Merge "msm: hdmi-tx: describe unique device properties"
diff --git a/Documentation/devicetree/bindings/fb/msm-hdmi-tx.txt b/Documentation/devicetree/bindings/fb/msm-hdmi-tx.txt
index d2ec3cd..e777094 100644
--- a/Documentation/devicetree/bindings/fb/msm-hdmi-tx.txt
+++ b/Documentation/devicetree/bindings/fb/msm-hdmi-tx.txt
@@ -6,20 +6,25 @@
 - reg: offset and length of the register regions(s) for the device.
 - reg-names: a list of strings that map in order to the list of regs.
 
-- <supply-name>-supply: phandle to the regulator device tree node.
-- <compatible-name>-supply-names: a list of strings that map in order
+- hpd-5v-supply: phandle to the 5V regulator device tree node.
+- core-vdda-supply: phandle to the HDMI vdda regulator device tree node.
+- core-vcc-supply: phandle to the HDMI vcc regulator device tree node.
+- qcom,hdmi-tx-supply-names: a list of strings that map in order
   to the list of supplies.
-- <compatible-name>-supply-type: a type of supply(ies) mentioned above.
+- qcom,hdmi-tx-supply-type: a type of supply(ies) mentioned above.
     0 = supply with controlled output
     1 = supply without controlled output. i.e. voltage switch
-- <compatible-name>-min-voltage-level: specifies minimum voltage level
+- qcom,hdmi-tx-min-voltage-level: specifies minimum voltage level
   of supply(ies) mentioned above.
-- <compatible-name>-max-voltage-level: specifies maximum voltage level
+- qcom,hdmi-tx-max-voltage-level: specifies maximum voltage level
   of supply(ies) mentioned above.
-- <compatible-name>-op-mode: specifies optimum operating mode of
+- qcom,hdmi-tx-op-mode: specifies optimum operating mode of
   supply(ies) mentioned above.
 
-- <compatible-name>-<gpio-name>: specifies gpios assigned for the device.
+- qcom,hdmi-tx-cec: gpio for Consumer Electronics Control (cec) line.
+- qcom,hdmi-tx-ddc-clk: gpio for Display Data Channel (ddc) clock line.
+- qcom,hdmi-tx-ddc-data: gpio for ddc data line.
+- qcom,hdmi-tx-hpd: gpio required for HDMI hot-plug detect.
 
 Optional properties:
 - qcom,hdmi-tx-mux-sel: gpio required to toggle HDMI output between