diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 7e8ceea..72477c2 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -95,14 +95,14 @@
 	AWA_data_clear = SYSCR,
 	AWA_data_set = SYSCR,
 	AWA_toggle = SYSCR,
-	AWA_maska = UART_SCR,
-	AWA_maska_clear = UART_SCR,
-	AWA_maska_set = UART_SCR,
-	AWA_maska_toggle = UART_SCR,
-	AWA_maskb = UART_GCTL,
-	AWA_maskb_clear = UART_GCTL,
-	AWA_maskb_set = UART_GCTL,
-	AWA_maskb_toggle = UART_GCTL,
+	AWA_maska = BFIN_UART_SCR,
+	AWA_maska_clear = BFIN_UART_SCR,
+	AWA_maska_set = BFIN_UART_SCR,
+	AWA_maska_toggle = BFIN_UART_SCR,
+	AWA_maskb = BFIN_UART_GCTL,
+	AWA_maskb_clear = BFIN_UART_GCTL,
+	AWA_maskb_set = BFIN_UART_GCTL,
+	AWA_maskb_toggle = BFIN_UART_GCTL,
 	AWA_dir = SPORT1_STAT,
 	AWA_polar = SPORT1_STAT,
 	AWA_edge = SPORT1_STAT,
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 1ded945..d9ba2b1 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -151,26 +151,26 @@
 
 	/* Initialise UART - when booting from u-boot, the UART is not disabled
 	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(UART_LCR);
-	p0.l = lo(UART_LCR);
+	p0.h = hi(BFIN_UART_LCR);
+	p0.l = lo(BFIN_UART_LCR);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;	/* To enable DLL writes */
 	ssync;
 
-	p0.h = hi(UART_DLL);
-	p0.l = lo(UART_DLL);
+	p0.h = hi(BFIN_UART_DLL);
+	p0.l = lo(BFIN_UART_DLL);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;
 	ssync;
 
-	p0.h = hi(UART_DLH);
-	p0.l = lo(UART_DLH);
+	p0.h = hi(BFIN_UART_DLH);
+	p0.l = lo(BFIN_UART_DLH);
 	r0 = 0x00(Z);
 	w[p0] = r0.L;
 	ssync;
 
-	p0.h = hi(UART_GCTL);
-	p0.l = lo(UART_GCTL);
+	p0.h = hi(BFIN_UART_GCTL);
+	p0.l = lo(BFIN_UART_GCTL);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;	/* To enable UART clock */
 	ssync;
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index ac85fdf..9e9fac9 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -182,26 +182,26 @@
 
 	/* Initialise UART - when booting from u-boot, the UART is not disabled
 	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(UART_LCR);
-	p0.l = lo(UART_LCR);
+	p0.h = hi(BFIN_UART_LCR);
+	p0.l = lo(BFIN_UART_LCR);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;	/* To enable DLL writes */
 	ssync;
 
-	p0.h = hi(UART_DLL);
-	p0.l = lo(UART_DLL);
+	p0.h = hi(BFIN_UART_DLL);
+	p0.l = lo(BFIN_UART_DLL);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;
 	ssync;
 
-	p0.h = hi(UART_DLH);
-	p0.l = lo(UART_DLH);
+	p0.h = hi(BFIN_UART_DLH);
+	p0.l = lo(BFIN_UART_DLH);
 	r0 = 0x00(Z);
 	w[p0] = r0.L;
 	ssync;
 
-	p0.h = hi(UART_GCTL);
-	p0.l = lo(UART_GCTL);
+	p0.h = hi(BFIN_UART_GCTL);
+	p0.l = lo(BFIN_UART_GCTL);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;	/* To enable UART clock */
 	ssync;
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 96a3d45..279e2e8 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -139,26 +139,26 @@
 
 	/* Initialise UART - when booting from u-boot, the UART is not disabled
 	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(UART_LCR);
-	p0.l = lo(UART_LCR);
+	p0.h = hi(BFIN_UART_LCR);
+	p0.l = lo(BFIN_UART_LCR);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;	/* To enable DLL writes */
 	ssync;
 
-	p0.h = hi(UART_DLL);
-	p0.l = lo(UART_DLL);
+	p0.h = hi(BFIN_UART_DLL);
+	p0.l = lo(BFIN_UART_DLL);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;
 	ssync;
 
-	p0.h = hi(UART_DLH);
-	p0.l = lo(UART_DLH);
+	p0.h = hi(BFIN_UART_DLH);
+	p0.l = lo(BFIN_UART_DLH);
 	r0 = 0x00(Z);
 	w[p0] = r0.L;
 	ssync;
 
-	p0.h = hi(UART_GCTL);
-	p0.l = lo(UART_GCTL);
+	p0.h = hi(BFIN_UART_GCTL);
+	p0.l = lo(BFIN_UART_GCTL);
 	r0 = 0x0(Z);
 	w[p0] = r0.L;	/* To enable UART clock */
 	ssync;
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h
index 37134aa..17e1548 100644
--- a/include/asm-blackfin/mach-bf533/defBF532.h
+++ b/include/asm-blackfin/mach-bf533/defBF532.h
@@ -88,20 +88,25 @@
 #define RTC_PREN			0xFFC00314	/* RTC Prescaler Enable Register (alternate macro) */
 
 /* UART Controller (0xFFC00400 - 0xFFC004FF) */
-#define UART_THR             		 0xFFC00400	/* Transmit Holding register */
-#define UART_RBR             		 0xFFC00400	/* Receive Buffer register */
-#define UART_DLL              		 0xFFC00400	/* Divisor Latch (Low-Byte) */
-#define UART_IER              		 0xFFC00404	/* Interrupt Enable Register */
-#define UART_DLH              		 0xFFC00404	/* Divisor Latch (High-Byte) */
-#define UART_IIR              		 0xFFC00408	/* Interrupt Identification Register */
-#define UART_LCR              		 0xFFC0040C	/* Line Control Register */
-#define UART_MCR			 0xFFC00410	/* Modem Control Register */
-#define UART_LSR              		 0xFFC00414	/* Line Status Register */
+
+/*
+ * Because include/linux/serial_reg.h have defined UART_*,
+ * So we define blackfin uart regs to BFIN_UART_*.
+ */
+#define BFIN_UART_THR			0xFFC00400	/* Transmit Holding register */
+#define BFIN_UART_RBR			0xFFC00400	/* Receive Buffer register */
+#define BFIN_UART_DLL			0xFFC00400	/* Divisor Latch (Low-Byte) */
+#define BFIN_UART_IER			0xFFC00404	/* Interrupt Enable Register */
+#define BFIN_UART_DLH			0xFFC00404	/* Divisor Latch (High-Byte) */
+#define BFIN_UART_IIR			0xFFC00408	/* Interrupt Identification Register */
+#define BFIN_UART_LCR			0xFFC0040C	/* Line Control Register */
+#define BFIN_UART_MCR			0xFFC00410	/* Modem Control Register */
+#define BFIN_UART_LSR			0xFFC00414	/* Line Status Register */
 #if 0
-#define UART_MSR            		 0xFFC00418   /* Modem Status Register (UNUSED in ADSP-BF532) */
+#define BFIN_UART_MSR			0xFFC00418	/* Modem Status Register (UNUSED in ADSP-BF532) */
 #endif
-#define UART_SCR              		 0xFFC0041C	/* SCR Scratch Register */
-#define UART_GCTL      	      		 0xFFC00424	/* Global Control Register */
+#define BFIN_UART_SCR			0xFFC0041C	/* SCR Scratch Register */
+#define BFIN_UART_GCTL			0xFFC00424	/* Global Control Register */
 
 /* SPI Controller (0xFFC00500 - 0xFFC005FF) */
 #define SPI0_REGBASE          		0xFFC00500
diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/include/asm-blackfin/mach-bf537/blackfin.h
index 53fcfa3..4f10ee0 100644
--- a/include/asm-blackfin/mach-bf537/blackfin.h
+++ b/include/asm-blackfin/mach-bf537/blackfin.h
@@ -82,8 +82,6 @@
 #define STATUS_P1	0x02
 #define STATUS_P0	0x01
 
-/* UART 0*/
-
 /* DMA Channnel */
 #define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX()
 #define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val)
@@ -106,37 +104,37 @@
 /* MMR Registers*/
 #define bfin_read_UART_THR() bfin_read_UART0_THR()
 #define bfin_write_UART_THR(val) bfin_write_UART0_THR(val)
-#define UART_THR UART0_THR
+#define BFIN_UART_THR UART0_THR
 #define bfin_read_UART_RBR() bfin_read_UART0_RBR()
 #define bfin_write_UART_RBR(val) bfin_write_UART0_RBR(val)
-#define UART_RBR UART0_RBR
+#define BFIN_UART_RBR UART0_RBR
 #define bfin_read_UART_DLL() bfin_read_UART0_DLL()
 #define bfin_write_UART_DLL(val) bfin_write_UART0_DLL(val)
-#define UART_DLL UART0_DLL
+#define BFIN_UART_DLL UART0_DLL
 #define bfin_read_UART_IER() bfin_read_UART0_IER()
 #define bfin_write_UART_IER(val) bfin_write_UART0_IER(val)
-#define UART_IER UART0_IER
+#define BFIN_UART_IER UART0_IER
 #define bfin_read_UART_DLH() bfin_read_UART0_DLH()
 #define bfin_write_UART_DLH(val) bfin_write_UART0_DLH(val)
-#define UART_DLH UART0_DLH
+#define BFIN_UART_DLH UART0_DLH
 #define bfin_read_UART_IIR() bfin_read_UART0_IIR()
 #define bfin_write_UART_IIR(val) bfin_write_UART0_IIR(val)
-#define UART_IIR UART0_IIR
+#define BFIN_UART_IIR UART0_IIR
 #define bfin_read_UART_LCR() bfin_read_UART0_LCR()
 #define bfin_write_UART_LCR(val) bfin_write_UART0_LCR(val)
-#define UART_LCR UART0_LCR
+#define BFIN_UART_LCR UART0_LCR
 #define bfin_read_UART_MCR() bfin_read_UART0_MCR()
 #define bfin_write_UART_MCR(val) bfin_write_UART0_MCR(val)
-#define UART_MCR UART0_MCR
+#define BFIN_UART_MCR UART0_MCR
 #define bfin_read_UART_LSR() bfin_read_UART0_LSR()
 #define bfin_write_UART_LSR(val) bfin_write_UART0_LSR(val)
-#define UART_LSR UART0_LSR
+#define BFIN_UART_LSR UART0_LSR
 #define bfin_read_UART_SCR() bfin_read_UART0_SCR()
 #define bfin_write_UART_SCR(val) bfin_write_UART0_SCR(val)
-#define UART_SCR  UART0_SCR
+#define BFIN_UART_SCR  UART0_SCR
 #define bfin_read_UART_GCTL() bfin_read_UART0_GCTL()
 #define bfin_write_UART_GCTL(val) bfin_write_UART0_GCTL(val)
-#define UART_GCTL UART0_GCTL
+#define BFIN_UART_GCTL UART0_GCTL
 
 /* DPMC*/
 #define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h
index 3bd67da..b8509c1 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/include/asm-blackfin/mach-bf548/blackfin.h
@@ -153,17 +153,18 @@
 #define bfin_write_UART_SCR(val)	bfin_write_UART1_SCR(val)
 #define bfin_read_UART_GCTL()		bfin_read_UART1_GCTL()
 #define bfin_write_UART_GCTL(val)	bfin_write_UART1_GCTL(val)
-#define UART_THR			UART1_THR
-#define UART_RBR			UART1_RBR
-#define UART_DLL			UART1_DLL
-#define UART_IER			UART1_IER
-#define UART_DLH			UART1_DLH
-#define UART_IIR			UART1_IIR
-#define UART_LCR			UART1_LCR
-#define UART_MCR			UART1_MCR
-#define UART_LSR			UART1_LSR
-#define UART_SCR			UART1_SCR
-#define UART_GCTL			UART1_GCTL
+
+#define BFIN_UART_THR			UART1_THR
+#define BFIN_UART_RBR			UART1_RBR
+#define BFIN_UART_DLL			UART1_DLL
+#define BFIN_UART_IER			UART1_IER
+#define BFIN_UART_DLH			UART1_DLH
+#define BFIN_UART_IIR			UART1_IIR
+#define BFIN_UART_LCR			UART1_LCR
+#define BFIN_UART_MCR			UART1_MCR
+#define BFIN_UART_LSR			UART1_LSR
+#define BFIN_UART_SCR			UART1_SCR
+#define BFIN_UART_GCTL			UART1_GCTL
 
 /* PLL_DIV Masks */
 #define CCLK_DIV1 CSEL_DIV1	/* CCLK = VCO / 1 */
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h
index c3c0eb1..bee3023 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/include/asm-blackfin/mach-bf561/defBF561.h
@@ -110,18 +110,23 @@
 #define WDOGB_STAT 				0xFFC01208	/* Watchdog Status register */
 
 /* UART Controller (0xFFC00400 - 0xFFC004FF) */
-#define UART_THR             	0xFFC00400	/* Transmit Holding register */
-#define UART_RBR             	0xFFC00400	/* Receive Buffer register */
-#define UART_DLL              	0xFFC00400	/* Divisor Latch (Low-Byte) */
-#define UART_IER              	0xFFC00404	/* Interrupt Enable Register */
-#define UART_DLH              	0xFFC00404	/* Divisor Latch (High-Byte) */
-#define UART_IIR              	0xFFC00408	/* Interrupt Identification Register */
-#define UART_LCR              	0xFFC0040C	/* Line Control Register */
-#define UART_MCR			 	0xFFC00410	/* Modem Control Register */
-#define UART_LSR              	0xFFC00414	/* Line Status Register */
-#define UART_MSR            	0xFFC00418	/* Modem Status Register */
-#define UART_SCR              	0xFFC0041C	/* SCR Scratch Register */
-#define UART_GCTL      	      	0xFFC00424	/* Global Control Register */
+
+/*
+ * Because include/linux/serial_reg.h have defined UART_*,
+ * So we define blackfin uart regs to BFIN_UART0_*.
+ */
+#define BFIN_UART_THR			0xFFC00400  /* Transmit Holding register */
+#define BFIN_UART_RBR			0xFFC00400  /* Receive Buffer register */
+#define BFIN_UART_DLL			0xFFC00400  /* Divisor Latch (Low-Byte) */
+#define BFIN_UART_IER			0xFFC00404  /* Interrupt Enable Register */
+#define BFIN_UART_DLH			0xFFC00404  /* Divisor Latch (High-Byte) */
+#define BFIN_UART_IIR			0xFFC00408  /* Interrupt Identification Register */
+#define BFIN_UART_LCR			0xFFC0040C  /* Line Control Register */
+#define BFIN_UART_MCR			0xFFC00410  /* Modem Control Register */
+#define BFIN_UART_LSR			0xFFC00414  /* Line Status Register */
+#define BFIN_UART_MSR			0xFFC00418  /* Modem Status Register */
+#define BFIN_UART_SCR			0xFFC0041C  /* SCR Scratch Register */
+#define BFIN_UART_GCTL			0xFFC00424  /* Global Control Register */
 
 /* SPI Controller (0xFFC00500 - 0xFFC005FF) */
 #define SPI0_REGBASE          		0xFFC00500