blob: 52842e6e86e6ce6954f0515db99e8257d4ff55af [file] [log] [blame]
/* linux/arch/arm/mach-s3c2410/cpu.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX CPU Support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-serial.h>
#include "cpu.h"
#include "devs.h"
#include "clock.h"
#include "s3c2400.h"
#include "s3c2410.h"
#include "s3c244x.h"
#include "s3c2440.h"
#include "s3c2442.h"
struct cpu_table {
unsigned long idcode;
unsigned long idmask;
void (*map_io)(struct map_desc *mach_desc, int size);
void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no);
void (*init_clocks)(int xtal);
int (*init)(void);
const char *name;
};
/* table of supported CPUs */
static const char name_s3c2400[] = "S3C2400";
static const char name_s3c2410[] = "S3C2410";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
static const char name_s3c2410a[] = "S3C2410A";
static const char name_s3c2440a[] = "S3C2440A";
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = 0x32410000,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
.init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410_init,
.name = name_s3c2410
},
{
.idcode = 0x32410002,
.idmask = 0xffffffff,
.map_io = s3c2410_map_io,
.init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
.init = s3c2410_init,
.name = name_s3c2410a
},
{
.idcode = 0x32440000,
.idmask = 0xffffffff,
.map_io = s3c244x_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440
},
{
.idcode = 0x32440001,
.idmask = 0xffffffff,
.map_io = s3c244x_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
.name = name_s3c2440a
},
{
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
.map_io = s3c244x_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
.name = name_s3c2442
},
{
.idcode = 0x0, /* S3C2400 doesn't have an idcode */
.idmask = 0xffffffff,
.map_io = s3c2400_map_io,
.init_clocks = s3c2400_init_clocks,
.init_uarts = s3c2400_init_uarts,
.init = s3c2400_init,
.name = name_s3c2400
},
};
/* minimal IO mapping */
static struct map_desc s3c_iodesc[] __initdata = {
IODESC_ENT(GPIO),
IODESC_ENT(IRQ),
IODESC_ENT(MEMCTRL),
IODESC_ENT(UART)
};
static struct cpu_table *
s3c_lookup_cpu(unsigned long idcode)
{
struct cpu_table *tab;
int count;
tab = cpu_ids;
for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) {
if ((idcode & tab->idmask) == tab->idcode)
return tab;
}
return NULL;
}
/* board information */
static struct s3c24xx_board *board;
void s3c24xx_set_board(struct s3c24xx_board *b)
{
int i;
board = b;
if (b->clocks_count != 0) {
struct clk **ptr = b->clocks;
for (i = b->clocks_count; i > 0; i--, ptr++)
s3c24xx_register_clock(*ptr);
}
}
/* cpu information */
static struct cpu_table *cpu;
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
unsigned long idcode = 0x0;
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
#ifndef CONFIG_CPU_S3C2400
idcode = __raw_readl(S3C2410_GSTATUS1);
#endif
cpu = s3c_lookup_cpu(idcode);
if (cpu == NULL) {
printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
panic("Unknown S3C24XX CPU");
}
printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
if (cpu->map_io == NULL || cpu->init == NULL) {
printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
panic("Unsupported S3C24XX CPU");
}
(cpu->map_io)(mach_desc, size);
}
/* s3c24xx_init_clocks
*
* Initialise the clock subsystem and associated information from the
* given master crystal value.
*
* xtal = 0 -> use default PLL crystal value (normally 12MHz)
* != 0 -> PLL crystal value in Hz
*/
void __init s3c24xx_init_clocks(int xtal)
{
if (xtal == 0)
xtal = 12*1000*1000;
if (cpu == NULL)
panic("s3c24xx_init_clocks: no cpu setup?\n");
if (cpu->init_clocks == NULL)
panic("s3c24xx_init_clocks: cpu has no clock init\n");
else
(cpu->init_clocks)(xtal);
}
/* uart management */
static int nr_uarts __initdata = 0;
static struct s3c2410_uartcfg uart_cfgs[3];
/* s3c24xx_init_uartdevs
*
* copy the specified platform data and configuration into our central
* set of devices, before the data is thrown away after the init process.
*
* This also fills in the array passed to the serial driver for the
* early initialisation of the console.
*/
void __init s3c24xx_init_uartdevs(char *name,
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no)
{
struct platform_device *platdev;
struct s3c2410_uartcfg *cfgptr = uart_cfgs;
struct s3c24xx_uart_resources *resp;
int uart;
memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
platdev = s3c24xx_uart_src[cfgptr->hwport];
resp = res + cfgptr->hwport;
s3c24xx_uart_devs[uart] = platdev;
platdev->name = name;
platdev->resource = resp->resources;
platdev->num_resources = resp->nr_resources;
platdev->dev.platform_data = cfgptr;
}
nr_uarts = no;
}
void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
if (cpu == NULL)
return;
if (cpu->init_uarts == NULL) {
printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
} else
(cpu->init_uarts)(cfg, no);
}
static int __init s3c_arch_init(void)
{
int ret;
// do the correct init for cpu
if (cpu == NULL)
panic("s3c_arch_init: NULL cpu\n");
ret = (cpu->init)();
if (ret != 0)
return ret;
ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
if (ret != 0)
return ret;
if (board != NULL) {
struct platform_device **ptr = board->devices;
int i;
for (i = 0; i < board->devices_count; i++, ptr++) {
ret = platform_device_register(*ptr);
if (ret) {
printk(KERN_ERR "s3c24xx: failed to add board device %s (%d) @%p\n", (*ptr)->name, ret, *ptr);
}
}
/* mask any error, we may not need all these board
* devices */
ret = 0;
}
return ret;
}
arch_initcall(s3c_arch_init);