diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 410eaa9..d2c9734 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -245,6 +245,15 @@
 	---help---
 	Support for Logitech devices that are not fully compliant with HID standard.
 
+config HID_LOGITECH_DJ
+	tristate "Logitech Unifying receivers full support"
+	depends on HID_LOGITECH
+	default m
+	---help---
+	Say Y if you want support for Logitech Unifying receivers and devices.
+	Unifying receivers are capable of pairing up to 6 Logitech compliant
+	devices to the same receiver.
+
 config LOGITECH_FF
 	bool "Logitech force feedback support"
 	depends on HID_LOGITECH
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 77c9e5d..b7ddabb 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -43,6 +43,7 @@
 obj-$(CONFIG_HID_KYE)		+= hid-kye.o
 obj-$(CONFIG_HID_LCPOWER)       += hid-lcpower.o
 obj-$(CONFIG_HID_LOGITECH)	+= hid-logitech.o
+obj-$(CONFIG_HID_LOGITECH_DJ)	+= hid-logitech-dj.o
 obj-$(CONFIG_HID_MAGICMOUSE)    += hid-magicmouse.o
 obj-$(CONFIG_HID_MICROSOFT)	+= hid-microsoft.o
 obj-$(CONFIG_HID_MONTEREY)	+= hid-monterey.o
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 1a5cf0c..ab4ae12 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1419,6 +1419,8 @@
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFP_WHEEL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index ea2c338..3d065d0 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -444,6 +444,8 @@
 #define USB_DEVICE_ID_S510_RECEIVER_2	0xc517
 #define USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500	0xc512
 #define USB_DEVICE_ID_MX3000_RECEIVER	0xc513
+#define USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER	0xc52b
+#define USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2	0xc532
 #define USB_DEVICE_ID_SPACETRAVELLER	0xc623
 #define USB_DEVICE_ID_SPACENAVIGATOR	0xc626
 #define USB_DEVICE_ID_DINOVO_DESKTOP	0xc704
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
new file mode 100644
index 0000000..5bb6f42
--- /dev/null
+++ b/drivers/hid/hid-logitech-dj.c
@@ -0,0 +1,925 @@
+/*
+ *  HID driver for Logitech Unifying receivers
+ *
+ *  Copyright (c) 2011 Logitech
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
+#include "hid-ids.h"
+#include "hid-logitech-dj.h"
+
+/* Keyboard descriptor (1) */
+static const char kbd_descriptor[] = {
+	0x05, 0x01,		/* USAGE_PAGE (generic Desktop)     */
+	0x09, 0x06,		/* USAGE (Keyboard)         */
+	0xA1, 0x01,		/* COLLECTION (Application)     */
+	0x85, 0x01,		/* REPORT_ID (1)            */
+	0x95, 0x08,		/*   REPORT_COUNT (8)           */
+	0x75, 0x01,		/*   REPORT_SIZE (1)            */
+	0x15, 0x00,		/*   LOGICAL_MINIMUM (0)        */
+	0x25, 0x01,		/*   LOGICAL_MAXIMUM (1)        */
+	0x05, 0x07,		/*   USAGE_PAGE (Keyboard)      */
+	0x19, 0xE0,		/*   USAGE_MINIMUM (Left Control)   */
+	0x29, 0xE7,		/*   USAGE_MAXIMUM (Right GUI)      */
+	0x81, 0x02,		/*   INPUT (Data,Var,Abs)       */
+	0x95, 0x05,		/*   REPORT COUNT (5)           */
+	0x05, 0x08,		/*   USAGE PAGE (LED page)      */
+	0x19, 0x01,		/*   USAGE MINIMUM (1)          */
+	0x29, 0x05,		/*   USAGE MAXIMUM (5)          */
+	0x91, 0x02,		/*   OUTPUT (Data, Variable, Absolute)  */
+	0x95, 0x01,		/*   REPORT COUNT (1)           */
+	0x75, 0x03,		/*   REPORT SIZE (3)            */
+	0x91, 0x01,		/*   OUTPUT (Constant)          */
+	0x95, 0x06,		/*   REPORT_COUNT (6)           */
+	0x75, 0x08,		/*   REPORT_SIZE (8)            */
+	0x15, 0x00,		/*   LOGICAL_MINIMUM (0)        */
+	0x26, 0xFF, 0x00,	/*   LOGICAL_MAXIMUM (255)      */
+	0x05, 0x07,		/*   USAGE_PAGE (Keyboard)      */
+	0x19, 0x00,		/*   USAGE_MINIMUM (no event)       */
+	0x2A, 0xFF, 0x00,	/*   USAGE_MAXIMUM (reserved)       */
+	0x81, 0x00,		/*   INPUT (Data,Ary,Abs)       */
+	0xC0
+};
+
+/* Mouse descriptor (2)     */
+static const char mse_descriptor[] = {
+	0x05, 0x01,		/*  USAGE_PAGE (Generic Desktop)        */
+	0x09, 0x02,		/*  USAGE (Mouse)                       */
+	0xA1, 0x01,		/*  COLLECTION (Application)            */
+	0x85, 0x02,		/*    REPORT_ID = 2                     */
+	0x09, 0x01,		/*    USAGE (pointer)                   */
+	0xA1, 0x00,		/*    COLLECTION (physical)             */
+	0x05, 0x09,		/*      USAGE_PAGE (buttons)            */
+	0x19, 0x01,		/*      USAGE_MIN (1)                   */
+	0x29, 0x10,		/*      USAGE_MAX (16)                  */
+	0x15, 0x00,		/*      LOGICAL_MIN (0)                 */
+	0x25, 0x01,		/*      LOGICAL_MAX (1)                 */
+	0x95, 0x10,		/*      REPORT_COUNT (16)               */
+	0x75, 0x01,		/*      REPORT_SIZE (1)                 */
+	0x81, 0x02,		/*      INPUT (data var abs)            */
+	0x05, 0x01,		/*      USAGE_PAGE (generic desktop)    */
+	0x16, 0x01, 0xF8,	/*      LOGICAL_MIN (-2047)             */
+	0x26, 0xFF, 0x07,	/*      LOGICAL_MAX (2047)              */
+	0x75, 0x0C,		/*      REPORT_SIZE (12)                */
+	0x95, 0x02,		/*      REPORT_COUNT (2)                */
+	0x09, 0x30,		/*      USAGE (X)                       */
+	0x09, 0x31,		/*      USAGE (Y)                       */
+	0x81, 0x06,		/*      INPUT                           */
+	0x15, 0x81,		/*      LOGICAL_MIN (-127)              */
+	0x25, 0x7F,		/*      LOGICAL_MAX (127)               */
+	0x75, 0x08,		/*      REPORT_SIZE (8)                 */
+	0x95, 0x01,		/*      REPORT_COUNT (1)                */
+	0x09, 0x38,		/*      USAGE (wheel)                   */
+	0x81, 0x06,		/*      INPUT                           */
+	0x05, 0x0C,		/*      USAGE_PAGE(consumer)            */
+	0x0A, 0x38, 0x02,	/*      USAGE(AC Pan)                   */
+	0x95, 0x01,		/*      REPORT_COUNT (1)                */
+	0x81, 0x06,		/*      INPUT                           */
+	0xC0,			/*    END_COLLECTION                    */
+	0xC0,			/*  END_COLLECTION                      */
+};
+
+/* Consumer Control descriptor (3) */
+static const char consumer_descriptor[] = {
+	0x05, 0x0C,		/* USAGE_PAGE (Consumer Devices)       */
+	0x09, 0x01,		/* USAGE (Consumer Control)            */
+	0xA1, 0x01,		/* COLLECTION (Application)            */
+	0x85, 0x03,		/* REPORT_ID = 3                       */
+	0x75, 0x10,		/* REPORT_SIZE (16)                    */
+	0x95, 0x02,		/* REPORT_COUNT (2)                    */
+	0x15, 0x01,		/* LOGICAL_MIN (1)                     */
+	0x26, 0x8C, 0x02,	/* LOGICAL_MAX (652)                   */
+	0x19, 0x01,		/* USAGE_MIN (1)                       */
+	0x2A, 0x8C, 0x02,	/* USAGE_MAX (652)                     */
+	0x81, 0x00,		/* INPUT (Data Ary Abs)                */
+	0xC0,			/* END_COLLECTION                      */
+};				/*                                     */
+
+/* System control descriptor (4) */
+static const char syscontrol_descriptor[] = {
+	0x05, 0x01,		/*   USAGE_PAGE (Generic Desktop)      */
+	0x09, 0x80,		/*   USAGE (System Control)            */
+	0xA1, 0x01,		/*   COLLECTION (Application)          */
+	0x85, 0x04,		/*   REPORT_ID = 4                     */
+	0x75, 0x02,		/*   REPORT_SIZE (2)                   */
+	0x95, 0x01,		/*   REPORT_COUNT (1)                  */
+	0x15, 0x01,		/*   LOGICAL_MIN (1)                   */
+	0x25, 0x03,		/*   LOGICAL_MAX (3)                   */
+	0x09, 0x82,		/*   USAGE (System Sleep)              */
+	0x09, 0x81,		/*   USAGE (System Power Down)         */
+	0x09, 0x83,		/*   USAGE (System Wake Up)            */
+	0x81, 0x60,		/*   INPUT (Data Ary Abs NPrf Null)    */
+	0x75, 0x06,		/*   REPORT_SIZE (6)                   */
+	0x81, 0x03,		/*   INPUT (Cnst Var Abs)              */
+	0xC0,			/*   END_COLLECTION                    */
+};
+
+/* Media descriptor (8) */
+static const char media_descriptor[] = {
+	0x06, 0xbc, 0xff,	/* Usage Page 0xffbc                   */
+	0x09, 0x88,		/* Usage 0x0088                        */
+	0xa1, 0x01,		/* BeginCollection                     */
+	0x85, 0x08,		/*   Report ID 8                       */
+	0x19, 0x01,		/*   Usage Min 0x0001                  */
+	0x29, 0xff,		/*   Usage Max 0x00ff                  */
+	0x15, 0x01,		/*   Logical Min 1                     */
+	0x26, 0xff, 0x00,	/*   Logical Max 255                   */
+	0x75, 0x08,		/*   Report Size 8                     */
+	0x95, 0x01,		/*   Report Count 1                    */
+	0x81, 0x00,		/*   Input                             */
+	0xc0,			/* EndCollection                       */
+};				/*                                     */
+
+/* Maximum size of all defined hid reports in bytes (including report id) */
+#define MAX_REPORT_SIZE 8
+
+/* Number of possible hid report types that can be created by this driver.
+ *
+ * Right now, RF report types have the same report types (or report id's)
+ * than the hid report created from those RF reports. In the future
+ * this doesnt have to be true.
+ *
+ * For instance, RF report type 0x01 which has a size of 8 bytes, corresponds
+ * to hid report id 0x01, this is standard keyboard. Same thing applies to mice
+ * reports and consumer control, etc. If a new RF report is created, it doesn't
+ * has to have the same report id as its corresponding hid report, so an
+ * translation may have to take place for future report types.
+ */
+#define NUMBER_OF_HID_REPORTS 32
+static const u8 hid_reportid_size_map[NUMBER_OF_HID_REPORTS] = {
+	[1] = 8,		/* Standard keyboard */
+	[2] = 8,		/* Standard mouse */
+	[3] = 5,		/* Consumer control */
+	[4] = 2,		/* System control */
+	[8] = 2,		/* Media Center */
+};
+
+
+#define LOGITECH_DJ_INTERFACE_NUMBER 0x02
+
+#define DJ_DEVICE_INDEX_MIN 1
+#define DJ_DEVICE_INDEX_MAX 6
+
+static struct hid_ll_driver logi_dj_ll_driver;
+
+static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
+					size_t count,
+					unsigned char report_type);
+
+static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev,
+						struct dj_report *dj_report)
+{
+	/* Called in delayed work context */
+	struct dj_device *dj_dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(&djrcv_dev->lock, flags);
+	dj_dev = djrcv_dev->paired_dj_devices[dj_report->device_index];
+	djrcv_dev->paired_dj_devices[dj_report->device_index] = NULL;
+	spin_unlock_irqrestore(&djrcv_dev->lock, flags);
+
+	if (dj_dev != NULL) {
+		hid_destroy_device(dj_dev->hdev);
+		kfree(dj_dev);
+	} else {
+		dev_err(&djrcv_dev->hdev->dev, "%s: can't destroy a NULL device\n",
+			__func__);
+	}
+}
+
+static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev,
+					  struct dj_report *dj_report)
+{
+	/* Called in delayed work context */
+	struct hid_device *djrcv_hdev = djrcv_dev->hdev;
+	struct usb_interface *intf = to_usb_interface(djrcv_hdev->dev.parent);
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct hid_device *dj_hiddev;
+	struct dj_device *dj_dev;
+
+	/* Device index goes from 1 to 6, we need 3 bytes to store the
+	 * semicolon, the index, and a null terminator
+	 */
+	unsigned char tmpstr[3];
+
+	if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] &
+	    SPFUNCTION_DEVICE_LIST_EMPTY) {
+		dbg_hid("%s: device list is empty\n", __func__);
+		return;
+	}
+
+	if ((dj_report->device_index < DJ_DEVICE_INDEX_MIN) ||
+	    (dj_report->device_index > DJ_DEVICE_INDEX_MAX)) {
+		dev_err(&djrcv_hdev->dev, "%s: invalid device index:%d\n",
+			__func__, dj_report->device_index);
+		return;
+	}
+
+	dj_hiddev = hid_allocate_device();
+	if (IS_ERR(dj_hiddev)) {
+		dev_err(&djrcv_hdev->dev, "%s: hid_allocate_device failed\n",
+			__func__);
+		return;
+	}
+
+	dj_hiddev->ll_driver = &logi_dj_ll_driver;
+	dj_hiddev->hid_output_raw_report = logi_dj_output_hidraw_report;
+
+	dj_hiddev->dev.parent = &djrcv_hdev->dev;
+	dj_hiddev->bus = BUS_USB;
+	dj_hiddev->vendor = le16_to_cpu(usbdev->descriptor.idVendor);
+	dj_hiddev->product = le16_to_cpu(usbdev->descriptor.idProduct);
+	snprintf(dj_hiddev->name, sizeof(dj_hiddev->name),
+		"Logitech Unifying Device. Wireless PID:%02x%02x",
+		dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_MSB],
+		dj_report->report_params[DEVICE_PAIRED_PARAM_EQUAD_ID_LSB]);
+
+	usb_make_path(usbdev, dj_hiddev->phys, sizeof(dj_hiddev->phys));
+	snprintf(tmpstr, sizeof(tmpstr), ":%d", dj_report->device_index);
+	strlcat(dj_hiddev->phys, tmpstr, sizeof(dj_hiddev->phys));
+
+	dj_dev = kzalloc(sizeof(struct dj_device), GFP_KERNEL);
+
+	if (!dj_dev) {
+		dev_err(&djrcv_hdev->dev, "%s: failed allocating dj_device\n",
+			__func__);
+		goto dj_device_allocate_fail;
+	}
+
+	dj_dev->reports_supported = le32_to_cpu(
+		dj_report->report_params[DEVICE_PAIRED_RF_REPORT_TYPE]);
+	dj_dev->hdev = dj_hiddev;
+	dj_dev->dj_receiver_dev = djrcv_dev;
+	dj_dev->device_index = dj_report->device_index;
+	dj_hiddev->driver_data = dj_dev;
+
+	djrcv_dev->paired_dj_devices[dj_report->device_index] = dj_dev;
+
+	if (hid_add_device(dj_hiddev)) {
+		dev_err(&djrcv_hdev->dev, "%s: failed adding dj_device\n",
+			__func__);
+		goto hid_add_device_fail;
+	}
+
+	return;
+
+hid_add_device_fail:
+	djrcv_dev->paired_dj_devices[dj_report->device_index] = NULL;
+	kfree(dj_dev);
+dj_device_allocate_fail:
+	hid_destroy_device(dj_hiddev);
+}
+
+static void delayedwork_callback(struct work_struct *work)
+{
+	struct dj_receiver_dev *djrcv_dev =
+		container_of(work, struct dj_receiver_dev, work);
+
+	struct dj_report dj_report;
+	unsigned long flags;
+	int count;
+
+	dbg_hid("%s\n", __func__);
+
+	spin_lock_irqsave(&djrcv_dev->lock, flags);
+
+	count = kfifo_out(&djrcv_dev->notif_fifo, &dj_report,
+				sizeof(struct dj_report));
+
+	if (count != sizeof(struct dj_report)) {
+		dev_err(&djrcv_dev->hdev->dev, "%s: workitem triggered without "
+			"notifications available\n", __func__);
+		spin_unlock_irqrestore(&djrcv_dev->lock, flags);
+		return;
+	}
+
+	if (!kfifo_is_empty(&djrcv_dev->notif_fifo)) {
+		if (schedule_work(&djrcv_dev->work) == 0) {
+			dbg_hid("%s: did not schedule the work item, was "
+				"already queued\n", __func__);
+		}
+	}
+
+	spin_unlock_irqrestore(&djrcv_dev->lock, flags);
+
+	switch (dj_report.report_type) {
+	case REPORT_TYPE_NOTIF_DEVICE_PAIRED:
+		logi_dj_recv_add_djhid_device(djrcv_dev, &dj_report);
+		break;
+	case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED:
+		logi_dj_recv_destroy_djhid_device(djrcv_dev, &dj_report);
+		break;
+	default:
+		dbg_hid("%s: unexpected report type\n", __func__);
+	}
+}
+
+static void logi_dj_recv_queue_notification(struct dj_receiver_dev *djrcv_dev,
+					   struct dj_report *dj_report)
+{
+	/* We are called from atomic context (tasklet && djrcv->lock held) */
+
+	kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report));
+
+	if (schedule_work(&djrcv_dev->work) == 0) {
+		dbg_hid("%s: did not schedule the work item, was already "
+			"queued\n", __func__);
+	}
+}
+
+static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev,
+					     struct dj_report *dj_report)
+{
+	/* We are called from atomic context (tasklet && djrcv->lock held) */
+	unsigned int i;
+	u8 reportbuffer[MAX_REPORT_SIZE];
+	struct dj_device *djdev;
+
+	djdev = djrcv_dev->paired_dj_devices[dj_report->device_index];
+
+	if (!djdev) {
+		dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]"
+			" is NULL, index %d\n", dj_report->device_index);
+		return;
+	}
+
+	memset(reportbuffer, 0, sizeof(reportbuffer));
+
+	for (i = 0; i < NUMBER_OF_HID_REPORTS; i++) {
+		if (djdev->reports_supported & (1 << i)) {
+			reportbuffer[0] = i;
+			if (hid_input_report(djdev->hdev,
+					     HID_INPUT_REPORT,
+					     reportbuffer,
+					     hid_reportid_size_map[i], 1)) {
+				dbg_hid("hid_input_report error sending null "
+					"report\n");
+			}
+		}
+	}
+}
+
+static void logi_dj_recv_forward_report(struct dj_receiver_dev *djrcv_dev,
+					struct dj_report *dj_report)
+{
+	/* We are called from atomic context (tasklet && djrcv->lock held) */
+	struct dj_device *dj_device;
+
+	dj_device = djrcv_dev->paired_dj_devices[dj_report->device_index];
+
+	if (dj_device == NULL) {
+		dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]"
+			" is NULL, index %d\n", dj_report->device_index);
+		return;
+	}
+
+	if ((dj_report->report_type > ARRAY_SIZE(hid_reportid_size_map) - 1) ||
+	    (hid_reportid_size_map[dj_report->report_type] == 0)) {
+		dbg_hid("invalid report type:%x\n", dj_report->report_type);
+		return;
+	}
+
+	if (hid_input_report(dj_device->hdev,
+			HID_INPUT_REPORT, &dj_report->report_type,
+			hid_reportid_size_map[dj_report->report_type], 1)) {
+		dbg_hid("hid_input_report error\n");
+	}
+}
+
+
+static int logi_dj_recv_send_report(struct dj_receiver_dev *djrcv_dev,
+				    struct dj_report *dj_report)
+{
+	struct hid_device *hdev = djrcv_dev->hdev;
+	int sent_bytes;
+
+	if (!hdev->hid_output_raw_report) {
+		dev_err(&hdev->dev, "%s:"
+			"hid_output_raw_report is null\n", __func__);
+		return -ENODEV;
+	}
+
+	sent_bytes = hdev->hid_output_raw_report(hdev, (u8 *) dj_report,
+						 sizeof(struct dj_report),
+						 HID_OUTPUT_REPORT);
+
+	return (sent_bytes < 0) ? sent_bytes : 0;
+}
+
+static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
+{
+	struct dj_report dj_report;
+
+	memset(&dj_report, 0, sizeof(dj_report));
+	dj_report.report_id = REPORT_ID_DJ_SHORT;
+	dj_report.device_index = 0xFF;
+	dj_report.report_type = REPORT_TYPE_CMD_GET_PAIRED_DEVICES;
+	return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+}
+
+static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
+					  unsigned timeout)
+{
+	struct dj_report dj_report;
+
+	memset(&dj_report, 0, sizeof(dj_report));
+	dj_report.report_id = REPORT_ID_DJ_SHORT;
+	dj_report.device_index = 0xFF;
+	dj_report.report_type = REPORT_TYPE_CMD_SWITCH;
+	dj_report.report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x1F;
+	dj_report.report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
+	return logi_dj_recv_send_report(djrcv_dev, &dj_report);
+}
+
+
+static int logi_dj_ll_open(struct hid_device *hid)
+{
+	dbg_hid("%s:%s\n", __func__, hid->phys);
+	return 0;
+
+}
+
+static void logi_dj_ll_close(struct hid_device *hid)
+{
+	dbg_hid("%s:%s\n", __func__, hid->phys);
+}
+
+static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
+					size_t count,
+					unsigned char report_type)
+{
+	/* Called by hid raw to send data */
+	dbg_hid("%s\n", __func__);
+
+	return 0;
+}
+
+static int logi_dj_ll_parse(struct hid_device *hid)
+{
+	struct dj_device *djdev = hid->driver_data;
+	int retval;
+
+	dbg_hid("%s\n", __func__);
+
+	djdev->hdev->version = 0x0111;
+	djdev->hdev->country = 0x00;
+
+	if (djdev->reports_supported & STD_KEYBOARD) {
+		dbg_hid("%s: sending a kbd descriptor, reports_supported: %x\n",
+			__func__, djdev->reports_supported);
+		retval = hid_parse_report(hid,
+					  (u8 *) kbd_descriptor,
+					  sizeof(kbd_descriptor));
+		if (retval) {
+			dbg_hid("%s: sending a kbd descriptor, hid_parse failed"
+				" error: %d\n", __func__, retval);
+			return retval;
+		}
+	}
+
+	if (djdev->reports_supported & STD_MOUSE) {
+		dbg_hid("%s: sending a mouse descriptor, reports_supported: "
+			"%x\n", __func__, djdev->reports_supported);
+		retval = hid_parse_report(hid,
+					  (u8 *) mse_descriptor,
+					  sizeof(mse_descriptor));
+		if (retval) {
+			dbg_hid("%s: sending a mouse descriptor, hid_parse "
+				"failed error: %d\n", __func__, retval);
+			return retval;
+		}
+	}
+
+	if (djdev->reports_supported & MULTIMEDIA) {
+		dbg_hid("%s: sending a multimedia report descriptor: %x\n",
+			__func__, djdev->reports_supported);
+		retval = hid_parse_report(hid,
+					  (u8 *) consumer_descriptor,
+					  sizeof(consumer_descriptor));
+		if (retval) {
+			dbg_hid("%s: sending a consumer_descriptor, hid_parse "
+				"failed error: %d\n", __func__, retval);
+			return retval;
+		}
+	}
+
+	if (djdev->reports_supported & POWER_KEYS) {
+		dbg_hid("%s: sending a power keys report descriptor: %x\n",
+			__func__, djdev->reports_supported);
+		retval = hid_parse_report(hid,
+					  (u8 *) syscontrol_descriptor,
+					  sizeof(syscontrol_descriptor));
+		if (retval) {
+			dbg_hid("%s: sending a syscontrol_descriptor, "
+				"hid_parse failed error: %d\n",
+				__func__, retval);
+			return retval;
+		}
+	}
+
+	if (djdev->reports_supported & MEDIA_CENTER) {
+		dbg_hid("%s: sending a media center report descriptor: %x\n",
+			__func__, djdev->reports_supported);
+		retval = hid_parse_report(hid,
+					  (u8 *) media_descriptor,
+					  sizeof(media_descriptor));
+		if (retval) {
+			dbg_hid("%s: sending a media_descriptor, hid_parse "
+				"failed error: %d\n", __func__, retval);
+			return retval;
+		}
+	}
+
+	if (djdev->reports_supported & KBD_LEDS) {
+		dbg_hid("%s: need to send kbd leds report descriptor: %x\n",
+			__func__, djdev->reports_supported);
+	}
+
+	return 0;
+}
+
+static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type,
+				  unsigned int code, int value)
+{
+	/* Sent by the input layer to handle leds and Force Feedback */
+	struct hid_device *dj_hiddev = input_get_drvdata(dev);
+	struct dj_device *dj_dev = dj_hiddev->driver_data;
+
+	struct dj_receiver_dev *djrcv_dev =
+	    dev_get_drvdata(dj_hiddev->dev.parent);
+	struct hid_device *dj_rcv_hiddev = djrcv_dev->hdev;
+	struct hid_report_enum *output_report_enum;
+
+	struct hid_field *field;
+	struct hid_report *report;
+	unsigned char data[8];
+	int offset;
+
+	dbg_hid("%s: %s, type:%d | code:%d | value:%d\n",
+		__func__, dev->phys, type, code, value);
+
+	if (type != EV_LED)
+		return -1;
+
+	offset = hidinput_find_field(dj_hiddev, type, code, &field);
+
+	if (offset == -1) {
+		dev_warn(&dev->dev, "event field not found\n");
+		return -1;
+	}
+	hid_set_field(field, offset, value);
+	hid_output_report(field->report, &data[0]);
+
+	output_report_enum = &dj_rcv_hiddev->report_enum[HID_OUTPUT_REPORT];
+	report = output_report_enum->report_id_hash[REPORT_ID_DJ_SHORT];
+	hid_set_field(report->field[0], 0, dj_dev->device_index);
+	hid_set_field(report->field[0], 1, REPORT_TYPE_LEDS);
+	hid_set_field(report->field[0], 2, data[1]);
+
+	usbhid_submit_report(dj_rcv_hiddev, report, USB_DIR_OUT);
+
+	return 0;
+
+}
+
+static int logi_dj_ll_start(struct hid_device *hid)
+{
+	dbg_hid("%s\n", __func__);
+	return 0;
+}
+
+static void logi_dj_ll_stop(struct hid_device *hid)
+{
+	dbg_hid("%s\n", __func__);
+}
+
+
+static struct hid_ll_driver logi_dj_ll_driver = {
+	.parse = logi_dj_ll_parse,
+	.start = logi_dj_ll_start,
+	.stop = logi_dj_ll_stop,
+	.open = logi_dj_ll_open,
+	.close = logi_dj_ll_close,
+	.hidinput_input_event = logi_dj_ll_input_event,
+};
+
+
+static int logi_dj_raw_event(struct hid_device *hdev,
+			     struct hid_report *report, u8 *data,
+			     int size)
+{
+	struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
+	struct dj_report *dj_report = (struct dj_report *) data;
+	unsigned long flags;
+	bool report_processed = false;
+
+	dbg_hid("%s, size:%d\n", __func__, size);
+
+	/* Here we receive all data coming from iface 2, there are 4 cases:
+	 *
+	 * 1) Data should continue its normal processing i.e. data does not
+	 * come from the DJ collection, in which case we do nothing and
+	 * return 0, so hid-core can continue normal processing (will forward
+	 * to associated hidraw device)
+	 *
+	 * 2) Data is from DJ collection, and is intended for this driver i. e.
+	 * data contains arrival, departure, etc notifications, in which case
+	 * we queue them for delayed processing by the work queue. We return 1
+	 * to hid-core as no further processing is required from it.
+	 *
+	 * 3) Data is from DJ collection, and informs a connection change,
+	 * if the change means rf link loss, then we must send a null report
+	 * to the upper layer to discard potentially pressed keys that may be
+	 * repeated forever by the input layer. Return 1 to hid-core as no
+	 * further processing is required.
+	 *
+	 * 4) Data is from DJ collection and is an actual input event from
+	 * a paired DJ device in which case we forward it to the correct hid
+	 * device (via hid_input_report() ) and return 1 so hid-core does not do
+	 * anything else with it.
+	 */
+
+	spin_lock_irqsave(&djrcv_dev->lock, flags);
+	if (dj_report->report_id == REPORT_ID_DJ_SHORT) {
+		switch (dj_report->report_type) {
+		case REPORT_TYPE_NOTIF_DEVICE_PAIRED:
+		case REPORT_TYPE_NOTIF_DEVICE_UNPAIRED:
+			logi_dj_recv_queue_notification(djrcv_dev, dj_report);
+			break;
+		case REPORT_TYPE_NOTIF_CONNECTION_STATUS:
+			if (dj_report->report_params[CONNECTION_STATUS_PARAM_STATUS] ==
+			    STATUS_LINKLOSS) {
+				logi_dj_recv_forward_null_report(djrcv_dev, dj_report);
+			}
+			break;
+		default:
+			logi_dj_recv_forward_report(djrcv_dev, dj_report);
+		}
+		report_processed = true;
+	}
+	spin_unlock_irqrestore(&djrcv_dev->lock, flags);
+
+	return report_processed;
+}
+
+static int logi_dj_probe(struct hid_device *hdev,
+			 const struct hid_device_id *id)
+{
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+	struct dj_receiver_dev *djrcv_dev;
+	int retval;
+
+	if (is_dj_device((struct dj_device *)hdev->driver_data))
+		return -ENODEV;
+
+	dbg_hid("%s called for ifnum %d\n", __func__,
+		intf->cur_altsetting->desc.bInterfaceNumber);
+
+	/* Ignore interfaces 0 and 1, they will not carry any data, dont create
+	 * any hid_device for them */
+	if (intf->cur_altsetting->desc.bInterfaceNumber !=
+	    LOGITECH_DJ_INTERFACE_NUMBER) {
+		dbg_hid("%s: ignoring ifnum %d\n", __func__,
+			intf->cur_altsetting->desc.bInterfaceNumber);
+		return -ENODEV;
+	}
+
+	/* Treat interface 2 */
+
+	djrcv_dev = kzalloc(sizeof(struct dj_receiver_dev), GFP_KERNEL);
+	if (!djrcv_dev) {
+		dev_err(&hdev->dev,
+			"%s:failed allocating dj_receiver_dev\n", __func__);
+		return -ENOMEM;
+	}
+	djrcv_dev->hdev = hdev;
+	INIT_WORK(&djrcv_dev->work, delayedwork_callback);
+	spin_lock_init(&djrcv_dev->lock);
+	if (kfifo_alloc(&djrcv_dev->notif_fifo,
+			DJ_MAX_NUMBER_NOTIFICATIONS * sizeof(struct dj_report),
+			GFP_KERNEL)) {
+		dev_err(&hdev->dev,
+			"%s:failed allocating notif_fifo\n", __func__);
+		kfree(djrcv_dev);
+		return -ENOMEM;
+	}
+	hid_set_drvdata(hdev, djrcv_dev);
+
+	/* Call  to usbhid to fetch the HID descriptors of interface 2 and
+	 * subsequently call to the hid/hid-core to parse the fetched
+	 * descriptors, this will in turn create the hidraw and hiddev nodes
+	 * for interface 2 of the receiver */
+	retval = hid_parse(hdev);
+	if (retval) {
+		dev_err(&hdev->dev,
+			"%s:parse of interface 2 failed\n", __func__);
+		goto hid_parse_fail;
+	}
+
+	/* Starts the usb device and connects to upper interfaces hiddev and
+	 * hidraw */
+	retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (retval) {
+		dev_err(&hdev->dev,
+			"%s:hid_hw_start returned error\n", __func__);
+		goto hid_hw_start_fail;
+	}
+
+	retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0);
+	if (retval < 0) {
+		dev_err(&hdev->dev,
+			"%s:logi_dj_recv_switch_to_dj_mode returned error:%d\n",
+			__func__, retval);
+		goto switch_to_dj_mode_fail;
+	}
+
+	/* This is enabling the polling urb on the IN endpoint */
+	retval = hdev->ll_driver->open(hdev);
+	if (retval < 0) {
+		dev_err(&hdev->dev, "%s:hdev->ll_driver->open returned "
+			"error:%d\n", __func__, retval);
+		goto llopen_failed;
+	}
+
+	retval = logi_dj_recv_query_paired_devices(djrcv_dev);
+	if (retval < 0) {
+		dev_err(&hdev->dev, "%s:logi_dj_recv_query_paired_devices "
+			"error:%d\n", __func__, retval);
+		goto logi_dj_recv_query_paired_devices_failed;
+	}
+
+	return retval;
+
+logi_dj_recv_query_paired_devices_failed:
+	hdev->ll_driver->close(hdev);
+
+llopen_failed:
+switch_to_dj_mode_fail:
+	hid_hw_stop(hdev);
+
+hid_hw_start_fail:
+hid_parse_fail:
+	kfifo_free(&djrcv_dev->notif_fifo);
+	kfree(djrcv_dev);
+	hid_set_drvdata(hdev, NULL);
+	return retval;
+
+}
+
+#ifdef CONFIG_PM
+static int logi_dj_reset_resume(struct hid_device *hdev)
+{
+	int retval;
+	struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
+
+	retval = logi_dj_recv_switch_to_dj_mode(djrcv_dev, 0);
+	if (retval < 0) {
+		dev_err(&hdev->dev,
+			"%s:logi_dj_recv_switch_to_dj_mode returned error:%d\n",
+			__func__, retval);
+	}
+
+	return 0;
+}
+#endif
+
+static void logi_dj_remove(struct hid_device *hdev)
+{
+	struct dj_receiver_dev *djrcv_dev = hid_get_drvdata(hdev);
+	struct dj_device *dj_dev;
+	int i;
+
+	dbg_hid("%s\n", __func__);
+
+	cancel_work_sync(&djrcv_dev->work);
+
+	hdev->ll_driver->close(hdev);
+	hid_hw_stop(hdev);
+
+	/* I suppose that at this point the only context that can access
+	 * the djrecv_data is this thread as the work item is guaranteed to
+	 * have finished and no more raw_event callbacks should arrive after
+	 * the remove callback was triggered so no locks are put around the
+	 * code below */
+	for (i = 0; i < DJ_MAX_PAIRED_DEVICES; i++) {
+		dj_dev = djrcv_dev->paired_dj_devices[i];
+		if (dj_dev != NULL) {
+			hid_destroy_device(dj_dev->hdev);
+			kfree(dj_dev);
+			djrcv_dev->paired_dj_devices[i] = NULL;
+		}
+	}
+
+	kfifo_free(&djrcv_dev->notif_fifo);
+	kfree(djrcv_dev);
+	hid_set_drvdata(hdev, NULL);
+}
+
+static int logi_djdevice_probe(struct hid_device *hdev,
+			 const struct hid_device_id *id)
+{
+	int ret;
+	struct dj_device *dj_dev = hdev->driver_data;
+
+	if (!is_dj_device(dj_dev))
+		return -ENODEV;
+
+	ret = hid_parse(hdev);
+	if (!ret)
+		ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+
+	return ret;
+}
+
+static const struct hid_device_id logi_dj_receivers[] = {
+	{HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER)},
+	{HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(hid, logi_dj_receivers);
+
+static struct hid_driver logi_djreceiver_driver = {
+	.name = "logitech-djreceiver",
+	.id_table = logi_dj_receivers,
+	.probe = logi_dj_probe,
+	.remove = logi_dj_remove,
+	.raw_event = logi_dj_raw_event,
+#ifdef CONFIG_PM
+	.reset_resume = logi_dj_reset_resume,
+#endif
+};
+
+
+static const struct hid_device_id logi_dj_devices[] = {
+	{HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER)},
+	{HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2)},
+	{}
+};
+
+static struct hid_driver logi_djdevice_driver = {
+	.name = "logitech-djdevice",
+	.id_table = logi_dj_devices,
+	.probe = logi_djdevice_probe,
+};
+
+
+static int __init logi_dj_init(void)
+{
+	int retval;
+
+	dbg_hid("Logitech-DJ:%s\n", __func__);
+
+	retval = hid_register_driver(&logi_djreceiver_driver);
+	if (retval)
+		return retval;
+
+	retval = hid_register_driver(&logi_djdevice_driver);
+	if (retval)
+		hid_unregister_driver(&logi_djreceiver_driver);
+
+	return retval;
+
+}
+
+static void __exit logi_dj_exit(void)
+{
+	dbg_hid("Logitech-DJ:%s\n", __func__);
+
+	hid_unregister_driver(&logi_djdevice_driver);
+	hid_unregister_driver(&logi_djreceiver_driver);
+
+}
+
+module_init(logi_dj_init);
+module_exit(logi_dj_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Logitech");
+MODULE_AUTHOR("Nestor Lopez Casado");
+MODULE_AUTHOR("nlopezcasad@logitech.com");
diff --git a/drivers/hid/hid-logitech-dj.h b/drivers/hid/hid-logitech-dj.h
new file mode 100644
index 0000000..5982263
--- /dev/null
+++ b/drivers/hid/hid-logitech-dj.h
@@ -0,0 +1,120 @@
+#ifndef __HID_LOGITECH_DJ_H
+#define __HID_LOGITECH_DJ_H
+
+/*
+ *  HID driver for Logitech Unifying receivers
+ *
+ *  Copyright (c) 2011 Logitech
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kfifo.h>
+
+#define DJ_MAX_PAIRED_DEVICES			6
+#define DJ_MAX_NUMBER_NOTIFICATIONS		8
+
+#define DJREPORT_SHORT_LENGTH			15
+#define DJREPORT_LONG_LENGTH			32
+
+#define REPORT_ID_DJ_SHORT			0x20
+#define REPORT_ID_DJ_LONG			0x21
+
+#define REPORT_TYPE_RFREPORT_FIRST		0x01
+#define REPORT_TYPE_RFREPORT_LAST		0x1F
+
+/* Command Switch to DJ mode */
+#define REPORT_TYPE_CMD_SWITCH			0x80
+#define CMD_SWITCH_PARAM_DEVBITFIELD		0x00
+#define CMD_SWITCH_PARAM_TIMEOUT_SECONDS	0x01
+#define TIMEOUT_NO_KEEPALIVE			0x00
+
+/* Command to Get the list of Paired devices */
+#define REPORT_TYPE_CMD_GET_PAIRED_DEVICES	0x81
+
+/* Device Paired Notification */
+#define REPORT_TYPE_NOTIF_DEVICE_PAIRED		0x41
+#define SPFUNCTION_MORE_NOTIF_EXPECTED		0x01
+#define SPFUNCTION_DEVICE_LIST_EMPTY		0x02
+#define DEVICE_PAIRED_PARAM_SPFUNCTION		0x00
+#define DEVICE_PAIRED_PARAM_EQUAD_ID_LSB	0x01
+#define DEVICE_PAIRED_PARAM_EQUAD_ID_MSB	0x02
+#define DEVICE_PAIRED_RF_REPORT_TYPE		0x03
+
+/* Device Un-Paired Notification */
+#define REPORT_TYPE_NOTIF_DEVICE_UNPAIRED	0x40
+
+
+/* Connection Status Notification */
+#define REPORT_TYPE_NOTIF_CONNECTION_STATUS	0x42
+#define CONNECTION_STATUS_PARAM_STATUS		0x00
+#define STATUS_LINKLOSS				0x01
+
+/* Error Notification */
+#define REPORT_TYPE_NOTIF_ERROR			0x7F
+#define NOTIF_ERROR_PARAM_ETYPE			0x00
+#define ETYPE_KEEPALIVE_TIMEOUT			0x01
+
+/* supported DJ HID && RF report types */
+#define REPORT_TYPE_KEYBOARD			0x01
+#define REPORT_TYPE_MOUSE			0x02
+#define REPORT_TYPE_CONSUMER_CONTROL		0x03
+#define REPORT_TYPE_SYSTEM_CONTROL		0x04
+#define REPORT_TYPE_MEDIA_CENTER		0x08
+#define REPORT_TYPE_LEDS			0x0E
+
+/* RF Report types bitfield */
+#define STD_KEYBOARD				0x00000002
+#define STD_MOUSE				0x00000004
+#define MULTIMEDIA				0x00000008
+#define POWER_KEYS				0x00000010
+#define MEDIA_CENTER				0x00000100
+#define KBD_LEDS				0x00004000
+
+struct dj_report {
+	u8 report_id;
+	u8 device_index;
+	u8 report_type;
+	u8 report_params[DJREPORT_SHORT_LENGTH - 3];
+};
+
+struct dj_receiver_dev {
+	struct hid_device *hdev;
+	struct dj_device *paired_dj_devices[DJ_MAX_PAIRED_DEVICES];
+	struct work_struct work;
+	struct kfifo notif_fifo;
+	spinlock_t lock;
+};
+
+struct dj_device {
+	struct hid_device *hdev;
+	struct dj_receiver_dev *dj_receiver_dev;
+	u32 reports_supported;
+	u8 device_index;
+};
+
+/**
+ * is_dj_device - know if the given dj_device is not the receiver.
+ * @dj_dev: the dj device to test
+ *
+ * This macro tests if a struct dj_device pointer is a device created
+ * by the bus enumarator.
+ */
+#define is_dj_device(dj_dev) \
+	(&(dj_dev)->dj_receiver_dev->hdev->dev == (dj_dev)->hdev->dev.parent)
+
+#endif