| /* |
| A Davicom DM9102/DM9102A/DM9102A+DM9801/DM9102A+DM9802 NIC fast |
| ethernet driver for Linux. |
| Copyright (C) 1997 Sten Wang |
| |
| This program is free software; you can redistribute it and/or |
| modify it under the terms of the GNU General Public License |
| as published by the Free Software Foundation; either version 2 |
| of the License, or (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| DAVICOM Web-Site: www.davicom.com.tw |
| |
| Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw |
| Maintainer: Tobias Ringstrom <tori@unhappy.mine.nu> |
| |
| (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved. |
| |
| Marcelo Tosatti <marcelo@conectiva.com.br> : |
| Made it compile in 2.3 (device to net_device) |
| |
| Alan Cox <alan@lxorguk.ukuu.org.uk> : |
| Cleaned up for kernel merge. |
| Removed the back compatibility support |
| Reformatted, fixing spelling etc as I went |
| Removed IRQ 0-15 assumption |
| |
| Jeff Garzik <jgarzik@pobox.com> : |
| Updated to use new PCI driver API. |
| Resource usage cleanups. |
| Report driver version to user. |
| |
| Tobias Ringstrom <tori@unhappy.mine.nu> : |
| Cleaned up and added SMP safety. Thanks go to Jeff Garzik, |
| Andrew Morton and Frank Davis for the SMP safety fixes. |
| |
| Vojtech Pavlik <vojtech@suse.cz> : |
| Cleaned up pointer arithmetics. |
| Fixed a lot of 64bit issues. |
| Cleaned up printk()s a bit. |
| Fixed some obvious big endian problems. |
| |
| Tobias Ringstrom <tori@unhappy.mine.nu> : |
| Use time_after for jiffies calculation. Added ethtool |
| support. Updated PCI resource allocation. Do not |
| forget to unmap PCI mapped skbs. |
| |
| Alan Cox <alan@lxorguk.ukuu.org.uk> |
| Added new PCI identifiers provided by Clear Zhang at ALi |
| for their 1563 ethernet device. |
| |
| TODO |
| |
| Check on 64 bit boxes. |
| Check and fix on big endian boxes. |
| |
| Test and make sure PCI latency is now correct for all cases. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #define DRV_NAME "dmfe" |
| #define DRV_VERSION "1.36.4" |
| #define DRV_RELDATE "2002-01-17" |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/ptrace.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/skbuff.h> |
| #include <linux/delay.h> |
| #include <linux/spinlock.h> |
| #include <linux/crc32.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/dma.h> |
| #include <asm/uaccess.h> |
| #include <asm/irq.h> |
| |
| #ifdef CONFIG_TULIP_DM910X |
| #include <linux/of.h> |
| #endif |
| |
| |
| /* Board/System/Debug information/definition ---------------- */ |
| #define PCI_DM9132_ID 0x91321282 /* Davicom DM9132 ID */ |
| #define PCI_DM9102_ID 0x91021282 /* Davicom DM9102 ID */ |
| #define PCI_DM9100_ID 0x91001282 /* Davicom DM9100 ID */ |
| #define PCI_DM9009_ID 0x90091282 /* Davicom DM9009 ID */ |
| |
| #define DM9102_IO_SIZE 0x80 |
| #define DM9102A_IO_SIZE 0x100 |
| #define TX_MAX_SEND_CNT 0x1 /* Maximum tx packet per time */ |
| #define TX_DESC_CNT 0x10 /* Allocated Tx descriptors */ |
| #define RX_DESC_CNT 0x20 /* Allocated Rx descriptors */ |
| #define TX_FREE_DESC_CNT (TX_DESC_CNT - 2) /* Max TX packet count */ |
| #define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3) /* TX wakeup count */ |
| #define DESC_ALL_CNT (TX_DESC_CNT + RX_DESC_CNT) |
| #define TX_BUF_ALLOC 0x600 |
| #define RX_ALLOC_SIZE 0x620 |
| #define DM910X_RESET 1 |
| #define CR0_DEFAULT 0x00E00000 /* TX & RX burst mode */ |
| #define CR6_DEFAULT 0x00080000 /* HD */ |
| #define CR7_DEFAULT 0x180c1 |
| #define CR15_DEFAULT 0x06 /* TxJabber RxWatchdog */ |
| #define TDES0_ERR_MASK 0x4302 /* TXJT, LC, EC, FUE */ |
| #define MAX_PACKET_SIZE 1514 |
| #define DMFE_MAX_MULTICAST 14 |
| #define RX_COPY_SIZE 100 |
| #define MAX_CHECK_PACKET 0x8000 |
| #define DM9801_NOISE_FLOOR 8 |
| #define DM9802_NOISE_FLOOR 5 |
| |
| #define DMFE_WOL_LINKCHANGE 0x20000000 |
| #define DMFE_WOL_SAMPLEPACKET 0x10000000 |
| #define DMFE_WOL_MAGICPACKET 0x08000000 |
| |
| |
| #define DMFE_10MHF 0 |
| #define DMFE_100MHF 1 |
| #define DMFE_10MFD 4 |
| #define DMFE_100MFD 5 |
| #define DMFE_AUTO 8 |
| #define DMFE_1M_HPNA 0x10 |
| |
| #define DMFE_TXTH_72 0x400000 /* TX TH 72 byte */ |
| #define DMFE_TXTH_96 0x404000 /* TX TH 96 byte */ |
| #define DMFE_TXTH_128 0x0000 /* TX TH 128 byte */ |
| #define DMFE_TXTH_256 0x4000 /* TX TH 256 byte */ |
| #define DMFE_TXTH_512 0x8000 /* TX TH 512 byte */ |
| #define DMFE_TXTH_1K 0xC000 /* TX TH 1K byte */ |
| |
| #define DMFE_TIMER_WUT (jiffies + HZ * 1)/* timer wakeup time : 1 second */ |
| #define DMFE_TX_TIMEOUT ((3*HZ)/2) /* tx packet time-out time 1.5 s" */ |
| #define DMFE_TX_KICK (HZ/2) /* tx packet Kick-out time 0.5 s" */ |
| |
| #define DMFE_DBUG(dbug_now, msg, value) \ |
| do { \ |
| if (dmfe_debug || (dbug_now)) \ |
| pr_err("%s %lx\n", \ |
| (msg), (long) (value)); \ |
| } while (0) |
| |
| #define SHOW_MEDIA_TYPE(mode) \ |
| pr_info("Change Speed to %sMhz %s duplex\n" , \ |
| (mode & 1) ? "100":"10", \ |
| (mode & 4) ? "full":"half"); |
| |
| |
| /* CR9 definition: SROM/MII */ |
| #define CR9_SROM_READ 0x4800 |
| #define CR9_SRCS 0x1 |
| #define CR9_SRCLK 0x2 |
| #define CR9_CRDOUT 0x8 |
| #define SROM_DATA_0 0x0 |
| #define SROM_DATA_1 0x4 |
| #define PHY_DATA_1 0x20000 |
| #define PHY_DATA_0 0x00000 |
| #define MDCLKH 0x10000 |
| |
| #define PHY_POWER_DOWN 0x800 |
| |
| #define SROM_V41_CODE 0x14 |
| |
| #define SROM_CLK_WRITE(data, ioaddr) \ |
| outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ |
| udelay(5); \ |
| outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr); \ |
| udelay(5); \ |
| outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr); \ |
| udelay(5); |
| |
| #define __CHK_IO_SIZE(pci_id, dev_rev) \ |
| (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \ |
| DM9102A_IO_SIZE: DM9102_IO_SIZE) |
| |
| #define CHK_IO_SIZE(pci_dev) \ |
| (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \ |
| (pci_dev)->revision)) |
| |
| /* Sten Check */ |
| #define DEVICE net_device |
| |
| /* Structure/enum declaration ------------------------------- */ |
| struct tx_desc { |
| __le32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */ |
| char *tx_buf_ptr; /* Data for us */ |
| struct tx_desc *next_tx_desc; |
| } __attribute__(( aligned(32) )); |
| |
| struct rx_desc { |
| __le32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */ |
| struct sk_buff *rx_skb_ptr; /* Data for us */ |
| struct rx_desc *next_rx_desc; |
| } __attribute__(( aligned(32) )); |
| |
| struct dmfe_board_info { |
| u32 chip_id; /* Chip vendor/Device ID */ |
| u8 chip_revision; /* Chip revision */ |
| struct DEVICE *next_dev; /* next device */ |
| struct pci_dev *pdev; /* PCI device */ |
| spinlock_t lock; |
| |
| long ioaddr; /* I/O base address */ |
| u32 cr0_data; |
| u32 cr5_data; |
| u32 cr6_data; |
| u32 cr7_data; |
| u32 cr15_data; |
| |
| /* pointer for memory physical address */ |
| dma_addr_t buf_pool_dma_ptr; /* Tx buffer pool memory */ |
| dma_addr_t buf_pool_dma_start; /* Tx buffer pool align dword */ |
| dma_addr_t desc_pool_dma_ptr; /* descriptor pool memory */ |
| dma_addr_t first_tx_desc_dma; |
| dma_addr_t first_rx_desc_dma; |
| |
| /* descriptor pointer */ |
| unsigned char *buf_pool_ptr; /* Tx buffer pool memory */ |
| unsigned char *buf_pool_start; /* Tx buffer pool align dword */ |
| unsigned char *desc_pool_ptr; /* descriptor pool memory */ |
| struct tx_desc *first_tx_desc; |
| struct tx_desc *tx_insert_ptr; |
| struct tx_desc *tx_remove_ptr; |
| struct rx_desc *first_rx_desc; |
| struct rx_desc *rx_insert_ptr; |
| struct rx_desc *rx_ready_ptr; /* packet come pointer */ |
| unsigned long tx_packet_cnt; /* transmitted packet count */ |
| unsigned long tx_queue_cnt; /* wait to send packet count */ |
| unsigned long rx_avail_cnt; /* available rx descriptor count */ |
| unsigned long interval_rx_cnt; /* rx packet count a callback time */ |
| |
| u16 HPNA_command; /* For HPNA register 16 */ |
| u16 HPNA_timer; /* For HPNA remote device check */ |
| u16 dbug_cnt; |
| u16 NIC_capability; /* NIC media capability */ |
| u16 PHY_reg4; /* Saved Phyxcer register 4 value */ |
| |
| u8 HPNA_present; /* 0:none, 1:DM9801, 2:DM9802 */ |
| u8 chip_type; /* Keep DM9102A chip type */ |
| u8 media_mode; /* user specify media mode */ |
| u8 op_mode; /* real work media mode */ |
| u8 phy_addr; |
| u8 wait_reset; /* Hardware failed, need to reset */ |
| u8 dm910x_chk_mode; /* Operating mode check */ |
| u8 first_in_callback; /* Flag to record state */ |
| u8 wol_mode; /* user WOL settings */ |
| struct timer_list timer; |
| |
| /* Driver defined statistic counter */ |
| unsigned long tx_fifo_underrun; |
| unsigned long tx_loss_carrier; |
| unsigned long tx_no_carrier; |
| unsigned long tx_late_collision; |
| unsigned long tx_excessive_collision; |
| unsigned long tx_jabber_timeout; |
| unsigned long reset_count; |
| unsigned long reset_cr8; |
| unsigned long reset_fatal; |
| unsigned long reset_TXtimeout; |
| |
| /* NIC SROM data */ |
| unsigned char srom[128]; |
| }; |
| |
| enum dmfe_offsets { |
| DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20, |
| DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48, |
| DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70, |
| DCR15 = 0x78 |
| }; |
| |
| enum dmfe_CR6_bits { |
| CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80, |
| CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000, |
| CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000 |
| }; |
| |
| /* Global variable declaration ----------------------------- */ |
| static int __devinitdata printed_version; |
| static const char version[] __devinitconst = |
| KERN_INFO DRV_NAME ": Davicom DM9xxx net driver, version " |
| DRV_VERSION " (" DRV_RELDATE ")\n"; |
| |
| static int dmfe_debug; |
| static unsigned char dmfe_media_mode = DMFE_AUTO; |
| static u32 dmfe_cr6_user_set; |
| |
| /* For module input parameter */ |
| static int debug; |
| static u32 cr6set; |
| static unsigned char mode = 8; |
| static u8 chkmode = 1; |
| static u8 HPNA_mode; /* Default: Low Power/High Speed */ |
| static u8 HPNA_rx_cmd; /* Default: Disable Rx remote command */ |
| static u8 HPNA_tx_cmd; /* Default: Don't issue remote command */ |
| static u8 HPNA_NoiseFloor; /* Default: HPNA NoiseFloor */ |
| static u8 SF_mode; /* Special Function: 1:VLAN, 2:RX Flow Control |
| 4: TX pause packet */ |
| |
| |
| /* function declaration ------------------------------------- */ |
| static int dmfe_open(struct DEVICE *); |
| static netdev_tx_t dmfe_start_xmit(struct sk_buff *, struct DEVICE *); |
| static int dmfe_stop(struct DEVICE *); |
| static void dmfe_set_filter_mode(struct DEVICE *); |
| static const struct ethtool_ops netdev_ethtool_ops; |
| static u16 read_srom_word(long ,int); |
| static irqreturn_t dmfe_interrupt(int , void *); |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static void poll_dmfe (struct net_device *dev); |
| #endif |
| static void dmfe_descriptor_init(struct dmfe_board_info *, unsigned long); |
| static void allocate_rx_buffer(struct dmfe_board_info *); |
| static void update_cr6(u32, unsigned long); |
| static void send_filter_frame(struct DEVICE *); |
| static void dm9132_id_table(struct DEVICE *); |
| static u16 phy_read(unsigned long, u8, u8, u32); |
| static void phy_write(unsigned long, u8, u8, u16, u32); |
| static void phy_write_1bit(unsigned long, u32); |
| static u16 phy_read_1bit(unsigned long); |
| static u8 dmfe_sense_speed(struct dmfe_board_info *); |
| static void dmfe_process_mode(struct dmfe_board_info *); |
| static void dmfe_timer(unsigned long); |
| static inline u32 cal_CRC(unsigned char *, unsigned int, u8); |
| static void dmfe_rx_packet(struct DEVICE *, struct dmfe_board_info *); |
| static void dmfe_free_tx_pkt(struct DEVICE *, struct dmfe_board_info *); |
| static void dmfe_reuse_skb(struct dmfe_board_info *, struct sk_buff *); |
| static void dmfe_dynamic_reset(struct DEVICE *); |
| static void dmfe_free_rxbuffer(struct dmfe_board_info *); |
| static void dmfe_init_dm910x(struct DEVICE *); |
| static void dmfe_parse_srom(struct dmfe_board_info *); |
| static void dmfe_program_DM9801(struct dmfe_board_info *, int); |
| static void dmfe_program_DM9802(struct dmfe_board_info *); |
| static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * ); |
| static void dmfe_set_phyxcer(struct dmfe_board_info *); |
| |
| /* DM910X network board routine ---------------------------- */ |
| |
| static const struct net_device_ops netdev_ops = { |
| .ndo_open = dmfe_open, |
| .ndo_stop = dmfe_stop, |
| .ndo_start_xmit = dmfe_start_xmit, |
| .ndo_set_multicast_list = dmfe_set_filter_mode, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = poll_dmfe, |
| #endif |
| }; |
| |
| /* |
| * Search DM910X board ,allocate space and register it |
| */ |
| |
| static int __devinit dmfe_init_one (struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct dmfe_board_info *db; /* board information structure */ |
| struct net_device *dev; |
| u32 pci_pmr; |
| int i, err; |
| |
| DMFE_DBUG(0, "dmfe_init_one()", 0); |
| |
| if (!printed_version++) |
| printk(version); |
| |
| /* |
| * SPARC on-board DM910x chips should be handled by the main |
| * tulip driver, except for early DM9100s. |
| */ |
| #ifdef CONFIG_TULIP_DM910X |
| if ((ent->driver_data == PCI_DM9100_ID && pdev->revision >= 0x30) || |
| ent->driver_data == PCI_DM9102_ID) { |
| struct device_node *dp = pci_device_to_OF_node(pdev); |
| |
| if (dp && of_get_property(dp, "local-mac-address", NULL)) { |
| pr_info("skipping on-board DM910x (use tulip)\n"); |
| return -ENODEV; |
| } |
| } |
| #endif |
| |
| /* Init network device */ |
| dev = alloc_etherdev(sizeof(*db)); |
| if (dev == NULL) |
| return -ENOMEM; |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { |
| pr_warning("32-bit PCI DMA not available\n"); |
| err = -ENODEV; |
| goto err_out_free; |
| } |
| |
| /* Enable Master/IO access, Disable memory access */ |
| err = pci_enable_device(pdev); |
| if (err) |
| goto err_out_free; |
| |
| if (!pci_resource_start(pdev, 0)) { |
| pr_err("I/O base is zero\n"); |
| err = -ENODEV; |
| goto err_out_disable; |
| } |
| |
| if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) { |
| pr_err("Allocated I/O size too small\n"); |
| err = -ENODEV; |
| goto err_out_disable; |
| } |
| |
| #if 0 /* pci_{enable_device,set_master} sets minimum latency for us now */ |
| |
| /* Set Latency Timer 80h */ |
| /* FIXME: setting values > 32 breaks some SiS 559x stuff. |
| Need a PCI quirk.. */ |
| |
| pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x80); |
| #endif |
| |
| if (pci_request_regions(pdev, DRV_NAME)) { |
| pr_err("Failed to request PCI regions\n"); |
| err = -ENODEV; |
| goto err_out_disable; |
| } |
| |
| /* Init system & device */ |
| db = netdev_priv(dev); |
| |
| /* Allocate Tx/Rx descriptor memory */ |
| db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * |
| DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr); |
| if (!db->desc_pool_ptr) |
| goto err_out_res; |
| |
| db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * |
| TX_DESC_CNT + 4, &db->buf_pool_dma_ptr); |
| if (!db->buf_pool_ptr) |
| goto err_out_free_desc; |
| |
| db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr; |
| db->first_tx_desc_dma = db->desc_pool_dma_ptr; |
| db->buf_pool_start = db->buf_pool_ptr; |
| db->buf_pool_dma_start = db->buf_pool_dma_ptr; |
| |
| db->chip_id = ent->driver_data; |
| db->ioaddr = pci_resource_start(pdev, 0); |
| db->chip_revision = pdev->revision; |
| db->wol_mode = 0; |
| |
| db->pdev = pdev; |
| |
| dev->base_addr = db->ioaddr; |
| dev->irq = pdev->irq; |
| pci_set_drvdata(pdev, dev); |
| dev->netdev_ops = &netdev_ops; |
| dev->ethtool_ops = &netdev_ethtool_ops; |
| netif_carrier_off(dev); |
| spin_lock_init(&db->lock); |
| |
| pci_read_config_dword(pdev, 0x50, &pci_pmr); |
| pci_pmr &= 0x70000; |
| if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) ) |
| db->chip_type = 1; /* DM9102A E3 */ |
| else |
| db->chip_type = 0; |
| |
| /* read 64 word srom data */ |
| for (i = 0; i < 64; i++) |
| ((__le16 *) db->srom)[i] = |
| cpu_to_le16(read_srom_word(db->ioaddr, i)); |
| |
| /* Set Node address */ |
| for (i = 0; i < 6; i++) |
| dev->dev_addr[i] = db->srom[20 + i]; |
| |
| err = register_netdev (dev); |
| if (err) |
| goto err_out_free_buf; |
| |
| dev_info(&dev->dev, "Davicom DM%04lx at pci%s, %pM, irq %d\n", |
| ent->driver_data >> 16, |
| pci_name(pdev), dev->dev_addr, dev->irq); |
| |
| pci_set_master(pdev); |
| |
| return 0; |
| |
| err_out_free_buf: |
| pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, |
| db->buf_pool_ptr, db->buf_pool_dma_ptr); |
| err_out_free_desc: |
| pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, |
| db->desc_pool_ptr, db->desc_pool_dma_ptr); |
| err_out_res: |
| pci_release_regions(pdev); |
| err_out_disable: |
| pci_disable_device(pdev); |
| err_out_free: |
| pci_set_drvdata(pdev, NULL); |
| free_netdev(dev); |
| |
| return err; |
| } |
| |
| |
| static void __devexit dmfe_remove_one (struct pci_dev *pdev) |
| { |
| struct net_device *dev = pci_get_drvdata(pdev); |
| struct dmfe_board_info *db = netdev_priv(dev); |
| |
| DMFE_DBUG(0, "dmfe_remove_one()", 0); |
| |
| if (dev) { |
| |
| unregister_netdev(dev); |
| |
| pci_free_consistent(db->pdev, sizeof(struct tx_desc) * |
| DESC_ALL_CNT + 0x20, db->desc_pool_ptr, |
| db->desc_pool_dma_ptr); |
| pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, |
| db->buf_pool_ptr, db->buf_pool_dma_ptr); |
| pci_release_regions(pdev); |
| free_netdev(dev); /* free board information */ |
| |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| DMFE_DBUG(0, "dmfe_remove_one() exit", 0); |
| } |
| |
| |
| /* |
| * Open the interface. |
| * The interface is opened whenever "ifconfig" actives it. |
| */ |
| |
| static int dmfe_open(struct DEVICE *dev) |
| { |
| int ret; |
| struct dmfe_board_info *db = netdev_priv(dev); |
| |
| DMFE_DBUG(0, "dmfe_open", 0); |
| |
| ret = request_irq(dev->irq, dmfe_interrupt, |
| IRQF_SHARED, dev->name, dev); |
| if (ret) |
| return ret; |
| |
| /* system variable init */ |
| db->cr6_data = CR6_DEFAULT | dmfe_cr6_user_set; |
| db->tx_packet_cnt = 0; |
| db->tx_queue_cnt = 0; |
| db->rx_avail_cnt = 0; |
| db->wait_reset = 0; |
| |
| db->first_in_callback = 0; |
| db->NIC_capability = 0xf; /* All capability*/ |
| db->PHY_reg4 = 0x1e0; |
| |
| /* CR6 operation mode decision */ |
| if ( !chkmode || (db->chip_id == PCI_DM9132_ID) || |
| (db->chip_revision >= 0x30) ) { |
| db->cr6_data |= DMFE_TXTH_256; |
| db->cr0_data = CR0_DEFAULT; |
| db->dm910x_chk_mode=4; /* Enter the normal mode */ |
| } else { |
| db->cr6_data |= CR6_SFT; /* Store & Forward mode */ |
| db->cr0_data = 0; |
| db->dm910x_chk_mode = 1; /* Enter the check mode */ |
| } |
| |
| /* Initialize DM910X board */ |
| dmfe_init_dm910x(dev); |
| |
| /* Active System Interface */ |
| netif_wake_queue(dev); |
| |
| /* set and active a timer process */ |
| init_timer(&db->timer); |
| db->timer.expires = DMFE_TIMER_WUT + HZ * 2; |
| db->timer.data = (unsigned long)dev; |
| db->timer.function = dmfe_timer; |
| add_timer(&db->timer); |
| |
| return 0; |
| } |
| |
| |
| /* Initialize DM910X board |
| * Reset DM910X board |
| * Initialize TX/Rx descriptor chain structure |
| * Send the set-up frame |
| * Enable Tx/Rx machine |
| */ |
| |
| static void dmfe_init_dm910x(struct DEVICE *dev) |
| { |
| struct dmfe_board_info *db = netdev_priv(dev); |
| unsigned long ioaddr = db->ioaddr; |
| |
| DMFE_DBUG(0, "dmfe_init_dm910x()", 0); |
| |
| /* Reset DM910x MAC controller */ |
| outl(DM910X_RESET, ioaddr + DCR0); /* RESET MAC */ |
| udelay(100); |
| outl(db->cr0_data, ioaddr + DCR0); |
| udelay(5); |
| |
| /* Phy addr : DM910(A)2/DM9132/9801, phy address = 1 */ |
| db->phy_addr = 1; |
| |
| /* Parser SROM and media mode */ |
| dmfe_parse_srom(db); |
| db->media_mode = dmfe_media_mode; |
| |
| /* RESET Phyxcer Chip by GPR port bit 7 */ |
| outl(0x180, ioaddr + DCR12); /* Let bit 7 output port */ |
| if (db->chip_id == PCI_DM9009_ID) { |
| outl(0x80, ioaddr + DCR12); /* Issue RESET signal */ |
| mdelay(300); /* Delay 300 ms */ |
| } |
| outl(0x0, ioaddr + DCR12); /* Clear RESET signal */ |
| |
| /* Process Phyxcer Media Mode */ |
| if ( !(db->media_mode & 0x10) ) /* Force 1M mode */ |
| dmfe_set_phyxcer(db); |
| |
| /* Media Mode Process */ |
| if ( !(db->media_mode & DMFE_AUTO) ) |
| db->op_mode = db->media_mode; /* Force Mode */ |
| |
| /* Initialize Transmit/Receive decriptor and CR3/4 */ |
| dmfe_descriptor_init(db, ioaddr); |
| |
| /* Init CR6 to program DM910x operation */ |
| update_cr6(db->cr6_data, ioaddr); |
| |
| /* Send setup frame */ |
| if (db->chip_id == PCI_DM9132_ID) |
| dm9132_id_table(dev); /* DM9132 */ |
| else |
| send_filter_frame(dev); /* DM9102/DM9102A */ |
| |
| /* Init CR7, interrupt active bit */ |
| db->cr7_data = CR7_DEFAULT; |
| outl(db->cr7_data, ioaddr + DCR7); |
| |
| /* Init CR15, Tx jabber and Rx watchdog timer */ |
| outl(db->cr15_data, ioaddr + DCR15); |
| |
| /* Enable DM910X Tx/Rx function */ |
| db->cr6_data |= CR6_RXSC | CR6_TXSC | 0x40000; |
| update_cr6(db->cr6_data, ioaddr); |
| } |
| |
| |
| /* |
| * Hardware start transmission. |
| * Send a packet to media from the upper layer. |
| */ |
| |
| static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb, |
| struct DEVICE *dev) |
| { |
| struct dmfe_board_info *db = netdev_priv(dev); |
| struct tx_desc *txptr; |
| unsigned long flags; |
| |
| DMFE_DBUG(0, "dmfe_start_xmit", 0); |
| |
| /* Too large packet check */ |
| if (skb->len > MAX_PACKET_SIZE) { |
| pr_err("big packet = %d\n", (u16)skb->len); |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /* Resource flag check */ |
| netif_stop_queue(dev); |
| |
| spin_lock_irqsave(&db->lock, flags); |
| |
| /* No Tx resource check, it never happen nromally */ |
| if (db->tx_queue_cnt >= TX_FREE_DESC_CNT) { |
| spin_unlock_irqrestore(&db->lock, flags); |
| pr_err("No Tx resource %ld\n", db->tx_queue_cnt); |
| return NETDEV_TX_BUSY; |
| } |
| |
| /* Disable NIC interrupt */ |
| outl(0, dev->base_addr + DCR7); |
| |
| /* transmit this packet */ |
| txptr = db->tx_insert_ptr; |
| skb_copy_from_linear_data(skb, txptr->tx_buf_ptr, skb->len); |
| txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len); |
| |
| /* Point to next transmit free descriptor */ |
| db->tx_insert_ptr = txptr->next_tx_desc; |
| |
| /* Transmit Packet Process */ |
| if ( (!db->tx_queue_cnt) && (db->tx_packet_cnt < TX_MAX_SEND_CNT) ) { |
| txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ |
| db->tx_packet_cnt++; /* Ready to send */ |
| outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ |
| dev->trans_start = jiffies; /* saved time stamp */ |
| } else { |
| db->tx_queue_cnt++; /* queue TX packet */ |
| outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ |
| } |
| |
| /* Tx resource check */ |
| if ( db->tx_queue_cnt < TX_FREE_DESC_CNT ) |
| netif_wake_queue(dev); |
| |
| /* Restore CR7 to enable interrupt */ |
| spin_unlock_irqrestore(&db->lock, flags); |
| outl(db->cr7_data, dev->base_addr + DCR7); |
| |
| /* free this SKB */ |
| dev_kfree_skb(skb); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| |
| /* |
| * Stop the interface. |
| * The interface is stopped when it is brought. |
| */ |
| |
| static int dmfe_stop(struct DEVICE *dev) |
| { |
| struct dmfe_board_info *db = netdev_priv(dev); |
| unsigned long ioaddr = dev->base_addr; |
| |
| DMFE_DBUG(0, "dmfe_stop", 0); |
| |
| /* disable system */ |
| netif_stop_queue(dev); |
| |
| /* deleted timer */ |
| del_timer_sync(&db->timer); |
| |
| /* Reset & stop DM910X board */ |
| outl(DM910X_RESET, ioaddr + DCR0); |
| udelay(5); |
| phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id); |
| |
| /* free interrupt */ |
| free_irq(dev->irq, dev); |
| |
| /* free allocated rx buffer */ |
| dmfe_free_rxbuffer(db); |
| |
| #if 0 |
| /* show statistic counter */ |
| printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n", |
| db->tx_fifo_underrun, db->tx_excessive_collision, |
| db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, |
| db->tx_jabber_timeout, db->reset_count, db->reset_cr8, |
| db->reset_fatal, db->reset_TXtimeout); |
| #endif |
| |
| return 0; |
| } |
| |
| |
| /* |
| * DM9102 insterrupt handler |
| * receive the packet to upper layer, free the transmitted packet |
| */ |
| |
| static irqreturn_t dmfe_interrupt(int irq, void *dev_id) |
| { |
| struct DEVICE *dev = dev_id; |
| struct dmfe_board_info *db = netdev_priv(dev); |
| unsigned long ioaddr = dev->base_addr; |
| unsigned long flags; |
| |
| DMFE_DBUG(0, "dmfe_interrupt()", 0); |
| |
| spin_lock_irqsave(&db->lock, flags); |
| |
| /* Got DM910X status */ |
| db->cr5_data = inl(ioaddr + DCR5); |
| outl(db->cr5_data, ioaddr + DCR5); |
| if ( !(db->cr5_data & 0xc1) ) { |
| spin_unlock_irqrestore(&db->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| /* Disable all interrupt in CR7 to solve the interrupt edge problem */ |
| outl(0, ioaddr + DCR7); |
| |
| /* Check system status */ |
| if (db->cr5_data & 0x2000) { |
| /* system bus error happen */ |
| DMFE_DBUG(1, "System bus error happen. CR5=", db->cr5_data); |
| db->reset_fatal++; |
| db->wait_reset = 1; /* Need to RESET */ |
| spin_unlock_irqrestore(&db->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| /* Received the coming packet */ |
| if ( (db->cr5_data & 0x40) && db->rx_avail_cnt ) |
| dmfe_rx_packet(dev, db); |
| |
| /* reallocate rx descriptor buffer */ |
| if (db->rx_avail_cnt<RX_DESC_CNT) |
| allocate_rx_buffer(db); |
| |
| /* Free the transmitted descriptor */ |
| if ( db->cr5_data & 0x01) |
| dmfe_free_tx_pkt(dev, db); |
| |
| /* Mode Check */ |
| if (db->dm910x_chk_mode & 0x2) { |
| db->dm910x_chk_mode = 0x4; |
| db->cr6_data |= 0x100; |
| update_cr6(db->cr6_data, db->ioaddr); |
| } |
| |
| /* Restore CR7 to enable interrupt mask */ |
| outl(db->cr7_data, ioaddr + DCR7); |
| |
| spin_unlock_irqrestore(&db->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /* |
| * Polling 'interrupt' - used by things like netconsole to send skbs |
| * without having to re-enable interrupts. It's not called while |
| * the interrupt routine is executing. |
| */ |
| |
| static void poll_dmfe (struct net_device *dev) |
| { |
| /* disable_irq here is not very nice, but with the lockless |
| interrupt handler we have no other choice. */ |
| disable_irq(dev->irq); |
| dmfe_interrupt (dev->irq, dev); |
| enable_irq(dev->irq); |
| } |
| #endif |
| |
| /* |
| * Free TX resource after TX complete |
| */ |
| |
| static void dmfe_free_tx_pkt(struct DEVICE *dev, struct dmfe_board_info * db) |
| { |
| struct tx_desc *txptr; |
| unsigned long ioaddr = dev->base_addr; |
| u32 tdes0; |
| |
| txptr = db->tx_remove_ptr; |
| while(db->tx_packet_cnt) { |
| tdes0 = le32_to_cpu(txptr->tdes0); |
| pr_debug("tdes0=%x\n", tdes0); |
| if (tdes0 & 0x80000000) |
| break; |
| |
| /* A packet sent completed */ |
| db->tx_packet_cnt--; |
| dev->stats.tx_packets++; |
| |
| /* Transmit statistic counter */ |
| if ( tdes0 != 0x7fffffff ) { |
| pr_debug("tdes0=%x\n", tdes0); |
| dev->stats.collisions += (tdes0 >> 3) & 0xf; |
| dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff; |
| if (tdes0 & TDES0_ERR_MASK) { |
| dev->stats.tx_errors++; |
| |
| if (tdes0 & 0x0002) { /* UnderRun */ |
| db->tx_fifo_underrun++; |
| if ( !(db->cr6_data & CR6_SFT) ) { |
| db->cr6_data = db->cr6_data | CR6_SFT; |
| update_cr6(db->cr6_data, db->ioaddr); |
| } |
| } |
| if (tdes0 & 0x0100) |
| db->tx_excessive_collision++; |
| if (tdes0 & 0x0200) |
| db->tx_late_collision++; |
| if (tdes0 & 0x0400) |
| db->tx_no_carrier++; |
| if (tdes0 & 0x0800) |
| db->tx_loss_carrier++; |
| if (tdes0 & 0x4000) |
| db->tx_jabber_timeout++; |
| } |
| } |
| |
| txptr = txptr->next_tx_desc; |
| }/* End of while */ |
| |
| /* Update TX remove pointer to next */ |
| db->tx_remove_ptr = txptr; |
| |
| /* Send the Tx packet in queue */ |
| if ( (db->tx_packet_cnt < TX_MAX_SEND_CNT) && db->tx_queue_cnt ) { |
| txptr->tdes0 = cpu_to_le32(0x80000000); /* Set owner bit */ |
| db->tx_packet_cnt++; /* Ready to send */ |
| db->tx_queue_cnt--; |
| outl(0x1, ioaddr + DCR1); /* Issue Tx polling */ |
| dev->trans_start = jiffies; /* saved time stamp */ |
| } |
| |
| /* Resource available check */ |
| if ( db->tx_queue_cnt < TX_WAKE_DESC_CNT ) |
| netif_wake_queue(dev); /* Active upper layer, send again */ |
| } |
| |
| |
| /* |
| * Calculate the CRC valude of the Rx packet |
| * flag = 1 : return the reverse CRC (for the received packet CRC) |
| * 0 : return the normal CRC (for Hash Table index) |
| */ |
| |
| static inline u32 cal_CRC(unsigned char * Data, unsigned int Len, u8 flag) |
| { |
| u32 crc = crc32(~0, Data, Len); |
| if (flag) crc = ~crc; |
| return crc; |
| } |
| |
| |
| /* |
| * Receive the come packet and pass to upper layer |
| */ |
| |
| static void dmfe_rx_packet(struct DEVICE *dev, struct dmfe_board_info * db) |
| { |
| struct rx_desc *rxptr; |
| struct sk_buff *skb, *newskb; |
| int rxlen; |
| u32 rdes0; |
| |
| rxptr = db->rx_ready_ptr; |
| |
| while(db->rx_avail_cnt) { |
| rdes0 = le32_to_cpu(rxptr->rdes0); |
| if (rdes0 & 0x80000000) /* packet owner check */ |
| break; |
| |
| db->rx_avail_cnt--; |
| db->interval_rx_cnt++; |
| |
| pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), |
| RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE); |
| |
| if ( (rdes0 & 0x300) != 0x300) { |
| /* A packet without First/Last flag */ |
| /* reuse this SKB */ |
| DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); |
| dmfe_reuse_skb(db, rxptr->rx_skb_ptr); |
| } else { |
| /* A packet with First/Last flag */ |
| rxlen = ( (rdes0 >> 16) & 0x3fff) - 4; |
| |
| /* error summary bit check */ |
| if (rdes0 & 0x8000) { |
| /* This is a error packet */ |
| pr_debug("rdes0: %x\n", rdes0); |
| dev->stats.rx_errors++; |
| if (rdes0 & 1) |
| dev->stats.rx_fifo_errors++; |
| if (rdes0 & 2) |
| dev->stats.rx_crc_errors++; |
| if (rdes0 & 0x80) |
| dev->stats.rx_length_errors++; |
| } |
| |
| if ( !(rdes0 & 0x8000) || |
| ((db->cr6_data & CR6_PM) && (rxlen>6)) ) { |
| skb = rxptr->rx_skb_ptr; |
| |
| /* Received Packet CRC check need or not */ |
| if ( (db->dm910x_chk_mode & 1) && |
| (cal_CRC(skb->data, rxlen, 1) != |
| (*(u32 *) (skb->data+rxlen) ))) { /* FIXME (?) */ |
| /* Found a error received packet */ |
| dmfe_reuse_skb(db, rxptr->rx_skb_ptr); |
| db->dm910x_chk_mode = 3; |
| } else { |
| /* Good packet, send to upper layer */ |
| /* Shorst packet used new SKB */ |
| if ((rxlen < RX_COPY_SIZE) && |
| ((newskb = dev_alloc_skb(rxlen + 2)) |
| != NULL)) { |
| |
| skb = newskb; |
| /* size less than COPY_SIZE, allocate a rxlen SKB */ |
| skb_reserve(skb, 2); /* 16byte align */ |
| skb_copy_from_linear_data(rxptr->rx_skb_ptr, |
| skb_put(skb, rxlen), |
| rxlen); |
| dmfe_reuse_skb(db, rxptr->rx_skb_ptr); |
| } else |
| skb_put(skb, rxlen); |
| |
| skb->protocol = eth_type_trans(skb, dev); |
| netif_rx(skb); |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += rxlen; |
| } |
| } else { |
| /* Reuse SKB buffer when the packet is error */ |
| DMFE_DBUG(0, "Reuse SK buffer, rdes0", rdes0); |
| dmfe_reuse_skb(db, rxptr->rx_skb_ptr); |
| } |
| } |
| |
| rxptr = rxptr->next_rx_desc; |
| } |
| |
| db->rx_ready_ptr = rxptr; |
| } |
| |
| /* |
| * Set DM910X multicast address |
| */ |
| |
| static void dmfe_set_filter_mode(struct DEVICE * dev) |
| { |
| struct dmfe_board_info *db = netdev_priv(dev); |
| unsigned long flags; |
| int mc_count = netdev_mc_count(dev); |
| |
| DMFE_DBUG(0, "dmfe_set_filter_mode()", 0); |
| spin_lock_irqsave(&db->lock, flags); |
| |
| if (dev->flags & IFF_PROMISC) { |
| DMFE_DBUG(0, "Enable PROM Mode", 0); |
| db->cr6_data |= CR6_PM | CR6_PBF; |
| update_cr6(db->cr6_data, db->ioaddr); |
| spin_unlock_irqrestore(&db->lock, flags); |
| return; |
| } |
| |
| if (dev->flags & IFF_ALLMULTI || mc_count > DMFE_MAX_MULTICAST) { |
| DMFE_DBUG(0, "Pass all multicast address", mc_count); |
| db->cr6_data &= ~(CR6_PM | CR6_PBF); |
| db->cr6_data |= CR6_PAM; |
| spin_unlock_irqrestore(&db->lock, flags); |
| return; |
| } |
| |
| DMFE_DBUG(0, "Set multicast address", mc_count); |
| if (db->chip_id == PCI_DM9132_ID) |
| dm9132_id_table(dev); /* DM9132 */ |
| else |
| send_filter_frame(dev); /* DM9102/DM9102A */ |
| spin_unlock_irqrestore(&db->lock, flags); |
| } |
| |
| /* |
| * Ethtool interace |
| */ |
| |
| static void dmfe_ethtool_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| struct dmfe_board_info *np = netdev_priv(dev); |
| |
| strcpy(info->driver, DRV_NAME); |
| strcpy(info->version, DRV_VERSION); |
| if (np->pdev) |
| strcpy(info->bus_info, pci_name(np->pdev)); |
| else |
| sprintf(info->bus_info, "EISA 0x%lx %d", |
| dev->base_addr, dev->irq); |
| } |
| |
| static int dmfe_ethtool_set_wol(struct net_device *dev, |
| struct ethtool_wolinfo *wolinfo) |
| { |
| struct dmfe_board_info *db = netdev_priv(dev); |
| |
| if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | |
| WAKE_ARP | WAKE_MAGICSECURE)) |
| return -EOPNOTSUPP; |
| |
| db->wol_mode = wolinfo->wolopts; |
| return 0; |
| } |
| |
| static void dmfe_ethtool_get_wol(struct net_device *dev, |
| struct ethtool_wolinfo *wolinfo) |
| { |
| struct dmfe_board_info *db = netdev_priv(dev); |
| |
| wolinfo->supported = WAKE_PHY | WAKE_MAGIC; |
| wolinfo->wolopts = db->wol_mode; |
| } |
| |
| |
| static const struct ethtool_ops netdev_ethtool_ops = { |
| .get_drvinfo = dmfe_ethtool_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| .set_wol = dmfe_ethtool_set_wol, |
| .get_wol = dmfe_ethtool_get_wol, |
| }; |
| |
| /* |
| * A periodic timer routine |
| * Dynamic media sense, allocate Rx buffer... |
| */ |
| |
| static void dmfe_timer(unsigned long data) |
| { |
| u32 tmp_cr8; |
| unsigned char tmp_cr12; |
| struct DEVICE *dev = (struct DEVICE *) data; |
| struct dmfe_board_info *db = netdev_priv(dev); |
| unsigned long flags; |
| |
| int link_ok, link_ok_phy; |
| |
| DMFE_DBUG(0, "dmfe_timer()", 0); |
| spin_lock_irqsave(&db->lock, flags); |
| |
| /* Media mode process when Link OK before enter this route */ |
| if (db->first_in_callback == 0) { |
| db->first_in_callback = 1; |
| if (db->chip_type && (db->chip_id==PCI_DM9102_ID)) { |
| db->cr6_data &= ~0x40000; |
| update_cr6(db->cr6_data, db->ioaddr); |
| phy_write(db->ioaddr, |
| db->phy_addr, 0, 0x1000, db->chip_id); |
| db->cr6_data |= 0x40000; |
| update_cr6(db->cr6_data, db->ioaddr); |
| db->timer.expires = DMFE_TIMER_WUT + HZ * 2; |
| add_timer(&db->timer); |
| spin_unlock_irqrestore(&db->lock, flags); |
| return; |
| } |
| } |
| |
| |
| /* Operating Mode Check */ |
| if ( (db->dm910x_chk_mode & 0x1) && |
| (dev->stats.rx_packets > MAX_CHECK_PACKET) ) |
| db->dm910x_chk_mode = 0x4; |
| |
| /* Dynamic reset DM910X : system error or transmit time-out */ |
| tmp_cr8 = inl(db->ioaddr + DCR8); |
| if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) { |
| db->reset_cr8++; |
| db->wait_reset = 1; |
| } |
| db->interval_rx_cnt = 0; |
| |
| /* TX polling kick monitor */ |
| if ( db->tx_packet_cnt && |
| time_after(jiffies, dev_trans_start(dev) + DMFE_TX_KICK) ) { |
| outl(0x1, dev->base_addr + DCR1); /* Tx polling again */ |
| |
| /* TX Timeout */ |
| if (time_after(jiffies, dev_trans_start(dev) + DMFE_TX_TIMEOUT) ) { |
| db->reset_TXtimeout++; |
| db->wait_reset = 1; |
| dev_warn(&dev->dev, "Tx timeout - resetting\n"); |
| } |
| } |
| |
| if (db->wait_reset) { |
| DMFE_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt); |
| db->reset_count++; |
| dmfe_dynamic_reset(dev); |
| db->first_in_callback = 0; |
| db->timer.expires = DMFE_TIMER_WUT; |
| add_timer(&db->timer); |
| spin_unlock_irqrestore(&db->lock, flags); |
| return; |
| } |
| |
| /* Link status check, Dynamic media type change */ |
| if (db->chip_id == PCI_DM9132_ID) |
| tmp_cr12 = inb(db->ioaddr + DCR9 + 3); /* DM9132 */ |
| else |
| tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */ |
| |
| if ( ((db->chip_id == PCI_DM9102_ID) && |
| (db->chip_revision == 0x30)) || |
| ((db->chip_id == PCI_DM9132_ID) && |
| (db->chip_revision == 0x10)) ) { |
| /* DM9102A Chip */ |
| if (tmp_cr12 & 2) |
| link_ok = 0; |
| else |
| link_ok = 1; |
| } |
| else |
| /*0x43 is used instead of 0x3 because bit 6 should represent |
| link status of external PHY */ |
| link_ok = (tmp_cr12 & 0x43) ? 1 : 0; |
| |
| |
| /* If chip reports that link is failed it could be because external |
| PHY link status pin is not connected correctly to chip |
| To be sure ask PHY too. |
| */ |
| |
| /* need a dummy read because of PHY's register latch*/ |
| phy_read (db->ioaddr, db->phy_addr, 1, db->chip_id); |
| link_ok_phy = (phy_read (db->ioaddr, |
| db->phy_addr, 1, db->chip_id) & 0x4) ? 1 : 0; |
| |
| if (link_ok_phy != link_ok) { |
| DMFE_DBUG (0, "PHY and chip report different link status", 0); |
| link_ok = link_ok | link_ok_phy; |
| } |
| |
| if ( !link_ok && netif_carrier_ok(dev)) { |
| /* Link Failed */ |
| DMFE_DBUG(0, "Link Failed", tmp_cr12); |
| netif_carrier_off(dev); |
| |
| /* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */ |
| /* AUTO or force 1M Homerun/Longrun don't need */ |
| if ( !(db->media_mode & 0x38) ) |
| phy_write(db->ioaddr, db->phy_addr, |
| 0, 0x1000, db->chip_id); |
| |
| /* AUTO mode, if INT phyxcer link failed, select EXT device */ |
| if (db->media_mode & DMFE_AUTO) { |
| /* 10/100M link failed, used 1M Home-Net */ |
| db->cr6_data|=0x00040000; /* bit18=1, MII */ |
| db->cr6_data&=~0x00000200; /* bit9=0, HD mode */ |
| update_cr6(db->cr6_data, db->ioaddr); |
| } |
| } else if (!netif_carrier_ok(dev)) { |
| |
| DMFE_DBUG(0, "Link link OK", tmp_cr12); |
| |
| /* Auto Sense Speed */ |
| if ( !(db->media_mode & DMFE_AUTO) || !dmfe_sense_speed(db)) { |
| netif_carrier_on(dev); |
| SHOW_MEDIA_TYPE(db->op_mode); |
| } |
| |
| dmfe_process_mode(db); |
| } |
| |
| /* HPNA remote command check */ |
| if (db->HPNA_command & 0xf00) { |
| db->HPNA_timer--; |
| if (!db->HPNA_timer) |
| dmfe_HPNA_remote_cmd_chk(db); |
| } |
| |
| /* Timer active again */ |
| db->timer.expires = DMFE_TIMER_WUT; |
| add_timer(&db->timer); |
| spin_unlock_irqrestore(&db->lock, flags); |
| } |
| |
| |
| /* |
| * Dynamic reset the DM910X board |
| * Stop DM910X board |
| * Free Tx/Rx allocated memory |
| * Reset DM910X board |
| * Re-initialize DM910X board |
| */ |
| |
| static void dmfe_dynamic_reset(struct DEVICE *dev) |
| { |
| struct dmfe_board_info *db = netdev_priv(dev); |
| |
| DMFE_DBUG(0, "dmfe_dynamic_reset()", 0); |
| |
| /* Sopt MAC controller */ |
| db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */ |
| update_cr6(db->cr6_data, dev->base_addr); |
| outl(0, dev->base_addr + DCR7); /* Disable Interrupt */ |
| outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5); |
| |
| /* Disable upper layer interface */ |
| netif_stop_queue(dev); |
| |
| /* Free Rx Allocate buffer */ |
| dmfe_free_rxbuffer(db); |
| |
| /* system variable init */ |
| db->tx_packet_cnt = 0; |
| db->tx_queue_cnt = 0; |
| db->rx_avail_cnt = 0; |
| netif_carrier_off(dev); |
| db->wait_reset = 0; |
| |
| /* Re-initialize DM910X board */ |
| dmfe_init_dm910x(dev); |
| |
| /* Restart upper layer interface */ |
| netif_wake_queue(dev); |
| } |
| |
| |
| /* |
| * free all allocated rx buffer |
| */ |
| |
| static void dmfe_free_rxbuffer(struct dmfe_board_info * db) |
| { |
| DMFE_DBUG(0, "dmfe_free_rxbuffer()", 0); |
| |
| /* free allocated rx buffer */ |
| while (db->rx_avail_cnt) { |
| dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr); |
| db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc; |
| db->rx_avail_cnt--; |
| } |
| } |
| |
| |
| /* |
| * Reuse the SK buffer |
| */ |
| |
| static void dmfe_reuse_skb(struct dmfe_board_info *db, struct sk_buff * skb) |
| { |
| struct rx_desc *rxptr = db->rx_insert_ptr; |
| |
| if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) { |
| rxptr->rx_skb_ptr = skb; |
| rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, |
| skb->data, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); |
| wmb(); |
| rxptr->rdes0 = cpu_to_le32(0x80000000); |
| db->rx_avail_cnt++; |
| db->rx_insert_ptr = rxptr->next_rx_desc; |
| } else |
| DMFE_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt); |
| } |
| |
| |
| /* |
| * Initialize transmit/Receive descriptor |
| * Using Chain structure, and allocate Tx/Rx buffer |
| */ |
| |
| static void dmfe_descriptor_init(struct dmfe_board_info *db, unsigned long ioaddr) |
| { |
| struct tx_desc *tmp_tx; |
| struct rx_desc *tmp_rx; |
| unsigned char *tmp_buf; |
| dma_addr_t tmp_tx_dma, tmp_rx_dma; |
| dma_addr_t tmp_buf_dma; |
| int i; |
| |
| DMFE_DBUG(0, "dmfe_descriptor_init()", 0); |
| |
| /* tx descriptor start pointer */ |
| db->tx_insert_ptr = db->first_tx_desc; |
| db->tx_remove_ptr = db->first_tx_desc; |
| outl(db->first_tx_desc_dma, ioaddr + DCR4); /* TX DESC address */ |
| |
| /* rx descriptor start pointer */ |
| db->first_rx_desc = (void *)db->first_tx_desc + |
| sizeof(struct tx_desc) * TX_DESC_CNT; |
| |
| db->first_rx_desc_dma = db->first_tx_desc_dma + |
| sizeof(struct tx_desc) * TX_DESC_CNT; |
| db->rx_insert_ptr = db->first_rx_desc; |
| db->rx_ready_ptr = db->first_rx_desc; |
| outl(db->first_rx_desc_dma, ioaddr + DCR3); /* RX DESC address */ |
| |
| /* Init Transmit chain */ |
| tmp_buf = db->buf_pool_start; |
| tmp_buf_dma = db->buf_pool_dma_start; |
| tmp_tx_dma = db->first_tx_desc_dma; |
| for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) { |
| tmp_tx->tx_buf_ptr = tmp_buf; |
| tmp_tx->tdes0 = cpu_to_le32(0); |
| tmp_tx->tdes1 = cpu_to_le32(0x81000000); /* IC, chain */ |
| tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma); |
| tmp_tx_dma += sizeof(struct tx_desc); |
| tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma); |
| tmp_tx->next_tx_desc = tmp_tx + 1; |
| tmp_buf = tmp_buf + TX_BUF_ALLOC; |
| tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC; |
| } |
| (--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma); |
| tmp_tx->next_tx_desc = db->first_tx_desc; |
| |
| /* Init Receive descriptor chain */ |
| tmp_rx_dma=db->first_rx_desc_dma; |
| for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) { |
| tmp_rx->rdes0 = cpu_to_le32(0); |
| tmp_rx->rdes1 = cpu_to_le32(0x01000600); |
| tmp_rx_dma += sizeof(struct rx_desc); |
| tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma); |
| tmp_rx->next_rx_desc = tmp_rx + 1; |
| } |
| (--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma); |
| tmp_rx->next_rx_desc = db->first_rx_desc; |
| |
| /* pre-allocate Rx buffer */ |
| allocate_rx_buffer(db); |
| } |
| |
| |
| /* |
| * Update CR6 value |
| * Firstly stop DM910X , then written value and start |
| */ |
| |
| static void update_cr6(u32 cr6_data, unsigned long ioaddr) |
| { |
| u32 cr6_tmp; |
| |
| cr6_tmp = cr6_data & ~0x2002; /* stop Tx/Rx */ |
| outl(cr6_tmp, ioaddr + DCR6); |
| udelay(5); |
| outl(cr6_data, ioaddr + DCR6); |
| udelay(5); |
| } |
| |
| |
| /* |
| * Send a setup frame for DM9132 |
| * This setup frame initialize DM910X address filter mode |
| */ |
| |
| static void dm9132_id_table(struct DEVICE *dev) |
| { |
| struct netdev_hw_addr *ha; |
| u16 * addrptr; |
| unsigned long ioaddr = dev->base_addr+0xc0; /* ID Table */ |
| u32 hash_val; |
| u16 i, hash_table[4]; |
| |
| DMFE_DBUG(0, "dm9132_id_table()", 0); |
| |
| /* Node address */ |
| addrptr = (u16 *) dev->dev_addr; |
| outw(addrptr[0], ioaddr); |
| ioaddr += 4; |
| outw(addrptr[1], ioaddr); |
| ioaddr += 4; |
| outw(addrptr[2], ioaddr); |
| ioaddr += 4; |
| |
| /* Clear Hash Table */ |
| memset(hash_table, 0, sizeof(hash_table)); |
| |
| /* broadcast address */ |
| hash_table[3] = 0x8000; |
| |
| /* the multicast address in Hash Table : 64 bits */ |
| netdev_for_each_mc_addr(ha, dev) { |
| hash_val = cal_CRC((char *) ha->addr, 6, 0) & 0x3f; |
| hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16); |
| } |
| |
| /* Write the hash table to MAC MD table */ |
| for (i = 0; i < 4; i++, ioaddr += 4) |
| outw(hash_table[i], ioaddr); |
| } |
| |
| |
| /* |
| * Send a setup frame for DM9102/DM9102A |
| * This setup frame initialize DM910X address filter mode |
| */ |
| |
| static void send_filter_frame(struct DEVICE *dev) |
| { |
| struct dmfe_board_info *db = netdev_priv(dev); |
| struct netdev_hw_addr *ha; |
| struct tx_desc *txptr; |
| u16 * addrptr; |
| u32 * suptr; |
| int i; |
| |
| DMFE_DBUG(0, "send_filter_frame()", 0); |
| |
| txptr = db->tx_insert_ptr; |
| suptr = (u32 *) txptr->tx_buf_ptr; |
| |
| /* Node address */ |
| addrptr = (u16 *) dev->dev_addr; |
| *suptr++ = addrptr[0]; |
| *suptr++ = addrptr[1]; |
| *suptr++ = addrptr[2]; |
| |
| /* broadcast address */ |
| *suptr++ = 0xffff; |
| *suptr++ = 0xffff; |
| *suptr++ = 0xffff; |
| |
| /* fit the multicast address */ |
| netdev_for_each_mc_addr(ha, dev) { |
| addrptr = (u16 *) ha->addr; |
| *suptr++ = addrptr[0]; |
| *suptr++ = addrptr[1]; |
| *suptr++ = addrptr[2]; |
| } |
| |
| for (i = netdev_mc_count(dev); i < 14; i++) { |
| *suptr++ = 0xffff; |
| *suptr++ = 0xffff; |
| *suptr++ = 0xffff; |
| } |
| |
| /* prepare the setup frame */ |
| db->tx_insert_ptr = txptr->next_tx_desc; |
| txptr->tdes1 = cpu_to_le32(0x890000c0); |
| |
| /* Resource Check and Send the setup packet */ |
| if (!db->tx_packet_cnt) { |
| /* Resource Empty */ |
| db->tx_packet_cnt++; |
| txptr->tdes0 = cpu_to_le32(0x80000000); |
| update_cr6(db->cr6_data | 0x2000, dev->base_addr); |
| outl(0x1, dev->base_addr + DCR1); /* Issue Tx polling */ |
| update_cr6(db->cr6_data, dev->base_addr); |
| dev->trans_start = jiffies; |
| } else |
| db->tx_queue_cnt++; /* Put in TX queue */ |
| } |
| |
| |
| /* |
| * Allocate rx buffer, |
| * As possible as allocate maxiumn Rx buffer |
| */ |
| |
| static void allocate_rx_buffer(struct dmfe_board_info *db) |
| { |
| struct rx_desc *rxptr; |
| struct sk_buff *skb; |
| |
| rxptr = db->rx_insert_ptr; |
| |
| while(db->rx_avail_cnt < RX_DESC_CNT) { |
| if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL ) |
| break; |
| rxptr->rx_skb_ptr = skb; /* FIXME (?) */ |
| rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->data, |
| RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) ); |
| wmb(); |
| rxptr->rdes0 = cpu_to_le32(0x80000000); |
| rxptr = rxptr->next_rx_desc; |
| db->rx_avail_cnt++; |
| } |
| |
| db->rx_insert_ptr = rxptr; |
| } |
| |
| |
| /* |
| * Read one word data from the serial ROM |
| */ |
| |
| static u16 read_srom_word(long ioaddr, int offset) |
| { |
| int i; |
| u16 srom_data = 0; |
| long cr9_ioaddr = ioaddr + DCR9; |
| |
| outl(CR9_SROM_READ, cr9_ioaddr); |
| outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); |
| |
| /* Send the Read Command 110b */ |
| SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); |
| SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr); |
| SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr); |
| |
| /* Send the offset */ |
| for (i = 5; i >= 0; i--) { |
| srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0; |
| SROM_CLK_WRITE(srom_data, cr9_ioaddr); |
| } |
| |
| outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); |
| |
| for (i = 16; i > 0; i--) { |
| outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr); |
| udelay(5); |
| srom_data = (srom_data << 1) | |
| ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0); |
| outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr); |
| udelay(5); |
| } |
| |
| outl(CR9_SROM_READ, cr9_ioaddr); |
| return srom_data; |
| } |
| |
| |
| /* |
| * Auto sense the media mode |
| */ |
| |
| static u8 dmfe_sense_speed(struct dmfe_board_info * db) |
| { |
| u8 ErrFlag = 0; |
| u16 phy_mode; |
| |
| /* CR6 bit18=0, select 10/100M */ |
| update_cr6( (db->cr6_data & ~0x40000), db->ioaddr); |
| |
| phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); |
| phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id); |
| |
| if ( (phy_mode & 0x24) == 0x24 ) { |
| if (db->chip_id == PCI_DM9132_ID) /* DM9132 */ |
| phy_mode = phy_read(db->ioaddr, |
| db->phy_addr, 7, db->chip_id) & 0xf000; |
| else /* DM9102/DM9102A */ |
| phy_mode = phy_read(db->ioaddr, |
| db->phy_addr, 17, db->chip_id) & 0xf000; |
| pr_debug("Phy_mode %x\n", phy_mode); |
| switch (phy_mode) { |
| case 0x1000: db->op_mode = DMFE_10MHF; break; |
| case 0x2000: db->op_mode = DMFE_10MFD; break; |
| case 0x4000: db->op_mode = DMFE_100MHF; break; |
| case 0x8000: db->op_mode = DMFE_100MFD; break; |
| default: db->op_mode = DMFE_10MHF; |
| ErrFlag = 1; |
| break; |
| } |
| } else { |
| db->op_mode = DMFE_10MHF; |
| DMFE_DBUG(0, "Link Failed :", phy_mode); |
| ErrFlag = 1; |
| } |
| |
| return ErrFlag; |
| } |
| |
| |
| /* |
| * Set 10/100 phyxcer capability |
| * AUTO mode : phyxcer register4 is NIC capability |
| * Force mode: phyxcer register4 is the force media |
| */ |
| |
| static void dmfe_set_phyxcer(struct dmfe_board_info *db) |
| { |
| u16 phy_reg; |
| |
| /* Select 10/100M phyxcer */ |
| db->cr6_data &= ~0x40000; |
| update_cr6(db->cr6_data, db->ioaddr); |
| |
| /* DM9009 Chip: Phyxcer reg18 bit12=0 */ |
| if (db->chip_id == PCI_DM9009_ID) { |
| phy_reg = phy_read(db->ioaddr, |
| db->phy_addr, 18, db->chip_id) & ~0x1000; |
| |
| phy_write(db->ioaddr, |
| db->phy_addr, 18, phy_reg, db->chip_id); |
| } |
| |
| /* Phyxcer capability setting */ |
| phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0; |
| |
| if (db->media_mode & DMFE_AUTO) { |
| /* AUTO Mode */ |
| phy_reg |= db->PHY_reg4; |
| } else { |
| /* Force Mode */ |
| switch(db->media_mode) { |
| case DMFE_10MHF: phy_reg |= 0x20; break; |
| case DMFE_10MFD: phy_reg |= 0x40; break; |
| case DMFE_100MHF: phy_reg |= 0x80; break; |
| case DMFE_100MFD: phy_reg |= 0x100; break; |
| } |
| if (db->chip_id == PCI_DM9009_ID) phy_reg &= 0x61; |
| } |
| |
| /* Write new capability to Phyxcer Reg4 */ |
| if ( !(phy_reg & 0x01e0)) { |
| phy_reg|=db->PHY_reg4; |
| db->media_mode|=DMFE_AUTO; |
| } |
| phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id); |
| |
| /* Restart Auto-Negotiation */ |
| if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) |
| phy_write(db->ioaddr, db->phy_addr, 0, 0x1800, db->chip_id); |
| if ( !db->chip_type ) |
| phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id); |
| } |
| |
| |
| /* |
| * Process op-mode |
| * AUTO mode : PHY controller in Auto-negotiation Mode |
| * Force mode: PHY controller in force mode with HUB |
| * N-way force capability with SWITCH |
| */ |
| |
| static void dmfe_process_mode(struct dmfe_board_info *db) |
| { |
| u16 phy_reg; |
| |
| /* Full Duplex Mode Check */ |
| if (db->op_mode & 0x4) |
| db->cr6_data |= CR6_FDM; /* Set Full Duplex Bit */ |
| else |
| db->cr6_data &= ~CR6_FDM; /* Clear Full Duplex Bit */ |
| |
| /* Transciver Selection */ |
| if (db->op_mode & 0x10) /* 1M HomePNA */ |
| db->cr6_data |= 0x40000;/* External MII select */ |
| else |
| db->cr6_data &= ~0x40000;/* Internal 10/100 transciver */ |
| |
| update_cr6(db->cr6_data, db->ioaddr); |
| |
| /* 10/100M phyxcer force mode need */ |
| if ( !(db->media_mode & 0x18)) { |
| /* Forece Mode */ |
| phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id); |
| if ( !(phy_reg & 0x1) ) { |
| /* parter without N-Way capability */ |
| phy_reg = 0x0; |
| switch(db->op_mode) { |
| case DMFE_10MHF: phy_reg = 0x0; break; |
| case DMFE_10MFD: phy_reg = 0x100; break; |
| case DMFE_100MHF: phy_reg = 0x2000; break; |
| case DMFE_100MFD: phy_reg = 0x2100; break; |
| } |
| phy_write(db->ioaddr, |
| db->phy_addr, 0, phy_reg, db->chip_id); |
| if ( db->chip_type && (db->chip_id == PCI_DM9102_ID) ) |
| mdelay(20); |
| phy_write(db->ioaddr, |
| db->phy_addr, 0, phy_reg, db->chip_id); |
| } |
| } |
| } |
| |
| |
| /* |
| * Write a word to Phy register |
| */ |
| |
| static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, |
| u16 phy_data, u32 chip_id) |
| { |
| u16 i; |
| unsigned long ioaddr; |
| |
| if (chip_id == PCI_DM9132_ID) { |
| ioaddr = iobase + 0x80 + offset * 4; |
| outw(phy_data, ioaddr); |
| } else { |
| /* DM9102/DM9102A Chip */ |
| ioaddr = iobase + DCR9; |
| |
| /* Send 33 synchronization clock to Phy controller */ |
| for (i = 0; i < 35; i++) |
| phy_write_1bit(ioaddr, PHY_DATA_1); |
| |
| /* Send start command(01) to Phy */ |
| phy_write_1bit(ioaddr, PHY_DATA_0); |
| phy_write_1bit(ioaddr, PHY_DATA_1); |
| |
| /* Send write command(01) to Phy */ |
| phy_write_1bit(ioaddr, PHY_DATA_0); |
| phy_write_1bit(ioaddr, PHY_DATA_1); |
| |
| /* Send Phy address */ |
| for (i = 0x10; i > 0; i = i >> 1) |
| phy_write_1bit(ioaddr, |
| phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); |
| |
| /* Send register address */ |
| for (i = 0x10; i > 0; i = i >> 1) |
| phy_write_1bit(ioaddr, |
| offset & i ? PHY_DATA_1 : PHY_DATA_0); |
| |
| /* written trasnition */ |
| phy_write_1bit(ioaddr, PHY_DATA_1); |
| phy_write_1bit(ioaddr, PHY_DATA_0); |
| |
| /* Write a word data to PHY controller */ |
| for ( i = 0x8000; i > 0; i >>= 1) |
| phy_write_1bit(ioaddr, |
| phy_data & i ? PHY_DATA_1 : PHY_DATA_0); |
| } |
| } |
| |
| |
| /* |
| * Read a word data from phy register |
| */ |
| |
| static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id) |
| { |
| int i; |
| u16 phy_data; |
| unsigned long ioaddr; |
| |
| if (chip_id == PCI_DM9132_ID) { |
| /* DM9132 Chip */ |
| ioaddr = iobase + 0x80 + offset * 4; |
| phy_data = inw(ioaddr); |
| } else { |
| /* DM9102/DM9102A Chip */ |
| ioaddr = iobase + DCR9; |
| |
| /* Send 33 synchronization clock to Phy controller */ |
| for (i = 0; i < 35; i++) |
| phy_write_1bit(ioaddr, PHY_DATA_1); |
| |
| /* Send start command(01) to Phy */ |
| phy_write_1bit(ioaddr, PHY_DATA_0); |
| phy_write_1bit(ioaddr, PHY_DATA_1); |
| |
| /* Send read command(10) to Phy */ |
| phy_write_1bit(ioaddr, PHY_DATA_1); |
| phy_write_1bit(ioaddr, PHY_DATA_0); |
| |
| /* Send Phy address */ |
| for (i = 0x10; i > 0; i = i >> 1) |
| phy_write_1bit(ioaddr, |
| phy_addr & i ? PHY_DATA_1 : PHY_DATA_0); |
| |
| /* Send register address */ |
| for (i = 0x10; i > 0; i = i >> 1) |
| phy_write_1bit(ioaddr, |
| offset & i ? PHY_DATA_1 : PHY_DATA_0); |
| |
| /* Skip transition state */ |
| phy_read_1bit(ioaddr); |
| |
| /* read 16bit data */ |
| for (phy_data = 0, i = 0; i < 16; i++) { |
| phy_data <<= 1; |
| phy_data |= phy_read_1bit(ioaddr); |
| } |
| } |
| |
| return phy_data; |
| } |
| |
| |
| /* |
| * Write one bit data to Phy Controller |
| */ |
| |
| static void phy_write_1bit(unsigned long ioaddr, u32 phy_data) |
| { |
| outl(phy_data, ioaddr); /* MII Clock Low */ |
| udelay(1); |
| outl(phy_data | MDCLKH, ioaddr); /* MII Clock High */ |
| udelay(1); |
| outl(phy_data, ioaddr); /* MII Clock Low */ |
| udelay(1); |
| } |
| |
| |
| /* |
| * Read one bit phy data from PHY controller |
| */ |
| |
| static u16 phy_read_1bit(unsigned long ioaddr) |
| { |
| u16 phy_data; |
| |
| outl(0x50000, ioaddr); |
| udelay(1); |
| phy_data = ( inl(ioaddr) >> 19 ) & 0x1; |
| outl(0x40000, ioaddr); |
| udelay(1); |
| |
| return phy_data; |
| } |
| |
| |
| /* |
| * Parser SROM and media mode |
| */ |
| |
| static void dmfe_parse_srom(struct dmfe_board_info * db) |
| { |
| char * srom = db->srom; |
| int dmfe_mode, tmp_reg; |
| |
| DMFE_DBUG(0, "dmfe_parse_srom() ", 0); |
| |
| /* Init CR15 */ |
| db->cr15_data = CR15_DEFAULT; |
| |
| /* Check SROM Version */ |
| if ( ( (int) srom[18] & 0xff) == SROM_V41_CODE) { |
| /* SROM V4.01 */ |
| /* Get NIC support media mode */ |
| db->NIC_capability = le16_to_cpup((__le16 *) (srom + 34)); |
| db->PHY_reg4 = 0; |
| for (tmp_reg = 1; tmp_reg < 0x10; tmp_reg <<= 1) { |
| switch( db->NIC_capability & tmp_reg ) { |
| case 0x1: db->PHY_reg4 |= 0x0020; break; |
| case 0x2: db->PHY_reg4 |= 0x0040; break; |
| case 0x4: db->PHY_reg4 |= 0x0080; break; |
| case 0x8: db->PHY_reg4 |= 0x0100; break; |
| } |
| } |
| |
| /* Media Mode Force or not check */ |
| dmfe_mode = (le32_to_cpup((__le32 *) (srom + 34)) & |
| le32_to_cpup((__le32 *) (srom + 36))); |
| switch(dmfe_mode) { |
| case 0x4: dmfe_media_mode = DMFE_100MHF; break; /* 100MHF */ |
| case 0x2: dmfe_media_mode = DMFE_10MFD; break; /* 10MFD */ |
| case 0x8: dmfe_media_mode = DMFE_100MFD; break; /* 100MFD */ |
| case 0x100: |
| case 0x200: dmfe_media_mode = DMFE_1M_HPNA; break;/* HomePNA */ |
| } |
| |
| /* Special Function setting */ |
| /* VLAN function */ |
| if ( (SF_mode & 0x1) || (srom[43] & 0x80) ) |
| db->cr15_data |= 0x40; |
| |
| /* Flow Control */ |
| if ( (SF_mode & 0x2) || (srom[40] & 0x1) ) |
| db->cr15_data |= 0x400; |
| |
| /* TX pause packet */ |
| if ( (SF_mode & 0x4) || (srom[40] & 0xe) ) |
| db->cr15_data |= 0x9800; |
| } |
| |
| /* Parse HPNA parameter */ |
| db->HPNA_command = 1; |
| |
| /* Accept remote command or not */ |
| if (HPNA_rx_cmd == 0) |
| db->HPNA_command |= 0x8000; |
| |
| /* Issue remote command & operation mode */ |
| if (HPNA_tx_cmd == 1) |
| switch(HPNA_mode) { /* Issue Remote Command */ |
| case 0: db->HPNA_command |= 0x0904; break; |
| case 1: db->HPNA_command |= 0x0a00; break; |
| case 2: db->HPNA_command |= 0x0506; break; |
| case 3: db->HPNA_command |= 0x0602; break; |
| } |
| else |
| switch(HPNA_mode) { /* Don't Issue */ |
| case 0: db->HPNA_command |= 0x0004; break; |
| case 1: db->HPNA_command |= 0x0000; break; |
| case 2: db->HPNA_command |= 0x0006; break; |
| case 3: db->HPNA_command |= 0x0002; break; |
| } |
| |
| /* Check DM9801 or DM9802 present or not */ |
| db->HPNA_present = 0; |
| update_cr6(db->cr6_data|0x40000, db->ioaddr); |
| tmp_reg = phy_read(db->ioaddr, db->phy_addr, 3, db->chip_id); |
| if ( ( tmp_reg & 0xfff0 ) == 0xb900 ) { |
| /* DM9801 or DM9802 present */ |
| db->HPNA_timer = 8; |
| if ( phy_read(db->ioaddr, db->phy_addr, 31, db->chip_id) == 0x4404) { |
| /* DM9801 HomeRun */ |
| db->HPNA_present = 1; |
| dmfe_program_DM9801(db, tmp_reg); |
| } else { |
| /* DM9802 LongRun */ |
| db->HPNA_present = 2; |
| dmfe_program_DM9802(db); |
| } |
| } |
| |
| } |
| |
| |
| /* |
| * Init HomeRun DM9801 |
| */ |
| |
| static void dmfe_program_DM9801(struct dmfe_board_info * db, int HPNA_rev) |
| { |
| uint reg17, reg25; |
| |
| if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9801_NOISE_FLOOR; |
| switch(HPNA_rev) { |
| case 0xb900: /* DM9801 E3 */ |
| db->HPNA_command |= 0x1000; |
| reg25 = phy_read(db->ioaddr, db->phy_addr, 24, db->chip_id); |
| reg25 = ( (reg25 + HPNA_NoiseFloor) & 0xff) | 0xf000; |
| reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); |
| break; |
| case 0xb901: /* DM9801 E4 */ |
| reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); |
| reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor; |
| reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); |
| reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor + 3; |
| break; |
| case 0xb902: /* DM9801 E5 */ |
| case 0xb903: /* DM9801 E6 */ |
| default: |
| db->HPNA_command |= 0x1000; |
| reg25 = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); |
| reg25 = (reg25 & 0xff00) + HPNA_NoiseFloor - 5; |
| reg17 = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id); |
| reg17 = (reg17 & 0xfff0) + HPNA_NoiseFloor; |
| break; |
| } |
| phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); |
| phy_write(db->ioaddr, db->phy_addr, 17, reg17, db->chip_id); |
| phy_write(db->ioaddr, db->phy_addr, 25, reg25, db->chip_id); |
| } |
| |
| |
| /* |
| * Init HomeRun DM9802 |
| */ |
| |
| static void dmfe_program_DM9802(struct dmfe_board_info * db) |
| { |
| uint phy_reg; |
| |
| if ( !HPNA_NoiseFloor ) HPNA_NoiseFloor = DM9802_NOISE_FLOOR; |
| phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, db->chip_id); |
| phy_reg = phy_read(db->ioaddr, db->phy_addr, 25, db->chip_id); |
| phy_reg = ( phy_reg & 0xff00) + HPNA_NoiseFloor; |
| phy_write(db->ioaddr, db->phy_addr, 25, phy_reg, db->chip_id); |
| } |
| |
| |
| /* |
| * Check remote HPNA power and speed status. If not correct, |
| * issue command again. |
| */ |
| |
| static void dmfe_HPNA_remote_cmd_chk(struct dmfe_board_info * db) |
| { |
| uint phy_reg; |
| |
| /* Got remote device status */ |
| phy_reg = phy_read(db->ioaddr, db->phy_addr, 17, db->chip_id) & 0x60; |
| switch(phy_reg) { |
| case 0x00: phy_reg = 0x0a00;break; /* LP/LS */ |
| case 0x20: phy_reg = 0x0900;break; /* LP/HS */ |
| case 0x40: phy_reg = 0x0600;break; /* HP/LS */ |
| case 0x60: phy_reg = 0x0500;break; /* HP/HS */ |
| } |
| |
| /* Check remote device status match our setting ot not */ |
| if ( phy_reg != (db->HPNA_command & 0x0f00) ) { |
| phy_write(db->ioaddr, db->phy_addr, 16, db->HPNA_command, |
| db->chip_id); |
| db->HPNA_timer=8; |
| } else |
| db->HPNA_timer=600; /* Match, every 10 minutes, check */ |
| } |
| |
| |
| |
| static DEFINE_PCI_DEVICE_TABLE(dmfe_pci_tbl) = { |
| { 0x1282, 0x9132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9132_ID }, |
| { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9102_ID }, |
| { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9100_ID }, |
| { 0x1282, 0x9009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_DM9009_ID }, |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, dmfe_pci_tbl); |
| |
| |
| #ifdef CONFIG_PM |
| static int dmfe_suspend(struct pci_dev *pci_dev, pm_message_t state) |
| { |
| struct net_device *dev = pci_get_drvdata(pci_dev); |
| struct dmfe_board_info *db = netdev_priv(dev); |
| u32 tmp; |
| |
| /* Disable upper layer interface */ |
| netif_device_detach(dev); |
| |
| /* Disable Tx/Rx */ |
| db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); |
| update_cr6(db->cr6_data, dev->base_addr); |
| |
| /* Disable Interrupt */ |
| outl(0, dev->base_addr + DCR7); |
| outl(inl (dev->base_addr + DCR5), dev->base_addr + DCR5); |
| |
| /* Fre RX buffers */ |
| dmfe_free_rxbuffer(db); |
| |
| /* Enable WOL */ |
| pci_read_config_dword(pci_dev, 0x40, &tmp); |
| tmp &= ~(DMFE_WOL_LINKCHANGE|DMFE_WOL_MAGICPACKET); |
| |
| if (db->wol_mode & WAKE_PHY) |
| tmp |= DMFE_WOL_LINKCHANGE; |
| if (db->wol_mode & WAKE_MAGIC) |
| tmp |= DMFE_WOL_MAGICPACKET; |
| |
| pci_write_config_dword(pci_dev, 0x40, tmp); |
| |
| pci_enable_wake(pci_dev, PCI_D3hot, 1); |
| pci_enable_wake(pci_dev, PCI_D3cold, 1); |
| |
| /* Power down device*/ |
| pci_save_state(pci_dev); |
| pci_set_power_state(pci_dev, pci_choose_state (pci_dev, state)); |
| |
| return 0; |
| } |
| |
| static int dmfe_resume(struct pci_dev *pci_dev) |
| { |
| struct net_device *dev = pci_get_drvdata(pci_dev); |
| u32 tmp; |
| |
| pci_set_power_state(pci_dev, PCI_D0); |
| pci_restore_state(pci_dev); |
| |
| /* Re-initialize DM910X board */ |
| dmfe_init_dm910x(dev); |
| |
| /* Disable WOL */ |
| pci_read_config_dword(pci_dev, 0x40, &tmp); |
| |
| tmp &= ~(DMFE_WOL_LINKCHANGE | DMFE_WOL_MAGICPACKET); |
| pci_write_config_dword(pci_dev, 0x40, tmp); |
| |
| pci_enable_wake(pci_dev, PCI_D3hot, 0); |
| pci_enable_wake(pci_dev, PCI_D3cold, 0); |
| |
| /* Restart upper layer interface */ |
| netif_device_attach(dev); |
| |
| return 0; |
| } |
| #else |
| #define dmfe_suspend NULL |
| #define dmfe_resume NULL |
| #endif |
| |
| static struct pci_driver dmfe_driver = { |
| .name = "dmfe", |
| .id_table = dmfe_pci_tbl, |
| .probe = dmfe_init_one, |
| .remove = __devexit_p(dmfe_remove_one), |
| .suspend = dmfe_suspend, |
| .resume = dmfe_resume |
| }; |
| |
| MODULE_AUTHOR("Sten Wang, sten_wang@davicom.com.tw"); |
| MODULE_DESCRIPTION("Davicom DM910X fast ethernet driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| module_param(debug, int, 0); |
| module_param(mode, byte, 0); |
| module_param(cr6set, int, 0); |
| module_param(chkmode, byte, 0); |
| module_param(HPNA_mode, byte, 0); |
| module_param(HPNA_rx_cmd, byte, 0); |
| module_param(HPNA_tx_cmd, byte, 0); |
| module_param(HPNA_NoiseFloor, byte, 0); |
| module_param(SF_mode, byte, 0); |
| MODULE_PARM_DESC(debug, "Davicom DM9xxx enable debugging (0-1)"); |
| MODULE_PARM_DESC(mode, "Davicom DM9xxx: " |
| "Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA"); |
| |
| MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function " |
| "(bit 0: VLAN, bit 1 Flow Control, bit 2: TX pause packet)"); |
| |
| /* Description: |
| * when user used insmod to add module, system invoked init_module() |
| * to initialize and register. |
| */ |
| |
| static int __init dmfe_init_module(void) |
| { |
| int rc; |
| |
| printk(version); |
| printed_version = 1; |
| |
| DMFE_DBUG(0, "init_module() ", debug); |
| |
| if (debug) |
| dmfe_debug = debug; /* set debug flag */ |
| if (cr6set) |
| dmfe_cr6_user_set = cr6set; |
| |
| switch(mode) { |
| case DMFE_10MHF: |
| case DMFE_100MHF: |
| case DMFE_10MFD: |
| case DMFE_100MFD: |
| case DMFE_1M_HPNA: |
| dmfe_media_mode = mode; |
| break; |
| default:dmfe_media_mode = DMFE_AUTO; |
| break; |
| } |
| |
| if (HPNA_mode > 4) |
| HPNA_mode = 0; /* Default: LP/HS */ |
| if (HPNA_rx_cmd > 1) |
| HPNA_rx_cmd = 0; /* Default: Ignored remote cmd */ |
| if (HPNA_tx_cmd > 1) |
| HPNA_tx_cmd = 0; /* Default: Don't issue remote cmd */ |
| if (HPNA_NoiseFloor > 15) |
| HPNA_NoiseFloor = 0; |
| |
| rc = pci_register_driver(&dmfe_driver); |
| if (rc < 0) |
| return rc; |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Description: |
| * when user used rmmod to delete module, system invoked clean_module() |
| * to un-register all registered services. |
| */ |
| |
| static void __exit dmfe_cleanup_module(void) |
| { |
| DMFE_DBUG(0, "dmfe_clean_module() ", debug); |
| pci_unregister_driver(&dmfe_driver); |
| } |
| |
| module_init(dmfe_init_module); |
| module_exit(dmfe_cleanup_module); |