| /* |
| * Copyright (c) 2011-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/err.h> |
| #include <linux/msm_ssbi.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/pm8xxx/pm8018.h> |
| #include <linux/mfd/pm8xxx/core.h> |
| #include <linux/mfd/pm8xxx/regulator.h> |
| #include <linux/leds-pm8xxx.h> |
| |
| |
| /* PMIC PM8018 SSBI Addresses */ |
| #define REG_HWREV 0x002 /* PMIC4 revision */ |
| #define REG_HWREV_2 0x0E8 /* PMIC4 revision 2 */ |
| |
| #define REG_MPP_BASE 0x050 |
| #define REG_IRQ_BASE 0x1BB |
| |
| #define REG_RTC_BASE 0x11D |
| |
| #define REG_TEMP_ALARM_CTRL 0x01B |
| #define REG_TEMP_ALARM_PWM 0x09B |
| |
| |
| #define PM8018_VERSION_MASK 0xFFF0 |
| #define PM8018_VERSION_VALUE 0x08F0 |
| #define PM8018_REVISION_MASK 0x000F |
| |
| #define REG_PM8018_PON_CNTRL_3 0x01D |
| |
| #define SINGLE_IRQ_RESOURCE(_name, _irq) \ |
| { \ |
| .name = _name, \ |
| .start = _irq, \ |
| .end = _irq, \ |
| .flags = IORESOURCE_IRQ, \ |
| } |
| |
| struct pm8018 { |
| struct device *dev; |
| struct pm_irq_chip *irq_chip; |
| struct mfd_cell *mfd_regulators; |
| struct pm8xxx_regulator_core_platform_data *regulator_cdata; |
| u32 rev_registers; |
| u8 restart_reason; |
| }; |
| |
| static int pm8018_readb(const struct device *dev, u16 addr, u8 *val) |
| { |
| const struct pm8xxx_drvdata *pm8018_drvdata = dev_get_drvdata(dev); |
| const struct pm8018 *pmic = pm8018_drvdata->pm_chip_data; |
| |
| return msm_ssbi_read(pmic->dev->parent, addr, val, 1); |
| } |
| |
| static int pm8018_writeb(const struct device *dev, u16 addr, u8 val) |
| { |
| const struct pm8xxx_drvdata *pm8018_drvdata = dev_get_drvdata(dev); |
| const struct pm8018 *pmic = pm8018_drvdata->pm_chip_data; |
| |
| return msm_ssbi_write(pmic->dev->parent, addr, &val, 1); |
| } |
| |
| static int pm8018_read_buf(const struct device *dev, u16 addr, u8 *buf, |
| int cnt) |
| { |
| const struct pm8xxx_drvdata *pm8018_drvdata = dev_get_drvdata(dev); |
| const struct pm8018 *pmic = pm8018_drvdata->pm_chip_data; |
| |
| return msm_ssbi_read(pmic->dev->parent, addr, buf, cnt); |
| } |
| |
| static int pm8018_write_buf(const struct device *dev, u16 addr, u8 *buf, |
| int cnt) |
| { |
| const struct pm8xxx_drvdata *pm8018_drvdata = dev_get_drvdata(dev); |
| const struct pm8018 *pmic = pm8018_drvdata->pm_chip_data; |
| |
| return msm_ssbi_write(pmic->dev->parent, addr, buf, cnt); |
| } |
| |
| static int pm8018_read_irq_stat(const struct device *dev, int irq) |
| { |
| const struct pm8xxx_drvdata *pm8018_drvdata = dev_get_drvdata(dev); |
| const struct pm8018 *pmic = pm8018_drvdata->pm_chip_data; |
| |
| return pm8xxx_get_irq_stat(pmic->irq_chip, irq); |
| } |
| |
| static enum pm8xxx_version pm8018_get_version(const struct device *dev) |
| { |
| const struct pm8xxx_drvdata *pm8018_drvdata = dev_get_drvdata(dev); |
| const struct pm8018 *pmic = pm8018_drvdata->pm_chip_data; |
| enum pm8xxx_version version = -ENODEV; |
| |
| if ((pmic->rev_registers & PM8018_VERSION_MASK) == PM8018_VERSION_VALUE) |
| version = PM8XXX_VERSION_8018; |
| |
| return version; |
| } |
| |
| static int pm8018_get_revision(const struct device *dev) |
| { |
| const struct pm8xxx_drvdata *pm8018_drvdata = dev_get_drvdata(dev); |
| const struct pm8018 *pmic = pm8018_drvdata->pm_chip_data; |
| |
| return pmic->rev_registers & PM8018_REVISION_MASK; |
| } |
| |
| static u8 pm8018_restart_reason(const struct device *dev) |
| { |
| const struct pm8xxx_drvdata *pm8018_drvdata = dev_get_drvdata(dev); |
| const struct pm8018 *pmic = pm8018_drvdata->pm_chip_data; |
| |
| return pmic->restart_reason; |
| } |
| |
| static struct pm8xxx_drvdata pm8018_drvdata = { |
| .pmic_readb = pm8018_readb, |
| .pmic_writeb = pm8018_writeb, |
| .pmic_read_buf = pm8018_read_buf, |
| .pmic_write_buf = pm8018_write_buf, |
| .pmic_read_irq_stat = pm8018_read_irq_stat, |
| .pmic_get_version = pm8018_get_version, |
| .pmic_get_revision = pm8018_get_revision, |
| .pmic_restart_reason = pm8018_restart_reason, |
| }; |
| |
| static const struct resource gpio_cell_resources[] __devinitconst = { |
| [0] = { |
| .start = PM8018_IRQ_BLOCK_BIT(PM8018_GPIO_BLOCK_START, 0), |
| .end = PM8018_IRQ_BLOCK_BIT(PM8018_GPIO_BLOCK_START, 0) |
| + PM8018_NR_GPIOS - 1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct mfd_cell gpio_cell __devinitdata = { |
| .name = PM8XXX_GPIO_DEV_NAME, |
| .id = -1, |
| .resources = gpio_cell_resources, |
| .num_resources = ARRAY_SIZE(gpio_cell_resources), |
| }; |
| |
| static const struct resource adc_cell_resources[] __devinitconst = { |
| SINGLE_IRQ_RESOURCE(NULL, PM8018_ADC_EOC_USR_IRQ), |
| SINGLE_IRQ_RESOURCE(NULL, PM8018_ADC_BATT_TEMP_WARM_IRQ), |
| SINGLE_IRQ_RESOURCE(NULL, PM8018_ADC_BATT_TEMP_COLD_IRQ), |
| }; |
| |
| static struct mfd_cell adc_cell __devinitdata = { |
| .name = PM8XXX_ADC_DEV_NAME, |
| .id = -1, |
| .resources = adc_cell_resources, |
| .num_resources = ARRAY_SIZE(adc_cell_resources), |
| }; |
| |
| static const struct resource mpp_cell_resources[] __devinitconst = { |
| { |
| .start = PM8018_IRQ_BLOCK_BIT(PM8018_MPP_BLOCK_START, 0), |
| .end = PM8018_IRQ_BLOCK_BIT(PM8018_MPP_BLOCK_START, 0) |
| + PM8018_NR_MPPS - 1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct mfd_cell mpp_cell __devinitdata = { |
| .name = PM8XXX_MPP_DEV_NAME, |
| .id = -1, |
| .resources = mpp_cell_resources, |
| .num_resources = ARRAY_SIZE(mpp_cell_resources), |
| }; |
| |
| static const struct resource rtc_cell_resources[] __devinitconst = { |
| [0] = SINGLE_IRQ_RESOURCE(NULL, PM8018_RTC_ALARM_IRQ), |
| [1] = { |
| .name = "pmic_rtc_base", |
| .start = REG_RTC_BASE, |
| .end = REG_RTC_BASE, |
| .flags = IORESOURCE_IO, |
| }, |
| }; |
| |
| static struct mfd_cell rtc_cell __devinitdata = { |
| .name = PM8XXX_RTC_DEV_NAME, |
| .id = -1, |
| .resources = rtc_cell_resources, |
| .num_resources = ARRAY_SIZE(rtc_cell_resources), |
| }; |
| |
| static const struct resource resources_pwrkey[] __devinitconst = { |
| SINGLE_IRQ_RESOURCE(NULL, PM8018_PWRKEY_REL_IRQ), |
| SINGLE_IRQ_RESOURCE(NULL, PM8018_PWRKEY_PRESS_IRQ), |
| }; |
| |
| static struct mfd_cell pwrkey_cell __devinitdata = { |
| .name = PM8XXX_PWRKEY_DEV_NAME, |
| .id = -1, |
| .num_resources = ARRAY_SIZE(resources_pwrkey), |
| .resources = resources_pwrkey, |
| }; |
| |
| static struct mfd_cell misc_cell __devinitdata = { |
| .name = PM8XXX_MISC_DEV_NAME, |
| .id = -1, |
| }; |
| |
| static struct mfd_cell debugfs_cell __devinitdata = { |
| .name = "pm8xxx-debug", |
| .id = -1, |
| .platform_data = "pm8018-dbg", |
| .pdata_size = sizeof("pm8018-dbg"), |
| }; |
| |
| static struct mfd_cell pwm_cell __devinitdata = { |
| .name = PM8XXX_PWM_DEV_NAME, |
| .id = -1, |
| }; |
| |
| static struct mfd_cell leds_cell __devinitdata = { |
| .name = PM8XXX_LEDS_DEV_NAME, |
| .id = -1, |
| }; |
| |
| static const struct resource thermal_alarm_cell_resources[] __devinitconst = { |
| SINGLE_IRQ_RESOURCE("pm8018_tempstat_irq", PM8018_TEMPSTAT_IRQ), |
| SINGLE_IRQ_RESOURCE("pm8018_overtemp_irq", PM8018_OVERTEMP_IRQ), |
| }; |
| |
| static struct pm8xxx_tm_core_data thermal_alarm_cdata = { |
| .adc_channel = CHANNEL_DIE_TEMP, |
| .adc_type = PM8XXX_TM_ADC_PM8XXX_ADC, |
| .reg_addr_temp_alarm_ctrl = REG_TEMP_ALARM_CTRL, |
| .reg_addr_temp_alarm_pwm = REG_TEMP_ALARM_PWM, |
| .tm_name = "pm8018_tz", |
| .irq_name_temp_stat = "pm8018_tempstat_irq", |
| .irq_name_over_temp = "pm8018_overtemp_irq", |
| }; |
| |
| static struct mfd_cell thermal_alarm_cell __devinitdata = { |
| .name = PM8XXX_TM_DEV_NAME, |
| .id = -1, |
| .resources = thermal_alarm_cell_resources, |
| .num_resources = ARRAY_SIZE(thermal_alarm_cell_resources), |
| .platform_data = &thermal_alarm_cdata, |
| .pdata_size = sizeof(struct pm8xxx_tm_core_data), |
| }; |
| |
| static struct pm8xxx_vreg regulator_data[] = { |
| /* name pc_name ctrl test hpm_min */ |
| PLDO("8018_l2", "8018_l2_pc", 0x0B0, 0x0B1, LDO_50), |
| PLDO("8018_l3", "8018_l3_pc", 0x0B2, 0x0B3, LDO_50), |
| PLDO("8018_l4", "8018_l4_pc", 0x0B4, 0x0B5, LDO_300), |
| PLDO("8018_l5", "8018_l5_pc", 0x0B6, 0x0B7, LDO_150), |
| PLDO("8018_l6", "8018_l6_pc", 0x0B8, 0x0B9, LDO_150), |
| PLDO("8018_l7", "8018_l7_pc", 0x0BA, 0x0BB, LDO_300), |
| NLDO("8018_l8", "8018_l8_pc", 0x0BC, 0x0BD, LDO_150), |
| NLDO1200("8018_l9", 0x0BE, 0x0BF, LDO_1200), |
| NLDO1200("8018_l10", 0x0C0, 0x0C1, LDO_1200), |
| NLDO1200("8018_l11", 0x0C2, 0x0C3, LDO_1200), |
| NLDO1200("8018_l12", 0x0C4, 0x0C5, LDO_1200), |
| PLDO("8018_l13", "8018_l13_pc", 0x0C8, 0x0C9, LDO_50), |
| PLDO("8018_l14", "8018_l14_pc", 0x0CA, 0x0CB, LDO_50), |
| |
| /* name pc_name ctrl test2 clk sleep hpm_min */ |
| SMPS("8018_s1", "8018_s1_pc", 0x1D0, 0x1D5, 0x009, 0x1D2, SMPS_1500), |
| SMPS("8018_s2", "8018_s2_pc", 0x1D8, 0x1DD, 0x00A, 0x1DA, SMPS_1500), |
| SMPS("8018_s3", "8018_s3_pc", 0x1E0, 0x1E5, 0x00B, 0x1E2, SMPS_1500), |
| SMPS("8018_s4", "8018_s4_pc", 0x1E8, 0x1ED, 0x00C, 0x1EA, SMPS_1500), |
| SMPS("8018_s5", "8018_s5_pc", 0x1F0, 0x1F5, 0x00D, 0x1F2, SMPS_1500), |
| |
| /* name pc_name ctrl test */ |
| VS("8018_lvs1", "8018_lvs1_pc", 0x060, 0x061), |
| }; |
| |
| #define MAX_NAME_COMPARISON_LEN 32 |
| |
| static int __devinit match_regulator( |
| struct pm8xxx_regulator_core_platform_data *core_data, const char *name) |
| { |
| int found = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(regulator_data); i++) { |
| if (regulator_data[i].rdesc.name |
| && strncmp(regulator_data[i].rdesc.name, name, |
| MAX_NAME_COMPARISON_LEN) == 0) { |
| core_data->is_pin_controlled = false; |
| core_data->vreg = ®ulator_data[i]; |
| found = 1; |
| break; |
| } else if (regulator_data[i].rdesc_pc.name |
| && strncmp(regulator_data[i].rdesc_pc.name, name, |
| MAX_NAME_COMPARISON_LEN) == 0) { |
| core_data->is_pin_controlled = true; |
| core_data->vreg = ®ulator_data[i]; |
| found = 1; |
| break; |
| } |
| } |
| |
| if (!found) |
| pr_err("could not find a match for regulator: %s\n", name); |
| |
| return found; |
| } |
| |
| static int __devinit |
| pm8018_add_regulators(const struct pm8018_platform_data *pdata, |
| struct pm8018 *pmic, int irq_base) |
| { |
| int ret = 0; |
| struct mfd_cell *mfd_regulators; |
| struct pm8xxx_regulator_core_platform_data *cdata; |
| int i; |
| |
| /* Add one device for each regulator used by the board. */ |
| mfd_regulators = kzalloc(sizeof(struct mfd_cell) |
| * (pdata->num_regulators), GFP_KERNEL); |
| if (!mfd_regulators) { |
| pr_err("Cannot allocate %d bytes for pm8018 regulator " |
| "mfd cells\n", sizeof(struct mfd_cell) |
| * (pdata->num_regulators)); |
| return -ENOMEM; |
| } |
| cdata = kzalloc(sizeof(struct pm8xxx_regulator_core_platform_data) |
| * pdata->num_regulators, GFP_KERNEL); |
| if (!cdata) { |
| pr_err("Cannot allocate %d bytes for pm8018 regulator " |
| "core data\n", pdata->num_regulators |
| * sizeof(struct pm8xxx_regulator_core_platform_data)); |
| kfree(mfd_regulators); |
| return -ENOMEM; |
| } |
| for (i = 0; i < ARRAY_SIZE(regulator_data); i++) |
| mutex_init(®ulator_data[i].pc_lock); |
| |
| for (i = 0; i < pdata->num_regulators; i++) { |
| if (!pdata->regulator_pdatas[i].init_data.constraints.name) { |
| pr_err("name missing for regulator %d\n", i); |
| ret = -EINVAL; |
| goto bail; |
| } |
| if (!match_regulator(&cdata[i], |
| pdata->regulator_pdatas[i].init_data.constraints.name)) { |
| ret = -ENODEV; |
| goto bail; |
| } |
| cdata[i].pdata = &(pdata->regulator_pdatas[i]); |
| mfd_regulators[i].name = PM8XXX_REGULATOR_DEV_NAME; |
| mfd_regulators[i].id = cdata[i].pdata->id; |
| mfd_regulators[i].platform_data = &cdata[i]; |
| mfd_regulators[i].pdata_size = |
| sizeof(struct pm8xxx_regulator_core_platform_data); |
| } |
| ret = mfd_add_devices(pmic->dev, 0, mfd_regulators, |
| pdata->num_regulators, NULL, irq_base); |
| if (ret) |
| goto bail; |
| |
| pmic->mfd_regulators = mfd_regulators; |
| pmic->regulator_cdata = cdata; |
| return ret; |
| |
| bail: |
| for (i = 0; i < ARRAY_SIZE(regulator_data); i++) |
| mutex_destroy(®ulator_data[i].pc_lock); |
| kfree(mfd_regulators); |
| kfree(cdata); |
| return ret; |
| } |
| |
| static int __devinit |
| pm8018_add_subdevices(const struct pm8018_platform_data *pdata, |
| struct pm8018 *pmic) |
| { |
| int ret = 0, irq_base = 0; |
| struct pm_irq_chip *irq_chip; |
| |
| if (pdata->irq_pdata) { |
| pdata->irq_pdata->irq_cdata.nirqs = PM8018_NR_IRQS; |
| pdata->irq_pdata->irq_cdata.base_addr = REG_IRQ_BASE; |
| irq_base = pdata->irq_pdata->irq_base; |
| irq_chip = pm8xxx_irq_init(pmic->dev, pdata->irq_pdata); |
| |
| if (IS_ERR(irq_chip)) { |
| pr_err("Failed to init interrupts ret=%ld\n", |
| PTR_ERR(irq_chip)); |
| return PTR_ERR(irq_chip); |
| } |
| pmic->irq_chip = irq_chip; |
| } |
| |
| if (pdata->gpio_pdata) { |
| pdata->gpio_pdata->gpio_cdata.ngpios = PM8018_NR_GPIOS; |
| gpio_cell.platform_data = pdata->gpio_pdata; |
| gpio_cell.pdata_size = sizeof(struct pm8xxx_gpio_platform_data); |
| ret = mfd_add_devices(pmic->dev, 0, &gpio_cell, 1, |
| NULL, irq_base); |
| if (ret) { |
| pr_err("Failed to add gpio subdevice ret=%d\n", ret); |
| goto bail; |
| } |
| } |
| |
| if (pdata->mpp_pdata) { |
| pdata->mpp_pdata->core_data.nmpps = PM8018_NR_MPPS; |
| pdata->mpp_pdata->core_data.base_addr = REG_MPP_BASE; |
| mpp_cell.platform_data = pdata->mpp_pdata; |
| mpp_cell.pdata_size = sizeof(struct pm8xxx_mpp_platform_data); |
| ret = mfd_add_devices(pmic->dev, 0, &mpp_cell, 1, NULL, |
| irq_base); |
| if (ret) { |
| pr_err("Failed to add mpp subdevice ret=%d\n", ret); |
| goto bail; |
| } |
| } |
| |
| if (pdata->rtc_pdata) { |
| rtc_cell.platform_data = pdata->rtc_pdata; |
| rtc_cell.pdata_size = sizeof(struct pm8xxx_rtc_platform_data); |
| ret = mfd_add_devices(pmic->dev, 0, &rtc_cell, 1, NULL, |
| irq_base); |
| if (ret) { |
| pr_err("Failed to add rtc subdevice ret=%d\n", ret); |
| goto bail; |
| } |
| } |
| |
| if (pdata->pwrkey_pdata) { |
| pwrkey_cell.platform_data = pdata->pwrkey_pdata; |
| pwrkey_cell.pdata_size = |
| sizeof(struct pm8xxx_pwrkey_platform_data); |
| ret = mfd_add_devices(pmic->dev, 0, &pwrkey_cell, 1, NULL, |
| irq_base); |
| if (ret) { |
| pr_err("Failed to add pwrkey subdevice ret=%d\n", ret); |
| goto bail; |
| } |
| } |
| |
| if (pdata->misc_pdata) { |
| misc_cell.platform_data = pdata->misc_pdata; |
| misc_cell.pdata_size = sizeof(struct pm8xxx_misc_platform_data); |
| ret = mfd_add_devices(pmic->dev, 0, &misc_cell, 1, NULL, |
| irq_base); |
| if (ret) { |
| pr_err("Failed to add misc subdevice ret=%d\n", ret); |
| goto bail; |
| } |
| } |
| |
| if (pdata->adc_pdata) { |
| adc_cell.platform_data = pdata->adc_pdata; |
| adc_cell.pdata_size = sizeof(struct pm8xxx_adc_platform_data); |
| ret = mfd_add_devices(pmic->dev, 0, &adc_cell, 1, NULL, |
| irq_base); |
| if (ret) { |
| pr_err("Failed to add adc subdevice ret=%d\n", ret); |
| } |
| } |
| |
| if (pdata->leds_pdata) { |
| leds_cell.platform_data = pdata->leds_pdata; |
| leds_cell.pdata_size = sizeof(struct pm8xxx_led_platform_data); |
| ret = mfd_add_devices(pmic->dev, 0, &leds_cell, 1, NULL, 0); |
| if (ret) { |
| pr_err("Failed to add leds subdevice ret=%d\n", ret); |
| goto bail; |
| } |
| } |
| |
| ret = mfd_add_devices(pmic->dev, 0, &debugfs_cell, 1, NULL, irq_base); |
| if (ret) { |
| pr_err("Failed to add debugfs subdevice ret=%d\n", ret); |
| goto bail; |
| } |
| |
| ret = mfd_add_devices(pmic->dev, 0, &pwm_cell, 1, NULL, 0); |
| if (ret) { |
| pr_err("Failed to add pwm subdevice ret=%d\n", ret); |
| goto bail; |
| } |
| |
| if (pdata->num_regulators > 0 && pdata->regulator_pdatas) { |
| ret = pm8018_add_regulators(pdata, pmic, irq_base); |
| if (ret) { |
| pr_err("Failed to add regulator subdevices ret=%d\n", |
| ret); |
| goto bail; |
| } |
| } |
| |
| ret = mfd_add_devices(pmic->dev, 0, &thermal_alarm_cell, 1, NULL, |
| irq_base); |
| if (ret) { |
| pr_err("Failed to add thermal alarm subdevice, ret=%d\n", ret); |
| goto bail; |
| } |
| |
| return 0; |
| bail: |
| if (pmic->irq_chip) { |
| pm8xxx_irq_exit(pmic->irq_chip); |
| pmic->irq_chip = NULL; |
| } |
| return ret; |
| } |
| |
| static const char * const pm8018_rev_names[] = { |
| [PM8XXX_REVISION_8018_TEST] = "test", |
| [PM8XXX_REVISION_8018_1p0] = "1.0", |
| [PM8XXX_REVISION_8018_2p0] = "2.0", |
| [PM8XXX_REVISION_8018_2p1] = "2.1", |
| }; |
| |
| static int __devinit pm8018_probe(struct platform_device *pdev) |
| { |
| const struct pm8018_platform_data *pdata = pdev->dev.platform_data; |
| const char *revision_name = "unknown"; |
| struct pm8018 *pmic; |
| enum pm8xxx_version version; |
| int revision; |
| int rc; |
| u8 val; |
| |
| if (!pdata) { |
| pr_err("missing platform data\n"); |
| return -EINVAL; |
| } |
| |
| pmic = kzalloc(sizeof(struct pm8018), GFP_KERNEL); |
| if (!pmic) { |
| pr_err("Cannot alloc pm8018 struct\n"); |
| return -ENOMEM; |
| } |
| |
| /* Read PMIC chip revision */ |
| rc = msm_ssbi_read(pdev->dev.parent, REG_HWREV, &val, sizeof(val)); |
| if (rc) { |
| pr_err("Failed to read hw rev 1 reg %d:rc=%d\n", REG_HWREV, rc); |
| goto err_read_rev; |
| } |
| pr_info("PMIC revision 1: %02X\n", val); |
| pmic->rev_registers = val; |
| |
| /* Read PMIC chip revision 2 */ |
| rc = msm_ssbi_read(pdev->dev.parent, REG_HWREV_2, &val, sizeof(val)); |
| if (rc) { |
| pr_err("Failed to read hw rev 2 reg %d:rc=%d\n", REG_HWREV_2, |
| rc); |
| goto err_read_rev; |
| } |
| pr_info("PMIC revision 2: %02X\n", val); |
| pmic->rev_registers |= val << BITS_PER_BYTE; |
| |
| pmic->dev = &pdev->dev; |
| pm8018_drvdata.pm_chip_data = pmic; |
| platform_set_drvdata(pdev, &pm8018_drvdata); |
| |
| /* Print out human readable version and revision names. */ |
| version = pm8xxx_get_version(pmic->dev); |
| if (version == PM8XXX_VERSION_8018) { |
| revision = pm8xxx_get_revision(pmic->dev); |
| if (revision >= 0 && revision < ARRAY_SIZE(pm8018_rev_names)) |
| revision_name = pm8018_rev_names[revision]; |
| pr_info("PMIC version: PM8018 rev %s\n", revision_name); |
| } else { |
| WARN_ON(version != PM8XXX_VERSION_8018); |
| } |
| /* Log human readable restart reason */ |
| rc = msm_ssbi_read(pdev->dev.parent, REG_PM8018_PON_CNTRL_3, &val, 1); |
| if (rc) { |
| pr_err("Cannot read restart reason rc=%d\n", rc); |
| goto err_read_rev; |
| } |
| val &= PM8XXX_RESTART_REASON_MASK; |
| pr_info("PMIC Restart Reason: %s\n", pm8xxx_restart_reason_str[val]); |
| pmic->restart_reason = val; |
| |
| rc = pm8018_add_subdevices(pdata, pmic); |
| if (rc) { |
| pr_err("Cannot add subdevices rc=%d\n", rc); |
| goto err; |
| } |
| |
| /* gpio might not work if no irq device is found */ |
| WARN_ON(pmic->irq_chip == NULL); |
| |
| return 0; |
| |
| err: |
| mfd_remove_devices(pmic->dev); |
| platform_set_drvdata(pdev, NULL); |
| kfree(pmic->mfd_regulators); |
| kfree(pmic->regulator_cdata); |
| err_read_rev: |
| kfree(pmic); |
| return rc; |
| } |
| |
| static int __devexit pm8018_remove(struct platform_device *pdev) |
| { |
| struct pm8xxx_drvdata *drvdata; |
| struct pm8018 *pmic = NULL; |
| int i; |
| |
| drvdata = platform_get_drvdata(pdev); |
| if (drvdata) |
| pmic = drvdata->pm_chip_data; |
| if (pmic) { |
| if (pmic->dev) |
| mfd_remove_devices(pmic->dev); |
| if (pmic->irq_chip) { |
| pm8xxx_irq_exit(pmic->irq_chip); |
| pmic->irq_chip = NULL; |
| } |
| if (pmic->mfd_regulators) { |
| for (i = 0; i < ARRAY_SIZE(regulator_data); i++) |
| mutex_destroy(®ulator_data[i].pc_lock); |
| } |
| kfree(pmic->mfd_regulators); |
| kfree(pmic->regulator_cdata); |
| kfree(pmic); |
| } |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pm8018_driver = { |
| .probe = pm8018_probe, |
| .remove = __devexit_p(pm8018_remove), |
| .driver = { |
| .name = PM8018_CORE_DEV_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init pm8018_init(void) |
| { |
| return platform_driver_register(&pm8018_driver); |
| } |
| postcore_initcall(pm8018_init); |
| |
| static void __exit pm8018_exit(void) |
| { |
| platform_driver_unregister(&pm8018_driver); |
| } |
| module_exit(pm8018_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("PMIC 8018 core driver"); |
| MODULE_VERSION("1.0"); |
| MODULE_ALIAS("platform:" PM8018_CORE_DEV_NAME); |