| /* |
| * include/asm/m32104ut/m32104ut_pld.h |
| * |
| * Definitions for Programable Logic Device(PLD) on M32104UT board. |
| * Based on m32700ut_pld.h |
| * |
| * Copyright (c) 2002 Takeo Takahashi |
| * Copyright (c) 2005 Naoto Sugai |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file "COPYING" in the main directory of |
| * this archive for more details. |
| */ |
| |
| #ifndef _M32104UT_M32104UT_PLD_H |
| #define _M32104UT_M32104UT_PLD_H |
| |
| #include <linux/config.h> |
| |
| #if defined(CONFIG_PLAT_M32104UT) |
| #define PLD_PLAT_BASE 0x02c00000 |
| #else |
| #error "no platform configuration" |
| #endif |
| |
| #ifndef __ASSEMBLY__ |
| /* |
| * C functions use non-cache address. |
| */ |
| #define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */) |
| #define __reg8 (volatile unsigned char *) |
| #define __reg16 (volatile unsigned short *) |
| #define __reg32 (volatile unsigned int *) |
| #else |
| #define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET) |
| #define __reg8 |
| #define __reg16 |
| #define __reg32 |
| #endif /* __ASSEMBLY__ */ |
| |
| /* CFC */ |
| #define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) |
| #define PLD_CFSTS __reg16(PLD_BASE + 0x0002) |
| #define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) |
| #define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) |
| |
| /* MMC */ |
| #define PLD_MMCCR __reg16(PLD_BASE + 0x4000) |
| #define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) |
| #define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) |
| #define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) |
| #define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) |
| #define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) |
| #define PLD_MMCDET __reg16(PLD_BASE + 0x4010) |
| #define PLD_MMCWP __reg16(PLD_BASE + 0x4012) |
| #define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) |
| #define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) |
| #define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) |
| #define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) |
| |
| /* ICU |
| * ICUISTS: status register |
| * ICUIREQ0: request register |
| * ICUIREQ1: request register |
| * ICUCR3: control register for CFIREQ# interrupt |
| * ICUCR4: control register for CFC Card insert interrupt |
| * ICUCR5: control register for CFC Card eject interrupt |
| * ICUCR6: control register for external interrupt |
| * ICUCR11: control register for MMC Card insert/eject interrupt |
| * ICUCR13: control register for SC error interrupt |
| * ICUCR14: control register for SC receive interrupt |
| * ICUCR15: control register for SC send interrupt |
| */ |
| |
| #define PLD_IRQ_INT0 (M32104UT_PLD_IRQ_BASE + 0) /* None */ |
| #define PLD_IRQ_CFIREQ (M32104UT_PLD_IRQ_BASE + 3) /* CF IREQ */ |
| #define PLD_IRQ_CFC_INSERT (M32104UT_PLD_IRQ_BASE + 4) /* CF Insert */ |
| #define PLD_IRQ_CFC_EJECT (M32104UT_PLD_IRQ_BASE + 5) /* CF Eject */ |
| #define PLD_IRQ_EXINT (M32104UT_PLD_IRQ_BASE + 6) /* EXINT */ |
| #define PLD_IRQ_MMCCARD (M32104UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */ |
| #define PLD_IRQ_SC_ERROR (M32104UT_PLD_IRQ_BASE + 13) /* SC error */ |
| #define PLD_IRQ_SC_RCV (M32104UT_PLD_IRQ_BASE + 14) /* SC receive */ |
| #define PLD_IRQ_SC_SND (M32104UT_PLD_IRQ_BASE + 15) /* SC send */ |
| |
| #define PLD_ICUISTS __reg16(PLD_BASE + 0x8002) |
| #define PLD_ICUISTS_VECB_MASK (0xf000) |
| #define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK) |
| #define PLD_ICUISTS_ISN_MASK (0x07c0) |
| #define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK) |
| #define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104) |
| #define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106) |
| #define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108) |
| #define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a) |
| #define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114) |
| #define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118) |
| #define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a) |
| #define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c) |
| #define PLD_ICUCR_IEN (0x1000) |
| #define PLD_ICUCR_IREQ (0x0100) |
| #define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */ |
| #define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */ |
| #define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */ |
| #define PLD_ICUCR_ISMOD03 (0x0030) /* High level */ |
| #define PLD_ICUCR_ILEVEL0 (0x0000) |
| #define PLD_ICUCR_ILEVEL1 (0x0001) |
| #define PLD_ICUCR_ILEVEL2 (0x0002) |
| #define PLD_ICUCR_ILEVEL3 (0x0003) |
| #define PLD_ICUCR_ILEVEL4 (0x0004) |
| #define PLD_ICUCR_ILEVEL5 (0x0005) |
| #define PLD_ICUCR_ILEVEL6 (0x0006) |
| #define PLD_ICUCR_ILEVEL7 (0x0007) |
| |
| /* Power Control of MMC and CF */ |
| #define PLD_CPCR __reg16(PLD_BASE + 0x14000) |
| #define PLD_CPCR_CDP 0x0001 |
| |
| /* LED Control |
| * |
| * 1: DIP swich side |
| * 2: Reset switch side |
| */ |
| #define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) |
| #define PLD_IOLED_1_ON 0x001 |
| #define PLD_IOLED_1_OFF 0x000 |
| #define PLD_IOLED_2_ON 0x002 |
| #define PLD_IOLED_2_OFF 0x000 |
| |
| /* DIP Switch |
| * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) |
| * 1: - |
| * 2: - |
| * 3: - |
| */ |
| #define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) |
| #define PLD_IOSWSTS_IOSW2 0x0200 |
| #define PLD_IOSWSTS_IOSW1 0x0100 |
| #define PLD_IOSWSTS_IOWP0 0x0001 |
| |
| /* CRC */ |
| #define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) |
| #define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) |
| #define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) |
| #define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) |
| #define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) |
| #define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) |
| |
| /* RTC */ |
| #define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) |
| #define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) |
| #define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) |
| #define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) |
| #define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) |
| |
| /* SIM Card */ |
| #define PLD_SCCR __reg16(PLD_BASE + 0x38000) |
| #define PLD_SCMOD __reg16(PLD_BASE + 0x38004) |
| #define PLD_SCSTS __reg16(PLD_BASE + 0x38006) |
| #define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) |
| #define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) |
| #define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) |
| #define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) |
| |
| #endif /* _M32104UT_M32104UT_PLD_H */ |