[PATCH] USB Serial: move old changelog comments out of source code
Create a new file just for these things, as they just get in the
way in the source files.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old
new file mode 100644
index 0000000..c1b2799
--- /dev/null
+++ b/drivers/usb/serial/ChangeLog.old
@@ -0,0 +1,730 @@
+This is the contents of some of the drivers/usb/serial/ files that had old
+changelog comments. They were quite old, and out of date, and we don't keep
+them anymore, so I've put them here, away from the source files, in case
+people still care to see them.
+
+- Greg Kroah-Hartman <greg@kroah.com> October 20, 2005
+
+-----------------------------------------------------------------------
+usb-serial.h Change Log comments:
+
+ (03/26/2002) gkh
+ removed the port->tty check from port_paranoia_check() due to serial
+ consoles not having a tty device assigned to them.
+
+ (12/03/2001) gkh
+ removed active from the port structure.
+ added documentation to the usb_serial_device_type structure
+
+ (10/10/2001) gkh
+ added vendor and product to serial structure. Needed to determine device
+ owner when the device is disconnected.
+
+ (05/30/2001) gkh
+ added sem to port structure and removed port_lock
+
+ (10/05/2000) gkh
+ Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
+ fix bug with urb->dev not being set properly, now that the usb core
+ needs it.
+
+ (09/11/2000) gkh
+ Added usb_serial_debug_data function to help get rid of #DEBUG in the
+ drivers.
+
+ (08/28/2000) gkh
+ Added port_lock to port structure.
+
+ (08/08/2000) gkh
+ Added open_count to port structure.
+
+ (07/23/2000) gkh
+ Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+ Modifications to allow usb-serial drivers to be modules.
+
+-----------------------------------------------------------------------
+usb-serial.c Change Log comments:
+
+ (12/10/2002) gkh
+ Split the ports off into their own struct device, and added a
+ usb-serial bus driver.
+
+ (11/19/2002) gkh
+ removed a few #ifdefs for the generic code and cleaned up the failure
+ logic in initialization.
+
+ (10/02/2002) gkh
+ moved the console code to console.c and out of this file.
+
+ (06/05/2002) gkh
+ moved location of startup() call in serial_probe() until after all
+ of the port information and endpoints are initialized. This makes
+ things easier for some drivers.
+
+ (04/10/2002) gkh
+ added serial_read_proc function which creates a
+ /proc/tty/driver/usb-serial file.
+
+ (03/27/2002) gkh
+ Got USB serial console code working properly and merged into the main
+ version of the tree. Thanks to Randy Dunlap for the initial version
+ of this code, and for pushing me to finish it up.
+ The USB serial console works with any usb serial driver device.
+
+ (03/21/2002) gkh
+ Moved all manipulation of port->open_count into the core. Now the
+ individual driver's open and close functions are called only when the
+ first open() and last close() is called. Making the drivers a bit
+ smaller and simpler.
+ Fixed a bug if a driver didn't have the owner field set.
+
+ (02/26/2002) gkh
+ Moved all locking into the main serial_* functions, instead of having
+ the individual drivers have to grab the port semaphore. This should
+ reduce races.
+ Reworked the MOD_INC logic a bit to always increment and decrement, even
+ if the generic driver is being used.
+
+ (10/10/2001) gkh
+ usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
+ help prevent child drivers from accessing the device since it is now
+ gone.
+
+ (09/13/2001) gkh
+ Moved generic driver initialize after we have registered with the USB
+ core. Thanks to Randy Dunlap for pointing this problem out.
+
+ (07/03/2001) gkh
+ Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
+ Fixed vendor and product getting defined through the MODULE_PARM macro
+ if the Generic driver wasn't compiled in.
+ Fixed problem with generic_shutdown() not being called for drivers that
+ don't have a shutdown() function.
+
+ (06/06/2001) gkh
+ added evil hack that is needed for the prolific pl2303 device due to the
+ crazy way its endpoints are set up.
+
+ (05/30/2001) gkh
+ switched from using spinlock to a semaphore, which fixes lots of problems.
+
+ (04/08/2001) gb
+ Identify version on module load.
+
+ 2001_02_05 gkh
+ Fixed buffer overflows bug with the generic serial driver. Thanks to
+ Todd Squires <squirest@ct0.com> for fixing this.
+
+ (01/10/2001) gkh
+ Fixed bug where the generic serial adaptor grabbed _any_ device that was
+ offered to it.
+
+ (12/12/2000) gkh
+ Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
+ moved them to the serial_open and serial_close functions.
+ Also fixed bug with there not being a MOD_DEC for the generic driver
+ (thanks to Gary Brubaker for finding this.)
+
+ (11/29/2000) gkh
+ Small NULL pointer initialization cleanup which saves a bit of disk image
+
+ (11/01/2000) Adam J. Richter
+ instead of using idVendor/idProduct pairs, usb serial drivers
+ now identify their hardware interest with usb_device_id tables,
+ which they usually have anyhow for use with MODULE_DEVICE_TABLE.
+
+ (10/05/2000) gkh
+ Fixed bug with urb->dev not being set properly, now that the usb
+ core needs it.
+
+ (09/11/2000) gkh
+ Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (08/28/2000) gkh
+ Added port_lock to port structure.
+ Added locks for SMP safeness to generic driver
+ Fixed the ability to open a generic device's port more than once.
+
+ (07/23/2000) gkh
+ Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+ Modifications to allow usb-serial drivers to be modules.
+
+ (07/03/2000) gkh
+ Added more debugging to serial_ioctl call
+
+ (06/25/2000) gkh
+ Changed generic_write_bulk_callback to not call wake_up_interruptible
+ directly, but to have port_softint do it at a safer time.
+
+ (06/23/2000) gkh
+ Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (05/22/2000) gkh
+ Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
+ removed from the individual device source files.
+
+ (05/03/2000) gkh
+ Added the Digi Acceleport driver from Al Borchers and Peter Berger.
+
+ (05/02/2000) gkh
+ Changed devfs and tty register code to work properly now. This was based on
+ the ACM driver changes by Vojtech Pavlik.
+
+ (04/27/2000) Ryan VanderBijl
+ Put calls to *_paranoia_checks into one function.
+
+ (04/23/2000) gkh
+ Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
+ Moved when the startup code printed out the devices that are supported.
+
+ (04/19/2000) gkh
+ Added driver for ZyXEL omni.net lcd plus ISDN TA
+ Made startup info message specify which drivers were compiled in.
+
+ (04/03/2000) gkh
+ Changed the probe process to remove the module unload races.
+ Changed where the tty layer gets initialized to have devfs work nicer.
+ Added initial devfs support.
+
+ (03/26/2000) gkh
+ Split driver up into device specific pieces.
+
+ (03/19/2000) gkh
+ Fixed oops that could happen when device was removed while a program
+ was talking to the device.
+ Removed the static urbs and now all urbs are created and destroyed
+ dynamically.
+ Reworked the internal interface. Now everything is based on the
+ usb_serial_port structure instead of the larger usb_serial structure.
+ This fixes the bug that a multiport device could not have more than
+ one port open at one time.
+
+ (03/17/2000) gkh
+ Added config option for debugging messages.
+ Added patch for keyspan pda from Brian Warner.
+
+ (03/06/2000) gkh
+ Added the keyspan pda code from Brian Warner <warner@lothar.com>
+ Moved a bunch of the port specific stuff into its own structure. This
+ is in anticipation of the true multiport devices (there's a bug if you
+ try to access more than one port of any multiport device right now)
+
+ (02/21/2000) gkh
+ Made it so that any serial devices only have to specify which functions
+ they want to overload from the generic function calls (great,
+ inheritance in C, in a driver, just what I wanted...)
+ Added support for set_termios and ioctl function calls. No drivers take
+ advantage of this yet.
+ Removed the #ifdef MODULE, now there is no module specific code.
+ Cleaned up a few comments in usb-serial.h that were wrong (thanks again
+ to Miles Lott).
+ Small fix to get_free_serial.
+
+ (02/14/2000) gkh
+ Removed the Belkin and Peracom functionality from the driver due to
+ the lack of support from the vendor, and me not wanting people to
+ accidenatly buy the device, expecting it to work with Linux.
+ Added read_bulk_callback and write_bulk_callback to the type structure
+ for the needs of the FTDI and WhiteHEAT driver.
+ Changed all reverences to FTDI to FTDI_SIO at the request of Bill
+ Ryder.
+ Changed the output urb size back to the max endpoint size to make
+ the ftdi_sio driver have it easier, and due to the fact that it didn't
+ really increase the speed any.
+
+ (02/11/2000) gkh
+ Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
+ patch from Miles Lott (milos@insync.net).
+ Fixed bug with not restoring the minor range that a device grabs, if
+ the startup function fails (thanks Miles for finding this).
+
+ (02/05/2000) gkh
+ Added initial framework for the Keyspan PDA serial converter so that
+ Brian Warner has a place to put his code.
+ Made the ezusb specific functions generic enough that different
+ devices can use them (whiteheat and keyspan_pda both need them).
+ Split out a whole bunch of structure and other stuff to a separate
+ usb-serial.h file.
+ Made the Visor connection messages a little more understandable, now
+ that Miles Lott (milos@insync.net) has gotten the Generic channel to
+ work. Also made them always show up in the log file.
+
+ (01/25/2000) gkh
+ Added initial framework for FTDI serial converter so that Bill Ryder
+ has a place to put his code.
+ Added the vendor specific info from Handspring. Now we can print out
+ informational debug messages as well as understand what is happening.
+
+ (01/23/2000) gkh
+ Fixed problem of crash when trying to open a port that didn't have a
+ device assigned to it. Made the minor node finding a little smarter,
+ now it looks to find a continuous space for the new device.
+
+ (01/21/2000) gkh
+ Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
+ Fixed get_serial_by_minor which was all messed up for multi port
+ devices. Fixed multi port problem for generic devices. Now the number
+ of ports is determined by the number of bulk out endpoints for the
+ generic device.
+
+ (01/19/2000) gkh
+ Removed lots of cruft that was around from the old (pre urb) driver
+ interface.
+ Made the serial_table dynamic. This should save lots of memory when
+ the number of minor nodes goes up to 256.
+ Added initial support for devices that have more than one port.
+ Added more debugging comments for the Visor, and added a needed
+ set_configuration call.
+
+ (01/17/2000) gkh
+ Fixed the WhiteHEAT firmware (my processing tool had a bug)
+ and added new debug loader firmware for it.
+ Removed the put_char function as it isn't really needed.
+ Added visor startup commands as found by the Win98 dump.
+
+ (01/13/2000) gkh
+ Fixed the vendor id for the generic driver to the one I meant it to be.
+
+ (01/12/2000) gkh
+ Forget the version numbering...that's pretty useless...
+ Made the driver able to be compiled so that the user can select which
+ converter they want to use. This allows people who only want the Visor
+ support to not pay the memory size price of the WhiteHEAT.
+ Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
+ grabbed the root hub. Not good.
+
+ version 0.4.0 (01/10/2000) gkh
+ Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
+ device. Added startup function to allow firmware to be downloaded to
+ a device if it needs to be.
+ Added firmware download logic to the WhiteHEAT device.
+ Started to add #defines to split up the different drivers for potential
+ configuration option.
+
+ version 0.3.1 (12/30/99) gkh
+ Fixed problems with urb for bulk out.
+ Added initial support for multiple sets of endpoints. This enables
+ the Handspring Visor to be attached successfully. Only the first
+ bulk in / bulk out endpoint pair is being used right now.
+
+ version 0.3.0 (12/27/99) gkh
+ Added initial support for the Handspring Visor based on a patch from
+ Miles Lott (milos@sneety.insync.net)
+ Cleaned up the code a bunch and converted over to using urbs only.
+
+ version 0.2.3 (12/21/99) gkh
+ Added initial support for the Connect Tech WhiteHEAT converter.
+ Incremented the number of ports in expectation of getting the
+ WhiteHEAT to work properly (4 ports per connection).
+ Added notification on insertion and removal of what port the
+ device is/was connected to (and what kind of device it was).
+
+ version 0.2.2 (12/16/99) gkh
+ Changed major number to the new allocated number. We're legal now!
+
+ version 0.2.1 (12/14/99) gkh
+ Fixed bug that happens when device node is opened when there isn't a
+ device attached to it. Thanks to marek@webdesign.no for noticing this.
+
+ version 0.2.0 (11/10/99) gkh
+ Split up internals to make it easier to add different types of serial
+ converters to the code.
+ Added a "generic" driver that gets it's vendor and product id
+ from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
+ for the idea and sample code (from the usb scanner driver.)
+ Cleared up any licensing questions by releasing it under the GNU GPL.
+
+ version 0.1.2 (10/25/99) gkh
+ Fixed bug in detecting device.
+
+ version 0.1.1 (10/05/99) gkh
+ Changed the major number to not conflict with anything else.
+
+ version 0.1 (09/28/99) gkh
+ Can recognize the two different devices and start up a read from
+ device when asked to. Writes also work. No control signals yet, this
+ all is vendor specific data (i.e. no spec), also no control for
+ different baud rates or other bit settings.
+ Currently we are using the same devid as the acm driver. This needs
+ to change.
+
+-----------------------------------------------------------------------
+visor.c Change Log comments:
+
+ (06/03/2003) Judd Montgomery <judd at jpilot.org>
+ Added support for module parameter options for untested/unknown
+ devices.
+
+ (03/09/2003) gkh
+ Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
+ <brachtl@redgrep.cz> for the information.
+
+ (03/05/2003) gkh
+ Think Treo support is now working.
+
+ (04/03/2002) gkh
+ Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
+ <hiro@zob.ne.jp> for the information.
+
+ (03/27/2002) gkh
+ Removed assumptions that port->tty was always valid (is not true
+ for usb serial console devices.)
+
+ (03/23/2002) gkh
+ Added support for the Palm i705 device, thanks to Thomas Riemer
+ <tom@netmech.com> for the information.
+
+ (03/21/2002) gkh
+ Added support for the Palm m130 device, thanks to Udo Eisenbarth
+ <udo.eisenbarth@web.de> for the information.
+
+ (02/27/2002) gkh
+ Reworked the urb handling logic. We have no more pool, but dynamically
+ allocate the urb and the transfer buffer on the fly. In testing this
+ does not incure any measurable overhead. This also relies on the fact
+ that we have proper reference counting logic for urbs.
+
+ (02/21/2002) SilaS
+ Added initial support for the Palm m515 devices.
+
+ (02/14/2002) gkh
+ Added support for the Clie S-360 device.
+
+ (12/18/2001) gkh
+ Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
+ for the patch.
+
+ (11/11/2001) gkh
+ Added support for the m125 devices, and added check to prevent oopses
+ for Clié devices that lie about the number of ports they have.
+
+ (08/30/2001) gkh
+ Added support for the Clie devices, both the 3.5 and 4.0 os versions.
+ Many thanks to Daniel Burke, and Bryan Payne for helping with this.
+
+ (08/23/2001) gkh
+ fixed a few potential bugs pointed out by Oliver Neukum.
+
+ (05/30/2001) gkh
+ switched from using spinlock to a semaphore, which fixes lots of problems.
+
+ (05/28/2000) gkh
+ Added initial support for the Palm m500 and Palm m505 devices.
+
+ (04/08/2001) gb
+ Identify version on module load.
+
+ (01/21/2000) gkh
+ Added write_room and chars_in_buffer, as they were previously using the
+ generic driver versions which is all wrong now that we are using an urb
+ pool. Thanks to Wolfgang Grandegger for pointing this out to me.
+ Removed count assignment in the write function, which was not needed anymore
+ either. Thanks to Al Borchers for pointing this out.
+
+ (12/12/2000) gkh
+ Moved MOD_DEC to end of visor_close to be nicer, as the final write
+ message can sleep.
+
+ (11/12/2000) gkh
+ Fixed bug with data being dropped on the floor by forcing tty->low_latency
+ to be on. Hopefully this fixes the OHCI issue!
+
+ (11/01/2000) Adam J. Richter
+ usb_device_id table support
+
+ (10/05/2000) gkh
+ Fixed bug with urb->dev not being set properly, now that the usb
+ core needs it.
+
+ (09/11/2000) gkh
+ Got rid of always calling kmalloc for every urb we wrote out to the
+ device.
+ Added visor_read_callback so we can keep track of bytes in and out for
+ those people who like to know the speed of their device.
+ Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (09/06/2000) gkh
+ Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
+ the host controller drivers set urb->dev = NULL when the urb is finished.
+
+ (08/28/2000) gkh
+ Added locks for SMP safeness.
+
+ (08/08/2000) gkh
+ Fixed endian problem in visor_startup.
+ Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
+ than once.
+
+ (07/23/2000) gkh
+ Added pool of write urbs to speed up transfers to the visor.
+
+ (07/19/2000) gkh
+ Added module_init and module_exit functions to handle the fact that this
+ driver is a loadable module now.
+
+ (07/03/2000) gkh
+ Added visor_set_ioctl and visor_set_termios functions (they don't do much
+ of anything, but are good for debugging.)
+
+ (06/25/2000) gkh
+ Fixed bug in visor_unthrottle that should help with the disconnect in PPP
+ bug that people have been reporting.
+
+ (06/23/2000) gkh
+ Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (04/27/2000) Ryan VanderBijl
+ Fixed memory leak in visor_close
+
+ (03/26/2000) gkh
+ Split driver up into device specific pieces.
+
+-----------------------------------------------------------------------
+pl2303.c Change Log comments:
+
+ 2002_Mar_26 gkh
+ allowed driver to work properly if there is no tty assigned to a port
+ (this happens for serial console devices.)
+
+ 2001_Oct_06 gkh
+ Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
+
+ 2001_Sep_19 gkh
+ Added break support.
+
+ 2001_Aug_30 gkh
+ fixed oops in write_bulk_callback.
+
+ 2001_Aug_28 gkh
+ reworked buffer logic to be like other usb-serial drivers. Hopefully
+ removing some reported problems.
+
+ 2001_Jun_06 gkh
+ finished porting to 2.4 format.
+
+
+-----------------------------------------------------------------------
+io_edgeport.c Change Log comments:
+
+ 2003_04_03 al borchers
+ - fixed a bug (that shows up with dosemu) where the tty struct is
+ used in a callback after it has been freed
+
+ 2.3 2002_03_08 greg kroah-hartman
+ - fixed bug when multiple devices were attached at the same time.
+
+ 2.2 2001_11_14 greg kroah-hartman
+ - fixed bug in edge_close that kept the port from being used more
+ than once.
+ - fixed memory leak on device removal.
+ - fixed potential double free of memory when command urb submitting
+ failed.
+ - other small cleanups when the device is removed
+
+ 2.1 2001_07_09 greg kroah-hartman
+ - added support for TIOCMBIS and TIOCMBIC.
+
+ (04/08/2001) gb
+ - Identify version on module load.
+
+ 2.0 2001_03_05 greg kroah-hartman
+ - reworked entire driver to fit properly in with the other usb-serial
+ drivers. Occasional oopses still happen, but it's a good start.
+
+ 1.2.3 (02/23/2001) greg kroah-hartman
+ - changed device table to work properly for 2.4.x final format.
+ - fixed problem with dropping data at high data rates.
+
+ 1.2.2 (11/27/2000) greg kroah-hartman
+ - cleaned up more NTisms.
+ - Added device table for 2.4.0-test11
+
+ 1.2.1 (11/08/2000) greg kroah-hartman
+ - Started to clean up NTisms.
+ - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
+
+ 1.2 (10/17/2000) David Iacovelli
+ Remove all EPIC code and GPL source
+ Fix RELEVANT_IFLAG macro to include flow control
+ changes port configuration changes.
+ Fix redefinition of SERIAL_MAGIC
+ Change all timeout values to 5 seconds
+ Tried to fix the UHCI multiple urb submission, but failed miserably.
+ it seems to work fine with OHCI.
+ ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
+ find a way to work arount this UHCI bug )
+
+ 1.1 (10/11/2000) David Iacovelli
+ Fix XON/XOFF flow control to support both IXON and IXOFF
+
+ 0.9.27 (06/30/2000) David Iacovelli
+ Added transmit queue and now allocate urb for command writes.
+
+ 0.9.26 (06/29/2000) David Iacovelli
+ Add support for 80251 based edgeport
+
+ 0.9.25 (06/27/2000) David Iacovelli
+ Do not close the port if it has multiple opens.
+
+ 0.9.24 (05/26/2000) David Iacovelli
+ Add IOCTLs to support RXTX and JAVA POS
+ and first cut at running BlackBox Demo
+
+ 0.9.23 (05/24/2000) David Iacovelli
+ Add IOCTLs to support RXTX and JAVA POS
+
+ 0.9.22 (05/23/2000) David Iacovelli
+ fixed bug in enumeration. If epconfig turns on mapping by
+ path after a device is already plugged in, we now update
+ the mapping correctly
+
+ 0.9.21 (05/16/2000) David Iacovelli
+ Added BlockUntilChaseResp() to also wait for txcredits
+ Updated the way we allocate and handle write URBs
+ Add debug code to dump buffers
+
+ 0.9.20 (05/01/2000) David Iacovelli
+ change driver to use usb/tts/
+
+ 0.9.19 (05/01/2000) David Iacovelli
+ Update code to compile if DEBUG is off
+
+ 0.9.18 (04/28/2000) David Iacovelli
+ cleanup and test tty_register with devfs
+
+ 0.9.17 (04/27/2000) greg kroah-hartman
+ changed tty_register around to be like the way it
+ was before, but now it works properly with devfs.
+
+ 0.9.16 (04/26/2000) david iacovelli
+ Fixed bug in GetProductInfo()
+
+ 0.9.15 (04/25/2000) david iacovelli
+ Updated enumeration
+
+ 0.9.14 (04/24/2000) david iacovelli
+ Removed all config/status IOCTLS and
+ converted to using /proc/edgeport
+ still playing with devfs
+
+ 0.9.13 (04/24/2000) david iacovelli
+ Removed configuration based on ttyUSB0
+ Added support for configuration using /prod/edgeport
+ first attempt at using devfs (not working yet!)
+ Added IOCTL to GetProductInfo()
+ Added support for custom baud rates
+ Add support for random port numbers
+
+ 0.9.12 (04/18/2000) david iacovelli
+ added additional configuration IOCTLs
+ use ttyUSB0 for configuration
+
+ 0.9.11 (04/17/2000) greg kroah-hartman
+ fixed module initialization race conditions.
+ made all urbs dynamically allocated.
+ made driver devfs compatible. now it only registers the tty device
+ when the device is actually plugged in.
+
+ 0.9.10 (04/13/2000) greg kroah-hartman
+ added proc interface framework.
+
+ 0.9.9 (04/13/2000) david iacovelli
+ added enumeration code and ioctls to configure the device
+
+ 0.9.8 (04/12/2000) david iacovelli
+ Change interrupt read start when device is plugged in
+ and stop when device is removed
+ process interrupt reads when all ports are closed
+ (keep value of rxBytesAvail consistent with the edgeport)
+ set the USB_BULK_QUEUE flag so that we can shove a bunch
+ of urbs at once down the pipe
+
+ 0.9.7 (04/10/2000) david iacovelli
+ start to add enumeration code.
+ generate serial number for epic devices
+ add support for kdb
+
+ 0.9.6 (03/30/2000) david iacovelli
+ add IOCTL to get string, manufacture, and boot descriptors
+
+ 0.9.5 (03/14/2000) greg kroah-hartman
+ more error checking added to SerialOpen to try to fix UHCI open problem
+
+ 0.9.4 (03/09/2000) greg kroah-hartman
+ added more error checking to handle oops when data is hanging
+ around and tty is abruptly closed.
+
+ 0.9.3 (03/09/2000) david iacovelli
+ Add epic support for xon/xoff chars
+ play with performance
+
+ 0.9.2 (03/08/2000) greg kroah-hartman
+ changed most "info" calls to "dbg"
+ implemented flow control properly in the termios call
+
+ 0.9.1 (03/08/2000) david iacovelli
+ added EPIC support
+ enabled bootloader update
+
+ 0.9 (03/08/2000) greg kroah-hartman
+ Release to IO networks.
+ Integrated changes that David made
+ made getting urbs for writing SMP safe
+
+ 0.8 (03/07/2000) greg kroah-hartman
+ Release to IO networks.
+ Fixed problems that were seen in code by David.
+ Now both Edgeport/4 and Edgeport/2 works properly.
+ Changed most of the functions to use port instead of serial.
+
+ 0.7 (02/27/2000) greg kroah-hartman
+ Milestone 3 release.
+ Release to IO Networks
+ ioctl for waiting on line change implemented.
+ ioctl for getting statistics implemented.
+ multiport support working.
+ lsr and msr registers are now handled properly.
+ change break now hooked up and working.
+ support for all known Edgeport devices.
+
+ 0.6 (02/22/2000) greg kroah-hartman
+ Release to IO networks.
+ CHASE is implemented correctly when port is closed.
+ SerialOpen now blocks correctly until port is fully opened.
+
+ 0.5 (02/20/2000) greg kroah-hartman
+ Release to IO networks.
+ Known problems:
+ modem status register changes are not sent on to the user
+ CHASE is not implemented when the port is closed.
+
+ 0.4 (02/16/2000) greg kroah-hartman
+ Second cut at the CeBit demo.
+ Doesn't leak memory on every write to the port
+ Still small leaks on startup.
+ Added support for Edgeport/2 and Edgeport/8
+
+ 0.3 (02/15/2000) greg kroah-hartman
+ CeBit demo release.
+ Force the line settings to 4800, 8, 1, e for the demo.
+ Warning! This version leaks memory like crazy!
+
+ 0.2 (01/30/2000) greg kroah-hartman
+ Milestone 1 release.
+ Device is found by USB subsystem, enumerated, fimware is downloaded
+ and the descriptors are printed to the debug log, config is set, and
+ green light starts to blink. Open port works, and data can be sent
+ and received at the default settings of the UART. Loopback connector
+ and debug log confirms this.
+
+ 0.1 (01/23/2000) greg kroah-hartman
+ Initial release to help IO Networks try to set up their test system.
+ Edgeport4 is recognized, firmware is downloaded, config is set so
+ device blinks green light every 3 sec. Port is bound, but opening,
+ closing, and sending data do not work properly.
+
+
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 04bfe27..dc4c498 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -27,225 +27,6 @@
* Networks technical support, or Peter Berger <pberger@brimson.com>,
* or Al Borchers <alborchers@steinerpoint.com>.
*
- * Version history:
- *
- * 2003_04_03 al borchers
- * - fixed a bug (that shows up with dosemu) where the tty struct is
- * used in a callback after it has been freed
- *
- * 2.3 2002_03_08 greg kroah-hartman
- * - fixed bug when multiple devices were attached at the same time.
- *
- * 2.2 2001_11_14 greg kroah-hartman
- * - fixed bug in edge_close that kept the port from being used more
- * than once.
- * - fixed memory leak on device removal.
- * - fixed potential double free of memory when command urb submitting
- * failed.
- * - other small cleanups when the device is removed
- *
- * 2.1 2001_07_09 greg kroah-hartman
- * - added support for TIOCMBIS and TIOCMBIC.
- *
- * (04/08/2001) gb
- * - Identify version on module load.
- *
- * 2.0 2001_03_05 greg kroah-hartman
- * - reworked entire driver to fit properly in with the other usb-serial
- * drivers. Occasional oopses still happen, but it's a good start.
- *
- * 1.2.3 (02/23/2001) greg kroah-hartman
- * - changed device table to work properly for 2.4.x final format.
- * - fixed problem with dropping data at high data rates.
- *
- * 1.2.2 (11/27/2000) greg kroah-hartman
- * - cleaned up more NTisms.
- * - Added device table for 2.4.0-test11
- *
- * 1.2.1 (11/08/2000) greg kroah-hartman
- * - Started to clean up NTisms.
- * - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
- *
- * 1.2 (10/17/2000) David Iacovelli
- * Remove all EPIC code and GPL source
- * Fix RELEVANT_IFLAG macro to include flow control
- * changes port configuration changes.
- * Fix redefinition of SERIAL_MAGIC
- * Change all timeout values to 5 seconds
- * Tried to fix the UHCI multiple urb submission, but failed miserably.
- * it seems to work fine with OHCI.
- * ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
- * find a way to work arount this UHCI bug )
- *
- * 1.1 (10/11/2000) David Iacovelli
- * Fix XON/XOFF flow control to support both IXON and IXOFF
- *
- * 0.9.27 (06/30/2000) David Iacovelli
- * Added transmit queue and now allocate urb for command writes.
- *
- * 0.9.26 (06/29/2000) David Iacovelli
- * Add support for 80251 based edgeport
- *
- * 0.9.25 (06/27/2000) David Iacovelli
- * Do not close the port if it has multiple opens.
- *
- * 0.9.24 (05/26/2000) David Iacovelli
- * Add IOCTLs to support RXTX and JAVA POS
- * and first cut at running BlackBox Demo
- *
- * 0.9.23 (05/24/2000) David Iacovelli
- * Add IOCTLs to support RXTX and JAVA POS
- *
- * 0.9.22 (05/23/2000) David Iacovelli
- * fixed bug in enumeration. If epconfig turns on mapping by
- * path after a device is already plugged in, we now update
- * the mapping correctly
- *
- * 0.9.21 (05/16/2000) David Iacovelli
- * Added BlockUntilChaseResp() to also wait for txcredits
- * Updated the way we allocate and handle write URBs
- * Add debug code to dump buffers
- *
- * 0.9.20 (05/01/2000) David Iacovelli
- * change driver to use usb/tts/
- *
- * 0.9.19 (05/01/2000) David Iacovelli
- * Update code to compile if DEBUG is off
- *
- * 0.9.18 (04/28/2000) David Iacovelli
- * cleanup and test tty_register with devfs
- *
- * 0.9.17 (04/27/2000) greg kroah-hartman
- * changed tty_register around to be like the way it
- * was before, but now it works properly with devfs.
- *
- * 0.9.16 (04/26/2000) david iacovelli
- * Fixed bug in GetProductInfo()
- *
- * 0.9.15 (04/25/2000) david iacovelli
- * Updated enumeration
- *
- * 0.9.14 (04/24/2000) david iacovelli
- * Removed all config/status IOCTLS and
- * converted to using /proc/edgeport
- * still playing with devfs
- *
- * 0.9.13 (04/24/2000) david iacovelli
- * Removed configuration based on ttyUSB0
- * Added support for configuration using /prod/edgeport
- * first attempt at using devfs (not working yet!)
- * Added IOCTL to GetProductInfo()
- * Added support for custom baud rates
- * Add support for random port numbers
- *
- * 0.9.12 (04/18/2000) david iacovelli
- * added additional configuration IOCTLs
- * use ttyUSB0 for configuration
- *
- * 0.9.11 (04/17/2000) greg kroah-hartman
- * fixed module initialization race conditions.
- * made all urbs dynamically allocated.
- * made driver devfs compatible. now it only registers the tty device
- * when the device is actually plugged in.
- *
- * 0.9.10 (04/13/2000) greg kroah-hartman
- * added proc interface framework.
- *
- * 0.9.9 (04/13/2000) david iacovelli
- * added enumeration code and ioctls to configure the device
- *
- * 0.9.8 (04/12/2000) david iacovelli
- * Change interrupt read start when device is plugged in
- * and stop when device is removed
- * process interrupt reads when all ports are closed
- * (keep value of rxBytesAvail consistent with the edgeport)
- * set the USB_BULK_QUEUE flag so that we can shove a bunch
- * of urbs at once down the pipe
- *
- * 0.9.7 (04/10/2000) david iacovelli
- * start to add enumeration code.
- * generate serial number for epic devices
- * add support for kdb
- *
- * 0.9.6 (03/30/2000) david iacovelli
- * add IOCTL to get string, manufacture, and boot descriptors
- *
- * 0.9.5 (03/14/2000) greg kroah-hartman
- * more error checking added to SerialOpen to try to fix UHCI open problem
- *
- * 0.9.4 (03/09/2000) greg kroah-hartman
- * added more error checking to handle oops when data is hanging
- * around and tty is abruptly closed.
- *
- * 0.9.3 (03/09/2000) david iacovelli
- * Add epic support for xon/xoff chars
- * play with performance
- *
- * 0.9.2 (03/08/2000) greg kroah-hartman
- * changed most "info" calls to "dbg"
- * implemented flow control properly in the termios call
- *
- * 0.9.1 (03/08/2000) david iacovelli
- * added EPIC support
- * enabled bootloader update
- *
- * 0.9 (03/08/2000) greg kroah-hartman
- * Release to IO networks.
- * Integrated changes that David made
- * made getting urbs for writing SMP safe
- *
- * 0.8 (03/07/2000) greg kroah-hartman
- * Release to IO networks.
- * Fixed problems that were seen in code by David.
- * Now both Edgeport/4 and Edgeport/2 works properly.
- * Changed most of the functions to use port instead of serial.
- *
- * 0.7 (02/27/2000) greg kroah-hartman
- * Milestone 3 release.
- * Release to IO Networks
- * ioctl for waiting on line change implemented.
- * ioctl for getting statistics implemented.
- * multiport support working.
- * lsr and msr registers are now handled properly.
- * change break now hooked up and working.
- * support for all known Edgeport devices.
- *
- * 0.6 (02/22/2000) greg kroah-hartman
- * Release to IO networks.
- * CHASE is implemented correctly when port is closed.
- * SerialOpen now blocks correctly until port is fully opened.
- *
- * 0.5 (02/20/2000) greg kroah-hartman
- * Release to IO networks.
- * Known problems:
- * modem status register changes are not sent on to the user
- * CHASE is not implemented when the port is closed.
- *
- * 0.4 (02/16/2000) greg kroah-hartman
- * Second cut at the CeBit demo.
- * Doesn't leak memory on every write to the port
- * Still small leaks on startup.
- * Added support for Edgeport/2 and Edgeport/8
- *
- * 0.3 (02/15/2000) greg kroah-hartman
- * CeBit demo release.
- * Force the line settings to 4800, 8, 1, e for the demo.
- * Warning! This version leaks memory like crazy!
- *
- * 0.2 (01/30/2000) greg kroah-hartman
- * Milestone 1 release.
- * Device is found by USB subsystem, enumerated, fimware is downloaded
- * and the descriptors are printed to the debug log, config is set, and
- * green light starts to blink. Open port works, and data can be sent
- * and received at the default settings of the UART. Loopback connector
- * and debug log confirms this.
- *
- * 0.1 (01/23/2000) greg kroah-hartman
- * Initial release to help IO Networks try to set up their test system.
- * Edgeport4 is recognized, firmware is downloaded, config is set so
- * device blinks green light every 3 sec. Port is bound, but opening,
- * closing, and sending data do not work properly.
- *
*/
#include <linux/config.h>
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index beef3c4..29719ce 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -8,31 +8,10 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
- * 2002_Mar_26 gkh
- * allowed driver to work properly if there is no tty assigned to a port
- * (this happens for serial console devices.)
- *
- * 2001_Oct_06 gkh
- * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
- *
- * 2001_Sep_19 gkh
- * Added break support.
- *
- * 2001_Aug_30 gkh
- * fixed oops in write_bulk_callback.
- *
- * 2001_Aug_28 gkh
- * reworked buffer logic to be like other usb-serial drivers. Hopefully
- * removing some reported problems.
- *
- * 2001_Jun_06 gkh
- * finished porting to 2.4 format.
- *
*/
#include <linux/config.h>
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 08f6003..fde09fb 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1,7 +1,7 @@
/*
* USB Serial Converter driver
*
- * Copyright (C) 1999 - 2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2000 Peter Berger (pberger@brimson.com)
* Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
*
@@ -9,316 +9,11 @@
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
- * This driver was originally based on the ACM driver by Armin Fuerst (which was
+ * This driver was originally based on the ACM driver by Armin Fuerst (which was
* based on a driver by Brad Keryan)
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
- * (12/10/2002) gkh
- * Split the ports off into their own struct device, and added a
- * usb-serial bus driver.
- *
- * (11/19/2002) gkh
- * removed a few #ifdefs for the generic code and cleaned up the failure
- * logic in initialization.
- *
- * (10/02/2002) gkh
- * moved the console code to console.c and out of this file.
- *
- * (06/05/2002) gkh
- * moved location of startup() call in serial_probe() until after all
- * of the port information and endpoints are initialized. This makes
- * things easier for some drivers.
- *
- * (04/10/2002) gkh
- * added serial_read_proc function which creates a
- * /proc/tty/driver/usb-serial file.
- *
- * (03/27/2002) gkh
- * Got USB serial console code working properly and merged into the main
- * version of the tree. Thanks to Randy Dunlap for the initial version
- * of this code, and for pushing me to finish it up.
- * The USB serial console works with any usb serial driver device.
- *
- * (03/21/2002) gkh
- * Moved all manipulation of port->open_count into the core. Now the
- * individual driver's open and close functions are called only when the
- * first open() and last close() is called. Making the drivers a bit
- * smaller and simpler.
- * Fixed a bug if a driver didn't have the owner field set.
- *
- * (02/26/2002) gkh
- * Moved all locking into the main serial_* functions, instead of having
- * the individual drivers have to grab the port semaphore. This should
- * reduce races.
- * Reworked the MOD_INC logic a bit to always increment and decrement, even
- * if the generic driver is being used.
- *
- * (10/10/2001) gkh
- * usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
- * help prevent child drivers from accessing the device since it is now
- * gone.
- *
- * (09/13/2001) gkh
- * Moved generic driver initialize after we have registered with the USB
- * core. Thanks to Randy Dunlap for pointing this problem out.
- *
- * (07/03/2001) gkh
- * Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
- * Fixed vendor and product getting defined through the MODULE_PARM macro
- * if the Generic driver wasn't compiled in.
- * Fixed problem with generic_shutdown() not being called for drivers that
- * don't have a shutdown() function.
- *
- * (06/06/2001) gkh
- * added evil hack that is needed for the prolific pl2303 device due to the
- * crazy way its endpoints are set up.
- *
- * (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of problems.
- *
- * (04/08/2001) gb
- * Identify version on module load.
- *
- * 2001_02_05 gkh
- * Fixed buffer overflows bug with the generic serial driver. Thanks to
- * Todd Squires <squirest@ct0.com> for fixing this.
- *
- * (01/10/2001) gkh
- * Fixed bug where the generic serial adaptor grabbed _any_ device that was
- * offered to it.
- *
- * (12/12/2000) gkh
- * Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
- * moved them to the serial_open and serial_close functions.
- * Also fixed bug with there not being a MOD_DEC for the generic driver
- * (thanks to Gary Brubaker for finding this.)
- *
- * (11/29/2000) gkh
- * Small NULL pointer initialization cleanup which saves a bit of disk image
- *
- * (11/01/2000) Adam J. Richter
- * instead of using idVendor/idProduct pairs, usb serial drivers
- * now identify their hardware interest with usb_device_id tables,
- * which they usually have anyhow for use with MODULE_DEVICE_TABLE.
- *
- * (10/05/2000) gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- *
- * (09/11/2000) gkh
- * Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (08/28/2000) gkh
- * Added port_lock to port structure.
- * Added locks for SMP safeness to generic driver
- * Fixed the ability to open a generic device's port more than once.
- *
- * (07/23/2000) gkh
- * Added bulk_out_endpointAddress to port structure.
- *
- * (07/19/2000) gkh, pberger, and borchers
- * Modifications to allow usb-serial drivers to be modules.
- *
- * (07/03/2000) gkh
- * Added more debugging to serial_ioctl call
- *
- * (06/25/2000) gkh
- * Changed generic_write_bulk_callback to not call wake_up_interruptible
- * directly, but to have port_softint do it at a safer time.
- *
- * (06/23/2000) gkh
- * Cleaned up debugging statements in a quest to find UHCI timeout bug.
- *
- * (05/22/2000) gkh
- * Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
- * removed from the individual device source files.
- *
- * (05/03/2000) gkh
- * Added the Digi Acceleport driver from Al Borchers and Peter Berger.
- *
- * (05/02/2000) gkh
- * Changed devfs and tty register code to work properly now. This was based on
- * the ACM driver changes by Vojtech Pavlik.
- *
- * (04/27/2000) Ryan VanderBijl
- * Put calls to *_paranoia_checks into one function.
- *
- * (04/23/2000) gkh
- * Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
- * Moved when the startup code printed out the devices that are supported.
- *
- * (04/19/2000) gkh
- * Added driver for ZyXEL omni.net lcd plus ISDN TA
- * Made startup info message specify which drivers were compiled in.
- *
- * (04/03/2000) gkh
- * Changed the probe process to remove the module unload races.
- * Changed where the tty layer gets initialized to have devfs work nicer.
- * Added initial devfs support.
- *
- * (03/26/2000) gkh
- * Split driver up into device specific pieces.
- *
- * (03/19/2000) gkh
- * Fixed oops that could happen when device was removed while a program
- * was talking to the device.
- * Removed the static urbs and now all urbs are created and destroyed
- * dynamically.
- * Reworked the internal interface. Now everything is based on the
- * usb_serial_port structure instead of the larger usb_serial structure.
- * This fixes the bug that a multiport device could not have more than
- * one port open at one time.
- *
- * (03/17/2000) gkh
- * Added config option for debugging messages.
- * Added patch for keyspan pda from Brian Warner.
- *
- * (03/06/2000) gkh
- * Added the keyspan pda code from Brian Warner <warner@lothar.com>
- * Moved a bunch of the port specific stuff into its own structure. This
- * is in anticipation of the true multiport devices (there's a bug if you
- * try to access more than one port of any multiport device right now)
- *
- * (02/21/2000) gkh
- * Made it so that any serial devices only have to specify which functions
- * they want to overload from the generic function calls (great,
- * inheritance in C, in a driver, just what I wanted...)
- * Added support for set_termios and ioctl function calls. No drivers take
- * advantage of this yet.
- * Removed the #ifdef MODULE, now there is no module specific code.
- * Cleaned up a few comments in usb-serial.h that were wrong (thanks again
- * to Miles Lott).
- * Small fix to get_free_serial.
- *
- * (02/14/2000) gkh
- * Removed the Belkin and Peracom functionality from the driver due to
- * the lack of support from the vendor, and me not wanting people to
- * accidenatly buy the device, expecting it to work with Linux.
- * Added read_bulk_callback and write_bulk_callback to the type structure
- * for the needs of the FTDI and WhiteHEAT driver.
- * Changed all reverences to FTDI to FTDI_SIO at the request of Bill
- * Ryder.
- * Changed the output urb size back to the max endpoint size to make
- * the ftdi_sio driver have it easier, and due to the fact that it didn't
- * really increase the speed any.
- *
- * (02/11/2000) gkh
- * Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
- * patch from Miles Lott (milos@insync.net).
- * Fixed bug with not restoring the minor range that a device grabs, if
- * the startup function fails (thanks Miles for finding this).
- *
- * (02/05/2000) gkh
- * Added initial framework for the Keyspan PDA serial converter so that
- * Brian Warner has a place to put his code.
- * Made the ezusb specific functions generic enough that different
- * devices can use them (whiteheat and keyspan_pda both need them).
- * Split out a whole bunch of structure and other stuff to a separate
- * usb-serial.h file.
- * Made the Visor connection messages a little more understandable, now
- * that Miles Lott (milos@insync.net) has gotten the Generic channel to
- * work. Also made them always show up in the log file.
- *
- * (01/25/2000) gkh
- * Added initial framework for FTDI serial converter so that Bill Ryder
- * has a place to put his code.
- * Added the vendor specific info from Handspring. Now we can print out
- * informational debug messages as well as understand what is happening.
- *
- * (01/23/2000) gkh
- * Fixed problem of crash when trying to open a port that didn't have a
- * device assigned to it. Made the minor node finding a little smarter,
- * now it looks to find a continuous space for the new device.
- *
- * (01/21/2000) gkh
- * Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
- * Fixed get_serial_by_minor which was all messed up for multi port
- * devices. Fixed multi port problem for generic devices. Now the number
- * of ports is determined by the number of bulk out endpoints for the
- * generic device.
- *
- * (01/19/2000) gkh
- * Removed lots of cruft that was around from the old (pre urb) driver
- * interface.
- * Made the serial_table dynamic. This should save lots of memory when
- * the number of minor nodes goes up to 256.
- * Added initial support for devices that have more than one port.
- * Added more debugging comments for the Visor, and added a needed
- * set_configuration call.
- *
- * (01/17/2000) gkh
- * Fixed the WhiteHEAT firmware (my processing tool had a bug)
- * and added new debug loader firmware for it.
- * Removed the put_char function as it isn't really needed.
- * Added visor startup commands as found by the Win98 dump.
- *
- * (01/13/2000) gkh
- * Fixed the vendor id for the generic driver to the one I meant it to be.
- *
- * (01/12/2000) gkh
- * Forget the version numbering...that's pretty useless...
- * Made the driver able to be compiled so that the user can select which
- * converter they want to use. This allows people who only want the Visor
- * support to not pay the memory size price of the WhiteHEAT.
- * Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
- * grabbed the root hub. Not good.
- *
- * version 0.4.0 (01/10/2000) gkh
- * Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
- * device. Added startup function to allow firmware to be downloaded to
- * a device if it needs to be.
- * Added firmware download logic to the WhiteHEAT device.
- * Started to add #defines to split up the different drivers for potential
- * configuration option.
- *
- * version 0.3.1 (12/30/99) gkh
- * Fixed problems with urb for bulk out.
- * Added initial support for multiple sets of endpoints. This enables
- * the Handspring Visor to be attached successfully. Only the first
- * bulk in / bulk out endpoint pair is being used right now.
- *
- * version 0.3.0 (12/27/99) gkh
- * Added initial support for the Handspring Visor based on a patch from
- * Miles Lott (milos@sneety.insync.net)
- * Cleaned up the code a bunch and converted over to using urbs only.
- *
- * version 0.2.3 (12/21/99) gkh
- * Added initial support for the Connect Tech WhiteHEAT converter.
- * Incremented the number of ports in expectation of getting the
- * WhiteHEAT to work properly (4 ports per connection).
- * Added notification on insertion and removal of what port the
- * device is/was connected to (and what kind of device it was).
- *
- * version 0.2.2 (12/16/99) gkh
- * Changed major number to the new allocated number. We're legal now!
- *
- * version 0.2.1 (12/14/99) gkh
- * Fixed bug that happens when device node is opened when there isn't a
- * device attached to it. Thanks to marek@webdesign.no for noticing this.
- *
- * version 0.2.0 (11/10/99) gkh
- * Split up internals to make it easier to add different types of serial
- * converters to the code.
- * Added a "generic" driver that gets it's vendor and product id
- * from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
- * for the idea and sample code (from the usb scanner driver.)
- * Cleared up any licensing questions by releasing it under the GNU GPL.
- *
- * version 0.1.2 (10/25/99) gkh
- * Fixed bug in detecting device.
- *
- * version 0.1.1 (10/05/99) gkh
- * Changed the major number to not conflict with anything else.
- *
- * version 0.1 (09/28/99) gkh
- * Can recognize the two different devices and start up a read from
- * device when asked to. Writes also work. No control signals yet, this
- * all is vendor specific data (i.e. no spec), also no control for
- * different baud rates or other bit settings.
- * Currently we are using the same devid as the acm driver. This needs
- * to change.
- *
*/
#include <linux/config.h>
diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
index 4ca5e0c..1cedc19 100644
--- a/drivers/usb/serial/usb-serial.h
+++ b/drivers/usb/serial/usb-serial.h
@@ -1,53 +1,13 @@
/*
* USB Serial Converter driver
*
- * Copyright (C) 1999 - 2004
+ * Copyright (C) 1999 - 2005
* Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- *
- * (03/26/2002) gkh
- * removed the port->tty check from port_paranoia_check() due to serial
- * consoles not having a tty device assigned to them.
- *
- * (12/03/2001) gkh
- * removed active from the port structure.
- * added documentation to the usb_serial_device_type structure
- *
- * (10/10/2001) gkh
- * added vendor and product to serial structure. Needed to determine device
- * owner when the device is disconnected.
- *
- * (05/30/2001) gkh
- * added sem to port structure and removed port_lock
- *
- * (10/05/2000) gkh
- * Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
- * fix bug with urb->dev not being set properly, now that the usb core
- * needs it.
- *
- * (09/11/2000) gkh
- * Added usb_serial_debug_data function to help get rid of #DEBUG in the
- * drivers.
- *
- * (08/28/2000) gkh
- * Added port_lock to port structure.
- *
- * (08/08/2000) gkh
- * Added open_count to port structure.
- *
- * (07/23/2000) gkh
- * Added bulk_out_endpointAddress to port structure.
- *
- * (07/19/2000) gkh, pberger, and borchers
- * Modifications to allow usb-serial drivers to be modules.
- *
- *
*/
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 0ac0377..39ad0ca 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -7,139 +7,10 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
- * (06/03/2003) Judd Montgomery <judd at jpilot.org>
- * Added support for module parameter options for untested/unknown
- * devices.
- *
- * (03/09/2003) gkh
- * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
- * <brachtl@redgrep.cz> for the information.
- *
- * (03/05/2003) gkh
- * Think Treo support is now working.
- *
- * (04/03/2002) gkh
- * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
- * <hiro@zob.ne.jp> for the information.
- *
- * (03/27/2002) gkh
- * Removed assumptions that port->tty was always valid (is not true
- * for usb serial console devices.)
- *
- * (03/23/2002) gkh
- * Added support for the Palm i705 device, thanks to Thomas Riemer
- * <tom@netmech.com> for the information.
- *
- * (03/21/2002) gkh
- * Added support for the Palm m130 device, thanks to Udo Eisenbarth
- * <udo.eisenbarth@web.de> for the information.
- *
- * (02/27/2002) gkh
- * Reworked the urb handling logic. We have no more pool, but dynamically
- * allocate the urb and the transfer buffer on the fly. In testing this
- * does not incure any measurable overhead. This also relies on the fact
- * that we have proper reference counting logic for urbs.
- *
- * (02/21/2002) SilaS
- * Added initial support for the Palm m515 devices.
- *
- * (02/14/2002) gkh
- * Added support for the Clie S-360 device.
- *
- * (12/18/2001) gkh
- * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
- * for the patch.
- *
- * (11/11/2001) gkh
- * Added support for the m125 devices, and added check to prevent oopses
- * for Clié devices that lie about the number of ports they have.
- *
- * (08/30/2001) gkh
- * Added support for the Clie devices, both the 3.5 and 4.0 os versions.
- * Many thanks to Daniel Burke, and Bryan Payne for helping with this.
- *
- * (08/23/2001) gkh
- * fixed a few potential bugs pointed out by Oliver Neukum.
- *
- * (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of problems.
- *
- * (05/28/2000) gkh
- * Added initial support for the Palm m500 and Palm m505 devices.
- *
- * (04/08/2001) gb
- * Identify version on module load.
- *
- * (01/21/2000) gkh
- * Added write_room and chars_in_buffer, as they were previously using the
- * generic driver versions which is all wrong now that we are using an urb
- * pool. Thanks to Wolfgang Grandegger for pointing this out to me.
- * Removed count assignment in the write function, which was not needed anymore
- * either. Thanks to Al Borchers for pointing this out.
- *
- * (12/12/2000) gkh
- * Moved MOD_DEC to end of visor_close to be nicer, as the final write
- * message can sleep.
- *
- * (11/12/2000) gkh
- * Fixed bug with data being dropped on the floor by forcing tty->low_latency
- * to be on. Hopefully this fixes the OHCI issue!
- *
- * (11/01/2000) Adam J. Richter
- * usb_device_id table support
- *
- * (10/05/2000) gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- *
- * (09/11/2000) gkh
- * Got rid of always calling kmalloc for every urb we wrote out to the
- * device.
- * Added visor_read_callback so we can keep track of bytes in and out for
- * those people who like to know the speed of their device.
- * Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (09/06/2000) gkh
- * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
- * the host controller drivers set urb->dev = NULL when the urb is finished.
- *
- * (08/28/2000) gkh
- * Added locks for SMP safeness.
- *
- * (08/08/2000) gkh
- * Fixed endian problem in visor_startup.
- * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
- * than once.
- *
- * (07/23/2000) gkh
- * Added pool of write urbs to speed up transfers to the visor.
- *
- * (07/19/2000) gkh
- * Added module_init and module_exit functions to handle the fact that this
- * driver is a loadable module now.
- *
- * (07/03/2000) gkh
- * Added visor_set_ioctl and visor_set_termios functions (they don't do much
- * of anything, but are good for debugging.)
- *
- * (06/25/2000) gkh
- * Fixed bug in visor_unthrottle that should help with the disconnect in PPP
- * bug that people have been reporting.
- *
- * (06/23/2000) gkh
- * Cleaned up debugging statements in a quest to find UHCI timeout bug.
- *
- * (04/27/2000) Ryan VanderBijl
- * Fixed memory leak in visor_close
- *
- * (03/26/2000) gkh
- * Split driver up into device specific pieces.
- *
*/
#include <linux/config.h>