| * Qualcomm HDMI Tx |
| |
| Required properties: |
| - cell-index: hdmi tx controller index |
| - compatible: must be "qcom,hdmi-tx" |
| - reg: offset and length of the register regions(s) for the device. |
| - reg-names: a list of strings that map in order to the list of regs. |
| |
| - hpd-gdsc-supply: phandle to the mdss gdsc regulator device tree node. |
| - hpd-5v-supply: phandle to the 5V regulator device tree node. |
| - core-vdda-supply: phandle to the HDMI vdda regulator device tree node. |
| - core-vcc-supply: phandle to the HDMI vcc regulator device tree node. |
| - qcom,hdmi-tx-supply-names: a list of strings that map in order |
| to the list of supplies. |
| - qcom,hdmi-tx-min-voltage-level: specifies minimum voltage level |
| of supply(ies) mentioned above. |
| - qcom,hdmi-tx-max-voltage-level: specifies maximum voltage level |
| of supply(ies) mentioned above. |
| - qcom,hdmi-tx-peak-current: specifies the peak current that will be |
| drawn from the supply(ies) mentioned above. |
| |
| - qcom,hdmi-tx-cec: gpio for Consumer Electronics Control (cec) line. |
| - qcom,hdmi-tx-ddc-clk: gpio for Display Data Channel (ddc) clock line. |
| - qcom,hdmi-tx-ddc-data: gpio for ddc data line. |
| - qcom,hdmi-tx-hpd: gpio required for HDMI hot-plug detect. |
| |
| Optional properties: |
| - qcom,hdmi-tx-mux-sel: gpio required to toggle HDMI output between |
| docking station, type A, and liquid device, type D, ports. Required |
| property for liquid devices. |
| - qcom,hdmi-tx-mux-en: gpio required to enable mux for HDMI output |
| on liquid devices. Required property for liquid devices. |
| |
| [Optional child nodes]: These nodes are for devices which are |
| dependent on HDMI Tx controller. If HDMI Tx controller is disabled then |
| these devices will be disabled as well. Ex. HDMI Audio Codec device. |
| |
| - qcom,msm-hdmi-audio-rx: Node for HDMI audio codec. |
| Required properties: |
| - compatible : "msm-hdmi-audio-codec-rx"; |
| |
| Example: |
| mdss_hdmi_tx: qcom,hdmi_tx@fd922100 { |
| cell-index = <0>; |
| compatible = "qcom,hdmi-tx"; |
| reg = <0xfd922100 0x35C>, |
| <0xfd922500 0x7C>, |
| <0xfc4b8000 0x60F0>; |
| reg-names = "core_physical", "phy_physical", "qfprom_physical"; |
| |
| hpd-gdsc-supply = <&gdsc_mdss>; |
| hpd-5v-supply = <&pm8941_mvs2>; |
| core-vdda-supply = <&pm8941_l12>; |
| core-vcc-supply = <&pm8941_s3>; |
| qcom,hdmi-tx-supply-names = "hpd-gdsc", "hpd-5v", "core-vdda", "core-vcc"; |
| qcom,hdmi-tx-min-voltage-level = <0 0 1800000 1800000>; |
| qcom,hdmi-tx-max-voltage-level = <0 0 1800000 1800000>; |
| qcom,hdmi-tx-peak-current = <0 0 1800000 0>; |
| |
| qcom,hdmi-tx-cec = <&msmgpio 31 0>; |
| qcom,hdmi-tx-ddc-clk = <&msmgpio 32 0>; |
| qcom,hdmi-tx-ddc-data = <&msmgpio 33 0>; |
| qcom,hdmi-tx-hpd = <&msmgpio 34 0>; |
| |
| qcom,msm-hdmi-audio-rx { |
| compatible = "qcom,msm-hdmi-audio-codec-rx"; |
| }; |
| }; |