| /* |
| * JFFS2 -- Journalling Flash File System, Version 2. |
| * |
| * Copyright © 2001-2007 Red Hat, Inc. |
| * |
| * Created by David Woodhouse <dwmw2@infradead.org> |
| * |
| * For licensing information, see the file 'LICENCE' in this directory. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/fs.h> |
| #include <linux/err.h> |
| #include <linux/mount.h> |
| #include <linux/jffs2.h> |
| #include <linux/pagemap.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/ctype.h> |
| #include <linux/namei.h> |
| #include "compr.h" |
| #include "nodelist.h" |
| |
| static void jffs2_put_super(struct super_block *); |
| |
| static struct kmem_cache *jffs2_inode_cachep; |
| |
| static struct inode *jffs2_alloc_inode(struct super_block *sb) |
| { |
| struct jffs2_inode_info *ei; |
| ei = (struct jffs2_inode_info *)kmem_cache_alloc(jffs2_inode_cachep, GFP_KERNEL); |
| if (!ei) |
| return NULL; |
| return &ei->vfs_inode; |
| } |
| |
| static void jffs2_destroy_inode(struct inode *inode) |
| { |
| kmem_cache_free(jffs2_inode_cachep, JFFS2_INODE_INFO(inode)); |
| } |
| |
| static void jffs2_i_init_once(void * foo, struct kmem_cache * cachep, unsigned long flags) |
| { |
| struct jffs2_inode_info *ei = (struct jffs2_inode_info *) foo; |
| |
| if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) == |
| SLAB_CTOR_CONSTRUCTOR) { |
| init_MUTEX(&ei->sem); |
| inode_init_once(&ei->vfs_inode); |
| } |
| } |
| |
| static int jffs2_sync_fs(struct super_block *sb, int wait) |
| { |
| struct jffs2_sb_info *c = JFFS2_SB_INFO(sb); |
| |
| down(&c->alloc_sem); |
| jffs2_flush_wbuf_pad(c); |
| up(&c->alloc_sem); |
| return 0; |
| } |
| |
| static const struct super_operations jffs2_super_operations = |
| { |
| .alloc_inode = jffs2_alloc_inode, |
| .destroy_inode =jffs2_destroy_inode, |
| .read_inode = jffs2_read_inode, |
| .put_super = jffs2_put_super, |
| .write_super = jffs2_write_super, |
| .statfs = jffs2_statfs, |
| .remount_fs = jffs2_remount_fs, |
| .clear_inode = jffs2_clear_inode, |
| .dirty_inode = jffs2_dirty_inode, |
| .sync_fs = jffs2_sync_fs, |
| }; |
| |
| static int jffs2_sb_compare(struct super_block *sb, void *data) |
| { |
| struct jffs2_sb_info *p = data; |
| struct jffs2_sb_info *c = JFFS2_SB_INFO(sb); |
| |
| /* The superblocks are considered to be equivalent if the underlying MTD |
| device is the same one */ |
| if (c->mtd == p->mtd) { |
| D1(printk(KERN_DEBUG "jffs2_sb_compare: match on device %d (\"%s\")\n", p->mtd->index, p->mtd->name)); |
| return 1; |
| } else { |
| D1(printk(KERN_DEBUG "jffs2_sb_compare: No match, device %d (\"%s\"), device %d (\"%s\")\n", |
| c->mtd->index, c->mtd->name, p->mtd->index, p->mtd->name)); |
| return 0; |
| } |
| } |
| |
| static int jffs2_sb_set(struct super_block *sb, void *data) |
| { |
| struct jffs2_sb_info *p = data; |
| |
| /* For persistence of NFS exports etc. we use the same s_dev |
| each time we mount the device, don't just use an anonymous |
| device */ |
| sb->s_fs_info = p; |
| p->os_priv = sb; |
| sb->s_dev = MKDEV(MTD_BLOCK_MAJOR, p->mtd->index); |
| |
| return 0; |
| } |
| |
| static int jffs2_get_sb_mtd(struct file_system_type *fs_type, |
| int flags, const char *dev_name, |
| void *data, struct mtd_info *mtd, |
| struct vfsmount *mnt) |
| { |
| struct super_block *sb; |
| struct jffs2_sb_info *c; |
| int ret; |
| |
| c = kzalloc(sizeof(*c), GFP_KERNEL); |
| if (!c) |
| return -ENOMEM; |
| c->mtd = mtd; |
| |
| sb = sget(fs_type, jffs2_sb_compare, jffs2_sb_set, c); |
| |
| if (IS_ERR(sb)) |
| goto out_error; |
| |
| if (sb->s_root) { |
| /* New mountpoint for JFFS2 which is already mounted */ |
| D1(printk(KERN_DEBUG "jffs2_get_sb_mtd(): Device %d (\"%s\") is already mounted\n", |
| mtd->index, mtd->name)); |
| ret = simple_set_mnt(mnt, sb); |
| goto out_put; |
| } |
| |
| D1(printk(KERN_DEBUG "jffs2_get_sb_mtd(): New superblock for device %d (\"%s\")\n", |
| mtd->index, mtd->name)); |
| |
| /* Initialize JFFS2 superblock locks, the further initialization will be |
| * done later */ |
| init_MUTEX(&c->alloc_sem); |
| init_MUTEX(&c->erase_free_sem); |
| init_waitqueue_head(&c->erase_wait); |
| init_waitqueue_head(&c->inocache_wq); |
| spin_lock_init(&c->erase_completion_lock); |
| spin_lock_init(&c->inocache_lock); |
| |
| sb->s_op = &jffs2_super_operations; |
| sb->s_flags = flags | MS_NOATIME; |
| sb->s_xattr = jffs2_xattr_handlers; |
| #ifdef CONFIG_JFFS2_FS_POSIX_ACL |
| sb->s_flags |= MS_POSIXACL; |
| #endif |
| ret = jffs2_do_fill_super(sb, data, flags & MS_SILENT ? 1 : 0); |
| |
| if (ret) { |
| /* Failure case... */ |
| up_write(&sb->s_umount); |
| deactivate_super(sb); |
| return ret; |
| } |
| |
| sb->s_flags |= MS_ACTIVE; |
| return simple_set_mnt(mnt, sb); |
| |
| out_error: |
| ret = PTR_ERR(sb); |
| out_put: |
| kfree(c); |
| put_mtd_device(mtd); |
| |
| return ret; |
| } |
| |
| static int jffs2_get_sb_mtdnr(struct file_system_type *fs_type, |
| int flags, const char *dev_name, |
| void *data, int mtdnr, |
| struct vfsmount *mnt) |
| { |
| struct mtd_info *mtd; |
| |
| mtd = get_mtd_device(NULL, mtdnr); |
| if (IS_ERR(mtd)) { |
| D1(printk(KERN_DEBUG "jffs2: MTD device #%u doesn't appear to exist\n", mtdnr)); |
| return PTR_ERR(mtd); |
| } |
| |
| return jffs2_get_sb_mtd(fs_type, flags, dev_name, data, mtd, mnt); |
| } |
| |
| static int jffs2_get_sb(struct file_system_type *fs_type, |
| int flags, const char *dev_name, |
| void *data, struct vfsmount *mnt) |
| { |
| int err; |
| struct nameidata nd; |
| int mtdnr; |
| |
| if (!dev_name) |
| return -EINVAL; |
| |
| D1(printk(KERN_DEBUG "jffs2_get_sb(): dev_name \"%s\"\n", dev_name)); |
| |
| /* The preferred way of mounting in future; especially when |
| CONFIG_BLK_DEV is implemented - we specify the underlying |
| MTD device by number or by name, so that we don't require |
| block device support to be present in the kernel. */ |
| |
| /* FIXME: How to do the root fs this way? */ |
| |
| if (dev_name[0] == 'm' && dev_name[1] == 't' && dev_name[2] == 'd') { |
| /* Probably mounting without the blkdev crap */ |
| if (dev_name[3] == ':') { |
| struct mtd_info *mtd; |
| |
| /* Mount by MTD device name */ |
| D1(printk(KERN_DEBUG "jffs2_get_sb(): mtd:%%s, name \"%s\"\n", dev_name+4)); |
| for (mtdnr = 0; mtdnr < MAX_MTD_DEVICES; mtdnr++) { |
| mtd = get_mtd_device(NULL, mtdnr); |
| if (!IS_ERR(mtd)) { |
| if (!strcmp(mtd->name, dev_name+4)) |
| return jffs2_get_sb_mtd(fs_type, flags, dev_name, data, mtd, mnt); |
| put_mtd_device(mtd); |
| } |
| } |
| printk(KERN_NOTICE "jffs2_get_sb(): MTD device with name \"%s\" not found.\n", dev_name+4); |
| } else if (isdigit(dev_name[3])) { |
| /* Mount by MTD device number name */ |
| char *endptr; |
| |
| mtdnr = simple_strtoul(dev_name+3, &endptr, 0); |
| if (!*endptr) { |
| /* It was a valid number */ |
| D1(printk(KERN_DEBUG "jffs2_get_sb(): mtd%%d, mtdnr %d\n", mtdnr)); |
| return jffs2_get_sb_mtdnr(fs_type, flags, dev_name, data, mtdnr, mnt); |
| } |
| } |
| } |
| |
| /* Try the old way - the hack where we allowed users to mount |
| /dev/mtdblock$(n) but didn't actually _use_ the blkdev */ |
| |
| err = path_lookup(dev_name, LOOKUP_FOLLOW, &nd); |
| |
| D1(printk(KERN_DEBUG "jffs2_get_sb(): path_lookup() returned %d, inode %p\n", |
| err, nd.dentry->d_inode)); |
| |
| if (err) |
| return err; |
| |
| err = -EINVAL; |
| |
| if (!S_ISBLK(nd.dentry->d_inode->i_mode)) |
| goto out; |
| |
| if (nd.mnt->mnt_flags & MNT_NODEV) { |
| err = -EACCES; |
| goto out; |
| } |
| |
| if (imajor(nd.dentry->d_inode) != MTD_BLOCK_MAJOR) { |
| if (!(flags & MS_SILENT)) |
| printk(KERN_NOTICE "Attempt to mount non-MTD device \"%s\" as JFFS2\n", |
| dev_name); |
| goto out; |
| } |
| |
| mtdnr = iminor(nd.dentry->d_inode); |
| path_release(&nd); |
| |
| return jffs2_get_sb_mtdnr(fs_type, flags, dev_name, data, mtdnr, mnt); |
| |
| out: |
| path_release(&nd); |
| return err; |
| } |
| |
| static void jffs2_put_super (struct super_block *sb) |
| { |
| struct jffs2_sb_info *c = JFFS2_SB_INFO(sb); |
| |
| D2(printk(KERN_DEBUG "jffs2: jffs2_put_super()\n")); |
| |
| down(&c->alloc_sem); |
| jffs2_flush_wbuf_pad(c); |
| up(&c->alloc_sem); |
| |
| jffs2_sum_exit(c); |
| |
| jffs2_free_ino_caches(c); |
| jffs2_free_raw_node_refs(c); |
| if (jffs2_blocks_use_vmalloc(c)) |
| vfree(c->blocks); |
| else |
| kfree(c->blocks); |
| jffs2_flash_cleanup(c); |
| kfree(c->inocache_list); |
| jffs2_clear_xattr_subsystem(c); |
| if (c->mtd->sync) |
| c->mtd->sync(c->mtd); |
| |
| D1(printk(KERN_DEBUG "jffs2_put_super returning\n")); |
| } |
| |
| static void jffs2_kill_sb(struct super_block *sb) |
| { |
| struct jffs2_sb_info *c = JFFS2_SB_INFO(sb); |
| if (!(sb->s_flags & MS_RDONLY)) |
| jffs2_stop_garbage_collect_thread(c); |
| generic_shutdown_super(sb); |
| put_mtd_device(c->mtd); |
| kfree(c); |
| } |
| |
| static struct file_system_type jffs2_fs_type = { |
| .owner = THIS_MODULE, |
| .name = "jffs2", |
| .get_sb = jffs2_get_sb, |
| .kill_sb = jffs2_kill_sb, |
| }; |
| |
| static int __init init_jffs2_fs(void) |
| { |
| int ret; |
| |
| /* Paranoia checks for on-medium structures. If we ask GCC |
| to pack them with __attribute__((packed)) then it _also_ |
| assumes that they're not aligned -- so it emits crappy |
| code on some architectures. Ideally we want an attribute |
| which means just 'no padding', without the alignment |
| thing. But GCC doesn't have that -- we have to just |
| hope the structs are the right sizes, instead. */ |
| BUILD_BUG_ON(sizeof(struct jffs2_unknown_node) != 12); |
| BUILD_BUG_ON(sizeof(struct jffs2_raw_dirent) != 40); |
| BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68); |
| BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32); |
| |
| printk(KERN_INFO "JFFS2 version 2.2." |
| #ifdef CONFIG_JFFS2_FS_WRITEBUFFER |
| " (NAND)" |
| #endif |
| #ifdef CONFIG_JFFS2_SUMMARY |
| " (SUMMARY) " |
| #endif |
| " © 2001-2006 Red Hat, Inc.\n"); |
| |
| jffs2_inode_cachep = kmem_cache_create("jffs2_i", |
| sizeof(struct jffs2_inode_info), |
| 0, (SLAB_RECLAIM_ACCOUNT| |
| SLAB_MEM_SPREAD), |
| jffs2_i_init_once, NULL); |
| if (!jffs2_inode_cachep) { |
| printk(KERN_ERR "JFFS2 error: Failed to initialise inode cache\n"); |
| return -ENOMEM; |
| } |
| ret = jffs2_compressors_init(); |
| if (ret) { |
| printk(KERN_ERR "JFFS2 error: Failed to initialise compressors\n"); |
| goto out; |
| } |
| ret = jffs2_create_slab_caches(); |
| if (ret) { |
| printk(KERN_ERR "JFFS2 error: Failed to initialise slab caches\n"); |
| goto out_compressors; |
| } |
| ret = register_filesystem(&jffs2_fs_type); |
| if (ret) { |
| printk(KERN_ERR "JFFS2 error: Failed to register filesystem\n"); |
| goto out_slab; |
| } |
| return 0; |
| |
| out_slab: |
| jffs2_destroy_slab_caches(); |
| out_compressors: |
| jffs2_compressors_exit(); |
| out: |
| kmem_cache_destroy(jffs2_inode_cachep); |
| return ret; |
| } |
| |
| static void __exit exit_jffs2_fs(void) |
| { |
| unregister_filesystem(&jffs2_fs_type); |
| jffs2_destroy_slab_caches(); |
| jffs2_compressors_exit(); |
| kmem_cache_destroy(jffs2_inode_cachep); |
| } |
| |
| module_init(init_jffs2_fs); |
| module_exit(exit_jffs2_fs); |
| |
| MODULE_DESCRIPTION("The Journalling Flash File System, v2"); |
| MODULE_AUTHOR("Red Hat, Inc."); |
| MODULE_LICENSE("GPL"); // Actually dual-licensed, but it doesn't matter for |
| // the sake of this tag. It's Free Software. |