drm: Propagate failure from setting crtc base.
Check the error paths within intel_pipe_set_base() to first cleanup and
then report back the error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a440d0d..ac92799 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -343,7 +343,7 @@
udelay(20000);
}
-static void
+static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
@@ -361,11 +361,21 @@
int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
u32 dspcntr, alignment;
+ int ret;
/* no fb bound */
if (!crtc->fb) {
DRM_DEBUG("No FB bound\n");
- return;
+ return 0;
+ }
+
+ switch (pipe) {
+ case 0:
+ case 1:
+ break;
+ default:
+ DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+ return -EINVAL;
}
intel_fb = to_intel_framebuffer(crtc->fb);
@@ -383,20 +393,24 @@
case I915_TILING_Y:
/* FIXME: Is this true? */
DRM_ERROR("Y tiled not allowed for scan out buffers\n");
- return;
+ return -EINVAL;
default:
BUG();
}
- if (i915_gem_object_pin(intel_fb->obj, alignment))
- return;
+ mutex_lock(&dev->struct_mutex);
+ ret = i915_gem_object_pin(intel_fb->obj, alignment);
+ if (ret != 0) {
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+ }
- i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
-
- Start = obj_priv->gtt_offset;
- Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
-
- I915_WRITE(dspstride, crtc->fb->pitch);
+ ret = i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1);
+ if (ret != 0) {
+ i915_gem_object_unpin(intel_fb->obj);
+ mutex_unlock(&dev->struct_mutex);
+ return ret;
+ }
dspcntr = I915_READ(dspcntr_reg);
/* Mask out pixel format bits in case we change it */
@@ -417,11 +431,17 @@
break;
default:
DRM_ERROR("Unknown color depth\n");
- return;
+ i915_gem_object_unpin(intel_fb->obj);
+ mutex_unlock(&dev->struct_mutex);
+ return -EINVAL;
}
I915_WRITE(dspcntr_reg, dspcntr);
+ Start = obj_priv->gtt_offset;
+ Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+ I915_WRITE(dspstride, crtc->fb->pitch);
if (IS_I965G(dev)) {
I915_WRITE(dspbase, Offset);
I915_READ(dspbase);
@@ -438,27 +458,24 @@
intel_fb = to_intel_framebuffer(old_fb);
i915_gem_object_unpin(intel_fb->obj);
}
+ mutex_unlock(&dev->struct_mutex);
if (!dev->primary->master)
- return;
+ return 0;
master_priv = dev->primary->master->driver_priv;
if (!master_priv->sarea_priv)
- return;
+ return 0;
- switch (pipe) {
- case 0:
- master_priv->sarea_priv->pipeA_x = x;
- master_priv->sarea_priv->pipeA_y = y;
- break;
- case 1:
+ if (pipe) {
master_priv->sarea_priv->pipeB_x = x;
master_priv->sarea_priv->pipeB_y = y;
- break;
- default:
- DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
- break;
+ } else {
+ master_priv->sarea_priv->pipeA_x = x;
+ master_priv->sarea_priv->pipeA_y = y;
}
+
+ return 0;
}
@@ -706,11 +723,11 @@
return 1;
}
-static void intel_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
+static int intel_crtc_mode_set(struct drm_crtc *crtc,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -737,6 +754,7 @@
bool is_crt = false, is_lvds = false, is_tv = false;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_connector *connector;
+ int ret;
drm_vblank_pre_modeset(dev, pipe);
@@ -777,7 +795,7 @@
ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock);
if (!ok) {
DRM_ERROR("Couldn't find PLL settings for mode!\n");
- return;
+ return -EINVAL;
}
fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
@@ -948,9 +966,13 @@
I915_WRITE(dspcntr_reg, dspcntr);
/* Flush the plane changes */
- intel_pipe_set_base(crtc, x, y, old_fb);
+ ret = intel_pipe_set_base(crtc, x, y, old_fb);
+ if (ret != 0)
+ return ret;
drm_vblank_post_modeset(dev, pipe);
+
+ return 0;
}
/** Loads the palette/gamma unit for the CRTC with the prepared values */