Change example launcher to use unsigned long not u32
Apply Clue 2x4 to lguest userland<->kernel handling code and the
lguest launcher. Pointers are not to be passed in u32's!
Basic rule of thumb: Anything passing u32's back and forth should be
passing unsigned longs to be portable to 64 bit archs.
For those who forgotten already, I repeat: NO POINTERS IN u32!
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 140bd98..4950b03 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -473,9 +473,9 @@
unsigned long initrd_size,
unsigned long page_offset)
{
- u32 *pgdir, *linear;
+ unsigned long *pgdir, *linear;
unsigned int mapped_pages, i, linear_pages;
- unsigned int ptes_per_page = getpagesize()/sizeof(u32);
+ unsigned int ptes_per_page = getpagesize()/sizeof(void *);
/* Ideally we map all physical memory starting at page_offset.
* However, if page_offset is 0xC0000000 we can only map 1G of physical
@@ -505,7 +505,7 @@
* continue from there. */
for (i = 0; i < mapped_pages; i += ptes_per_page) {
pgdir[(i + page_offset/getpagesize())/ptes_per_page]
- = ((to_guest_phys(linear) + i*sizeof(u32))
+ = ((to_guest_phys(linear) + i*sizeof(void *))
| PAGE_PRESENT);
}
@@ -537,12 +537,13 @@
* the base of guest "physical" memory, the top physical page to allow, the
* top level pagetable, the entry point and the page_offset constant for the
* Guest. */
-static int tell_kernel(u32 pgdir, u32 start, u32 page_offset)
+static int tell_kernel(unsigned long pgdir, unsigned long start,
+ unsigned long page_offset)
{
- u32 args[] = { LHREQ_INITIALIZE,
- (unsigned long)guest_base,
- guest_limit / getpagesize(),
- pgdir, start, page_offset };
+ unsigned long args[] = { LHREQ_INITIALIZE,
+ (unsigned long)guest_base,
+ guest_limit / getpagesize(),
+ pgdir, start, page_offset };
int fd;
verbose("Guest: %p - %p (%#lx)\n",
@@ -586,7 +587,7 @@
for (;;) {
fd_set rfds = devices->infds;
- u32 args[] = { LHREQ_BREAK, 1 };
+ unsigned long args[] = { LHREQ_BREAK, 1 };
/* Wait until input is ready from one of the devices. */
select(devices->max_infd+1, &rfds, NULL, NULL, NULL);
@@ -684,7 +685,7 @@
static u32 *get_dma_buffer(int fd, void *key,
struct iovec iov[], unsigned int *num, u32 *irq)
{
- u32 buf[] = { LHREQ_GETDMA, to_guest_phys(key) };
+ unsigned long buf[] = { LHREQ_GETDMA, to_guest_phys(key) };
unsigned long udma;
u32 *res;
@@ -705,7 +706,7 @@
/* This is a convenient routine to send the Guest an interrupt. */
static void trigger_irq(int fd, u32 irq)
{
- u32 buf[] = { LHREQ_IRQ, irq };
+ unsigned long buf[] = { LHREQ_IRQ, irq };
if (write(fd, buf, sizeof(buf)) != 0)
err(1, "Triggering irq %i", irq);
}
@@ -787,7 +788,7 @@
struct timeval now;
gettimeofday(&now, NULL);
if (now.tv_sec <= abort->start.tv_sec+1) {
- u32 args[] = { LHREQ_BREAK, 0 };
+ unsigned long args[] = { LHREQ_BREAK, 0 };
/* Close the fd so Waker will know it has to
* exit. */
close(waker_fd);
@@ -1365,7 +1366,7 @@
run_guest(int lguest_fd, struct device_list *device_list)
{
for (;;) {
- u32 args[] = { LHREQ_BREAK, 0 };
+ unsigned long args[] = { LHREQ_BREAK, 0 };
unsigned long arr[2];
int readval;
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 5632ed8..d4ac5f8 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -43,7 +43,7 @@
/*L:310 To send DMA into the Guest, the Launcher needs to be able to ask for a
* DMA buffer. This is done by writing LHREQ_GETDMA and the key to
* /dev/lguest. */
-static long user_get_dma(struct lguest *lg, const u32 __user *input)
+static long user_get_dma(struct lguest *lg, const unsigned long __user *input)
{
unsigned long key, udma, irq;
@@ -67,7 +67,7 @@
/*L:315 To force the Guest to stop running and return to the Launcher, the
* Waker sets writes LHREQ_BREAK and the value "1" to /dev/lguest. The
* Launcher then writes LHREQ_BREAK and "0" to release the Waker. */
-static int break_guest_out(struct lguest *lg, const u32 __user *input)
+static int break_guest_out(struct lguest *lg, const unsigned long __user *input)
{
unsigned long on;
@@ -90,9 +90,9 @@
/*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
* number to /dev/lguest. */
-static int user_send_irq(struct lguest *lg, const u32 __user *input)
+static int user_send_irq(struct lguest *lg, const unsigned long __user *input)
{
- u32 irq;
+ unsigned long irq;
if (get_user(irq, input) != 0)
return -EFAULT;
@@ -142,8 +142,8 @@
return run_guest(lg, (unsigned long __user *)user);
}
-/*L:020 The initialization write supplies 5 32-bit values (in addition to the
- * 32-bit LHREQ_INITIALIZE value). These are:
+/*L:020 The initialization write supplies 5 pointer sized (32 or 64 bit)
+ * values (in addition to the LHREQ_INITIALIZE value). These are:
*
* base: The start of the Guest-physical memory inside the Launcher memory.
*
@@ -162,13 +162,13 @@
* quickly converted from physical to virtual by adding PAGE_OFFSET. It's
* 0xC0000000 (3G) by default, but it's configurable at kernel build time.
*/
-static int initialize(struct file *file, const u32 __user *input)
+static int initialize(struct file *file, const unsigned long __user *input)
{
/* "struct lguest" contains everything we (the Host) know about a
* Guest. */
struct lguest *lg;
int err;
- u32 args[5];
+ unsigned long args[5];
/* We grab the Big Lguest lock, which protects against multiple
* simultaneous initializations. */
@@ -259,17 +259,18 @@
* start with a 32 bit number: for the first write this must be
* LHREQ_INITIALIZE to set up the Guest. After that the Launcher can use
* writes of other values to get DMA buffers and send interrupts. */
-static ssize_t write(struct file *file, const char __user *input,
+static ssize_t write(struct file *file, const char __user *in,
size_t size, loff_t *off)
{
/* Once the guest is initialized, we hold the "struct lguest" in the
* file private data. */
struct lguest *lg = file->private_data;
- u32 req;
+ const unsigned long __user *input = (const unsigned long __user *)in;
+ unsigned long req;
if (get_user(req, input) != 0)
return -EFAULT;
- input += sizeof(req);
+ input++;
/* If you haven't initialized, you must do that first. */
if (req != LHREQ_INITIALIZE && !lg)
@@ -285,13 +286,13 @@
switch (req) {
case LHREQ_INITIALIZE:
- return initialize(file, (const u32 __user *)input);
+ return initialize(file, input);
case LHREQ_GETDMA:
- return user_get_dma(lg, (const u32 __user *)input);
+ return user_get_dma(lg, input);
case LHREQ_IRQ:
- return user_send_irq(lg, (const u32 __user *)input);
+ return user_send_irq(lg, input);
case LHREQ_BREAK:
- return break_guest_out(lg, (const u32 __user *)input);
+ return break_guest_out(lg, input);
default:
return -EINVAL;
}