| /* |
| * linux/fs/buffer.c |
| * |
| * Copyright (C) 1991, 1992, 2002 Linus Torvalds |
| */ |
| |
| /* |
| * Start bdflush() with kernel_thread not syscall - Paul Gortmaker, 12/95 |
| * |
| * Removed a lot of unnecessary code and simplified things now that |
| * the buffer cache isn't our primary cache - Andrew Tridgell 12/96 |
| * |
| * Speed up hash, lru, and free list operations. Use gfp() for allocating |
| * hash table, use SLAB cache for buffer heads. SMP threading. -DaveM |
| * |
| * Added 32k buffer block sizes - these are required older ARM systems. - RMK |
| * |
| * async buffer flushing, 1999 Andrea Arcangeli <andrea@suse.de> |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/kernel.h> |
| #include <linux/syscalls.h> |
| #include <linux/fs.h> |
| #include <linux/mm.h> |
| #include <linux/percpu.h> |
| #include <linux/slab.h> |
| #include <linux/smp_lock.h> |
| #include <linux/blkdev.h> |
| #include <linux/file.h> |
| #include <linux/quotaops.h> |
| #include <linux/highmem.h> |
| #include <linux/module.h> |
| #include <linux/writeback.h> |
| #include <linux/hash.h> |
| #include <linux/suspend.h> |
| #include <linux/buffer_head.h> |
| #include <linux/bio.h> |
| #include <linux/notifier.h> |
| #include <linux/cpu.h> |
| #include <linux/bitops.h> |
| #include <linux/mpage.h> |
| #include <linux/bit_spinlock.h> |
| |
| static int fsync_buffers_list(spinlock_t *lock, struct list_head *list); |
| static void invalidate_bh_lrus(void); |
| |
| #define BH_ENTRY(list) list_entry((list), struct buffer_head, b_assoc_buffers) |
| |
| inline void |
| init_buffer(struct buffer_head *bh, bh_end_io_t *handler, void *private) |
| { |
| bh->b_end_io = handler; |
| bh->b_private = private; |
| } |
| |
| static int sync_buffer(void *word) |
| { |
| struct block_device *bd; |
| struct buffer_head *bh |
| = container_of(word, struct buffer_head, b_state); |
| |
| smp_mb(); |
| bd = bh->b_bdev; |
| if (bd) |
| blk_run_address_space(bd->bd_inode->i_mapping); |
| io_schedule(); |
| return 0; |
| } |
| |
| void fastcall __lock_buffer(struct buffer_head *bh) |
| { |
| wait_on_bit_lock(&bh->b_state, BH_Lock, sync_buffer, |
| TASK_UNINTERRUPTIBLE); |
| } |
| EXPORT_SYMBOL(__lock_buffer); |
| |
| void fastcall unlock_buffer(struct buffer_head *bh) |
| { |
| clear_buffer_locked(bh); |
| smp_mb__after_clear_bit(); |
| wake_up_bit(&bh->b_state, BH_Lock); |
| } |
| |
| /* |
| * Block until a buffer comes unlocked. This doesn't stop it |
| * from becoming locked again - you have to lock it yourself |
| * if you want to preserve its state. |
| */ |
| void __wait_on_buffer(struct buffer_head * bh) |
| { |
| wait_on_bit(&bh->b_state, BH_Lock, sync_buffer, TASK_UNINTERRUPTIBLE); |
| } |
| |
| static void |
| __clear_page_buffers(struct page *page) |
| { |
| ClearPagePrivate(page); |
| set_page_private(page, 0); |
| page_cache_release(page); |
| } |
| |
| static void buffer_io_error(struct buffer_head *bh) |
| { |
| char b[BDEVNAME_SIZE]; |
| |
| printk(KERN_ERR "Buffer I/O error on device %s, logical block %Lu\n", |
| bdevname(bh->b_bdev, b), |
| (unsigned long long)bh->b_blocknr); |
| } |
| |
| /* |
| * Default synchronous end-of-IO handler.. Just mark it up-to-date and |
| * unlock the buffer. This is what ll_rw_block uses too. |
| */ |
| void end_buffer_read_sync(struct buffer_head *bh, int uptodate) |
| { |
| if (uptodate) { |
| set_buffer_uptodate(bh); |
| } else { |
| /* This happens, due to failed READA attempts. */ |
| clear_buffer_uptodate(bh); |
| } |
| unlock_buffer(bh); |
| put_bh(bh); |
| } |
| |
| void end_buffer_write_sync(struct buffer_head *bh, int uptodate) |
| { |
| char b[BDEVNAME_SIZE]; |
| |
| if (uptodate) { |
| set_buffer_uptodate(bh); |
| } else { |
| if (!buffer_eopnotsupp(bh) && printk_ratelimit()) { |
| buffer_io_error(bh); |
| printk(KERN_WARNING "lost page write due to " |
| "I/O error on %s\n", |
| bdevname(bh->b_bdev, b)); |
| } |
| set_buffer_write_io_error(bh); |
| clear_buffer_uptodate(bh); |
| } |
| unlock_buffer(bh); |
| put_bh(bh); |
| } |
| |
| /* |
| * Write out and wait upon all the dirty data associated with a block |
| * device via its mapping. Does not take the superblock lock. |
| */ |
| int sync_blockdev(struct block_device *bdev) |
| { |
| int ret = 0; |
| |
| if (bdev) |
| ret = filemap_write_and_wait(bdev->bd_inode->i_mapping); |
| return ret; |
| } |
| EXPORT_SYMBOL(sync_blockdev); |
| |
| /* |
| * Write out and wait upon all dirty data associated with this |
| * superblock. Filesystem data as well as the underlying block |
| * device. Takes the superblock lock. |
| */ |
| int fsync_super(struct super_block *sb) |
| { |
| sync_inodes_sb(sb, 0); |
| DQUOT_SYNC(sb); |
| lock_super(sb); |
| if (sb->s_dirt && sb->s_op->write_super) |
| sb->s_op->write_super(sb); |
| unlock_super(sb); |
| if (sb->s_op->sync_fs) |
| sb->s_op->sync_fs(sb, 1); |
| sync_blockdev(sb->s_bdev); |
| sync_inodes_sb(sb, 1); |
| |
| return sync_blockdev(sb->s_bdev); |
| } |
| |
| /* |
| * Write out and wait upon all dirty data associated with this |
| * device. Filesystem data as well as the underlying block |
| * device. Takes the superblock lock. |
| */ |
| int fsync_bdev(struct block_device *bdev) |
| { |
| struct super_block *sb = get_super(bdev); |
| if (sb) { |
| int res = fsync_super(sb); |
| drop_super(sb); |
| return res; |
| } |
| return sync_blockdev(bdev); |
| } |
| |
| /** |
| * freeze_bdev -- lock a filesystem and force it into a consistent state |
| * @bdev: blockdevice to lock |
| * |
| * This takes the block device bd_mount_sem to make sure no new mounts |
| * happen on bdev until thaw_bdev() is called. |
| * If a superblock is found on this device, we take the s_umount semaphore |
| * on it to make sure nobody unmounts until the snapshot creation is done. |
| */ |
| struct super_block *freeze_bdev(struct block_device *bdev) |
| { |
| struct super_block *sb; |
| |
| down(&bdev->bd_mount_sem); |
| sb = get_super(bdev); |
| if (sb && !(sb->s_flags & MS_RDONLY)) { |
| sb->s_frozen = SB_FREEZE_WRITE; |
| smp_wmb(); |
| |
| sync_inodes_sb(sb, 0); |
| DQUOT_SYNC(sb); |
| |
| lock_super(sb); |
| if (sb->s_dirt && sb->s_op->write_super) |
| sb->s_op->write_super(sb); |
| unlock_super(sb); |
| |
| if (sb->s_op->sync_fs) |
| sb->s_op->sync_fs(sb, 1); |
| |
| sync_blockdev(sb->s_bdev); |
| sync_inodes_sb(sb, 1); |
| |
| sb->s_frozen = SB_FREEZE_TRANS; |
| smp_wmb(); |
| |
| sync_blockdev(sb->s_bdev); |
| |
| if (sb->s_op->write_super_lockfs) |
| sb->s_op->write_super_lockfs(sb); |
| } |
| |
| sync_blockdev(bdev); |
| return sb; /* thaw_bdev releases s->s_umount and bd_mount_sem */ |
| } |
| EXPORT_SYMBOL(freeze_bdev); |
| |
| /** |
| * thaw_bdev -- unlock filesystem |
| * @bdev: blockdevice to unlock |
| * @sb: associated superblock |
| * |
| * Unlocks the filesystem and marks it writeable again after freeze_bdev(). |
| */ |
| void thaw_bdev(struct block_device *bdev, struct super_block *sb) |
| { |
| if (sb) { |
| BUG_ON(sb->s_bdev != bdev); |
| |
| if (sb->s_op->unlockfs) |
| sb->s_op->unlockfs(sb); |
| sb->s_frozen = SB_UNFROZEN; |
| smp_wmb(); |
| wake_up(&sb->s_wait_unfrozen); |
| drop_super(sb); |
| } |
| |
| up(&bdev->bd_mount_sem); |
| } |
| EXPORT_SYMBOL(thaw_bdev); |
| |
| /* |
| * sync everything. Start out by waking pdflush, because that writes back |
| * all queues in parallel. |
| */ |
| static void do_sync(unsigned long wait) |
| { |
| wakeup_pdflush(0); |
| sync_inodes(0); /* All mappings, inodes and their blockdevs */ |
| DQUOT_SYNC(NULL); |
| sync_supers(); /* Write the superblocks */ |
| sync_filesystems(0); /* Start syncing the filesystems */ |
| sync_filesystems(wait); /* Waitingly sync the filesystems */ |
| sync_inodes(wait); /* Mappings, inodes and blockdevs, again. */ |
| if (!wait) |
| printk("Emergency Sync complete\n"); |
| if (unlikely(laptop_mode)) |
| laptop_sync_completion(); |
| } |
| |
| asmlinkage long sys_sync(void) |
| { |
| do_sync(1); |
| return 0; |
| } |
| |
| void emergency_sync(void) |
| { |
| pdflush_operation(do_sync, 0); |
| } |
| |
| /* |
| * Generic function to fsync a file. |
| * |
| * filp may be NULL if called via the msync of a vma. |
| */ |
| |
| int file_fsync(struct file *filp, struct dentry *dentry, int datasync) |
| { |
| struct inode * inode = dentry->d_inode; |
| struct super_block * sb; |
| int ret, err; |
| |
| /* sync the inode to buffers */ |
| ret = write_inode_now(inode, 0); |
| |
| /* sync the superblock to buffers */ |
| sb = inode->i_sb; |
| lock_super(sb); |
| if (sb->s_op->write_super) |
| sb->s_op->write_super(sb); |
| unlock_super(sb); |
| |
| /* .. finally sync the buffers to disk */ |
| err = sync_blockdev(sb->s_bdev); |
| if (!ret) |
| ret = err; |
| return ret; |
| } |
| |
| static long do_fsync(unsigned int fd, int datasync) |
| { |
| struct file * file; |
| struct address_space *mapping; |
| int ret, err; |
| |
| ret = -EBADF; |
| file = fget(fd); |
| if (!file) |
| goto out; |
| |
| ret = -EINVAL; |
| if (!file->f_op || !file->f_op->fsync) { |
| /* Why? We can still call filemap_fdatawrite */ |
| goto out_putf; |
| } |
| |
| mapping = file->f_mapping; |
| |
| current->flags |= PF_SYNCWRITE; |
| ret = filemap_fdatawrite(mapping); |
| |
| /* |
| * We need to protect against concurrent writers, |
| * which could cause livelocks in fsync_buffers_list |
| */ |
| down(&mapping->host->i_sem); |
| err = file->f_op->fsync(file, file->f_dentry, datasync); |
| if (!ret) |
| ret = err; |
| up(&mapping->host->i_sem); |
| err = filemap_fdatawait(mapping); |
| if (!ret) |
| ret = err; |
| current->flags &= ~PF_SYNCWRITE; |
| |
| out_putf: |
| fput(file); |
| out: |
| return ret; |
| } |
| |
| asmlinkage long sys_fsync(unsigned int fd) |
| { |
| return do_fsync(fd, 0); |
| } |
| |
| asmlinkage long sys_fdatasync(unsigned int fd) |
| { |
| return do_fsync(fd, 1); |
| } |
| |
| /* |
| * Various filesystems appear to want __find_get_block to be non-blocking. |
| * But it's the page lock which protects the buffers. To get around this, |
| * we get exclusion from try_to_free_buffers with the blockdev mapping's |
| * private_lock. |
| * |
| * Hack idea: for the blockdev mapping, i_bufferlist_lock contention |
| * may be quite high. This code could TryLock the page, and if that |
| * succeeds, there is no need to take private_lock. (But if |
| * private_lock is contended then so is mapping->tree_lock). |
| */ |
| static struct buffer_head * |
| __find_get_block_slow(struct block_device *bdev, sector_t block) |
| { |
| struct inode *bd_inode = bdev->bd_inode; |
| struct address_space *bd_mapping = bd_inode->i_mapping; |
| struct buffer_head *ret = NULL; |
| pgoff_t index; |
| struct buffer_head *bh; |
| struct buffer_head *head; |
| struct page *page; |
| int all_mapped = 1; |
| |
| index = block >> (PAGE_CACHE_SHIFT - bd_inode->i_blkbits); |
| page = find_get_page(bd_mapping, index); |
| if (!page) |
| goto out; |
| |
| spin_lock(&bd_mapping->private_lock); |
| if (!page_has_buffers(page)) |
| goto out_unlock; |
| head = page_buffers(page); |
| bh = head; |
| do { |
| if (bh->b_blocknr == block) { |
| ret = bh; |
| get_bh(bh); |
| goto out_unlock; |
| } |
| if (!buffer_mapped(bh)) |
| all_mapped = 0; |
| bh = bh->b_this_page; |
| } while (bh != head); |
| |
| /* we might be here because some of the buffers on this page are |
| * not mapped. This is due to various races between |
| * file io on the block device and getblk. It gets dealt with |
| * elsewhere, don't buffer_error if we had some unmapped buffers |
| */ |
| if (all_mapped) { |
| printk("__find_get_block_slow() failed. " |
| "block=%llu, b_blocknr=%llu\n", |
| (unsigned long long)block, (unsigned long long)bh->b_blocknr); |
| printk("b_state=0x%08lx, b_size=%u\n", bh->b_state, bh->b_size); |
| printk("device blocksize: %d\n", 1 << bd_inode->i_blkbits); |
| } |
| out_unlock: |
| spin_unlock(&bd_mapping->private_lock); |
| page_cache_release(page); |
| out: |
| return ret; |
| } |
| |
| /* If invalidate_buffers() will trash dirty buffers, it means some kind |
| of fs corruption is going on. Trashing dirty data always imply losing |
| information that was supposed to be just stored on the physical layer |
| by the user. |
| |
| Thus invalidate_buffers in general usage is not allwowed to trash |
| dirty buffers. For example ioctl(FLSBLKBUF) expects dirty data to |
| be preserved. These buffers are simply skipped. |
| |
| We also skip buffers which are still in use. For example this can |
| happen if a userspace program is reading the block device. |
| |
| NOTE: In the case where the user removed a removable-media-disk even if |
| there's still dirty data not synced on disk (due a bug in the device driver |
| or due an error of the user), by not destroying the dirty buffers we could |
| generate corruption also on the next media inserted, thus a parameter is |
| necessary to handle this case in the most safe way possible (trying |
| to not corrupt also the new disk inserted with the data belonging to |
| the old now corrupted disk). Also for the ramdisk the natural thing |
| to do in order to release the ramdisk memory is to destroy dirty buffers. |
| |
| These are two special cases. Normal usage imply the device driver |
| to issue a sync on the device (without waiting I/O completion) and |
| then an invalidate_buffers call that doesn't trash dirty buffers. |
| |
| For handling cache coherency with the blkdev pagecache the 'update' case |
| is been introduced. It is needed to re-read from disk any pinned |
| buffer. NOTE: re-reading from disk is destructive so we can do it only |
| when we assume nobody is changing the buffercache under our I/O and when |
| we think the disk contains more recent information than the buffercache. |
| The update == 1 pass marks the buffers we need to update, the update == 2 |
| pass does the actual I/O. */ |
| void invalidate_bdev(struct block_device *bdev, int destroy_dirty_buffers) |
| { |
| invalidate_bh_lrus(); |
| /* |
| * FIXME: what about destroy_dirty_buffers? |
| * We really want to use invalidate_inode_pages2() for |
| * that, but not until that's cleaned up. |
| */ |
| invalidate_inode_pages(bdev->bd_inode->i_mapping); |
| } |
| |
| /* |
| * Kick pdflush then try to free up some ZONE_NORMAL memory. |
| */ |
| static void free_more_memory(void) |
| { |
| struct zone **zones; |
| pg_data_t *pgdat; |
| |
| wakeup_pdflush(1024); |
| yield(); |
| |
| for_each_pgdat(pgdat) { |
| zones = pgdat->node_zonelists[gfp_zone(GFP_NOFS)].zones; |
| if (*zones) |
| try_to_free_pages(zones, GFP_NOFS); |
| } |
| } |
| |
| /* |
| * I/O completion handler for block_read_full_page() - pages |
| * which come unlocked at the end of I/O. |
| */ |
| static void end_buffer_async_read(struct buffer_head *bh, int uptodate) |
| { |
| unsigned long flags; |
| struct buffer_head *first; |
| struct buffer_head *tmp; |
| struct page *page; |
| int page_uptodate = 1; |
| |
| BUG_ON(!buffer_async_read(bh)); |
| |
| page = bh->b_page; |
| if (uptodate) { |
| set_buffer_uptodate(bh); |
| } else { |
| clear_buffer_uptodate(bh); |
| if (printk_ratelimit()) |
| buffer_io_error(bh); |
| SetPageError(page); |
| } |
| |
| /* |
| * Be _very_ careful from here on. Bad things can happen if |
| * two buffer heads end IO at almost the same time and both |
| * decide that the page is now completely done. |
| */ |
| first = page_buffers(page); |
| local_irq_save(flags); |
| bit_spin_lock(BH_Uptodate_Lock, &first->b_state); |
| clear_buffer_async_read(bh); |
| unlock_buffer(bh); |
| tmp = bh; |
| do { |
| if (!buffer_uptodate(tmp)) |
| page_uptodate = 0; |
| if (buffer_async_read(tmp)) { |
| BUG_ON(!buffer_locked(tmp)); |
| goto still_busy; |
| } |
| tmp = tmp->b_this_page; |
| } while (tmp != bh); |
| bit_spin_unlock(BH_Uptodate_Lock, &first->b_state); |
| local_irq_restore(flags); |
| |
| /* |
| * If none of the buffers had errors and they are all |
| * uptodate then we can set the page uptodate. |
| */ |
| if (page_uptodate && !PageError(page)) |
| SetPageUptodate(page); |
| unlock_page(page); |
| return; |
| |
| still_busy: |
| bit_spin_unlock(BH_Uptodate_Lock, &first->b_state); |
| local_irq_restore(flags); |
| return; |
| } |
| |
| /* |
| * Completion handler for block_write_full_page() - pages which are unlocked |
| * during I/O, and which have PageWriteback cleared upon I/O completion. |
| */ |
| void end_buffer_async_write(struct buffer_head *bh, int uptodate) |
| { |
| char b[BDEVNAME_SIZE]; |
| unsigned long flags; |
| struct buffer_head *first; |
| struct buffer_head *tmp; |
| struct page *page; |
| |
| BUG_ON(!buffer_async_write(bh)); |
| |
| page = bh->b_page; |
| if (uptodate) { |
| set_buffer_uptodate(bh); |
| } else { |
| if (printk_ratelimit()) { |
| buffer_io_error(bh); |
| printk(KERN_WARNING "lost page write due to " |
| "I/O error on %s\n", |
| bdevname(bh->b_bdev, b)); |
| } |
| set_bit(AS_EIO, &page->mapping->flags); |
| clear_buffer_uptodate(bh); |
| SetPageError(page); |
| } |
| |
| first = page_buffers(page); |
| local_irq_save(flags); |
| bit_spin_lock(BH_Uptodate_Lock, &first->b_state); |
| |
| clear_buffer_async_write(bh); |
| unlock_buffer(bh); |
| tmp = bh->b_this_page; |
| while (tmp != bh) { |
| if (buffer_async_write(tmp)) { |
| BUG_ON(!buffer_locked(tmp)); |
| goto still_busy; |
| } |
| tmp = tmp->b_this_page; |
| } |
| bit_spin_unlock(BH_Uptodate_Lock, &first->b_state); |
| local_irq_restore(flags); |
| end_page_writeback(page); |
| return; |
| |
| still_busy: |
| bit_spin_unlock(BH_Uptodate_Lock, &first->b_state); |
| local_irq_restore(flags); |
| return; |
| } |
| |
| /* |
| * If a page's buffers are under async readin (end_buffer_async_read |
| * completion) then there is a possibility that another thread of |
| * control could lock one of the buffers after it has completed |
| * but while some of the other buffers have not completed. This |
| * locked buffer would confuse end_buffer_async_read() into not unlocking |
| * the page. So the absence of BH_Async_Read tells end_buffer_async_read() |
| * that this buffer is not under async I/O. |
| * |
| * The page comes unlocked when it has no locked buffer_async buffers |
| * left. |
| * |
| * PageLocked prevents anyone starting new async I/O reads any of |
| * the buffers. |
| * |
| * PageWriteback is used to prevent simultaneous writeout of the same |
| * page. |
| * |
| * PageLocked prevents anyone from starting writeback of a page which is |
| * under read I/O (PageWriteback is only ever set against a locked page). |
| */ |
| static void mark_buffer_async_read(struct buffer_head *bh) |
| { |
| bh->b_end_io = end_buffer_async_read; |
| set_buffer_async_read(bh); |
| } |
| |
| void mark_buffer_async_write(struct buffer_head *bh) |
| { |
| bh->b_end_io = end_buffer_async_write; |
| set_buffer_async_write(bh); |
| } |
| EXPORT_SYMBOL(mark_buffer_async_write); |
| |
| |
| /* |
| * fs/buffer.c contains helper functions for buffer-backed address space's |
| * fsync functions. A common requirement for buffer-based filesystems is |
| * that certain data from the backing blockdev needs to be written out for |
| * a successful fsync(). For example, ext2 indirect blocks need to be |
| * written back and waited upon before fsync() returns. |
| * |
| * The functions mark_buffer_inode_dirty(), fsync_inode_buffers(), |
| * inode_has_buffers() and invalidate_inode_buffers() are provided for the |
| * management of a list of dependent buffers at ->i_mapping->private_list. |
| * |
| * Locking is a little subtle: try_to_free_buffers() will remove buffers |
| * from their controlling inode's queue when they are being freed. But |
| * try_to_free_buffers() will be operating against the *blockdev* mapping |
| * at the time, not against the S_ISREG file which depends on those buffers. |
| * So the locking for private_list is via the private_lock in the address_space |
| * which backs the buffers. Which is different from the address_space |
| * against which the buffers are listed. So for a particular address_space, |
| * mapping->private_lock does *not* protect mapping->private_list! In fact, |
| * mapping->private_list will always be protected by the backing blockdev's |
| * ->private_lock. |
| * |
| * Which introduces a requirement: all buffers on an address_space's |
| * ->private_list must be from the same address_space: the blockdev's. |
| * |
| * address_spaces which do not place buffers at ->private_list via these |
| * utility functions are free to use private_lock and private_list for |
| * whatever they want. The only requirement is that list_empty(private_list) |
| * be true at clear_inode() time. |
| * |
| * FIXME: clear_inode should not call invalidate_inode_buffers(). The |
| * filesystems should do that. invalidate_inode_buffers() should just go |
| * BUG_ON(!list_empty). |
| * |
| * FIXME: mark_buffer_dirty_inode() is a data-plane operation. It should |
| * take an address_space, not an inode. And it should be called |
| * mark_buffer_dirty_fsync() to clearly define why those buffers are being |
| * queued up. |
| * |
| * FIXME: mark_buffer_dirty_inode() doesn't need to add the buffer to the |
| * list if it is already on a list. Because if the buffer is on a list, |
| * it *must* already be on the right one. If not, the filesystem is being |
| * silly. This will save a ton of locking. But first we have to ensure |
| * that buffers are taken *off* the old inode's list when they are freed |
| * (presumably in truncate). That requires careful auditing of all |
| * filesystems (do it inside bforget()). It could also be done by bringing |
| * b_inode back. |
| */ |
| |
| /* |
| * The buffer's backing address_space's private_lock must be held |
| */ |
| static inline void __remove_assoc_queue(struct buffer_head *bh) |
| { |
| list_del_init(&bh->b_assoc_buffers); |
| } |
| |
| int inode_has_buffers(struct inode *inode) |
| { |
| return !list_empty(&inode->i_data.private_list); |
| } |
| |
| /* |
| * osync is designed to support O_SYNC io. It waits synchronously for |
| * all already-submitted IO to complete, but does not queue any new |
| * writes to the disk. |
| * |
| * To do O_SYNC writes, just queue the buffer writes with ll_rw_block as |
| * you dirty the buffers, and then use osync_inode_buffers to wait for |
| * completion. Any other dirty buffers which are not yet queued for |
| * write will not be flushed to disk by the osync. |
| */ |
| static int osync_buffers_list(spinlock_t *lock, struct list_head *list) |
| { |
| struct buffer_head *bh; |
| struct list_head *p; |
| int err = 0; |
| |
| spin_lock(lock); |
| repeat: |
| list_for_each_prev(p, list) { |
| bh = BH_ENTRY(p); |
| if (buffer_locked(bh)) { |
| get_bh(bh); |
| spin_unlock(lock); |
| wait_on_buffer(bh); |
| if (!buffer_uptodate(bh)) |
| err = -EIO; |
| brelse(bh); |
| spin_lock(lock); |
| goto repeat; |
| } |
| } |
| spin_unlock(lock); |
| return err; |
| } |
| |
| /** |
| * sync_mapping_buffers - write out and wait upon a mapping's "associated" |
| * buffers |
| * @mapping: the mapping which wants those buffers written |
| * |
| * Starts I/O against the buffers at mapping->private_list, and waits upon |
| * that I/O. |
| * |
| * Basically, this is a convenience function for fsync(). |
| * @mapping is a file or directory which needs those buffers to be written for |
| * a successful fsync(). |
| */ |
| int sync_mapping_buffers(struct address_space *mapping) |
| { |
| struct address_space *buffer_mapping = mapping->assoc_mapping; |
| |
| if (buffer_mapping == NULL || list_empty(&mapping->private_list)) |
| return 0; |
| |
| return fsync_buffers_list(&buffer_mapping->private_lock, |
| &mapping->private_list); |
| } |
| EXPORT_SYMBOL(sync_mapping_buffers); |
| |
| /* |
| * Called when we've recently written block `bblock', and it is known that |
| * `bblock' was for a buffer_boundary() buffer. This means that the block at |
| * `bblock + 1' is probably a dirty indirect block. Hunt it down and, if it's |
| * dirty, schedule it for IO. So that indirects merge nicely with their data. |
| */ |
| void write_boundary_block(struct block_device *bdev, |
| sector_t bblock, unsigned blocksize) |
| { |
| struct buffer_head *bh = __find_get_block(bdev, bblock + 1, blocksize); |
| if (bh) { |
| if (buffer_dirty(bh)) |
| ll_rw_block(WRITE, 1, &bh); |
| put_bh(bh); |
| } |
| } |
| |
| void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode) |
| { |
| struct address_space *mapping = inode->i_mapping; |
| struct address_space *buffer_mapping = bh->b_page->mapping; |
| |
| mark_buffer_dirty(bh); |
| if (!mapping->assoc_mapping) { |
| mapping->assoc_mapping = buffer_mapping; |
| } else { |
| if (mapping->assoc_mapping != buffer_mapping) |
| BUG(); |
| } |
| if (list_empty(&bh->b_assoc_buffers)) { |
| spin_lock(&buffer_mapping->private_lock); |
| list_move_tail(&bh->b_assoc_buffers, |
| &mapping->private_list); |
| spin_unlock(&buffer_mapping->private_lock); |
| } |
| } |
| EXPORT_SYMBOL(mark_buffer_dirty_inode); |
| |
| /* |
| * Add a page to the dirty page list. |
| * |
| * It is a sad fact of life that this function is called from several places |
| * deeply under spinlocking. It may not sleep. |
| * |
| * If the page has buffers, the uptodate buffers are set dirty, to preserve |
| * dirty-state coherency between the page and the buffers. It the page does |
| * not have buffers then when they are later attached they will all be set |
| * dirty. |
| * |
| * The buffers are dirtied before the page is dirtied. There's a small race |
| * window in which a writepage caller may see the page cleanness but not the |
| * buffer dirtiness. That's fine. If this code were to set the page dirty |
| * before the buffers, a concurrent writepage caller could clear the page dirty |
| * bit, see a bunch of clean buffers and we'd end up with dirty buffers/clean |
| * page on the dirty page list. |
| * |
| * We use private_lock to lock against try_to_free_buffers while using the |
| * page's buffer list. Also use this to protect against clean buffers being |
| * added to the page after it was set dirty. |
| * |
| * FIXME: may need to call ->reservepage here as well. That's rather up to the |
| * address_space though. |
| */ |
| int __set_page_dirty_buffers(struct page *page) |
| { |
| struct address_space * const mapping = page->mapping; |
| |
| spin_lock(&mapping->private_lock); |
| if (page_has_buffers(page)) { |
| struct buffer_head *head = page_buffers(page); |
| struct buffer_head *bh = head; |
| |
| do { |
| set_buffer_dirty(bh); |
| bh = bh->b_this_page; |
| } while (bh != head); |
| } |
| spin_unlock(&mapping->private_lock); |
| |
| if (!TestSetPageDirty(page)) { |
| write_lock_irq(&mapping->tree_lock); |
| if (page->mapping) { /* Race with truncate? */ |
| if (mapping_cap_account_dirty(mapping)) |
| inc_page_state(nr_dirty); |
| radix_tree_tag_set(&mapping->page_tree, |
| page_index(page), |
| PAGECACHE_TAG_DIRTY); |
| } |
| write_unlock_irq(&mapping->tree_lock); |
| __mark_inode_dirty(mapping->host, I_DIRTY_PAGES); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(__set_page_dirty_buffers); |
| |
| /* |
| * Write out and wait upon a list of buffers. |
| * |
| * We have conflicting pressures: we want to make sure that all |
| * initially dirty buffers get waited on, but that any subsequently |
| * dirtied buffers don't. After all, we don't want fsync to last |
| * forever if somebody is actively writing to the file. |
| * |
| * Do this in two main stages: first we copy dirty buffers to a |
| * temporary inode list, queueing the writes as we go. Then we clean |
| * up, waiting for those writes to complete. |
| * |
| * During this second stage, any subsequent updates to the file may end |
| * up refiling the buffer on the original inode's dirty list again, so |
| * there is a chance we will end up with a buffer queued for write but |
| * not yet completed on that list. So, as a final cleanup we go through |
| * the osync code to catch these locked, dirty buffers without requeuing |
| * any newly dirty buffers for write. |
| */ |
| static int fsync_buffers_list(spinlock_t *lock, struct list_head *list) |
| { |
| struct buffer_head *bh; |
| struct list_head tmp; |
| int err = 0, err2; |
| |
| INIT_LIST_HEAD(&tmp); |
| |
| spin_lock(lock); |
| while (!list_empty(list)) { |
| bh = BH_ENTRY(list->next); |
| list_del_init(&bh->b_assoc_buffers); |
| if (buffer_dirty(bh) || buffer_locked(bh)) { |
| list_add(&bh->b_assoc_buffers, &tmp); |
| if (buffer_dirty(bh)) { |
| get_bh(bh); |
| spin_unlock(lock); |
| /* |
| * Ensure any pending I/O completes so that |
| * ll_rw_block() actually writes the current |
| * contents - it is a noop if I/O is still in |
| * flight on potentially older contents. |
| */ |
| ll_rw_block(SWRITE, 1, &bh); |
| brelse(bh); |
| spin_lock(lock); |
| } |
| } |
| } |
| |
| while (!list_empty(&tmp)) { |
| bh = BH_ENTRY(tmp.prev); |
| __remove_assoc_queue(bh); |
| get_bh(bh); |
| spin_unlock(lock); |
| wait_on_buffer(bh); |
| if (!buffer_uptodate(bh)) |
| err = -EIO; |
| brelse(bh); |
| spin_lock(lock); |
| } |
| |
| spin_unlock(lock); |
| err2 = osync_buffers_list(lock, list); |
| if (err) |
| return err; |
| else |
| return err2; |
| } |
| |
| /* |
| * Invalidate any and all dirty buffers on a given inode. We are |
| * probably unmounting the fs, but that doesn't mean we have already |
| * done a sync(). Just drop the buffers from the inode list. |
| * |
| * NOTE: we take the inode's blockdev's mapping's private_lock. Which |
| * assumes that all the buffers are against the blockdev. Not true |
| * for reiserfs. |
| */ |
| void invalidate_inode_buffers(struct inode *inode) |
| { |
| if (inode_has_buffers(inode)) { |
| struct address_space *mapping = &inode->i_data; |
| struct list_head *list = &mapping->private_list; |
| struct address_space *buffer_mapping = mapping->assoc_mapping; |
| |
| spin_lock(&buffer_mapping->private_lock); |
| while (!list_empty(list)) |
| __remove_assoc_queue(BH_ENTRY(list->next)); |
| spin_unlock(&buffer_mapping->private_lock); |
| } |
| } |
| |
| /* |
| * Remove any clean buffers from the inode's buffer list. This is called |
| * when we're trying to free the inode itself. Those buffers can pin it. |
| * |
| * Returns true if all buffers were removed. |
| */ |
| int remove_inode_buffers(struct inode *inode) |
| { |
| int ret = 1; |
| |
| if (inode_has_buffers(inode)) { |
| struct address_space *mapping = &inode->i_data; |
| struct list_head *list = &mapping->private_list; |
| struct address_space *buffer_mapping = mapping->assoc_mapping; |
| |
| spin_lock(&buffer_mapping->private_lock); |
| while (!list_empty(list)) { |
| struct buffer_head *bh = BH_ENTRY(list->next); |
| if (buffer_dirty(bh)) { |
| ret = 0; |
| break; |
| } |
| __remove_assoc_queue(bh); |
| } |
| spin_unlock(&buffer_mapping->private_lock); |
| } |
| return ret; |
| } |
| |
| /* |
| * Create the appropriate buffers when given a page for data area and |
| * the size of each buffer.. Use the bh->b_this_page linked list to |
| * follow the buffers created. Return NULL if unable to create more |
| * buffers. |
| * |
| * The retry flag is used to differentiate async IO (paging, swapping) |
| * which may not fail from ordinary buffer allocations. |
| */ |
| struct buffer_head *alloc_page_buffers(struct page *page, unsigned long size, |
| int retry) |
| { |
| struct buffer_head *bh, *head; |
| long offset; |
| |
| try_again: |
| head = NULL; |
| offset = PAGE_SIZE; |
| while ((offset -= size) >= 0) { |
| bh = alloc_buffer_head(GFP_NOFS); |
| if (!bh) |
| goto no_grow; |
| |
| bh->b_bdev = NULL; |
| bh->b_this_page = head; |
| bh->b_blocknr = -1; |
| head = bh; |
| |
| bh->b_state = 0; |
| atomic_set(&bh->b_count, 0); |
| bh->b_size = size; |
| |
| /* Link the buffer to its page */ |
| set_bh_page(bh, page, offset); |
| |
| bh->b_end_io = NULL; |
| } |
| return head; |
| /* |
| * In case anything failed, we just free everything we got. |
| */ |
| no_grow: |
| if (head) { |
| do { |
| bh = head; |
| head = head->b_this_page; |
| free_buffer_head(bh); |
| } while (head); |
| } |
| |
| /* |
| * Return failure for non-async IO requests. Async IO requests |
| * are not allowed to fail, so we have to wait until buffer heads |
| * become available. But we don't want tasks sleeping with |
| * partially complete buffers, so all were released above. |
| */ |
| if (!retry) |
| return NULL; |
| |
| /* We're _really_ low on memory. Now we just |
| * wait for old buffer heads to become free due to |
| * finishing IO. Since this is an async request and |
| * the reserve list is empty, we're sure there are |
| * async buffer heads in use. |
| */ |
| free_more_memory(); |
| goto try_again; |
| } |
| EXPORT_SYMBOL_GPL(alloc_page_buffers); |
| |
| static inline void |
| link_dev_buffers(struct page *page, struct buffer_head *head) |
| { |
| struct buffer_head *bh, *tail; |
| |
| bh = head; |
| do { |
| tail = bh; |
| bh = bh->b_this_page; |
| } while (bh); |
| tail->b_this_page = head; |
| attach_page_buffers(page, head); |
| } |
| |
| /* |
| * Initialise the state of a blockdev page's buffers. |
| */ |
| static void |
| init_page_buffers(struct page *page, struct block_device *bdev, |
| sector_t block, int size) |
| { |
| struct buffer_head *head = page_buffers(page); |
| struct buffer_head *bh = head; |
| int uptodate = PageUptodate(page); |
| |
| do { |
| if (!buffer_mapped(bh)) { |
| init_buffer(bh, NULL, NULL); |
| bh->b_bdev = bdev; |
| bh->b_blocknr = block; |
| if (uptodate) |
| set_buffer_uptodate(bh); |
| set_buffer_mapped(bh); |
| } |
| block++; |
| bh = bh->b_this_page; |
| } while (bh != head); |
| } |
| |
| /* |
| * Create the page-cache page that contains the requested block. |
| * |
| * This is user purely for blockdev mappings. |
| */ |
| static struct page * |
| grow_dev_page(struct block_device *bdev, sector_t block, |
| pgoff_t index, int size) |
| { |
| struct inode *inode = bdev->bd_inode; |
| struct page *page; |
| struct buffer_head *bh; |
| |
| page = find_or_create_page(inode->i_mapping, index, GFP_NOFS); |
| if (!page) |
| return NULL; |
| |
| if (!PageLocked(page)) |
| BUG(); |
| |
| if (page_has_buffers(page)) { |
| bh = page_buffers(page); |
| if (bh->b_size == size) { |
| init_page_buffers(page, bdev, block, size); |
| return page; |
| } |
| if (!try_to_free_buffers(page)) |
| goto failed; |
| } |
| |
| /* |
| * Allocate some buffers for this page |
| */ |
| bh = alloc_page_buffers(page, size, 0); |
| if (!bh) |
| goto failed; |
| |
| /* |
| * Link the page to the buffers and initialise them. Take the |
| * lock to be atomic wrt __find_get_block(), which does not |
| * run under the page lock. |
| */ |
| spin_lock(&inode->i_mapping->private_lock); |
| link_dev_buffers(page, bh); |
| init_page_buffers(page, bdev, block, size); |
| spin_unlock(&inode->i_mapping->private_lock); |
| return page; |
| |
| failed: |
| BUG(); |
| unlock_page(page); |
| page_cache_release(page); |
| return NULL; |
| } |
| |
| /* |
| * Create buffers for the specified block device block's page. If |
| * that page was dirty, the buffers are set dirty also. |
| * |
| * Except that's a bug. Attaching dirty buffers to a dirty |
| * blockdev's page can result in filesystem corruption, because |
| * some of those buffers may be aliases of filesystem data. |
| * grow_dev_page() will go BUG() if this happens. |
| */ |
| static inline int |
| grow_buffers(struct block_device *bdev, sector_t block, int size) |
| { |
| struct page *page; |
| pgoff_t index; |
| int sizebits; |
| |
| sizebits = -1; |
| do { |
| sizebits++; |
| } while ((size << sizebits) < PAGE_SIZE); |
| |
| index = block >> sizebits; |
| block = index << sizebits; |
| |
| /* Create a page with the proper size buffers.. */ |
| page = grow_dev_page(bdev, block, index, size); |
| if (!page) |
| return 0; |
| unlock_page(page); |
| page_cache_release(page); |
| return 1; |
| } |
| |
| static struct buffer_head * |
| __getblk_slow(struct block_device *bdev, sector_t block, int size) |
| { |
| /* Size must be multiple of hard sectorsize */ |
| if (unlikely(size & (bdev_hardsect_size(bdev)-1) || |
| (size < 512 || size > PAGE_SIZE))) { |
| printk(KERN_ERR "getblk(): invalid block size %d requested\n", |
| size); |
| printk(KERN_ERR "hardsect size: %d\n", |
| bdev_hardsect_size(bdev)); |
| |
| dump_stack(); |
| return NULL; |
| } |
| |
| for (;;) { |
| struct buffer_head * bh; |
| |
| bh = __find_get_block(bdev, block, size); |
| if (bh) |
| return bh; |
| |
| if (!grow_buffers(bdev, block, size)) |
| free_more_memory(); |
| } |
| } |
| |
| /* |
| * The relationship between dirty buffers and dirty pages: |
| * |
| * Whenever a page has any dirty buffers, the page's dirty bit is set, and |
| * the page is tagged dirty in its radix tree. |
| * |
| * At all times, the dirtiness of the buffers represents the dirtiness of |
| * subsections of the page. If the page has buffers, the page dirty bit is |
| * merely a hint about the true dirty state. |
| * |
| * When a page is set dirty in its entirety, all its buffers are marked dirty |
| * (if the page has buffers). |
| * |
| * When a buffer is marked dirty, its page is dirtied, but the page's other |
| * buffers are not. |
| * |
| * Also. When blockdev buffers are explicitly read with bread(), they |
| * individually become uptodate. But their backing page remains not |
| * uptodate - even if all of its buffers are uptodate. A subsequent |
| * block_read_full_page() against that page will discover all the uptodate |
| * buffers, will set the page uptodate and will perform no I/O. |
| */ |
| |
| /** |
| * mark_buffer_dirty - mark a buffer_head as needing writeout |
| * @bh: the buffer_head to mark dirty |
| * |
| * mark_buffer_dirty() will set the dirty bit against the buffer, then set its |
| * backing page dirty, then tag the page as dirty in its address_space's radix |
| * tree and then attach the address_space's inode to its superblock's dirty |
| * inode list. |
| * |
| * mark_buffer_dirty() is atomic. It takes bh->b_page->mapping->private_lock, |
| * mapping->tree_lock and the global inode_lock. |
| */ |
| void fastcall mark_buffer_dirty(struct buffer_head *bh) |
| { |
| if (!buffer_dirty(bh) && !test_set_buffer_dirty(bh)) |
| __set_page_dirty_nobuffers(bh->b_page); |
| } |
| |
| /* |
| * Decrement a buffer_head's reference count. If all buffers against a page |
| * have zero reference count, are clean and unlocked, and if the page is clean |
| * and unlocked then try_to_free_buffers() may strip the buffers from the page |
| * in preparation for freeing it (sometimes, rarely, buffers are removed from |
| * a page but it ends up not being freed, and buffers may later be reattached). |
| */ |
| void __brelse(struct buffer_head * buf) |
| { |
| if (atomic_read(&buf->b_count)) { |
| put_bh(buf); |
| return; |
| } |
| printk(KERN_ERR "VFS: brelse: Trying to free free buffer\n"); |
| WARN_ON(1); |
| } |
| |
| /* |
| * bforget() is like brelse(), except it discards any |
| * potentially dirty data. |
| */ |
| void __bforget(struct buffer_head *bh) |
| { |
| clear_buffer_dirty(bh); |
| if (!list_empty(&bh->b_assoc_buffers)) { |
| struct address_space *buffer_mapping = bh->b_page->mapping; |
| |
| spin_lock(&buffer_mapping->private_lock); |
| list_del_init(&bh->b_assoc_buffers); |
| spin_unlock(&buffer_mapping->private_lock); |
| } |
| __brelse(bh); |
| } |
| |
| static struct buffer_head *__bread_slow(struct buffer_head *bh) |
| { |
| lock_buffer(bh); |
| if (buffer_uptodate(bh)) { |
| unlock_buffer(bh); |
| return bh; |
| } else { |
| get_bh(bh); |
| bh->b_end_io = end_buffer_read_sync; |
| submit_bh(READ, bh); |
| wait_on_buffer(bh); |
| if (buffer_uptodate(bh)) |
| return bh; |
| } |
| brelse(bh); |
| return NULL; |
| } |
| |
| /* |
| * Per-cpu buffer LRU implementation. To reduce the cost of __find_get_block(). |
| * The bhs[] array is sorted - newest buffer is at bhs[0]. Buffers have their |
| * refcount elevated by one when they're in an LRU. A buffer can only appear |
| * once in a particular CPU's LRU. A single buffer can be present in multiple |
| * CPU's LRUs at the same time. |
| * |
| * This is a transparent caching front-end to sb_bread(), sb_getblk() and |
| * sb_find_get_block(). |
| * |
| * The LRUs themselves only need locking against invalidate_bh_lrus. We use |
| * a local interrupt disable for that. |
| */ |
| |
| #define BH_LRU_SIZE 8 |
| |
| struct bh_lru { |
| struct buffer_head *bhs[BH_LRU_SIZE]; |
| }; |
| |
| static DEFINE_PER_CPU(struct bh_lru, bh_lrus) = {{ NULL }}; |
| |
| #ifdef CONFIG_SMP |
| #define bh_lru_lock() local_irq_disable() |
| #define bh_lru_unlock() local_irq_enable() |
| #else |
| #define bh_lru_lock() preempt_disable() |
| #define bh_lru_unlock() preempt_enable() |
| #endif |
| |
| static inline void check_irqs_on(void) |
| { |
| #ifdef irqs_disabled |
| BUG_ON(irqs_disabled()); |
| #endif |
| } |
| |
| /* |
| * The LRU management algorithm is dopey-but-simple. Sorry. |
| */ |
| static void bh_lru_install(struct buffer_head *bh) |
| { |
| struct buffer_head *evictee = NULL; |
| struct bh_lru *lru; |
| |
| check_irqs_on(); |
| bh_lru_lock(); |
| lru = &__get_cpu_var(bh_lrus); |
| if (lru->bhs[0] != bh) { |
| struct buffer_head *bhs[BH_LRU_SIZE]; |
| int in; |
| int out = 0; |
| |
| get_bh(bh); |
| bhs[out++] = bh; |
| for (in = 0; in < BH_LRU_SIZE; in++) { |
| struct buffer_head *bh2 = lru->bhs[in]; |
| |
| if (bh2 == bh) { |
| __brelse(bh2); |
| } else { |
| if (out >= BH_LRU_SIZE) { |
| BUG_ON(evictee != NULL); |
| evictee = bh2; |
| } else { |
| bhs[out++] = bh2; |
| } |
| } |
| } |
| while (out < BH_LRU_SIZE) |
| bhs[out++] = NULL; |
| memcpy(lru->bhs, bhs, sizeof(bhs)); |
| } |
| bh_lru_unlock(); |
| |
| if (evictee) |
| __brelse(evictee); |
| } |
| |
| /* |
| * Look up the bh in this cpu's LRU. If it's there, move it to the head. |
| */ |
| static inline struct buffer_head * |
| lookup_bh_lru(struct block_device *bdev, sector_t block, int size) |
| { |
| struct buffer_head *ret = NULL; |
| struct bh_lru *lru; |
| int i; |
| |
| check_irqs_on(); |
| bh_lru_lock(); |
| lru = &__get_cpu_var(bh_lrus); |
| for (i = 0; i < BH_LRU_SIZE; i++) { |
| struct buffer_head *bh = lru->bhs[i]; |
| |
| if (bh && bh->b_bdev == bdev && |
| bh->b_blocknr == block && bh->b_size == size) { |
| if (i) { |
| while (i) { |
| lru->bhs[i] = lru->bhs[i - 1]; |
| i--; |
| } |
| lru->bhs[0] = bh; |
| } |
| get_bh(bh); |
| ret = bh; |
| break; |
| } |
| } |
| bh_lru_unlock(); |
| return ret; |
| } |
| |
| /* |
| * Perform a pagecache lookup for the matching buffer. If it's there, refresh |
| * it in the LRU and mark it as accessed. If it is not present then return |
| * NULL |
| */ |
| struct buffer_head * |
| __find_get_block(struct block_device *bdev, sector_t block, int size) |
| { |
| struct buffer_head *bh = lookup_bh_lru(bdev, block, size); |
| |
| if (bh == NULL) { |
| bh = __find_get_block_slow(bdev, block); |
| if (bh) |
| bh_lru_install(bh); |
| } |
| if (bh) |
| touch_buffer(bh); |
| return bh; |
| } |
| EXPORT_SYMBOL(__find_get_block); |
| |
| /* |
| * __getblk will locate (and, if necessary, create) the buffer_head |
| * which corresponds to the passed block_device, block and size. The |
| * returned buffer has its reference count incremented. |
| * |
| * __getblk() cannot fail - it just keeps trying. If you pass it an |
| * illegal block number, __getblk() will happily return a buffer_head |
| * which represents the non-existent block. Very weird. |
| * |
| * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers() |
| * attempt is failing. FIXME, perhaps? |
| */ |
| struct buffer_head * |
| __getblk(struct block_device *bdev, sector_t block, int size) |
| { |
| struct buffer_head *bh = __find_get_block(bdev, block, size); |
| |
| might_sleep(); |
| if (bh == NULL) |
| bh = __getblk_slow(bdev, block, size); |
| return bh; |
| } |
| EXPORT_SYMBOL(__getblk); |
| |
| /* |
| * Do async read-ahead on a buffer.. |
| */ |
| void __breadahead(struct block_device *bdev, sector_t block, int size) |
| { |
| struct buffer_head *bh = __getblk(bdev, block, size); |
| if (likely(bh)) { |
| ll_rw_block(READA, 1, &bh); |
| brelse(bh); |
| } |
| } |
| EXPORT_SYMBOL(__breadahead); |
| |
| /** |
| * __bread() - reads a specified block and returns the bh |
| * @bdev: the block_device to read from |
| * @block: number of block |
| * @size: size (in bytes) to read |
| * |
| * Reads a specified block, and returns buffer head that contains it. |
| * It returns NULL if the block was unreadable. |
| */ |
| struct buffer_head * |
| __bread(struct block_device *bdev, sector_t block, int size) |
| { |
| struct buffer_head *bh = __getblk(bdev, block, size); |
| |
| if (likely(bh) && !buffer_uptodate(bh)) |
| bh = __bread_slow(bh); |
| return bh; |
| } |
| EXPORT_SYMBOL(__bread); |
| |
| /* |
| * invalidate_bh_lrus() is called rarely - but not only at unmount. |
| * This doesn't race because it runs in each cpu either in irq |
| * or with preempt disabled. |
| */ |
| static void invalidate_bh_lru(void *arg) |
| { |
| struct bh_lru *b = &get_cpu_var(bh_lrus); |
| int i; |
| |
| for (i = 0; i < BH_LRU_SIZE; i++) { |
| brelse(b->bhs[i]); |
| b->bhs[i] = NULL; |
| } |
| put_cpu_var(bh_lrus); |
| } |
| |
| static void invalidate_bh_lrus(void) |
| { |
| on_each_cpu(invalidate_bh_lru, NULL, 1, 1); |
| } |
| |
| void set_bh_page(struct buffer_head *bh, |
| struct page *page, unsigned long offset) |
| { |
| bh->b_page = page; |
| if (offset >= PAGE_SIZE) |
| BUG(); |
| if (PageHighMem(page)) |
| /* |
| * This catches illegal uses and preserves the offset: |
| */ |
| bh->b_data = (char *)(0 + offset); |
| else |
| bh->b_data = page_address(page) + offset; |
| } |
| EXPORT_SYMBOL(set_bh_page); |
| |
| /* |
| * Called when truncating a buffer on a page completely. |
| */ |
| static inline void discard_buffer(struct buffer_head * bh) |
| { |
| lock_buffer(bh); |
| clear_buffer_dirty(bh); |
| bh->b_bdev = NULL; |
| clear_buffer_mapped(bh); |
| clear_buffer_req(bh); |
| clear_buffer_new(bh); |
| clear_buffer_delay(bh); |
| unlock_buffer(bh); |
| } |
| |
| /** |
| * try_to_release_page() - release old fs-specific metadata on a page |
| * |
| * @page: the page which the kernel is trying to free |
| * @gfp_mask: memory allocation flags (and I/O mode) |
| * |
| * The address_space is to try to release any data against the page |
| * (presumably at page->private). If the release was successful, return `1'. |
| * Otherwise return zero. |
| * |
| * The @gfp_mask argument specifies whether I/O may be performed to release |
| * this page (__GFP_IO), and whether the call may block (__GFP_WAIT). |
| * |
| * NOTE: @gfp_mask may go away, and this function may become non-blocking. |
| */ |
| int try_to_release_page(struct page *page, gfp_t gfp_mask) |
| { |
| struct address_space * const mapping = page->mapping; |
| |
| BUG_ON(!PageLocked(page)); |
| if (PageWriteback(page)) |
| return 0; |
| |
| if (mapping && mapping->a_ops->releasepage) |
| return mapping->a_ops->releasepage(page, gfp_mask); |
| return try_to_free_buffers(page); |
| } |
| EXPORT_SYMBOL(try_to_release_page); |
| |
| /** |
| * block_invalidatepage - invalidate part of all of a buffer-backed page |
| * |
| * @page: the page which is affected |
| * @offset: the index of the truncation point |
| * |
| * block_invalidatepage() is called when all or part of the page has become |
| * invalidatedby a truncate operation. |
| * |
| * block_invalidatepage() does not have to release all buffers, but it must |
| * ensure that no dirty buffer is left outside @offset and that no I/O |
| * is underway against any of the blocks which are outside the truncation |
| * point. Because the caller is about to free (and possibly reuse) those |
| * blocks on-disk. |
| */ |
| int block_invalidatepage(struct page *page, unsigned long offset) |
| { |
| struct buffer_head *head, *bh, *next; |
| unsigned int curr_off = 0; |
| int ret = 1; |
| |
| BUG_ON(!PageLocked(page)); |
| if (!page_has_buffers(page)) |
| goto out; |
| |
| head = page_buffers(page); |
| bh = head; |
| do { |
| unsigned int next_off = curr_off + bh->b_size; |
| next = bh->b_this_page; |
| |
| /* |
| * is this block fully invalidated? |
| */ |
| if (offset <= curr_off) |
| discard_buffer(bh); |
| curr_off = next_off; |
| bh = next; |
| } while (bh != head); |
| |
| /* |
| * We release buffers only if the entire page is being invalidated. |
| * The get_block cached value has been unconditionally invalidated, |
| * so real IO is not possible anymore. |
| */ |
| if (offset == 0) |
| ret = try_to_release_page(page, 0); |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(block_invalidatepage); |
| |
| int do_invalidatepage(struct page *page, unsigned long offset) |
| { |
| int (*invalidatepage)(struct page *, unsigned long); |
| invalidatepage = page->mapping->a_ops->invalidatepage; |
| if (invalidatepage == NULL) |
| invalidatepage = block_invalidatepage; |
| return (*invalidatepage)(page, offset); |
| } |
| |
| /* |
| * We attach and possibly dirty the buffers atomically wrt |
| * __set_page_dirty_buffers() via private_lock. try_to_free_buffers |
| * is already excluded via the page lock. |
| */ |
| void create_empty_buffers(struct page *page, |
| unsigned long blocksize, unsigned long b_state) |
| { |
| struct buffer_head *bh, *head, *tail; |
| |
| head = alloc_page_buffers(page, blocksize, 1); |
| bh = head; |
| do { |
| bh->b_state |= b_state; |
| tail = bh; |
| bh = bh->b_this_page; |
| } while (bh); |
| tail->b_this_page = head; |
| |
| spin_lock(&page->mapping->private_lock); |
| if (PageUptodate(page) || PageDirty(page)) { |
| bh = head; |
| do { |
| if (PageDirty(page)) |
| set_buffer_dirty(bh); |
| if (PageUptodate(page)) |
| set_buffer_uptodate(bh); |
| bh = bh->b_this_page; |
| } while (bh != head); |
| } |
| attach_page_buffers(page, head); |
| spin_unlock(&page->mapping->private_lock); |
| } |
| EXPORT_SYMBOL(create_empty_buffers); |
| |
| /* |
| * We are taking a block for data and we don't want any output from any |
| * buffer-cache aliases starting from return from that function and |
| * until the moment when something will explicitly mark the buffer |
| * dirty (hopefully that will not happen until we will free that block ;-) |
| * We don't even need to mark it not-uptodate - nobody can expect |
| * anything from a newly allocated buffer anyway. We used to used |
| * unmap_buffer() for such invalidation, but that was wrong. We definitely |
| * don't want to mark the alias unmapped, for example - it would confuse |
| * anyone who might pick it with bread() afterwards... |
| * |
| * Also.. Note that bforget() doesn't lock the buffer. So there can |
| * be writeout I/O going on against recently-freed buffers. We don't |
| * wait on that I/O in bforget() - it's more efficient to wait on the I/O |
| * only if we really need to. That happens here. |
| */ |
| void unmap_underlying_metadata(struct block_device *bdev, sector_t block) |
| { |
| struct buffer_head *old_bh; |
| |
| might_sleep(); |
| |
| old_bh = __find_get_block_slow(bdev, block); |
| if (old_bh) { |
| clear_buffer_dirty(old_bh); |
| wait_on_buffer(old_bh); |
| clear_buffer_req(old_bh); |
| __brelse(old_bh); |
| } |
| } |
| EXPORT_SYMBOL(unmap_underlying_metadata); |
| |
| /* |
| * NOTE! All mapped/uptodate combinations are valid: |
| * |
| * Mapped Uptodate Meaning |
| * |
| * No No "unknown" - must do get_block() |
| * No Yes "hole" - zero-filled |
| * Yes No "allocated" - allocated on disk, not read in |
| * Yes Yes "valid" - allocated and up-to-date in memory. |
| * |
| * "Dirty" is valid only with the last case (mapped+uptodate). |
| */ |
| |
| /* |
| * While block_write_full_page is writing back the dirty buffers under |
| * the page lock, whoever dirtied the buffers may decide to clean them |
| * again at any time. We handle that by only looking at the buffer |
| * state inside lock_buffer(). |
| * |
| * If block_write_full_page() is called for regular writeback |
| * (wbc->sync_mode == WB_SYNC_NONE) then it will redirty a page which has a |
| * locked buffer. This only can happen if someone has written the buffer |
| * directly, with submit_bh(). At the address_space level PageWriteback |
| * prevents this contention from occurring. |
| */ |
| static int __block_write_full_page(struct inode *inode, struct page *page, |
| get_block_t *get_block, struct writeback_control *wbc) |
| { |
| int err; |
| sector_t block; |
| sector_t last_block; |
| struct buffer_head *bh, *head; |
| int nr_underway = 0; |
| |
| BUG_ON(!PageLocked(page)); |
| |
| last_block = (i_size_read(inode) - 1) >> inode->i_blkbits; |
| |
| if (!page_has_buffers(page)) { |
| create_empty_buffers(page, 1 << inode->i_blkbits, |
| (1 << BH_Dirty)|(1 << BH_Uptodate)); |
| } |
| |
| /* |
| * Be very careful. We have no exclusion from __set_page_dirty_buffers |
| * here, and the (potentially unmapped) buffers may become dirty at |
| * any time. If a buffer becomes dirty here after we've inspected it |
| * then we just miss that fact, and the page stays dirty. |
| * |
| * Buffers outside i_size may be dirtied by __set_page_dirty_buffers; |
| * handle that here by just cleaning them. |
| */ |
| |
| block = page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits); |
| head = page_buffers(page); |
| bh = head; |
| |
| /* |
| * Get all the dirty buffers mapped to disk addresses and |
| * handle any aliases from the underlying blockdev's mapping. |
| */ |
| do { |
| if (block > last_block) { |
| /* |
| * mapped buffers outside i_size will occur, because |
| * this page can be outside i_size when there is a |
| * truncate in progress. |
| */ |
| /* |
| * The buffer was zeroed by block_write_full_page() |
| */ |
| clear_buffer_dirty(bh); |
| set_buffer_uptodate(bh); |
| } else if (!buffer_mapped(bh) && buffer_dirty(bh)) { |
| err = get_block(inode, block, bh, 1); |
| if (err) |
| goto recover; |
| if (buffer_new(bh)) { |
| /* blockdev mappings never come here */ |
| clear_buffer_new(bh); |
| unmap_underlying_metadata(bh->b_bdev, |
| bh->b_blocknr); |
| } |
| } |
| bh = bh->b_this_page; |
| block++; |
| } while (bh != head); |
| |
| do { |
| if (!buffer_mapped(bh)) |
| continue; |
| /* |
| * If it's a fully non-blocking write attempt and we cannot |
| * lock the buffer then redirty the page. Note that this can |
| * potentially cause a busy-wait loop from pdflush and kswapd |
| * activity, but those code paths have their own higher-level |
| * throttling. |
| */ |
| if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) { |
| lock_buffer(bh); |
| } else if (test_set_buffer_locked(bh)) { |
| redirty_page_for_writepage(wbc, page); |
| continue; |
| } |
| if (test_clear_buffer_dirty(bh)) { |
| mark_buffer_async_write(bh); |
| } else { |
| unlock_buffer(bh); |
| } |
| } while ((bh = bh->b_this_page) != head); |
| |
| /* |
| * The page and its buffers are protected by PageWriteback(), so we can |
| * drop the bh refcounts early. |
| */ |
| BUG_ON(PageWriteback(page)); |
| set_page_writeback(page); |
| |
| do { |
| struct buffer_head *next = bh->b_this_page; |
| if (buffer_async_write(bh)) { |
| submit_bh(WRITE, bh); |
| nr_underway++; |
| } |
| bh = next; |
| } while (bh != head); |
| unlock_page(page); |
| |
| err = 0; |
| done: |
| if (nr_underway == 0) { |
| /* |
| * The page was marked dirty, but the buffers were |
| * clean. Someone wrote them back by hand with |
| * ll_rw_block/submit_bh. A rare case. |
| */ |
| int uptodate = 1; |
| do { |
| if (!buffer_uptodate(bh)) { |
| uptodate = 0; |
| break; |
| } |
| bh = bh->b_this_page; |
| } while (bh != head); |
| if (uptodate) |
| SetPageUptodate(page); |
| end_page_writeback(page); |
| /* |
| * The page and buffer_heads can be released at any time from |
| * here on. |
| */ |
| wbc->pages_skipped++; /* We didn't write this page */ |
| } |
| return err; |
| |
| recover: |
| /* |
| * ENOSPC, or some other error. We may already have added some |
| * blocks to the file, so we need to write these out to avoid |
| * exposing stale data. |
| * The page is currently locked and not marked for writeback |
| */ |
| bh = head; |
| /* Recovery: lock and submit the mapped buffers */ |
| do { |
| if (buffer_mapped(bh) && buffer_dirty(bh)) { |
| lock_buffer(bh); |
| mark_buffer_async_write(bh); |
| } else { |
| /* |
| * The buffer may have been set dirty during |
| * attachment to a dirty page. |
| */ |
| clear_buffer_dirty(bh); |
| } |
| } while ((bh = bh->b_this_page) != head); |
| SetPageError(page); |
| BUG_ON(PageWriteback(page)); |
| set_page_writeback(page); |
| unlock_page(page); |
| do { |
| struct buffer_head *next = bh->b_this_page; |
| if (buffer_async_write(bh)) { |
| clear_buffer_dirty(bh); |
| submit_bh(WRITE, bh); |
| nr_underway++; |
| } |
| bh = next; |
| } while (bh != head); |
| goto done; |
| } |
| |
| static int __block_prepare_write(struct inode *inode, struct page *page, |
| unsigned from, unsigned to, get_block_t *get_block) |
| { |
| unsigned block_start, block_end; |
| sector_t block; |
| int err = 0; |
| unsigned blocksize, bbits; |
| struct buffer_head *bh, *head, *wait[2], **wait_bh=wait; |
| |
| BUG_ON(!PageLocked(page)); |
| BUG_ON(from > PAGE_CACHE_SIZE); |
| BUG_ON(to > PAGE_CACHE_SIZE); |
| BUG_ON(from > to); |
| |
| blocksize = 1 << inode->i_blkbits; |
| if (!page_has_buffers(page)) |
| create_empty_buffers(page, blocksize, 0); |
| head = page_buffers(page); |
| |
| bbits = inode->i_blkbits; |
| block = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits); |
| |
| for(bh = head, block_start = 0; bh != head || !block_start; |
| block++, block_start=block_end, bh = bh->b_this_page) { |
| block_end = block_start + blocksize; |
| if (block_end <= from || block_start >= to) { |
| if (PageUptodate(page)) { |
| if (!buffer_uptodate(bh)) |
| set_buffer_uptodate(bh); |
| } |
| continue; |
| } |
| if (buffer_new(bh)) |
| clear_buffer_new(bh); |
| if (!buffer_mapped(bh)) { |
| err = get_block(inode, block, bh, 1); |
| if (err) |
| break; |
| if (buffer_new(bh)) { |
| unmap_underlying_metadata(bh->b_bdev, |
| bh->b_blocknr); |
| if (PageUptodate(page)) { |
| set_buffer_uptodate(bh); |
| continue; |
| } |
| if (block_end > to || block_start < from) { |
| void *kaddr; |
| |
| kaddr = kmap_atomic(page, KM_USER0); |
| if (block_end > to) |
| memset(kaddr+to, 0, |
| block_end-to); |
| if (block_start < from) |
| memset(kaddr+block_start, |
| 0, from-block_start); |
| flush_dcache_page(page); |
| kunmap_atomic(kaddr, KM_USER0); |
| } |
| continue; |
| } |
| } |
| if (PageUptodate(page)) { |
| if (!buffer_uptodate(bh)) |
| set_buffer_uptodate(bh); |
| continue; |
| } |
| if (!buffer_uptodate(bh) && !buffer_delay(bh) && |
| (block_start < from || block_end > to)) { |
| ll_rw_block(READ, 1, &bh); |
| *wait_bh++=bh; |
| } |
| } |
| /* |
| * If we issued read requests - let them complete. |
| */ |
| while(wait_bh > wait) { |
| wait_on_buffer(*--wait_bh); |
| if (!buffer_uptodate(*wait_bh)) |
| err = -EIO; |
| } |
| if (!err) { |
| bh = head; |
| do { |
| if (buffer_new(bh)) |
| clear_buffer_new(bh); |
| } while ((bh = bh->b_this_page) != head); |
| return 0; |
| } |
| /* Error case: */ |
| /* |
| * Zero out any newly allocated blocks to avoid exposing stale |
| * data. If BH_New is set, we know that the block was newly |
| * allocated in the above loop. |
| */ |
| bh = head; |
| block_start = 0; |
| do { |
| block_end = block_start+blocksize; |
| if (block_end <= from) |
| goto next_bh; |
| if (block_start >= to) |
| break; |
| if (buffer_new(bh)) { |
| void *kaddr; |
| |
| clear_buffer_new(bh); |
| kaddr = kmap_atomic(page, KM_USER0); |
| memset(kaddr+block_start, 0, bh->b_size); |
| kunmap_atomic(kaddr, KM_USER0); |
| set_buffer_uptodate(bh); |
| mark_buffer_dirty(bh); |
| } |
| next_bh: |
| block_start = block_end; |
| bh = bh->b_this_page; |
| } while (bh != head); |
| return err; |
| } |
| |
| static int __block_commit_write(struct inode *inode, struct page *page, |
| unsigned from, unsigned to) |
| { |
| unsigned block_start, block_end; |
| int partial = 0; |
| unsigned blocksize; |
| struct buffer_head *bh, *head; |
| |
| blocksize = 1 << inode->i_blkbits; |
| |
| for(bh = head = page_buffers(page), block_start = 0; |
| bh != head || !block_start; |
| block_start=block_end, bh = bh->b_this_page) { |
| block_end = block_start + blocksize; |
| if (block_end <= from || block_start >= to) { |
| if (!buffer_uptodate(bh)) |
| partial = 1; |
| } else { |
| set_buffer_uptodate(bh); |
| mark_buffer_dirty(bh); |
| } |
| } |
| |
| /* |
| * If this is a partial write which happened to make all buffers |
| * uptodate then we can optimize away a bogus readpage() for |
| * the next read(). Here we 'discover' whether the page went |
| * uptodate as a result of this (potentially partial) write. |
| */ |
| if (!partial) |
| SetPageUptodate(page); |
| return 0; |
| } |
| |
| /* |
| * Generic "read page" function for block devices that have the normal |
| * get_block functionality. This is most of the block device filesystems. |
| * Reads the page asynchronously --- the unlock_buffer() and |
| * set/clear_buffer_uptodate() functions propagate buffer state into the |
| * page struct once IO has completed. |
| */ |
| int block_read_full_page(struct page *page, get_block_t *get_block) |
| { |
| struct inode *inode = page->mapping->host; |
| sector_t iblock, lblock; |
| struct buffer_head *bh, *head, *arr[MAX_BUF_PER_PAGE]; |
| unsigned int blocksize; |
| int nr, i; |
| int fully_mapped = 1; |
| |
| BUG_ON(!PageLocked(page)); |
| blocksize = 1 << inode->i_blkbits; |
| if (!page_has_buffers(page)) |
| create_empty_buffers(page, blocksize, 0); |
| head = page_buffers(page); |
| |
| iblock = (sector_t)page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits); |
| lblock = (i_size_read(inode)+blocksize-1) >> inode->i_blkbits; |
| bh = head; |
| nr = 0; |
| i = 0; |
| |
| do { |
| if (buffer_uptodate(bh)) |
| continue; |
| |
| if (!buffer_mapped(bh)) { |
| int err = 0; |
| |
| fully_mapped = 0; |
| if (iblock < lblock) { |
| err = get_block(inode, iblock, bh, 0); |
| if (err) |
| SetPageError(page); |
| } |
| if (!buffer_mapped(bh)) { |
| void *kaddr = kmap_atomic(page, KM_USER0); |
| memset(kaddr + i * blocksize, 0, blocksize); |
| flush_dcache_page(page); |
| kunmap_atomic(kaddr, KM_USER0); |
| if (!err) |
| set_buffer_uptodate(bh); |
| continue; |
| } |
| /* |
| * get_block() might have updated the buffer |
| * synchronously |
| */ |
| if (buffer_uptodate(bh)) |
| continue; |
| } |
| arr[nr++] = bh; |
| } while (i++, iblock++, (bh = bh->b_this_page) != head); |
| |
| if (fully_mapped) |
| SetPageMappedToDisk(page); |
| |
| if (!nr) { |
| /* |
| * All buffers are uptodate - we can set the page uptodate |
| * as well. But not if get_block() returned an error. |
| */ |
| if (!PageError(page)) |
| SetPageUptodate(page); |
| unlock_page(page); |
| return 0; |
| } |
| |
| /* Stage two: lock the buffers */ |
| for (i = 0; i < nr; i++) { |
| bh = arr[i]; |
| lock_buffer(bh); |
| mark_buffer_async_read(bh); |
| } |
| |
| /* |
| * Stage 3: start the IO. Check for uptodateness |
| * inside the buffer lock in case another process reading |
| * the underlying blockdev brought it uptodate (the sct fix). |
| */ |
| for (i = 0; i < nr; i++) { |
| bh = arr[i]; |
| if (buffer_uptodate(bh)) |
| end_buffer_async_read(bh, 1); |
| else |
| submit_bh(READ, bh); |
| } |
| return 0; |
| } |
| |
| /* utility function for filesystems that need to do work on expanding |
| * truncates. Uses prepare/commit_write to allow the filesystem to |
| * deal with the hole. |
| */ |
| static int __generic_cont_expand(struct inode *inode, loff_t size, |
| pgoff_t index, unsigned int offset) |
| { |
| struct address_space *mapping = inode->i_mapping; |
| struct page *page; |
| unsigned long limit; |
| int err; |
| |
| err = -EFBIG; |
| limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur; |
| if (limit != RLIM_INFINITY && size > (loff_t)limit) { |
| send_sig(SIGXFSZ, current, 0); |
| goto out; |
| } |
| if (size > inode->i_sb->s_maxbytes) |
| goto out; |
| |
| err = -ENOMEM; |
| page = grab_cache_page(mapping, index); |
| if (!page) |
| goto out; |
| err = mapping->a_ops->prepare_write(NULL, page, offset, offset); |
| if (err) { |
| /* |
| * ->prepare_write() may have instantiated a few blocks |
| * outside i_size. Trim these off again. |
| */ |
| unlock_page(page); |
| page_cache_release(page); |
| vmtruncate(inode, inode->i_size); |
| goto out; |
| } |
| |
| err = mapping->a_ops->commit_write(NULL, page, offset, offset); |
| |
| unlock_page(page); |
| page_cache_release(page); |
| if (err > 0) |
| err = 0; |
| out: |
| return err; |
| } |
| |
| int generic_cont_expand(struct inode *inode, loff_t size) |
| { |
| pgoff_t index; |
| unsigned int offset; |
| |
| offset = (size & (PAGE_CACHE_SIZE - 1)); /* Within page */ |
| |
| /* ugh. in prepare/commit_write, if from==to==start of block, we |
| ** skip the prepare. make sure we never send an offset for the start |
| ** of a block |
| */ |
| if ((offset & (inode->i_sb->s_blocksize - 1)) == 0) { |
| /* caller must handle this extra byte. */ |
| offset++; |
| } |
| index = size >> PAGE_CACHE_SHIFT; |
| |
| return __generic_cont_expand(inode, size, index, offset); |
| } |
| |
| int generic_cont_expand_simple(struct inode *inode, loff_t size) |
| { |
| loff_t pos = size - 1; |
| pgoff_t index = pos >> PAGE_CACHE_SHIFT; |
| unsigned int offset = (pos & (PAGE_CACHE_SIZE - 1)) + 1; |
| |
| /* prepare/commit_write can handle even if from==to==start of block. */ |
| return __generic_cont_expand(inode, size, index, offset); |
| } |
| |
| /* |
| * For moronic filesystems that do not allow holes in file. |
| * We may have to extend the file. |
| */ |
| |
| int cont_prepare_write(struct page *page, unsigned offset, |
| unsigned to, get_block_t *get_block, loff_t *bytes) |
| { |
| struct address_space *mapping = page->mapping; |
| struct inode *inode = mapping->host; |
| struct page *new_page; |
| pgoff_t pgpos; |
| long status; |
| unsigned zerofrom; |
| unsigned blocksize = 1 << inode->i_blkbits; |
| void *kaddr; |
| |
| while(page->index > (pgpos = *bytes>>PAGE_CACHE_SHIFT)) { |
| status = -ENOMEM; |
| new_page = grab_cache_page(mapping, pgpos); |
| if (!new_page) |
| goto out; |
| /* we might sleep */ |
| if (*bytes>>PAGE_CACHE_SHIFT != pgpos) { |
| unlock_page(new_page); |
| page_cache_release(new_page); |
| continue; |
| } |
| zerofrom = *bytes & ~PAGE_CACHE_MASK; |
| if (zerofrom & (blocksize-1)) { |
| *bytes |= (blocksize-1); |
| (*bytes)++; |
| } |
| status = __block_prepare_write(inode, new_page, zerofrom, |
| PAGE_CACHE_SIZE, get_block); |
| if (status) |
| goto out_unmap; |
| kaddr = kmap_atomic(new_page, KM_USER0); |
| memset(kaddr+zerofrom, 0, PAGE_CACHE_SIZE-zerofrom); |
| flush_dcache_page(new_page); |
| kunmap_atomic(kaddr, KM_USER0); |
| generic_commit_write(NULL, new_page, zerofrom, PAGE_CACHE_SIZE); |
| unlock_page(new_page); |
| page_cache_release(new_page); |
| } |
| |
| if (page->index < pgpos) { |
| /* completely inside the area */ |
| zerofrom = offset; |
| } else { |
| /* page covers the boundary, find the boundary offset */ |
| zerofrom = *bytes & ~PAGE_CACHE_MASK; |
| |
| /* if we will expand the thing last block will be filled */ |
| if (to > zerofrom && (zerofrom & (blocksize-1))) { |
| *bytes |= (blocksize-1); |
| (*bytes)++; |
| } |
| |
| /* starting below the boundary? Nothing to zero out */ |
| if (offset <= zerofrom) |
| zerofrom = offset; |
| } |
| status = __block_prepare_write(inode, page, zerofrom, to, get_block); |
| if (status) |
| goto out1; |
| if (zerofrom < offset) { |
| kaddr = kmap_atomic(page, KM_USER0); |
| memset(kaddr+zerofrom, 0, offset-zerofrom); |
| flush_dcache_page(page); |
| kunmap_atomic(kaddr, KM_USER0); |
| __block_commit_write(inode, page, zerofrom, offset); |
| } |
| return 0; |
| out1: |
| ClearPageUptodate(page); |
| return status; |
| |
| out_unmap: |
| ClearPageUptodate(new_page); |
| unlock_page(new_page); |
| page_cache_release(new_page); |
| out: |
| return status; |
| } |
| |
| int block_prepare_write(struct page *page, unsigned from, unsigned to, |
| get_block_t *get_block) |
| { |
| struct inode *inode = page->mapping->host; |
| int err = __block_prepare_write(inode, page, from, to, get_block); |
| if (err) |
| ClearPageUptodate(page); |
| return err; |
| } |
| |
| int block_commit_write(struct page *page, unsigned from, unsigned to) |
| { |
| struct inode *inode = page->mapping->host; |
| __block_commit_write(inode,page,from,to); |
| return 0; |
| } |
| |
| int generic_commit_write(struct file *file, struct page *page, |
| unsigned from, unsigned to) |
| { |
| struct inode *inode = page->mapping->host; |
| loff_t pos = ((loff_t)page->index << PAGE_CACHE_SHIFT) + to; |
| __block_commit_write(inode,page,from,to); |
| /* |
| * No need to use i_size_read() here, the i_size |
| * cannot change under us because we hold i_sem. |
| */ |
| if (pos > inode->i_size) { |
| i_size_write(inode, pos); |
| mark_inode_dirty(inode); |
| } |
| return 0; |
| } |
| |
| |
| /* |
| * nobh_prepare_write()'s prereads are special: the buffer_heads are freed |
| * immediately, while under the page lock. So it needs a special end_io |
| * handler which does not touch the bh after unlocking it. |
| * |
| * Note: unlock_buffer() sort-of does touch the bh after unlocking it, but |
| * a race there is benign: unlock_buffer() only use the bh's address for |
| * hashing after unlocking the buffer, so it doesn't actually touch the bh |
| * itself. |
| */ |
| static void end_buffer_read_nobh(struct buffer_head *bh, int uptodate) |
| { |
| if (uptodate) { |
| set_buffer_uptodate(bh); |
| } else { |
| /* This happens, due to failed READA attempts. */ |
| clear_buffer_uptodate(bh); |
| } |
| unlock_buffer(bh); |
| } |
| |
| /* |
| * On entry, the page is fully not uptodate. |
| * On exit the page is fully uptodate in the areas outside (from,to) |
| */ |
| int nobh_prepare_write(struct page *page, unsigned from, unsigned to, |
| get_block_t *get_block) |
| { |
| struct inode *inode = page->mapping->host; |
| const unsigned blkbits = inode->i_blkbits; |
| const unsigned blocksize = 1 << blkbits; |
| struct buffer_head map_bh; |
| struct buffer_head *read_bh[MAX_BUF_PER_PAGE]; |
| unsigned block_in_page; |
| unsigned block_start; |
| sector_t block_in_file; |
| char *kaddr; |
| int nr_reads = 0; |
| int i; |
| int ret = 0; |
| int is_mapped_to_disk = 1; |
| int dirtied_it = 0; |
| |
| if (PageMappedToDisk(page)) |
| return 0; |
| |
| block_in_file = (sector_t)page->index << (PAGE_CACHE_SHIFT - blkbits); |
| map_bh.b_page = page; |
| |
| /* |
| * We loop across all blocks in the page, whether or not they are |
| * part of the affected region. This is so we can discover if the |
| * page is fully mapped-to-disk. |
| */ |
| for (block_start = 0, block_in_page = 0; |
| block_start < PAGE_CACHE_SIZE; |
| block_in_page++, block_start += blocksize) { |
| unsigned block_end = block_start + blocksize; |
| int create; |
| |
| map_bh.b_state = 0; |
| create = 1; |
| if (block_start >= to) |
| create = 0; |
| ret = get_block(inode, block_in_file + block_in_page, |
| &map_bh, create); |
| if (ret) |
| goto failed; |
| if (!buffer_mapped(&map_bh)) |
| is_mapped_to_disk = 0; |
| if (buffer_new(&map_bh)) |
| unmap_underlying_metadata(map_bh.b_bdev, |
| map_bh.b_blocknr); |
| if (PageUptodate(page)) |
| continue; |
| if (buffer_new(&map_bh) || !buffer_mapped(&map_bh)) { |
| kaddr = kmap_atomic(page, KM_USER0); |
| if (block_start < from) { |
| memset(kaddr+block_start, 0, from-block_start); |
| dirtied_it = 1; |
| } |
| if (block_end > to) { |
| memset(kaddr + to, 0, block_end - to); |
| dirtied_it = 1; |
| } |
| flush_dcache_page(page); |
| kunmap_atomic(kaddr, KM_USER0); |
| continue; |
| } |
| if (buffer_uptodate(&map_bh)) |
| continue; /* reiserfs does this */ |
| if (block_start < from || block_end > to) { |
| struct buffer_head *bh = alloc_buffer_head(GFP_NOFS); |
| |
| if (!bh) { |
| ret = -ENOMEM; |
| goto failed; |
| } |
| bh->b_state = map_bh.b_state; |
| atomic_set(&bh->b_count, 0); |
| bh->b_this_page = NULL; |
| bh->b_page = page; |
| bh->b_blocknr = map_bh.b_blocknr; |
| bh->b_size = blocksize; |
| bh->b_data = (char *)(long)block_start; |
| bh->b_bdev = map_bh.b_bdev; |
| bh->b_private = NULL; |
| read_bh[nr_reads++] = bh; |
| } |
| } |
| |
| if (nr_reads) { |
| struct buffer_head *bh; |
| |
| /* |
| * The page is locked, so these buffers are protected from |
| * any VM or truncate activity. Hence we don't need to care |
| * for the buffer_head refcounts. |
| */ |
| for (i = 0; i < nr_reads; i++) { |
| bh = read_bh[i]; |
| lock_buffer(bh); |
| bh->b_end_io = end_buffer_read_nobh; |
| submit_bh(READ, bh); |
| } |
| for (i = 0; i < nr_reads; i++) { |
| bh = read_bh[i]; |
| wait_on_buffer(bh); |
| if (!buffer_uptodate(bh)) |
| ret = -EIO; |
| free_buffer_head(bh); |
| read_bh[i] = NULL; |
| } |
| if (ret) |
| goto failed; |
| } |
| |
| if (is_mapped_to_disk) |
| SetPageMappedToDisk(page); |
| SetPageUptodate(page); |
| |
| /* |
| * Setting the page dirty here isn't necessary for the prepare_write |
| * function - commit_write will do that. But if/when this function is |
| * used within the pagefault handler to ensure that all mmapped pages |
| * have backing space in the filesystem, we will need to dirty the page |
| * if its contents were altered. |
| */ |
| if (dirtied_it) |
| set_page_dirty(page); |
| |
| return 0; |
| |
| failed: |
| for (i = 0; i < nr_reads; i++) { |
| if (read_bh[i]) |
| free_buffer_head(read_bh[i]); |
| } |
| |
| /* |
| * Error recovery is pretty slack. Clear the page and mark it dirty |
| * so we'll later zero out any blocks which _were_ allocated. |
| */ |
| kaddr = kmap_atomic(page, KM_USER0); |
| memset(kaddr, 0, PAGE_CACHE_SIZE); |
| kunmap_atomic(kaddr, KM_USER0); |
| SetPageUptodate(page); |
| set_page_dirty(page); |
| return ret; |
| } |
| EXPORT_SYMBOL(nobh_prepare_write); |
| |
| int nobh_commit_write(struct file *file, struct page *page, |
| unsigned from, unsigned to) |
| { |
| struct inode *inode = page->mapping->host; |
| loff_t pos = ((loff_t)page->index << PAGE_CACHE_SHIFT) + to; |
| |
| set_page_dirty(page); |
| if (pos > inode->i_size) { |
| i_size_write(inode, pos); |
| mark_inode_dirty(inode); |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(nobh_commit_write); |
| |
| /* |
| * nobh_writepage() - based on block_full_write_page() except |
| * that it tries to operate without attaching bufferheads to |
| * the page. |
| */ |
| int nobh_writepage(struct page *page, get_block_t *get_block, |
| struct writeback_control *wbc) |
| { |
| struct inode * const inode = page->mapping->host; |
| loff_t i_size = i_size_read(inode); |
| const pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT; |
| unsigned offset; |
| void *kaddr; |
| int ret; |
| |
| /* Is the page fully inside i_size? */ |
| if (page->index < end_index) |
| goto out; |
| |
| /* Is the page fully outside i_size? (truncate in progress) */ |
| offset = i_size & (PAGE_CACHE_SIZE-1); |
| if (page->index >= end_index+1 || !offset) { |
| /* |
| * The page may have dirty, unmapped buffers. For example, |
| * they may have been added in ext3_writepage(). Make them |
| * freeable here, so the page does not leak. |
| */ |
| #if 0 |
| /* Not really sure about this - do we need this ? */ |
| if (page->mapping->a_ops->invalidatepage) |
| page->mapping->a_ops->invalidatepage(page, offset); |
| #endif |
| unlock_page(page); |
| return 0; /* don't care */ |
| } |
| |
| /* |
| * The page straddles i_size. It must be zeroed out on each and every |
| * writepage invocation because it may be mmapped. "A file is mapped |
| * in multiples of the page size. For a file that is not a multiple of |
| * the page size, the remaining memory is zeroed when mapped, and |
| * writes to that region are not written out to the file." |
| */ |
| kaddr = kmap_atomic(page, KM_USER0); |
| memset(kaddr + offset, 0, PAGE_CACHE_SIZE - offset); |
| flush_dcache_page(page); |
| kunmap_atomic(kaddr, KM_USER0); |
| out: |
| ret = mpage_writepage(page, get_block, wbc); |
| if (ret == -EAGAIN) |
| ret = __block_write_full_page(inode, page, get_block, wbc); |
| return ret; |
| } |
| EXPORT_SYMBOL(nobh_writepage); |
| |
| /* |
| * This function assumes that ->prepare_write() uses nobh_prepare_write(). |
| */ |
| int nobh_truncate_page(struct address_space *mapping, loff_t from) |
| { |
| struct inode *inode = mapping->host; |
| unsigned blocksize = 1 << inode->i_blkbits; |
| pgoff_t index = from >> PAGE_CACHE_SHIFT; |
| unsigned offset = from & (PAGE_CACHE_SIZE-1); |
| unsigned to; |
| struct page *page; |
| struct address_space_operations *a_ops = mapping->a_ops; |
| char *kaddr; |
| int ret = 0; |
| |
| if ((offset & (blocksize - 1)) == 0) |
| goto out; |
| |
| ret = -ENOMEM; |
| page = grab_cache_page(mapping, index); |
| if (!page) |
| goto out; |
| |
| to = (offset + blocksize) & ~(blocksize - 1); |
| ret = a_ops->prepare_write(NULL, page, offset, to); |
| if (ret == 0) { |
| kaddr = kmap_atomic(page, KM_USER0); |
| memset(kaddr + offset, 0, PAGE_CACHE_SIZE - offset); |
| flush_dcache_page(page); |
| kunmap_atomic(kaddr, KM_USER0); |
| set_page_dirty(page); |
| } |
| unlock_page(page); |
| page_cache_release(page); |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(nobh_truncate_page); |
| |
| int block_truncate_page(struct address_space *mapping, |
| loff_t from, get_block_t *get_block) |
| { |
| pgoff_t index = from >> PAGE_CACHE_SHIFT; |
| unsigned offset = from & (PAGE_CACHE_SIZE-1); |
| unsigned blocksize; |
| pgoff_t iblock; |
| unsigned length, pos; |
| struct inode *inode = mapping->host; |
| struct page *page; |
| struct buffer_head *bh; |
| void *kaddr; |
| int err; |
| |
| blocksize = 1 << inode->i_blkbits; |
| length = offset & (blocksize - 1); |
| |
| /* Block boundary? Nothing to do */ |
| if (!length) |
| return 0; |
| |
| length = blocksize - length; |
| iblock = index << (PAGE_CACHE_SHIFT - inode->i_blkbits); |
| |
| page = grab_cache_page(mapping, index); |
| err = -ENOMEM; |
| if (!page) |
| goto out; |
| |
| if (!page_has_buffers(page)) |
| create_empty_buffers(page, blocksize, 0); |
| |
| /* Find the buffer that contains "offset" */ |
| bh = page_buffers(page); |
| pos = blocksize; |
| while (offset >= pos) { |
| bh = bh->b_this_page; |
| iblock++; |
| pos += blocksize; |
| } |
| |
| err = 0; |
| if (!buffer_mapped(bh)) { |
| err = get_block(inode, iblock, bh, 0); |
| if (err) |
| goto unlock; |
| /* unmapped? It's a hole - nothing to do */ |
| if (!buffer_mapped(bh)) |
| goto unlock; |
| } |
| |
| /* Ok, it's mapped. Make sure it's up-to-date */ |
| if (PageUptodate(page)) |
| set_buffer_uptodate(bh); |
| |
| if (!buffer_uptodate(bh) && !buffer_delay(bh)) { |
| err = -EIO; |
| ll_rw_block(READ, 1, &bh); |
| wait_on_buffer(bh); |
| /* Uhhuh. Read error. Complain and punt. */ |
| if (!buffer_uptodate(bh)) |
| goto unlock; |
| } |
| |
| kaddr = kmap_atomic(page, KM_USER0); |
| memset(kaddr + offset, 0, length); |
| flush_dcache_page(page); |
| kunmap_atomic(kaddr, KM_USER0); |
| |
| mark_buffer_dirty(bh); |
| err = 0; |
| |
| unlock: |
| unlock_page(page); |
| page_cache_release(page); |
| out: |
| return err; |
| } |
| |
| /* |
| * The generic ->writepage function for buffer-backed address_spaces |
| */ |
| int block_write_full_page(struct page *page, get_block_t *get_block, |
| struct writeback_control *wbc) |
| { |
| struct inode * const inode = page->mapping->host; |
| loff_t i_size = i_size_read(inode); |
| const pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT; |
| unsigned offset; |
| void *kaddr; |
| |
| /* Is the page fully inside i_size? */ |
| if (page->index < end_index) |
| return __block_write_full_page(inode, page, get_block, wbc); |
| |
| /* Is the page fully outside i_size? (truncate in progress) */ |
| offset = i_size & (PAGE_CACHE_SIZE-1); |
| if (page->index >= end_index+1 || !offset) { |
| /* |
| * The page may have dirty, unmapped buffers. For example, |
| * they may have been added in ext3_writepage(). Make them |
| * freeable here, so the page does not leak. |
| */ |
| do_invalidatepage(page, 0); |
| unlock_page(page); |
| return 0; /* don't care */ |
| } |
| |
| /* |
| * The page straddles i_size. It must be zeroed out on each and every |
| * writepage invokation because it may be mmapped. "A file is mapped |
| * in multiples of the page size. For a file that is not a multiple of |
| * the page size, the remaining memory is zeroed when mapped, and |
| * writes to that region are not written out to the file." |
| */ |
| kaddr = kmap_atomic(page, KM_USER0); |
| memset(kaddr + offset, 0, PAGE_CACHE_SIZE - offset); |
| flush_dcache_page(page); |
| kunmap_atomic(kaddr, KM_USER0); |
| return __block_write_full_page(inode, page, get_block, wbc); |
| } |
| |
| sector_t generic_block_bmap(struct address_space *mapping, sector_t block, |
| get_block_t *get_block) |
| { |
| struct buffer_head tmp; |
| struct inode *inode = mapping->host; |
| tmp.b_state = 0; |
| tmp.b_blocknr = 0; |
| get_block(inode, block, &tmp, 0); |
| return tmp.b_blocknr; |
| } |
| |
| static int end_bio_bh_io_sync(struct bio *bio, unsigned int bytes_done, int err) |
| { |
| struct buffer_head *bh = bio->bi_private; |
| |
| if (bio->bi_size) |
| return 1; |
| |
| if (err == -EOPNOTSUPP) { |
| set_bit(BIO_EOPNOTSUPP, &bio->bi_flags); |
| set_bit(BH_Eopnotsupp, &bh->b_state); |
| } |
| |
| bh->b_end_io(bh, test_bit(BIO_UPTODATE, &bio->bi_flags)); |
| bio_put(bio); |
| return 0; |
| } |
| |
| int submit_bh(int rw, struct buffer_head * bh) |
| { |
| struct bio *bio; |
| int ret = 0; |
| |
| BUG_ON(!buffer_locked(bh)); |
| BUG_ON(!buffer_mapped(bh)); |
| BUG_ON(!bh->b_end_io); |
| |
| if (buffer_ordered(bh) && (rw == WRITE)) |
| rw = WRITE_BARRIER; |
| |
| /* |
| * Only clear out a write error when rewriting, should this |
| * include WRITE_SYNC as well? |
| */ |
| if (test_set_buffer_req(bh) && (rw == WRITE || rw == WRITE_BARRIER)) |
| clear_buffer_write_io_error(bh); |
| |
| /* |
| * from here on down, it's all bio -- do the initial mapping, |
| * submit_bio -> generic_make_request may further map this bio around |
| */ |
| bio = bio_alloc(GFP_NOIO, 1); |
| |
| bio->bi_sector = bh->b_blocknr * (bh->b_size >> 9); |
| bio->bi_bdev = bh->b_bdev; |
| bio->bi_io_vec[0].bv_page = bh->b_page; |
| bio->bi_io_vec[0].bv_len = bh->b_size; |
| bio->bi_io_vec[0].bv_offset = bh_offset(bh); |
| |
| bio->bi_vcnt = 1; |
| bio->bi_idx = 0; |
| bio->bi_size = bh->b_size; |
| |
| bio->bi_end_io = end_bio_bh_io_sync; |
| bio->bi_private = bh; |
| |
| bio_get(bio); |
| submit_bio(rw, bio); |
| |
| if (bio_flagged(bio, BIO_EOPNOTSUPP)) |
| ret = -EOPNOTSUPP; |
| |
| bio_put(bio); |
| return ret; |
| } |
| |
| /** |
| * ll_rw_block: low-level access to block devices (DEPRECATED) |
| * @rw: whether to %READ or %WRITE or %SWRITE or maybe %READA (readahead) |
| * @nr: number of &struct buffer_heads in the array |
| * @bhs: array of pointers to &struct buffer_head |
| * |
| * ll_rw_block() takes an array of pointers to &struct buffer_heads, and |
| * requests an I/O operation on them, either a %READ or a %WRITE. The third |
| * %SWRITE is like %WRITE only we make sure that the *current* data in buffers |
| * are sent to disk. The fourth %READA option is described in the documentation |
| * for generic_make_request() which ll_rw_block() calls. |
| * |
| * This function drops any buffer that it cannot get a lock on (with the |
| * BH_Lock state bit) unless SWRITE is required, any buffer that appears to be |
| * clean when doing a write request, and any buffer that appears to be |
| * up-to-date when doing read request. Further it marks as clean buffers that |
| * are processed for writing (the buffer cache won't assume that they are |
| * actually clean until the buffer gets unlocked). |
| * |
| * ll_rw_block sets b_end_io to simple completion handler that marks |
| * the buffer up-to-date (if approriate), unlocks the buffer and wakes |
| * any waiters. |
| * |
| * All of the buffers must be for the same device, and must also be a |
| * multiple of the current approved size for the device. |
| */ |
| void ll_rw_block(int rw, int nr, struct buffer_head *bhs[]) |
| { |
| int i; |
| |
| for (i = 0; i < nr; i++) { |
| struct buffer_head *bh = bhs[i]; |
| |
| if (rw == SWRITE) |
| lock_buffer(bh); |
| else if (test_set_buffer_locked(bh)) |
| continue; |
| |
| get_bh(bh); |
| if (rw == WRITE || rw == SWRITE) { |
| if (test_clear_buffer_dirty(bh)) { |
| bh->b_end_io = end_buffer_write_sync; |
| submit_bh(WRITE, bh); |
| continue; |
| } |
| } else { |
| if (!buffer_uptodate(bh)) { |
| bh->b_end_io = end_buffer_read_sync; |
| submit_bh(rw, bh); |
| continue; |
| } |
| } |
| unlock_buffer(bh); |
| put_bh(bh); |
| } |
| } |
| |
| /* |
| * For a data-integrity writeout, we need to wait upon any in-progress I/O |
| * and then start new I/O and then wait upon it. The caller must have a ref on |
| * the buffer_head. |
| */ |
| int sync_dirty_buffer(struct buffer_head *bh) |
| { |
| int ret = 0; |
| |
| WARN_ON(atomic_read(&bh->b_count) < 1); |
| lock_buffer(bh); |
| if (test_clear_buffer_dirty(bh)) { |
| get_bh(bh); |
| bh->b_end_io = end_buffer_write_sync; |
| ret = submit_bh(WRITE, bh); |
| wait_on_buffer(bh); |
| if (buffer_eopnotsupp(bh)) { |
| clear_buffer_eopnotsupp(bh); |
| ret = -EOPNOTSUPP; |
| } |
| if (!ret && !buffer_uptodate(bh)) |
| ret = -EIO; |
| } else { |
| unlock_buffer(bh); |
| } |
| return ret; |
| } |
| |
| /* |
| * try_to_free_buffers() checks if all the buffers on this particular page |
| * are unused, and releases them if so. |
| * |
| * Exclusion against try_to_free_buffers may be obtained by either |
| * locking the page or by holding its mapping's private_lock. |
| * |
| * If the page is dirty but all the buffers are clean then we need to |
| * be sure to mark the page clean as well. This is because the page |
| * may be against a block device, and a later reattachment of buffers |
| * to a dirty page will set *all* buffers dirty. Which would corrupt |
| * filesystem data on the same device. |
| * |
| * The same applies to regular filesystem pages: if all the buffers are |
| * clean then we set the page clean and proceed. To do that, we require |
| * total exclusion from __set_page_dirty_buffers(). That is obtained with |
| * private_lock. |
| * |
| * try_to_free_buffers() is non-blocking. |
| */ |
| static inline int buffer_busy(struct buffer_head *bh) |
| { |
| return atomic_read(&bh->b_count) | |
| (bh->b_state & ((1 << BH_Dirty) | (1 << BH_Lock))); |
| } |
| |
| static int |
| drop_buffers(struct page *page, struct buffer_head **buffers_to_free) |
| { |
| struct buffer_head *head = page_buffers(page); |
| struct buffer_head *bh; |
| |
| bh = head; |
| do { |
| if (buffer_write_io_error(bh) && page->mapping) |
| set_bit(AS_EIO, &page->mapping->flags); |
| if (buffer_busy(bh)) |
| goto failed; |
| bh = bh->b_this_page; |
| } while (bh != head); |
| |
| do { |
| struct buffer_head *next = bh->b_this_page; |
| |
| if (!list_empty(&bh->b_assoc_buffers)) |
| __remove_assoc_queue(bh); |
| bh = next; |
| } while (bh != head); |
| *buffers_to_free = head; |
| __clear_page_buffers(page); |
| return 1; |
| failed: |
| return 0; |
| } |
| |
| int try_to_free_buffers(struct page *page) |
| { |
| struct address_space * const mapping = page->mapping; |
| struct buffer_head *buffers_to_free = NULL; |
| int ret = 0; |
| |
| BUG_ON(!PageLocked(page)); |
| if (PageWriteback(page)) |
| return 0; |
| |
| if (mapping == NULL) { /* can this still happen? */ |
| ret = drop_buffers(page, &buffers_to_free); |
| goto out; |
| } |
| |
| spin_lock(&mapping->private_lock); |
| ret = drop_buffers(page, &buffers_to_free); |
| if (ret) { |
| /* |
| * If the filesystem writes its buffers by hand (eg ext3) |
| * then we can have clean buffers against a dirty page. We |
| * clean the page here; otherwise later reattachment of buffers |
| * could encounter a non-uptodate page, which is unresolvable. |
| * This only applies in the rare case where try_to_free_buffers |
| * succeeds but the page is not freed. |
| */ |
| clear_page_dirty(page); |
| } |
| spin_unlock(&mapping->private_lock); |
| out: |
| if (buffers_to_free) { |
| struct buffer_head *bh = buffers_to_free; |
| |
| do { |
| struct buffer_head *next = bh->b_this_page; |
| free_buffer_head(bh); |
| bh = next; |
| } while (bh != buffers_to_free); |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL(try_to_free_buffers); |
| |
| int block_sync_page(struct page *page) |
| { |
| struct address_space *mapping; |
| |
| smp_mb(); |
| mapping = page_mapping(page); |
| if (mapping) |
| blk_run_backing_dev(mapping->backing_dev_info, page); |
| return 0; |
| } |
| |
| /* |
| * There are no bdflush tunables left. But distributions are |
| * still running obsolete flush daemons, so we terminate them here. |
| * |
| * Use of bdflush() is deprecated and will be removed in a future kernel. |
| * The `pdflush' kernel threads fully replace bdflush daemons and this call. |
| */ |
| asmlinkage long sys_bdflush(int func, long data) |
| { |
| static int msg_count; |
| |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| |
| if (msg_count < 5) { |
| msg_count++; |
| printk(KERN_INFO |
| "warning: process `%s' used the obsolete bdflush" |
| " system call\n", current->comm); |
| printk(KERN_INFO "Fix your initscripts?\n"); |
| } |
| |
| if (func == 1) |
| do_exit(0); |
| return 0; |
| } |
| |
| /* |
| * Buffer-head allocation |
| */ |
| static kmem_cache_t *bh_cachep; |
| |
| /* |
| * Once the number of bh's in the machine exceeds this level, we start |
| * stripping them in writeback. |
| */ |
| static int max_buffer_heads; |
| |
| int buffer_heads_over_limit; |
| |
| struct bh_accounting { |
| int nr; /* Number of live bh's */ |
| int ratelimit; /* Limit cacheline bouncing */ |
| }; |
| |
| static DEFINE_PER_CPU(struct bh_accounting, bh_accounting) = {0, 0}; |
| |
| static void recalc_bh_state(void) |
| { |
| int i; |
| int tot = 0; |
| |
| if (__get_cpu_var(bh_accounting).ratelimit++ < 4096) |
| return; |
| __get_cpu_var(bh_accounting).ratelimit = 0; |
| for_each_cpu(i) |
| tot += per_cpu(bh_accounting, i).nr; |
| buffer_heads_over_limit = (tot > max_buffer_heads); |
| } |
| |
| struct buffer_head *alloc_buffer_head(gfp_t gfp_flags) |
| { |
| struct buffer_head *ret = kmem_cache_alloc(bh_cachep, gfp_flags); |
| if (ret) { |
| get_cpu_var(bh_accounting).nr++; |
| recalc_bh_state(); |
| put_cpu_var(bh_accounting); |
| } |
| return ret; |
| } |
| EXPORT_SYMBOL(alloc_buffer_head); |
| |
| void free_buffer_head(struct buffer_head *bh) |
| { |
| BUG_ON(!list_empty(&bh->b_assoc_buffers)); |
| kmem_cache_free(bh_cachep, bh); |
| get_cpu_var(bh_accounting).nr--; |
| recalc_bh_state(); |
| put_cpu_var(bh_accounting); |
| } |
| EXPORT_SYMBOL(free_buffer_head); |
| |
| static void |
| init_buffer_head(void *data, kmem_cache_t *cachep, unsigned long flags) |
| { |
| if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) == |
| SLAB_CTOR_CONSTRUCTOR) { |
| struct buffer_head * bh = (struct buffer_head *)data; |
| |
| memset(bh, 0, sizeof(*bh)); |
| INIT_LIST_HEAD(&bh->b_assoc_buffers); |
| } |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| static void buffer_exit_cpu(int cpu) |
| { |
| int i; |
| struct bh_lru *b = &per_cpu(bh_lrus, cpu); |
| |
| for (i = 0; i < BH_LRU_SIZE; i++) { |
| brelse(b->bhs[i]); |
| b->bhs[i] = NULL; |
| } |
| } |
| |
| static int buffer_cpu_notify(struct notifier_block *self, |
| unsigned long action, void *hcpu) |
| { |
| if (action == CPU_DEAD) |
| buffer_exit_cpu((unsigned long)hcpu); |
| return NOTIFY_OK; |
| } |
| #endif /* CONFIG_HOTPLUG_CPU */ |
| |
| void __init buffer_init(void) |
| { |
| int nrpages; |
| |
| bh_cachep = kmem_cache_create("buffer_head", |
| sizeof(struct buffer_head), 0, |
| SLAB_RECLAIM_ACCOUNT|SLAB_PANIC, init_buffer_head, NULL); |
| |
| /* |
| * Limit the bh occupancy to 10% of ZONE_NORMAL |
| */ |
| nrpages = (nr_free_buffer_pages() * 10) / 100; |
| max_buffer_heads = nrpages * (PAGE_SIZE / sizeof(struct buffer_head)); |
| hotcpu_notifier(buffer_cpu_notify, 0); |
| } |
| |
| EXPORT_SYMBOL(__bforget); |
| EXPORT_SYMBOL(__brelse); |
| EXPORT_SYMBOL(__wait_on_buffer); |
| EXPORT_SYMBOL(block_commit_write); |
| EXPORT_SYMBOL(block_prepare_write); |
| EXPORT_SYMBOL(block_read_full_page); |
| EXPORT_SYMBOL(block_sync_page); |
| EXPORT_SYMBOL(block_truncate_page); |
| EXPORT_SYMBOL(block_write_full_page); |
| EXPORT_SYMBOL(cont_prepare_write); |
| EXPORT_SYMBOL(end_buffer_async_write); |
| EXPORT_SYMBOL(end_buffer_read_sync); |
| EXPORT_SYMBOL(end_buffer_write_sync); |
| EXPORT_SYMBOL(file_fsync); |
| EXPORT_SYMBOL(fsync_bdev); |
| EXPORT_SYMBOL(generic_block_bmap); |
| EXPORT_SYMBOL(generic_commit_write); |
| EXPORT_SYMBOL(generic_cont_expand); |
| EXPORT_SYMBOL(generic_cont_expand_simple); |
| EXPORT_SYMBOL(init_buffer); |
| EXPORT_SYMBOL(invalidate_bdev); |
| EXPORT_SYMBOL(ll_rw_block); |
| EXPORT_SYMBOL(mark_buffer_dirty); |
| EXPORT_SYMBOL(submit_bh); |
| EXPORT_SYMBOL(sync_dirty_buffer); |
| EXPORT_SYMBOL(unlock_buffer); |