| #include <linux/module.h> |
| #include "edac_mce_amd.h" |
| |
| static bool report_gart_errors; |
| static void (*nb_bus_decoder)(int node_id, struct err_regs *regs); |
| |
| void amd_report_gart_errors(bool v) |
| { |
| report_gart_errors = v; |
| } |
| EXPORT_SYMBOL_GPL(amd_report_gart_errors); |
| |
| void amd_register_ecc_decoder(void (*f)(int, struct err_regs *)) |
| { |
| nb_bus_decoder = f; |
| } |
| EXPORT_SYMBOL_GPL(amd_register_ecc_decoder); |
| |
| void amd_unregister_ecc_decoder(void (*f)(int, struct err_regs *)) |
| { |
| if (nb_bus_decoder) { |
| WARN_ON(nb_bus_decoder != f); |
| |
| nb_bus_decoder = NULL; |
| } |
| } |
| EXPORT_SYMBOL_GPL(amd_unregister_ecc_decoder); |
| |
| /* |
| * string representation for the different MCA reported error types, see F3x48 |
| * or MSR0000_0411. |
| */ |
| const char *tt_msgs[] = { /* transaction type */ |
| "instruction", |
| "data", |
| "generic", |
| "reserved" |
| }; |
| EXPORT_SYMBOL_GPL(tt_msgs); |
| |
| const char *ll_msgs[] = { /* cache level */ |
| "L0", |
| "L1", |
| "L2", |
| "L3/generic" |
| }; |
| EXPORT_SYMBOL_GPL(ll_msgs); |
| |
| const char *rrrr_msgs[] = { |
| "generic", |
| "generic read", |
| "generic write", |
| "data read", |
| "data write", |
| "inst fetch", |
| "prefetch", |
| "evict", |
| "snoop", |
| "reserved RRRR= 9", |
| "reserved RRRR= 10", |
| "reserved RRRR= 11", |
| "reserved RRRR= 12", |
| "reserved RRRR= 13", |
| "reserved RRRR= 14", |
| "reserved RRRR= 15" |
| }; |
| EXPORT_SYMBOL_GPL(rrrr_msgs); |
| |
| const char *pp_msgs[] = { /* participating processor */ |
| "local node originated (SRC)", |
| "local node responded to request (RES)", |
| "local node observed as 3rd party (OBS)", |
| "generic" |
| }; |
| EXPORT_SYMBOL_GPL(pp_msgs); |
| |
| const char *to_msgs[] = { |
| "no timeout", |
| "timed out" |
| }; |
| EXPORT_SYMBOL_GPL(to_msgs); |
| |
| const char *ii_msgs[] = { /* memory or i/o */ |
| "mem access", |
| "reserved", |
| "i/o access", |
| "generic" |
| }; |
| EXPORT_SYMBOL_GPL(ii_msgs); |
| |
| /* |
| * Map the 4 or 5 (family-specific) bits of Extended Error code to the |
| * string table. |
| */ |
| const char *ext_msgs[] = { |
| "K8 ECC error", /* 0_0000b */ |
| "CRC error on link", /* 0_0001b */ |
| "Sync error packets on link", /* 0_0010b */ |
| "Master Abort during link operation", /* 0_0011b */ |
| "Target Abort during link operation", /* 0_0100b */ |
| "Invalid GART PTE entry during table walk", /* 0_0101b */ |
| "Unsupported atomic RMW command received", /* 0_0110b */ |
| "WDT error: NB transaction timeout", /* 0_0111b */ |
| "ECC/ChipKill ECC error", /* 0_1000b */ |
| "SVM DEV Error", /* 0_1001b */ |
| "Link Data error", /* 0_1010b */ |
| "Link/L3/Probe Filter Protocol error", /* 0_1011b */ |
| "NB Internal Arrays Parity error", /* 0_1100b */ |
| "DRAM Address/Control Parity error", /* 0_1101b */ |
| "Link Transmission error", /* 0_1110b */ |
| "GART/DEV Table Walk Data error" /* 0_1111b */ |
| "Res 0x100 error", /* 1_0000b */ |
| "Res 0x101 error", /* 1_0001b */ |
| "Res 0x102 error", /* 1_0010b */ |
| "Res 0x103 error", /* 1_0011b */ |
| "Res 0x104 error", /* 1_0100b */ |
| "Res 0x105 error", /* 1_0101b */ |
| "Res 0x106 error", /* 1_0110b */ |
| "Res 0x107 error", /* 1_0111b */ |
| "Res 0x108 error", /* 1_1000b */ |
| "Res 0x109 error", /* 1_1001b */ |
| "Res 0x10A error", /* 1_1010b */ |
| "Res 0x10B error", /* 1_1011b */ |
| "ECC error in L3 Cache Data", /* 1_1100b */ |
| "L3 Cache Tag error", /* 1_1101b */ |
| "L3 Cache LRU Parity error", /* 1_1110b */ |
| "Probe Filter error" /* 1_1111b */ |
| }; |
| EXPORT_SYMBOL_GPL(ext_msgs); |
| |
| static void amd_decode_dc_mce(u64 mc0_status) |
| { |
| u32 ec = mc0_status & 0xffff; |
| u32 xec = (mc0_status >> 16) & 0xf; |
| |
| pr_emerg(" Data Cache Error"); |
| |
| if (xec == 1 && TLB_ERROR(ec)) |
| pr_cont(": %s TLB multimatch.\n", LL_MSG(ec)); |
| else if (xec == 0) { |
| if (mc0_status & (1ULL << 40)) |
| pr_cont(" during Data Scrub.\n"); |
| else if (TLB_ERROR(ec)) |
| pr_cont(": %s TLB parity error.\n", LL_MSG(ec)); |
| else if (MEM_ERROR(ec)) { |
| u8 ll = ec & 0x3; |
| u8 tt = (ec >> 2) & 0x3; |
| u8 rrrr = (ec >> 4) & 0xf; |
| |
| /* see F10h BKDG (31116), Table 92. */ |
| if (ll == 0x1) { |
| if (tt != 0x1) |
| goto wrong_dc_mce; |
| |
| pr_cont(": Data/Tag %s error.\n", RRRR_MSG(ec)); |
| |
| } else if (ll == 0x2 && rrrr == 0x3) |
| pr_cont(" during L1 linefill from L2.\n"); |
| else |
| goto wrong_dc_mce; |
| } else if (BUS_ERROR(ec) && boot_cpu_data.x86 == 0xf) |
| pr_cont(" during system linefill.\n"); |
| else |
| goto wrong_dc_mce; |
| } else |
| goto wrong_dc_mce; |
| |
| return; |
| |
| wrong_dc_mce: |
| pr_warning("Corrupted DC MCE info?\n"); |
| } |
| |
| static void amd_decode_ic_mce(u64 mc1_status) |
| { |
| u32 ec = mc1_status & 0xffff; |
| u32 xec = (mc1_status >> 16) & 0xf; |
| |
| pr_emerg(" Instruction Cache Error"); |
| |
| if (xec == 1 && TLB_ERROR(ec)) |
| pr_cont(": %s TLB multimatch.\n", LL_MSG(ec)); |
| else if (xec == 0) { |
| if (TLB_ERROR(ec)) |
| pr_cont(": %s TLB Parity error.\n", LL_MSG(ec)); |
| else if (BUS_ERROR(ec)) { |
| if (boot_cpu_data.x86 == 0xf && |
| (mc1_status & (1ULL << 58))) |
| pr_cont(" during system linefill.\n"); |
| else |
| pr_cont(" during attempted NB data read.\n"); |
| } else if (MEM_ERROR(ec)) { |
| u8 ll = ec & 0x3; |
| u8 rrrr = (ec >> 4) & 0xf; |
| |
| if (ll == 0x2) |
| pr_cont(" during a linefill from L2.\n"); |
| else if (ll == 0x1) { |
| |
| switch (rrrr) { |
| case 0x5: |
| pr_cont(": Parity error during " |
| "data load.\n"); |
| break; |
| |
| case 0x7: |
| pr_cont(": Copyback Parity/Victim" |
| " error.\n"); |
| break; |
| |
| case 0x8: |
| pr_cont(": Tag Snoop error.\n"); |
| break; |
| |
| default: |
| goto wrong_ic_mce; |
| break; |
| } |
| } |
| } else |
| goto wrong_ic_mce; |
| } else |
| goto wrong_ic_mce; |
| |
| return; |
| |
| wrong_ic_mce: |
| pr_warning("Corrupted IC MCE info?\n"); |
| } |
| |
| static void amd_decode_bu_mce(u64 mc2_status) |
| { |
| u32 ec = mc2_status & 0xffff; |
| u32 xec = (mc2_status >> 16) & 0xf; |
| |
| pr_emerg(" Bus Unit Error"); |
| |
| if (xec == 0x1) |
| pr_cont(" in the write data buffers.\n"); |
| else if (xec == 0x3) |
| pr_cont(" in the victim data buffers.\n"); |
| else if (xec == 0x2 && MEM_ERROR(ec)) |
| pr_cont(": %s error in the L2 cache tags.\n", RRRR_MSG(ec)); |
| else if (xec == 0x0) { |
| if (TLB_ERROR(ec)) |
| pr_cont(": %s error in a Page Descriptor Cache or " |
| "Guest TLB.\n", TT_MSG(ec)); |
| else if (BUS_ERROR(ec)) |
| pr_cont(": %s/ECC error in data read from NB: %s.\n", |
| RRRR_MSG(ec), PP_MSG(ec)); |
| else if (MEM_ERROR(ec)) { |
| u8 rrrr = (ec >> 4) & 0xf; |
| |
| if (rrrr >= 0x7) |
| pr_cont(": %s error during data copyback.\n", |
| RRRR_MSG(ec)); |
| else if (rrrr <= 0x1) |
| pr_cont(": %s parity/ECC error during data " |
| "access from L2.\n", RRRR_MSG(ec)); |
| else |
| goto wrong_bu_mce; |
| } else |
| goto wrong_bu_mce; |
| } else |
| goto wrong_bu_mce; |
| |
| return; |
| |
| wrong_bu_mce: |
| pr_warning("Corrupted BU MCE info?\n"); |
| } |
| |
| void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors) |
| { |
| u32 ec = ERROR_CODE(regs->nbsl); |
| u32 xec = EXT_ERROR_CODE(regs->nbsl); |
| |
| if (!handle_errors) |
| return; |
| |
| pr_emerg(" Northbridge Error, node %d", node_id); |
| |
| /* |
| * F10h, revD can disable ErrCpu[3:0] so check that first and also the |
| * value encoding has changed so interpret those differently |
| */ |
| if ((boot_cpu_data.x86 == 0x10) && |
| (boot_cpu_data.x86_model > 8)) { |
| if (regs->nbsh & K8_NBSH_ERR_CPU_VAL) |
| pr_cont(", core: %u\n", (u8)(regs->nbsh & 0xf)); |
| } else { |
| pr_cont(", core: %d\n", ilog2((regs->nbsh & 0xf))); |
| } |
| |
| |
| pr_emerg("%s.\n", EXT_ERR_MSG(xec)); |
| |
| if (BUS_ERROR(ec) && nb_bus_decoder) |
| nb_bus_decoder(node_id, regs); |
| } |
| EXPORT_SYMBOL_GPL(amd_decode_nb_mce); |
| |
| static inline void amd_decode_err_code(unsigned int ec) |
| { |
| if (TLB_ERROR(ec)) { |
| /* |
| * GART errors are intended to help graphics driver developers |
| * to detect bad GART PTEs. It is recommended by AMD to disable |
| * GART table walk error reporting by default[1] (currently |
| * being disabled in mce_cpu_quirks()) and according to the |
| * comment in mce_cpu_quirks(), such GART errors can be |
| * incorrectly triggered. We may see these errors anyway and |
| * unless requested by the user, they won't be reported. |
| * |
| * [1] section 13.10.1 on BIOS and Kernel Developers Guide for |
| * AMD NPT family 0Fh processors |
| */ |
| if (!report_gart_errors) |
| return; |
| |
| pr_emerg(" Transaction: %s, Cache Level %s\n", |
| TT_MSG(ec), LL_MSG(ec)); |
| } else if (MEM_ERROR(ec)) { |
| pr_emerg(" Transaction: %s, Type: %s, Cache Level: %s", |
| RRRR_MSG(ec), TT_MSG(ec), LL_MSG(ec)); |
| } else if (BUS_ERROR(ec)) { |
| pr_emerg(" Transaction type: %s(%s), %s, Cache Level: %s, " |
| "Participating Processor: %s\n", |
| RRRR_MSG(ec), II_MSG(ec), TO_MSG(ec), LL_MSG(ec), |
| PP_MSG(ec)); |
| } else |
| pr_warning("Huh? Unknown MCE error 0x%x\n", ec); |
| } |
| |
| void decode_mce(struct mce *m) |
| { |
| struct err_regs regs; |
| int node, ecc; |
| |
| pr_emerg("MC%d_STATUS: ", m->bank); |
| |
| pr_cont("%sorrected error, report: %s, MiscV: %svalid, " |
| "CPU context corrupt: %s", |
| ((m->status & MCI_STATUS_UC) ? "Unc" : "C"), |
| ((m->status & MCI_STATUS_EN) ? "yes" : "no"), |
| ((m->status & MCI_STATUS_MISCV) ? "" : "in"), |
| ((m->status & MCI_STATUS_PCC) ? "yes" : "no")); |
| |
| /* do the two bits[14:13] together */ |
| ecc = m->status & (3ULL << 45); |
| if (ecc) |
| pr_cont(", %sECC Error", ((ecc == 2) ? "C" : "U")); |
| |
| pr_cont("\n"); |
| |
| switch (m->bank) { |
| case 0: |
| amd_decode_dc_mce(m->status); |
| break; |
| |
| case 1: |
| amd_decode_ic_mce(m->status); |
| break; |
| |
| case 2: |
| amd_decode_bu_mce(m->status); |
| break; |
| |
| case 4: |
| regs.nbsl = (u32) m->status; |
| regs.nbsh = (u32)(m->status >> 32); |
| regs.nbeal = (u32) m->addr; |
| regs.nbeah = (u32)(m->addr >> 32); |
| node = per_cpu(cpu_llc_id, m->extcpu); |
| |
| amd_decode_nb_mce(node, ®s, 1); |
| break; |
| |
| default: |
| break; |
| } |
| |
| amd_decode_err_code(m->status & 0xffff); |
| } |