| |
| /* |
| * File: include/asm-blackfin/mach-bf561/anomaly.h |
| * Based on: |
| * Author: |
| * |
| * Created: |
| * Description: |
| * |
| * Rev: |
| * |
| * Modified: |
| * |
| * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. |
| * If not, write to the Free Software Foundation, |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* This file shoule be up to date with: |
| * - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List |
| */ |
| |
| #ifndef _MACH_ANOMALY_H_ |
| #define _MACH_ANOMALY_H_ |
| |
| /* We do not support 0.1 or 0.4 silicon - sorry */ |
| #if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4)) |
| #error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4 |
| #endif |
| |
| /* Issues that are common to 0.5 and 0.3 silicon */ |
| #if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) |
| #define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in |
| slot1 and store of a P register in slot 2 is not |
| supported */ |
| #define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not |
| updated at the same time. */ |
| #define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned |
| memory locations */ |
| #define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR |
| registers */ |
| #define ANOMALY_05000127 /* Signbits instruction not functional under certain |
| conditions */ |
| #define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */ |
| #define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out |
| upper bits */ |
| #define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ |
| #define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame |
| syncs */ |
| #define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz |
| and higher devices */ |
| #define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */ |
| #define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */ |
| #define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not |
| functional */ |
| #define ANOMALY_05000245 /* Spurious Hardware Error from an access in the |
| shadow of a conditional branch */ |
| #define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop |
| may cause bad instruction fetches */ |
| #define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on |
| external SPORT TX and RX clocks */ |
| #define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */ |
| #define ANOMALY_05000269 /* High I/O activity causes output voltage of internal |
| voltage regulator (VDDint) to increase */ |
| #define ANOMALY_05000270 /* High I/O activity causes output voltage of internal |
| voltage regulator (VDDint) to decrease */ |
| #define ANOMALY_05000272 /* Certain data cache write through modes fail for |
| VDDint <=0.9V */ |
| #define ANOMALY_05000274 /* Data cache write back to external synchronous memory |
| may be lost */ |
| #define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */ |
| #define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC |
| registers are interrupted */ |
| |
| #endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */ |
| |
| #if (defined(CONFIG_BF_REV_0_5)) |
| #define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT |
| mode with external clock */ |
| #define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to |
| using IMDMA */ |
| #endif |
| |
| #if (defined(CONFIG_BF_REV_0_3)) |
| #define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input) |
| Mode with 0 Frame Syncs */ |
| #define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ |
| #define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through |
| cache data writes */ |
| #define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */ |
| #define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ |
| #define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ |
| #define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an |
| accumulator saturation */ |
| #define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General |
| Purpose TX or RX modes */ |
| #define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration |
| registers */ |
| #define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with |
| External Frame Syncs */ |
| #define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ |
| #define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits |
| (not a meaningful mode) */ |
| #define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer |
| Placement in Memory */ |
| #define ANOMALY_05000189 /* False Protection Exception */ |
| #define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs |
| when polarity setting is changed */ |
| #define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data |
| corruption */ |
| #define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding |
| memory read */ |
| #define ANOMALY_05000199 /* DMA current address shows wrong value during carry |
| fix */ |
| #define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during |
| inactive channels in certain conditions */ |
| #define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG |
| situation */ |
| #define ANOMALY_05000204 /* Incorrect data read with write-through cache and |
| allocate cache lines on reads only mode */ |
| #define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA |
| stopping */ |
| #define ANOMALY_05000207 /* Recovery from "brown-out" condition */ |
| #define ANOMALY_05000209 /* Speed-Path in computational unit affects certain |
| instructions */ |
| #define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ |
| #define ANOMALY_05000219 /* NMI event at boot time results in unpredictable |
| state */ |
| #define ANOMALY_05000220 /* Data Corruption with Cached External Memory and |
| Non-Cached On-Chip L2 Memory */ |
| #define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ |
| #define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect |
| data */ |
| #define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate |
| Differences in certain Conditions */ |
| #define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ |
| #define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in |
| multichannel mode */ |
| #define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to |
| hardware reset */ |
| #define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of |
| Control causes failures */ |
| #define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */ |
| #define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel |
| (TDM) mode in certain conditions */ |
| #define ANOMALY_05000251 /* Exception not generated for MMR accesses in |
| reserved region */ |
| #define ANOMALY_05000253 /* Maximum external clock speed for Timers */ |
| #define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12 |
| of the ICPLB Data registers differ */ |
| #define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ |
| #define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ |
| #define ANOMALY_05000262 /* Stores to data cache may be lost */ |
| #define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB |
| exception */ |
| #define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second |
| to last instruction in hardware loop */ |
| #define ANOMALY_05000276 /* Timing requirements change for External Frame |
| Sync PPI Modes with non-zero PPI_DELAY */ |
| #define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause |
| DMA system instability */ |
| #define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is |
| not restored */ |
| #define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed |
| in a particular stage */ |
| #define ANOMALY_05000287 /* A read will receive incorrect data under certain |
| conditions */ |
| #define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ |
| #endif |
| |
| #endif /* _MACH_ANOMALY_H_ */ |