Merge "msm: defconfig changes required by WLAN for msm7630." into msm-3.0
diff --git a/arch/arm/mach-msm/board-msm7x27a-regulator.c b/arch/arm/mach-msm/board-msm7x27a-regulator.c
index 19e9285..1a3bb75 100644
--- a/arch/arm/mach-msm/board-msm7x27a-regulator.c
+++ b/arch/arm/mach-msm/board-msm7x27a-regulator.c
@@ -205,7 +205,7 @@
PCOM_VREG_LDO(ldo02, 13, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0),
PCOM_VREG_LDO(ldo03, 49, NULL, 1200000, 1200000, 0, -1, 0, 0, 0, 0),
PCOM_VREG_LDO(ldo04, 50, NULL, 1100000, 1100000, 0, -1, 0, 0, 0, 0),
- PCOM_VREG_LDO(ldo05, 45, NULL, 1300000, 1300000, 0, -1, 0, 0, 0, 0),
+ PCOM_VREG_LDO(ldo05, 45, NULL, 1300000, 1350000, 0, -1, 0, 0, 0, 0),
PCOM_VREG_LDO(ldo06, 51, NULL, 1200000, 1200000, 0, -1, 0, 0, 0, 0),
PCOM_VREG_LDO(ldo07, 0, NULL, 2600000, 2600000, 0, -1, 0, 0, 0, 0),
PCOM_VREG_LDO(ldo08, 9, NULL, 2850000, 2850000, 0, -1, 0, 0, 0, 0),
@@ -217,9 +217,9 @@
PCOM_VREG_LDO(ldo14, 16, NULL, 3300000, 3300000, 0, -1, 0, 0, 0, 0),
PCOM_VREG_LDO(ldo15, 54, NULL, 1800000, 2850000, 0, -1, 0, 0, 0, 0),
PCOM_VREG_LDO(ldo16, 19, NULL, 1800000, 2850000, 0, -1, 0, 0, 0, 0),
- PCOM_VREG_LDO(ldo17, 56, NULL, 2900000, 3000000, 0, -1, 0, 0, 0, 0),
+ PCOM_VREG_LDO(ldo17, 56, NULL, 2900000, 3300000, 0, -1, 0, 0, 0, 0),
PCOM_VREG_LDO(ldo18, 11, NULL, 2700000, 2700000, 0, -1, 0, 0, 0, 0),
- PCOM_VREG_LDO(ldo19, 57, NULL, 1200000, 1200000, 0, -1, 0, 0, 0, 0),
+ PCOM_VREG_LDO(ldo19, 57, NULL, 1200000, 1800000, 0, -1, 0, 0, 0, 0),
PCOM_VREG_NCP(ncp, 31, NULL, -1800000, -1800000, 0, 0, 0, 0, 0),
};
diff --git a/arch/arm/mach-msm/board-msm7x27a.c b/arch/arm/mach-msm/board-msm7x27a.c
index 56c135d..ca1da75 100644
--- a/arch/arm/mach-msm/board-msm7x27a.c
+++ b/arch/arm/mach-msm/board-msm7x27a.c
@@ -466,13 +466,14 @@
struct bt_vreg_info {
const char *name;
unsigned int pmapp_id;
- unsigned int level;
+ unsigned int min_level;
+ unsigned int max_level;
unsigned int is_pin_controlled;
struct regulator *reg;
};
static struct bt_vreg_info bt_vregs[] = {
- {"msme1", 2, 1800000, 0, NULL},
- {"bt", 21, 2900000, 1, NULL}
+ {"msme1", 2, 1800000, 1800000, 0, NULL},
+ {"bt", 21, 2900000, 3050000, 1, NULL}
};
static int bahama_bt(int on)
@@ -640,7 +641,8 @@
}
rc = on ? regulator_set_voltage(bt_vregs[i].reg,
- bt_vregs[i].level, bt_vregs[i].level) : 0;
+ bt_vregs[i].min_level,
+ bt_vregs[i].max_level) : 0;
if (rc) {
dev_err(&msm_bt_power_device.dev,
"%s: could not set voltage for %s: %d\n",
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 31754c4..03307f0 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -6744,6 +6744,7 @@
.pwm_ch_id = 1, /*channel id*/
/*gpio to enable haptic*/
.hap_en_gpio = PM8058_GPIO_PM_TO_SYS(PMIC_GPIO_HAP_ENABLE),
+ .hap_len_gpio = -1,
.max_timeout = 15000,
.mode_ctrl = PWM_GEN_MODE,
.pwm_fd = {
diff --git a/arch/arm/mach-msm/clock-7x30.c b/arch/arm/mach-msm/clock-7x30.c
index c50b93f..5df1700 100644
--- a/arch/arm/mach-msm/clock-7x30.c
+++ b/arch/arm/mach-msm/clock-7x30.c
@@ -68,7 +68,6 @@
#define MI2S_NS_REG REG(0x02E0)
#define MI2S_RX_NS_REG REG(0x0070)
#define MI2S_TX_NS_REG REG(0x0078)
-#define MIDI_NS_REG REG(0x02D0)
#define PLL_ENA_REG REG(0x0264)
#define PMDH_NS_REG REG(0x008C)
#define SDAC_NS_REG REG(0x009C)
@@ -1693,34 +1692,6 @@
},
};
-static struct clk_freq_tbl clk_tbl_midi[] = {
- F_MND8( 0, 0, 0, gnd, 1, 0, 0),
- F_MND8(98304000, 19, 12, pll3, 3, 2, 5),
- F_END,
-};
-
-static struct rcg_clk midi_clk = {
- .b = {
- .ctl_reg = MIDI_NS_REG,
- .en_mask = BIT(9),
- .halt_reg = CLK_HALT_STATEC_REG,
- .halt_bit = 1,
- },
- .ns_reg = MIDI_NS_REG,
- .md_reg = MIDI_NS_REG - 4,
- .ns_mask = F_MASK_MND8(19, 12),
- .root_en_mask = BIT(11),
- .freq_tbl = clk_tbl_midi,
- .current_freq = &rcg_dummy_freq,
- .set_rate = set_rate_mnd,
- .c = {
- .dbg_name = "midi_clk",
- .ops = &clk_ops_rcg_7x30,
- VDD_DIG_FMAX_MAP1(NOMINAL, 98304000),
- CLK_INIT(midi_clk.c),
- },
-};
-
#define F_SDAC(f, s, div, m, n) \
{ \
.freq_hz = f, \
@@ -2454,7 +2425,6 @@
{ CLK_TEST_2(0x07), &lpa_p_clk.c },
{ CLK_TEST_2(0x08), &usb_hs2_p_clk.c },
{ CLK_TEST_2(0x09), &spi_clk.c },
- { CLK_TEST_2(0x0A), &midi_clk.c },
{ CLK_TEST_2(0x0B), &i2c_2_clk.c },
{ CLK_TEST_2(0x0D), &mi2s_m_clk.c },
{ CLK_TEST_2(0x0E), &lpa_core_clk.c },
@@ -2819,8 +2789,6 @@
OWN(APPS1, 12, "mi2s_codec_rx_s_clk", mi2s_codec_rx_s_clk, NULL),
OWN(APPS1, 14, "mi2s_codec_tx_m_clk", mi2s_codec_tx_m_clk, NULL),
OWN(APPS1, 14, "mi2s_codec_tx_s_clk", mi2s_codec_tx_s_clk, NULL),
- { CLK_LOOKUP("midi_clk", midi_clk.c, NULL),
- O(APPS1), BIT(22) },
OWN(APPS1, 26, "sdac_clk", sdac_clk, NULL),
OWN(APPS1, 26, "sdac_m_clk", sdac_m_clk, NULL),
OWN(APPS1, 8, "vfe_clk", vfe_clk, NULL),
@@ -3008,7 +2976,6 @@
clk_set_rate(&uart1_clk.c, 19200000);
clk_set_rate(&uart2_clk.c, 19200000);
clk_set_rate(&mi2s_m_clk.c, 12288000);
- clk_set_rate(&midi_clk.c, 98304000);
clk_set_rate(&mdp_vsync_clk.c, 24576000);
clk_set_rate(&glbl_root_clk.c, 1);
clk_set_rate(&mdc_clk.c, 1);
diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c
index 969a1c6..397fdea 100644
--- a/arch/arm/mach-msm/devices-iommu.c
+++ b/arch/arm/mach-msm/devices-iommu.c
@@ -1057,9 +1057,11 @@
static int __init iommu_init(void)
{
int ret;
-
- if (cpu_is_msm8960() &&
- SOCINFO_VERSION_MAJOR(socinfo_get_version()) < 2) {
+ if ((cpu_is_msm8960() &&
+ SOCINFO_VERSION_MAJOR(socinfo_get_version()) < 2) ||
+ (cpu_is_msm8x60() &&
+ (SOCINFO_VERSION_MAJOR(socinfo_get_version()) != 2 ||
+ SOCINFO_VERSION_MINOR(socinfo_get_version()) < 1))) {
pr_err("IOMMU is not supported on this SoC version.\n");
return -ENODEV;
}
diff --git a/drivers/mfd/pm8xxx-misc.c b/drivers/mfd/pm8xxx-misc.c
index 00ac2ab..7367e66 100644
--- a/drivers/mfd/pm8xxx-misc.c
+++ b/drivers/mfd/pm8xxx-misc.c
@@ -53,6 +53,12 @@
#define PM8901_REGULATOR_PMR_STATE_MASK 0x60
#define PM8901_REGULATOR_PMR_STATE_OFF 0x20
+/* GPIO UART MUX CTRL registers */
+#define REG_PM8XXX_GPIO_MUX_CTRL 0x1CC
+
+#define UART_PATH_SEL_MASK 0x60
+#define UART_PATH_SEL_SHIFT 0x5
+
struct pm8xxx_misc_chip {
struct list_head link;
struct pm8xxx_misc_platform_data pdata;
@@ -260,6 +266,47 @@
}
EXPORT_SYMBOL_GPL(pm8xxx_reset_pwr_off);
+/**
+ * pm8xxx_uart_gpio_mux_ctrl - Mux configuration to select the UART
+ *
+ * @uart_path_sel: Input argument to select either UART1/2/3
+ *
+ * RETURNS: an appropriate -ERRNO error value on error, or zero for success.
+ */
+int pm8xxx_uart_gpio_mux_ctrl(enum pm8xxx_uart_path_sel uart_path_sel)
+{
+ struct pm8xxx_misc_chip *chip;
+ unsigned long flags;
+ int rc = 0;
+
+ spin_lock_irqsave(&pm8xxx_misc_chips_lock, flags);
+
+ /* Loop over all attached PMICs and call specific functions for them. */
+ list_for_each_entry(chip, &pm8xxx_misc_chips, link) {
+ switch (chip->version) {
+ case PM8XXX_VERSION_8018:
+ case PM8XXX_VERSION_8058:
+ case PM8XXX_VERSION_8921:
+ rc = pm8xxx_misc_masked_write(chip,
+ REG_PM8XXX_GPIO_MUX_CTRL, UART_PATH_SEL_MASK,
+ uart_path_sel << UART_PATH_SEL_SHIFT);
+ break;
+ default:
+ /* Functionality not supported */
+ break;
+ }
+ if (rc) {
+ pr_err("uart_gpio_mux_ctrl failed, rc=%d\n", rc);
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&pm8xxx_misc_chips_lock, flags);
+
+ return rc;
+}
+EXPORT_SYMBOL(pm8xxx_uart_gpio_mux_ctrl);
+
static int __devinit pm8xxx_misc_probe(struct platform_device *pdev)
{
const struct pm8xxx_misc_platform_data *pdata = pdev->dev.platform_data;
diff --git a/drivers/net/wireless/libra/qcomwlan7x27a_pwrif.c b/drivers/net/wireless/libra/qcomwlan7x27a_pwrif.c
index 5da7a42..82625b5 100644
--- a/drivers/net/wireless/libra/qcomwlan7x27a_pwrif.c
+++ b/drivers/net/wireless/libra/qcomwlan7x27a_pwrif.c
@@ -32,7 +32,8 @@
struct wlan_vreg_info {
const char *vreg_id;
- unsigned int vreg_level;
+ unsigned int level_min;
+ unsigned int level_max;
unsigned int pmapp_id;
unsigned int is_vreg_pin_controlled;
struct regulator *reg;
@@ -40,12 +41,12 @@
static struct wlan_vreg_info vreg_info[] = {
- {"bt", 3050000, 21, 1, NULL},
- {"msme1", 1800000, 2, 0, NULL},
- {"wlan_tcx0", 1800000, 53, 0, NULL},
- {"wlan4", 1200000, 23, 0, NULL},
- {"wlan2", 1350000, 9, 1, NULL},
- {"wlan3", 1200000, 10, 1, NULL},
+ {"bt", 3050000, 3050000, 21, 1, NULL},
+ {"msme1", 1800000, 1800000, 2, 0, NULL},
+ {"wlan_tcx0", 1800000, 1800000, 53, 0, NULL},
+ {"wlan4", 1200000, 1200000, 23, 0, NULL},
+ {"wlan2", 1350000, 1350000, 9, 1, NULL},
+ {"wlan3", 1200000, 1200000, 10, 1, NULL},
};
static int qrf6285_init_regs(void)
@@ -55,8 +56,8 @@
for (i = 0; i < ARRAY_SIZE(regs); i++) {
regs[i].supply = vreg_info[i].vreg_id;
- regs[i].min_uV = vreg_info[i].vreg_level;
- regs[i].max_uV = vreg_info[i].vreg_level;
+ regs[i].min_uV = vreg_info[i].level_min;
+ regs[i].max_uV = vreg_info[i].level_max;
}
rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs), regs);
@@ -128,8 +129,8 @@
if (on) {
rc = regulator_set_voltage(vreg_info[index].reg,
- vreg_info[index].vreg_level,
- vreg_info[index].vreg_level);
+ vreg_info[index].level_min,
+ vreg_info[index].level_max);
if (rc) {
pr_err("%s:%s set voltage failed %d\n",
__func__, vreg_info[index].vreg_id, rc);
diff --git a/include/linux/mfd/pm8xxx/misc.h b/include/linux/mfd/pm8xxx/misc.h
index 17ec31b..2374d11 100644
--- a/include/linux/mfd/pm8xxx/misc.h
+++ b/include/linux/mfd/pm8xxx/misc.h
@@ -28,6 +28,13 @@
int priority;
};
+enum pm8xxx_uart_path_sel {
+ UART_NONE,
+ UART_TX1_RX1,
+ UART_TX2_RX2,
+ UART_TX3_RX3,
+};
+
#if defined(CONFIG_MFD_PM8XXX_MISC) || defined(CONFIG_MFD_PM8XXX_MISC_MODULE)
/**
@@ -39,6 +46,8 @@
*/
int pm8xxx_reset_pwr_off(int reset);
+int pm8xxx_uart_gpio_mux_ctrl(enum pm8xxx_uart_path_sel uart_path_sel);
+
#else
static inline int pm8xxx_reset_pwr_off(int reset)
@@ -46,6 +55,12 @@
return -ENODEV;
}
+static inline int
+pm8xxx_uart_gpio_mux_ctrl(enum pm8xxx_uart_path_sel uart_path_sel)
+{
+ return -ENODEV;
+}
+
#endif
#endif
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 0097136..b43a097 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -379,9 +379,18 @@
extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
extern void usb_put_hcd(struct usb_hcd *hcd);
extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
+#ifdef CONFIG_USB
extern int usb_add_hcd(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags);
extern void usb_remove_hcd(struct usb_hcd *hcd);
+#else
+static inline int
+usb_add_hcd(struct usb_hcd *hcd, unsigned int irqnum, unsigned long irqflags)
+{
+ return 0;
+}
+static inline void usb_remove_hcd(struct usb_hcd *hcd) {}
+#endif
struct platform_device;
extern void usb_hcd_platform_shutdown(struct platform_device *dev);