blob: c4c8ae4123d522d4f342f2ebc8ddff1e69126a05 [file] [log] [blame]
/*
* at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
*
* Copyright (C) 2011 Atmel,
* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "at91sam9g45.dtsi"
/ {
model = "Atmel AT91SAM9M10G45-EK";
compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
chosen {
bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
};
memory@70000000 {
reg = <0x70000000 0x4000000>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
main_clock: clock@0 {
compatible = "atmel,osc", "fixed-clock";
clock-frequency = <12000000>;
};
};
ahb {
apb {
dbgu: serial@ffffee00 {
status = "okay";
};
usart1: serial@fff90000 {
status = "okay";
};
macb0: ethernet@fffbc000 {
phy-mode = "rmii";
status = "okay";
};
};
nand0: nand@40000000 {
nand-bus-width = <8>;
nand-ecc-mode = "soft";
nand-on-flash-bbt;
status = "okay";
boot@0 {
label = "bootstrap/uboot/kernel";
reg = <0x0 0x400000>;
};
rootfs@400000 {
label = "rootfs";
reg = <0x400000 0x3C00000>;
};
data@4000000 {
label = "data";
reg = <0x4000000 0xC000000>;
};
};
usb0: ohci@00700000 {
status = "okay";
num-ports = <2>;
atmel,vbus-gpio = <&pioD 1 0
&pioD 3 0>;
};
usb1: ehci@00800000 {
status = "okay";
};
};
leds {
compatible = "gpio-leds";
d8 {
label = "d8";
gpios = <&pioD 30 0>;
linux,default-trigger = "heartbeat";
};
d6 {
label = "d6";
gpios = <&pioD 0 1>;
linux,default-trigger = "nand-disk";
};
d7 {
label = "d7";
gpios = <&pioD 31 1>;
linux,default-trigger = "mmc0";
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
left_click {
label = "left_click";
gpios = <&pioB 6 1>;
linux,code = <272>;
gpio-key,wakeup;
};
right_click {
label = "right_click";
gpios = <&pioB 7 1>;
linux,code = <273>;
gpio-key,wakeup;
};
left {
label = "Joystick Left";
gpios = <&pioB 14 1>;
linux,code = <105>;
};
right {
label = "Joystick Right";
gpios = <&pioB 15 1>;
linux,code = <106>;
};
up {
label = "Joystick Up";
gpios = <&pioB 16 1>;
linux,code = <103>;
};
down {
label = "Joystick Down";
gpios = <&pioB 17 1>;
linux,code = <108>;
};
enter {
label = "Joystick Press";
gpios = <&pioB 18 1>;
linux,code = <28>;
};
};
};