atl1c: Do not use legacy PCI power management
The atl1c driver uses the legacy PCI power management, so it has to
do some PCI-specific things in its ->suspend() and ->resume()
callbacks and they are not done correctly.
Convert atl1c to the new PCI power management framework and make it
let the PCI subsystem handle all of the PCI-specific aspects of
device handling during system power transitions.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 09b099b..bdf11d8 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -702,6 +702,7 @@
adapter->wol = 0;
+ device_set_wakeup_enable(&pdev->dev, false);
adapter->link_speed = SPEED_0;
adapter->link_duplex = FULL_DUPLEX;
adapter->num_rx_queues = AT_DEF_RECEIVE_QUEUE;
@@ -2444,8 +2445,9 @@
return 0;
}
-static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state)
+static int atl1c_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
struct atl1c_adapter *adapter = netdev_priv(netdev);
struct atl1c_hw *hw = &adapter->hw;
@@ -2454,7 +2456,6 @@
u32 wol_ctrl_data = 0;
u16 mii_intr_status_data = 0;
u32 wufc = adapter->wol;
- int retval = 0;
atl1c_disable_l0s_l1(hw);
if (netif_running(netdev)) {
@@ -2462,9 +2463,6 @@
atl1c_down(adapter);
}
netif_device_detach(netdev);
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
if (wufc)
if (atl1c_phy_power_saving(hw) != 0)
@@ -2525,12 +2523,8 @@
AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
- /* pcie patch */
- device_set_wakeup_enable(&pdev->dev, 1);
-
AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT |
GPHY_CTRL_EXT_RESET);
- pci_prepare_to_sleep(pdev);
} else {
AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_POWER_SAVING);
master_ctrl_data |= MASTER_CTRL_CLK_SEL_DIS;
@@ -2540,25 +2534,17 @@
AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
hw->phy_configured = false; /* re-init PHY when resume */
- pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
}
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
return 0;
}
-static int atl1c_resume(struct pci_dev *pdev)
+static int atl1c_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
struct atl1c_adapter *adapter = netdev_priv(netdev);
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
-
AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE |
ATL1C_PCIE_PHY_RESET);
@@ -2582,7 +2568,12 @@
static void atl1c_shutdown(struct pci_dev *pdev)
{
- atl1c_suspend(pdev, PMSG_SUSPEND);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+ atl1c_suspend(&pdev->dev);
+ pci_wake_from_d3(pdev, adapter->wol);
+ pci_set_power_state(pdev, PCI_D3hot);
}
static const struct net_device_ops atl1c_netdev_ops = {
@@ -2886,16 +2877,16 @@
.resume = atl1c_io_resume,
};
+static SIMPLE_DEV_PM_OPS(atl1c_pm_ops, atl1c_suspend, atl1c_resume);
+
static struct pci_driver atl1c_driver = {
.name = atl1c_driver_name,
.id_table = atl1c_pci_tbl,
.probe = atl1c_probe,
.remove = __devexit_p(atl1c_remove),
- /* Power Managment Hooks */
- .suspend = atl1c_suspend,
- .resume = atl1c_resume,
.shutdown = atl1c_shutdown,
- .err_handler = &atl1c_err_handler
+ .err_handler = &atl1c_err_handler,
+ .driver.pm = &atl1c_pm_ops,
};
/*