b44: Fix frequent link changes
This fixes the issue of frequent link changes under heavy traffic reported
below:
http://bugzilla.kernel.org/show_bug.cgi?id=7696
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=216338
The b44 chip occasionally needs to be reset when ISTAT_ERRORS are
encountered. The reset sequence includes a PHY reset that will take many
seconds to complete and cause the link to go down and up. By skipping the
PHY reset, it will greatly reduce the interruption when ISTAT_ERRORS are
encountered.
Change the full_reset parameter to reset_kind parameter in b44_init_hw().
This will allow PHY reset to be skipped when ISTAT_ERRORS are encountered.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 5eb2ec6..1c8fb8e 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -110,6 +110,11 @@
static void b44_halt(struct b44 *);
static void b44_init_rings(struct b44 *);
+
+#define B44_FULL_RESET 1
+#define B44_FULL_RESET_SKIP_PHY 2
+#define B44_PARTIAL_RESET 3
+
static void b44_init_hw(struct b44 *, int);
static int dma_desc_align_mask;
@@ -884,7 +889,7 @@
spin_lock_irqsave(&bp->lock, flags);
b44_halt(bp);
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET_SKIP_PHY);
netif_wake_queue(bp->dev);
spin_unlock_irqrestore(&bp->lock, flags);
done = 1;
@@ -954,7 +959,7 @@
b44_halt(bp);
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
spin_unlock_irq(&bp->lock);
@@ -1071,7 +1076,7 @@
b44_halt(bp);
dev->mtu = new_mtu;
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
spin_unlock_irq(&bp->lock);
b44_enable_ints(bp);
@@ -1368,12 +1373,12 @@
* packet processing. Invoked with bp->lock held.
*/
static void __b44_set_rx_mode(struct net_device *);
-static void b44_init_hw(struct b44 *bp, int full_reset)
+static void b44_init_hw(struct b44 *bp, int reset_kind)
{
u32 val;
b44_chip_reset(bp);
- if (full_reset) {
+ if (reset_kind == B44_FULL_RESET) {
b44_phy_reset(bp);
b44_setup_phy(bp);
}
@@ -1390,7 +1395,10 @@
bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
- if (full_reset) {
+ if (reset_kind == B44_PARTIAL_RESET) {
+ bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
+ (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
+ } else {
bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
@@ -1401,9 +1409,6 @@
bp->rx_prod = bp->rx_pending;
bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
- } else {
- bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
- (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
}
val = br32(bp, B44_ENET_CTRL);
@@ -1420,7 +1425,7 @@
goto out;
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
b44_check_phy(bp);
@@ -1629,7 +1634,7 @@
netif_poll_enable(dev);
if (bp->flags & B44_FLAG_WOL_ENABLE) {
- b44_init_hw(bp, 0);
+ b44_init_hw(bp, B44_PARTIAL_RESET);
b44_setup_wol(bp);
}
@@ -1905,7 +1910,7 @@
b44_halt(bp);
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
netif_wake_queue(bp->dev);
spin_unlock_irq(&bp->lock);
@@ -1948,7 +1953,7 @@
if (bp->flags & B44_FLAG_PAUSE_AUTO) {
b44_halt(bp);
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
} else {
__b44_set_flow_ctrl(bp, bp->flags);
}
@@ -2304,7 +2309,7 @@
free_irq(dev->irq, dev);
if (bp->flags & B44_FLAG_WOL_ENABLE) {
- b44_init_hw(bp, 0);
+ b44_init_hw(bp, B44_PARTIAL_RESET);
b44_setup_wol(bp);
}
pci_disable_device(pdev);
@@ -2329,7 +2334,7 @@
spin_lock_irq(&bp->lock);
b44_init_rings(bp);
- b44_init_hw(bp, 1);
+ b44_init_hw(bp, B44_FULL_RESET);
netif_device_attach(bp->dev);
spin_unlock_irq(&bp->lock);