[PATCH] m68knommu: add 5208 ColdFire support defines
Add support for the internal register map of the 5208 ColdFire fmaily.
Patch originally from Matt Wadell (from code originally written by
Mike Lavender).
Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/include/asm-m68knommu/m520xsim.h b/include/asm-m68knommu/m520xsim.h
new file mode 100644
index 0000000..6dc6286
--- /dev/null
+++ b/include/asm-m68knommu/m520xsim.h
@@ -0,0 +1,54 @@
+/****************************************************************************/
+
+/*
+ * m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
+ *
+ * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
+ */
+
+/****************************************************************************/
+#ifndef m520xsim_h
+#define m520xsim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ * Define the 5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_VECBASE 64
+#define MCFINT_UART0 26 /* Interrupt number for UART0 */
+#define MCFINT_UART1 27 /* Interrupt number for UART1 */
+#define MCFINT_UART2 28 /* Interrupt number for UART2 */
+#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
+#define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */
+
+
+#define MCF_GPIO_PAR_UART (0xA4036)
+#define MCF_GPIO_PAR_FECI2C (0xA4033)
+#define MCF_GPIO_PAR_FEC (0xA4038)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080)
+
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
+
+#define ICR_INTRCONF 0x05
+#define MCFPIT_IMR MCFINTC_IMRL
+#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1)
+
+/****************************************************************************/
+#endif /* m520xsim_h */