Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (88 commits)
Blackfin: Convert BUG() to use unreachable()
Blackfin: define __NR_recvmmsg
Blackfin: drop duplicate sched_clock
Blackfin: NOMPU: skip DMA ICPLB hole when it is redundant
Blackfin: MPU: add missing __init markings
Blackfin: add support for TIF_NOTIFY_RESUME
Blackfin: kgdb_test: clean up code a bit
Blackfin: convert kgdbtest to proc_fops
Blackfin: convert cyc2ns() to clocksource_cyc2ns()
Blackfin: ip0x: pull in asm/portmux.h for P_xxx defines
Blackfin: drop unused ax88180 resources
Blackfin: bf537-stamp: add ADF702x network driver resources
Blackfin: bf537-stamp: add CAN resources
Blackfin: bf537-stamp: add AD5258 i2c address
Blackfin: bf537-stamp: add adau1761 i2c address
Blackfin: bf537-stamp: add adau1371 i2c address
Blackfin: bf537-stamp: add ADP8870 resources
Blackfin: bf537-stamp: kill AD714x board-specific Kconfigs
Blackfin: bf537-stamp: update ADP5520 resources
Blackfin: bf537-stamp: add ADXL346 orientation sensing support
...
diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX
index d6840a9..c34e124 100644
--- a/Documentation/blackfin/00-INDEX
+++ b/Documentation/blackfin/00-INDEX
@@ -1,9 +1,6 @@
00-INDEX
- This file
-cache-lock.txt
- - HOWTO for blackfin cache locking.
-
cachefeatures.txt
- Supported cache features.
diff --git a/Documentation/blackfin/Makefile b/Documentation/blackfin/Makefile
new file mode 100644
index 0000000..773dbb1
--- /dev/null
+++ b/Documentation/blackfin/Makefile
@@ -0,0 +1,6 @@
+obj-m := gptimers-example.o
+
+all: modules
+
+modules clean:
+ $(MAKE) -C ../.. SUBDIRS=$(PWD) $@
diff --git a/Documentation/blackfin/cache-lock.txt b/Documentation/blackfin/cache-lock.txt
deleted file mode 100644
index 88ba1e6..0000000
--- a/Documentation/blackfin/cache-lock.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * File: Documentation/blackfin/cache-lock.txt
- * Based on:
- * Author:
- *
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
- *
- * Rev: $Id: cache-lock.txt 2384 2006-11-01 04:12:43Z magicyang $
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- */
-
-How to lock your code in cache in uClinux/blackfin
---------------------------------------------------
-
-There are only a few steps required to lock your code into the cache.
-Currently you can lock the code by Way.
-
-Below are the interface provided for locking the cache.
-
-
-1. cache_grab_lock(int Ways);
-
-This function grab the lock for locking your code into the cache specified
-by Ways.
-
-
-2. cache_lock(int Ways);
-
-This function should be called after your critical code has been executed.
-Once the critical code exits, the code is now loaded into the cache. This
-function locks the code into the cache.
-
-
-So, the example sequence will be:
-
- cache_grab_lock(WAY0_L); /* Grab the lock */
-
- critical_code(); /* Execute the code of interest */
-
- cache_lock(WAY0_L); /* Lock the cache */
-
-Where WAY0_L signifies WAY0 locking.
diff --git a/Documentation/blackfin/cachefeatures.txt b/Documentation/blackfin/cachefeatures.txt
index 0fbec23..75de51f 100644
--- a/Documentation/blackfin/cachefeatures.txt
+++ b/Documentation/blackfin/cachefeatures.txt
@@ -41,16 +41,6 @@
icplb_flush();
dcplb_flush();
- - Locking the cache.
-
- cache_grab_lock();
- cache_lock();
-
- Please refer linux-2.6.x/Documentation/blackfin/cache-lock.txt for how to
- lock the cache.
-
- Locking the cache is optional feature.
-
- Miscellaneous cache functions.
flush_cache_all();
diff --git a/Documentation/blackfin/gptimers-example.c b/Documentation/blackfin/gptimers-example.c
new file mode 100644
index 0000000..b1bd634
--- /dev/null
+++ b/Documentation/blackfin/gptimers-example.c
@@ -0,0 +1,83 @@
+/*
+ * Simple gptimers example
+ * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:gptimers
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/gptimers.h>
+#include <asm/portmux.h>
+
+/* ... random driver includes ... */
+
+#define DRIVER_NAME "gptimer_example"
+
+struct gptimer_data {
+ uint32_t period, width;
+};
+static struct gptimer_data data;
+
+/* ... random driver state ... */
+
+static irqreturn_t gptimer_example_irq(int irq, void *dev_id)
+{
+ struct gptimer_data *data = dev_id;
+
+ /* make sure it was our timer which caused the interrupt */
+ if (!get_gptimer_intr(TIMER5_id))
+ return IRQ_NONE;
+
+ /* read the width/period values that were captured for the waveform */
+ data->width = get_gptimer_pwidth(TIMER5_id);
+ data->period = get_gptimer_period(TIMER5_id);
+
+ /* acknowledge the interrupt */
+ clear_gptimer_intr(TIMER5_id);
+
+ /* tell the upper layers we took care of things */
+ return IRQ_HANDLED;
+}
+
+/* ... random driver code ... */
+
+static int __init gptimer_example_init(void)
+{
+ int ret;
+
+ /* grab the peripheral pins */
+ ret = peripheral_request(P_TMR5, DRIVER_NAME);
+ if (ret) {
+ printk(KERN_NOTICE DRIVER_NAME ": peripheral request failed\n");
+ return ret;
+ }
+
+ /* grab the IRQ for the timer */
+ ret = request_irq(IRQ_TIMER5, gptimer_example_irq, IRQF_SHARED, DRIVER_NAME, &data);
+ if (ret) {
+ printk(KERN_NOTICE DRIVER_NAME ": IRQ request failed\n");
+ peripheral_free(P_TMR5);
+ return ret;
+ }
+
+ /* setup the timer and enable it */
+ set_gptimer_config(TIMER5_id, WDTH_CAP | PULSE_HI | PERIOD_CNT | IRQ_ENA);
+ enable_gptimers(TIMER5bit);
+
+ return 0;
+}
+module_init(gptimer_example_init);
+
+static void __exit gptimer_example_exit(void)
+{
+ disable_gptimers(TIMER5bit);
+ free_irq(IRQ_TIMER5, &data);
+ peripheral_free(P_TMR5);
+}
+module_exit(gptimer_example_exit);
+
+MODULE_LICENSE("BSD");
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 2180433..53c1e1d 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -32,6 +32,9 @@
select HAVE_OPROFILE
select ARCH_WANT_OPTIONAL_GPIOLIB
+config GENERIC_CSUM
+ def_bool y
+
config GENERIC_BUG
def_bool y
depends on BUG
@@ -177,7 +180,7 @@
help
BF539 Processor Support.
-config BF542
+config BF542_std
bool "BF542"
help
BF542 Processor Support.
@@ -187,7 +190,7 @@
help
BF542 Processor Support.
-config BF544
+config BF544_std
bool "BF544"
help
BF544 Processor Support.
@@ -197,7 +200,7 @@
help
BF544 Processor Support.
-config BF547
+config BF547_std
bool "BF547"
help
BF547 Processor Support.
@@ -207,7 +210,7 @@
help
BF547 Processor Support.
-config BF548
+config BF548_std
bool "BF548"
help
BF548 Processor Support.
@@ -217,7 +220,7 @@
help
BF548 Processor Support.
-config BF549
+config BF549_std
bool "BF549"
help
BF549 Processor Support.
@@ -311,31 +314,11 @@
endchoice
-config BF51x
- bool
- depends on (BF512 || BF514 || BF516 || BF518)
- default y
-
-config BF52x
- bool
- depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
- default y
-
config BF53x
bool
depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
default y
-config BF54xM
- bool
- depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
- default y
-
-config BF54x
- bool
- depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
- default y
-
config MEM_GENERIC_BOARD
bool
depends on GENERIC_BOARD
@@ -917,6 +900,12 @@
bool "Enable 2M DMA region"
config DMA_UNCACHED_1M
bool "Enable 1M DMA region"
+config DMA_UNCACHED_512K
+ bool "Enable 512K DMA region"
+config DMA_UNCACHED_256K
+ bool "Enable 256K DMA region"
+config DMA_UNCACHED_128K
+ bool "Enable 128K DMA region"
config DMA_UNCACHED_NONE
bool "Disable DMA region"
endchoice
@@ -1278,6 +1267,8 @@
source "drivers/Kconfig"
+source "drivers/firmware/Kconfig"
+
source "fs/Kconfig"
source "arch/blackfin/Kconfig.debug"
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index f063b77..d4c7177 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -16,6 +16,7 @@
KBUILD_CFLAGS += $(call cc-option,-mno-fdpic)
KBUILD_AFLAGS += $(call cc-option,-mno-fdpic)
CFLAGS_MODULE += -mlong-calls
+LDFLAGS_MODULE += -m elf32bfin
KALLSYMS += --symbol-prefix=_
KBUILD_DEFCONFIG := BF537-STAMP_defconfig
@@ -137,7 +138,7 @@
INSTALL_PATH ?= /tftpboot
boot := arch/$(ARCH)/boot
-BOOT_TARGETS = vmImage vmImage.bz2 vmImage.gz vmImage.lzma
+BOOT_TARGETS = vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma
PHONY += $(BOOT_TARGETS) install
KBUILD_IMAGE := $(boot)/vmImage
@@ -151,6 +152,7 @@
define archhelp
echo '* vmImage - Alias to selected kernel format (vmImage.gz by default)'
+ echo ' vmImage.bin - Uncompressed Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bin)'
echo ' vmImage.bz2 - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.bz2)'
echo '* vmImage.gz - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
echo ' vmImage.lzma - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index fd9ccc5..e9c48c6 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -8,7 +8,7 @@
MKIMAGE := $(srctree)/scripts/mkuboot.sh
-targets := vmImage vmImage.bz2 vmImage.gz vmImage.lzma
+targets := vmImage vmImage.bin vmImage.bz2 vmImage.gz vmImage.lzma
extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
quiet_cmd_uimage = UIMAGE $@
@@ -29,6 +29,9 @@
$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
$(call if_changed,lzma)
+$(obj)/vmImage.bin: $(obj)/vmlinux.bin
+ $(call if_changed,uimage,none)
+
$(obj)/vmImage.bz2: $(obj)/vmlinux.bin.bz2
$(call if_changed,uimage,bzip2)
@@ -38,6 +41,7 @@
$(obj)/vmImage.lzma: $(obj)/vmlinux.bin.lzma
$(call if_changed,uimage,lzma)
+suffix-y := bin
suffix-$(CONFIG_KERNEL_GZIP) := gz
suffix-$(CONFIG_KERNEL_BZIP2) := bz2
suffix-$(CONFIG_KERNEL_LZMA) := lzma
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 9905b26..e315594 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -67,6 +67,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
@@ -316,6 +317,7 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
@@ -438,17 +440,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
-CONFIG_NET_DSA=y
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_DSA_TAG_TRAILER is not set
-CONFIG_NET_DSA_TAG_STPID=y
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-CONFIG_NET_DSA_KSZ8893M=y
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 9dc6820..075e0fd 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -67,6 +67,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
@@ -321,6 +322,7 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 77e35d4..6d1a623 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -67,6 +67,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
@@ -321,6 +322,7 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=y
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 4c04480..50f9a23 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -67,6 +67,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
@@ -283,6 +284,7 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index c99bbcd..6c60c82 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -67,6 +67,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
@@ -283,6 +284,7 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 092ffda..2908595 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -67,6 +67,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
@@ -290,6 +291,7 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
@@ -704,10 +706,7 @@
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index fa698a8..09ea249 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -67,6 +67,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
@@ -301,6 +302,7 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index f773ad1..eb3e98b 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,22 +1,29 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.31.5
+# Mon Nov 2 22:02:56 2009
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -26,22 +33,40 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -62,17 +87,28 @@
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -80,11 +116,8 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -94,13 +127,12 @@
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
@@ -137,7 +169,7 @@
# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
# CONFIG_BF547M is not set
-CONFIG_BF548=y
+CONFIG_BF548_std=y
# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
# CONFIG_BF549M is not set
@@ -195,7 +227,7 @@
#
# BF548 Specific Configuration
#
-# CONFIG_DEB_DMA_URGENT is not set
+CONFIG_DEB_DMA_URGENT=y
# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
#
@@ -352,10 +384,11 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
CONFIG_DMA_UNCACHED_2M=y
@@ -366,14 +399,13 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+# CONFIG_BFIN_L2_ICACHEABLE is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
# CONFIG_BFIN_L2_DCACHEABLE is not set
#
@@ -382,7 +414,7 @@
# CONFIG_MPU is not set
#
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
#
#
@@ -441,11 +473,6 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -469,13 +496,11 @@
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -493,7 +518,10 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -548,14 +576,10 @@
# CONFIG_MCS_FIR is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS is not set
CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_LIB80211=m
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -578,6 +602,7 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
@@ -653,7 +678,6 @@
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_BF5XX=y
CONFIG_MTD_NAND_BF5XX_HWECC=y
@@ -665,6 +689,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -682,10 +711,20 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_AD525X_DPOT is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -709,10 +748,6 @@
# CONFIG_BLK_DEV_SR_VENDOR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -729,6 +764,7 @@
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -744,13 +780,34 @@
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
-CONFIG_SMSC911X=y
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -759,6 +816,8 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -771,13 +830,16 @@
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=m
CONFIG_POWEROF2_BLOCKSIZE_ONLY=y
+# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -813,28 +875,31 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_KEYBOARD_BFIN=y
-# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_BFIN=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=m
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
@@ -844,6 +909,8 @@
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
@@ -852,7 +919,11 @@
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
-# CONFIG_CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_BFIN_ROTARY is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_PCF8574 is not set
#
# Hardware I/O ports
@@ -863,16 +934,13 @@
#
# Character devices
#
-# CONFIG_AD9960 is not set
CONFIG_BFIN_DMA_INTERFACE=m
# CONFIG_BFIN_PPI is not set
# CONFIG_BFIN_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BFIN_SPI_ADC is not set
CONFIG_BFIN_SPORT=m
-# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_BFIN_TWI_LCD is not set
-CONFIG_SIMPLE_GPIO=m
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
@@ -890,6 +958,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_DMA=y
@@ -903,6 +972,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_OTP=y
# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
@@ -951,14 +1021,9 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
@@ -975,13 +1040,18 @@
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@@ -997,6 +1067,7 @@
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -1038,28 +1109,19 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -1096,6 +1158,7 @@
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -1132,6 +1195,7 @@
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
@@ -1142,6 +1206,11 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
@@ -1152,7 +1221,6 @@
#
# ALSA Blackfin devices
#
-# CONFIG_SND_BLACKFIN_AD1836 is not set
# CONFIG_SND_BFIN_AD73322 is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
@@ -1160,15 +1228,17 @@
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
# CONFIG_SND_BF5XX_I2S is not set
+# CONFIG_SND_BF5XX_TDM is not set
CONFIG_SND_BF5XX_AC97=y
CONFIG_SND_BF5XX_MMAP_SUPPORT=y
# CONFIG_SND_BF5XX_MULTICHAN_SUPPORT is not set
-CONFIG_SND_BF5XX_SOC_SPORT=y
-CONFIG_SND_BF5XX_SOC_AC97=y
-CONFIG_SND_BF5XX_SOC_AD1980=y
-CONFIG_SND_BF5XX_SPORT_NUM=0
CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
+CONFIG_SND_BF5XX_SOC_AD1980=y
+CONFIG_SND_BF5XX_SOC_SPORT=y
+CONFIG_SND_BF5XX_SOC_AC97=y
+CONFIG_SND_BF5XX_SPORT_NUM=0
+CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_AD1980=y
# CONFIG_SOUND_PRIME is not set
@@ -1188,30 +1258,34 @@
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -1237,6 +1311,7 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
@@ -1267,18 +1342,17 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1314,7 +1388,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1326,6 +1399,13 @@
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -1380,6 +1460,7 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
@@ -1411,10 +1492,21 @@
#
CONFIG_RTC_DRV_BFIN=y
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1427,9 +1519,11 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1439,6 +1533,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1467,10 +1566,7 @@
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1489,17 +1585,8 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1508,6 +1595,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
@@ -1522,7 +1610,6 @@
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1596,11 +1683,15 @@
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1608,16 +1699,21 @@
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
@@ -1625,17 +1721,16 @@
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VERBOSE=y
@@ -1657,17 +1752,15 @@
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
#
# Security options
#
# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
+# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
#
@@ -1746,6 +1839,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1753,11 +1847,13 @@
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
@@ -1767,6 +1863,8 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig
new file mode 100644
index 0000000..b9b0f93
--- /dev/null
+++ b/arch/blackfin/configs/BF561-ACVILON_defconfig
@@ -0,0 +1,1643 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31.4
+# Sat Oct 24 12:15:32 2009
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+CONFIG_EPOLL=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
+CONFIG_BF561=y
+# CONFIG_SMP is not set
+CONFIG_BF_REV_MIN=3
+CONFIG_BF_REV_MAX=5
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_0_6 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_TIMER0=10
+CONFIG_IRQ_TIMER1=10
+CONFIG_IRQ_TIMER2=10
+CONFIG_IRQ_TIMER3=10
+CONFIG_IRQ_TIMER4=10
+CONFIG_IRQ_TIMER5=10
+CONFIG_IRQ_TIMER6=10
+CONFIG_IRQ_TIMER7=10
+CONFIG_IRQ_SPI_ERROR=7
+# CONFIG_BFIN561_EZKIT is not set
+# CONFIG_BFIN561_TEPLA is not set
+# CONFIG_BFIN561_BLUETECHNIX_CM is not set
+CONFIG_BFIN561_ACVILON=y
+
+#
+# BF561 Specific Configuration
+#
+
+#
+# Core B Support
+#
+# CONFIG_BF561_COREB is not set
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA1_ERROR=7
+CONFIG_IRQ_DMA2_ERROR=7
+CONFIG_IRQ_IMDMA_ERROR=7
+CONFIG_IRQ_PPI0_ERROR=7
+CONFIG_IRQ_PPI1_ERROR=7
+CONFIG_IRQ_UART_ERROR=7
+CONFIG_IRQ_RESERVED_ERROR=7
+CONFIG_IRQ_DMA1_0=8
+CONFIG_IRQ_DMA1_1=8
+CONFIG_IRQ_DMA1_2=8
+CONFIG_IRQ_DMA1_3=8
+CONFIG_IRQ_DMA1_4=8
+CONFIG_IRQ_DMA1_5=8
+CONFIG_IRQ_DMA1_6=8
+CONFIG_IRQ_DMA1_7=8
+CONFIG_IRQ_DMA1_8=8
+CONFIG_IRQ_DMA1_9=8
+CONFIG_IRQ_DMA1_10=8
+CONFIG_IRQ_DMA1_11=8
+CONFIG_IRQ_DMA2_0=9
+CONFIG_IRQ_DMA2_1=9
+CONFIG_IRQ_DMA2_2=9
+CONFIG_IRQ_DMA2_3=9
+CONFIG_IRQ_DMA2_4=9
+CONFIG_IRQ_DMA2_5=9
+CONFIG_IRQ_DMA2_6=9
+CONFIG_IRQ_DMA2_7=9
+CONFIG_IRQ_DMA2_8=9
+CONFIG_IRQ_DMA2_9=9
+CONFIG_IRQ_DMA2_10=9
+CONFIG_IRQ_DMA2_11=9
+CONFIG_IRQ_TIMER8=10
+CONFIG_IRQ_TIMER9=10
+CONFIG_IRQ_TIMER10=10
+CONFIG_IRQ_TIMER11=10
+CONFIG_IRQ_PROG0_INTA=11
+CONFIG_IRQ_PROG0_INTB=11
+CONFIG_IRQ_PROG1_INTA=11
+CONFIG_IRQ_PROG1_INTB=11
+CONFIG_IRQ_PROG2_INTA=11
+CONFIG_IRQ_PROG2_INTB=11
+CONFIG_IRQ_DMA1_WRRD0=8
+CONFIG_IRQ_DMA1_WRRD1=8
+CONFIG_IRQ_DMA2_WRRD0=9
+CONFIG_IRQ_DMA2_WRRD1=9
+CONFIG_IRQ_IMDMA_WRRD0=12
+CONFIG_IRQ_IMDMA_WRRD1=12
+CONFIG_IRQ_WDTIMER=13
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=12000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+CONFIG_CYCLES_CLOCKSOURCE=y
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_DMA_UNCACHED_4M=y
+# CONFIG_DMA_UNCACHED_2M is not set
+# CONFIG_DMA_UNCACHED_1M is not set
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
+
+#
+# Asynchronous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+CONFIG_C_B0PEN=y
+CONFIG_C_B1PEN=y
+CONFIG_C_B2PEN=y
+# CONFIG_C_B3PEN is not set
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x99b2
+CONFIG_BANK_1=0x3350
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xAAC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_UCLINUX is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+CONFIG_MTD_PHRAM=y
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=y
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_BFIN_DMA_INTERFACE is not set
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
+CONFIG_BFIN_SIMPLE_TIMER=y
+# CONFIG_BFIN_SPI_ADC is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TWI_LCD is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_SERIAL_BFIN_DMA is not set
+CONFIG_SERIAL_BFIN_PIO=y
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_SPI=y
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BFIN_AD73322 is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_BF5XX_I2S=y
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
+# CONFIG_SND_BF5XX_SOC_AD73311 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1371 is not set
+# CONFIG_SND_BF5XX_SOC_ADAU1761 is not set
+# CONFIG_SND_BF5XX_TDM is not set
+# CONFIG_SND_BF5XX_AC97 is not set
+CONFIG_SND_BF5XX_SOC_SPORT=y
+CONFIG_SND_BF5XX_SPORT_NUM=1
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=y
+# CONFIG_USB_SERIAL_CONSOLE is not set
+# CONFIG_USB_EZUSB is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=y
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_SIGMA is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="cp1251"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_JFFS2_LZO=y
+# CONFIG_JFFS2_RTIME is not set
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp1251"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=y
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_KOI8_R=y
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_VERBOSE=y
+CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_HWERR is not set
+# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 0313cd1..e3ecdcc 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,22 +1,29 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Thu May 21 05:50:01 2009
+# Linux kernel version: 2.6.31.5
+# Mon Nov 2 21:59:31 2009
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_BUG=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -26,22 +33,40 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -62,17 +87,28 @@
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -80,11 +116,8 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -94,13 +127,12 @@
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
@@ -170,6 +202,7 @@
CONFIG_BFIN561_EZKIT=y
# CONFIG_BFIN561_TEPLA is not set
# CONFIG_BFIN561_BLUETECHNIX_CM is not set
+# CONFIG_BFIN561_ACVILON is not set
#
# BF561 Specific Configuration
@@ -317,10 +350,11 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=m
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
@@ -331,14 +365,13 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+# CONFIG_BFIN_L2_ICACHEABLE is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_ICACHEABLE is not set
# CONFIG_BFIN_L2_DCACHEABLE is not set
#
@@ -347,7 +380,7 @@
# CONFIG_MPU is not set
#
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
#
#
@@ -407,11 +440,6 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -435,13 +463,11 @@
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -459,7 +485,10 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -503,13 +532,8 @@
#
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -530,6 +554,7 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
@@ -603,6 +628,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -619,9 +649,14 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -645,9 +680,11 @@
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -656,6 +693,8 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -664,7 +703,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -708,15 +750,12 @@
#
# Character devices
#
-# CONFIG_AD9960 is not set
CONFIG_BFIN_DMA_INTERFACE=m
# CONFIG_BFIN_PPI is not set
# CONFIG_BFIN_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BFIN_SPI_ADC is not set
# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
-CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
CONFIG_BFIN_JTAG_COMM=m
@@ -730,6 +769,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_DMA=y
@@ -740,6 +780,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
#
@@ -763,13 +804,18 @@
# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@@ -782,9 +828,6 @@
#
# I2C GPIO expanders:
#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
@@ -822,23 +865,9 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -862,7 +891,6 @@
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -870,10 +898,20 @@
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_MEMMAP is not set
+
+#
# File systems
#
# CONFIG_EXT2_FS is not set
@@ -882,9 +920,11 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -894,6 +934,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -915,10 +960,7 @@
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -937,17 +979,8 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -956,6 +989,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
@@ -966,7 +1000,6 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1034,11 +1067,15 @@
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1046,16 +1083,21 @@
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
@@ -1063,17 +1105,19 @@
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VERBOSE=y
@@ -1095,16 +1139,15 @@
CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
#
# Security options
#
# CONFIG_KEYS is not set
-CONFIG_SECURITY=y
+# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
#
@@ -1183,6 +1226,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1190,11 +1234,13 @@
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
@@ -1204,6 +1250,8 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 5d944ff..9e65d88 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -66,6 +66,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
@@ -275,6 +276,7 @@
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=y
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 648a31d..4432150 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -1,12 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
+# Linux kernel version: 2.6.30.5
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -15,6 +16,9 @@
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -25,55 +29,72 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -81,11 +102,8 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -101,7 +119,6 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
@@ -265,7 +282,10 @@
# CONFIG_SCHED_HRTICK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -315,10 +335,12 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=y
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
@@ -329,10 +351,9 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -343,7 +364,7 @@
# CONFIG_MPU is not set
#
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
#
#
@@ -361,7 +382,7 @@
# EBIU_AMBCTL Control
#
CONFIG_BANK_0=0x7BB0
-CONFIG_BANK_1=0x5554
+CONFIG_BANK_1=0x7BB0
CONFIG_BANK_2=0x7BB0
CONFIG_BANK_3=0xFFC0
@@ -386,7 +407,6 @@
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
@@ -400,11 +420,6 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -428,7 +443,6 @@
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -452,7 +466,9 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -463,13 +479,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -484,22 +495,21 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
-CONFIG_MTD_CHAR=m
+CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
@@ -512,9 +522,9 @@
#
# RAM/ROM/Flash chip drivers
#
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
@@ -526,9 +536,11 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
+CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
@@ -538,7 +550,7 @@
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_GPIO_ADDR is not set
+CONFIG_MTD_GPIO_ADDR=y
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -562,6 +574,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -586,12 +603,46 @@
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -613,6 +664,9 @@
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -623,9 +677,11 @@
CONFIG_BFIN_RX_DESC_NUM=20
CONFIG_BFIN_MAC_RMII=y
# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -633,6 +689,7 @@
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -641,7 +698,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -674,17 +734,13 @@
#
# Character devices
#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-# CONFIG_BF5xx_EPPI is not set
-# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
CONFIG_BFIN_DMA_INTERFACE=m
-CONFIG_SIMPLE_GPIO=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BFIN_SPI_ADC is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TWI_LCD is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
@@ -698,6 +754,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_DMA=y
@@ -710,6 +767,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_BFIN_OTP=y
# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
@@ -758,13 +816,9 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -772,7 +826,6 @@
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
@@ -780,17 +833,17 @@
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
@@ -803,6 +856,7 @@
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -829,11 +883,13 @@
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -849,11 +905,16 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
@@ -885,6 +946,12 @@
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -892,10 +959,14 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
@@ -931,20 +1002,20 @@
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
+CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
-CONFIG_USB_MON=y
+CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
@@ -952,24 +1023,24 @@
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_SOC=y
#
# Blackfin high speed USB Support
#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
CONFIG_MUSB_PIO_ONLY=y
-CONFIG_MUSB_DMA_POLL=y
# CONFIG_USB_MUSB_DEBUG is not set
#
@@ -981,18 +1052,31 @@
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
@@ -1013,7 +1097,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1021,9 +1104,50 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2272 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -1090,6 +1214,7 @@
#
CONFIG_RTC_DRV_BFIN=y
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1102,9 +1227,10 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1114,6 +1240,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1122,8 +1253,11 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -1135,10 +1269,7 @@
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1146,9 +1277,19 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1157,6 +1298,7 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
@@ -1167,7 +1309,6 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1182,9 +1323,9 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
@@ -1208,7 +1349,7 @@
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
+CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
@@ -1235,55 +1376,34 @@
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB_TESTCASE is not set
CONFIG_DEBUG_VERBOSE=y
-CONFIG_DEBUG_MMRS=y
-# CONFIG_DEBUG_HWERR is not set
+# CONFIG_DEBUG_MMRS is not set
# CONFIG_DEBUG_DOUBLEFAULT is not set
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1293,9 +1413,10 @@
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_CPLB_INFO is not set
CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
#
# Security options
@@ -1304,9 +1425,9 @@
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
@@ -1385,6 +1506,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1392,20 +1514,24 @@
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index ae665b9..df56639 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -1,94 +1,110 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.30.5
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -96,7 +112,7 @@
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
@@ -105,6 +121,7 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
#
# Blackfin Processor Options
@@ -113,6 +130,10 @@
#
# Processor and Board Settings
#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
# CONFIG_BF522 is not set
# CONFIG_BF523 is not set
# CONFIG_BF524 is not set
@@ -125,28 +146,38 @@
# CONFIG_BF534 is not set
# CONFIG_BF536 is not set
# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=3
+CONFIG_BF_REV_MAX=6
# CONFIG_BF_REV_0_0 is not set
# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
CONFIG_MEM_MT48LC16M16A2TG_75=y
# CONFIG_BFIN533_EZKIT is not set
# CONFIG_BFIN533_STAMP is not set
+# CONFIG_BLACKSTAMP is not set
CONFIG_BFIN533_BLUETECHNIX_CM=y
# CONFIG_H8606_HVSISTEMAS is not set
-# CONFIG_GENERIC_BF533_BOARD is not set
+# CONFIG_BFIN532_IP0X is not set
#
# BF533/2/1 Specific Configuration
@@ -188,6 +219,7 @@
# Board customizations
#
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
#
# Clock/PLL Setup
@@ -207,13 +239,20 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
-# Memory Setup
+# Misc
#
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -240,6 +279,12 @@
CONFIG_CACHELINE_ALIGNED_L1=y
CONFIG_SYSCALL_TAB_L1=y
CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
@@ -248,12 +293,16 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
# CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
# CONFIG_DMA_UNCACHED_NONE is not set
@@ -262,10 +311,9 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -276,7 +324,7 @@
# CONFIG_MPU is not set
#
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
#
#
@@ -301,12 +349,8 @@
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
-# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
#
# Executable file formats
@@ -315,22 +359,19 @@
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -339,45 +380,13 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETLABEL is not set
+# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -385,31 +394,23 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -418,20 +419,22 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -444,12 +447,15 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -460,6 +466,11 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
+CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
@@ -468,12 +479,16 @@
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -489,36 +504,25 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -526,34 +530,19 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
-# CONFIG_AX88180 is not set
# CONFIG_NETDEV_10000 is not set
#
@@ -561,22 +550,17 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -593,16 +577,15 @@
#
# Character devices
#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
-# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_DMA_INTERFACE is not set
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_BFIN_SPI_ADC is not set
+# CONFIG_BFIN_SPORT is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -613,6 +596,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_DMA=y
@@ -623,176 +607,141 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
#
# CAN, the car bus and industrial fieldbus
#
# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# USB support
+# MMC/SD/SDIO Card Drivers
#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
-# Enable Host or Gadget support to see Inventra options
+# MMC/SD/SDIO Host Controller Drivers
#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_FS_MBCACHE=y
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -801,8 +750,11 @@
#
# DOS/FAT/NT Filesystems
#
+CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -813,12 +765,8 @@
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -826,60 +774,106 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_DOUBLEFAULT is not set
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -888,34 +882,39 @@
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
+CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index d74b6f4..22e565c 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -1,13 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28.10
-# Wed Jun 3 06:27:41 2009
+# Linux kernel version: 2.6.30.5
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -16,6 +16,9 @@
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -26,21 +29,40 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -49,7 +71,8 @@
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
@@ -65,12 +88,13 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -78,11 +102,8 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -98,7 +119,6 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -181,7 +201,8 @@
CONFIG_IRQ_WATCH=13
CONFIG_IRQ_SPI=10
# CONFIG_BFIN537_STAMP is not set
-CONFIG_BFIN537_BLUETECHNIX_CM=y
+CONFIG_BFIN537_BLUETECHNIX_CM_E=y
+# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
# CONFIG_PNAV10 is not set
# CONFIG_CAMSIG_MINOTAUR is not set
@@ -283,10 +304,12 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
# CONFIG_BFIN_GPTIMERS is not set
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
@@ -297,10 +320,9 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -311,7 +333,7 @@
# CONFIG_MPU is not set
#
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
#
#
@@ -337,6 +359,7 @@
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
#
# Executable file formats
@@ -366,11 +389,6 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -394,7 +412,6 @@
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
@@ -418,7 +435,9 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -429,8 +448,8 @@
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -441,16 +460,21 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
@@ -486,22 +510,26 @@
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_GPIO_ADDR=y
-CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -517,6 +545,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -533,9 +566,14 @@
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -549,6 +587,7 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -570,6 +609,9 @@
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -580,8 +622,11 @@
CONFIG_BFIN_RX_DESC_NUM=20
# CONFIG_BFIN_MAC_RMII is not set
# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -598,7 +643,10 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -622,15 +670,12 @@
#
# Character devices
#
-# CONFIG_AD9960 is not set
CONFIG_BFIN_DMA_INTERFACE=m
# CONFIG_BFIN_PPI is not set
# CONFIG_BFIN_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BFIN_SPI_ADC is not set
CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_SIMPLE_GPIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
@@ -644,6 +689,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_DMA=y
@@ -656,6 +702,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
#
@@ -668,7 +715,23 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
@@ -688,15 +751,21 @@
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -758,21 +827,74 @@
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# Enable Host or Gadget support to see Inventra options
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+CONFIG_USB_GADGET_NET2272=y
+CONFIG_USB_NET2272=m
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# OTG and related infrastructure
#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -789,9 +911,10 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -801,6 +924,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -809,8 +937,11 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -822,10 +953,7 @@
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -833,9 +961,19 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_YAFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -844,14 +982,70 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
@@ -867,14 +1061,28 @@
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_DEBUG_VERBOSE=y
@@ -888,9 +1096,10 @@
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
#
# Security options
@@ -899,8 +1108,9 @@
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
@@ -979,6 +1189,7 @@
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -986,19 +1197,24 @@
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 7fc8dfa..efcc90d 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -1,94 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.30.5
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -105,6 +122,7 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
#
# Blackfin Processor Options
@@ -113,6 +131,10 @@
#
# Processor and Board Settings
#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
# CONFIG_BF522 is not set
# CONFIG_BF523 is not set
# CONFIG_BF524 is not set
@@ -125,22 +147,31 @@
# CONFIG_BF534 is not set
# CONFIG_BF536 is not set
CONFIG_BF537=y
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=2
+CONFIG_BF_REV_MAX=3
# CONFIG_BF_REV_0_0 is not set
# CONFIG_BF_REV_0_1 is not set
CONFIG_BF_REV_0_2=y
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
CONFIG_MEM_MT48LC16M16A2TG_75=y
CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_RTC=8
@@ -150,7 +181,6 @@
CONFIG_IRQ_SPORT1_RX=9
CONFIG_IRQ_SPORT1_TX=9
CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI=10
CONFIG_IRQ_UART0_RX=10
CONFIG_IRQ_UART0_TX=10
CONFIG_IRQ_UART1_RX=10
@@ -169,11 +199,13 @@
CONFIG_IRQ_MEM_DMA0=13
CONFIG_IRQ_MEM_DMA1=13
CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_SPI=10
# CONFIG_BFIN537_STAMP is not set
-CONFIG_BFIN537_BLUETECHNIX_CM=y
+# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
+CONFIG_BFIN537_BLUETECHNIX_CM_U=y
+# CONFIG_BFIN537_BLUETECHNIX_TCM is not set
# CONFIG_PNAV10 is not set
# CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
#
# BF537 Specific Configuration
@@ -196,6 +228,7 @@
# Board customizations
#
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
#
# Clock/PLL Setup
@@ -215,13 +248,20 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
-# Memory Setup
+# Misc
#
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -248,6 +288,12 @@
CONFIG_CACHELINE_ALIGNED_L1=y
CONFIG_SYSCALL_TAB_L1=y
CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
@@ -256,12 +302,16 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
# CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
# CONFIG_DMA_UNCACHED_NONE is not set
@@ -270,10 +320,9 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -284,7 +333,7 @@
# CONFIG_MPU is not set
#
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
#
#
@@ -309,12 +358,8 @@
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
-# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
#
# Executable file formats
@@ -323,22 +368,19 @@
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -347,10 +389,6 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -369,15 +407,13 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -386,6 +422,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -395,29 +432,23 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -426,20 +457,22 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -452,12 +485,15 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -468,20 +504,29 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
+CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_GPIO_ADDR=y
+# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -497,36 +542,36 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
#
-# Misc devices
+# EEPROM support
#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -534,35 +579,20 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_SMC91X=y
-# CONFIG_BFIN_MAC is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DM9000 is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
-# CONFIG_AX88180 is not set
# CONFIG_NETDEV_10000 is not set
#
@@ -570,22 +600,17 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -602,16 +627,15 @@
#
# Character devices
#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -622,6 +646,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_DMA=y
@@ -634,165 +659,201 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
#
# CAN, the car bus and industrial fieldbus
#
# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
#
-# SPI support
+# Memory mapped GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
#
-# Dallas's 1-wire bus
+# I2C GPIO expanders:
#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
-# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
CONFIG_USB_GADGET_NET2272=y
CONFIG_USB_NET2272=y
# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_MMC is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
#
-# LED devices
+# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -802,25 +863,29 @@
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -829,8 +894,11 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -841,12 +909,8 @@
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -854,18 +918,29 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
@@ -873,41 +948,94 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_DOUBLEFAULT is not set
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -916,34 +1044,40 @@
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
+CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index acca4e5..7f579cf 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -1,14 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24.4
+# Linux kernel version: 2.6.30.5
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
@@ -16,6 +16,9 @@
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -26,79 +29,100 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
-CONFIG_UID16=y
+# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
#
# Blackfin Processor Options
@@ -107,6 +131,10 @@
#
# Processor and Board Settings
#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
# CONFIG_BF522 is not set
# CONFIG_BF523 is not set
# CONFIG_BF524 is not set
@@ -119,19 +147,29 @@
# CONFIG_BF534 is not set
# CONFIG_BF536 is not set
# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
-CONFIG_BF548=y
+# CONFIG_BF547M is not set
+CONFIG_BF548_std=y
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=0
+CONFIG_BF_REV_MAX=2
# CONFIG_BF_REV_0_0 is not set
# CONFIG_BF_REV_0_1 is not set
-CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_2 is not set
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_0_5 is not set
-# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_0_6 is not set
+CONFIG_BF_REV_ANY=y
# CONFIG_BF_REV_NONE is not set
CONFIG_BF54x=y
CONFIG_IRQ_PLL_WAKEUP=7
@@ -140,15 +178,12 @@
CONFIG_IRQ_SPORT0_TX=9
CONFIG_IRQ_SPORT1_RX=9
CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_SPI0=10
CONFIG_IRQ_UART0_RX=10
CONFIG_IRQ_UART0_TX=10
CONFIG_IRQ_UART1_RX=10
CONFIG_IRQ_UART1_TX=10
CONFIG_IRQ_CNT=8
-CONFIG_IRQ_USB_INT0=11
-CONFIG_IRQ_USB_INT1=11
-CONFIG_IRQ_USB_INT2=11
-CONFIG_IRQ_USB_DMA=11
CONFIG_IRQ_TIMER0=11
CONFIG_IRQ_TIMER1=11
CONFIG_IRQ_TIMER2=11
@@ -157,9 +192,21 @@
CONFIG_IRQ_TIMER5=11
CONFIG_IRQ_TIMER6=11
CONFIG_IRQ_TIMER7=11
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
CONFIG_IRQ_TIMER8=11
CONFIG_IRQ_TIMER9=11
CONFIG_IRQ_TIMER10=11
+CONFIG_IRQ_SPORT2_RX=9
+CONFIG_IRQ_SPORT2_TX=9
+CONFIG_IRQ_SPORT3_RX=9
+CONFIG_IRQ_SPORT3_TX=9
+CONFIG_IRQ_SPI1=10
+CONFIG_IRQ_SPI2=10
+CONFIG_IRQ_TWI0=11
+CONFIG_IRQ_TWI1=11
# CONFIG_BFIN548_EZKIT is not set
CONFIG_BFIN548_BLUETECHNIX_CM=y
@@ -167,6 +214,7 @@
# BF548 Specific Configuration
#
# CONFIG_DEB_DMA_URGENT is not set
+# CONFIG_BF548_ATAPI_ALTERNATIVE_PORT is not set
#
# Interrupt Priority Assignment
@@ -182,7 +230,6 @@
CONFIG_IRQ_SPI0_ERR=7
CONFIG_IRQ_UART0_ERR=7
CONFIG_IRQ_EPPI0=8
-CONFIG_IRQ_SPI0=10
CONFIG_IRQ_PINT0=12
CONFIG_IRQ_PINT1=12
CONFIG_IRQ_MDMAS0=13
@@ -197,18 +244,10 @@
CONFIG_IRQ_UART1_ERR=7
CONFIG_IRQ_UART2_ERR=7
CONFIG_IRQ_CAN0_ERR=7
-CONFIG_IRQ_SPORT2_RX=9
-CONFIG_IRQ_SPORT2_TX=9
-CONFIG_IRQ_SPORT3_RX=9
-CONFIG_IRQ_SPORT3_TX=9
CONFIG_IRQ_EPPI1=9
CONFIG_IRQ_EPPI2=9
-CONFIG_IRQ_SPI1=10
-CONFIG_IRQ_SPI2=10
CONFIG_IRQ_ATAPI_RX=10
CONFIG_IRQ_ATAPI_TX=10
-CONFIG_IRQ_TWI0=11
-CONFIG_IRQ_TWI1=11
CONFIG_IRQ_CAN0_RX=11
CONFIG_IRQ_CAN0_TX=11
CONFIG_IRQ_MDMAS2=13
@@ -255,6 +294,7 @@
# Board customizations
#
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
#
# Clock/PLL Setup
@@ -274,16 +314,12 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_GENERIC_TIME is not set
-# CONFIG_TICK_ONESHOT is not set
#
-# Memory Setup
+# Misc
#
-CONFIG_MAX_MEM_SIZE=64
-# CONFIG_MEM_MT46V32M16_6T is not set
-CONFIG_MEM_MT46V32M16_5B=y
-CONFIG_BOOT_LOAD=0x1000
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -310,6 +346,12 @@
CONFIG_CACHELINE_ALIGNED_L1=y
# CONFIG_SYSCALL_TAB_L1 is not set
# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
@@ -318,13 +360,16 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
# CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
# CONFIG_DMA_UNCACHED_NONE is not set
@@ -333,14 +378,13 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+# CONFIG_BFIN_L2_ICACHEABLE is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_EXTMEM_WRITEBACK
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
# CONFIG_BFIN_L2_DCACHEABLE is not set
#
@@ -349,7 +393,7 @@
# CONFIG_MPU is not set
#
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
#
#
@@ -369,7 +413,7 @@
CONFIG_BANK_0=0x7BB0
CONFIG_BANK_1=0x5554
CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B2
+CONFIG_BANK_3=0x99B3
CONFIG_EBIU_MBSCTLVAL=0x0
CONFIG_EBIU_MODEVAL=0x1
CONFIG_EBIU_FCTLVAL=0x6
@@ -377,7 +421,6 @@
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
-# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
@@ -388,23 +431,19 @@
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -417,6 +456,7 @@
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -435,19 +475,16 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -456,6 +493,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -465,24 +503,21 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -501,10 +536,12 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -539,6 +576,7 @@
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
@@ -549,9 +587,8 @@
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -575,6 +612,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -587,31 +629,31 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
+CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
-CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
+# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
@@ -632,29 +674,54 @@
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
-CONFIG_SMSC911X=y
# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -666,6 +733,10 @@
# CONFIG_WLAN_80211 is not set
#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
@@ -676,7 +747,6 @@
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -711,6 +781,7 @@
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_BFIN is not set
# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@@ -726,19 +797,16 @@
#
# Character devices
#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_BFIN_SPI_ADC is not set
# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_BFIN_TWI_LCD is not set
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
+# CONFIG_BFIN_JTAG_COMM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -749,10 +817,11 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
-CONFIG_SERIAL_BFIN_DMA=y
-# CONFIG_SERIAL_BFIN_PIO is not set
+# CONFIG_SERIAL_BFIN_DMA is not set
+CONFIG_SERIAL_BFIN_PIO=y
# CONFIG_SERIAL_BFIN_UART0 is not set
CONFIG_SERIAL_BFIN_UART1=y
# CONFIG_BFIN_UART1_CTSRTS is not set
@@ -762,7 +831,10 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
#
# CAN, the car bus and industrial fieldbus
@@ -770,61 +842,53 @@
# CONFIG_CAN4LINUX is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -832,64 +896,23 @@
# SPI Master Controller Drivers
#
CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -903,25 +926,43 @@
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
-# CONFIG_USB_DABUSB is not set
#
# Graphics support
@@ -935,80 +976,75 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
+# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
+CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
-CONFIG_USB_MUSB_HDRC=y
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_SOC=y
#
-# Blackfin BF54x, BF525 and BF527 high speed USB support
+# Blackfin high speed USB Support
#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
# CONFIG_USB_MUSB_OTG is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
# CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
+CONFIG_USB_INVENTRA_DMA=y
# CONFIG_USB_TI_CPPI_DMA is not set
-CONFIG_USB_MUSB_LOGLEVEL=0
+# CONFIG_USB_MUSB_DEBUG is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
-CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1016,6 +1052,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1023,15 +1060,10 @@
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -1040,7 +1072,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1048,7 +1080,6 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1056,38 +1087,75 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2272 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
#
-# USB DSL modem support
+# OTG and related infrastructure
#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=y
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
-CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
-CONFIG_SDH_BFIN=y
+# CONFIG_MMC_SDHCI is not set
+CONFIG_SDH_BFIN=m
+# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
+# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
# CONFIG_MMC_SPI is not set
-# CONFIG_SPI_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
#
# RTC interfaces
@@ -1111,66 +1179,74 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_BFIN=y
-
-#
-# Userspace I/O
-#
+CONFIG_RTC_DRV_BFIN=m
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_STAGING is not set
#
# File systems
#
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
@@ -1194,10 +1270,7 @@
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1205,17 +1278,7 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_YAFFS_FS=m
-CONFIG_YAFFS_YAFFS1=y
-# CONFIG_YAFFS_DOES_ECC is not set
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
@@ -1227,34 +1290,30 @@
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=y
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
@@ -1267,24 +1326,8 @@
#
# Partition Types
#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
+# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@@ -1326,9 +1369,6 @@
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1336,14 +1376,39 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_MMRS=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
+# CONFIG_DEBUG_MMRS is not set
+# CONFIG_DEBUG_DOUBLEFAULT is not set
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -1352,33 +1417,125 @@
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index bae4ee6..a6df01d 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -1,15 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24.4
-# Tue Apr 1 10:50:11 2008
+# Linux kernel version: 2.6.30.5
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
@@ -17,6 +16,9 @@
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -27,62 +29,83 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -99,6 +122,7 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
#
# Blackfin Processor Options
@@ -107,6 +131,10 @@
#
# Processor and Board Settings
#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
# CONFIG_BF522 is not set
# CONFIG_BF523 is not set
# CONFIG_BF524 is not set
@@ -119,30 +147,47 @@
# CONFIG_BF534 is not set
# CONFIG_BF536 is not set
# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
CONFIG_BF561=y
+# CONFIG_SMP is not set
+CONFIG_BF_REV_MIN=3
+CONFIG_BF_REV_MAX=5
# CONFIG_BF_REV_0_0 is not set
# CONFIG_BF_REV_0_1 is not set
# CONFIG_BF_REV_0_2 is not set
CONFIG_BF_REV_0_3=y
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
-CONFIG_BFIN_DUAL_CORE=y
CONFIG_MEM_MT48LC8M32B2B5_7=y
CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_SPORT0_ERROR=7
CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_TIMER0=10
+CONFIG_IRQ_TIMER1=10
+CONFIG_IRQ_TIMER2=10
+CONFIG_IRQ_TIMER3=10
+CONFIG_IRQ_TIMER4=10
+CONFIG_IRQ_TIMER5=10
+CONFIG_IRQ_TIMER6=10
+CONFIG_IRQ_TIMER7=10
CONFIG_IRQ_SPI_ERROR=7
# CONFIG_BFIN561_EZKIT is not set
# CONFIG_BFIN561_TEPLA is not set
CONFIG_BFIN561_BLUETECHNIX_CM=y
-# CONFIG_GENERIC_BF561_BOARD is not set
#
# BF561 Specific Configuration
@@ -151,12 +196,7 @@
#
# Core B Support
#
-
-#
-# Core B Support
-#
CONFIG_BF561_COREB=y
-# CONFIG_BF561_COREB_RESET is not set
#
# Interrupt Priority Assignment
@@ -196,14 +236,6 @@
CONFIG_IRQ_DMA2_9=9
CONFIG_IRQ_DMA2_10=9
CONFIG_IRQ_DMA2_11=9
-CONFIG_IRQ_TIMER0=10
-CONFIG_IRQ_TIMER1=10
-CONFIG_IRQ_TIMER2=10
-CONFIG_IRQ_TIMER3=10
-CONFIG_IRQ_TIMER4=10
-CONFIG_IRQ_TIMER5=10
-CONFIG_IRQ_TIMER6=10
-CONFIG_IRQ_TIMER7=10
CONFIG_IRQ_TIMER8=10
CONFIG_IRQ_TIMER9=10
CONFIG_IRQ_TIMER10=10
@@ -226,6 +258,7 @@
# Board customizations
#
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
#
# Clock/PLL Setup
@@ -245,19 +278,20 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_TICK_ONESHOT is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
-# Memory Setup
+# Misc
#
-CONFIG_MAX_MEM_SIZE=32
-CONFIG_BOOT_LOAD=0x1000
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -284,6 +318,12 @@
CONFIG_CACHELINE_ALIGNED_L1=y
CONFIG_SYSCALL_TAB_L1=y
CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
@@ -292,14 +332,16 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
-CONFIG_LARGE_ALLOCS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
# CONFIG_BFIN_GPTIMERS is not set
+# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
# CONFIG_DMA_UNCACHED_NONE is not set
@@ -308,15 +350,16 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+# CONFIG_BFIN_L2_ICACHEABLE is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
-CONFIG_BFIN_EXTMEM_WRITEBACK=y
-# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
-# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_EXTMEM_WRITEBACK is not set
+CONFIG_BFIN_EXTMEM_WRITETHROUGH=y
# CONFIG_BFIN_L2_DCACHEABLE is not set
+# CONFIG_BFIN_L2_WRITEBACK is not set
+# CONFIG_BFIN_L2_WRITETHROUGH is not set
#
# Memory Protection Unit
@@ -324,7 +367,7 @@
# CONFIG_MPU is not set
#
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
#
#
@@ -353,8 +396,8 @@
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
-# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
#
# Executable file formats
@@ -363,18 +406,19 @@
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
#
-# Networking
+# CPU Frequency scaling
#
+# CONFIG_CPU_FREQ is not set
CONFIG_NET=y
#
@@ -383,10 +427,6 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -407,14 +447,11 @@
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
-CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -423,6 +460,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -432,24 +470,21 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -460,16 +495,22 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -487,8 +528,10 @@
#
# RAM/ROM/Flash chip drivers
#
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -499,20 +542,29 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
+CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_UCLINUX=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -528,6 +580,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -539,14 +596,21 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
-# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE0 is not set
-# CONFIG_BFIN_IDE_ADDRESS_MAPPING_MODE1 is not set
#
# SCSI device support
@@ -558,26 +622,50 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_SMC91X=y
-# CONFIG_SMSC911X is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMSC911X=m
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
-# CONFIG_AX88180 is not set
# CONFIG_NETDEV_10000 is not set
#
@@ -585,10 +673,13 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -609,16 +700,15 @@
#
# Character devices
#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPI_ADC is not set
# CONFIG_BFIN_SPORT is not set
-# CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_SIMPLE_GPIO is not set
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -629,6 +719,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_DMA=y
@@ -639,6 +730,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
#
@@ -647,54 +739,100 @@
# CONFIG_CAN4LINUX is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
#
-# SPI support
+# Memory mapped GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -709,42 +847,85 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# Enable Host or Gadget support to see Inventra options
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+CONFIG_USB_GADGET_NET2272=y
+CONFIG_USB_NET2272=m
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# USB Gadget Support
+# MMC/SD/SDIO Card Drivers
#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -754,25 +935,29 @@
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -781,8 +966,11 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -794,10 +982,7 @@
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -805,14 +990,28 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
@@ -827,11 +1026,47 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -839,14 +1074,40 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_DOUBLEFAULT is not set
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -855,33 +1116,40 @@
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DUAL_CORE_TEST_MODULE is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index a6a7c8e..bc7fae3 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -67,6 +67,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
@@ -249,6 +250,7 @@
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=y
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 1ec9ae2..a7e49d6 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -68,6 +68,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
@@ -261,6 +262,7 @@
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
# CONFIG_BFIN_GPTIMERS is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index ff377fa..67d1276 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -63,6 +63,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
@@ -285,6 +286,7 @@
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_BFIN_GPTIMERS=y
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 814f9ca..52bfa6b 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -72,6 +72,7 @@
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
@@ -271,6 +272,7 @@
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_LARGE_ALLOCS=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
CONFIG_DMA_UNCACHED_2M=y
# CONFIG_DMA_UNCACHED_1M is not set
# CONFIG_DMA_UNCACHED_NONE is not set
@@ -700,7 +702,7 @@
# CONFIG_INPUT_YEALINK is not set
CONFIG_INPUT_UINPUT=y
# CONFIG_BF53X_PFBUTTONS is not set
-# CONFIG_TWI_KEYPAD is not set
+# CONFIG_INPUT_PCF8574 is not set
#
# Hardware I/O ports
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 375e75a..60adfad 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -1,13 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Jan 6 09:22:17 2009
+# Linux kernel version: 2.6.30.5
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
+CONFIG_GENERIC_BUG=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
@@ -16,6 +16,9 @@
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -26,49 +29,72 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_AIO is not set
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_MMAP_ALLOW_UNINITIALIZED=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -76,11 +102,8 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -96,7 +119,6 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
@@ -128,10 +150,15 @@
# CONFIG_BF538 is not set
# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
CONFIG_BF_REV_MIN=2
CONFIG_BF_REV_MAX=3
@@ -173,11 +200,11 @@
CONFIG_IRQ_WATCH=13
CONFIG_IRQ_SPI=10
# CONFIG_BFIN537_STAMP is not set
-# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_E is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM_U is not set
CONFIG_BFIN537_BLUETECHNIX_TCM=y
# CONFIG_PNAV10 is not set
# CONFIG_CAMSIG_MINOTAUR is not set
-# CONFIG_GENERIC_BF537_BOARD is not set
#
# BF537 Specific Configuration
@@ -223,7 +250,10 @@
# CONFIG_SCHED_HRTICK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_TICKSOURCE_GPTMR0 is not set
+CONFIG_TICKSOURCE_CORETMR=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_GPTMR0_CLOCKSOURCE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -273,10 +303,12 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
# CONFIG_BFIN_GPTIMERS is not set
# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
@@ -287,10 +319,9 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
-# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_EXTMEM_ICACHEABLE=y
CONFIG_BFIN_EXTMEM_DCACHEABLE=y
CONFIG_BFIN_EXTMEM_WRITEBACK=y
# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
@@ -301,7 +332,7 @@
# CONFIG_MPU is not set
#
-# Asynchonous Memory Configuration
+# Asynchronous Memory Configuration
#
#
@@ -327,6 +358,7 @@
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
#
# Executable file formats
@@ -343,13 +375,83 @@
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
-# CONFIG_NET is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -358,15 +460,21 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
@@ -402,9 +510,10 @@
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_PSD4256G is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
#
@@ -413,7 +522,7 @@
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_GPIO_ADDR=y
-CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -436,6 +545,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -443,15 +557,23 @@
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -464,6 +586,74 @@
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+# CONFIG_BFIN_MAC_RMII is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
@@ -480,15 +670,12 @@
#
# Character devices
#
-# CONFIG_AD9960 is not set
-# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PPIFCD is not set
-# CONFIG_BFIN_SIMPLE_TIMER is not set
-# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_SPORT=y
-# CONFIG_BFIN_TIMER_LATENCY is not set
CONFIG_BFIN_DMA_INTERFACE=m
-# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_BFIN_PPI is not set
+# CONFIG_BFIN_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BFIN_SPI_ADC is not set
+CONFIG_BFIN_SPORT=y
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_BFIN_JTAG_COMM is not set
@@ -502,6 +689,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_BFIN=y
CONFIG_SERIAL_BFIN_CONSOLE=y
CONFIG_SERIAL_BFIN_DMA=y
@@ -514,6 +702,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
#
@@ -534,39 +723,17 @@
#
CONFIG_SPI_BFIN=y
# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BFIN_SPORT is not set
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-CONFIG_GPIO_SYSFS=y
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -580,6 +747,12 @@
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_BFIN_WDT=y
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -588,7 +761,7 @@
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8400 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -598,6 +771,7 @@
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
@@ -618,13 +792,81 @@
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+CONFIG_USB_GADGET_NET2272=y
+CONFIG_USB_NET2272=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -641,8 +883,10 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -652,6 +896,11 @@
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -660,8 +909,11 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -673,10 +925,7 @@
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -684,9 +933,19 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -695,13 +954,62 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
@@ -714,12 +1022,30 @@
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_DEBUG_VERBOSE=y
@@ -733,9 +1059,10 @@
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_EARLY_PRINTK=y
CONFIG_CPLB_INFO=y
CONFIG_ACCESS_CHECK=y
+# CONFIG_BFIN_ISRAM_SELF_TEST is not set
#
# Security options
@@ -744,20 +1071,110 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
index 10064f9..e6485c3 100644
--- a/arch/blackfin/include/asm/bfin-global.h
+++ b/arch/blackfin/include/asm/bfin-global.h
@@ -11,9 +11,6 @@
#ifndef __ASSEMBLY__
-#include <asm/sections.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
#include <linux/linkage.h>
#include <linux/types.h>
@@ -23,6 +20,12 @@
# define DMA_UNCACHED_REGION (2 * 1024 * 1024)
#elif defined(CONFIG_DMA_UNCACHED_1M)
# define DMA_UNCACHED_REGION (1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_512K)
+# define DMA_UNCACHED_REGION (512 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_256K)
+# define DMA_UNCACHED_REGION (256 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_128K)
+# define DMA_UNCACHED_REGION (128 * 1024)
#else
# define DMA_UNCACHED_REGION (0)
#endif
@@ -35,6 +38,7 @@
extern unsigned long sclk_to_usecs(unsigned long sclk);
extern unsigned long usecs_to_sclk(unsigned long usecs);
+struct pt_regs;
extern void dump_bfin_process(struct pt_regs *regs);
extern void dump_bfin_mem(struct pt_regs *regs);
extern void dump_bfin_trace_buffer(void);
diff --git a/arch/blackfin/include/asm/bug.h b/arch/blackfin/include/asm/bug.h
index 6f4548a..75f6dc3 100644
--- a/arch/blackfin/include/asm/bug.h
+++ b/arch/blackfin/include/asm/bug.h
@@ -47,7 +47,7 @@
#define BUG() \
do { \
_BUG_OR_WARN(0); \
- for (;;); \
+ unreachable(); \
} while (0)
#define WARN_ON(condition) \
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index 417eaac..2666ff8 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -10,6 +10,7 @@
#define _BLACKFIN_CACHEFLUSH_H
#include <asm/blackfin.h> /* for SSYNC() */
+#include <asm/sections.h> /* for _ramend */
extern void blackfin_icache_flush_range(unsigned long start_address, unsigned long end_address);
extern void blackfin_dcache_flush_range(unsigned long start_address, unsigned long end_address);
diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h
index a23415b..623cc7f 100644
--- a/arch/blackfin/include/asm/checksum.h
+++ b/arch/blackfin/include/asm/checksum.h
@@ -9,63 +9,12 @@
#define _BFIN_CHECKSUM_H
/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-__wsum csum_partial_copy(const void *src, void *dst,
- int len, __wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *csum_err);
-
-#define csum_partial_copy_nocheck(src, dst, len, sum) \
- csum_partial_copy((src), (dst), (len), (sum))
-
-__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl);
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- while (sum >> 16)
- sum = (sum & 0xffff) + (sum >> 16);
- return ((~(sum << 16)) >> 16);
-}
-
-/*
* computes the checksum of the TCP/UDP pseudo-header
* returns a 16-bit checksum, already complemented
*/
static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+__csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
unsigned int carry;
@@ -88,19 +37,8 @@
return (sum);
}
+#define csum_tcpudp_nofold __csum_tcpudp_nofold
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
+#include <asm-generic/checksum.h>
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#endif /* _BFIN_CHECKSUM_H */
+#endif
diff --git a/arch/blackfin/include/asm/clocks.h b/arch/blackfin/include/asm/clocks.h
index f80dad5..6f0b618 100644
--- a/arch/blackfin/include/asm/clocks.h
+++ b/arch/blackfin/include/asm/clocks.h
@@ -9,6 +9,8 @@
#ifndef _BFIN_CLOCKS_H
#define _BFIN_CLOCKS_H
+#include <asm/dpmc.h>
+
#ifdef CONFIG_CCLK_DIV_1
# define CONFIG_CCLK_ACT_DIV CCLK_DIV1
# define CONFIG_CCLK_DIV 1
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index 7a23d82..f9172ff 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -7,9 +7,9 @@
#ifndef _BLACKFIN_DMA_MAPPING_H
#define _BLACKFIN_DMA_MAPPING_H
-#include <asm/scatterlist.h>
+#include <asm/cacheflush.h>
+struct scatterlist;
-void dma_alloc_init(unsigned long start, unsigned long end);
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp);
void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
@@ -20,13 +20,51 @@
*/
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_supported(d, m) (1)
+#define dma_get_cache_alignment() (32)
+#define dma_is_consistent(d, h) (1)
-static inline
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+ return -EIO;
+
+ *dev->dma_mask = dma_mask;
+
+ return 0;
+}
+
+static inline int
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
return 0;
}
+extern void
+__dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir);
+static inline void
+_dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+ if (!__builtin_constant_p(dir)) {
+ __dma_sync(addr, size, dir);
+ return;
+ }
+
+ switch (dir) {
+ case DMA_NONE:
+ BUG();
+ case DMA_TO_DEVICE: /* writeback only */
+ flush_dcache_range(addr, addr + size);
+ break;
+ case DMA_FROM_DEVICE: /* invalidate only */
+ case DMA_BIDIRECTIONAL: /* flush and invalidate */
+ /* Blackfin has no dedicated invalidate (it includes a flush) */
+ invalidate_dcache_range(addr, addr + size);
+ break;
+ }
+}
+
/*
* Map a single buffer of the indicated size for DMA in streaming mode.
* The 32-bit bus address to use is returned.
@@ -34,8 +72,13 @@
* Once the device is given the dma address, the device owns this memory
* until either pci_unmap_single or pci_dma_sync_single is performed.
*/
-extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
- enum dma_data_direction direction);
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction dir)
+{
+ _dma_sync((dma_addr_t)ptr, size, dir);
+ return (dma_addr_t) ptr;
+}
static inline dma_addr_t
dma_map_page(struct device *dev, struct page *page,
@@ -53,8 +96,12 @@
* After this call, reads by the cpu to the buffer are guarenteed to see
* whatever the device wrote there.
*/
-extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction direction);
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction dir)
+{
+ BUG_ON(!valid_dma_direction(dir));
+}
static inline void
dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
@@ -80,38 +127,66 @@
* the same here.
*/
extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction direction);
+ enum dma_data_direction dir);
/*
* Unmap a set of streaming mode DMA translations.
* Again, cpu read rules concerning calls here are the same as for
* pci_unmap_single() above.
*/
-extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nhwentries, enum dma_data_direction direction);
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nhwentries, enum dma_data_direction dir)
{
+ BUG_ON(!valid_dma_direction(dir));
}
-static inline void dma_sync_single_for_device(struct device *dev,
- dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
+ BUG_ON(!valid_dma_direction(dir));
}
-static inline void dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sg,
- int nents, enum dma_data_direction dir)
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
+ _dma_sync(handle + offset, size, dir);
}
-static inline void dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg,
- int nents, enum dma_data_direction dir)
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
+ enum dma_data_direction dir)
{
+ dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync_single_range_for_device(dev, handle, 0, size, dir);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction dir)
+{
+ BUG_ON(!valid_dma_direction(dir));
+}
+
+extern void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir);
+
+static inline void
+dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ _dma_sync((dma_addr_t)vaddr, size, dir);
}
#endif /* _BLACKFIN_DMA_MAPPING_H */
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index c9a5962..bd2e622 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -10,46 +10,70 @@
#include <linux/interrupt.h>
#include <mach/dma.h>
+#include <asm/atomic.h>
#include <asm/blackfin.h>
#include <asm/page.h>
+#include <asm-generic/dma.h>
-#define MAX_DMA_ADDRESS PAGE_OFFSET
+/* DMA_CONFIG Masks */
+#define DMAEN 0x0001 /* DMA Channel Enable */
+#define WNR 0x0002 /* Channel Direction (W/R*) */
+#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
+#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
+#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
+#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
+#define RESTART 0x0020 /* DMA Buffer Clear */
+#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
+#define DI_EN 0x0080 /* Data Interrupt Enable */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
+#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
+#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
+#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
+#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
+#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
+#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
+#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
+#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
+#define NDSIZE 0x0f00 /* Next Descriptor Size */
+#define DMAFLOW 0x7000 /* Flow Control */
+#define DMAFLOW_STOP 0x0000 /* Stop Mode */
+#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
+#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
+#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
-/*****************************************************************************
-* Generic DMA Declarations
-*
-****************************************************************************/
-enum dma_chan_status {
- DMA_CHANNEL_FREE,
- DMA_CHANNEL_REQUESTED,
- DMA_CHANNEL_ENABLED,
-};
+/* DMA_IRQ_STATUS Masks */
+#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
+#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
+#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
+#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
/*-------------------------
* config reg bits value
*-------------------------*/
-#define DATA_SIZE_8 0
-#define DATA_SIZE_16 1
-#define DATA_SIZE_32 2
+#define DATA_SIZE_8 0
+#define DATA_SIZE_16 1
+#define DATA_SIZE_32 2
-#define DMA_FLOW_STOP 0
-#define DMA_FLOW_AUTO 1
-#define DMA_FLOW_ARRAY 4
-#define DMA_FLOW_SMALL 6
-#define DMA_FLOW_LARGE 7
+#define DMA_FLOW_STOP 0
+#define DMA_FLOW_AUTO 1
+#define DMA_FLOW_ARRAY 4
+#define DMA_FLOW_SMALL 6
+#define DMA_FLOW_LARGE 7
-#define DIMENSION_LINEAR 0
-#define DIMENSION_2D 1
+#define DIMENSION_LINEAR 0
+#define DIMENSION_2D 1
-#define DIR_READ 0
-#define DIR_WRITE 1
+#define DIR_READ 0
+#define DIR_WRITE 1
-#define INTR_DISABLE 0
-#define INTR_ON_BUF 2
-#define INTR_ON_ROW 3
+#define INTR_DISABLE 0
+#define INTR_ON_BUF 2
+#define INTR_ON_ROW 3
#define DMA_NOSYNC_KEEP_DMA_BUF 0
-#define DMA_SYNC_RESTART 1
+#define DMA_SYNC_RESTART 1
struct dmasg {
void *next_desc_addr;
@@ -104,11 +128,9 @@
};
-struct mutex;
struct dma_channel {
- struct mutex dmalock;
const char *device_id;
- enum dma_chan_status chan_status;
+ atomic_t chan_status;
volatile struct dma_register *regs;
struct dmasg *sg; /* large mode descriptor */
unsigned int irq;
@@ -220,27 +242,20 @@
static inline int dma_channel_active(unsigned int channel)
{
- if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE)
- return 0;
- else
- return 1;
+ return atomic_read(&dma_ch[channel].chan_status);
}
static inline void disable_dma(unsigned int channel)
{
dma_ch[channel].regs->cfg &= ~DMAEN;
SSYNC();
- dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
}
static inline void enable_dma(unsigned int channel)
{
dma_ch[channel].regs->curr_x_count = 0;
dma_ch[channel].regs->curr_y_count = 0;
dma_ch[channel].regs->cfg |= DMAEN;
- dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED;
}
-void free_dma(unsigned int channel);
-int request_dma(unsigned int channel, const char *device_id);
int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data);
static inline void dma_disable_irq(unsigned int channel)
diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index 925e66c..1597ae5 100644
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -1,7 +1,7 @@
/*
* Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
*
- * Copyright (C) 2004-2008 Analog Device Inc.
+ * Copyright (C) 2004-2009 Analog Device Inc.
*
* Licensed under the GPL-2
*/
@@ -9,7 +9,109 @@
#ifndef _BLACKFIN_DPMC_H_
#define _BLACKFIN_DPMC_H_
-#ifdef __KERNEL__
+/* PLL_CTL Masks */
+#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
+#define PLL_OFF 0x0002 /* PLL Not Powered */
+#define STOPCK 0x0008 /* Core Clock Off */
+#define PDWN 0x0020 /* Enter Deep Sleep Mode */
+#ifdef __ADSPBF539__
+# define IN_DELAY 0x0014 /* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY 0x00C0 /* Add 200ps Delay To EBIU Output Signals */
+#else
+# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
+#endif
+#define BYPASS 0x0100 /* Bypass the PLL */
+#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
+#define SPORT_HYST 0x8000 /* Enable Additional Hysteresis on SPORT Input Pins */
+#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
+
+/* PLL_DIV Masks */
+#define SSEL 0x000F /* System Select */
+#define CSEL 0x0030 /* Core Select */
+#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
+#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
+#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
+#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
+
+#define CCLK_DIV1 CSEL_DIV1
+#define CCLK_DIV2 CSEL_DIV2
+#define CCLK_DIV4 CSEL_DIV4
+#define CCLK_DIV8 CSEL_DIV8
+
+#define SET_SSEL(x) ((x) & 0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
+#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
+#define FULL_ON 0x0002 /* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
+
+#define RTCWS 0x0400 /* RTC/Reset Wake-Up Status */
+#define CANWS 0x0800 /* CAN Wake-Up Status */
+#define USBWS 0x2000 /* USB Wake-Up Status */
+#define KPADWS 0x4000 /* Keypad Wake-Up Status */
+#define ROTWS 0x8000 /* Rotary Wake-Up Status */
+#define GPWS 0x1000 /* General-Purpose Wake-Up Status */
+
+/* VR_CTL Masks */
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
+#define FREQ_1000 0x3000 /* Switching Frequency Is 1 MHz */
+#else
+#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
+#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
+#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
+#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
+#endif
+#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
+
+#define GAIN 0x000C /* Voltage Level Gain */
+#define GAIN_5 0x0000 /* GAIN = 5 */
+#define GAIN_10 0x0004 /* GAIN = 1 */
+#define GAIN_20 0x0008 /* GAIN = 2 */
+#define GAIN_50 0x000C /* GAIN = 5 */
+
+#define VLEV 0x00F0 /* Internal Voltage Level */
+#ifdef __ADSPBF52x__
+#define VLEV_085 0x0040 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0050 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0060 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0070 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x0080 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x0090 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00A0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00B0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#else
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
+#endif
+
+#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
+#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */
+#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
+#define GPWE 0x0400 /* General-Purpose Wake-Up Enable */
+#define MXVRWE 0x0400 /* Enable MXVR Wakeup From Hibernate */
+#define KPADWE 0x1000 /* Keypad Wake-Up Enable */
+#define ROTWE 0x2000 /* Rotary Wake-Up Enable */
+#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
+#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
+
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */
+#else
+#define USBWE 0x0800 /* Enable USB Wakeup From Hibernate */
+#endif
+
#ifndef __ASSEMBLY__
void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
@@ -54,6 +156,5 @@
w[P0 + (x - PLL_CTL)] = R0;\
#endif
-#endif /* __KERNEL__ */
#endif /*_BLACKFIN_DPMC_H_*/
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 5b44d05..539468a 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -159,6 +159,11 @@
};
#endif
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+void bfin_special_gpio_free(unsigned gpio);
+int bfin_special_gpio_request(unsigned gpio, const char *label);
+#endif
+
#ifdef CONFIG_PM
unsigned int bfin_pm_standby_setup(void);
diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h
index 89f08de..c722acd 100644
--- a/arch/blackfin/include/asm/gptimers.h
+++ b/arch/blackfin/include/asm/gptimers.h
@@ -172,25 +172,25 @@
/* The actual gptimer API */
-void set_gptimer_pwidth(int timer_id, uint32_t width);
-uint32_t get_gptimer_pwidth(int timer_id);
-void set_gptimer_period(int timer_id, uint32_t period);
-uint32_t get_gptimer_period(int timer_id);
-uint32_t get_gptimer_count(int timer_id);
-int get_gptimer_intr(int timer_id);
-void clear_gptimer_intr(int timer_id);
-int get_gptimer_over(int timer_id);
-void clear_gptimer_over(int timer_id);
-void set_gptimer_config(int timer_id, uint16_t config);
-uint16_t get_gptimer_config(int timer_id);
-int get_gptimer_run(int timer_id);
-void set_gptimer_pulse_hi(int timer_id);
-void clear_gptimer_pulse_hi(int timer_id);
+void set_gptimer_pwidth(unsigned int timer_id, uint32_t width);
+uint32_t get_gptimer_pwidth(unsigned int timer_id);
+void set_gptimer_period(unsigned int timer_id, uint32_t period);
+uint32_t get_gptimer_period(unsigned int timer_id);
+uint32_t get_gptimer_count(unsigned int timer_id);
+int get_gptimer_intr(unsigned int timer_id);
+void clear_gptimer_intr(unsigned int timer_id);
+int get_gptimer_over(unsigned int timer_id);
+void clear_gptimer_over(unsigned int timer_id);
+void set_gptimer_config(unsigned int timer_id, uint16_t config);
+uint16_t get_gptimer_config(unsigned int timer_id);
+int get_gptimer_run(unsigned int timer_id);
+void set_gptimer_pulse_hi(unsigned int timer_id);
+void clear_gptimer_pulse_hi(unsigned int timer_id);
void enable_gptimers(uint16_t mask);
void disable_gptimers(uint16_t mask);
void disable_gptimers_sync(uint16_t mask);
uint16_t get_enabled_gptimers(void);
-uint32_t get_gptimer_status(int group);
-void set_gptimer_status(int group, uint32_t value);
+uint32_t get_gptimer_status(unsigned int group);
+void set_gptimer_status(unsigned int group, uint32_t value);
#endif
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index d1f5029..29e55b9 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -31,12 +31,14 @@
unsigned int val;
int tmp;
- __asm__ __volatile__ ("cli %1;\n\t"
- "NOP; NOP; SSYNC;\n\t"
- "%0 = b [%2] (z);\n\t"
- "sti %1;\n\t"
- : "=d"(val), "=d"(tmp): "a"(addr)
- );
+ __asm__ __volatile__ (
+ "cli %1;"
+ "NOP; NOP; SSYNC;"
+ "%0 = b [%2] (z);"
+ "sti %1;"
+ : "=d"(val), "=d"(tmp)
+ : "a"(addr)
+ );
return (unsigned char) val;
}
@@ -46,12 +48,14 @@
unsigned int val;
int tmp;
- __asm__ __volatile__ ("cli %1;\n\t"
- "NOP; NOP; SSYNC;\n\t"
- "%0 = w [%2] (z);\n\t"
- "sti %1;\n\t"
- : "=d"(val), "=d"(tmp): "a"(addr)
- );
+ __asm__ __volatile__ (
+ "cli %1;"
+ "NOP; NOP; SSYNC;"
+ "%0 = w [%2] (z);"
+ "sti %1;"
+ : "=d"(val), "=d"(tmp)
+ : "a"(addr)
+ );
return (unsigned short) val;
}
@@ -61,20 +65,23 @@
unsigned int val;
int tmp;
- __asm__ __volatile__ ("cli %1;\n\t"
- "NOP; NOP; SSYNC;\n\t"
- "%0 = [%2];\n\t"
- "sti %1;\n\t"
- : "=d"(val), "=d"(tmp): "a"(addr)
- );
+ __asm__ __volatile__ (
+ "cli %1;"
+ "NOP; NOP; SSYNC;"
+ "%0 = [%2];"
+ "sti %1;"
+ : "=d"(val), "=d"(tmp)
+ : "a"(addr)
+ );
+
return val;
}
#endif /* __ASSEMBLY__ */
-#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
#define __raw_readb readb
#define __raw_readw readw
@@ -82,9 +89,9 @@
#define __raw_writeb writeb
#define __raw_writew writew
#define __raw_writel writel
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
+#define memset_io(a, b, c) memset((void *)(a), (b), (c))
+#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
/* Convert "I/O port addresses" to actual addresses. i.e. ugly casts. */
#define __io(port) ((void *)(unsigned long)(port))
@@ -92,30 +99,30 @@
#define inb(port) readb(__io(port))
#define inw(port) readw(__io(port))
#define inl(port) readl(__io(port))
-#define outb(x,port) writeb(x,__io(port))
-#define outw(x,port) writew(x,__io(port))
-#define outl(x,port) writel(x,__io(port))
+#define outb(x, port) writeb(x, __io(port))
+#define outw(x, port) writew(x, __io(port))
+#define outl(x, port) writel(x, __io(port))
#define inb_p(port) inb(__io(port))
#define inw_p(port) inw(__io(port))
#define inl_p(port) inl(__io(port))
-#define outb_p(x,port) outb(x,__io(port))
-#define outw_p(x,port) outw(x,__io(port))
-#define outl_p(x,port) outl(x,__io(port))
+#define outb_p(x, port) outb(x, __io(port))
+#define outw_p(x, port) outw(x, __io(port))
+#define outl_p(x, port) outl(x, __io(port))
-#define ioread8_rep(a,d,c) readsb(a,d,c)
-#define ioread16_rep(a,d,c) readsw(a,d,c)
-#define ioread32_rep(a,d,c) readsl(a,d,c)
-#define iowrite8_rep(a,s,c) writesb(a,s,c)
-#define iowrite16_rep(a,s,c) writesw(a,s,c)
-#define iowrite32_rep(a,s,c) writesl(a,s,c)
+#define ioread8_rep(a, d, c) readsb(a, d, c)
+#define ioread16_rep(a, d, c) readsw(a, d, c)
+#define ioread32_rep(a, d, c) readsl(a, d, c)
+#define iowrite8_rep(a, s, c) writesb(a, s, c)
+#define iowrite16_rep(a, s, c) writesw(a, s, c)
+#define iowrite32_rep(a, s, c) writesl(a, s, c)
-#define ioread8(X) readb(X)
-#define ioread16(X) readw(X)
-#define ioread32(X) readl(X)
-#define iowrite8(val,X) writeb(val,X)
-#define iowrite16(val,X) writew(val,X)
-#define iowrite32(val,X) writel(val,X)
+#define ioread8(x) readb(x)
+#define ioread16(x) readw(x)
+#define ioread32(x) readl(x)
+#define iowrite8(val, x) writeb(val, x)
+#define iowrite16(val, x) writew(val, x)
+#define iowrite32(val, x) writel(val, x)
#define mmiowb() wmb()
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 4617ba6..d3b4044 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,9 +35,9 @@
#include <asm/atomic.h>
#include <asm/traps.h>
-#define IPIPE_ARCH_STRING "1.11-00"
+#define IPIPE_ARCH_STRING "1.12-00"
#define IPIPE_MAJOR_NUMBER 1
-#define IPIPE_MINOR_NUMBER 11
+#define IPIPE_MINOR_NUMBER 12
#define IPIPE_PATCH_NUMBER 0
#ifdef CONFIG_SMP
@@ -124,16 +124,6 @@
return 1;
}
-static inline void __ipipe_lock_root(void)
-{
- set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
-}
-
-static inline void __ipipe_unlock_root(void)
-{
- clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
-}
-
void __ipipe_enable_pipeline(void);
#define __ipipe_hook_critical_ipi(ipd) do { } while (0)
diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h
index 490098f..0040920 100644
--- a/arch/blackfin/include/asm/ipipe_base.h
+++ b/arch/blackfin/include/asm/ipipe_base.h
@@ -51,23 +51,15 @@
extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
-#define __ipipe_stall_root() \
- do { \
- volatile unsigned long *p = &__ipipe_root_status; \
- set_bit(0, p); \
- } while (0)
+void __ipipe_stall_root(void);
-#define __ipipe_test_and_stall_root() \
- ({ \
- volatile unsigned long *p = &__ipipe_root_status; \
- test_and_set_bit(0, p); \
- })
+unsigned long __ipipe_test_and_stall_root(void);
-#define __ipipe_test_root() \
- ({ \
- const unsigned long *p = &__ipipe_root_status; \
- test_bit(0, p); \
- })
+unsigned long __ipipe_test_root(void);
+
+void __ipipe_lock_root(void);
+
+void __ipipe_unlock_root(void);
#endif /* !__ASSEMBLY__ */
diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h
index 9b19a19..813a1af 100644
--- a/arch/blackfin/include/asm/irqflags.h
+++ b/arch/blackfin/include/asm/irqflags.h
@@ -33,6 +33,7 @@
#ifdef CONFIG_IPIPE
+#include <linux/compiler.h>
#include <linux/ipipe_base.h>
#include <linux/ipipe_trace.h>
@@ -49,12 +50,12 @@
barrier(); \
} while (0)
-static inline void raw_local_irq_enable(void)
-{
- barrier();
- ipipe_check_context(ipipe_root_domain);
- __ipipe_unstall_root();
-}
+#define raw_local_irq_enable() \
+ do { \
+ barrier(); \
+ ipipe_check_context(ipipe_root_domain); \
+ __ipipe_unstall_root(); \
+ } while (0)
#define raw_local_save_flags_ptr(x) \
do { \
diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h
index c8b256d..8651afe 100644
--- a/arch/blackfin/include/asm/kgdb.h
+++ b/arch/blackfin/include/asm/kgdb.h
@@ -10,9 +10,6 @@
#include <linux/ptrace.h>
-/* gdb locks */
-#define KGDB_MAX_NO_CPUS 8
-
/*
* BUFMAX defines the maximum number of characters in inbound/outbound buffers.
* At least NUMREGBYTES*2 are needed for register packets.
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index 4179e32..7c8fe83 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -295,156 +295,3 @@
#else
#define PLL_BYPASS 0
#endif
-
-/***************************************Currently Not Being Used *********************************/
-
-#if defined(CONFIG_FLASH_SPEED_BWAT) && \
-defined(CONFIG_FLASH_SPEED_BRAT) && \
-defined(CONFIG_FLASH_SPEED_BHT) && \
-defined(CONFIG_FLASH_SPEED_BST) && \
-defined(CONFIG_FLASH_SPEED_BTT)
-
-#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0 \
- (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
- flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
-#endif
diff --git a/arch/blackfin/include/asm/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
index 4a3be37..ae8ef4f 100644
--- a/arch/blackfin/include/asm/mmu_context.h
+++ b/arch/blackfin/include/asm/mmu_context.h
@@ -66,8 +66,8 @@
#define activate_mm(prev, next) switch_mm(prev, next, NULL)
-static inline void switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
- struct task_struct *tsk)
+static inline void __switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
+ struct task_struct *tsk)
{
#ifdef CONFIG_MPU
unsigned int cpu = smp_processor_id();
@@ -95,7 +95,24 @@
#endif
}
+#ifdef CONFIG_IPIPE
+#define lock_mm_switch(flags) local_irq_save_hw_cond(flags)
+#define unlock_mm_switch(flags) local_irq_restore_hw_cond(flags)
+#else
+#define lock_mm_switch(flags) do { (void)(flags); } while (0)
+#define unlock_mm_switch(flags) do { (void)(flags); } while (0)
+#endif /* CONFIG_IPIPE */
+
#ifdef CONFIG_MPU
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ unsigned long flags;
+ lock_mm_switch(flags);
+ __switch_mm(prev, next, tsk);
+ unlock_mm_switch(flags);
+}
+
static inline void protect_page(struct mm_struct *mm, unsigned long addr,
unsigned long flags)
{
@@ -128,6 +145,12 @@
set_mask_dcplbs(mm->context.page_rwx_mask, cpu);
}
}
+#else /* !CONFIG_MPU */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ __switch_mm(prev, next, tsk);
+}
#endif
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
@@ -173,4 +196,10 @@
#endif
}
+#define ipipe_mm_switch_protect(flags) \
+ local_irq_save_hw_cond(flags)
+
+#define ipipe_mm_switch_unprotect(flags) \
+ local_irq_restore_hw_cond(flags)
+
#endif
diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h
index 6127735..99cae2e 100644
--- a/arch/blackfin/include/asm/pci.h
+++ b/arch/blackfin/include/asm/pci.h
@@ -4,145 +4,19 @@
#define _ASM_BFIN_PCI_H
#include <asm/scatterlist.h>
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci.h>
-/*
- *
- * Written by Wout Klaren.
- */
-
-/* Added by Chang Junxiao */
#define PCIBIOS_MIN_IO 0x00001000
#define PCIBIOS_MIN_MEM 0x10000000
-#define PCI_DMA_BUS_IS_PHYS (1)
-struct pci_ops;
-
-/*
- * Structure with hardware dependent information and functions of the
- * PCI bus.
- */
-struct pci_bus_info {
-
- /*
- * Resources of the PCI bus.
- */
- struct resource mem_space;
- struct resource io_space;
-
- /*
- * System dependent functions.
- */
- struct pci_ops *bfin_pci_ops;
- void (*fixup) (int pci_modify);
- void (*conf_device) (unsigned char bus, unsigned char device_fn);
-};
-
-#define pcibios_assign_all_busses() 0
static inline void pcibios_set_master(struct pci_dev *dev)
{
-
/* No special bus mastering setup handling */
}
static inline void pcibios_penalize_isa_irq(int irq)
{
-
/* We don't do dynamic PCI IRQ allocation */
}
-static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr,
- size_t size, int direction)
-{
- if (direction == PCI_DMA_NONE)
- BUG();
-
- /* return virt_to_bus(ptr); */
- return (dma_addr_t) ptr;
-}
-
-/* Unmap a single streaming mode DMA translation. The dma_addr and size
- * must match what was provided for in a previous pci_map_single call. All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
-static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
- size_t size, int direction)
-{
- if (direction == PCI_DMA_NONE)
- BUG();
-
- /* Nothing to do */
-}
-
-/* Map a set of buffers described by scatterlist in streaming
- * mode for DMA. This is the scather-gather version of the
- * above pci_map_single interface. Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length. They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- * DMA address/length pairs than there are SG table elements.
- * (for example via virtual mapping capabilities)
- * The routine returns the number of addr/length pairs actually
- * used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-static inline int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
- int nents, int direction)
-{
- if (direction == PCI_DMA_NONE)
- BUG();
- return nents;
-}
-
-/* Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-static inline void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
- int nents, int direction)
-{
- if (direction == PCI_DMA_NONE)
- BUG();
-
- /* Nothing to do */
-}
-
-/* Make physical memory consistent for a single
- * streaming mode DMA translation after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so. At the
- * next point you give the PCI dma address back to the card, the
- * device again owns the buffer.
- */
-static inline void pci_dma_sync_single(struct pci_dev *hwdev,
- dma_addr_t dma_handle, size_t size,
- int direction)
-{
- if (direction == PCI_DMA_NONE)
- BUG();
-
- /* Nothing to do */
-}
-
-/* Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as pci_dma_sync_single but for a scatter-gather list,
- * same rules and usage.
- */
-static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
- struct scatterlist *sg, int nelems,
- int direction)
-{
- if (direction == PCI_DMA_NONE)
- BUG();
-
- /* Nothing to do */
-}
#endif /* _ASM_BFIN_PCI_H */
diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h
index 27290c9..b33a448 100644
--- a/arch/blackfin/include/asm/ptrace.h
+++ b/arch/blackfin/include/asm/ptrace.h
@@ -89,9 +89,9 @@
#define PTRACE_GETREGS 12
#define PTRACE_SETREGS 13 /* ptrace signal */
-#define PTRACE_GETFDPIC 31
-#define PTRACE_GETFDPIC_EXEC 0
-#define PTRACE_GETFDPIC_INTERP 1
+#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */
+#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */
#define PS_S (0x0002)
diff --git a/arch/blackfin/include/asm/sections.h b/arch/blackfin/include/asm/sections.h
index 1f5381f..42f6c53 100644
--- a/arch/blackfin/include/asm/sections.h
+++ b/arch/blackfin/include/asm/sections.h
@@ -13,10 +13,18 @@
extern unsigned long _ramstart, _ramend, _rambase;
extern unsigned long memory_start, memory_end, physical_mem_end;
-extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
- _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
- _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
- _ebss_l2[], _l2_lma_start[];
+/*
+ * The weak markings on the lengths might seem weird, but this is required
+ * in order to make gcc accept the fact that these may actually have a value
+ * of 0 (since they aren't actually addresses, but sizes of sections).
+ */
+extern char _stext_l1[], _etext_l1[], _text_l1_lma[], __weak _text_l1_len[];
+extern char _sdata_l1[], _edata_l1[], _sbss_l1[], _ebss_l1[],
+ _data_l1_lma[], __weak _data_l1_len[];
+extern char _sdata_b_l1[], _edata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
+ _data_b_l1_lma[], __weak _data_b_l1_len[];
+extern char _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[],
+ _sbss_l2[], _ebss_l2[], _l2_lma[], __weak _l2_len[];
#include <asm/mem_map.h>
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index afb3a86..a40d936 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -103,11 +103,13 @@
#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
#define TIF_FREEZE 6 /* is freezing for suspend */
#define TIF_IRQ_SYNC 7 /* sync pipeline stage */
+#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
/* as above, but as bit values */
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1<<TIF_FREEZE)
diff --git a/arch/blackfin/include/asm/trace.h b/arch/blackfin/include/asm/trace.h
index 609ad3c..dc0aa55 100644
--- a/arch/blackfin/include/asm/trace.h
+++ b/arch/blackfin/include/asm/trace.h
@@ -28,6 +28,8 @@
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
+#define trace_buffer_init() bfin_write_TBUFCTL(BFIN_TRACE_INIT)
+
#define trace_buffer_save(x) \
do { \
(x) = bfin_read_TBUFCTL(); \
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index c03b853..1c0d190 100644
--- a/arch/blackfin/include/asm/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -17,9 +17,7 @@
#include <linux/string.h>
#include <asm/segment.h>
-#ifdef CONFIG_ACCESS_CHECK
-# include <asm/bfin-global.h>
-#endif
+#include <asm/sections.h>
#define get_ds() (KERNEL_DS)
#define get_fs() (current_thread_info()->addr_limit)
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index 779be02..22886cb 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -388,8 +388,9 @@
#define __NR_pwritev 367
#define __NR_rt_tgsigqueueinfo 368
#define __NR_perf_event_open 369
+#define __NR_recvmmsg 370
-#define __NR_syscall 370
+#define __NR_syscall 371
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 3946aff..924c002 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -37,9 +37,8 @@
printk(KERN_INFO "Blackfin DMA Controller\n");
for (i = 0; i < MAX_DMA_CHANNELS; i++) {
- dma_ch[i].chan_status = DMA_CHANNEL_FREE;
+ atomic_set(&dma_ch[i].chan_status, 0);
dma_ch[i].regs = dma_io_base_addr[i];
- mutex_init(&(dma_ch[i].dmalock));
}
/* Mark MEMDMA Channel 0 as requested since we're using it internally */
request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy");
@@ -60,7 +59,7 @@
int i;
for (i = 0; i < MAX_DMA_CHANNELS; ++i)
- if (dma_ch[i].chan_status != DMA_CHANNEL_FREE)
+ if (dma_channel_active(i))
seq_printf(m, "%2d: %s\n", i, dma_ch[i].device_id);
return 0;
@@ -107,20 +106,11 @@
}
#endif
- mutex_lock(&(dma_ch[channel].dmalock));
-
- if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED)
- || (dma_ch[channel].chan_status == DMA_CHANNEL_ENABLED)) {
- mutex_unlock(&(dma_ch[channel].dmalock));
+ if (atomic_cmpxchg(&dma_ch[channel].chan_status, 0, 1)) {
pr_debug("DMA CHANNEL IN USE \n");
return -EBUSY;
- } else {
- dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED;
- pr_debug("DMA CHANNEL IS ALLOCATED \n");
}
- mutex_unlock(&(dma_ch[channel].dmalock));
-
#ifdef CONFIG_BF54x
if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
unsigned int per_map;
@@ -148,21 +138,20 @@
int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data)
{
- BUG_ON(channel >= MAX_DMA_CHANNELS ||
- dma_ch[channel].chan_status == DMA_CHANNEL_FREE);
+ int ret;
+ unsigned int irq;
- if (callback != NULL) {
- int ret;
- unsigned int irq = channel2irq(channel);
+ BUG_ON(channel >= MAX_DMA_CHANNELS || !callback ||
+ !atomic_read(&dma_ch[channel].chan_status));
- ret = request_irq(irq, callback, IRQF_DISABLED,
- dma_ch[channel].device_id, data);
- if (ret)
- return ret;
+ irq = channel2irq(channel);
+ ret = request_irq(irq, callback, 0, dma_ch[channel].device_id, data);
+ if (ret)
+ return ret;
- dma_ch[channel].irq = irq;
- dma_ch[channel].data = data;
- }
+ dma_ch[channel].irq = irq;
+ dma_ch[channel].data = data;
+
return 0;
}
EXPORT_SYMBOL(set_dma_callback);
@@ -184,7 +173,7 @@
{
pr_debug("freedma() : BEGIN \n");
BUG_ON(channel >= MAX_DMA_CHANNELS ||
- dma_ch[channel].chan_status == DMA_CHANNEL_FREE);
+ !atomic_read(&dma_ch[channel].chan_status));
/* Halt the DMA */
disable_dma(channel);
@@ -194,9 +183,7 @@
free_irq(dma_ch[channel].irq, dma_ch[channel].data);
/* Clear the DMA Variable in the Channel */
- mutex_lock(&(dma_ch[channel].dmalock));
- dma_ch[channel].chan_status = DMA_CHANNEL_FREE;
- mutex_unlock(&(dma_ch[channel].dmalock));
+ atomic_set(&dma_ch[channel].chan_status, 0);
pr_debug("freedma() : END \n");
}
@@ -210,13 +197,14 @@
{
int i;
- for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) {
- if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) {
+ for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
+ if (dma_ch[i].regs->cfg & DMAEN) {
printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
return -EBUSY;
}
- dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
+ if (i < MAX_DMA_SUSPEND_CHANNELS)
+ dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
}
return 0;
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 22705ee..a174596 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -100,6 +100,12 @@
};
# endif
+#elif defined(BF538_FAMILY)
+static unsigned short * const port_fer[] = {
+ (unsigned short *) PORTCIO_FER,
+ (unsigned short *) PORTDIO_FER,
+ (unsigned short *) PORTEIO_FER,
+};
#endif
static unsigned short reserved_gpio_map[GPIO_BANK_NUM];
@@ -163,6 +169,27 @@
static void port_setup(unsigned gpio, unsigned short usage)
{
+#if defined(BF538_FAMILY)
+ /*
+ * BF538/9 Port C,D and E are special.
+ * Inverted PORT_FER polarity on CDE and no PORF_FER on F
+ * Regular PORT F GPIOs are handled here, CDE are exclusively
+ * managed by GPIOLIB
+ */
+
+ if (gpio < MAX_BLACKFIN_GPIOS || gpio >= MAX_RESOURCES)
+ return;
+
+ gpio -= MAX_BLACKFIN_GPIOS;
+
+ if (usage == GPIO_USAGE)
+ *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
+ else
+ *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ SSYNC();
+ return;
+#endif
+
if (check_gpio(gpio))
return;
@@ -762,6 +789,8 @@
if (!(per & P_DEFINED))
return -ENODEV;
+ BUG_ON(ident >= MAX_RESOURCES);
+
local_irq_save_hw(flags);
/* If a pin can be muxed as either GPIO or peripheral, make
@@ -979,6 +1008,76 @@
}
EXPORT_SYMBOL(bfin_gpio_free);
+#ifdef BFIN_SPECIAL_GPIO_BANKS
+static unsigned short reserved_special_gpio_map[gpio_bank(MAX_RESOURCES)];
+
+int bfin_special_gpio_request(unsigned gpio, const char *label)
+{
+ unsigned long flags;
+
+ local_irq_save_hw(flags);
+
+ /*
+ * Allow that the identical GPIO can
+ * be requested from the same driver twice
+ * Do nothing and return -
+ */
+
+ if (cmp_label(gpio, label) == 0) {
+ local_irq_restore_hw(flags);
+ return 0;
+ }
+
+ if (unlikely(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ local_irq_restore_hw(flags);
+ printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n",
+ gpio, get_label(gpio));
+
+ return -EBUSY;
+ }
+ if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ local_irq_restore_hw(flags);
+ printk(KERN_ERR
+ "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n",
+ gpio, get_label(gpio));
+
+ return -EBUSY;
+ }
+
+ reserved_special_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+ reserved_peri_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+
+ set_label(gpio, label);
+ local_irq_restore_hw(flags);
+ port_setup(gpio, GPIO_USAGE);
+
+ return 0;
+}
+EXPORT_SYMBOL(bfin_special_gpio_request);
+
+void bfin_special_gpio_free(unsigned gpio)
+{
+ unsigned long flags;
+
+ might_sleep();
+
+ local_irq_save_hw(flags);
+
+ if (unlikely(!(reserved_special_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+ gpio_error(gpio);
+ local_irq_restore_hw(flags);
+ return;
+ }
+
+ reserved_special_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ reserved_peri_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+ set_label(gpio, "free");
+ local_irq_restore_hw(flags);
+}
+EXPORT_SYMBOL(bfin_special_gpio_free);
+#endif
+
+
int bfin_gpio_irq_request(unsigned gpio, const char *label)
{
unsigned long flags;
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index b52c1f8..8d42b9e 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -92,6 +92,6 @@
icplb_tbl[cpu][i_i++].data = 0;
}
-void generate_cplb_tables_all(void)
+void __init generate_cplb_tables_all(void)
{
}
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 69e0e53..930c01c 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -113,11 +113,11 @@
addr = L2_START;
d_data = L2_DMEMORY;
} else if (addr >= physical_mem_end) {
- if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE
- && (status & FAULT_USERSUPV)) {
- addr &= ~0x3fffff;
+ if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
+ addr &= ~(4 * 1024 * 1024 - 1);
d_data &= ~PAGE_SIZE_4KB;
d_data |= PAGE_SIZE_4MB;
+ d_data |= CPLB_USER_RD | CPLB_USER_WR;
} else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
&& (status & (FAULT_RW | FAULT_USERSUPV)) == FAULT_USERSUPV) {
addr &= ~(1 * 1024 * 1024 - 1);
@@ -203,7 +203,12 @@
addr = L2_START;
i_data = L2_IMEMORY;
} else if (addr >= physical_mem_end) {
- if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
+ if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
+ addr &= ~(4 * 1024 * 1024 - 1);
+ i_data &= ~PAGE_SIZE_4KB;
+ i_data |= PAGE_SIZE_4MB;
+ i_data |= CPLB_USER_RD;
+ } else if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
&& (status & FAULT_USERSUPV)) {
addr &= ~(1 * 1024 * 1024 - 1);
i_data &= ~PAGE_SIZE_4KB;
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index fd9a2f3..282a791 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -89,15 +89,25 @@
void __init generate_cplb_tables_all(void)
{
+ unsigned long uncached_end;
int i_d, i_i;
i_d = 0;
/* Normal RAM, including MTD FS. */
#ifdef CONFIG_MTD_UCLINUX
- dcplb_bounds[i_d].eaddr = memory_mtd_start + mtd_size;
+ uncached_end = memory_mtd_start + mtd_size;
#else
- dcplb_bounds[i_d].eaddr = memory_end;
+ uncached_end = memory_end;
#endif
+ /*
+ * if DMA uncached is less than 1MB, mark the 1MB chunk as uncached
+ * so that we don't have to use 4kB pages and cause CPLB thrashing
+ */
+ if ((DMA_UNCACHED_REGION >= 1 * 1024 * 1024) || !DMA_UNCACHED_REGION ||
+ ((_ramend - uncached_end) >= 1 * 1024 * 1024))
+ dcplb_bounds[i_d].eaddr = uncached_end;
+ else
+ dcplb_bounds[i_d].eaddr = uncached_end & ~(1 * 1024 * 1024);
dcplb_bounds[i_d++].data = SDRAM_DGENERIC;
/* DMA uncached region. */
if (DMA_UNCACHED_REGION) {
@@ -135,18 +145,15 @@
i_i = 0;
/* Normal RAM, including MTD FS. */
-#ifdef CONFIG_MTD_UCLINUX
- icplb_bounds[i_i].eaddr = memory_mtd_start + mtd_size;
-#else
- icplb_bounds[i_i].eaddr = memory_end;
-#endif
+ icplb_bounds[i_i].eaddr = uncached_end;
icplb_bounds[i_i++].data = SDRAM_IGENERIC;
- /* DMA uncached region. */
- if (DMA_UNCACHED_REGION) {
- icplb_bounds[i_i].eaddr = _ramend;
- icplb_bounds[i_i++].data = 0;
- }
if (_ramend != physical_mem_end) {
+ /* DMA uncached region. */
+ if (DMA_UNCACHED_REGION) {
+ /* Normally this hole is caught by the async below. */
+ icplb_bounds[i_i].eaddr = _ramend;
+ icplb_bounds[i_i++].data = 0;
+ }
/* Reserved memory. */
icplb_bounds[i_i].eaddr = physical_mem_end;
icplb_bounds[i_i++].data = (reserved_mem_icache_on ?
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index e74e74d..e937f32 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -7,30 +7,25 @@
*/
#include <linux/types.h>
-#include <linux/mm.h>
+#include <linux/gfp.h>
#include <linux/string.h>
-#include <linux/bootmem.h>
#include <linux/spinlock.h>
-#include <linux/device.h>
#include <linux/dma-mapping.h>
-#include <linux/io.h>
#include <linux/scatterlist.h>
-#include <asm/cacheflush.h>
-#include <asm/bfin-global.h>
static spinlock_t dma_page_lock;
-static unsigned int *dma_page;
+static unsigned long *dma_page;
static unsigned int dma_pages;
static unsigned long dma_base;
static unsigned long dma_size;
static unsigned int dma_initialized;
-void dma_alloc_init(unsigned long start, unsigned long end)
+static void dma_alloc_init(unsigned long start, unsigned long end)
{
spin_lock_init(&dma_page_lock);
dma_initialized = 0;
- dma_page = (unsigned int *)__get_free_page(GFP_KERNEL);
+ dma_page = (unsigned long *)__get_free_page(GFP_KERNEL);
memset(dma_page, 0, PAGE_SIZE);
dma_base = PAGE_ALIGN(start);
dma_size = PAGE_ALIGN(end) - PAGE_ALIGN(start);
@@ -58,10 +53,11 @@
spin_lock_irqsave(&dma_page_lock, flags);
for (i = 0; i < dma_pages;) {
- if (dma_page[i++] == 0) {
+ if (test_bit(i++, dma_page) == 0) {
if (++count == pages) {
while (count--)
- dma_page[--i] = 1;
+ __set_bit(--i, dma_page);
+
ret = dma_base + (i << PAGE_SHIFT);
break;
}
@@ -84,14 +80,14 @@
}
spin_lock_irqsave(&dma_page_lock, flags);
- for (i = page; i < page + pages; i++) {
- dma_page[i] = 0;
- }
+ for (i = page; i < page + pages; i++)
+ __clear_bit(i, dma_page);
+
spin_unlock_irqrestore(&dma_page_lock, flags);
}
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, gfp_t gfp)
+ dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret;
@@ -115,21 +111,14 @@
EXPORT_SYMBOL(dma_free_coherent);
/*
- * Dummy functions defined for some existing drivers
+ * Streaming DMA mappings
*/
-
-dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
- enum dma_data_direction direction)
+void __dma_sync(dma_addr_t addr, size_t size,
+ enum dma_data_direction dir)
{
- BUG_ON(direction == DMA_NONE);
-
- invalidate_dcache_range((unsigned long)ptr,
- (unsigned long)ptr + size);
-
- return (dma_addr_t) ptr;
+ _dma_sync(addr, size, dir);
}
-EXPORT_SYMBOL(dma_map_single);
+EXPORT_SYMBOL(__dma_sync);
int
dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
@@ -137,30 +126,23 @@
{
int i;
- BUG_ON(direction == DMA_NONE);
-
for (i = 0; i < nents; i++, sg++) {
sg->dma_address = (dma_addr_t) sg_virt(sg);
-
- invalidate_dcache_range(sg_dma_address(sg),
- sg_dma_address(sg) +
- sg_dma_len(sg));
+ __dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction);
}
return nents;
}
EXPORT_SYMBOL(dma_map_sg);
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction direction)
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction)
{
- BUG_ON(direction == DMA_NONE);
-}
-EXPORT_SYMBOL(dma_unmap_single);
+ int i;
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nhwentries, enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
+ for (i = 0; i < nelems; i++, sg++) {
+ sg->dma_address = (dma_addr_t) sg_virt(sg);
+ __dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction);
+ }
}
-EXPORT_SYMBOL(dma_unmap_sg);
+EXPORT_SYMBOL(dma_sync_sg_for_device);
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index 7281a91..cdbe075 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -137,7 +137,7 @@
#endif
};
-void set_gptimer_pwidth(int timer_id, uint32_t value)
+void set_gptimer_pwidth(unsigned int timer_id, uint32_t value)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
timer_regs[timer_id]->width = value;
@@ -145,14 +145,14 @@
}
EXPORT_SYMBOL(set_gptimer_pwidth);
-uint32_t get_gptimer_pwidth(int timer_id)
+uint32_t get_gptimer_pwidth(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
return timer_regs[timer_id]->width;
}
EXPORT_SYMBOL(get_gptimer_pwidth);
-void set_gptimer_period(int timer_id, uint32_t period)
+void set_gptimer_period(unsigned int timer_id, uint32_t period)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
timer_regs[timer_id]->period = period;
@@ -160,28 +160,28 @@
}
EXPORT_SYMBOL(set_gptimer_period);
-uint32_t get_gptimer_period(int timer_id)
+uint32_t get_gptimer_period(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
return timer_regs[timer_id]->period;
}
EXPORT_SYMBOL(get_gptimer_period);
-uint32_t get_gptimer_count(int timer_id)
+uint32_t get_gptimer_count(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
return timer_regs[timer_id]->counter;
}
EXPORT_SYMBOL(get_gptimer_count);
-uint32_t get_gptimer_status(int group)
+uint32_t get_gptimer_status(unsigned int group)
{
tassert(group < BFIN_TIMER_NUM_GROUP);
return group_regs[group]->status;
}
EXPORT_SYMBOL(get_gptimer_status);
-void set_gptimer_status(int group, uint32_t value)
+void set_gptimer_status(unsigned int group, uint32_t value)
{
tassert(group < BFIN_TIMER_NUM_GROUP);
group_regs[group]->status = value;
@@ -189,42 +189,42 @@
}
EXPORT_SYMBOL(set_gptimer_status);
-int get_gptimer_intr(int timer_id)
+int get_gptimer_intr(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & timil_mask[timer_id]);
}
EXPORT_SYMBOL(get_gptimer_intr);
-void clear_gptimer_intr(int timer_id)
+void clear_gptimer_intr(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
group_regs[BFIN_TIMER_OCTET(timer_id)]->status = timil_mask[timer_id];
}
EXPORT_SYMBOL(clear_gptimer_intr);
-int get_gptimer_over(int timer_id)
+int get_gptimer_over(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & tovf_mask[timer_id]);
}
EXPORT_SYMBOL(get_gptimer_over);
-void clear_gptimer_over(int timer_id)
+void clear_gptimer_over(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
group_regs[BFIN_TIMER_OCTET(timer_id)]->status = tovf_mask[timer_id];
}
EXPORT_SYMBOL(clear_gptimer_over);
-int get_gptimer_run(int timer_id)
+int get_gptimer_run(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
return !!(group_regs[BFIN_TIMER_OCTET(timer_id)]->status & trun_mask[timer_id]);
}
EXPORT_SYMBOL(get_gptimer_run);
-void set_gptimer_config(int timer_id, uint16_t config)
+void set_gptimer_config(unsigned int timer_id, uint16_t config)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
timer_regs[timer_id]->config = config;
@@ -232,7 +232,7 @@
}
EXPORT_SYMBOL(set_gptimer_config);
-uint16_t get_gptimer_config(int timer_id)
+uint16_t get_gptimer_config(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
return timer_regs[timer_id]->config;
@@ -280,7 +280,7 @@
}
EXPORT_SYMBOL(disable_gptimers_sync);
-void set_gptimer_pulse_hi(int timer_id)
+void set_gptimer_pulse_hi(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
timer_regs[timer_id]->config |= TIMER_PULSE_HI;
@@ -288,7 +288,7 @@
}
EXPORT_SYMBOL(set_gptimer_pulse_hi);
-void clear_gptimer_pulse_hi(int timer_id)
+void clear_gptimer_pulse_hi(unsigned int timer_id)
{
tassert(timer_id < MAX_BLACKFIN_GPTIMERS);
timer_regs[timer_id]->config &= ~TIMER_PULSE_HI;
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index 5d73823..a77307a 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -335,3 +335,70 @@
__clear_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
bfin_sti(bfin_irq_flags);
}
+
+/*
+ * We could use standard atomic bitops in the following root status
+ * manipulation routines, but let's prepare for SMP support in the
+ * same move, preventing CPU migration as required.
+ */
+void __ipipe_stall_root(void)
+{
+ unsigned long *p, flags;
+
+ local_irq_save_hw(flags);
+ p = &__ipipe_root_status;
+ __set_bit(IPIPE_STALL_FLAG, p);
+ local_irq_restore_hw(flags);
+}
+EXPORT_SYMBOL(__ipipe_stall_root);
+
+unsigned long __ipipe_test_and_stall_root(void)
+{
+ unsigned long *p, flags;
+ int x;
+
+ local_irq_save_hw(flags);
+ p = &__ipipe_root_status;
+ x = __test_and_set_bit(IPIPE_STALL_FLAG, p);
+ local_irq_restore_hw(flags);
+
+ return x;
+}
+EXPORT_SYMBOL(__ipipe_test_and_stall_root);
+
+unsigned long __ipipe_test_root(void)
+{
+ const unsigned long *p;
+ unsigned long flags;
+ int x;
+
+ local_irq_save_hw_smp(flags);
+ p = &__ipipe_root_status;
+ x = test_bit(IPIPE_STALL_FLAG, p);
+ local_irq_restore_hw_smp(flags);
+
+ return x;
+}
+EXPORT_SYMBOL(__ipipe_test_root);
+
+void __ipipe_lock_root(void)
+{
+ unsigned long *p, flags;
+
+ local_irq_save_hw(flags);
+ p = &__ipipe_root_status;
+ __set_bit(IPIPE_SYNCDEFER_FLAG, p);
+ local_irq_restore_hw(flags);
+}
+EXPORT_SYMBOL(__ipipe_lock_root);
+
+void __ipipe_unlock_root(void)
+{
+ unsigned long *p, flags;
+
+ local_irq_save_hw(flags);
+ p = &__ipipe_root_status;
+ __clear_bit(IPIPE_SYNCDEFER_FLAG, p);
+ local_irq_restore_hw(flags);
+}
+EXPORT_SYMBOL(__ipipe_unlock_root);
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index cce79d0..f1036b6 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -24,16 +24,6 @@
#include <asm/blackfin.h>
#include <asm/dma.h>
-/* Put the error code here just in case the user cares. */
-int gdb_bfin_errcode;
-/* Likewise, the vector number here (since GDB only gets the signal
- number through the usual means, and that's not very specific). */
-int gdb_bfin_vector = -1;
-
-#if KGDB_MAX_NO_CPUS != 8
-#error change the definition of slavecpulocks
-#endif
-
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
gdb_regs[BFIN_R0] = regs->r0;
@@ -369,13 +359,6 @@
}
#endif
-void kgdb_post_primary_code(struct pt_regs *regs, int eVector, int err_code)
-{
- /* Master processor is completely in the debugger */
- gdb_bfin_vector = eVector;
- gdb_bfin_errcode = err_code;
-}
-
int kgdb_arch_handle_exception(int vector, int signo,
int err_code, char *remcom_in_buffer,
char *remcom_out_buffer,
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
index 59fc42d..9a4b075 100644
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@@ -17,8 +17,9 @@
#include <asm/blackfin.h>
+/* Symbols are here for kgdb test to poke directly */
static char cmdline[256];
-static unsigned long len;
+static size_t len;
#ifndef CONFIG_SMP
static int num1 __attribute__((l1_data));
@@ -27,11 +28,10 @@
void kgdb_l1_test(void)
{
- printk(KERN_ALERT "L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
- printk(KERN_ALERT "L1 : code function addr = 0x%p\n", kgdb_l1_test);
- num1 = num1 + 10 ;
- printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
- return ;
+ pr_alert("L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
+ pr_alert("L1 : code function addr = 0x%p\n", kgdb_l1_test);
+ num1 = num1 + 10;
+ pr_alert("L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
}
#endif
@@ -42,11 +42,10 @@
void kgdb_l2_test(void)
{
- printk(KERN_ALERT "L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
- printk(KERN_ALERT "L2 : code function addr = 0x%p\n", kgdb_l2_test);
- num2 = num2 + 20 ;
- printk(KERN_ALERT "L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
- return ;
+ pr_alert("L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
+ pr_alert("L2 : code function addr = 0x%p\n", kgdb_l2_test);
+ num2 = num2 + 20;
+ pr_alert("L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2);
}
#endif
@@ -54,12 +53,14 @@
int kgdb_test(char *name, int len, int count, int z)
{
- printk(KERN_ALERT "kgdb name(%d): %s, %d, %d\n", len, name, count, z);
+ pr_alert("kgdb name(%d): %s, %d, %d\n", len, name, count, z);
count = z;
return count;
}
-static int test_proc_output(char *buf)
+static ssize_t
+kgdb_test_proc_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
{
kgdb_test("hello world!", 12, 0x55, 0x10);
#ifndef CONFIG_SMP
@@ -72,49 +73,31 @@
return 0;
}
-static int test_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static ssize_t
+kgdb_test_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *pos)
{
- int len;
-
- len = test_proc_output(page);
- if (len <= off+count)
- *eof = 1;
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
- return len;
-}
-
-static int test_write_proc(struct file *file, const char *buffer,
- unsigned long count, void *data)
-{
- if (count >= 256)
- len = 255;
- else
- len = count;
-
+ len = min_t(size_t, 255, count);
memcpy(cmdline, buffer, count);
cmdline[len] = 0;
return len;
}
+static const struct file_operations kgdb_test_proc_fops = {
+ .owner = THIS_MODULE,
+ .read = kgdb_test_proc_read,
+ .write = kgdb_test_proc_write,
+};
+
static int __init kgdbtest_init(void)
{
struct proc_dir_entry *entry;
- entry = create_proc_entry("kgdbtest", 0, NULL);
+ entry = proc_create("kgdbtest", 0, NULL, &kgdb_test_proc_fops);
if (entry == NULL)
return -ENOMEM;
- entry->read_proc = test_read_proc;
- entry->write_proc = test_write_proc;
- entry->data = NULL;
-
return 0;
}
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 4587642..b56b0e4 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -258,9 +258,12 @@
int __user *up0 = (int __user *)regs->p0;
switch (regs->pc) {
+ default:
+ /* not in middle of an atomic step, so resume like normal */
+ return;
+
case ATOMIC_XCHG32 + 2:
put_user(regs->r1, up0);
- regs->pc = ATOMIC_XCHG32 + 4;
break;
case ATOMIC_CAS32 + 2:
@@ -268,7 +271,6 @@
if (regs->r0 == regs->r1)
case ATOMIC_CAS32 + 6:
put_user(regs->r2, up0);
- regs->pc = ATOMIC_CAS32 + 8;
break;
case ATOMIC_ADD32 + 2:
@@ -276,7 +278,6 @@
/* fall through */
case ATOMIC_ADD32 + 4:
put_user(regs->r0, up0);
- regs->pc = ATOMIC_ADD32 + 6;
break;
case ATOMIC_SUB32 + 2:
@@ -284,7 +285,6 @@
/* fall through */
case ATOMIC_SUB32 + 4:
put_user(regs->r0, up0);
- regs->pc = ATOMIC_SUB32 + 6;
break;
case ATOMIC_IOR32 + 2:
@@ -292,7 +292,6 @@
/* fall through */
case ATOMIC_IOR32 + 4:
put_user(regs->r0, up0);
- regs->pc = ATOMIC_IOR32 + 6;
break;
case ATOMIC_AND32 + 2:
@@ -300,7 +299,6 @@
/* fall through */
case ATOMIC_AND32 + 4:
put_user(regs->r0, up0);
- regs->pc = ATOMIC_AND32 + 6;
break;
case ATOMIC_XOR32 + 2:
@@ -308,9 +306,15 @@
/* fall through */
case ATOMIC_XOR32 + 4:
put_user(regs->r0, up0);
- regs->pc = ATOMIC_XOR32 + 6;
break;
}
+
+ /*
+ * We've finished the atomic section, and the only thing left for
+ * userspace is to do a RTS, so we might as well handle that too
+ * since we need to update the PC anyways.
+ */
+ regs->pc = regs->rets;
}
static inline
@@ -332,12 +336,58 @@
{
return in_mem_const_off(addr, size, 0, const_addr, const_size);
}
-#define IN_ASYNC(bnum, bctlnum) \
+#define ASYNC_ENABLED(bnum, bctlnum) \
({ \
- (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? -EFAULT : \
- bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? -EFAULT : \
- BFIN_MEM_ACCESS_CORE; \
+ (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? 0 : \
+ bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? 0 : \
+ 1; \
})
+/*
+ * We can't read EBIU banks that aren't enabled or we end up hanging
+ * on the access to the async space. Make sure we validate accesses
+ * that cross async banks too.
+ * 0 - found, but unusable
+ * 1 - found & usable
+ * 2 - not found
+ */
+static
+int in_async(unsigned long addr, unsigned long size)
+{
+ if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE) {
+ if (!ASYNC_ENABLED(0, 0))
+ return 0;
+ if (addr + size <= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)
+ return 1;
+ size -= ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE - addr;
+ addr = ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE;
+ }
+ if (addr >= ASYNC_BANK1_BASE && addr < ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE) {
+ if (!ASYNC_ENABLED(1, 0))
+ return 0;
+ if (addr + size <= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)
+ return 1;
+ size -= ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE - addr;
+ addr = ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE;
+ }
+ if (addr >= ASYNC_BANK2_BASE && addr < ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE) {
+ if (!ASYNC_ENABLED(2, 1))
+ return 0;
+ if (addr + size <= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE)
+ return 1;
+ size -= ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE - addr;
+ addr = ASYNC_BANK2_BASE + ASYNC_BANK2_SIZE;
+ }
+ if (addr >= ASYNC_BANK3_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) {
+ if (ASYNC_ENABLED(3, 1))
+ return 0;
+ if (addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE)
+ return 1;
+ return 0;
+ }
+
+ /* not within async bounds */
+ return 2;
+}
int bfin_mem_access_type(unsigned long addr, unsigned long size)
{
@@ -374,17 +424,11 @@
if (addr >= SYSMMR_BASE)
return BFIN_MEM_ACCESS_CORE_ONLY;
- /* We can't read EBIU banks that aren't enabled or we end up hanging
- * on the access to the async space.
- */
- if (in_mem_const(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK0_SIZE))
- return IN_ASYNC(0, 0);
- if (in_mem_const(addr, size, ASYNC_BANK1_BASE, ASYNC_BANK1_SIZE))
- return IN_ASYNC(1, 0);
- if (in_mem_const(addr, size, ASYNC_BANK2_BASE, ASYNC_BANK2_SIZE))
- return IN_ASYNC(2, 1);
- if (in_mem_const(addr, size, ASYNC_BANK3_BASE, ASYNC_BANK3_SIZE))
- return IN_ASYNC(3, 1);
+ switch (in_async(addr, size)) {
+ case 0: return -EFAULT;
+ case 1: return BFIN_MEM_ACCESS_CORE;
+ case 2: /* fall through */;
+ }
if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
return BFIN_MEM_ACCESS_CORE;
@@ -401,6 +445,8 @@
/* Return 1 if access to memory range is OK, 0 otherwise */
int _access_ok(unsigned long addr, unsigned long size)
{
+ int aret;
+
if (size == 0)
return 1;
/* Check that things do not wrap around */
@@ -450,6 +496,11 @@
if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
return 1;
#endif
+
+ aret = in_async(addr, size);
+ if (aret < 2)
+ return aret;
+
if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
return 1;
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 56b0ba1..65567dc 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -316,19 +316,6 @@
case BFIN_MEM_ACCESS_CORE_ONLY:
copied = access_process_vm(child, addr, &data,
to_copy, 1);
- if (copied)
- break;
-
- /* hrm, why didn't that work ... maybe no mapping */
- if (addr >= FIXED_CODE_START &&
- addr + to_copy <= FIXED_CODE_END) {
- copy_to_user_page(0, 0, 0, paddr, &data, to_copy);
- copied = to_copy;
- } else if (addr >= BOOT_ROM_START) {
- memcpy(paddr, &data, to_copy);
- copied = to_copy;
- }
-
break;
case BFIN_MEM_ACCESS_DMA:
if (safe_dma_memcpy(paddr, &data, to_copy))
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index c202a44..95448ae 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -178,10 +178,10 @@
void __init bfin_relocate_l1_mem(void)
{
- unsigned long l1_code_length;
- unsigned long l1_data_a_length;
- unsigned long l1_data_b_length;
- unsigned long l2_length;
+ unsigned long text_l1_len = (unsigned long)_text_l1_len;
+ unsigned long data_l1_len = (unsigned long)_data_l1_len;
+ unsigned long data_b_l1_len = (unsigned long)_data_b_l1_len;
+ unsigned long l2_len = (unsigned long)_l2_len;
early_shadow_stamp();
@@ -201,30 +201,23 @@
blackfin_dma_early_init();
- /* if necessary, copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
- l1_code_length = _etext_l1 - _stext_l1;
- if (l1_code_length)
- early_dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
+ /* if necessary, copy L1 text to L1 instruction SRAM */
+ if (L1_CODE_LENGTH && text_l1_len)
+ early_dma_memcpy(_stext_l1, _text_l1_lma, text_l1_len);
- /* if necessary, copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
- l1_data_a_length = _sbss_l1 - _sdata_l1;
- if (l1_data_a_length)
- early_dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
+ /* if necessary, copy L1 data to L1 data bank A SRAM */
+ if (L1_DATA_A_LENGTH && data_l1_len)
+ early_dma_memcpy(_sdata_l1, _data_l1_lma, data_l1_len);
- /* if necessary, copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
- l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
- if (l1_data_b_length)
- early_dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
- l1_data_a_length, l1_data_b_length);
+ /* if necessary, copy L1 data B to L1 data bank B SRAM */
+ if (L1_DATA_B_LENGTH && data_b_l1_len)
+ early_dma_memcpy(_sdata_b_l1, _data_b_l1_lma, data_b_l1_len);
early_dma_memcpy_done();
- /* if necessary, copy _stext_l2 to _edata_l2 to L2 SRAM */
- if (L2_LENGTH != 0) {
- l2_length = _sbss_l2 - _stext_l2;
- if (l2_length)
- memcpy(_stext_l2, _l2_lma_start, l2_length);
- }
+ /* if necessary, copy L2 text/data to L2 SRAM */
+ if (L2_LENGTH && l2_len)
+ memcpy(_stext_l2, _l2_lma, l2_len);
}
/* add_memory_region to memmap */
@@ -608,11 +601,6 @@
page_mask_order = get_order(3 * page_mask_nelts * sizeof(long));
#endif
-#if !defined(CONFIG_MTD_UCLINUX)
- /*In case there is no valid CPLB behind memory_end make sure we don't get to close*/
- memory_end -= SIZE_4K;
-#endif
-
init_mm.start_code = (unsigned long)_stext;
init_mm.end_code = (unsigned long)_etext;
init_mm.end_data = (unsigned long)_edata;
@@ -917,7 +905,7 @@
printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
if (bfin_compiled_revid() == 0xffff)
- printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
+ printk(KERN_INFO "Compiled for ADSP-%s Rev any, running on 0.%d\n", CPU, bfin_revid());
else if (bfin_compiled_revid() == -1)
printk(KERN_INFO "Compiled for ADSP-%s Rev none\n", CPU);
else
diff --git a/arch/blackfin/kernel/signal.c b/arch/blackfin/kernel/signal.c
index 9d90c18..e0fd63e 100644
--- a/arch/blackfin/kernel/signal.c
+++ b/arch/blackfin/kernel/signal.c
@@ -12,6 +12,7 @@
#include <linux/binfmts.h>
#include <linux/freezer.h>
#include <linux/uaccess.h>
+#include <linux/tracehook.h>
#include <asm/cacheflush.h>
#include <asm/ucontext.h>
@@ -332,3 +333,20 @@
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
+
+/*
+ * notification of userspace execution resumption
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs)
+{
+ if (test_thread_flag(TIF_SIGPENDING) || test_thread_flag(TIF_RESTORE_SIGMASK))
+ do_signal(regs);
+
+ if (test_thread_flag(TIF_NOTIFY_RESUME)) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ if (current->replacement_session_keyring)
+ key_replace_session_keyring();
+ }
+}
+
diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
index 359cfb1..17c38c5 100644
--- a/arch/blackfin/kernel/time-ts.c
+++ b/arch/blackfin/kernel/time-ts.c
@@ -22,8 +22,6 @@
#include <asm/time.h>
#include <asm/gptimers.h>
-#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-
/* Accelerators for sched_clock()
* convert from cycles(64bits) => nanoseconds (64bits)
* basic equation:
@@ -46,20 +44,11 @@
* -johnstul@us.ibm.com "math is hard, lets go shopping!"
*/
-static unsigned long cyc2ns_scale;
#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-static inline void set_cyc2ns_scale(unsigned long cpu_khz)
-{
- cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR) / cpu_khz;
-}
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
-static inline unsigned long long cycles_2_ns(cycle_t cyc)
-{
- return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
-}
-
-static cycle_t bfin_read_cycles(struct clocksource *cs)
+static notrace cycle_t bfin_read_cycles(struct clocksource *cs)
{
return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
}
@@ -69,19 +58,18 @@
.rating = 400,
.read = bfin_read_cycles,
.mask = CLOCKSOURCE_MASK(64),
- .shift = 22,
+ .shift = CYC2NS_SCALE_FACTOR,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-unsigned long long sched_clock(void)
+static inline unsigned long long bfin_cs_cycles_sched_clock(void)
{
- return cycles_2_ns(bfin_read_cycles(&bfin_cs_cycles));
+ return clocksource_cyc2ns(bfin_read_cycles(&bfin_cs_cycles),
+ bfin_cs_cycles.mult, bfin_cs_cycles.shift);
}
static int __init bfin_cs_cycles_init(void)
{
- set_cyc2ns_scale(get_cclk() / 1000);
-
bfin_cs_cycles.mult = \
clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift);
@@ -108,7 +96,7 @@
enable_gptimers(TIMER0bit);
}
-static cycle_t bfin_read_gptimer0(void)
+static cycle_t bfin_read_gptimer0(struct clocksource *cs)
{
return bfin_read_TIMER0_COUNTER();
}
@@ -118,10 +106,16 @@
.rating = 350,
.read = bfin_read_gptimer0,
.mask = CLOCKSOURCE_MASK(32),
- .shift = 22,
+ .shift = CYC2NS_SCALE_FACTOR,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+static inline unsigned long long bfin_cs_gptimer0_sched_clock(void)
+{
+ return clocksource_cyc2ns(bfin_read_TIMER0_COUNTER(),
+ bfin_cs_gptimer0.mult, bfin_cs_gptimer0.shift);
+}
+
static int __init bfin_cs_gptimer0_init(void)
{
setup_gptimer0();
@@ -138,6 +132,19 @@
# define bfin_cs_gptimer0_init()
#endif
+
+#if defined(CONFIG_GPTMR0_CLOCKSOURCE) || defined(CONFIG_CYCLES_CLOCKSOURCE)
+/* prefer to use cycles since it has higher rating */
+notrace unsigned long long sched_clock(void)
+{
+#if defined(CONFIG_CYCLES_CLOCKSOURCE)
+ return bfin_cs_cycles_sched_clock();
+#else
+ return bfin_cs_gptimer0_sched_clock();
+#endif
+}
+#endif
+
#ifdef CONFIG_CORE_TIMER_IRQ_L1
__attribute__((l1_text))
#endif
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index bd3b53d..13c1ee3 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -184,11 +184,3 @@
time_sched_init(timer_interrupt);
}
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
- return (unsigned long long)jiffies *(NSEC_PER_SEC / HZ);
-}
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 9636bac..d3cbcd6 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -119,6 +119,15 @@
return;
}
+ /*
+ * Don't walk any of the vmas if we are oopsing, it has been known
+ * to cause problems - corrupt vmas (kernel crashes) cause double faults
+ */
+ if (oops_in_progress) {
+ strcat(buf, "/* kernel dynamic memory (maybe user-space) */");
+ return;
+ }
+
/* looks like we're off in user-land, so let's walk all the
* mappings of all our processes and see if we can't be a whee
* bit more specific
@@ -515,6 +524,36 @@
break;
/* External Memory Addressing Error */
case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR):
+ if (ANOMALY_05000310) {
+ static unsigned long anomaly_rets;
+
+ if ((fp->pc >= (L1_CODE_START + L1_CODE_LENGTH - 512)) &&
+ (fp->pc < (L1_CODE_START + L1_CODE_LENGTH))) {
+ /*
+ * A false hardware error will happen while fetching at
+ * the L1 instruction SRAM boundary. Ignore it.
+ */
+ anomaly_rets = fp->rets;
+ goto traps_done;
+ } else if (fp->rets == anomaly_rets) {
+ /*
+ * While boundary code returns to a function, at the ret
+ * point, a new false hardware error might occur too based
+ * on tests. Ignore it too.
+ */
+ goto traps_done;
+ } else if ((fp->rets >= (L1_CODE_START + L1_CODE_LENGTH - 512)) &&
+ (fp->rets < (L1_CODE_START + L1_CODE_LENGTH))) {
+ /*
+ * If boundary code calls a function, at the entry point,
+ * a new false hardware error maybe happen based on tests.
+ * Ignore it too.
+ */
+ goto traps_done;
+ } else
+ anomaly_rets = 0;
+ }
+
info.si_code = BUS_ADRERR;
sig = SIGBUS;
strerror = KERN_NOTICE HWC_x3(KERN_NOTICE);
@@ -976,12 +1015,12 @@
!((unsigned long)current & 0x3) && current->pid) {
verbose_printk(KERN_NOTICE "CURRENT PROCESS:\n");
if (current->comm >= (char *)FIXED_CODE_START)
- verbose_printk(KERN_NOTICE "COMM=%s PID=%d\n",
+ verbose_printk(KERN_NOTICE "COMM=%s PID=%d",
current->comm, current->pid);
else
- verbose_printk(KERN_NOTICE "COMM= invalid\n");
+ verbose_printk(KERN_NOTICE "COMM= invalid");
- printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu);
+ printk(KERN_CONT " CPU=%d\n", current_thread_info()->cpu);
if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START)
verbose_printk(KERN_NOTICE
"TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index f39707c..66799e7 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -121,8 +121,6 @@
EXIT_DATA
}
- __l1_lma_start = .;
-
.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
{
. = ALIGN(4);
@@ -134,9 +132,11 @@
. = ALIGN(4);
__etext_l1 = .;
}
- ASSERT (SIZEOF(.text_l1) <= L1_CODE_LENGTH, "L1 text overflow!")
+ __text_l1_lma = LOADADDR(.text_l1);
+ __text_l1_len = SIZEOF(.text_l1);
+ ASSERT (__text_l1_len <= L1_CODE_LENGTH, "L1 text overflow!")
- .data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1))
+ .data_l1 L1_DATA_A_START : AT(__text_l1_lma + __text_l1_len)
{
. = ALIGN(4);
__sdata_l1 = .;
@@ -152,9 +152,11 @@
. = ALIGN(4);
__ebss_l1 = .;
}
- ASSERT (SIZEOF(.data_l1) <= L1_DATA_A_LENGTH, "L1 data A overflow!")
+ __data_l1_lma = LOADADDR(.data_l1);
+ __data_l1_len = SIZEOF(.data_l1);
+ ASSERT (__data_l1_len <= L1_DATA_A_LENGTH, "L1 data A overflow!")
- .data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1))
+ .data_b_l1 L1_DATA_B_START : AT(__data_l1_lma + __data_l1_len)
{
. = ALIGN(4);
__sdata_b_l1 = .;
@@ -167,11 +169,11 @@
. = ALIGN(4);
__ebss_b_l1 = .;
}
- ASSERT (SIZEOF(.data_b_l1) <= L1_DATA_B_LENGTH, "L1 data B overflow!")
+ __data_b_l1_lma = LOADADDR(.data_b_l1);
+ __data_b_l1_len = SIZEOF(.data_b_l1);
+ ASSERT (__data_b_l1_len <= L1_DATA_B_LENGTH, "L1 data B overflow!")
- __l2_lma_start = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
-
- .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
+ .text_data_l2 L2_START : AT(__data_b_l1_lma + __data_b_l1_len)
{
. = ALIGN(4);
__stext_l2 = .;
@@ -193,12 +195,14 @@
. = ALIGN(4);
__ebss_l2 = .;
}
- ASSERT (SIZEOF(.text_data_l2) <= L2_LENGTH, "L2 overflow!")
+ __l2_lma = LOADADDR(.text_data_l2);
+ __l2_len = SIZEOF(.text_data_l2);
+ ASSERT (__l2_len <= L2_LENGTH, "L2 overflow!")
/* Force trailing alignment of our init section so that when we
* free our init memory, we don't leave behind a partial page.
*/
- . = LOADADDR(.text_data_l2) + SIZEOF(.text_data_l2);
+ . = __l2_lma + __l2_len;
. = ALIGN(PAGE_SIZE);
___init_end = .;
diff --git a/arch/blackfin/lib/Makefile b/arch/blackfin/lib/Makefile
index 635288f..42c47dc 100644
--- a/arch/blackfin/lib/Makefile
+++ b/arch/blackfin/lib/Makefile
@@ -5,7 +5,7 @@
lib-y := \
ashldi3.o ashrdi3.o lshrdi3.o \
muldi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
- checksum.o memcpy.o memset.o memcmp.o memchr.o memmove.o \
+ memcpy.o memset.o memcmp.o memchr.o memmove.o \
strcmp.o strcpy.o strncmp.o strncpy.o \
umulsi3_highpart.o smulsi3_highpart.o \
ins.o outs.o
diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c
deleted file mode 100644
index c62969d..0000000
--- a/arch/blackfin/lib/checksum.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- *
- * An implementation of the TCP/IP protocol suite for the LINUX operating
- * system. INET is implemented using the BSD Socket interface as the
- * means of communication with the user level.
- *
- */
-
-#include <linux/module.h>
-#include <net/checksum.h>
-#include <asm/checksum.h>
-
-#ifdef CONFIG_IP_CHECKSUM_L1
-static unsigned short do_csum(const unsigned char *buff, int len)__attribute__((l1_text));
-#endif
-
-static unsigned short do_csum(const unsigned char *buff, int len)
-{
- register unsigned long sum = 0;
- int swappem = 0;
-
- if (1 & (unsigned long)buff) {
- sum = *buff << 8;
- buff++;
- len--;
- ++swappem;
- }
-
- while (len > 1) {
- sum += *(unsigned short *)buff;
- buff += 2;
- len -= 2;
- }
-
- if (len > 0)
- sum += *buff;
-
- /* Fold 32-bit sum to 16 bits */
- while (sum >> 16)
- sum = (sum & 0xffff) + (sum >> 16);
-
- if (swappem)
- sum = ((sum & 0xff00) >> 8) + ((sum & 0x00ff) << 8);
-
- return sum;
-
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl)
-{
- return (__force __sum16)~do_csum(iph, ihl * 4);
-}
-EXPORT_SYMBOL(ip_fast_csum);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
- /*
- * Just in case we get nasty checksum data...
- * Like 0xffff6ec3 in the case of our IPv6 multicast header.
- * We fold to begin with, as well as at the end.
- */
- sum = (sum & 0xffff) + (sum >> 16);
-
- sum += do_csum(buff, len);
-
- sum = (sum & 0xffff) + (sum >> 16);
-
- return sum;
-}
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
- return (__force __sum16)~do_csum(buff, len);
-}
-EXPORT_SYMBOL(ip_compute_csum);
-
-/*
- * copy from fs while checksumming, otherwise like csum_partial
- */
-
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *csum_err)
-{
- if (csum_err)
- *csum_err = 0;
- memcpy(dst, (__force void *)src, len);
- return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy_from_user);
-
-/*
- * copy from ds while checksumming, otherwise like csum_partial
- */
-
-__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
-{
- memcpy(dst, src, len);
- return csum_partial(dst, len, sum);
-}
-EXPORT_SYMBOL(csum_partial_copy);
diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig
index 4c76fef..4ab2d16 100644
--- a/arch/blackfin/mach-bf518/Kconfig
+++ b/arch/blackfin/mach-bf518/Kconfig
@@ -1,3 +1,7 @@
+config BF51x
+ def_bool y
+ depends on (BF512 || BF514 || BF516 || BF518)
+
if (BF51x)
source "arch/blackfin/mach-bf518/boards/Kconfig"
diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index 6cfb246..9053462 100644
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -58,10 +58,4 @@
#define OFFSET_SCR 0x1C /* SCR Scratch Register */
#define OFFSET_GCTL 0x24 /* Global Control Register */
-/* PLL_DIV Masks */
-#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
-#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
-#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */
-#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */
-
#endif
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
index e1d9991..108fa4b 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF514.h
@@ -1,7 +1,7 @@
/*
* Copyright 2008-2009 Analog Devices Inc.
*
- * Licensed under the GPL-2 or later
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _CDEF_BF514_H
@@ -10,15 +10,8 @@
/* include all Core registers and bit definitions */
#include "defBF514.h"
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */
-
-/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "cdefBF51x_base.h"
-
-/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
+/* BF514 is BF512 + RSI */
+#include "cdefBF512.h"
/* Removable Storage Interface Registers */
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
index 6b364ed..2751592 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF516.h
@@ -1,7 +1,7 @@
/*
* Copyright 2008-2009 Analog Devices Inc.
*
- * Licensed under the GPL-2 or later
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _CDEF_BF516_H
@@ -10,15 +10,8 @@
/* include all Core registers and bit definitions */
#include "defBF516.h"
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */
-
-/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "cdefBF51x_base.h"
-
-/* The following are the #defines needed by ADSP-BF516 that are not in the common header */
+/* BF516 is BF514 + EMAC */
+#include "cdefBF514.h"
/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
@@ -185,71 +178,4 @@
#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT)
#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val)
-/* Removable Storage Interface Registers */
-
-#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL)
-#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val)
-#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL)
-#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val)
-#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT)
-#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val)
-#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND)
-#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val)
-#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD)
-#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val)
-#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0)
-#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val)
-#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1)
-#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val)
-#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2)
-#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val)
-#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3)
-#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val)
-#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER)
-#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
-#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH)
-#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val)
-#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL)
-#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val)
-#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT)
-#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val)
-#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS)
-#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val)
-#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL)
-#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
-#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0)
-#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val)
-#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1)
-#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val)
-#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT)
-#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val)
-#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL)
-#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val)
-#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO)
-#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val)
-#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT)
-#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val)
-#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK)
-#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val)
-#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG)
-#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val)
-#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN)
-#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
-#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0)
-#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val)
-#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1)
-#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val)
-#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2)
-#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val)
-#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3)
-#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val)
-#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4)
-#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val)
-#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5)
-#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val)
-#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6)
-#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val)
-#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7)
-#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val)
-
#endif /* _CDEF_BF516_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
index 929b906..7fb7f0e 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF518.h
@@ -1,7 +1,7 @@
/*
* Copyright 2008-2009 Analog Devices Inc.
*
- * Licensed under the GPL-2 or later
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _CDEF_BF518_H
@@ -10,181 +10,10 @@
/* include all Core registers and bit definitions */
#include "defBF518.h"
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
+/* BF518 is BF516 + IEEE-1588 */
+#include "cdefBF516.h"
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */
-
-/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "cdefBF51x_base.h"
-
-/* The following are the #defines needed by ADSP-BF518 that are not in the common header */
-
-
-/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
-
-#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE)
-#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE, val)
-#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO)
-#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO, val)
-#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI)
-#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI, val)
-#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO)
-#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO, val)
-#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI)
-#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI, val)
-#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD)
-#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD, val)
-#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT)
-#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT, val)
-#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC)
-#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC, val)
-#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1)
-#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1, val)
-#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2)
-#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2, val)
-#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL)
-#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL, val)
-#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0)
-#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0, val)
-#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1)
-#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1, val)
-#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2)
-#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2, val)
-#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3)
-#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3, val)
-#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD)
-#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD, val)
-#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF)
-#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF, val)
-#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0)
-#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0, val)
-#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1)
-#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1, val)
-
-#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL)
-#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL, val)
-#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT)
-#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT, val)
-#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT)
-#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT, val)
-#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY)
-#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY, val)
-#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE)
-#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE, val)
-#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT)
-#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT, val)
-#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY)
-#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY, val)
-#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE)
-#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE, val)
-
-#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL)
-#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL, val)
-#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS)
-#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS, val)
-#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE)
-#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE, val)
-#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS)
-#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS, val)
-#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE)
-#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE, val)
-
-#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK)
-#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK, val)
-#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS)
-#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS, val)
-#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN)
-#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN, val)
-#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET)
-#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET, val)
-#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF)
-#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF, val)
-#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST)
-#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST, val)
-#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI)
-#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI, val)
-#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD)
-#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD, val)
-#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI)
-#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI, val)
-#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO)
-#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO, val)
-#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG)
-#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG, val)
-#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL)
-#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL, val)
-#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE)
-#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE, val)
-#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE)
-#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE, val)
-#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM)
-#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM, val)
-#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT)
-#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT, val)
-#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED)
-#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED, val)
-#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT)
-#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT, val)
-#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64)
-#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64, val)
-#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128)
-#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128, val)
-#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256)
-#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256, val)
-#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512)
-#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512, val)
-#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024)
-#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024, val)
-#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024)
-#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024, val)
-
-#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK)
-#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK, val)
-#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL)
-#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL, val)
-#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL)
-#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL, val)
-#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET)
-#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET, val)
-#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER)
-#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER, val)
-#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL)
-#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL, val)
-#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL)
-#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL, val)
-#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND)
-#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND, val)
-#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR)
-#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR, val)
-#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST)
-#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST, val)
-#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI)
-#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI, val)
-#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD)
-#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD, val)
-#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR)
-#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR, val)
-#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL)
-#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL, val)
-#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM)
-#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM, val)
-#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT)
-#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT, val)
-#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64)
-#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64, val)
-#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128)
-#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128, val)
-#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256)
-#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256, val)
-#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512)
-#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512, val)
-#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024)
-#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024, val)
-#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024)
-#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024, val)
-#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT)
-#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val)
+/* PTP TSYNC Registers */
#define bfin_read_EMAC_PTP_CTL() bfin_read16(EMAC_PTP_CTL)
#define bfin_write_EMAC_PTP_CTL(val) bfin_write16(EMAC_PTP_CTL, val)
@@ -227,72 +56,4 @@
#define bfin_read_EMAC_PTP_PPS_PERIOD() bfin_read32(EMAC_PTP_PPS_PERIOD)
#define bfin_write_EMAC_PTP_PPS_PERIOD(val) bfin_write32(EMAC_PTP_PPS_PERIOD, val)
-/* Removable Storage Interface Registers */
-
-#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL)
-#define bfin_write_RSI_PWR_CTL(val) bfin_write16(RSI_PWR_CONTROL, val)
-#define bfin_read_RSI_CLK_CTL() bfin_read16(RSI_CLK_CONTROL)
-#define bfin_write_RSI_CLK_CTL(val) bfin_write16(RSI_CLK_CONTROL, val)
-#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT)
-#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val)
-#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND)
-#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val)
-#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD)
-#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val)
-#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0)
-#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val)
-#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1)
-#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val)
-#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2)
-#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val)
-#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3)
-#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val)
-#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER)
-#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val)
-#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH)
-#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val)
-#define bfin_read_RSI_DATA_CTL() bfin_read16(RSI_DATA_CONTROL)
-#define bfin_write_RSI_DATA_CTL(val) bfin_write16(RSI_DATA_CONTROL, val)
-#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT)
-#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val)
-#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS)
-#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val)
-#define bfin_read_RSI_STATUS_CLR() bfin_read16(RSI_STATUSCL)
-#define bfin_write_RSI_STATUS_CLR(val) bfin_write16(RSI_STATUSCL, val)
-#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0)
-#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val)
-#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1)
-#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val)
-#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT)
-#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val)
-#define bfin_read_RSI_CEATA_CTL() bfin_read16(RSI_CEATA_CONTROL)
-#define bfin_write_RSI_CEATA_CTL(val) bfin_write16(RSI_CEATA_CONTROL, val)
-#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO)
-#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val)
-#define bfin_read_RSI_E_STATUS() bfin_read16(RSI_ESTAT)
-#define bfin_write_RSI_E_STATUS(val) bfin_write16(RSI_ESTAT, val)
-#define bfin_read_RSI_E_MASK() bfin_read16(RSI_EMASK)
-#define bfin_write_RSI_E_MASK(val) bfin_write16(RSI_EMASK, val)
-#define bfin_read_RSI_CFG() bfin_read16(RSI_CONFIG)
-#define bfin_write_RSI_CFG(val) bfin_write16(RSI_CONFIG, val)
-#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN)
-#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val)
-#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0)
-#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val)
-#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1)
-#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val)
-#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2)
-#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val)
-#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3)
-#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val)
-#define bfin_read_RSI_PID4() bfin_read16(RSI_PID4)
-#define bfin_write_RSI_PID4(val) bfin_write16(RSI_PID4, val)
-#define bfin_read_RSI_PID5() bfin_read16(RSI_PID5)
-#define bfin_write_RSI_PID5(val) bfin_write16(RSI_PID5, val)
-#define bfin_read_RSI_PID6() bfin_read16(RSI_PID6)
-#define bfin_write_RSI_PID6(val) bfin_write16(RSI_PID6, val)
-#define bfin_read_RSI_PID7() bfin_read16(RSI_PID7)
-#define bfin_write_RSI_PID7(val) bfin_write16(RSI_PID7, val)
-
-
#endif /* _CDEF_BF518_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
index 1d970df..e548e9d 100644
--- a/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/cdefBF51x_base.h
@@ -131,23 +131,6 @@
#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val)
-/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
-#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL)
-#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val)
-#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG)
-#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val)
-#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT)
-#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val)
-#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR)
-#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val)
-#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR)
-#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val)
-#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD)
-#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val)
-#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW)
-#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val)
-
-
/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG)
#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val)
@@ -844,6 +827,7 @@
#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val)
#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS)
#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val)
+#define bfin_clear_PPI_STATUS() bfin_write_PPI_STATUS(0xFFFF)
#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY)
#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val)
#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT)
@@ -1062,17 +1046,6 @@
#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN)
#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val)
-/* OTP/FUSE Registers */
-
-#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL)
-#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val)
-#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN)
-#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val)
-#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS)
-#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val)
-#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING)
-#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val)
-
/* Security Registers */
#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT)
@@ -1082,52 +1055,6 @@
#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS)
#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val)
-/* OTP Read/Write Data Buffer Registers */
-
-#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0)
-#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val)
-#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1)
-#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val)
-#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2)
-#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val)
-#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3)
-#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val)
-
-/* NFC Registers */
-
-#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL)
-#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val)
-#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT)
-#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val)
-#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT)
-#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val)
-#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK)
-#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val)
-#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0)
-#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val)
-#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1)
-#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val)
-#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2)
-#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val)
-#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3)
-#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val)
-#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT)
-#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val)
-#define bfin_read_NFC_RST() bfin_read16(NFC_RST)
-#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val)
-#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL)
-#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val)
-#define bfin_read_NFC_READ() bfin_read16(NFC_READ)
-#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val)
-#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR)
-#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val)
-#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD)
-#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val)
-#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR)
-#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val)
-#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD)
-#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val)
-
/* These need to be last due to the cdef/linux inter-dependencies */
#include <asm/irq.h>
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h
index b5adca2..92e950d 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -7,49 +7,8 @@
#ifndef _DEF_BF514_H
#define _DEF_BF514_H
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */
-
-/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "defBF51x_base.h"
-
-/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
-
-/* SDH Registers */
-
-#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */
-#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */
-#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */
-#define SDH_COMMAND 0xFFC0390C /* SDH Command */
-#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */
-#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */
-#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */
-#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */
-#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */
-#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */
-#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */
-#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */
-#define SDH_STATUS 0xFFC03934 /* SDH Status */
-#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */
-#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */
-#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */
-#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */
-#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */
-#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */
-#define SDH_CFG 0xFFC039C8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */
-#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */
-#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */
-#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */
-#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */
-#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */
-#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */
-#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */
-#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */
+/* BF514 is BF512 + RSI */
+#include "defBF512.h"
/* Removable Storage Interface Registers */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF516.h b/arch/blackfin/mach-bf518/include/mach/defBF516.h
index 7eb1877..22a3aa0 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF516.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF516.h
@@ -7,13 +7,8 @@
#ifndef _DEF_BF516_H
#define _DEF_BF516_H
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */
-
-/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "defBF51x_base.h"
+/* BF516 is BF514 + EMAC */
+#include "defBF514.h"
/* The following are the #defines needed by ADSP-BF516 that are not in the common header */
/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
@@ -394,208 +389,4 @@
#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
-/* SDH Registers */
-
-#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */
-#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */
-#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */
-#define SDH_COMMAND 0xFFC0390C /* SDH Command */
-#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */
-#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */
-#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */
-#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */
-#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */
-#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */
-#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */
-#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */
-#define SDH_STATUS 0xFFC03934 /* SDH Status */
-#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */
-#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */
-#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */
-#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */
-#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */
-#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */
-#define SDH_CFG 0xFFC039C8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */
-#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */
-#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */
-#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */
-#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */
-#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */
-#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */
-#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */
-#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */
-
-/* Removable Storage Interface Registers */
-
-#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */
-#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */
-#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */
-#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */
-#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */
-#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */
-#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */
-#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */
-#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */
-#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */
-#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */
-#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */
-#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */
-#define RSI_STATUS 0xFFC03834 /* RSI Status Register */
-#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */
-#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */
-#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */
-#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */
-#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */
-#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */
-#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */
-#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */
-#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */
-#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */
-#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */
-#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */
-#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */
-#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */
-#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */
-#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */
-#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
-#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
-
-/* ********************************************************** */
-/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
-/* and MULTI BIT READ MACROS */
-/* ********************************************************** */
-
-/* Bit masks for SDH_COMMAND */
-
-#define CMD_IDX 0x3f /* Command Index */
-#define CMD_RSP 0x40 /* Response */
-#define CMD_L_RSP 0x80 /* Long Response */
-#define CMD_INT_E 0x100 /* Command Interrupt */
-#define CMD_PEND_E 0x200 /* Command Pending */
-#define CMD_E 0x400 /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define PWR_ON 0x3 /* Power On */
-#if 0
-#define TBD 0x3c /* TBD */
-#endif
-#define SD_CMD_OD 0x40 /* Open Drain Output */
-#define ROD_CTL 0x80 /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define CLKDIV 0xff /* MC_CLK Divisor */
-#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
-#define PWR_SV_E 0x200 /* Power Save Enable */
-#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
-#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define RESP_CMD 0x3f /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define DTX_E 0x1 /* Data Transfer Enable */
-#define DTX_DIR 0x2 /* Data Transfer Direction */
-#define DTX_MODE 0x4 /* Data Transfer Mode */
-#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
-#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
-#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
-#define CMD_TIME_OUT 0x4 /* CMD Time Out */
-#define DAT_TIME_OUT 0x8 /* Data Time Out */
-#define TX_UNDERRUN 0x10 /* Transmit Underrun */
-#define RX_OVERRUN 0x20 /* Receive Overrun */
-#define CMD_RESP_END 0x40 /* CMD Response End */
-#define CMD_SENT 0x80 /* CMD Sent */
-#define DAT_END 0x100 /* Data End */
-#define START_BIT_ERR 0x200 /* Start Bit Error */
-#define DAT_BLK_END 0x400 /* Data Block End */
-#define CMD_ACT 0x800 /* CMD Active */
-#define TX_ACT 0x1000 /* Transmit Active */
-#define RX_ACT 0x2000 /* Receive Active */
-#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
-#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
-#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
-#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
-#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
-#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
-#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
-#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
-#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
-#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
-#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
-#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
-#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
-#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
-#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
-#define DAT_END_STAT 0x100 /* Data End Status */
-#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
-#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
-#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
-#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
-#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
-#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
-#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
-#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
-#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
-#define DAT_END_MASK 0x100 /* Data End Mask */
-#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
-#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
-#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
-#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
-#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
-#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
-#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
-#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
-#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
-#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
-#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
-#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
-#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define FIFO_COUNT 0x7fff /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
-#define SD_CARD_DET 0x10 /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
-#define SCD_MSK 0x40 /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define CLKS_EN 0x1 /* Clocks Enable */
-#define SD4E 0x4 /* SDIO 4-Bit Enable */
-#define MWE 0x8 /* Moving Window Enable */
-#define SD_RST 0x10 /* SDMMC Reset */
-#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
-#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
-#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define RWR 0x1 /* Read Wait Request */
-
#endif /* _DEF_BF516_H */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF518.h b/arch/blackfin/mach-bf518/include/mach/defBF518.h
index 794cf06..cb18270 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF518.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF518.h
@@ -7,461 +7,8 @@
#ifndef _DEF_BF518_H
#define _DEF_BF518_H
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */
-
-/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
-#include "defBF51x_base.h"
-
-/* The following are the #defines needed by ADSP-BF518 that are not in the common header */
-/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
-
-#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
-#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */
-#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */
-#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */
-#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */
-#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */
-#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */
-#define EMAC_FLC 0xFFC0301C /* Flow Control Register */
-#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */
-#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */
-#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */
-#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */
-#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */
-#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */
-#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */
-#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */
-#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */
-#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */
-#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */
-
-#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */
-#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */
-#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */
-#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */
-#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */
-#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */
-#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */
-#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */
-
-#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */
-#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */
-#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */
-#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */
-#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */
-
-#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */
-#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */
-#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */
-#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */
-#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */
-#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */
-#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */
-#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */
-#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */
-#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */
-#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */
-#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */
-#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */
-#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */
-#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */
-#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */
-#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */
-#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */
-#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */
-#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */
-#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
-#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
-#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
-#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */
-
-#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */
-#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */
-#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */
-#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */
-#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */
-#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */
-#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */
-#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */
-#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */
-#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */
-#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */
-#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */
-#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */
-#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */
-#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */
-#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */
-#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */
-#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */
-#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
-#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */
-#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
-#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */
-#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */
-
-/* Listing for IEEE-Supported Count Registers */
-
-#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */
-#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */
-#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */
-#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */
-#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */
-#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */
-#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */
-#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */
-#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */
-#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */
-#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */
-#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */
-#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */
-#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */
-#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */
-#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */
-#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */
-#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */
-#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */
-#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */
-#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
-#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
-#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
-#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */
-
-#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */
-#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */
-#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */
-#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */
-#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */
-#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */
-#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */
-#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */
-#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */
-#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */
-#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */
-#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */
-#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */
-#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */
-#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */
-#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */
-#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */
-#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */
-#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
-#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */
-#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
-#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */
-#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */
-
-/***********************************************************************************
-** System MMR Register Bits And Macros
-**
-** Disclaimer: All macros are intended to make C and Assembly code more readable.
-** Use these macros carefully, as any that do left shifts for field
-** depositing will result in the lower order bits being destroyed. Any
-** macro that shifts left to properly position the bit-field should be
-** used as part of an OR to initialize a register and NOT as a dynamic
-** modifier UNLESS the lower order bits are saved and ORed back in when
-** the macro is used.
-*************************************************************************************/
-
-/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/
-
-/* EMAC_OPMODE Masks */
-
-#define RE 0x00000001 /* Receiver Enable */
-#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */
-#define HU 0x00000010 /* Hash Filter Unicast Address */
-#define HM 0x00000020 /* Hash Filter Multicast Address */
-#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */
-#define PR 0x00000080 /* Promiscuous Mode Enable */
-#define IFE 0x00000100 /* Inverse Filtering Enable */
-#define DBF 0x00000200 /* Disable Broadcast Frame Reception */
-#define PBF 0x00000400 /* Pass Bad Frames Enable */
-#define PSF 0x00000800 /* Pass Short Frames Enable */
-#define RAF 0x00001000 /* Receive-All Mode */
-#define TE 0x00010000 /* Transmitter Enable */
-#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */
-#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */
-#define DC 0x00080000 /* Deferral Check */
-#define BOLMT 0x00300000 /* Back-Off Limit */
-#define BOLMT_10 0x00000000 /* 10-bit range */
-#define BOLMT_8 0x00100000 /* 8-bit range */
-#define BOLMT_4 0x00200000 /* 4-bit range */
-#define BOLMT_1 0x00300000 /* 1-bit range */
-#define DRTY 0x00400000 /* Disable TX Retry On Collision */
-#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */
-#define RMII 0x01000000 /* RMII/MII* Mode */
-#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */
-#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */
-#define LB 0x08000000 /* Internal Loopback Enable */
-#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */
-
-/* EMAC_STAADD Masks */
-
-#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */
-#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */
-#define STADISPRE 0x00000004 /* Disable Preamble Generation */
-#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */
-#define REGAD 0x000007C0 /* STA Register Address */
-#define PHYAD 0x0000F800 /* PHY Device Address */
-
-#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */
-#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */
-
-/* EMAC_STADAT Mask */
-
-#define STADATA 0x0000FFFF /* Station Management Data */
-
-/* EMAC_FLC Masks */
-
-#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */
-#define FLCE 0x00000002 /* Flow Control Enable */
-#define PCF 0x00000004 /* Pass Control Frames */
-#define BKPRSEN 0x00000008 /* Enable Backpressure */
-#define FLCPAUSE 0xFFFF0000 /* Pause Time */
-
-#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */
-
-/* EMAC_WKUP_CTL Masks */
-
-#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */
-#define MPKE 0x00000002 /* Magic Packet Enable */
-#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */
-#define GUWKE 0x00000008 /* Global Unicast Wake Enable */
-#define MPKS 0x00000020 /* Magic Packet Received Status */
-#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */
-
-/* EMAC_WKUP_FFCMD Masks */
-
-#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */
-#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */
-#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */
-#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */
-#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */
-#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */
-#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */
-#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */
-
-/* EMAC_WKUP_FFOFF Masks */
-
-#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */
-#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */
-#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */
-#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */
-
-#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */
-#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */
-#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */
-#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */
-/* Set ALL Offsets */
-#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
-
-/* EMAC_WKUP_FFCRC0 Masks */
-
-#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */
-#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */
-
-#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */
-#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */
-
-/* EMAC_WKUP_FFCRC1 Masks */
-
-#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */
-#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */
-
-#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */
-#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */
-
-/* EMAC_SYSCTL Masks */
-
-#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
-#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
-#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
-#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */
-#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
-
-#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */
-
-/* EMAC_SYSTAT Masks */
-
-#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */
-#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */
-#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */
-#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */
-#define WAKEDET 0x00000010 /* Wake-Up Detected Status */
-#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */
-#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */
-#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */
-
-/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
-
-#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */
-#define RX_COMP 0x00001000 /* RX Frame Complete */
-#define RX_OK 0x00002000 /* RX Frame Received With No Errors */
-#define RX_LONG 0x00004000 /* RX Frame Too Long Error */
-#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */
-#define RX_CRC 0x00010000 /* RX Frame CRC Error */
-#define RX_LEN 0x00020000 /* RX Frame Length Error */
-#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */
-#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */
-#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */
-#define RX_PHY 0x00200000 /* RX Frame PHY Error */
-#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */
-#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */
-#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */
-#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */
-#define RX_CTL 0x04000000 /* RX Control Frame Indicator */
-#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */
-#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */
-#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */
-#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */
-#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */
-
-/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */
-
-#define TX_COMP 0x00000001 /* TX Frame Complete */
-#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */
-#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */
-#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */
-#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */
-#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */
-#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */
-#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */
-#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */
-#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */
-#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */
-#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */
-#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */
-#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */
-#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */
-
-/* EMAC_MMC_CTL Masks */
-#define RSTC 0x00000001 /* Reset All Counters */
-#define CROLL 0x00000002 /* Counter Roll-Over Enable */
-#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */
-#define MMCE 0x00000008 /* Enable MMC Counter Operation */
-
-/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
-#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */
-#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */
-#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */
-#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */
-#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */
-#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */
-#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */
-#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */
-#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */
-#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */
-#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */
-#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */
-#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */
-#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */
-#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */
-#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */
-#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */
-#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */
-#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */
-#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */
-#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */
-#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */
-#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */
-#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */
-
-/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */
-
-#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */
-#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */
-#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */
-#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */
-#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */
-#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */
-#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */
-#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */
-#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */
-#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */
-#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */
-#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */
-#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */
-#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */
-#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */
-#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */
-#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */
-#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */
-#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */
-#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */
-#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */
-#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
-#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
-
-/* SDH Registers */
-
-#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */
-#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */
-#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */
-#define SDH_COMMAND 0xFFC0390C /* SDH Command */
-#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */
-#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */
-#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */
-#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */
-#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */
-#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */
-#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */
-#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */
-#define SDH_STATUS 0xFFC03934 /* SDH Status */
-#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */
-#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */
-#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */
-#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */
-#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */
-#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */
-#define SDH_CFG 0xFFC039C8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */
-#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */
-#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */
-#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */
-#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */
-#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */
-#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */
-#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */
-#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */
-
-/* Removable Storage Interface Registers */
-
-#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */
-#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */
-#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */
-#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */
-#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */
-#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */
-#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */
-#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */
-#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */
-#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */
-#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */
-#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */
-#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */
-#define RSI_STATUS 0xFFC03834 /* RSI Status Register */
-#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */
-#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */
-#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */
-#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */
-#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */
-#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */
-#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */
-#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */
-#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */
-#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */
-#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */
-#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */
-#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */
-#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */
-#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */
-#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */
-#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
-#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
+/* BF518 is BF516 + IEEE-1588 */
+#include "defBF516.h"
/* PTP TSYNC Registers */
@@ -489,141 +36,6 @@
#define EMAC_PTP_PPS_STARTHI 0xFFC030F4 /* PPS Start Time High */
#define EMAC_PTP_PPS_PERIOD 0xFFC030F8 /* PPS Count Register */
-/* ********************************************************** */
-/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
-/* and MULTI BIT READ MACROS */
-/* ********************************************************** */
-
-/* Bit masks for SDH_COMMAND */
-
-#define CMD_IDX 0x3f /* Command Index */
-#define CMD_RSP 0x40 /* Response */
-#define CMD_L_RSP 0x80 /* Long Response */
-#define CMD_INT_E 0x100 /* Command Interrupt */
-#define CMD_PEND_E 0x200 /* Command Pending */
-#define CMD_E 0x400 /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define PWR_ON 0x3 /* Power On */
-#if 0
-#define TBD 0x3c /* TBD */
-#endif
-#define SD_CMD_OD 0x40 /* Open Drain Output */
-#define ROD_CTL 0x80 /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define CLKDIV 0xff /* MC_CLK Divisor */
-#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
-#define PWR_SV_E 0x200 /* Power Save Enable */
-#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
-#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define RESP_CMD 0x3f /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define DTX_E 0x1 /* Data Transfer Enable */
-#define DTX_DIR 0x2 /* Data Transfer Direction */
-#define DTX_MODE 0x4 /* Data Transfer Mode */
-#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
-#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
-#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
-#define CMD_TIME_OUT 0x4 /* CMD Time Out */
-#define DAT_TIME_OUT 0x8 /* Data Time Out */
-#define TX_UNDERRUN 0x10 /* Transmit Underrun */
-#define RX_OVERRUN 0x20 /* Receive Overrun */
-#define CMD_RESP_END 0x40 /* CMD Response End */
-#define CMD_SENT 0x80 /* CMD Sent */
-#define DAT_END 0x100 /* Data End */
-#define START_BIT_ERR 0x200 /* Start Bit Error */
-#define DAT_BLK_END 0x400 /* Data Block End */
-#define CMD_ACT 0x800 /* CMD Active */
-#define TX_ACT 0x1000 /* Transmit Active */
-#define RX_ACT 0x2000 /* Receive Active */
-#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
-#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
-#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
-#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
-#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
-#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
-#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
-#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
-#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
-#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
-#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
-#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
-#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
-#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
-#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
-#define DAT_END_STAT 0x100 /* Data End Status */
-#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
-#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
-#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
-#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
-#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
-#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
-#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
-#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
-#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
-#define DAT_END_MASK 0x100 /* Data End Mask */
-#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
-#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
-#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
-#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
-#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
-#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
-#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
-#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
-#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
-#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
-#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
-#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
-#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define FIFO_COUNT 0x7fff /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
-#define SD_CARD_DET 0x10 /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
-#define SCD_MSK 0x40 /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define CLKS_EN 0x1 /* Clocks Enable */
-#define SD4E 0x4 /* SDIO 4-Bit Enable */
-#define MWE 0x8 /* Moving Window Enable */
-#define SD_RST 0x10 /* SDMMC Reset */
-#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
-#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
-#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define RWR 0x1 /* Read Wait Request */
-
/* Bit masks for EMAC_PTP_CTL */
#define PTP_EN 0x1 /* Enable the PTP_TSYNC module */
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index f9fd2b2..9241205 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -585,58 +585,6 @@
** modifier UNLESS the lower order bits are saved and ORed back in when
** the macro is used.
*************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks */
-#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define PLL_OFF 0x0002 /* PLL Not Powered */
-#define STOPCK 0x0008 /* Core Clock Off */
-#define PDWN 0x0020 /* Enter Deep Sleep Mode */
-#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
-#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
-#define BYPASS 0x0100 /* Bypass the PLL */
-#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
-#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-
-/* PLL_DIV Masks */
-#define SSEL 0x000F /* System Select */
-#define CSEL 0x0030 /* Core Select */
-#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
-#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
-#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
-#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
-/* PLL_DIV Macros */
-#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-
-/* VR_CTL Masks */
-#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
-#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-
-#define VLEV 0x00F0 /* Internal Voltage Level */
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
-#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */
-#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
-#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
-#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
-#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */
-
-/* PLL_STAT Masks */
-#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
-#define FULL_ON 0x0002 /* Processor In Full On Mode */
-#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
-#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
/* CHIPID Masks */
#define CHIPID_VERSION 0xF0000000
@@ -756,66 +704,6 @@
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
-/* ********* WATCHDOG TIMER MASKS ******************** */
-
-/* Watchdog Timer WDOG_CTL Register Masks */
-
-#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
-#define WDEV_RESET 0x0000 /* generate reset event on roll over */
-#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
-#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
-#define WDEV_NONE 0x0006 /* no event on roll over */
-#define WDEN 0x0FF0 /* enable watchdog */
-#define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */
-
-/* depreciated WDOG_CTL Register Masks for legacy code */
-
-
-#define ICTL WDEV
-#define ENABLE_RESET WDEV_RESET
-#define WDOG_RESET WDEV_RESET
-#define ENABLE_NMI WDEV_NMI
-#define WDOG_NMI WDEV_NMI
-#define ENABLE_GPI WDEV_GPI
-#define WDOG_GPI WDEV_GPI
-#define DISABLE_EVT WDEV_NONE
-#define WDOG_NONE WDEV_NONE
-
-#define TMR_EN WDEN
-#define TMR_DIS WDDIS
-#define TRO WDRO
-#define ICTL_P0 0x01
- #define ICTL_P1 0x02
-#define TRO_P 0x0F
-
-
-
-/* *************** REAL TIME CLOCK MASKS **************************/
-/* RTC_STAT and RTC_ALARM Masks */
-#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */
-#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */
-#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */
-#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */
-
-/* RTC_ALARM Macro z=day y=hr x=min w=sec */
-#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
-
-/* RTC_ICTL and RTC_ISTAT Masks */
-#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */
-#define ALARM 0x0002 /* Alarm Interrupt Enable */
-#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */
-#define MINUTE 0x0008 /* Minutes Interrupt Enable */
-#define HOUR 0x0010 /* Hours Interrupt Enable */
-#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */
-#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
-#define WRITE_PENDING 0x4000 /* Write Pending Status */
-#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */
-
-/* RTC_FAST / RTC_PREN Mask */
-#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */
-
-
/* ************** UART CONTROLLER MASKS *************************/
/* UARTx_LCR Masks */
#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
@@ -1372,33 +1260,6 @@
/* ************************** DMA CONTROLLER MASKS ********************************/
-/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
-#define DMAEN 0x0001 /* DMA Channel Enable */
-#define WNR 0x0002 /* Channel Direction (W/R*) */
-#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
-#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
-#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
-#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
-#define RESTART 0x0020 /* DMA Buffer Clear */
-#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
-#define DI_EN 0x0080 /* Data Interrupt Enable */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-#define NDSIZE 0x0900 /* Next Descriptor Size */
-#define DMAFLOW 0x7000 /* Flow Control */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
@@ -1416,13 +1277,6 @@
#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
-#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
-#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
-#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
-
-
/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
/* PPI_CONTROL Masks */
#define PORT_EN 0x0001 /* PPI Port Enable */
@@ -1830,46 +1684,6 @@
#define BNDMODE_CAPT 0x2000 /* boundary capture mode */
#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */
-/* Bit masks for OTP_CONTROL */
-
-#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
-#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */
-#define nFIEN 0x0
-#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */
-#define nFTESTDEC 0x0
-#define FWRTEST 0x2000 /* OTP/Fuse Write Test */
-#define nFWRTEST 0x0
-#define FRDEN 0x4000 /* OTP/Fuse Read Enable */
-#define nFRDEN 0x0
-#define FWREN 0x8000 /* OTP/Fuse Write Enable */
-#define nFWREN 0x0
-
-/* Bit masks for OTP_BEN */
-
-#define FBEN 0xffff /* OTP/Fuse Byte Enable */
-
-/* Bit masks for OTP_STATUS */
-
-#define FCOMP 0x1 /* OTP/Fuse Access Complete */
-#define nFCOMP 0x0
-#define FERROR 0x2 /* OTP/Fuse Access Error */
-#define nFERROR 0x0
-#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */
-#define nMMRGLOAD 0x0
-#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */
-#define nMMRGLOCK 0x0
-#define FPGMEN 0x40 /* OTP/Fuse Program Enable */
-#define nFPGMEN 0x0
-
-/* Bit masks for OTP_TIMING */
-
-#define USECDIV 0xff /* Micro Second Divider */
-#define READACC 0x7f00 /* Read Access Time */
-#define CPUMPRL 0x38000 /* Charge Pump Release Time */
-#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */
-#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */
-#define PGMTIME 0xff000000 /* Program Time */
-
/* Bit masks for SECURE_SYSSWT */
#define EMUDABL 0x1 /* Emulation Disable. */
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 848ac6f..1f8cbe9 100644
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -1,3 +1,7 @@
+config BF52x
+ def_bool y
+ depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
+
if (BF52x)
source "arch/blackfin/mach-bf527/boards/Kconfig"
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f1996b1..7ab0800 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -15,9 +15,6 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/etherdevice.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
@@ -65,7 +62,7 @@
};
static struct platform_device bfin_isp1760_device = {
- .name = "isp1760-hcd",
+ .name = "isp1760",
.id = 0,
.dev = {
.platform_data = &isp1760_priv,
@@ -317,45 +314,6 @@
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
- {
- .start = 0x20360000,
- .end = 0x20360000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20360004,
- .end = 0x20360004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
- .sel15Kres = 1,
- .clknotstop = 0,
- .oc_enable = 0,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_connected = 0,
- .no_power_switching = 1,
- .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
- .name = "isp1362-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1362_priv,
- },
- .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
- .resource = isp1362_hcd_resources,
-};
-#endif
-
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
@@ -841,10 +799,6 @@
&sl811_hcd_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
- &isp1362_hcd_device,
-#endif
-
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
&bfin_isp1760_device,
#endif
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index f09665f..5294fdd 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -13,9 +13,6 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
@@ -63,7 +60,7 @@
};
static struct platform_device bfin_isp1760_device = {
- .name = "isp1760-hcd",
+ .name = "isp1760",
.id = 0,
.dev = {
.platform_data = &isp1760_priv,
@@ -373,45 +370,6 @@
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
- {
- .start = 0x20360000,
- .end = 0x20360000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20360004,
- .end = 0x20360004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
- .sel15Kres = 1,
- .clknotstop = 0,
- .oc_enable = 0,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_connected = 0,
- .no_power_switching = 1,
- .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
- .name = "isp1362-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1362_priv,
- },
- .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
- .resource = isp1362_hcd_resources,
-};
-#endif
-
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
@@ -688,12 +646,6 @@
};
#endif /* spi master and devices */
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
- .name = "bf537-lq035",
-};
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0
@@ -850,7 +802,7 @@
};
#endif
-#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#include <linux/input.h>
#include <asm/bfin_rotary.h>
@@ -924,10 +876,6 @@
&sl811_hcd_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
- &isp1362_hcd_device,
-#endif
-
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
&bfin_isp1760_device,
#endif
@@ -957,10 +905,6 @@
&bfin_spi0_device,
#endif
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
- &bfin_fb_device,
-#endif
-
#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
&bf52x_t350mcqb_device,
#endif
@@ -991,7 +935,7 @@
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
&bfin_rotary_device,
#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index e7d6034..f714c5d 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -46,10 +46,4 @@
#define OFFSET_SCR 0x1C /* SCR Scratch Register */
#define OFFSET_GCTL 0x24 /* Global Control Register */
-/* PLL_DIV Masks */
-#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
-#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
-#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */
-#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */
-
#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
index dc3119e9..d7e2751 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
@@ -10,15 +10,8 @@
/* include all Core registers and bit definitions */
#include "defBF525.h"
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
-
-/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "cdefBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF525 that are not in the common header */
+/* BF525 is BF522 + USB */
+#include "cdefBF522.h"
/* USB Control Registers */
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
index d6579449..c7ba544 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
@@ -10,15 +10,8 @@
/* include all Core registers and bit definitions */
#include "defBF527.h"
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
-
-/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "cdefBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF527 that are not in the common header */
+/* BF527 is BF525 + EMAC */
+#include "cdefBF525.h"
/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
@@ -185,417 +178,4 @@
#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT)
#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val)
-/* USB Control Registers */
-
-#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR)
-#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val)
-#define bfin_read_USB_POWER() bfin_read16(USB_POWER)
-#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val)
-#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX)
-#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val)
-#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX)
-#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val)
-#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE)
-#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val)
-#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE)
-#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val)
-#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB)
-#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val)
-#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE)
-#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val)
-#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME)
-#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val)
-#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX)
-#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val)
-#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE)
-#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val)
-#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR)
-#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val)
-#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL)
-#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val)
-
-/* USB Packet Control Registers */
-
-#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET)
-#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val)
-#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0)
-#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val)
-#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR)
-#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val)
-#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET)
-#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val)
-#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR)
-#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val)
-#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0)
-#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val)
-#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT)
-#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val)
-#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE)
-#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val)
-#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0)
-#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val)
-#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL)
-#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val)
-#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE)
-#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val)
-#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL)
-#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val)
-#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT)
-#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val)
-
-/* USB Endpoint FIFO Registers */
-
-#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO)
-#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val)
-#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO)
-#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val)
-#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO)
-#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val)
-#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO)
-#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val)
-#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO)
-#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val)
-#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO)
-#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val)
-#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO)
-#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val)
-#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO)
-#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val)
-
-/* USB OTG Control Registers */
-
-#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL)
-#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val)
-#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ)
-#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val)
-#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK)
-#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val)
-
-/* USB Phy Control Registers */
-
-#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO)
-#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val)
-#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN)
-#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val)
-#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1)
-#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val)
-#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1)
-#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val)
-#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1)
-#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val)
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL)
-#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val)
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB)
-#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val)
-
-#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2)
-#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val)
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST)
-#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val)
-
-#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL)
-#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val)
-#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV)
-#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val)
-
-/* USB Endpoint 0 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP)
-#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val)
-#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR)
-#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val)
-#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP)
-#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val)
-#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR)
-#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val)
-#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT)
-#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val)
-#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE)
-#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val)
-#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL)
-#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE)
-#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val)
-#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL)
-#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT)
-#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val)
-
-/* USB Endpoint 1 Control Registers */
-
-#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP)
-#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val)
-#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR)
-#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val)
-#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP)
-#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val)
-#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR)
-#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val)
-#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT)
-#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE)
-#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val)
-#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL)
-#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE)
-#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val)
-#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL)
-#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT)
-#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val)
-
-/* USB Endpoint 2 Control Registers */
-
-#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP)
-#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val)
-#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR)
-#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val)
-#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP)
-#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val)
-#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR)
-#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val)
-#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT)
-#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE)
-#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val)
-#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL)
-#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE)
-#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val)
-#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL)
-#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT)
-#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val)
-
-/* USB Endpoint 3 Control Registers */
-
-#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP)
-#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val)
-#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR)
-#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val)
-#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP)
-#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val)
-#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR)
-#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val)
-#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT)
-#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE)
-#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val)
-#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL)
-#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE)
-#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val)
-#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL)
-#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT)
-#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val)
-
-/* USB Endpoint 4 Control Registers */
-
-#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP)
-#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val)
-#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR)
-#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val)
-#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP)
-#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val)
-#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR)
-#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val)
-#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT)
-#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE)
-#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val)
-#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL)
-#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE)
-#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val)
-#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL)
-#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT)
-#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val)
-
-/* USB Endpoint 5 Control Registers */
-
-#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP)
-#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val)
-#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR)
-#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val)
-#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP)
-#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val)
-#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR)
-#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val)
-#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT)
-#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE)
-#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val)
-#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL)
-#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE)
-#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val)
-#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL)
-#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT)
-#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val)
-
-/* USB Endpoint 6 Control Registers */
-
-#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP)
-#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val)
-#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR)
-#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val)
-#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP)
-#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val)
-#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR)
-#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val)
-#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT)
-#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE)
-#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val)
-#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL)
-#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE)
-#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val)
-#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL)
-#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT)
-#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val)
-
-/* USB Endpoint 7 Control Registers */
-
-#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP)
-#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val)
-#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR)
-#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val)
-#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP)
-#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val)
-#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR)
-#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val)
-#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT)
-#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE)
-#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val)
-#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL)
-#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE)
-#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val)
-#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL)
-#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT)
-#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val)
-
-#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT)
-#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val)
-
-/* USB Channel 0 Config Registers */
-
-#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL)
-#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val)
-#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW)
-#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val)
-#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH)
-#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val)
-#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW)
-#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val)
-#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH)
-#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val)
-
-/* USB Channel 1 Config Registers */
-
-#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL)
-#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val)
-#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW)
-#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val)
-#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH)
-#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val)
-#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW)
-#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val)
-#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH)
-#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val)
-
-/* USB Channel 2 Config Registers */
-
-#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL)
-#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val)
-#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW)
-#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val)
-#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH)
-#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val)
-#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW)
-#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val)
-#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH)
-#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val)
-
-/* USB Channel 3 Config Registers */
-
-#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL)
-#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val)
-#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW)
-#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val)
-#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH)
-#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val)
-#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW)
-#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val)
-#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH)
-#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val)
-
-/* USB Channel 4 Config Registers */
-
-#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL)
-#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val)
-#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW)
-#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val)
-#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH)
-#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val)
-#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW)
-#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val)
-#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH)
-#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val)
-
-/* USB Channel 5 Config Registers */
-
-#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL)
-#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val)
-#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW)
-#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val)
-#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH)
-#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val)
-#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW)
-#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val)
-#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH)
-#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val)
-
-/* USB Channel 6 Config Registers */
-
-#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL)
-#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val)
-#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW)
-#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val)
-#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH)
-#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val)
-#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW)
-#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val)
-#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH)
-#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val)
-
-/* USB Channel 7 Config Registers */
-
-#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL)
-#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val)
-#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW)
-#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val)
-#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH)
-#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val)
-#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW)
-#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val)
-#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH)
-#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val)
-
#endif /* _CDEF_BF527_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 7014dde..12f2ad4 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -844,6 +844,7 @@
#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val)
#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS)
#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val)
+#define bfin_clear_PPI_STATUS() bfin_write_PPI_STATUS(0xFFFF)
#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY)
#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val)
#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT)
@@ -1062,17 +1063,6 @@
#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN)
#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val)
-/* OTP/FUSE Registers */
-
-#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL)
-#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val)
-#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN)
-#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val)
-#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS)
-#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val)
-#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING)
-#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val)
-
/* Security Registers */
#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT)
@@ -1082,17 +1072,6 @@
#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS)
#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val)
-/* OTP Read/Write Data Buffer Registers */
-
-#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0)
-#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val)
-#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1)
-#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val)
-#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2)
-#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val)
-#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3)
-#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val)
-
/* NFC Registers */
#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL)
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
index 82abefc..c136f70 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -7,15 +7,8 @@
#ifndef _DEF_BF525_H
#define _DEF_BF525_H
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
-
-/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "defBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF525 that are not in the common header */
+/* BF525 is BF522 + USB */
+#include "defBF522.h"
/* USB Control Registers */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
index 570a125..4dd58fb 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -7,15 +7,9 @@
#ifndef _DEF_BF527_H
#define _DEF_BF527_H
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
+/* BF527 is BF525 + EMAC */
+#include "defBF525.h"
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
-
-/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "defBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF527 that are not in the common header */
/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
@@ -394,673 +388,4 @@
#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
-/* USB Control Registers */
-
-#define USB_FADDR 0xffc03800 /* Function address register */
-#define USB_POWER 0xffc03804 /* Power management register */
-#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */
-#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */
-#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */
-#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */
-#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */
-#define USB_FRAME 0xffc03820 /* USB frame number */
-#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */
-#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */
-#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */
-
-/* USB Packet Control Registers */
-
-#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */
-#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */
-#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */
-#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* USB Endpoint FIFO Registers */
-
-#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */
-#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */
-#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */
-#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */
-#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */
-#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */
-#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */
-#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */
-
-/* USB OTG Control Registers */
-
-#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */
-#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */
-#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */
-
-/* USB Phy Control Registers */
-
-#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */
-#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */
-#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */
-#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */
-#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */
-
-#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */
-
-#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */
-#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
-
-/* USB Endpoint 0 Control Registers */
-
-#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */
-#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */
-#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */
-#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */
-#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
-
-/* USB Endpoint 1 Control Registers */
-
-#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */
-#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */
-#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */
-#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */
-#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-
-/* USB Endpoint 2 Control Registers */
-
-#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */
-#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */
-#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */
-#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */
-#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
-
-/* USB Endpoint 3 Control Registers */
-
-#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */
-#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */
-#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */
-#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */
-#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-
-/* USB Endpoint 4 Control Registers */
-
-#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */
-#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */
-#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */
-#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */
-#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
-
-/* USB Endpoint 5 Control Registers */
-
-#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */
-#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */
-#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */
-#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */
-#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */
-
-/* USB Endpoint 6 Control Registers */
-
-#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */
-#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */
-#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */
-#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */
-#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
-
-/* USB Endpoint 7 Control Registers */
-
-#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */
-#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */
-#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */
-#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */
-#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
-
-#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */
-
-/* USB Channel 0 Config Registers */
-
-#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */
-#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-
-/* USB Channel 1 Config Registers */
-
-#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */
-#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-
-/* USB Channel 2 Config Registers */
-
-#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */
-#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-
-/* USB Channel 3 Config Registers */
-
-#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */
-#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-
-/* USB Channel 4 Config Registers */
-
-#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */
-#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-
-/* USB Channel 5 Config Registers */
-
-#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */
-#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-
-/* USB Channel 6 Config Registers */
-
-#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */
-#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-
-/* USB Channel 7 Config Registers */
-
-#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */
-#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
-
-/* Bit masks for USB_FADDR */
-
-#define FUNCTION_ADDRESS 0x7f /* Function address */
-
-/* Bit masks for USB_POWER */
-
-#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
-#define nENABLE_SUSPENDM 0x0
-#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
-#define nSUSPEND_MODE 0x0
-#define RESUME_MODE 0x4 /* DMA Mode */
-#define nRESUME_MODE 0x0
-#define RESET 0x8 /* Reset indicator */
-#define nRESET 0x0
-#define HS_MODE 0x10 /* High Speed mode indicator */
-#define nHS_MODE 0x0
-#define HS_ENABLE 0x20 /* high Speed Enable */
-#define nHS_ENABLE 0x0
-#define SOFT_CONN 0x40 /* Soft connect */
-#define nSOFT_CONN 0x0
-#define ISO_UPDATE 0x80 /* Isochronous update */
-#define nISO_UPDATE 0x0
-
-/* Bit masks for USB_INTRTX */
-
-#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
-#define nEP0_TX 0x0
-#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
-#define nEP1_TX 0x0
-#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
-#define nEP2_TX 0x0
-#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
-#define nEP3_TX 0x0
-#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
-#define nEP4_TX 0x0
-#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
-#define nEP5_TX 0x0
-#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
-#define nEP6_TX 0x0
-#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
-#define nEP7_TX 0x0
-
-/* Bit masks for USB_INTRRX */
-
-#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
-#define nEP1_RX 0x0
-#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
-#define nEP2_RX 0x0
-#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
-#define nEP3_RX 0x0
-#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
-#define nEP4_RX 0x0
-#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
-#define nEP5_RX 0x0
-#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
-#define nEP6_RX 0x0
-#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
-#define nEP7_RX 0x0
-
-/* Bit masks for USB_INTRTXE */
-
-#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
-#define nEP0_TX_E 0x0
-#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
-#define nEP1_TX_E 0x0
-#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
-#define nEP2_TX_E 0x0
-#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
-#define nEP3_TX_E 0x0
-#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
-#define nEP4_TX_E 0x0
-#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
-#define nEP5_TX_E 0x0
-#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
-#define nEP6_TX_E 0x0
-#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
-#define nEP7_TX_E 0x0
-
-/* Bit masks for USB_INTRRXE */
-
-#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
-#define nEP1_RX_E 0x0
-#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
-#define nEP2_RX_E 0x0
-#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
-#define nEP3_RX_E 0x0
-#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
-#define nEP4_RX_E 0x0
-#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
-#define nEP5_RX_E 0x0
-#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
-#define nEP6_RX_E 0x0
-#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
-#define nEP7_RX_E 0x0
-
-/* Bit masks for USB_INTRUSB */
-
-#define SUSPEND_B 0x1 /* Suspend indicator */
-#define nSUSPEND_B 0x0
-#define RESUME_B 0x2 /* Resume indicator */
-#define nRESUME_B 0x0
-#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
-#define nRESET_OR_BABLE_B 0x0
-#define SOF_B 0x8 /* Start of frame */
-#define nSOF_B 0x0
-#define CONN_B 0x10 /* Connection indicator */
-#define nCONN_B 0x0
-#define DISCON_B 0x20 /* Disconnect indicator */
-#define nDISCON_B 0x0
-#define SESSION_REQ_B 0x40 /* Session Request */
-#define nSESSION_REQ_B 0x0
-#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
-#define nVBUS_ERROR_B 0x0
-
-/* Bit masks for USB_INTRUSBE */
-
-#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
-#define nSUSPEND_BE 0x0
-#define RESUME_BE 0x2 /* Resume indicator int enable */
-#define nRESUME_BE 0x0
-#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
-#define nRESET_OR_BABLE_BE 0x0
-#define SOF_BE 0x8 /* Start of frame int enable */
-#define nSOF_BE 0x0
-#define CONN_BE 0x10 /* Connection indicator int enable */
-#define nCONN_BE 0x0
-#define DISCON_BE 0x20 /* Disconnect indicator int enable */
-#define nDISCON_BE 0x0
-#define SESSION_REQ_BE 0x40 /* Session Request int enable */
-#define nSESSION_REQ_BE 0x0
-#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
-#define nVBUS_ERROR_BE 0x0
-
-/* Bit masks for USB_FRAME */
-
-#define FRAME_NUMBER 0x7ff /* Frame number */
-
-/* Bit masks for USB_INDEX */
-
-#define SELECTED_ENDPOINT 0xf /* selected endpoint */
-
-/* Bit masks for USB_GLOBAL_CTL */
-
-#define GLOBAL_ENA 0x1 /* enables USB module */
-#define nGLOBAL_ENA 0x0
-#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
-#define nEP1_TX_ENA 0x0
-#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
-#define nEP2_TX_ENA 0x0
-#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
-#define nEP3_TX_ENA 0x0
-#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
-#define nEP4_TX_ENA 0x0
-#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
-#define nEP5_TX_ENA 0x0
-#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
-#define nEP6_TX_ENA 0x0
-#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
-#define nEP7_TX_ENA 0x0
-#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
-#define nEP1_RX_ENA 0x0
-#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
-#define nEP2_RX_ENA 0x0
-#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
-#define nEP3_RX_ENA 0x0
-#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
-#define nEP4_RX_ENA 0x0
-#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
-#define nEP5_RX_ENA 0x0
-#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
-#define nEP6_RX_ENA 0x0
-#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
-#define nEP7_RX_ENA 0x0
-
-/* Bit masks for USB_OTG_DEV_CTL */
-
-#define SESSION 0x1 /* session indicator */
-#define nSESSION 0x0
-#define HOST_REQ 0x2 /* Host negotiation request */
-#define nHOST_REQ 0x0
-#define HOST_MODE 0x4 /* indicates USBDRC is a host */
-#define nHOST_MODE 0x0
-#define VBUS0 0x8 /* Vbus level indicator[0] */
-#define nVBUS0 0x0
-#define VBUS1 0x10 /* Vbus level indicator[1] */
-#define nVBUS1 0x0
-#define LSDEV 0x20 /* Low-speed indicator */
-#define nLSDEV 0x0
-#define FSDEV 0x40 /* Full or High-speed indicator */
-#define nFSDEV 0x0
-#define B_DEVICE 0x80 /* A' or 'B' device indicator */
-#define nB_DEVICE 0x0
-
-/* Bit masks for USB_OTG_VBUS_IRQ */
-
-#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
-#define nDRIVE_VBUS_ON 0x0
-#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
-#define nDRIVE_VBUS_OFF 0x0
-#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
-#define nCHRG_VBUS_START 0x0
-#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
-#define nCHRG_VBUS_END 0x0
-#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
-#define nDISCHRG_VBUS_START 0x0
-#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
-#define nDISCHRG_VBUS_END 0x0
-
-/* Bit masks for USB_OTG_VBUS_MASK */
-
-#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
-#define nDRIVE_VBUS_ON_ENA 0x0
-#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
-#define nDRIVE_VBUS_OFF_ENA 0x0
-#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
-#define nCHRG_VBUS_START_ENA 0x0
-#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
-#define nCHRG_VBUS_END_ENA 0x0
-#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
-#define nDISCHRG_VBUS_START_ENA 0x0
-#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
-#define nDISCHRG_VBUS_END_ENA 0x0
-
-/* Bit masks for USB_CSR0 */
-
-#define RXPKTRDY 0x1 /* data packet receive indicator */
-#define nRXPKTRDY 0x0
-#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
-#define nTXPKTRDY 0x0
-#define STALL_SENT 0x4 /* STALL handshake sent */
-#define nSTALL_SENT 0x0
-#define DATAEND 0x8 /* Data end indicator */
-#define nDATAEND 0x0
-#define SETUPEND 0x10 /* Setup end */
-#define nSETUPEND 0x0
-#define SENDSTALL 0x20 /* Send STALL handshake */
-#define nSENDSTALL 0x0
-#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
-#define nSERVICED_RXPKTRDY 0x0
-#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
-#define nSERVICED_SETUPEND 0x0
-#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
-#define nFLUSHFIFO 0x0
-#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
-#define nSTALL_RECEIVED_H 0x0
-#define SETUPPKT_H 0x8 /* send Setup token host mode */
-#define nSETUPPKT_H 0x0
-#define ERROR_H 0x10 /* timeout error indicator host mode */
-#define nERROR_H 0x0
-#define REQPKT_H 0x20 /* Request an IN transaction host mode */
-#define nREQPKT_H 0x0
-#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
-#define nSTATUSPKT_H 0x0
-#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
-#define nNAK_TIMEOUT_H 0x0
-
-/* Bit masks for USB_COUNT0 */
-
-#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
-
-/* Bit masks for USB_NAKLIMIT0 */
-
-#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
-
-/* Bit masks for USB_TX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_RX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_TXCSR */
-
-#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
-#define nTXPKTRDY_T 0x0
-#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
-#define nFIFO_NOT_EMPTY_T 0x0
-#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
-#define nUNDERRUN_T 0x0
-#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
-#define nFLUSHFIFO_T 0x0
-#define STALL_SEND_T 0x10 /* issue a Stall handshake */
-#define nSTALL_SEND_T 0x0
-#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
-#define nSTALL_SENT_T 0x0
-#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
-#define nCLEAR_DATATOGGLE_T 0x0
-#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
-#define nINCOMPTX_T 0x0
-#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
-#define nDMAREQMODE_T 0x0
-#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
-#define nFORCE_DATATOGGLE_T 0x0
-#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
-#define nDMAREQ_ENA_T 0x0
-#define ISO_T 0x4000 /* enable Isochronous transfers */
-#define nISO_T 0x0
-#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
-#define nAUTOSET_T 0x0
-#define ERROR_TH 0x4 /* error condition host mode */
-#define nERROR_TH 0x0
-#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
-#define nSTALL_RECEIVED_TH 0x0
-#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
-#define nNAK_TIMEOUT_TH 0x0
-
-/* Bit masks for USB_TXCOUNT */
-
-#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* Bit masks for USB_RXCSR */
-
-#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
-#define nRXPKTRDY_R 0x0
-#define FIFO_FULL_R 0x2 /* FIFO not empty */
-#define nFIFO_FULL_R 0x0
-#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
-#define nOVERRUN_R 0x0
-#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
-#define nDATAERROR_R 0x0
-#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
-#define nFLUSHFIFO_R 0x0
-#define STALL_SEND_R 0x20 /* issue a Stall handshake */
-#define nSTALL_SEND_R 0x0
-#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
-#define nSTALL_SENT_R 0x0
-#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
-#define nCLEAR_DATATOGGLE_R 0x0
-#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
-#define nINCOMPRX_R 0x0
-#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
-#define nDMAREQMODE_R 0x0
-#define DISNYET_R 0x1000 /* disable Nyet handshakes */
-#define nDISNYET_R 0x0
-#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
-#define nDMAREQ_ENA_R 0x0
-#define ISO_R 0x4000 /* enable Isochronous transfers */
-#define nISO_R 0x0
-#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
-#define nAUTOCLEAR_R 0x0
-#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
-#define nERROR_RH 0x0
-#define REQPKT_RH 0x20 /* request an IN transaction host mode */
-#define nREQPKT_RH 0x0
-#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
-#define nSTALL_RECEIVED_RH 0x0
-#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
-#define nINCOMPRX_RH 0x0
-#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
-#define nDMAREQMODE_RH 0x0
-#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
-#define nAUTOREQ_RH 0x0
-
-/* Bit masks for USB_RXCOUNT */
-
-#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
-
-/* Bit masks for USB_TXTYPE */
-
-#define TARGET_EP_NO_T 0xf /* EP number */
-#define PROTOCOL_T 0xc /* transfer type */
-
-/* Bit masks for USB_TXINTERVAL */
-
-#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
-
-/* Bit masks for USB_RXTYPE */
-
-#define TARGET_EP_NO_R 0xf /* EP number */
-#define PROTOCOL_R 0xc /* transfer type */
-
-/* Bit masks for USB_RXINTERVAL */
-
-#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
-
-/* Bit masks for USB_DMA_INTERRUPT */
-
-#define DMA0_INT 0x1 /* DMA0 pending interrupt */
-#define nDMA0_INT 0x0
-#define DMA1_INT 0x2 /* DMA1 pending interrupt */
-#define nDMA1_INT 0x0
-#define DMA2_INT 0x4 /* DMA2 pending interrupt */
-#define nDMA2_INT 0x0
-#define DMA3_INT 0x8 /* DMA3 pending interrupt */
-#define nDMA3_INT 0x0
-#define DMA4_INT 0x10 /* DMA4 pending interrupt */
-#define nDMA4_INT 0x0
-#define DMA5_INT 0x20 /* DMA5 pending interrupt */
-#define nDMA5_INT 0x0
-#define DMA6_INT 0x40 /* DMA6 pending interrupt */
-#define nDMA6_INT 0x0
-#define DMA7_INT 0x80 /* DMA7 pending interrupt */
-#define nDMA7_INT 0x0
-
-/* Bit masks for USB_DMAxCONTROL */
-
-#define DMA_ENA 0x1 /* DMA enable */
-#define nDMA_ENA 0x0
-#define DIRECTION 0x2 /* direction of DMA transfer */
-#define nDIRECTION 0x0
-#define MODE 0x4 /* DMA Bus error */
-#define nMODE 0x0
-#define INT_ENA 0x8 /* Interrupt enable */
-#define nINT_ENA 0x0
-#define EPNUM 0xf0 /* EP number */
-#define BUSERROR 0x100 /* DMA Bus error */
-#define nBUSERROR 0x0
-
-/* Bit masks for USB_DMAxADDRHIGH */
-
-#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxADDRLOW */
-
-#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTHIGH */
-
-#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTLOW */
-
-#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
-
#endif /* _DEF_BF527_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index b9dbb73..8b18b53 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -586,58 +586,6 @@
** modifier UNLESS the lower order bits are saved and ORed back in when
** the macro is used.
*************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks */
-#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define PLL_OFF 0x0002 /* PLL Not Powered */
-#define STOPCK 0x0008 /* Core Clock Off */
-#define PDWN 0x0020 /* Enter Deep Sleep Mode */
-#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
-#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
-#define BYPASS 0x0100 /* Bypass the PLL */
-#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
-#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-
-/* PLL_DIV Masks */
-#define SSEL 0x000F /* System Select */
-#define CSEL 0x0030 /* Core Select */
-#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
-#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
-#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
-#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
-/* PLL_DIV Macros */
-#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-
-/* VR_CTL Masks */
-#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
-#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-
-#define VLEV 0x00F0 /* Internal Voltage Level */
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
-#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */
-#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
-#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
-#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
-#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */
-
-/* PLL_STAT Masks */
-#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
-#define FULL_ON 0x0002 /* Processor In Full On Mode */
-#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
-#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
/* CHIPID Masks */
#define CHIPID_VERSION 0xF0000000
@@ -757,66 +705,6 @@
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
-/* ********* WATCHDOG TIMER MASKS ******************** */
-
-/* Watchdog Timer WDOG_CTL Register Masks */
-
-#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
-#define WDEV_RESET 0x0000 /* generate reset event on roll over */
-#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
-#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
-#define WDEV_NONE 0x0006 /* no event on roll over */
-#define WDEN 0x0FF0 /* enable watchdog */
-#define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */
-
-/* depreciated WDOG_CTL Register Masks for legacy code */
-
-
-#define ICTL WDEV
-#define ENABLE_RESET WDEV_RESET
-#define WDOG_RESET WDEV_RESET
-#define ENABLE_NMI WDEV_NMI
-#define WDOG_NMI WDEV_NMI
-#define ENABLE_GPI WDEV_GPI
-#define WDOG_GPI WDEV_GPI
-#define DISABLE_EVT WDEV_NONE
-#define WDOG_NONE WDEV_NONE
-
-#define TMR_EN WDEN
-#define TMR_DIS WDDIS
-#define TRO WDRO
-#define ICTL_P0 0x01
- #define ICTL_P1 0x02
-#define TRO_P 0x0F
-
-
-
-/* *************** REAL TIME CLOCK MASKS **************************/
-/* RTC_STAT and RTC_ALARM Masks */
-#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */
-#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */
-#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */
-#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */
-
-/* RTC_ALARM Macro z=day y=hr x=min w=sec */
-#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
-
-/* RTC_ICTL and RTC_ISTAT Masks */
-#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */
-#define ALARM 0x0002 /* Alarm Interrupt Enable */
-#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */
-#define MINUTE 0x0008 /* Minutes Interrupt Enable */
-#define HOUR 0x0010 /* Hours Interrupt Enable */
-#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */
-#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
-#define WRITE_PENDING 0x4000 /* Write Pending Status */
-#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */
-
-/* RTC_FAST / RTC_PREN Mask */
-#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */
-
-
/* ************** UART CONTROLLER MASKS *************************/
/* UARTx_LCR Masks */
#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
@@ -1381,33 +1269,6 @@
/* ************************** DMA CONTROLLER MASKS ********************************/
-/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
-#define DMAEN 0x0001 /* DMA Channel Enable */
-#define WNR 0x0002 /* Channel Direction (W/R*) */
-#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
-#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
-#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
-#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
-#define RESTART 0x0020 /* DMA Buffer Clear */
-#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
-#define DI_EN 0x0080 /* Data Interrupt Enable */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-#define NDSIZE 0x0900 /* Next Descriptor Size */
-#define DMAFLOW 0x7000 /* Flow Control */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
@@ -1425,13 +1286,6 @@
#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
-#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
-#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
-#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
-
-
/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
/* PPI_CONTROL Masks */
#define PORT_EN 0x0001 /* PPI Port Enable */
@@ -1843,46 +1697,6 @@
#define BNDMODE_CAPT 0x2000 /* boundary capture mode */
#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */
-/* Bit masks for OTP_CONTROL */
-
-#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
-#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */
-#define nFIEN 0x0
-#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */
-#define nFTESTDEC 0x0
-#define FWRTEST 0x2000 /* OTP/Fuse Write Test */
-#define nFWRTEST 0x0
-#define FRDEN 0x4000 /* OTP/Fuse Read Enable */
-#define nFRDEN 0x0
-#define FWREN 0x8000 /* OTP/Fuse Write Enable */
-#define nFWREN 0x0
-
-/* Bit masks for OTP_BEN */
-
-#define FBEN 0xffff /* OTP/Fuse Byte Enable */
-
-/* Bit masks for OTP_STATUS */
-
-#define FCOMP 0x1 /* OTP/Fuse Access Complete */
-#define nFCOMP 0x0
-#define FERROR 0x2 /* OTP/Fuse Access Error */
-#define nFERROR 0x0
-#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */
-#define nMMRGLOAD 0x0
-#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */
-#define nMMRGLOCK 0x0
-#define FPGMEN 0x40 /* OTP/Fuse Program Enable */
-#define nFPGMEN 0x0
-
-/* Bit masks for OTP_TIMING */
-
-#define USECDIV 0xff /* Micro Second Divider */
-#define READACC 0x7f00 /* Read Access Time */
-#define CPUMPRL 0x38000 /* Charge Pump Release Time */
-#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */
-#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */
-#define PGMTIME 0xff000000 /* Program Time */
-
/* Bit masks for SECURE_SYSSWT */
#define EMUDABL 0x1 /* Emulation Disable. */
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 43f43a0..4adceb0 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -166,7 +166,6 @@
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
- .ctl_reg = 0x1000,
.enable_dma = 1, /* use dma transfer with this chip*/
.bits_per_word = 16,
};
@@ -174,7 +173,6 @@
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .ctl_reg = 0x1000,
.enable_dma = 0,
.bits_per_word = 16,
};
@@ -258,12 +256,6 @@
};
#endif /* spi master and devices */
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
- .name = "bf537-fb",
-};
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index 644be5e..8ec42ba 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -20,6 +20,7 @@
#endif
#include <asm/irq.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -107,20 +108,6 @@
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
-/*
- * CPOL (Clock Polarity)
- * 0 - Active high SCK
- * 1 - Active low SCK
- * CPHA (Clock Phase) Selects transfer format and operation mode
- * 0 - SCLK toggles from middle of the first data bit, slave select
- * pins controlled by hardware.
- * 1 - SCLK toggles from beginning of first data bit, slave select
- * pins controller by user software.
- * .ctl_reg = 0x1c00, * CPOL=1,CPHA=1,Sandisk 1G work
- * NO NO .ctl_reg = 0x1800, * CPOL=1,CPHA=0
- * NO NO .ctl_reg = 0x1400, * CPOL=0,CPHA=1
- */
- .ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */
.enable_dma = 0, /* if 1 - block!!! */
.bits_per_word = 8,
};
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 82f70ef..6d68dcf 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -321,12 +321,6 @@
};
#endif /* spi master and devices */
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
- .name = "bf537-fb",
-};
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 02b328e..e9ff491 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -370,72 +370,6 @@
/* System MMR Register Bits */
/******************************************************************************* */
-/* ********************* PLL AND RESET MASKS ************************ */
-
-/* PLL_CTL Masks */
-#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */
-#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */
-#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define PLL_OFF 0x0002 /* Shut off PLL clocks */
-#define STOPCK_OFF 0x0008 /* Core clock off */
-#define STOPCK 0x0008 /* Core Clock Off */
-#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */
-#if !defined(__ADSPBF538__)
-/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */
-# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
-# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
-#endif
-#define BYPASS 0x0100 /* Bypass the PLL */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
-#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-
-/* PLL_DIV Masks */
-#define SSEL 0x000F /* System Select */
-#define CSEL 0x0030 /* Core Select */
-
-#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
-
-#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */
-#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */
-#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */
-#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */
-/* PLL_DIV Macros */
-#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-
-/* PLL_STAT Masks */
-#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
-#define FULL_ON 0x0002 /* Processor In Full On Mode */
-#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
-#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
-
-/* VR_CTL Masks */
-#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
-#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
-#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
-#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
-
-#define GAIN 0x000C /* Voltage Level Gain */
-#define GAIN_5 0x0000 /* GAIN = 5 */
-#define GAIN_10 0x0004 /* GAIN = 10 */
-#define GAIN_20 0x0008 /* GAIN = 20 */
-#define GAIN_50 0x000C /* GAIN = 50 */
-
-#define VLEV 0x00F0 /* Internal Voltage Level */
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
-#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
-
/* CHIPID Masks */
#define CHIPID_VERSION 0xF0000000
#define CHIPID_FAMILY 0x0FFFF000
@@ -703,54 +637,7 @@
/* ********** DMA CONTROLLER MASKS *********************8 */
-/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */
-#define DMAEN 0x00000001 /* Channel Enable */
-#define WNR 0x00000002 /* Channel Direction (W/R*) */
-#define WDSIZE_8 0x00000000 /* Word Size 8 bits */
-#define WDSIZE_16 0x00000004 /* Word Size 16 bits */
-#define WDSIZE_32 0x00000008 /* Word Size 32 bits */
-#define DMA2D 0x00000010 /* 2D/1D* Mode */
-#define RESTART 0x00000020 /* Restart */
-#define DI_SEL 0x00000040 /* Data Interrupt Select */
-#define DI_EN 0x00000080 /* Data Interrupt Enable */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-#define NDSIZE 0x00000900 /* Next Descriptor Size */
-#define DMAFLOW 0x00007000 /* Flow Control */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
-
-#define DMAEN_P 0 /* Channel Enable */
-#define WNR_P 1 /* Channel Direction (W/R*) */
-#define DMA2D_P 4 /* 2D/1D* Mode */
-#define RESTART_P 5 /* Restart */
-#define DI_SEL_P 6 /* Data Interrupt Select */
-#define DI_EN_P 7 /* Data Interrupt Enable */
-
-/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-
-#define DMA_DONE 0x00000001 /* DMA Done Indicator */
-#define DMA_ERR 0x00000002 /* DMA Error Indicator */
-#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */
-#define DMA_RUN 0x00000008 /* DMA Running Indicator */
-
-#define DMA_DONE_P 0 /* DMA Done Indicator */
-#define DMA_ERR_P 1 /* DMA Error Indicator */
-#define DFETCH_P 2 /* Descriptor Fetch Indicator */
-#define DMA_RUN_P 3 /* DMA Running Indicator */
-
-/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE 0x00000040 /* DMA Channel Type Indicator */
#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 9ba2904..4e0afda 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -13,9 +13,6 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
@@ -147,45 +144,6 @@
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
- {
- .start = 0x20360000,
- .end = 0x20360000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20360004,
- .end = 0x20360004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
- .sel15Kres = 1,
- .clknotstop = 0,
- .oc_enable = 0,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_connected = 0,
- .no_power_switching = 1,
- .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
- .name = "isp1362-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1362_priv,
- },
- .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
- .resource = isp1362_hcd_resources,
-};
-#endif
-
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
@@ -492,10 +450,6 @@
&sl811_hcd_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
- &isp1362_hcd_device,
-#endif
-
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index c46baa5..ac9b52e 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -9,6 +9,7 @@
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
@@ -25,6 +26,8 @@
#include <linux/i2c.h>
#include <linux/usb/sl811.h>
#include <linux/spi/mmc_spi.h>
+#include <linux/leds.h>
+#include <linux/input.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
@@ -65,7 +68,7 @@
};
static struct platform_device bfin_isp1760_device = {
- .name = "isp1760-hcd",
+ .name = "isp1760",
.id = 0,
.dev = {
.platform_data = &isp1760_priv,
@@ -76,7 +79,6 @@
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-#include <linux/input.h>
#include <linux/gpio_keys.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
@@ -195,28 +197,6 @@
};
#endif
-#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
-static struct resource ax88180_resources[] = {
- [0] = {
- .start = 0x20300000,
- .end = 0x20300000 + 0x8000,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PF7,
- .end = IRQ_PF7,
- .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
- },
-};
-
-static struct platform_device ax88180_device = {
- .name = "ax88180",
- .id = -1,
- .num_resources = ARRAY_SIZE(ax88180_resources),
- .resource = ax88180_resources,
-};
-#endif
-
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
static struct resource sl811_hcd_resources[] = {
{
@@ -272,8 +252,8 @@
.end = 0x20360004,
.flags = IORESOURCE_MEM,
}, {
- .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+ .start = IRQ_PF3,
+ .end = IRQ_PF3,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
@@ -300,6 +280,44 @@
};
#endif
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+unsigned short bfin_can_peripherals[] = {
+ P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+ {
+ .start = 0xFFC02A00,
+ .end = 0xFFC02FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CAN_RX,
+ .end = IRQ_CAN_RX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CAN_TX,
+ .end = IRQ_CAN_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CAN_ERROR,
+ .end = IRQ_CAN_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_can_device = {
+ .name = "bfin_can",
+ .num_resources = ARRAY_SIZE(bfin_can_resources),
+ .resource = bfin_can_resources,
+ .dev = {
+ .platform_data = &bfin_can_peripherals, /* Passed to driver */
+ },
+};
+#endif
+
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
@@ -514,15 +532,14 @@
};
#endif
-#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
-#include <linux/input.h>
+#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
#include <linux/input/ad714x.h>
static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
-static struct ad714x_slider_plat slider_plat[] = {
+static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
{
.start_stage = 0,
.end_stage = 7,
@@ -530,7 +547,7 @@
},
};
-static struct ad714x_button_plat button_plat[] = {
+static struct ad714x_button_plat ad7147_spi_button_plat[] = {
{
.keycode = BTN_FORWARD,
.l_mask = 0,
@@ -557,11 +574,11 @@
.h_mask = 0x400,
},
};
-static struct ad714x_platform_data ad7147_platfrom_data = {
+static struct ad714x_platform_data ad7147_spi_platform_data = {
.slider_num = 1,
.button_num = 5,
- .slider = slider_plat,
- .button = button_plat,
+ .slider = ad7147_spi_slider_plat,
+ .button = ad7147_spi_button_plat,
.stage_cfg_reg = {
{0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
{0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
@@ -580,10 +597,9 @@
};
#endif
-#if defined(CONFIG_INPUT_EVAL_AD7142EB)
-#include <linux/input.h>
+#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
#include <linux/input/ad714x.h>
-static struct ad714x_button_plat button_plat[] = {
+static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
{
.keycode = BTN_1,
.l_mask = 0,
@@ -605,9 +621,9 @@
.h_mask = 0x8,
},
};
-static struct ad714x_platform_data ad7142_platfrom_data = {
+static struct ad714x_platform_data ad7142_i2c_platform_data = {
.button_num = 4,
- .button = button_plat,
+ .button = ad7142_i2c_button_plat,
.stage_cfg_reg = {
/* fixme: figure out right setting for all comoponent according
* to hardware feature of EVAL-AD7142EB board */
@@ -696,8 +712,7 @@
#endif
#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
-#include <linux/input.h>
-#include <linux/spi/adxl34x.h>
+#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
.x_axis_offset = 0,
.y_axis_offset = 0,
@@ -721,9 +736,7 @@
.ev_code_y = ABS_Y, /* EV_REL */
.ev_code_z = ABS_Z, /* EV_REL */
- .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */
- .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */
- .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */
+ .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
/* .ev_code_ff = KEY_F,*/ /* EV_KEY */
/* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
@@ -761,6 +774,47 @@
};
#endif
+#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
+static struct bfin5xx_spi_chip adf7021_spi_chip_info = {
+ .bits_per_word = 16,
+ .cs_gpio = GPIO_PF10,
+};
+
+#include <linux/spi/adf702x.h>
+#define TXREG 0x0160A470
+static const u32 adf7021_regs[] = {
+ 0x09608FA0,
+ 0x00575011,
+ 0x00A7F092,
+ 0x2B141563,
+ 0x81F29E94,
+ 0x00003155,
+ 0x050A4F66,
+ 0x00000007,
+ 0x00000008,
+ 0x000231E9,
+ 0x3296354A,
+ 0x891A2B3B,
+ 0x00000D9C,
+ 0x0000000D,
+ 0x0000000E,
+ 0x0000000F,
+};
+
+static struct adf702x_platform_data adf7021_platform_data = {
+ .regs_base = (void *)SPORT1_TCR1,
+ .dma_ch_rx = CH_SPORT1_RX,
+ .dma_ch_tx = CH_SPORT1_TX,
+ .irq_sport_err = IRQ_SPORT1_ERROR,
+ .gpio_int_rfs = GPIO_PF8,
+ .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
+ P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
+ .adf702x_model = MODEL_ADF7021,
+ .adf702x_regs = adf7021_regs,
+ .tx_reg = TXREG,
+};
+#endif
+
#if defined(CONFIG_MTD_DATAFLASH) \
|| defined(CONFIG_MTD_DATAFLASH_MODULE)
@@ -794,6 +848,13 @@
};
#endif
+#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -855,7 +916,7 @@
},
#endif
-#if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
+#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
{
.modalias = "ad714x_captouch",
.max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
@@ -863,7 +924,7 @@
.bus_num = 0,
.chip_select = 5,
.mode = SPI_MODE_3,
- .platform_data = &ad7147_platfrom_data,
+ .platform_data = &ad7147_spi_platform_data,
.controller_data = &ad7147_spi_chip_info,
},
#endif
@@ -932,6 +993,30 @@
.mode = SPI_MODE_0,
},
#endif
+#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
+ {
+ .modalias = "adxl34x",
+ .platform_data = &adxl34x_info,
+ .irq = IRQ_PF6,
+ .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 2,
+ .controller_data = &spi_adxl34x_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
+ {
+ .modalias = "adf702x",
+ .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 0, /* GPIO controlled SSEL */
+ .controller_data = &adf7021_spi_chip_info,
+ .platform_data = &adf7021_platform_data,
+ .mode = SPI_MODE_0,
+ },
+#endif
+
};
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -1175,7 +1260,6 @@
#endif
#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
-#include <linux/input.h>
#include <linux/i2c/adp5588.h>
static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
[0] = KEY_GRAVE,
@@ -1268,35 +1352,33 @@
* ADP5520/5501 Backlight Data
*/
-static struct adp5520_backlight_platfrom_data adp5520_backlight_data = {
- .fade_in = FADE_T_1200ms,
- .fade_out = FADE_T_1200ms,
- .fade_led_law = BL_LAW_LINEAR,
- .en_ambl_sens = 1,
- .abml_filt = BL_AMBL_FILT_640ms,
- .l1_daylight_max = BL_CUR_mA(15),
- .l1_daylight_dim = BL_CUR_mA(0),
- .l2_office_max = BL_CUR_mA(7),
- .l2_office_dim = BL_CUR_mA(0),
- .l3_dark_max = BL_CUR_mA(3),
- .l3_dark_dim = BL_CUR_mA(0),
- .l2_trip = L2_COMP_CURR_uA(700),
- .l2_hyst = L2_COMP_CURR_uA(50),
- .l3_trip = L3_COMP_CURR_uA(80),
- .l3_hyst = L3_COMP_CURR_uA(20),
+static struct adp5520_backlight_platform_data adp5520_backlight_data = {
+ .fade_in = ADP5520_FADE_T_1200ms,
+ .fade_out = ADP5520_FADE_T_1200ms,
+ .fade_led_law = ADP5520_BL_LAW_LINEAR,
+ .en_ambl_sens = 1,
+ .abml_filt = ADP5520_BL_AMBL_FILT_640ms,
+ .l1_daylight_max = ADP5520_BL_CUR_mA(15),
+ .l1_daylight_dim = ADP5520_BL_CUR_mA(0),
+ .l2_office_max = ADP5520_BL_CUR_mA(7),
+ .l2_office_dim = ADP5520_BL_CUR_mA(0),
+ .l3_dark_max = ADP5520_BL_CUR_mA(3),
+ .l3_dark_dim = ADP5520_BL_CUR_mA(0),
+ .l2_trip = ADP5520_L2_COMP_CURR_uA(700),
+ .l2_hyst = ADP5520_L2_COMP_CURR_uA(50),
+ .l3_trip = ADP5520_L3_COMP_CURR_uA(80),
+ .l3_hyst = ADP5520_L3_COMP_CURR_uA(20),
};
/*
* ADP5520/5501 LEDs Data
*/
-#include <linux/leds.h>
-
static struct led_info adp5520_leds[] = {
{
.name = "adp5520-led1",
.default_trigger = "none",
- .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms,
+ .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
},
#ifdef ADP5520_EN_ALL_LEDS
{
@@ -1312,51 +1394,50 @@
#endif
};
-static struct adp5520_leds_platfrom_data adp5520_leds_data = {
+static struct adp5520_leds_platform_data adp5520_leds_data = {
.num_leds = ARRAY_SIZE(adp5520_leds),
.leds = adp5520_leds,
- .fade_in = FADE_T_600ms,
- .fade_out = FADE_T_600ms,
- .led_on_time = LED_ONT_600ms,
+ .fade_in = ADP5520_FADE_T_600ms,
+ .fade_out = ADP5520_FADE_T_600ms,
+ .led_on_time = ADP5520_LED_ONT_600ms,
};
/*
* ADP5520 GPIO Data
*/
-static struct adp5520_gpio_platfrom_data adp5520_gpio_data = {
+static struct adp5520_gpio_platform_data adp5520_gpio_data = {
.gpio_start = 50,
- .gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
- .gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
+ .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
+ .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
};
/*
* ADP5520 Keypad Data
*/
-#include <linux/input.h>
static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
- [KEY(0, 0)] = KEY_GRAVE,
- [KEY(0, 1)] = KEY_1,
- [KEY(0, 2)] = KEY_2,
- [KEY(0, 3)] = KEY_3,
- [KEY(1, 0)] = KEY_4,
- [KEY(1, 1)] = KEY_5,
- [KEY(1, 2)] = KEY_6,
- [KEY(1, 3)] = KEY_7,
- [KEY(2, 0)] = KEY_8,
- [KEY(2, 1)] = KEY_9,
- [KEY(2, 2)] = KEY_0,
- [KEY(2, 3)] = KEY_MINUS,
- [KEY(3, 0)] = KEY_EQUAL,
- [KEY(3, 1)] = KEY_BACKSLASH,
- [KEY(3, 2)] = KEY_BACKSPACE,
- [KEY(3, 3)] = KEY_ENTER,
+ [ADP5520_KEY(0, 0)] = KEY_GRAVE,
+ [ADP5520_KEY(0, 1)] = KEY_1,
+ [ADP5520_KEY(0, 2)] = KEY_2,
+ [ADP5520_KEY(0, 3)] = KEY_3,
+ [ADP5520_KEY(1, 0)] = KEY_4,
+ [ADP5520_KEY(1, 1)] = KEY_5,
+ [ADP5520_KEY(1, 2)] = KEY_6,
+ [ADP5520_KEY(1, 3)] = KEY_7,
+ [ADP5520_KEY(2, 0)] = KEY_8,
+ [ADP5520_KEY(2, 1)] = KEY_9,
+ [ADP5520_KEY(2, 2)] = KEY_0,
+ [ADP5520_KEY(2, 3)] = KEY_MINUS,
+ [ADP5520_KEY(3, 0)] = KEY_EQUAL,
+ [ADP5520_KEY(3, 1)] = KEY_BACKSLASH,
+ [ADP5520_KEY(3, 2)] = KEY_BACKSPACE,
+ [ADP5520_KEY(3, 3)] = KEY_ENTER,
};
-static struct adp5520_keys_platfrom_data adp5520_keys_data = {
- .rows_en_mask = ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0,
- .cols_en_mask = COL_C3 | COL_C2 | COL_C1 | COL_C0,
+static struct adp5520_keys_platform_data adp5520_keys_data = {
+ .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
+ .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
.keymap = adp5520_keymap,
.keymapsize = ARRAY_SIZE(adp5520_keymap),
.repeat = 0,
@@ -1366,50 +1447,81 @@
* ADP5520/5501 Multifuction Device Init Data
*/
-static struct adp5520_subdev_info adp5520_subdevs[] = {
- {
- .name = "adp5520-backlight",
- .id = ID_ADP5520,
- .platform_data = &adp5520_backlight_data,
- },
- {
- .name = "adp5520-led",
- .id = ID_ADP5520,
- .platform_data = &adp5520_leds_data,
- },
- {
- .name = "adp5520-gpio",
- .id = ID_ADP5520,
- .platform_data = &adp5520_gpio_data,
- },
- {
- .name = "adp5520-keys",
- .id = ID_ADP5520,
- .platform_data = &adp5520_keys_data,
- },
-};
-
static struct adp5520_platform_data adp5520_pdev_data = {
- .num_subdevs = ARRAY_SIZE(adp5520_subdevs),
- .subdevs = adp5520_subdevs,
+ .backlight = &adp5520_backlight_data,
+ .leds = &adp5520_leds_data,
+ .gpio = &adp5520_gpio_data,
+ .keys = &adp5520_keys_data,
};
#endif
#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
#include <linux/i2c/adp5588.h>
-static struct adp5588_gpio_platfrom_data adp5588_gpio_data = {
+static struct adp5588_gpio_platform_data adp5588_gpio_data = {
.gpio_start = 50,
.pullup_dis_mask = 0,
};
#endif
+#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
+#include <linux/i2c/adp8870.h>
+static struct led_info adp8870_leds[] = {
+ {
+ .name = "adp8870-led7",
+ .default_trigger = "none",
+ .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
+ },
+};
+
+
+static struct adp8870_backlight_platform_data adp8870_pdata = {
+ .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
+ ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */
+ .pwm_assign = 0, /* 1 = Enables PWM mode */
+
+ .bl_fade_in = ADP8870_FADE_T_1200ms, /* Backlight Fade-In Timer */
+ .bl_fade_out = ADP8870_FADE_T_1200ms, /* Backlight Fade-Out Timer */
+ .bl_fade_law = ADP8870_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */
+
+ .en_ambl_sens = 1, /* 1 = enable ambient light sensor */
+ .abml_filt = ADP8870_BL_AMBL_FILT_320ms, /* Light sensor filter time */
+
+ .l1_daylight_max = ADP8870_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l1_daylight_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l2_bright_max = ADP8870_BL_CUR_mA(14), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l2_bright_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l3_office_max = ADP8870_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l3_office_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l4_indoor_max = ADP8870_BL_CUR_mA(3), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l4_indor_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l5_dark_max = ADP8870_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
+ .l5_dark_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
+
+ .l2_trip = ADP8870_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ .l2_hyst = ADP8870_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
+ .l3_trip = ADP8870_L3_COMP_CURR_uA(389), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ .l3_hyst = ADP8870_L3_COMP_CURR_uA(54), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
+ .l4_trip = ADP8870_L4_COMP_CURR_uA(167), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+ .l4_hyst = ADP8870_L4_COMP_CURR_uA(16), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
+ .l5_trip = ADP8870_L5_COMP_CURR_uA(43), /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+ .l5_hyst = ADP8870_L5_COMP_CURR_uA(11), /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
+
+ .leds = adp8870_leds,
+ .num_leds = ARRAY_SIZE(adp8870_leds),
+ .led_fade_law = ADP8870_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */
+ .led_fade_in = ADP8870_FADE_T_600ms,
+ .led_fade_out = ADP8870_FADE_T_600ms,
+ .led_on_time = ADP8870_LED_ONT_200ms,
+};
+#endif
+
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_INPUT_EVAL_AD7142EB)
+#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
{
I2C_BOARD_INFO("ad7142_captouch", 0x2C),
.irq = IRQ_PG5,
- .platform_data = (void *)&ad7142_platfrom_data,
+ .platform_data = (void *)&ad7142_i2c_platform_data,
},
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
@@ -1462,6 +1574,32 @@
I2C_BOARD_INFO("bfin-adv7393", 0x2B),
},
#endif
+#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
+ {
+ I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2C),
+ },
+#endif
+#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
+ {
+ I2C_BOARD_INFO("adp8870", 0x2B),
+ .platform_data = (void *)&adp8870_pdata,
+ },
+#endif
+#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
+ {
+ I2C_BOARD_INFO("adau1371", 0x1A),
+ },
+#endif
+#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
+ {
+ I2C_BOARD_INFO("adau1761", 0x38),
+ },
+#endif
+#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
+ {
+ I2C_BOARD_INFO("ad5258", 0x18),
+ },
+#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
@@ -1602,8 +1740,8 @@
&dm9000_device,
#endif
-#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
- &ax88180_device,
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+ &bfin_can_device,
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h
index 17fab44..8b29141 100644
--- a/arch/blackfin/mach-bf537/include/mach/bf537.h
+++ b/arch/blackfin/mach-bf537/include/mach/bf537.h
@@ -9,16 +9,6 @@
#ifndef __MACH_BF537_H__
#define __MACH_BF537_H__
-/* Masks for generic ERROR IRQ demultiplexing used in int-priority-sc.c */
-
-#define SPI_ERR_MASK (TXCOL | RBSY | MODF | TXE) /* SPI_STAT */
-#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORTx_STAT */
-#define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */
-#define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */
-#define UART_ERR_MASK_STAT1 (0x4) /* UARTx_IIR */
-#define UART_ERR_MASK_STAT0 (0x2) /* UARTx_IIR */
-#define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */
-
#define OFFSET_(x) ((x) & 0x0000FFFF)
/*some misc defines*/
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index eab006d..a12d4b6 100644
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -40,10 +40,4 @@
#define OFFSET_SCR 0x1C /* SCR Scratch Register */
#define OFFSET_GCTL 0x24 /* Global Control Register */
-/* PLL_DIV Masks */
-#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
-#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
-#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */
-#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */
-
#endif
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index a6d20ca..066d5c2 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -958,67 +958,6 @@
** modifier UNLESS the lower order bits are saved and ORed back in when
** the macro is used.
*************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks */
-#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define PLL_OFF 0x0002 /* PLL Not Powered */
-#define STOPCK 0x0008 /* Core Clock Off */
-#define PDWN 0x0020 /* Enter Deep Sleep Mode */
-#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
-#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
-#define BYPASS 0x0100 /* Bypass the PLL */
-#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
-#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-
-/* PLL_DIV Masks */
-#define SSEL 0x000F /* System Select */
-#define CSEL 0x0030 /* Core Select */
-#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
-#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
-#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
-#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
-/* PLL_DIV Macros */
-#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-
-/* VR_CTL Masks */
-#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
-#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
-#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
-#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
-
-#define GAIN 0x000C /* Voltage Level Gain */
-#define GAIN_5 0x0000 /* GAIN = 5 */
-#define GAIN_10 0x0004 /* GAIN = 10 */
-#define GAIN_20 0x0008 /* GAIN = 20 */
-#define GAIN_50 0x000C /* GAIN = 50 */
-
-#define VLEV 0x00F0 /* Internal Voltage Level */
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
-#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */
-#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
-#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
-#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
-#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */
-
-/* PLL_STAT Masks */
-#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
-#define FULL_ON 0x0002 /* Processor In Full On Mode */
-#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
-#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
/* CHIPID Masks */
#define CHIPID_VERSION 0xF0000000
@@ -1645,34 +1584,6 @@
#define BGSTAT 0x0020 /* Bus Grant Status */
/* ************************** DMA CONTROLLER MASKS ********************************/
-/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
-#define DMAEN 0x0001 /* DMA Channel Enable */
-#define WNR 0x0002 /* Channel Direction (W/R*) */
-#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
-#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
-#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
-#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
-#define RESTART 0x0020 /* DMA Buffer Clear */
-#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
-#define DI_EN 0x0080 /* Data Interrupt Enable */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-#define NDSIZE 0x0900 /* Next Descriptor Size */
-
-#define DMAFLOW 0x7000 /* Flow Control */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
@@ -1690,12 +1601,6 @@
#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
-#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
-#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
-#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
-
/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
/* PPI_CONTROL Masks */
#define PORT_EN 0x0001 /* PPI Port Enable */
diff --git a/arch/blackfin/mach-bf538/Makefile b/arch/blackfin/mach-bf538/Makefile
index 8cd2719..c0be54f 100644
--- a/arch/blackfin/mach-bf538/Makefile
+++ b/arch/blackfin/mach-bf538/Makefile
@@ -3,3 +3,4 @@
#
obj-y := ints-priority.o dma.o
+obj-$(CONFIG_GPIOLIB) += ext-gpio.o
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index 14af5c2..c296bb1 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -151,6 +151,44 @@
#endif
#endif
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+unsigned short bfin_can_peripherals[] = {
+ P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+ {
+ .start = 0xFFC02A00,
+ .end = 0xFFC02FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CAN_RX,
+ .end = IRQ_CAN_RX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CAN_TX,
+ .end = IRQ_CAN_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CAN_ERROR,
+ .end = IRQ_CAN_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_can_device = {
+ .name = "bfin_can",
+ .num_resources = ARRAY_SIZE(bfin_can_resources),
+ .resource = bfin_can_resources,
+ .dev = {
+ .platform_data = &bfin_can_peripherals, /* Passed to driver */
+ },
+};
+#endif
+
/*
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
@@ -610,6 +648,10 @@
#endif
#endif
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+ &bfin_can_device,
+#endif
+
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
diff --git a/arch/blackfin/mach-bf538/ext-gpio.c b/arch/blackfin/mach-bf538/ext-gpio.c
new file mode 100644
index 0000000..180b125
--- /dev/null
+++ b/arch/blackfin/mach-bf538/ext-gpio.c
@@ -0,0 +1,123 @@
+/*
+ * GPIOLIB interface for BF538/9 PORT C, D, and E GPIOs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
+
+#define DEFINE_REG(reg, off) \
+static inline u16 read_##reg(void __iomem *port) \
+ { return bfin_read16(port + off); } \
+static inline void write_##reg(void __iomem *port, u16 v) \
+ { bfin_write16(port + off, v); }
+
+DEFINE_REG(PORTIO, 0x00)
+DEFINE_REG(PORTIO_CLEAR, 0x10)
+DEFINE_REG(PORTIO_SET, 0x20)
+DEFINE_REG(PORTIO_DIR, 0x40)
+DEFINE_REG(PORTIO_INEN, 0x50)
+
+static void __iomem *gpio_chip_to_mmr(struct gpio_chip *chip)
+{
+ switch (chip->base) {
+ default: /* not really needed, but keeps gcc happy */
+ case GPIO_PC0: return (void __iomem *)PORTCIO;
+ case GPIO_PD0: return (void __iomem *)PORTDIO;
+ case GPIO_PE0: return (void __iomem *)PORTEIO;
+ }
+}
+
+static int bf538_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+ void __iomem *port = gpio_chip_to_mmr(chip);
+ return !!(read_PORTIO(port) & (1u << gpio));
+}
+
+static void bf538_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ void __iomem *port = gpio_chip_to_mmr(chip);
+ if (value)
+ write_PORTIO_SET(port, (1u << gpio));
+ else
+ write_PORTIO_CLEAR(port, (1u << gpio));
+}
+
+static int bf538_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+ void __iomem *port = gpio_chip_to_mmr(chip);
+ write_PORTIO_DIR(port, read_PORTIO_DIR(port) & ~(1u << gpio));
+ write_PORTIO_INEN(port, read_PORTIO_INEN(port) | (1u << gpio));
+ return 0;
+}
+
+static int bf538_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value)
+{
+ void __iomem *port = gpio_chip_to_mmr(chip);
+ write_PORTIO_INEN(port, read_PORTIO_INEN(port) & ~(1u << gpio));
+ bf538_gpio_set_value(port, gpio, value);
+ write_PORTIO_DIR(port, read_PORTIO_DIR(port) | (1u << gpio));
+ return 0;
+}
+
+static int bf538_gpio_request(struct gpio_chip *chip, unsigned gpio)
+{
+ return bfin_special_gpio_request(chip->base + gpio, chip->label);
+}
+
+static void bf538_gpio_free(struct gpio_chip *chip, unsigned gpio)
+{
+ return bfin_special_gpio_free(chip->base + gpio);
+}
+
+/* We don't set the irq fields as these banks cannot generate interrupts */
+
+static struct gpio_chip bf538_portc_chip = {
+ .label = "GPIO-PC",
+ .direction_input = bf538_gpio_direction_input,
+ .get = bf538_gpio_get_value,
+ .direction_output = bf538_gpio_direction_output,
+ .set = bf538_gpio_set_value,
+ .request = bf538_gpio_request,
+ .free = bf538_gpio_free,
+ .base = GPIO_PC0,
+ .ngpio = GPIO_PC9 - GPIO_PC0 + 1,
+};
+
+static struct gpio_chip bf538_portd_chip = {
+ .label = "GPIO-PD",
+ .direction_input = bf538_gpio_direction_input,
+ .get = bf538_gpio_get_value,
+ .direction_output = bf538_gpio_direction_output,
+ .set = bf538_gpio_set_value,
+ .request = bf538_gpio_request,
+ .free = bf538_gpio_free,
+ .base = GPIO_PD0,
+ .ngpio = GPIO_PD13 - GPIO_PD0 + 1,
+};
+
+static struct gpio_chip bf538_porte_chip = {
+ .label = "GPIO-PE",
+ .direction_input = bf538_gpio_direction_input,
+ .get = bf538_gpio_get_value,
+ .direction_output = bf538_gpio_direction_output,
+ .set = bf538_gpio_set_value,
+ .request = bf538_gpio_request,
+ .free = bf538_gpio_free,
+ .base = GPIO_PE0,
+ .ngpio = GPIO_PE15 - GPIO_PE0 + 1,
+};
+
+static int __init bf538_extgpio_setup(void)
+{
+ return gpiochip_add(&bf538_portc_chip) |
+ gpiochip_add(&bf538_portd_chip) |
+ gpiochip_add(&bf538_porte_chip);
+}
+arch_initcall(bf538_extgpio_setup);
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 278e894..08b5eab 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -37,10 +37,4 @@
#define OFFSET_SCR 0x1C /* SCR Scratch Register */
#define OFFSET_GCTL 0x24 /* Global Control Register */
-/* PLL_DIV Masks */
-#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
-#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
-#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */
-#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */
-
#endif
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 5f6c34d..fac563e 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -468,31 +468,31 @@
/* General-Purpose Ports (0xFFC01500 - 0xFFC015FF) */
/* GPIO Port C Register Names */
-#define GPIO_C_CNFG 0xFFC01500 /* GPIO Pin Port C Configuration Register */
-#define GPIO_C_D 0xFFC01510 /* GPIO Pin Port C Data Register */
-#define GPIO_C_C 0xFFC01520 /* Clear GPIO Pin Port C Register */
-#define GPIO_C_S 0xFFC01530 /* Set GPIO Pin Port C Register */
-#define GPIO_C_T 0xFFC01540 /* Toggle GPIO Pin Port C Register */
-#define GPIO_C_DIR 0xFFC01550 /* GPIO Pin Port C Direction Register */
-#define GPIO_C_INEN 0xFFC01560 /* GPIO Pin Port C Input Enable Register */
+#define PORTCIO_FER 0xFFC01500 /* GPIO Pin Port C Configuration Register */
+#define PORTCIO 0xFFC01510 /* GPIO Pin Port C Data Register */
+#define PORTCIO_CLEAR 0xFFC01520 /* Clear GPIO Pin Port C Register */
+#define PORTCIO_SET 0xFFC01530 /* Set GPIO Pin Port C Register */
+#define PORTCIO_TOGGLE 0xFFC01540 /* Toggle GPIO Pin Port C Register */
+#define PORTCIO_DIR 0xFFC01550 /* GPIO Pin Port C Direction Register */
+#define PORTCIO_INEN 0xFFC01560 /* GPIO Pin Port C Input Enable Register */
/* GPIO Port D Register Names */
-#define GPIO_D_CNFG 0xFFC01504 /* GPIO Pin Port D Configuration Register */
-#define GPIO_D_D 0xFFC01514 /* GPIO Pin Port D Data Register */
-#define GPIO_D_C 0xFFC01524 /* Clear GPIO Pin Port D Register */
-#define GPIO_D_S 0xFFC01534 /* Set GPIO Pin Port D Register */
-#define GPIO_D_T 0xFFC01544 /* Toggle GPIO Pin Port D Register */
-#define GPIO_D_DIR 0xFFC01554 /* GPIO Pin Port D Direction Register */
-#define GPIO_D_INEN 0xFFC01564 /* GPIO Pin Port D Input Enable Register */
+#define PORTDIO_FER 0xFFC01504 /* GPIO Pin Port D Configuration Register */
+#define PORTDIO 0xFFC01514 /* GPIO Pin Port D Data Register */
+#define PORTDIO_CLEAR 0xFFC01524 /* Clear GPIO Pin Port D Register */
+#define PORTDIO_SET 0xFFC01534 /* Set GPIO Pin Port D Register */
+#define PORTDIO_TOGGLE 0xFFC01544 /* Toggle GPIO Pin Port D Register */
+#define PORTDIO_DIR 0xFFC01554 /* GPIO Pin Port D Direction Register */
+#define PORTDIO_INEN 0xFFC01564 /* GPIO Pin Port D Input Enable Register */
/* GPIO Port E Register Names */
-#define GPIO_E_CNFG 0xFFC01508 /* GPIO Pin Port E Configuration Register */
-#define GPIO_E_D 0xFFC01518 /* GPIO Pin Port E Data Register */
-#define GPIO_E_C 0xFFC01528 /* Clear GPIO Pin Port E Register */
-#define GPIO_E_S 0xFFC01538 /* Set GPIO Pin Port E Register */
-#define GPIO_E_T 0xFFC01548 /* Toggle GPIO Pin Port E Register */
-#define GPIO_E_DIR 0xFFC01558 /* GPIO Pin Port E Direction Register */
-#define GPIO_E_INEN 0xFFC01568 /* GPIO Pin Port E Input Enable Register */
+#define PORTEIO_FER 0xFFC01508 /* GPIO Pin Port E Configuration Register */
+#define PORTEIO 0xFFC01518 /* GPIO Pin Port E Data Register */
+#define PORTEIO_CLEAR 0xFFC01528 /* Clear GPIO Pin Port E Register */
+#define PORTEIO_SET 0xFFC01538 /* Set GPIO Pin Port E Register */
+#define PORTEIO_TOGGLE 0xFFC01548 /* Toggle GPIO Pin Port E Register */
+#define PORTEIO_DIR 0xFFC01558 /* GPIO Pin Port E Direction Register */
+#define PORTEIO_INEN 0xFFC01568 /* GPIO Pin Port E Input Enable Register */
/* DMA Controller 1 Traffic Control Registers (0xFFC01B00 - 0xFFC01BFF) */
@@ -1422,81 +1422,6 @@
/* System MMR Register Bits and Macros */
/******************************************************************************* */
-/* ********************* PLL AND RESET MASKS ************************ */
-/* PLL_CTL Masks */
-#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */
-#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */
-#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define PLL_OFF 0x0002 /* Shut off PLL clocks */
-
-#define STOPCK 0x0008 /* Core Clock Off */
-#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */
-#define IN_DELAY 0x0014 /* EBIU Input Delay Select */
-#define OUT_DELAY 0x00C0 /* EBIU Output Delay Select */
-#define BYPASS 0x0100 /* Bypass the PLL */
-#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
-
-/* PLL_CTL Macros */
-#ifdef _MISRA_RULES
-#define SET_MSEL(x) (((x)&0x3Fu) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-#define SET_OUT_DELAY(x) (((x)&0x03u) << 0x6)
-#define SET_IN_DELAY(x) ((((x)&0x02u) << 0x3) | (((x)&0x01u) << 0x2))
-#else
-#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-#define SET_OUT_DELAY(x) (((x)&0x03) << 0x6)
-#define SET_IN_DELAY(x) ((((x)&0x02) << 0x3) | (((x)&0x01) << 0x2))
-#endif /* _MISRA_RULES */
-
-/* PLL_DIV Masks */
-#define SSEL 0x000F /* System Select */
-#define CSEL 0x0030 /* Core Select */
-#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
-#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
-#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
-#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
-
-#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
-
-/* PLL_DIV Macros */
-#ifdef _MISRA_RULES
-#define SET_SSEL(x) ((x)&0xFu) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-#else
-#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-#endif /* _MISRA_RULES */
-
-/* PLL_STAT Masks */
-#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
-#define FULL_ON 0x0002 /* Processor In Full On Mode */
-#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
-#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
-
-/* VR_CTL Masks */
-#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
-#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
-#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
-#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
-
-#define GAIN 0x000C /* Voltage Level Gain */
-#define GAIN_5 0x0000 /* GAIN = 5 */
-#define GAIN_10 0x0004 /* GAIN = 10 */
-#define GAIN_20 0x0008 /* GAIN = 20 */
-#define GAIN_50 0x000C /* GAIN = 50 */
-
-#define VLEV 0x00F0 /* Internal Voltage Level - Only Program Values Within Specifications */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (See Datasheet for Regulator Tolerance) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (See Datasheet for Regulator Tolerance) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (See Datasheet for Regulator Tolerance) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (See Datasheet for Regulator Tolerance) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (See Datasheet for Regulator Tolerance) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (See Datasheet for Regulator Tolerance) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (See Datasheet for Regulator Tolerance) */
-
-#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */
-#define MXVRWE 0x0400 /* Enable MXVR Wakeup From Hibernate */
-#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
-
/* SWRST Mask */
#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
@@ -1609,91 +1534,6 @@
#endif /* _MISRA_RULES */
-/* ********* WATCHDOG TIMER MASKS ******************** */
-/* Watchdog Timer WDOG_CTL Register Masks */
-#ifdef _MISRA_RULES
-#define WDEV(x) (((x)<<1) & 0x0006u) /* event generated on roll over */
-#else
-#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
-#endif /* _MISRA_RULES */
-#define WDEV_RESET 0x0000 /* generate reset event on roll over */
-#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
-#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
-#define WDEV_NONE 0x0006 /* no event on roll over */
-#define WDEN 0x0FF0 /* enable watchdog */
-#define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */
-
-/* deprecated WDOG_CTL Register Masks for legacy code */
-#define ICTL WDEV
-#define ENABLE_RESET WDEV_RESET
-#define WDOG_RESET WDEV_RESET
-#define ENABLE_NMI WDEV_NMI
-#define WDOG_NMI WDEV_NMI
-#define ENABLE_GPI WDEV_GPI
-#define WDOG_GPI WDEV_GPI
-#define DISABLE_EVT WDEV_NONE
-#define WDOG_NONE WDEV_NONE
-
-#define TMR_EN WDEN
-#define WDOG_DISABLE WDDIS
-#define TRO WDRO
-
-#define ICTL_P0 0x01
-#define ICTL_P1 0x02
-#define TRO_P 0x0F
-
-
-/* *************** REAL TIME CLOCK MASKS **************************/
-/* RTC_STAT and RTC_ALARM register */
-#define RTSEC 0x0000003F /* Real-Time Clock Seconds */
-#define RTMIN 0x00000FC0 /* Real-Time Clock Minutes */
-#define RTHR 0x0001F000 /* Real-Time Clock Hours */
-#define RTDAY 0xFFFE0000 /* Real-Time Clock Days */
-
-/* RTC_ICTL register */
-#define SWIE 0x0001 /* Stopwatch Interrupt Enable */
-#define AIE 0x0002 /* Alarm Interrupt Enable */
-#define SIE 0x0004 /* Seconds (1 Hz) Interrupt Enable */
-#define MIE 0x0008 /* Minutes Interrupt Enable */
-#define HIE 0x0010 /* Hours Interrupt Enable */
-#define DIE 0x0020 /* 24 Hours (Days) Interrupt Enable */
-#define DAIE 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
-#define WCIE 0x8000 /* Write Complete Interrupt Enable */
-
-/* RTC_ISTAT register */
-#define SWEF 0x0001 /* Stopwatch Event Flag */
-#define AEF 0x0002 /* Alarm Event Flag */
-#define SEF 0x0004 /* Seconds (1 Hz) Event Flag */
-#define MEF 0x0008 /* Minutes Event Flag */
-#define HEF 0x0010 /* Hours Event Flag */
-#define DEF 0x0020 /* 24 Hours (Days) Event Flag */
-#define DAEF 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Event Flag */
-#define WPS 0x4000 /* Write Pending Status (RO) */
-#define WCOM 0x8000 /* Write Complete */
-
-/* RTC_FAST Mask (RTC_PREN Mask) */
-#define ENABLE_PRESCALE 0x00000001 /* Enable prescaler so RTC runs at 1 Hz */
-#define PREN 0x00000001
- /* ** Must be set after power-up for proper operation of RTC */
-
-/* Deprecated RTC_STAT and RTC_ALARM Masks */
-#define RTC_SEC RTSEC /* Real-Time Clock Seconds */
-#define RTC_MIN RTMIN /* Real-Time Clock Minutes */
-#define RTC_HR RTHR /* Real-Time Clock Hours */
-#define RTC_DAY RTDAY /* Real-Time Clock Days */
-
-/* Deprecated RTC_ICTL/RTC_ISTAT Masks */
-#define STOPWATCH SWIE /* Stopwatch Interrupt Enable */
-#define ALARM AIE /* Alarm Interrupt Enable */
-#define SECOND SIE /* Seconds (1 Hz) Interrupt Enable */
-#define MINUTE MIE /* Minutes Interrupt Enable */
-#define HOUR HIE /* Hours Interrupt Enable */
-#define DAY DIE /* 24 Hours (Days) Interrupt Enable */
-#define DAY_ALARM DAIE /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
-#define WRITE_COMPLETE WCIE /* Write Complete Interrupt Enable */
-
-
/* ***************************** UART CONTROLLER MASKS ********************** */
/* UARTx_LCR Register */
#ifdef _MISRA_RULES
@@ -1917,52 +1757,6 @@
/* ********** DMA CONTROLLER MASKS ***********************/
-/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
-#define DMAEN 0x0001 /* Channel Enable */
-#define WNR 0x0002 /* Channel Direction (W/R*) */
-#define WDSIZE_8 0x0000 /* Word Size 8 bits */
-#define WDSIZE_16 0x0004 /* Word Size 16 bits */
-#define WDSIZE_32 0x0008 /* Word Size 32 bits */
-#define DMA2D 0x0010 /* 2D/1D* Mode */
-#define RESTART 0x0020 /* Restart */
-#define DI_SEL 0x0040 /* Data Interrupt Select */
-#define DI_EN 0x0080 /* Data Interrupt Enable */
-#define NDSIZE 0x0900 /* Next Descriptor Size */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-
-#define DMAFLOW 0x7000 /* Flow Control */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
-
-#define DMAEN_P 0x0 /* Channel Enable */
-#define WNR_P 0x1 /* Channel Direction (W/R*) */
-#define DMA2D_P 0x4 /* 2D/1D* Mode */
-#define RESTART_P 0x5 /* Restart */
-#define DI_SEL_P 0x6 /* Data Interrupt Select */
-#define DI_EN_P 0x7 /* Data Interrupt Enable */
-
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-#define DMA_DONE 0x0001 /* DMA Done Indicator */
-#define DMA_ERR 0x0002 /* DMA Error Indicator */
-#define DFETCH 0x0004 /* Descriptor Fetch Indicator */
-#define DMA_RUN 0x0008 /* DMA Running Indicator */
-
-#define DMA_DONE_P 0x0 /* DMA Done Indicator */
-#define DMA_ERR_P 0x1 /* DMA Error Indicator */
-#define DFETCH_P 0x2 /* Descriptor Fetch Indicator */
-#define DMA_RUN_P 0x3 /* DMA Running Indicator */
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
@@ -2625,1019 +2419,6 @@
#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
-/********************************* MXVR MASKS ****************************************/
-
-/* MXVR_CONFIG Masks */
-
-#define MXVREN 0x00000001lu
-#define MMSM 0x00000002lu
-#define ACTIVE 0x00000004lu
-#define SDELAY 0x00000008lu
-#define NCMRXEN 0x00000010lu
-#define RWRRXEN 0x00000020lu
-#define MTXEN 0x00000040lu
-#define MTXON 0x00000080lu /*legacy*/
-#define MTXONB 0x00000080lu
-#define EPARITY 0x00000100lu
-#define MSB 0x00001E00lu
-#define APRXEN 0x00002000lu
-#define WAKEUP 0x00004000lu
-#define LMECH 0x00008000lu
-
-#ifdef _MISRA_RULES
-#define SET_MSB(x) (((x)&0xFu) << 0x9)
-#else
-#define SET_MSB(x) (((x)&0xF) << 0x9)
-#endif /* _MISRA_RULES */
-
-
-/* MXVR_PLL_CTL_0 Masks */
-
-#define MXTALCEN 0x00000001lu
-#define MXTALFEN 0x00000002lu
-#define MPLLMS 0x00000008lu
-#define MXTALMUL 0x00000030lu
-#define MPLLEN 0x00000040lu
-#define MPLLEN0 0x00000040lu /* legacy */
-#define MPLLEN1 0x00000080lu /* legacy */
-#define MMCLKEN 0x00000100lu
-#define MMCLKMUL 0x00001E00lu
-#define MPLLRSTB 0x00002000lu
-#define MPLLRSTB0 0x00002000lu /* legacy */
-#define MPLLRSTB1 0x00004000lu /* legacy */
-#define MBCLKEN 0x00010000lu
-#define MBCLKDIV 0x001E0000lu
-#define MPLLCDR 0x00200000lu
-#define MPLLCDR0 0x00200000lu /* legacy */
-#define MPLLCDR1 0x00400000lu /* legacy */
-#define INVRX 0x00800000lu
-#define MFSEN 0x01000000lu
-#define MFSDIV 0x1E000000lu
-#define MFSSEL 0x60000000lu
-#define MFSSYNC 0x80000000lu
-
-#define MXTALMUL_256FS 0x00000000lu /* legacy */
-#define MXTALMUL_384FS 0x00000010lu /* legacy */
-#define MXTALMUL_512FS 0x00000020lu /* legacy */
-#define MXTALMUL_1024FS 0x00000030lu
-
-#define MMCLKMUL_1024FS 0x00000000lu
-#define MMCLKMUL_512FS 0x00000200lu
-#define MMCLKMUL_256FS 0x00000400lu
-#define MMCLKMUL_128FS 0x00000600lu
-#define MMCLKMUL_64FS 0x00000800lu
-#define MMCLKMUL_32FS 0x00000A00lu
-#define MMCLKMUL_16FS 0x00000C00lu
-#define MMCLKMUL_8FS 0x00000E00lu
-#define MMCLKMUL_4FS 0x00001000lu
-#define MMCLKMUL_2FS 0x00001200lu
-#define MMCLKMUL_1FS 0x00001400lu
-#define MMCLKMUL_1536FS 0x00001A00lu
-#define MMCLKMUL_768FS 0x00001C00lu
-#define MMCLKMUL_384FS 0x00001E00lu
-
-#define MBCLKDIV_DIV2 0x00020000lu
-#define MBCLKDIV_DIV4 0x00040000lu
-#define MBCLKDIV_DIV8 0x00060000lu
-#define MBCLKDIV_DIV16 0x00080000lu
-#define MBCLKDIV_DIV32 0x000A0000lu
-#define MBCLKDIV_DIV64 0x000C0000lu
-#define MBCLKDIV_DIV128 0x000E0000lu
-#define MBCLKDIV_DIV256 0x00100000lu
-#define MBCLKDIV_DIV512 0x00120000lu
-#define MBCLKDIV_DIV1024 0x00140000lu
-
-#define MFSDIV_DIV2 0x02000000lu
-#define MFSDIV_DIV4 0x04000000lu
-#define MFSDIV_DIV8 0x06000000lu
-#define MFSDIV_DIV16 0x08000000lu
-#define MFSDIV_DIV32 0x0A000000lu
-#define MFSDIV_DIV64 0x0C000000lu
-#define MFSDIV_DIV128 0x0E000000lu
-#define MFSDIV_DIV256 0x10000000lu
-#define MFSDIV_DIV512 0x12000000lu
-#define MFSDIV_DIV1024 0x14000000lu
-
-#define MFSSEL_CLOCK 0x00000000lu
-#define MFSSEL_PULSE_HI 0x20000000lu
-#define MFSSEL_PULSE_LO 0x40000000lu
-
-
-/* MXVR_PLL_CTL_1 Masks */
-
-#define MSTO 0x00000001lu
-#define MSTO0 0x00000001lu /* legacy */
-#define MHOGGD 0x00000004lu
-#define MHOGGD0 0x00000004lu /* legacy */
-#define MHOGGD1 0x00000008lu /* legacy */
-#define MSHAPEREN 0x00000010lu
-#define MSHAPEREN0 0x00000010lu /* legacy */
-#define MSHAPEREN1 0x00000020lu /* legacy */
-#define MPLLCNTEN 0x00008000lu
-#define MPLLCNT 0xFFFF0000lu
-
-#ifdef _MISRA_RULES
-#define SET_MPLLCNT(x) (((x)&0xFFFFu) << 0x10)
-#else
-#define SET_MPLLCNT(x) (((x)&0xFFFF) << 0x10)
-#endif /* _MISRA_RULES */
-
-
-/* MXVR_PLL_CTL_2 Masks */
-
-#define MSHAPERSEL 0x00000007lu
-#define MCPSEL 0x000000E0lu
-
-/* MXVR_INT_STAT_0 Masks */
-
-#define NI2A 0x00000001lu
-#define NA2I 0x00000002lu
-#define SBU2L 0x00000004lu
-#define SBL2U 0x00000008lu
-#define PRU 0x00000010lu
-#define MPRU 0x00000020lu
-#define DRU 0x00000040lu
-#define MDRU 0x00000080lu
-#define SBU 0x00000100lu
-#define ATU 0x00000200lu
-#define FCZ0 0x00000400lu
-#define FCZ1 0x00000800lu
-#define PERR 0x00001000lu
-#define MH2L 0x00002000lu
-#define ML2H 0x00004000lu
-#define WUP 0x00008000lu
-#define FU2L 0x00010000lu
-#define FL2U 0x00020000lu
-#define BU2L 0x00040000lu
-#define BL2U 0x00080000lu
-#define PCZ 0x00400000lu
-#define FERR 0x00800000lu
-#define CMR 0x01000000lu
-#define CMROF 0x02000000lu
-#define CMTS 0x04000000lu
-#define CMTC 0x08000000lu
-#define RWRC 0x10000000lu
-#define BCZ 0x20000000lu
-#define BMERR 0x40000000lu
-#define DERR 0x80000000lu
-
-
-/* MXVR_INT_EN_0 Masks */
-
-#define NI2AEN NI2A
-#define NA2IEN NA2I
-#define SBU2LEN SBU2L
-#define SBL2UEN SBL2U
-#define PRUEN PRU
-#define MPRUEN MPRU
-#define DRUEN DRU
-#define MDRUEN MDRU
-#define SBUEN SBU
-#define ATUEN ATU
-#define FCZ0EN FCZ0
-#define FCZ1EN FCZ1
-#define PERREN PERR
-#define MH2LEN MH2L
-#define ML2HEN ML2H
-#define WUPEN WUP
-#define FU2LEN FU2L
-#define FL2UEN FL2U
-#define BU2LEN BU2L
-#define BL2UEN BL2U
-#define PCZEN PCZ
-#define FERREN FERR
-#define CMREN CMR
-#define CMROFEN CMROF
-#define CMTSEN CMTS
-#define CMTCEN CMTC
-#define RWRCEN RWRC
-#define BCZEN BCZ
-#define BMERREN BMERR
-#define DERREN DERR
-
-
-/* MXVR_INT_STAT_1 Masks */
-
-#define APR 0x00000004lu
-#define APROF 0x00000008lu
-#define APTS 0x00000040lu
-#define APTC 0x00000080lu
-#define APRCE 0x00000400lu
-#define APRPE 0x00000800lu
-
-#define HDONE0 0x00000001lu
-#define DONE0 0x00000002lu
-#define HDONE1 0x00000010lu
-#define DONE1 0x00000020lu
-#define HDONE2 0x00000100lu
-#define DONE2 0x00000200lu
-#define HDONE3 0x00001000lu
-#define DONE3 0x00002000lu
-#define HDONE4 0x00010000lu
-#define DONE4 0x00020000lu
-#define HDONE5 0x00100000lu
-#define DONE5 0x00200000lu
-#define HDONE6 0x01000000lu
-#define DONE6 0x02000000lu
-#define HDONE7 0x10000000lu
-#define DONE7 0x20000000lu
-
-#define DONEX(x) (0x00000002 << (4 * (x)))
-#define HDONEX(x) (0x00000001 << (4 * (x)))
-
-
-/* MXVR_INT_EN_1 Masks */
-
-#define APREN APR
-#define APROFEN APROF
-#define APTSEN APTS
-#define APTCEN APTC
-#define APRCEEN APRCE
-#define APRPEEN APRPE
-
-#define HDONEEN0 HDONE0
-#define DONEEN0 DONE0
-#define HDONEEN1 HDONE1
-#define DONEEN1 DONE1
-#define HDONEEN2 HDONE2
-#define DONEEN2 DONE2
-#define HDONEEN3 HDONE3
-#define DONEEN3 DONE3
-#define HDONEEN4 HDONE4
-#define DONEEN4 DONE4
-#define HDONEEN5 HDONE5
-#define DONEEN5 DONE5
-#define HDONEEN6 HDONE6
-#define DONEEN6 DONE6
-#define HDONEEN7 HDONE7
-#define DONEEN7 DONE7
-
-#define DONEENX(x) (0x00000002 << (4 * (x)))
-#define HDONEENX(x) (0x00000001 << (4 * (x)))
-
-
-/* MXVR_STATE_0 Masks */
-
-#define NACT 0x00000001lu
-#define SBLOCK 0x00000002lu
-#define PFDLOCK 0x00000004lu
-#define PFDLOCK0 0x00000004lu /* legacy */
-#define PDD 0x00000008lu
-#define PDD0 0x00000008lu /* legacy */
-#define PVCO 0x00000010lu
-#define PVCO0 0x00000010lu /* legacy */
-#define PFDLOCK1 0x00000020lu /* legacy */
-#define PDD1 0x00000040lu /* legacy */
-#define PVCO1 0x00000080lu /* legacy */
-#define APBSY 0x00000100lu
-#define APARB 0x00000200lu
-#define APTX 0x00000400lu
-#define APRX 0x00000800lu
-#define CMBSY 0x00001000lu
-#define CMARB 0x00002000lu
-#define CMTX 0x00004000lu
-#define CMRX 0x00008000lu
-#define MRXONB 0x00010000lu
-#define RGSIP 0x00020000lu
-#define DALIP 0x00040000lu
-#define ALIP 0x00080000lu
-#define RRDIP 0x00100000lu
-#define RWRIP 0x00200000lu
-#define FLOCK 0x00400000lu
-#define BLOCK 0x00800000lu
-#define RSB 0x0F000000lu
-#define DERRNUM 0xF0000000lu
-
-
-/* MXVR_STATE_1 Masks */
-
-#define STXNUMB 0x0000000Flu
-#define SRXNUMB 0x000000F0lu
-#define APCONT 0x00000100lu
-#define DMAACTIVEX 0x00FF0000lu
-#define DMAACTIVE0 0x00010000lu
-#define DMAACTIVE1 0x00020000lu
-#define DMAACTIVE2 0x00040000lu
-#define DMAACTIVE3 0x00080000lu
-#define DMAACTIVE4 0x00100000lu
-#define DMAACTIVE5 0x00200000lu
-#define DMAACTIVE6 0x00400000lu
-#define DMAACTIVE7 0x00800000lu
-#define DMAPMENX 0xFF000000lu
-#define DMAPMEN0 0x01000000lu
-#define DMAPMEN1 0x02000000lu
-#define DMAPMEN2 0x04000000lu
-#define DMAPMEN3 0x08000000lu
-#define DMAPMEN4 0x10000000lu
-#define DMAPMEN5 0x20000000lu
-#define DMAPMEN6 0x40000000lu
-#define DMAPMEN7 0x80000000lu
-
-
-/* MXVR_POSITION Masks */
-
-#define PVALID 0x8000
-#define POSITION 0x003F
-
-
-/* MXVR_MAX_POSITION Masks */
-
-#define MPVALID 0x8000
-#define MPOSITION 0x003F
-
-
-/* MXVR_DELAY Masks */
-
-#define DVALID 0x8000
-#define DELAY 0x003F
-
-
-/* MXVR_MAX_DELAY Masks */
-
-#define MDVALID 0x8000
-#define MDELAY 0x003F
-
-
-/* MXVR_LADDR Masks */
-
-#define LVALID 0x80000000lu
-#define LADDR 0x0000FFFFlu
-
-
-/* MXVR_GADDR Masks */
-
-#define GVALID 0x8000
-#define GADDRL 0x00FF
-
-
-/* MXVR_AADDR Masks */
-
-#define AVALID 0x80000000lu
-#define AADDR 0x0000FFFFlu
-
-
-/* MXVR_ALLOC_0 Masks */
-
-#define CIU0 0x00000080lu
-#define CIU1 0x00008000lu
-#define CIU2 0x00800000lu
-#define CIU3 0x80000000lu
-
-#define CL0 0x0000007Flu
-#define CL1 0x00007F00lu
-#define CL2 0x007F0000lu
-#define CL3 0x7F000000lu
-
-
-/* MXVR_ALLOC_1 Masks */
-
-#define CIU4 0x00000080lu
-#define CIU5 0x00008000lu
-#define CIU6 0x00800000lu
-#define CIU7 0x80000000lu
-
-#define CL4 0x0000007Flu
-#define CL5 0x00007F00lu
-#define CL6 0x007F0000lu
-#define CL7 0x7F000000lu
-
-
-/* MXVR_ALLOC_2 Masks */
-
-#define CIU8 0x00000080lu
-#define CIU9 0x00008000lu
-#define CIU10 0x00800000lu
-#define CIU11 0x80000000lu
-
-#define CL8 0x0000007Flu
-#define CL9 0x00007F00lu
-#define CL10 0x007F0000lu
-#define CL11 0x7F000000lu
-
-
-/* MXVR_ALLOC_3 Masks */
-
-#define CIU12 0x00000080lu
-#define CIU13 0x00008000lu
-#define CIU14 0x00800000lu
-#define CIU15 0x80000000lu
-
-#define CL12 0x0000007Flu
-#define CL13 0x00007F00lu
-#define CL14 0x007F0000lu
-#define CL15 0x7F000000lu
-
-
-/* MXVR_ALLOC_4 Masks */
-
-#define CIU16 0x00000080lu
-#define CIU17 0x00008000lu
-#define CIU18 0x00800000lu
-#define CIU19 0x80000000lu
-
-#define CL16 0x0000007Flu
-#define CL17 0x00007F00lu
-#define CL18 0x007F0000lu
-#define CL19 0x7F000000lu
-
-
-/* MXVR_ALLOC_5 Masks */
-
-#define CIU20 0x00000080lu
-#define CIU21 0x00008000lu
-#define CIU22 0x00800000lu
-#define CIU23 0x80000000lu
-
-#define CL20 0x0000007Flu
-#define CL21 0x00007F00lu
-#define CL22 0x007F0000lu
-#define CL23 0x7F000000lu
-
-
-/* MXVR_ALLOC_6 Masks */
-
-#define CIU24 0x00000080lu
-#define CIU25 0x00008000lu
-#define CIU26 0x00800000lu
-#define CIU27 0x80000000lu
-
-#define CL24 0x0000007Flu
-#define CL25 0x00007F00lu
-#define CL26 0x007F0000lu
-#define CL27 0x7F000000lu
-
-
-/* MXVR_ALLOC_7 Masks */
-
-#define CIU28 0x00000080lu
-#define CIU29 0x00008000lu
-#define CIU30 0x00800000lu
-#define CIU31 0x80000000lu
-
-#define CL28 0x0000007Flu
-#define CL29 0x00007F00lu
-#define CL30 0x007F0000lu
-#define CL31 0x7F000000lu
-
-
-/* MXVR_ALLOC_8 Masks */
-
-#define CIU32 0x00000080lu
-#define CIU33 0x00008000lu
-#define CIU34 0x00800000lu
-#define CIU35 0x80000000lu
-
-#define CL32 0x0000007Flu
-#define CL33 0x00007F00lu
-#define CL34 0x007F0000lu
-#define CL35 0x7F000000lu
-
-
-/* MXVR_ALLOC_9 Masks */
-
-#define CIU36 0x00000080lu
-#define CIU37 0x00008000lu
-#define CIU38 0x00800000lu
-#define CIU39 0x80000000lu
-
-#define CL36 0x0000007Flu
-#define CL37 0x00007F00lu
-#define CL38 0x007F0000lu
-#define CL39 0x7F000000lu
-
-
-/* MXVR_ALLOC_10 Masks */
-
-#define CIU40 0x00000080lu
-#define CIU41 0x00008000lu
-#define CIU42 0x00800000lu
-#define CIU43 0x80000000lu
-
-#define CL40 0x0000007Flu
-#define CL41 0x00007F00lu
-#define CL42 0x007F0000lu
-#define CL43 0x7F000000lu
-
-
-/* MXVR_ALLOC_11 Masks */
-
-#define CIU44 0x00000080lu
-#define CIU45 0x00008000lu
-#define CIU46 0x00800000lu
-#define CIU47 0x80000000lu
-
-#define CL44 0x0000007Flu
-#define CL45 0x00007F00lu
-#define CL46 0x007F0000lu
-#define CL47 0x7F000000lu
-
-
-/* MXVR_ALLOC_12 Masks */
-
-#define CIU48 0x00000080lu
-#define CIU49 0x00008000lu
-#define CIU50 0x00800000lu
-#define CIU51 0x80000000lu
-
-#define CL48 0x0000007Flu
-#define CL49 0x00007F00lu
-#define CL50 0x007F0000lu
-#define CL51 0x7F000000lu
-
-
-/* MXVR_ALLOC_13 Masks */
-
-#define CIU52 0x00000080lu
-#define CIU53 0x00008000lu
-#define CIU54 0x00800000lu
-#define CIU55 0x80000000lu
-
-#define CL52 0x0000007Flu
-#define CL53 0x00007F00lu
-#define CL54 0x007F0000lu
-#define CL55 0x7F000000lu
-
-
-/* MXVR_ALLOC_14 Masks */
-
-#define CIU56 0x00000080lu
-#define CIU57 0x00008000lu
-#define CIU58 0x00800000lu
-#define CIU59 0x80000000lu
-
-#define CL56 0x0000007Flu
-#define CL57 0x00007F00lu
-#define CL58 0x007F0000lu
-#define CL59 0x7F000000lu
-
-
-/* MXVR_SYNC_LCHAN_0 Masks */
-
-#define LCHANPC0 0x0000000Flu
-#define LCHANPC1 0x000000F0lu
-#define LCHANPC2 0x00000F00lu
-#define LCHANPC3 0x0000F000lu
-#define LCHANPC4 0x000F0000lu
-#define LCHANPC5 0x00F00000lu
-#define LCHANPC6 0x0F000000lu
-#define LCHANPC7 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_1 Masks */
-
-#define LCHANPC8 0x0000000Flu
-#define LCHANPC9 0x000000F0lu
-#define LCHANPC10 0x00000F00lu
-#define LCHANPC11 0x0000F000lu
-#define LCHANPC12 0x000F0000lu
-#define LCHANPC13 0x00F00000lu
-#define LCHANPC14 0x0F000000lu
-#define LCHANPC15 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_2 Masks */
-
-#define LCHANPC16 0x0000000Flu
-#define LCHANPC17 0x000000F0lu
-#define LCHANPC18 0x00000F00lu
-#define LCHANPC19 0x0000F000lu
-#define LCHANPC20 0x000F0000lu
-#define LCHANPC21 0x00F00000lu
-#define LCHANPC22 0x0F000000lu
-#define LCHANPC23 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_3 Masks */
-
-#define LCHANPC24 0x0000000Flu
-#define LCHANPC25 0x000000F0lu
-#define LCHANPC26 0x00000F00lu
-#define LCHANPC27 0x0000F000lu
-#define LCHANPC28 0x000F0000lu
-#define LCHANPC29 0x00F00000lu
-#define LCHANPC30 0x0F000000lu
-#define LCHANPC31 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_4 Masks */
-
-#define LCHANPC32 0x0000000Flu
-#define LCHANPC33 0x000000F0lu
-#define LCHANPC34 0x00000F00lu
-#define LCHANPC35 0x0000F000lu
-#define LCHANPC36 0x000F0000lu
-#define LCHANPC37 0x00F00000lu
-#define LCHANPC38 0x0F000000lu
-#define LCHANPC39 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_5 Masks */
-
-#define LCHANPC40 0x0000000Flu
-#define LCHANPC41 0x000000F0lu
-#define LCHANPC42 0x00000F00lu
-#define LCHANPC43 0x0000F000lu
-#define LCHANPC44 0x000F0000lu
-#define LCHANPC45 0x00F00000lu
-#define LCHANPC46 0x0F000000lu
-#define LCHANPC47 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_6 Masks */
-
-#define LCHANPC48 0x0000000Flu
-#define LCHANPC49 0x000000F0lu
-#define LCHANPC50 0x00000F00lu
-#define LCHANPC51 0x0000F000lu
-#define LCHANPC52 0x000F0000lu
-#define LCHANPC53 0x00F00000lu
-#define LCHANPC54 0x0F000000lu
-#define LCHANPC55 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_7 Masks */
-
-#define LCHANPC56 0x0000000Flu
-#define LCHANPC57 0x000000F0lu
-#define LCHANPC58 0x00000F00lu
-#define LCHANPC59 0x0000F000lu
-
-
-/* MXVR_DMAx_CONFIG Masks */
-
-#define MDMAEN 0x00000001lu
-#define DD 0x00000002lu
-#define LCHAN 0x000003C0lu
-#define BITSWAPEN 0x00000400lu
-#define BYSWAPEN 0x00000800lu
-#define MFLOW 0x00007000lu
-#define FIXEDPM 0x00080000lu
-#define STARTPAT 0x00300000lu
-#define STOPPAT 0x00C00000lu
-#define COUNTPOS 0x1C000000lu
-
-#define DD_TX 0x00000000lu
-#define DD_RX 0x00000002lu
-
-#define LCHAN_0 0x00000000lu
-#define LCHAN_1 0x00000040lu
-#define LCHAN_2 0x00000080lu
-#define LCHAN_3 0x000000C0lu
-#define LCHAN_4 0x00000100lu
-#define LCHAN_5 0x00000140lu
-#define LCHAN_6 0x00000180lu
-#define LCHAN_7 0x000001C0lu
-
-#define MFLOW_STOP 0x00000000lu
-#define MFLOW_AUTO 0x00001000lu
-#define MFLOW_PVC 0x00002000lu
-#define MFLOW_PSS 0x00003000lu
-#define MFLOW_PFC 0x00004000lu
-
-#define STARTPAT_0 0x00000000lu
-#define STARTPAT_1 0x00100000lu
-
-#define STOPPAT_0 0x00000000lu
-#define STOPPAT_1 0x00400000lu
-
-#define COUNTPOS_0 0x00000000lu
-#define COUNTPOS_1 0x04000000lu
-#define COUNTPOS_2 0x08000000lu
-#define COUNTPOS_3 0x0C000000lu
-#define COUNTPOS_4 0x10000000lu
-#define COUNTPOS_5 0x14000000lu
-#define COUNTPOS_6 0x18000000lu
-#define COUNTPOS_7 0x1C000000lu
-
-
-/* MXVR_AP_CTL Masks */
-
-#define STARTAP 0x00000001lu
-#define CANCELAP 0x00000002lu
-#define RESETAP 0x00000004lu
-#define APRBE0 0x00004000lu
-#define APRBE1 0x00008000lu
-#define APRBEX 0x0000C000lu
-
-
-/* MXVR_CM_CTL Masks */
-
-#define STARTCM 0x00000001lu
-#define CANCELCM 0x00000002lu
-#define CMRBEX 0xFFFF0000lu
-#define CMRBE0 0x00010000lu
-#define CMRBE1 0x00020000lu
-#define CMRBE2 0x00040000lu
-#define CMRBE3 0x00080000lu
-#define CMRBE4 0x00100000lu
-#define CMRBE5 0x00200000lu
-#define CMRBE6 0x00400000lu
-#define CMRBE7 0x00800000lu
-#define CMRBE8 0x01000000lu
-#define CMRBE9 0x02000000lu
-#define CMRBE10 0x04000000lu
-#define CMRBE11 0x08000000lu
-#define CMRBE12 0x10000000lu
-#define CMRBE13 0x20000000lu
-#define CMRBE14 0x40000000lu
-#define CMRBE15 0x80000000lu
-
-
-/* MXVR_PAT_DATA_x Masks */
-
-#define MATCH_DATA_0 0x000000FFlu
-#define MATCH_DATA_1 0x0000FF00lu
-#define MATCH_DATA_2 0x00FF0000lu
-#define MATCH_DATA_3 0xFF000000lu
-
-
-
-/* MXVR_PAT_EN_x Masks */
-
-#define MATCH_EN_0_0 0x00000001lu
-#define MATCH_EN_0_1 0x00000002lu
-#define MATCH_EN_0_2 0x00000004lu
-#define MATCH_EN_0_3 0x00000008lu
-#define MATCH_EN_0_4 0x00000010lu
-#define MATCH_EN_0_5 0x00000020lu
-#define MATCH_EN_0_6 0x00000040lu
-#define MATCH_EN_0_7 0x00000080lu
-
-#define MATCH_EN_1_0 0x00000100lu
-#define MATCH_EN_1_1 0x00000200lu
-#define MATCH_EN_1_2 0x00000400lu
-#define MATCH_EN_1_3 0x00000800lu
-#define MATCH_EN_1_4 0x00001000lu
-#define MATCH_EN_1_5 0x00002000lu
-#define MATCH_EN_1_6 0x00004000lu
-#define MATCH_EN_1_7 0x00008000lu
-
-#define MATCH_EN_2_0 0x00010000lu
-#define MATCH_EN_2_1 0x00020000lu
-#define MATCH_EN_2_2 0x00040000lu
-#define MATCH_EN_2_3 0x00080000lu
-#define MATCH_EN_2_4 0x00100000lu
-#define MATCH_EN_2_5 0x00200000lu
-#define MATCH_EN_2_6 0x00400000lu
-#define MATCH_EN_2_7 0x00800000lu
-
-#define MATCH_EN_3_0 0x01000000lu
-#define MATCH_EN_3_1 0x02000000lu
-#define MATCH_EN_3_2 0x04000000lu
-#define MATCH_EN_3_3 0x08000000lu
-#define MATCH_EN_3_4 0x10000000lu
-#define MATCH_EN_3_5 0x20000000lu
-#define MATCH_EN_3_6 0x40000000lu
-#define MATCH_EN_3_7 0x80000000lu
-
-
-/* MXVR_ROUTING_0 Masks */
-
-#define MUTE_CH0 0x00000080lu
-#define MUTE_CH1 0x00008000lu
-#define MUTE_CH2 0x00800000lu
-#define MUTE_CH3 0x80000000lu
-
-#define TX_CH0 0x0000007Flu
-#define TX_CH1 0x00007F00lu
-#define TX_CH2 0x007F0000lu
-#define TX_CH3 0x7F000000lu
-
-
-/* MXVR_ROUTING_1 Masks */
-
-#define MUTE_CH4 0x00000080lu
-#define MUTE_CH5 0x00008000lu
-#define MUTE_CH6 0x00800000lu
-#define MUTE_CH7 0x80000000lu
-
-#define TX_CH4 0x0000007Flu
-#define TX_CH5 0x00007F00lu
-#define TX_CH6 0x007F0000lu
-#define TX_CH7 0x7F000000lu
-
-
-/* MXVR_ROUTING_2 Masks */
-
-#define MUTE_CH8 0x00000080lu
-#define MUTE_CH9 0x00008000lu
-#define MUTE_CH10 0x00800000lu
-#define MUTE_CH11 0x80000000lu
-
-#define TX_CH8 0x0000007Flu
-#define TX_CH9 0x00007F00lu
-#define TX_CH10 0x007F0000lu
-#define TX_CH11 0x7F000000lu
-
-/* MXVR_ROUTING_3 Masks */
-
-#define MUTE_CH12 0x00000080lu
-#define MUTE_CH13 0x00008000lu
-#define MUTE_CH14 0x00800000lu
-#define MUTE_CH15 0x80000000lu
-
-#define TX_CH12 0x0000007Flu
-#define TX_CH13 0x00007F00lu
-#define TX_CH14 0x007F0000lu
-#define TX_CH15 0x7F000000lu
-
-
-/* MXVR_ROUTING_4 Masks */
-
-#define MUTE_CH16 0x00000080lu
-#define MUTE_CH17 0x00008000lu
-#define MUTE_CH18 0x00800000lu
-#define MUTE_CH19 0x80000000lu
-
-#define TX_CH16 0x0000007Flu
-#define TX_CH17 0x00007F00lu
-#define TX_CH18 0x007F0000lu
-#define TX_CH19 0x7F000000lu
-
-
-/* MXVR_ROUTING_5 Masks */
-
-#define MUTE_CH20 0x00000080lu
-#define MUTE_CH21 0x00008000lu
-#define MUTE_CH22 0x00800000lu
-#define MUTE_CH23 0x80000000lu
-
-#define TX_CH20 0x0000007Flu
-#define TX_CH21 0x00007F00lu
-#define TX_CH22 0x007F0000lu
-#define TX_CH23 0x7F000000lu
-
-
-/* MXVR_ROUTING_6 Masks */
-
-#define MUTE_CH24 0x00000080lu
-#define MUTE_CH25 0x00008000lu
-#define MUTE_CH26 0x00800000lu
-#define MUTE_CH27 0x80000000lu
-
-#define TX_CH24 0x0000007Flu
-#define TX_CH25 0x00007F00lu
-#define TX_CH26 0x007F0000lu
-#define TX_CH27 0x7F000000lu
-
-
-/* MXVR_ROUTING_7 Masks */
-
-#define MUTE_CH28 0x00000080lu
-#define MUTE_CH29 0x00008000lu
-#define MUTE_CH30 0x00800000lu
-#define MUTE_CH31 0x80000000lu
-
-#define TX_CH28 0x0000007Flu
-#define TX_CH29 0x00007F00lu
-#define TX_CH30 0x007F0000lu
-#define TX_CH31 0x7F000000lu
-
-
-/* MXVR_ROUTING_8 Masks */
-
-#define MUTE_CH32 0x00000080lu
-#define MUTE_CH33 0x00008000lu
-#define MUTE_CH34 0x00800000lu
-#define MUTE_CH35 0x80000000lu
-
-#define TX_CH32 0x0000007Flu
-#define TX_CH33 0x00007F00lu
-#define TX_CH34 0x007F0000lu
-#define TX_CH35 0x7F000000lu
-
-
-/* MXVR_ROUTING_9 Masks */
-
-#define MUTE_CH36 0x00000080lu
-#define MUTE_CH37 0x00008000lu
-#define MUTE_CH38 0x00800000lu
-#define MUTE_CH39 0x80000000lu
-
-#define TX_CH36 0x0000007Flu
-#define TX_CH37 0x00007F00lu
-#define TX_CH38 0x007F0000lu
-#define TX_CH39 0x7F000000lu
-
-
-/* MXVR_ROUTING_10 Masks */
-
-#define MUTE_CH40 0x00000080lu
-#define MUTE_CH41 0x00008000lu
-#define MUTE_CH42 0x00800000lu
-#define MUTE_CH43 0x80000000lu
-
-#define TX_CH40 0x0000007Flu
-#define TX_CH41 0x00007F00lu
-#define TX_CH42 0x007F0000lu
-#define TX_CH43 0x7F000000lu
-
-
-/* MXVR_ROUTING_11 Masks */
-
-#define MUTE_CH44 0x00000080lu
-#define MUTE_CH45 0x00008000lu
-#define MUTE_CH46 0x00800000lu
-#define MUTE_CH47 0x80000000lu
-
-#define TX_CH44 0x0000007Flu
-#define TX_CH45 0x00007F00lu
-#define TX_CH46 0x007F0000lu
-#define TX_CH47 0x7F000000lu
-
-
-/* MXVR_ROUTING_12 Masks */
-
-#define MUTE_CH48 0x00000080lu
-#define MUTE_CH49 0x00008000lu
-#define MUTE_CH50 0x00800000lu
-#define MUTE_CH51 0x80000000lu
-
-#define TX_CH48 0x0000007Flu
-#define TX_CH49 0x00007F00lu
-#define TX_CH50 0x007F0000lu
-#define TX_CH51 0x7F000000lu
-
-
-/* MXVR_ROUTING_13 Masks */
-
-#define MUTE_CH52 0x00000080lu
-#define MUTE_CH53 0x00008000lu
-#define MUTE_CH54 0x00800000lu
-#define MUTE_CH55 0x80000000lu
-
-#define TX_CH52 0x0000007Flu
-#define TX_CH53 0x00007F00lu
-#define TX_CH54 0x007F0000lu
-#define TX_CH55 0x7F000000lu
-
-
-/* MXVR_ROUTING_14 Masks */
-
-#define MUTE_CH56 0x00000080lu
-#define MUTE_CH57 0x00008000lu
-#define MUTE_CH58 0x00800000lu
-#define MUTE_CH59 0x80000000lu
-
-#define TX_CH56 0x0000007Flu
-#define TX_CH57 0x00007F00lu
-#define TX_CH58 0x007F0000lu
-#define TX_CH59 0x7F000000lu
-
-
-/* Control Message Receive Buffer (CMRB) Address Offsets */
-
-#define CMRB_STRIDE 0x00000016lu
-
-#define CMRB_DST_OFFSET 0x00000000lu
-#define CMRB_SRC_OFFSET 0x00000002lu
-#define CMRB_DATA_OFFSET 0x00000005lu
-
-
-/* Control Message Transmit Buffer (CMTB) Address Offsets */
-
-#define CMTB_PRIO_OFFSET 0x00000000lu
-#define CMTB_DST_OFFSET 0x00000002lu
-#define CMTB_SRC_OFFSET 0x00000004lu
-#define CMTB_TYPE_OFFSET 0x00000006lu
-#define CMTB_DATA_OFFSET 0x00000007lu
-
-#define CMTB_ANSWER_OFFSET 0x0000000Alu
-
-#define CMTB_STAT_N_OFFSET 0x00000018lu
-#define CMTB_STAT_A_OFFSET 0x00000016lu
-#define CMTB_STAT_D_OFFSET 0x0000000Elu
-#define CMTB_STAT_R_OFFSET 0x00000014lu
-#define CMTB_STAT_W_OFFSET 0x00000014lu
-#define CMTB_STAT_G_OFFSET 0x00000014lu
-
-
-/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */
-
-#define APRB_STRIDE 0x00000400lu
-
-#define APRB_DST_OFFSET 0x00000000lu
-#define APRB_LEN_OFFSET 0x00000002lu
-#define APRB_SRC_OFFSET 0x00000004lu
-#define APRB_DATA_OFFSET 0x00000006lu
-
-
-/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */
-
-#define APTB_PRIO_OFFSET 0x00000000lu
-#define APTB_DST_OFFSET 0x00000002lu
-#define APTB_LEN_OFFSET 0x00000004lu
-#define APTB_SRC_OFFSET 0x00000006lu
-#define APTB_DATA_OFFSET 0x00000008lu
-
-
-/* Remote Read Buffer (RRDB) Address Offsets */
-
-#define RRDB_WADDR_OFFSET 0x00000100lu
-#define RRDB_WLEN_OFFSET 0x00000101lu
-
-
-
/* ************ CONTROLLER AREA NETWORK (CAN) MASKS ***************/
/* CAN_CONTROL Masks */
#define SRS 0x0001 /* Software Reset */
diff --git a/arch/blackfin/mach-bf538/include/mach/gpio.h b/arch/blackfin/mach-bf538/include/mach/gpio.h
index 295c78a..0c346fb 100644
--- a/arch/blackfin/mach-bf538/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf538/include/mach/gpio.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2008 Analog Devices Inc.
+ * Copyright (C) 2008-2009 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -7,11 +7,8 @@
#ifndef _MACH_GPIO_H_
#define _MACH_GPIO_H_
- /* FIXME:
- * For now only support PORTF GPIOs.
- * PORT C,D and E are for peripheral usage only
- */
#define MAX_BLACKFIN_GPIOS 16
+#define BFIN_SPECIAL_GPIO_BANKS 3
#define GPIO_PF0 0 /* PF */
#define GPIO_PF1 1
diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h
index 6121cf8..0083ba1 100644
--- a/arch/blackfin/mach-bf538/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf538/include/mach/portmux.h
@@ -7,7 +7,7 @@
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
-#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
+#define MAX_RESOURCES 64
#define P_TMR2 (P_DONTCARE)
#define P_TMR1 (P_DONTCARE)
diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig
index a09623d..70189a0 100644
--- a/arch/blackfin/mach-bf548/Kconfig
+++ b/arch/blackfin/mach-bf548/Kconfig
@@ -1,3 +1,27 @@
+config BF542
+ def_bool y
+ depends on BF542_std || BF542M
+config BF544
+ def_bool y
+ depends on BF544_std || BF544M
+config BF547
+ def_bool y
+ depends on BF547_std || BF547M
+config BF548
+ def_bool y
+ depends on BF548_std || BF548M
+config BF549
+ def_bool y
+ depends on BF549_std || BF549M
+
+config BF54xM
+ def_bool y
+ depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
+
+config BF54x
+ def_bool y
+ depends on (BF542 || BF544 || BF547 || BF548 || BF549)
+
if (BF54x)
source "arch/blackfin/mach-bf548/boards/Kconfig"
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 1a5286b..60193f7 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -62,7 +62,7 @@
};
static struct platform_device bfin_isp1760_device = {
- .name = "isp1760-hcd",
+ .name = "isp1760",
.id = 0,
.dev = {
.platform_data = &isp1760_priv,
@@ -154,7 +154,7 @@
};
#endif
-#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#include <asm/bfin_rotary.h>
static struct bfin_rotary_platform_data bfin_rotary_data = {
@@ -186,7 +186,7 @@
#endif
#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
-#include <linux/spi/adxl34x.h>
+#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
.x_axis_offset = 0,
.y_axis_offset = 0,
@@ -210,14 +210,17 @@
.ev_code_y = ABS_Y, /* EV_REL */
.ev_code_z = ABS_Z, /* EV_REL */
- .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */
- .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */
- .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */
+ .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
/* .ev_code_ff = KEY_F,*/ /* EV_KEY */
/* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
.power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
.fifo_mode = ADXL_FIFO_STREAM,
+ .orientation_enable = ADXL_EN_ORIENTATION_3D,
+ .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
+ .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
+ /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
+ .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
};
#endif
@@ -461,6 +464,44 @@
};
#endif
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+unsigned short bfin_can_peripherals[] = {
+ P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+ {
+ .start = 0xFFC02A00,
+ .end = 0xFFC02FFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CAN0_RX,
+ .end = IRQ_CAN0_RX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CAN0_TX,
+ .end = IRQ_CAN0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CAN0_ERROR,
+ .end = IRQ_CAN0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_can_device = {
+ .name = "bfin_can",
+ .num_resources = ARRAY_SIZE(bfin_can_resources),
+ .resource = bfin_can_resources,
+ .dev = {
+ .platform_data = &bfin_can_peripherals, /* Passed to driver */
+ },
+};
+#endif
+
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
static struct resource bfin_atapi_resources[] = {
{
@@ -953,6 +994,10 @@
&bfin_isp1760_device,
#endif
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+ &bfin_can_device,
+#endif
+
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
&bfin_atapi_device,
#endif
@@ -974,7 +1019,7 @@
&bf54x_kpad_device,
#endif
-#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
&bfin_rotary_device,
#endif
diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
index 7bead5c..751e5e1 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf548.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
@@ -81,18 +81,6 @@
#define AMGCTLVAL (V_AMBEN | V_AMCKEN)
-#if defined(CONFIG_BF542M)
-# define CONFIG_BF542
-#elif defined(CONFIG_BF544M)
-# define CONFIG_BF544
-#elif defined(CONFIG_BF547M)
-# define CONFIG_BF547
-#elif defined(CONFIG_BF548M)
-# define CONFIG_BF548
-#elif defined(CONFIG_BF549M)
-# define CONFIG_BF549
-#endif
-
#if defined(CONFIG_BF542)
# define CPU "BF542"
# define CPUID 0x27de
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index 13302b6..5684030 100644
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -64,10 +64,4 @@
#define OFFSET_THR 0x28 /* Transmit Holding register */
#define OFFSET_RBR 0x2C /* Receive Buffer register */
-/* PLL_DIV Masks */
-#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
-#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
-#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */
-#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */
-
#endif
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
index 4234215..bc650e6 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
@@ -4,21 +4,21 @@
* Licensed under the GPL-2 or later.
*/
-#ifndef _CDEF_BF548_H
-#define _CDEF_BF548_H
+#ifndef _CDEF_BF547_H
+#define _CDEF_BF547_H
/* include all Core registers and bit definitions */
-#include "defBF548.h"
+#include "defBF547.h"
/* include core sbfin_read_()ecific register pointer definitions */
#include <asm/cdef_LPBlackfin.h>
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF547 */
/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
#include "cdefBF54x_base.h"
-/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+/* The following are the #defines needed by ADSP-BF547 that are not in the common header */
/* Timer Registers */
@@ -805,4 +805,4 @@
#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT)
#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val)
-#endif /* _CDEF_BF548_H */
+#endif /* _CDEF_BF547_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
index df84180..3523e08 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
@@ -18,165 +18,8 @@
/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
#include "cdefBF54x_base.h"
-/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
-
-/* Timer Registers */
-
-#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG)
-#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val)
-#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER)
-#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val)
-#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD)
-#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val)
-#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH)
-#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val)
-#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG)
-#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val)
-#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER)
-#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val)
-#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD)
-#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val)
-#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH)
-#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val)
-#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG)
-#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val)
-#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER)
-#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val)
-#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD)
-#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val)
-#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH)
-#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val)
-
-/* Timer Groubfin_read_() of 3 */
-
-#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1)
-#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val)
-#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1)
-#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val)
-#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1)
-#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val)
-
-/* SPORT0 Registers */
-
-#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1)
-#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val)
-#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2)
-#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val)
-#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV)
-#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val)
-#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV)
-#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val)
-#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX)
-#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val)
-#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX)
-#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val)
-#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1)
-#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val)
-#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2)
-#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val)
-#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV)
-#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val)
-#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV)
-#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val)
-#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT)
-#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val)
-#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL)
-#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val)
-#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1)
-#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val)
-#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2)
-#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val)
-#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0)
-#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val)
-#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1)
-#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val)
-#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2)
-#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val)
-#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3)
-#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val)
-#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0)
-#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val)
-#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1)
-#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val)
-#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2)
-#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val)
-#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3)
-#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val)
-
-/* EPPI0 Registers */
-
-#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS)
-#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val)
-#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT)
-#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val)
-#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY)
-#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val)
-#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT)
-#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val)
-#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY)
-#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val)
-#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME)
-#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val)
-#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE)
-#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val)
-#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV)
-#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val)
-#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL)
-#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val)
-#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL)
-#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val)
-#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL)
-#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val)
-#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB)
-#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val)
-#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF)
-#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val)
-#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP)
-#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val)
-
-/* UART2 Registers */
-
-#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL)
-#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val)
-#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH)
-#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val)
-#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL)
-#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val)
-#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR)
-#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val)
-#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR)
-#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val)
-#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR)
-#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val)
-#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR)
-#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val)
-#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR)
-#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val)
-#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET)
-#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val)
-#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR)
-#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val)
-#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR)
-#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val)
-
-/* Two Wire Interface Registers (TWI1) */
-
-/* SPI2 Registers */
-
-#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL)
-#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val)
-#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG)
-#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val)
-#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT)
-#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val)
-#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR)
-#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val)
-#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR)
-#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val)
-#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD)
-#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val)
-#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW)
-#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val)
+/* The BF548 is like the BF547, but has additional CANs */
+#include "cdefBF547.h"
/* CAN Controller 1 Config 1 Registers */
@@ -923,631 +766,4 @@
#define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1)
#define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val)
-/* ATAPI Registers */
-
-#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL)
-#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val)
-#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS)
-#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val)
-#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR)
-#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val)
-#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF)
-#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val)
-#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF)
-#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val)
-#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK)
-#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val)
-#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS)
-#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val)
-#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN)
-#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val)
-#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS)
-#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val)
-#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE)
-#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val)
-#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE)
-#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val)
-#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT)
-#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val)
-#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT)
-#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val)
-#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT)
-#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val)
-#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT)
-#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
-#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0)
-#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val)
-#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0)
-#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val)
-#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1)
-#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val)
-#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0)
-#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val)
-#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1)
-#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val)
-#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2)
-#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val)
-#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0)
-#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val)
-#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1)
-#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val)
-#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2)
-#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val)
-#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3)
-#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val)
-
-/* SDH Registers */
-
-#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL)
-#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val)
-#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL)
-#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val)
-#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT)
-#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val)
-#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND)
-#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val)
-#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD)
-#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val)
-#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0)
-#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val)
-#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1)
-#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val)
-#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2)
-#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val)
-#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3)
-#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val)
-#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER)
-#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val)
-#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH)
-#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val)
-#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL)
-#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val)
-#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT)
-#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val)
-#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS)
-#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val)
-#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR)
-#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val)
-#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0)
-#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val)
-#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1)
-#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val)
-#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT)
-#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val)
-#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO)
-#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val)
-#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS)
-#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val)
-#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK)
-#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val)
-#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG)
-#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val)
-#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN)
-#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val)
-#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0)
-#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val)
-#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1)
-#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val)
-#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2)
-#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val)
-#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3)
-#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val)
-#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4)
-#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val)
-#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5)
-#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val)
-#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6)
-#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val)
-#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7)
-#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val)
-
-/* HOST Port Registers */
-
-#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL)
-#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val)
-#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS)
-#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val)
-#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT)
-#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val)
-
-/* USB Control Registers */
-
-#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR)
-#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val)
-#define bfin_read_USB_POWER() bfin_read16(USB_POWER)
-#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val)
-#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX)
-#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val)
-#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX)
-#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val)
-#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE)
-#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val)
-#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE)
-#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val)
-#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB)
-#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val)
-#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE)
-#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val)
-#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME)
-#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val)
-#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX)
-#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val)
-#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE)
-#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val)
-#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR)
-#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val)
-#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL)
-#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val)
-
-/* USB Packet Control Registers */
-
-#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET)
-#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val)
-#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0)
-#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val)
-#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR)
-#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val)
-#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET)
-#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val)
-#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR)
-#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val)
-#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0)
-#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val)
-#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT)
-#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val)
-#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE)
-#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val)
-#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0)
-#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val)
-#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL)
-#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val)
-#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE)
-#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val)
-#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL)
-#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val)
-#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT)
-#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val)
-
-/* USB Endbfin_read_()oint FIFO Registers */
-
-#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO)
-#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val)
-#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO)
-#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val)
-#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO)
-#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val)
-#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO)
-#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val)
-#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO)
-#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val)
-#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO)
-#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val)
-#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO)
-#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val)
-#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO)
-#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val)
-
-/* USB OTG Control Registers */
-
-#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL)
-#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val)
-#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ)
-#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val)
-#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK)
-#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val)
-
-/* USB Phy Control Registers */
-
-#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO)
-#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val)
-#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN)
-#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val)
-#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1)
-#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val)
-#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1)
-#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val)
-#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1)
-#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val)
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL)
-#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val)
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB)
-#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val)
-#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2)
-#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val)
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST)
-#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val)
-#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL)
-#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val)
-#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV)
-#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val)
-
-/* USB Endbfin_read_()oint 0 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP)
-#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val)
-#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR)
-#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val)
-#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP)
-#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val)
-#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR)
-#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val)
-#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT)
-#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val)
-#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE)
-#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val)
-#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL)
-#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE)
-#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val)
-#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL)
-#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 1 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT)
-#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP)
-#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val)
-#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR)
-#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val)
-#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP)
-#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val)
-#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR)
-#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val)
-#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT)
-#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE)
-#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val)
-#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL)
-#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE)
-#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val)
-#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL)
-#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 2 Control Registers */
-
-#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT)
-#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP)
-#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val)
-#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR)
-#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val)
-#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP)
-#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val)
-#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR)
-#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val)
-#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT)
-#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE)
-#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val)
-#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL)
-#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE)
-#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val)
-#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL)
-#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 3 Control Registers */
-
-#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT)
-#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP)
-#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val)
-#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR)
-#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val)
-#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP)
-#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val)
-#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR)
-#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val)
-#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT)
-#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE)
-#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val)
-#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL)
-#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE)
-#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val)
-#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL)
-#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 4 Control Registers */
-
-#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT)
-#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP)
-#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val)
-#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR)
-#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val)
-#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP)
-#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val)
-#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR)
-#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val)
-#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT)
-#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE)
-#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val)
-#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL)
-#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE)
-#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val)
-#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL)
-#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 5 Control Registers */
-
-#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT)
-#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP)
-#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val)
-#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR)
-#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val)
-#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP)
-#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val)
-#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR)
-#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val)
-#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT)
-#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE)
-#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val)
-#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL)
-#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE)
-#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val)
-#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL)
-#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 6 Control Registers */
-
-#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT)
-#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP)
-#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val)
-#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR)
-#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val)
-#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP)
-#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val)
-#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR)
-#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val)
-#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT)
-#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE)
-#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val)
-#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL)
-#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE)
-#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val)
-#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL)
-#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 7 Control Registers */
-
-#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT)
-#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP)
-#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val)
-#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR)
-#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val)
-#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP)
-#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val)
-#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR)
-#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val)
-#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT)
-#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE)
-#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val)
-#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL)
-#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE)
-#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val)
-#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL)
-#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT)
-#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val)
-#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT)
-#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val)
-
-/* USB Channel 0 Config Registers */
-
-#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL)
-#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val)
-#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW)
-#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val)
-#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH)
-#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val)
-#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW)
-#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val)
-#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH)
-#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val)
-
-/* USB Channel 1 Config Registers */
-
-#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL)
-#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val)
-#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW)
-#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val)
-#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH)
-#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val)
-#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW)
-#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val)
-#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH)
-#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val)
-
-/* USB Channel 2 Config Registers */
-
-#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL)
-#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val)
-#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW)
-#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val)
-#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH)
-#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val)
-#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW)
-#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val)
-#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH)
-#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val)
-
-/* USB Channel 3 Config Registers */
-
-#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL)
-#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val)
-#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW)
-#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val)
-#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH)
-#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val)
-#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW)
-#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val)
-#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH)
-#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val)
-
-/* USB Channel 4 Config Registers */
-
-#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL)
-#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val)
-#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW)
-#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val)
-#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH)
-#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val)
-#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW)
-#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val)
-#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH)
-#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val)
-
-/* USB Channel 5 Config Registers */
-
-#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL)
-#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val)
-#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW)
-#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val)
-#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH)
-#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val)
-#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW)
-#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val)
-#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH)
-#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val)
-
-/* USB Channel 6 Config Registers */
-
-#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL)
-#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val)
-#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW)
-#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val)
-#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH)
-#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val)
-#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW)
-#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val)
-#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH)
-#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val)
-
-/* USB Channel 7 Config Registers */
-
-#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL)
-#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val)
-#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW)
-#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val)
-#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH)
-#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val)
-#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW)
-#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val)
-#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH)
-#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val)
-
-/* Keybfin_read_()ad Registers */
-
-#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL)
-#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val)
-#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE)
-#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val)
-#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL)
-#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val)
-#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL)
-#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val)
-#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT)
-#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val)
-#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL)
-#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val)
-
-/* Pixel Combfin_read_()ositor (PIXC) Registers */
-
-#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL)
-#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val)
-#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL)
-#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val)
-#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF)
-#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val)
-#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART)
-#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val)
-#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND)
-#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val)
-#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART)
-#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val)
-#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND)
-#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val)
-#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP)
-#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val)
-#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART)
-#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val)
-#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND)
-#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val)
-#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART)
-#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val)
-#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND)
-#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val)
-#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP)
-#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val)
-#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT)
-#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val)
-#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON)
-#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val)
-#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON)
-#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val)
-#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON)
-#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val)
-#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS)
-#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val)
-#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC)
-#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val)
-
-/* Handshake MDMA 0 Registers */
-
-#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL)
-#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val)
-#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT)
-#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val)
-#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT)
-#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val)
-#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT)
-#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val)
-#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW)
-#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val)
-#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT)
-#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val)
-#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT)
-#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val)
-
-/* Handshake MDMA 1 Registers */
-
-#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL)
-#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val)
-#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT)
-#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val)
-#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT)
-#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val)
-#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT)
-#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val)
-#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW)
-#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val)
-#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT)
-#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val)
-#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT)
-#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val)
-
#endif /* _CDEF_BF548_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
index 34c84c7..80201ed 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
@@ -18,165 +18,8 @@
/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */
#include "cdefBF54x_base.h"
-/* The following are the #defines needed by ADSP-BF549 that are not in the common header */
-
-/* Timer Registers */
-
-#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG)
-#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val)
-#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER)
-#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val)
-#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD)
-#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val)
-#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH)
-#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val)
-#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG)
-#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val)
-#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER)
-#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val)
-#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD)
-#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val)
-#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH)
-#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val)
-#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG)
-#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val)
-#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER)
-#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val)
-#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD)
-#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val)
-#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH)
-#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val)
-
-/* Timer Groubfin_read_() of 3 */
-
-#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1)
-#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val)
-#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1)
-#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val)
-#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1)
-#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val)
-
-/* SPORT0 Registers */
-
-#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1)
-#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val)
-#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2)
-#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val)
-#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV)
-#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val)
-#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV)
-#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val)
-#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX)
-#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val)
-#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX)
-#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val)
-#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1)
-#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val)
-#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2)
-#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val)
-#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV)
-#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val)
-#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV)
-#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val)
-#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT)
-#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val)
-#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL)
-#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val)
-#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1)
-#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val)
-#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2)
-#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val)
-#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0)
-#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val)
-#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1)
-#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val)
-#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2)
-#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val)
-#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3)
-#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val)
-#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0)
-#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val)
-#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1)
-#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val)
-#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2)
-#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val)
-#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3)
-#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val)
-
-/* EPPI0 Registers */
-
-#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS)
-#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val)
-#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT)
-#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val)
-#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY)
-#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val)
-#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT)
-#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val)
-#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY)
-#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val)
-#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME)
-#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val)
-#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE)
-#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val)
-#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV)
-#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val)
-#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL)
-#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val)
-#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL)
-#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val)
-#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL)
-#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val)
-#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB)
-#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val)
-#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF)
-#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val)
-#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP)
-#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val)
-
-/* UART2 Registers */
-
-#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL)
-#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val)
-#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH)
-#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val)
-#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL)
-#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val)
-#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR)
-#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val)
-#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR)
-#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val)
-#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR)
-#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val)
-#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR)
-#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val)
-#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR)
-#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val)
-#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET)
-#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val)
-#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR)
-#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val)
-#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR)
-#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val)
-
-/* Two Wire Interface Registers (TWI1) */
-
-/* SPI2 Registers */
-
-#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL)
-#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val)
-#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG)
-#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val)
-#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT)
-#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val)
-#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR)
-#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val)
-#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR)
-#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val)
-#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD)
-#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val)
-#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW)
-#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val)
+/* The BF549 is like the BF544, but has MXVR */
+#include "cdefBF547.h"
/* MXVR Registers */
@@ -464,1376 +307,4 @@
#define bfin_read_MXVR_SCLK_CNT() bfin_read16(MXVR_SCLK_CNT)
#define bfin_write_MXVR_SCLK_CNT(val) bfin_write16(MXVR_SCLK_CNT, val)
-/* CAN Controller 1 Config 1 Registers */
-
-#define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1)
-#define bfin_write_CAN1_MC1(val) bfin_write16(CAN1_MC1, val)
-#define bfin_read_CAN1_MD1() bfin_read16(CAN1_MD1)
-#define bfin_write_CAN1_MD1(val) bfin_write16(CAN1_MD1, val)
-#define bfin_read_CAN1_TRS1() bfin_read16(CAN1_TRS1)
-#define bfin_write_CAN1_TRS1(val) bfin_write16(CAN1_TRS1, val)
-#define bfin_read_CAN1_TRR1() bfin_read16(CAN1_TRR1)
-#define bfin_write_CAN1_TRR1(val) bfin_write16(CAN1_TRR1, val)
-#define bfin_read_CAN1_TA1() bfin_read16(CAN1_TA1)
-#define bfin_write_CAN1_TA1(val) bfin_write16(CAN1_TA1, val)
-#define bfin_read_CAN1_AA1() bfin_read16(CAN1_AA1)
-#define bfin_write_CAN1_AA1(val) bfin_write16(CAN1_AA1, val)
-#define bfin_read_CAN1_RMP1() bfin_read16(CAN1_RMP1)
-#define bfin_write_CAN1_RMP1(val) bfin_write16(CAN1_RMP1, val)
-#define bfin_read_CAN1_RML1() bfin_read16(CAN1_RML1)
-#define bfin_write_CAN1_RML1(val) bfin_write16(CAN1_RML1, val)
-#define bfin_read_CAN1_MBTIF1() bfin_read16(CAN1_MBTIF1)
-#define bfin_write_CAN1_MBTIF1(val) bfin_write16(CAN1_MBTIF1, val)
-#define bfin_read_CAN1_MBRIF1() bfin_read16(CAN1_MBRIF1)
-#define bfin_write_CAN1_MBRIF1(val) bfin_write16(CAN1_MBRIF1, val)
-#define bfin_read_CAN1_MBIM1() bfin_read16(CAN1_MBIM1)
-#define bfin_write_CAN1_MBIM1(val) bfin_write16(CAN1_MBIM1, val)
-#define bfin_read_CAN1_RFH1() bfin_read16(CAN1_RFH1)
-#define bfin_write_CAN1_RFH1(val) bfin_write16(CAN1_RFH1, val)
-#define bfin_read_CAN1_OPSS1() bfin_read16(CAN1_OPSS1)
-#define bfin_write_CAN1_OPSS1(val) bfin_write16(CAN1_OPSS1, val)
-
-/* CAN Controller 1 Config 2 Registers */
-
-#define bfin_read_CAN1_MC2() bfin_read16(CAN1_MC2)
-#define bfin_write_CAN1_MC2(val) bfin_write16(CAN1_MC2, val)
-#define bfin_read_CAN1_MD2() bfin_read16(CAN1_MD2)
-#define bfin_write_CAN1_MD2(val) bfin_write16(CAN1_MD2, val)
-#define bfin_read_CAN1_TRS2() bfin_read16(CAN1_TRS2)
-#define bfin_write_CAN1_TRS2(val) bfin_write16(CAN1_TRS2, val)
-#define bfin_read_CAN1_TRR2() bfin_read16(CAN1_TRR2)
-#define bfin_write_CAN1_TRR2(val) bfin_write16(CAN1_TRR2, val)
-#define bfin_read_CAN1_TA2() bfin_read16(CAN1_TA2)
-#define bfin_write_CAN1_TA2(val) bfin_write16(CAN1_TA2, val)
-#define bfin_read_CAN1_AA2() bfin_read16(CAN1_AA2)
-#define bfin_write_CAN1_AA2(val) bfin_write16(CAN1_AA2, val)
-#define bfin_read_CAN1_RMP2() bfin_read16(CAN1_RMP2)
-#define bfin_write_CAN1_RMP2(val) bfin_write16(CAN1_RMP2, val)
-#define bfin_read_CAN1_RML2() bfin_read16(CAN1_RML2)
-#define bfin_write_CAN1_RML2(val) bfin_write16(CAN1_RML2, val)
-#define bfin_read_CAN1_MBTIF2() bfin_read16(CAN1_MBTIF2)
-#define bfin_write_CAN1_MBTIF2(val) bfin_write16(CAN1_MBTIF2, val)
-#define bfin_read_CAN1_MBRIF2() bfin_read16(CAN1_MBRIF2)
-#define bfin_write_CAN1_MBRIF2(val) bfin_write16(CAN1_MBRIF2, val)
-#define bfin_read_CAN1_MBIM2() bfin_read16(CAN1_MBIM2)
-#define bfin_write_CAN1_MBIM2(val) bfin_write16(CAN1_MBIM2, val)
-#define bfin_read_CAN1_RFH2() bfin_read16(CAN1_RFH2)
-#define bfin_write_CAN1_RFH2(val) bfin_write16(CAN1_RFH2, val)
-#define bfin_read_CAN1_OPSS2() bfin_read16(CAN1_OPSS2)
-#define bfin_write_CAN1_OPSS2(val) bfin_write16(CAN1_OPSS2, val)
-
-/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */
-
-#define bfin_read_CAN1_CLOCK() bfin_read16(CAN1_CLOCK)
-#define bfin_write_CAN1_CLOCK(val) bfin_write16(CAN1_CLOCK, val)
-#define bfin_read_CAN1_TIMING() bfin_read16(CAN1_TIMING)
-#define bfin_write_CAN1_TIMING(val) bfin_write16(CAN1_TIMING, val)
-#define bfin_read_CAN1_DEBUG() bfin_read16(CAN1_DEBUG)
-#define bfin_write_CAN1_DEBUG(val) bfin_write16(CAN1_DEBUG, val)
-#define bfin_read_CAN1_STATUS() bfin_read16(CAN1_STATUS)
-#define bfin_write_CAN1_STATUS(val) bfin_write16(CAN1_STATUS, val)
-#define bfin_read_CAN1_CEC() bfin_read16(CAN1_CEC)
-#define bfin_write_CAN1_CEC(val) bfin_write16(CAN1_CEC, val)
-#define bfin_read_CAN1_GIS() bfin_read16(CAN1_GIS)
-#define bfin_write_CAN1_GIS(val) bfin_write16(CAN1_GIS, val)
-#define bfin_read_CAN1_GIM() bfin_read16(CAN1_GIM)
-#define bfin_write_CAN1_GIM(val) bfin_write16(CAN1_GIM, val)
-#define bfin_read_CAN1_GIF() bfin_read16(CAN1_GIF)
-#define bfin_write_CAN1_GIF(val) bfin_write16(CAN1_GIF, val)
-#define bfin_read_CAN1_CONTROL() bfin_read16(CAN1_CONTROL)
-#define bfin_write_CAN1_CONTROL(val) bfin_write16(CAN1_CONTROL, val)
-#define bfin_read_CAN1_INTR() bfin_read16(CAN1_INTR)
-#define bfin_write_CAN1_INTR(val) bfin_write16(CAN1_INTR, val)
-#define bfin_read_CAN1_MBTD() bfin_read16(CAN1_MBTD)
-#define bfin_write_CAN1_MBTD(val) bfin_write16(CAN1_MBTD, val)
-#define bfin_read_CAN1_EWR() bfin_read16(CAN1_EWR)
-#define bfin_write_CAN1_EWR(val) bfin_write16(CAN1_EWR, val)
-#define bfin_read_CAN1_ESR() bfin_read16(CAN1_ESR)
-#define bfin_write_CAN1_ESR(val) bfin_write16(CAN1_ESR, val)
-#define bfin_read_CAN1_UCCNT() bfin_read16(CAN1_UCCNT)
-#define bfin_write_CAN1_UCCNT(val) bfin_write16(CAN1_UCCNT, val)
-#define bfin_read_CAN1_UCRC() bfin_read16(CAN1_UCRC)
-#define bfin_write_CAN1_UCRC(val) bfin_write16(CAN1_UCRC, val)
-#define bfin_read_CAN1_UCCNF() bfin_read16(CAN1_UCCNF)
-#define bfin_write_CAN1_UCCNF(val) bfin_write16(CAN1_UCCNF, val)
-
-/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
-
-#define bfin_read_CAN1_AM00L() bfin_read16(CAN1_AM00L)
-#define bfin_write_CAN1_AM00L(val) bfin_write16(CAN1_AM00L, val)
-#define bfin_read_CAN1_AM00H() bfin_read16(CAN1_AM00H)
-#define bfin_write_CAN1_AM00H(val) bfin_write16(CAN1_AM00H, val)
-#define bfin_read_CAN1_AM01L() bfin_read16(CAN1_AM01L)
-#define bfin_write_CAN1_AM01L(val) bfin_write16(CAN1_AM01L, val)
-#define bfin_read_CAN1_AM01H() bfin_read16(CAN1_AM01H)
-#define bfin_write_CAN1_AM01H(val) bfin_write16(CAN1_AM01H, val)
-#define bfin_read_CAN1_AM02L() bfin_read16(CAN1_AM02L)
-#define bfin_write_CAN1_AM02L(val) bfin_write16(CAN1_AM02L, val)
-#define bfin_read_CAN1_AM02H() bfin_read16(CAN1_AM02H)
-#define bfin_write_CAN1_AM02H(val) bfin_write16(CAN1_AM02H, val)
-#define bfin_read_CAN1_AM03L() bfin_read16(CAN1_AM03L)
-#define bfin_write_CAN1_AM03L(val) bfin_write16(CAN1_AM03L, val)
-#define bfin_read_CAN1_AM03H() bfin_read16(CAN1_AM03H)
-#define bfin_write_CAN1_AM03H(val) bfin_write16(CAN1_AM03H, val)
-#define bfin_read_CAN1_AM04L() bfin_read16(CAN1_AM04L)
-#define bfin_write_CAN1_AM04L(val) bfin_write16(CAN1_AM04L, val)
-#define bfin_read_CAN1_AM04H() bfin_read16(CAN1_AM04H)
-#define bfin_write_CAN1_AM04H(val) bfin_write16(CAN1_AM04H, val)
-#define bfin_read_CAN1_AM05L() bfin_read16(CAN1_AM05L)
-#define bfin_write_CAN1_AM05L(val) bfin_write16(CAN1_AM05L, val)
-#define bfin_read_CAN1_AM05H() bfin_read16(CAN1_AM05H)
-#define bfin_write_CAN1_AM05H(val) bfin_write16(CAN1_AM05H, val)
-#define bfin_read_CAN1_AM06L() bfin_read16(CAN1_AM06L)
-#define bfin_write_CAN1_AM06L(val) bfin_write16(CAN1_AM06L, val)
-#define bfin_read_CAN1_AM06H() bfin_read16(CAN1_AM06H)
-#define bfin_write_CAN1_AM06H(val) bfin_write16(CAN1_AM06H, val)
-#define bfin_read_CAN1_AM07L() bfin_read16(CAN1_AM07L)
-#define bfin_write_CAN1_AM07L(val) bfin_write16(CAN1_AM07L, val)
-#define bfin_read_CAN1_AM07H() bfin_read16(CAN1_AM07H)
-#define bfin_write_CAN1_AM07H(val) bfin_write16(CAN1_AM07H, val)
-#define bfin_read_CAN1_AM08L() bfin_read16(CAN1_AM08L)
-#define bfin_write_CAN1_AM08L(val) bfin_write16(CAN1_AM08L, val)
-#define bfin_read_CAN1_AM08H() bfin_read16(CAN1_AM08H)
-#define bfin_write_CAN1_AM08H(val) bfin_write16(CAN1_AM08H, val)
-#define bfin_read_CAN1_AM09L() bfin_read16(CAN1_AM09L)
-#define bfin_write_CAN1_AM09L(val) bfin_write16(CAN1_AM09L, val)
-#define bfin_read_CAN1_AM09H() bfin_read16(CAN1_AM09H)
-#define bfin_write_CAN1_AM09H(val) bfin_write16(CAN1_AM09H, val)
-#define bfin_read_CAN1_AM10L() bfin_read16(CAN1_AM10L)
-#define bfin_write_CAN1_AM10L(val) bfin_write16(CAN1_AM10L, val)
-#define bfin_read_CAN1_AM10H() bfin_read16(CAN1_AM10H)
-#define bfin_write_CAN1_AM10H(val) bfin_write16(CAN1_AM10H, val)
-#define bfin_read_CAN1_AM11L() bfin_read16(CAN1_AM11L)
-#define bfin_write_CAN1_AM11L(val) bfin_write16(CAN1_AM11L, val)
-#define bfin_read_CAN1_AM11H() bfin_read16(CAN1_AM11H)
-#define bfin_write_CAN1_AM11H(val) bfin_write16(CAN1_AM11H, val)
-#define bfin_read_CAN1_AM12L() bfin_read16(CAN1_AM12L)
-#define bfin_write_CAN1_AM12L(val) bfin_write16(CAN1_AM12L, val)
-#define bfin_read_CAN1_AM12H() bfin_read16(CAN1_AM12H)
-#define bfin_write_CAN1_AM12H(val) bfin_write16(CAN1_AM12H, val)
-#define bfin_read_CAN1_AM13L() bfin_read16(CAN1_AM13L)
-#define bfin_write_CAN1_AM13L(val) bfin_write16(CAN1_AM13L, val)
-#define bfin_read_CAN1_AM13H() bfin_read16(CAN1_AM13H)
-#define bfin_write_CAN1_AM13H(val) bfin_write16(CAN1_AM13H, val)
-#define bfin_read_CAN1_AM14L() bfin_read16(CAN1_AM14L)
-#define bfin_write_CAN1_AM14L(val) bfin_write16(CAN1_AM14L, val)
-#define bfin_read_CAN1_AM14H() bfin_read16(CAN1_AM14H)
-#define bfin_write_CAN1_AM14H(val) bfin_write16(CAN1_AM14H, val)
-#define bfin_read_CAN1_AM15L() bfin_read16(CAN1_AM15L)
-#define bfin_write_CAN1_AM15L(val) bfin_write16(CAN1_AM15L, val)
-#define bfin_read_CAN1_AM15H() bfin_read16(CAN1_AM15H)
-#define bfin_write_CAN1_AM15H(val) bfin_write16(CAN1_AM15H, val)
-
-/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */
-
-#define bfin_read_CAN1_AM16L() bfin_read16(CAN1_AM16L)
-#define bfin_write_CAN1_AM16L(val) bfin_write16(CAN1_AM16L, val)
-#define bfin_read_CAN1_AM16H() bfin_read16(CAN1_AM16H)
-#define bfin_write_CAN1_AM16H(val) bfin_write16(CAN1_AM16H, val)
-#define bfin_read_CAN1_AM17L() bfin_read16(CAN1_AM17L)
-#define bfin_write_CAN1_AM17L(val) bfin_write16(CAN1_AM17L, val)
-#define bfin_read_CAN1_AM17H() bfin_read16(CAN1_AM17H)
-#define bfin_write_CAN1_AM17H(val) bfin_write16(CAN1_AM17H, val)
-#define bfin_read_CAN1_AM18L() bfin_read16(CAN1_AM18L)
-#define bfin_write_CAN1_AM18L(val) bfin_write16(CAN1_AM18L, val)
-#define bfin_read_CAN1_AM18H() bfin_read16(CAN1_AM18H)
-#define bfin_write_CAN1_AM18H(val) bfin_write16(CAN1_AM18H, val)
-#define bfin_read_CAN1_AM19L() bfin_read16(CAN1_AM19L)
-#define bfin_write_CAN1_AM19L(val) bfin_write16(CAN1_AM19L, val)
-#define bfin_read_CAN1_AM19H() bfin_read16(CAN1_AM19H)
-#define bfin_write_CAN1_AM19H(val) bfin_write16(CAN1_AM19H, val)
-#define bfin_read_CAN1_AM20L() bfin_read16(CAN1_AM20L)
-#define bfin_write_CAN1_AM20L(val) bfin_write16(CAN1_AM20L, val)
-#define bfin_read_CAN1_AM20H() bfin_read16(CAN1_AM20H)
-#define bfin_write_CAN1_AM20H(val) bfin_write16(CAN1_AM20H, val)
-#define bfin_read_CAN1_AM21L() bfin_read16(CAN1_AM21L)
-#define bfin_write_CAN1_AM21L(val) bfin_write16(CAN1_AM21L, val)
-#define bfin_read_CAN1_AM21H() bfin_read16(CAN1_AM21H)
-#define bfin_write_CAN1_AM21H(val) bfin_write16(CAN1_AM21H, val)
-#define bfin_read_CAN1_AM22L() bfin_read16(CAN1_AM22L)
-#define bfin_write_CAN1_AM22L(val) bfin_write16(CAN1_AM22L, val)
-#define bfin_read_CAN1_AM22H() bfin_read16(CAN1_AM22H)
-#define bfin_write_CAN1_AM22H(val) bfin_write16(CAN1_AM22H, val)
-#define bfin_read_CAN1_AM23L() bfin_read16(CAN1_AM23L)
-#define bfin_write_CAN1_AM23L(val) bfin_write16(CAN1_AM23L, val)
-#define bfin_read_CAN1_AM23H() bfin_read16(CAN1_AM23H)
-#define bfin_write_CAN1_AM23H(val) bfin_write16(CAN1_AM23H, val)
-#define bfin_read_CAN1_AM24L() bfin_read16(CAN1_AM24L)
-#define bfin_write_CAN1_AM24L(val) bfin_write16(CAN1_AM24L, val)
-#define bfin_read_CAN1_AM24H() bfin_read16(CAN1_AM24H)
-#define bfin_write_CAN1_AM24H(val) bfin_write16(CAN1_AM24H, val)
-#define bfin_read_CAN1_AM25L() bfin_read16(CAN1_AM25L)
-#define bfin_write_CAN1_AM25L(val) bfin_write16(CAN1_AM25L, val)
-#define bfin_read_CAN1_AM25H() bfin_read16(CAN1_AM25H)
-#define bfin_write_CAN1_AM25H(val) bfin_write16(CAN1_AM25H, val)
-#define bfin_read_CAN1_AM26L() bfin_read16(CAN1_AM26L)
-#define bfin_write_CAN1_AM26L(val) bfin_write16(CAN1_AM26L, val)
-#define bfin_read_CAN1_AM26H() bfin_read16(CAN1_AM26H)
-#define bfin_write_CAN1_AM26H(val) bfin_write16(CAN1_AM26H, val)
-#define bfin_read_CAN1_AM27L() bfin_read16(CAN1_AM27L)
-#define bfin_write_CAN1_AM27L(val) bfin_write16(CAN1_AM27L, val)
-#define bfin_read_CAN1_AM27H() bfin_read16(CAN1_AM27H)
-#define bfin_write_CAN1_AM27H(val) bfin_write16(CAN1_AM27H, val)
-#define bfin_read_CAN1_AM28L() bfin_read16(CAN1_AM28L)
-#define bfin_write_CAN1_AM28L(val) bfin_write16(CAN1_AM28L, val)
-#define bfin_read_CAN1_AM28H() bfin_read16(CAN1_AM28H)
-#define bfin_write_CAN1_AM28H(val) bfin_write16(CAN1_AM28H, val)
-#define bfin_read_CAN1_AM29L() bfin_read16(CAN1_AM29L)
-#define bfin_write_CAN1_AM29L(val) bfin_write16(CAN1_AM29L, val)
-#define bfin_read_CAN1_AM29H() bfin_read16(CAN1_AM29H)
-#define bfin_write_CAN1_AM29H(val) bfin_write16(CAN1_AM29H, val)
-#define bfin_read_CAN1_AM30L() bfin_read16(CAN1_AM30L)
-#define bfin_write_CAN1_AM30L(val) bfin_write16(CAN1_AM30L, val)
-#define bfin_read_CAN1_AM30H() bfin_read16(CAN1_AM30H)
-#define bfin_write_CAN1_AM30H(val) bfin_write16(CAN1_AM30H, val)
-#define bfin_read_CAN1_AM31L() bfin_read16(CAN1_AM31L)
-#define bfin_write_CAN1_AM31L(val) bfin_write16(CAN1_AM31L, val)
-#define bfin_read_CAN1_AM31H() bfin_read16(CAN1_AM31H)
-#define bfin_write_CAN1_AM31H(val) bfin_write16(CAN1_AM31H, val)
-
-/* CAN Controller 1 Mailbox Data Registers */
-
-#define bfin_read_CAN1_MB00_DATA0() bfin_read16(CAN1_MB00_DATA0)
-#define bfin_write_CAN1_MB00_DATA0(val) bfin_write16(CAN1_MB00_DATA0, val)
-#define bfin_read_CAN1_MB00_DATA1() bfin_read16(CAN1_MB00_DATA1)
-#define bfin_write_CAN1_MB00_DATA1(val) bfin_write16(CAN1_MB00_DATA1, val)
-#define bfin_read_CAN1_MB00_DATA2() bfin_read16(CAN1_MB00_DATA2)
-#define bfin_write_CAN1_MB00_DATA2(val) bfin_write16(CAN1_MB00_DATA2, val)
-#define bfin_read_CAN1_MB00_DATA3() bfin_read16(CAN1_MB00_DATA3)
-#define bfin_write_CAN1_MB00_DATA3(val) bfin_write16(CAN1_MB00_DATA3, val)
-#define bfin_read_CAN1_MB00_LENGTH() bfin_read16(CAN1_MB00_LENGTH)
-#define bfin_write_CAN1_MB00_LENGTH(val) bfin_write16(CAN1_MB00_LENGTH, val)
-#define bfin_read_CAN1_MB00_TIMESTAMP() bfin_read16(CAN1_MB00_TIMESTAMP)
-#define bfin_write_CAN1_MB00_TIMESTAMP(val) bfin_write16(CAN1_MB00_TIMESTAMP, val)
-#define bfin_read_CAN1_MB00_ID0() bfin_read16(CAN1_MB00_ID0)
-#define bfin_write_CAN1_MB00_ID0(val) bfin_write16(CAN1_MB00_ID0, val)
-#define bfin_read_CAN1_MB00_ID1() bfin_read16(CAN1_MB00_ID1)
-#define bfin_write_CAN1_MB00_ID1(val) bfin_write16(CAN1_MB00_ID1, val)
-#define bfin_read_CAN1_MB01_DATA0() bfin_read16(CAN1_MB01_DATA0)
-#define bfin_write_CAN1_MB01_DATA0(val) bfin_write16(CAN1_MB01_DATA0, val)
-#define bfin_read_CAN1_MB01_DATA1() bfin_read16(CAN1_MB01_DATA1)
-#define bfin_write_CAN1_MB01_DATA1(val) bfin_write16(CAN1_MB01_DATA1, val)
-#define bfin_read_CAN1_MB01_DATA2() bfin_read16(CAN1_MB01_DATA2)
-#define bfin_write_CAN1_MB01_DATA2(val) bfin_write16(CAN1_MB01_DATA2, val)
-#define bfin_read_CAN1_MB01_DATA3() bfin_read16(CAN1_MB01_DATA3)
-#define bfin_write_CAN1_MB01_DATA3(val) bfin_write16(CAN1_MB01_DATA3, val)
-#define bfin_read_CAN1_MB01_LENGTH() bfin_read16(CAN1_MB01_LENGTH)
-#define bfin_write_CAN1_MB01_LENGTH(val) bfin_write16(CAN1_MB01_LENGTH, val)
-#define bfin_read_CAN1_MB01_TIMESTAMP() bfin_read16(CAN1_MB01_TIMESTAMP)
-#define bfin_write_CAN1_MB01_TIMESTAMP(val) bfin_write16(CAN1_MB01_TIMESTAMP, val)
-#define bfin_read_CAN1_MB01_ID0() bfin_read16(CAN1_MB01_ID0)
-#define bfin_write_CAN1_MB01_ID0(val) bfin_write16(CAN1_MB01_ID0, val)
-#define bfin_read_CAN1_MB01_ID1() bfin_read16(CAN1_MB01_ID1)
-#define bfin_write_CAN1_MB01_ID1(val) bfin_write16(CAN1_MB01_ID1, val)
-#define bfin_read_CAN1_MB02_DATA0() bfin_read16(CAN1_MB02_DATA0)
-#define bfin_write_CAN1_MB02_DATA0(val) bfin_write16(CAN1_MB02_DATA0, val)
-#define bfin_read_CAN1_MB02_DATA1() bfin_read16(CAN1_MB02_DATA1)
-#define bfin_write_CAN1_MB02_DATA1(val) bfin_write16(CAN1_MB02_DATA1, val)
-#define bfin_read_CAN1_MB02_DATA2() bfin_read16(CAN1_MB02_DATA2)
-#define bfin_write_CAN1_MB02_DATA2(val) bfin_write16(CAN1_MB02_DATA2, val)
-#define bfin_read_CAN1_MB02_DATA3() bfin_read16(CAN1_MB02_DATA3)
-#define bfin_write_CAN1_MB02_DATA3(val) bfin_write16(CAN1_MB02_DATA3, val)
-#define bfin_read_CAN1_MB02_LENGTH() bfin_read16(CAN1_MB02_LENGTH)
-#define bfin_write_CAN1_MB02_LENGTH(val) bfin_write16(CAN1_MB02_LENGTH, val)
-#define bfin_read_CAN1_MB02_TIMESTAMP() bfin_read16(CAN1_MB02_TIMESTAMP)
-#define bfin_write_CAN1_MB02_TIMESTAMP(val) bfin_write16(CAN1_MB02_TIMESTAMP, val)
-#define bfin_read_CAN1_MB02_ID0() bfin_read16(CAN1_MB02_ID0)
-#define bfin_write_CAN1_MB02_ID0(val) bfin_write16(CAN1_MB02_ID0, val)
-#define bfin_read_CAN1_MB02_ID1() bfin_read16(CAN1_MB02_ID1)
-#define bfin_write_CAN1_MB02_ID1(val) bfin_write16(CAN1_MB02_ID1, val)
-#define bfin_read_CAN1_MB03_DATA0() bfin_read16(CAN1_MB03_DATA0)
-#define bfin_write_CAN1_MB03_DATA0(val) bfin_write16(CAN1_MB03_DATA0, val)
-#define bfin_read_CAN1_MB03_DATA1() bfin_read16(CAN1_MB03_DATA1)
-#define bfin_write_CAN1_MB03_DATA1(val) bfin_write16(CAN1_MB03_DATA1, val)
-#define bfin_read_CAN1_MB03_DATA2() bfin_read16(CAN1_MB03_DATA2)
-#define bfin_write_CAN1_MB03_DATA2(val) bfin_write16(CAN1_MB03_DATA2, val)
-#define bfin_read_CAN1_MB03_DATA3() bfin_read16(CAN1_MB03_DATA3)
-#define bfin_write_CAN1_MB03_DATA3(val) bfin_write16(CAN1_MB03_DATA3, val)
-#define bfin_read_CAN1_MB03_LENGTH() bfin_read16(CAN1_MB03_LENGTH)
-#define bfin_write_CAN1_MB03_LENGTH(val) bfin_write16(CAN1_MB03_LENGTH, val)
-#define bfin_read_CAN1_MB03_TIMESTAMP() bfin_read16(CAN1_MB03_TIMESTAMP)
-#define bfin_write_CAN1_MB03_TIMESTAMP(val) bfin_write16(CAN1_MB03_TIMESTAMP, val)
-#define bfin_read_CAN1_MB03_ID0() bfin_read16(CAN1_MB03_ID0)
-#define bfin_write_CAN1_MB03_ID0(val) bfin_write16(CAN1_MB03_ID0, val)
-#define bfin_read_CAN1_MB03_ID1() bfin_read16(CAN1_MB03_ID1)
-#define bfin_write_CAN1_MB03_ID1(val) bfin_write16(CAN1_MB03_ID1, val)
-#define bfin_read_CAN1_MB04_DATA0() bfin_read16(CAN1_MB04_DATA0)
-#define bfin_write_CAN1_MB04_DATA0(val) bfin_write16(CAN1_MB04_DATA0, val)
-#define bfin_read_CAN1_MB04_DATA1() bfin_read16(CAN1_MB04_DATA1)
-#define bfin_write_CAN1_MB04_DATA1(val) bfin_write16(CAN1_MB04_DATA1, val)
-#define bfin_read_CAN1_MB04_DATA2() bfin_read16(CAN1_MB04_DATA2)
-#define bfin_write_CAN1_MB04_DATA2(val) bfin_write16(CAN1_MB04_DATA2, val)
-#define bfin_read_CAN1_MB04_DATA3() bfin_read16(CAN1_MB04_DATA3)
-#define bfin_write_CAN1_MB04_DATA3(val) bfin_write16(CAN1_MB04_DATA3, val)
-#define bfin_read_CAN1_MB04_LENGTH() bfin_read16(CAN1_MB04_LENGTH)
-#define bfin_write_CAN1_MB04_LENGTH(val) bfin_write16(CAN1_MB04_LENGTH, val)
-#define bfin_read_CAN1_MB04_TIMESTAMP() bfin_read16(CAN1_MB04_TIMESTAMP)
-#define bfin_write_CAN1_MB04_TIMESTAMP(val) bfin_write16(CAN1_MB04_TIMESTAMP, val)
-#define bfin_read_CAN1_MB04_ID0() bfin_read16(CAN1_MB04_ID0)
-#define bfin_write_CAN1_MB04_ID0(val) bfin_write16(CAN1_MB04_ID0, val)
-#define bfin_read_CAN1_MB04_ID1() bfin_read16(CAN1_MB04_ID1)
-#define bfin_write_CAN1_MB04_ID1(val) bfin_write16(CAN1_MB04_ID1, val)
-#define bfin_read_CAN1_MB05_DATA0() bfin_read16(CAN1_MB05_DATA0)
-#define bfin_write_CAN1_MB05_DATA0(val) bfin_write16(CAN1_MB05_DATA0, val)
-#define bfin_read_CAN1_MB05_DATA1() bfin_read16(CAN1_MB05_DATA1)
-#define bfin_write_CAN1_MB05_DATA1(val) bfin_write16(CAN1_MB05_DATA1, val)
-#define bfin_read_CAN1_MB05_DATA2() bfin_read16(CAN1_MB05_DATA2)
-#define bfin_write_CAN1_MB05_DATA2(val) bfin_write16(CAN1_MB05_DATA2, val)
-#define bfin_read_CAN1_MB05_DATA3() bfin_read16(CAN1_MB05_DATA3)
-#define bfin_write_CAN1_MB05_DATA3(val) bfin_write16(CAN1_MB05_DATA3, val)
-#define bfin_read_CAN1_MB05_LENGTH() bfin_read16(CAN1_MB05_LENGTH)
-#define bfin_write_CAN1_MB05_LENGTH(val) bfin_write16(CAN1_MB05_LENGTH, val)
-#define bfin_read_CAN1_MB05_TIMESTAMP() bfin_read16(CAN1_MB05_TIMESTAMP)
-#define bfin_write_CAN1_MB05_TIMESTAMP(val) bfin_write16(CAN1_MB05_TIMESTAMP, val)
-#define bfin_read_CAN1_MB05_ID0() bfin_read16(CAN1_MB05_ID0)
-#define bfin_write_CAN1_MB05_ID0(val) bfin_write16(CAN1_MB05_ID0, val)
-#define bfin_read_CAN1_MB05_ID1() bfin_read16(CAN1_MB05_ID1)
-#define bfin_write_CAN1_MB05_ID1(val) bfin_write16(CAN1_MB05_ID1, val)
-#define bfin_read_CAN1_MB06_DATA0() bfin_read16(CAN1_MB06_DATA0)
-#define bfin_write_CAN1_MB06_DATA0(val) bfin_write16(CAN1_MB06_DATA0, val)
-#define bfin_read_CAN1_MB06_DATA1() bfin_read16(CAN1_MB06_DATA1)
-#define bfin_write_CAN1_MB06_DATA1(val) bfin_write16(CAN1_MB06_DATA1, val)
-#define bfin_read_CAN1_MB06_DATA2() bfin_read16(CAN1_MB06_DATA2)
-#define bfin_write_CAN1_MB06_DATA2(val) bfin_write16(CAN1_MB06_DATA2, val)
-#define bfin_read_CAN1_MB06_DATA3() bfin_read16(CAN1_MB06_DATA3)
-#define bfin_write_CAN1_MB06_DATA3(val) bfin_write16(CAN1_MB06_DATA3, val)
-#define bfin_read_CAN1_MB06_LENGTH() bfin_read16(CAN1_MB06_LENGTH)
-#define bfin_write_CAN1_MB06_LENGTH(val) bfin_write16(CAN1_MB06_LENGTH, val)
-#define bfin_read_CAN1_MB06_TIMESTAMP() bfin_read16(CAN1_MB06_TIMESTAMP)
-#define bfin_write_CAN1_MB06_TIMESTAMP(val) bfin_write16(CAN1_MB06_TIMESTAMP, val)
-#define bfin_read_CAN1_MB06_ID0() bfin_read16(CAN1_MB06_ID0)
-#define bfin_write_CAN1_MB06_ID0(val) bfin_write16(CAN1_MB06_ID0, val)
-#define bfin_read_CAN1_MB06_ID1() bfin_read16(CAN1_MB06_ID1)
-#define bfin_write_CAN1_MB06_ID1(val) bfin_write16(CAN1_MB06_ID1, val)
-#define bfin_read_CAN1_MB07_DATA0() bfin_read16(CAN1_MB07_DATA0)
-#define bfin_write_CAN1_MB07_DATA0(val) bfin_write16(CAN1_MB07_DATA0, val)
-#define bfin_read_CAN1_MB07_DATA1() bfin_read16(CAN1_MB07_DATA1)
-#define bfin_write_CAN1_MB07_DATA1(val) bfin_write16(CAN1_MB07_DATA1, val)
-#define bfin_read_CAN1_MB07_DATA2() bfin_read16(CAN1_MB07_DATA2)
-#define bfin_write_CAN1_MB07_DATA2(val) bfin_write16(CAN1_MB07_DATA2, val)
-#define bfin_read_CAN1_MB07_DATA3() bfin_read16(CAN1_MB07_DATA3)
-#define bfin_write_CAN1_MB07_DATA3(val) bfin_write16(CAN1_MB07_DATA3, val)
-#define bfin_read_CAN1_MB07_LENGTH() bfin_read16(CAN1_MB07_LENGTH)
-#define bfin_write_CAN1_MB07_LENGTH(val) bfin_write16(CAN1_MB07_LENGTH, val)
-#define bfin_read_CAN1_MB07_TIMESTAMP() bfin_read16(CAN1_MB07_TIMESTAMP)
-#define bfin_write_CAN1_MB07_TIMESTAMP(val) bfin_write16(CAN1_MB07_TIMESTAMP, val)
-#define bfin_read_CAN1_MB07_ID0() bfin_read16(CAN1_MB07_ID0)
-#define bfin_write_CAN1_MB07_ID0(val) bfin_write16(CAN1_MB07_ID0, val)
-#define bfin_read_CAN1_MB07_ID1() bfin_read16(CAN1_MB07_ID1)
-#define bfin_write_CAN1_MB07_ID1(val) bfin_write16(CAN1_MB07_ID1, val)
-#define bfin_read_CAN1_MB08_DATA0() bfin_read16(CAN1_MB08_DATA0)
-#define bfin_write_CAN1_MB08_DATA0(val) bfin_write16(CAN1_MB08_DATA0, val)
-#define bfin_read_CAN1_MB08_DATA1() bfin_read16(CAN1_MB08_DATA1)
-#define bfin_write_CAN1_MB08_DATA1(val) bfin_write16(CAN1_MB08_DATA1, val)
-#define bfin_read_CAN1_MB08_DATA2() bfin_read16(CAN1_MB08_DATA2)
-#define bfin_write_CAN1_MB08_DATA2(val) bfin_write16(CAN1_MB08_DATA2, val)
-#define bfin_read_CAN1_MB08_DATA3() bfin_read16(CAN1_MB08_DATA3)
-#define bfin_write_CAN1_MB08_DATA3(val) bfin_write16(CAN1_MB08_DATA3, val)
-#define bfin_read_CAN1_MB08_LENGTH() bfin_read16(CAN1_MB08_LENGTH)
-#define bfin_write_CAN1_MB08_LENGTH(val) bfin_write16(CAN1_MB08_LENGTH, val)
-#define bfin_read_CAN1_MB08_TIMESTAMP() bfin_read16(CAN1_MB08_TIMESTAMP)
-#define bfin_write_CAN1_MB08_TIMESTAMP(val) bfin_write16(CAN1_MB08_TIMESTAMP, val)
-#define bfin_read_CAN1_MB08_ID0() bfin_read16(CAN1_MB08_ID0)
-#define bfin_write_CAN1_MB08_ID0(val) bfin_write16(CAN1_MB08_ID0, val)
-#define bfin_read_CAN1_MB08_ID1() bfin_read16(CAN1_MB08_ID1)
-#define bfin_write_CAN1_MB08_ID1(val) bfin_write16(CAN1_MB08_ID1, val)
-#define bfin_read_CAN1_MB09_DATA0() bfin_read16(CAN1_MB09_DATA0)
-#define bfin_write_CAN1_MB09_DATA0(val) bfin_write16(CAN1_MB09_DATA0, val)
-#define bfin_read_CAN1_MB09_DATA1() bfin_read16(CAN1_MB09_DATA1)
-#define bfin_write_CAN1_MB09_DATA1(val) bfin_write16(CAN1_MB09_DATA1, val)
-#define bfin_read_CAN1_MB09_DATA2() bfin_read16(CAN1_MB09_DATA2)
-#define bfin_write_CAN1_MB09_DATA2(val) bfin_write16(CAN1_MB09_DATA2, val)
-#define bfin_read_CAN1_MB09_DATA3() bfin_read16(CAN1_MB09_DATA3)
-#define bfin_write_CAN1_MB09_DATA3(val) bfin_write16(CAN1_MB09_DATA3, val)
-#define bfin_read_CAN1_MB09_LENGTH() bfin_read16(CAN1_MB09_LENGTH)
-#define bfin_write_CAN1_MB09_LENGTH(val) bfin_write16(CAN1_MB09_LENGTH, val)
-#define bfin_read_CAN1_MB09_TIMESTAMP() bfin_read16(CAN1_MB09_TIMESTAMP)
-#define bfin_write_CAN1_MB09_TIMESTAMP(val) bfin_write16(CAN1_MB09_TIMESTAMP, val)
-#define bfin_read_CAN1_MB09_ID0() bfin_read16(CAN1_MB09_ID0)
-#define bfin_write_CAN1_MB09_ID0(val) bfin_write16(CAN1_MB09_ID0, val)
-#define bfin_read_CAN1_MB09_ID1() bfin_read16(CAN1_MB09_ID1)
-#define bfin_write_CAN1_MB09_ID1(val) bfin_write16(CAN1_MB09_ID1, val)
-#define bfin_read_CAN1_MB10_DATA0() bfin_read16(CAN1_MB10_DATA0)
-#define bfin_write_CAN1_MB10_DATA0(val) bfin_write16(CAN1_MB10_DATA0, val)
-#define bfin_read_CAN1_MB10_DATA1() bfin_read16(CAN1_MB10_DATA1)
-#define bfin_write_CAN1_MB10_DATA1(val) bfin_write16(CAN1_MB10_DATA1, val)
-#define bfin_read_CAN1_MB10_DATA2() bfin_read16(CAN1_MB10_DATA2)
-#define bfin_write_CAN1_MB10_DATA2(val) bfin_write16(CAN1_MB10_DATA2, val)
-#define bfin_read_CAN1_MB10_DATA3() bfin_read16(CAN1_MB10_DATA3)
-#define bfin_write_CAN1_MB10_DATA3(val) bfin_write16(CAN1_MB10_DATA3, val)
-#define bfin_read_CAN1_MB10_LENGTH() bfin_read16(CAN1_MB10_LENGTH)
-#define bfin_write_CAN1_MB10_LENGTH(val) bfin_write16(CAN1_MB10_LENGTH, val)
-#define bfin_read_CAN1_MB10_TIMESTAMP() bfin_read16(CAN1_MB10_TIMESTAMP)
-#define bfin_write_CAN1_MB10_TIMESTAMP(val) bfin_write16(CAN1_MB10_TIMESTAMP, val)
-#define bfin_read_CAN1_MB10_ID0() bfin_read16(CAN1_MB10_ID0)
-#define bfin_write_CAN1_MB10_ID0(val) bfin_write16(CAN1_MB10_ID0, val)
-#define bfin_read_CAN1_MB10_ID1() bfin_read16(CAN1_MB10_ID1)
-#define bfin_write_CAN1_MB10_ID1(val) bfin_write16(CAN1_MB10_ID1, val)
-#define bfin_read_CAN1_MB11_DATA0() bfin_read16(CAN1_MB11_DATA0)
-#define bfin_write_CAN1_MB11_DATA0(val) bfin_write16(CAN1_MB11_DATA0, val)
-#define bfin_read_CAN1_MB11_DATA1() bfin_read16(CAN1_MB11_DATA1)
-#define bfin_write_CAN1_MB11_DATA1(val) bfin_write16(CAN1_MB11_DATA1, val)
-#define bfin_read_CAN1_MB11_DATA2() bfin_read16(CAN1_MB11_DATA2)
-#define bfin_write_CAN1_MB11_DATA2(val) bfin_write16(CAN1_MB11_DATA2, val)
-#define bfin_read_CAN1_MB11_DATA3() bfin_read16(CAN1_MB11_DATA3)
-#define bfin_write_CAN1_MB11_DATA3(val) bfin_write16(CAN1_MB11_DATA3, val)
-#define bfin_read_CAN1_MB11_LENGTH() bfin_read16(CAN1_MB11_LENGTH)
-#define bfin_write_CAN1_MB11_LENGTH(val) bfin_write16(CAN1_MB11_LENGTH, val)
-#define bfin_read_CAN1_MB11_TIMESTAMP() bfin_read16(CAN1_MB11_TIMESTAMP)
-#define bfin_write_CAN1_MB11_TIMESTAMP(val) bfin_write16(CAN1_MB11_TIMESTAMP, val)
-#define bfin_read_CAN1_MB11_ID0() bfin_read16(CAN1_MB11_ID0)
-#define bfin_write_CAN1_MB11_ID0(val) bfin_write16(CAN1_MB11_ID0, val)
-#define bfin_read_CAN1_MB11_ID1() bfin_read16(CAN1_MB11_ID1)
-#define bfin_write_CAN1_MB11_ID1(val) bfin_write16(CAN1_MB11_ID1, val)
-#define bfin_read_CAN1_MB12_DATA0() bfin_read16(CAN1_MB12_DATA0)
-#define bfin_write_CAN1_MB12_DATA0(val) bfin_write16(CAN1_MB12_DATA0, val)
-#define bfin_read_CAN1_MB12_DATA1() bfin_read16(CAN1_MB12_DATA1)
-#define bfin_write_CAN1_MB12_DATA1(val) bfin_write16(CAN1_MB12_DATA1, val)
-#define bfin_read_CAN1_MB12_DATA2() bfin_read16(CAN1_MB12_DATA2)
-#define bfin_write_CAN1_MB12_DATA2(val) bfin_write16(CAN1_MB12_DATA2, val)
-#define bfin_read_CAN1_MB12_DATA3() bfin_read16(CAN1_MB12_DATA3)
-#define bfin_write_CAN1_MB12_DATA3(val) bfin_write16(CAN1_MB12_DATA3, val)
-#define bfin_read_CAN1_MB12_LENGTH() bfin_read16(CAN1_MB12_LENGTH)
-#define bfin_write_CAN1_MB12_LENGTH(val) bfin_write16(CAN1_MB12_LENGTH, val)
-#define bfin_read_CAN1_MB12_TIMESTAMP() bfin_read16(CAN1_MB12_TIMESTAMP)
-#define bfin_write_CAN1_MB12_TIMESTAMP(val) bfin_write16(CAN1_MB12_TIMESTAMP, val)
-#define bfin_read_CAN1_MB12_ID0() bfin_read16(CAN1_MB12_ID0)
-#define bfin_write_CAN1_MB12_ID0(val) bfin_write16(CAN1_MB12_ID0, val)
-#define bfin_read_CAN1_MB12_ID1() bfin_read16(CAN1_MB12_ID1)
-#define bfin_write_CAN1_MB12_ID1(val) bfin_write16(CAN1_MB12_ID1, val)
-#define bfin_read_CAN1_MB13_DATA0() bfin_read16(CAN1_MB13_DATA0)
-#define bfin_write_CAN1_MB13_DATA0(val) bfin_write16(CAN1_MB13_DATA0, val)
-#define bfin_read_CAN1_MB13_DATA1() bfin_read16(CAN1_MB13_DATA1)
-#define bfin_write_CAN1_MB13_DATA1(val) bfin_write16(CAN1_MB13_DATA1, val)
-#define bfin_read_CAN1_MB13_DATA2() bfin_read16(CAN1_MB13_DATA2)
-#define bfin_write_CAN1_MB13_DATA2(val) bfin_write16(CAN1_MB13_DATA2, val)
-#define bfin_read_CAN1_MB13_DATA3() bfin_read16(CAN1_MB13_DATA3)
-#define bfin_write_CAN1_MB13_DATA3(val) bfin_write16(CAN1_MB13_DATA3, val)
-#define bfin_read_CAN1_MB13_LENGTH() bfin_read16(CAN1_MB13_LENGTH)
-#define bfin_write_CAN1_MB13_LENGTH(val) bfin_write16(CAN1_MB13_LENGTH, val)
-#define bfin_read_CAN1_MB13_TIMESTAMP() bfin_read16(CAN1_MB13_TIMESTAMP)
-#define bfin_write_CAN1_MB13_TIMESTAMP(val) bfin_write16(CAN1_MB13_TIMESTAMP, val)
-#define bfin_read_CAN1_MB13_ID0() bfin_read16(CAN1_MB13_ID0)
-#define bfin_write_CAN1_MB13_ID0(val) bfin_write16(CAN1_MB13_ID0, val)
-#define bfin_read_CAN1_MB13_ID1() bfin_read16(CAN1_MB13_ID1)
-#define bfin_write_CAN1_MB13_ID1(val) bfin_write16(CAN1_MB13_ID1, val)
-#define bfin_read_CAN1_MB14_DATA0() bfin_read16(CAN1_MB14_DATA0)
-#define bfin_write_CAN1_MB14_DATA0(val) bfin_write16(CAN1_MB14_DATA0, val)
-#define bfin_read_CAN1_MB14_DATA1() bfin_read16(CAN1_MB14_DATA1)
-#define bfin_write_CAN1_MB14_DATA1(val) bfin_write16(CAN1_MB14_DATA1, val)
-#define bfin_read_CAN1_MB14_DATA2() bfin_read16(CAN1_MB14_DATA2)
-#define bfin_write_CAN1_MB14_DATA2(val) bfin_write16(CAN1_MB14_DATA2, val)
-#define bfin_read_CAN1_MB14_DATA3() bfin_read16(CAN1_MB14_DATA3)
-#define bfin_write_CAN1_MB14_DATA3(val) bfin_write16(CAN1_MB14_DATA3, val)
-#define bfin_read_CAN1_MB14_LENGTH() bfin_read16(CAN1_MB14_LENGTH)
-#define bfin_write_CAN1_MB14_LENGTH(val) bfin_write16(CAN1_MB14_LENGTH, val)
-#define bfin_read_CAN1_MB14_TIMESTAMP() bfin_read16(CAN1_MB14_TIMESTAMP)
-#define bfin_write_CAN1_MB14_TIMESTAMP(val) bfin_write16(CAN1_MB14_TIMESTAMP, val)
-#define bfin_read_CAN1_MB14_ID0() bfin_read16(CAN1_MB14_ID0)
-#define bfin_write_CAN1_MB14_ID0(val) bfin_write16(CAN1_MB14_ID0, val)
-#define bfin_read_CAN1_MB14_ID1() bfin_read16(CAN1_MB14_ID1)
-#define bfin_write_CAN1_MB14_ID1(val) bfin_write16(CAN1_MB14_ID1, val)
-#define bfin_read_CAN1_MB15_DATA0() bfin_read16(CAN1_MB15_DATA0)
-#define bfin_write_CAN1_MB15_DATA0(val) bfin_write16(CAN1_MB15_DATA0, val)
-#define bfin_read_CAN1_MB15_DATA1() bfin_read16(CAN1_MB15_DATA1)
-#define bfin_write_CAN1_MB15_DATA1(val) bfin_write16(CAN1_MB15_DATA1, val)
-#define bfin_read_CAN1_MB15_DATA2() bfin_read16(CAN1_MB15_DATA2)
-#define bfin_write_CAN1_MB15_DATA2(val) bfin_write16(CAN1_MB15_DATA2, val)
-#define bfin_read_CAN1_MB15_DATA3() bfin_read16(CAN1_MB15_DATA3)
-#define bfin_write_CAN1_MB15_DATA3(val) bfin_write16(CAN1_MB15_DATA3, val)
-#define bfin_read_CAN1_MB15_LENGTH() bfin_read16(CAN1_MB15_LENGTH)
-#define bfin_write_CAN1_MB15_LENGTH(val) bfin_write16(CAN1_MB15_LENGTH, val)
-#define bfin_read_CAN1_MB15_TIMESTAMP() bfin_read16(CAN1_MB15_TIMESTAMP)
-#define bfin_write_CAN1_MB15_TIMESTAMP(val) bfin_write16(CAN1_MB15_TIMESTAMP, val)
-#define bfin_read_CAN1_MB15_ID0() bfin_read16(CAN1_MB15_ID0)
-#define bfin_write_CAN1_MB15_ID0(val) bfin_write16(CAN1_MB15_ID0, val)
-#define bfin_read_CAN1_MB15_ID1() bfin_read16(CAN1_MB15_ID1)
-#define bfin_write_CAN1_MB15_ID1(val) bfin_write16(CAN1_MB15_ID1, val)
-
-/* CAN Controller 1 Mailbox Data Registers */
-
-#define bfin_read_CAN1_MB16_DATA0() bfin_read16(CAN1_MB16_DATA0)
-#define bfin_write_CAN1_MB16_DATA0(val) bfin_write16(CAN1_MB16_DATA0, val)
-#define bfin_read_CAN1_MB16_DATA1() bfin_read16(CAN1_MB16_DATA1)
-#define bfin_write_CAN1_MB16_DATA1(val) bfin_write16(CAN1_MB16_DATA1, val)
-#define bfin_read_CAN1_MB16_DATA2() bfin_read16(CAN1_MB16_DATA2)
-#define bfin_write_CAN1_MB16_DATA2(val) bfin_write16(CAN1_MB16_DATA2, val)
-#define bfin_read_CAN1_MB16_DATA3() bfin_read16(CAN1_MB16_DATA3)
-#define bfin_write_CAN1_MB16_DATA3(val) bfin_write16(CAN1_MB16_DATA3, val)
-#define bfin_read_CAN1_MB16_LENGTH() bfin_read16(CAN1_MB16_LENGTH)
-#define bfin_write_CAN1_MB16_LENGTH(val) bfin_write16(CAN1_MB16_LENGTH, val)
-#define bfin_read_CAN1_MB16_TIMESTAMP() bfin_read16(CAN1_MB16_TIMESTAMP)
-#define bfin_write_CAN1_MB16_TIMESTAMP(val) bfin_write16(CAN1_MB16_TIMESTAMP, val)
-#define bfin_read_CAN1_MB16_ID0() bfin_read16(CAN1_MB16_ID0)
-#define bfin_write_CAN1_MB16_ID0(val) bfin_write16(CAN1_MB16_ID0, val)
-#define bfin_read_CAN1_MB16_ID1() bfin_read16(CAN1_MB16_ID1)
-#define bfin_write_CAN1_MB16_ID1(val) bfin_write16(CAN1_MB16_ID1, val)
-#define bfin_read_CAN1_MB17_DATA0() bfin_read16(CAN1_MB17_DATA0)
-#define bfin_write_CAN1_MB17_DATA0(val) bfin_write16(CAN1_MB17_DATA0, val)
-#define bfin_read_CAN1_MB17_DATA1() bfin_read16(CAN1_MB17_DATA1)
-#define bfin_write_CAN1_MB17_DATA1(val) bfin_write16(CAN1_MB17_DATA1, val)
-#define bfin_read_CAN1_MB17_DATA2() bfin_read16(CAN1_MB17_DATA2)
-#define bfin_write_CAN1_MB17_DATA2(val) bfin_write16(CAN1_MB17_DATA2, val)
-#define bfin_read_CAN1_MB17_DATA3() bfin_read16(CAN1_MB17_DATA3)
-#define bfin_write_CAN1_MB17_DATA3(val) bfin_write16(CAN1_MB17_DATA3, val)
-#define bfin_read_CAN1_MB17_LENGTH() bfin_read16(CAN1_MB17_LENGTH)
-#define bfin_write_CAN1_MB17_LENGTH(val) bfin_write16(CAN1_MB17_LENGTH, val)
-#define bfin_read_CAN1_MB17_TIMESTAMP() bfin_read16(CAN1_MB17_TIMESTAMP)
-#define bfin_write_CAN1_MB17_TIMESTAMP(val) bfin_write16(CAN1_MB17_TIMESTAMP, val)
-#define bfin_read_CAN1_MB17_ID0() bfin_read16(CAN1_MB17_ID0)
-#define bfin_write_CAN1_MB17_ID0(val) bfin_write16(CAN1_MB17_ID0, val)
-#define bfin_read_CAN1_MB17_ID1() bfin_read16(CAN1_MB17_ID1)
-#define bfin_write_CAN1_MB17_ID1(val) bfin_write16(CAN1_MB17_ID1, val)
-#define bfin_read_CAN1_MB18_DATA0() bfin_read16(CAN1_MB18_DATA0)
-#define bfin_write_CAN1_MB18_DATA0(val) bfin_write16(CAN1_MB18_DATA0, val)
-#define bfin_read_CAN1_MB18_DATA1() bfin_read16(CAN1_MB18_DATA1)
-#define bfin_write_CAN1_MB18_DATA1(val) bfin_write16(CAN1_MB18_DATA1, val)
-#define bfin_read_CAN1_MB18_DATA2() bfin_read16(CAN1_MB18_DATA2)
-#define bfin_write_CAN1_MB18_DATA2(val) bfin_write16(CAN1_MB18_DATA2, val)
-#define bfin_read_CAN1_MB18_DATA3() bfin_read16(CAN1_MB18_DATA3)
-#define bfin_write_CAN1_MB18_DATA3(val) bfin_write16(CAN1_MB18_DATA3, val)
-#define bfin_read_CAN1_MB18_LENGTH() bfin_read16(CAN1_MB18_LENGTH)
-#define bfin_write_CAN1_MB18_LENGTH(val) bfin_write16(CAN1_MB18_LENGTH, val)
-#define bfin_read_CAN1_MB18_TIMESTAMP() bfin_read16(CAN1_MB18_TIMESTAMP)
-#define bfin_write_CAN1_MB18_TIMESTAMP(val) bfin_write16(CAN1_MB18_TIMESTAMP, val)
-#define bfin_read_CAN1_MB18_ID0() bfin_read16(CAN1_MB18_ID0)
-#define bfin_write_CAN1_MB18_ID0(val) bfin_write16(CAN1_MB18_ID0, val)
-#define bfin_read_CAN1_MB18_ID1() bfin_read16(CAN1_MB18_ID1)
-#define bfin_write_CAN1_MB18_ID1(val) bfin_write16(CAN1_MB18_ID1, val)
-#define bfin_read_CAN1_MB19_DATA0() bfin_read16(CAN1_MB19_DATA0)
-#define bfin_write_CAN1_MB19_DATA0(val) bfin_write16(CAN1_MB19_DATA0, val)
-#define bfin_read_CAN1_MB19_DATA1() bfin_read16(CAN1_MB19_DATA1)
-#define bfin_write_CAN1_MB19_DATA1(val) bfin_write16(CAN1_MB19_DATA1, val)
-#define bfin_read_CAN1_MB19_DATA2() bfin_read16(CAN1_MB19_DATA2)
-#define bfin_write_CAN1_MB19_DATA2(val) bfin_write16(CAN1_MB19_DATA2, val)
-#define bfin_read_CAN1_MB19_DATA3() bfin_read16(CAN1_MB19_DATA3)
-#define bfin_write_CAN1_MB19_DATA3(val) bfin_write16(CAN1_MB19_DATA3, val)
-#define bfin_read_CAN1_MB19_LENGTH() bfin_read16(CAN1_MB19_LENGTH)
-#define bfin_write_CAN1_MB19_LENGTH(val) bfin_write16(CAN1_MB19_LENGTH, val)
-#define bfin_read_CAN1_MB19_TIMESTAMP() bfin_read16(CAN1_MB19_TIMESTAMP)
-#define bfin_write_CAN1_MB19_TIMESTAMP(val) bfin_write16(CAN1_MB19_TIMESTAMP, val)
-#define bfin_read_CAN1_MB19_ID0() bfin_read16(CAN1_MB19_ID0)
-#define bfin_write_CAN1_MB19_ID0(val) bfin_write16(CAN1_MB19_ID0, val)
-#define bfin_read_CAN1_MB19_ID1() bfin_read16(CAN1_MB19_ID1)
-#define bfin_write_CAN1_MB19_ID1(val) bfin_write16(CAN1_MB19_ID1, val)
-#define bfin_read_CAN1_MB20_DATA0() bfin_read16(CAN1_MB20_DATA0)
-#define bfin_write_CAN1_MB20_DATA0(val) bfin_write16(CAN1_MB20_DATA0, val)
-#define bfin_read_CAN1_MB20_DATA1() bfin_read16(CAN1_MB20_DATA1)
-#define bfin_write_CAN1_MB20_DATA1(val) bfin_write16(CAN1_MB20_DATA1, val)
-#define bfin_read_CAN1_MB20_DATA2() bfin_read16(CAN1_MB20_DATA2)
-#define bfin_write_CAN1_MB20_DATA2(val) bfin_write16(CAN1_MB20_DATA2, val)
-#define bfin_read_CAN1_MB20_DATA3() bfin_read16(CAN1_MB20_DATA3)
-#define bfin_write_CAN1_MB20_DATA3(val) bfin_write16(CAN1_MB20_DATA3, val)
-#define bfin_read_CAN1_MB20_LENGTH() bfin_read16(CAN1_MB20_LENGTH)
-#define bfin_write_CAN1_MB20_LENGTH(val) bfin_write16(CAN1_MB20_LENGTH, val)
-#define bfin_read_CAN1_MB20_TIMESTAMP() bfin_read16(CAN1_MB20_TIMESTAMP)
-#define bfin_write_CAN1_MB20_TIMESTAMP(val) bfin_write16(CAN1_MB20_TIMESTAMP, val)
-#define bfin_read_CAN1_MB20_ID0() bfin_read16(CAN1_MB20_ID0)
-#define bfin_write_CAN1_MB20_ID0(val) bfin_write16(CAN1_MB20_ID0, val)
-#define bfin_read_CAN1_MB20_ID1() bfin_read16(CAN1_MB20_ID1)
-#define bfin_write_CAN1_MB20_ID1(val) bfin_write16(CAN1_MB20_ID1, val)
-#define bfin_read_CAN1_MB21_DATA0() bfin_read16(CAN1_MB21_DATA0)
-#define bfin_write_CAN1_MB21_DATA0(val) bfin_write16(CAN1_MB21_DATA0, val)
-#define bfin_read_CAN1_MB21_DATA1() bfin_read16(CAN1_MB21_DATA1)
-#define bfin_write_CAN1_MB21_DATA1(val) bfin_write16(CAN1_MB21_DATA1, val)
-#define bfin_read_CAN1_MB21_DATA2() bfin_read16(CAN1_MB21_DATA2)
-#define bfin_write_CAN1_MB21_DATA2(val) bfin_write16(CAN1_MB21_DATA2, val)
-#define bfin_read_CAN1_MB21_DATA3() bfin_read16(CAN1_MB21_DATA3)
-#define bfin_write_CAN1_MB21_DATA3(val) bfin_write16(CAN1_MB21_DATA3, val)
-#define bfin_read_CAN1_MB21_LENGTH() bfin_read16(CAN1_MB21_LENGTH)
-#define bfin_write_CAN1_MB21_LENGTH(val) bfin_write16(CAN1_MB21_LENGTH, val)
-#define bfin_read_CAN1_MB21_TIMESTAMP() bfin_read16(CAN1_MB21_TIMESTAMP)
-#define bfin_write_CAN1_MB21_TIMESTAMP(val) bfin_write16(CAN1_MB21_TIMESTAMP, val)
-#define bfin_read_CAN1_MB21_ID0() bfin_read16(CAN1_MB21_ID0)
-#define bfin_write_CAN1_MB21_ID0(val) bfin_write16(CAN1_MB21_ID0, val)
-#define bfin_read_CAN1_MB21_ID1() bfin_read16(CAN1_MB21_ID1)
-#define bfin_write_CAN1_MB21_ID1(val) bfin_write16(CAN1_MB21_ID1, val)
-#define bfin_read_CAN1_MB22_DATA0() bfin_read16(CAN1_MB22_DATA0)
-#define bfin_write_CAN1_MB22_DATA0(val) bfin_write16(CAN1_MB22_DATA0, val)
-#define bfin_read_CAN1_MB22_DATA1() bfin_read16(CAN1_MB22_DATA1)
-#define bfin_write_CAN1_MB22_DATA1(val) bfin_write16(CAN1_MB22_DATA1, val)
-#define bfin_read_CAN1_MB22_DATA2() bfin_read16(CAN1_MB22_DATA2)
-#define bfin_write_CAN1_MB22_DATA2(val) bfin_write16(CAN1_MB22_DATA2, val)
-#define bfin_read_CAN1_MB22_DATA3() bfin_read16(CAN1_MB22_DATA3)
-#define bfin_write_CAN1_MB22_DATA3(val) bfin_write16(CAN1_MB22_DATA3, val)
-#define bfin_read_CAN1_MB22_LENGTH() bfin_read16(CAN1_MB22_LENGTH)
-#define bfin_write_CAN1_MB22_LENGTH(val) bfin_write16(CAN1_MB22_LENGTH, val)
-#define bfin_read_CAN1_MB22_TIMESTAMP() bfin_read16(CAN1_MB22_TIMESTAMP)
-#define bfin_write_CAN1_MB22_TIMESTAMP(val) bfin_write16(CAN1_MB22_TIMESTAMP, val)
-#define bfin_read_CAN1_MB22_ID0() bfin_read16(CAN1_MB22_ID0)
-#define bfin_write_CAN1_MB22_ID0(val) bfin_write16(CAN1_MB22_ID0, val)
-#define bfin_read_CAN1_MB22_ID1() bfin_read16(CAN1_MB22_ID1)
-#define bfin_write_CAN1_MB22_ID1(val) bfin_write16(CAN1_MB22_ID1, val)
-#define bfin_read_CAN1_MB23_DATA0() bfin_read16(CAN1_MB23_DATA0)
-#define bfin_write_CAN1_MB23_DATA0(val) bfin_write16(CAN1_MB23_DATA0, val)
-#define bfin_read_CAN1_MB23_DATA1() bfin_read16(CAN1_MB23_DATA1)
-#define bfin_write_CAN1_MB23_DATA1(val) bfin_write16(CAN1_MB23_DATA1, val)
-#define bfin_read_CAN1_MB23_DATA2() bfin_read16(CAN1_MB23_DATA2)
-#define bfin_write_CAN1_MB23_DATA2(val) bfin_write16(CAN1_MB23_DATA2, val)
-#define bfin_read_CAN1_MB23_DATA3() bfin_read16(CAN1_MB23_DATA3)
-#define bfin_write_CAN1_MB23_DATA3(val) bfin_write16(CAN1_MB23_DATA3, val)
-#define bfin_read_CAN1_MB23_LENGTH() bfin_read16(CAN1_MB23_LENGTH)
-#define bfin_write_CAN1_MB23_LENGTH(val) bfin_write16(CAN1_MB23_LENGTH, val)
-#define bfin_read_CAN1_MB23_TIMESTAMP() bfin_read16(CAN1_MB23_TIMESTAMP)
-#define bfin_write_CAN1_MB23_TIMESTAMP(val) bfin_write16(CAN1_MB23_TIMESTAMP, val)
-#define bfin_read_CAN1_MB23_ID0() bfin_read16(CAN1_MB23_ID0)
-#define bfin_write_CAN1_MB23_ID0(val) bfin_write16(CAN1_MB23_ID0, val)
-#define bfin_read_CAN1_MB23_ID1() bfin_read16(CAN1_MB23_ID1)
-#define bfin_write_CAN1_MB23_ID1(val) bfin_write16(CAN1_MB23_ID1, val)
-#define bfin_read_CAN1_MB24_DATA0() bfin_read16(CAN1_MB24_DATA0)
-#define bfin_write_CAN1_MB24_DATA0(val) bfin_write16(CAN1_MB24_DATA0, val)
-#define bfin_read_CAN1_MB24_DATA1() bfin_read16(CAN1_MB24_DATA1)
-#define bfin_write_CAN1_MB24_DATA1(val) bfin_write16(CAN1_MB24_DATA1, val)
-#define bfin_read_CAN1_MB24_DATA2() bfin_read16(CAN1_MB24_DATA2)
-#define bfin_write_CAN1_MB24_DATA2(val) bfin_write16(CAN1_MB24_DATA2, val)
-#define bfin_read_CAN1_MB24_DATA3() bfin_read16(CAN1_MB24_DATA3)
-#define bfin_write_CAN1_MB24_DATA3(val) bfin_write16(CAN1_MB24_DATA3, val)
-#define bfin_read_CAN1_MB24_LENGTH() bfin_read16(CAN1_MB24_LENGTH)
-#define bfin_write_CAN1_MB24_LENGTH(val) bfin_write16(CAN1_MB24_LENGTH, val)
-#define bfin_read_CAN1_MB24_TIMESTAMP() bfin_read16(CAN1_MB24_TIMESTAMP)
-#define bfin_write_CAN1_MB24_TIMESTAMP(val) bfin_write16(CAN1_MB24_TIMESTAMP, val)
-#define bfin_read_CAN1_MB24_ID0() bfin_read16(CAN1_MB24_ID0)
-#define bfin_write_CAN1_MB24_ID0(val) bfin_write16(CAN1_MB24_ID0, val)
-#define bfin_read_CAN1_MB24_ID1() bfin_read16(CAN1_MB24_ID1)
-#define bfin_write_CAN1_MB24_ID1(val) bfin_write16(CAN1_MB24_ID1, val)
-#define bfin_read_CAN1_MB25_DATA0() bfin_read16(CAN1_MB25_DATA0)
-#define bfin_write_CAN1_MB25_DATA0(val) bfin_write16(CAN1_MB25_DATA0, val)
-#define bfin_read_CAN1_MB25_DATA1() bfin_read16(CAN1_MB25_DATA1)
-#define bfin_write_CAN1_MB25_DATA1(val) bfin_write16(CAN1_MB25_DATA1, val)
-#define bfin_read_CAN1_MB25_DATA2() bfin_read16(CAN1_MB25_DATA2)
-#define bfin_write_CAN1_MB25_DATA2(val) bfin_write16(CAN1_MB25_DATA2, val)
-#define bfin_read_CAN1_MB25_DATA3() bfin_read16(CAN1_MB25_DATA3)
-#define bfin_write_CAN1_MB25_DATA3(val) bfin_write16(CAN1_MB25_DATA3, val)
-#define bfin_read_CAN1_MB25_LENGTH() bfin_read16(CAN1_MB25_LENGTH)
-#define bfin_write_CAN1_MB25_LENGTH(val) bfin_write16(CAN1_MB25_LENGTH, val)
-#define bfin_read_CAN1_MB25_TIMESTAMP() bfin_read16(CAN1_MB25_TIMESTAMP)
-#define bfin_write_CAN1_MB25_TIMESTAMP(val) bfin_write16(CAN1_MB25_TIMESTAMP, val)
-#define bfin_read_CAN1_MB25_ID0() bfin_read16(CAN1_MB25_ID0)
-#define bfin_write_CAN1_MB25_ID0(val) bfin_write16(CAN1_MB25_ID0, val)
-#define bfin_read_CAN1_MB25_ID1() bfin_read16(CAN1_MB25_ID1)
-#define bfin_write_CAN1_MB25_ID1(val) bfin_write16(CAN1_MB25_ID1, val)
-#define bfin_read_CAN1_MB26_DATA0() bfin_read16(CAN1_MB26_DATA0)
-#define bfin_write_CAN1_MB26_DATA0(val) bfin_write16(CAN1_MB26_DATA0, val)
-#define bfin_read_CAN1_MB26_DATA1() bfin_read16(CAN1_MB26_DATA1)
-#define bfin_write_CAN1_MB26_DATA1(val) bfin_write16(CAN1_MB26_DATA1, val)
-#define bfin_read_CAN1_MB26_DATA2() bfin_read16(CAN1_MB26_DATA2)
-#define bfin_write_CAN1_MB26_DATA2(val) bfin_write16(CAN1_MB26_DATA2, val)
-#define bfin_read_CAN1_MB26_DATA3() bfin_read16(CAN1_MB26_DATA3)
-#define bfin_write_CAN1_MB26_DATA3(val) bfin_write16(CAN1_MB26_DATA3, val)
-#define bfin_read_CAN1_MB26_LENGTH() bfin_read16(CAN1_MB26_LENGTH)
-#define bfin_write_CAN1_MB26_LENGTH(val) bfin_write16(CAN1_MB26_LENGTH, val)
-#define bfin_read_CAN1_MB26_TIMESTAMP() bfin_read16(CAN1_MB26_TIMESTAMP)
-#define bfin_write_CAN1_MB26_TIMESTAMP(val) bfin_write16(CAN1_MB26_TIMESTAMP, val)
-#define bfin_read_CAN1_MB26_ID0() bfin_read16(CAN1_MB26_ID0)
-#define bfin_write_CAN1_MB26_ID0(val) bfin_write16(CAN1_MB26_ID0, val)
-#define bfin_read_CAN1_MB26_ID1() bfin_read16(CAN1_MB26_ID1)
-#define bfin_write_CAN1_MB26_ID1(val) bfin_write16(CAN1_MB26_ID1, val)
-#define bfin_read_CAN1_MB27_DATA0() bfin_read16(CAN1_MB27_DATA0)
-#define bfin_write_CAN1_MB27_DATA0(val) bfin_write16(CAN1_MB27_DATA0, val)
-#define bfin_read_CAN1_MB27_DATA1() bfin_read16(CAN1_MB27_DATA1)
-#define bfin_write_CAN1_MB27_DATA1(val) bfin_write16(CAN1_MB27_DATA1, val)
-#define bfin_read_CAN1_MB27_DATA2() bfin_read16(CAN1_MB27_DATA2)
-#define bfin_write_CAN1_MB27_DATA2(val) bfin_write16(CAN1_MB27_DATA2, val)
-#define bfin_read_CAN1_MB27_DATA3() bfin_read16(CAN1_MB27_DATA3)
-#define bfin_write_CAN1_MB27_DATA3(val) bfin_write16(CAN1_MB27_DATA3, val)
-#define bfin_read_CAN1_MB27_LENGTH() bfin_read16(CAN1_MB27_LENGTH)
-#define bfin_write_CAN1_MB27_LENGTH(val) bfin_write16(CAN1_MB27_LENGTH, val)
-#define bfin_read_CAN1_MB27_TIMESTAMP() bfin_read16(CAN1_MB27_TIMESTAMP)
-#define bfin_write_CAN1_MB27_TIMESTAMP(val) bfin_write16(CAN1_MB27_TIMESTAMP, val)
-#define bfin_read_CAN1_MB27_ID0() bfin_read16(CAN1_MB27_ID0)
-#define bfin_write_CAN1_MB27_ID0(val) bfin_write16(CAN1_MB27_ID0, val)
-#define bfin_read_CAN1_MB27_ID1() bfin_read16(CAN1_MB27_ID1)
-#define bfin_write_CAN1_MB27_ID1(val) bfin_write16(CAN1_MB27_ID1, val)
-#define bfin_read_CAN1_MB28_DATA0() bfin_read16(CAN1_MB28_DATA0)
-#define bfin_write_CAN1_MB28_DATA0(val) bfin_write16(CAN1_MB28_DATA0, val)
-#define bfin_read_CAN1_MB28_DATA1() bfin_read16(CAN1_MB28_DATA1)
-#define bfin_write_CAN1_MB28_DATA1(val) bfin_write16(CAN1_MB28_DATA1, val)
-#define bfin_read_CAN1_MB28_DATA2() bfin_read16(CAN1_MB28_DATA2)
-#define bfin_write_CAN1_MB28_DATA2(val) bfin_write16(CAN1_MB28_DATA2, val)
-#define bfin_read_CAN1_MB28_DATA3() bfin_read16(CAN1_MB28_DATA3)
-#define bfin_write_CAN1_MB28_DATA3(val) bfin_write16(CAN1_MB28_DATA3, val)
-#define bfin_read_CAN1_MB28_LENGTH() bfin_read16(CAN1_MB28_LENGTH)
-#define bfin_write_CAN1_MB28_LENGTH(val) bfin_write16(CAN1_MB28_LENGTH, val)
-#define bfin_read_CAN1_MB28_TIMESTAMP() bfin_read16(CAN1_MB28_TIMESTAMP)
-#define bfin_write_CAN1_MB28_TIMESTAMP(val) bfin_write16(CAN1_MB28_TIMESTAMP, val)
-#define bfin_read_CAN1_MB28_ID0() bfin_read16(CAN1_MB28_ID0)
-#define bfin_write_CAN1_MB28_ID0(val) bfin_write16(CAN1_MB28_ID0, val)
-#define bfin_read_CAN1_MB28_ID1() bfin_read16(CAN1_MB28_ID1)
-#define bfin_write_CAN1_MB28_ID1(val) bfin_write16(CAN1_MB28_ID1, val)
-#define bfin_read_CAN1_MB29_DATA0() bfin_read16(CAN1_MB29_DATA0)
-#define bfin_write_CAN1_MB29_DATA0(val) bfin_write16(CAN1_MB29_DATA0, val)
-#define bfin_read_CAN1_MB29_DATA1() bfin_read16(CAN1_MB29_DATA1)
-#define bfin_write_CAN1_MB29_DATA1(val) bfin_write16(CAN1_MB29_DATA1, val)
-#define bfin_read_CAN1_MB29_DATA2() bfin_read16(CAN1_MB29_DATA2)
-#define bfin_write_CAN1_MB29_DATA2(val) bfin_write16(CAN1_MB29_DATA2, val)
-#define bfin_read_CAN1_MB29_DATA3() bfin_read16(CAN1_MB29_DATA3)
-#define bfin_write_CAN1_MB29_DATA3(val) bfin_write16(CAN1_MB29_DATA3, val)
-#define bfin_read_CAN1_MB29_LENGTH() bfin_read16(CAN1_MB29_LENGTH)
-#define bfin_write_CAN1_MB29_LENGTH(val) bfin_write16(CAN1_MB29_LENGTH, val)
-#define bfin_read_CAN1_MB29_TIMESTAMP() bfin_read16(CAN1_MB29_TIMESTAMP)
-#define bfin_write_CAN1_MB29_TIMESTAMP(val) bfin_write16(CAN1_MB29_TIMESTAMP, val)
-#define bfin_read_CAN1_MB29_ID0() bfin_read16(CAN1_MB29_ID0)
-#define bfin_write_CAN1_MB29_ID0(val) bfin_write16(CAN1_MB29_ID0, val)
-#define bfin_read_CAN1_MB29_ID1() bfin_read16(CAN1_MB29_ID1)
-#define bfin_write_CAN1_MB29_ID1(val) bfin_write16(CAN1_MB29_ID1, val)
-#define bfin_read_CAN1_MB30_DATA0() bfin_read16(CAN1_MB30_DATA0)
-#define bfin_write_CAN1_MB30_DATA0(val) bfin_write16(CAN1_MB30_DATA0, val)
-#define bfin_read_CAN1_MB30_DATA1() bfin_read16(CAN1_MB30_DATA1)
-#define bfin_write_CAN1_MB30_DATA1(val) bfin_write16(CAN1_MB30_DATA1, val)
-#define bfin_read_CAN1_MB30_DATA2() bfin_read16(CAN1_MB30_DATA2)
-#define bfin_write_CAN1_MB30_DATA2(val) bfin_write16(CAN1_MB30_DATA2, val)
-#define bfin_read_CAN1_MB30_DATA3() bfin_read16(CAN1_MB30_DATA3)
-#define bfin_write_CAN1_MB30_DATA3(val) bfin_write16(CAN1_MB30_DATA3, val)
-#define bfin_read_CAN1_MB30_LENGTH() bfin_read16(CAN1_MB30_LENGTH)
-#define bfin_write_CAN1_MB30_LENGTH(val) bfin_write16(CAN1_MB30_LENGTH, val)
-#define bfin_read_CAN1_MB30_TIMESTAMP() bfin_read16(CAN1_MB30_TIMESTAMP)
-#define bfin_write_CAN1_MB30_TIMESTAMP(val) bfin_write16(CAN1_MB30_TIMESTAMP, val)
-#define bfin_read_CAN1_MB30_ID0() bfin_read16(CAN1_MB30_ID0)
-#define bfin_write_CAN1_MB30_ID0(val) bfin_write16(CAN1_MB30_ID0, val)
-#define bfin_read_CAN1_MB30_ID1() bfin_read16(CAN1_MB30_ID1)
-#define bfin_write_CAN1_MB30_ID1(val) bfin_write16(CAN1_MB30_ID1, val)
-#define bfin_read_CAN1_MB31_DATA0() bfin_read16(CAN1_MB31_DATA0)
-#define bfin_write_CAN1_MB31_DATA0(val) bfin_write16(CAN1_MB31_DATA0, val)
-#define bfin_read_CAN1_MB31_DATA1() bfin_read16(CAN1_MB31_DATA1)
-#define bfin_write_CAN1_MB31_DATA1(val) bfin_write16(CAN1_MB31_DATA1, val)
-#define bfin_read_CAN1_MB31_DATA2() bfin_read16(CAN1_MB31_DATA2)
-#define bfin_write_CAN1_MB31_DATA2(val) bfin_write16(CAN1_MB31_DATA2, val)
-#define bfin_read_CAN1_MB31_DATA3() bfin_read16(CAN1_MB31_DATA3)
-#define bfin_write_CAN1_MB31_DATA3(val) bfin_write16(CAN1_MB31_DATA3, val)
-#define bfin_read_CAN1_MB31_LENGTH() bfin_read16(CAN1_MB31_LENGTH)
-#define bfin_write_CAN1_MB31_LENGTH(val) bfin_write16(CAN1_MB31_LENGTH, val)
-#define bfin_read_CAN1_MB31_TIMESTAMP() bfin_read16(CAN1_MB31_TIMESTAMP)
-#define bfin_write_CAN1_MB31_TIMESTAMP(val) bfin_write16(CAN1_MB31_TIMESTAMP, val)
-#define bfin_read_CAN1_MB31_ID0() bfin_read16(CAN1_MB31_ID0)
-#define bfin_write_CAN1_MB31_ID0(val) bfin_write16(CAN1_MB31_ID0, val)
-#define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1)
-#define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val)
-
-/* ATAPI Registers */
-
-#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL)
-#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val)
-#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS)
-#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val)
-#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR)
-#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val)
-#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF)
-#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val)
-#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF)
-#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val)
-#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK)
-#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val)
-#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS)
-#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val)
-#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN)
-#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val)
-#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS)
-#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val)
-#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE)
-#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val)
-#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE)
-#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val)
-#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT)
-#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val)
-#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT)
-#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val)
-#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT)
-#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val)
-#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT)
-#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val)
-#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0)
-#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val)
-#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0)
-#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val)
-#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1)
-#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val)
-#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0)
-#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val)
-#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1)
-#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val)
-#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2)
-#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val)
-#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0)
-#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val)
-#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1)
-#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val)
-#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2)
-#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val)
-#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3)
-#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val)
-
-/* SDH Registers */
-
-#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL)
-#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val)
-#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL)
-#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val)
-#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT)
-#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val)
-#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND)
-#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val)
-#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD)
-#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val)
-#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0)
-#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val)
-#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1)
-#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val)
-#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2)
-#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val)
-#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3)
-#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val)
-#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER)
-#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val)
-#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH)
-#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val)
-#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL)
-#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val)
-#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT)
-#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val)
-#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS)
-#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val)
-#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR)
-#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val)
-#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0)
-#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val)
-#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1)
-#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val)
-#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT)
-#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val)
-#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO)
-#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val)
-#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS)
-#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val)
-#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK)
-#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val)
-#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG)
-#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val)
-#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN)
-#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val)
-#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0)
-#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val)
-#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1)
-#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val)
-#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2)
-#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val)
-#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3)
-#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val)
-#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4)
-#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val)
-#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5)
-#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val)
-#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6)
-#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val)
-#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7)
-#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val)
-
-/* HOST Port Registers */
-
-#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL)
-#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val)
-#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS)
-#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val)
-#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT)
-#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val)
-
-/* USB Control Registers */
-
-#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR)
-#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val)
-#define bfin_read_USB_POWER() bfin_read16(USB_POWER)
-#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val)
-#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX)
-#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val)
-#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX)
-#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val)
-#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE)
-#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val)
-#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE)
-#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val)
-#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB)
-#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val)
-#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE)
-#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val)
-#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME)
-#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val)
-#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX)
-#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val)
-#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE)
-#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val)
-#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR)
-#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val)
-#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL)
-#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val)
-
-/* USB Packet Control Registers */
-
-#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET)
-#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val)
-#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0)
-#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val)
-#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR)
-#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val)
-#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET)
-#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val)
-#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR)
-#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val)
-#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0)
-#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val)
-#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT)
-#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val)
-#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE)
-#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val)
-#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0)
-#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val)
-#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL)
-#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val)
-#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE)
-#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val)
-#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL)
-#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val)
-#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT)
-#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val)
-
-/* USB Endbfin_read_()oint FIFO Registers */
-
-#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO)
-#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val)
-#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO)
-#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val)
-#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO)
-#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val)
-#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO)
-#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val)
-#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO)
-#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val)
-#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO)
-#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val)
-#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO)
-#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val)
-#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO)
-#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val)
-
-/* USB OTG Control Registers */
-
-#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL)
-#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val)
-#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ)
-#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val)
-#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK)
-#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val)
-
-/* USB Phy Control Registers */
-
-#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO)
-#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val)
-#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN)
-#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val)
-#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1)
-#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val)
-#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1)
-#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val)
-#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1)
-#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val)
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL)
-#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val)
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB)
-#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val)
-#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2)
-#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val)
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST)
-#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val)
-#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL)
-#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val)
-#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV)
-#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val)
-
-/* USB Endbfin_read_()oint 0 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP)
-#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val)
-#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR)
-#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val)
-#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP)
-#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val)
-#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR)
-#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val)
-#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT)
-#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val)
-#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE)
-#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val)
-#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL)
-#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE)
-#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val)
-#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL)
-#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 1 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT)
-#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP)
-#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val)
-#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR)
-#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val)
-#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP)
-#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val)
-#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR)
-#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val)
-#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT)
-#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE)
-#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val)
-#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL)
-#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE)
-#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val)
-#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL)
-#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 2 Control Registers */
-
-#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT)
-#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP)
-#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val)
-#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR)
-#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val)
-#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP)
-#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val)
-#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR)
-#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val)
-#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT)
-#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE)
-#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val)
-#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL)
-#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE)
-#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val)
-#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL)
-#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 3 Control Registers */
-
-#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT)
-#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP)
-#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val)
-#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR)
-#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val)
-#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP)
-#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val)
-#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR)
-#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val)
-#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT)
-#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE)
-#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val)
-#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL)
-#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE)
-#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val)
-#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL)
-#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 4 Control Registers */
-
-#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT)
-#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP)
-#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val)
-#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR)
-#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val)
-#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP)
-#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val)
-#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR)
-#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val)
-#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT)
-#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE)
-#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val)
-#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL)
-#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE)
-#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val)
-#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL)
-#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 5 Control Registers */
-
-#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT)
-#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP)
-#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val)
-#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR)
-#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val)
-#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP)
-#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val)
-#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR)
-#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val)
-#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT)
-#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE)
-#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val)
-#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL)
-#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE)
-#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val)
-#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL)
-#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 6 Control Registers */
-
-#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT)
-#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP)
-#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val)
-#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR)
-#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val)
-#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP)
-#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val)
-#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR)
-#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val)
-#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT)
-#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE)
-#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val)
-#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL)
-#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE)
-#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val)
-#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL)
-#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val)
-
-/* USB Endbfin_read_()oint 7 Control Registers */
-
-#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT)
-#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP)
-#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val)
-#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR)
-#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val)
-#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP)
-#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val)
-#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR)
-#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val)
-#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT)
-#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE)
-#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val)
-#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL)
-#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE)
-#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val)
-#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL)
-#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT)
-#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val)
-#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT)
-#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val)
-
-/* USB Channel 0 Config Registers */
-
-#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL)
-#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val)
-#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW)
-#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val)
-#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH)
-#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val)
-#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW)
-#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val)
-#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH)
-#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val)
-
-/* USB Channel 1 Config Registers */
-
-#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL)
-#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val)
-#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW)
-#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val)
-#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH)
-#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val)
-#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW)
-#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val)
-#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH)
-#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val)
-
-/* USB Channel 2 Config Registers */
-
-#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL)
-#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val)
-#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW)
-#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val)
-#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH)
-#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val)
-#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW)
-#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val)
-#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH)
-#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val)
-
-/* USB Channel 3 Config Registers */
-
-#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL)
-#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val)
-#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW)
-#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val)
-#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH)
-#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val)
-#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW)
-#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val)
-#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH)
-#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val)
-
-/* USB Channel 4 Config Registers */
-
-#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL)
-#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val)
-#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW)
-#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val)
-#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH)
-#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val)
-#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW)
-#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val)
-#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH)
-#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val)
-
-/* USB Channel 5 Config Registers */
-
-#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL)
-#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val)
-#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW)
-#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val)
-#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH)
-#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val)
-#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW)
-#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val)
-#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH)
-#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val)
-
-/* USB Channel 6 Config Registers */
-
-#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL)
-#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val)
-#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW)
-#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val)
-#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH)
-#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val)
-#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW)
-#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val)
-#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH)
-#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val)
-
-/* USB Channel 7 Config Registers */
-
-#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL)
-#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val)
-#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW)
-#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val)
-#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH)
-#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val)
-#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW)
-#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val)
-#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH)
-#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val)
-
-/* Keybfin_read_()ad Registers */
-
-#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL)
-#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val)
-#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE)
-#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val)
-#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL)
-#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val)
-#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL)
-#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val)
-#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT)
-#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val)
-#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL)
-#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val)
-
-/* Pixel Combfin_read_()ositor (PIXC) Registers */
-
-#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL)
-#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val)
-#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL)
-#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val)
-#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF)
-#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val)
-#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART)
-#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val)
-#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND)
-#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val)
-#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART)
-#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val)
-#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND)
-#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val)
-#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP)
-#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val)
-#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART)
-#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val)
-#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND)
-#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val)
-#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART)
-#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val)
-#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND)
-#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val)
-#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP)
-#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val)
-#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT)
-#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val)
-#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON)
-#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val)
-#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON)
-#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val)
-#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON)
-#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val)
-#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS)
-#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val)
-#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC)
-#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val)
-
-/* Handshake MDMA 0 Registers */
-
-#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL)
-#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val)
-#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT)
-#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val)
-#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT)
-#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val)
-#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT)
-#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val)
-#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW)
-#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val)
-#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT)
-#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val)
-#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT)
-#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val)
-
-/* Handshake MDMA 1 Registers */
-
-#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL)
-#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val)
-#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT)
-#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val)
-#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT)
-#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val)
-#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT)
-#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val)
-#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW)
-#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val)
-#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT)
-#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val)
-#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT)
-#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val)
-
#endif /* _CDEF_BF549_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
index a2e9d98..32f71e6 100644
--- a/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
@@ -2615,17 +2615,6 @@
#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN)
#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val)
-/* OTP/FUSE Registers */
-
-#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL)
-#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val)
-#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN)
-#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val)
-#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS)
-#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val)
-#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING)
-#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val)
-
/* Security Registers */
#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT)
@@ -2640,17 +2629,6 @@
#define bfin_read_DMAC1_PERIMUX() bfin_read16(DMAC1_PERIMUX)
#define bfin_write_DMAC1_PERIMUX(val) bfin_write16(DMAC1_PERIMUX, val)
-/* OTP Read/Write Data Buffer Registers */
-
-#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0)
-#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val)
-#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1)
-#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val)
-#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2)
-#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val)
-#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3)
-#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val)
-
/* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 bfin_read_()rocessor */
/* legacy definitions */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index 39f588d..f916c52 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -624,9 +624,9 @@
#define DMA_READY 0x1 /* DMA Ready */
#define FIFOFULL 0x2 /* FIFO Full */
#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define COMPLETE 0x8 /* DMA Complete */
+#define DMA_COMPLETE 0x8 /* DMA Complete */
#define HSHK 0x10 /* Host Handshake */
-#define TIMEOUT 0x20 /* Host Timeout */
+#define HSTIMEOUT 0x20 /* Host Timeout */
#define HIRQ 0x40 /* Host Interrupt Request */
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
#define DMA_DIR 0x100 /* DMA Direction */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index c4dcf30..72c3436 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -4,18 +4,18 @@
* Licensed under the ADI BSD license or the GPL-2 (or later)
*/
-#ifndef _DEF_BF548_H
-#define _DEF_BF548_H
+#ifndef _DEF_BF547_H
+#define _DEF_BF547_H
/* Include all Core registers and bit definitions */
#include <asm/def_LPBlackfin.h>
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF547 */
/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
#include "defBF54x_base.h"
-/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
+/* The following are the #defines needed by ADSP-BF547 that are not in the common header */
/* Timer Registers */
@@ -1217,4 +1217,4 @@
/* ******************************************* */
-#endif /* _DEF_BF548_H */
+#endif /* _DEF_BF547_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
index a507998..3fb33b0 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -15,115 +15,8 @@
/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
#include "defBF54x_base.h"
-/* The following are the #defines needed by ADSP-BF548 that are not in the common header */
-
-/* Timer Registers */
-
-#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */
-#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */
-#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */
-#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */
-#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */
-#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */
-#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */
-#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */
-#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */
-#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */
-#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */
-#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */
-
-/* Timer Group of 3 Registers */
-
-#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */
-#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */
-#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */
-
-/* SPORT0 Registers */
-
-#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */
-#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */
-#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */
-#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */
-#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */
-#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */
-#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */
-#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */
-#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */
-#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */
-#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */
-#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */
-#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */
-#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */
-#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */
-#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */
-#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */
-#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */
-#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */
-#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */
-#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */
-#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */
-
-/* EPPI0 Registers */
-
-#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */
-#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */
-#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */
-#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */
-#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */
-#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */
-#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */
-#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */
-#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */
-#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
-#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
-#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
-#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
-#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */
-
-/* UART2 Registers */
-
-#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */
-#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */
-#define UART2_GCTL 0xffc02108 /* Global Control Register */
-#define UART2_LCR 0xffc0210c /* Line Control Register */
-#define UART2_MCR 0xffc02110 /* Modem Control Register */
-#define UART2_LSR 0xffc02114 /* Line Status Register */
-#define UART2_MSR 0xffc02118 /* Modem Status Register */
-#define UART2_SCR 0xffc0211c /* Scratch Register */
-#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */
-#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */
-#define UART2_RBR 0xffc0212c /* Receive Buffer Register */
-
-/* Two Wire Interface Registers (TWI1) */
-
-#define TWI1_REGBASE 0xffc02200
-#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */
-#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */
-#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */
-#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */
-#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */
-#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */
-#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */
-#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */
-#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */
-#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */
-#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */
-#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */
-#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */
-#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */
-#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */
-#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */
-
-/* SPI2 Registers */
-
-#define SPI2_REGBASE 0xffc02400
-#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */
-#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */
-#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */
-#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */
-#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */
-#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */
-#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */
+/* The BF548 is like the BF547, but has additional CANs */
+#include "defBF547.h"
/* CAN Controller 1 Config 1 Registers */
@@ -508,1096 +401,4 @@
#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */
#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */
-/* ATAPI Registers */
-
-#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
-#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
-#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
-#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
-#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
-#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
-#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
-#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
-#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
-#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
-#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
-#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
-#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
-#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
-#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
-#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
-#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
-#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
-#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
-#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
-#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
-#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
-#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
-#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
-#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
-
-/* SDH Registers */
-
-#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
-#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
-#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
-#define SDH_COMMAND 0xffc0390c /* SDH Command */
-#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
-#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
-#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
-#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
-#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
-#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
-#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
-#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
-#define SDH_STATUS 0xffc03934 /* SDH Status */
-#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
-#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
-#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
-#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
-#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
-#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
-#define SDH_CFG 0xffc039c8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
-#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
-#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
-#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
-#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
-#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
-#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
-#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
-#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
-
-/* HOST Port Registers */
-
-#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */
-#define HOST_STATUS 0xffc03a04 /* HOST Status Register */
-#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */
-
-/* USB Control Registers */
-
-#define USB_FADDR 0xffc03c00 /* Function address register */
-#define USB_POWER 0xffc03c04 /* Power management register */
-#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
-#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
-#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
-#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
-#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
-#define USB_FRAME 0xffc03c20 /* USB frame number */
-#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
-#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
-#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
-
-/* USB Packet Control Registers */
-
-#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
-#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
-#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
-#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* USB Endpoint FIFO Registers */
-
-#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
-#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
-#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
-#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
-#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
-#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
-#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
-#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
-
-/* USB OTG Control Registers */
-
-#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
-#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
-#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
-
-/* USB Phy Control Registers */
-
-#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
-#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
-#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
-#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
-#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
-#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
-#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
-#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
-
-/* USB Endpoint 0 Control Registers */
-
-#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
-#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
-#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
-#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
-#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-
-/* USB Endpoint 1 Control Registers */
-
-#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
-#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
-#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
-#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
-#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
-#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-
-/* USB Endpoint 2 Control Registers */
-
-#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
-#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
-#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
-#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
-#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-
-/* USB Endpoint 3 Control Registers */
-
-#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
-#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
-#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
-#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
-#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
-#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-
-/* USB Endpoint 4 Control Registers */
-
-#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
-#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
-#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
-#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
-#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-
-/* USB Endpoint 5 Control Registers */
-
-#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
-#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
-#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
-#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
-#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
-#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-
-/* USB Endpoint 6 Control Registers */
-
-#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
-#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
-#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
-#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
-#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
-#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-
-/* USB Endpoint 7 Control Registers */
-
-#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
-#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
-#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
-#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
-#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
-#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
-#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
-
-/* USB Channel 0 Config Registers */
-
-#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
-#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-
-/* USB Channel 1 Config Registers */
-
-#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
-#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-
-/* USB Channel 2 Config Registers */
-
-#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
-#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-
-/* USB Channel 3 Config Registers */
-
-#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
-#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-
-/* USB Channel 4 Config Registers */
-
-#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
-#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-
-/* USB Channel 5 Config Registers */
-
-#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
-#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-
-/* USB Channel 6 Config Registers */
-
-#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
-#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-
-/* USB Channel 7 Config Registers */
-
-#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
-#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
-
-/* Keypad Registers */
-
-#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
-#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
-#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
-#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
-#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
-#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
-
-/* Pixel Compositor (PIXC) Registers */
-
-#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
-#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */
-#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */
-#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */
-#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */
-#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */
-#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */
-#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */
-#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */
-#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */
-#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */
-#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */
-#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */
-#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */
-#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
-#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */
-#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */
-#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */
-#define PIXC_TC 0xffc04450 /* Holds the transparent color value */
-
-/* Handshake MDMA 0 Registers */
-
-#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
-#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
-#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
-#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
-#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
-#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
-
-/* Handshake MDMA 1 Registers */
-
-#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
-#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
-#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
-#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
-#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
-#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
-
-
-/* ********************************************************** */
-/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
-/* and MULTI BIT READ MACROS */
-/* ********************************************************** */
-
-/* Bit masks for PIXC_CTL */
-
-#define PIXC_EN 0x1 /* Pixel Compositor Enable */
-#define OVR_A_EN 0x2 /* Overlay A Enable */
-#define OVR_B_EN 0x4 /* Overlay B Enable */
-#define IMG_FORM 0x8 /* Image Data Format */
-#define OVR_FORM 0x10 /* Overlay Data Format */
-#define OUT_FORM 0x20 /* Output Data Format */
-#define UDS_MOD 0x40 /* Resampling Mode */
-#define TC_EN 0x80 /* Transparent Color Enable */
-#define IMG_STAT 0x300 /* Image FIFO Status */
-#define OVR_STAT 0xc00 /* Overlay FIFO Status */
-#define WM_LVL 0x3000 /* FIFO Watermark Level */
-
-/* Bit masks for PIXC_AHSTART */
-
-#define A_HSTART 0xfff /* Horizontal Start Coordinates */
-
-/* Bit masks for PIXC_AHEND */
-
-#define A_HEND 0xfff /* Horizontal End Coordinates */
-
-/* Bit masks for PIXC_AVSTART */
-
-#define A_VSTART 0x3ff /* Vertical Start Coordinates */
-
-/* Bit masks for PIXC_AVEND */
-
-#define A_VEND 0x3ff /* Vertical End Coordinates */
-
-/* Bit masks for PIXC_ATRANSP */
-
-#define A_TRANSP 0xf /* Transparency Value */
-
-/* Bit masks for PIXC_BHSTART */
-
-#define B_HSTART 0xfff /* Horizontal Start Coordinates */
-
-/* Bit masks for PIXC_BHEND */
-
-#define B_HEND 0xfff /* Horizontal End Coordinates */
-
-/* Bit masks for PIXC_BVSTART */
-
-#define B_VSTART 0x3ff /* Vertical Start Coordinates */
-
-/* Bit masks for PIXC_BVEND */
-
-#define B_VEND 0x3ff /* Vertical End Coordinates */
-
-/* Bit masks for PIXC_BTRANSP */
-
-#define B_TRANSP 0xf /* Transparency Value */
-
-/* Bit masks for PIXC_INTRSTAT */
-
-#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
-#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
-#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
-#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
-
-/* Bit masks for PIXC_RYCON */
-
-#define A11 0x3ff /* A11 in the Coefficient Matrix */
-#define A12 0xffc00 /* A12 in the Coefficient Matrix */
-#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
-#define RY_MULT4 0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_GUCON */
-
-#define A21 0x3ff /* A21 in the Coefficient Matrix */
-#define A22 0xffc00 /* A22 in the Coefficient Matrix */
-#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
-#define GU_MULT4 0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_BVCON */
-
-#define A31 0x3ff /* A31 in the Coefficient Matrix */
-#define A32 0xffc00 /* A32 in the Coefficient Matrix */
-#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
-#define BV_MULT4 0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_CCBIAS */
-
-#define A14 0x3ff /* A14 in the Bias Vector */
-#define A24 0xffc00 /* A24 in the Bias Vector */
-#define A34 0x3ff00000 /* A34 in the Bias Vector */
-
-/* Bit masks for PIXC_TC */
-
-#define RY_TRANS 0xff /* Transparent Color - R/Y Component */
-#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
-#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
-
-/* Bit masks for HOST_CONTROL */
-
-#define HOST_EN 0x1 /* Host Enable */
-#define HOST_END 0x2 /* Host Endianess */
-#define DATA_SIZE 0x4 /* Data Size */
-#define HOST_RST 0x8 /* Host Reset */
-#define HRDY_OVR 0x20 /* Host Ready Override */
-#define INT_MODE 0x40 /* Interrupt Mode */
-#define BT_EN 0x80 /* Bus Timeout Enable */
-#define EHW 0x100 /* Enable Host Write */
-#define EHR 0x200 /* Enable Host Read */
-#define BDR 0x400 /* Burst DMA Requests */
-
-/* Bit masks for HOST_STATUS */
-
-#define DMA_READY 0x1 /* DMA Ready */
-#define FIFOFULL 0x2 /* FIFO Full */
-#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define DMA_COMPLETE 0x8 /* DMA Complete */
-#define HSHK 0x10 /* Host Handshake */
-#define HSTIMEOUT 0x20 /* Host Timeout */
-#define HIRQ 0x40 /* Host Interrupt Request */
-#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define DMA_DIR 0x100 /* DMA Direction */
-#define BTE 0x200 /* Bus Timeout Enabled */
-
-/* Bit masks for HOST_TIMEOUT */
-
-#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
-
-/* Bit masks for KPAD_CTL */
-
-#define KPAD_EN 0x1 /* Keypad Enable */
-#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
-#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
-#define KPAD_COLEN 0xe000 /* Column Enable Width */
-
-/* Bit masks for KPAD_PRESCALE */
-
-#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
-
-/* Bit masks for KPAD_MSEL */
-
-#define DBON_SCALE 0xff /* Debounce Scale Value */
-#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
-
-/* Bit masks for KPAD_ROWCOL */
-
-#define KPAD_ROW 0xff /* Rows Pressed */
-#define KPAD_COL 0xff00 /* Columns Pressed */
-
-/* Bit masks for KPAD_STAT */
-
-#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
-#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
-#define KPAD_PRESSED 0x8 /* Key press current status */
-
-/* Bit masks for KPAD_SOFTEVAL */
-
-#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
-
-/* Bit masks for SDH_COMMAND */
-
-#define CMD_IDX 0x3f /* Command Index */
-#define CMD_RSP 0x40 /* Response */
-#define CMD_L_RSP 0x80 /* Long Response */
-#define CMD_INT_E 0x100 /* Command Interrupt */
-#define CMD_PEND_E 0x200 /* Command Pending */
-#define CMD_E 0x400 /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define PWR_ON 0x3 /* Power On */
-#if 0
-#define TBD 0x3c /* TBD */
-#endif
-#define SD_CMD_OD 0x40 /* Open Drain Output */
-#define ROD_CTL 0x80 /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define CLKDIV 0xff /* MC_CLK Divisor */
-#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
-#define PWR_SV_E 0x200 /* Power Save Enable */
-#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
-#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define RESP_CMD 0x3f /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define DTX_E 0x1 /* Data Transfer Enable */
-#define DTX_DIR 0x2 /* Data Transfer Direction */
-#define DTX_MODE 0x4 /* Data Transfer Mode */
-#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
-#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
-#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
-#define CMD_TIME_OUT 0x4 /* CMD Time Out */
-#define DAT_TIME_OUT 0x8 /* Data Time Out */
-#define TX_UNDERRUN 0x10 /* Transmit Underrun */
-#define RX_OVERRUN 0x20 /* Receive Overrun */
-#define CMD_RESP_END 0x40 /* CMD Response End */
-#define CMD_SENT 0x80 /* CMD Sent */
-#define DAT_END 0x100 /* Data End */
-#define START_BIT_ERR 0x200 /* Start Bit Error */
-#define DAT_BLK_END 0x400 /* Data Block End */
-#define CMD_ACT 0x800 /* CMD Active */
-#define TX_ACT 0x1000 /* Transmit Active */
-#define RX_ACT 0x2000 /* Receive Active */
-#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
-#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
-#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
-#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
-#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
-#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
-#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
-#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
-#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
-#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
-#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
-#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
-#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
-#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
-#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
-#define DAT_END_STAT 0x100 /* Data End Status */
-#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
-#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
-#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
-#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
-#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
-#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
-#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
-#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
-#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
-#define DAT_END_MASK 0x100 /* Data End Mask */
-#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
-#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
-#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
-#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
-#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
-#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
-#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
-#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
-#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
-#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
-#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
-#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
-#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define FIFO_COUNT 0x7fff /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
-#define SD_CARD_DET 0x10 /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
-#define SCD_MSK 0x40 /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define CLKS_EN 0x1 /* Clocks Enable */
-#define SD4E 0x4 /* SDIO 4-Bit Enable */
-#define MWE 0x8 /* Moving Window Enable */
-#define SD_RST 0x10 /* SDMMC Reset */
-#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
-#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
-#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define RWR 0x1 /* Read Wait Request */
-
-/* Bit masks for ATAPI_CONTROL */
-
-#define PIO_START 0x1 /* Start PIO/Reg Op */
-#define MULTI_START 0x2 /* Start Multi-DMA Op */
-#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
-#define XFER_DIR 0x8 /* Transfer Direction */
-#define IORDY_EN 0x10 /* IORDY Enable */
-#define FIFO_FLUSH 0x20 /* Flush FIFOs */
-#define SOFT_RST 0x40 /* Soft Reset */
-#define DEV_RST 0x80 /* Device Reset */
-#define TFRCNT_RST 0x100 /* Trans Count Reset */
-#define END_ON_TERM 0x200 /* End/Terminate Select */
-#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
-#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
-
-/* Bit masks for ATAPI_STATUS */
-
-#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
-#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
-#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
-#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
-
-/* Bit masks for ATAPI_DEV_ADDR */
-
-#define DEV_ADDR 0x1f /* Device Address */
-
-/* Bit masks for ATAPI_INT_MASK */
-
-#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
-#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
-#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
-#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
-#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
-#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
-#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
-#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
-
-/* Bit masks for ATAPI_INT_STATUS */
-
-#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
-#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
-#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
-#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
-#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
-#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
-#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
-#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
-
-/* Bit masks for ATAPI_LINE_STATUS */
-
-#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
-#define ATAPI_DASP 0x2 /* Device dasp to host line status */
-#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
-#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
-#define ATAPI_ADDR 0x70 /* ATAPI address line status */
-#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
-#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
-#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
-#define ATAPI_DIORN 0x400 /* ATAPI read line status */
-#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_SM_STATE */
-
-#define PIO_CSTATE 0xf /* PIO mode state machine current state */
-#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
-#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
-#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_TERMINATE */
-
-#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
-
-/* Bit masks for ATAPI_REG_TIM_0 */
-
-#define T2_REG 0xff /* End of cycle time for register access transfers */
-#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
-
-/* Bit masks for ATAPI_PIO_TIM_0 */
-
-#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
-#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
-#define T4_REG 0xf000 /* DIOW data hold */
-
-/* Bit masks for ATAPI_PIO_TIM_1 */
-
-#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
-
-/* Bit masks for ATAPI_MULTI_TIM_0 */
-
-#define TD 0xff /* DIOR/DIOW asserted pulsewidth */
-#define TM 0xff00 /* Time from address valid to DIOR/DIOW */
-
-/* Bit masks for ATAPI_MULTI_TIM_1 */
-
-#define TKW 0xff /* Selects DIOW negated pulsewidth */
-#define TKR 0xff00 /* Selects DIOR negated pulsewidth */
-
-/* Bit masks for ATAPI_MULTI_TIM_2 */
-
-#define TH 0xff /* Selects DIOW data hold */
-#define TEOC 0xff00 /* Selects end of cycle for DMA */
-
-/* Bit masks for ATAPI_ULTRA_TIM_0 */
-
-#define TACK 0xff /* Selects setup and hold times for TACK */
-#define TENV 0xff00 /* Selects envelope time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_1 */
-
-#define TDVS 0xff /* Selects data valid setup time */
-#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_2 */
-
-#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
-#define TMLI 0xff00 /* Selects interlock time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_3 */
-
-#define TZAH 0xff /* Selects minimum delay required for output */
-#define READY_PAUSE 0xff00 /* Selects ready to pause */
-
-/* Bit masks for TIMER_ENABLE1 */
-
-#define TIMEN8 0x1 /* Timer 8 Enable */
-#define TIMEN9 0x2 /* Timer 9 Enable */
-#define TIMEN10 0x4 /* Timer 10 Enable */
-
-/* Bit masks for TIMER_DISABLE1 */
-
-#define TIMDIS8 0x1 /* Timer 8 Disable */
-#define TIMDIS9 0x2 /* Timer 9 Disable */
-#define TIMDIS10 0x4 /* Timer 10 Disable */
-
-/* Bit masks for TIMER_STATUS1 */
-
-#define TIMIL8 0x1 /* Timer 8 Interrupt */
-#define TIMIL9 0x2 /* Timer 9 Interrupt */
-#define TIMIL10 0x4 /* Timer 10 Interrupt */
-#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
-#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
-#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
-#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
-#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
-#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
-
-/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
-
-/* Bit masks for USB_FADDR */
-
-#define FUNCTION_ADDRESS 0x7f /* Function address */
-
-/* Bit masks for USB_POWER */
-
-#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
-#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
-#define RESUME_MODE 0x4 /* DMA Mode */
-#define RESET 0x8 /* Reset indicator */
-#define HS_MODE 0x10 /* High Speed mode indicator */
-#define HS_ENABLE 0x20 /* high Speed Enable */
-#define SOFT_CONN 0x40 /* Soft connect */
-#define ISO_UPDATE 0x80 /* Isochronous update */
-
-/* Bit masks for USB_INTRTX */
-
-#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
-#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
-#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
-#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
-#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
-#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
-#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
-#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRRX */
-
-#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
-#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
-#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
-#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
-#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
-#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
-#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRTXE */
-
-#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
-#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
-#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
-#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
-#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
-#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
-#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
-#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
-
-/* Bit masks for USB_INTRRXE */
-
-#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
-#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
-#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
-#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
-#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
-#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
-#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
-
-/* Bit masks for USB_INTRUSB */
-
-#define SUSPEND_B 0x1 /* Suspend indicator */
-#define RESUME_B 0x2 /* Resume indicator */
-#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
-#define SOF_B 0x8 /* Start of frame */
-#define CONN_B 0x10 /* Connection indicator */
-#define DISCON_B 0x20 /* Disconnect indicator */
-#define SESSION_REQ_B 0x40 /* Session Request */
-#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
-
-/* Bit masks for USB_INTRUSBE */
-
-#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
-#define RESUME_BE 0x2 /* Resume indicator int enable */
-#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
-#define SOF_BE 0x8 /* Start of frame int enable */
-#define CONN_BE 0x10 /* Connection indicator int enable */
-#define DISCON_BE 0x20 /* Disconnect indicator int enable */
-#define SESSION_REQ_BE 0x40 /* Session Request int enable */
-#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
-
-/* Bit masks for USB_FRAME */
-
-#define FRAME_NUMBER 0x7ff /* Frame number */
-
-/* Bit masks for USB_INDEX */
-
-#define SELECTED_ENDPOINT 0xf /* selected endpoint */
-
-/* Bit masks for USB_GLOBAL_CTL */
-
-#define GLOBAL_ENA 0x1 /* enables USB module */
-#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
-#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
-#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
-#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
-#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
-#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
-#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
-#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
-#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
-#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
-#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
-#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
-#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
-#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
-
-/* Bit masks for USB_OTG_DEV_CTL */
-
-#define SESSION 0x1 /* session indicator */
-#define HOST_REQ 0x2 /* Host negotiation request */
-#define HOST_MODE 0x4 /* indicates USBDRC is a host */
-#define VBUS0 0x8 /* Vbus level indicator[0] */
-#define VBUS1 0x10 /* Vbus level indicator[1] */
-#define LSDEV 0x20 /* Low-speed indicator */
-#define FSDEV 0x40 /* Full or High-speed indicator */
-#define B_DEVICE 0x80 /* A' or 'B' device indicator */
-
-/* Bit masks for USB_OTG_VBUS_IRQ */
-
-#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
-#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
-#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
-#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
-#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
-#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
-
-/* Bit masks for USB_OTG_VBUS_MASK */
-
-#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
-#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
-#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
-#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
-#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
-#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
-
-/* Bit masks for USB_CSR0 */
-
-#define RXPKTRDY 0x1 /* data packet receive indicator */
-#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
-#define STALL_SENT 0x4 /* STALL handshake sent */
-#define DATAEND 0x8 /* Data end indicator */
-#define SETUPEND 0x10 /* Setup end */
-#define SENDSTALL 0x20 /* Send STALL handshake */
-#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
-#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
-#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
-#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
-#define SETUPPKT_H 0x8 /* send Setup token host mode */
-#define ERROR_H 0x10 /* timeout error indicator host mode */
-#define REQPKT_H 0x20 /* Request an IN transaction host mode */
-#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
-#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
-
-/* Bit masks for USB_COUNT0 */
-
-#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
-
-/* Bit masks for USB_NAKLIMIT0 */
-
-#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
-
-/* Bit masks for USB_TX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_RX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_TXCSR */
-
-#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
-#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
-#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
-#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
-#define STALL_SEND_T 0x10 /* issue a Stall handshake */
-#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
-#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
-#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
-#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
-#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
-#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
-#define ISO_T 0x4000 /* enable Isochronous transfers */
-#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
-#define ERROR_TH 0x4 /* error condition host mode */
-#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
-#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
-
-/* Bit masks for USB_TXCOUNT */
-
-#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* Bit masks for USB_RXCSR */
-
-#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
-#define FIFO_FULL_R 0x2 /* FIFO not empty */
-#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
-#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
-#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
-#define STALL_SEND_R 0x20 /* issue a Stall handshake */
-#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
-#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
-#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
-#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
-#define DISNYET_R 0x1000 /* disable Nyet handshakes */
-#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
-#define ISO_R 0x4000 /* enable Isochronous transfers */
-#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
-#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
-#define REQPKT_RH 0x20 /* request an IN transaction host mode */
-#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
-#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
-#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
-#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
-
-/* Bit masks for USB_RXCOUNT */
-
-#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
-
-/* Bit masks for USB_TXTYPE */
-
-#define TARGET_EP_NO_T 0xf /* EP number */
-#define PROTOCOL_T 0xc /* transfer type */
-
-/* Bit masks for USB_TXINTERVAL */
-
-#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
-
-/* Bit masks for USB_RXTYPE */
-
-#define TARGET_EP_NO_R 0xf /* EP number */
-#define PROTOCOL_R 0xc /* transfer type */
-
-/* Bit masks for USB_RXINTERVAL */
-
-#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
-
-/* Bit masks for USB_DMA_INTERRUPT */
-
-#define DMA0_INT 0x1 /* DMA0 pending interrupt */
-#define DMA1_INT 0x2 /* DMA1 pending interrupt */
-#define DMA2_INT 0x4 /* DMA2 pending interrupt */
-#define DMA3_INT 0x8 /* DMA3 pending interrupt */
-#define DMA4_INT 0x10 /* DMA4 pending interrupt */
-#define DMA5_INT 0x20 /* DMA5 pending interrupt */
-#define DMA6_INT 0x40 /* DMA6 pending interrupt */
-#define DMA7_INT 0x80 /* DMA7 pending interrupt */
-
-/* Bit masks for USB_DMAxCONTROL */
-
-#define DMA_ENA 0x1 /* DMA enable */
-#define DIRECTION 0x2 /* direction of DMA transfer */
-#define MODE 0x4 /* DMA Bus error */
-#define INT_ENA 0x8 /* Interrupt enable */
-#define EPNUM 0xf0 /* EP number */
-#define BUSERROR 0x100 /* DMA Bus error */
-
-/* Bit masks for USB_DMAxADDRHIGH */
-
-#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxADDRLOW */
-
-#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTHIGH */
-
-#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTLOW */
-
-#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for HMDMAx_CONTROL */
-
-#define HMDMAEN 0x1 /* Handshake MDMA Enable */
-#define REP 0x2 /* Handshake MDMA Request Polarity */
-#define UTE 0x8 /* Urgency Threshold Enable */
-#define OIE 0x10 /* Overflow Interrupt Enable */
-#define BDIE 0x20 /* Block Done Interrupt Enable */
-#define MBDI 0x40 /* Mask Block Done Interrupt */
-#define DRQ 0x300 /* Handshake MDMA Request Type */
-#define RBC 0x1000 /* Force Reload of BCOUNT */
-#define PS 0x2000 /* Pin Status */
-#define OI 0x4000 /* Overflow Interrupt Generated */
-#define BDI 0x8000 /* Block Done Interrupt Generated */
-
-/* ******************************************* */
-/* MULTI BIT MACRO ENUMERATIONS */
-/* ******************************************* */
-
-
#endif /* _DEF_BF548_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
index f7f0435..5a04e6d 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -10,121 +10,13 @@
/* Include all Core registers and bit definitions */
#include <asm/def_LPBlackfin.h>
-
/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */
#include "defBF54x_base.h"
-/* The following are the #defines needed by ADSP-BF549 that are not in the common header */
-
-/* Timer Registers */
-
-#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */
-#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */
-#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */
-#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */
-#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */
-#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */
-#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */
-#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */
-#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */
-#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */
-#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */
-#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */
-
-/* Timer Group of 3 Registers */
-
-#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */
-#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */
-#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */
-
-/* SPORT0 Registers */
-
-#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */
-#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */
-#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */
-#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */
-#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */
-#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */
-#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */
-#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */
-#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */
-#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */
-#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */
-#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */
-#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */
-#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */
-#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */
-#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */
-#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */
-#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */
-#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */
-#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */
-#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */
-#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */
-
-/* EPPI0 Registers */
-
-#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */
-#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */
-#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */
-#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */
-#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */
-#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */
-#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */
-#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */
-#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */
-#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */
-#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */
-#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */
-#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */
-#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */
-
-/* UART2 Registers */
-
-#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */
-#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */
-#define UART2_GCTL 0xffc02108 /* Global Control Register */
-#define UART2_LCR 0xffc0210c /* Line Control Register */
-#define UART2_MCR 0xffc02110 /* Modem Control Register */
-#define UART2_LSR 0xffc02114 /* Line Status Register */
-#define UART2_MSR 0xffc02118 /* Modem Status Register */
-#define UART2_SCR 0xffc0211c /* Scratch Register */
-#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */
-#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */
-#define UART2_RBR 0xffc0212c /* Receive Buffer Register */
-
-/* Two Wire Interface Registers (TWI1) */
-
-#define TWI1_REGBASE 0xffc02200
-#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */
-#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */
-#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */
-#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */
-#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */
-#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */
-#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */
-#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */
-#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */
-#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */
-#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */
-#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */
-#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */
-#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */
-#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */
-#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */
-
-/* SPI2 Registers */
-
-#define SPI2_REGBASE 0xffc02400
-#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */
-#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */
-#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */
-#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */
-#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */
-#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */
-#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */
+/* The BF549 is like the BF544, but has MXVR */
+#include "defBF547.h"
/* MXVR Registers */
@@ -296,2418 +188,4 @@
#define MXVR_PIN_CTL 0xffc028dc /* MXVR Pin Control Register */
#define MXVR_SCLK_CNT 0xffc028e0 /* MXVR System Clock Counter Register */
-/* CAN Controller 1 Config 1 Registers */
-
-#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */
-#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */
-#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */
-#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */
-#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */
-#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */
-#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */
-#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */
-#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */
-#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */
-#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */
-#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */
-#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */
-
-/* CAN Controller 1 Config 2 Registers */
-
-#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */
-#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */
-#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */
-#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */
-#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */
-#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */
-#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */
-#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */
-#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */
-#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */
-#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */
-#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */
-#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */
-
-/* CAN Controller 1 Clock/Interrupt/Counter Registers */
-
-#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */
-#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */
-#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */
-#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */
-#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */
-#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */
-#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */
-#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */
-#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */
-#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */
-#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */
-#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */
-#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */
-#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */
-#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */
-#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */
-
-/* CAN Controller 1 Mailbox Acceptance Registers */
-
-#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */
-#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */
-#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */
-#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */
-#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */
-#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */
-#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */
-#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */
-#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */
-#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */
-#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */
-#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */
-#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */
-#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */
-#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */
-#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */
-#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */
-#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */
-#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */
-#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */
-#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */
-#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */
-#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */
-#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */
-#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */
-#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */
-#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */
-#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */
-#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */
-#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */
-#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */
-#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */
-
-/* CAN Controller 1 Mailbox Acceptance Registers */
-
-#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */
-#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */
-#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */
-#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */
-#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */
-#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */
-#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */
-#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */
-#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */
-#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */
-#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */
-#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */
-#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */
-#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */
-#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */
-#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */
-#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */
-#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */
-#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */
-#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */
-#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */
-#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */
-#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */
-#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */
-#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */
-#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */
-#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */
-#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */
-#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */
-#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */
-#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */
-#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */
-
-/* CAN Controller 1 Mailbox Data Registers */
-
-#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */
-#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */
-#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */
-#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */
-#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */
-#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */
-#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */
-#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */
-#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */
-#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */
-#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */
-#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */
-#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */
-#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */
-#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */
-#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */
-#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */
-#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */
-#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */
-#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */
-#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */
-#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */
-#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */
-#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */
-#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */
-#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */
-#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */
-#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */
-#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */
-#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */
-#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */
-#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */
-#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */
-#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */
-#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */
-#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */
-#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */
-#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */
-#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */
-#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */
-#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */
-#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */
-#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */
-#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */
-#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */
-#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */
-#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */
-#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */
-#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */
-#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */
-#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */
-#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */
-#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */
-#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */
-#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */
-#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */
-#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */
-#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */
-#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */
-#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */
-#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */
-#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */
-#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */
-#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */
-#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */
-#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */
-#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */
-#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */
-#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */
-#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */
-#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */
-#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */
-#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */
-#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */
-#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */
-#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */
-#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */
-#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */
-#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */
-#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */
-#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */
-#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */
-#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */
-#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */
-#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */
-#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */
-#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */
-#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */
-#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */
-#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */
-#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */
-#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */
-#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */
-#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */
-#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */
-#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */
-#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */
-#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */
-#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */
-#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */
-#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */
-#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */
-#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */
-#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */
-#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */
-#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */
-#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */
-#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */
-#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */
-#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */
-#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */
-#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */
-#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */
-#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */
-#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */
-#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */
-#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */
-#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */
-#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */
-#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */
-#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */
-#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */
-#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */
-#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */
-#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */
-#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */
-#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */
-#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */
-
-/* CAN Controller 1 Mailbox Data Registers */
-
-#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */
-#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */
-#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */
-#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */
-#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */
-#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */
-#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */
-#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */
-#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */
-#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */
-#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */
-#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */
-#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */
-#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */
-#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */
-#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */
-#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */
-#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */
-#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */
-#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */
-#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */
-#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */
-#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */
-#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */
-#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */
-#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */
-#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */
-#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */
-#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */
-#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */
-#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */
-#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */
-#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */
-#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */
-#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */
-#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */
-#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */
-#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */
-#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */
-#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */
-#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */
-#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */
-#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */
-#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */
-#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */
-#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */
-#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */
-#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */
-#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */
-#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */
-#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */
-#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */
-#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */
-#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */
-#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */
-#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */
-#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */
-#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */
-#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */
-#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */
-#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */
-#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */
-#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */
-#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */
-#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */
-#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */
-#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */
-#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */
-#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */
-#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */
-#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */
-#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */
-#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */
-#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */
-#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */
-#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */
-#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */
-#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */
-#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */
-#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */
-#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */
-#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */
-#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */
-#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */
-#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */
-#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */
-#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */
-#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */
-#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */
-#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */
-#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */
-#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */
-#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */
-#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */
-#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */
-#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */
-#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */
-#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */
-#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */
-#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */
-#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */
-#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */
-#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */
-#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */
-#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */
-#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */
-#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */
-#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */
-#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */
-#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */
-#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */
-#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */
-#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */
-#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */
-#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */
-#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */
-#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */
-#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */
-#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */
-#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */
-#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */
-#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */
-#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */
-#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */
-#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */
-#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */
-#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */
-#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */
-
-/* ATAPI Registers */
-
-#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */
-#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */
-#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */
-#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */
-#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */
-#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */
-#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */
-#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */
-#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */
-#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */
-#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */
-#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */
-#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */
-#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */
-#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */
-#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */
-#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */
-#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */
-#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */
-#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */
-#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */
-#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */
-#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */
-#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */
-#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */
-
-/* SDH Registers */
-
-#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */
-#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */
-#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */
-#define SDH_COMMAND 0xffc0390c /* SDH Command */
-#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */
-#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */
-#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */
-#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */
-#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */
-#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */
-#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */
-#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */
-#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */
-#define SDH_STATUS 0xffc03934 /* SDH Status */
-#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */
-#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */
-#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */
-#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */
-#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */
-#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */
-#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */
-#define SDH_CFG 0xffc039c8 /* SDH Configuration */
-#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */
-#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */
-#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */
-#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */
-#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */
-#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */
-#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */
-#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */
-#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */
-
-/* HOST Port Registers */
-
-#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */
-#define HOST_STATUS 0xffc03a04 /* HOST Status Register */
-#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */
-
-/* USB Control Registers */
-
-#define USB_FADDR 0xffc03c00 /* Function address register */
-#define USB_POWER 0xffc03c04 /* Power management register */
-#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */
-#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */
-#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */
-#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */
-#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */
-#define USB_FRAME 0xffc03c20 /* USB frame number */
-#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */
-#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */
-#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */
-
-/* USB Packet Control Registers */
-
-#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */
-#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */
-#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */
-#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* USB Endpoint FIFO Registers */
-
-#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */
-#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */
-#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */
-#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */
-#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */
-#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */
-#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */
-#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */
-
-/* USB OTG Control Registers */
-
-#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */
-#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */
-#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */
-
-/* USB Phy Control Registers */
-
-#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */
-#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */
-#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */
-#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */
-#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */
-#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */
-#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */
-#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
-
-/* USB Endpoint 0 Control Registers */
-
-#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */
-#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */
-#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */
-#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */
-#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-
-/* USB Endpoint 1 Control Registers */
-
-#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
-#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */
-#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */
-#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */
-#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */
-#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-
-/* USB Endpoint 2 Control Registers */
-
-#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */
-#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */
-#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */
-#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */
-#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-
-/* USB Endpoint 3 Control Registers */
-
-#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
-#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */
-#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */
-#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */
-#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */
-#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-
-/* USB Endpoint 4 Control Registers */
-
-#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */
-#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */
-#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */
-#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */
-#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-
-/* USB Endpoint 5 Control Registers */
-
-#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
-#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */
-#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */
-#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */
-#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */
-#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-
-/* USB Endpoint 6 Control Registers */
-
-#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */
-#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */
-#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */
-#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */
-#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */
-#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-
-/* USB Endpoint 7 Control Registers */
-
-#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
-#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */
-#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */
-#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */
-#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */
-#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
-#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */
-
-/* USB Channel 0 Config Registers */
-
-#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */
-#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-
-/* USB Channel 1 Config Registers */
-
-#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */
-#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-
-/* USB Channel 2 Config Registers */
-
-#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */
-#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-
-/* USB Channel 3 Config Registers */
-
-#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */
-#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-
-/* USB Channel 4 Config Registers */
-
-#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */
-#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-
-/* USB Channel 5 Config Registers */
-
-#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */
-#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-
-/* USB Channel 6 Config Registers */
-
-#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */
-#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-
-/* USB Channel 7 Config Registers */
-
-#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */
-#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
-
-/* Keypad Registers */
-
-#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */
-#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */
-#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */
-#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */
-#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */
-#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */
-
-/* Pixel Compositor (PIXC) Registers */
-
-#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */
-#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */
-#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */
-#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */
-#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */
-#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */
-#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */
-#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */
-#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */
-#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */
-#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */
-#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */
-#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */
-#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */
-#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */
-#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */
-#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */
-#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */
-#define PIXC_TC 0xffc04450 /* Holds the transparent color value */
-
-/* Handshake MDMA 0 Registers */
-
-#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
-#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
-#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
-#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
-#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
-#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
-
-/* Handshake MDMA 1 Registers */
-
-#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
-#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
-#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
-#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
-#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
-#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
-
-
-/* ********************************************************** */
-/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
-/* and MULTI BIT READ MACROS */
-/* ********************************************************** */
-
-/* Bit masks for PIXC_CTL */
-
-#define PIXC_EN 0x1 /* Pixel Compositor Enable */
-#define OVR_A_EN 0x2 /* Overlay A Enable */
-#define OVR_B_EN 0x4 /* Overlay B Enable */
-#define IMG_FORM 0x8 /* Image Data Format */
-#define OVR_FORM 0x10 /* Overlay Data Format */
-#define OUT_FORM 0x20 /* Output Data Format */
-#define UDS_MOD 0x40 /* Resampling Mode */
-#define TC_EN 0x80 /* Transparent Color Enable */
-#define IMG_STAT 0x300 /* Image FIFO Status */
-#define OVR_STAT 0xc00 /* Overlay FIFO Status */
-#define WM_LVL 0x3000 /* FIFO Watermark Level */
-
-/* Bit masks for PIXC_AHSTART */
-
-#define A_HSTART 0xfff /* Horizontal Start Coordinates */
-
-/* Bit masks for PIXC_AHEND */
-
-#define A_HEND 0xfff /* Horizontal End Coordinates */
-
-/* Bit masks for PIXC_AVSTART */
-
-#define A_VSTART 0x3ff /* Vertical Start Coordinates */
-
-/* Bit masks for PIXC_AVEND */
-
-#define A_VEND 0x3ff /* Vertical End Coordinates */
-
-/* Bit masks for PIXC_ATRANSP */
-
-#define A_TRANSP 0xf /* Transparency Value */
-
-/* Bit masks for PIXC_BHSTART */
-
-#define B_HSTART 0xfff /* Horizontal Start Coordinates */
-
-/* Bit masks for PIXC_BHEND */
-
-#define B_HEND 0xfff /* Horizontal End Coordinates */
-
-/* Bit masks for PIXC_BVSTART */
-
-#define B_VSTART 0x3ff /* Vertical Start Coordinates */
-
-/* Bit masks for PIXC_BVEND */
-
-#define B_VEND 0x3ff /* Vertical End Coordinates */
-
-/* Bit masks for PIXC_BTRANSP */
-
-#define B_TRANSP 0xf /* Transparency Value */
-
-/* Bit masks for PIXC_INTRSTAT */
-
-#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
-#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
-#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
-#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
-
-/* Bit masks for PIXC_RYCON */
-
-#define A11 0x3ff /* A11 in the Coefficient Matrix */
-#define A12 0xffc00 /* A12 in the Coefficient Matrix */
-#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
-#define RY_MULT4 0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_GUCON */
-
-#define A21 0x3ff /* A21 in the Coefficient Matrix */
-#define A22 0xffc00 /* A22 in the Coefficient Matrix */
-#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
-#define GU_MULT4 0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_BVCON */
-
-#define A31 0x3ff /* A31 in the Coefficient Matrix */
-#define A32 0xffc00 /* A32 in the Coefficient Matrix */
-#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
-#define BV_MULT4 0x40000000 /* Multiply Row by 4 */
-
-/* Bit masks for PIXC_CCBIAS */
-
-#define A14 0x3ff /* A14 in the Bias Vector */
-#define A24 0xffc00 /* A24 in the Bias Vector */
-#define A34 0x3ff00000 /* A34 in the Bias Vector */
-
-/* Bit masks for PIXC_TC */
-
-#define RY_TRANS 0xff /* Transparent Color - R/Y Component */
-#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */
-#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */
-
-/* Bit masks for HOST_CONTROL */
-
-#define HOST_EN 0x1 /* Host Enable */
-#define HOST_END 0x2 /* Host Endianess */
-#define DATA_SIZE 0x4 /* Data Size */
-#define HOST_RST 0x8 /* Host Reset */
-#define HRDY_OVR 0x20 /* Host Ready Override */
-#define INT_MODE 0x40 /* Interrupt Mode */
-#define BT_EN 0x80 /* Bus Timeout Enable */
-#define EHW 0x100 /* Enable Host Write */
-#define EHR 0x200 /* Enable Host Read */
-#define BDR 0x400 /* Burst DMA Requests */
-
-/* Bit masks for HOST_STATUS */
-
-#define DMA_READY 0x1 /* DMA Ready */
-#define FIFOFULL 0x2 /* FIFO Full */
-#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define DMA_COMPLETE 0x8 /* DMA Complete */
-#define HSHK 0x10 /* Host Handshake */
-#define TIMEOUT 0x20 /* Host Timeout */
-#define HIRQ 0x40 /* Host Interrupt Request */
-#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define DMA_DIR 0x100 /* DMA Direction */
-#define BTE 0x200 /* Bus Timeout Enabled */
-
-/* Bit masks for HOST_TIMEOUT */
-
-#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */
-
-/* Bit masks for MXVR_CONFIG */
-
-#define MXVREN 0x1 /* MXVR Enable */
-#define MMSM 0x2 /* MXVR Master/Slave Mode Select */
-#define ACTIVE 0x4 /* Active Mode */
-#define SDELAY 0x8 /* Synchronous Data Delay */
-#define NCMRXEN 0x10 /* Normal Control Message Receive Enable */
-#define RWRRXEN 0x20 /* Remote Write Receive Enable */
-#define MTXEN 0x40 /* MXVR Transmit Data Enable */
-#define MTXONB 0x80 /* MXVR Phy Transmitter On */
-#define EPARITY 0x100 /* Even Parity Select */
-#define MSB 0x1e00 /* Master Synchronous Boundary */
-#define APRXEN 0x2000 /* Asynchronous Packet Receive Enable */
-#define WAKEUP 0x4000 /* Wake-Up */
-#define LMECH 0x8000 /* Lock Mechanism Select */
-
-/* Bit masks for MXVR_STATE_0 */
-
-#define NACT 0x1 /* Network Activity */
-#define SBLOCK 0x2 /* Super Block Lock */
-#define FMPLLST 0xc /* Frequency Multiply PLL SM State */
-#define CDRPLLST 0xe0 /* Clock/Data Recovery PLL SM State */
-#define APBSY 0x100 /* Asynchronous Packet Transmit Buffer Busy */
-#define APARB 0x200 /* Asynchronous Packet Arbitrating */
-#define APTX 0x400 /* Asynchronous Packet Transmitting */
-#define APRX 0x800 /* Receiving Asynchronous Packet */
-#define CMBSY 0x1000 /* Control Message Transmit Buffer Busy */
-#define CMARB 0x2000 /* Control Message Arbitrating */
-#define CMTX 0x4000 /* Control Message Transmitting */
-#define CMRX 0x8000 /* Receiving Control Message */
-#define MRXONB 0x10000 /* MRXONB Pin State */
-#define RGSIP 0x20000 /* Remote Get Source In Progress */
-#define DALIP 0x40000 /* Resource Deallocate In Progress */
-#define ALIP 0x80000 /* Resource Allocate In Progress */
-#define RRDIP 0x100000 /* Remote Read In Progress */
-#define RWRIP 0x200000 /* Remote Write In Progress */
-#define FLOCK 0x400000 /* Frame Lock */
-#define BLOCK 0x800000 /* Block Lock */
-#define RSB 0xf000000 /* Received Synchronous Boundary */
-#define DERRNUM 0xf0000000 /* DMA Error Channel Number */
-
-/* Bit masks for MXVR_STATE_1 */
-
-#define SRXNUMB 0xf /* Synchronous Receive FIFO Number of Bytes */
-#define STXNUMB 0xf0 /* Synchronous Transmit FIFO Number of Bytes */
-#define APCONT 0x100 /* Asynchronous Packet Continuation */
-#define OBERRNUM 0xe00 /* DMA Out of Bounds Error Channel Number */
-#define DMAACTIVE0 0x10000 /* DMA0 Active */
-#define DMAACTIVE1 0x20000 /* DMA1 Active */
-#define DMAACTIVE2 0x40000 /* DMA2 Active */
-#define DMAACTIVE3 0x80000 /* DMA3 Active */
-#define DMAACTIVE4 0x100000 /* DMA4 Active */
-#define DMAACTIVE5 0x200000 /* DMA5 Active */
-#define DMAACTIVE6 0x400000 /* DMA6 Active */
-#define DMAACTIVE7 0x800000 /* DMA7 Active */
-#define DMAPMEN0 0x1000000 /* DMA0 Pattern Matching Enabled */
-#define DMAPMEN1 0x2000000 /* DMA1 Pattern Matching Enabled */
-#define DMAPMEN2 0x4000000 /* DMA2 Pattern Matching Enabled */
-#define DMAPMEN3 0x8000000 /* DMA3 Pattern Matching Enabled */
-#define DMAPMEN4 0x10000000 /* DMA4 Pattern Matching Enabled */
-#define DMAPMEN5 0x20000000 /* DMA5 Pattern Matching Enabled */
-#define DMAPMEN6 0x40000000 /* DMA6 Pattern Matching Enabled */
-#define DMAPMEN7 0x80000000 /* DMA7 Pattern Matching Enabled */
-
-/* Bit masks for MXVR_INT_STAT_0 */
-
-#define NI2A 0x1 /* Network Inactive to Active */
-#define NA2I 0x2 /* Network Active to Inactive */
-#define SBU2L 0x4 /* Super Block Unlock to Lock */
-#define SBL2U 0x8 /* Super Block Lock to Unlock */
-#define PRU 0x10 /* Position Register Updated */
-#define MPRU 0x20 /* Maximum Position Register Updated */
-#define DRU 0x40 /* Delay Register Updated */
-#define MDRU 0x80 /* Maximum Delay Register Updated */
-#define SBU 0x100 /* Synchronous Boundary Updated */
-#define ATU 0x200 /* Allocation Table Updated */
-#define FCZ0 0x400 /* Frame Counter 0 Zero */
-#define FCZ1 0x800 /* Frame Counter 1 Zero */
-#define PERR 0x1000 /* Parity Error */
-#define MH2L 0x2000 /* MRXONB High to Low */
-#define ML2H 0x4000 /* MRXONB Low to High */
-#define WUP 0x8000 /* Wake-Up Preamble Received */
-#define FU2L 0x10000 /* Frame Unlock to Lock */
-#define FL2U 0x20000 /* Frame Lock to Unlock */
-#define BU2L 0x40000 /* Block Unlock to Lock */
-#define BL2U 0x80000 /* Block Lock to Unlock */
-#define OBERR 0x100000 /* DMA Out of Bounds Error */
-#define PFL 0x200000 /* PLL Frequency Locked */
-#define SCZ 0x400000 /* System Clock Counter Zero */
-#define FERR 0x800000 /* FIFO Error */
-#define CMR 0x1000000 /* Control Message Received */
-#define CMROF 0x2000000 /* Control Message Receive Buffer Overflow */
-#define CMTS 0x4000000 /* Control Message Transmit Buffer Successfully Sent */
-#define CMTC 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled */
-#define RWRC 0x10000000 /* Remote Write Control Message Completed */
-#define BCZ 0x20000000 /* Block Counter Zero */
-#define BMERR 0x40000000 /* Biphase Mark Coding Error */
-#define DERR 0x80000000 /* DMA Error */
-
-/* Bit masks for MXVR_INT_STAT_1 */
-
-#define HDONE0 0x1 /* DMA0 Half Done */
-#define DONE0 0x2 /* DMA0 Done */
-#define APR 0x4 /* Asynchronous Packet Received */
-#define APROF 0x8 /* Asynchronous Packet Receive Buffer Overflow */
-#define HDONE1 0x10 /* DMA1 Half Done */
-#define DONE1 0x20 /* DMA1 Done */
-#define APTS 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent */
-#define APTC 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled */
-#define HDONE2 0x100 /* DMA2 Half Done */
-#define DONE2 0x200 /* DMA2 Done */
-#define APRCE 0x400 /* Asynchronous Packet Receive CRC Error */
-#define APRPE 0x800 /* Asynchronous Packet Receive Packet Error */
-#define HDONE3 0x1000 /* DMA3 Half Done */
-#define DONE3 0x2000 /* DMA3 Done */
-#define HDONE4 0x10000 /* DMA4 Half Done */
-#define DONE4 0x20000 /* DMA4 Done */
-#define HDONE5 0x100000 /* DMA5 Half Done */
-#define DONE5 0x200000 /* DMA5 Done */
-#define HDONE6 0x1000000 /* DMA6 Half Done */
-#define DONE6 0x2000000 /* DMA6 Done */
-#define HDONE7 0x10000000 /* DMA7 Half Done */
-#define DONE7 0x20000000 /* DMA7 Done */
-
-/* Bit masks for MXVR_INT_EN_0 */
-
-#define NI2AEN 0x1 /* Network Inactive to Active Interrupt Enable */
-#define NA2IEN 0x2 /* Network Active to Inactive Interrupt Enable */
-#define SBU2LEN 0x4 /* Super Block Unlock to Lock Interrupt Enable */
-#define SBL2UEN 0x8 /* Super Block Lock to Unlock Interrupt Enable */
-#define PRUEN 0x10 /* Position Register Updated Interrupt Enable */
-#define MPRUEN 0x20 /* Maximum Position Register Updated Interrupt Enable */
-#define DRUEN 0x40 /* Delay Register Updated Interrupt Enable */
-#define MDRUEN 0x80 /* Maximum Delay Register Updated Interrupt Enable */
-#define SBUEN 0x100 /* Synchronous Boundary Updated Interrupt Enable */
-#define ATUEN 0x200 /* Allocation Table Updated Interrupt Enable */
-#define FCZ0EN 0x400 /* Frame Counter 0 Zero Interrupt Enable */
-#define FCZ1EN 0x800 /* Frame Counter 1 Zero Interrupt Enable */
-#define PERREN 0x1000 /* Parity Error Interrupt Enable */
-#define MH2LEN 0x2000 /* MRXONB High to Low Interrupt Enable */
-#define ML2HEN 0x4000 /* MRXONB Low to High Interrupt Enable */
-#define WUPEN 0x8000 /* Wake-Up Preamble Received Interrupt Enable */
-#define FU2LEN 0x10000 /* Frame Unlock to Lock Interrupt Enable */
-#define FL2UEN 0x20000 /* Frame Lock to Unlock Interrupt Enable */
-#define BU2LEN 0x40000 /* Block Unlock to Lock Interrupt Enable */
-#define BL2UEN 0x80000 /* Block Lock to Unlock Interrupt Enable */
-#define OBERREN 0x100000 /* DMA Out of Bounds Error Interrupt Enable */
-#define PFLEN 0x200000 /* PLL Frequency Locked Interrupt Enable */
-#define SCZEN 0x400000 /* System Clock Counter Zero Interrupt Enable */
-#define FERREN 0x800000 /* FIFO Error Interrupt Enable */
-#define CMREN 0x1000000 /* Control Message Received Interrupt Enable */
-#define CMROFEN 0x2000000 /* Control Message Receive Buffer Overflow Interrupt Enable */
-#define CMTSEN 0x4000000 /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */
-#define CMTCEN 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */
-#define RWRCEN 0x10000000 /* Remote Write Control Message Completed Interrupt Enable */
-#define BCZEN 0x20000000 /* Block Counter Zero Interrupt Enable */
-#define BMERREN 0x40000000 /* Biphase Mark Coding Error Interrupt Enable */
-#define DERREN 0x80000000 /* DMA Error Interrupt Enable */
-
-/* Bit masks for MXVR_INT_EN_1 */
-
-#define HDONEEN0 0x1 /* DMA0 Half Done Interrupt Enable */
-#define DONEEN0 0x2 /* DMA0 Done Interrupt Enable */
-#define APREN 0x4 /* Asynchronous Packet Received Interrupt Enable */
-#define APROFEN 0x8 /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */
-#define HDONEEN1 0x10 /* DMA1 Half Done Interrupt Enable */
-#define DONEEN1 0x20 /* DMA1 Done Interrupt Enable */
-#define APTSEN 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */
-#define APTCEN 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */
-#define HDONEEN2 0x100 /* DMA2 Half Done Interrupt Enable */
-#define DONEEN2 0x200 /* DMA2 Done Interrupt Enable */
-#define APRCEEN 0x400 /* Asynchronous Packet Receive CRC Error Interrupt Enable */
-#define APRPEEN 0x800 /* Asynchronous Packet Receive Packet Error Interrupt Enable */
-#define HDONEEN3 0x1000 /* DMA3 Half Done Interrupt Enable */
-#define DONEEN3 0x2000 /* DMA3 Done Interrupt Enable */
-#define HDONEEN4 0x10000 /* DMA4 Half Done Interrupt Enable */
-#define DONEEN4 0x20000 /* DMA4 Done Interrupt Enable */
-#define HDONEEN5 0x100000 /* DMA5 Half Done Interrupt Enable */
-#define DONEEN5 0x200000 /* DMA5 Done Interrupt Enable */
-#define HDONEEN6 0x1000000 /* DMA6 Half Done Interrupt Enable */
-#define DONEEN6 0x2000000 /* DMA6 Done Interrupt Enable */
-#define HDONEEN7 0x10000000 /* DMA7 Half Done Interrupt Enable */
-#define DONEEN7 0x20000000 /* DMA7 Done Interrupt Enable */
-
-/* Bit masks for MXVR_POSITION */
-
-#define POSITION 0x3f /* Node Position */
-#define PVALID 0x8000 /* Node Position Valid */
-
-/* Bit masks for MXVR_MAX_POSITION */
-
-#define MPOSITION 0x3f /* Maximum Node Position */
-#define MPVALID 0x8000 /* Maximum Node Position Valid */
-
-/* Bit masks for MXVR_DELAY */
-
-#define DELAY 0x3f /* Node Frame Delay */
-#define DVALID 0x8000 /* Node Frame Delay Valid */
-
-/* Bit masks for MXVR_MAX_DELAY */
-
-#define MDELAY 0x3f /* Maximum Node Frame Delay */
-#define MDVALID 0x8000 /* Maximum Node Frame Delay Valid */
-
-/* Bit masks for MXVR_LADDR */
-
-#define LADDR 0xffff /* Logical Address */
-#define LVALID 0x80000000 /* Logical Address Valid */
-
-/* Bit masks for MXVR_GADDR */
-
-#define GADDRL 0xff /* Group Address Lower Byte */
-#define GVALID 0x8000 /* Group Address Valid */
-
-/* Bit masks for MXVR_AADDR */
-
-#define AADDR 0xffff /* Alternate Address */
-#define AVALID 0x80000000 /* Alternate Address Valid */
-
-/* Bit masks for MXVR_ALLOC_0 */
-
-#define CL0 0x7f /* Channel 0 Connection Label */
-#define CIU0 0x80 /* Channel 0 In Use */
-#define CL1 0x7f00 /* Channel 0 Connection Label */
-#define CIU1 0x8000 /* Channel 0 In Use */
-#define CL2 0x7f0000 /* Channel 0 Connection Label */
-#define CIU2 0x800000 /* Channel 0 In Use */
-#define CL3 0x7f000000 /* Channel 0 Connection Label */
-#define CIU3 0x80000000 /* Channel 0 In Use */
-
-/* Bit masks for MXVR_ALLOC_1 */
-
-#define CL4 0x7f /* Channel 4 Connection Label */
-#define CIU4 0x80 /* Channel 4 In Use */
-#define CL5 0x7f00 /* Channel 5 Connection Label */
-#define CIU5 0x8000 /* Channel 5 In Use */
-#define CL6 0x7f0000 /* Channel 6 Connection Label */
-#define CIU6 0x800000 /* Channel 6 In Use */
-#define CL7 0x7f000000 /* Channel 7 Connection Label */
-#define CIU7 0x80000000 /* Channel 7 In Use */
-
-/* Bit masks for MXVR_ALLOC_2 */
-
-#define CL8 0x7f /* Channel 8 Connection Label */
-#define CIU8 0x80 /* Channel 8 In Use */
-#define CL9 0x7f00 /* Channel 9 Connection Label */
-#define CIU9 0x8000 /* Channel 9 In Use */
-#define CL10 0x7f0000 /* Channel 10 Connection Label */
-#define CIU10 0x800000 /* Channel 10 In Use */
-#define CL11 0x7f000000 /* Channel 11 Connection Label */
-#define CIU11 0x80000000 /* Channel 11 In Use */
-
-/* Bit masks for MXVR_ALLOC_3 */
-
-#define CL12 0x7f /* Channel 12 Connection Label */
-#define CIU12 0x80 /* Channel 12 In Use */
-#define CL13 0x7f00 /* Channel 13 Connection Label */
-#define CIU13 0x8000 /* Channel 13 In Use */
-#define CL14 0x7f0000 /* Channel 14 Connection Label */
-#define CIU14 0x800000 /* Channel 14 In Use */
-#define CL15 0x7f000000 /* Channel 15 Connection Label */
-#define CIU15 0x80000000 /* Channel 15 In Use */
-
-/* Bit masks for MXVR_ALLOC_4 */
-
-#define CL16 0x7f /* Channel 16 Connection Label */
-#define CIU16 0x80 /* Channel 16 In Use */
-#define CL17 0x7f00 /* Channel 17 Connection Label */
-#define CIU17 0x8000 /* Channel 17 In Use */
-#define CL18 0x7f0000 /* Channel 18 Connection Label */
-#define CIU18 0x800000 /* Channel 18 In Use */
-#define CL19 0x7f000000 /* Channel 19 Connection Label */
-#define CIU19 0x80000000 /* Channel 19 In Use */
-
-/* Bit masks for MXVR_ALLOC_5 */
-
-#define CL20 0x7f /* Channel 20 Connection Label */
-#define CIU20 0x80 /* Channel 20 In Use */
-#define CL21 0x7f00 /* Channel 21 Connection Label */
-#define CIU21 0x8000 /* Channel 21 In Use */
-#define CL22 0x7f0000 /* Channel 22 Connection Label */
-#define CIU22 0x800000 /* Channel 22 In Use */
-#define CL23 0x7f000000 /* Channel 23 Connection Label */
-#define CIU23 0x80000000 /* Channel 23 In Use */
-
-/* Bit masks for MXVR_ALLOC_6 */
-
-#define CL24 0x7f /* Channel 24 Connection Label */
-#define CIU24 0x80 /* Channel 24 In Use */
-#define CL25 0x7f00 /* Channel 25 Connection Label */
-#define CIU25 0x8000 /* Channel 25 In Use */
-#define CL26 0x7f0000 /* Channel 26 Connection Label */
-#define CIU26 0x800000 /* Channel 26 In Use */
-#define CL27 0x7f000000 /* Channel 27 Connection Label */
-#define CIU27 0x80000000 /* Channel 27 In Use */
-
-/* Bit masks for MXVR_ALLOC_7 */
-
-#define CL28 0x7f /* Channel 28 Connection Label */
-#define CIU28 0x80 /* Channel 28 In Use */
-#define CL29 0x7f00 /* Channel 29 Connection Label */
-#define CIU29 0x8000 /* Channel 29 In Use */
-#define CL30 0x7f0000 /* Channel 30 Connection Label */
-#define CIU30 0x800000 /* Channel 30 In Use */
-#define CL31 0x7f000000 /* Channel 31 Connection Label */
-#define CIU31 0x80000000 /* Channel 31 In Use */
-
-/* Bit masks for MXVR_ALLOC_8 */
-
-#define CL32 0x7f /* Channel 32 Connection Label */
-#define CIU32 0x80 /* Channel 32 In Use */
-#define CL33 0x7f00 /* Channel 33 Connection Label */
-#define CIU33 0x8000 /* Channel 33 In Use */
-#define CL34 0x7f0000 /* Channel 34 Connection Label */
-#define CIU34 0x800000 /* Channel 34 In Use */
-#define CL35 0x7f000000 /* Channel 35 Connection Label */
-#define CIU35 0x80000000 /* Channel 35 In Use */
-
-/* Bit masks for MXVR_ALLOC_9 */
-
-#define CL36 0x7f /* Channel 36 Connection Label */
-#define CIU36 0x80 /* Channel 36 In Use */
-#define CL37 0x7f00 /* Channel 37 Connection Label */
-#define CIU37 0x8000 /* Channel 37 In Use */
-#define CL38 0x7f0000 /* Channel 38 Connection Label */
-#define CIU38 0x800000 /* Channel 38 In Use */
-#define CL39 0x7f000000 /* Channel 39 Connection Label */
-#define CIU39 0x80000000 /* Channel 39 In Use */
-
-/* Bit masks for MXVR_ALLOC_10 */
-
-#define CL40 0x7f /* Channel 40 Connection Label */
-#define CIU40 0x80 /* Channel 40 In Use */
-#define CL41 0x7f00 /* Channel 41 Connection Label */
-#define CIU41 0x8000 /* Channel 41 In Use */
-#define CL42 0x7f0000 /* Channel 42 Connection Label */
-#define CIU42 0x800000 /* Channel 42 In Use */
-#define CL43 0x7f000000 /* Channel 43 Connection Label */
-#define CIU43 0x80000000 /* Channel 43 In Use */
-
-/* Bit masks for MXVR_ALLOC_11 */
-
-#define CL44 0x7f /* Channel 44 Connection Label */
-#define CIU44 0x80 /* Channel 44 In Use */
-#define CL45 0x7f00 /* Channel 45 Connection Label */
-#define CIU45 0x8000 /* Channel 45 In Use */
-#define CL46 0x7f0000 /* Channel 46 Connection Label */
-#define CIU46 0x800000 /* Channel 46 In Use */
-#define CL47 0x7f000000 /* Channel 47 Connection Label */
-#define CIU47 0x80000000 /* Channel 47 In Use */
-
-/* Bit masks for MXVR_ALLOC_12 */
-
-#define CL48 0x7f /* Channel 48 Connection Label */
-#define CIU48 0x80 /* Channel 48 In Use */
-#define CL49 0x7f00 /* Channel 49 Connection Label */
-#define CIU49 0x8000 /* Channel 49 In Use */
-#define CL50 0x7f0000 /* Channel 50 Connection Label */
-#define CIU50 0x800000 /* Channel 50 In Use */
-#define CL51 0x7f000000 /* Channel 51 Connection Label */
-#define CIU51 0x80000000 /* Channel 51 In Use */
-
-/* Bit masks for MXVR_ALLOC_13 */
-
-#define CL52 0x7f /* Channel 52 Connection Label */
-#define CIU52 0x80 /* Channel 52 In Use */
-#define CL53 0x7f00 /* Channel 53 Connection Label */
-#define CIU53 0x8000 /* Channel 53 In Use */
-#define CL54 0x7f0000 /* Channel 54 Connection Label */
-#define CIU54 0x800000 /* Channel 54 In Use */
-#define CL55 0x7f000000 /* Channel 55 Connection Label */
-#define CIU55 0x80000000 /* Channel 55 In Use */
-
-/* Bit masks for MXVR_ALLOC_14 */
-
-#define CL56 0x7f /* Channel 56 Connection Label */
-#define CIU56 0x80 /* Channel 56 In Use */
-#define CL57 0x7f00 /* Channel 57 Connection Label */
-#define CIU57 0x8000 /* Channel 57 In Use */
-#define CL58 0x7f0000 /* Channel 58 Connection Label */
-#define CIU58 0x800000 /* Channel 58 In Use */
-#define CL59 0x7f000000 /* Channel 59 Connection Label */
-#define CIU59 0x80000000 /* Channel 59 In Use */
-
-/* MXVR_SYNC_LCHAN_0 Masks */
-
-#define LCHANPC0 0x0000000Flu
-#define LCHANPC1 0x000000F0lu
-#define LCHANPC2 0x00000F00lu
-#define LCHANPC3 0x0000F000lu
-#define LCHANPC4 0x000F0000lu
-#define LCHANPC5 0x00F00000lu
-#define LCHANPC6 0x0F000000lu
-#define LCHANPC7 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_1 Masks */
-
-#define LCHANPC8 0x0000000Flu
-#define LCHANPC9 0x000000F0lu
-#define LCHANPC10 0x00000F00lu
-#define LCHANPC11 0x0000F000lu
-#define LCHANPC12 0x000F0000lu
-#define LCHANPC13 0x00F00000lu
-#define LCHANPC14 0x0F000000lu
-#define LCHANPC15 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_2 Masks */
-
-#define LCHANPC16 0x0000000Flu
-#define LCHANPC17 0x000000F0lu
-#define LCHANPC18 0x00000F00lu
-#define LCHANPC19 0x0000F000lu
-#define LCHANPC20 0x000F0000lu
-#define LCHANPC21 0x00F00000lu
-#define LCHANPC22 0x0F000000lu
-#define LCHANPC23 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_3 Masks */
-
-#define LCHANPC24 0x0000000Flu
-#define LCHANPC25 0x000000F0lu
-#define LCHANPC26 0x00000F00lu
-#define LCHANPC27 0x0000F000lu
-#define LCHANPC28 0x000F0000lu
-#define LCHANPC29 0x00F00000lu
-#define LCHANPC30 0x0F000000lu
-#define LCHANPC31 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_4 Masks */
-
-#define LCHANPC32 0x0000000Flu
-#define LCHANPC33 0x000000F0lu
-#define LCHANPC34 0x00000F00lu
-#define LCHANPC35 0x0000F000lu
-#define LCHANPC36 0x000F0000lu
-#define LCHANPC37 0x00F00000lu
-#define LCHANPC38 0x0F000000lu
-#define LCHANPC39 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_5 Masks */
-
-#define LCHANPC40 0x0000000Flu
-#define LCHANPC41 0x000000F0lu
-#define LCHANPC42 0x00000F00lu
-#define LCHANPC43 0x0000F000lu
-#define LCHANPC44 0x000F0000lu
-#define LCHANPC45 0x00F00000lu
-#define LCHANPC46 0x0F000000lu
-#define LCHANPC47 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_6 Masks */
-
-#define LCHANPC48 0x0000000Flu
-#define LCHANPC49 0x000000F0lu
-#define LCHANPC50 0x00000F00lu
-#define LCHANPC51 0x0000F000lu
-#define LCHANPC52 0x000F0000lu
-#define LCHANPC53 0x00F00000lu
-#define LCHANPC54 0x0F000000lu
-#define LCHANPC55 0xF0000000lu
-
-
-/* MXVR_SYNC_LCHAN_7 Masks */
-
-#define LCHANPC56 0x0000000Flu
-#define LCHANPC57 0x000000F0lu
-#define LCHANPC58 0x00000F00lu
-#define LCHANPC59 0x0000F000lu
-
-/* Bit masks for MXVR_DMAx_CONFIG */
-
-#define MDMAEN 0x1 /* DMA Channel Enable */
-#define DMADD 0x2 /* DMA Channel Direction */
-#define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */
-#define LCHAN 0x3c0 /* DMA Channel Logical Channel */
-#define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */
-#define BY2SWAPEN 0x800 /* DMA Channel Two Byte Swap Enable */
-#define MFLOW 0x7000 /* DMA Channel Operation Flow */
-#define FIXEDPM 0x80000 /* DMA Channel Fixed Pattern Matching Select */
-#define STARTPAT 0x300000 /* DMA Channel Start Pattern Select */
-#define STOPPAT 0xc00000 /* DMA Channel Stop Pattern Select */
-#define COUNTPOS 0x1c000000 /* DMA Channel Count Position */
-
-/* Bit masks for MXVR_AP_CTL */
-
-#define STARTAP 0x1 /* Start Asynchronous Packet Transmission */
-#define CANCELAP 0x2 /* Cancel Asynchronous Packet Transmission */
-#define RESETAP 0x4 /* Reset Asynchronous Packet Arbitration */
-#define APRBE0 0x4000 /* Asynchronous Packet Receive Buffer Entry 0 */
-#define APRBE1 0x8000 /* Asynchronous Packet Receive Buffer Entry 1 */
-
-/* Bit masks for MXVR_APRB_START_ADDR */
-
-#define MXVR_APRB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Receive Buffer Start Address */
-
-/* Bit masks for MXVR_APRB_CURR_ADDR */
-
-#define MXVR_APRB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Receive Buffer Current Address */
-
-/* Bit masks for MXVR_APTB_START_ADDR */
-
-#define MXVR_APTB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Transmit Buffer Start Address */
-
-/* Bit masks for MXVR_APTB_CURR_ADDR */
-
-#define MXVR_APTB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */
-
-/* Bit masks for MXVR_CM_CTL */
-
-#define STARTCM 0x1 /* Start Control Message Transmission */
-#define CANCELCM 0x2 /* Cancel Control Message Transmission */
-#define CMRBE0 0x10000 /* Control Message Receive Buffer Entry 0 */
-#define CMRBE1 0x20000 /* Control Message Receive Buffer Entry 1 */
-#define CMRBE2 0x40000 /* Control Message Receive Buffer Entry 2 */
-#define CMRBE3 0x80000 /* Control Message Receive Buffer Entry 3 */
-#define CMRBE4 0x100000 /* Control Message Receive Buffer Entry 4 */
-#define CMRBE5 0x200000 /* Control Message Receive Buffer Entry 5 */
-#define CMRBE6 0x400000 /* Control Message Receive Buffer Entry 6 */
-#define CMRBE7 0x800000 /* Control Message Receive Buffer Entry 7 */
-#define CMRBE8 0x1000000 /* Control Message Receive Buffer Entry 8 */
-#define CMRBE9 0x2000000 /* Control Message Receive Buffer Entry 9 */
-#define CMRBE10 0x4000000 /* Control Message Receive Buffer Entry 10 */
-#define CMRBE11 0x8000000 /* Control Message Receive Buffer Entry 11 */
-#define CMRBE12 0x10000000 /* Control Message Receive Buffer Entry 12 */
-#define CMRBE13 0x20000000 /* Control Message Receive Buffer Entry 13 */
-#define CMRBE14 0x40000000 /* Control Message Receive Buffer Entry 14 */
-#define CMRBE15 0x80000000 /* Control Message Receive Buffer Entry 15 */
-
-/* Bit masks for MXVR_CMRB_START_ADDR */
-
-#define MXVR_CMRB_START_ADDR_MASK 0x1fffffe /* Control Message Receive Buffer Start Address */
-
-/* Bit masks for MXVR_CMRB_CURR_ADDR */
-
-#define MXVR_CMRB_CURR_ADDR_MASK 0xffffffff /* Control Message Receive Buffer Current Address */
-
-/* Bit masks for MXVR_CMTB_START_ADDR */
-
-#define MXVR_CMTB_START_ADDR_MASK 0x1fffffe /* Control Message Transmit Buffer Start Address */
-
-/* Bit masks for MXVR_CMTB_CURR_ADDR */
-
-#define MXVR_CMTB_CURR_ADDR_MASK 0xffffffff /* Control Message Transmit Buffer Current Address */
-
-/* Bit masks for MXVR_RRDB_START_ADDR */
-
-#define MXVR_RRDB_START_ADDR_MASK 0x1fffffe /* Remote Read Buffer Start Address */
-
-/* Bit masks for MXVR_RRDB_CURR_ADDR */
-
-#define MXVR_RRDB_CURR_ADDR_MASK 0xffffffff /* Remote Read Buffer Current Address */
-
-/* Bit masks for MXVR_PAT_DATAx */
-
-#define MATCH_DATA_0 0xff /* Pattern Match Data Byte 0 */
-#define MATCH_DATA_1 0xff00 /* Pattern Match Data Byte 1 */
-#define MATCH_DATA_2 0xff0000 /* Pattern Match Data Byte 2 */
-#define MATCH_DATA_3 0xff000000 /* Pattern Match Data Byte 3 */
-
-/* Bit masks for MXVR_PAT_EN_0 */
-
-#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */
-#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */
-#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */
-#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */
-#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */
-#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */
-#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */
-#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */
-#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */
-#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */
-#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */
-#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */
-#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */
-#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */
-#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */
-#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */
-#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */
-#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */
-#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */
-#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */
-#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */
-#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */
-#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */
-#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */
-#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */
-#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */
-#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */
-#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */
-#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
-#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
-#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
-#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
-
-/* Bit masks for MXVR_PAT_EN_1 */
-
-#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */
-#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */
-#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */
-#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */
-#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */
-#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */
-#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */
-#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */
-#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */
-#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */
-#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */
-#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */
-#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */
-#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */
-#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */
-#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */
-#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */
-#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */
-#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */
-#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */
-#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */
-#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */
-#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */
-#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */
-#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */
-#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */
-#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */
-#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */
-#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
-#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
-#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
-#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
-
-/* Bit masks for MXVR_FRAME_CNT_0 */
-
-#define FCNT 0xffff /* Frame Count */
-
-/* Bit masks for MXVR_FRAME_CNT_1 */
-
-#define FCNT 0xffff /* Frame Count */
-
-/* Bit masks for MXVR_ROUTING_0 */
-
-#define TX_CH0 0x3f /* Transmit Channel 0 */
-#define MUTE_CH0 0x80 /* Mute Channel 0 */
-#define TX_CH1 0x3f00 /* Transmit Channel 0 */
-#define MUTE_CH1 0x8000 /* Mute Channel 0 */
-#define TX_CH2 0x3f0000 /* Transmit Channel 0 */
-#define MUTE_CH2 0x800000 /* Mute Channel 0 */
-#define TX_CH3 0x3f000000 /* Transmit Channel 0 */
-#define MUTE_CH3 0x80000000 /* Mute Channel 0 */
-
-/* Bit masks for MXVR_ROUTING_1 */
-
-#define TX_CH4 0x3f /* Transmit Channel 4 */
-#define MUTE_CH4 0x80 /* Mute Channel 4 */
-#define TX_CH5 0x3f00 /* Transmit Channel 5 */
-#define MUTE_CH5 0x8000 /* Mute Channel 5 */
-#define TX_CH6 0x3f0000 /* Transmit Channel 6 */
-#define MUTE_CH6 0x800000 /* Mute Channel 6 */
-#define TX_CH7 0x3f000000 /* Transmit Channel 7 */
-#define MUTE_CH7 0x80000000 /* Mute Channel 7 */
-
-/* Bit masks for MXVR_ROUTING_2 */
-
-#define TX_CH8 0x3f /* Transmit Channel 8 */
-#define MUTE_CH8 0x80 /* Mute Channel 8 */
-#define TX_CH9 0x3f00 /* Transmit Channel 9 */
-#define MUTE_CH9 0x8000 /* Mute Channel 9 */
-#define TX_CH10 0x3f0000 /* Transmit Channel 10 */
-#define MUTE_CH10 0x800000 /* Mute Channel 10 */
-#define TX_CH11 0x3f000000 /* Transmit Channel 11 */
-#define MUTE_CH11 0x80000000 /* Mute Channel 11 */
-
-/* Bit masks for MXVR_ROUTING_3 */
-
-#define TX_CH12 0x3f /* Transmit Channel 12 */
-#define MUTE_CH12 0x80 /* Mute Channel 12 */
-#define TX_CH13 0x3f00 /* Transmit Channel 13 */
-#define MUTE_CH13 0x8000 /* Mute Channel 13 */
-#define TX_CH14 0x3f0000 /* Transmit Channel 14 */
-#define MUTE_CH14 0x800000 /* Mute Channel 14 */
-#define TX_CH15 0x3f000000 /* Transmit Channel 15 */
-#define MUTE_CH15 0x80000000 /* Mute Channel 15 */
-
-/* Bit masks for MXVR_ROUTING_4 */
-
-#define TX_CH16 0x3f /* Transmit Channel 16 */
-#define MUTE_CH16 0x80 /* Mute Channel 16 */
-#define TX_CH17 0x3f00 /* Transmit Channel 17 */
-#define MUTE_CH17 0x8000 /* Mute Channel 17 */
-#define TX_CH18 0x3f0000 /* Transmit Channel 18 */
-#define MUTE_CH18 0x800000 /* Mute Channel 18 */
-#define TX_CH19 0x3f000000 /* Transmit Channel 19 */
-#define MUTE_CH19 0x80000000 /* Mute Channel 19 */
-
-/* Bit masks for MXVR_ROUTING_5 */
-
-#define TX_CH20 0x3f /* Transmit Channel 20 */
-#define MUTE_CH20 0x80 /* Mute Channel 20 */
-#define TX_CH21 0x3f00 /* Transmit Channel 21 */
-#define MUTE_CH21 0x8000 /* Mute Channel 21 */
-#define TX_CH22 0x3f0000 /* Transmit Channel 22 */
-#define MUTE_CH22 0x800000 /* Mute Channel 22 */
-#define TX_CH23 0x3f000000 /* Transmit Channel 23 */
-#define MUTE_CH23 0x80000000 /* Mute Channel 23 */
-
-/* Bit masks for MXVR_ROUTING_6 */
-
-#define TX_CH24 0x3f /* Transmit Channel 24 */
-#define MUTE_CH24 0x80 /* Mute Channel 24 */
-#define TX_CH25 0x3f00 /* Transmit Channel 25 */
-#define MUTE_CH25 0x8000 /* Mute Channel 25 */
-#define TX_CH26 0x3f0000 /* Transmit Channel 26 */
-#define MUTE_CH26 0x800000 /* Mute Channel 26 */
-#define TX_CH27 0x3f000000 /* Transmit Channel 27 */
-#define MUTE_CH27 0x80000000 /* Mute Channel 27 */
-
-/* Bit masks for MXVR_ROUTING_7 */
-
-#define TX_CH28 0x3f /* Transmit Channel 28 */
-#define MUTE_CH28 0x80 /* Mute Channel 28 */
-#define TX_CH29 0x3f00 /* Transmit Channel 29 */
-#define MUTE_CH29 0x8000 /* Mute Channel 29 */
-#define TX_CH30 0x3f0000 /* Transmit Channel 30 */
-#define MUTE_CH30 0x800000 /* Mute Channel 30 */
-#define TX_CH31 0x3f000000 /* Transmit Channel 31 */
-#define MUTE_CH31 0x80000000 /* Mute Channel 31 */
-
-/* Bit masks for MXVR_ROUTING_8 */
-
-#define TX_CH32 0x3f /* Transmit Channel 32 */
-#define MUTE_CH32 0x80 /* Mute Channel 32 */
-#define TX_CH33 0x3f00 /* Transmit Channel 33 */
-#define MUTE_CH33 0x8000 /* Mute Channel 33 */
-#define TX_CH34 0x3f0000 /* Transmit Channel 34 */
-#define MUTE_CH34 0x800000 /* Mute Channel 34 */
-#define TX_CH35 0x3f000000 /* Transmit Channel 35 */
-#define MUTE_CH35 0x80000000 /* Mute Channel 35 */
-
-/* Bit masks for MXVR_ROUTING_9 */
-
-#define TX_CH36 0x3f /* Transmit Channel 36 */
-#define MUTE_CH36 0x80 /* Mute Channel 36 */
-#define TX_CH37 0x3f00 /* Transmit Channel 37 */
-#define MUTE_CH37 0x8000 /* Mute Channel 37 */
-#define TX_CH38 0x3f0000 /* Transmit Channel 38 */
-#define MUTE_CH38 0x800000 /* Mute Channel 38 */
-#define TX_CH39 0x3f000000 /* Transmit Channel 39 */
-#define MUTE_CH39 0x80000000 /* Mute Channel 39 */
-
-/* Bit masks for MXVR_ROUTING_10 */
-
-#define TX_CH40 0x3f /* Transmit Channel 40 */
-#define MUTE_CH40 0x80 /* Mute Channel 40 */
-#define TX_CH41 0x3f00 /* Transmit Channel 41 */
-#define MUTE_CH41 0x8000 /* Mute Channel 41 */
-#define TX_CH42 0x3f0000 /* Transmit Channel 42 */
-#define MUTE_CH42 0x800000 /* Mute Channel 42 */
-#define TX_CH43 0x3f000000 /* Transmit Channel 43 */
-#define MUTE_CH43 0x80000000 /* Mute Channel 43 */
-
-/* Bit masks for MXVR_ROUTING_11 */
-
-#define TX_CH44 0x3f /* Transmit Channel 44 */
-#define MUTE_CH44 0x80 /* Mute Channel 44 */
-#define TX_CH45 0x3f00 /* Transmit Channel 45 */
-#define MUTE_CH45 0x8000 /* Mute Channel 45 */
-#define TX_CH46 0x3f0000 /* Transmit Channel 46 */
-#define MUTE_CH46 0x800000 /* Mute Channel 46 */
-#define TX_CH47 0x3f000000 /* Transmit Channel 47 */
-#define MUTE_CH47 0x80000000 /* Mute Channel 47 */
-
-/* Bit masks for MXVR_ROUTING_12 */
-
-#define TX_CH48 0x3f /* Transmit Channel 48 */
-#define MUTE_CH48 0x80 /* Mute Channel 48 */
-#define TX_CH49 0x3f00 /* Transmit Channel 49 */
-#define MUTE_CH49 0x8000 /* Mute Channel 49 */
-#define TX_CH50 0x3f0000 /* Transmit Channel 50 */
-#define MUTE_CH50 0x800000 /* Mute Channel 50 */
-#define TX_CH51 0x3f000000 /* Transmit Channel 51 */
-#define MUTE_CH51 0x80000000 /* Mute Channel 51 */
-
-/* Bit masks for MXVR_ROUTING_13 */
-
-#define TX_CH52 0x3f /* Transmit Channel 52 */
-#define MUTE_CH52 0x80 /* Mute Channel 52 */
-#define TX_CH53 0x3f00 /* Transmit Channel 53 */
-#define MUTE_CH53 0x8000 /* Mute Channel 53 */
-#define TX_CH54 0x3f0000 /* Transmit Channel 54 */
-#define MUTE_CH54 0x800000 /* Mute Channel 54 */
-#define TX_CH55 0x3f000000 /* Transmit Channel 55 */
-#define MUTE_CH55 0x80000000 /* Mute Channel 55 */
-
-/* Bit masks for MXVR_ROUTING_14 */
-
-#define TX_CH56 0x3f /* Transmit Channel 56 */
-#define MUTE_CH56 0x80 /* Mute Channel 56 */
-#define TX_CH57 0x3f00 /* Transmit Channel 57 */
-#define MUTE_CH57 0x8000 /* Mute Channel 57 */
-#define TX_CH58 0x3f0000 /* Transmit Channel 58 */
-#define MUTE_CH58 0x800000 /* Mute Channel 58 */
-#define TX_CH59 0x3f000000 /* Transmit Channel 59 */
-#define MUTE_CH59 0x80000000 /* Mute Channel 59 */
-
-/* Bit masks for MXVR_BLOCK_CNT */
-
-#define BCNT 0xffff /* Block Count */
-
-/* Bit masks for MXVR_CLK_CTL */
-
-#define MXTALCEN 0x1 /* MXVR Crystal Oscillator Clock Enable */
-#define MXTALFEN 0x2 /* MXVR Crystal Oscillator Feedback Enable */
-#define MXTALMUL 0x30 /* MXVR Crystal Multiplier */
-#define CLKX3SEL 0x80 /* Clock Generation Source Select */
-#define MMCLKEN 0x100 /* Master Clock Enable */
-#define MMCLKMUL 0x1e00 /* Master Clock Multiplication Factor */
-#define PLLSMPS 0xe000 /* MXVR PLL State Machine Prescaler */
-#define MBCLKEN 0x10000 /* Bit Clock Enable */
-#define MBCLKDIV 0x1e0000 /* Bit Clock Divide Factor */
-#define INVRX 0x800000 /* Invert Receive Data */
-#define MFSEN 0x1000000 /* Frame Sync Enable */
-#define MFSDIV 0x1e000000 /* Frame Sync Divide Factor */
-#define MFSSEL 0x60000000 /* Frame Sync Select */
-#define MFSSYNC 0x80000000 /* Frame Sync Synchronization Select */
-
-/* Bit masks for MXVR_CDRPLL_CTL */
-
-#define CDRSMEN 0x1 /* MXVR CDRPLL State Machine Enable */
-#define CDRRSTB 0x2 /* MXVR CDRPLL Reset */
-#define CDRSVCO 0x4 /* MXVR CDRPLL Start VCO */
-#define CDRMODE 0x8 /* MXVR CDRPLL CDR Mode Select */
-#define CDRSCNT 0x3f0 /* MXVR CDRPLL Start Counter */
-#define CDRLCNT 0xfc00 /* MXVR CDRPLL Lock Counter */
-#define CDRSHPSEL 0x3f0000 /* MXVR CDRPLL Shaper Select */
-#define CDRSHPEN 0x800000 /* MXVR CDRPLL Shaper Enable */
-#define CDRCPSEL 0xff000000 /* MXVR CDRPLL Charge Pump Current Select */
-
-/* Bit masks for MXVR_FMPLL_CTL */
-
-#define FMSMEN 0x1 /* MXVR FMPLL State Machine Enable */
-#define FMRSTB 0x2 /* MXVR FMPLL Reset */
-#define FMSVCO 0x4 /* MXVR FMPLL Start VCO */
-#define FMSCNT 0x3f0 /* MXVR FMPLL Start Counter */
-#define FMLCNT 0xfc00 /* MXVR FMPLL Lock Counter */
-#define FMCPSEL 0xff000000 /* MXVR FMPLL Charge Pump Current Select */
-
-/* Bit masks for MXVR_PIN_CTL */
-
-#define MTXONBOD 0x1 /* MTXONB Open Drain Select */
-#define MTXONBG 0x2 /* MTXONB Gates MTX Select */
-#define MFSOE 0x10 /* MFS Output Enable */
-#define MFSGPSEL 0x20 /* MFS General Purpose Output Select */
-#define MFSGPDAT 0x40 /* MFS General Purpose Output Data */
-
-/* Bit masks for MXVR_SCLK_CNT */
-
-#define SCNT 0xffff /* System Clock Count */
-
-/* Bit masks for KPAD_CTL */
-
-#define KPAD_EN 0x1 /* Keypad Enable */
-#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
-#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
-#define KPAD_COLEN 0xe000 /* Column Enable Width */
-
-/* Bit masks for KPAD_PRESCALE */
-
-#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */
-
-/* Bit masks for KPAD_MSEL */
-
-#define DBON_SCALE 0xff /* Debounce Scale Value */
-#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */
-
-/* Bit masks for KPAD_ROWCOL */
-
-#define KPAD_ROW 0xff /* Rows Pressed */
-#define KPAD_COL 0xff00 /* Columns Pressed */
-
-/* Bit masks for KPAD_STAT */
-
-#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
-#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
-#define KPAD_PRESSED 0x8 /* Key press current status */
-
-/* Bit masks for KPAD_SOFTEVAL */
-
-#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
-
-/* Bit masks for SDH_COMMAND */
-
-#define CMD_IDX 0x3f /* Command Index */
-#define CMD_RSP 0x40 /* Response */
-#define CMD_L_RSP 0x80 /* Long Response */
-#define CMD_INT_E 0x100 /* Command Interrupt */
-#define CMD_PEND_E 0x200 /* Command Pending */
-#define CMD_E 0x400 /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define PWR_ON 0x3 /* Power On */
-#if 0
-#define TBD 0x3c /* TBD */
-#endif
-#define SD_CMD_OD 0x40 /* Open Drain Output */
-#define ROD_CTL 0x80 /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define CLKDIV 0xff /* MC_CLK Divisor */
-#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
-#define PWR_SV_E 0x200 /* Power Save Enable */
-#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
-#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define RESP_CMD 0x3f /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define DTX_E 0x1 /* Data Transfer Enable */
-#define DTX_DIR 0x2 /* Data Transfer Direction */
-#define DTX_MODE 0x4 /* Data Transfer Mode */
-#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
-#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
-#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
-#define CMD_TIME_OUT 0x4 /* CMD Time Out */
-#define DAT_TIME_OUT 0x8 /* Data Time Out */
-#define TX_UNDERRUN 0x10 /* Transmit Underrun */
-#define RX_OVERRUN 0x20 /* Receive Overrun */
-#define CMD_RESP_END 0x40 /* CMD Response End */
-#define CMD_SENT 0x80 /* CMD Sent */
-#define DAT_END 0x100 /* Data End */
-#define START_BIT_ERR 0x200 /* Start Bit Error */
-#define DAT_BLK_END 0x400 /* Data Block End */
-#define CMD_ACT 0x800 /* CMD Active */
-#define TX_ACT 0x1000 /* Transmit Active */
-#define RX_ACT 0x2000 /* Receive Active */
-#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
-#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
-#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
-#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
-#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
-#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
-#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
-#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
-#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
-#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
-#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
-#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
-#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
-#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
-#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
-#define DAT_END_STAT 0x100 /* Data End Status */
-#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
-#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
-#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
-#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
-#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
-#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
-#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
-#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
-#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
-#define DAT_END_MASK 0x100 /* Data End Mask */
-#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
-#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
-#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
-#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
-#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
-#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
-#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
-#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
-#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
-#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
-#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
-#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
-#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define FIFO_COUNT 0x7fff /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
-#define SD_CARD_DET 0x10 /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
-#define SCD_MSK 0x40 /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define CLKS_EN 0x1 /* Clocks Enable */
-#define SD4E 0x4 /* SDIO 4-Bit Enable */
-#define MWE 0x8 /* Moving Window Enable */
-#define SD_RST 0x10 /* SDMMC Reset */
-#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
-#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
-#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define RWR 0x1 /* Read Wait Request */
-
-/* Bit masks for ATAPI_CONTROL */
-
-#define PIO_START 0x1 /* Start PIO/Reg Op */
-#define MULTI_START 0x2 /* Start Multi-DMA Op */
-#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
-#define XFER_DIR 0x8 /* Transfer Direction */
-#define IORDY_EN 0x10 /* IORDY Enable */
-#define FIFO_FLUSH 0x20 /* Flush FIFOs */
-#define SOFT_RST 0x40 /* Soft Reset */
-#define DEV_RST 0x80 /* Device Reset */
-#define TFRCNT_RST 0x100 /* Trans Count Reset */
-#define END_ON_TERM 0x200 /* End/Terminate Select */
-#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
-#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
-
-/* Bit masks for ATAPI_STATUS */
-
-#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
-#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
-#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
-#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
-
-/* Bit masks for ATAPI_DEV_ADDR */
-
-#define DEV_ADDR 0x1f /* Device Address */
-
-/* Bit masks for ATAPI_INT_MASK */
-
-#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
-#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
-#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
-#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
-#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
-#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
-#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
-#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
-
-/* Bit masks for ATAPI_INT_STATUS */
-
-#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
-#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
-#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
-#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
-#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
-#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
-#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
-#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
-
-/* Bit masks for ATAPI_LINE_STATUS */
-
-#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
-#define ATAPI_DASP 0x2 /* Device dasp to host line status */
-#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
-#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
-#define ATAPI_ADDR 0x70 /* ATAPI address line status */
-#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
-#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
-#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
-#define ATAPI_DIORN 0x400 /* ATAPI read line status */
-#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_SM_STATE */
-
-#define PIO_CSTATE 0xf /* PIO mode state machine current state */
-#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
-#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
-#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
-
-/* Bit masks for ATAPI_TERMINATE */
-
-#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
-
-/* Bit masks for ATAPI_REG_TIM_0 */
-
-#define T2_REG 0xff /* End of cycle time for register access transfers */
-#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
-
-/* Bit masks for ATAPI_PIO_TIM_0 */
-
-#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
-#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
-#define T4_REG 0xf000 /* DIOW data hold */
-
-/* Bit masks for ATAPI_PIO_TIM_1 */
-
-#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
-
-/* Bit masks for ATAPI_MULTI_TIM_0 */
-
-#define TD 0xff /* DIOR/DIOW asserted pulsewidth */
-#define TM 0xff00 /* Time from address valid to DIOR/DIOW */
-
-/* Bit masks for ATAPI_MULTI_TIM_1 */
-
-#define TKW 0xff /* Selects DIOW negated pulsewidth */
-#define TKR 0xff00 /* Selects DIOR negated pulsewidth */
-
-/* Bit masks for ATAPI_MULTI_TIM_2 */
-
-#define TH 0xff /* Selects DIOW data hold */
-#define TEOC 0xff00 /* Selects end of cycle for DMA */
-
-/* Bit masks for ATAPI_ULTRA_TIM_0 */
-
-#define TACK 0xff /* Selects setup and hold times for TACK */
-#define TENV 0xff00 /* Selects envelope time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_1 */
-
-#define TDVS 0xff /* Selects data valid setup time */
-#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_2 */
-
-#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
-#define TMLI 0xff00 /* Selects interlock time */
-
-/* Bit masks for ATAPI_ULTRA_TIM_3 */
-
-#define TZAH 0xff /* Selects minimum delay required for output */
-#define READY_PAUSE 0xff00 /* Selects ready to pause */
-
-/* Bit masks for TIMER_ENABLE1 */
-
-#define TIMEN8 0x1 /* Timer 8 Enable */
-#define TIMEN9 0x2 /* Timer 9 Enable */
-#define TIMEN10 0x4 /* Timer 10 Enable */
-
-/* Bit masks for TIMER_DISABLE1 */
-
-#define TIMDIS8 0x1 /* Timer 8 Disable */
-#define TIMDIS9 0x2 /* Timer 9 Disable */
-#define TIMDIS10 0x4 /* Timer 10 Disable */
-
-/* Bit masks for TIMER_STATUS1 */
-
-#define TIMIL8 0x1 /* Timer 8 Interrupt */
-#define TIMIL9 0x2 /* Timer 9 Interrupt */
-#define TIMIL10 0x4 /* Timer 10 Interrupt */
-#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
-#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
-#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
-#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
-#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
-#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
-
-/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
-
-/* Bit masks for USB_FADDR */
-
-#define FUNCTION_ADDRESS 0x7f /* Function address */
-
-/* Bit masks for USB_POWER */
-
-#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
-#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
-#define RESUME_MODE 0x4 /* DMA Mode */
-#define RESET 0x8 /* Reset indicator */
-#define HS_MODE 0x10 /* High Speed mode indicator */
-#define HS_ENABLE 0x20 /* high Speed Enable */
-#define SOFT_CONN 0x40 /* Soft connect */
-#define ISO_UPDATE 0x80 /* Isochronous update */
-
-/* Bit masks for USB_INTRTX */
-
-#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
-#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
-#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
-#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
-#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
-#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
-#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
-#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRRX */
-
-#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
-#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
-#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
-#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
-#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
-#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
-#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
-
-/* Bit masks for USB_INTRTXE */
-
-#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
-#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
-#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
-#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
-#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
-#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
-#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
-#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
-
-/* Bit masks for USB_INTRRXE */
-
-#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
-#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
-#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
-#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
-#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
-#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
-#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
-
-/* Bit masks for USB_INTRUSB */
-
-#define SUSPEND_B 0x1 /* Suspend indicator */
-#define RESUME_B 0x2 /* Resume indicator */
-#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
-#define SOF_B 0x8 /* Start of frame */
-#define CONN_B 0x10 /* Connection indicator */
-#define DISCON_B 0x20 /* Disconnect indicator */
-#define SESSION_REQ_B 0x40 /* Session Request */
-#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
-
-/* Bit masks for USB_INTRUSBE */
-
-#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
-#define RESUME_BE 0x2 /* Resume indicator int enable */
-#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
-#define SOF_BE 0x8 /* Start of frame int enable */
-#define CONN_BE 0x10 /* Connection indicator int enable */
-#define DISCON_BE 0x20 /* Disconnect indicator int enable */
-#define SESSION_REQ_BE 0x40 /* Session Request int enable */
-#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
-
-/* Bit masks for USB_FRAME */
-
-#define FRAME_NUMBER 0x7ff /* Frame number */
-
-/* Bit masks for USB_INDEX */
-
-#define SELECTED_ENDPOINT 0xf /* selected endpoint */
-
-/* Bit masks for USB_GLOBAL_CTL */
-
-#define GLOBAL_ENA 0x1 /* enables USB module */
-#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
-#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
-#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
-#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
-#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
-#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
-#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
-#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
-#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
-#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
-#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
-#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
-#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
-#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
-
-/* Bit masks for USB_OTG_DEV_CTL */
-
-#define SESSION 0x1 /* session indicator */
-#define HOST_REQ 0x2 /* Host negotiation request */
-#define HOST_MODE 0x4 /* indicates USBDRC is a host */
-#define VBUS0 0x8 /* Vbus level indicator[0] */
-#define VBUS1 0x10 /* Vbus level indicator[1] */
-#define LSDEV 0x20 /* Low-speed indicator */
-#define FSDEV 0x40 /* Full or High-speed indicator */
-#define B_DEVICE 0x80 /* A' or 'B' device indicator */
-
-/* Bit masks for USB_OTG_VBUS_IRQ */
-
-#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
-#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
-#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
-#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
-#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
-#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
-
-/* Bit masks for USB_OTG_VBUS_MASK */
-
-#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
-#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
-#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
-#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
-#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
-#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
-
-/* Bit masks for USB_CSR0 */
-
-#define RXPKTRDY 0x1 /* data packet receive indicator */
-#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
-#define STALL_SENT 0x4 /* STALL handshake sent */
-#define DATAEND 0x8 /* Data end indicator */
-#define SETUPEND 0x10 /* Setup end */
-#define SENDSTALL 0x20 /* Send STALL handshake */
-#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
-#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
-#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
-#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
-#define SETUPPKT_H 0x8 /* send Setup token host mode */
-#define ERROR_H 0x10 /* timeout error indicator host mode */
-#define REQPKT_H 0x20 /* Request an IN transaction host mode */
-#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
-#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
-
-/* Bit masks for USB_COUNT0 */
-
-#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
-
-/* Bit masks for USB_NAKLIMIT0 */
-
-#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
-
-/* Bit masks for USB_TX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_RX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_TXCSR */
-
-#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
-#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
-#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
-#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
-#define STALL_SEND_T 0x10 /* issue a Stall handshake */
-#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
-#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
-#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
-#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
-#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
-#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
-#define ISO_T 0x4000 /* enable Isochronous transfers */
-#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
-#define ERROR_TH 0x4 /* error condition host mode */
-#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
-#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
-
-/* Bit masks for USB_TXCOUNT */
-
-#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* Bit masks for USB_RXCSR */
-
-#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
-#define FIFO_FULL_R 0x2 /* FIFO not empty */
-#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
-#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
-#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
-#define STALL_SEND_R 0x20 /* issue a Stall handshake */
-#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
-#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
-#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
-#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
-#define DISNYET_R 0x1000 /* disable Nyet handshakes */
-#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
-#define ISO_R 0x4000 /* enable Isochronous transfers */
-#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
-#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
-#define REQPKT_RH 0x20 /* request an IN transaction host mode */
-#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
-#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
-#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
-#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
-
-/* Bit masks for USB_RXCOUNT */
-
-#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
-
-/* Bit masks for USB_TXTYPE */
-
-#define TARGET_EP_NO_T 0xf /* EP number */
-#define PROTOCOL_T 0xc /* transfer type */
-
-/* Bit masks for USB_TXINTERVAL */
-
-#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
-
-/* Bit masks for USB_RXTYPE */
-
-#define TARGET_EP_NO_R 0xf /* EP number */
-#define PROTOCOL_R 0xc /* transfer type */
-
-/* Bit masks for USB_RXINTERVAL */
-
-#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
-
-/* Bit masks for USB_DMA_INTERRUPT */
-
-#define DMA0_INT 0x1 /* DMA0 pending interrupt */
-#define DMA1_INT 0x2 /* DMA1 pending interrupt */
-#define DMA2_INT 0x4 /* DMA2 pending interrupt */
-#define DMA3_INT 0x8 /* DMA3 pending interrupt */
-#define DMA4_INT 0x10 /* DMA4 pending interrupt */
-#define DMA5_INT 0x20 /* DMA5 pending interrupt */
-#define DMA6_INT 0x40 /* DMA6 pending interrupt */
-#define DMA7_INT 0x80 /* DMA7 pending interrupt */
-
-/* Bit masks for USB_DMAxCONTROL */
-
-#define DMA_ENA 0x1 /* DMA enable */
-#define DIRECTION 0x2 /* direction of DMA transfer */
-#define MODE 0x4 /* DMA Bus error */
-#define INT_ENA 0x8 /* Interrupt enable */
-#define EPNUM 0xf0 /* EP number */
-#define BUSERROR 0x100 /* DMA Bus error */
-
-/* Bit masks for USB_DMAxADDRHIGH */
-
-#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxADDRLOW */
-
-#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTHIGH */
-
-#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTLOW */
-
-#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for HMDMAx_CONTROL */
-
-#define HMDMAEN 0x1 /* Handshake MDMA Enable */
-#define REP 0x2 /* Handshake MDMA Request Polarity */
-#define UTE 0x8 /* Urgency Threshold Enable */
-#define OIE 0x10 /* Overflow Interrupt Enable */
-#define BDIE 0x20 /* Block Done Interrupt Enable */
-#define MBDI 0x40 /* Mask Block Done Interrupt */
-#define DRQ 0x300 /* Handshake MDMA Request Type */
-#define RBC 0x1000 /* Force Reload of BCOUNT */
-#define PS 0x2000 /* Pin Status */
-#define OI 0x4000 /* Overflow Interrupt Generated */
-#define BDI 0x8000 /* Block Done Interrupt Generated */
-
-/* ******************************************* */
-/* MULTI BIT MACRO ENUMERATIONS */
-/* ******************************************* */
-
-/* ************************ */
-/* MXVR Address Offsets */
-/* ************************ */
-
-/* Control Message Receive Buffer (CMRB) Address Offsets */
-
-#define CMRB_STRIDE 0x00000016lu
-
-#define CMRB_DST_OFFSET 0x00000000lu
-#define CMRB_SRC_OFFSET 0x00000002lu
-#define CMRB_DATA_OFFSET 0x00000005lu
-
-/* Control Message Transmit Buffer (CMTB) Address Offsets */
-
-#define CMTB_PRIO_OFFSET 0x00000000lu
-#define CMTB_DST_OFFSET 0x00000002lu
-#define CMTB_SRC_OFFSET 0x00000004lu
-#define CMTB_TYPE_OFFSET 0x00000006lu
-#define CMTB_DATA_OFFSET 0x00000007lu
-
-#define CMTB_ANSWER_OFFSET 0x0000000Alu
-
-#define CMTB_STAT_N_OFFSET 0x00000018lu
-#define CMTB_STAT_A_OFFSET 0x00000016lu
-#define CMTB_STAT_D_OFFSET 0x0000000Elu
-#define CMTB_STAT_R_OFFSET 0x00000014lu
-#define CMTB_STAT_W_OFFSET 0x00000014lu
-#define CMTB_STAT_G_OFFSET 0x00000014lu
-
-/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */
-
-#define APRB_STRIDE 0x00000400lu
-
-#define APRB_DST_OFFSET 0x00000000lu
-#define APRB_LEN_OFFSET 0x00000002lu
-#define APRB_SRC_OFFSET 0x00000004lu
-#define APRB_DATA_OFFSET 0x00000006lu
-
-/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */
-
-#define APTB_PRIO_OFFSET 0x00000000lu
-#define APTB_DST_OFFSET 0x00000002lu
-#define APTB_LEN_OFFSET 0x00000004lu
-#define APTB_SRC_OFFSET 0x00000006lu
-#define APTB_DATA_OFFSET 0x00000008lu
-
-/* Remote Read Buffer (RRDB) Address Offsets */
-
-#define RRDB_WADDR_OFFSET 0x00000100lu
-#define RRDB_WLEN_OFFSET 0x00000101lu
-
-/* **************** */
-/* MXVR Macros */
-/* **************** */
-
-/* MXVR_CONFIG Macros */
-
-#define SET_MSB(x) ( ( (x) & 0xF ) << 9)
-
-/* MXVR_INT_STAT_1 Macros */
-
-#define DONEX(x) (0x00000002 << (4 * (x)))
-#define HDONEX(x) (0x00000001 << (4 * (x)))
-
-/* MXVR_INT_EN_1 Macros */
-
-#define DONEENX(x) (0x00000002 << (4 * (x)))
-#define HDONEENX(x) (0x00000001 << (4 * (x)))
-
-/* MXVR_CDRPLL_CTL Macros */
-
-#define SET_CDRSHPSEL(x) ( ( (x) & 0x3F ) << 16)
-
-/* MXVR_FMPLL_CTL Macros */
-
-#define SET_CDRCPSEL(x) ( ( (x) & 0xFF ) << 24)
-#define SET_FMCPSEL(x) ( ( (x) & 0xFF ) << 24)
-
#endif /* _DEF_BF549_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index 8590c8c..ab04d13 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -1609,44 +1609,6 @@
#define PINT2 0x40000000 /* Pin Interrupt 2 */
#define PINT3 0x80000000 /* Pin Interrupt 3 */
-/* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */
-
-#define DMAEN 0x1 /* DMA Channel Enable */
-#define WNR 0x2 /* DMA Direction */
-#define WDSIZE_8 0x0 /* Transfer Word Size = 8 */
-#define WDSIZE_16 0x4 /* Transfer Word Size = 16 */
-#define WDSIZE_32 0x8 /* Transfer Word Size = 32 */
-#define DMA2D 0x10 /* DMA Mode */
-#define RESTART 0x20 /* Work Unit Transitions */
-#define DI_SEL 0x40 /* Data Interrupt Timing Select */
-#define DI_EN 0x80 /* Data Interrupt Enable */
-
-#define NDSIZE 0xf00 /* Flex Descriptor Size */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-
-#define DMAFLOW 0xf000 /* Next Operation */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
-
-/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
-
-#define DMA_DONE 0x1 /* DMA Completion Interrupt Status */
-#define DMA_ERR 0x2 /* DMA Error Interrupt Status */
-#define DFETCH 0x4 /* DMA Descriptor Fetch */
-#define DMA_RUN 0x8 /* DMA Channel Running */
-
/* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
#define CTYPE 0x40 /* DMA Channel Type */
@@ -1815,10 +1777,6 @@
#define DEB3_MERROR 0x40 /* DEB3 Error (2nd) */
#define CORE_MERROR 0x80 /* Core Error (2nd) */
-/* Bit masks for EBIU_ERRADD */
-
-#define ERROR_ADDRESS 0xffffffff /* Error Address */
-
/* Bit masks for EBIU_RSTCTL */
#define DDRSRESET 0x1 /* DDR soft reset */
@@ -1827,98 +1785,6 @@
#define SRACK 0x10 /* Self-refresh acknowledge */
#define MDDRENABLE 0x20 /* Mobile DDR enable */
-/* Bit masks for EBIU_DDRBRC0 */
-
-#define BRC0 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC1 */
-
-#define BRC1 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC2 */
-
-#define BRC2 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC3 */
-
-#define BRC3 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC4 */
-
-#define BRC4 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC5 */
-
-#define BRC5 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC6 */
-
-#define BRC6 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBRC7 */
-
-#define BRC7 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC0 */
-
-#define BWC0 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC1 */
-
-#define BWC1 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC2 */
-
-#define BWC2 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC3 */
-
-#define BWC3 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC4 */
-
-#define BWC4 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC5 */
-
-#define BWC5 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC6 */
-
-#define BWC6 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRBWC7 */
-
-#define BWC7 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRACCT */
-
-#define ACCT 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRTACT */
-
-#define TECT 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRARCT */
-
-#define ARCT 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC0 */
-
-#define GC0 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC1 */
-
-#define GC1 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC2 */
-
-#define GC2 0xffffffff /* Count */
-
-/* Bit masks for EBIU_DDRGC3 */
-
-#define GC3 0xffffffff /* Count */
-
/* Bit masks for EBIU_DDRMCEN */
#define B0WCENABLE 0x1 /* Bank 0 write count enable */
@@ -2092,12 +1958,6 @@
#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
-/* Bit masks for WDOG_CTL */
-
-#define WDEV 0x6 /* Watchdog Event */
-#define WDEN 0xff0 /* Watchdog Enable */
-#define WDRO 0x8000 /* Watchdog Rolled Over */
-
/* Bit masks for CNT_CONFIG */
#define CNTE 0x1 /* Counter Enable */
@@ -2149,81 +2009,6 @@
#define DPRESCALE 0xf /* Load Counter Register */
-/* Bit masks for RTC_STAT */
-
-#define SECONDS 0x3f /* Seconds */
-#define MINUTES 0xfc0 /* Minutes */
-#define HOURS 0x1f000 /* Hours */
-#define DAY_COUNTER 0xfffe0000 /* Day Counter */
-
-/* Bit masks for RTC_ICTL */
-
-#define STOPWATCH_INTERRUPT_ENABLE 0x1 /* Stopwatch Interrupt Enable */
-#define ALARM_INTERRUPT_ENABLE 0x2 /* Alarm Interrupt Enable */
-#define SECONDS_INTERRUPT_ENABLE 0x4 /* Seconds Interrupt Enable */
-#define MINUTES_INTERRUPT_ENABLE 0x8 /* Minutes Interrupt Enable */
-#define HOURS_INTERRUPT_ENABLE 0x10 /* Hours Interrupt Enable */
-#define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x20 /* 24 Hours Interrupt Enable */
-#define DAY_ALARM_INTERRUPT_ENABLE 0x40 /* Day Alarm Interrupt Enable */
-#define WRITE_COMPLETE_INTERRUPT_ENABLE 0x8000 /* Write Complete Interrupt Enable */
-
-/* Bit masks for RTC_ISTAT */
-
-#define STOPWATCH_EVENT_FLAG 0x1 /* Stopwatch Event Flag */
-#define ALARM_EVENT_FLAG 0x2 /* Alarm Event Flag */
-#define SECONDS_EVENT_FLAG 0x4 /* Seconds Event Flag */
-#define MINUTES_EVENT_FLAG 0x8 /* Minutes Event Flag */
-#define HOURS_EVENT_FLAG 0x10 /* Hours Event Flag */
-#define TWENTY_FOUR_HOURS_EVENT_FLAG 0x20 /* 24 Hours Event Flag */
-#define DAY_ALARM_EVENT_FLAG 0x40 /* Day Alarm Event Flag */
-#define WRITE_PENDING__STATUS 0x4000 /* Write Pending Status */
-#define WRITE_COMPLETE 0x8000 /* Write Complete */
-
-/* Bit masks for RTC_SWCNT */
-
-#define STOPWATCH_COUNT 0xffff /* Stopwatch Count */
-
-/* Bit masks for RTC_ALARM */
-
-#define SECONDS 0x3f /* Seconds */
-#define MINUTES 0xfc0 /* Minutes */
-#define HOURS 0x1f000 /* Hours */
-#define DAY 0xfffe0000 /* Day */
-
-/* Bit masks for RTC_PREN */
-
-#define PREN 0x1 /* Prescaler Enable */
-
-/* Bit masks for OTP_CONTROL */
-
-#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
-#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */
-#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */
-#define FWRTEST 0x2000 /* OTP/Fuse Write Test */
-#define FRDEN 0x4000 /* OTP/Fuse Read Enable */
-#define FWREN 0x8000 /* OTP/Fuse Write Enable */
-
-/* Bit masks for OTP_BEN */
-
-#define FBEN 0xffff /* OTP/Fuse Byte Enable */
-
-/* Bit masks for OTP_STATUS */
-
-#define FCOMP 0x1 /* OTP/Fuse Access Complete */
-#define FERROR 0x2 /* OTP/Fuse Access Error */
-#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */
-#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */
-#define FPGMEN 0x40 /* OTP/Fuse Program Enable */
-
-/* Bit masks for OTP_TIMING */
-
-#define USECDIV 0xff /* Micro Second Divider */
-#define READACC 0x7f00 /* Read Access Time */
-#define CPUMPRL 0x38000 /* Charge Pump Release Time */
-#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */
-#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */
-#define PGMTIME 0xff000000 /* Program Time */
-
/* Bit masks for SECURE_SYSSWT */
#define EMUDABL 0x1 /* Emulation Disable. */
@@ -2252,26 +2037,6 @@
#define AFEXIT 0x10 /* Authentication Firmware Exit */
#define SECSTAT 0xe0 /* Secure Status */
-/* Bit masks for PLL_DIV */
-
-#define CSEL 0x30 /* Core Select */
-#define SSEL 0xf /* System Select */
-#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
-#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
-#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
-#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
-
-/* Bit masks for PLL_CTL */
-
-#define MSEL 0x7e00 /* Multiplier Select */
-#define BYPASS 0x100 /* PLL Bypass Enable */
-#define OUTPUT_DELAY 0x80 /* External Memory Output Delay Enable */
-#define INPUT_DELAY 0x40 /* External Memory Input Delay Enable */
-#define PDWN 0x20 /* Power Down */
-#define STOPCK 0x8 /* Stop Clock */
-#define PLL_OFF 0x2 /* Disable PLL */
-#define DF 0x1 /* Divide Frequency */
-
/* SWRST Masks */
#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
@@ -2279,52 +2044,6 @@
#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
-/* Bit masks for PLL_STAT */
-
-#define PLL_LOCKED 0x20 /* PLL Locked Status */
-#define ACTIVE_PLLDISABLED 0x4 /* Active Mode With PLL Disabled */
-#define FULL_ON 0x2 /* Full-On Mode */
-#define ACTIVE_PLLENABLED 0x1 /* Active Mode With PLL Enabled */
-#define RTCWS 0x400 /* RTC/Reset Wake-Up Status */
-#define CANWS 0x800 /* CAN Wake-Up Status */
-#define USBWS 0x2000 /* USB Wake-Up Status */
-#define KPADWS 0x4000 /* Keypad Wake-Up Status */
-#define ROTWS 0x8000 /* Rotary Wake-Up Status */
-#define GPWS 0x1000 /* General-Purpose Wake-Up Status */
-
-/* Bit masks for VR_CTL */
-
-#define FREQ 0x3 /* Regulator Switching Frequency */
-#define GAIN 0xc /* Voltage Output Level Gain */
-#define VLEV 0xf0 /* Internal Voltage Level */
-#define SCKELOW 0x8000 /* Drive SCKE Low During Reset Enable */
-#define WAKE 0x100 /* RTC/Reset Wake-Up Enable */
-#define CANWE 0x200 /* CAN0/1 Wake-Up Enable */
-#define GPWE 0x400 /* General-Purpose Wake-Up Enable */
-#define USBWE 0x800 /* USB Wake-Up Enable */
-#define KPADWE 0x1000 /* Keypad Wake-Up Enable */
-#define ROTWE 0x2000 /* Rotary Wake-Up Enable */
-
-#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
-#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
-#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
-
-#define GAIN_5 0x0000 /* GAIN = 5*/
-#define GAIN_10 0x0004 /* GAIN = 1*/
-#define GAIN_20 0x0008 /* GAIN = 2*/
-#define GAIN_50 0x000C /* GAIN = 5*/
-
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
/* Bit masks for NFC_CTL */
#define WR_DLY 0xf /* Write Strobe Delay */
@@ -2489,14 +2208,6 @@
#define UCCT 0x40 /* Universal Counter CAN Trigger */
#define UCE 0x80 /* Universal Counter Enable */
-/* Bit masks for CAN0_UCCNT */
-
-#define UCCNT 0xffff /* Universal Counter Count Value */
-
-/* Bit masks for CAN0_UCRC */
-
-#define UCVAL 0xffff /* Universal Counter Reload/Capture Value */
-
/* Bit masks for CAN0_CEC */
#define RXECNT 0xff /* Receive Error Counter */
diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig
index e4bc6d7..1aa529b 100644
--- a/arch/blackfin/mach-bf561/boards/Kconfig
+++ b/arch/blackfin/mach-bf561/boards/Kconfig
@@ -19,4 +19,11 @@
help
CM-BF561 support for EVAL- and DEV-Board.
+config BFIN561_ACVILON
+ bool "BF561-ACVILON"
+ help
+ BF561-ACVILON System On Module support (SO-DIMM 144).
+ For more information about Acvilon BF561 SoM
+ please go to http://www.niistt.ru/
+
endchoice
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
index 3a15255..a5879f7 100644
--- a/arch/blackfin/mach-bf561/boards/Makefile
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -2,6 +2,7 @@
# arch/blackfin/mach-bf561/boards/Makefile
#
+obj-$(CONFIG_BFIN561_ACVILON) += acvilon.o
obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o
obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN561_TEPLA) += tepla.o
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
new file mode 100644
index 0000000..07e8dc8
--- /dev/null
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -0,0 +1,551 @@
+/*
+ * File: arch/blackfin/mach-bf561/acvilon.c
+ * Based on: arch/blackfin/mach-bf561/ezkit.c
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2009 CJSC "NII STT"
+ *
+ * Bugs:
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ *
+ * For more information about Acvilon BF561 SoM please
+ * go to http://www.niistt.ru/
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <asm/cacheflush.h>
+#include <linux/i2c.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Acvilon board";
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
+ [0] = {
+ .start = 0x20000000,
+ .end = 0x20000000 + 0x000fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF15,
+ .end = IRQ_PF15,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct isp1760_platform_data isp1760_priv = {
+ .is_isp1761 = 0,
+ .port1_disable = 0,
+ .bus_width_16 = 1,
+ .port1_otg = 0,
+ .analog_oc = 0,
+ .dack_polarity_high = 0,
+ .dreq_polarity_high = 0,
+};
+
+static struct platform_device bfin_isp1760_device = {
+ .name = "isp1760-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1760_priv,
+ },
+ .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
+ .resource = bfin_isp1760_resources,
+};
+#endif
+
+static struct resource bfin_i2c_pca_resources[] = {
+ {
+ .name = "pca9564-regs",
+ .start = 0x2C000000,
+ .end = 0x2C000000 + 16,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+ }, {
+
+ .start = IRQ_PF8,
+ .end = IRQ_PF8,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+struct i2c_pca9564_pf_platform_data pca9564_platform_data = {
+ .gpio = -1,
+ .i2c_clock_speed = 330000,
+ .timeout = 10000
+};
+
+/* PCA9564 I2C Bus driver */
+static struct platform_device bfin_i2c_pca_device = {
+ .name = "i2c-pca-platform",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_i2c_pca_resources),
+ .resource = bfin_i2c_pca_resources,
+ .dev = {
+ .platform_data = &pca9564_platform_data,
+ }
+};
+
+/* I2C devices fitted. */
+static struct i2c_board_info acvilon_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("ds1339", 0x68),
+ },
+ {
+ I2C_BOARD_INFO("tcn75", 0x49),
+ },
+};
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+static struct platdata_mtd_ram mtd_ram_data = {
+ .mapname = "rootfs(RAM)",
+ .bankwidth = 4,
+};
+
+static struct resource mtd_ram_resource = {
+ .start = 0x4000000,
+ .end = 0x5ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mtd_ram_device = {
+ .name = "mtd-ram",
+ .id = 0,
+ .dev = {
+ .platform_data = &mtd_ram_data,
+ },
+ .num_resources = 1,
+ .resource = &mtd_ram_resource,
+};
+#endif
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+static struct resource smsc911x_resources[] = {
+ {
+ .name = "smsc911x-memory",
+ .start = 0x28000000,
+ .end = 0x28000000 + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .flags = SMSC911X_USE_32BIT,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+ {
+ .start = BFIN_UART_THR,
+ .end = BFIN_UART_GCTL + 2,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_UART_RX,
+ .end = IRQ_UART_RX + 1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART_ERROR,
+ .end = IRQ_UART_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART_TX,
+ .end = CH_UART_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART_RX,
+ .end = CH_UART_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+unsigned short bfin_uart0_peripherals[] = {
+ P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+ .name = "bfin-uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+ .resource = bfin_uart0_resources,
+ .dev = {
+ /* Passed to driver */
+ .platform_data = &bfin_uart0_peripherals,
+ },
+};
+#endif
+#endif
+
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition bfin_plat_nand_partitions[] = {
+ {
+ .name = "params(nand)",
+ .size = 32 * 1024 * 1024,
+ .offset = 0,
+ }, {
+ .name = "userfs(nand)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
+};
+#endif
+
+#define BFIN_NAND_PLAT_CLE 2
+#define BFIN_NAND_PLAT_ALE 3
+
+static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
+ else
+ writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
+}
+
+#define BFIN_NAND_PLAT_READY GPIO_PF10
+static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(BFIN_NAND_PLAT_READY);
+}
+
+static struct platform_nand_data bfin_plat_nand_data = {
+ .chip = {
+ .chip_delay = 30,
+#ifdef CONFIG_MTD_PARTITIONS
+ .part_probe_types = part_probes,
+ .partitions = bfin_plat_nand_partitions,
+ .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
+#endif
+ },
+ .ctrl = {
+ .cmd_ctrl = bfin_plat_nand_cmd_ctrl,
+ .dev_ready = bfin_plat_nand_dev_ready,
+ },
+};
+
+#define MAX(x, y) (x > y ? x : y)
+static struct resource bfin_plat_nand_resources = {
+ .start = 0x24000000,
+ .end = 0x24000000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
+ .flags = IORESOURCE_IO,
+};
+
+static struct platform_device bfin_async_nand_device = {
+ .name = "gen_nand",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_plat_nand_resources,
+ .dev = {
+ .platform_data = &bfin_plat_nand_data,
+ },
+};
+
+static void bfin_plat_nand_init(void)
+{
+ gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
+}
+#else
+static void bfin_plat_nand_init(void)
+{
+}
+#endif
+
+#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = 0x4200,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM},
+ {
+ .name = "u-boot",
+ .size = 0x42000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ {
+ .name = "u-boot(params)",
+ .size = 0x4200,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ {
+ .name = "kernel",
+ .size = 0x294000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ {
+ .name = "params",
+ .size = 0x42000,
+ .offset = MTDPART_OFS_APPEND,
+ },
+ {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+ .name = "SPI Dataflash",
+ .parts = bfin_spi_dataflash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+};
+
+/* DataFlash chip */
+static struct bfin5xx_spi_chip data_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip */
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = IRQ_SPI,
+ .end = IRQ_SPI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
+ },
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 3,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
+#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select */
+ .platform_data = &bfin_spi_dataflash_data,
+ .controller_data = &data_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+static struct resource bfin_gpios_resources = {
+ .start = 31,
+/* .end = MAX_BLACKFIN_GPIOS - 1, */
+ .end = 32,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] = {
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 300000000),
+ VRPAIR(VLEV_095, 313000000),
+ VRPAIR(VLEV_100, 350000000),
+ VRPAIR(VLEV_105, 400000000),
+ VRPAIR(VLEV_110, 444000000),
+ VRPAIR(VLEV_115, 450000000),
+ VRPAIR(VLEV_120, 475000000),
+ VRPAIR(VLEV_125, 500000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */ ,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
+static struct platform_device *acvilon_devices[] __initdata = {
+ &bfin_dpmc,
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#endif
+
+ &bfin_gpios_device,
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+ &smsc911x_device,
+#endif
+
+ &bfin_i2c_pca_device,
+
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+ &bfin_async_nand_device,
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+ &mtd_ram_device,
+#endif
+
+};
+
+static int __init acvilon_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+ bfin_plat_nand_init();
+ ret =
+ platform_add_devices(acvilon_devices, ARRAY_SIZE(acvilon_devices));
+ if (ret < 0)
+ return ret;
+
+ i2c_register_board_info(0, acvilon_i2c_devs,
+ ARRAY_SIZE(acvilon_i2c_devs));
+
+ bfin_write_FIO0_FLAG_C(1 << 14);
+ msleep(5);
+ bfin_write_FIO0_FLAG_S(1 << 14);
+
+ spi_register_board_info(bfin_spi_board_info,
+ ARRAY_SIZE(bfin_spi_board_info));
+ return 0;
+}
+
+arch_initcall(acvilon_init);
+
+static struct platform_device *acvilon_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+ printk(KERN_INFO "register early platform devices\n");
+ early_platform_add_devices(acvilon_early_devices,
+ ARRAY_SIZE(acvilon_early_devices));
+}
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 9e2d8cf..ffd3e6a 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -49,7 +49,7 @@
};
static struct platform_device bfin_isp1760_device = {
- .name = "isp1760-hcd",
+ .name = "isp1760",
.id = 0,
.dev = {
.platform_data = &isp1760_priv,
@@ -159,28 +159,6 @@
};
#endif
-#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
-static struct resource ax88180_resources[] = {
- [0] = {
- .start = 0x2c000000,
- .end = 0x2c000000 + 0x8000,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PF10,
- .end = IRQ_PF10,
- .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
- },
-};
-
-static struct platform_device ax88180_device = {
- .name = "ax88180",
- .id = -1,
- .num_resources = ARRAY_SIZE(ax88180_resources),
- .resource = ax88180_resources,
-};
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
@@ -421,10 +399,6 @@
&smc91x_device,
#endif
-#if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
- &ax88180_device,
-#endif
-
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
&net2272_bfin_device,
#endif
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 1e60a92..deb2271 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -22,8 +22,8 @@
#define CMD_COREB_STOP 3
#define CMD_COREB_RESET 4
-static int
-coreb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long
+coreb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
int ret = 0;
@@ -49,8 +49,8 @@
}
static const struct file_operations coreb_fops = {
- .owner = THIS_MODULE,
- .ioctl = coreb_ioctl,
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = coreb_ioctl,
};
static struct miscdevice coreb_dev = {
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index a31e509..4c8e36b 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -884,65 +884,11 @@
/* System MMR Register Bits */
/******************************************************************************* */
-/* ********************* PLL AND RESET MASKS ************************ */
-
-/* PLL_CTL Masks */
-#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */
-#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */
-#define PLL_OFF 0x00000002 /* Shut off PLL clocks */
-#define STOPCK_OFF 0x00000008 /* Core clock off */
-#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */
-#define BYPASS 0x00000100 /* Bypass the PLL */
-
/* CHIPID Masks */
#define CHIPID_VERSION 0xF0000000
#define CHIPID_FAMILY 0x0FFFF000
#define CHIPID_MANUFACTURE 0x00000FFE
-/* VR_CTL Masks */
-#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
-#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
-#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
-#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
-
-#define GAIN 0x000C /* Voltage Level Gain */
-#define GAIN_5 0x0000 /* GAIN = 5*/
-#define GAIN_10 0x0004 /* GAIN = 1*/
-#define GAIN_20 0x0008 /* GAIN = 2*/
-#define GAIN_50 0x000C /* GAIN = 5*/
-
-#define VLEV 0x00F0 /* Internal Voltage Level */
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
-#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
-
-/* PLL_DIV Masks */
-#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
-
-#define CSEL 0x30 /* Core Select */
-#define SSEL 0xf /* System Select */
-#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */
-#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */
-#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */
-#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */
-
-/* PLL_STAT Masks */
-#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
-#define FULL_ON 0x0002 /* Processor In Full On Mode */
-#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
-#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
-
/* SICA_SYSCR Masks */
#define COREB_SRAM_INIT 0x0020
@@ -1150,53 +1096,6 @@
/* ********** DMA CONTROLLER MASKS *********************8 */
-/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */
-#define DMAEN 0x00000001 /* Channel Enable */
-#define WNR 0x00000002 /* Channel Direction (W/R*) */
-#define WDSIZE_8 0x00000000 /* Word Size 8 bits */
-#define WDSIZE_16 0x00000004 /* Word Size 16 bits */
-#define WDSIZE_32 0x00000008 /* Word Size 32 bits */
-#define DMA2D 0x00000010 /* 2D/1D* Mode */
-#define RESTART 0x00000020 /* Restart */
-#define DI_SEL 0x00000040 /* Data Interrupt Select */
-#define DI_EN 0x00000080 /* Data Interrupt Enable */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-#define NDSIZE 0x00000900 /* Next Descriptor Size */
-#define DMAFLOW 0x00007000 /* Flow Control */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
-
-#define DMAEN_P 0 /* Channel Enable */
-#define WNR_P 1 /* Channel Direction (W/R*) */
-#define DMA2D_P 4 /* 2D/1D* Mode */
-#define RESTART_P 5 /* Restart */
-#define DI_SEL_P 6 /* Data Interrupt Select */
-#define DI_EN_P 7 /* Data Interrupt Enable */
-
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */
-
-#define DMA_DONE 0x00000001 /* DMA Done Indicator */
-#define DMA_ERR 0x00000002 /* DMA Error Indicator */
-#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */
-#define DMA_RUN 0x00000008 /* DMA Running Indicator */
-
-#define DMA_DONE_P 0 /* DMA Done Indicator */
-#define DMA_ERR_P 1 /* DMA Error Indicator */
-#define DFETCH_P 2 /* Descriptor Fetch Indicator */
-#define DMA_RUN_P 3 /* DMA Running Indicator */
-
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE 0x00000040 /* DMA Channel Type Indicator */
diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c
index 510f576..0192532 100644
--- a/arch/blackfin/mach-bf561/smp.c
+++ b/arch/blackfin/mach-bf561/smp.c
@@ -52,8 +52,6 @@
void __cpuinit platform_secondary_init(unsigned int cpu)
{
- local_irq_disable();
-
/* Clone setup for peripheral interrupt sources from CoreA. */
bfin_write_SICB_IMASK0(bfin_read_SICA_IMASK0());
bfin_write_SICB_IMASK1(bfin_read_SICA_IMASK1());
@@ -70,11 +68,6 @@
bfin_write_SICB_IAR7(bfin_read_SICA_IAR7());
SSYNC();
- local_irq_enable();
-
- /* Calibrate loops per jiffy value. */
- calibrate_delay();
-
/* Store CPU-private information to the cpu_data array. */
bfin_setup_cpudata(cpu);
@@ -108,9 +101,13 @@
barrier();
}
- spin_unlock(&boot_lock);
-
- return cpu_isset(cpu, cpu_callin_map) ? 0 : -ENOSYS;
+ if (cpu_isset(cpu, cpu_callin_map)) {
+ cpu_set(cpu, cpu_online_map);
+ /* release the lock and let coreb run */
+ spin_unlock(&boot_lock);
+ return 0;
+ } else
+ panic("CPU%u: processor failed to boot\n", cpu);
}
void __init platform_request_ipi(irq_handler_t handler)
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index ef6870e..d5cfe61 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -13,6 +13,7 @@
#include <asm/dma.h>
#include <asm/clocks.h>
#include <asm/mem_init.h>
+#include <asm/dpmc.h>
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 0150650..7775828 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -13,7 +13,7 @@
#include <linux/fs.h>
#include <asm/blackfin.h>
#include <asm/time.h>
-
+#include <asm/dpmc.h>
/* this is the table of CCLK frequencies, in Hz */
/* .index is the entry in the auxillary dpm_state_table[] */
@@ -138,7 +138,8 @@
dpm_state_table[index].tscale);
}
- policy->cpuinfo.transition_latency = (bfin_read_PLL_LOCKCNT() / (sclk / 1000000)) * 1000;
+ policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
+
/*Now ,only support one cpu */
policy->cur = cclk;
cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index 8009a51..b037168 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -404,6 +404,21 @@
PM_SYS_PUSH(EBIU_FCTL)
#endif
+#ifdef PORTCIO_FER
+ PM_SYS_PUSH16(PORTCIO_DIR)
+ PM_SYS_PUSH16(PORTCIO_INEN)
+ PM_SYS_PUSH16(PORTCIO)
+ PM_SYS_PUSH16(PORTCIO_FER)
+ PM_SYS_PUSH16(PORTDIO_DIR)
+ PM_SYS_PUSH16(PORTDIO_INEN)
+ PM_SYS_PUSH16(PORTDIO)
+ PM_SYS_PUSH16(PORTDIO_FER)
+ PM_SYS_PUSH16(PORTEIO_DIR)
+ PM_SYS_PUSH16(PORTEIO_INEN)
+ PM_SYS_PUSH16(PORTEIO)
+ PM_SYS_PUSH16(PORTEIO_FER)
+#endif
+
PM_SYS_PUSH16(SYSCR)
/* Save Core MMRs */
@@ -716,6 +731,21 @@
P0.L = lo(PLL_CTL);
PM_SYS_POP16(SYSCR)
+#ifdef PORTCIO_FER
+ PM_SYS_POP16(PORTEIO_FER)
+ PM_SYS_POP16(PORTEIO)
+ PM_SYS_POP16(PORTEIO_INEN)
+ PM_SYS_POP16(PORTEIO_DIR)
+ PM_SYS_POP16(PORTDIO_FER)
+ PM_SYS_POP16(PORTDIO)
+ PM_SYS_POP16(PORTDIO_INEN)
+ PM_SYS_POP16(PORTDIO_DIR)
+ PM_SYS_POP16(PORTCIO_FER)
+ PM_SYS_POP16(PORTCIO)
+ PM_SYS_POP16(PORTCIO_INEN)
+ PM_SYS_POP16(PORTCIO_DIR)
+#endif
+
#ifdef EBIU_FCTL
PM_SYS_POP(EBIU_FCTL)
PM_SYS_POP(EBIU_MODE)
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index f3f8bb4..b0ed0b4 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -713,6 +713,8 @@
cc = BITTST(r7, TIF_RESTORE_SIGMASK);
if cc jump .Lsyscall_do_signals;
cc = BITTST(r7, TIF_SIGPENDING);
+ if cc jump .Lsyscall_do_signals;
+ cc = BITTST(r7, TIF_NOTIFY_RESUME);
if !cc jump .Lsyscall_really_exit;
.Lsyscall_do_signals:
/* Reenable interrupts. */
@@ -721,7 +723,7 @@
r0 = sp;
SP += -12;
- call _do_signal;
+ call _do_notify_resume;
SP += 12;
.Lsyscall_really_exit:
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 660ea1b..1873b2c 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -25,11 +25,20 @@
#include <asm/blackfin.h>
#include <asm/gpio.h>
#include <asm/irq_handler.h>
+#include <asm/dpmc.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/bfin_sport.h>
#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1))
#ifdef BF537_FAMILY
# define BF537_GENERIC_ERROR_INT_DEMUX
+# define SPI_ERR_MASK (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE) /* SPI_STAT */
+# define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORT_STAT */
+# define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */
+# define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */
+# define UART_ERR_MASK (0x6) /* UART_IIR */
+# define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */
#else
# undef BF537_GENERIC_ERROR_INT_DEMUX
#endif
@@ -324,11 +333,9 @@
irq = IRQ_CAN_ERROR;
else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
irq = IRQ_SPI_ERROR;
- else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) &&
- (bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0))
+ else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
irq = IRQ_UART0_ERROR;
- else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) &&
- (bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0))
+ else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK)
irq = IRQ_UART1_ERROR;
if (irq) {
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index d92b168..369e687 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -336,13 +336,6 @@
ret = platform_boot_secondary(cpu, idle);
- if (ret) {
- cpu_clear(cpu, cpu_present_map);
- printk(KERN_CRIT "CPU%u: processor failed to boot (%d)\n", cpu, ret);
- free_task(idle);
- } else
- cpu_set(cpu, cpu_online_map);
-
secondary_stack = NULL;
return ret;
@@ -418,9 +411,16 @@
setup_secondary(cpu);
+ platform_secondary_init(cpu);
+
local_irq_enable();
- platform_secondary_init(cpu);
+ /*
+ * Calibrate loops per jiffy value.
+ * IRQs need to be enabled here - D-cache can be invalidated
+ * in timer irq handler, so core B can read correct jiffies.
+ */
+ calibrate_delay();
cpu_idle();
}
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 6f31c94..31be3ac 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -502,7 +502,7 @@
config BFIN_OTP
tristate "Blackfin On-Chip OTP Memory Support"
- depends on BLACKFIN && (BF52x || BF54x)
+ depends on BLACKFIN && (BF51x || BF52x || BF54x)
default y
help
If you say Y here, you will get support for a character device