MIPS: AR7: Implement clock API
This patch makes the ar7 clock code implement the Linux clk API. Drivers
using the various clocks available in the SoC are updated accordingly.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
To: linux-mips@linux-mips.org
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: netdev@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Patchwork: http://patchwork.linux-mips.org/patch/881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 8d0be26..bf2072e 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -36,6 +36,7 @@
#include <linux/phy_fixed.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/clk.h>
#include <asm/gpio.h>
#include <asm/atomic.h>
@@ -294,9 +295,16 @@
static int cpmac_mdio_reset(struct mii_bus *bus)
{
+ struct clk *cpmac_clk;
+
+ cpmac_clk = clk_get(&bus->dev, "cpmac");
+ if (IS_ERR(cpmac_clk)) {
+ printk(KERN_ERR "unable to get cpmac clock\n");
+ return -1;
+ }
ar7_device_reset(AR7_RESET_BIT_MDIO);
cpmac_write(bus->priv, CPMAC_MDIO_CONTROL, MDIOC_ENABLE |
- MDIOC_CLKDIV(ar7_cpmac_freq() / 2200000 - 1));
+ MDIOC_CLKDIV(clk_get_rate(cpmac_clk) / 2200000 - 1));
return 0;
}
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 2e94b71..2bb95cd 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -34,6 +34,7 @@
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/clk.h>
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
@@ -80,6 +81,8 @@
/* Pointer to the remapped WDT IO space */
static struct ar7_wdt *ar7_wdt;
+static struct clk *vbus_clk;
+
static void ar7_wdt_kick(u32 value)
{
WRITE_REG(ar7_wdt->kick_lock, 0x5555);
@@ -138,17 +141,19 @@
static void ar7_wdt_update_margin(int new_margin)
{
u32 change;
+ u32 vbus_rate;
- change = new_margin * (ar7_vbus_freq() / prescale_value);
+ vbus_rate = clk_get_rate(vbus_clk);
+ change = new_margin * (vbus_rate / prescale_value);
if (change < 1)
change = 1;
if (change > 0xffff)
change = 0xffff;
ar7_wdt_change(change);
- margin = change * prescale_value / ar7_vbus_freq();
+ margin = change * prescale_value / vbus_rate;
printk(KERN_INFO DRVNAME
": timer margin %d seconds (prescale %d, change %d, freq %d)\n",
- margin, prescale_value, change, ar7_vbus_freq());
+ margin, prescale_value, change, vbus_rate);
}
static void ar7_wdt_enable_wdt(void)
@@ -298,6 +303,13 @@
goto out_mem_region;
}
+ vbus_clk = clk_get(NULL, "vbus");
+ if (IS_ERR(vbus_clk)) {
+ printk(KERN_ERR DRVNAME ": could not get vbus clock\n");
+ rc = PTR_ERR(vbus_clk);
+ goto out_mem_region;
+ }
+
ar7_wdt_disable_wdt();
ar7_wdt_prescale(prescale_value);
ar7_wdt_update_margin(margin);