OMAP2+: powerdomain: move header file from plat-omap to mach-omap2
The OMAP powerdomain code and data is all OMAP2+-specific. This seems
unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h
to mach-omap2/powerdomain.h. The primary point of doing this is to remove
the temptation for unrelated upper-layer code to access powerdomain code
and data directly.
As part of this process, remove the references to powerdomain data
from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap.
Change the DSPBridge code to point to the new location for the
powerdomain headers. The DSPBridge code should not be including the
powerdomain headers; these should be removed.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 650bf68..e20b986 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -34,7 +34,7 @@
#include "prcm44xx.h"
#include <plat/clock.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/prcm.h>
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 372c646..de3faa2 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -18,7 +18,7 @@
#include <linux/init.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include <plat/clock.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index f518270..f3e043f 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -27,7 +27,7 @@
#include <plat/prcm.h>
#include <plat/irqs.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/serial.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 545182d..e66687b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -39,7 +39,7 @@
#include "io.h"
#include <plat/omap-pm.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/omap_hwmod.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e1358ba..12856eb 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -140,7 +140,7 @@
#include <plat/common.h>
#include <plat/cpu.h>
#include "clockdomain.h"
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include <plat/clock.h>
#include <plat/omap_hwmod.h>
#include <plat/prcm.h>
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 3f98989..e535082 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -29,7 +29,7 @@
#include <plat/clock.h>
#include <plat/board.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/dmtimer.h>
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 24228e9..227a211 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -18,7 +18,7 @@
#include <plat/omap_device.h>
#include <plat/common.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include "clockdomain.h"
static struct omap_device_pm_latency *pm_lats;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 8b4f45e..482df7f 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,7 +11,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
#define __ARCH_ARM_MACH_OMAP2_PM_H
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
extern void *omap3_secure_ram_storage;
extern void omap3_pm_off_mode_enable(int);
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index f6aef76..2844b84 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -50,7 +50,7 @@
#include "pm.h"
#include "control.h"
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include "clockdomain.h"
#ifdef CONFIG_SUSPEND
@@ -120,7 +120,7 @@
l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
- omap2_gpio_prepare_for_idle(PWRDM_POWER_RET);
+ omap2_gpio_prepare_for_idle(0);
if (omap2_pm_debug) {
omap2_pm_dump(0, 0, 0);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 0fae3d6..5efd1fb 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -32,7 +32,7 @@
#include <plat/sram.h>
#include "clockdomain.h"
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include <plat/serial.h>
#include <plat/sdrc.h>
#include <plat/prcm.h>
@@ -360,6 +360,7 @@
int mpu_next_state = PWRDM_POWER_ON;
int per_next_state = PWRDM_POWER_ON;
int core_next_state = PWRDM_POWER_ON;
+ int per_going_off;
int core_prev_state, per_prev_state;
u32 sdrc_pwr = 0;
@@ -411,9 +412,10 @@
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
+ per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
omap_uart_prepare_idle(2);
omap_uart_prepare_idle(3);
- omap2_gpio_prepare_for_idle(per_next_state);
+ omap2_gpio_prepare_for_idle(per_going_off);
if (per_next_state == PWRDM_POWER_OFF)
omap3_per_save_context();
}
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 6aff996..e9f4862c 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -16,7 +16,7 @@
#include <linux/err.h>
#include <linux/slab.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include <mach/omap4-common.h>
struct power_state {
diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c
index cb01c7a..171fccd 100644
--- a/arch/arm/mach-omap2/powerdomain-common.c
+++ b/arch/arm/mach-omap2/powerdomain-common.c
@@ -20,7 +20,6 @@
#include "cm-regbits-44xx.h"
#include "prm-regbits-34xx.h"
#include "prm-regbits-44xx.h"
-#include "powerdomains.h"
/*
* OMAP3 and OMAP4 specific register bit initialisations
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 7eb7ba4..06ef60e 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -26,7 +26,7 @@
#include "prm44xx.h"
#include <plat/cpu.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include "clockdomain.h"
#include <plat/prcm.h>
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
new file mode 100644
index 0000000..35b5b48
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -0,0 +1,232 @@
+/*
+ * OMAP2/3/4 powerdomain control
+ *
+ * Copyright (C) 2007-2008, 2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX This should be moved to the mach-omap2/ directory at the earliest
+ * opportunity.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAIN_H
+#define __ARCH_ARM_MACH_OMAP2_POWERDOMAIN_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+#include <linux/atomic.h>
+
+#include <plat/cpu.h>
+
+/* Powerdomain basic power states */
+#define PWRDM_POWER_OFF 0x0
+#define PWRDM_POWER_RET 0x1
+#define PWRDM_POWER_INACTIVE 0x2
+#define PWRDM_POWER_ON 0x3
+
+#define PWRDM_MAX_PWRSTS 4
+
+/* Powerdomain allowable state bitfields */
+#define PWRSTS_ON (1 << PWRDM_POWER_ON)
+#define PWRSTS_OFF (1 << PWRDM_POWER_OFF)
+#define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \
+ (1 << PWRDM_POWER_ON))
+
+#define PWRSTS_OFF_RET ((1 << PWRDM_POWER_OFF) | \
+ (1 << PWRDM_POWER_RET))
+
+#define PWRSTS_RET_ON ((1 << PWRDM_POWER_RET) | \
+ (1 << PWRDM_POWER_ON))
+
+#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON))
+
+
+/* Powerdomain flags */
+#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */
+#define PWRDM_HAS_MPU_QUIRK (1 << 1) /* MPU pwr domain has MEM bank 0 bits
+ * in MEM bank 1 position. This is
+ * true for OMAP3430
+ */
+#define PWRDM_HAS_LOWPOWERSTATECHANGE (1 << 2) /*
+ * support to transition from a
+ * sleep state to a lower sleep
+ * state without waking up the
+ * powerdomain
+ */
+
+/*
+ * Number of memory banks that are power-controllable. On OMAP4430, the
+ * maximum is 5.
+ */
+#define PWRDM_MAX_MEM_BANKS 5
+
+/*
+ * Maximum number of clockdomains that can be associated with a powerdomain.
+ * CORE powerdomain on OMAP4 is the worst case
+ */
+#define PWRDM_MAX_CLKDMS 9
+
+/* XXX A completely arbitrary number. What is reasonable here? */
+#define PWRDM_TRANSITION_BAILOUT 100000
+
+struct clockdomain;
+struct powerdomain;
+
+/**
+ * struct powerdomain - OMAP powerdomain
+ * @name: Powerdomain name
+ * @omap_chip: represents the OMAP chip types containing this pwrdm
+ * @prcm_offs: the address offset from CM_BASE/PRM_BASE
+ * @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
+ * @pwrsts: Possible powerdomain power states
+ * @pwrsts_logic_ret: Possible logic power states when pwrdm in RETENTION
+ * @flags: Powerdomain flags
+ * @banks: Number of software-controllable memory banks in this powerdomain
+ * @pwrsts_mem_ret: Possible memory bank pwrstates when pwrdm in RETENTION
+ * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
+ * @pwrdm_clkdms: Clockdomains in this powerdomain
+ * @node: list_head linking all powerdomains
+ * @state:
+ * @state_counter:
+ * @timer:
+ * @state_timer:
+ *
+ * @prcm_partition possible values are defined in mach-omap2/prcm44xx.h.
+ */
+struct powerdomain {
+ const char *name;
+ const struct omap_chip_id omap_chip;
+ const s16 prcm_offs;
+ const u8 pwrsts;
+ const u8 pwrsts_logic_ret;
+ const u8 flags;
+ const u8 banks;
+ const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
+ const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
+ const u8 prcm_partition;
+ struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
+ struct list_head node;
+ int state;
+ unsigned state_counter[PWRDM_MAX_PWRSTS];
+ unsigned ret_logic_off_counter;
+ unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
+
+#ifdef CONFIG_PM_DEBUG
+ s64 timer;
+ s64 state_timer[PWRDM_MAX_PWRSTS];
+#endif
+};
+
+/**
+ * struct pwrdm_ops - Arch specfic function implementations
+ * @pwrdm_set_next_pwrst: Set the target power state for a pd
+ * @pwrdm_read_next_pwrst: Read the target power state set for a pd
+ * @pwrdm_read_pwrst: Read the current power state of a pd
+ * @pwrdm_read_prev_pwrst: Read the prev power state entered by the pd
+ * @pwrdm_set_logic_retst: Set the logic state in RET for a pd
+ * @pwrdm_set_mem_onst: Set the Memory state in ON for a pd
+ * @pwrdm_set_mem_retst: Set the Memory state in RET for a pd
+ * @pwrdm_read_logic_pwrst: Read the current logic state of a pd
+ * @pwrdm_read_prev_logic_pwrst: Read the previous logic state entered by a pd
+ * @pwrdm_read_logic_retst: Read the logic state in RET for a pd
+ * @pwrdm_read_mem_pwrst: Read the current memory state of a pd
+ * @pwrdm_read_prev_mem_pwrst: Read the previous memory state entered by a pd
+ * @pwrdm_read_mem_retst: Read the memory state in RET for a pd
+ * @pwrdm_clear_all_prev_pwrst: Clear all previous power states logged for a pd
+ * @pwrdm_enable_hdwr_sar: Enable Hardware Save-Restore feature for the pd
+ * @pwrdm_disable_hdwr_sar: Disable Hardware Save-Restore feature for a pd
+ * @pwrdm_set_lowpwrstchange: Enable pd transitions from a shallow to deep sleep
+ * @pwrdm_wait_transition: Wait for a pd state transition to complete
+ */
+struct pwrdm_ops {
+ int (*pwrdm_set_next_pwrst)(struct powerdomain *pwrdm, u8 pwrst);
+ int (*pwrdm_read_next_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_read_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_read_prev_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_set_logic_retst)(struct powerdomain *pwrdm, u8 pwrst);
+ int (*pwrdm_set_mem_onst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+ int (*pwrdm_set_mem_retst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+ int (*pwrdm_read_logic_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_read_prev_logic_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_read_logic_retst)(struct powerdomain *pwrdm);
+ int (*pwrdm_read_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
+ int (*pwrdm_read_prev_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
+ int (*pwrdm_read_mem_retst)(struct powerdomain *pwrdm, u8 bank);
+ int (*pwrdm_clear_all_prev_pwrst)(struct powerdomain *pwrdm);
+ int (*pwrdm_enable_hdwr_sar)(struct powerdomain *pwrdm);
+ int (*pwrdm_disable_hdwr_sar)(struct powerdomain *pwrdm);
+ int (*pwrdm_set_lowpwrstchange)(struct powerdomain *pwrdm);
+ int (*pwrdm_wait_transition)(struct powerdomain *pwrdm);
+};
+
+void pwrdm_fw_init(void);
+void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs);
+
+struct powerdomain *pwrdm_lookup(const char *name);
+
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user);
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user);
+
+int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
+int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
+int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
+ int (*fn)(struct powerdomain *pwrdm,
+ struct clockdomain *clkdm));
+
+int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
+
+int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
+int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
+
+int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
+int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+
+int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_logic_retst(struct powerdomain *pwrdm);
+int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
+
+int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
+int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
+bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
+
+int pwrdm_wait_transition(struct powerdomain *pwrdm);
+
+int pwrdm_state_switch(struct powerdomain *pwrdm);
+int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
+int pwrdm_pre_transition(void);
+int pwrdm_post_transition(void);
+int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
+
+extern void omap2xxx_powerdomains_init(void);
+extern void omap3xxx_powerdomains_init(void);
+extern void omap44xx_powerdomains_init(void);
+
+extern struct pwrdm_ops omap2_pwrdm_operations;
+extern struct pwrdm_ops omap3_pwrdm_operations;
+extern struct pwrdm_ops omap4_pwrdm_operations;
+
+/* Common Internal functions used across OMAP rev's */
+extern u32 omap2_pwrdm_get_mem_bank_onstate_mask(u8 bank);
+extern u32 omap2_pwrdm_get_mem_bank_retst_mask(u8 bank);
+extern u32 omap2_pwrdm_get_mem_bank_stst_mask(u8 bank);
+
+extern struct powerdomain wkup_omap2_pwrdm;
+extern struct powerdomain gfx_omap2_pwrdm;
+
+
+#endif
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index b5e9e4d..d523389 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -18,8 +18,8 @@
#include <plat/prcm.h>
+#include "powerdomain.h"
#include "prm-regbits-34xx.h"
-#include "powerdomains.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c
index 28bf5e3..a7880af 100644
--- a/arch/arm/mach-omap2/powerdomain44xx.c
+++ b/arch/arm/mach-omap2/powerdomain44xx.c
@@ -16,13 +16,12 @@
#include <linux/errno.h>
#include <linux/delay.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include <plat/prcm.h>
#include "prm2xxx_3xxx.h"
#include "prm44xx.h"
#include "prminst44xx.h"
#include "prm-regbits-44xx.h"
-#include "powerdomains.h"
static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
deleted file mode 100644
index f83adaf..0000000
--- a/arch/arm/mach-omap2/powerdomains.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * OMAP2+ powerdomain prototypes
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * Rajendra Nayak <rnayak@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS_H
-#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS_H
-
-#include <plat/powerdomain.h>
-
-extern struct pwrdm_ops omap2_pwrdm_operations;
-extern struct pwrdm_ops omap3_pwrdm_operations;
-extern struct pwrdm_ops omap4_pwrdm_operations;
-
-/* Common Internal functions used across OMAP rev's */
-extern u32 omap2_pwrdm_get_mem_bank_onstate_mask(u8 bank);
-extern u32 omap2_pwrdm_get_mem_bank_retst_mask(u8 bank);
-extern u32 omap2_pwrdm_get_mem_bank_stst_mask(u8 bank);
-
-extern struct powerdomain wkup_omap2_pwrdm;
-extern struct powerdomain gfx_omap2_pwrdm;
-
-#endif
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
index 14c6ef7..5b4dd97 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
@@ -45,13 +45,11 @@
* address offset is different between the C55 and C64 DSPs.
*/
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include "prcm-common.h"
#include "prm.h"
-#include "powerdomains.h"
-
/* OMAP2/3-common powerdomains */
/*
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h
index 45d684a..fa31166 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h
+++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h
@@ -14,7 +14,7 @@
#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAINS2XXX_3XXX_DATA_H
#define __ARCH_ARM_MACH_OMAP2_POWERDOMAINS2XXX_3XXX_DATA_H
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
extern struct powerdomain gfx_omap2_pwrdm;
extern struct powerdomain wkup_omap2_pwrdm;
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index e136895..9b1a335 100644
--- a/arch/arm/mach-omap2/powerdomains2xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -14,9 +14,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
-#include "powerdomains.h"
#include "prcm-common.h"
#include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 1830c63..e1bec56 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -14,9 +14,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
#include "powerdomains2xxx_3xxx_data.h"
-#include "powerdomains.h"
#include "prcm-common.h"
#include "prm2xxx_3xxx.h"
diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 823f477..5fdf485 100644
--- a/arch/arm/mach-omap2/powerdomains44xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -22,8 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <plat/powerdomain.h>
-#include "powerdomains.h"
+#include "powerdomain.h"
#include "prcm-common.h"
#include "prcm44xx.h"