| /* |
| * soundbus generic definitions |
| * |
| * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> |
| * |
| * GPL v2, can be found in COPYING. |
| */ |
| #ifndef __SOUNDBUS_H |
| #define __SOUNDBUS_H |
| |
| #include <asm/of_device.h> |
| #include <sound/pcm.h> |
| #include <linux/list.h> |
| |
| |
| /* When switching from master to slave or the other way around, |
| * you don't want to have the codec chip acting as clock source |
| * while the bus still is. |
| * More importantly, while switch from slave to master, you need |
| * to turn off the chip's master function first, but then there's |
| * no clock for a while and other chips might reset, so we notify |
| * their drivers after having switched. |
| * The constants here are codec-point of view, so when we switch |
| * the soundbus to master we tell the codec we're going to switch |
| * and give it CLOCK_SWITCH_PREPARE_SLAVE! |
| */ |
| enum clock_switch { |
| CLOCK_SWITCH_PREPARE_SLAVE, |
| CLOCK_SWITCH_PREPARE_MASTER, |
| CLOCK_SWITCH_SLAVE, |
| CLOCK_SWITCH_MASTER, |
| CLOCK_SWITCH_NOTIFY, |
| }; |
| |
| /* information on a transfer the codec can take */ |
| struct transfer_info { |
| u64 formats; /* SNDRV_PCM_FMTBIT_* */ |
| unsigned int rates; /* SNDRV_PCM_RATE_* */ |
| /* flags */ |
| u32 transfer_in:1, /* input = 1, output = 0 */ |
| must_be_clock_source:1; |
| /* for codecs to distinguish among their TIs */ |
| int tag; |
| }; |
| |
| struct codec_info_item { |
| struct codec_info *codec; |
| void *codec_data; |
| struct soundbus_dev *sdev; |
| /* internal, to be used by the soundbus provider */ |
| struct list_head list; |
| }; |
| |
| /* for prepare, where the codecs need to know |
| * what we're going to drive the bus with */ |
| struct bus_info { |
| /* see below */ |
| int sysclock_factor; |
| int bus_factor; |
| }; |
| |
| /* information on the codec itself, plus function pointers */ |
| struct codec_info { |
| /* the module this lives in */ |
| struct module *owner; |
| |
| /* supported transfer possibilities, array terminated by |
| * formats or rates being 0. */ |
| struct transfer_info *transfers; |
| |
| /* Master clock speed factor |
| * to be used (master clock speed = sysclock_factor * sampling freq) |
| * Unused if the soundbus provider has no such notion. |
| */ |
| int sysclock_factor; |
| |
| /* Bus factor, bus clock speed = bus_factor * sampling freq) |
| * Unused if the soundbus provider has no such notion. |
| */ |
| int bus_factor; |
| |
| /* operations */ |
| /* clock switching, see above */ |
| int (*switch_clock)(struct codec_info_item *cii, |
| enum clock_switch clock); |
| |
| /* called for each transfer_info when the user |
| * opens the pcm device to determine what the |
| * hardware can support at this point in time. |
| * That can depend on other user-switchable controls. |
| * Return 1 if usable, 0 if not. |
| * out points to another instance of a transfer_info |
| * which is initialised to the values in *ti, and |
| * it's format and rate values can be modified by |
| * the callback if it is necessary to further restrict |
| * the formats that can be used at the moment, for |
| * example when one codec has multiple logical codec |
| * info structs for multiple inputs. |
| */ |
| int (*usable)(struct codec_info_item *cii, |
| struct transfer_info *ti, |
| struct transfer_info *out); |
| |
| /* called when pcm stream is opened, probably not implemented |
| * most of the time since it isn't too useful */ |
| int (*open)(struct codec_info_item *cii, |
| struct snd_pcm_substream *substream); |
| |
| /* called when the pcm stream is closed, at this point |
| * the user choices can all be unlocked (see below) */ |
| int (*close)(struct codec_info_item *cii, |
| struct snd_pcm_substream *substream); |
| |
| /* if the codec must forbid some user choices because |
| * they are not valid with the substream/transfer info, |
| * it must do so here. Example: no digital output for |
| * incompatible framerate, say 8KHz, on Onyx. |
| * If the selected stuff in the substream is NOT |
| * compatible, you have to reject this call! */ |
| int (*prepare)(struct codec_info_item *cii, |
| struct bus_info *bi, |
| struct snd_pcm_substream *substream); |
| |
| /* start() is called before data is pushed to the codec. |
| * Note that start() must be atomic! */ |
| int (*start)(struct codec_info_item *cii, |
| struct snd_pcm_substream *substream); |
| |
| /* stop() is called after data is no longer pushed to the codec. |
| * Note that stop() must be atomic! */ |
| int (*stop)(struct codec_info_item *cii, |
| struct snd_pcm_substream *substream); |
| |
| int (*suspend)(struct codec_info_item *cii, pm_message_t state); |
| int (*resume)(struct codec_info_item *cii); |
| }; |
| |
| /* information on a soundbus device */ |
| struct soundbus_dev { |
| /* the bus it belongs to */ |
| struct list_head onbuslist; |
| |
| /* the of device it represents */ |
| struct of_device ofdev; |
| |
| /* what modules go by */ |
| char modalias[32]; |
| |
| /* These fields must be before attach_codec can be called. |
| * They should be set by the owner of the alsa card object |
| * that is needed, and whoever sets them must make sure |
| * that they are unique within that alsa card object. */ |
| char *pcmname; |
| int pcmid; |
| |
| /* this is assigned by the soundbus provider in attach_codec */ |
| struct snd_pcm *pcm; |
| |
| /* operations */ |
| /* attach a codec to this soundbus, give the alsa |
| * card object the PCMs for this soundbus should be in. |
| * The 'data' pointer must be unique, it is used as the |
| * key for detach_codec(). */ |
| int (*attach_codec)(struct soundbus_dev *dev, struct snd_card *card, |
| struct codec_info *ci, void *data); |
| void (*detach_codec)(struct soundbus_dev *dev, void *data); |
| /* TODO: suspend/resume */ |
| |
| /* private for the soundbus provider */ |
| struct list_head codec_list; |
| u32 have_out:1, have_in:1; |
| }; |
| #define to_soundbus_device(d) container_of(d, struct soundbus_dev, ofdev.dev) |
| #define of_to_soundbus_device(d) container_of(d, struct soundbus_dev, ofdev) |
| |
| extern int soundbus_add_one(struct soundbus_dev *dev); |
| extern void soundbus_remove_one(struct soundbus_dev *dev); |
| |
| extern struct soundbus_dev *soundbus_dev_get(struct soundbus_dev *dev); |
| extern void soundbus_dev_put(struct soundbus_dev *dev); |
| |
| struct soundbus_driver { |
| char *name; |
| struct module *owner; |
| |
| /* we don't implement any matching at all */ |
| |
| int (*probe)(struct soundbus_dev* dev); |
| int (*remove)(struct soundbus_dev* dev); |
| |
| int (*suspend)(struct soundbus_dev* dev, pm_message_t state); |
| int (*resume)(struct soundbus_dev* dev); |
| int (*shutdown)(struct soundbus_dev* dev); |
| |
| struct device_driver driver; |
| }; |
| #define to_soundbus_driver(drv) container_of(drv,struct soundbus_driver, driver) |
| |
| extern int soundbus_register_driver(struct soundbus_driver *drv); |
| extern void soundbus_unregister_driver(struct soundbus_driver *drv); |
| |
| extern struct device_attribute soundbus_dev_attrs[]; |
| |
| #endif /* __SOUNDBUS_H */ |