| /* |
| * include/linux/tipc_config.h: Include file for TIPC configuration interface |
| * |
| * Copyright (c) 2003-2006, Ericsson AB |
| * Copyright (c) 2005-2007, Wind River Systems |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the names of the copyright holders nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef _LINUX_TIPC_CONFIG_H_ |
| #define _LINUX_TIPC_CONFIG_H_ |
| |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <asm/byteorder.h> |
| |
| /* |
| * Configuration |
| * |
| * All configuration management messaging involves sending a request message |
| * to the TIPC configuration service on a node, which sends a reply message |
| * back. (In the future multi-message replies may be supported.) |
| * |
| * Both request and reply messages consist of a transport header and payload. |
| * The transport header contains info about the desired operation; |
| * the payload consists of zero or more type/length/value (TLV) items |
| * which specify parameters or results for the operation. |
| * |
| * For many operations, the request and reply messages have a fixed number |
| * of TLVs (usually zero or one); however, some reply messages may return |
| * a variable number of TLVs. A failed request is denoted by the presence |
| * of an "error string" TLV in the reply message instead of the TLV(s) the |
| * reply should contain if the request succeeds. |
| */ |
| |
| /* |
| * Public commands: |
| * May be issued by any process. |
| * Accepted by own node, or by remote node only if remote management enabled. |
| */ |
| |
| #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ |
| #define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */ |
| #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ |
| #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ |
| #define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */ |
| #define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */ |
| #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ |
| #define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */ |
| #define TIPC_CMD_SHOW_STATS 0x000F /* tx unsigned, rx ultra_string */ |
| |
| #if 0 |
| #define TIPC_CMD_SHOW_PORT_STATS 0x0008 /* tx port_ref, rx ultra_string */ |
| #define TIPC_CMD_RESET_PORT_STATS 0x0009 /* tx port_ref, rx none */ |
| #define TIPC_CMD_GET_ROUTES 0x000A /* tx ?, rx ? */ |
| #define TIPC_CMD_GET_LINK_PEER 0x000D /* tx link_name, rx ? */ |
| #endif |
| |
| /* |
| * Protected commands: |
| * May only be issued by "network administration capable" process. |
| * Accepted by own node, or by remote node only if remote management enabled |
| * and this node is zone manager. |
| */ |
| |
| #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ |
| #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ |
| #define TIPC_CMD_GET_MAX_PUBL 0x4005 /* tx none, rx unsigned */ |
| #define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* tx none, rx unsigned */ |
| #define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */ |
| #define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* tx none, rx unsigned */ |
| #define TIPC_CMD_GET_MAX_NODES 0x4009 /* tx none, rx unsigned */ |
| #define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */ |
| #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ |
| |
| #define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */ |
| #define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */ |
| #define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */ |
| #define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */ |
| #define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */ |
| #define TIPC_CMD_SET_LOG_SIZE 0x410A /* tx unsigned, rx none */ |
| #define TIPC_CMD_DUMP_LOG 0x410B /* tx none, rx ultra_string */ |
| #define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */ |
| |
| #if 0 |
| #define TIPC_CMD_CREATE_LINK 0x4103 /* tx link_create, rx none */ |
| #define TIPC_CMD_REMOVE_LINK 0x4104 /* tx link_name, rx none */ |
| #define TIPC_CMD_BLOCK_LINK 0x4105 /* tx link_name, rx none */ |
| #define TIPC_CMD_UNBLOCK_LINK 0x4106 /* tx link_name, rx none */ |
| #endif |
| |
| /* |
| * Private commands: |
| * May only be issued by "network administration capable" process. |
| * Accepted by own node only; cannot be used on a remote node. |
| */ |
| |
| #define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */ |
| #if 0 |
| #define TIPC_CMD_SET_ZONE_MASTER 0x8002 /* tx none, rx none */ |
| #endif |
| #define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */ |
| #define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */ |
| #define TIPC_CMD_SET_MAX_PUBL 0x8005 /* tx unsigned, rx none */ |
| #define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* tx unsigned, rx none */ |
| #define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */ |
| #define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* tx unsigned, rx none */ |
| #define TIPC_CMD_SET_MAX_NODES 0x8009 /* tx unsigned, rx none */ |
| #define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */ |
| #define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */ |
| |
| /* |
| * Reserved commands: |
| * May not be issued by any process. |
| * Used internally by TIPC. |
| */ |
| |
| #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ |
| |
| /* |
| * TLV types defined for TIPC |
| */ |
| |
| #define TIPC_TLV_NONE 0 /* no TLV present */ |
| #define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/ |
| #define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */ |
| #define TIPC_TLV_STRING 3 /* char[128] (max) */ |
| #define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */ |
| #define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */ |
| |
| #define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */ |
| #define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */ |
| #define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */ |
| #define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */ |
| #define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */ |
| #define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */ |
| #define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */ |
| #define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */ |
| #define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */ |
| #define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */ |
| #define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ |
| |
| /* |
| * Maximum sizes of TIPC bearer-related names (including terminating NUL) |
| */ |
| |
| #define TIPC_MAX_MEDIA_NAME 16 /* format = media */ |
| #define TIPC_MAX_IF_NAME 16 /* format = interface */ |
| #define TIPC_MAX_BEARER_NAME 32 /* format = media:interface */ |
| #define TIPC_MAX_LINK_NAME 60 /* format = Z.C.N:interface-Z.C.N:interface */ |
| |
| /* |
| * Link priority limits (min, default, max, media default) |
| */ |
| |
| #define TIPC_MIN_LINK_PRI 0 |
| #define TIPC_DEF_LINK_PRI 10 |
| #define TIPC_MAX_LINK_PRI 31 |
| #define TIPC_MEDIA_LINK_PRI (TIPC_MAX_LINK_PRI + 1) |
| |
| /* |
| * Link tolerance limits (min, default, max), in ms |
| */ |
| |
| #define TIPC_MIN_LINK_TOL 50 |
| #define TIPC_DEF_LINK_TOL 1500 |
| #define TIPC_MAX_LINK_TOL 30000 |
| |
| /* |
| * Link window limits (min, default, max), in packets |
| */ |
| |
| #define TIPC_MIN_LINK_WIN 16 |
| #define TIPC_DEF_LINK_WIN 50 |
| #define TIPC_MAX_LINK_WIN 150 |
| |
| |
| struct tipc_node_info { |
| __be32 addr; /* network address of node */ |
| __be32 up; /* 0=down, 1= up */ |
| }; |
| |
| struct tipc_link_info { |
| __be32 dest; /* network address of peer node */ |
| __be32 up; /* 0=down, 1=up */ |
| char str[TIPC_MAX_LINK_NAME]; /* link name */ |
| }; |
| |
| struct tipc_bearer_config { |
| __be32 priority; /* Range [1,31]. Override per link */ |
| __be32 detect_scope; |
| char name[TIPC_MAX_BEARER_NAME]; |
| }; |
| |
| struct tipc_link_config { |
| __be32 value; |
| char name[TIPC_MAX_LINK_NAME]; |
| }; |
| |
| #define TIPC_NTQ_ALLTYPES 0x80000000 |
| |
| struct tipc_name_table_query { |
| __be32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */ |
| __be32 type; /* {t,l,u} info ignored if high bit of "depth" is set */ |
| __be32 lowbound; /* (i.e. displays all entries of name table) */ |
| __be32 upbound; |
| }; |
| |
| /* |
| * The error string TLV is a null-terminated string describing the cause |
| * of the request failure. To simplify error processing (and to save space) |
| * the first character of the string can be a special error code character |
| * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason. |
| */ |
| |
| #define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */ |
| #define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */ |
| #define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */ |
| #define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */ |
| #define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */ |
| #define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */ |
| |
| #if 0 |
| /* prototypes TLV structures for proposed commands */ |
| struct tipc_link_create { |
| __u32 domain; |
| struct tipc_media_addr peer_addr; |
| char bearer_name[TIPC_MAX_BEARER_NAME]; |
| }; |
| #endif |
| |
| /* |
| * A TLV consists of a descriptor, followed by the TLV value. |
| * TLV descriptor fields are stored in network byte order; |
| * TLV values must also be stored in network byte order (where applicable). |
| * TLV descriptors must be aligned to addresses which are multiple of 4, |
| * so up to 3 bytes of padding may exist at the end of the TLV value area. |
| * There must not be any padding between the TLV descriptor and its value. |
| */ |
| |
| struct tlv_desc { |
| __be16 tlv_len; /* TLV length (descriptor + value) */ |
| __be16 tlv_type; /* TLV identifier */ |
| }; |
| |
| #define TLV_ALIGNTO 4 |
| |
| #define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1)) |
| #define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen)) |
| #define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen))) |
| #define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0))) |
| |
| static inline int TLV_OK(const void *tlv, __u16 space) |
| { |
| /* |
| * Would also like to check that "tlv" is a multiple of 4, |
| * but don't know how to do this in a portable way. |
| * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler |
| * won't allow binary "&" with a pointer. |
| * - Tried casting "tlv" to integer type, but causes warning about size |
| * mismatch when pointer is bigger than chosen type (int, long, ...). |
| */ |
| |
| return (space >= TLV_SPACE(0)) && |
| (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space); |
| } |
| |
| static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type) |
| { |
| return TLV_OK(tlv, space) && |
| (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type); |
| } |
| |
| static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) |
| { |
| struct tlv_desc *tlv_ptr; |
| int tlv_len; |
| |
| tlv_len = TLV_LENGTH(len); |
| tlv_ptr = (struct tlv_desc *)tlv; |
| tlv_ptr->tlv_type = htons(type); |
| tlv_ptr->tlv_len = htons(tlv_len); |
| if (len && data) |
| memcpy(TLV_DATA(tlv_ptr), data, tlv_len); |
| return TLV_SPACE(len); |
| } |
| |
| /* |
| * A TLV list descriptor simplifies processing of messages |
| * containing multiple TLVs. |
| */ |
| |
| struct tlv_list_desc { |
| struct tlv_desc *tlv_ptr; /* ptr to current TLV */ |
| __u32 tlv_space; /* # bytes from curr TLV to list end */ |
| }; |
| |
| static inline void TLV_LIST_INIT(struct tlv_list_desc *list, |
| void *data, __u32 space) |
| { |
| list->tlv_ptr = (struct tlv_desc *)data; |
| list->tlv_space = space; |
| } |
| |
| static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list) |
| { |
| return (list->tlv_space == 0); |
| } |
| |
| static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type) |
| { |
| return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type); |
| } |
| |
| static inline void *TLV_LIST_DATA(struct tlv_list_desc *list) |
| { |
| return TLV_DATA(list->tlv_ptr); |
| } |
| |
| static inline void TLV_LIST_STEP(struct tlv_list_desc *list) |
| { |
| __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len)); |
| |
| list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); |
| list->tlv_space -= tlv_space; |
| } |
| |
| /* |
| * Configuration messages exchanged via NETLINK_GENERIC use the following |
| * family id, name, version and command. |
| */ |
| #define TIPC_GENL_NAME "TIPC" |
| #define TIPC_GENL_VERSION 0x1 |
| #define TIPC_GENL_CMD 0x1 |
| |
| /* |
| * TIPC specific header used in NETLINK_GENERIC requests. |
| */ |
| struct tipc_genlmsghdr { |
| __u32 dest; /* Destination address */ |
| __u16 cmd; /* Command */ |
| __u16 reserved; /* Unused */ |
| }; |
| |
| #define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr)) |
| |
| /* |
| * Configuration messages exchanged via TIPC sockets use the TIPC configuration |
| * message header, which is defined below. This structure is analogous |
| * to the Netlink message header, but fields are stored in network byte order |
| * and no padding is permitted between the header and the message data |
| * that follows. |
| */ |
| |
| struct tipc_cfg_msg_hdr |
| { |
| __be32 tcm_len; /* Message length (including header) */ |
| __be16 tcm_type; /* Command type */ |
| __be16 tcm_flags; /* Additional flags */ |
| char tcm_reserved[8]; /* Unused */ |
| }; |
| |
| #define TCM_F_REQUEST 0x1 /* Flag: Request message */ |
| #define TCM_F_MORE 0x2 /* Flag: Message to be continued */ |
| |
| #define TCM_ALIGN(datalen) (((datalen)+3) & ~3) |
| #define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen) |
| #define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen))) |
| #define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0))) |
| |
| static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags, |
| void *data, __u16 data_len) |
| { |
| struct tipc_cfg_msg_hdr *tcm_hdr; |
| int msg_len; |
| |
| msg_len = TCM_LENGTH(data_len); |
| tcm_hdr = (struct tipc_cfg_msg_hdr *)msg; |
| tcm_hdr->tcm_len = htonl(msg_len); |
| tcm_hdr->tcm_type = htons(cmd); |
| tcm_hdr->tcm_flags = htons(flags); |
| if (data_len && data) |
| memcpy(TCM_DATA(msg), data, data_len); |
| return TCM_SPACE(data_len); |
| } |
| |
| #endif |