ASoC: msm: Add the support for 16kHz AUX PCM
There are use cases that 16kHz sample rate AUX PCM needed
besides 8kHz. Add the support so that the corresponding
sample rate dependent platform data is used to configure
the AUX PCM port.
Change-Id: I58715238cacdeea5e59b5e1693a34f005f289e0f
Signed-off-by: Kuirong Wang <kuirongw@codeaurora.org>
diff --git a/arch/arm/mach-msm/devices-8064.c b/arch/arm/mach-msm/devices-8064.c
index 29a90e4..424edce 100644
--- a/arch/arm/mach-msm/devices-8064.c
+++ b/arch/arm/mach-msm/devices-8064.c
@@ -477,13 +477,24 @@
*/
struct msm_dai_auxpcm_pdata apq_auxpcm_pdata = {
.clk = "pcm_clk",
- .mode = AFE_PCM_CFG_MODE_PCM,
- .sync = AFE_PCM_CFG_SYNC_INT,
- .frame = AFE_PCM_CFG_FRM_256BPF,
- .quant = AFE_PCM_CFG_QUANT_LINEAR_NOPAD,
- .slot = 0,
- .data = AFE_PCM_CFG_CDATAOE_MASTER,
- .pcm_clk_rate = 2048000,
+ .mode_8k = {
+ .mode = AFE_PCM_CFG_MODE_PCM,
+ .sync = AFE_PCM_CFG_SYNC_INT,
+ .frame = AFE_PCM_CFG_FRM_256BPF,
+ .quant = AFE_PCM_CFG_QUANT_LINEAR_NOPAD,
+ .slot = 0,
+ .data = AFE_PCM_CFG_CDATAOE_MASTER,
+ .pcm_clk_rate = 2048000,
+ },
+ .mode_16k = {
+ .mode = AFE_PCM_CFG_MODE_PCM,
+ .sync = AFE_PCM_CFG_SYNC_INT,
+ .frame = AFE_PCM_CFG_FRM_256BPF,
+ .quant = AFE_PCM_CFG_QUANT_LINEAR_NOPAD,
+ .slot = 0,
+ .data = AFE_PCM_CFG_CDATAOE_MASTER,
+ .pcm_clk_rate = 4096000,
+ }
};
struct platform_device apq_cpudai_auxpcm_rx = {
diff --git a/arch/arm/mach-msm/devices-8960.c b/arch/arm/mach-msm/devices-8960.c
index f1553b6..e474e36 100644
--- a/arch/arm/mach-msm/devices-8960.c
+++ b/arch/arm/mach-msm/devices-8960.c
@@ -1892,13 +1892,24 @@
*/
struct msm_dai_auxpcm_pdata auxpcm_pdata = {
.clk = "pcm_clk",
- .mode = AFE_PCM_CFG_MODE_PCM,
- .sync = AFE_PCM_CFG_SYNC_INT,
- .frame = AFE_PCM_CFG_FRM_256BPF,
- .quant = AFE_PCM_CFG_QUANT_LINEAR_NOPAD,
- .slot = 0,
- .data = AFE_PCM_CFG_CDATAOE_MASTER,
- .pcm_clk_rate = 2048000,
+ .mode_8k = {
+ .mode = AFE_PCM_CFG_MODE_PCM,
+ .sync = AFE_PCM_CFG_SYNC_INT,
+ .frame = AFE_PCM_CFG_FRM_256BPF,
+ .quant = AFE_PCM_CFG_QUANT_LINEAR_NOPAD,
+ .slot = 0,
+ .data = AFE_PCM_CFG_CDATAOE_MASTER,
+ .pcm_clk_rate = 2048000,
+ },
+ .mode_16k = {
+ .mode = AFE_PCM_CFG_MODE_PCM,
+ .sync = AFE_PCM_CFG_SYNC_INT,
+ .frame = AFE_PCM_CFG_FRM_256BPF,
+ .quant = AFE_PCM_CFG_QUANT_LINEAR_NOPAD,
+ .slot = 0,
+ .data = AFE_PCM_CFG_CDATAOE_MASTER,
+ .pcm_clk_rate = 4096000,
+ }
};
struct platform_device msm_cpudai_auxpcm_rx = {
diff --git a/arch/arm/mach-msm/devices-9615.c b/arch/arm/mach-msm/devices-9615.c
index 8eb1580..3629490 100644
--- a/arch/arm/mach-msm/devices-9615.c
+++ b/arch/arm/mach-msm/devices-9615.c
@@ -448,13 +448,24 @@
*/
struct msm_dai_auxpcm_pdata auxpcm_pdata = {
.clk = "pcm_clk",
- .mode = AFE_PCM_CFG_MODE_PCM,
- .sync = AFE_PCM_CFG_SYNC_INT,
- .frame = AFE_PCM_CFG_FRM_256BPF,
- .quant = AFE_PCM_CFG_QUANT_LINEAR_NOPAD,
- .slot = 0,
- .data = AFE_PCM_CFG_CDATAOE_MASTER,
- .pcm_clk_rate = 2048000,
+ .mode_8k = {
+ .mode = AFE_PCM_CFG_MODE_PCM,
+ .sync = AFE_PCM_CFG_SYNC_INT,
+ .frame = AFE_PCM_CFG_FRM_256BPF,
+ .quant = AFE_PCM_CFG_QUANT_LINEAR_NOPAD,
+ .slot = 0,
+ .data = AFE_PCM_CFG_CDATAOE_MASTER,
+ .pcm_clk_rate = 2048000,
+ },
+ .mode_16k = {
+ .mode = AFE_PCM_CFG_MODE_PCM,
+ .sync = AFE_PCM_CFG_SYNC_INT,
+ .frame = AFE_PCM_CFG_FRM_256BPF,
+ .quant = AFE_PCM_CFG_QUANT_LINEAR_NOPAD,
+ .slot = 0,
+ .data = AFE_PCM_CFG_CDATAOE_MASTER,
+ .pcm_clk_rate = 4096000,
+ }
};
struct platform_device msm_cpudai_auxpcm_rx = {