| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/time.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/saif.h> |
| #include <mach/dma.h> |
| #include <asm/mach-types.h> |
| #include <mach/hardware.h> |
| #include <mach/mxs.h> |
| |
| #include "mxs-saif.h" |
| |
| static struct mxs_saif *mxs_saif[2]; |
| |
| /* |
| * SAIF is a little different with other normal SOC DAIs on clock using. |
| * |
| * For MXS, two SAIF modules are instantiated on-chip. |
| * Each SAIF has a set of clock pins and can be operating in master |
| * mode simultaneously if they are connected to different off-chip codecs. |
| * Also, one of the two SAIFs can master or drive the clock pins while the |
| * other SAIF, in slave mode, receives clocking from the master SAIF. |
| * This also means that both SAIFs must operate at the same sample rate. |
| * |
| * We abstract this as each saif has a master, the master could be |
| * himself or other saifs. In the generic saif driver, saif does not need |
| * to know the different clkmux. Saif only needs to know who is his master |
| * and operating his master to generate the proper clock rate for him. |
| * The master id is provided in mach-specific layer according to different |
| * clkmux setting. |
| */ |
| |
| static int mxs_saif_set_dai_sysclk(struct snd_soc_dai *cpu_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); |
| |
| switch (clk_id) { |
| case MXS_SAIF_MCLK: |
| saif->mclk = freq; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| /* |
| * Since SAIF may work on EXTMASTER mode, IOW, it's working BITCLK&LRCLK |
| * is provided by other SAIF, we provide a interface here to get its master |
| * from its master_id. |
| * Note that the master could be himself. |
| */ |
| static inline struct mxs_saif *mxs_saif_get_master(struct mxs_saif * saif) |
| { |
| return mxs_saif[saif->master_id]; |
| } |
| |
| /* |
| * Set SAIF clock and MCLK |
| */ |
| static int mxs_saif_set_clk(struct mxs_saif *saif, |
| unsigned int mclk, |
| unsigned int rate) |
| { |
| u32 scr; |
| int ret; |
| struct mxs_saif *master_saif; |
| |
| dev_dbg(saif->dev, "mclk %d rate %d\n", mclk, rate); |
| |
| /* Set master saif to generate proper clock */ |
| master_saif = mxs_saif_get_master(saif); |
| if (!master_saif) |
| return -EINVAL; |
| |
| dev_dbg(saif->dev, "master saif%d\n", master_saif->id); |
| |
| /* Checking if can playback and capture simutaneously */ |
| if (master_saif->ongoing && rate != master_saif->cur_rate) { |
| dev_err(saif->dev, |
| "can not change clock, master saif%d(rate %d) is ongoing\n", |
| master_saif->id, master_saif->cur_rate); |
| return -EINVAL; |
| } |
| |
| scr = __raw_readl(master_saif->base + SAIF_CTRL); |
| scr &= ~BM_SAIF_CTRL_BITCLK_MULT_RATE; |
| scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; |
| |
| /* |
| * Set SAIF clock |
| * |
| * The SAIF clock should be either 384*fs or 512*fs. |
| * If MCLK is used, the SAIF clk ratio need to match mclk ratio. |
| * For 32x mclk, set saif clk as 512*fs. |
| * For 48x mclk, set saif clk as 384*fs. |
| * |
| * If MCLK is not used, we just set saif clk to 512*fs. |
| */ |
| clk_prepare_enable(master_saif->clk); |
| |
| if (master_saif->mclk_in_use) { |
| if (mclk % 32 == 0) { |
| scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; |
| ret = clk_set_rate(master_saif->clk, 512 * rate); |
| } else if (mclk % 48 == 0) { |
| scr |= BM_SAIF_CTRL_BITCLK_BASE_RATE; |
| ret = clk_set_rate(master_saif->clk, 384 * rate); |
| } else { |
| /* SAIF MCLK should be either 32x or 48x */ |
| clk_disable_unprepare(master_saif->clk); |
| return -EINVAL; |
| } |
| } else { |
| ret = clk_set_rate(master_saif->clk, 512 * rate); |
| scr &= ~BM_SAIF_CTRL_BITCLK_BASE_RATE; |
| } |
| |
| clk_disable_unprepare(master_saif->clk); |
| |
| if (ret) |
| return ret; |
| |
| master_saif->cur_rate = rate; |
| |
| if (!master_saif->mclk_in_use) { |
| __raw_writel(scr, master_saif->base + SAIF_CTRL); |
| return 0; |
| } |
| |
| /* |
| * Program the over-sample rate for MCLK output |
| * |
| * The available MCLK range is 32x, 48x... 512x. The rate |
| * could be from 8kHz to 192kH. |
| */ |
| switch (mclk / rate) { |
| case 32: |
| scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(4); |
| break; |
| case 64: |
| scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3); |
| break; |
| case 128: |
| scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2); |
| break; |
| case 256: |
| scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1); |
| break; |
| case 512: |
| scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0); |
| break; |
| case 48: |
| scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(3); |
| break; |
| case 96: |
| scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(2); |
| break; |
| case 192: |
| scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(1); |
| break; |
| case 384: |
| scr |= BF_SAIF_CTRL_BITCLK_MULT_RATE(0); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| __raw_writel(scr, master_saif->base + SAIF_CTRL); |
| |
| return 0; |
| } |
| |
| /* |
| * Put and disable MCLK. |
| */ |
| int mxs_saif_put_mclk(unsigned int saif_id) |
| { |
| struct mxs_saif *saif = mxs_saif[saif_id]; |
| u32 stat; |
| |
| if (!saif) |
| return -EINVAL; |
| |
| stat = __raw_readl(saif->base + SAIF_STAT); |
| if (stat & BM_SAIF_STAT_BUSY) { |
| dev_err(saif->dev, "error: busy\n"); |
| return -EBUSY; |
| } |
| |
| clk_disable_unprepare(saif->clk); |
| |
| /* disable MCLK output */ |
| __raw_writel(BM_SAIF_CTRL_CLKGATE, |
| saif->base + SAIF_CTRL + MXS_SET_ADDR); |
| __raw_writel(BM_SAIF_CTRL_RUN, |
| saif->base + SAIF_CTRL + MXS_CLR_ADDR); |
| |
| saif->mclk_in_use = 0; |
| return 0; |
| } |
| |
| /* |
| * Get MCLK and set clock rate, then enable it |
| * |
| * This interface is used for codecs who are using MCLK provided |
| * by saif. |
| */ |
| int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk, |
| unsigned int rate) |
| { |
| struct mxs_saif *saif = mxs_saif[saif_id]; |
| u32 stat; |
| int ret; |
| struct mxs_saif *master_saif; |
| |
| if (!saif) |
| return -EINVAL; |
| |
| /* Clear Reset */ |
| __raw_writel(BM_SAIF_CTRL_SFTRST, |
| saif->base + SAIF_CTRL + MXS_CLR_ADDR); |
| |
| /* FIXME: need clear clk gate for register r/w */ |
| __raw_writel(BM_SAIF_CTRL_CLKGATE, |
| saif->base + SAIF_CTRL + MXS_CLR_ADDR); |
| |
| master_saif = mxs_saif_get_master(saif); |
| if (saif != master_saif) { |
| dev_err(saif->dev, "can not get mclk from a non-master saif\n"); |
| return -EINVAL; |
| } |
| |
| stat = __raw_readl(saif->base + SAIF_STAT); |
| if (stat & BM_SAIF_STAT_BUSY) { |
| dev_err(saif->dev, "error: busy\n"); |
| return -EBUSY; |
| } |
| |
| saif->mclk_in_use = 1; |
| ret = mxs_saif_set_clk(saif, mclk, rate); |
| if (ret) |
| return ret; |
| |
| ret = clk_prepare_enable(saif->clk); |
| if (ret) |
| return ret; |
| |
| /* enable MCLK output */ |
| __raw_writel(BM_SAIF_CTRL_RUN, |
| saif->base + SAIF_CTRL + MXS_SET_ADDR); |
| |
| return 0; |
| } |
| |
| /* |
| * SAIF DAI format configuration. |
| * Should only be called when port is inactive. |
| */ |
| static int mxs_saif_set_dai_fmt(struct snd_soc_dai *cpu_dai, unsigned int fmt) |
| { |
| u32 scr, stat; |
| u32 scr0; |
| struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); |
| |
| stat = __raw_readl(saif->base + SAIF_STAT); |
| if (stat & BM_SAIF_STAT_BUSY) { |
| dev_err(cpu_dai->dev, "error: busy\n"); |
| return -EBUSY; |
| } |
| |
| scr0 = __raw_readl(saif->base + SAIF_CTRL); |
| scr0 = scr0 & ~BM_SAIF_CTRL_BITCLK_EDGE & ~BM_SAIF_CTRL_LRCLK_POLARITY \ |
| & ~BM_SAIF_CTRL_JUSTIFY & ~BM_SAIF_CTRL_DELAY; |
| scr = 0; |
| |
| /* DAI mode */ |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: |
| /* data frame low 1clk before data */ |
| scr |= BM_SAIF_CTRL_DELAY; |
| scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; |
| break; |
| case SND_SOC_DAIFMT_LEFT_J: |
| /* data frame high with data */ |
| scr &= ~BM_SAIF_CTRL_DELAY; |
| scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; |
| scr &= ~BM_SAIF_CTRL_JUSTIFY; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* DAI clock inversion */ |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_IB_IF: |
| scr |= BM_SAIF_CTRL_BITCLK_EDGE; |
| scr |= BM_SAIF_CTRL_LRCLK_POLARITY; |
| break; |
| case SND_SOC_DAIFMT_IB_NF: |
| scr |= BM_SAIF_CTRL_BITCLK_EDGE; |
| scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| scr &= ~BM_SAIF_CTRL_BITCLK_EDGE; |
| scr |= BM_SAIF_CTRL_LRCLK_POLARITY; |
| break; |
| case SND_SOC_DAIFMT_NB_NF: |
| scr &= ~BM_SAIF_CTRL_BITCLK_EDGE; |
| scr &= ~BM_SAIF_CTRL_LRCLK_POLARITY; |
| break; |
| } |
| |
| /* |
| * Note: We simply just support master mode since SAIF TX can only |
| * work as master. |
| * Here the master is relative to codec side. |
| * Saif internally could be slave when working on EXTMASTER mode. |
| * We just hide this to machine driver. |
| */ |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBS_CFS: |
| if (saif->id == saif->master_id) |
| scr &= ~BM_SAIF_CTRL_SLAVE_MODE; |
| else |
| scr |= BM_SAIF_CTRL_SLAVE_MODE; |
| |
| __raw_writel(scr | scr0, saif->base + SAIF_CTRL); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int mxs_saif_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); |
| snd_soc_dai_set_dma_data(cpu_dai, substream, &saif->dma_param); |
| |
| /* clear error status to 0 for each re-open */ |
| saif->fifo_underrun = 0; |
| saif->fifo_overrun = 0; |
| |
| /* Clear Reset for normal operations */ |
| __raw_writel(BM_SAIF_CTRL_SFTRST, |
| saif->base + SAIF_CTRL + MXS_CLR_ADDR); |
| |
| /* clear clock gate */ |
| __raw_writel(BM_SAIF_CTRL_CLKGATE, |
| saif->base + SAIF_CTRL + MXS_CLR_ADDR); |
| |
| return 0; |
| } |
| |
| /* |
| * Should only be called when port is inactive. |
| * although can be called multiple times by upper layers. |
| */ |
| static int mxs_saif_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); |
| u32 scr, stat; |
| int ret; |
| |
| /* mclk should already be set */ |
| if (!saif->mclk && saif->mclk_in_use) { |
| dev_err(cpu_dai->dev, "set mclk first\n"); |
| return -EINVAL; |
| } |
| |
| stat = __raw_readl(saif->base + SAIF_STAT); |
| if (stat & BM_SAIF_STAT_BUSY) { |
| dev_err(cpu_dai->dev, "error: busy\n"); |
| return -EBUSY; |
| } |
| |
| /* |
| * Set saif clk based on sample rate. |
| * If mclk is used, we also set mclk, if not, saif->mclk is |
| * default 0, means not used. |
| */ |
| ret = mxs_saif_set_clk(saif, saif->mclk, params_rate(params)); |
| if (ret) { |
| dev_err(cpu_dai->dev, "unable to get proper clk\n"); |
| return ret; |
| } |
| |
| scr = __raw_readl(saif->base + SAIF_CTRL); |
| |
| scr &= ~BM_SAIF_CTRL_WORD_LENGTH; |
| scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| scr |= BF_SAIF_CTRL_WORD_LENGTH(0); |
| break; |
| case SNDRV_PCM_FORMAT_S20_3LE: |
| scr |= BF_SAIF_CTRL_WORD_LENGTH(4); |
| scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| scr |= BF_SAIF_CTRL_WORD_LENGTH(8); |
| scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* Tx/Rx config */ |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| /* enable TX mode */ |
| scr &= ~BM_SAIF_CTRL_READ_MODE; |
| } else { |
| /* enable RX mode */ |
| scr |= BM_SAIF_CTRL_READ_MODE; |
| } |
| |
| __raw_writel(scr, saif->base + SAIF_CTRL); |
| return 0; |
| } |
| |
| static int mxs_saif_prepare(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); |
| |
| /* enable FIFO error irqs */ |
| __raw_writel(BM_SAIF_CTRL_FIFO_ERROR_IRQ_EN, |
| saif->base + SAIF_CTRL + MXS_SET_ADDR); |
| |
| return 0; |
| } |
| |
| static int mxs_saif_trigger(struct snd_pcm_substream *substream, int cmd, |
| struct snd_soc_dai *cpu_dai) |
| { |
| struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai); |
| struct mxs_saif *master_saif; |
| u32 delay; |
| |
| master_saif = mxs_saif_get_master(saif); |
| if (!master_saif) |
| return -EINVAL; |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| dev_dbg(cpu_dai->dev, "start\n"); |
| |
| clk_enable(master_saif->clk); |
| if (!master_saif->mclk_in_use) |
| __raw_writel(BM_SAIF_CTRL_RUN, |
| master_saif->base + SAIF_CTRL + MXS_SET_ADDR); |
| |
| /* |
| * If the saif's master is not himself, we also need to enable |
| * itself clk for its internal basic logic to work. |
| */ |
| if (saif != master_saif) { |
| clk_enable(saif->clk); |
| __raw_writel(BM_SAIF_CTRL_RUN, |
| saif->base + SAIF_CTRL + MXS_SET_ADDR); |
| } |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| /* |
| * write a data to saif data register to trigger |
| * the transfer |
| */ |
| __raw_writel(0, saif->base + SAIF_DATA); |
| } else { |
| /* |
| * read a data from saif data register to trigger |
| * the receive |
| */ |
| __raw_readl(saif->base + SAIF_DATA); |
| } |
| |
| master_saif->ongoing = 1; |
| |
| dev_dbg(saif->dev, "CTRL 0x%x STAT 0x%x\n", |
| __raw_readl(saif->base + SAIF_CTRL), |
| __raw_readl(saif->base + SAIF_STAT)); |
| |
| dev_dbg(master_saif->dev, "CTRL 0x%x STAT 0x%x\n", |
| __raw_readl(master_saif->base + SAIF_CTRL), |
| __raw_readl(master_saif->base + SAIF_STAT)); |
| break; |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| case SNDRV_PCM_TRIGGER_STOP: |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| dev_dbg(cpu_dai->dev, "stop\n"); |
| |
| /* wait a while for the current sample to complete */ |
| delay = USEC_PER_SEC / master_saif->cur_rate; |
| |
| if (!master_saif->mclk_in_use) { |
| __raw_writel(BM_SAIF_CTRL_RUN, |
| master_saif->base + SAIF_CTRL + MXS_CLR_ADDR); |
| udelay(delay); |
| } |
| clk_disable(master_saif->clk); |
| |
| if (saif != master_saif) { |
| __raw_writel(BM_SAIF_CTRL_RUN, |
| saif->base + SAIF_CTRL + MXS_CLR_ADDR); |
| udelay(delay); |
| clk_disable(saif->clk); |
| } |
| |
| master_saif->ongoing = 0; |
| |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| #define MXS_SAIF_RATES SNDRV_PCM_RATE_8000_192000 |
| #define MXS_SAIF_FORMATS \ |
| (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| SNDRV_PCM_FMTBIT_S24_LE) |
| |
| static const struct snd_soc_dai_ops mxs_saif_dai_ops = { |
| .startup = mxs_saif_startup, |
| .trigger = mxs_saif_trigger, |
| .prepare = mxs_saif_prepare, |
| .hw_params = mxs_saif_hw_params, |
| .set_sysclk = mxs_saif_set_dai_sysclk, |
| .set_fmt = mxs_saif_set_dai_fmt, |
| }; |
| |
| static int mxs_saif_dai_probe(struct snd_soc_dai *dai) |
| { |
| struct mxs_saif *saif = dev_get_drvdata(dai->dev); |
| |
| snd_soc_dai_set_drvdata(dai, saif); |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dai_driver mxs_saif_dai = { |
| .name = "mxs-saif", |
| .probe = mxs_saif_dai_probe, |
| .playback = { |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = MXS_SAIF_RATES, |
| .formats = MXS_SAIF_FORMATS, |
| }, |
| .capture = { |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = MXS_SAIF_RATES, |
| .formats = MXS_SAIF_FORMATS, |
| }, |
| .ops = &mxs_saif_dai_ops, |
| }; |
| |
| static irqreturn_t mxs_saif_irq(int irq, void *dev_id) |
| { |
| struct mxs_saif *saif = dev_id; |
| unsigned int stat; |
| |
| stat = __raw_readl(saif->base + SAIF_STAT); |
| if (!(stat & (BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ | |
| BM_SAIF_STAT_FIFO_OVERFLOW_IRQ))) |
| return IRQ_NONE; |
| |
| if (stat & BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ) { |
| dev_dbg(saif->dev, "underrun!!! %d\n", ++saif->fifo_underrun); |
| __raw_writel(BM_SAIF_STAT_FIFO_UNDERFLOW_IRQ, |
| saif->base + SAIF_STAT + MXS_CLR_ADDR); |
| } |
| |
| if (stat & BM_SAIF_STAT_FIFO_OVERFLOW_IRQ) { |
| dev_dbg(saif->dev, "overrun!!! %d\n", ++saif->fifo_overrun); |
| __raw_writel(BM_SAIF_STAT_FIFO_OVERFLOW_IRQ, |
| saif->base + SAIF_STAT + MXS_CLR_ADDR); |
| } |
| |
| dev_dbg(saif->dev, "SAIF_CTRL %x SAIF_STAT %x\n", |
| __raw_readl(saif->base + SAIF_CTRL), |
| __raw_readl(saif->base + SAIF_STAT)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int mxs_saif_probe(struct platform_device *pdev) |
| { |
| struct resource *iores, *dmares; |
| struct mxs_saif *saif; |
| struct mxs_saif_platform_data *pdata; |
| int ret = 0; |
| |
| if (pdev->id >= ARRAY_SIZE(mxs_saif)) |
| return -EINVAL; |
| |
| saif = devm_kzalloc(&pdev->dev, sizeof(*saif), GFP_KERNEL); |
| if (!saif) |
| return -ENOMEM; |
| |
| mxs_saif[pdev->id] = saif; |
| saif->id = pdev->id; |
| |
| pdata = pdev->dev.platform_data; |
| if (pdata && !pdata->master_mode) { |
| saif->master_id = pdata->master_id; |
| if (saif->master_id < 0 || |
| saif->master_id >= ARRAY_SIZE(mxs_saif) || |
| saif->master_id == saif->id) { |
| dev_err(&pdev->dev, "get wrong master id\n"); |
| return -EINVAL; |
| } |
| } else { |
| saif->master_id = saif->id; |
| } |
| |
| saif->clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(saif->clk)) { |
| ret = PTR_ERR(saif->clk); |
| dev_err(&pdev->dev, "Cannot get the clock: %d\n", |
| ret); |
| return ret; |
| } |
| |
| iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| saif->base = devm_request_and_ioremap(&pdev->dev, iores); |
| if (!saif->base) { |
| dev_err(&pdev->dev, "ioremap failed\n"); |
| ret = -ENODEV; |
| goto failed_get_resource; |
| } |
| |
| dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); |
| if (!dmares) { |
| ret = -ENODEV; |
| dev_err(&pdev->dev, "failed to get dma resource: %d\n", |
| ret); |
| goto failed_get_resource; |
| } |
| saif->dma_param.chan_num = dmares->start; |
| |
| saif->irq = platform_get_irq(pdev, 0); |
| if (saif->irq < 0) { |
| ret = saif->irq; |
| dev_err(&pdev->dev, "failed to get irq resource: %d\n", |
| ret); |
| goto failed_get_resource; |
| } |
| |
| saif->dev = &pdev->dev; |
| ret = devm_request_irq(&pdev->dev, saif->irq, mxs_saif_irq, 0, |
| "mxs-saif", saif); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to request irq\n"); |
| goto failed_get_resource; |
| } |
| |
| saif->dma_param.chan_irq = platform_get_irq(pdev, 1); |
| if (saif->dma_param.chan_irq < 0) { |
| ret = saif->dma_param.chan_irq; |
| dev_err(&pdev->dev, "failed to get dma irq resource: %d\n", |
| ret); |
| goto failed_get_resource; |
| } |
| |
| platform_set_drvdata(pdev, saif); |
| |
| ret = snd_soc_register_dai(&pdev->dev, &mxs_saif_dai); |
| if (ret) { |
| dev_err(&pdev->dev, "register DAI failed\n"); |
| goto failed_get_resource; |
| } |
| |
| saif->soc_platform_pdev = platform_device_alloc( |
| "mxs-pcm-audio", pdev->id); |
| if (!saif->soc_platform_pdev) { |
| ret = -ENOMEM; |
| goto failed_pdev_alloc; |
| } |
| |
| platform_set_drvdata(saif->soc_platform_pdev, saif); |
| ret = platform_device_add(saif->soc_platform_pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to add soc platform device\n"); |
| goto failed_pdev_add; |
| } |
| |
| return 0; |
| |
| failed_pdev_add: |
| platform_device_put(saif->soc_platform_pdev); |
| failed_pdev_alloc: |
| snd_soc_unregister_dai(&pdev->dev); |
| failed_get_resource: |
| clk_put(saif->clk); |
| |
| return ret; |
| } |
| |
| static int __devexit mxs_saif_remove(struct platform_device *pdev) |
| { |
| struct mxs_saif *saif = platform_get_drvdata(pdev); |
| |
| platform_device_unregister(saif->soc_platform_pdev); |
| snd_soc_unregister_dai(&pdev->dev); |
| clk_put(saif->clk); |
| |
| return 0; |
| } |
| |
| static struct platform_driver mxs_saif_driver = { |
| .probe = mxs_saif_probe, |
| .remove = __devexit_p(mxs_saif_remove), |
| |
| .driver = { |
| .name = "mxs-saif", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| module_platform_driver(mxs_saif_driver); |
| |
| MODULE_AUTHOR("Freescale Semiconductor, Inc."); |
| MODULE_DESCRIPTION("MXS ASoC SAIF driver"); |
| MODULE_LICENSE("GPL"); |