drivers/net: Trim trailing whitespace
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/depca.h b/drivers/net/depca.h
index 1178527..ee42648 100644
--- a/drivers/net/depca.h
+++ b/drivers/net/depca.h
@@ -20,17 +20,17 @@
#define DEPCA_RBSA ioaddr+0x0e /* RAM buffer starting address (2k buff.) */
/*
-** These are LANCE registers addressable through DEPCA_ADDR
+** These are LANCE registers addressable through DEPCA_ADDR
*/
#define CSR0 0
#define CSR1 1
#define CSR2 2
#define CSR3 3
-/*
-** NETWORK INTERFACE CSR (NI_CSR) bit definitions
+/*
+** NETWORK INTERFACE CSR (NI_CSR) bit definitions
*/
-
+
#define TO 0x0100 /* Time Out for remote boot */
#define SHE 0x0080 /* SHadow memory Enable */
#define BS 0x0040 /* Bank Select */
@@ -42,8 +42,8 @@
#define IEN 0x0002 /* Interrupt tristate ENable (1->enable) */
#define LED 0x0001 /* LED control */
-/*
-** Control and Status Register 0 (CSR0) bit definitions
+/*
+** Control and Status Register 0 (CSR0) bit definitions
*/
#define ERR 0x8000 /* Error summary */
@@ -74,7 +74,7 @@
#define BCON 0x0001 /* Byte CONtrol */
/*
-** Initialization Block Mode Register
+** Initialization Block Mode Register
*/
#define PROM 0x8000 /* Promiscuous Mode */
@@ -88,7 +88,7 @@
#define DRX 0x0001 /* Disable the Receiver */
/*
-** Receive Message Descriptor 1 (RMD1) bit definitions.
+** Receive Message Descriptor 1 (RMD1) bit definitions.
*/
#define R_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */
@@ -101,7 +101,7 @@
#define R_ENP 0x0100 /* End of Packet */
/*
-** Transmit Message Descriptor 1 (TMD1) bit definitions.
+** Transmit Message Descriptor 1 (TMD1) bit definitions.
*/
#define T_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */
@@ -125,10 +125,10 @@
#define TMD3_LCAR 0x0800 /* Loss of CARrier */
#define TMD3_RTRY 0x0400 /* ReTRY error */
-/*
-** EISA configuration Register (CNFG) bit definitions
+/*
+** EISA configuration Register (CNFG) bit definitions
*/
-
+
#define TIMEOUT 0x0100 /* 0:2.5 mins, 1: 30 secs */
#define REMOTE 0x0080 /* Remote Boot Enable -> 1 */
#define IRQ11 0x0040 /* Enable -> 1 */
@@ -165,8 +165,8 @@
unsigned char __user *data; /* Pointer to the data buffer */
};
-/*
-** Recognised commands for the driver
+/*
+** Recognised commands for the driver
*/
#define DEPCA_GET_HWADDR 0x01 /* Get the hardware address */
#define DEPCA_SET_HWADDR 0x02 /* Get the hardware address */