0.
-
-The program is currently setup to run a 4800 baud external modem on port A
-and a Kantronics DE-9600 daughter board on port B so if you have this (or
-something similar) then you're right.
-
-To compile in the driver, put the files in the correct place and patch in
-the diff. You will have to re-configure the kernel again before you
-recompile it.
-
-The driver is not real good at the moment for finding the card. You can
-'help' it by changing the order of the potential addresses in the structure
-found in the pt_init() function so the address of where the card is is put
-first.
-
-After compiling, you have to get them going, they are pretty well like any
-other net device and just need ifconfig to get them going.
-As an example, here is my /etc/rc.net
---------------------------
-
-#
-# Configure the PackeTwin, port A.
-/sbin/ifconfig pt0a 44.136.8.87 hw ax25 vk2xlz mtu 512
-/sbin/ifconfig pt0a 44.136.8.87 broadcast 44.136.8.255 netmask 255.255.255.0
-/sbin/route add -net 44.136.8.0 netmask 255.255.255.0 dev pt0a
-/sbin/route add -net 44.0.0.0 netmask 255.0.0.0 gw 44.136.8.68 dev pt0a
-/sbin/route add -net 138.25.16.0 netmask 255.255.240.0 dev pt0a
-/sbin/route add -host 44.136.8.255 dev pt0a
-#
-# Configure the PackeTwin, port B.
-/sbin/ifconfig pt0b 44.136.8.87 hw ax25 vk2xlz-1 mtu 512
-/sbin/ifconfig pt0b 44.136.8.87 broadcast 44.255.255.255 netmask 255.0.0.0
-/sbin/route add -host 44.136.8.216 dev pt0b
-/sbin/route add -host 44.136.8.95 dev pt0b
-/sbin/route add -host 44.255.255.255 dev pt0b
-
-This version of the driver comes under the GNU GPL. If you have one of my
-previous (non-GPL) versions of the driver, please update to this one.
-
-I hope that this all works well for you. I would be pleased to hear how
-many people use the driver and if it does its job.
-
- - Craig vk2xlz <csmall@small.dropbear.id.au>
diff --git a/Documentation/networking/routing.txt b/Documentation/networking/routing.txt
deleted file mode 100644
index a26838b..0000000
--- a/Documentation/networking/routing.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-The directory ftp.inr.ac.ru:/ip-routing contains:
-
-- iproute.c - "professional" routing table maintenance utility.
-
-- rdisc.tar.gz - rdisc daemon, ported from Sun.
- STRONGLY RECOMMENDED FOR ALL HOSTS.
-
-- routing.tgz - original Mike McLagan's route by source patch.
- Currently it is obsolete.
-
-- gated.dif-ss<NEWEST>.gz - gated-R3_6Alpha_2 fixes.
- Look at README.gated
-
-- mrouted-3.8.dif.gz - mrouted-3.8 fixes.
-
-- rtmon.c - trivial debugging utility: reads and stores netlink.
-
-
-NEWS for user.
-
-- Policy based routing. Routing decisions are made on the basis
- not only of destination address, but also source address,
- TOS and incoming interface.
-- Complete set of IP level control messages.
- Now Linux is the only OS in the world complying to RFC requirements.
- Great win 8)
-- New interface addressing paradigm.
- Assignment of address ranges to interface,
- multiple prefixes etc. etc.
- Do not bother, it is compatible with the old one. Moreover:
-- You don't need to do "route add aaa.bbb.ccc... eth0" anymore,
- it is done automatically.
-- "Abstract" UNIX sockets and security enhancements.
- This is necessary to use TIRPC and TLI emulation library.
-
-NEWS for hacker.
-
-- New destination cache. Flexible, robust and just beautiful.
-- Network stack is reordered, simplified, optimized, a lot of bugs fixed.
- (well, and new bugs were introduced, but I haven't seen them yet 8))
- It is difficult to describe all the changes, look into source.
-
-If you see this file, then this patch works 8)
-
-Alexey Kuznetsov.
-kuznet@ms2.inr.ac.ru
diff --git a/Documentation/networking/slicecom.hun b/Documentation/networking/slicecom.hun
deleted file mode 100644
index bed2f04..0000000
--- a/Documentation/networking/slicecom.hun
+++ /dev/null
@@ -1,371 +0,0 @@
-
-SliceCOM adapter felhasznaloi dokumentacioja - 0.51 verziohoz
-
-Bartók István <bartoki@itc.hu>
-Utolso modositas: Wed Aug 29 17:26:58 CEST 2001
-
------------------------------------------------------------------
-
-Hasznalata:
-
-Forditas:
-
-Code maturity level options
- [*] Prompt for development and/or incomplete code/drivers
-
-Network device support
- Wan interfaces
- <M> MultiGate (COMX) synchronous
- <M> Support for MUNICH based boards: SliceCOM, PCICOM (NEW)
- <M> Support for HDLC and syncPPP...
-
-
-A modulok betoltese:
-
-modprobe comx
-
-modprobe comx-proto-ppp # a Cisco-HDLC es a SyncPPP protokollt is
- # ez a modul adja
-
-modprobe comx-hw-munich # a modul betoltodeskor azonnal jelent a
- # syslogba a detektalt kartyakrol
-
-
-Konfiguralas:
-
-# Ezen az interfeszen Cisco-HDLC vonali protokoll fog futni
-# Az interfeszhez rendelt idoszeletek: 1,2 (128 kbit/sec-es vonal)
-# (a G.703 keretben az elso adatot vivo idoszelet az 1-es)
-#
-mkdir /proc/comx/comx0.1/
-echo slicecom >/proc/comx/comx0.1/boardtype
-echo hdlc >/proc/comx/comx0.1/protocol
-echo 1 2 >/proc/comx/comx0.1/timeslots
-
-
-# Ezen az interfeszen SyncPPP vonali protokoll fog futni
-# Az interfeszhez rendelt idoszelet: 3 (64 kbit/sec-es vonal)
-#
-mkdir /proc/comx/comx0.2/
-echo slicecom >/proc/comx/comx0.2/boardtype
-echo ppp >/proc/comx/comx0.2/protocol
-echo 3 >/proc/comx/comx0.2/timeslots
-
-...
-
-ifconfig comx0.1 up
-ifconfig comx0.2 up
-
------------------------------------------------------------------
-
-A COMX driverek default 20 csomagnyi transmit queue-t rendelnek a halozati
-interfeszekhez. WAN halozatokban ennel hosszabbat is szokas hasznalni
-(20 es 100 kozott), hogy a vonal kihasznaltsaga nagy terheles eseten jobb
-legyen (bar ezzel megno a varhato kesleltetes a csomagok sorban allasa miatt):
-
-# ifconfig comx0 txqueuelen 50
-
-Ezt a beallitasi lehetoseget csak az ujabb disztribuciok ifconfig parancsa
-tamogatja (amik mar a 2.2 kernelekhez keszultek, mint a RedHat 6.1 vagy a
-Debian 2.2).
-
-A 2.1-es Debian disztribuciohoz a http://www.debian.org/~rcw/2.2/netbase/
-cimrol toltheto le ujabb netbase csomag, ami mar ilyet tamogato ifconfig
-parancsot tartalmaz. Bovebben a 2.2 kernel hasznalatarol Debian 2.1 alatt:
-http://www.debian.org/releases/stable/running-kernel-2.2
-
------------------------------------------------------------------
-
-A kartya LED-jeinek jelentese:
-
-piros - eg, ha Remote Alarm-ot kuld a tuloldal
-zold - eg, ha a vett jelben megtalalja a keretszinkront
-
-Reszletesebben:
-
-piros: zold: jelentes:
-
-- - nincs keretszinkron (nincs jel, vagy rossz a jel)
-- eg "minden rendben"
-eg eg a vetel OK, de a tuloldal Remote Alarm-ot kuld
-eg - ez nincs ertelmezve, egyelore funkcio nelkul
-
------------------------------------------------------------------
-
-Reszletesebb leiras a hardver beallitasi lehetosegeirol:
-
-Az altalanos,- es a protokoll-retegek beallitasi lehetosegeirol a 'comx.txt'
-fajlban leirtak SliceCOM kartyanal is ervenyesek, itt csak a hardver-specifikus
-beallitasi lehetosegek vannak osszefoglalva:
-
-Konfiguralasi interfesz a /proc/comx/ alatt:
-
-Minden timeslot-csoportnak kulon comx* interfeszt kell letrehozni mkdir-rel:
-comx0, comx1, .. stb. Itt beallithato, hogy az adott interfesz hanyadik kartya
-melyik timeslotja(i)bol alljon ossze. A Cisco-fele serial3:1 elnevezesek
-(serial3:1 = a 3. kartyaban az 1-es idoszelet-csoport) Linuxon aliasing-ot
-jelentenenek, ezert mi nem tudunk ilyen elnevezest hasznalni.
-
-Tobb kartya eseten a comx0.1, comx0.2, ... vagy slice0.1, slice0.2 nevek
-hasznalhatoak.
-
-Tobb SliceCOM kartya is lehet egy gepben, de sajat interrupt kell mindegyiknek,
-nem tud meg megosztott interruptot kezelni.
-
-Az egesz kartyat erinto beallitasok:
-
-Az ioport es irq beallitas nincs: amit a PCI BIOS kioszt a rendszernek,
-azt hasznalja a driver.
-
-
-comx0/boardnum - hanyadik SliceCOM kartya a gepben (a 'termeszetes' PCI
- sorrendben ertve: ahogyan a /proc/pci-ban vagy az 'lspci'
- kimeneteben megjelenik, altalaban az alaplapi PCI meghajto
- aramkorokhoz kozelebb eso kartyak a kisebb sorszamuak)
-
- Default: 0 (0-tol kezdodik a szamolas)
-
-
-Bar a kovetkezoket csak egy-egy interfeszen allitjuk at, megis az egesz kartya
-mukodeset egyszerre allitjak. A megkotes hogy csak UP-ban levo interfeszen
-hasznalhatoak, azert van, mert kulonben nem vart eredmenyekre vezetne egy ilyen
-paranccsorozat:
-
- echo 0 >boardnum
- echo internal >clock_source
- echo 1 >boardnum
-
-- Ez a 0-s board clock_source-at allitana at.
-
-Ezek a beallitasok megmaradnak az osszes interfesz torlesekor, de torlodnek
-a driver modul ki/betoltesekor.
-
-
-comx0/clock_source - A Tx orajelforrasa, a Cisco-val hasonlatosra keszult.
- Hasznalata:
-
- papaya:# echo line >/proc/comx/comx0/clock_source
- papaya:# echo internal >/proc/comx/comx0/clock_source
-
- line - A Tx orajelet a vett adatfolyambol dekodolja, igyekszik
- igazodni hozza. Ha nem lat orajelet az inputon, akkor
- atall a sajat orajelgeneratorara.
- internal - A Tx orajelet a sajat orajelgeneratora szolgaltatja.
-
- Default: line
-
- Normal osszeallitas eseten a tavkozlesi szolgaltato eszkoze
- (pl. HDSL modem) adja az orajelet, ezert ez a default.
-
-
-comx0/framing - A CRC4 ki/be kapcsolasa
-
- A CRC4: 16 PCM keretet (A PCM keret az, amibe a 32 darab 64
- kilobites csatorna van bemultiplexalva. Nem osszetevesztendo a HDLC
- kerettel.) 2x8 -as csoportokra osztanak, es azokhoz 4-4 bites CRC-t
- szamolnak. Elsosorban a vonal minosegenek a monitorozasara szolgal.
-
- papaya:~# echo crc4 >/proc/comx/comx0/framing
- papaya:~# echo no-crc4 >/proc/comx/comx0/framing
-
- Default a 'crc4', a MATAV vonalak altalaban igy futnak. De ha nem
- egyforma is a beallitas a vonal ket vegen, attol a forgalom altalaban
- at tud menni.
-
-
-comx0/linecode - A vonali kodolas beallitasa
-
- papaya:~# echo hdb3 >/proc/comx/comx0/linecode
- papaya:~# echo ami >/proc/comx/comx0/linecode
-
- Default a 'hdb3', a MATAV vonalak igy futnak.
-
- (az AMI kodolas igen ritka E1-es vonalaknal). Ha ez a beallitas nem
- egyezik a vonal ket vegen, akkor elofordulhat hogy a keretszinkron
- osszejon, de CRC4-hibak es a vonalakon atvitt adatokban is hibak
- keletkeznek (amit a HDLC/SyncPPP szinten CRC-hibaval jelez)
-
-
-comx0/reg - a kartya aramkoreinek, a MUNICH (reg) es a FALC (lbireg)
-comx0/lbireg regisztereinek kozvetlen elerese. Hasznalata:
-
- echo >reg 0x04 0x0 - a 4-es regiszterbe 0-t ir
- echo >reg 0x104 - printk()-val kiirja a 4-es regiszter
- tartalmat a syslogba.
-
- WARNING: ezek csak a fejleszteshez keszultek, sok galibat
- lehet veluk okozni!
-
-
-comx0/loopback - A kartya G.703 jelenek a visszahurkolasara is van lehetoseg:
-
- papaya:# echo none >/proc/comx/comx0/loopback
- papaya:# echo local >/proc/comx/comx0/loopback
- papaya:# echo remote >/proc/comx/comx0/loopback
-
- none - nincs visszahurkolas, normal mukodes
- local - a kartya a sajat maga altal adott jelet kapja vissza
- remote - a kartya a kivulrol vett jelet adja kifele
-
- Default: none
-
------------------------------------------------------------------
-
-Az interfeszhez (Cisco terminologiaban 'channel-group') kapcsolodo beallitasok:
-
-comx0/timeslots - mely timeslotok (idoszeletek) tartoznak az adott interfeszhez.
-
- papaya:~# cat /proc/comx/comx0/timeslots
- 1 3 4 5 6
- papaya:~#
-
- Egy timeslot megkeresese (hanyas interfeszbe tartozik nalunk):
-
- papaya:~# grep ' 4' /proc/comx/comx*/timeslots
- /proc/comx/comx0/timeslots:1 3 4 5 6
- papaya:~#
-
- Beallitasa:
- papaya:~# echo '1 5 2 6 7 8' >/proc/comx/comx0/timeslots
-
- A timeslotok sorrendje nem szamit, '1 3 2' ugyanaz mint az '1 2 3'.
-
- Beallitashoz az adott interfesznek DOWN-ban kell lennie
- (ifconfig comx0 down), de ugyanannak a kartyanak a tobbi interfesze
- uzemelhet kozben.
-
- Beallitaskor leellenorzi, hogy az uj timeslotok nem utkoznek-e egy
- masik interfesz timeslotjaival. Ha utkoznek, akkor nem allitja at.
-
- Mindig 10-es szamrendszerben tortenik a timeslotok ertelmezese, nehogy
- a 08, 09 alaku felirast rosszul ertelmezze.
-
------------------------------------------------------------------
-
-Az interfeszek es a kartya allapotanak lekerdezese:
-
-- A ' '-szel kezdodo sorok az eredeti kimenetet, a //-rel kezdodo sorok a
-magyarazatot jelzik.
-
- papaya:~$ cat /proc/comx/comx1/status
- Interface administrative status is UP, modem status is UP, protocol is UP
- Modem status changes: 0, Transmitter status is IDLE, tbusy: 0
- Interface load (input): 978376 / 947808 / 951024 bits/s (5s/5m/15m)
- (output): 978376 / 947848 / 951024 bits/s (5s/5m/15m)
- Debug flags: none
- RX errors: len: 22, overrun: 1, crc: 0, aborts: 0
- buffer overrun: 0, pbuffer overrun: 0
- TX errors: underrun: 0
- Line keepalive (value: 10) status UP [0]
-
-// Itt kezdodik a hardver-specifikus resz:
- Controller status:
- No alarms
-
-// Alarm: hibajelzes:
-//
-// No alarms - minden rendben
-//
-// LOS - Loss Of Signal - nem erzekel jelet a bemeneten.
-// AIS - Alarm Indication Signal - csak egymas utani 1-esek jonnek
-// a bemeneten, a tuloldal igy is jelezheti hogy meghibasodott vagy
-// nincs inicializalva.
-// AUXP - Auxiliary Pattern Indication - 01010101.. sorozat jon a bemeneten.
-// LFA - Loss of Frame Alignment - nincs keretszinkron
-// RRA - Receive Remote Alarm - a tuloldal el, de hibat jelez.
-// LMFA - Loss of CRC4 Multiframe Alignment - nincs CRC4-multikeret-szinkron
-// NMF - No Multiframe alignment Found after 400 msec - ilyen alarm a no-crc4
-// es crc4 keretezesek eseten nincs, lasd lentebb
-//
-// Egyeb lehetseges hibajelzesek:
-//
-// Transmit Line Short - a kartya ugy erzi hogy az adasi kimenete rovidre
-// van zarva, ezert kikapcsolta az adast. (nem feltetlenul veszi eszre
-// a kulso rovidzarat)
-
-// A veteli oldal csomagjainak lancolt listai, debug celokra:
-
- Rx ring:
- rafutott: 0
- lastcheck: 50845731, jiffies: 51314281
- base: 017b1858
- rx_desc_ptr: 0
- rx_desc_ptr: 017b1858
- hw_curr_ptr: 017b1858
- 06040000 017b1868 017b1898 c016ff00
- 06040000 017b1878 017b1e9c c016ff00
- 46040000 017b1888 017b24a0 c016ff00
- 06040000 017b1858 017b2aa4 c016ff00
-
-// A kartyat hasznalo tobbi interfesz: a 0-s channel-group a comx1 interfesz,
-// es az 1,2,...,16 timeslotok tartoznak hozza:
-
- Interfaces using this board: (channel-group, interface, timeslots)
- 0 comx1: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
- 1 comx2: 17
- 2 comx3: 18
- 3 comx4: 19
- 4 comx5: 20
- 5 comx6: 21
- 6 comx7: 22
- 7 comx8: 23
- 8 comx9: 24
- 9 comx10: 25
- 10 comx11: 26
- 11 comx12: 27
- 12 comx13: 28
- 13 comx14: 29
- 14 comx15: 30
- 15 comx16: 31
-
-// Hany esemenyt kezelt le a driver egy-egy hardver-interrupt kiszolgalasanal:
-
- Interrupt work histogram:
- hist[ 0]: 0 hist[ 1]: 2 hist[ 2]: 18574 hist[ 3]: 79
- hist[ 4]: 14 hist[ 5]: 1 hist[ 6]: 0 hist[ 7]: 1
- hist[ 8]: 0 hist[ 9]: 7
-
-// Hany kikuldendo csomag volt mar a Tx-ringben amikor ujabb lett irva bele:
-
- Tx ring histogram:
- hist[ 0]: 2329 hist[ 1]: 0 hist[ 2]: 0 hist[ 3]: 0
-
-// Az E1-interfesz hiba-szamlaloi, az rfc2495-nek megfeleloen:
-// (kb. a Cisco routerek "show controllers e1" formatumaban: http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/rbook/rinterfc.htm#xtocid25669126)
-
-Data in current interval (91 seconds elapsed):
- 9516 Line Code Violations, 65 Path Code Violations, 2 E-Bit Errors
- 0 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins
- 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 11 Unavail Secs
-Data in Interval 1 (15 minutes):
- 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
- 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
- 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-Data in last 4 intervals (1 hour):
- 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
- 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
- 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-Data in last 96 intervals (24 hours):
- 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
- 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
- 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-
------------------------------------------------------------------
-
-Nehany kulonlegesebb beallitasi lehetoseg (idovel beepulhetnek majd a driverbe):
-Ezekkel sok galibat lehet okozni, nagyon ovatosan kell oket hasznalni!
-
- modified CRC-4, for improved interworking of CRC-4 and non-CRC-4
- devices: (lasd page 107 es g706 Annex B)
- lbireg[ 0x1b ] |= 0x08
- lbireg[ 0x1c ] |= 0xc0
- - ilyenkor ertelmezett az NMF - 'No Multiframe alignment Found after
- 400 msec' alarm.
-
- FALC - a vonali meghajto IC
- local loop - a sajat adasomat halljam vissza
- remote loop - a kivulrol jovo adast adom vissza
-
- Egy hibakeresesre hasznalhato dolog:
- - 1-es timeslot local loop a FALC-ban: echo >lbireg 0x1d 0x21
- - local loop kikapcsolasa: echo >lbireg 0x1d 0x00
diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt
deleted file mode 100644
index c82c0cf..0000000
--- a/Documentation/networking/slicecom.txt
+++ /dev/null
@@ -1,369 +0,0 @@
-
-SliceCOM adapter user's documentation - for the 0.51 driver version
-
-Written by Bartók István <bartoki@itc.hu>
-
-English translation: Lakatos György <gyuri@itc.hu>
-Mon Dec 11 15:28:42 CET 2000
-
-Last modified: Wed Aug 29 17:25:37 CEST 2001
-
------------------------------------------------------------------
-
-Usage:
-
-Compiling the kernel:
-
-Code maturity level options
- [*] Prompt for development and/or incomplete code/drivers
-
-Network device support
- Wan interfaces
- <M> MultiGate (COMX) synchronous
- <M> Support for MUNICH based boards: SliceCOM, PCICOM (NEW)
- <M> Support for HDLC and syncPPP...
-
-
-Loading the modules:
-
-modprobe comx
-
-modprobe comx-proto-ppp # module for Cisco-HDLC and SyncPPP protocols
-
-modprobe comx-hw-munich # the module logs information by the kernel
- # about the detected boards
-
-
-Configuring the board:
-
-# This interface will use the Cisco-HDLC line protocol,
-# the timeslices assigned are 1,2 (128 KiBit line speed)
-# (the first data timeslice in the G.703 frame is no. 1)
-#
-mkdir /proc/comx/comx0.1/
-echo slicecom >/proc/comx/comx0.1/boardtype
-echo hdlc >/proc/comx/comx0.1/protocol
-echo 1 2 >/proc/comx/comx0.1/timeslots
-
-
-# This interface uses SyncPPP line protocol, the assigned
-# is no. 3 (64 KiBit line speed)
-#
-mkdir /proc/comx/comx0.2/
-echo slicecom >/proc/comx/comx0.2/boardtype
-echo ppp >/proc/comx/comx0.2/protocol
-echo 3 >/proc/comx/comx0.2/timeslots
-
-...
-
-ifconfig comx0.1 up
-ifconfig comx0.2 up
-
------------------------------------------------------------------
-
-The COMX interfaces use a 10 packet transmit queue by default, however WAN
-networks sometimes use bigger values (20 to 100), to utilize the line better
-by large traffic (though the line delay increases because of more packets
-join the queue).
-
-# ifconfig comx0 txqueuelen 50
-
-This option is only supported by the ifconfig command of the later
-distributions, which came with 2.2 kernels, such as RedHat 6.1 or Debian 2.2.
-
-You can download a newer netbase packet from
-http://www.debian.org/~rcw/2.2/netbase/ for Debian 2.1, which has a new
-ifconfig. You can get further information about using 2.2 kernel with
-Debian 2.1 from http://www.debian.org/releases/stable/running-kernel-2.2
-
------------------------------------------------------------------
-
-The SliceCom LEDs:
-
-red - on, if the interface is unconfigured, or it gets Remote Alarm-s
-green - on, if the board finds frame-sync in the received signal
-
-A bit more detailed:
-
-red: green: meaning:
-
-- - no frame-sync, no signal received, or signal SNAFU.
-- on "Everything is OK"
-on on Reception is ok, but the remote end sends Remote Alarm
-on - The interface is unconfigured
-
------------------------------------------------------------------
-
-A more detailed description of the hardware setting options:
-
-The general and the protocol layer options described in the 'comx.txt' file
-apply to the SliceCom as well, I only summarize the SliceCom hardware specific
-settings below.
-
-The '/proc/comx' configuring interface:
-
-An interface directory should be created for every timeslot group with
-'mkdir', e,g: 'comx0', 'comx1' etc. The timeslots can be assigned here to the
-specific interface. The Cisco-like naming convention (serial3:1 - first
-timeslot group of the 3rd. board) can't be used here, because these mean IP
-aliasing in Linux.
-
-You can give any meaningful name to keep the configuration clear;
-e.g: 'comx0.1', 'comx0.2', 'comx1.1', comx1.2', if you have two boards
-with two interfaces each.
-
-Settings, which apply to the board:
-
-Neither 'io' nor 'irq' settings required, the driver uses the resources
-given by the PCI BIOS.
-
-comx0/boardnum - board number of the SliceCom in the PC (using the 'natural'
- PCI order) as listed in '/proc/pci' or the output of the
- 'lspci' command, generally the slots nearer to the motherboard
- PCI driver chips have the lower numbers.
-
- Default: 0 (the counting starts with 0)
-
-Though the options below are to be set on a single interface, they apply to the
-whole board. The restriction, to use them on 'UP' interfaces, is because the
-command sequence below could lead to unpredictable results.
-
- # echo 0 >boardnum
- # echo internal >clock_source
- # echo 1 >boardnum
-
-The sequence would set the clock source of board 0.
-
-These settings will persist after all the interfaces are cleared, but are
-cleared when the driver module is unloaded and loaded again.
-
-comx0/clock_source - source of the transmit clock
- Usage:
-
- # echo line >/proc/comx/comx0/clock_source
- # echo internal >/proc/comx/comx0/clock_source
-
- line - The Tx clock is being decoded if the input data stream,
- if no clock seen on the input, then the board will use it's
- own clock generator.
-
- internal - The Tx clock is supplied by the builtin clock generator.
-
- Default: line
-
- Normally, the telecommunication company's end device (the HDSL
- modem) provides the Tx clock, that's why 'line' is the default.
-
-comx0/framing - Switching CRC4 off/on
-
- CRC4: 16 PCM frames (The 32 64Kibit channels are multiplexed into a
- PCM frame, nothing to do with HDLC frames) are divided into 2x8
- groups, each group has a 4 bit CRC.
-
- # echo crc4 >/proc/comx/comx0/framing
- # echo no-crc4 >/proc/comx/comx0/framing
-
- Default is 'crc4', the Hungarian MATAV lines behave like this.
- The traffic generally passes if this setting on both ends don't match.
-
-comx0/linecode - Setting the line coding
-
- # echo hdb3 >/proc/comx/comx0/linecode
- # echo ami >/proc/comx/comx0/linecode
-
- Default a 'hdb3', MATAV lines use this.
-
- (AMI coding is rarely used with E1 lines). Frame sync may occur, if
- this setting doesn't match the other end's, but CRC4 and data errors
- will come, which will result in CRC errors on HDLC/SyncPPP level.
-
-comx0/reg - direct access to the board's MUNICH (reg) and FALC (lbireg)
-comx0/lbireg circuit's registers
-
- # echo >reg 0x04 0x0 - write 0 to register 4
- # echo >reg 0x104 - write the contents of register 4 with
- printk() to syslog
-
-WARNING! These are only for development purposes, messing with this will
- result much trouble!
-
-comx0/loopback - Places a loop to the board's G.703 signals
-
- # echo none >/proc/comx/comx0/loopback
- # echo local >/proc/comx/comx0/loopback
- # echo remote >/proc/comx/comx0/loopback
-
- none - normal operation, no loop
- local - the board receives it's own output
- remote - the board sends the received data to the remote side
-
- Default: none
-
------------------------------------------------------------------
-
-Interface (channel group in Cisco terms) settings:
-
-comx0/timeslots - which timeslots belong to the given interface
-
- Setting:
-
- # echo '1 5 2 6 7 8' >/proc/comx/comx0/timeslots
-
- # cat /proc/comx/comx0/timeslots
- 1 2 5 6 7 8
- #
-
- Finding a timeslot:
-
- # grep ' 4' /proc/comx/comx*/timeslots
- /proc/comx/comx0/timeslots:1 3 4 5 6
- #
-
- The timeslots can be in any order, '1 2 3' is the same as '1 3 2'.
-
- The interface has to be DOWN during the setting ('ifconfig comx0
- down'), but the other interfaces could operate normally.
-
- The driver checks if the assigned timeslots are vacant, if not, then
- the setting won't be applied.
-
- The timeslot values are treated as decimal numbers, not to misunderstand
- values of 08, 09 form.
-
------------------------------------------------------------------
-
-Checking the interface and board status:
-
-- Lines beginning with ' ' (space) belong to the original output, the lines
-which begin with '//' are the comments.
-
- papaya:~$ cat /proc/comx/comx1/status
- Interface administrative status is UP, modem status is UP, protocol is UP
- Modem status changes: 0, Transmitter status is IDLE, tbusy: 0
- Interface load (input): 978376 / 947808 / 951024 bits/s (5s/5m/15m)
- (output): 978376 / 947848 / 951024 bits/s (5s/5m/15m)
- Debug flags: none
- RX errors: len: 22, overrun: 1, crc: 0, aborts: 0
- buffer overrun: 0, pbuffer overrun: 0
- TX errors: underrun: 0
- Line keepalive (value: 10) status UP [0]
-
-// The hardware specific part starts here:
- Controller status:
- No alarms
-
-// Alarm:
-//
-// No alarms - Everything OK
-//
-// LOS - Loss Of Signal - No signal sensed on the input
-// AIS - Alarm Indication Signal - The remote side sends '11111111'-s,
-// it tells, that there's an error condition, or it's not
-// initialised.
-// AUXP - Auxiliary Pattern Indication - 01010101.. received.
-// LFA - Loss of Frame Alignment - no frame sync received.
-// RRA - Receive Remote Alarm - the remote end's OK, but signals error cond.
-// LMFA - Loss of CRC4 Multiframe Alignment - no CRC4 multiframe sync.
-// NMF - No Multiframe alignment Found after 400 msec - no such alarm using
-// no-crc4 or crc4 framing, see below.
-//
-// Other possible error messages:
-//
-// Transmit Line Short - the board felt, that it's output is short-circuited,
-// so it switched the transmission off. (The board can't definitely tell,
-// that it's output is short-circuited.)
-
-// Chained list of the received packets, for debug purposes:
-
- Rx ring:
- rafutott: 0
- lastcheck: 50845731, jiffies: 51314281
- base: 017b1858
- rx_desc_ptr: 0
- rx_desc_ptr: 017b1858
- hw_curr_ptr: 017b1858
- 06040000 017b1868 017b1898 c016ff00
- 06040000 017b1878 017b1e9c c016ff00
- 46040000 017b1888 017b24a0 c016ff00
- 06040000 017b1858 017b2aa4 c016ff00
-
-// All the interfaces using the board: comx1, using the 1,2,...16 timeslots,
-// comx2, using timeslot 17, etc.
-
- Interfaces using this board: (channel-group, interface, timeslots)
- 0 comx1: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
- 1 comx2: 17
- 2 comx3: 18
- 3 comx4: 19
- 4 comx5: 20
- 5 comx6: 21
- 6 comx7: 22
- 7 comx8: 23
- 8 comx9: 24
- 9 comx10: 25
- 10 comx11: 26
- 11 comx12: 27
- 12 comx13: 28
- 13 comx14: 29
- 14 comx15: 30
- 15 comx16: 31
-
-// The number of events handled by the driver during an interrupt cycle:
-
- Interrupt work histogram:
- hist[ 0]: 0 hist[ 1]: 2 hist[ 2]: 18574 hist[ 3]: 79
- hist[ 4]: 14 hist[ 5]: 1 hist[ 6]: 0 hist[ 7]: 1
- hist[ 8]: 0 hist[ 9]: 7
-
-// The number of packets to send in the Tx ring, when a new one arrived:
-
- Tx ring histogram:
- hist[ 0]: 2329 hist[ 1]: 0 hist[ 2]: 0 hist[ 3]: 0
-
-// The error counters of the E1 interface, according to the RFC2495,
-// (similar to the Cisco "show controllers e1" command's output:
-// http://www.cisco.com/univercd/cc/td/doc/product/software/ios11/rbook/rinterfc.htm#xtocid25669126)
-
-Data in current interval (91 seconds elapsed):
- 9516 Line Code Violations, 65 Path Code Violations, 2 E-Bit Errors
- 0 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins
- 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 11 Unavail Secs
-Data in Interval 1 (15 minutes):
- 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
- 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
- 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-Data in last 4 intervals (1 hour):
- 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
- 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
- 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-Data in last 96 intervals (24 hours):
- 0 Line Code Violations, 0 Path Code Violations, 0 E-Bit Errors
- 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
- 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
-
------------------------------------------------------------------
-
-Some unique options, (may get into the driver later):
-Treat them very carefully, these can cause much trouble!
-
- modified CRC-4, for improved interworking of CRC-4 and non-CRC-4
- devices: (see page 107 and g706 Annex B)
- lbireg[ 0x1b ] |= 0x08
- lbireg[ 0x1c ] |= 0xc0
-
- - The NMF - 'No Multiframe alignment Found after 400 msec' alarm
- comes into account.
-
- FALC - the line driver chip.
- local loop - I hear my transmission back.
- remote loop - I echo the remote transmission back.
-
- Something useful for finding errors:
-
- - local loop for timeslot 1 in the FALC chip:
-
- # echo >lbireg 0x1d 0x21
-
- - Switching the loop off:
-
- # echo >lbireg 0x1d 0x00
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index a96e853..ac1be25 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -52,6 +52,7 @@
i) Freescale QUICC Engine module (QE)
j) CFI or JEDEC memory-mapped NOR flash
k) Global Utilities Block
+ l) Xilinx IP cores
VII - Specifying interrupt information for devices
1) interrupts property
@@ -851,12 +852,18 @@
/cpus/PowerPC,970FX@0
/cpus/PowerPC,970FX@1
(unit addresses do not require leading zeroes)
- - d-cache-line-size : one cell, L1 data cache line size in bytes
- - i-cache-line-size : one cell, L1 instruction cache line size in
+ - d-cache-block-size : one cell, L1 data cache block size in bytes (*)
+ - i-cache-block-size : one cell, L1 instruction cache block size in
bytes
- d-cache-size : one cell, size of L1 data cache in bytes
- i-cache-size : one cell, size of L1 instruction cache in bytes
+(*) The cache "block" size is the size on which the cache management
+instructions operate. Historically, this document used the cache
+"line" size here which is incorrect. The kernel will prefer the cache
+block size and will fallback to cache line size for backward
+compatibility.
+
Recommended properties:
- timebase-frequency : a cell indicating the frequency of the
@@ -870,6 +877,10 @@
for the above, the common code doesn't use that property, but
you are welcome to re-use the pSeries or Maple one. A future
kernel version might provide a common function for this.
+ - d-cache-line-size : one cell, L1 data cache line size in bytes
+ if different from the block size
+ - i-cache-line-size : one cell, L1 instruction cache line size in
+ bytes if different from the block size
You are welcome to add any property you find relevant to your board,
like some information about the mechanism used to soft-reset the
@@ -2242,6 +2253,266 @@
available.
For Axon: 0x0000012a
+ l) Xilinx IP cores
+
+ The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+ in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
+ of standard device types (network, serial, etc.) and miscellanious
+ devices (gpio, LCD, spi, etc). Also, since these devices are
+ implemented within the fpga fabric every instance of the device can be
+ synthesised with different options that change the behaviour.
+
+ Each IP-core has a set of parameters which the FPGA designer can use to
+ control how the core is synthesized. Historically, the EDK tool would
+ extract the device parameters relevant to device drivers and copy them
+ into an 'xparameters.h' in the form of #define symbols. This tells the
+ device drivers how the IP cores are configured, but it requres the kernel
+ to be recompiled every time the FPGA bitstream is resynthesized.
+
+ The new approach is to export the parameters into the device tree and
+ generate a new device tree each time the FPGA bitstream changes. The
+ parameters which used to be exported as #defines will now become
+ properties of the device node. In general, device nodes for IP-cores
+ will take the following form:
+
+ (name)@(base-address) {
+ compatible = "xlnx,(ip-core-name)-(HW_VER)"
+ [, (list of compatible devices), ...];
+ reg = <(baseaddr) (size)>;
+ interrupt-parent = <&interrupt-controller-phandle>;
+ interrupts = < ... >;
+ xlnx,(parameter1) = "(string-value)";
+ xlnx,(parameter2) = <(int-value)>;
+ };
+
+ (ip-core-name): the name of the ip block (given after the BEGIN
+ directive in system.mhs). Should be in lowercase
+ and all underscores '_' converted to dashes '-'.
+ (name): is derived from the "PARAMETER INSTANCE" value.
+ (parameter#): C_* parameters from system.mhs. The C_ prefix is
+ dropped from the parameter name, the name is converted
+ to lowercase and all underscore '_' characters are
+ converted to dashes '-'.
+ (baseaddr): the C_BASEADDR parameter.
+ (HW_VER): from the HW_VER parameter.
+ (size): equals C_HIGHADDR - C_BASEADDR + 1
+
+ Typically, the compatible list will include the exact IP core version
+ followed by an older IP core version which implements the same
+ interface or any other device with the same interface.
+
+ 'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+ For example, the following block from system.mhs:
+
+ BEGIN opb_uartlite
+ PARAMETER INSTANCE = opb_uartlite_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BAUDRATE = 115200
+ PARAMETER C_DATA_BITS = 8
+ PARAMETER C_ODD_PARITY = 0
+ PARAMETER C_USE_PARITY = 0
+ PARAMETER C_CLK_FREQ = 50000000
+ PARAMETER C_BASEADDR = 0xEC100000
+ PARAMETER C_HIGHADDR = 0xEC10FFFF
+ BUS_INTERFACE SOPB = opb_7
+ PORT OPB_Clk = CLK_50MHz
+ PORT Interrupt = opb_uartlite_0_Interrupt
+ PORT RX = opb_uartlite_0_RX
+ PORT TX = opb_uartlite_0_TX
+ PORT OPB_Rst = sys_bus_reset_0
+ END
+
+ becomes the following device tree node:
+
+ opb-uartlite-0@ec100000 {
+ device_type = "serial";
+ compatible = "xlnx,opb-uartlite-1.00.b";
+ reg = <ec100000 10000>;
+ interrupt-parent = <&opb-intc>;
+ interrupts = <1 0>; // got this from the opb_intc parameters
+ current-speed = <d#115200>; // standard serial device prop
+ clock-frequency = <d#50000000>; // standard serial device prop
+ xlnx,data-bits = <8>;
+ xlnx,odd-parity = <0>;
+ xlnx,use-parity = <0>;
+ };
+
+ Some IP cores actually implement 2 or more logical devices. In this case,
+ the device should still describe the whole IP core with a single node
+ and add a child node for each logical device. The ranges property can
+ be used to translate from parent IP-core to the registers of each device.
+ (Note: this makes the assumption that both logical devices have the same
+ bus binding. If this is not true, then separate nodes should be used for
+ each logical device). The 'cell-index' property can be used to enumerate
+ logical devices within an IP core. For example, the following is the
+ system.mhs entry for the dual ps2 controller found on the ml403 reference
+ design.
+
+ BEGIN opb_ps2_dual_ref
+ PARAMETER INSTANCE = opb_ps2_dual_ref_0
+ PARAMETER HW_VER = 1.00.a
+ PARAMETER C_BASEADDR = 0xA9000000
+ PARAMETER C_HIGHADDR = 0xA9001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ PORT Sys_Intr1 = ps2_1_intr
+ PORT Sys_Intr2 = ps2_2_intr
+ PORT Clkin1 = ps2_clk_rx_1
+ PORT Clkin2 = ps2_clk_rx_2
+ PORT Clkpd1 = ps2_clk_tx_1
+ PORT Clkpd2 = ps2_clk_tx_2
+ PORT Rx1 = ps2_d_rx_1
+ PORT Rx2 = ps2_d_rx_2
+ PORT Txpd1 = ps2_d_tx_1
+ PORT Txpd2 = ps2_d_tx_2
+ END
+
+ It would result in the following device tree nodes:
+
+ opb_ps2_dual_ref_0@a9000000 {
+ ranges = <0 a9000000 2000>;
+ // If this device had extra parameters, then they would
+ // go here.
+ ps2@0 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <0 40>;
+ interrupt-parent = <&opb-intc>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ ps2@1000 {
+ compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+ reg = <1000 40>;
+ interrupt-parent = <&opb-intc>;
+ interrupts = <3 0>;
+ cell-index = <0>;
+ };
+ };
+
+ Also, the system.mhs file defines bus attachments from the processor
+ to the devices. The device tree structure should reflect the bus
+ attachments. Again an example; this system.mhs fragment:
+
+ BEGIN ppc405_virtex4
+ PARAMETER INSTANCE = ppc405_0
+ PARAMETER HW_VER = 1.01.a
+ BUS_INTERFACE DPLB = plb_v34_0
+ BUS_INTERFACE IPLB = plb_v34_0
+ END
+
+ BEGIN opb_intc
+ PARAMETER INSTANCE = opb_intc_0
+ PARAMETER HW_VER = 1.00.c
+ PARAMETER C_BASEADDR = 0xD1000FC0
+ PARAMETER C_HIGHADDR = 0xD1000FDF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN opb_uart16550
+ PARAMETER INSTANCE = opb_uart16550_0
+ PARAMETER HW_VER = 1.00.d
+ PARAMETER C_BASEADDR = 0xa0000000
+ PARAMETER C_HIGHADDR = 0xa0001FFF
+ BUS_INTERFACE SOPB = opb_v20_0
+ END
+
+ BEGIN plb_v34
+ PARAMETER INSTANCE = plb_v34_0
+ PARAMETER HW_VER = 1.02.a
+ END
+
+ BEGIN plb_bram_if_cntlr
+ PARAMETER INSTANCE = plb_bram_if_cntlr_0
+ PARAMETER HW_VER = 1.00.b
+ PARAMETER C_BASEADDR = 0xFFFF0000
+ PARAMETER C_HIGHADDR = 0xFFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ END
+
+ BEGIN plb2opb_bridge
+ PARAMETER INSTANCE = plb2opb_bridge_0
+ PARAMETER HW_VER = 1.01.a
+ PARAMETER C_RNG0_BASEADDR = 0x20000000
+ PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+ PARAMETER C_RNG1_BASEADDR = 0x60000000
+ PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+ PARAMETER C_RNG2_BASEADDR = 0x80000000
+ PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+ PARAMETER C_RNG3_BASEADDR = 0xC0000000
+ PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+ BUS_INTERFACE SPLB = plb_v34_0
+ BUS_INTERFACE MOPB = opb_v20_0
+ END
+
+ Gives this device tree (some properties removed for clarity):
+
+ plb-v34-0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "ibm,plb";
+ ranges; // 1:1 translation
+
+ plb-bram-if-cntrl-0@ffff0000 {
+ reg = <ffff0000 10000>;
+ }
+
+ opb-v20-0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <20000000 20000000 20000000
+ 60000000 60000000 20000000
+ 80000000 80000000 40000000
+ c0000000 c0000000 20000000>;
+
+ opb-uart16550-0@a0000000 {
+ reg = <a00000000 2000>;
+ };
+
+ opb-intc-0@d1000fc0 {
+ reg = <d1000fc0 20>;
+ };
+ };
+ };
+
+ That covers the general approach to binding xilinx IP cores into the
+ device tree. The following are bindings for specific devices:
+
+ i) Xilinx ML300 Framebuffer
+
+ Simple framebuffer device from the ML300 reference design (also on the
+ ML403 reference design as well as others).
+
+ Optional properties:
+ - resolution = <xres yres> : pixel resolution of framebuffer. Some
+ implementations use a different resolution.
+ Default is <d#640 d#480>
+ - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+ Default is <d#1024 d#480>.
+ - rotate-display (empty) : rotate display 180 degrees.
+
+ ii) Xilinx SystemACE
+
+ The Xilinx SystemACE device is used to program FPGAs from an FPGA
+ bitstream stored on a CF card. It can also be used as a generic CF
+ interface device.
+
+ Optional properties:
+ - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+ iii) Xilinx EMAC and Xilinx TEMAC
+
+ Xilinx Ethernet devices. In addition to general xilinx properties
+ listed above, nodes for these devices should include a phy-handle
+ property, and may include other common network device properties
+ like local-mac-address.
+
+ iv) Xilinx Uartlite
+
+ Xilinx uartlite devices are simple fixed speed serial ports.
+
+ Requred properties:
+ - current-speed : Baud rate of uartlite
+
More devices will be defined as this spec matures.
VII - Specifying interrupt information for devices
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 4103c2c..b841ecf 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -197,7 +197,7 @@
/*
* free the memory that was only required for initialisation
*/
-void __init free_initmem(void)
+void free_initmem(void)
{
#if defined(CONFIG_RAMKERNEL) && !defined(CONFIG_PROTECT_KERNEL)
unsigned long start, end, addr;
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index fa681f5..754fa39 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -122,7 +122,9 @@
device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
- interrupts = <9 4 f 4>;
+ interrupts = <
+ f 4 /* Ethernet */
+ 9 4 /* Ethernet Wake Up */>;
local-mac-address = [000000000000]; /* Filled in by zImage */
reg = <ef600800 70>;
mal-device = <&MAL>;
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 39b27e5..31147a0 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -21,6 +21,14 @@
# (default ./arch/powerpc/boot)
# -W dir specify working directory for temporary files (default .)
+# Stop execution if any command fails
+set -e
+
+# Allow for verbose output
+if [ "$V" = 1 ]; then
+ set -x
+fi
+
# defaults
kernel=
ofile=zImage
@@ -111,7 +119,7 @@
if [ -z "$dtb" ]; then
dtb="$platform.dtb"
fi
- dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1
+ dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts"
fi
if [ -z "$kernel" ]; then
@@ -149,7 +157,6 @@
ps3)
platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
lds=$object/zImage.ps3.lds
- binary=y
gzip=
ext=bin
objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
@@ -233,7 +240,7 @@
if [ -n "$binary" ]; then
mv "$ofile" "$ofile".elf
- ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin
+ ${CROSS}objcopy -O binary "$ofile".elf "$ofile"
fi
# post-processing needed for some platforms
@@ -246,9 +253,9 @@
$object/hack-coff "$ofile"
;;
cuboot*)
- gzip -f -9 "$ofile".bin
+ gzip -f -9 "$ofile"
mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
- $uboot_version -d "$ofile".bin.gz "$ofile"
+ $uboot_version -d "$ofile".gz "$ofile"
;;
treeboot*)
mv "$ofile" "$ofile.elf"
@@ -269,11 +276,11 @@
# then copied to offset 0x100. At runtime the bootwrapper program
# copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
- system_reset_overlay=0x`${CROSS}nm "$ofile".elf \
+ system_reset_overlay=0x`${CROSS}nm "$ofile" \
| grep ' __system_reset_overlay$' \
| cut -d' ' -f1`
system_reset_overlay=`printf "%d" $system_reset_overlay`
- system_reset_kernel=0x`${CROSS}nm "$ofile".elf \
+ system_reset_kernel=0x`${CROSS}nm "$ofile" \
| grep ' __system_reset_kernel$' \
| cut -d' ' -f1`
system_reset_kernel=`printf "%d" $system_reset_kernel`
@@ -282,23 +289,15 @@
rm -f "$object/otheros.bld"
- msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
- skip=$overlay_dest seek=$system_reset_kernel \
- count=$overlay_size bs=1 2>&1)
+ ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
- if [ $? -ne "0" ]; then
- echo $msg
- exit 1
- fi
+ dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
+ skip=$overlay_dest seek=$system_reset_kernel \
+ count=$overlay_size bs=1
- msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
- skip=$system_reset_overlay seek=$overlay_dest \
- count=$overlay_size bs=1 2>&1)
-
- if [ $? -ne "0" ]; then
- echo $msg
- exit 2
- fi
+ dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
+ skip=$system_reset_overlay seek=$overlay_dest \
+ count=$overlay_size bs=1
gzip --force -9 --stdout "$ofile.bin" > "$object/otheros.bld"
;;
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 1ccf3ed..78c968a 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:40:47 2007
+# Linux kernel version: 2.6.24-rc2
+# Tue Nov 6 23:23:50 2007
#
CONFIG_PPC64=y
@@ -10,6 +10,7 @@
#
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
+# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
@@ -18,8 +19,13 @@
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -65,7 +71,10 @@
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -86,7 +95,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -107,14 +115,15 @@
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
@@ -125,7 +134,6 @@
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
@@ -141,6 +149,7 @@
# PA Semi PWRficient options
#
CONFIG_PPC_PASEMI_IOMMU=y
+# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
CONFIG_ELECTRA_IDE=y
# CONFIG_PPC_CELLEB is not set
@@ -156,29 +165,52 @@
# CONFIG_U3_DART is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
+CONFIG_MPIC_BROKEN_REGREAD=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# CPU Frequency drivers
+#
+CONFIG_PPC_PASEMI_CPUFREQ=y
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# Kernel options
#
-CONFIG_HZ_100=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_IOMMU_VMERGE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
@@ -196,12 +228,13 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-# CONFIG_PPC_HAS_HASH_64K is not set
-# CONFIG_PPC_64K_PAGES is not set
+CONFIG_PPC_HAS_HASH_64K=y
+CONFIG_PPC_64K_PAGES=y
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -222,11 +255,8 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
@@ -240,6 +270,7 @@
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
+# CONFIG_ELECTRA_CF is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_KERNEL_START=0xc000000000000000
@@ -255,7 +286,7 @@
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
@@ -281,6 +312,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -306,10 +338,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -338,6 +366,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -361,6 +390,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -385,6 +415,7 @@
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -402,7 +433,15 @@
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
@@ -455,10 +494,42 @@
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
@@ -498,10 +569,11 @@
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-CONFIG_BLK_DEV_3W_XXXX_RAID=y
-CONFIG_SCSI_3W_9XXX=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -574,9 +646,10 @@
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
+CONFIG_PATA_PCMCIA=y
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
@@ -589,41 +662,13 @@
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-
-#
-# Controllers
-#
-CONFIG_IEEE1394_PCILYNX=y
-CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-# CONFIG_IEEE1394_VIDEO1394 is not set
-CONFIG_IEEE1394_SBP2=y
-# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
-# CONFIG_IEEE1394_ETH1394 is not set
-# CONFIG_IEEE1394_DV1394 is not set
-CONFIG_IEEE1394_RAWIO=y
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
@@ -633,6 +678,8 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
@@ -649,6 +696,7 @@
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
@@ -657,13 +705,16 @@
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
@@ -682,6 +733,7 @@
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -689,6 +741,7 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -697,12 +750,15 @@
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
CONFIG_PASEMI_MAC=y
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -749,7 +805,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
@@ -810,15 +865,12 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=4
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PASEMI=y
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
@@ -896,8 +948,6 @@
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -905,12 +955,12 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -946,6 +996,13 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -963,14 +1020,14 @@
#
# Graphics support
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+CONFIG_DRM_RADEON=y
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
@@ -979,6 +1036,7 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -1026,6 +1084,15 @@
# CONFIG_FB_PM3 is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -1178,6 +1245,7 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -1328,6 +1396,7 @@
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
@@ -1357,19 +1426,6 @@
#
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
# Userspace I/O
#
# CONFIG_UIO is not set
@@ -1388,7 +1444,6 @@
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -1436,7 +1491,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
@@ -1449,30 +1503,43 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
@@ -1501,10 +1568,6 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1545,10 +1608,6 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
@@ -1561,23 +1620,24 @@
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1586,7 +1646,7 @@
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
@@ -1601,9 +1661,12 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
@@ -1620,6 +1683,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
@@ -1628,34 +1692,38 @@
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
+CONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 05582af..3e90c83 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Aug 30 16:47:09 2007
+# Linux kernel version: 2.6.24-rc2
+# Tue Nov 6 23:43:56 2007
#
CONFIG_PPC64=y
@@ -11,6 +11,7 @@
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
+# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
@@ -19,8 +20,13 @@
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -72,8 +78,15 @@
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_CPUACCT is not set
CONFIG_CPUSETS=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
@@ -93,7 +106,6 @@
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -114,6 +126,7 @@
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
@@ -132,7 +145,6 @@
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
@@ -155,7 +167,15 @@
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC64=y
CONFIG_PPC_MAPLE=y
-# CONFIG_PPC_PASEMI is not set
+CONFIG_PPC_PASEMI=y
+
+#
+# PA Semi PWRficient options
+#
+CONFIG_PPC_PASEMI_IOMMU=y
+# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
+CONFIG_PPC_PASEMI_MDIO=y
+CONFIG_ELECTRA_IDE=y
CONFIG_PPC_CELLEB=y
# CONFIG_PPC_PS3 is not set
CONFIG_PPC_CELL=y
@@ -188,6 +208,7 @@
CONFIG_PPC_PMI=m
CONFIG_MMIO_NVRAM=y
CONFIG_MPIC_U3_HT_IRQS=y
+CONFIG_MPIC_BROKEN_REGREAD=y
CONFIG_IBMVIO=y
# CONFIG_IBMEBUS is not set
# CONFIG_PPC_MPC106 is not set
@@ -201,6 +222,8 @@
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -211,6 +234,7 @@
# CPU Frequency drivers
#
CONFIG_CPU_FREQ_PMAC64=y
+CONFIG_PPC_PASEMI_CPUFREQ=y
# CONFIG_CPM2 is not set
CONFIG_AXON_RAM=m
# CONFIG_FSL_ULI1575 is not set
@@ -254,6 +278,8 @@
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
@@ -268,6 +294,7 @@
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SUSPEND_SMP_POSSIBLE=y
+CONFIG_HIBERNATION_SMP_POSSIBLE=y
CONFIG_SECCOMP=y
# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
@@ -284,12 +311,22 @@
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
#
-# PCCARD (PCMCIA/CardBus) support
+# PC-card bridges
#
-# CONFIG_PCCARD is not set
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_ELECTRA_CF=y
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
@@ -319,7 +356,10 @@
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
@@ -333,6 +373,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -404,6 +445,7 @@
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
@@ -465,10 +507,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -498,6 +536,7 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -539,6 +578,8 @@
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -550,6 +591,11 @@
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
@@ -557,8 +603,6 @@
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
@@ -590,7 +634,7 @@
CONFIG_BLK_DEV_IDEDMA_PMAC=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
@@ -631,6 +675,7 @@
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
@@ -671,19 +716,20 @@
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SVW=y
# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
+CONFIG_SATA_MV=y
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_SIL24=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -713,8 +759,10 @@
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+CONFIG_PATA_PCMCIA=y
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
@@ -725,6 +773,7 @@
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=y
+CONFIG_PATA_PLATFORM=y
CONFIG_PATA_SCC=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
@@ -745,15 +794,10 @@
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
# CONFIG_DM_MULTIPATH_RDAC is not set
+# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -800,13 +844,15 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=m
+CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
@@ -818,6 +864,9 @@
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
+# CONFIG_FIXED_MII_1000_FDX is not set
+CONFIG_FIXED_MII_AMNT=1
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
@@ -829,6 +878,11 @@
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_IBMVETH=m
+# CONFIG_IBM_NEW_EMAC is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_PCNET32_NAPI is not set
@@ -836,7 +890,6 @@
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
@@ -856,6 +909,7 @@
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -863,6 +917,7 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -872,13 +927,16 @@
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
-CONFIG_PASEMI_MAC=m
+# CONFIG_NIU is not set
+CONFIG_PASEMI_MAC=y
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -899,6 +957,7 @@
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
CONFIG_ISERIES_VETH=m
# CONFIG_FDDI is not set
@@ -918,6 +977,7 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
@@ -939,7 +999,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
@@ -1002,6 +1061,7 @@
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1029,14 +1089,18 @@
CONFIG_HVC_BEAT=y
CONFIG_HVCS=m
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
@@ -1068,6 +1132,7 @@
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_PASEMI=y
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
@@ -1106,6 +1171,13 @@
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -1122,18 +1194,8 @@
#
# Graphics support
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
@@ -1142,6 +1204,7 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -1192,6 +1255,19 @@
# CONFIG_FB_PM3 is not set
CONFIG_FB_IBM_GXT4500=y
# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
#
# Console display driver support
@@ -1333,6 +1409,12 @@
# CONFIG_SND_USB_CAIAQ is not set
#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
@@ -1348,6 +1430,7 @@
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -1489,19 +1572,53 @@
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_EDAC_PASEMI=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
#
#
@@ -1585,7 +1702,6 @@
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1604,10 +1720,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
@@ -1619,6 +1732,7 @@
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -1626,6 +1740,7 @@
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
@@ -1662,10 +1777,6 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -1706,10 +1817,6 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
# CONFIG_UCC_SLOW is not set
@@ -1733,18 +1840,17 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Instrumentation Support
-#
+CONFIG_INSTRUMENTATION=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1768,9 +1874,12 @@
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
@@ -1780,6 +1889,7 @@
# CONFIG_XMON_DEFAULT is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1788,6 +1898,7 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
@@ -1812,6 +1923,7 @@
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1826,9 +1938,12 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index d3fb7d0..9ed351f 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1104,6 +1104,16 @@
{
.pvr_mask = 0xf0000fff,
.pvr_value = 0x40000850,
+ .cpu_name = "440GR Rev. A",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .platform = "ppc440",
+ },
+ { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */
+ .pvr_mask = 0xf0000fff,
+ .pvr_value = 0x40000858,
.cpu_name = "440EP Rev. A",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
@@ -1115,6 +1125,16 @@
{
.pvr_mask = 0xf0000fff,
.pvr_value = 0x400008d3,
+ .cpu_name = "440GR Rev. B",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .platform = "ppc440",
+ },
+ { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */
+ .pvr_mask = 0xf0000fff,
+ .pvr_value = 0x400008db,
.cpu_name = "440EP Rev. B",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
@@ -1123,20 +1143,9 @@
.cpu_setup = __setup_cpu_440ep,
.platform = "ppc440",
},
- { /* 440EPX */
- .pvr_mask = 0xf0000ffb,
- .pvr_value = 0x200008D0,
- .cpu_name = "440EPX",
- .cpu_features = CPU_FTRS_44X,
- .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
- .icache_bsize = 32,
- .dcache_bsize = 32,
- .cpu_setup = __setup_cpu_440epx,
- .platform = "ppc440",
- },
{ /* 440GRX */
.pvr_mask = 0xf0000ffb,
- .pvr_value = 0x200008D8,
+ .pvr_value = 0x200008D0,
.cpu_name = "440GRX",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
@@ -1145,6 +1154,17 @@
.cpu_setup = __setup_cpu_440grx,
.platform = "ppc440",
},
+ { /* Use logical PVR for 440EPx (logical pvr = pvr | 0x8) */
+ .pvr_mask = 0xf0000ffb,
+ .pvr_value = 0x200008D8,
+ .cpu_name = "440EPX",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_440epx,
+ .platform = "ppc440",
+ },
{ /* 440GP Rev. B */
.pvr_mask = 0xf0000fff,
.pvr_value = 0x40000440,
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 21d889e..a7572cf 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -244,6 +244,13 @@
andis. r10,r0,DBCR0_IC@h
bnel- load_dbcr0
#endif
+#ifdef CONFIG_44x
+ lis r4,icache_44x_need_flush@ha
+ lwz r5,icache_44x_need_flush@l(r4)
+ cmplwi cr0,r5,0
+ bne- 2f
+1:
+#endif /* CONFIG_44x */
stwcx. r0,0,r1 /* to clear the reservation */
lwz r4,_LINK(r1)
lwz r5,_CCR(r1)
@@ -258,6 +265,12 @@
mtspr SPRN_SRR1,r8
SYNC
RFI
+#ifdef CONFIG_44x
+2: li r7,0
+ iccci r0,r0
+ stw r7,icache_44x_need_flush@l(r4)
+ b 1b
+#endif /* CONFIG_44x */
66: li r3,-ENOSYS
b ret_from_syscall
@@ -683,6 +696,16 @@
/* interrupts are hard-disabled at this point */
restore:
+#ifdef CONFIG_44x
+ lis r4,icache_44x_need_flush@ha
+ lwz r5,icache_44x_need_flush@l(r4)
+ cmplwi cr0,r5,0
+ beq+ 1f
+ li r6,0
+ iccci r0,r0
+ stw r6,icache_44x_need_flush@l(r4)
+1:
+#endif /* CONFIG_44x */
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 97c5857..c349868 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -904,7 +904,7 @@
*/
12: bl .save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
- lwz r4,_DAR(r1)
+ ld r4,_DAR(r1)
bl .low_hash_fault
b .ret_from_except
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index abd2957..c3cf0e8 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -122,7 +122,7 @@
{
.ctl_name = CTL_KERN,
.procname = "kernel",
- .mode = 0755,
+ .mode = 0555,
.child = powersave_nap_ctl_table,
},
{}
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 8533de5..8b642ab 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -288,7 +288,16 @@
*/
_GLOBAL(_tlbie)
#if defined(CONFIG_40x)
+ /* We run the search with interrupts disabled because we have to change
+ * the PID and I don't want to preempt when that happens.
+ */
+ mfmsr r5
+ mfspr r6,SPRN_PID
+ wrteei 0
+ mtspr SPRN_PID,r4
tlbsx. r3, 0, r3
+ mtspr SPRN_PID,r6
+ wrtee r5
bne 10f
sync
/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
@@ -297,23 +306,23 @@
tlbwe r3, r3, TLB_TAG
isync
10:
+
#elif defined(CONFIG_44x)
- mfspr r4,SPRN_MMUCR
- mfspr r5,SPRN_PID /* Get PID */
- rlwimi r4,r5,0,24,31 /* Set TID */
+ mfspr r5,SPRN_MMUCR
+ rlwimi r5,r4,0,24,31 /* Set TID */
/* We have to run the search with interrupts disabled, even critical
* and debug interrupts (in fact the only critical exceptions we have
* are debug and machine check). Otherwise an interrupt which causes
* a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
- mfmsr r5
+ mfmsr r4
lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
- andc r6,r5,r6
+ andc r6,r4,r6
mtmsr r6
- mtspr SPRN_MMUCR,r4
+ mtspr SPRN_MMUCR,r5
tlbsx. r3, 0, r3
- mtmsr r5
+ mtmsr r4
bne 10f
sync
/* There are only 64 TLB entries, so r3 < 64,
@@ -534,12 +543,21 @@
addi r3,r3,L1_CACHE_BYTES
bdnz 0b
sync
+#ifndef CONFIG_44x
+ /* We don't flush the icache on 44x. Those have a virtual icache
+ * and we don't have access to the virtual address here (it's
+ * not the page vaddr but where it's mapped in user space). The
+ * flushing of the icache on these is handled elsewhere, when
+ * a change in the address space occurs, before returning to
+ * user space
+ */
mtctr r4
1: icbi 0,r6
addi r6,r6,L1_CACHE_BYTES
bdnz 1b
sync
isync
+#endif /* CONFIG_44x */
blr
/*
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 9f329a8..acc0d24 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -697,6 +697,18 @@
prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
if (prop && (*prop & 0xff000000) == 0x0f000000)
identify_cpu(0, *prop);
+#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
+ /*
+ * Since 440GR(x)/440EP(x) processors have the same pvr,
+ * we check the node path and set bit 28 in the cur_cpu_spec
+ * pvr for EP(x) processor version. This bit is always 0 in
+ * the "real" pvr. Then we call identify_cpu again with
+ * the new logical pvr to enable FPU support.
+ */
+ if (strstr(uname, "440EP")) {
+ identify_cpu(0, cur_cpu_spec->pvr_value | 0x8);
+ }
+#endif
}
check_cpu_feature_properties(node);
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 1db10f7..1add6ef 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1244,7 +1244,7 @@
local_alloc_bottom = base;
/* It seems OF doesn't null-terminate the path :-( */
- memset(path, 0, sizeof(path));
+ memset(path, 0, PROM_SCRATCH_SIZE);
/* Call OF to setup the TCE hardware */
if (call_prom("package-to-path", 3, 1, node,
path, PROM_SCRATCH_SIZE-1) == PROM_ERROR) {
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index ede77db..3b1529c 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -291,23 +291,16 @@
if ( num_cpus == 1 ) {
const u32 *sizep, *lsizep;
u32 size, lsize;
- const char *dc, *ic;
-
- /* Then read cache informations */
- if (machine_is(powermac)) {
- dc = "d-cache-block-size";
- ic = "i-cache-block-size";
- } else {
- dc = "d-cache-line-size";
- ic = "i-cache-line-size";
- }
size = 0;
lsize = cur_cpu_spec->dcache_bsize;
sizep = of_get_property(np, "d-cache-size", NULL);
if (sizep != NULL)
size = *sizep;
- lsizep = of_get_property(np, dc, NULL);
+ lsizep = of_get_property(np, "d-cache-block-size", NULL);
+ /* fallback if block size missing */
+ if (lsizep == NULL)
+ lsizep = of_get_property(np, "d-cache-line-size", NULL);
if (lsizep != NULL)
lsize = *lsizep;
if (sizep == 0 || lsizep == 0)
@@ -324,7 +317,9 @@
sizep = of_get_property(np, "i-cache-size", NULL);
if (sizep != NULL)
size = *sizep;
- lsizep = of_get_property(np, ic, NULL);
+ lsizep = of_get_property(np, "i-cache-block-size", NULL);
+ if (lsizep == NULL)
+ lsizep = of_get_property(np, "i-cache-line-size", NULL);
if (lsizep != NULL)
lsize = *lsizep;
if (sizep == 0 || lsizep == 0)
diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S
index 69e8f86..77fc766 100644
--- a/arch/powerpc/kernel/swsusp_32.S
+++ b/arch/powerpc/kernel/swsusp_32.S
@@ -133,10 +133,12 @@
/* Resume code */
_GLOBAL(swsusp_arch_resume)
+#ifdef CONFIG_ALTIVEC
/* Stop pending alitvec streams and memory accesses */
BEGIN_FTR_SECTION
DSSALL
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif
sync
/* Disable MSR:DR to make sure we don't take a TLB or
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 9eb3284..99ebcd3 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -586,7 +586,7 @@
/* not time for this event yet */
now = per_cpu(decrementer_next_tb, cpu) - now;
if (now <= DECREMENTER_MAX)
- set_dec((unsigned int)now - 1);
+ set_dec((int)now);
return;
}
old_regs = set_irq_regs(regs);
@@ -611,8 +611,6 @@
if (evt->event_handler)
evt->event_handler(evt);
- else
- evt->set_next_event(DECREMENTER_MAX, evt);
#ifdef CONFIG_PPC_ISERIES
if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending())
@@ -836,9 +834,6 @@
struct clock_event_device *dev)
{
__get_cpu_var(decrementer_next_tb) = get_tb_or_rtc() + evt;
- /* The decrementer interrupts on the 0 -> -1 transition */
- if (evt)
- --evt;
set_dec(evt);
return 0;
}
@@ -871,7 +866,8 @@
decrementer_clockevent.shift);
decrementer_clockevent.max_delta_ns =
clockevent_delta2ns(DECREMENTER_MAX, &decrementer_clockevent);
- decrementer_clockevent.min_delta_ns = 1000;
+ decrementer_clockevent.min_delta_ns =
+ clockevent_delta2ns(2, &decrementer_clockevent);
register_decrementer_clockevent(cpu);
}
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 823a8cb..f66fa5d 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -37,11 +37,10 @@
ALIGN_FUNCTION();
*(.text.head)
_text = .;
- TEXT_TEXT
+ *(.text .fixup .text.init.refok .exit.text.refok)
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
- *(.fixup)
#ifdef CONFIG_PPC32
*(.got1)
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index e067df8..3899ea9 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -98,13 +98,12 @@
v = KERNELBASE;
p = PPC_MEMSTART;
- s = 0;
+ s = total_lowmem;
- if (__map_without_ltlbs) {
- return s;
- }
+ if (__map_without_ltlbs)
+ return 0;
- while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+ while (s >= LARGE_PAGE_SIZE_16M) {
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
@@ -116,10 +115,10 @@
v += LARGE_PAGE_SIZE_16M;
p += LARGE_PAGE_SIZE_16M;
- s += LARGE_PAGE_SIZE_16M;
+ s -= LARGE_PAGE_SIZE_16M;
}
- while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+ while (s >= LARGE_PAGE_SIZE_4M) {
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
@@ -128,8 +127,8 @@
v += LARGE_PAGE_SIZE_4M;
p += LARGE_PAGE_SIZE_4M;
- s += LARGE_PAGE_SIZE_4M;
+ s -= LARGE_PAGE_SIZE_4M;
}
- return s;
+ return total_lowmem - s;
}
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index c3df504..04dc087 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -35,6 +35,7 @@
*/
unsigned int tlb_44x_index; /* = 0 */
unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
+int icache_44x_need_flush;
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index a18fda3..8135da0 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -309,7 +309,7 @@
set_bit(PG_arch_1, &page->flags);
}
pte_update(ptep, 0, _PAGE_HWEXEC);
- _tlbie(address);
+ _tlbie(address, mm->context.id);
pte_unmap_unlock(ptep, ptl);
up_read(&mm->mmap_sem);
return 0;
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index ad253b9..e935edd 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -331,7 +331,7 @@
*****************************************************************************/
/* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
- * pte_t *ptep, unsigned long trap, int local)
+ * pte_t *ptep, unsigned long trap, int local, int ssize)
*/
/*
@@ -557,7 +557,8 @@
mr r4,r31 /* PTE.pte */
li r5,0 /* PTE.hidx */
li r6,MMU_PAGE_64K /* psize */
- ld r7,STK_PARM(r8)(r1) /* local */
+ ld r7,STK_PARM(r9)(r1) /* ssize */
+ ld r8,STK_PARM(r8)(r1) /* local */
bl .flush_hash_page
b htab_insert_pte
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index c78dc91..f09730b 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -51,6 +51,7 @@
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/spu.h>
+#include <asm/udbg.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
@@ -791,8 +792,7 @@
}
if (user_region) {
if (psize != get_paca()->context.user_psize) {
- get_paca()->context.user_psize =
- mm->context.user_psize;
+ get_paca()->context = mm->context;
slb_flush_and_rebolt();
}
} else if (get_paca()->vmalloc_sllp !=
@@ -885,6 +885,9 @@
local_irq_restore(flags);
}
+/* WARNING: This is called from hash_low_64.S, if you change this prototype,
+ * do not forget to update the assembly call site !
+ */
void flush_hash_page(unsigned long va, real_pte_t pte, int psize, int ssize,
int local)
{
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index c94a64f..eb3a732 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -61,12 +61,12 @@
#define mmu_mapin_ram() (0UL)
#elif defined(CONFIG_4xx)
-#define flush_HPTE(X, va, pg) _tlbie(va)
+#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
#elif defined(CONFIG_FSL_BOOKE)
-#define flush_HPTE(X, va, pg) _tlbie(va)
+#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
extern void adjust_total_lowmem(void);
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index bbd2c51..27922df 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -25,6 +25,7 @@
#include <asm/smp.h>
#include <asm/firmware.h>
#include <linux/compiler.h>
+#include <asm/udbg.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
@@ -148,6 +149,35 @@
slb_flush_and_rebolt();
}
+/* Helper function to compare esids. There are four cases to handle.
+ * 1. The system is not 1T segment size capable. Use the GET_ESID compare.
+ * 2. The system is 1T capable, both addresses are < 1T, use the GET_ESID compare.
+ * 3. The system is 1T capable, only one of the two addresses is > 1T. This is not a match.
+ * 4. The system is 1T capable, both addresses are > 1T, use the GET_ESID_1T macro to compare.
+ */
+static inline int esids_match(unsigned long addr1, unsigned long addr2)
+{
+ int esid_1t_count;
+
+ /* System is not 1T segment size capable. */
+ if (!cpu_has_feature(CPU_FTR_1T_SEGMENT))
+ return (GET_ESID(addr1) == GET_ESID(addr2));
+
+ esid_1t_count = (((addr1 >> SID_SHIFT_1T) != 0) +
+ ((addr2 >> SID_SHIFT_1T) != 0));
+
+ /* both addresses are < 1T */
+ if (esid_1t_count == 0)
+ return (GET_ESID(addr1) == GET_ESID(addr2));
+
+ /* One address < 1T, the other > 1T. Not a match */
+ if (esid_1t_count == 1)
+ return 0;
+
+ /* Both addresses are > 1T. */
+ return (GET_ESID_1T(addr1) == GET_ESID_1T(addr2));
+}
+
/* Flush all user entries from the segment table of the current processor. */
void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
{
@@ -193,15 +223,14 @@
return;
slb_allocate(pc);
- if (GET_ESID(pc) == GET_ESID(stack))
+ if (esids_match(pc,stack))
return;
if (is_kernel_addr(stack))
return;
slb_allocate(stack);
- if ((GET_ESID(pc) == GET_ESID(unmapped_base))
- || (GET_ESID(stack) == GET_ESID(unmapped_base)))
+ if (esids_match(pc,unmapped_base) || esids_match(stack,unmapped_base))
return;
if (is_kernel_addr(unmapped_base))
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 151fd8b..04f74f9 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -158,6 +158,18 @@
return virq;
}
+void iic_setup_cpu(void)
+{
+ out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
+}
+
+u8 iic_get_target_id(int cpu)
+{
+ return per_cpu(iic, cpu).target_id;
+}
+
+EXPORT_SYMBOL_GPL(iic_get_target_id);
+
#ifdef CONFIG_SMP
/* Use the highest interrupt priorities for IPI */
@@ -166,29 +178,17 @@
return IIC_IRQ_TYPE_IPI + 0xf - ipi;
}
-void iic_setup_cpu(void)
-{
- out_be64(&__get_cpu_var(iic).regs->prio, 0xff);
-}
-
void iic_cause_IPI(int cpu, int mesg)
{
out_be64(&per_cpu(iic, cpu).regs->generate, (0xf - mesg) << 4);
}
-u8 iic_get_target_id(int cpu)
-{
- return per_cpu(iic, cpu).target_id;
-}
-EXPORT_SYMBOL_GPL(iic_get_target_id);
-
struct irq_host *iic_get_irq_host(int node)
{
return iic_host;
}
EXPORT_SYMBOL_GPL(iic_get_irq_host);
-
static irqreturn_t iic_ipi_action(int irq, void *dev_id)
{
int ipi = (int)(long)dev_id;
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 1c0acba..e443845 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -44,6 +44,7 @@
#include <asm/rtas.h>
#include "interrupt.h"
+#include <asm/udbg.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c
index 1769d75..ddfb35a 100644
--- a/arch/powerpc/platforms/celleb/setup.c
+++ b/arch/powerpc/platforms/celleb/setup.c
@@ -49,6 +49,7 @@
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/irq.h>
+#include <asm/time.h>
#include <asm/spu_priv1.h>
#include <asm/firmware.h>
#include <asm/of_platform.h>
diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h
index 69f1b43..a1c2360 100644
--- a/arch/powerpc/platforms/iseries/irq.h
+++ b/arch/powerpc/platforms/iseries/irq.h
@@ -1,9 +1,13 @@
#ifndef _ISERIES_IRQ_H
#define _ISERIES_IRQ_H
+#ifdef CONFIG_PCI
extern void iSeries_init_IRQ(void);
extern int iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, u32);
extern void iSeries_activate_IRQs(void);
+#else
+#define iSeries_init_IRQ NULL
+#endif
extern unsigned int iSeries_get_irq(void);
#endif /* _ISERIES_IRQ_H */
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 37ae07e..0877a88 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -617,10 +617,6 @@
}
}
-#ifndef CONFIG_PCI
-void __init iSeries_init_IRQ(void) { }
-#endif
-
static void __iomem *iseries_ioremap(phys_addr_t address, unsigned long size,
unsigned long flags)
{
diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c
index d6435b0..be06cfd 100644
--- a/arch/powerpc/platforms/iseries/vio.c
+++ b/arch/powerpc/platforms/iseries/vio.c
@@ -523,15 +523,16 @@
static int __init iseries_vio_init(void)
{
struct device_node *vio_root;
+ int ret = -ENODEV;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
- return -ENODEV;
+ goto out;
iommu_vio_init();
vio_root = of_find_node_by_path("/vdevice");
if (!vio_root)
- return -ENODEV;
+ goto out;
if (viopath_hostLp == HvLpIndexInvalid) {
vio_set_hostlp();
@@ -544,10 +545,11 @@
get_viocd_info(vio_root);
get_viotape_info(vio_root);
- return 0;
+ ret = 0;
put_node:
of_node_put(vio_root);
- return -ENODEV;
+ out:
+ return ret;
}
arch_initcall(iseries_vio_init);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 22322b3..fb3d636 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -186,6 +186,11 @@
n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg);
+ if (!dev) {
+ printk(KERN_WARNING "EEH: no PCI device for this of node\n");
+ return n;
+ }
+
/* Gather bridge-specific registers */
if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
rtas_read_config(pdn, PCI_SEC_STATUS, 2, &cfg);
@@ -198,7 +203,7 @@
}
/* Dump out the PCI-X command and status regs */
- cap = pci_find_capability(pdn->pcidev, PCI_CAP_ID_PCIX);
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (cap) {
rtas_read_config(pdn, cap, 4, &cfg);
n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
@@ -210,7 +215,7 @@
}
/* If PCI-E capable, dump PCI-E cap 10, and the AER */
- cap = pci_find_capability(pdn->pcidev, PCI_CAP_ID_EXP);
+ cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (cap) {
n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
printk(KERN_WARNING
@@ -222,7 +227,7 @@
printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
}
- cap = pci_find_ext_capability(pdn->pcidev, PCI_EXT_CAP_ID_ERR);
+ cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
if (cap) {
n += scnprintf(buf+n, len-n, "pci-e AER:\n");
printk(KERN_WARNING
@@ -318,7 +323,7 @@
if (rets[2] == 0) return -1; /* permanently unavailable */
- if (max_wait_msecs <= 0) return -1;
+ if (max_wait_msecs <= 0) break;
mwait = rets[2];
if (mwait <= 0) {
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index 15e015e..57e025e 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -105,17 +105,18 @@
return;
rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen);
+
+ /* A driver that needs a reset trumps all others */
+ if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
if (*res == PCI_ERS_RESULT_NONE) *res = rc;
- if (*res == PCI_ERS_RESULT_DISCONNECT &&
- rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
}
/**
* eeh_report_mmio_enabled - tell drivers that MMIO has been enabled
*
- * Report an EEH error to each device driver, collect up and
- * merge the device driver responses. Cumulative response
- * passed back in "userdata".
+ * Tells each device driver that IO ports, MMIO and config space I/O
+ * are now enabled. Collects up and merges the device driver responses.
+ * Cumulative response passed back in "userdata".
*/
static void eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata)
@@ -123,17 +124,16 @@
enum pci_ers_result rc, *res = userdata;
struct pci_driver *driver = dev->driver;
- // dev->error_state = pci_channel_mmio_enabled;
-
if (!driver ||
!driver->err_handler ||
!driver->err_handler->mmio_enabled)
return;
rc = driver->err_handler->mmio_enabled (dev);
+
+ /* A driver that needs a reset trumps all others */
+ if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
if (*res == PCI_ERS_RESULT_NONE) *res = rc;
- if (*res == PCI_ERS_RESULT_DISCONNECT &&
- rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
}
/**
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 8b18a1c..b765b7c 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -25,6 +25,7 @@
#include <asm/firmware.h>
#include <asm/prom.h>
+#include <asm/udbg.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 2793a1b..f15222b 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -171,6 +171,7 @@
struct pci_dn *pdn;
int hwirq, virq, i, rc;
struct msi_desc *entry;
+ struct msi_msg msg;
pdn = get_pdn(pdev);
if (!pdn)
@@ -213,6 +214,11 @@
dev_dbg(&pdev->dev, "rtas_msi: allocated virq %d\n", virq);
set_irq_msi(virq, entry);
+
+ /* Read config space back so we can restore after reset */
+ read_msi_msg(virq, &msg);
+ entry->msg = msg;
+
unmask_msi_irq(virq);
}
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 7c1b27a..216c0f5 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -137,6 +137,7 @@
static struct irq_chip i8259_pic = {
.typename = " i8259 ",
.mask = i8259_mask_irq,
+ .disable = i8259_mask_irq,
.unmask = i8259_unmask_irq,
.mask_ack = i8259_mask_and_ack_irq,
};
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index 9b3baa7..6933f9c 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -24,8 +24,9 @@
#define MV64X60_VAL_LEN_MAX 11
#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68
-static ssize_t mv64x60_hs_reg_read(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+static ssize_t mv64x60_hs_reg_read(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count)
{
struct pci_dev *phb;
u32 v;
@@ -44,8 +45,9 @@
return sprintf(buf, "0x%08x\n", v);
}
-static ssize_t mv64x60_hs_reg_write(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+static ssize_t mv64x60_hs_reg_write(struct kobject *kobj,
+ struct bin_attribute *attr, char *buf,
+ loff_t off, size_t count)
{
struct pci_dev *phb;
u32 v;
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index fba7ca1..b19bfef 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -244,6 +244,13 @@
andis. r10,r0,DBCR0_IC@h
bnel- load_dbcr0
#endif
+#ifdef CONFIG_44x
+ lis r4,icache_44x_need_flush@ha
+ lwz r5,icache_44x_need_flush@l(r4)
+ cmplwi cr0,r5,0
+ bne- 2f
+1:
+#endif /* CONFIG_44x */
stwcx. r0,0,r1 /* to clear the reservation */
lwz r4,_LINK(r1)
lwz r5,_CCR(r1)
@@ -258,6 +265,12 @@
mtspr SPRN_SRR1,r8
SYNC
RFI
+#ifdef CONFIG_44x
+2: li r7,0
+ iccci r0,r0
+ stw r7,icache_44x_need_flush@l(r4)
+ b 1b
+#endif /* CONFIG_44x */
66: li r3,-ENOSYS
b ret_from_syscall
@@ -679,6 +692,16 @@
/* interrupts are hard-disabled at this point */
restore:
+#ifdef CONFIG_44x
+ lis r4,icache_44x_need_flush@ha
+ lwz r5,icache_44x_need_flush@l(r4)
+ cmplwi cr0,r5,0
+ beq+ 1f
+ li r6,0
+ iccci r0,r0
+ stw r6,icache_44x_need_flush@l(r4)
+1:
+#endif /* CONFIG_44x */
lwz r0,GPR0(r1)
lwz r2,GPR2(r1)
REST_4GPRS(3, r1)
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index a22e1f4..e0c850d 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -224,7 +224,16 @@
*/
_GLOBAL(_tlbie)
#if defined(CONFIG_40x)
+ /* We run the search with interrupts disabled because we have to change
+ * the PID and I don't want to preempt when that happens.
+ */
+ mfmsr r5
+ mfspr r6,SPRN_PID
+ wrteei 0
+ mtspr SPRN_PID,r4
tlbsx. r3, 0, r3
+ mtspr SPRN_PID,r6
+ wrtee r5
bne 10f
sync
/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
@@ -234,22 +243,21 @@
isync
10:
#elif defined(CONFIG_44x)
- mfspr r4,SPRN_MMUCR
- mfspr r5,SPRN_PID /* Get PID */
- rlwimi r4,r5,0,24,31 /* Set TID */
+ mfspr r5,SPRN_MMUCR
+ rlwimi r5,r4,0,24,31 /* Set TID */
/* We have to run the search with interrupts disabled, even critical
* and debug interrupts (in fact the only critical exceptions we have
* are debug and machine check). Otherwise an interrupt which causes
* a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
- mfmsr r5
+ mfmsr r4
lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
- andc r6,r5,r6
+ andc r6,r4,r6
mtmsr r6
- mtspr SPRN_MMUCR,r4
+ mtspr SPRN_MMUCR,r5
tlbsx. r3, 0, r3
- mtmsr r5
+ mtmsr r4
bne 10f
sync
/* There are only 64 TLB entries, so r3 < 64,
@@ -491,12 +499,21 @@
addi r3,r3,L1_CACHE_BYTES
bdnz 0b
sync
+#ifndef CONFIG_44x
+ /* We don't flush the icache on 44x. Those have a virtual icache
+ * and we don't have access to the virtual address here (it's
+ * not the page vaddr but where it's mapped in user space). The
+ * flushing of the icache on these is handled elsewhere, when
+ * a change in the address space occurs, before returning to
+ * user space
+ */
mtctr r4
1: icbi 0,r6
addi r6,r6,L1_CACHE_BYTES
bdnz 1b
sync
isync
+#endif /* CONFIG_44x */
blr
/*
diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c
index 0a0a0487b..6536a25 100644
--- a/arch/ppc/mm/44x_mmu.c
+++ b/arch/ppc/mm/44x_mmu.c
@@ -61,6 +61,7 @@
*/
unsigned int tlb_44x_index = 0;
unsigned int tlb_44x_hwater = 62;
+int icache_44x_need_flush;
/*
* "Pins" a 256MB TLB entry in AS0 for kernel lowmem
diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c
index 838e09d..ea785db 100644
--- a/arch/ppc/mm/4xx_mmu.c
+++ b/arch/ppc/mm/4xx_mmu.c
@@ -99,13 +99,12 @@
v = KERNELBASE;
p = PPC_MEMSTART;
- s = 0;
+ s = total_lowmem;
- if (__map_without_ltlbs) {
- return s;
- }
+ if (__map_without_ltlbs)
+ return 0;
- while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+ while (s >= LARGE_PAGE_SIZE_16M) {
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
@@ -117,10 +116,10 @@
v += LARGE_PAGE_SIZE_16M;
p += LARGE_PAGE_SIZE_16M;
- s += LARGE_PAGE_SIZE_16M;
+ s -= LARGE_PAGE_SIZE_16M;
}
- while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+ while (s >= LARGE_PAGE_SIZE_4M) {
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
@@ -129,8 +128,8 @@
v += LARGE_PAGE_SIZE_4M;
p += LARGE_PAGE_SIZE_4M;
- s += LARGE_PAGE_SIZE_4M;
+ s -= LARGE_PAGE_SIZE_4M;
}
- return s;
+ return total_lowmem - s;
}
diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c
index 254c23b..36c0e75 100644
--- a/arch/ppc/mm/fault.c
+++ b/arch/ppc/mm/fault.c
@@ -227,7 +227,7 @@
set_bit(PG_arch_1, &page->flags);
}
pte_update(ptep, 0, _PAGE_HWEXEC);
- _tlbie(address);
+ _tlbie(address, mm->context.id);
pte_unmap_unlock(ptep, ptl);
up_read(&mm->mmap_sem);
return 0;
diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h
index 540f329..f1d4f21 100644
--- a/arch/ppc/mm/mmu_decl.h
+++ b/arch/ppc/mm/mmu_decl.h
@@ -54,12 +54,12 @@
#define mmu_mapin_ram() (0UL)
#elif defined(CONFIG_4xx)
-#define flush_HPTE(X, va, pg) _tlbie(va)
+#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
#elif defined(CONFIG_FSL_BOOKE)
-#define flush_HPTE(X, va, pg) _tlbie(va)
+#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
extern void adjust_total_lowmem(void);
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
index 05d7184..453643a 100644
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -236,7 +236,7 @@
gen550_init(0, &port);
/* Purge TLB entry added in head_44x.S for early serial access */
- _tlbie(UART0_IO_BASE);
+ _tlbie(UART0_IO_BASE, 0);
#endif
port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
index 4b16961..b79ebb8 100644
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -230,10 +230,15 @@
/* Allocate hoses for PCIX1 and PCIX2 */
hose1 = pcibios_alloc_controller();
- hose2 = pcibios_alloc_controller();
- if (!hose1 || !hose2)
+ if (!hose1)
return;
+ hose2 = pcibios_alloc_controller();
+ if (!hose2) {
+ pcibios_free_controller(hose1);
+ return;
+ }
+
/* Setup PCIX1 */
hose1->first_busno = 0;
hose1->last_busno = 0xff;
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index fd0f971..28a712c 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -259,7 +259,7 @@
gen550_init(0, &port);
/* Purge TLB entry added in head_44x.S for early serial access */
- _tlbie(UART0_IO_BASE);
+ _tlbie(UART0_IO_BASE, 0);
#endif
port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
index 888c492..f6a0c66 100644
--- a/arch/ppc/platforms/4xx/taishan.c
+++ b/arch/ppc/platforms/4xx/taishan.c
@@ -316,7 +316,7 @@
gen550_init(0, &port);
/* Purge TLB entry added in head_44x.S for early serial access */
- _tlbie(UART0_IO_BASE);
+ _tlbie(UART0_IO_BASE, 0);
#endif
port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c
index 1e5a00a4..559f27c 100644
--- a/arch/ppc/syslib/i8259.c
+++ b/arch/ppc/syslib/i8259.c
@@ -127,6 +127,7 @@
static struct irq_chip i8259_pic = {
.typename = " i8259 ",
.mask = i8259_mask_irq,
+ .disable = i8259_mask_irq,
.unmask = i8259_unmask_irq,
.mask_ack = i8259_mask_and_ack_irq,
};
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
index 15f0d73..46588fa 100644
--- a/arch/ppc/syslib/m8260_setup.c
+++ b/arch/ppc/syslib/m8260_setup.c
@@ -25,6 +25,7 @@
#include <asm/machdep.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
+#include <asm/ppc_sys.h>
#include "cpm2_pic.h"
@@ -61,7 +62,7 @@
#endif
identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME,
- in_be32(CPM_MAP_ADDR + CPM_IMMR_OFFSET));
+ in_be32((void *)CPM_MAP_ADDR + CPM_IMMR_OFFSET));
m82xx_board_setup();
}
@@ -147,12 +148,12 @@
seq_printf(m, "vendor\t\t: %s\n"
"machine\t\t: %s\n"
"\n"
- "mem size\t\t: 0x%08x\n"
- "console baud\t\t: %d\n"
+ "mem size\t\t: 0x%08lx\n"
+ "console baud\t\t: %ld\n"
"\n"
- "core clock\t: %u MHz\n"
- "CPM clock\t: %u MHz\n"
- "bus clock\t: %u MHz\n",
+ "core clock\t: %lu MHz\n"
+ "CPM clock\t: %lu MHz\n"
+ "bus clock\t: %lu MHz\n",
CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize,
bp->bi_baudrate, bp->bi_intfreq / 1000000,
bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000);
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index e1e24f3..01a6756 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -18,7 +18,6 @@
#include <linux/linkage.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
-#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/random.h>
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index 9f472a7..eeb5a2f 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -6,7 +6,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/module.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/sched.h>
diff --git a/arch/sparc64/kernel/module.c b/arch/sparc64/kernel/module.c
index 5798715..158484b 100644
--- a/arch/sparc64/kernel/module.c
+++ b/arch/sparc64/kernel/module.c
@@ -11,7 +11,6 @@
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/slab.h>
-#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <asm/processor.h>
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 78caff9..98c4688 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -51,7 +51,6 @@
#include <linux/vfs.h>
#include <linux/netfilter_ipv4/ip_tables.h>
#include <linux/ptrace.h>
-#include <linux/highuid.h>
#include <asm/types.h>
#include <asm/uaccess.h>
diff --git a/arch/sparc64/kernel/sys_sunos32.c b/arch/sparc64/kernel/sys_sunos32.c
index 170d6ca..cfc22d3 100644
--- a/arch/sparc64/kernel/sys_sunos32.c
+++ b/arch/sparc64/kernel/sys_sunos32.c
@@ -57,7 +57,6 @@
#include <linux/personality.h>
/* For SOCKET_I */
-#include <linux/socket.h>
#include <net/sock.h>
#include <net/compat.h>
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index a2cf955..4352ee4 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -28,7 +28,6 @@
#include <linux/jiffies.h>
#include <linux/cpufreq.h>
#include <linux/percpu.h>
-#include <linux/profile.h>
#include <linux/miscdevice.h>
#include <linux/rtc.h>
#include <linux/kernel_stat.h>
@@ -47,7 +46,6 @@
#include <asm/sections.h>
#include <asm/cpudata.h>
#include <asm/uaccess.h>
-#include <asm/prom.h>
#include <asm/irq_regs.h>
DEFINE_SPINLOCK(mostek_lock);
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 7a00350..1bdd2bf 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -730,13 +730,23 @@
return 0;
}
-int n_tty_ioctl(struct tty_struct * tty, struct file * file,
- unsigned int cmd, unsigned long arg)
+/**
+ * tty_mode_ioctl - mode related ioctls
+ * @tty: tty for the ioctl
+ * @file: file pointer for the tty
+ * @cmd: command
+ * @arg: ioctl argument
+ *
+ * Perform non line discipline specific mode control ioctls. This
+ * is designed to be called by line disciplines to ensure they provide
+ * consistent mode setting.
+ */
+
+int tty_mode_ioctl(struct tty_struct * tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
{
struct tty_struct * real_tty;
void __user *p = (void __user *)arg;
- int retval;
- struct tty_ldisc *ld;
if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
tty->driver->subtype == PTY_TYPE_MASTER)
@@ -799,6 +809,93 @@
return set_termios(real_tty, p, TERMIOS_WAIT | TERMIOS_TERMIO);
case TCSETA:
return set_termios(real_tty, p, TERMIOS_TERMIO);
+#ifndef TCGETS2
+ case TIOCGLCKTRMIOS:
+ if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
+ return -EFAULT;
+ return 0;
+
+ case TIOCSLCKTRMIOS:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg))
+ return -EFAULT;
+ return 0;
+#else
+ case TIOCGLCKTRMIOS:
+ if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
+ return -EFAULT;
+ return 0;
+
+ case TIOCSLCKTRMIOS:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg))
+ return -EFAULT;
+ return 0;
+#endif
+ case TIOCGSOFTCAR:
+ return put_user(C_CLOCAL(tty) ? 1 : 0, (int __user *)arg);
+ case TIOCSSOFTCAR:
+ if (get_user(arg, (unsigned int __user *) arg))
+ return -EFAULT;
+ mutex_lock(&tty->termios_mutex);
+ tty->termios->c_cflag =
+ ((tty->termios->c_cflag & ~CLOCAL) |
+ (arg ? CLOCAL : 0));
+ mutex_unlock(&tty->termios_mutex);
+ return 0;
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+EXPORT_SYMBOL_GPL(tty_mode_ioctl);
+
+int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
+{
+ struct tty_ldisc *ld;
+ int retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+
+ ld = tty_ldisc_ref(tty);
+ switch (arg) {
+ case TCIFLUSH:
+ if (ld && ld->flush_buffer)
+ ld->flush_buffer(tty);
+ break;
+ case TCIOFLUSH:
+ if (ld && ld->flush_buffer)
+ ld->flush_buffer(tty);
+ /* fall through */
+ case TCOFLUSH:
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+ break;
+ default:
+ tty_ldisc_deref(ld);
+ return -EINVAL;
+ }
+ tty_ldisc_deref(ld);
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(tty_perform_flush);
+
+int n_tty_ioctl(struct tty_struct * tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct tty_struct * real_tty;
+ int retval;
+
+ if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+ tty->driver->subtype == PTY_TYPE_MASTER)
+ real_tty = tty->link;
+ else
+ real_tty = tty;
+
+ switch (cmd) {
case TCXONC:
retval = tty_check_change(tty);
if (retval)
@@ -829,30 +926,7 @@
}
return 0;
case TCFLSH:
- retval = tty_check_change(tty);
- if (retval)
- return retval;
-
- ld = tty_ldisc_ref(tty);
- switch (arg) {
- case TCIFLUSH:
- if (ld && ld->flush_buffer)
- ld->flush_buffer(tty);
- break;
- case TCIOFLUSH:
- if (ld && ld->flush_buffer)
- ld->flush_buffer(tty);
- /* fall through */
- case TCOFLUSH:
- if (tty->driver->flush_buffer)
- tty->driver->flush_buffer(tty);
- break;
- default:
- tty_ldisc_deref(ld);
- return -EINVAL;
- }
- tty_ldisc_deref(ld);
- return 0;
+ return tty_perform_flush(tty, arg);
case TIOCOUTQ:
return put_user(tty->driver->chars_in_buffer ?
tty->driver->chars_in_buffer(tty) : 0,
@@ -862,32 +936,6 @@
if (L_ICANON(tty))
retval = inq_canon(tty);
return put_user(retval, (unsigned int __user *) arg);
-#ifndef TCGETS2
- case TIOCGLCKTRMIOS:
- if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
- return -EFAULT;
- return 0;
-
- case TIOCSLCKTRMIOS:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg))
- return -EFAULT;
- return 0;
-#else
- case TIOCGLCKTRMIOS:
- if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked))
- return -EFAULT;
- return 0;
-
- case TIOCSLCKTRMIOS:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg))
- return -EFAULT;
- return 0;
-#endif
-
case TIOCPKT:
{
int pktmode;
@@ -906,19 +954,9 @@
tty->packet = 0;
return 0;
}
- case TIOCGSOFTCAR:
- return put_user(C_CLOCAL(tty) ? 1 : 0, (int __user *)arg);
- case TIOCSSOFTCAR:
- if (get_user(arg, (unsigned int __user *) arg))
- return -EFAULT;
- mutex_lock(&tty->termios_mutex);
- tty->termios->c_cflag =
- ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
- mutex_unlock(&tty->termios_mutex);
- return 0;
default:
- return -ENOIOCTLCMD;
+ /* Try the mode commands */
+ return tty_mode_ioctl(tty, file, cmd, arg);
}
}
diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c
index 5596df6..624ff3e 100644
--- a/drivers/firewire/fw-sbp2.c
+++ b/drivers/firewire/fw-sbp2.c
@@ -650,13 +650,14 @@
if (sbp2_send_management_orb(lu, node_id, generation,
SBP2_LOGIN_REQUEST, lu->lun, &response) < 0) {
if (lu->retries++ < 5) {
- queue_delayed_work(sbp2_wq, &lu->work,
- DIV_ROUND_UP(HZ, 5));
+ if (queue_delayed_work(sbp2_wq, &lu->work,
+ DIV_ROUND_UP(HZ, 5)))
+ kref_get(&lu->tgt->kref);
} else {
fw_error("failed to login to %s LUN %04x\n",
unit->device.bus_id, lu->lun);
- kref_put(&lu->tgt->kref, sbp2_release_target);
}
+ kref_put(&lu->tgt->kref, sbp2_release_target);
return;
}
@@ -914,7 +915,9 @@
lu->retries = 0;
PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
}
- queue_delayed_work(sbp2_wq, &lu->work, DIV_ROUND_UP(HZ, 5));
+ if (queue_delayed_work(sbp2_wq, &lu->work, DIV_ROUND_UP(HZ, 5)))
+ kref_get(&lu->tgt->kref);
+ kref_put(&lu->tgt->kref, sbp2_release_target);
return;
}
diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c
index 516d943..075b4d9 100644
--- a/drivers/macintosh/windfarm_core.c
+++ b/drivers/macintosh/windfarm_core.c
@@ -94,7 +94,9 @@
DBG("wf: thread started\n");
set_freezable();
- while(!kthread_should_stop()) {
+ while (!kthread_should_stop()) {
+ try_to_freeze();
+
if (time_after_eq(jiffies, next)) {
wf_notify(WF_EVENT_TICK, NULL);
if (wf_overtemp) {
@@ -116,12 +118,6 @@
delay = next - jiffies;
if (delay <= HZ)
schedule_timeout_interruptible(delay);
-
- /* there should be no non-suspend signal, but oh well */
- if (signal_pending(current) && !try_to_freeze()) {
- printk(KERN_WARNING "windfarm: thread got sigl !\n");
- break;
- }
}
DBG("wf: thread stopped\n");
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5f800a6..cb581eb 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -136,10 +136,11 @@
If you don't know what to use this for, you don't need it.
config VETH
- tristate "Virtual ethernet device"
+ tristate "Virtual ethernet pair device"
---help---
- The device is an ethernet tunnel. Devices are created in pairs. When
- one end receives the packet it appears on its pair and vice versa.
+ This device is a local ethernet tunnel. Devices are created in pairs.
+ When one end receives the packet it appears on its pair and vice
+ versa.
config NET_SB1000
tristate "General Instruments Surfboard 1000"
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index e0119f6..580cb4a 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -762,26 +762,20 @@
if (copy_from_user(&addr,
(void __user *) arg, AX25_ADDR_LEN)) {
- err = -EFAULT;
+ err = -EFAULT;
+ break;
+ }
+
+ netif_tx_lock_bh(dev);
+ memcpy(dev->dev_addr, &addr, AX25_ADDR_LEN);
+ netif_tx_unlock_bh(dev);
+
+ err = 0;
break;
}
- netif_tx_lock_bh(dev);
- memcpy(dev->dev_addr, &addr, AX25_ADDR_LEN);
- netif_tx_unlock_bh(dev);
-
- err = 0;
- break;
- }
-
- /* Allow stty to read, but not set, the serial port */
- case TCGETS:
- case TCGETA:
- err = n_tty_ioctl(tty, (struct file *) file, cmd, arg);
- break;
-
default:
- err = -ENOIOCTLCMD;
+ err = tty_mode_ioctl(tty, file, cmd, arg);
}
sp_put(sp);
diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c
index 2c6f7be..fc753d7 100644
--- a/drivers/net/irda/irtty-sir.c
+++ b/drivers/net/irda/irtty-sir.c
@@ -434,11 +434,6 @@
IRDA_ASSERT(dev != NULL, return -1;);
switch (cmd) {
- case TCGETS:
- case TCGETA:
- err = n_tty_ioctl(tty, file, cmd, arg);
- break;
-
case IRTTY_IOCTDONGLE:
/* this call blocks for completion */
err = sirdev_set_dongle(dev, (IRDA_DONGLE) arg);
@@ -454,7 +449,7 @@
err = -EFAULT;
break;
default:
- err = -ENOIOCTLCMD;
+ err = tty_mode_ioctl(tty, file, cmd, arg);
break;
}
return err;
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 27f5b90..8d278c8 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -309,16 +309,11 @@
err = 0;
break;
- case TCGETS:
- case TCGETA:
- err = n_tty_ioctl(tty, file, cmd, arg);
- break;
-
case TCFLSH:
/* flush our buffers and the serial port's buffer */
if (arg == TCIOFLUSH || arg == TCOFLUSH)
ppp_async_flush_output(ap);
- err = n_tty_ioctl(tty, file, cmd, arg);
+ err = tty_perform_flush(tty, arg);
break;
case FIONREAD:
@@ -329,7 +324,8 @@
break;
default:
- err = -ENOIOCTLCMD;
+ /* Try the various mode ioctls */
+ err = tty_mode_ioctl(tty, file, cmd, arg);
}
ap_put(ap);
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index ce64032..00e2fb4 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -349,16 +349,11 @@
err = 0;
break;
- case TCGETS:
- case TCGETA:
- err = n_tty_ioctl(tty, file, cmd, arg);
- break;
-
case TCFLSH:
/* flush our buffers and the serial port's buffer */
if (arg == TCIOFLUSH || arg == TCOFLUSH)
ppp_sync_flush_output(ap);
- err = n_tty_ioctl(tty, file, cmd, arg);
+ err = tty_perform_flush(tty, arg);
break;
case FIONREAD:
@@ -369,7 +364,8 @@
break;
default:
- err = -ENOIOCTLCMD;
+ err = tty_mode_ioctl(tty, file, cmd, arg);
+ break;
}
sp_put(ap);
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index f8904fd..a7556cd 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -488,7 +488,7 @@
{
struct pppol2tp_session *session = NULL;
struct pppol2tp_tunnel *tunnel;
- unsigned char *ptr;
+ unsigned char *ptr, *optr;
u16 hdrflags;
u16 tunnel_id, session_id;
int length;
@@ -496,7 +496,7 @@
tunnel = pppol2tp_sock_to_tunnel(sock);
if (tunnel == NULL)
- goto error;
+ goto no_tunnel;
/* UDP always verifies the packet length. */
__skb_pull(skb, sizeof(struct udphdr));
@@ -509,7 +509,7 @@
}
/* Point to L2TP header */
- ptr = skb->data;
+ optr = ptr = skb->data;
/* Get L2TP header flags */
hdrflags = ntohs(*(__be16*)ptr);
@@ -637,12 +637,14 @@
/* If offset bit set, skip it. */
if (hdrflags & L2TP_HDRFLAG_O) {
offset = ntohs(*(__be16 *)ptr);
- skb->transport_header += 2 + offset;
- if (!pskb_may_pull(skb, skb_transport_offset(skb) + 2))
- goto discard;
+ ptr += 2 + offset;
}
- __skb_pull(skb, skb_transport_offset(skb));
+ offset = ptr - optr;
+ if (!pskb_may_pull(skb, offset))
+ goto discard;
+
+ __skb_pull(skb, offset);
/* Skip PPP header, if present. In testing, Microsoft L2TP clients
* don't send the PPP header (PPP header compression enabled), but
@@ -652,6 +654,9 @@
* Note that skb->data[] isn't dereferenced from a u16 ptr here since
* the field may be unaligned.
*/
+ if (!pskb_may_pull(skb, 2))
+ goto discard;
+
if ((skb->data[0] == 0xff) && (skb->data[1] == 0x03))
skb_pull(skb, 2);
@@ -709,6 +714,10 @@
return 0;
error:
+ /* Put UDP header back */
+ __skb_push(skb, sizeof(struct udphdr));
+
+no_tunnel:
return 1;
}
@@ -1050,6 +1059,8 @@
/* Get routing info from the tunnel socket */
dst_release(skb->dst);
skb->dst = sk_dst_get(sk_tun);
+ skb_orphan(skb);
+ skb->sk = sk_tun;
/* Queue the packet to IP for output */
len = skb->len;
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index b822859..73a7e65 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -78,12 +78,6 @@
* stack will need to know about I/O vectors or something similar.
*/
-/*
- * sysctl_[wr]mem_max are checked at init time to see if they are at
- * least 256KB and increased to 256KB if they are not. This is done to
- * avoid ending up with socket buffers smaller than the MTU size,
- */
-
static int __devinit rr_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -561,18 +555,6 @@
sram_size = rr_read_eeprom_word(rrpriv, (void *)8);
printk(" SRAM size 0x%06x\n", sram_size);
- if (sysctl_rmem_max < 262144){
- printk(" Receive socket buffer limit too low (%i), "
- "setting to 262144\n", sysctl_rmem_max);
- sysctl_rmem_max = 262144;
- }
-
- if (sysctl_wmem_max < 262144){
- printk(" Transmit socket buffer limit too low (%i), "
- "setting to 262144\n", sysctl_wmem_max);
- sysctl_wmem_max = 262144;
- }
-
return 0;
}
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index 335b7cc..251a3ce 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -1218,14 +1218,8 @@
return 0;
/* VSV changes end */
#endif
-
- /* Allow stty to read, but not set, the serial port */
- case TCGETS:
- case TCGETA:
- return n_tty_ioctl(tty, file, cmd, arg);
-
default:
- return -ENOIOCTLCMD;
+ return tty_mode_ioctl(tty, file, cmd, arg);
}
}
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 5a96d74..a12c9c4 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -93,13 +93,9 @@
To compile this driver as a module, choose M here: the
module will be called rtl8150.
-config USB_USBNET_MII
- tristate
- default n
-
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
- select MII if USB_USBNET_MII != n
+ select MII
---help---
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
@@ -135,7 +131,6 @@
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
depends on USB_USBNET && NET_ETHERNET
select CRC32
- select USB_USBNET_MII
default y
help
This option adds support for ASIX AX88xxx based USB 2.0
@@ -190,7 +185,6 @@
tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
depends on USB_USBNET
select CRC32
- select USB_USBNET_MII
help
This option adds support for Davicom DM9601 based USB 1.1
10/100 Ethernet adapters.
@@ -225,7 +219,6 @@
config USB_NET_MCS7830
tristate "MosChip MCS7830 based Ethernet adapters"
depends on USB_USBNET
- select USB_USBNET_MII
help
Choose this option if you're using a 10/100 Ethernet USB2
adapter based on the MosChip 7830 controller. This includes
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index acd5f1c..8ed1fc5 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -683,9 +683,6 @@
* they'll probably want to use this base set.
*/
-#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
-#define HAVE_MII
-
int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
{
struct usbnet *dev = netdev_priv(net);
@@ -744,8 +741,6 @@
}
EXPORT_SYMBOL_GPL(usbnet_nway_reset);
-#endif /* HAVE_MII */
-
void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
{
struct usbnet *dev = netdev_priv(net);
@@ -776,12 +771,10 @@
/* drivers may override default ethtool_ops in their bind() routine */
static struct ethtool_ops usbnet_ethtool_ops = {
-#ifdef HAVE_MII
.get_settings = usbnet_get_settings,
.set_settings = usbnet_set_settings,
.get_link = usbnet_get_link,
.nway_reset = usbnet_nway_reset,
-#endif
.get_drvinfo = usbnet_get_drvinfo,
.get_msglevel = usbnet_get_msglevel,
.set_msglevel = usbnet_set_msglevel,
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index c48b1cc..1e89d4d 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -719,12 +719,8 @@
return 0;
case SIOCSIFHWADDR:
return -EINVAL;
- /* Allow stty to read, but not set, the serial port */
- case TCGETS:
- case TCGETA:
- return n_tty_ioctl(tty, file, cmd, arg);
default:
- return -ENOIOCTLCMD;
+ return tty_mode_ioctl(tty, file, cmd, arg);
}
}
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index 4bd14b3..88efe1b 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -2735,16 +2735,8 @@
return -EFAULT;
return set_mac_address(strip_info, &addr);
}
- /*
- * Allow stty to read, but not set, the serial port
- */
-
- case TCGETS:
- case TCGETA:
- return n_tty_ioctl(tty, file, cmd, arg);
- break;
default:
- return -ENOIOCTLCMD;
+ return tty_mode_ioctl(tty, file, cmd, arg);
break;
}
return 0;
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index dfef83f..a85f2d3 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -329,12 +329,14 @@
static void ulite_console_wait_tx(struct uart_port *port)
{
int i;
+ u8 val;
- /* wait up to 10ms for the character(s) to be sent */
- for (i = 0; i < 10000; i++) {
- if (readb(port->membase + ULITE_STATUS) & ULITE_STATUS_TXEMPTY)
+ /* Spin waiting for TX fifo to have space available */
+ for (i = 0; i < 100000; i++) {
+ val = readb(port->membase + ULITE_STATUS);
+ if ((val & ULITE_STATUS_TXFULL) == 0)
break;
- udelay(1);
+ cpu_relax();
}
}
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 58bf3f5..e9923ca 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -1062,7 +1062,7 @@
subscribe.sctp_shutdown_event = 1;
subscribe.sctp_partial_delivery_event = 1;
- result = kernel_setsockopt(sock, SOL_SOCKET, SO_RCVBUF,
+ result = kernel_setsockopt(sock, SOL_SOCKET, SO_RCVBUFFORCE,
(char *)&bufsize, sizeof(bufsize));
if (result)
log_print("Error increasing buffer space on socket %d", result);
@@ -1454,10 +1454,6 @@
if (!con_cache)
goto out;
- /* Set some sysctl minima */
- if (sysctl_rmem_max < NEEDED_RMEM)
- sysctl_rmem_max = NEEDED_RMEM;
-
/* Start listening */
if (dlm_config.ci_protocol == 0)
error = tcp_listen_for_all();
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 4ba7f0b..ce62c15 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -3946,7 +3946,7 @@
struct ocfs2_merge_ctxt ctxt;
struct ocfs2_extent_list *rightmost_el;
- if (!rec->e_flags & OCFS2_EXT_UNWRITTEN) {
+ if (!(rec->e_flags & OCFS2_EXT_UNWRITTEN)) {
ret = -EIO;
mlog_errno(ret);
goto out;
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index c69c1b3..556e34c 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -729,6 +729,27 @@
}
/*
+ * Nonsparse file systems fully allocate before we get to the write
+ * code. This prevents ocfs2_write() from tagging the write as an
+ * allocating one, which means ocfs2_map_page_blocks() might try to
+ * read-in the blocks at the tail of our file. Avoid reading them by
+ * testing i_size against each block offset.
+ */
+static int ocfs2_should_read_blk(struct inode *inode, struct page *page,
+ unsigned int block_start)
+{
+ u64 offset = page_offset(page) + block_start;
+
+ if (ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)))
+ return 1;
+
+ if (i_size_read(inode) > offset)
+ return 1;
+
+ return 0;
+}
+
+/*
* Some of this taken from block_prepare_write(). We already have our
* mapping by now though, and the entire write will be allocating or
* it won't, so not much need to use BH_New.
@@ -781,6 +802,7 @@
set_buffer_uptodate(bh);
} else if (!buffer_uptodate(bh) && !buffer_delay(bh) &&
!buffer_new(bh) &&
+ ocfs2_should_read_blk(inode, page, block_start) &&
(block_start < from || block_end > to)) {
ll_rw_block(READ, 1, &bh);
*wait_bh++=bh;
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 9cc7c04..f02ccb3 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -267,7 +267,7 @@
current_page = cs / spp;
page = reg->hr_slot_data[current_page];
- vec_len = min(PAGE_CACHE_SIZE,
+ vec_len = min(PAGE_CACHE_SIZE - vec_start,
(max_slots-cs) * (PAGE_CACHE_SIZE/spp) );
mlog(ML_HB_BIO, "page %d, vec_len = %u, vec_start = %u\n",
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index 3094ddb..1957a5e 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -318,9 +318,9 @@
static void ocfs2_drop_dentry_lock(struct ocfs2_super *osb,
struct ocfs2_dentry_lock *dl)
{
+ iput(dl->dl_inode);
ocfs2_simple_drop_lockres(osb, &dl->dl_lockres);
ocfs2_lock_res_free(&dl->dl_lockres);
- iput(dl->dl_inode);
kfree(dl);
}
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 6a2f143..63b28fd 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -208,9 +208,9 @@
return NULL;
}
-struct buffer_head *ocfs2_find_entry_el(const char *name, int namelen,
- struct inode *dir,
- struct ocfs2_dir_entry **res_dir)
+static struct buffer_head *ocfs2_find_entry_el(const char *name, int namelen,
+ struct inode *dir,
+ struct ocfs2_dir_entry **res_dir)
{
struct super_block *sb;
struct buffer_head *bh_use[NAMEI_RA_SIZE];
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 41c76ff..4e97dcc 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -670,7 +670,7 @@
{
mlog_entry_void();
- BUG_ON((!lockres->l_flags & OCFS2_LOCK_BUSY));
+ BUG_ON((!(lockres->l_flags & OCFS2_LOCK_BUSY)));
BUG_ON(lockres->l_flags & OCFS2_LOCK_ATTACHED);
if (lockres->l_requested > LKM_NLMODE &&
@@ -980,18 +980,6 @@
goto unlock;
}
- if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED)) {
- /* lock has not been created yet. */
- spin_unlock_irqrestore(&lockres->l_lock, flags);
-
- ret = ocfs2_lock_create(osb, lockres, LKM_NLMODE, 0);
- if (ret < 0) {
- mlog_errno(ret);
- goto out;
- }
- goto again;
- }
-
if (lockres->l_flags & OCFS2_LOCK_BLOCKED &&
!ocfs2_may_continue_on_blocked_lock(lockres, level)) {
/* is the lock is currently blocked on behalf of
@@ -1006,7 +994,14 @@
mlog(ML_ERROR, "lockres %s has action %u pending\n",
lockres->l_name, lockres->l_action);
- lockres->l_action = OCFS2_AST_CONVERT;
+ if (!(lockres->l_flags & OCFS2_LOCK_ATTACHED)) {
+ lockres->l_action = OCFS2_AST_ATTACH;
+ lkm_flags &= ~LKM_CONVERT;
+ } else {
+ lockres->l_action = OCFS2_AST_CONVERT;
+ lkm_flags |= LKM_CONVERT;
+ }
+
lockres->l_requested = level;
lockres_or_flags(lockres, OCFS2_LOCK_BUSY);
spin_unlock_irqrestore(&lockres->l_lock, flags);
@@ -1021,7 +1016,7 @@
status = dlmlock(osb->dlm,
level,
&lockres->l_lksb,
- lkm_flags|LKM_CONVERT,
+ lkm_flags,
lockres->l_name,
OCFS2_LOCK_ID_MAX_LEN - 1,
ocfs2_locking_ast,
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index f92fe91..bbac7cd 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1891,9 +1891,11 @@
ssize_t written = 0;
size_t ocount; /* original count */
size_t count; /* after file limit checks */
- loff_t *ppos = &iocb->ki_pos;
+ loff_t old_size, *ppos = &iocb->ki_pos;
+ u32 old_clusters;
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_path.dentry->d_inode;
+ struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
mlog_entry("(0x%p, %u, '%.*s')\n", file,
(unsigned int)nr_segs,
@@ -1949,6 +1951,13 @@
goto relock;
}
+ /*
+ * To later detect whether a journal commit for sync writes is
+ * necessary, we sample i_size, and cluster count here.
+ */
+ old_size = i_size_read(inode);
+ old_clusters = OCFS2_I(inode)->ip_clusters;
+
/* communicate with ocfs2_dio_end_io */
ocfs2_iocb_set_rw_locked(iocb, rw_level);
@@ -1978,6 +1987,21 @@
/* buffered aio wouldn't have proper lock coverage today */
BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
+ if ((file->f_flags & O_SYNC && !direct_io) || IS_SYNC(inode)) {
+ /*
+ * The generic write paths have handled getting data
+ * to disk, but since we don't make use of the dirty
+ * inode list, a manual journal commit is necessary
+ * here.
+ */
+ if (old_size != i_size_read(inode) ||
+ old_clusters != OCFS2_I(inode)->ip_clusters) {
+ ret = journal_force_commit(osb->journal->j_journal);
+ if (ret < 0)
+ written = ret;
+ }
+ }
+
/*
* deep in g_f_a_w_n()->ocfs2_direct_IO we pass in a ocfs2_dio_end_io
* function pointer which is called when o_direct io completes so that
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 7292590..989ac27 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -1105,9 +1105,16 @@
goto bail;
}
- if (!new_de && new_inode)
- mlog(ML_ERROR, "inode %lu does not exist in it's parent "
- "directory!", new_inode->i_ino);
+ if (!new_de && new_inode) {
+ /*
+ * Target was unlinked by another node while we were
+ * waiting to get to ocfs2_rename(). There isn't
+ * anything we can do here to help the situation, so
+ * bubble up the appropriate error.
+ */
+ status = -ENOENT;
+ goto bail;
+ }
/* In case we need to overwrite an existing file, we blow it
* away first */
diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c
index 749def0..153554c 100644
--- a/fs/proc/proc_net.c
+++ b/fs/proc/proc_net.c
@@ -26,13 +26,6 @@
#include "internal.h"
-struct proc_dir_entry *proc_net_create(struct net *net,
- const char *name, mode_t mode, get_info_t *get_info)
-{
- return create_proc_info_entry(name,mode, net->proc_net, get_info);
-}
-EXPORT_SYMBOL_GPL(proc_net_create);
-
struct proc_dir_entry *proc_net_fops_create(struct net *net,
const char *name, mode_t mode, const struct file_operations *fops)
{
diff --git a/include/asm-frv/irq.h b/include/asm-frv/irq.h
index 8fefd6b..3a66ebd 100644
--- a/include/asm-frv/irq.h
+++ b/include/asm-frv/irq.h
@@ -12,9 +12,6 @@
#ifndef _ASM_IRQ_H_
#define _ASM_IRQ_H_
-/* this number is used when no interrupt has been assigned */
-#define NO_IRQ (-1)
-
#define NR_IRQS 48
#define IRQ_BASE_CPU (0 * 16)
#define IRQ_BASE_FPGA (1 * 16)
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index 86a54a4a..fea2d8f 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -11,6 +11,11 @@
extern unsigned long va_to_phys(unsigned long address);
extern pte_t *va_to_pte(unsigned long address);
extern unsigned long ioremap_bot, ioremap_base;
+
+#ifdef CONFIG_44x
+extern int icache_44x_need_flush;
+#endif
+
#endif /* __ASSEMBLY__ */
/*
@@ -562,6 +567,10 @@
: "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" (clr), "r" (set), "m" (*p)
: "cc" );
+#ifdef CONFIG_44x
+ if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+ icache_44x_need_flush = 1;
+#endif
return old;
}
#else
@@ -582,6 +591,10 @@
: "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
: "cc" );
+#ifdef CONFIG_44x
+ if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+ icache_44x_need_flush = 1;
+#endif
return old;
}
#endif
diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h
index cc6d872..11d5383 100644
--- a/include/asm-powerpc/systbl.h
+++ b/include/asm-powerpc/systbl.h
@@ -308,8 +308,8 @@
SYSCALL_SPU(getcpu)
COMPAT_SYS(epoll_pwait)
COMPAT_SYS_SPU(utimensat)
-COMPAT_SYS(fallocate)
COMPAT_SYS_SPU(signalfd)
COMPAT_SYS_SPU(timerfd)
SYSCALL_SPU(eventfd)
COMPAT_SYS_SPU(sync_file_range2)
+COMPAT_SYS(fallocate)
diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h
index f058955..780f826 100644
--- a/include/asm-powerpc/time.h
+++ b/include/asm-powerpc/time.h
@@ -176,25 +176,31 @@
#endif
}
+/*
+ * Note: Book E and 4xx processors differ from other PowerPC processors
+ * in when the decrementer generates its interrupt: on the 1 to 0
+ * transition for Book E/4xx, but on the 0 to -1 transition for others.
+ */
static inline void set_dec(int val)
{
#if defined(CONFIG_40x)
mtspr(SPRN_PIT, val);
#elif defined(CONFIG_8xx_CPU6)
- set_dec_cpu6(val);
+ set_dec_cpu6(val - 1);
#else
+#ifndef CONFIG_BOOKE
+ --val;
+#endif
#ifdef CONFIG_PPC_ISERIES
- int cur_dec;
-
if (firmware_has_feature(FW_FEATURE_ISERIES) &&
get_lppaca()->shared_proc) {
get_lppaca()->virtual_decr = val;
- cur_dec = get_dec();
- if (cur_dec > val)
+ if (get_dec() > val)
HvCall_setVirtualDecr();
- } else
+ return;
+ }
#endif
- mtspr(SPRN_DEC, val);
+ mtspr(SPRN_DEC, val);
#endif /* not 40x or 8xx_CPU6 */
}
diff --git a/include/asm-powerpc/tlbflush.h b/include/asm-powerpc/tlbflush.h
index b6b036c..e7b4c0d 100644
--- a/include/asm-powerpc/tlbflush.h
+++ b/include/asm-powerpc/tlbflush.h
@@ -1,5 +1,6 @@
#ifndef _ASM_POWERPC_TLBFLUSH_H
#define _ASM_POWERPC_TLBFLUSH_H
+
/*
* TLB flushing:
*
@@ -16,9 +17,6 @@
*/
#ifdef __KERNEL__
-struct mm_struct;
-struct vm_area_struct;
-
#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
/*
* TLB flushing for software loaded TLB chips
@@ -28,7 +26,9 @@
* specific tlbie's
*/
-extern void _tlbie(unsigned long address);
+#include <linux/mm.h>
+
+extern void _tlbie(unsigned long address, unsigned int pid);
#if defined(CONFIG_40x) || defined(CONFIG_8xx)
#define _tlbia() asm volatile ("tlbia; sync" : : : "memory")
@@ -44,13 +44,13 @@
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
{
- _tlbie(vmaddr);
+ _tlbie(vmaddr, vma->vm_mm->context.id);
}
static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
unsigned long vmaddr)
{
- _tlbie(vmaddr);
+ _tlbie(vmaddr, vma->vm_mm->context.id);
}
static inline void flush_tlb_range(struct vm_area_struct *vma,
diff --git a/include/asm-sparc64/vio.h b/include/asm-sparc64/vio.h
index f7417e9..d4de32f 100644
--- a/include/asm-sparc64/vio.h
+++ b/include/asm-sparc64/vio.h
@@ -8,6 +8,7 @@
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/list.h>
+#include <linux/log2.h>
#include <asm/ldc.h>
#include <asm/mdesc.h>
@@ -257,8 +258,7 @@
static inline u32 vio_dring_avail(struct vio_dring_state *dr,
unsigned int ring_size)
{
- /* Ensure build-time power-of-2. */
- BUILD_BUG_ON(ring_size & (ring_size - 1));
+ BUILD_BUG_ON(!is_power_of_2(ring_size));
return (dr->pending -
((dr->prod - dr->cons) & (ring_size - 1)));
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 7da2cee..35a8277 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -128,6 +128,18 @@
#ifdef __KERNEL__
#include <net/sock.h>
+#ifdef CONFIG_IP_MROUTE
+static inline int ip_mroute_opt(int opt)
+{
+ return (opt >= MRT_BASE) && (opt <= MRT_BASE + 10);
+}
+#else
+static inline int ip_mroute_opt(int opt)
+{
+ return 0;
+}
+#endif
+
extern int ip_mroute_setsockopt(struct sock *, int, char __user *, int);
extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg);
diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild
index f2eaea2..b87e83a 100644
--- a/include/linux/netfilter/Kbuild
+++ b/include/linux/netfilter/Kbuild
@@ -4,25 +4,28 @@
header-y += nfnetlink_log.h
header-y += nfnetlink_queue.h
header-y += xt_CLASSIFY.h
+header-y += xt_CONNMARK.h
+header-y += xt_CONNSECMARK.h
+header-y += xt_DSCP.h
+header-y += xt_MARK.h
+header-y += xt_NFLOG.h
+header-y += xt_NFQUEUE.h
+header-y += xt_SECMARK.h
+header-y += xt_TCPMSS.h
header-y += xt_comment.h
header-y += xt_connbytes.h
header-y += xt_connmark.h
-header-y += xt_CONNMARK.h
header-y += xt_conntrack.h
header-y += xt_dccp.h
header-y += xt_dscp.h
-header-y += xt_DSCP.h
header-y += xt_esp.h
-header-y += xt_helper.h
header-y += xt_hashlimit.h
+header-y += xt_helper.h
header-y += xt_length.h
header-y += xt_limit.h
header-y += xt_mac.h
header-y += xt_mark.h
-header-y += xt_MARK.h
header-y += xt_multiport.h
-header-y += xt_NFQUEUE.h
-header-y += xt_NFLOG.h
header-y += xt_pkttype.h
header-y += xt_policy.h
header-y += xt_realm.h
@@ -32,9 +35,6 @@
header-y += xt_string.h
header-y += xt_tcpmss.h
header-y += xt_tcpudp.h
-header-y += xt_SECMARK.h
-header-y += xt_CONNSECMARK.h
-header-y += xt_TCPMSS.h
unifdef-y += nf_conntrack_common.h
unifdef-y += nf_conntrack_ftp.h
diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild
index 7185792..3a7105b 100644
--- a/include/linux/netfilter_ipv4/Kbuild
+++ b/include/linux/netfilter_ipv4/Kbuild
@@ -1,47 +1,47 @@
-header-y += ipt_addrtype.h
-header-y += ipt_ah.h
header-y += ipt_CLASSIFY.h
header-y += ipt_CLUSTERIP.h
+header-y += ipt_CONNMARK.h
+header-y += ipt_DSCP.h
+header-y += ipt_ECN.h
+header-y += ipt_LOG.h
+header-y += ipt_MARK.h
+header-y += ipt_NFQUEUE.h
+header-y += ipt_REJECT.h
+header-y += ipt_SAME.h
+header-y += ipt_TCPMSS.h
+header-y += ipt_TOS.h
+header-y += ipt_TTL.h
+header-y += ipt_ULOG.h
+header-y += ipt_addrtype.h
+header-y += ipt_ah.h
header-y += ipt_comment.h
header-y += ipt_connbytes.h
header-y += ipt_connmark.h
-header-y += ipt_CONNMARK.h
header-y += ipt_conntrack.h
header-y += ipt_dccp.h
header-y += ipt_dscp.h
-header-y += ipt_DSCP.h
header-y += ipt_ecn.h
-header-y += ipt_ECN.h
header-y += ipt_esp.h
header-y += ipt_hashlimit.h
header-y += ipt_helper.h
header-y += ipt_iprange.h
header-y += ipt_length.h
header-y += ipt_limit.h
-header-y += ipt_LOG.h
header-y += ipt_mac.h
header-y += ipt_mark.h
-header-y += ipt_MARK.h
header-y += ipt_multiport.h
-header-y += ipt_NFQUEUE.h
header-y += ipt_owner.h
header-y += ipt_physdev.h
header-y += ipt_pkttype.h
header-y += ipt_policy.h
header-y += ipt_realm.h
header-y += ipt_recent.h
-header-y += ipt_REJECT.h
-header-y += ipt_SAME.h
header-y += ipt_sctp.h
header-y += ipt_state.h
header-y += ipt_string.h
header-y += ipt_tcpmss.h
-header-y += ipt_TCPMSS.h
header-y += ipt_tos.h
-header-y += ipt_TOS.h
header-y += ipt_ttl.h
-header-y += ipt_TTL.h
-header-y += ipt_ULOG.h
unifdef-y += ip_queue.h
unifdef-y += ip_tables.h
diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild
index 9dd978d..8887a5f 100644
--- a/include/linux/netfilter_ipv6/Kbuild
+++ b/include/linux/netfilter_ipv6/Kbuild
@@ -14,8 +14,8 @@
header-y += ip6t_multiport.h
header-y += ip6t_opts.h
header-y += ip6t_owner.h
-header-y += ip6t_policy.h
header-y += ip6t_physdev.h
+header-y += ip6t_policy.h
header-y += ip6t_rt.h
unifdef-y += ip6_tables.h
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 7c1f3b1..d5bfaba 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -192,7 +192,7 @@
/* finegrained unicast helpers: */
struct sock *netlink_getsockbyfilp(struct file *filp);
int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock,
- long timeo, struct sock *ssk);
+ long *timeo, struct sock *ssk);
void netlink_detachskb(struct sock *sk, struct sk_buff *skb);
int netlink_sendskb(struct sock *sk, struct sk_buff *skb);
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 1ff4616..1273c6e 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -196,8 +196,6 @@
return res;
}
-extern struct proc_dir_entry *proc_net_create(struct net *net,
- const char *name, mode_t mode, get_info_t *get_info);
extern struct proc_dir_entry *proc_net_fops_create(struct net *net,
const char *name, mode_t mode, const struct file_operations *fops);
extern void proc_net_remove(struct net *net, const char *name);
@@ -208,7 +206,6 @@
#define proc_bus NULL
#define proc_net_fops_create(net, name, mode, fops) ({ (void)(mode), NULL; })
-#define proc_net_create(net, name, mode, info) ({ (void)(mode), NULL; })
static inline void proc_net_remove(struct net *net, const char *name) {}
static inline void proc_flush_task(struct task_struct *task)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 56164d7..c555f54 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -332,7 +332,9 @@
extern int tty_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg);
-
+extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg);
+extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
extern dev_t tty_devnum(struct tty_struct *tty);
extern void proc_clear_tty(struct task_struct *p);
extern struct tty_struct *get_current_tty(void);
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index 4427dcd..8461cda 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -37,7 +37,6 @@
* I'll experiment with dynamic table growth later.
*/
struct inet_ehash_bucket {
- rwlock_t lock;
struct hlist_head chain;
struct hlist_head twchain;
};
@@ -100,6 +99,9 @@
* TIME_WAIT sockets use a separate chain (twchain).
*/
struct inet_ehash_bucket *ehash;
+ rwlock_t *ehash_locks;
+ unsigned int ehash_size;
+ unsigned int ehash_locks_mask;
/* Ok, let's try this, I give up, we do need a local binding
* TCP hash as well as the others for fast bind/connect.
@@ -107,7 +109,7 @@
struct inet_bind_hashbucket *bhash;
unsigned int bhash_size;
- unsigned int ehash_size;
+ /* Note : 4 bytes padding on 64 bit arches */
/* All sockets in TCP_LISTEN state will be in here. This is the only
* table where wildcard'd TCP sockets can exist. Hash function here
@@ -134,6 +136,62 @@
return &hashinfo->ehash[hash & (hashinfo->ehash_size - 1)];
}
+static inline rwlock_t *inet_ehash_lockp(
+ struct inet_hashinfo *hashinfo,
+ unsigned int hash)
+{
+ return &hashinfo->ehash_locks[hash & hashinfo->ehash_locks_mask];
+}
+
+static inline int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo)
+{
+ unsigned int i, size = 256;
+#if defined(CONFIG_PROVE_LOCKING)
+ unsigned int nr_pcpus = 2;
+#else
+ unsigned int nr_pcpus = num_possible_cpus();
+#endif
+ if (nr_pcpus >= 4)
+ size = 512;
+ if (nr_pcpus >= 8)
+ size = 1024;
+ if (nr_pcpus >= 16)
+ size = 2048;
+ if (nr_pcpus >= 32)
+ size = 4096;
+ if (sizeof(rwlock_t) != 0) {
+#ifdef CONFIG_NUMA
+ if (size * sizeof(rwlock_t) > PAGE_SIZE)
+ hashinfo->ehash_locks = vmalloc(size * sizeof(rwlock_t));
+ else
+#endif
+ hashinfo->ehash_locks = kmalloc(size * sizeof(rwlock_t),
+ GFP_KERNEL);
+ if (!hashinfo->ehash_locks)
+ return ENOMEM;
+ for (i = 0; i < size; i++)
+ rwlock_init(&hashinfo->ehash_locks[i]);
+ }
+ hashinfo->ehash_locks_mask = size - 1;
+ return 0;
+}
+
+static inline void inet_ehash_locks_free(struct inet_hashinfo *hashinfo)
+{
+ if (hashinfo->ehash_locks) {
+#ifdef CONFIG_NUMA
+ unsigned int size = (hashinfo->ehash_locks_mask + 1) *
+ sizeof(rwlock_t);
+ if (size > PAGE_SIZE)
+ vfree(hashinfo->ehash_locks);
+ else
+#else
+ kfree(hashinfo->ehash_locks);
+#endif
+ hashinfo->ehash_locks = NULL;
+ }
+}
+
extern struct inet_bind_bucket *
inet_bind_bucket_create(struct kmem_cache *cachep,
struct inet_bind_hashbucket *head,
@@ -222,7 +280,7 @@
sk->sk_hash = inet_sk_ehashfn(sk);
head = inet_ehash_bucket(hashinfo, sk->sk_hash);
list = &head->chain;
- lock = &head->lock;
+ lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
write_lock(lock);
}
__sk_add_node(sk, list);
@@ -253,7 +311,7 @@
inet_listen_wlock(hashinfo);
lock = &hashinfo->lhash_lock;
} else {
- lock = &inet_ehash_bucket(hashinfo, sk->sk_hash)->lock;
+ lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
write_lock_bh(lock);
}
@@ -354,9 +412,10 @@
*/
unsigned int hash = inet_ehashfn(daddr, hnum, saddr, sport);
struct inet_ehash_bucket *head = inet_ehash_bucket(hashinfo, hash);
+ rwlock_t *lock = inet_ehash_lockp(hashinfo, hash);
prefetch(head->chain.first);
- read_lock(&head->lock);
+ read_lock(lock);
sk_for_each(sk, node, &head->chain) {
if (INET_MATCH(sk, hash, acookie, saddr, daddr, ports, dif))
goto hit; /* You sunk my battleship! */
@@ -369,7 +428,7 @@
}
sk = NULL;
out:
- read_unlock(&head->lock);
+ read_unlock(lock);
return sk;
hit:
sock_hold(sk);
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index 8cadc77..ed514bf 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -185,6 +185,12 @@
}
#else /* CONFIG_IP_MULTIPLE_TABLES */
+extern void __init fib4_rules_init(void);
+
+#ifdef CONFIG_NET_CLS_ROUTE
+extern u32 fib_rules_tclass(struct fib_result *res);
+#endif
+
#define ip_fib_local_table fib_get_table(RT_TABLE_LOCAL)
#define ip_fib_main_table fib_get_table(RT_TABLE_MAIN)
@@ -214,15 +220,6 @@
/* Exported by fib_hash.c */
extern struct fib_table *fib_hash_init(u32 id);
-#ifdef CONFIG_IP_MULTIPLE_TABLES
-extern void __init fib4_rules_init(void);
-
-#ifdef CONFIG_NET_CLS_ROUTE
-extern u32 fib_rules_tclass(struct fib_result *res);
-#endif
-
-#endif
-
static inline void fib_combine_itag(u32 *itag, struct fib_result *res)
{
#ifdef CONFIG_NET_CLS_ROUTE
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 4187056..67ea2c0 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -520,6 +520,10 @@
spinlock_t lock; /* lock for state transition */
volatile __u16 flags; /* status flags */
volatile __u16 state; /* state info */
+ volatile __u16 old_state; /* old state, to be used for
+ * state transition triggerd
+ * synchronization
+ */
/* Control members */
struct ip_vs_conn *control; /* Master control connection */
@@ -901,6 +905,10 @@
extern void ip_vs_use_count_dec(void);
extern int ip_vs_control_init(void);
extern void ip_vs_control_cleanup(void);
+extern struct ip_vs_dest *
+ip_vs_find_dest(__be32 daddr, __be16 dport,
+ __be32 vaddr, __be16 vport, __u16 protocol);
+extern struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp);
/*
diff --git a/include/net/sock.h b/include/net/sock.h
index 20de3fa..5504fb9 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -560,6 +560,14 @@
void (*unhash)(struct sock *sk);
int (*get_port)(struct sock *sk, unsigned short snum);
+#ifdef CONFIG_SMP
+ /* Keeping track of sockets in use */
+ void (*inuse_add)(struct proto *prot, int inc);
+ int (*inuse_getval)(const struct proto *prot);
+ int *inuse_ptr;
+#else
+ int inuse;
+#endif
/* Memory pressure */
void (*enter_memory_pressure)(void);
atomic_t *memory_allocated; /* Current allocated memory. */
@@ -592,12 +600,38 @@
#ifdef SOCK_REFCNT_DEBUG
atomic_t socks;
#endif
- struct {
- int inuse;
- u8 __pad[SMP_CACHE_BYTES - sizeof(int)];
- } stats[NR_CPUS];
};
+/*
+ * Special macros to let protos use a fast version of inuse{get|add}
+ * using a static percpu variable per proto instead of an allocated one,
+ * saving one dereference.
+ * This might be changed if/when dynamic percpu vars become fast.
+ */
+#ifdef CONFIG_SMP
+# define DEFINE_PROTO_INUSE(NAME) \
+static DEFINE_PER_CPU(int, NAME##_inuse); \
+static void NAME##_inuse_add(struct proto *prot, int inc) \
+{ \
+ __get_cpu_var(NAME##_inuse) += inc; \
+} \
+ \
+static int NAME##_inuse_getval(const struct proto *prot)\
+{ \
+ int res = 0, cpu; \
+ \
+ for_each_possible_cpu(cpu) \
+ res += per_cpu(NAME##_inuse, cpu); \
+ return res; \
+}
+# define REF_PROTO_INUSE(NAME) \
+ .inuse_add = NAME##_inuse_add, \
+ .inuse_getval = NAME##_inuse_getval,
+#else
+# define DEFINE_PROTO_INUSE(NAME)
+# define REF_PROTO_INUSE(NAME)
+#endif
+
extern int proto_register(struct proto *prot, int alloc_slab);
extern void proto_unregister(struct proto *prot);
@@ -629,12 +663,29 @@
/* Called with local bh disabled */
static __inline__ void sock_prot_inc_use(struct proto *prot)
{
- prot->stats[smp_processor_id()].inuse++;
+#ifdef CONFIG_SMP
+ prot->inuse_add(prot, 1);
+#else
+ prot->inuse++;
+#endif
}
static __inline__ void sock_prot_dec_use(struct proto *prot)
{
- prot->stats[smp_processor_id()].inuse--;
+#ifdef CONFIG_SMP
+ prot->inuse_add(prot, -1);
+#else
+ prot->inuse--;
+#endif
+}
+
+static __inline__ int sock_prot_inuse(struct proto *proto)
+{
+#ifdef CONFIG_SMP
+ return proto->inuse_getval(proto);
+#else
+ return proto->inuse;
+#endif
}
/* With per-bucket locks this operation is not-atomic, so that
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index bfa274b..1e04cd4 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -1010,6 +1010,8 @@
return -EINVAL;
}
if (notification.sigev_notify == SIGEV_THREAD) {
+ long timeo;
+
/* create the notify skb */
nc = alloc_skb(NOTIFY_COOKIE_LEN, GFP_KERNEL);
ret = -ENOMEM;
@@ -1038,8 +1040,8 @@
goto out;
}
- ret = netlink_attachskb(sock, nc, 0,
- MAX_SCHEDULE_TIMEOUT, NULL);
+ timeo = MAX_SCHEDULE_TIMEOUT;
+ ret = netlink_attachskb(sock, nc, 0, &timeo, NULL);
if (ret == 1)
goto retry;
if (ret) {
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 3fe4fc8..1037748 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -747,6 +747,7 @@
vlan_dev_set_ingress_priority(dev,
args.u.skb_priority,
args.vlan_qos);
+ err = 0;
break;
case SET_VLAN_EGRESS_PRIORITY_CMD:
diff --git a/net/bridge/netfilter/ebt_arp.c b/net/bridge/netfilter/ebt_arp.c
index 1a46952..1814139 100644
--- a/net/bridge/netfilter/ebt_arp.c
+++ b/net/bridge/netfilter/ebt_arp.c
@@ -34,7 +34,7 @@
ah->ar_pro, EBT_ARP_PTYPE))
return EBT_NOMATCH;
- if (info->bitmask & (EBT_ARP_SRC_IP | EBT_ARP_DST_IP)) {
+ if (info->bitmask & (EBT_ARP_SRC_IP | EBT_ARP_DST_IP | EBT_ARP_GRAT)) {
__be32 saddr, daddr, *sap, *dap;
if (ah->ar_pln != sizeof(__be32) || ah->ar_pro != htons(ETH_P_IP))
diff --git a/net/core/dst.c b/net/core/dst.c
index 16958e6..03daead 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -18,7 +18,6 @@
#include <linux/types.h>
#include <net/net_namespace.h>
-#include <net/net_namespace.h>
#include <net/dst.h>
/*
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 05979e3..29b8ee4 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1435,6 +1435,8 @@
kfree(tbl->phash_buckets);
tbl->phash_buckets = NULL;
+ remove_proc_entry(tbl->id, init_net.proc_net_stat);
+
free_percpu(tbl->stats);
tbl->stats = NULL;
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index e9f0964..3f6d37d 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -64,6 +64,20 @@
return kmem_cache_zalloc(net_cachep, GFP_KERNEL);
}
+static void net_free(struct net *net)
+{
+ if (!net)
+ return;
+
+ if (unlikely(atomic_read(&net->use_count) != 0)) {
+ printk(KERN_EMERG "network namespace not free! Usage: %d\n",
+ atomic_read(&net->use_count));
+ return;
+ }
+
+ kmem_cache_free(net_cachep, net);
+}
+
struct net *copy_net_ns(unsigned long flags, struct net *old_net)
{
struct net *new_net = NULL;
@@ -100,20 +114,6 @@
return new_net;
}
-static void net_free(struct net *net)
-{
- if (!net)
- return;
-
- if (unlikely(atomic_read(&net->use_count) != 0)) {
- printk(KERN_EMERG "network namespace not free! Usage: %d\n",
- atomic_read(&net->use_count));
- return;
- }
-
- kmem_cache_free(net_cachep, net);
-}
-
static void cleanup_net(struct work_struct *work)
{
struct pernet_operations *ops;
diff --git a/net/core/sock.c b/net/core/sock.c
index 12ad206..8fc2f84 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1801,11 +1801,65 @@
static DEFINE_RWLOCK(proto_list_lock);
static LIST_HEAD(proto_list);
+#ifdef CONFIG_SMP
+/*
+ * Define default functions to keep track of inuse sockets per protocol
+ * Note that often used protocols use dedicated functions to get a speed increase.
+ * (see DEFINE_PROTO_INUSE/REF_PROTO_INUSE)
+ */
+static void inuse_add(struct proto *prot, int inc)
+{
+ per_cpu_ptr(prot->inuse_ptr, smp_processor_id())[0] += inc;
+}
+
+static int inuse_get(const struct proto *prot)
+{
+ int res = 0, cpu;
+ for_each_possible_cpu(cpu)
+ res += per_cpu_ptr(prot->inuse_ptr, cpu)[0];
+ return res;
+}
+
+static int inuse_init(struct proto *prot)
+{
+ if (!prot->inuse_getval || !prot->inuse_add) {
+ prot->inuse_ptr = alloc_percpu(int);
+ if (prot->inuse_ptr == NULL)
+ return -ENOBUFS;
+
+ prot->inuse_getval = inuse_get;
+ prot->inuse_add = inuse_add;
+ }
+ return 0;
+}
+
+static void inuse_fini(struct proto *prot)
+{
+ if (prot->inuse_ptr != NULL) {
+ free_percpu(prot->inuse_ptr);
+ prot->inuse_ptr = NULL;
+ prot->inuse_getval = NULL;
+ prot->inuse_add = NULL;
+ }
+}
+#else
+static inline int inuse_init(struct proto *prot)
+{
+ return 0;
+}
+
+static inline void inuse_fini(struct proto *prot)
+{
+}
+#endif
+
int proto_register(struct proto *prot, int alloc_slab)
{
char *request_sock_slab_name = NULL;
char *timewait_sock_slab_name;
- int rc = -ENOBUFS;
+
+ if (inuse_init(prot))
+ goto out;
if (alloc_slab) {
prot->slab = kmem_cache_create(prot->name, prot->obj_size, 0,
@@ -1814,7 +1868,7 @@
if (prot->slab == NULL) {
printk(KERN_CRIT "%s: Can't create sock SLAB cache!\n",
prot->name);
- goto out;
+ goto out_free_inuse;
}
if (prot->rsk_prot != NULL) {
@@ -1858,9 +1912,8 @@
write_lock(&proto_list_lock);
list_add(&prot->node, &proto_list);
write_unlock(&proto_list_lock);
- rc = 0;
-out:
- return rc;
+ return 0;
+
out_free_timewait_sock_slab_name:
kfree(timewait_sock_slab_name);
out_free_request_sock_slab:
@@ -1873,7 +1926,10 @@
out_free_sock_slab:
kmem_cache_destroy(prot->slab);
prot->slab = NULL;
- goto out;
+out_free_inuse:
+ inuse_fini(prot);
+out:
+ return -ENOBUFS;
}
EXPORT_SYMBOL(proto_register);
@@ -1884,6 +1940,7 @@
list_del(&prot->node);
write_unlock(&proto_list_lock);
+ inuse_fini(prot);
if (prot->slab != NULL) {
kmem_cache_destroy(prot->slab);
prot->slab = NULL;
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 01a6a80..db17b83 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -922,6 +922,8 @@
.twsk_obj_size = sizeof(struct inet_timewait_sock),
};
+DEFINE_PROTO_INUSE(dccp_v4)
+
static struct proto dccp_v4_prot = {
.name = "DCCP",
.owner = THIS_MODULE,
@@ -950,6 +952,7 @@
.compat_setsockopt = compat_dccp_setsockopt,
.compat_getsockopt = compat_dccp_getsockopt,
#endif
+ REF_PROTO_INUSE(dccp_v4)
};
static struct net_protocol dccp_v4_protocol = {
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index 62428ff..87c98fb 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -1107,6 +1107,8 @@
.twsk_obj_size = sizeof(struct dccp6_timewait_sock),
};
+DEFINE_PROTO_INUSE(dccp_v6)
+
static struct proto dccp_v6_prot = {
.name = "DCCPv6",
.owner = THIS_MODULE,
@@ -1135,6 +1137,7 @@
.compat_setsockopt = compat_dccp_setsockopt,
.compat_getsockopt = compat_dccp_getsockopt,
#endif
+ REF_PROTO_INUSE(dccp_v6)
};
static struct inet6_protocol dccp_v6_protocol = {
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index d849739..7a3bea9 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -1072,11 +1072,13 @@
}
for (i = 0; i < dccp_hashinfo.ehash_size; i++) {
- rwlock_init(&dccp_hashinfo.ehash[i].lock);
INIT_HLIST_HEAD(&dccp_hashinfo.ehash[i].chain);
INIT_HLIST_HEAD(&dccp_hashinfo.ehash[i].twchain);
}
+ if (inet_ehash_locks_alloc(&dccp_hashinfo))
+ goto out_free_dccp_ehash;
+
bhash_order = ehash_order;
do {
@@ -1091,7 +1093,7 @@
if (!dccp_hashinfo.bhash) {
DCCP_CRIT("Failed to allocate DCCP bind hash table");
- goto out_free_dccp_ehash;
+ goto out_free_dccp_locks;
}
for (i = 0; i < dccp_hashinfo.bhash_size; i++) {
@@ -1121,6 +1123,8 @@
out_free_dccp_bhash:
free_pages((unsigned long)dccp_hashinfo.bhash, bhash_order);
dccp_hashinfo.bhash = NULL;
+out_free_dccp_locks:
+ inet_ehash_locks_free(&dccp_hashinfo);
out_free_dccp_ehash:
free_pages((unsigned long)dccp_hashinfo.ehash, ehash_order);
dccp_hashinfo.ehash = NULL;
@@ -1139,6 +1143,7 @@
free_pages((unsigned long)dccp_hashinfo.ehash,
get_order(dccp_hashinfo.ehash_size *
sizeof(struct inet_ehash_bucket)));
+ inet_ehash_locks_free(&dccp_hashinfo);
kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep);
dccp_ackvec_exit();
dccp_sysctl_exit();
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index 26130af..66e266f 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -1439,7 +1439,7 @@
#endif /* CONFIG_PROC_FS */
-static int __initdata addr[2];
+static int addr[2];
module_param_array(addr, int, NULL, 0444);
MODULE_PARM_DESC(addr, "The DECnet address of this machine: area,node");
diff --git a/net/ieee80211/ieee80211_crypt_tkip.c b/net/ieee80211/ieee80211_crypt_tkip.c
index 4cce353..58b2261 100644
--- a/net/ieee80211/ieee80211_crypt_tkip.c
+++ b/net/ieee80211/ieee80211_crypt_tkip.c
@@ -25,7 +25,6 @@
#include <net/ieee80211.h>
#include <linux/crypto.h>
-#include <linux/scatterlist.h>
#include <linux/crc32.h>
MODULE_AUTHOR("Jouni Malinen");
diff --git a/net/ieee80211/ieee80211_crypt_wep.c b/net/ieee80211/ieee80211_crypt_wep.c
index 866fc04..3fa30c4 100644
--- a/net/ieee80211/ieee80211_crypt_wep.c
+++ b/net/ieee80211/ieee80211_crypt_wep.c
@@ -22,7 +22,6 @@
#include <net/ieee80211.h>
#include <linux/crypto.h>
-#include <linux/scatterlist.h>
#include <linux/crc32.h>
MODULE_AUTHOR("Jouni Malinen");
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 6012390..732d8f0 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -59,6 +59,13 @@
#define FIB_TABLE_HASHSZ 1
static struct hlist_head fib_table_hash[FIB_TABLE_HASHSZ];
+static void __init fib4_rules_init(void)
+{
+ ip_fib_local_table = fib_hash_init(RT_TABLE_LOCAL);
+ hlist_add_head_rcu(&ip_fib_local_table->tb_hlist, &fib_table_hash[0]);
+ ip_fib_main_table = fib_hash_init(RT_TABLE_MAIN);
+ hlist_add_head_rcu(&ip_fib_main_table->tb_hlist, &fib_table_hash[0]);
+}
#else
#define FIB_TABLE_HASHSZ 256
@@ -905,14 +912,8 @@
for (i = 0; i < FIB_TABLE_HASHSZ; i++)
INIT_HLIST_HEAD(&fib_table_hash[i]);
-#ifndef CONFIG_IP_MULTIPLE_TABLES
- ip_fib_local_table = fib_hash_init(RT_TABLE_LOCAL);
- hlist_add_head_rcu(&ip_fib_local_table->tb_hlist, &fib_table_hash[0]);
- ip_fib_main_table = fib_hash_init(RT_TABLE_MAIN);
- hlist_add_head_rcu(&ip_fib_main_table->tb_hlist, &fib_table_hash[0]);
-#else
+
fib4_rules_init();
-#endif
register_netdevice_notifier(&fib_netdev_notifier);
register_inetaddr_notifier(&fib_inetaddr_notifier);
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index dc429b6..b017073 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -747,13 +747,14 @@
for (i = s_i; i < hashinfo->ehash_size; i++) {
struct inet_ehash_bucket *head = &hashinfo->ehash[i];
+ rwlock_t *lock = inet_ehash_lockp(hashinfo, i);
struct sock *sk;
struct hlist_node *node;
if (i > s_i)
s_num = 0;
- read_lock_bh(&head->lock);
+ read_lock_bh(lock);
num = 0;
sk_for_each(sk, node, &head->chain) {
struct inet_sock *inet = inet_sk(sk);
@@ -769,7 +770,7 @@
r->id.idiag_dport)
goto next_normal;
if (inet_csk_diag_dump(sk, skb, cb) < 0) {
- read_unlock_bh(&head->lock);
+ read_unlock_bh(lock);
goto done;
}
next_normal:
@@ -791,14 +792,14 @@
r->id.idiag_dport)
goto next_dying;
if (inet_twsk_diag_dump(tw, skb, cb) < 0) {
- read_unlock_bh(&head->lock);
+ read_unlock_bh(lock);
goto done;
}
next_dying:
++num;
}
}
- read_unlock_bh(&head->lock);
+ read_unlock_bh(lock);
}
done:
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 16eecc7..67704da 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -204,12 +204,13 @@
const __portpair ports = INET_COMBINED_PORTS(inet->dport, lport);
unsigned int hash = inet_ehashfn(daddr, lport, saddr, inet->dport);
struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash);
+ rwlock_t *lock = inet_ehash_lockp(hinfo, hash);
struct sock *sk2;
const struct hlist_node *node;
struct inet_timewait_sock *tw;
prefetch(head->chain.first);
- write_lock(&head->lock);
+ write_lock(lock);
/* Check TIME-WAIT sockets first. */
sk_for_each(sk2, node, &head->twchain) {
@@ -239,7 +240,7 @@
BUG_TRAP(sk_unhashed(sk));
__sk_add_node(sk, &head->chain);
sock_prot_inc_use(sk->sk_prot);
- write_unlock(&head->lock);
+ write_unlock(lock);
if (twp) {
*twp = tw;
@@ -255,7 +256,7 @@
return 0;
not_unique:
- write_unlock(&head->lock);
+ write_unlock(lock);
return -EADDRNOTAVAIL;
}
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 4e189e2..a60b99e 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -20,16 +20,16 @@
struct inet_bind_hashbucket *bhead;
struct inet_bind_bucket *tb;
/* Unlink from established hashes. */
- struct inet_ehash_bucket *ehead = inet_ehash_bucket(hashinfo, tw->tw_hash);
+ rwlock_t *lock = inet_ehash_lockp(hashinfo, tw->tw_hash);
- write_lock(&ehead->lock);
+ write_lock(lock);
if (hlist_unhashed(&tw->tw_node)) {
- write_unlock(&ehead->lock);
+ write_unlock(lock);
return;
}
__hlist_del(&tw->tw_node);
sk_node_init(&tw->tw_node);
- write_unlock(&ehead->lock);
+ write_unlock(lock);
/* Disassociate with bind bucket. */
bhead = &hashinfo->bhash[inet_bhashfn(tw->tw_num, hashinfo->bhash_size)];
@@ -59,6 +59,7 @@
const struct inet_sock *inet = inet_sk(sk);
const struct inet_connection_sock *icsk = inet_csk(sk);
struct inet_ehash_bucket *ehead = inet_ehash_bucket(hashinfo, sk->sk_hash);
+ rwlock_t *lock = inet_ehash_lockp(hashinfo, sk->sk_hash);
struct inet_bind_hashbucket *bhead;
/* Step 1: Put TW into bind hash. Original socket stays there too.
Note, that any socket with inet->num != 0 MUST be bound in
@@ -71,7 +72,7 @@
inet_twsk_add_bind_node(tw, &tw->tw_tb->owners);
spin_unlock(&bhead->lock);
- write_lock(&ehead->lock);
+ write_lock(lock);
/* Step 2: Remove SK from established hash. */
if (__sk_del_node_init(sk))
@@ -81,7 +82,7 @@
inet_twsk_add_node(tw, &ehead->twchain);
atomic_inc(&tw->tw_refcnt);
- write_unlock(&ehead->lock);
+ write_unlock(lock);
}
EXPORT_SYMBOL_GPL(__inet_twsk_hashdance);
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index e5f7dc2..fd99fbd 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -1183,6 +1183,17 @@
return err;
}
+static void ip_cork_release(struct inet_sock *inet)
+{
+ inet->cork.flags &= ~IPCORK_OPT;
+ kfree(inet->cork.opt);
+ inet->cork.opt = NULL;
+ if (inet->cork.rt) {
+ ip_rt_put(inet->cork.rt);
+ inet->cork.rt = NULL;
+ }
+}
+
/*
* Combined all pending IP fragments on the socket as one IP datagram
* and push them out.
@@ -1276,13 +1287,7 @@
}
out:
- inet->cork.flags &= ~IPCORK_OPT;
- kfree(inet->cork.opt);
- inet->cork.opt = NULL;
- if (inet->cork.rt) {
- ip_rt_put(inet->cork.rt);
- inet->cork.rt = NULL;
- }
+ ip_cork_release(inet);
return err;
error:
@@ -1295,19 +1300,12 @@
*/
void ip_flush_pending_frames(struct sock *sk)
{
- struct inet_sock *inet = inet_sk(sk);
struct sk_buff *skb;
while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL)
kfree_skb(skb);
- inet->cork.flags &= ~IPCORK_OPT;
- kfree(inet->cork.opt);
- inet->cork.opt = NULL;
- if (inet->cork.rt) {
- ip_rt_put(inet->cork.rt);
- inet->cork.rt = NULL;
- }
+ ip_cork_release(inet_sk(sk));
}
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index f51f20e..82817e5 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -437,10 +437,8 @@
/* If optlen==0, it is equivalent to val == 0 */
-#ifdef CONFIG_IP_MROUTE
- if (optname >= MRT_BASE && optname <= (MRT_BASE + 10))
+ if (ip_mroute_opt(optname))
return ip_mroute_setsockopt(sk,optname,optval,optlen);
-#endif
err = 0;
lock_sock(sk);
@@ -909,11 +907,9 @@
#ifdef CONFIG_NETFILTER
/* we need to exclude all possible ENOPROTOOPTs except default case */
if (err == -ENOPROTOOPT && optname != IP_HDRINCL &&
- optname != IP_IPSEC_POLICY && optname != IP_XFRM_POLICY
-#ifdef CONFIG_IP_MROUTE
- && (optname < MRT_BASE || optname > (MRT_BASE + 10))
-#endif
- ) {
+ optname != IP_IPSEC_POLICY &&
+ optname != IP_XFRM_POLICY &&
+ !ip_mroute_opt(optname)) {
lock_sock(sk);
err = nf_setsockopt(sk, PF_INET, optname, optval, optlen);
release_sock(sk);
@@ -935,11 +931,9 @@
#ifdef CONFIG_NETFILTER
/* we need to exclude all possible ENOPROTOOPTs except default case */
if (err == -ENOPROTOOPT && optname != IP_HDRINCL &&
- optname != IP_IPSEC_POLICY && optname != IP_XFRM_POLICY
-#ifdef CONFIG_IP_MROUTE
- && (optname < MRT_BASE || optname > (MRT_BASE + 10))
-#endif
- ) {
+ optname != IP_IPSEC_POLICY &&
+ optname != IP_XFRM_POLICY &&
+ !ip_mroute_opt(optname)) {
lock_sock(sk);
err = compat_nf_setsockopt(sk, PF_INET, optname,
optval, optlen);
@@ -967,11 +961,8 @@
if (level != SOL_IP)
return -EOPNOTSUPP;
-#ifdef CONFIG_IP_MROUTE
- if (optname >= MRT_BASE && optname <= MRT_BASE+10) {
+ if (ip_mroute_opt(optname))
return ip_mroute_getsockopt(sk,optname,optval,optlen);
- }
-#endif
if (get_user(len,optlen))
return -EFAULT;
@@ -1171,11 +1162,8 @@
err = do_ip_getsockopt(sk, level, optname, optval, optlen);
#ifdef CONFIG_NETFILTER
/* we need to exclude all possible ENOPROTOOPTs except default case */
- if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS
-#ifdef CONFIG_IP_MROUTE
- && (optname < MRT_BASE || optname > MRT_BASE+10)
-#endif
- ) {
+ if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS &&
+ !ip_mroute_opt(optname)) {
int len;
if (get_user(len,optlen))
@@ -1200,11 +1188,8 @@
int err = do_ip_getsockopt(sk, level, optname, optval, optlen);
#ifdef CONFIG_NETFILTER
/* we need to exclude all possible ENOPROTOOPTs except default case */
- if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS
-#ifdef CONFIG_IP_MROUTE
- && (optname < MRT_BASE || optname > MRT_BASE+10)
-#endif
- ) {
+ if (err == -ENOPROTOOPT && optname != IP_PKTOPTIONS &&
+ !ip_mroute_opt(optname)) {
int len;
if (get_user(len, optlen))
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index ca1b5fd..2c44a94 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <asm/semaphore.h>
#include <linux/crypto.h>
+#include <linux/err.h>
#include <linux/pfkeyv2.h>
#include <linux/percpu.h>
#include <linux/smp.h>
@@ -344,7 +345,7 @@
for_each_possible_cpu(cpu) {
struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0,
CRYPTO_ALG_ASYNC);
- if (!tfm)
+ if (IS_ERR(tfm))
goto error;
*per_cpu_ptr(tfms, cpu) = tfm;
}
diff --git a/net/ipv4/ipvs/ip_vs_conn.c b/net/ipv4/ipvs/ip_vs_conn.c
index 4b702f7..b7eeae6 100644
--- a/net/ipv4/ipvs/ip_vs_conn.c
+++ b/net/ipv4/ipvs/ip_vs_conn.c
@@ -426,6 +426,25 @@
/*
+ * Check if there is a destination for the connection, if so
+ * bind the connection to the destination.
+ */
+struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp)
+{
+ struct ip_vs_dest *dest;
+
+ if ((cp) && (!cp->dest)) {
+ dest = ip_vs_find_dest(cp->daddr, cp->dport,
+ cp->vaddr, cp->vport, cp->protocol);
+ ip_vs_bind_dest(cp, dest);
+ return dest;
+ } else
+ return NULL;
+}
+EXPORT_SYMBOL(ip_vs_try_bind_dest);
+
+
+/*
* Unbind a connection entry with its VS destination
* Called by the ip_vs_conn_expire function.
*/
diff --git a/net/ipv4/ipvs/ip_vs_core.c b/net/ipv4/ipvs/ip_vs_core.c
index c6ed765..20c884a 100644
--- a/net/ipv4/ipvs/ip_vs_core.c
+++ b/net/ipv4/ipvs/ip_vs_core.c
@@ -979,15 +979,23 @@
ret = NF_ACCEPT;
}
- /* increase its packet counter and check if it is needed
- to be synchronized */
+ /* Increase its packet counter and check if it is needed
+ * to be synchronized
+ *
+ * Sync connection if it is about to close to
+ * encorage the standby servers to update the connections timeout
+ */
atomic_inc(&cp->in_pkts);
if ((ip_vs_sync_state & IP_VS_STATE_MASTER) &&
- (cp->protocol != IPPROTO_TCP ||
- cp->state == IP_VS_TCP_S_ESTABLISHED) &&
- (atomic_read(&cp->in_pkts) % sysctl_ip_vs_sync_threshold[1]
- == sysctl_ip_vs_sync_threshold[0]))
+ (((cp->protocol != IPPROTO_TCP ||
+ cp->state == IP_VS_TCP_S_ESTABLISHED) &&
+ (atomic_read(&cp->in_pkts) % sysctl_ip_vs_sync_threshold[1]
+ == sysctl_ip_vs_sync_threshold[0])) ||
+ ((cp->protocol == IPPROTO_TCP) && (cp->old_state != cp->state) &&
+ ((cp->state == IP_VS_TCP_S_FIN_WAIT) ||
+ (cp->state == IP_VS_TCP_S_CLOSE)))))
ip_vs_sync_conn(cp);
+ cp->old_state = cp->state;
ip_vs_conn_put(cp);
return ret;
diff --git a/net/ipv4/ipvs/ip_vs_ctl.c b/net/ipv4/ipvs/ip_vs_ctl.c
index 7345fc2..3c4d22a 100644
--- a/net/ipv4/ipvs/ip_vs_ctl.c
+++ b/net/ipv4/ipvs/ip_vs_ctl.c
@@ -579,6 +579,32 @@
return NULL;
}
+/*
+ * Find destination by {daddr,dport,vaddr,protocol}
+ * Cretaed to be used in ip_vs_process_message() in
+ * the backup synchronization daemon. It finds the
+ * destination to be bound to the received connection
+ * on the backup.
+ *
+ * ip_vs_lookup_real_service() looked promissing, but
+ * seems not working as expected.
+ */
+struct ip_vs_dest *ip_vs_find_dest(__be32 daddr, __be16 dport,
+ __be32 vaddr, __be16 vport, __u16 protocol)
+{
+ struct ip_vs_dest *dest;
+ struct ip_vs_service *svc;
+
+ svc = ip_vs_service_get(0, protocol, vaddr, vport);
+ if (!svc)
+ return NULL;
+ dest = ip_vs_lookup_dest(svc, daddr, dport);
+ if (dest)
+ atomic_inc(&dest->refcnt);
+ ip_vs_service_put(svc);
+ return dest;
+}
+EXPORT_SYMBOL(ip_vs_find_dest);
/*
* Lookup dest by {svc,addr,port} in the destination trash.
diff --git a/net/ipv4/ipvs/ip_vs_sync.c b/net/ipv4/ipvs/ip_vs_sync.c
index 0d4d972..bd930ef 100644
--- a/net/ipv4/ipvs/ip_vs_sync.c
+++ b/net/ipv4/ipvs/ip_vs_sync.c
@@ -284,6 +284,7 @@
struct ip_vs_sync_conn_options *opt;
struct ip_vs_conn *cp;
struct ip_vs_protocol *pp;
+ struct ip_vs_dest *dest;
char *p;
int i;
@@ -317,20 +318,34 @@
s->caddr, s->cport,
s->vaddr, s->vport);
if (!cp) {
+ /*
+ * Find the appropriate destination for the connection.
+ * If it is not found the connection will remain unbound
+ * but still handled.
+ */
+ dest = ip_vs_find_dest(s->daddr, s->dport,
+ s->vaddr, s->vport,
+ s->protocol);
cp = ip_vs_conn_new(s->protocol,
s->caddr, s->cport,
s->vaddr, s->vport,
s->daddr, s->dport,
- flags, NULL);
+ flags, dest);
+ if (dest)
+ atomic_dec(&dest->refcnt);
if (!cp) {
IP_VS_ERR("ip_vs_conn_new failed\n");
return;
}
cp->state = ntohs(s->state);
} else if (!cp->dest) {
- /* it is an entry created by the synchronization */
- cp->state = ntohs(s->state);
- cp->flags = flags | IP_VS_CONN_F_HASHED;
+ dest = ip_vs_try_bind_dest(cp);
+ if (!dest) {
+ /* it is an unbound entry created by
+ * synchronization */
+ cp->flags = flags | IP_VS_CONN_F_HASHED;
+ } else
+ atomic_dec(&dest->refcnt);
} /* Note that we don't touch its state and flags
if it is a normal entry. */
@@ -342,6 +357,7 @@
p += SIMPLE_CONN_SIZE;
atomic_set(&cp->in_pkts, sysctl_ip_vs_sync_threshold[0]);
+ cp->state = ntohs(s->state);
pp = ip_vs_proto_get(s->protocol);
cp->timeout = pp->timeout_table[cp->state];
ip_vs_conn_put(cp);
diff --git a/net/ipv4/netfilter/Makefile b/net/ipv4/netfilter/Makefile
index 409d273..7456833 100644
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -41,27 +41,27 @@
obj-$(CONFIG_IP_NF_RAW) += iptable_raw.o
# matches
+obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ipt_addrtype.o
+obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o
+obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o
obj-$(CONFIG_IP_NF_MATCH_IPRANGE) += ipt_iprange.o
obj-$(CONFIG_IP_NF_MATCH_OWNER) += ipt_owner.o
-obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o
obj-$(CONFIG_IP_NF_MATCH_RECENT) += ipt_recent.o
-obj-$(CONFIG_IP_NF_MATCH_ECN) += ipt_ecn.o
-obj-$(CONFIG_IP_NF_MATCH_AH) += ipt_ah.o
+obj-$(CONFIG_IP_NF_MATCH_TOS) += ipt_tos.o
obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o
-obj-$(CONFIG_IP_NF_MATCH_ADDRTYPE) += ipt_addrtype.o
# targets
-obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o
-obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o
-obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
-obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
-obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
-obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
-obj-$(CONFIG_IP_NF_TARGET_SAME) += ipt_SAME.o
-obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
-obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o
obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
+obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
+obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
+obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
+obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
+obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
+obj-$(CONFIG_IP_NF_TARGET_REJECT) += ipt_REJECT.o
+obj-$(CONFIG_IP_NF_TARGET_SAME) += ipt_SAME.o
+obj-$(CONFIG_IP_NF_TARGET_TOS) += ipt_TOS.o
obj-$(CONFIG_IP_NF_TARGET_TTL) += ipt_TTL.o
+obj-$(CONFIG_IP_NF_TARGET_ULOG) += ipt_ULOG.o
# generic ARP tables
obj-$(CONFIG_IP_NF_ARPTABLES) += arp_tables.o
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index 10a2ce0..14d64a3 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -22,6 +22,7 @@
#include <linux/spinlock.h>
#include <linux/sysctl.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/security.h>
#include <linux/mutex.h>
#include <net/net_namespace.h>
@@ -607,15 +608,11 @@
{ .ctl_name = 0 }
};
-#ifdef CONFIG_PROC_FS
-static int
-ipq_get_info(char *buffer, char **start, off_t offset, int length)
+static int ip_queue_show(struct seq_file *m, void *v)
{
- int len;
-
read_lock_bh(&queue_lock);
- len = sprintf(buffer,
+ seq_printf(m,
"Peer PID : %d\n"
"Copy mode : %hu\n"
"Copy range : %u\n"
@@ -632,16 +629,21 @@
queue_user_dropped);
read_unlock_bh(&queue_lock);
-
- *start = buffer + offset;
- len -= offset;
- if (len > length)
- len = length;
- else if (len < 0)
- len = 0;
- return len;
+ return 0;
}
-#endif /* CONFIG_PROC_FS */
+
+static int ip_queue_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ip_queue_show, NULL);
+}
+
+static const struct file_operations ip_queue_proc_fops = {
+ .open = ip_queue_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
static struct nf_queue_handler nfqh = {
.name = "ip_queue",
@@ -661,10 +663,11 @@
goto cleanup_netlink_notifier;
}
- proc = proc_net_create(&init_net, IPQ_PROC_FS_NAME, 0, ipq_get_info);
- if (proc)
+ proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
+ if (proc) {
proc->owner = THIS_MODULE;
- else {
+ proc->proc_fops = &ip_queue_proc_fops;
+ } else {
printk(KERN_ERR "ip_queue: failed to create proc entry\n");
goto cleanup_ipqnl;
}
diff --git a/net/ipv4/netfilter/nf_nat_amanda.c b/net/ipv4/netfilter/nf_nat_amanda.c
index 35a5aa6..c31b876 100644
--- a/net/ipv4/netfilter/nf_nat_amanda.c
+++ b/net/ipv4/netfilter/nf_nat_amanda.c
@@ -69,7 +69,7 @@
static int __init nf_nat_amanda_init(void)
{
- BUG_ON(rcu_dereference(nf_nat_amanda_hook));
+ BUG_ON(nf_nat_amanda_hook != NULL);
rcu_assign_pointer(nf_nat_amanda_hook, help);
return 0;
}
diff --git a/net/ipv4/netfilter/nf_nat_ftp.c b/net/ipv4/netfilter/nf_nat_ftp.c
index e1a16d3..a1d5d58 100644
--- a/net/ipv4/netfilter/nf_nat_ftp.c
+++ b/net/ipv4/netfilter/nf_nat_ftp.c
@@ -147,7 +147,7 @@
static int __init nf_nat_ftp_init(void)
{
- BUG_ON(rcu_dereference(nf_nat_ftp_hook));
+ BUG_ON(nf_nat_ftp_hook != NULL);
rcu_assign_pointer(nf_nat_ftp_hook, nf_nat_ftp);
return 0;
}
diff --git a/net/ipv4/netfilter/nf_nat_h323.c b/net/ipv4/netfilter/nf_nat_h323.c
index a868c8c..93e18ef 100644
--- a/net/ipv4/netfilter/nf_nat_h323.c
+++ b/net/ipv4/netfilter/nf_nat_h323.c
@@ -544,15 +544,15 @@
/****************************************************************************/
static int __init init(void)
{
- BUG_ON(rcu_dereference(set_h245_addr_hook) != NULL);
- BUG_ON(rcu_dereference(set_h225_addr_hook) != NULL);
- BUG_ON(rcu_dereference(set_sig_addr_hook) != NULL);
- BUG_ON(rcu_dereference(set_ras_addr_hook) != NULL);
- BUG_ON(rcu_dereference(nat_rtp_rtcp_hook) != NULL);
- BUG_ON(rcu_dereference(nat_t120_hook) != NULL);
- BUG_ON(rcu_dereference(nat_h245_hook) != NULL);
- BUG_ON(rcu_dereference(nat_callforwarding_hook) != NULL);
- BUG_ON(rcu_dereference(nat_q931_hook) != NULL);
+ BUG_ON(set_h245_addr_hook != NULL);
+ BUG_ON(set_h225_addr_hook != NULL);
+ BUG_ON(set_sig_addr_hook != NULL);
+ BUG_ON(set_ras_addr_hook != NULL);
+ BUG_ON(nat_rtp_rtcp_hook != NULL);
+ BUG_ON(nat_t120_hook != NULL);
+ BUG_ON(nat_h245_hook != NULL);
+ BUG_ON(nat_callforwarding_hook != NULL);
+ BUG_ON(nat_q931_hook != NULL);
rcu_assign_pointer(set_h245_addr_hook, set_h245_addr);
rcu_assign_pointer(set_h225_addr_hook, set_h225_addr);
diff --git a/net/ipv4/netfilter/nf_nat_irc.c b/net/ipv4/netfilter/nf_nat_irc.c
index 766e2c1..fe6f9ce 100644
--- a/net/ipv4/netfilter/nf_nat_irc.c
+++ b/net/ipv4/netfilter/nf_nat_irc.c
@@ -74,7 +74,7 @@
static int __init nf_nat_irc_init(void)
{
- BUG_ON(rcu_dereference(nf_nat_irc_hook));
+ BUG_ON(nf_nat_irc_hook != NULL);
rcu_assign_pointer(nf_nat_irc_hook, help);
return 0;
}
diff --git a/net/ipv4/netfilter/nf_nat_pptp.c b/net/ipv4/netfilter/nf_nat_pptp.c
index e1385a0..6817e79 100644
--- a/net/ipv4/netfilter/nf_nat_pptp.c
+++ b/net/ipv4/netfilter/nf_nat_pptp.c
@@ -281,16 +281,16 @@
{
nf_nat_need_gre();
- BUG_ON(rcu_dereference(nf_nat_pptp_hook_outbound));
+ BUG_ON(nf_nat_pptp_hook_outbound != NULL);
rcu_assign_pointer(nf_nat_pptp_hook_outbound, pptp_outbound_pkt);
- BUG_ON(rcu_dereference(nf_nat_pptp_hook_inbound));
+ BUG_ON(nf_nat_pptp_hook_inbound != NULL);
rcu_assign_pointer(nf_nat_pptp_hook_inbound, pptp_inbound_pkt);
- BUG_ON(rcu_dereference(nf_nat_pptp_hook_exp_gre));
+ BUG_ON(nf_nat_pptp_hook_exp_gre != NULL);
rcu_assign_pointer(nf_nat_pptp_hook_exp_gre, pptp_exp_gre);
- BUG_ON(rcu_dereference(nf_nat_pptp_hook_expectfn));
+ BUG_ON(nf_nat_pptp_hook_expectfn != NULL);
rcu_assign_pointer(nf_nat_pptp_hook_expectfn, pptp_nat_expected);
return 0;
}
diff --git a/net/ipv4/netfilter/nf_nat_sip.c b/net/ipv4/netfilter/nf_nat_sip.c
index ce9edbc..3ca9897 100644
--- a/net/ipv4/netfilter/nf_nat_sip.c
+++ b/net/ipv4/netfilter/nf_nat_sip.c
@@ -293,8 +293,8 @@
static int __init nf_nat_sip_init(void)
{
- BUG_ON(rcu_dereference(nf_nat_sip_hook));
- BUG_ON(rcu_dereference(nf_nat_sdp_hook));
+ BUG_ON(nf_nat_sip_hook != NULL);
+ BUG_ON(nf_nat_sdp_hook != NULL);
rcu_assign_pointer(nf_nat_sip_hook, ip_nat_sip);
rcu_assign_pointer(nf_nat_sdp_hook, ip_nat_sdp);
return 0;
diff --git a/net/ipv4/netfilter/nf_nat_tftp.c b/net/ipv4/netfilter/nf_nat_tftp.c
index 0ecec70..1360a94 100644
--- a/net/ipv4/netfilter/nf_nat_tftp.c
+++ b/net/ipv4/netfilter/nf_nat_tftp.c
@@ -43,7 +43,7 @@
static int __init nf_nat_tftp_init(void)
{
- BUG_ON(rcu_dereference(nf_nat_tftp_hook));
+ BUG_ON(nf_nat_tftp_hook != NULL);
rcu_assign_pointer(nf_nat_tftp_hook, help);
return 0;
}
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index ffdccc0..ce34b28 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -46,17 +46,6 @@
#include <net/sock.h>
#include <net/raw.h>
-static int fold_prot_inuse(struct proto *proto)
-{
- int res = 0;
- int cpu;
-
- for_each_possible_cpu(cpu)
- res += proto->stats[cpu].inuse;
-
- return res;
-}
-
/*
* Report socket allocation statistics [mea@utu.fi]
*/
@@ -64,12 +53,12 @@
{
socket_seq_show(seq);
seq_printf(seq, "TCP: inuse %d orphan %d tw %d alloc %d mem %d\n",
- fold_prot_inuse(&tcp_prot), atomic_read(&tcp_orphan_count),
+ sock_prot_inuse(&tcp_prot), atomic_read(&tcp_orphan_count),
tcp_death_row.tw_count, atomic_read(&tcp_sockets_allocated),
atomic_read(&tcp_memory_allocated));
- seq_printf(seq, "UDP: inuse %d\n", fold_prot_inuse(&udp_prot));
- seq_printf(seq, "UDPLITE: inuse %d\n", fold_prot_inuse(&udplite_prot));
- seq_printf(seq, "RAW: inuse %d\n", fold_prot_inuse(&raw_prot));
+ seq_printf(seq, "UDP: inuse %d\n", sock_prot_inuse(&udp_prot));
+ seq_printf(seq, "UDPLITE: inuse %d\n", sock_prot_inuse(&udplite_prot));
+ seq_printf(seq, "RAW: inuse %d\n", sock_prot_inuse(&raw_prot));
seq_printf(seq, "FRAG: inuse %d memory %d\n",
ip_frag_nqueues(), ip_frag_mem());
return 0;
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 3916fac..66b42f5 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -760,6 +760,8 @@
}
}
+DEFINE_PROTO_INUSE(raw)
+
struct proto raw_prot = {
.name = "RAW",
.owner = THIS_MODULE,
@@ -781,6 +783,7 @@
.compat_setsockopt = compat_raw_setsockopt,
.compat_getsockopt = compat_raw_getsockopt,
#endif
+ REF_PROTO_INUSE(raw)
};
#ifdef CONFIG_PROC_FS
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index c64072b..8e65182 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2456,11 +2456,11 @@
thash_entries ? 0 : 512 * 1024);
tcp_hashinfo.ehash_size = 1 << tcp_hashinfo.ehash_size;
for (i = 0; i < tcp_hashinfo.ehash_size; i++) {
- rwlock_init(&tcp_hashinfo.ehash[i].lock);
INIT_HLIST_HEAD(&tcp_hashinfo.ehash[i].chain);
INIT_HLIST_HEAD(&tcp_hashinfo.ehash[i].twchain);
}
-
+ if (inet_ehash_locks_alloc(&tcp_hashinfo))
+ panic("TCP: failed to alloc ehash_locks");
tcp_hashinfo.bhash =
alloc_large_system_hash("TCP bind",
sizeof(struct inet_bind_hashbucket),
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index d438dfb..e566f3c 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2049,8 +2049,9 @@
struct sock *sk;
struct hlist_node *node;
struct inet_timewait_sock *tw;
+ rwlock_t *lock = inet_ehash_lockp(&tcp_hashinfo, st->bucket);
- read_lock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
+ read_lock_bh(lock);
sk_for_each(sk, node, &tcp_hashinfo.ehash[st->bucket].chain) {
if (sk->sk_family != st->family) {
continue;
@@ -2067,7 +2068,7 @@
rc = tw;
goto out;
}
- read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
+ read_unlock_bh(lock);
st->state = TCP_SEQ_STATE_ESTABLISHED;
}
out:
@@ -2094,11 +2095,11 @@
cur = tw;
goto out;
}
- read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
+ read_unlock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket));
st->state = TCP_SEQ_STATE_ESTABLISHED;
if (++st->bucket < tcp_hashinfo.ehash_size) {
- read_lock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
+ read_lock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket));
sk = sk_head(&tcp_hashinfo.ehash[st->bucket].chain);
} else {
cur = NULL;
@@ -2206,7 +2207,7 @@
case TCP_SEQ_STATE_TIME_WAIT:
case TCP_SEQ_STATE_ESTABLISHED:
if (v)
- read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
+ read_unlock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket));
break;
}
}
@@ -2417,6 +2418,8 @@
}
#endif /* CONFIG_PROC_FS */
+DEFINE_PROTO_INUSE(tcp)
+
struct proto tcp_prot = {
.name = "TCP",
.owner = THIS_MODULE,
@@ -2451,6 +2454,7 @@
.compat_setsockopt = compat_tcp_setsockopt,
.compat_getsockopt = compat_tcp_getsockopt,
#endif
+ REF_PROTO_INUSE(tcp)
};
void __init tcp_v4_init(struct net_proto_family *ops)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 4bc25b4..03c400c 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1430,6 +1430,8 @@
}
+DEFINE_PROTO_INUSE(udp)
+
struct proto udp_prot = {
.name = "UDP",
.owner = THIS_MODULE,
@@ -1452,6 +1454,7 @@
.compat_setsockopt = compat_udp_setsockopt,
.compat_getsockopt = compat_udp_getsockopt,
#endif
+ REF_PROTO_INUSE(udp)
};
/* ------------------------------------------------------------------------ */
diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c
index 9497720..f5baeb3 100644
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -44,6 +44,8 @@
.no_policy = 1,
};
+DEFINE_PROTO_INUSE(udplite)
+
struct proto udplite_prot = {
.name = "UDP-Lite",
.owner = THIS_MODULE,
@@ -67,6 +69,7 @@
.compat_setsockopt = compat_udp_setsockopt,
.compat_getsockopt = compat_udp_getsockopt,
#endif
+ REF_PROTO_INUSE(udplite)
};
static struct inet_protosw udplite4_protosw = {
diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c
index d6f1026..adc73ad 100644
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -37,9 +37,8 @@
} else {
unsigned int hash;
sk->sk_hash = hash = inet6_sk_ehashfn(sk);
- hash &= (hashinfo->ehash_size - 1);
- list = &hashinfo->ehash[hash].chain;
- lock = &hashinfo->ehash[hash].lock;
+ list = &inet_ehash_bucket(hashinfo, hash)->chain;
+ lock = inet_ehash_lockp(hashinfo, hash);
write_lock(lock);
}
@@ -70,9 +69,10 @@
*/
unsigned int hash = inet6_ehashfn(daddr, hnum, saddr, sport);
struct inet_ehash_bucket *head = inet_ehash_bucket(hashinfo, hash);
+ rwlock_t *lock = inet_ehash_lockp(hashinfo, hash);
prefetch(head->chain.first);
- read_lock(&head->lock);
+ read_lock(lock);
sk_for_each(sk, node, &head->chain) {
/* For IPV6 do the cheaper port and family tests first. */
if (INET6_MATCH(sk, hash, saddr, daddr, ports, dif))
@@ -92,12 +92,12 @@
goto hit;
}
}
- read_unlock(&head->lock);
+ read_unlock(lock);
return NULL;
hit:
sock_hold(sk);
- read_unlock(&head->lock);
+ read_unlock(lock);
return sk;
}
EXPORT_SYMBOL(__inet6_lookup_established);
@@ -175,12 +175,13 @@
const unsigned int hash = inet6_ehashfn(daddr, lport, saddr,
inet->dport);
struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash);
+ rwlock_t *lock = inet_ehash_lockp(hinfo, hash);
struct sock *sk2;
const struct hlist_node *node;
struct inet_timewait_sock *tw;
prefetch(head->chain.first);
- write_lock(&head->lock);
+ write_lock(lock);
/* Check TIME-WAIT sockets first. */
sk_for_each(sk2, node, &head->twchain) {
@@ -216,7 +217,7 @@
__sk_add_node(sk, &head->chain);
sk->sk_hash = hash;
sock_prot_inc_use(sk->sk_prot);
- write_unlock(&head->lock);
+ write_unlock(lock);
if (twp != NULL) {
*twp = tw;
@@ -231,7 +232,7 @@
return 0;
not_unique:
- write_unlock(&head->lock);
+ write_unlock(lock);
return -EADDRNOTAVAIL;
}
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 653fc0a..86e1835 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1339,6 +1339,19 @@
return err;
}
+static void ip6_cork_release(struct inet_sock *inet, struct ipv6_pinfo *np)
+{
+ inet->cork.flags &= ~IPCORK_OPT;
+ kfree(np->cork.opt);
+ np->cork.opt = NULL;
+ if (np->cork.rt) {
+ dst_release(&np->cork.rt->u.dst);
+ np->cork.rt = NULL;
+ inet->cork.flags &= ~IPCORK_ALLFRAG;
+ }
+ memset(&inet->cork.fl, 0, sizeof(inet->cork.fl));
+}
+
int ip6_push_pending_frames(struct sock *sk)
{
struct sk_buff *skb, *tmp_skb;
@@ -1415,15 +1428,7 @@
}
out:
- inet->cork.flags &= ~IPCORK_OPT;
- kfree(np->cork.opt);
- np->cork.opt = NULL;
- if (np->cork.rt) {
- dst_release(&np->cork.rt->u.dst);
- np->cork.rt = NULL;
- inet->cork.flags &= ~IPCORK_ALLFRAG;
- }
- memset(&inet->cork.fl, 0, sizeof(inet->cork.fl));
+ ip6_cork_release(inet, np);
return err;
error:
goto out;
@@ -1431,8 +1436,6 @@
void ip6_flush_pending_frames(struct sock *sk)
{
- struct inet_sock *inet = inet_sk(sk);
- struct ipv6_pinfo *np = inet6_sk(sk);
struct sk_buff *skb;
while ((skb = __skb_dequeue_tail(&sk->sk_write_queue)) != NULL) {
@@ -1442,14 +1445,5 @@
kfree_skb(skb);
}
- inet->cork.flags &= ~IPCORK_OPT;
-
- kfree(np->cork.opt);
- np->cork.opt = NULL;
- if (np->cork.rt) {
- dst_release(&np->cork.rt->u.dst);
- np->cork.rt = NULL;
- inet->cork.flags &= ~IPCORK_ALLFRAG;
- }
- memset(&inet->cork.fl, 0, sizeof(inet->cork.fl));
+ ip6_cork_release(inet_sk(sk), inet6_sk(sk));
}
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 85eb479..0cd4056 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -36,6 +36,7 @@
#include <net/ipcomp.h>
#include <asm/semaphore.h>
#include <linux/crypto.h>
+#include <linux/err.h>
#include <linux/pfkeyv2.h>
#include <linux/random.h>
#include <linux/percpu.h>
@@ -358,7 +359,7 @@
for_each_possible_cpu(cpu) {
struct crypto_comp *tfm = crypto_alloc_comp(alg_name, 0,
CRYPTO_ALG_ASYNC);
- if (!tfm)
+ if (IS_ERR(tfm))
goto error;
*per_cpu_ptr(tfms, cpu) = tfm;
}
diff --git a/net/ipv6/netfilter/Makefile b/net/ipv6/netfilter/Makefile
index 4513eab..e789ec4 100644
--- a/net/ipv6/netfilter/Makefile
+++ b/net/ipv6/netfilter/Makefile
@@ -4,25 +4,29 @@
# Link order matters here.
obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
-obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o
-obj-$(CONFIG_IP6_NF_MATCH_OPTS) += ip6t_hbh.o
-obj-$(CONFIG_IP6_NF_MATCH_IPV6HEADER) += ip6t_ipv6header.o
-obj-$(CONFIG_IP6_NF_MATCH_FRAG) += ip6t_frag.o
-obj-$(CONFIG_IP6_NF_MATCH_AH) += ip6t_ah.o
-obj-$(CONFIG_IP6_NF_MATCH_EUI64) += ip6t_eui64.o
-obj-$(CONFIG_IP6_NF_MATCH_OWNER) += ip6t_owner.o
obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
-obj-$(CONFIG_IP6_NF_TARGET_HL) += ip6t_HL.o
obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o
-obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o
obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o
-obj-$(CONFIG_IP6_NF_MATCH_HL) += ip6t_hl.o
-obj-$(CONFIG_IP6_NF_TARGET_REJECT) += ip6t_REJECT.o
-obj-$(CONFIG_IP6_NF_MATCH_MH) += ip6t_mh.o
# objects for l3 independent conntrack
nf_conntrack_ipv6-objs := nf_conntrack_l3proto_ipv6.o nf_conntrack_proto_icmpv6.o nf_conntrack_reasm.o
# l3 independent conntrack
obj-$(CONFIG_NF_CONNTRACK_IPV6) += nf_conntrack_ipv6.o
+
+# matches
+obj-$(CONFIG_IP6_NF_MATCH_AH) += ip6t_ah.o
+obj-$(CONFIG_IP6_NF_MATCH_EUI64) += ip6t_eui64.o
+obj-$(CONFIG_IP6_NF_MATCH_FRAG) += ip6t_frag.o
+obj-$(CONFIG_IP6_NF_MATCH_HL) += ip6t_hl.o
+obj-$(CONFIG_IP6_NF_MATCH_IPV6HEADER) += ip6t_ipv6header.o
+obj-$(CONFIG_IP6_NF_MATCH_MH) += ip6t_mh.o
+obj-$(CONFIG_IP6_NF_MATCH_OPTS) += ip6t_hbh.o
+obj-$(CONFIG_IP6_NF_MATCH_OWNER) += ip6t_owner.o
+obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o
+
+# targets
+obj-$(CONFIG_IP6_NF_TARGET_HL) += ip6t_HL.o
+obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o
+obj-$(CONFIG_IP6_NF_TARGET_REJECT) += ip6t_REJECT.o
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index 6413a30..e273605 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -23,6 +23,7 @@
#include <linux/spinlock.h>
#include <linux/sysctl.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/mutex.h>
#include <net/net_namespace.h>
#include <net/sock.h>
@@ -596,15 +597,11 @@
{ .ctl_name = 0 }
};
-#ifdef CONFIG_PROC_FS
-static int
-ipq_get_info(char *buffer, char **start, off_t offset, int length)
+static int ip6_queue_show(struct seq_file *m, void *v)
{
- int len;
-
read_lock_bh(&queue_lock);
- len = sprintf(buffer,
+ seq_printf(m,
"Peer PID : %d\n"
"Copy mode : %hu\n"
"Copy range : %u\n"
@@ -621,16 +618,21 @@
queue_user_dropped);
read_unlock_bh(&queue_lock);
-
- *start = buffer + offset;
- len -= offset;
- if (len > length)
- len = length;
- else if (len < 0)
- len = 0;
- return len;
+ return 0;
}
-#endif /* CONFIG_PROC_FS */
+
+static int ip6_queue_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ip6_queue_show, NULL);
+}
+
+static const struct file_operations ip6_queue_proc_fops = {
+ .open = ip6_queue_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
static struct nf_queue_handler nfqh = {
.name = "ip6_queue",
@@ -650,10 +652,11 @@
goto cleanup_netlink_notifier;
}
- proc = proc_net_create(&init_net, IPQ_PROC_FS_NAME, 0, ipq_get_info);
- if (proc)
+ proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
+ if (proc) {
proc->owner = THIS_MODULE;
- else {
+ proc->proc_fops = &ip6_queue_proc_fops;
+ } else {
printk(KERN_ERR "ip6_queue: failed to create proc entry\n");
goto cleanup_ipqnl;
}
diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c
index be526ad..8631ed7 100644
--- a/net/ipv6/proc.c
+++ b/net/ipv6/proc.c
@@ -32,27 +32,16 @@
static struct proc_dir_entry *proc_net_devsnmp6;
-static int fold_prot_inuse(struct proto *proto)
-{
- int res = 0;
- int cpu;
-
- for_each_possible_cpu(cpu)
- res += proto->stats[cpu].inuse;
-
- return res;
-}
-
static int sockstat6_seq_show(struct seq_file *seq, void *v)
{
seq_printf(seq, "TCP6: inuse %d\n",
- fold_prot_inuse(&tcpv6_prot));
+ sock_prot_inuse(&tcpv6_prot));
seq_printf(seq, "UDP6: inuse %d\n",
- fold_prot_inuse(&udpv6_prot));
+ sock_prot_inuse(&udpv6_prot));
seq_printf(seq, "UDPLITE6: inuse %d\n",
- fold_prot_inuse(&udplitev6_prot));
+ sock_prot_inuse(&udplitev6_prot));
seq_printf(seq, "RAW6: inuse %d\n",
- fold_prot_inuse(&rawv6_prot));
+ sock_prot_inuse(&rawv6_prot));
seq_printf(seq, "FRAG6: inuse %d memory %d\n",
ip6_frag_nqueues(), ip6_frag_mem());
return 0;
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index ca24ef1..807260d 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -1144,6 +1144,8 @@
return(0);
}
+DEFINE_PROTO_INUSE(rawv6)
+
struct proto rawv6_prot = {
.name = "RAWv6",
.owner = THIS_MODULE,
@@ -1166,6 +1168,7 @@
.compat_setsockopt = compat_rawv6_setsockopt,
.compat_getsockopt = compat_rawv6_getsockopt,
#endif
+ REF_PROTO_INUSE(rawv6)
};
#ifdef CONFIG_PROC_FS
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 95f8e4a..973a97a 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -38,12 +38,8 @@
#include <linux/in6.h>
#include <linux/init.h>
#include <linux/if_arp.h>
-
-#ifdef CONFIG_PROC_FS
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#endif
-
#include <net/net_namespace.h>
#include <net/snmp.h>
#include <net/ipv6.h>
@@ -2288,71 +2284,50 @@
static int rt6_info_route(struct rt6_info *rt, void *p_arg)
{
- struct rt6_proc_arg *arg = (struct rt6_proc_arg *) p_arg;
+ struct seq_file *m = p_arg;
- if (arg->skip < arg->offset / RT6_INFO_LEN) {
- arg->skip++;
- return 0;
- }
-
- if (arg->len >= arg->length)
- return 0;
-
- arg->len += sprintf(arg->buffer + arg->len,
- NIP6_SEQFMT " %02x ",
- NIP6(rt->rt6i_dst.addr),
- rt->rt6i_dst.plen);
+ seq_printf(m, NIP6_SEQFMT " %02x ", NIP6(rt->rt6i_dst.addr),
+ rt->rt6i_dst.plen);
#ifdef CONFIG_IPV6_SUBTREES
- arg->len += sprintf(arg->buffer + arg->len,
- NIP6_SEQFMT " %02x ",
- NIP6(rt->rt6i_src.addr),
- rt->rt6i_src.plen);
+ seq_printf(m, NIP6_SEQFMT " %02x ", NIP6(rt->rt6i_src.addr),
+ rt->rt6i_src.plen);
#else
- arg->len += sprintf(arg->buffer + arg->len,
- "00000000000000000000000000000000 00 ");
+ seq_puts(m, "00000000000000000000000000000000 00 ");
#endif
if (rt->rt6i_nexthop) {
- arg->len += sprintf(arg->buffer + arg->len,
- NIP6_SEQFMT,
- NIP6(*((struct in6_addr *)rt->rt6i_nexthop->primary_key)));
+ seq_printf(m, NIP6_SEQFMT,
+ NIP6(*((struct in6_addr *)rt->rt6i_nexthop->primary_key)));
} else {
- arg->len += sprintf(arg->buffer + arg->len,
- "00000000000000000000000000000000");
+ seq_puts(m, "00000000000000000000000000000000");
}
- arg->len += sprintf(arg->buffer + arg->len,
- " %08x %08x %08x %08x %8s\n",
- rt->rt6i_metric, atomic_read(&rt->u.dst.__refcnt),
- rt->u.dst.__use, rt->rt6i_flags,
- rt->rt6i_dev ? rt->rt6i_dev->name : "");
+ seq_printf(m, " %08x %08x %08x %08x %8s\n",
+ rt->rt6i_metric, atomic_read(&rt->u.dst.__refcnt),
+ rt->u.dst.__use, rt->rt6i_flags,
+ rt->rt6i_dev ? rt->rt6i_dev->name : "");
return 0;
}
-static int rt6_proc_info(char *buffer, char **start, off_t offset, int length)
+static int ipv6_route_show(struct seq_file *m, void *v)
{
- struct rt6_proc_arg arg = {
- .buffer = buffer,
- .offset = offset,
- .length = length,
- };
-
- fib6_clean_all(rt6_info_route, 0, &arg);
-
- *start = buffer;
- if (offset)
- *start += offset % RT6_INFO_LEN;
-
- arg.len -= offset % RT6_INFO_LEN;
-
- if (arg.len > length)
- arg.len = length;
- if (arg.len < 0)
- arg.len = 0;
-
- return arg.len;
+ fib6_clean_all(rt6_info_route, 0, m);
+ return 0;
}
+static int ipv6_route_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ipv6_route_show, NULL);
+}
+
+static const struct file_operations ipv6_route_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = ipv6_route_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
static int rt6_stats_seq_show(struct seq_file *seq, void *v)
{
seq_printf(seq, "%04x %04x %04x %04x %04x %04x %04x\n",
@@ -2489,22 +2464,14 @@
void __init ip6_route_init(void)
{
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *p;
-#endif
ip6_dst_ops.kmem_cachep =
kmem_cache_create("ip6_dst_cache", sizeof(struct rt6_info), 0,
SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL);
ip6_dst_blackhole_ops.kmem_cachep = ip6_dst_ops.kmem_cachep;
fib6_init();
-#ifdef CONFIG_PROC_FS
- p = proc_net_create(&init_net, "ipv6_route", 0, rt6_proc_info);
- if (p)
- p->owner = THIS_MODULE;
-
+ proc_net_fops_create(&init_net, "ipv6_route", 0, &ipv6_route_proc_fops);
proc_net_fops_create(&init_net, "rt6_stats", S_IRUGO, &rt6_stats_seq_fops);
-#endif
#ifdef CONFIG_XFRM
xfrm6_init();
#endif
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 06be2a1..3aad861 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -2107,6 +2107,8 @@
}
#endif
+DEFINE_PROTO_INUSE(tcpv6)
+
struct proto tcpv6_prot = {
.name = "TCPv6",
.owner = THIS_MODULE,
@@ -2141,6 +2143,7 @@
.compat_setsockopt = compat_tcp_setsockopt,
.compat_getsockopt = compat_tcp_getsockopt,
#endif
+ REF_PROTO_INUSE(tcpv6)
};
static struct inet6_protocol tcpv6_protocol = {
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index caebad6..ee1cc3f 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -205,12 +205,11 @@
return err;
csum_copy_err:
+ UDP6_INC_STATS_USER(UDP_MIB_INERRORS, is_udplite);
skb_kill_datagram(sk, skb, flags);
- if (flags & MSG_DONTWAIT) {
- UDP6_INC_STATS_USER(UDP_MIB_INERRORS, is_udplite);
+ if (flags & MSG_DONTWAIT)
return -EAGAIN;
- }
goto try_again;
}
@@ -971,6 +970,8 @@
/* ------------------------------------------------------------------------ */
+DEFINE_PROTO_INUSE(udpv6)
+
struct proto udpv6_prot = {
.name = "UDPv6",
.owner = THIS_MODULE,
@@ -992,6 +993,7 @@
.compat_setsockopt = compat_udpv6_setsockopt,
.compat_getsockopt = compat_udpv6_getsockopt,
#endif
+ REF_PROTO_INUSE(udpv6)
};
static struct inet_protosw udpv6_protosw = {
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index 766566f..5a0379f 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -40,6 +40,8 @@
return udplite_get_port(sk, snum, ipv6_rcv_saddr_equal);
}
+DEFINE_PROTO_INUSE(udplitev6)
+
struct proto udplitev6_prot = {
.name = "UDPLITEv6",
.owner = THIS_MODULE,
@@ -62,6 +64,7 @@
.compat_setsockopt = compat_udpv6_setsockopt,
.compat_getsockopt = compat_udpv6_getsockopt,
#endif
+ REF_PROTO_INUSE(udplitev6)
};
static struct inet_protosw udplite6_protosw = {
diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile
index 93c58f9..ad0e36e 100644
--- a/net/netfilter/Makefile
+++ b/net/netfilter/Makefile
@@ -40,15 +40,15 @@
# targets
obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIFY) += xt_CLASSIFY.o
obj-$(CONFIG_NETFILTER_XT_TARGET_CONNMARK) += xt_CONNMARK.o
+obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
obj-$(CONFIG_NETFILTER_XT_TARGET_MARK) += xt_MARK.o
-obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o
obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
+obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o
obj-$(CONFIG_NETFILTER_XT_TARGET_NOTRACK) += xt_NOTRACK.o
-obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o
obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK) += xt_SECMARK.o
obj-$(CONFIG_NETFILTER_XT_TARGET_TCPMSS) += xt_TCPMSS.o
-obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
+obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o
# matches
obj-$(CONFIG_NETFILTER_XT_MATCH_COMMENT) += xt_comment.o
@@ -59,22 +59,22 @@
obj-$(CONFIG_NETFILTER_XT_MATCH_DCCP) += xt_dccp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_DSCP) += xt_dscp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_ESP) += xt_esp.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_HASHLIMIT) += xt_hashlimit.o
obj-$(CONFIG_NETFILTER_XT_MATCH_HELPER) += xt_helper.o
obj-$(CONFIG_NETFILTER_XT_MATCH_LENGTH) += xt_length.o
obj-$(CONFIG_NETFILTER_XT_MATCH_LIMIT) += xt_limit.o
obj-$(CONFIG_NETFILTER_XT_MATCH_MAC) += xt_mac.o
obj-$(CONFIG_NETFILTER_XT_MATCH_MARK) += xt_mark.o
obj-$(CONFIG_NETFILTER_XT_MATCH_MULTIPORT) += xt_multiport.o
-obj-$(CONFIG_NETFILTER_XT_MATCH_POLICY) += xt_policy.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o
obj-$(CONFIG_NETFILTER_XT_MATCH_PKTTYPE) += xt_pkttype.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_POLICY) += xt_policy.o
obj-$(CONFIG_NETFILTER_XT_MATCH_QUOTA) += xt_quota.o
obj-$(CONFIG_NETFILTER_XT_MATCH_REALM) += xt_realm.o
obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
-obj-$(CONFIG_NETFILTER_XT_MATCH_TIME) += xt_time.o
obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
-obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_TIME) += xt_time.o
obj-$(CONFIG_NETFILTER_XT_MATCH_U32) += xt_u32.o
-obj-$(CONFIG_NETFILTER_XT_MATCH_HASHLIMIT) += xt_hashlimit.o
diff --git a/net/netfilter/nf_sockopt.c b/net/netfilter/nf_sockopt.c
index aa28315..2dfac32 100644
--- a/net/netfilter/nf_sockopt.c
+++ b/net/netfilter/nf_sockopt.c
@@ -23,14 +23,13 @@
/* Functions to register sockopt ranges (exclusive). */
int nf_register_sockopt(struct nf_sockopt_ops *reg)
{
- struct list_head *i;
+ struct nf_sockopt_ops *ops;
int ret = 0;
if (mutex_lock_interruptible(&nf_sockopt_mutex) != 0)
return -EINTR;
- list_for_each(i, &nf_sockopts) {
- struct nf_sockopt_ops *ops = (struct nf_sockopt_ops *)i;
+ list_for_each_entry(ops, &nf_sockopts, list) {
if (ops->pf == reg->pf
&& (overlap(ops->set_optmin, ops->set_optmax,
reg->set_optmin, reg->set_optmax)
@@ -65,7 +64,6 @@
static int nf_sockopt(struct sock *sk, int pf, int val,
char __user *opt, int *len, int get)
{
- struct list_head *i;
struct nf_sockopt_ops *ops;
int ret;
@@ -75,8 +73,7 @@
if (mutex_lock_interruptible(&nf_sockopt_mutex) != 0)
return -EINTR;
- list_for_each(i, &nf_sockopts) {
- ops = (struct nf_sockopt_ops *)i;
+ list_for_each_entry(ops, &nf_sockopts, list) {
if (ops->pf == pf) {
if (!try_module_get(ops->owner))
goto out_nosup;
@@ -124,7 +121,6 @@
static int compat_nf_sockopt(struct sock *sk, int pf, int val,
char __user *opt, int *len, int get)
{
- struct list_head *i;
struct nf_sockopt_ops *ops;
int ret;
@@ -135,8 +131,7 @@
if (mutex_lock_interruptible(&nf_sockopt_mutex) != 0)
return -EINTR;
- list_for_each(i, &nf_sockopts) {
- ops = (struct nf_sockopt_ops *)i;
+ list_for_each_entry(ops, &nf_sockopts, list) {
if (ops->pf == pf) {
if (!try_module_get(ops->owner))
goto out_nosup;
diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c
index 06cff1d..d7becf0 100644
--- a/net/netfilter/xt_connlimit.c
+++ b/net/netfilter/xt_connlimit.c
@@ -4,7 +4,8 @@
* (c) 2000 Gerd Knorr <kraxel@bytesex.org>
* Nov 2002: Martin Bene <martin.bene@icomedias.com>:
* only ignore TIME_WAIT or gone connections
- * Copyright © Jan Engelhardt <jengelh@gmx.de>, 2007
+ * (C) CC Computer Consultants GmbH, 2007
+ * Contact: <jengelh@computergmbh.de>
*
* based on ...
*
@@ -306,7 +307,7 @@
module_init(xt_connlimit_init);
module_exit(xt_connlimit_exit);
-MODULE_AUTHOR("Jan Engelhardt <jengelh@gmx.de>");
+MODULE_AUTHOR("Jan Engelhardt <jengelh@computergmbh.de>");
MODULE_DESCRIPTION("netfilter xt_connlimit match module");
MODULE_LICENSE("GPL");
MODULE_ALIAS("ipt_connlimit");
diff --git a/net/netfilter/xt_time.c b/net/netfilter/xt_time.c
index ef48bbd..ff44f86 100644
--- a/net/netfilter/xt_time.c
+++ b/net/netfilter/xt_time.c
@@ -1,6 +1,7 @@
/*
* xt_time
- * Copyright © Jan Engelhardt <jengelh@computergmbh.de>, 2007
+ * Copyright © CC Computer Consultants GmbH, 2007
+ * Contact: <jengelh@computergmbh.de>
*
* based on ipt_time by Fabrice MARIE <fabrice@netfilter.org>
* This is a module which is used for time matching
diff --git a/net/netfilter/xt_u32.c b/net/netfilter/xt_u32.c
index bec4279..af75b8c 100644
--- a/net/netfilter/xt_u32.c
+++ b/net/netfilter/xt_u32.c
@@ -2,7 +2,8 @@
* xt_u32 - kernel module to match u32 packet content
*
* Original author: Don Cohen <don@isis.cs3-inc.com>
- * © Jan Engelhardt <jengelh@gmx.de>, 2007
+ * (C) CC Computer Consultants GmbH, 2007
+ * Contact: <jengelh@computergmbh.de>
*/
#include <linux/module.h>
@@ -129,7 +130,7 @@
module_init(xt_u32_init);
module_exit(xt_u32_exit);
-MODULE_AUTHOR("Jan Engelhardt <jengelh@gmx.de>");
+MODULE_AUTHOR("Jan Engelhardt <jengelh@computergmbh.de>");
MODULE_DESCRIPTION("netfilter u32 match module");
MODULE_LICENSE("GPL");
MODULE_ALIAS("ipt_u32");
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 2601712..415c972 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -752,7 +752,7 @@
* 1: repeat lookup - reference dropped while waiting for socket memory.
*/
int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock,
- long timeo, struct sock *ssk)
+ long *timeo, struct sock *ssk)
{
struct netlink_sock *nlk;
@@ -761,7 +761,7 @@
if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf ||
test_bit(0, &nlk->state)) {
DECLARE_WAITQUEUE(wait, current);
- if (!timeo) {
+ if (!*timeo) {
if (!ssk || netlink_is_kernel(ssk))
netlink_overrun(sk);
sock_put(sk);
@@ -775,7 +775,7 @@
if ((atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf ||
test_bit(0, &nlk->state)) &&
!sock_flag(sk, SOCK_DEAD))
- timeo = schedule_timeout(timeo);
+ *timeo = schedule_timeout(*timeo);
__set_current_state(TASK_RUNNING);
remove_wait_queue(&nlk->wait, &wait);
@@ -783,7 +783,7 @@
if (signal_pending(current)) {
kfree_skb(skb);
- return sock_intr_errno(timeo);
+ return sock_intr_errno(*timeo);
}
return 1;
}
@@ -877,7 +877,7 @@
if (netlink_is_kernel(sk))
return netlink_unicast_kernel(sk, skb);
- err = netlink_attachskb(sk, skb, nonblock, timeo, ssk);
+ err = netlink_attachskb(sk, skb, nonblock, &timeo, ssk);
if (err == 1)
goto retry;
if (err)
diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index 9e98c6e..5317102 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -91,7 +91,7 @@
static __inline__ unsigned u32_hash_fold(u32 key, struct tc_u32_sel *sel, u8 fshift)
{
- unsigned h = (key & sel->hmask)>>fshift;
+ unsigned h = ntohl(key & sel->hmask)>>fshift;
return h;
}
@@ -615,7 +615,7 @@
n->handle = handle;
{
u8 i = 0;
- u32 mask = s->hmask;
+ u32 mask = ntohl(s->hmask);
if (mask) {
while (!(mask & 1)) {
i++;
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 421281d..c0ed06d 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -252,6 +252,9 @@
static inline int teql_resolve(struct sk_buff *skb,
struct sk_buff *skb_res, struct net_device *dev)
{
+ if (dev->qdisc == &noop_qdisc)
+ return -ENODEV;
+
if (dev->header_ops == NULL ||
skb->dst == NULL ||
skb->dst->neighbour == NULL)
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index bd6f42a..a7ecf31 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -6455,6 +6455,8 @@
}
+DEFINE_PROTO_INUSE(sctp)
+
/* This proto struct describes the ULP interface for SCTP. */
struct proto sctp_prot = {
.name = "SCTP",
@@ -6483,9 +6485,12 @@
.memory_pressure = &sctp_memory_pressure,
.enter_memory_pressure = sctp_enter_memory_pressure,
.memory_allocated = &sctp_memory_allocated,
+ REF_PROTO_INUSE(sctp)
};
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+DEFINE_PROTO_INUSE(sctpv6)
+
struct proto sctpv6_prot = {
.name = "SCTPv6",
.owner = THIS_MODULE,
@@ -6513,5 +6518,6 @@
.memory_pressure = &sctp_memory_pressure,
.enter_memory_pressure = sctp_enter_memory_pressure,
.memory_allocated = &sctp_memory_allocated,
+ REF_PROTO_INUSE(sctpv6)
};
#endif /* defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) */
diff --git a/security/selinux/ss/avtab.c b/security/selinux/ss/avtab.c
index 7551af1..9e70a16 100644
--- a/security/selinux/ss/avtab.c
+++ b/security/selinux/ss/avtab.c
@@ -325,7 +325,7 @@
AVTAB_MEMBER
};
-int avtab_read_item(void *fp, u32 vers, struct avtab *a,
+int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol,
int (*insertf)(struct avtab *a, struct avtab_key *k,
struct avtab_datum *d, void *p),
void *p)
@@ -333,10 +333,11 @@
__le16 buf16[4];
u16 enabled;
__le32 buf32[7];
- u32 items, items2, val;
+ u32 items, items2, val, vers = pol->policyvers;
struct avtab_key key;
struct avtab_datum datum;
int i, rc;
+ unsigned set;
memset(&key, 0, sizeof(struct avtab_key));
memset(&datum, 0, sizeof(struct avtab_datum));
@@ -420,12 +421,35 @@
key.target_class = le16_to_cpu(buf16[items++]);
key.specified = le16_to_cpu(buf16[items++]);
+ if (!policydb_type_isvalid(pol, key.source_type) ||
+ !policydb_type_isvalid(pol, key.target_type) ||
+ !policydb_class_isvalid(pol, key.target_class)) {
+ printk(KERN_WARNING "security: avtab: invalid type or class\n");
+ return -1;
+ }
+
+ set = 0;
+ for (i = 0; i < ARRAY_SIZE(spec_order); i++) {
+ if (key.specified & spec_order[i])
+ set++;
+ }
+ if (!set || set > 1) {
+ printk(KERN_WARNING
+ "security: avtab: more than one specifier\n");
+ return -1;
+ }
+
rc = next_entry(buf32, fp, sizeof(u32));
if (rc < 0) {
printk("security: avtab: truncated entry\n");
return -1;
}
datum.data = le32_to_cpu(*buf32);
+ if ((key.specified & AVTAB_TYPE) &&
+ !policydb_type_isvalid(pol, datum.data)) {
+ printk(KERN_WARNING "security: avtab: invalid type\n");
+ return -1;
+ }
return insertf(a, &key, &datum, p);
}
@@ -435,7 +459,7 @@
return avtab_insert(a, k, d);
}
-int avtab_read(struct avtab *a, void *fp, u32 vers)
+int avtab_read(struct avtab *a, void *fp, struct policydb *pol)
{
int rc;
__le32 buf[1];
@@ -459,7 +483,7 @@
goto bad;
for (i = 0; i < nel; i++) {
- rc = avtab_read_item(fp,vers, a, avtab_insertf, NULL);
+ rc = avtab_read_item(a, fp, pol, avtab_insertf, NULL);
if (rc) {
if (rc == -ENOMEM)
printk(KERN_ERR "security: avtab: out of memory\n");
diff --git a/security/selinux/ss/avtab.h b/security/selinux/ss/avtab.h
index d8edf8c..8da6a84 100644
--- a/security/selinux/ss/avtab.h
+++ b/security/selinux/ss/avtab.h
@@ -64,12 +64,13 @@
void avtab_destroy(struct avtab *h);
void avtab_hash_eval(struct avtab *h, char *tag);
-int avtab_read_item(void *fp, uint32_t vers, struct avtab *a,
+struct policydb;
+int avtab_read_item(struct avtab *a, void *fp, struct policydb *pol,
int (*insert)(struct avtab *a, struct avtab_key *k,
struct avtab_datum *d, void *p),
void *p);
-int avtab_read(struct avtab *a, void *fp, u32 vers);
+int avtab_read(struct avtab *a, void *fp, struct policydb *pol);
struct avtab_node *avtab_insert_nonunique(struct avtab *h, struct avtab_key *key,
struct avtab_datum *datum);
diff --git a/security/selinux/ss/conditional.c b/security/selinux/ss/conditional.c
index 45b93a8..50ad85d 100644
--- a/security/selinux/ss/conditional.c
+++ b/security/selinux/ss/conditional.c
@@ -362,7 +362,8 @@
data.head = NULL;
data.tail = NULL;
for (i = 0; i < len; i++) {
- rc = avtab_read_item(fp, p->policyvers, &p->te_cond_avtab, cond_insertf, &data);
+ rc = avtab_read_item(&p->te_cond_avtab, fp, p, cond_insertf,
+ &data);
if (rc)
return rc;
diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c
index c1a6b22..920b5e3 100644
--- a/security/selinux/ss/ebitmap.c
+++ b/security/selinux/ss/ebitmap.c
@@ -129,8 +129,8 @@
cmap_sft = delta % NETLBL_CATMAP_MAPSIZE;
c_iter->bitmap[cmap_idx]
|= e_iter->maps[cmap_idx] << cmap_sft;
- e_iter = e_iter->next;
}
+ e_iter = e_iter->next;
}
return 0;
diff --git a/security/selinux/ss/mls.c b/security/selinux/ss/mls.c
index 9a11dea..fb5d70a 100644
--- a/security/selinux/ss/mls.c
+++ b/security/selinux/ss/mls.c
@@ -157,49 +157,55 @@
return;
}
+int mls_level_isvalid(struct policydb *p, struct mls_level *l)
+{
+ struct level_datum *levdatum;
+ struct ebitmap_node *node;
+ int i;
+
+ if (!l->sens || l->sens > p->p_levels.nprim)
+ return 0;
+ levdatum = hashtab_search(p->p_levels.table,
+ p->p_sens_val_to_name[l->sens - 1]);
+ if (!levdatum)
+ return 0;
+
+ ebitmap_for_each_positive_bit(&l->cat, node, i) {
+ if (i > p->p_cats.nprim)
+ return 0;
+ if (!ebitmap_get_bit(&levdatum->level->cat, i)) {
+ /*
+ * Category may not be associated with
+ * sensitivity.
+ */
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+int mls_range_isvalid(struct policydb *p, struct mls_range *r)
+{
+ return (mls_level_isvalid(p, &r->level[0]) &&
+ mls_level_isvalid(p, &r->level[1]) &&
+ mls_level_dom(&r->level[1], &r->level[0]));
+}
+
/*
* Return 1 if the MLS fields in the security context
* structure `c' are valid. Return 0 otherwise.
*/
int mls_context_isvalid(struct policydb *p, struct context *c)
{
- struct level_datum *levdatum;
struct user_datum *usrdatum;
- struct ebitmap_node *node;
- int i, l;
if (!selinux_mls_enabled)
return 1;
- /*
- * MLS range validity checks: high must dominate low, low level must
- * be valid (category set <-> sensitivity check), and high level must
- * be valid (category set <-> sensitivity check)
- */
- if (!mls_level_dom(&c->range.level[1], &c->range.level[0]))
- /* High does not dominate low. */
+ if (!mls_range_isvalid(p, &c->range))
return 0;
- for (l = 0; l < 2; l++) {
- if (!c->range.level[l].sens || c->range.level[l].sens > p->p_levels.nprim)
- return 0;
- levdatum = hashtab_search(p->p_levels.table,
- p->p_sens_val_to_name[c->range.level[l].sens - 1]);
- if (!levdatum)
- return 0;
-
- ebitmap_for_each_positive_bit(&c->range.level[l].cat, node, i) {
- if (i > p->p_cats.nprim)
- return 0;
- if (!ebitmap_get_bit(&levdatum->level->cat, i))
- /*
- * Category may not be associated with
- * sensitivity in low level.
- */
- return 0;
- }
- }
-
if (c->role == OBJECT_R_VAL)
return 1;
diff --git a/security/selinux/ss/mls.h b/security/selinux/ss/mls.h
index 096d1b4..ab53663 100644
--- a/security/selinux/ss/mls.h
+++ b/security/selinux/ss/mls.h
@@ -27,6 +27,8 @@
int mls_compute_context_len(struct context *context);
void mls_sid_to_context(struct context *context, char **scontext);
int mls_context_isvalid(struct policydb *p, struct context *c);
+int mls_range_isvalid(struct policydb *p, struct mls_range *r);
+int mls_level_isvalid(struct policydb *p, struct mls_level *l);
int mls_context_to_sid(char oldc,
char **scontext,
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index 539828b..b582aae 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -713,6 +713,27 @@
return rc;
}
+int policydb_class_isvalid(struct policydb *p, unsigned int class)
+{
+ if (!class || class > p->p_classes.nprim)
+ return 0;
+ return 1;
+}
+
+int policydb_role_isvalid(struct policydb *p, unsigned int role)
+{
+ if (!role || role > p->p_roles.nprim)
+ return 0;
+ return 1;
+}
+
+int policydb_type_isvalid(struct policydb *p, unsigned int type)
+{
+ if (!type || type > p->p_types.nprim)
+ return 0;
+ return 1;
+}
+
/*
* Return 1 if the fields in the security context
* structure `c' are valid. Return 0 otherwise.
@@ -1260,6 +1281,7 @@
"categories\n");
goto bad;
}
+
return 0;
bad:
@@ -1563,7 +1585,7 @@
p->symtab[i].nprim = nprim;
}
- rc = avtab_read(&p->te_avtab, fp, p->policyvers);
+ rc = avtab_read(&p->te_avtab, fp, p);
if (rc)
goto bad;
@@ -1595,6 +1617,12 @@
tr->role = le32_to_cpu(buf[0]);
tr->type = le32_to_cpu(buf[1]);
tr->new_role = le32_to_cpu(buf[2]);
+ if (!policydb_role_isvalid(p, tr->role) ||
+ !policydb_type_isvalid(p, tr->type) ||
+ !policydb_role_isvalid(p, tr->new_role)) {
+ rc = -EINVAL;
+ goto bad;
+ }
ltr = tr;
}
@@ -1619,6 +1647,11 @@
goto bad;
ra->role = le32_to_cpu(buf[0]);
ra->new_role = le32_to_cpu(buf[1]);
+ if (!policydb_role_isvalid(p, ra->role) ||
+ !policydb_role_isvalid(p, ra->new_role)) {
+ rc = -EINVAL;
+ goto bad;
+ }
lra = ra;
}
@@ -1872,9 +1905,19 @@
rt->target_class = le32_to_cpu(buf[0]);
} else
rt->target_class = SECCLASS_PROCESS;
+ if (!policydb_type_isvalid(p, rt->source_type) ||
+ !policydb_type_isvalid(p, rt->target_type) ||
+ !policydb_class_isvalid(p, rt->target_class)) {
+ rc = -EINVAL;
+ goto bad;
+ }
rc = mls_read_range_helper(&rt->target_range, fp);
if (rc)
goto bad;
+ if (!mls_range_isvalid(p, &rt->target_range)) {
+ printk(KERN_WARNING "security: rangetrans: invalid range\n");
+ goto bad;
+ }
lrt = rt;
}
}
diff --git a/security/selinux/ss/policydb.h b/security/selinux/ss/policydb.h
index 844d310..ed6fc68 100644
--- a/security/selinux/ss/policydb.h
+++ b/security/selinux/ss/policydb.h
@@ -251,6 +251,9 @@
extern void policydb_destroy(struct policydb *p);
extern int policydb_load_isids(struct policydb *p, struct sidtab *s);
extern int policydb_context_isvalid(struct policydb *p, struct context *c);
+extern int policydb_class_isvalid(struct policydb *p, unsigned int class);
+extern int policydb_type_isvalid(struct policydb *p, unsigned int type);
+extern int policydb_role_isvalid(struct policydb *p, unsigned int role);
extern int policydb_read(struct policydb *p, void *fp);
#define PERM_SYMTAB_SIZE 32
diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index 36a191e..e076039 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -211,26 +211,27 @@
if (uctx->ctx_doi != XFRM_SC_ALG_SELINUX)
return -EINVAL;
- if (uctx->ctx_len >= PAGE_SIZE)
+ str_len = uctx->ctx_len;
+ if (str_len >= PAGE_SIZE)
return -ENOMEM;
*ctxp = ctx = kmalloc(sizeof(*ctx) +
- uctx->ctx_len + 1,
+ str_len + 1,
GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->ctx_doi = uctx->ctx_doi;
- ctx->ctx_len = uctx->ctx_len;
+ ctx->ctx_len = str_len;
ctx->ctx_alg = uctx->ctx_alg;
memcpy(ctx->ctx_str,
uctx+1,
- ctx->ctx_len);
- ctx->ctx_str[ctx->ctx_len] = 0;
+ str_len);
+ ctx->ctx_str[str_len] = 0;
rc = security_context_to_sid(ctx->ctx_str,
- ctx->ctx_len,
+ str_len,
&ctx->ctx_sid);
if (rc)