drivers/rtc/rtc-omap.c - fp2-dev/kernel/msm - Gitiles

 /*
  * TI OMAP1 Real Time Clock interface for Linux
  *
  * Copyright (C) 2003 MontaVista Software, Inc.
  * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
  *
  * Copyright (C) 2006 David Brownell (new RTC framework)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */

 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 #include <linux/platform_device.h>

 #include <asm/io.h>


 /* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock
  * with century-range alarm matching, driven by the 32kHz clock.
  *
  * The main user-visible ways it differs from PC RTCs are by omitting
  * "don't care" alarm fields and sub-second periodic IRQs, and having
  * an autoadjust mechanism to calibrate to the true oscillator rate.
  *
  * Board-specific wiring options include using split power mode with
  * RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset),
  * and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from
  * low power modes).  See the BOARD-SPECIFIC CUSTOMIZATION comment.
  */

 #define OMAP_RTC_BASE			0xfffb4800

 /* RTC registers */
 #define OMAP_RTC_SECONDS_REG		0x00
 #define OMAP_RTC_MINUTES_REG		0x04
 #define OMAP_RTC_HOURS_REG		0x08
 #define OMAP_RTC_DAYS_REG		0x0C
 #define OMAP_RTC_MONTHS_REG		0x10
 #define OMAP_RTC_YEARS_REG		0x14
 #define OMAP_RTC_WEEKS_REG		0x18

 #define OMAP_RTC_ALARM_SECONDS_REG	0x20
 #define OMAP_RTC_ALARM_MINUTES_REG	0x24
 #define OMAP_RTC_ALARM_HOURS_REG	0x28
 #define OMAP_RTC_ALARM_DAYS_REG		0x2c
 #define OMAP_RTC_ALARM_MONTHS_REG	0x30
 #define OMAP_RTC_ALARM_YEARS_REG	0x34

 #define OMAP_RTC_CTRL_REG		0x40
 #define OMAP_RTC_STATUS_REG		0x44
 #define OMAP_RTC_INTERRUPTS_REG		0x48

 #define OMAP_RTC_COMP_LSB_REG		0x4c
 #define OMAP_RTC_COMP_MSB_REG		0x50
 #define OMAP_RTC_OSC_REG		0x54

 /* OMAP_RTC_CTRL_REG bit fields: */
 #define OMAP_RTC_CTRL_SPLIT		(1<<7)
 #define OMAP_RTC_CTRL_DISABLE		(1<<6)
 #define OMAP_RTC_CTRL_SET_32_COUNTER	(1<<5)
 #define OMAP_RTC_CTRL_TEST		(1<<4)
 #define OMAP_RTC_CTRL_MODE_12_24	(1<<3)
 #define OMAP_RTC_CTRL_AUTO_COMP		(1<<2)
 #define OMAP_RTC_CTRL_ROUND_30S		(1<<1)
 #define OMAP_RTC_CTRL_STOP		(1<<0)

 /* OMAP_RTC_STATUS_REG bit fields: */
 #define OMAP_RTC_STATUS_POWER_UP        (1<<7)
 #define OMAP_RTC_STATUS_ALARM           (1<<6)
 #define OMAP_RTC_STATUS_1D_EVENT        (1<<5)
 #define OMAP_RTC_STATUS_1H_EVENT        (1<<4)
 #define OMAP_RTC_STATUS_1M_EVENT        (1<<3)
 #define OMAP_RTC_STATUS_1S_EVENT        (1<<2)
 #define OMAP_RTC_STATUS_RUN             (1<<1)
 #define OMAP_RTC_STATUS_BUSY            (1<<0)

 /* OMAP_RTC_INTERRUPTS_REG bit fields: */
 #define OMAP_RTC_INTERRUPTS_IT_ALARM    (1<<3)
 #define OMAP_RTC_INTERRUPTS_IT_TIMER    (1<<2)


 #define rtc_read(addr)		omap_readb(OMAP_RTC_BASE + (addr))
 #define rtc_write(val, addr)	omap_writeb(val, OMAP_RTC_BASE + (addr))


 /* we rely on the rtc framework to handle locking (rtc->ops_lock),
  * so the only other requirement is that register accesses which
  * require BUSY to be clear are made with IRQs locally disabled
  */
 static void rtc_wait_not_busy(void)
 {
 	int	count = 0;
 	u8	status;

 	/* BUSY may stay active for 1/32768 second (~30 usec) */
 	for (count = 0; count < 50; count++) {
 		status = rtc_read(OMAP_RTC_STATUS_REG);
 		if ((status & (u8)OMAP_RTC_STATUS_BUSY) == 0)
 			break;
 		udelay(1);
 	}
 	/* now we have ~15 usec to read/write various registers */
 }

 static irqreturn_t rtc_irq(int irq, void *rtc)
 {
 	unsigned long		events = 0;
 	u8			irq_data;

 	irq_data = rtc_read(OMAP_RTC_STATUS_REG);

 	/* alarm irq? */
 	if (irq_data & OMAP_RTC_STATUS_ALARM) {
 		rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
 		events |= RTC_IRQF | RTC_AF;
 	}

 	/* 1/sec periodic/update irq? */
 	if (irq_data & OMAP_RTC_STATUS_1S_EVENT)
 		events |= RTC_IRQF | RTC_UF;

 	rtc_update_irq(rtc, 1, events);

 	return IRQ_HANDLED;
 }

 #ifdef	CONFIG_RTC_INTF_DEV

 static int
 omap_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
 {
 	u8 reg;

 	switch (cmd) {
 	case RTC_AIE_OFF:
 	case RTC_AIE_ON:
 	case RTC_UIE_OFF:
 	case RTC_UIE_ON:
 		break;
 	default:
 		return -ENOIOCTLCMD;
 	}

 	local_irq_disable();
 	rtc_wait_not_busy();
 	reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
 	switch (cmd) {
 	/* AIE = Alarm Interrupt Enable */
 	case RTC_AIE_OFF:
 		reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
 		break;
 	case RTC_AIE_ON:
 		reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
 		break;
 	/* UIE = Update Interrupt Enable (1/second) */
 	case RTC_UIE_OFF:
 		reg &= ~OMAP_RTC_INTERRUPTS_IT_TIMER;
 		break;
 	case RTC_UIE_ON:
 		reg |= OMAP_RTC_INTERRUPTS_IT_TIMER;
 		break;
 	}
 	rtc_wait_not_busy();
 	rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
 	local_irq_enable();

 	return 0;
 }

 #else
 #define	omap_rtc_ioctl	NULL
 #endif

 /* this hardware doesn't support "don't care" alarm fields */
 static int tm2bcd(struct rtc_time *tm)
 {
 	if (rtc_valid_tm(tm) != 0)
 		return -EINVAL;

 	tm->tm_sec = BIN2BCD(tm->tm_sec);
 	tm->tm_min = BIN2BCD(tm->tm_min);
 	tm->tm_hour = BIN2BCD(tm->tm_hour);
 	tm->tm_mday = BIN2BCD(tm->tm_mday);

 	tm->tm_mon = BIN2BCD(tm->tm_mon + 1);

 	/* epoch == 1900 */
 	if (tm->tm_year < 100 || tm->tm_year > 199)
 		return -EINVAL;
 	tm->tm_year = BIN2BCD(tm->tm_year - 100);

 	return 0;
 }

 static void bcd2tm(struct rtc_time *tm)
 {
 	tm->tm_sec = BCD2BIN(tm->tm_sec);
 	tm->tm_min = BCD2BIN(tm->tm_min);
 	tm->tm_hour = BCD2BIN(tm->tm_hour);
 	tm->tm_mday = BCD2BIN(tm->tm_mday);
 	tm->tm_mon = BCD2BIN(tm->tm_mon) - 1;
 	/* epoch == 1900 */
 	tm->tm_year = BCD2BIN(tm->tm_year) + 100;
 }


 static int omap_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	/* we don't report wday/yday/isdst ... */
 	local_irq_disable();
 	rtc_wait_not_busy();

 	tm->tm_sec = rtc_read(OMAP_RTC_SECONDS_REG);
 	tm->tm_min = rtc_read(OMAP_RTC_MINUTES_REG);
 	tm->tm_hour = rtc_read(OMAP_RTC_HOURS_REG);
 	tm->tm_mday = rtc_read(OMAP_RTC_DAYS_REG);
 	tm->tm_mon = rtc_read(OMAP_RTC_MONTHS_REG);
 	tm->tm_year = rtc_read(OMAP_RTC_YEARS_REG);

 	local_irq_enable();

 	bcd2tm(tm);
 	return 0;
 }

 static int omap_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	if (tm2bcd(tm) < 0)
 		return -EINVAL;
 	local_irq_disable();
 	rtc_wait_not_busy();

 	rtc_write(tm->tm_year, OMAP_RTC_YEARS_REG);
 	rtc_write(tm->tm_mon, OMAP_RTC_MONTHS_REG);
 	rtc_write(tm->tm_mday, OMAP_RTC_DAYS_REG);
 	rtc_write(tm->tm_hour, OMAP_RTC_HOURS_REG);
 	rtc_write(tm->tm_min, OMAP_RTC_MINUTES_REG);
 	rtc_write(tm->tm_sec, OMAP_RTC_SECONDS_REG);

 	local_irq_enable();

 	return 0;
 }

 static int omap_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 {
 	local_irq_disable();
 	rtc_wait_not_busy();

 	alm->time.tm_sec = rtc_read(OMAP_RTC_ALARM_SECONDS_REG);
 	alm->time.tm_min = rtc_read(OMAP_RTC_ALARM_MINUTES_REG);
 	alm->time.tm_hour = rtc_read(OMAP_RTC_ALARM_HOURS_REG);
 	alm->time.tm_mday = rtc_read(OMAP_RTC_ALARM_DAYS_REG);
 	alm->time.tm_mon = rtc_read(OMAP_RTC_ALARM_MONTHS_REG);
 	alm->time.tm_year = rtc_read(OMAP_RTC_ALARM_YEARS_REG);

 	local_irq_enable();

 	bcd2tm(&alm->time);
 	alm->enabled = !!(rtc_read(OMAP_RTC_INTERRUPTS_REG)
 			& OMAP_RTC_INTERRUPTS_IT_ALARM);

 	return 0;
 }

 static int omap_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 {
 	u8 reg;

 	if (tm2bcd(&alm->time) < 0)
 		return -EINVAL;

 	local_irq_disable();
 	rtc_wait_not_busy();

 	rtc_write(alm->time.tm_year, OMAP_RTC_ALARM_YEARS_REG);
 	rtc_write(alm->time.tm_mon, OMAP_RTC_ALARM_MONTHS_REG);
 	rtc_write(alm->time.tm_mday, OMAP_RTC_ALARM_DAYS_REG);
 	rtc_write(alm->time.tm_hour, OMAP_RTC_ALARM_HOURS_REG);
 	rtc_write(alm->time.tm_min, OMAP_RTC_ALARM_MINUTES_REG);
 	rtc_write(alm->time.tm_sec, OMAP_RTC_ALARM_SECONDS_REG);

 	reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
 	if (alm->enabled)
 		reg |= OMAP_RTC_INTERRUPTS_IT_ALARM;
 	else
 		reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
 	rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);

 	local_irq_enable();

 	return 0;
 }

 static struct rtc_class_ops omap_rtc_ops = {
 	.ioctl		= omap_rtc_ioctl,
 	.read_time	= omap_rtc_read_time,
 	.set_time	= omap_rtc_set_time,
 	.read_alarm	= omap_rtc_read_alarm,
 	.set_alarm	= omap_rtc_set_alarm,
 };

 static int omap_rtc_alarm;
 static int omap_rtc_timer;

 static int __init omap_rtc_probe(struct platform_device *pdev)
 {
 	struct resource		*res, *mem;
 	struct rtc_device	*rtc;
 	u8			reg, new_ctrl;

 	omap_rtc_timer = platform_get_irq(pdev, 0);
 	if (omap_rtc_timer <= 0) {
 		pr_debug("%s: no update irq?\n", pdev->name);
 		return -ENOENT;
 	}

 	omap_rtc_alarm = platform_get_irq(pdev, 1);
 	if (omap_rtc_alarm <= 0) {
 		pr_debug("%s: no alarm irq?\n", pdev->name);
 		return -ENOENT;
 	}

 	/* NOTE:  using static mapping for RTC registers */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res && res->start != OMAP_RTC_BASE) {
 		pr_debug("%s: RTC registers at %08x, expected %08x\n",
 			pdev->name, (unsigned) res->start, OMAP_RTC_BASE);
 		return -ENOENT;
 	}

 	if (res)
 		mem = request_mem_region(res->start,
 				res->end - res->start + 1,
 				pdev->name);
 	else
 		mem = NULL;
 	if (!mem) {
 		pr_debug("%s: RTC registers at %08x are not free\n",
 			pdev->name, OMAP_RTC_BASE);
 		return -EBUSY;
 	}

 	rtc = rtc_device_register(pdev->name, &pdev->dev,
 			&omap_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
 		pr_debug("%s: can't register RTC device, err %ld\n",
 			pdev->name, PTR_ERR(rtc));
 		goto fail;
 	}
 	platform_set_drvdata(pdev, rtc);
 	dev_set_drvdata(&rtc->dev, mem);

 	/* clear pending irqs, and set 1/second periodic,
 	 * which we'll use instead of update irqs
 	 */
 	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);

 	/* clear old status */
 	reg = rtc_read(OMAP_RTC_STATUS_REG);
 	if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) {
 		pr_info("%s: RTC power up reset detected\n",
 			pdev->name);
 		rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG);
 	}
 	if (reg & (u8) OMAP_RTC_STATUS_ALARM)
 		rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);

 	/* handle periodic and alarm irqs */
 	if (request_irq(omap_rtc_timer, rtc_irq, IRQF_DISABLED,
 			rtc->dev.bus_id, rtc)) {
 		pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
 			pdev->name, omap_rtc_timer);
 		goto fail0;
 	}
 	if (request_irq(omap_rtc_alarm, rtc_irq, IRQF_DISABLED,
 			rtc->dev.bus_id, rtc)) {
 		pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
 			pdev->name, omap_rtc_alarm);
 		goto fail1;
 	}

 	/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
 	reg = rtc_read(OMAP_RTC_CTRL_REG);
 	if (reg & (u8) OMAP_RTC_CTRL_STOP)
 		pr_info("%s: already running\n", pdev->name);

 	/* force to 24 hour mode */
 	new_ctrl = reg & ~(OMAP_RTC_CTRL_SPLIT|OMAP_RTC_CTRL_AUTO_COMP);
 	new_ctrl |= OMAP_RTC_CTRL_STOP;

 	/* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
 	 *
 	 *  - Boards wired so that RTC_WAKE_INT does something, and muxed
 	 *    right (W13_1610_RTC_WAKE_INT is the default after chip reset),
 	 *    should initialize the device wakeup flag appropriately.
 	 *
 	 *  - Boards wired so RTC_ON_nOFF is used as the reset signal,
 	 *    rather than nPWRON_RESET, should forcibly enable split
 	 *    power mode.  (Some chip errata report that RTC_CTRL_SPLIT
 	 *    is write-only, and always reads as zero...)
 	 */
 	device_init_wakeup(&pdev->dev, 0);

 	if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT)
 		pr_info("%s: split power mode\n", pdev->name);

 	if (reg != new_ctrl)
 		rtc_write(new_ctrl, OMAP_RTC_CTRL_REG);

 	return 0;

 fail1:
 	free_irq(omap_rtc_timer, NULL);
 fail0:
 	rtc_device_unregister(rtc);
 fail:
 	release_resource(mem);
 	return -EIO;
 }

 static int __exit omap_rtc_remove(struct platform_device *pdev)
 {
 	struct rtc_device	*rtc = platform_get_drvdata(pdev);;

 	device_init_wakeup(&pdev->dev, 0);

 	/* leave rtc running, but disable irqs */
 	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);

 	free_irq(omap_rtc_timer, rtc);
 	free_irq(omap_rtc_alarm, rtc);

 	release_resource(dev_get_drvdata(&rtc->dev));
 	rtc_device_unregister(rtc);
 	return 0;
 }

 #ifdef CONFIG_PM

 static u8 irqstat;

 static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG);

 	/* FIXME the RTC alarm is not currently acting as a wakeup event
 	 * source, and in fact this enable() call is just saving a flag
 	 * that's never used...
 	 */
 	if (device_may_wakeup(&pdev->dev))
 		enable_irq_wake(omap_rtc_alarm);
 	else
 		rtc_write(0, OMAP_RTC_INTERRUPTS_REG);

 	return 0;
 }

 static int omap_rtc_resume(struct platform_device *pdev)
 {
 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(omap_rtc_alarm);
 	else
 		rtc_write(irqstat, OMAP_RTC_INTERRUPTS_REG);
 	return 0;
 }

 #else
 #define omap_rtc_suspend NULL
 #define omap_rtc_resume  NULL
 #endif

 static void omap_rtc_shutdown(struct platform_device *pdev)
 {
 	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
 }

 MODULE_ALIAS("platform:omap_rtc");
 static struct platform_driver omap_rtc_driver = {
 	.remove		= __exit_p(omap_rtc_remove),
 	.suspend	= omap_rtc_suspend,
 	.resume		= omap_rtc_resume,
 	.shutdown	= omap_rtc_shutdown,
 	.driver		= {
 		.name	= "omap_rtc",
 		.owner	= THIS_MODULE,
 	},
 };

 static int __init rtc_init(void)
 {
 	return platform_driver_probe(&omap_rtc_driver, omap_rtc_probe);
 }
 module_init(rtc_init);

 static void __exit rtc_exit(void)
 {
 	platform_driver_unregister(&omap_rtc_driver);
 }
 module_exit(rtc_exit);

 MODULE_AUTHOR("George G. Davis (and others)");
 MODULE_LICENSE("GPL");
	/*
	* TI OMAP1 Real Time Clock interface for Linux
	*
	* Copyright (C) 2003 MontaVista Software, Inc.
	* Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
	*
	* Copyright (C) 2006 David Brownell (new RTC framework)
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*/

	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/module.h>
	#include <linux/ioport.h>
	#include <linux/delay.h>
	#include <linux/rtc.h>
	#include <linux/bcd.h>
	#include <linux/platform_device.h>

	#include <asm/io.h>


	/* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock
	* with century-range alarm matching, driven by the 32kHz clock.
	*
	* The main user-visible ways it differs from PC RTCs are by omitting
	* "don't care" alarm fields and sub-second periodic IRQs, and having
	* an autoadjust mechanism to calibrate to the true oscillator rate.
	*
	* Board-specific wiring options include using split power mode with
	* RTC_OFF_NOFF used as the reset signal (so the RTC won't be reset),
	* and wiring RTC_WAKE_INT (so the RTC alarm can wake the system from
	* low power modes). See the BOARD-SPECIFIC CUSTOMIZATION comment.
	*/

	#define OMAP_RTC_BASE 0xfffb4800

	/* RTC registers */
	#define OMAP_RTC_SECONDS_REG 0x00
	#define OMAP_RTC_MINUTES_REG 0x04
	#define OMAP_RTC_HOURS_REG 0x08
	#define OMAP_RTC_DAYS_REG 0x0C
	#define OMAP_RTC_MONTHS_REG 0x10
	#define OMAP_RTC_YEARS_REG 0x14
	#define OMAP_RTC_WEEKS_REG 0x18

	#define OMAP_RTC_ALARM_SECONDS_REG 0x20
	#define OMAP_RTC_ALARM_MINUTES_REG 0x24
	#define OMAP_RTC_ALARM_HOURS_REG 0x28
	#define OMAP_RTC_ALARM_DAYS_REG 0x2c
	#define OMAP_RTC_ALARM_MONTHS_REG 0x30
	#define OMAP_RTC_ALARM_YEARS_REG 0x34

	#define OMAP_RTC_CTRL_REG 0x40
	#define OMAP_RTC_STATUS_REG 0x44
	#define OMAP_RTC_INTERRUPTS_REG 0x48

	#define OMAP_RTC_COMP_LSB_REG 0x4c
	#define OMAP_RTC_COMP_MSB_REG 0x50
	#define OMAP_RTC_OSC_REG 0x54

	/* OMAP_RTC_CTRL_REG bit fields: */
	#define OMAP_RTC_CTRL_SPLIT (1<<7)
	#define OMAP_RTC_CTRL_DISABLE (1<<6)
	#define OMAP_RTC_CTRL_SET_32_COUNTER (1<<5)
	#define OMAP_RTC_CTRL_TEST (1<<4)
	#define OMAP_RTC_CTRL_MODE_12_24 (1<<3)
	#define OMAP_RTC_CTRL_AUTO_COMP (1<<2)
	#define OMAP_RTC_CTRL_ROUND_30S (1<<1)
	#define OMAP_RTC_CTRL_STOP (1<<0)

	/* OMAP_RTC_STATUS_REG bit fields: */
	#define OMAP_RTC_STATUS_POWER_UP (1<<7)
	#define OMAP_RTC_STATUS_ALARM (1<<6)
	#define OMAP_RTC_STATUS_1D_EVENT (1<<5)
	#define OMAP_RTC_STATUS_1H_EVENT (1<<4)
	#define OMAP_RTC_STATUS_1M_EVENT (1<<3)
	#define OMAP_RTC_STATUS_1S_EVENT (1<<2)
	#define OMAP_RTC_STATUS_RUN (1<<1)
	#define OMAP_RTC_STATUS_BUSY (1<<0)

	/* OMAP_RTC_INTERRUPTS_REG bit fields: */
	#define OMAP_RTC_INTERRUPTS_IT_ALARM (1<<3)
	#define OMAP_RTC_INTERRUPTS_IT_TIMER (1<<2)


	#define rtc_read(addr) omap_readb(OMAP_RTC_BASE + (addr))
	#define rtc_write(val, addr) omap_writeb(val, OMAP_RTC_BASE + (addr))


	/* we rely on the rtc framework to handle locking (rtc->ops_lock),
	* so the only other requirement is that register accesses which
	* require BUSY to be clear are made with IRQs locally disabled
	*/
	static void rtc_wait_not_busy(void)
	{
	int count = 0;
	u8 status;

	/* BUSY may stay active for 1/32768 second (~30 usec) */
	for (count = 0; count < 50; count++) {
	status = rtc_read(OMAP_RTC_STATUS_REG);
	if ((status & (u8)OMAP_RTC_STATUS_BUSY) == 0)
	break;
	udelay(1);
	}
	/* now we have ~15 usec to read/write various registers */
	}

	static irqreturn_t rtc_irq(int irq, void *rtc)
	{
	unsigned long events = 0;
	u8 irq_data;

	irq_data = rtc_read(OMAP_RTC_STATUS_REG);

	/* alarm irq? */
	if (irq_data & OMAP_RTC_STATUS_ALARM) {
	rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);
	events \|= RTC_IRQF \| RTC_AF;
	}

	/* 1/sec periodic/update irq? */
	if (irq_data & OMAP_RTC_STATUS_1S_EVENT)
	events \|= RTC_IRQF \| RTC_UF;

	rtc_update_irq(rtc, 1, events);

	return IRQ_HANDLED;
	}

	#ifdef CONFIG_RTC_INTF_DEV

	static int
	omap_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
	{
	u8 reg;

	switch (cmd) {
	case RTC_AIE_OFF:
	case RTC_AIE_ON:
	case RTC_UIE_OFF:
	case RTC_UIE_ON:
	break;
	default:
	return -ENOIOCTLCMD;
	}

	local_irq_disable();
	rtc_wait_not_busy();
	reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
	switch (cmd) {
	/* AIE = Alarm Interrupt Enable */
	case RTC_AIE_OFF:
	reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
	break;
	case RTC_AIE_ON:
	reg \|= OMAP_RTC_INTERRUPTS_IT_ALARM;
	break;
	/* UIE = Update Interrupt Enable (1/second) */
	case RTC_UIE_OFF:
	reg &= ~OMAP_RTC_INTERRUPTS_IT_TIMER;
	break;
	case RTC_UIE_ON:
	reg \|= OMAP_RTC_INTERRUPTS_IT_TIMER;
	break;
	}
	rtc_wait_not_busy();
	rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);
	local_irq_enable();

	return 0;
	}

	#else
	#define omap_rtc_ioctl NULL
	#endif

	/* this hardware doesn't support "don't care" alarm fields */
	static int tm2bcd(struct rtc_time *tm)
	{
	if (rtc_valid_tm(tm) != 0)
	return -EINVAL;

	tm->tm_sec = BIN2BCD(tm->tm_sec);
	tm->tm_min = BIN2BCD(tm->tm_min);
	tm->tm_hour = BIN2BCD(tm->tm_hour);
	tm->tm_mday = BIN2BCD(tm->tm_mday);

	tm->tm_mon = BIN2BCD(tm->tm_mon + 1);

	/* epoch == 1900 */
	if (tm->tm_year < 100 \|\| tm->tm_year > 199)
	return -EINVAL;
	tm->tm_year = BIN2BCD(tm->tm_year - 100);

	return 0;
	}

	static void bcd2tm(struct rtc_time *tm)
	{
	tm->tm_sec = BCD2BIN(tm->tm_sec);
	tm->tm_min = BCD2BIN(tm->tm_min);
	tm->tm_hour = BCD2BIN(tm->tm_hour);
	tm->tm_mday = BCD2BIN(tm->tm_mday);
	tm->tm_mon = BCD2BIN(tm->tm_mon) - 1;
	/* epoch == 1900 */
	tm->tm_year = BCD2BIN(tm->tm_year) + 100;
	}


	static int omap_rtc_read_time(struct device dev, struct rtc_time tm)
	{
	/* we don't report wday/yday/isdst ... */
	local_irq_disable();
	rtc_wait_not_busy();

	tm->tm_sec = rtc_read(OMAP_RTC_SECONDS_REG);
	tm->tm_min = rtc_read(OMAP_RTC_MINUTES_REG);
	tm->tm_hour = rtc_read(OMAP_RTC_HOURS_REG);
	tm->tm_mday = rtc_read(OMAP_RTC_DAYS_REG);
	tm->tm_mon = rtc_read(OMAP_RTC_MONTHS_REG);
	tm->tm_year = rtc_read(OMAP_RTC_YEARS_REG);

	local_irq_enable();

	bcd2tm(tm);
	return 0;
	}

	static int omap_rtc_set_time(struct device dev, struct rtc_time tm)
	{
	if (tm2bcd(tm) < 0)
	return -EINVAL;
	local_irq_disable();
	rtc_wait_not_busy();

	rtc_write(tm->tm_year, OMAP_RTC_YEARS_REG);
	rtc_write(tm->tm_mon, OMAP_RTC_MONTHS_REG);
	rtc_write(tm->tm_mday, OMAP_RTC_DAYS_REG);
	rtc_write(tm->tm_hour, OMAP_RTC_HOURS_REG);
	rtc_write(tm->tm_min, OMAP_RTC_MINUTES_REG);
	rtc_write(tm->tm_sec, OMAP_RTC_SECONDS_REG);

	local_irq_enable();

	return 0;
	}

	static int omap_rtc_read_alarm(struct device dev, struct rtc_wkalrm alm)
	{
	local_irq_disable();
	rtc_wait_not_busy();

	alm->time.tm_sec = rtc_read(OMAP_RTC_ALARM_SECONDS_REG);
	alm->time.tm_min = rtc_read(OMAP_RTC_ALARM_MINUTES_REG);
	alm->time.tm_hour = rtc_read(OMAP_RTC_ALARM_HOURS_REG);
	alm->time.tm_mday = rtc_read(OMAP_RTC_ALARM_DAYS_REG);
	alm->time.tm_mon = rtc_read(OMAP_RTC_ALARM_MONTHS_REG);
	alm->time.tm_year = rtc_read(OMAP_RTC_ALARM_YEARS_REG);

	local_irq_enable();

	bcd2tm(&alm->time);
	alm->enabled = !!(rtc_read(OMAP_RTC_INTERRUPTS_REG)
	& OMAP_RTC_INTERRUPTS_IT_ALARM);

	return 0;
	}

	static int omap_rtc_set_alarm(struct device dev, struct rtc_wkalrm alm)
	{
	u8 reg;

	if (tm2bcd(&alm->time) < 0)
	return -EINVAL;

	local_irq_disable();
	rtc_wait_not_busy();

	rtc_write(alm->time.tm_year, OMAP_RTC_ALARM_YEARS_REG);
	rtc_write(alm->time.tm_mon, OMAP_RTC_ALARM_MONTHS_REG);
	rtc_write(alm->time.tm_mday, OMAP_RTC_ALARM_DAYS_REG);
	rtc_write(alm->time.tm_hour, OMAP_RTC_ALARM_HOURS_REG);
	rtc_write(alm->time.tm_min, OMAP_RTC_ALARM_MINUTES_REG);
	rtc_write(alm->time.tm_sec, OMAP_RTC_ALARM_SECONDS_REG);

	reg = rtc_read(OMAP_RTC_INTERRUPTS_REG);
	if (alm->enabled)
	reg \|= OMAP_RTC_INTERRUPTS_IT_ALARM;
	else
	reg &= ~OMAP_RTC_INTERRUPTS_IT_ALARM;
	rtc_write(reg, OMAP_RTC_INTERRUPTS_REG);

	local_irq_enable();

	return 0;
	}

	static struct rtc_class_ops omap_rtc_ops = {
	.ioctl = omap_rtc_ioctl,
	.read_time = omap_rtc_read_time,
	.set_time = omap_rtc_set_time,
	.read_alarm = omap_rtc_read_alarm,
	.set_alarm = omap_rtc_set_alarm,
	};

	static int omap_rtc_alarm;
	static int omap_rtc_timer;

	static int __init omap_rtc_probe(struct platform_device *pdev)
	{
	struct resource res, mem;
	struct rtc_device *rtc;
	u8 reg, new_ctrl;

	omap_rtc_timer = platform_get_irq(pdev, 0);
	if (omap_rtc_timer <= 0) {
	pr_debug("%s: no update irq?\n", pdev->name);
	return -ENOENT;
	}

	omap_rtc_alarm = platform_get_irq(pdev, 1);
	if (omap_rtc_alarm <= 0) {
	pr_debug("%s: no alarm irq?\n", pdev->name);
	return -ENOENT;
	}

	/* NOTE: using static mapping for RTC registers */
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (res && res->start != OMAP_RTC_BASE) {
	pr_debug("%s: RTC registers at %08x, expected %08x\n",
	pdev->name, (unsigned) res->start, OMAP_RTC_BASE);
	return -ENOENT;
	}

	if (res)
	mem = request_mem_region(res->start,
	res->end - res->start + 1,
	pdev->name);
	else
	mem = NULL;
	if (!mem) {
	pr_debug("%s: RTC registers at %08x are not free\n",
	pdev->name, OMAP_RTC_BASE);
	return -EBUSY;
	}

	rtc = rtc_device_register(pdev->name, &pdev->dev,
	&omap_rtc_ops, THIS_MODULE);
	if (IS_ERR(rtc)) {
	pr_debug("%s: can't register RTC device, err %ld\n",
	pdev->name, PTR_ERR(rtc));
	goto fail;
	}
	platform_set_drvdata(pdev, rtc);
	dev_set_drvdata(&rtc->dev, mem);

	/* clear pending irqs, and set 1/second periodic,
	* which we'll use instead of update irqs
	*/
	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);

	/* clear old status */
	reg = rtc_read(OMAP_RTC_STATUS_REG);
	if (reg & (u8) OMAP_RTC_STATUS_POWER_UP) {
	pr_info("%s: RTC power up reset detected\n",
	pdev->name);
	rtc_write(OMAP_RTC_STATUS_POWER_UP, OMAP_RTC_STATUS_REG);
	}
	if (reg & (u8) OMAP_RTC_STATUS_ALARM)
	rtc_write(OMAP_RTC_STATUS_ALARM, OMAP_RTC_STATUS_REG);

	/* handle periodic and alarm irqs */
	if (request_irq(omap_rtc_timer, rtc_irq, IRQF_DISABLED,
	rtc->dev.bus_id, rtc)) {
	pr_debug("%s: RTC timer interrupt IRQ%d already claimed\n",
	pdev->name, omap_rtc_timer);
	goto fail0;
	}
	if (request_irq(omap_rtc_alarm, rtc_irq, IRQF_DISABLED,
	rtc->dev.bus_id, rtc)) {
	pr_debug("%s: RTC alarm interrupt IRQ%d already claimed\n",
	pdev->name, omap_rtc_alarm);
	goto fail1;
	}

	/* On boards with split power, RTC_ON_NOFF won't reset the RTC */
	reg = rtc_read(OMAP_RTC_CTRL_REG);
	if (reg & (u8) OMAP_RTC_CTRL_STOP)
	pr_info("%s: already running\n", pdev->name);

	/* force to 24 hour mode */
	new_ctrl = reg & ~(OMAP_RTC_CTRL_SPLIT\|OMAP_RTC_CTRL_AUTO_COMP);
	new_ctrl \|= OMAP_RTC_CTRL_STOP;

	/* BOARD-SPECIFIC CUSTOMIZATION CAN GO HERE:
	*
	* - Boards wired so that RTC_WAKE_INT does something, and muxed
	* right (W13_1610_RTC_WAKE_INT is the default after chip reset),
	* should initialize the device wakeup flag appropriately.
	*
	* - Boards wired so RTC_ON_nOFF is used as the reset signal,
	* rather than nPWRON_RESET, should forcibly enable split
	* power mode. (Some chip errata report that RTC_CTRL_SPLIT
	* is write-only, and always reads as zero...)
	*/
	device_init_wakeup(&pdev->dev, 0);

	if (new_ctrl & (u8) OMAP_RTC_CTRL_SPLIT)
	pr_info("%s: split power mode\n", pdev->name);

	if (reg != new_ctrl)
	rtc_write(new_ctrl, OMAP_RTC_CTRL_REG);

	return 0;

	fail1:
	free_irq(omap_rtc_timer, NULL);
	fail0:
	rtc_device_unregister(rtc);
	fail:
	release_resource(mem);
	return -EIO;
	}

	static int __exit omap_rtc_remove(struct platform_device *pdev)
	{
	struct rtc_device *rtc = platform_get_drvdata(pdev);;

	device_init_wakeup(&pdev->dev, 0);

	/* leave rtc running, but disable irqs */
	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);

	free_irq(omap_rtc_timer, rtc);
	free_irq(omap_rtc_alarm, rtc);

	release_resource(dev_get_drvdata(&rtc->dev));
	rtc_device_unregister(rtc);
	return 0;
	}

	#ifdef CONFIG_PM

	static u8 irqstat;

	static int omap_rtc_suspend(struct platform_device *pdev, pm_message_t state)
	{
	irqstat = rtc_read(OMAP_RTC_INTERRUPTS_REG);

	/* FIXME the RTC alarm is not currently acting as a wakeup event
	* source, and in fact this enable() call is just saving a flag
	* that's never used...
	*/
	if (device_may_wakeup(&pdev->dev))
	enable_irq_wake(omap_rtc_alarm);
	else
	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);

	return 0;
	}

	static int omap_rtc_resume(struct platform_device *pdev)
	{
	if (device_may_wakeup(&pdev->dev))
	disable_irq_wake(omap_rtc_alarm);
	else
	rtc_write(irqstat, OMAP_RTC_INTERRUPTS_REG);
	return 0;
	}

	#else
	#define omap_rtc_suspend NULL
	#define omap_rtc_resume NULL
	#endif

	static void omap_rtc_shutdown(struct platform_device *pdev)
	{
	rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
	}

	MODULE_ALIAS("platform:omap_rtc");
	static struct platform_driver omap_rtc_driver = {
	.remove = __exit_p(omap_rtc_remove),
	.suspend = omap_rtc_suspend,
	.resume = omap_rtc_resume,
	.shutdown = omap_rtc_shutdown,
	.driver = {
	.name = "omap_rtc",
	.owner = THIS_MODULE,
	},
	};

	static int __init rtc_init(void)
	{
	return platform_driver_probe(&omap_rtc_driver, omap_rtc_probe);
	}
	module_init(rtc_init);

	static void __exit rtc_exit(void)
	{
	platform_driver_unregister(&omap_rtc_driver);
	}
	module_exit(rtc_exit);

	MODULE_AUTHOR("George G. Davis (and others)");
	MODULE_LICENSE("GPL");