| #ifndef quickcam_messenger_h |
| #define quickcam_messenger_h |
| |
| #ifndef CONFIG_INPUT |
| /* if we're not using input we dummy out these functions */ |
| #define qcm_register_input(...) |
| #define qcm_unregister_input(...) |
| #define qcm_report_buttonstat(...) |
| #define qcm_setup_input_int(...) 0 |
| #define qcm_stop_int_data(...) |
| #define qcm_alloc_int_urb(...) 0 |
| #define qcm_free_int(...) |
| #endif |
| |
| |
| #define CHECK_RET(ret, expr) \ |
| if ((ret = expr) < 0) return ret |
| |
| /* Control Registers for the STVV6422 ASIC |
| * - this define is taken from the qc-usb-messenger code |
| */ |
| #define STV_ISO_ENABLE 0x1440 |
| #define ISOC_PACKET_SIZE 1023 |
| |
| /* Chip identification number including revision indicator */ |
| #define CMOS_SENSOR_IDREV 0xE00A |
| |
| struct rgb { |
| u8 b; |
| u8 g; |
| u8 r; |
| u8 b2; |
| u8 g2; |
| u8 r2; |
| }; |
| |
| struct bayL0 { |
| #ifdef __BIG_ENDIAN |
| u8 r; |
| u8 g; |
| #elif __LITTLE_ENDIAN |
| u8 g; |
| u8 r; |
| #else |
| #error not byte order defined |
| #endif |
| }; |
| |
| struct bayL1 { |
| #ifdef __BIG_ENDIAN |
| u8 g; |
| u8 b; |
| #elif __LITTLE_ENDIAN |
| u8 b; |
| u8 g; |
| #else |
| #error not byte order defined |
| #endif |
| }; |
| |
| struct cam_size { |
| u16 width; |
| u16 height; |
| u8 cmd; |
| }; |
| |
| static const struct cam_size camera_sizes[] = { |
| { 160, 120, 0xf }, |
| { 320, 240, 0x2 }, |
| }; |
| |
| enum frame_sizes { |
| SIZE_160X120 = 0, |
| SIZE_320X240 = 1, |
| }; |
| |
| #define MAX_FRAME_SIZE SIZE_320X240 |
| |
| struct qcm { |
| u16 colour; |
| u16 hue; |
| u16 brightness; |
| u16 contrast; |
| u16 whiteness; |
| |
| u8 size; |
| int height; |
| int width; |
| u8 *scratch; |
| struct urb *button_urb; |
| u8 button_sts; |
| u8 button_sts_buf; |
| |
| #ifdef CONFIG_INPUT |
| struct input_dev *input; |
| char input_physname[64]; |
| #endif |
| }; |
| |
| struct regval { |
| u16 reg; |
| u8 val; |
| }; |
| /* this table is derived from the |
| qc-usb-messenger code */ |
| static const struct regval regval_table[] = { |
| { STV_ISO_ENABLE, 0x00 }, |
| { 0x1436, 0x00 }, { 0x1432, 0x03 }, |
| { 0x143a, 0xF9 }, { 0x0509, 0x38 }, |
| { 0x050a, 0x38 }, { 0x050b, 0x38 }, |
| { 0x050c, 0x2A }, { 0x050d, 0x01 }, |
| { 0x1431, 0x00 }, { 0x1433, 0x34 }, |
| { 0x1438, 0x18 }, { 0x1439, 0x00 }, |
| { 0x143b, 0x05 }, { 0x143c, 0x00 }, |
| { 0x143e, 0x01 }, { 0x143d, 0x00 }, |
| { 0x1442, 0xe2 }, { 0x1500, 0xd0 }, |
| { 0x1500, 0xd0 }, { 0x1500, 0x50 }, |
| { 0x1501, 0xaf }, { 0x1502, 0xc2 }, |
| { 0x1503, 0x45 }, { 0x1505, 0x02 }, |
| { 0x150e, 0x8e }, { 0x150f, 0x37 }, |
| { 0x15c0, 0x00 }, |
| }; |
| |
| static const unsigned char marker[] = { 0x00, 0xff, 0x00, 0xFF }; |
| |
| #endif /* quickcam_messenger_h */ |