arch/arm/mach-s3c2440/mach-rx1950.c - fp2-dev/kernel/msm - Gitiles

 /* linux/arch/arm/mach-s3c2440/mach-rx1950.c
  *
  * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
  * Copyright (c) 2007-2010 Vasily Khoruzhick
  *
  * based on smdk2440 written by Ben Dooks
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
 */

 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/memblock.h>
 #include <linux/delay.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/device.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 #include <linux/pwm.h>
 #include <linux/s3c_adc_battery.h>
 #include <linux/leds.h>
 #include <linux/i2c.h>

 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>

 #include <linux/mmc/host.h>

 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>

 #include <mach/regs-gpio.h>
 #include <mach/regs-gpioj.h>
 #include <mach/regs-lcd.h>
 #include <mach/h1940.h>
 #include <mach/fb.h>

 #include <plat/clock.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-iic.h>
 #include <plat/mci.h>
 #include <plat/udc.h>
 #include <plat/nand.h>
 #include <plat/iic.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/irq.h>
 #include <plat/ts.h>

 #include <sound/uda1380.h>

 #include "common.h"

 #define LCD_PWM_PERIOD 192960
 #define LCD_PWM_DUTY 127353

 static struct map_desc rx1950_iodesc[] __initdata = {
 };

 static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
 	[0] = {
 	       .hwport = 0,
 	       .flags = 0,
 	       .ucon = 0x3c5,
 	       .ulcon = 0x03,
 	       .ufcon = 0x51,
 		.clk_sel = S3C2410_UCON_CLKSEL3,
 	},
 	[1] = {
 	       .hwport = 1,
 	       .flags = 0,
 	       .ucon = 0x3c5,
 	       .ulcon = 0x03,
 	       .ufcon = 0x51,
 		.clk_sel = S3C2410_UCON_CLKSEL3,
 	},
 	/* IR port */
 	[2] = {
 	       .hwport = 2,
 	       .flags = 0,
 	       .ucon = 0x3c5,
 	       .ulcon = 0x43,
 	       .ufcon = 0xf1,
 		.clk_sel = S3C2410_UCON_CLKSEL3,
 	},
 };

 static struct s3c2410fb_display rx1950_display = {
 	.type = S3C2410_LCDCON1_TFT,
 	.width = 240,
 	.height = 320,
 	.xres = 240,
 	.yres = 320,
 	.bpp = 16,

 	.pixclock = 260000,
 	.left_margin = 10,
 	.right_margin = 20,
 	.hsync_len = 10,
 	.upper_margin = 2,
 	.lower_margin = 2,
 	.vsync_len = 2,

 	.lcdcon5 = S3C2410_LCDCON5_FRM565 |
 			   S3C2410_LCDCON5_INVVCLK |
 			   S3C2410_LCDCON5_INVVLINE |
 			   S3C2410_LCDCON5_INVVFRAME |
 			   S3C2410_LCDCON5_HWSWP |
 			   (0x02 << 13) |
 			   (0x02 << 15),

 };

 static int power_supply_init(struct device *dev)
 {
 	return gpio_request(S3C2410_GPF(2), "cable plugged");
 }

 static int rx1950_is_ac_online(void)
 {
 	return !gpio_get_value(S3C2410_GPF(2));
 }

 static void power_supply_exit(struct device *dev)
 {
 	gpio_free(S3C2410_GPF(2));
 }

 static char *rx1950_supplicants[] = {
 	"main-battery"
 };

 static struct pda_power_pdata power_supply_info = {
 	.init			= power_supply_init,
 	.is_ac_online		= rx1950_is_ac_online,
 	.exit			= power_supply_exit,
 	.supplied_to		= rx1950_supplicants,
 	.num_supplicants	= ARRAY_SIZE(rx1950_supplicants),
 };

 static struct resource power_supply_resources[] = {
 	[0] = {
 			.name	= "ac",
 			.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE |
 					  IORESOURCE_IRQ_HIGHEDGE,
 			.start	= IRQ_EINT2,
 			.end	= IRQ_EINT2,
 	},
 };

 static struct platform_device power_supply = {
 	.name			= "pda-power",
 	.id			= -1,
 	.dev			= {
 					.platform_data =
 						&power_supply_info,
 	},
 	.resource		= power_supply_resources,
 	.num_resources		= ARRAY_SIZE(power_supply_resources),
 };

 static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
 	{ .volt = 4100, .cur = 156, .level = 100},
 	{ .volt = 4050, .cur = 156, .level = 95},
 	{ .volt = 4025, .cur = 141, .level = 90},
 	{ .volt = 3995, .cur = 144, .level = 85},
 	{ .volt = 3957, .cur = 162, .level = 80},
 	{ .volt = 3931, .cur = 147, .level = 75},
 	{ .volt = 3902, .cur = 147, .level = 70},
 	{ .volt = 3863, .cur = 153, .level = 65},
 	{ .volt = 3838, .cur = 150, .level = 60},
 	{ .volt = 3800, .cur = 153, .level = 55},
 	{ .volt = 3765, .cur = 153, .level = 50},
 	{ .volt = 3748, .cur = 172, .level = 45},
 	{ .volt = 3740, .cur = 153, .level = 40},
 	{ .volt = 3714, .cur = 175, .level = 35},
 	{ .volt = 3710, .cur = 156, .level = 30},
 	{ .volt = 3963, .cur = 156, .level = 25},
 	{ .volt = 3672, .cur = 178, .level = 20},
 	{ .volt = 3651, .cur = 178, .level = 15},
 	{ .volt = 3629, .cur = 178, .level = 10},
 	{ .volt = 3612, .cur = 162, .level = 5},
 	{ .volt = 3605, .cur = 162, .level = 0},
 };

 static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
 	{ .volt = 4200, .cur = 0, .level = 100},
 	{ .volt = 4190, .cur = 0, .level = 99},
 	{ .volt = 4178, .cur = 0, .level = 95},
 	{ .volt = 4110, .cur = 0, .level = 70},
 	{ .volt = 4076, .cur = 0, .level = 65},
 	{ .volt = 4046, .cur = 0, .level = 60},
 	{ .volt = 4021, .cur = 0, .level = 55},
 	{ .volt = 3999, .cur = 0, .level = 50},
 	{ .volt = 3982, .cur = 0, .level = 45},
 	{ .volt = 3965, .cur = 0, .level = 40},
 	{ .volt = 3957, .cur = 0, .level = 35},
 	{ .volt = 3948, .cur = 0, .level = 30},
 	{ .volt = 3936, .cur = 0, .level = 25},
 	{ .volt = 3927, .cur = 0, .level = 20},
 	{ .volt = 3906, .cur = 0, .level = 15},
 	{ .volt = 3880, .cur = 0, .level = 10},
 	{ .volt = 3829, .cur = 0, .level = 5},
 	{ .volt = 3820, .cur = 0, .level = 0},
 };

 int rx1950_bat_init(void)
 {
 	int ret;

 	ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
 	if (ret)
 		goto err_gpio1;
 	ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
 	if (ret)
 		goto err_gpio2;

 	return 0;

 err_gpio2:
 	gpio_free(S3C2410_GPJ(2));
 err_gpio1:
 	return ret;
 }

 void rx1950_bat_exit(void)
 {
 	gpio_free(S3C2410_GPJ(2));
 	gpio_free(S3C2410_GPJ(3));
 }

 void rx1950_enable_charger(void)
 {
 	gpio_direction_output(S3C2410_GPJ(2), 1);
 	gpio_direction_output(S3C2410_GPJ(3), 1);
 }

 void rx1950_disable_charger(void)
 {
 	gpio_direction_output(S3C2410_GPJ(2), 0);
 	gpio_direction_output(S3C2410_GPJ(3), 0);
 }

 DEFINE_SPINLOCK(rx1950_blink_spin);

 static int rx1950_led_blink_set(unsigned gpio, int state,
 	unsigned long *delay_on, unsigned long *delay_off)
 {
 	int blink_gpio, check_gpio;

 	switch (gpio) {
 	case S3C2410_GPA(6):
 		blink_gpio = S3C2410_GPA(4);
 		check_gpio = S3C2410_GPA(3);
 		break;
 	case S3C2410_GPA(7):
 		blink_gpio = S3C2410_GPA(3);
 		check_gpio = S3C2410_GPA(4);
 		break;
 	default:
 		return -EINVAL;
 		break;
 	}

 	if (delay_on && delay_off && !*delay_on && !*delay_off)
 		*delay_on = *delay_off = 500;

 	spin_lock(&rx1950_blink_spin);

 	switch (state) {
 	case GPIO_LED_NO_BLINK_LOW:
 	case GPIO_LED_NO_BLINK_HIGH:
 		if (!gpio_get_value(check_gpio))
 			gpio_set_value(S3C2410_GPJ(6), 0);
 		gpio_set_value(blink_gpio, 0);
 		gpio_set_value(gpio, state);
 		break;
 	case GPIO_LED_BLINK:
 		gpio_set_value(gpio, 0);
 		gpio_set_value(S3C2410_GPJ(6), 1);
 		gpio_set_value(blink_gpio, 1);
 		break;
 	}

 	spin_unlock(&rx1950_blink_spin);

 	return 0;
 }

 static struct gpio_led rx1950_leds_desc[] = {
 	{
 		.name			= "Green",
 		.default_trigger	= "main-battery-full",
 		.gpio			= S3C2410_GPA(6),
 		.retain_state_suspended	= 1,
 	},
 	{
 		.name			= "Red",
 		.default_trigger
 			= "main-battery-charging-blink-full-solid",
 		.gpio			= S3C2410_GPA(7),
 		.retain_state_suspended	= 1,
 	},
 	{
 		.name			= "Blue",
 		.default_trigger	= "rx1950-acx-mem",
 		.gpio			= S3C2410_GPA(11),
 		.retain_state_suspended	= 1,
 	},
 };

 static struct gpio_led_platform_data rx1950_leds_pdata = {
 	.num_leds	= ARRAY_SIZE(rx1950_leds_desc),
 	.leds		= rx1950_leds_desc,
 	.gpio_blink_set	= rx1950_led_blink_set,
 };

 static struct platform_device rx1950_leds = {
 	.name	= "leds-gpio",
 	.id		= -1,
 	.dev	= {
 				.platform_data = &rx1950_leds_pdata,
 	},
 };

 static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
 	.init = rx1950_bat_init,
 	.exit = rx1950_bat_exit,
 	.enable_charger = rx1950_enable_charger,
 	.disable_charger = rx1950_disable_charger,
 	.gpio_charge_finished = S3C2410_GPF(3),
 	.lut_noac = bat_lut_noac,
 	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
 	.lut_acin = bat_lut_acin,
 	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
 	.volt_channel = 0,
 	.current_channel = 1,
 	.volt_mult = 4235,
 	.current_mult = 2900,
 	.internal_impedance = 200,
 };

 static struct platform_device rx1950_battery = {
 	.name             = "s3c-adc-battery",
 	.id               = -1,
 	.dev = {
 		.parent = &s3c_device_adc.dev,
 		.platform_data = &rx1950_bat_cfg,
 	},
 };

 static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
 	.displays = &rx1950_display,
 	.num_displays = 1,
 	.default_display = 0,

 	.lpcsel = 0x02,
 	.gpccon = 0xaa9556a9,
 	.gpccon_mask = 0xffc003fc,
 	.gpcup = 0x0000ffff,
 	.gpcup_mask = 0xffffffff,

 	.gpdcon = 0xaa90aaa1,
 	.gpdcon_mask = 0xffc0fff0,
 	.gpdup = 0x0000fcfd,
 	.gpdup_mask = 0xffffffff,

 };

 static struct pwm_device *lcd_pwm;

 void rx1950_lcd_power(int enable)
 {
 	int i;
 	static int enabled;
 	if (enabled == enable)
 		return;
 	if (!enable) {

 		/* GPC11-GPC15->OUTPUT */
 		for (i = 11; i < 16; i++)
 			gpio_direction_output(S3C2410_GPC(i), 1);

 		/* Wait a bit here... */
 		mdelay(100);

 		/* GPD2-GPD7->OUTPUT */
 		/* GPD11-GPD15->OUTPUT */
 		/* GPD2-GPD7->1, GPD11-GPD15->1 */
 		for (i = 2; i < 8; i++)
 			gpio_direction_output(S3C2410_GPD(i), 1);
 		for (i = 11; i < 16; i++)
 			gpio_direction_output(S3C2410_GPD(i), 1);

 		/* Wait a bit here...*/
 		mdelay(100);

 		/* GPB0->OUTPUT, GPB0->0 */
 		gpio_direction_output(S3C2410_GPB(0), 0);

 		/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
 		for (i = 1; i < 5; i++)
 			gpio_direction_output(S3C2410_GPC(i), 0);

 		/* GPC15-GPC11->0 */
 		for (i = 11; i < 16; i++)
 			gpio_direction_output(S3C2410_GPC(i), 0);

 		/* GPD15-GPD11->0, GPD2->GPD7->0 */
 		for (i = 11; i < 16; i++)
 			gpio_direction_output(S3C2410_GPD(i), 0);

 		for (i = 2; i < 8; i++)
 			gpio_direction_output(S3C2410_GPD(i), 0);

 		/* GPC6->0, GPC7->0, GPC5->0 */
 		gpio_direction_output(S3C2410_GPC(6), 0);
 		gpio_direction_output(S3C2410_GPC(7), 0);
 		gpio_direction_output(S3C2410_GPC(5), 0);

 		/* GPB1->OUTPUT, GPB1->0 */
 		gpio_direction_output(S3C2410_GPB(1), 0);
 		pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
 		pwm_disable(lcd_pwm);

 		/* GPC0->0, GPC10->0 */
 		gpio_direction_output(S3C2410_GPC(0), 0);
 		gpio_direction_output(S3C2410_GPC(10), 0);
 	} else {
 		pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
 		pwm_enable(lcd_pwm);

 		gpio_direction_output(S3C2410_GPC(0), 1);
 		gpio_direction_output(S3C2410_GPC(5), 1);

 		s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
 		gpio_direction_output(S3C2410_GPC(7), 1);

 		for (i = 1; i < 5; i++)
 			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));

 		for (i = 11; i < 16; i++)
 			s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));

 		for (i = 2; i < 8; i++)
 			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));

 		for (i = 11; i < 16; i++)
 			s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));

 		gpio_direction_output(S3C2410_GPC(10), 1);
 		gpio_direction_output(S3C2410_GPC(6), 1);
 	}
 	enabled = enable;
 }

 static void rx1950_bl_power(int enable)
 {
 	static int enabled;
 	if (enabled == enable)
 		return;
 	if (!enable) {
 			gpio_direction_output(S3C2410_GPB(0), 0);
 	} else {
 			/* LED driver need a "push" to power on */
 			gpio_direction_output(S3C2410_GPB(0), 1);
 			/* Warm up backlight for one period of PWM.
 			 * Without this trick its almost impossible to
 			 * enable backlight with low brightness value
 			 */
 			ndelay(48000);
 			s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
 	}
 	enabled = enable;
 }

 static int rx1950_backlight_init(struct device *dev)
 {
 	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
 	lcd_pwm = pwm_request(1, "RX1950 LCD");
 	if (IS_ERR(lcd_pwm)) {
 		dev_err(dev, "Unable to request PWM for LCD power!\n");
 		return PTR_ERR(lcd_pwm);
 	}

 	rx1950_lcd_power(1);
 	rx1950_bl_power(1);

 	return 0;
 }

 static void rx1950_backlight_exit(struct device *dev)
 {
 	rx1950_bl_power(0);
 	rx1950_lcd_power(0);

 	pwm_free(lcd_pwm);
 	gpio_free(S3C2410_GPB(0));
 }


 static int rx1950_backlight_notify(struct device *dev, int brightness)
 {
 	if (!brightness) {
 		rx1950_bl_power(0);
 		rx1950_lcd_power(0);
 	} else {
 		rx1950_lcd_power(1);
 		rx1950_bl_power(1);
 	}
 	return brightness;
 }

 static struct platform_pwm_backlight_data rx1950_backlight_data = {
 	.pwm_id = 0,
 	.max_brightness = 24,
 	.dft_brightness = 4,
 	.pwm_period_ns = 48000,
 	.init = rx1950_backlight_init,
 	.notify = rx1950_backlight_notify,
 	.exit = rx1950_backlight_exit,
 };

 static struct platform_device rx1950_backlight = {
 	.name = "pwm-backlight",
 	.dev = {
 		.parent = &s3c_device_timer[0].dev,
 		.platform_data = &rx1950_backlight_data,
 	},
 };

 static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
 {
 	switch (power_mode) {
 	case MMC_POWER_OFF:
 		gpio_direction_output(S3C2410_GPJ(1), 0);
 		break;
 	case MMC_POWER_UP:
 	case MMC_POWER_ON:
 		gpio_direction_output(S3C2410_GPJ(1), 1);
 		break;
 	default:
 		break;
 	}
 }

 static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
 	.gpio_detect = S3C2410_GPF(5),
 	.gpio_wprotect = S3C2410_GPH(8),
 	.set_power = rx1950_set_mmc_power,
 	.ocr_avail = MMC_VDD_32_33,
 };

 static struct mtd_partition rx1950_nand_part[] = {
 	[0] = {
 			.name = "Boot0",
 			.offset = 0,
 			.size = 0x4000,
 			.mask_flags = MTD_WRITEABLE,
 	},
 	[1] = {
 			.name = "Boot1",
 			.offset = MTDPART_OFS_APPEND,
 			.size = 0x40000,
 			.mask_flags = MTD_WRITEABLE,
 	},
 	[2] = {
 			.name = "Kernel",
 			.offset = MTDPART_OFS_APPEND,
 			.size = 0x300000,
 			.mask_flags = 0,
 	},
 	[3] = {
 			.name = "Filesystem",
 			.offset = MTDPART_OFS_APPEND,
 			.size = MTDPART_SIZ_FULL,
 			.mask_flags = 0,
 	},
 };

 static struct s3c2410_nand_set rx1950_nand_sets[] = {
 	[0] = {
 			.name = "Internal",
 			.nr_chips = 1,
 			.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
 			.partitions = rx1950_nand_part,
 	},
 };

 static struct s3c2410_platform_nand rx1950_nand_info = {
 	.tacls = 25,
 	.twrph0 = 50,
 	.twrph1 = 15,
 	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
 	.sets = rx1950_nand_sets,
 };

 static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
 	.vbus_pin = S3C2410_GPG(5),
 	.vbus_pin_inverted = 1,
 	.pullup_pin = S3C2410_GPJ(5),
 };

 static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
 	.delay = 10000,
 	.presc = 49,
 	.oversampling_shift = 3,
 };

 static struct gpio_keys_button rx1950_gpio_keys_table[] = {
 	{
 		.code		= KEY_POWER,
 		.gpio		= S3C2410_GPF(0),
 		.active_low	= 1,
 		.desc		= "Power button",
 		.wakeup		= 1,
 	},
 	{
 		.code		= KEY_F5,
 		.gpio		= S3C2410_GPF(7),
 		.active_low	= 1,
 		.desc		= "Record button",
 	},
 	{
 		.code		= KEY_F1,
 		.gpio		= S3C2410_GPG(0),
 		.active_low	= 1,
 		.desc		= "Calendar button",
 	},
 	{
 		.code		= KEY_F2,
 		.gpio		= S3C2410_GPG(2),
 		.active_low	= 1,
 		.desc		= "Contacts button",
 	},
 	{
 		.code		= KEY_F3,
 		.gpio		= S3C2410_GPG(3),
 		.active_low	= 1,
 		.desc		= "Mail button",
 	},
 	{
 		.code		= KEY_F4,
 		.gpio		= S3C2410_GPG(7),
 		.active_low	= 1,
 		.desc		= "WLAN button",
 	},
 	{
 		.code		= KEY_LEFT,
 		.gpio		= S3C2410_GPG(10),
 		.active_low	= 1,
 		.desc		= "Left button",
 	},
 	{
 		.code		= KEY_RIGHT,
 		.gpio		= S3C2410_GPG(11),
 		.active_low	= 1,
 		.desc		= "Right button",
 	},
 	{
 		.code		= KEY_UP,
 		.gpio		= S3C2410_GPG(4),
 		.active_low	= 1,
 		.desc		= "Up button",
 	},
 	{
 		.code		= KEY_DOWN,
 		.gpio		= S3C2410_GPG(6),
 		.active_low	= 1,
 		.desc		= "Down button",
 	},
 	{
 		.code		= KEY_ENTER,
 		.gpio		= S3C2410_GPG(9),
 		.active_low	= 1,
 		.desc		= "Ok button"
 	},
 };

 static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
 	.buttons = rx1950_gpio_keys_table,
 	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
 };

 static struct platform_device rx1950_device_gpiokeys = {
 	.name = "gpio-keys",
 	.dev.platform_data = &rx1950_gpio_keys_data,
 };

 static struct uda1380_platform_data uda1380_info = {
 	.gpio_power	= S3C2410_GPJ(0),
 	.gpio_reset	= S3C2410_GPD(0),
 	.dac_clk	= UDA1380_DAC_CLK_SYSCLK,
 };

 static struct i2c_board_info rx1950_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("uda1380", 0x1a),
 		.platform_data = &uda1380_info,
 	},
 };

 static struct platform_device *rx1950_devices[] __initdata = {
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&samsung_asoc_dma,
 	&s3c_device_usbgadget,
 	&s3c_device_rtc,
 	&s3c_device_nand,
 	&s3c_device_sdi,
 	&s3c_device_adc,
 	&s3c_device_ts,
 	&s3c_device_timer[0],
 	&s3c_device_timer[1],
 	&rx1950_backlight,
 	&rx1950_device_gpiokeys,
 	&power_supply,
 	&rx1950_battery,
 	&rx1950_leds,
 };

 static struct clk *rx1950_clocks[] __initdata = {
 	&s3c24xx_clkout0,
 	&s3c24xx_clkout1,
 };

 static void __init rx1950_map_io(void)
 {
 	s3c24xx_clkout0.parent  = &clk_h;
 	s3c24xx_clkout1.parent  = &clk_f;

 	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));

 	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));

 	/* setup PM */

 #ifdef CONFIG_PM_H1940
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
 #endif

 	s3c_pm_init();
 }

 static void __init rx1950_init_machine(void)
 {
 	int i;

 	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
 	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
 	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
 	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 	s3c_nand_set_platdata(&rx1950_nand_info);

 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 						S3C2410_MISCCR_USBSUSPND0 |
 						S3C2410_MISCCR_USBSUSPND1, 0x0);

 	/* mmc power is disabled by default */
 	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
 	gpio_direction_output(S3C2410_GPJ(1), 0);

 	for (i = 0; i < 8; i++)
 		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));

 	for (i = 10; i < 16; i++)
 		WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));

 	for (i = 2; i < 8; i++)
 		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));

 	for (i = 11; i < 16; i++)
 		WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));

 	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));

 	WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
 	WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
 	WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
 	gpio_direction_output(S3C2410_GPA(3), 0);
 	gpio_direction_output(S3C2410_GPA(4), 0);
 	gpio_direction_output(S3C2410_GPJ(6), 0);

 	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));

 	i2c_register_board_info(0, rx1950_i2c_devices,
 		ARRAY_SIZE(rx1950_i2c_devices));
 }

 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init rx1950_reserve(void)
 {
 	memblock_reserve(0x30003000, 0x1000);
 	memblock_reserve(0x30081000, 0x1000);
 }

 MACHINE_START(RX1950, "HP iPAQ RX1950")
     /* Maintainers: Vasily Khoruzhick */
 	.atag_offset = 0x100,
 	.map_io = rx1950_map_io,
 	.reserve	= rx1950_reserve,
 	.init_irq = s3c24xx_init_irq,
 	.init_machine = rx1950_init_machine,
 	.timer = &s3c24xx_timer,
 	.restart	= s3c244x_restart,
 MACHINE_END
	/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
	*
	* Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
	* Copyright (c) 2007-2010 Vasily Khoruzhick
	*
	* based on smdk2440 written by Ben Dooks
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	*/

	#include <linux/kernel.h>
	#include <linux/types.h>
	#include <linux/interrupt.h>
	#include <linux/list.h>
	#include <linux/memblock.h>
	#include <linux/delay.h>
	#include <linux/timer.h>
	#include <linux/init.h>
	#include <linux/gpio.h>
	#include <linux/platform_device.h>
	#include <linux/serial_core.h>
	#include <linux/input.h>
	#include <linux/gpio_keys.h>
	#include <linux/device.h>
	#include <linux/pda_power.h>
	#include <linux/pwm_backlight.h>
	#include <linux/pwm.h>
	#include <linux/s3c_adc_battery.h>
	#include <linux/leds.h>
	#include <linux/i2c.h>

	#include <linux/mtd/mtd.h>
	#include <linux/mtd/partitions.h>

	#include <linux/mmc/host.h>

	#include <asm/mach/arch.h>
	#include <asm/mach/map.h>
	#include <asm/mach-types.h>

	#include <mach/regs-gpio.h>
	#include <mach/regs-gpioj.h>
	#include <mach/regs-lcd.h>
	#include <mach/h1940.h>
	#include <mach/fb.h>

	#include <plat/clock.h>
	#include <plat/regs-serial.h>
	#include <plat/regs-iic.h>
	#include <plat/mci.h>
	#include <plat/udc.h>
	#include <plat/nand.h>
	#include <plat/iic.h>
	#include <plat/devs.h>
	#include <plat/cpu.h>
	#include <plat/pm.h>
	#include <plat/irq.h>
	#include <plat/ts.h>

	#include <sound/uda1380.h>

	#include "common.h"

	#define LCD_PWM_PERIOD 192960
	#define LCD_PWM_DUTY 127353

	static struct map_desc rx1950_iodesc[] __initdata = {
	};

	static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
	[0] = {
	.hwport = 0,
	.flags = 0,
	.ucon = 0x3c5,
	.ulcon = 0x03,
	.ufcon = 0x51,
	.clk_sel = S3C2410_UCON_CLKSEL3,
	},
	[1] = {
	.hwport = 1,
	.flags = 0,
	.ucon = 0x3c5,
	.ulcon = 0x03,
	.ufcon = 0x51,
	.clk_sel = S3C2410_UCON_CLKSEL3,
	},
	/* IR port */
	[2] = {
	.hwport = 2,
	.flags = 0,
	.ucon = 0x3c5,
	.ulcon = 0x43,
	.ufcon = 0xf1,
	.clk_sel = S3C2410_UCON_CLKSEL3,
	},
	};

	static struct s3c2410fb_display rx1950_display = {
	.type = S3C2410_LCDCON1_TFT,
	.width = 240,
	.height = 320,
	.xres = 240,
	.yres = 320,
	.bpp = 16,

	.pixclock = 260000,
	.left_margin = 10,
	.right_margin = 20,
	.hsync_len = 10,
	.upper_margin = 2,
	.lower_margin = 2,
	.vsync_len = 2,

	.lcdcon5 = S3C2410_LCDCON5_FRM565 \|
	S3C2410_LCDCON5_INVVCLK \|
	S3C2410_LCDCON5_INVVLINE \|
	S3C2410_LCDCON5_INVVFRAME \|
	S3C2410_LCDCON5_HWSWP \|
	(0x02 << 13) \|
	(0x02 << 15),

	};

	static int power_supply_init(struct device *dev)
	{
	return gpio_request(S3C2410_GPF(2), "cable plugged");
	}

	static int rx1950_is_ac_online(void)
	{
	return !gpio_get_value(S3C2410_GPF(2));
	}

	static void power_supply_exit(struct device *dev)
	{
	gpio_free(S3C2410_GPF(2));
	}

	static char *rx1950_supplicants[] = {
	"main-battery"
	};

	static struct pda_power_pdata power_supply_info = {
	.init = power_supply_init,
	.is_ac_online = rx1950_is_ac_online,
	.exit = power_supply_exit,
	.supplied_to = rx1950_supplicants,
	.num_supplicants = ARRAY_SIZE(rx1950_supplicants),
	};

	static struct resource power_supply_resources[] = {
	[0] = {
	.name = "ac",
	.flags = IORESOURCE_IRQ \| IORESOURCE_IRQ_LOWEDGE \|
	IORESOURCE_IRQ_HIGHEDGE,
	.start = IRQ_EINT2,
	.end = IRQ_EINT2,
	},
	};

	static struct platform_device power_supply = {
	.name = "pda-power",
	.id = -1,
	.dev = {
	.platform_data =
	&power_supply_info,
	},
	.resource = power_supply_resources,
	.num_resources = ARRAY_SIZE(power_supply_resources),
	};

	static const struct s3c_adc_bat_thresh bat_lut_noac[] = {
	{ .volt = 4100, .cur = 156, .level = 100},
	{ .volt = 4050, .cur = 156, .level = 95},
	{ .volt = 4025, .cur = 141, .level = 90},
	{ .volt = 3995, .cur = 144, .level = 85},
	{ .volt = 3957, .cur = 162, .level = 80},
	{ .volt = 3931, .cur = 147, .level = 75},
	{ .volt = 3902, .cur = 147, .level = 70},
	{ .volt = 3863, .cur = 153, .level = 65},
	{ .volt = 3838, .cur = 150, .level = 60},
	{ .volt = 3800, .cur = 153, .level = 55},
	{ .volt = 3765, .cur = 153, .level = 50},
	{ .volt = 3748, .cur = 172, .level = 45},
	{ .volt = 3740, .cur = 153, .level = 40},
	{ .volt = 3714, .cur = 175, .level = 35},
	{ .volt = 3710, .cur = 156, .level = 30},
	{ .volt = 3963, .cur = 156, .level = 25},
	{ .volt = 3672, .cur = 178, .level = 20},
	{ .volt = 3651, .cur = 178, .level = 15},
	{ .volt = 3629, .cur = 178, .level = 10},
	{ .volt = 3612, .cur = 162, .level = 5},
	{ .volt = 3605, .cur = 162, .level = 0},
	};

	static const struct s3c_adc_bat_thresh bat_lut_acin[] = {
	{ .volt = 4200, .cur = 0, .level = 100},
	{ .volt = 4190, .cur = 0, .level = 99},
	{ .volt = 4178, .cur = 0, .level = 95},
	{ .volt = 4110, .cur = 0, .level = 70},
	{ .volt = 4076, .cur = 0, .level = 65},
	{ .volt = 4046, .cur = 0, .level = 60},
	{ .volt = 4021, .cur = 0, .level = 55},
	{ .volt = 3999, .cur = 0, .level = 50},
	{ .volt = 3982, .cur = 0, .level = 45},
	{ .volt = 3965, .cur = 0, .level = 40},
	{ .volt = 3957, .cur = 0, .level = 35},
	{ .volt = 3948, .cur = 0, .level = 30},
	{ .volt = 3936, .cur = 0, .level = 25},
	{ .volt = 3927, .cur = 0, .level = 20},
	{ .volt = 3906, .cur = 0, .level = 15},
	{ .volt = 3880, .cur = 0, .level = 10},
	{ .volt = 3829, .cur = 0, .level = 5},
	{ .volt = 3820, .cur = 0, .level = 0},
	};

	int rx1950_bat_init(void)
	{
	int ret;

	ret = gpio_request(S3C2410_GPJ(2), "rx1950-charger-enable-1");
	if (ret)
	goto err_gpio1;
	ret = gpio_request(S3C2410_GPJ(3), "rx1950-charger-enable-2");
	if (ret)
	goto err_gpio2;

	return 0;

	err_gpio2:
	gpio_free(S3C2410_GPJ(2));
	err_gpio1:
	return ret;
	}

	void rx1950_bat_exit(void)
	{
	gpio_free(S3C2410_GPJ(2));
	gpio_free(S3C2410_GPJ(3));
	}

	void rx1950_enable_charger(void)
	{
	gpio_direction_output(S3C2410_GPJ(2), 1);
	gpio_direction_output(S3C2410_GPJ(3), 1);
	}

	void rx1950_disable_charger(void)
	{
	gpio_direction_output(S3C2410_GPJ(2), 0);
	gpio_direction_output(S3C2410_GPJ(3), 0);
	}

	DEFINE_SPINLOCK(rx1950_blink_spin);

	static int rx1950_led_blink_set(unsigned gpio, int state,
	unsigned long delay_on, unsigned long delay_off)
	{
	int blink_gpio, check_gpio;

	switch (gpio) {
	case S3C2410_GPA(6):
	blink_gpio = S3C2410_GPA(4);
	check_gpio = S3C2410_GPA(3);
	break;
	case S3C2410_GPA(7):
	blink_gpio = S3C2410_GPA(3);
	check_gpio = S3C2410_GPA(4);
	break;
	default:
	return -EINVAL;
	break;
	}

	if (delay_on && delay_off && !delay_on && !delay_off)
	delay_on = delay_off = 500;

	spin_lock(&rx1950_blink_spin);

	switch (state) {
	case GPIO_LED_NO_BLINK_LOW:
	case GPIO_LED_NO_BLINK_HIGH:
	if (!gpio_get_value(check_gpio))
	gpio_set_value(S3C2410_GPJ(6), 0);
	gpio_set_value(blink_gpio, 0);
	gpio_set_value(gpio, state);
	break;
	case GPIO_LED_BLINK:
	gpio_set_value(gpio, 0);
	gpio_set_value(S3C2410_GPJ(6), 1);
	gpio_set_value(blink_gpio, 1);
	break;
	}

	spin_unlock(&rx1950_blink_spin);

	return 0;
	}

	static struct gpio_led rx1950_leds_desc[] = {
	{
	.name = "Green",
	.default_trigger = "main-battery-full",
	.gpio = S3C2410_GPA(6),
	.retain_state_suspended = 1,
	},
	{
	.name = "Red",
	.default_trigger
	= "main-battery-charging-blink-full-solid",
	.gpio = S3C2410_GPA(7),
	.retain_state_suspended = 1,
	},
	{
	.name = "Blue",
	.default_trigger = "rx1950-acx-mem",
	.gpio = S3C2410_GPA(11),
	.retain_state_suspended = 1,
	},
	};

	static struct gpio_led_platform_data rx1950_leds_pdata = {
	.num_leds = ARRAY_SIZE(rx1950_leds_desc),
	.leds = rx1950_leds_desc,
	.gpio_blink_set = rx1950_led_blink_set,
	};

	static struct platform_device rx1950_leds = {
	.name = "leds-gpio",
	.id = -1,
	.dev = {
	.platform_data = &rx1950_leds_pdata,
	},
	};

	static struct s3c_adc_bat_pdata rx1950_bat_cfg = {
	.init = rx1950_bat_init,
	.exit = rx1950_bat_exit,
	.enable_charger = rx1950_enable_charger,
	.disable_charger = rx1950_disable_charger,
	.gpio_charge_finished = S3C2410_GPF(3),
	.lut_noac = bat_lut_noac,
	.lut_noac_cnt = ARRAY_SIZE(bat_lut_noac),
	.lut_acin = bat_lut_acin,
	.lut_acin_cnt = ARRAY_SIZE(bat_lut_acin),
	.volt_channel = 0,
	.current_channel = 1,
	.volt_mult = 4235,
	.current_mult = 2900,
	.internal_impedance = 200,
	};

	static struct platform_device rx1950_battery = {
	.name = "s3c-adc-battery",
	.id = -1,
	.dev = {
	.parent = &s3c_device_adc.dev,
	.platform_data = &rx1950_bat_cfg,
	},
	};

	static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
	.displays = &rx1950_display,
	.num_displays = 1,
	.default_display = 0,

	.lpcsel = 0x02,
	.gpccon = 0xaa9556a9,
	.gpccon_mask = 0xffc003fc,
	.gpcup = 0x0000ffff,
	.gpcup_mask = 0xffffffff,

	.gpdcon = 0xaa90aaa1,
	.gpdcon_mask = 0xffc0fff0,
	.gpdup = 0x0000fcfd,
	.gpdup_mask = 0xffffffff,

	};

	static struct pwm_device *lcd_pwm;

	void rx1950_lcd_power(int enable)
	{
	int i;
	static int enabled;
	if (enabled == enable)
	return;
	if (!enable) {

	/* GPC11-GPC15->OUTPUT */
	for (i = 11; i < 16; i++)
	gpio_direction_output(S3C2410_GPC(i), 1);

	/* Wait a bit here... */
	mdelay(100);

	/* GPD2-GPD7->OUTPUT */
	/* GPD11-GPD15->OUTPUT */
	/* GPD2-GPD7->1, GPD11-GPD15->1 */
	for (i = 2; i < 8; i++)
	gpio_direction_output(S3C2410_GPD(i), 1);
	for (i = 11; i < 16; i++)
	gpio_direction_output(S3C2410_GPD(i), 1);

	/* Wait a bit here...*/
	mdelay(100);

	/* GPB0->OUTPUT, GPB0->0 */
	gpio_direction_output(S3C2410_GPB(0), 0);

	/* GPC1-GPC4->OUTPUT, GPC1-4->0 */
	for (i = 1; i < 5; i++)
	gpio_direction_output(S3C2410_GPC(i), 0);

	/* GPC15-GPC11->0 */
	for (i = 11; i < 16; i++)
	gpio_direction_output(S3C2410_GPC(i), 0);

	/* GPD15-GPD11->0, GPD2->GPD7->0 */
	for (i = 11; i < 16; i++)
	gpio_direction_output(S3C2410_GPD(i), 0);

	for (i = 2; i < 8; i++)
	gpio_direction_output(S3C2410_GPD(i), 0);

	/* GPC6->0, GPC7->0, GPC5->0 */
	gpio_direction_output(S3C2410_GPC(6), 0);
	gpio_direction_output(S3C2410_GPC(7), 0);
	gpio_direction_output(S3C2410_GPC(5), 0);

	/* GPB1->OUTPUT, GPB1->0 */
	gpio_direction_output(S3C2410_GPB(1), 0);
	pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
	pwm_disable(lcd_pwm);

	/* GPC0->0, GPC10->0 */
	gpio_direction_output(S3C2410_GPC(0), 0);
	gpio_direction_output(S3C2410_GPC(10), 0);
	} else {
	pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
	pwm_enable(lcd_pwm);

	gpio_direction_output(S3C2410_GPC(0), 1);
	gpio_direction_output(S3C2410_GPC(5), 1);

	s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
	gpio_direction_output(S3C2410_GPC(7), 1);

	for (i = 1; i < 5; i++)
	s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));

	for (i = 11; i < 16; i++)
	s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));

	for (i = 2; i < 8; i++)
	s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));

	for (i = 11; i < 16; i++)
	s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));

	gpio_direction_output(S3C2410_GPC(10), 1);
	gpio_direction_output(S3C2410_GPC(6), 1);
	}
	enabled = enable;
	}

	static void rx1950_bl_power(int enable)
	{
	static int enabled;
	if (enabled == enable)
	return;
	if (!enable) {
	gpio_direction_output(S3C2410_GPB(0), 0);
	} else {
	/* LED driver need a "push" to power on */
	gpio_direction_output(S3C2410_GPB(0), 1);
	/* Warm up backlight for one period of PWM.
	* Without this trick its almost impossible to
	* enable backlight with low brightness value
	*/
	ndelay(48000);
	s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
	}
	enabled = enable;
	}

	static int rx1950_backlight_init(struct device *dev)
	{
	WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
	lcd_pwm = pwm_request(1, "RX1950 LCD");
	if (IS_ERR(lcd_pwm)) {
	dev_err(dev, "Unable to request PWM for LCD power!\n");
	return PTR_ERR(lcd_pwm);
	}

	rx1950_lcd_power(1);
	rx1950_bl_power(1);

	return 0;
	}

	static void rx1950_backlight_exit(struct device *dev)
	{
	rx1950_bl_power(0);
	rx1950_lcd_power(0);

	pwm_free(lcd_pwm);
	gpio_free(S3C2410_GPB(0));
	}


	static int rx1950_backlight_notify(struct device *dev, int brightness)
	{
	if (!brightness) {
	rx1950_bl_power(0);
	rx1950_lcd_power(0);
	} else {
	rx1950_lcd_power(1);
	rx1950_bl_power(1);
	}
	return brightness;
	}

	static struct platform_pwm_backlight_data rx1950_backlight_data = {
	.pwm_id = 0,
	.max_brightness = 24,
	.dft_brightness = 4,
	.pwm_period_ns = 48000,
	.init = rx1950_backlight_init,
	.notify = rx1950_backlight_notify,
	.exit = rx1950_backlight_exit,
	};

	static struct platform_device rx1950_backlight = {
	.name = "pwm-backlight",
	.dev = {
	.parent = &s3c_device_timer[0].dev,
	.platform_data = &rx1950_backlight_data,
	},
	};

	static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
	{
	switch (power_mode) {
	case MMC_POWER_OFF:
	gpio_direction_output(S3C2410_GPJ(1), 0);
	break;
	case MMC_POWER_UP:
	case MMC_POWER_ON:
	gpio_direction_output(S3C2410_GPJ(1), 1);
	break;
	default:
	break;
	}
	}

	static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
	.gpio_detect = S3C2410_GPF(5),
	.gpio_wprotect = S3C2410_GPH(8),
	.set_power = rx1950_set_mmc_power,
	.ocr_avail = MMC_VDD_32_33,
	};

	static struct mtd_partition rx1950_nand_part[] = {
	[0] = {
	.name = "Boot0",
	.offset = 0,
	.size = 0x4000,
	.mask_flags = MTD_WRITEABLE,
	},
	[1] = {
	.name = "Boot1",
	.offset = MTDPART_OFS_APPEND,
	.size = 0x40000,
	.mask_flags = MTD_WRITEABLE,
	},
	[2] = {
	.name = "Kernel",
	.offset = MTDPART_OFS_APPEND,
	.size = 0x300000,
	.mask_flags = 0,
	},
	[3] = {
	.name = "Filesystem",
	.offset = MTDPART_OFS_APPEND,
	.size = MTDPART_SIZ_FULL,
	.mask_flags = 0,
	},
	};

	static struct s3c2410_nand_set rx1950_nand_sets[] = {
	[0] = {
	.name = "Internal",
	.nr_chips = 1,
	.nr_partitions = ARRAY_SIZE(rx1950_nand_part),
	.partitions = rx1950_nand_part,
	},
	};

	static struct s3c2410_platform_nand rx1950_nand_info = {
	.tacls = 25,
	.twrph0 = 50,
	.twrph1 = 15,
	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
	.sets = rx1950_nand_sets,
	};

	static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
	.vbus_pin = S3C2410_GPG(5),
	.vbus_pin_inverted = 1,
	.pullup_pin = S3C2410_GPJ(5),
	};

	static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
	.delay = 10000,
	.presc = 49,
	.oversampling_shift = 3,
	};

	static struct gpio_keys_button rx1950_gpio_keys_table[] = {
	{
	.code = KEY_POWER,
	.gpio = S3C2410_GPF(0),
	.active_low = 1,
	.desc = "Power button",
	.wakeup = 1,
	},
	{
	.code = KEY_F5,
	.gpio = S3C2410_GPF(7),
	.active_low = 1,
	.desc = "Record button",
	},
	{
	.code = KEY_F1,
	.gpio = S3C2410_GPG(0),
	.active_low = 1,
	.desc = "Calendar button",
	},
	{
	.code = KEY_F2,
	.gpio = S3C2410_GPG(2),
	.active_low = 1,
	.desc = "Contacts button",
	},
	{
	.code = KEY_F3,
	.gpio = S3C2410_GPG(3),
	.active_low = 1,
	.desc = "Mail button",
	},
	{
	.code = KEY_F4,
	.gpio = S3C2410_GPG(7),
	.active_low = 1,
	.desc = "WLAN button",
	},
	{
	.code = KEY_LEFT,
	.gpio = S3C2410_GPG(10),
	.active_low = 1,
	.desc = "Left button",
	},
	{
	.code = KEY_RIGHT,
	.gpio = S3C2410_GPG(11),
	.active_low = 1,
	.desc = "Right button",
	},
	{
	.code = KEY_UP,
	.gpio = S3C2410_GPG(4),
	.active_low = 1,
	.desc = "Up button",
	},
	{
	.code = KEY_DOWN,
	.gpio = S3C2410_GPG(6),
	.active_low = 1,
	.desc = "Down button",
	},
	{
	.code = KEY_ENTER,
	.gpio = S3C2410_GPG(9),
	.active_low = 1,
	.desc = "Ok button"
	},
	};

	static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
	.buttons = rx1950_gpio_keys_table,
	.nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
	};

	static struct platform_device rx1950_device_gpiokeys = {
	.name = "gpio-keys",
	.dev.platform_data = &rx1950_gpio_keys_data,
	};

	static struct uda1380_platform_data uda1380_info = {
	.gpio_power = S3C2410_GPJ(0),
	.gpio_reset = S3C2410_GPD(0),
	.dac_clk = UDA1380_DAC_CLK_SYSCLK,
	};

	static struct i2c_board_info rx1950_i2c_devices[] = {
	{
	I2C_BOARD_INFO("uda1380", 0x1a),
	.platform_data = &uda1380_info,
	},
	};

	static struct platform_device *rx1950_devices[] __initdata = {
	&s3c_device_lcd,
	&s3c_device_wdt,
	&s3c_device_i2c0,
	&s3c_device_iis,
	&samsung_asoc_dma,
	&s3c_device_usbgadget,
	&s3c_device_rtc,
	&s3c_device_nand,
	&s3c_device_sdi,
	&s3c_device_adc,
	&s3c_device_ts,
	&s3c_device_timer[0],
	&s3c_device_timer[1],
	&rx1950_backlight,
	&rx1950_device_gpiokeys,
	&power_supply,
	&rx1950_battery,
	&rx1950_leds,
	};

	static struct clk *rx1950_clocks[] __initdata = {
	&s3c24xx_clkout0,
	&s3c24xx_clkout1,
	};

	static void __init rx1950_map_io(void)
	{
	s3c24xx_clkout0.parent = &clk_h;
	s3c24xx_clkout1.parent = &clk_f;

	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));

	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
	s3c24xx_init_clocks(16934000);
	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));

	/* setup PM */

	#ifdef CONFIG_PM_H1940
	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
	#endif

	s3c_pm_init();
	}

	static void __init rx1950_init_machine(void)
	{
	int i;

	s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
	s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
	s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
	s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
	s3c_i2c0_set_platdata(NULL);
	s3c_nand_set_platdata(&rx1950_nand_info);

	/* Turn off suspend on both USB ports, and switch the
	* selectable USB port to USB device mode. */
	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST \|
	S3C2410_MISCCR_USBSUSPND0 \|
	S3C2410_MISCCR_USBSUSPND1, 0x0);

	/* mmc power is disabled by default */
	WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
	gpio_direction_output(S3C2410_GPJ(1), 0);

	for (i = 0; i < 8; i++)
	WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));

	for (i = 10; i < 16; i++)
	WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));

	for (i = 2; i < 8; i++)
	WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));

	for (i = 11; i < 16; i++)
	WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));

	WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));

	WARN_ON(gpio_request(S3C2410_GPA(3), "Red blink"));
	WARN_ON(gpio_request(S3C2410_GPA(4), "Green blink"));
	WARN_ON(gpio_request(S3C2410_GPJ(6), "LED blink"));
	gpio_direction_output(S3C2410_GPA(3), 0);
	gpio_direction_output(S3C2410_GPA(4), 0);
	gpio_direction_output(S3C2410_GPJ(6), 0);

	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));

	i2c_register_board_info(0, rx1950_i2c_devices,
	ARRAY_SIZE(rx1950_i2c_devices));
	}

	/* H1940 and RX3715 need to reserve this for suspend */
	static void __init rx1950_reserve(void)
	{
	memblock_reserve(0x30003000, 0x1000);
	memblock_reserve(0x30081000, 0x1000);
	}

	MACHINE_START(RX1950, "HP iPAQ RX1950")
	/* Maintainers: Vasily Khoruzhick */
	.atag_offset = 0x100,
	.map_io = rx1950_map_io,
	.reserve = rx1950_reserve,
	.init_irq = s3c24xx_init_irq,
	.init_machine = rx1950_init_machine,
	.timer = &s3c24xx_timer,
	.restart = s3c244x_restart,
	MACHINE_END