[POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads
Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the
current kernel. Current patch fixes it, as well as other inconsistencies
expressed, that do not permit targets from working properly:
- Updated dts with a chosen node with interrupt controller,
- fixed messed device IDs among CPM2 SoC devices,
- corrected odd header name and fixed type in defines,
- Added 82xx subdir to the powerpc/platforms Makefile, missed during
initial commit,
- new solely-powerpc header file for 8260 family (was using one from
arch/ppc, this one cleaned up from the extra stuff), in fact for now
a placeholder to get the board-specific includes for stuff not yet
capable to live with devicetree peeks only
- Fixed couple of misprints in reference mpc8272 dts.
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 286638e..26b44f7 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -65,8 +65,8 @@
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
- ranges = < 0 0 2 00000000 f0000000 00053000>;
- reg = <f0000000 0>;
+ ranges = <00000000 f0000000 00053000>;
+ reg = <f0000000 10000>;
mdio@0 {
device_type = "mdio";
@@ -130,8 +130,8 @@
#interrupt-cells = <2>;
device_type = "cpm";
model = "CPM2";
- ranges = <00000000 00000000 3ffff>;
- reg = <10d80 3280>;
+ ranges = <00000000 00000000 20000>;
+ reg = <0 20000>;
command-proc = <119c0>;
brg-frequency = <17D7840>;
cpm_clk = <BEBC200>;
diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c
index 0f5b30d..74e7892 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx.c
@@ -50,7 +50,7 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/cpm2_pic.h>
-#include "pq2ads_pd.h"
+#include "pq2ads.h"
static int __init get_freq(char *name, unsigned long *val)
{
diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
index ea880f1..7334c1a 100644
--- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c
@@ -51,7 +51,7 @@
#include <sysdev/fsl_soc.h>
#include <../sysdev/cpm2_pic.h>
-#include "pq2ads_pd.h"
+#include "pq2ads.h"
#ifdef CONFIG_PCI
static uint pci_clk_frq;
diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h
index fb2f92b..5b5cca6 100644
--- a/arch/powerpc/platforms/82xx/pq2ads.h
+++ b/arch/powerpc/platforms/82xx/pq2ads.h
@@ -22,6 +22,7 @@
#ifndef __MACH_ADS8260_DEFS
#define __MACH_ADS8260_DEFS
+#include <linux/seq_file.h>
#include <asm/ppcboot.h>
/* For our show_cpuinfo hooks. */
@@ -46,12 +47,12 @@
#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 ==enable */
#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 ==enable */
#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/
-#define BCSR3_FETH2_RS ((uint)0x80000000) /* 0 == reset */
+#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */
/* cpm serial driver works with constants below */
#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
-#define SIU_INT_SMC2i ((uint)0x05+CPM_IRQ_OFFSET)
+#define SIU_INT_SMC2 ((uint)0x05+CPM_IRQ_OFFSET)
#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 7f03ea9..f164005 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_PPC_CHRP) += chrp/
obj-$(CONFIG_4xx) += 4xx/
obj-$(CONFIG_PPC_8xx) += 8xx/
+obj-$(CONFIG_PPC_82xx) += 82xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
obj-$(CONFIG_PPC_85xx) += 85xx/
obj-$(CONFIG_PPC_86xx) += 86xx/