include/drm/drm_dp_helper.h - fp2-dev/kernel/msm - Gitiles

 /*
  * Copyright © 2008 Keith Packard
  *
  * Permission to use, copy, modify, distribute, and sell this software and its
  * documentation for any purpose is hereby granted without fee, provided that
  * the above copyright notice appear in all copies and that both that copyright
  * notice and this permission notice appear in supporting documentation, and
  * that the name of the copyright holders not be used in advertising or
  * publicity pertaining to distribution of the software without specific,
  * written prior permission.  The copyright holders make no representations
  * about the suitability of this software for any purpose.  It is provided "as
  * is" without express or implied warranty.
  *
  * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
  * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
  * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
  * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
  * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
  * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
  * OF THIS SOFTWARE.
  */

 #ifndef _DRM_DP_HELPER_H_
 #define _DRM_DP_HELPER_H_

 #include <linux/types.h>
 #include <linux/i2c.h>

 /* From the VESA DisplayPort spec */

 #define AUX_NATIVE_WRITE	0x8
 #define AUX_NATIVE_READ		0x9
 #define AUX_I2C_WRITE		0x0
 #define AUX_I2C_READ		0x1
 #define AUX_I2C_STATUS		0x2
 #define AUX_I2C_MOT		0x4

 #define AUX_NATIVE_REPLY_ACK	(0x0 << 4)
 #define AUX_NATIVE_REPLY_NACK	(0x1 << 4)
 #define AUX_NATIVE_REPLY_DEFER	(0x2 << 4)
 #define AUX_NATIVE_REPLY_MASK	(0x3 << 4)

 #define AUX_I2C_REPLY_ACK	(0x0 << 6)
 #define AUX_I2C_REPLY_NACK	(0x1 << 6)
 #define AUX_I2C_REPLY_DEFER	(0x2 << 6)
 #define AUX_I2C_REPLY_MASK	(0x3 << 6)

 /* AUX CH addresses */
 /* DPCD */
 #define DP_DPCD_REV                         0x000

 #define DP_MAX_LINK_RATE                    0x001

 #define DP_MAX_LANE_COUNT                   0x002
 # define DP_MAX_LANE_COUNT_MASK		    0x1f
 # define DP_TPS3_SUPPORTED		    (1 << 6)
 # define DP_ENHANCED_FRAME_CAP		    (1 << 7)

 #define DP_MAX_DOWNSPREAD                   0x003
 # define DP_NO_AUX_HANDSHAKE_LINK_TRAINING  (1 << 6)

 #define DP_NORP                             0x004

 #define DP_DOWNSTREAMPORT_PRESENT           0x005
 # define DP_DWN_STRM_PORT_PRESENT           (1 << 0)
 # define DP_DWN_STRM_PORT_TYPE_MASK         0x06
 /* 00b = DisplayPort */
 /* 01b = Analog */
 /* 10b = TMDS or HDMI */
 /* 11b = Other */
 # define DP_FORMAT_CONVERSION               (1 << 3)

 #define DP_MAIN_LINK_CHANNEL_CODING         0x006

 #define DP_EDP_CONFIGURATION_CAP            0x00d
 #define DP_TRAINING_AUX_RD_INTERVAL         0x00e

 /* link configuration */
 #define	DP_LINK_BW_SET		            0x100
 # define DP_LINK_BW_1_62		    0x06
 # define DP_LINK_BW_2_7			    0x0a
 # define DP_LINK_BW_5_4			    0x14

 #define DP_LANE_COUNT_SET	            0x101
 # define DP_LANE_COUNT_MASK		    0x0f
 # define DP_LANE_COUNT_ENHANCED_FRAME_EN    (1 << 7)

 #define DP_TRAINING_PATTERN_SET	            0x102
 # define DP_TRAINING_PATTERN_DISABLE	    0
 # define DP_TRAINING_PATTERN_1		    1
 # define DP_TRAINING_PATTERN_2		    2
 # define DP_TRAINING_PATTERN_3		    3
 # define DP_TRAINING_PATTERN_MASK	    0x3

 # define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
 # define DP_LINK_QUAL_PATTERN_D10_2	    (1 << 2)
 # define DP_LINK_QUAL_PATTERN_ERROR_RATE    (2 << 2)
 # define DP_LINK_QUAL_PATTERN_PRBS7	    (3 << 2)
 # define DP_LINK_QUAL_PATTERN_MASK	    (3 << 2)

 # define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
 # define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)

 # define DP_SYMBOL_ERROR_COUNT_BOTH	    (0 << 6)
 # define DP_SYMBOL_ERROR_COUNT_DISPARITY    (1 << 6)
 # define DP_SYMBOL_ERROR_COUNT_SYMBOL	    (2 << 6)
 # define DP_SYMBOL_ERROR_COUNT_MASK	    (3 << 6)

 #define DP_TRAINING_LANE0_SET		    0x103
 #define DP_TRAINING_LANE1_SET		    0x104
 #define DP_TRAINING_LANE2_SET		    0x105
 #define DP_TRAINING_LANE3_SET		    0x106

 # define DP_TRAIN_VOLTAGE_SWING_MASK	    0x3
 # define DP_TRAIN_VOLTAGE_SWING_SHIFT	    0
 # define DP_TRAIN_MAX_SWING_REACHED	    (1 << 2)
 # define DP_TRAIN_VOLTAGE_SWING_400	    (0 << 0)
 # define DP_TRAIN_VOLTAGE_SWING_600	    (1 << 0)
 # define DP_TRAIN_VOLTAGE_SWING_800	    (2 << 0)
 # define DP_TRAIN_VOLTAGE_SWING_1200	    (3 << 0)

 # define DP_TRAIN_PRE_EMPHASIS_MASK	    (3 << 3)
 # define DP_TRAIN_PRE_EMPHASIS_0	    (0 << 3)
 # define DP_TRAIN_PRE_EMPHASIS_3_5	    (1 << 3)
 # define DP_TRAIN_PRE_EMPHASIS_6	    (2 << 3)
 # define DP_TRAIN_PRE_EMPHASIS_9_5	    (3 << 3)

 # define DP_TRAIN_PRE_EMPHASIS_SHIFT	    3
 # define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED  (1 << 5)

 #define DP_DOWNSPREAD_CTRL		    0x107
 # define DP_SPREAD_AMP_0_5		    (1 << 4)

 #define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
 # define DP_SET_ANSI_8B10B		    (1 << 0)

 #define DP_EDP_CONFIGURATION_SET            0x10a

 #define DP_LANE0_1_STATUS		    0x202
 #define DP_LANE2_3_STATUS		    0x203
 # define DP_LANE_CR_DONE		    (1 << 0)
 # define DP_LANE_CHANNEL_EQ_DONE	    (1 << 1)
 # define DP_LANE_SYMBOL_LOCKED		    (1 << 2)

 #define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE |		\
 			    DP_LANE_CHANNEL_EQ_DONE |	\
 			    DP_LANE_SYMBOL_LOCKED)

 #define DP_LANE_ALIGN_STATUS_UPDATED	    0x204

 #define DP_INTERLANE_ALIGN_DONE		    (1 << 0)
 #define DP_DOWNSTREAM_PORT_STATUS_CHANGED   (1 << 6)
 #define DP_LINK_STATUS_UPDATED		    (1 << 7)

 #define DP_SINK_STATUS			    0x205

 #define DP_RECEIVE_PORT_0_STATUS	    (1 << 0)
 #define DP_RECEIVE_PORT_1_STATUS	    (1 << 1)

 #define DP_ADJUST_REQUEST_LANE0_1	    0x206
 #define DP_ADJUST_REQUEST_LANE2_3	    0x207
 # define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK  0x03
 # define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
 # define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK   0x0c
 # define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT  2
 # define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK  0x30
 # define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
 # define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK   0xc0
 # define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT  6

 #define DP_SET_POWER                        0x600
 # define DP_SET_POWER_D0                    0x1
 # define DP_SET_POWER_D3                    0x2

 #define MODE_I2C_START	1
 #define MODE_I2C_WRITE	2
 #define MODE_I2C_READ	4
 #define MODE_I2C_STOP	8

 struct i2c_algo_dp_aux_data {
 	bool running;
 	u16 address;
 	int (*aux_ch) (struct i2c_adapter *adapter,
 		       int mode, uint8_t write_byte,
 		       uint8_t *read_byte);
 };

 int
 i2c_dp_aux_add_bus(struct i2c_adapter *adapter);

 #endif /* _DRM_DP_HELPER_H_ */
	/*
	* Copyright © 2008 Keith Packard
	*
	* Permission to use, copy, modify, distribute, and sell this software and its
	* documentation for any purpose is hereby granted without fee, provided that
	* the above copyright notice appear in all copies and that both that copyright
	* notice and this permission notice appear in supporting documentation, and
	* that the name of the copyright holders not be used in advertising or
	* publicity pertaining to distribution of the software without specific,
	* written prior permission. The copyright holders make no representations
	* about the suitability of this software for any purpose. It is provided "as
	* is" without express or implied warranty.
	*
	* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
	* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
	* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
	* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
	* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
	* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
	* OF THIS SOFTWARE.
	*/

	#ifndef _DRM_DP_HELPER_H_
	#define _DRM_DP_HELPER_H_

	#include <linux/types.h>
	#include <linux/i2c.h>

	/* From the VESA DisplayPort spec */

	#define AUX_NATIVE_WRITE 0x8
	#define AUX_NATIVE_READ 0x9
	#define AUX_I2C_WRITE 0x0
	#define AUX_I2C_READ 0x1
	#define AUX_I2C_STATUS 0x2
	#define AUX_I2C_MOT 0x4

	#define AUX_NATIVE_REPLY_ACK (0x0 << 4)
	#define AUX_NATIVE_REPLY_NACK (0x1 << 4)
	#define AUX_NATIVE_REPLY_DEFER (0x2 << 4)
	#define AUX_NATIVE_REPLY_MASK (0x3 << 4)

	#define AUX_I2C_REPLY_ACK (0x0 << 6)
	#define AUX_I2C_REPLY_NACK (0x1 << 6)
	#define AUX_I2C_REPLY_DEFER (0x2 << 6)
	#define AUX_I2C_REPLY_MASK (0x3 << 6)

	/* AUX CH addresses */
	/* DPCD */
	#define DP_DPCD_REV 0x000

	#define DP_MAX_LINK_RATE 0x001

	#define DP_MAX_LANE_COUNT 0x002
	# define DP_MAX_LANE_COUNT_MASK 0x1f
	# define DP_TPS3_SUPPORTED (1 << 6)
	# define DP_ENHANCED_FRAME_CAP (1 << 7)

	#define DP_MAX_DOWNSPREAD 0x003
	# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING (1 << 6)

	#define DP_NORP 0x004

	#define DP_DOWNSTREAMPORT_PRESENT 0x005
	# define DP_DWN_STRM_PORT_PRESENT (1 << 0)
	# define DP_DWN_STRM_PORT_TYPE_MASK 0x06
	/* 00b = DisplayPort */
	/* 01b = Analog */
	/* 10b = TMDS or HDMI */
	/* 11b = Other */
	# define DP_FORMAT_CONVERSION (1 << 3)

	#define DP_MAIN_LINK_CHANNEL_CODING 0x006

	#define DP_EDP_CONFIGURATION_CAP 0x00d
	#define DP_TRAINING_AUX_RD_INTERVAL 0x00e

	/* link configuration */
	#define DP_LINK_BW_SET 0x100
	# define DP_LINK_BW_1_62 0x06
	# define DP_LINK_BW_2_7 0x0a
	# define DP_LINK_BW_5_4 0x14

	#define DP_LANE_COUNT_SET 0x101
	# define DP_LANE_COUNT_MASK 0x0f
	# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7)

	#define DP_TRAINING_PATTERN_SET 0x102
	# define DP_TRAINING_PATTERN_DISABLE 0
	# define DP_TRAINING_PATTERN_1 1
	# define DP_TRAINING_PATTERN_2 2
	# define DP_TRAINING_PATTERN_3 3
	# define DP_TRAINING_PATTERN_MASK 0x3

	# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2)
	# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2)
	# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2)
	# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2)
	# define DP_LINK_QUAL_PATTERN_MASK (3 << 2)

	# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4)
	# define DP_LINK_SCRAMBLING_DISABLE (1 << 5)

	# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6)
	# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6)
	# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6)
	# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6)

	#define DP_TRAINING_LANE0_SET 0x103
	#define DP_TRAINING_LANE1_SET 0x104
	#define DP_TRAINING_LANE2_SET 0x105
	#define DP_TRAINING_LANE3_SET 0x106

	# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3
	# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0
	# define DP_TRAIN_MAX_SWING_REACHED (1 << 2)
	# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0)
	# define DP_TRAIN_VOLTAGE_SWING_600 (1 << 0)
	# define DP_TRAIN_VOLTAGE_SWING_800 (2 << 0)
	# define DP_TRAIN_VOLTAGE_SWING_1200 (3 << 0)

	# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3)
	# define DP_TRAIN_PRE_EMPHASIS_0 (0 << 3)
	# define DP_TRAIN_PRE_EMPHASIS_3_5 (1 << 3)
	# define DP_TRAIN_PRE_EMPHASIS_6 (2 << 3)
	# define DP_TRAIN_PRE_EMPHASIS_9_5 (3 << 3)

	# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3
	# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5)

	#define DP_DOWNSPREAD_CTRL 0x107
	# define DP_SPREAD_AMP_0_5 (1 << 4)

	#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108
	# define DP_SET_ANSI_8B10B (1 << 0)

	#define DP_EDP_CONFIGURATION_SET 0x10a

	#define DP_LANE0_1_STATUS 0x202
	#define DP_LANE2_3_STATUS 0x203
	# define DP_LANE_CR_DONE (1 << 0)
	# define DP_LANE_CHANNEL_EQ_DONE (1 << 1)
	# define DP_LANE_SYMBOL_LOCKED (1 << 2)

	#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE \| \
	DP_LANE_CHANNEL_EQ_DONE \| \
	DP_LANE_SYMBOL_LOCKED)

	#define DP_LANE_ALIGN_STATUS_UPDATED 0x204

	#define DP_INTERLANE_ALIGN_DONE (1 << 0)
	#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6)
	#define DP_LINK_STATUS_UPDATED (1 << 7)

	#define DP_SINK_STATUS 0x205

	#define DP_RECEIVE_PORT_0_STATUS (1 << 0)
	#define DP_RECEIVE_PORT_1_STATUS (1 << 1)

	#define DP_ADJUST_REQUEST_LANE0_1 0x206
	#define DP_ADJUST_REQUEST_LANE2_3 0x207
	# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03
	# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
	# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c
	# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2
	# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30
	# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
	# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0
	# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6

	#define DP_SET_POWER 0x600
	# define DP_SET_POWER_D0 0x1
	# define DP_SET_POWER_D3 0x2

	#define MODE_I2C_START 1
	#define MODE_I2C_WRITE 2
	#define MODE_I2C_READ 4
	#define MODE_I2C_STOP 8

	struct i2c_algo_dp_aux_data {
	bool running;
	u16 address;
	int (aux_ch) (struct i2c_adapter adapter,
	int mode, uint8_t write_byte,
	uint8_t *read_byte);
	};

	int
	i2c_dp_aux_add_bus(struct i2c_adapter *adapter);

	#endif /* _DRM_DP_HELPER_H_ */