Blackfin arch: fix bugs and unify BFIN_KERNEL_CLOCK option
- remove duplicated code and headers
- add option allowing arbitrary SDRAM/DDR Timing parameters.
- mark automatically calculated timings as EXPERIMENTAL
- fix comment header block
Related to BUGs:
- kernel boot up fails with CONFIG_BFIN_KERNEL_CLOCK item on.
- kernel does not boot if re-program clocks
[ Mike Frysinger <vapier.adi@gmail.com>
- fix comment header
- mark do_sync static
- document the DMA shutdown
- simplify SIC_IWR handling
- fix ANOMALY_05000265 handling to work as intended ]
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index f8edfbe..5f09d93 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -473,6 +473,61 @@
bool "MT46V32M16_5B"
endchoice
+choice
+ prompt "DDR/SDRAM Timing"
+ depends on BFIN_KERNEL_CLOCK
+ default BFIN_KERNEL_CLOCK_MEMINIT_CALC
+ help
+ This option allows you to specify Blackfin SDRAM/DDR Timing parameters
+ The calculated SDRAM timing parameters may not be 100%
+ accurate - This option is therefore marked experimental.
+
+config BFIN_KERNEL_CLOCK_MEMINIT_CALC
+ bool "Calculate Timings (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+
+config BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+ bool "Provide accurate Timings based on target SCLK"
+ help
+ Please consult the Blackfin Hardware Reference Manuals as well
+ as the memory device datasheet.
+ http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram
+endchoice
+
+menu "Memory Init Control"
+ depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+
+config MEM_DDRCTL0
+ depends on BF54x
+ hex "DDRCTL0"
+ default 0x0
+
+config MEM_DDRCTL1
+ depends on BF54x
+ hex "DDRCTL1"
+ default 0x0
+
+config MEM_DDRCTL2
+ depends on BF54x
+ hex "DDRCTL2"
+ default 0x0
+
+config MEM_EBIU_DDRQUE
+ depends on BF54x
+ hex "DDRQUE"
+ default 0x0
+
+config MEM_SDRRC
+ depends on !BF54x
+ hex "SDRRC"
+ default 0x0
+
+config MEM_SDGCTL
+ depends on !BF54x
+ hex "SDGCTL"
+ default 0x0
+endmenu
+
config MAX_MEM_SIZE
int "Max SDRAM Memory Size in MBytes"
depends on !MPU
@@ -1104,13 +1159,13 @@
config CPU_VOLTAGE
bool "CPU Voltage scaling"
- depends on EXPERIMENTAL
+ depends on EXPERIMENTAL
depends on CPU_FREQ
default n
help
Say Y here if you want CPU voltage scaling according to the CPU frequency.
This option violates the PLL BYPASS recommendation in the Blackfin Processor
- manuals. There is a theoretical risk that during VDDINT transitions
+ manuals. There is a theoretical risk that during VDDINT transitions
the PLL may unlock.
endmenu
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 2faad12..558241e 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -91,7 +91,7 @@
CHECKFLAGS_SILICON = $(shell echo "" | $(CPP) $(KBUILD_CFLAGS) -dD - 2>/dev/null | awk '$$2 == "__SILICON_REVISION__" { print $$3 }')
CHECKFLAGS += -D__SILICON_REVISION__=$(CHECKFLAGS_SILICON) -Dl1_text=__used__
-head-y := arch/$(ARCH)/mach-$(MACHINE)/head.o arch/$(ARCH)/kernel/init_task.o
+head-y := arch/$(ARCH)/kernel/init_task.o
core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/
diff --git a/arch/blackfin/mach-bf537/include/mach/mem_init.h b/arch/blackfin/include/asm/mem_init.h
similarity index 67%
rename from arch/blackfin/mach-bf537/include/mach/mem_init.h
rename to arch/blackfin/include/asm/mem_init.h
index f67698f..3cbc0f8 100644
--- a/arch/blackfin/mach-bf537/include/mach/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -1,35 +1,19 @@
/*
- * File: include/asm-blackfin/mach-bf537/mem_init.h
- * Based on:
- * Author:
+ * arch/blackfin/include/asm/mem_init.h - reprogram clocks / memory
*
- * Created:
- * Description:
+ * Copyright 2004-2008 Analog Devices Inc.
*
- * Rev:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75)
+#if defined(EBIU_SDGCTL)
+#if defined(CONFIG_MEM_MT48LC16M16A2TG_75) || \
+ defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
+ defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
+ defined(CONFIG_MEM_GENERIC_BOARD) || \
+ defined(CONFIG_MEM_MT48LC32M8A2_75) || \
+ defined(CONFIG_MEM_MT48LC8M32B2B5_7) || \
+ defined(CONFIG_MEM_MT48LC32M16A2TG_75)
#if (CONFIG_SCLK_HZ > 119402985)
#define SDRAM_tRP TRP_2
#define SDRAM_tRP_num 2
@@ -104,46 +88,113 @@
#endif
#endif
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC16M8A2TG_75)
+#if defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
+ defined(CONFIG_MEM_MT48LC8M32B2B5_7)
/*SDRAM INFORMATION: */
#define SDRAM_Tref 64 /* Refresh period in milliseconds */
#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */
#define SDRAM_CL CL_3
#endif
-#if (CONFIG_MEM_MT48LC32M8A2_75)
+#if defined(CONFIG_MEM_MT48LC32M8A2_75) || \
+ defined(CONFIG_MEM_MT48LC64M4A2FB_7E) || \
+ defined(CONFIG_MEM_GENERIC_BOARD) || \
+ defined(CONFIG_MEM_MT48LC32M16A2TG_75) || \
+ defined(CONFIG_MEM_MT48LC16M16A2TG_75)
/*SDRAM INFORMATION: */
#define SDRAM_Tref 64 /* Refresh period in milliseconds */
#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
#define SDRAM_CL CL_3
#endif
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-#if (CONFIG_MEM_GENERIC_BOARD)
- /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
+#ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC
/* Equation from section 17 (p17-46) of BF533 HRM */
#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
/* Enable SCLK Out */
-#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+#define mem_SDGCTL (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+#else
+#define mem_SDRRC CONFIG_MEM_SDRRC
+#define mem_SDGCTL CONFIG_MEM_SDGCTL
+#endif
+#endif
+
+
+#if defined(EBIU_DDRCTL0)
+#define MIN_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1)
+#define MAX_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000)
+#define DDR_CLK_HZ(x) (1000*1000*1000/x)
+
+#if defined(CONFIG_MEM_MT46V32M16_6T)
+#define DDR_SIZE DEVSZ_512
+#define DDR_WIDTH DEVWD_16
+#define DDR_MAX_tCK 13
+
+#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(60))
+#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(42))
+#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15))
+#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(72))
+#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800))
+
+#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15))
+#define DDR_tWTR DDR_TWTR(1)
+#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(12))
+#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15))
+#endif
+
+#if defined(CONFIG_MEM_MT46V32M16_5B)
+#define DDR_SIZE DEVSZ_512
+#define DDR_WIDTH DEVWD_16
+#define DDR_MAX_tCK 13
+
+#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(55))
+#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(40))
+#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15))
+#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(70))
+#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800))
+
+#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15))
+#define DDR_tWTR DDR_TWTR(2)
+#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(10))
+#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15))
+#endif
+
+#if defined(CONFIG_MEM_GENERIC_BOARD)
+#define DDR_SIZE DEVSZ_512
+#define DDR_WIDTH DEVWD_16
+#define DDR_MAX_tCK 13
+
+#define DDR_tRCD DDR_TRCD(3)
+#define DDR_tWTR DDR_TWTR(2)
+#define DDR_tWR DDR_TWR(2)
+#define DDR_tMRD DDR_TMRD(2)
+#define DDR_tRP DDR_TRP(3)
+#define DDR_tRAS DDR_TRAS(7)
+#define DDR_tRC DDR_TRC(10)
+#define DDR_tRFC DDR_TRFC(12)
+#define DDR_tREFI DDR_TREFI(1288)
+#endif
+
+#if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK))
+# error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)."
+#elif(CONFIG_SCLK_HZ <= 133333333)
+# define DDR_CL CL_2
+#else
+# error "CONFIG_SCLK_HZ is too large (>133333333 Hz)."
+#endif
+
+#ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC
+#define mem_DDRCTL0 (DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI)
+#define mem_DDRCTL1 (DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \
+ | DDR_tMRD | DDR_tWR | DDR_tRCD)
+#define mem_DDRCTL2 DDR_CL
+#else
+#define mem_DDRCTL0 CONFIG_MEM_DDRCTL0
+#define mem_DDRCTL1 CONFIG_MEM_DDRCTL1
+#define mem_DDRCTL2 CONFIG_MEM_DDRCTL2
+#endif
+#endif
#if defined CONFIG_CLKIN_HALF
#define CLKIN_HALF 1
@@ -158,6 +209,13 @@
#endif
/***************************************Currently Not Being Used *********************************/
+
+#if defined(CONFIG_FLASH_SPEED_BWAT) && \
+defined(CONFIG_FLASH_SPEED_BRAT) && \
+defined(CONFIG_FLASH_SPEED_BHT) && \
+defined(CONFIG_FLASH_SPEED_BST) && \
+defined(CONFIG_FLASH_SPEED_BTT)
+
#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
@@ -301,3 +359,4 @@
#define flash_EBIU_AMBCTL0 \
(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
+#endif
diff --git a/arch/blackfin/mach-bf518/Makefile b/arch/blackfin/mach-bf518/Makefile
index 9d5e16d..168a193 100644
--- a/arch/blackfin/mach-bf518/Makefile
+++ b/arch/blackfin/mach-bf518/Makefile
@@ -2,6 +2,4 @@
# arch/blackfin/mach-bf518/Makefile
#
-extra-y := head.o
-
obj-y := ints-priority.o dma.o
diff --git a/arch/blackfin/mach-bf518/head.S b/arch/blackfin/mach-bf518/head.S
deleted file mode 100644
index 771bf7e..0000000
--- a/arch/blackfin/mach-bf518/head.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf518/head.S
- * Based on: arch/blackfin/mach-bf527/head.S
- * Author: Bryan Wu <cooloney@kernel.org>
- *
- * Created: 2008
- * Description: Startup code for Blackfin BF51x
- *
- * Modified:
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/blackfin.h>
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.section .l1.text
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-ENTRY(_start_dma_code)
-
- /* Enable PHY CLK buffer output */
- p0.h = hi(VR_CTL);
- p0.l = lo(VR_CTL);
- r0.l = w[p0];
- bitset(r0, 14);
- w[p0] = r0.l;
- ssync;
-
- p0.h = hi(SIC_IWR0);
- p0.l = lo(SIC_IWR0);
- r0.l = 0x1;
- r0.h = 0x0;
- [p0] = r0;
- ssync;
-
- /*
- * Set PLL_CTL
- * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
- * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
- * - [7] = output delay (add 200ps of delay to mem signals)
- * - [6] = input delay (add 200ps of input delay to mem signals)
- * - [5] = PDWN : 1=All Clocks off
- * - [3] = STOPCK : 1=Core Clock off
- * - [1] = PLL_OFF : 1=Disable Power to PLL
- * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
- * all other bits set to zero
- */
-
- p0.h = hi(PLL_LOCKCNT);
- p0.l = lo(PLL_LOCKCNT);
- r0 = 0x300(Z);
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITSET (R0, 24);
- [P2] = R0;
- ssync;
-
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
- r0 = r1 | r0;
- r1 = PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-#ifdef ANOMALY_05000265
- BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
-#endif
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-.Lcheck_again:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump .Lcheck_again;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- p0.l = lo(EBIU_SDRRC);
- p0.h = hi(EBIU_SDRRC);
- r0 = mem_SDRRC;
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITCLR (R0, 24);
- p0.h = hi(EBIU_SDSTAT);
- p0.l = lo(EBIU_SDSTAT);
- r2.l = w[p0];
- cc = bittst(r2,3);
- if !cc jump .Lskip;
- NOP;
- BITSET (R0, 23);
-.Lskip:
- [P2] = R0;
- SSYNC;
-
- R0.L = lo(mem_SDGCTL);
- R0.H = hi(mem_SDGCTL);
- R1 = [p2];
- R1 = R1 | R0;
- [P2] = R1;
- SSYNC;
-
- RTS;
-ENDPROC(_start_dma_code)
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf518/include/mach/mem_init.h b/arch/blackfin/mach-bf518/include/mach/mem_init.h
deleted file mode 100644
index 2f4f409..0000000
--- a/arch/blackfin/mach-bf518/include/mach/mem_init.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * File: include/asm-blackfin/mach-bf518/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_7
-#define SDRAM_tRAS_num 7
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_6
-#define SDRAM_tRAS_num 6
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_5
-#define SDRAM_tRAS_num 5
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 4
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_2
-#define SDRAM_tRAS_num 2
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_1
-#define SDRAM_tRAS_num 1
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC16M8A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M8A2_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
- /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF 1
-#else
-#define CLKIN_HALF 0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS 1
-#else
-#define PLL_BYPASS 0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0 \
- (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
- flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf527/Makefile b/arch/blackfin/mach-bf527/Makefile
index 4eddb58..4a6cdaf 100644
--- a/arch/blackfin/mach-bf527/Makefile
+++ b/arch/blackfin/mach-bf527/Makefile
@@ -2,6 +2,4 @@
# arch/blackfin/mach-bf527/Makefile
#
-extra-y := head.o
-
obj-y := ints-priority.o dma.o
diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S
deleted file mode 100644
index 0eb1da8..0000000
--- a/arch/blackfin/mach-bf527/head.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf527/head.S
- * Based on: arch/blackfin/mach-bf533/head.S
- * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
- *
- * Created: 1998
- * Description: Startup code for Blackfin BF537
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/blackfin.h>
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/clocks.h>
-#include <mach/mem_init.h>
-#endif
-
-.section .l1.text
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-ENTRY(_start_dma_code)
-
- /* Enable PHY CLK buffer output */
- p0.h = hi(VR_CTL);
- p0.l = lo(VR_CTL);
- r0.l = w[p0];
- bitset(r0, 14);
- w[p0] = r0.l;
- ssync;
-
- p0.h = hi(SIC_IWR0);
- p0.l = lo(SIC_IWR0);
- r0.l = 0x1;
- r0.h = 0x0;
- [p0] = r0;
- SSYNC;
-
- /*
- * Set PLL_CTL
- * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
- * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
- * - [7] = output delay (add 200ps of delay to mem signals)
- * - [6] = input delay (add 200ps of input delay to mem signals)
- * - [5] = PDWN : 1=All Clocks off
- * - [3] = STOPCK : 1=Core Clock off
- * - [1] = PLL_OFF : 1=Disable Power to PLL
- * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
- * all other bits set to zero
- */
-
- p0.h = hi(PLL_LOCKCNT);
- p0.l = lo(PLL_LOCKCNT);
- r0 = 0x300(Z);
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITSET (R0, 24);
- [P2] = R0;
- SSYNC;
-
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
- r0 = r1 | r0;
- r1 = PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-#ifdef ANOMALY_05000265
- BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
-#endif
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-.Lcheck_again:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump .Lcheck_again;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- p0.l = lo(EBIU_SDRRC);
- p0.h = hi(EBIU_SDRRC);
- r0 = mem_SDRRC;
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITCLR (R0, 24);
- p0.h = hi(EBIU_SDSTAT);
- p0.l = lo(EBIU_SDSTAT);
- r2.l = w[p0];
- cc = bittst(r2,3);
- if !cc jump .Lskip;
- NOP;
- BITSET (R0, 23);
-.Lskip:
- [P2] = R0;
- SSYNC;
-
- R0.L = lo(mem_SDGCTL);
- R0.H = hi(mem_SDGCTL);
- R1 = [p2];
- R1 = R1 | R0;
- [P2] = R1;
- SSYNC;
-
- RTS;
-ENDPROC(_start_dma_code)
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_init.h b/arch/blackfin/mach-bf527/include/mach/mem_init.h
deleted file mode 100644
index cbe03f4..0000000
--- a/arch/blackfin/mach-bf527/include/mach/mem_init.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * File: include/asm-blackfin/mach-bf527/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_7
-#define SDRAM_tRAS_num 7
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_6
-#define SDRAM_tRAS_num 6
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_5
-#define SDRAM_tRAS_num 5
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 4
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_2
-#define SDRAM_tRAS_num 2
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_1
-#define SDRAM_tRAS_num 1
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC16M8A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M8A2_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
- /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF 1
-#else
-#define CLKIN_HALF 0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS 1
-#else
-#define PLL_BYPASS 0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0 \
- (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
- flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf533/Makefile b/arch/blackfin/mach-bf533/Makefile
index aa9f264..874840f 100644
--- a/arch/blackfin/mach-bf533/Makefile
+++ b/arch/blackfin/mach-bf533/Makefile
@@ -2,6 +2,4 @@
# arch/blackfin/mach-bf533/Makefile
#
-extra-y := head.o
-
obj-y := ints-priority.o dma.o
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
deleted file mode 100644
index 9fc95aa..0000000
--- a/arch/blackfin/mach-bf533/head.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf533/head.S
- * Based on:
- * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
- *
- * Created: 1998
- * Description: bf533 startup file
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/blackfin.h>
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/clocks.h>
-#include <mach/mem_init.h>
-#endif
-
-.section .l1.text
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-ENTRY(_start_dma_code)
- p0.h = hi(SIC_IWR);
- p0.l = lo(SIC_IWR);
- r0.l = 0x1;
- r0.h = 0x0;
- [p0] = r0;
- SSYNC;
-
- /*
- * Set PLL_CTL
- * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
- * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
- * - [7] = output delay (add 200ps of delay to mem signals)
- * - [6] = input delay (add 200ps of input delay to mem signals)
- * - [5] = PDWN : 1=All Clocks off
- * - [3] = STOPCK : 1=Core Clock off
- * - [1] = PLL_OFF : 1=Disable Power to PLL
- * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
- * all other bits set to zero
- */
-
- p0.h = hi(PLL_LOCKCNT);
- p0.l = lo(PLL_LOCKCNT);
- r0 = 0x300(Z);
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITSET (R0, 24);
- [P2] = R0;
- SSYNC;
-
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
- r0 = r1 | r0;
- r1 = PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-#ifdef ANOMALY_05000265
- BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
-#endif
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-.Lcheck_again:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump .Lcheck_again;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- p0.l = lo(EBIU_SDRRC);
- p0.h = hi(EBIU_SDRRC);
- r0 = mem_SDRRC;
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITCLR (R0, 24);
- p0.h = hi(EBIU_SDSTAT);
- p0.l = lo(EBIU_SDSTAT);
- r2.l = w[p0];
- cc = bittst(r2,3);
- if !cc jump .Lskip;
- NOP;
- BITSET (R0, 23);
-.Lskip:
- [P2] = R0;
- SSYNC;
-
- R0.L = lo(mem_SDGCTL);
- R0.H = hi(mem_SDGCTL);
- R1 = [p2];
- R1 = R1 | R0;
- [P2] = R1;
- SSYNC;
-
- RTS;
-ENDPROC(_start_dma_code)
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf533/include/mach/mem_init.h b/arch/blackfin/mach-bf533/include/mach/mem_init.h
deleted file mode 100644
index ed2034b..0000000
--- a/arch/blackfin/mach-bf533/include/mach/mem_init.h
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * File: include/asm-blackfin/mach-bf533/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || \
- CONFIG_MEM_MT48LC32M16A2TG_75 || CONFIG_MEM_GENERIC_BOARD)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_7
-#define SDRAM_tRAS_num 7
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_6
-#define SDRAM_tRAS_num 6
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_5
-#define SDRAM_tRAS_num 5
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 4
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_2
-#define SDRAM_tRAS_num 2
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_1
-#define SDRAM_tRAS_num 1
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
- /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF 1
-#else
-#define CLKIN_HALF 0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS 1
-#else
-#define PLL_BYPASS 0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0 \
- (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
- flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile
index 68e5478..56994b6 100644
--- a/arch/blackfin/mach-bf537/Makefile
+++ b/arch/blackfin/mach-bf537/Makefile
@@ -2,6 +2,4 @@
# arch/blackfin/mach-bf537/Makefile
#
-extra-y := head.o
-
obj-y := ints-priority.o dma.o
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
deleted file mode 100644
index f5c94bf..0000000
--- a/arch/blackfin/mach-bf537/head.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf537/head.S
- * Based on: arch/blackfin/mach-bf533/head.S
- * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
- *
- * Created: 1998
- * Description: Startup code for Blackfin BF537
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/blackfin.h>
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/clocks.h>
-#include <mach/mem_init.h>
-#endif
-
-.section .l1.text
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-ENTRY(_start_dma_code)
-
- /* Enable PHY CLK buffer output */
- p0.h = hi(VR_CTL);
- p0.l = lo(VR_CTL);
- r0.l = w[p0];
- bitset(r0, 14);
- w[p0] = r0.l;
- ssync;
-
- p0.h = hi(SIC_IWR);
- p0.l = lo(SIC_IWR);
- r0.l = 0x1;
- r0.h = 0x0;
- [p0] = r0;
- SSYNC;
-
- /*
- * Set PLL_CTL
- * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
- * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
- * - [7] = output delay (add 200ps of delay to mem signals)
- * - [6] = input delay (add 200ps of input delay to mem signals)
- * - [5] = PDWN : 1=All Clocks off
- * - [3] = STOPCK : 1=Core Clock off
- * - [1] = PLL_OFF : 1=Disable Power to PLL
- * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
- * all other bits set to zero
- */
-
- p0.h = hi(PLL_LOCKCNT);
- p0.l = lo(PLL_LOCKCNT);
- r0 = 0x300(Z);
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITSET (R0, 24);
- [P2] = R0;
- SSYNC;
-
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
- r0 = r1 | r0;
- r1 = PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-#ifdef ANOMALY_05000265
- BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
-#endif
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-.Lcheck_again:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump .Lcheck_again;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- p0.l = lo(EBIU_SDRRC);
- p0.h = hi(EBIU_SDRRC);
- r0 = mem_SDRRC;
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITCLR (R0, 24);
- p0.h = hi(EBIU_SDSTAT);
- p0.l = lo(EBIU_SDSTAT);
- r2.l = w[p0];
- cc = bittst(r2,3);
- if !cc jump .Lskip;
- NOP;
- BITSET (R0, 23);
-.Lskip:
- [P2] = R0;
- SSYNC;
-
- R0.L = lo(mem_SDGCTL);
- R0.H = hi(mem_SDGCTL);
- R1 = [p2];
- R1 = R1 | R0;
- [P2] = R1;
- SSYNC;
-
- RTS;
-ENDPROC(_start_dma_code)
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf538/Makefile b/arch/blackfin/mach-bf538/Makefile
index 1f093c4..8cd2719 100644
--- a/arch/blackfin/mach-bf538/Makefile
+++ b/arch/blackfin/mach-bf538/Makefile
@@ -2,6 +2,4 @@
# arch/blackfin/mach-bf538/Makefile
#
-extra-y := head.o
-
obj-y := ints-priority.o dma.o
diff --git a/arch/blackfin/mach-bf538/head.S b/arch/blackfin/mach-bf538/head.S
deleted file mode 100644
index 39013ec..0000000
--- a/arch/blackfin/mach-bf538/head.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf538/head.S
- * Based on:
- * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
- *
- * Created: 1998
- * Description: bf533 startup file
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/blackfin.h>
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.section .l1.text
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-ENTRY(_start_dma_code)
- p0.h = hi(SIC_IWR0);
- p0.l = lo(SIC_IWR0);
- r0.l = 0x1;
- r0.h = 0x0;
- [p0] = r0;
- SSYNC;
-
- /*
- * Set PLL_CTL
- * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
- * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
- * - [7] = output delay (add 200ps of delay to mem signals)
- * - [6] = input delay (add 200ps of input delay to mem signals)
- * - [5] = PDWN : 1=All Clocks off
- * - [3] = STOPCK : 1=Core Clock off
- * - [1] = PLL_OFF : 1=Disable Power to PLL
- * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
- * all other bits set to zero
- */
-
- p0.h = hi(PLL_LOCKCNT);
- p0.l = lo(PLL_LOCKCNT);
- r0 = 0x300(Z);
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITSET (R0, 24);
- [P2] = R0;
- SSYNC;
-
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
- r0 = r1 | r0;
- r1 = PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-#ifdef ANOMALY_05000265
- BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
-#endif
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-.Lcheck_again:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump .Lcheck_again;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- p0.l = lo(EBIU_SDRRC);
- p0.h = hi(EBIU_SDRRC);
- r0 = mem_SDRRC;
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITCLR (R0, 24);
- p0.h = hi(EBIU_SDSTAT);
- p0.l = lo(EBIU_SDSTAT);
- r2.l = w[p0];
- cc = bittst(r2,3);
- if !cc jump .Lskip;
- NOP;
- BITSET (R0, 23);
-.Lskip:
- [P2] = R0;
- SSYNC;
-
- R0.L = lo(mem_SDGCTL);
- R0.H = hi(mem_SDGCTL);
- R1 = [p2];
- R1 = R1 | R0;
- [P2] = R1;
- SSYNC;
-
- RTS;
-ENDPROC(_start_dma_code)
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf538/include/mach/mem_init.h b/arch/blackfin/mach-bf538/include/mach/mem_init.h
deleted file mode 100644
index d3961ba..0000000
--- a/arch/blackfin/mach-bf538/include/mach/mem_init.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * File: include/asm-blackfin/mach-bf538/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_7
-#define SDRAM_tRAS_num 7
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_6
-#define SDRAM_tRAS_num 6
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_5
-#define SDRAM_tRAS_num 5
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 4
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_2
-#define SDRAM_tRAS_num 2
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_1
-#define SDRAM_tRAS_num 1
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC16M8A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M8A2_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
- /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC ((((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num))
-
-/* Enable SCLK Out */
-#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF 1
-#else
-#define CLKIN_HALF 0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS 1
-#else
-#define PLL_BYPASS 0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT (((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1)
-#define flash_EBIU_AMBCTL_RAT (((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1)
-#define flash_EBIU_AMBCTL_HT (((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)))
-#define flash_EBIU_AMBCTL_ST (((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1)
-#define flash_EBIU_AMBCTL_TT (((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1)
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0 \
- (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
- flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf548/Makefile b/arch/blackfin/mach-bf548/Makefile
index 68e5478..56994b6 100644
--- a/arch/blackfin/mach-bf548/Makefile
+++ b/arch/blackfin/mach-bf548/Makefile
@@ -2,6 +2,4 @@
# arch/blackfin/mach-bf537/Makefile
#
-extra-y := head.o
-
obj-y := ints-priority.o dma.o
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
deleted file mode 100644
index 93b361d..0000000
--- a/arch/blackfin/mach-bf548/head.S
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf548/head.S
- * Based on: arch/blackfin/mach-bf537/head.S
- * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
- *
- * Created: 1998
- * Description: Startup code for Blackfin BF548
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/blackfin.h>
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/clocks.h>
-#include <mach/mem_init.h>
-#endif
-
-.section .l1.text
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-ENTRY(_start_dma_code)
-
- /* Enable PHY CLK buffer output */
- p0.h = hi(VR_CTL);
- p0.l = lo(VR_CTL);
- r0.l = w[p0];
- bitset(r0, 14);
- w[p0] = r0.l;
- ssync;
-
- p0.h = hi(SIC_IWR0);
- p0.l = lo(SIC_IWR0);
- r0.l = 0x1;
- r0.h = 0x0;
- [p0] = r0;
- SSYNC;
-
- /*
- * Set PLL_CTL
- * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
- * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
- * - [7] = output delay (add 200ps of delay to mem signals)
- * - [6] = input delay (add 200ps of input delay to mem signals)
- * - [5] = PDWN : 1=All Clocks off
- * - [3] = STOPCK : 1=Core Clock off
- * - [1] = PLL_OFF : 1=Disable Power to PLL
- * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
- * all other bits set to zero
- */
-
- p0.h = hi(PLL_LOCKCNT);
- p0.l = lo(PLL_LOCKCNT);
- r0 = 0x300(Z);
- w[p0] = r0.l;
- ssync;
-
- /* enable self refresh via SRREQ */
- P2.H = hi(EBIU_RSTCTL);
- P2.L = lo(EBIU_RSTCTL);
- R0 = [P2];
- BITSET (R0, 3);
- [P2] = R0;
- SSYNC;
-
- /* wait for SRACK bit to be set */
-.LSRR_MODE:
- R0 = [P2];
- CC = BITTST(R0, 4);
- if !CC JUMP .LSRR_MODE;
-
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
- r0 = r1 | r0;
- r1 = PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-#ifdef ANOMALY_05000265
- BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
-#endif
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-.Lcheck_again:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump .Lcheck_again;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- /* disable self refresh by clearing SRREQ */
- P2.H = hi(EBIU_RSTCTL);
- P2.L = lo(EBIU_RSTCTL);
- R0 = [P2];
- CC = BITTST(R0, 0);
- if CC jump .Lskipddrrst;
- BITSET (R0, 0);
-.Lskipddrrst:
- BITCLR (R0, 3);
- [P2] = R0;
- SSYNC;
-
- p0.l = lo(EBIU_DDRCTL0);
- p0.h = hi(EBIU_DDRCTL0);
- r0.l = lo(mem_DDRCTL0);
- r0.h = hi(mem_DDRCTL0);
- [p0] = r0;
- ssync;
-
- p0.l = lo(EBIU_DDRCTL1);
- p0.h = hi(EBIU_DDRCTL1);
- r0.l = lo(mem_DDRCTL1);
- r0.h = hi(mem_DDRCTL1);
- [p0] = r0;
- ssync;
-
- p0.l = lo(EBIU_DDRCTL2);
- p0.h = hi(EBIU_DDRCTL2);
- r0.l = lo(mem_DDRCTL2);
- r0.h = hi(mem_DDRCTL2);
- [p0] = r0;
- ssync;
-
- RTS;
-ENDPROC(_start_dma_code)
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf548/include/mach/mem_init.h b/arch/blackfin/mach-bf548/include/mach/mem_init.h
deleted file mode 100644
index ab0b863..0000000
--- a/arch/blackfin/mach-bf548/include/mach/mem_init.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * File: include/asm-blackfin/mach-bf548/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#define MIN_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000 + 1)
-#define MAX_DDR_SCLK(x) (x*(CONFIG_SCLK_HZ/1000/1000)/1000)
-#define DDR_CLK_HZ(x) (1000*1000*1000/x)
-
-#if (CONFIG_MEM_MT46V32M16_6T)
-#define DDR_SIZE DEVSZ_512
-#define DDR_WIDTH DEVWD_16
-#define DDR_MAX_tCK 13
-
-#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(60))
-#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(42))
-#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15))
-#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(72))
-#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800))
-
-#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15))
-#define DDR_tWTR DDR_TWTR(1)
-#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(12))
-#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15))
-#endif
-
-#if (CONFIG_MEM_MT46V32M16_5B)
-#define DDR_SIZE DEVSZ_512
-#define DDR_WIDTH DEVWD_16
-#define DDR_MAX_tCK 13
-
-#define DDR_tRC DDR_TRC(MIN_DDR_SCLK(55))
-#define DDR_tRAS DDR_TRAS(MIN_DDR_SCLK(40))
-#define DDR_tRP DDR_TRP(MIN_DDR_SCLK(15))
-#define DDR_tRFC DDR_TRFC(MIN_DDR_SCLK(70))
-#define DDR_tREFI DDR_TREFI(MAX_DDR_SCLK(7800))
-
-#define DDR_tRCD DDR_TRCD(MIN_DDR_SCLK(15))
-#define DDR_tWTR DDR_TWTR(2)
-#define DDR_tMRD DDR_TMRD(MIN_DDR_SCLK(10))
-#define DDR_tWR DDR_TWR(MIN_DDR_SCLK(15))
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
-#define DDR_SIZE DEVSZ_512
-#define DDR_WIDTH DEVWD_16
-#define DDR_MAX_tCK 13
-
-#define DDR_tRCD DDR_TRCD(3)
-#define DDR_tWTR DDR_TWTR(2)
-#define DDR_tWR DDR_TWR(2)
-#define DDR_tMRD DDR_TMRD(2)
-#define DDR_tRP DDR_TRP(3)
-#define DDR_tRAS DDR_TRAS(7)
-#define DDR_tRC DDR_TRC(10)
-#define DDR_tRFC DDR_TRFC(12)
-#define DDR_tREFI DDR_TREFI(1288)
-#endif
-
-#if (CONFIG_SCLK_HZ < DDR_CLK_HZ(DDR_MAX_tCK))
-# error "CONFIG_SCLK_HZ is too small (<DDR_CLK_HZ(DDR_MAX_tCK) Hz)."
-#elif(CONFIG_SCLK_HZ <= 133333333)
-# define DDR_CL CL_2
-#else
-# error "CONFIG_SCLK_HZ is too large (>133333333 Hz)."
-#endif
-
-
-#define mem_DDRCTL0 (DDR_tRP | DDR_tRAS | DDR_tRC | DDR_tRFC | DDR_tREFI)
-#define mem_DDRCTL1 (DDR_DATWIDTH | EXTBANK_1 | DDR_SIZE | DDR_WIDTH | DDR_tWTR \
- | DDR_tMRD | DDR_tWR | DDR_tRCD)
-#define mem_DDRCTL2 DDR_CL
-
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF 1
-#else
-#define CLKIN_HALF 0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS 1
-#else
-#define PLL_BYPASS 0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0 \
- (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
- flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf561/Makefile b/arch/blackfin/mach-bf561/Makefile
index c37f00c..59e18af 100644
--- a/arch/blackfin/mach-bf561/Makefile
+++ b/arch/blackfin/mach-bf561/Makefile
@@ -2,8 +2,6 @@
# arch/blackfin/mach-bf561/Makefile
#
-extra-y := head.o
-
obj-y := ints-priority.o dma.o
obj-$(CONFIG_BF561_COREB) += coreb.o
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
deleted file mode 100644
index 31a777a..0000000
--- a/arch/blackfin/mach-bf561/head.S
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * File: arch/blackfin/mach-bf561/head.S
- * Based on: arch/blackfin/mach-bf533/head.S
- * Author:
- *
- * Created:
- * Description: BF561 startup file
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/blackfin.h>
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/clocks.h>
-#include <mach/mem_init.h>
-#endif
-
-.section .l1.text
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-ENTRY(_start_dma_code)
- p0.h = hi(SICA_IWR0);
- p0.l = lo(SICA_IWR0);
- r0.l = 0x1;
- [p0] = r0;
- SSYNC;
-
- /*
- * Set PLL_CTL
- * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
- * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
- * - [7] = output delay (add 200ps of delay to mem signals)
- * - [6] = input delay (add 200ps of input delay to mem signals)
- * - [5] = PDWN : 1=All Clocks off
- * - [3] = STOPCK : 1=Core Clock off
- * - [1] = PLL_OFF : 1=Disable Power to PLL
- * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
- * all other bits set to zero
- */
-
- p0.h = hi(PLL_LOCKCNT);
- p0.l = lo(PLL_LOCKCNT);
- r0 = 0x300(Z);
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITSET (R0, 24);
- [P2] = R0;
- SSYNC;
-
- r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
- r0 = r0 << 9; /* Shift it over, */
- r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
- r0 = r1 | r0;
- r1 = PLL_BYPASS; /* Bypass the PLL? */
- r1 = r1 << 8; /* Shift it over */
- r0 = r1 | r0; /* add them all together */
-#ifdef ANOMALY_05000265
- BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
-#endif
-
- p0.h = hi(PLL_CTL);
- p0.l = lo(PLL_CTL); /* Load the address */
- cli r2; /* Disable interrupts */
- ssync;
- w[p0] = r0.l; /* Set the value */
- idle; /* Wait for the PLL to stablize */
- sti r2; /* Enable interrupts */
-
-.Lcheck_again:
- p0.h = hi(PLL_STAT);
- p0.l = lo(PLL_STAT);
- R0 = W[P0](Z);
- CC = BITTST(R0,5);
- if ! CC jump .Lcheck_again;
-
- /* Configure SCLK & CCLK Dividers */
- r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
- p0.h = hi(PLL_DIV);
- p0.l = lo(PLL_DIV);
- w[p0] = r0.l;
- ssync;
-
- p0.l = lo(EBIU_SDRRC);
- p0.h = hi(EBIU_SDRRC);
- r0 = mem_SDRRC;
- w[p0] = r0.l;
- ssync;
-
- P2.H = hi(EBIU_SDGCTL);
- P2.L = lo(EBIU_SDGCTL);
- R0 = [P2];
- BITCLR (R0, 24);
- p0.h = hi(EBIU_SDSTAT);
- p0.l = lo(EBIU_SDSTAT);
- r2.l = w[p0];
- cc = bittst(r2,3);
- if !cc jump .Lskip;
- NOP;
- BITSET (R0, 23);
-.Lskip:
- [P2] = R0;
- SSYNC;
-
- R0.L = lo(mem_SDGCTL);
- R0.H = hi(mem_SDGCTL);
- R1 = [p2];
- R1 = R1 | R0;
- [P2] = R1;
- SSYNC;
-
- RTS;
-ENDPROC(_start_dma_code)
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_init.h b/arch/blackfin/mach-bf561/include/mach/mem_init.h
deleted file mode 100644
index e163260..0000000
--- a/arch/blackfin/mach-bf561/include/mach/mem_init.h
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * File: include/asm-blackfin/mach-bf561/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC8M32B2B5_7)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_7
-#define SDRAM_tRAS_num 7
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_6
-#define SDRAM_tRAS_num 6
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_5
-#define SDRAM_tRAS_num 5
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 4
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP TRP_2
-#define SDRAM_tRP_num 2
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_2
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_3
-#define SDRAM_tRAS_num 3
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_2
-#define SDRAM_tRAS_num 2
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP TRP_1
-#define SDRAM_tRP_num 1
-#define SDRAM_tRAS TRAS_1
-#define SDRAM_tRAS_num 1
-#define SDRAM_tRCD TRCD_1
-#define SDRAM_tWR TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC8M32B2B5_7)
- /*SDRAM INFORMATION: */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
- /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref 64 /* Refresh period in milliseconds */
-#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
-#define SDRAM_CL CL_3
-#endif
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF 1
-#else
-#define CLKIN_HALF 0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS 1
-#else
-#define PLL_BYPASS 0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0 \
- (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
- flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile
index 38911c6..1f3228e 100644
--- a/arch/blackfin/mach-common/Makefile
+++ b/arch/blackfin/mach-common/Makefile
@@ -11,3 +11,4 @@
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
new file mode 100644
index 0000000..39a94b3
--- /dev/null
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -0,0 +1,93 @@
+/*
+ * arch/blackfin/mach-common/clocks-init.c - reprogram clocks / memory
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+
+#include <asm/dma.h>
+#include <asm/clocks.h>
+#include <asm/mem_init.h>
+
+#define PLL_CTL_VAL \
+ (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
+ (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+
+__attribute__((l1_text))
+static void do_sync(void)
+{
+ __builtin_bfin_ssync();
+}
+
+__attribute__((l1_text))
+void init_clocks(void)
+{
+ /* Kill any active DMAs as they may trigger external memory accesses
+ * in the middle of reprogramming things, and that'll screw us up.
+ * For example, any automatic DMAs left by U-Boot for splash screens.
+ */
+ size_t i;
+ for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; ++i) {
+ struct dma_register *dma = dma_io_base_addr[i];
+ dma->cfg = 0;
+ }
+
+ do_sync();
+
+#ifdef SIC_IWR0
+ bfin_write_SIC_IWR0(IWR_ENABLE(0));
+# ifdef SIC_IWR1
+ /* BF52x system reset does not properly reset SIC_IWR1 which
+ * will screw up the bootrom as it relies on MDMA0/1 waking it
+ * up from IDLE instructions. See this report for more info:
+ * http://blackfin.uclinux.org/gf/tracker/4323
+ */
+ if (ANOMALY_05000435)
+ bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+ else
+ bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+# endif
+# ifdef SIC_IWR2
+ bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
+# endif
+#else
+ bfin_write_SIC_IWR(IWR_ENABLE(0));
+#endif
+ do_sync();
+#ifdef EBIU_SDGCTL
+ bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
+ do_sync();
+#endif
+
+#ifdef CLKBUFOE
+ bfin_write16(VR_CTL, bfin_read_VR_CTL() | CLKBUFOE);
+ do_sync();
+ __asm__ __volatile__("IDLE;");
+#endif
+ bfin_write_PLL_LOCKCNT(0x300);
+ do_sync();
+ bfin_write16(PLL_CTL, PLL_CTL_VAL);
+ __asm__ __volatile__("IDLE;");
+ bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+#ifdef EBIU_SDGCTL
+ bfin_write_EBIU_SDRRC(mem_SDRRC);
+ bfin_write_EBIU_SDGCTL(mem_SDGCTL);
+#else
+ bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
+ do_sync();
+ bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1);
+ bfin_write_EBIU_DDRCTL0(mem_DDRCTL0);
+ bfin_write_EBIU_DDRCTL1(mem_DDRCTL1);
+ bfin_write_EBIU_DDRCTL2(mem_DDRCTL2);
+#ifdef CONFIG_MEM_EBIU_DDRQUE
+ bfin_write_EBIU_DDRQUE(CONFIG_MEM_EBIU_DDRQUE);
+#endif
+#endif
+ do_sync();
+ bfin_read16(0);
+}
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index a621ae4..e1e42c0 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -147,7 +147,7 @@
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bfin_relocate_l1_mem;
#ifdef CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
+ call _init_clocks;
#endif
/* This section keeps the processor in supervisor mode