iwlwifi: Fix HT compilation breakage caused by cfg80211 API for channels/bitrates patch
This patch fixes compilation breakage caused by 'cfg80211 API for
channels/bitrates' patch.
however it doesn't fix the driver's functional problems caused by that
patch.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index 933e0d4..d0e385a 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -1893,24 +1893,20 @@
return ret_rates;
}
-#ifdef CONFIG_IWL4965_HT
-void static iwl4965_set_ht_capab(struct ieee80211_hw *hw,
- struct ieee80211_ht_cap *ht_cap,
- u8 use_current_config);
-#endif
-
/**
* iwl4965_fill_probe_req - fill in all required fields and IE for probe request
*/
static u16 iwl4965_fill_probe_req(struct iwl4965_priv *priv,
- struct ieee80211_mgmt *frame,
- int left, int is_direct)
+ enum ieee80211_band band,
+ struct ieee80211_mgmt *frame,
+ int left, int is_direct)
{
int len = 0;
u8 *pos = NULL;
u16 active_rates, ret_rates, cck_rates, active_rate_basic;
#ifdef CONFIG_IWL4965_HT
- struct ieee80211_hw_mode *mode;
+ const struct ieee80211_supported_band *sband =
+ iwl4965_get_hw_mode(priv, band);
#endif /* CONFIG_IWL4965_HT */
/* Make sure there is enough space for the probe request,
@@ -1995,13 +1991,18 @@
len += 2 + *pos;
#ifdef CONFIG_IWL4965_HT
- mode = priv->hw->conf.mode;
- if (mode->ht_info.ht_supported) {
+ if (sband && sband->ht_info.ht_supported) {
+ struct ieee80211_ht_cap *ht_cap;
pos += (*pos) + 1;
*pos++ = WLAN_EID_HT_CAPABILITY;
*pos++ = sizeof(struct ieee80211_ht_cap);
- iwl4965_set_ht_capab(priv->hw,
- (struct ieee80211_ht_cap *)pos, 0);
+ ht_cap = (struct ieee80211_ht_cap *)pos;
+ ht_cap->cap_info = cpu_to_le16(sband->ht_info.cap);
+ memcpy(ht_cap->supp_mcs_set, sband->ht_info.supp_mcs_set, 16);
+ ht_cap->ampdu_params_info =(sband->ht_info.ampdu_factor &
+ IEEE80211_HT_CAP_AMPDU_FACTOR) |
+ ((sband->ht_info.ampdu_density << 2) &
+ IEEE80211_HT_CAP_AMPDU_DENSITY);
len += 2 + sizeof(struct ieee80211_ht_cap);
}
#endif /*CONFIG_IWL4965_HT */
@@ -3592,8 +3593,9 @@
tx_status->control.flags &= ~IEEE80211_TXCTL_AMPDU;
tx_status->flags = iwl4965_is_tx_success(status)?
IEEE80211_TX_STATUS_ACK : 0;
+ /* FIXME Wrong Rate
tx_status->control.tx_rate =
- iwl4965_hw_get_rate_n_flags(tx_resp->rate_n_flags);
+ iwl4965_hw_get_rate_n_flags(tx_resp->rate_n_flags); */
/* FIXME: code repetition end */
IWL_DEBUG_TX_REPLY("1 Frame 0x%x failure :%d\n",
@@ -5775,22 +5777,20 @@
}
/* 5.2GHz channels start after the 2.4GHz channels */
-#ifdef CONFIG_IWL4965_HT
- iwl4965_init_ht_hw_capab(&modes[A].ht_info, MODE_IEEE80211A);
-#endif
-#ifdef CONFIG_IWL4965_HT
- iwl4965_init_ht_hw_capab(&modes[G].ht_info, MODE_IEEE80211G);
-#endif
band = &priv->bands[IEEE80211_BAND_5GHZ];
band->channels = &channels[ARRAY_SIZE(iwl4965_eeprom_band_1)];
band->bitrates = &rates[4];
band->n_bitrates = 8; /* just OFDM */
+ iwl4965_init_ht_hw_capab(&band->ht_info, IEEE80211_BAND_5GHZ);
+
band = &priv->bands[IEEE80211_BAND_2GHZ];
band->channels = channels;
band->bitrates = rates;
band->n_bitrates = 12; /* OFDM & CCK */
+ iwl4965_init_ht_hw_capab(&band->ht_info, IEEE80211_BAND_2GHZ);
+
priv->ieee_channels = channels;
priv->ieee_rates = rates;
@@ -6860,8 +6860,9 @@
int rc = 0;
struct iwl4965_scan_cmd *scan;
struct ieee80211_conf *conf = NULL;
- u8 direct_mask;
+ u16 cmd_len;
enum ieee80211_band band;
+ u8 direct_mask;
conf = ieee80211_get_hw_conf(priv->hw);
@@ -6970,18 +6971,10 @@
} else
direct_mask = 0;
- /* We don't build a direct scan probe request; the uCode will do
- * that based on the direct_mask added to each channel entry */
- scan->tx_cmd.len = cpu_to_le16(
- iwl4965_fill_probe_req(priv, (struct ieee80211_mgmt *)scan->data,
- IWL_MAX_SCAN_SIZE - sizeof(*scan), 0));
scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
scan->tx_cmd.sta_id = priv->hw_setting.bcast_sta_id;
scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
- /* flags + rate selection */
-
- scan->tx_cmd.tx_flags |= cpu_to_le32(0x200);
switch (priv->scan_bands) {
case 2:
@@ -7007,6 +7000,13 @@
goto done;
}
+ /* We don't build a direct scan probe request; the uCode will do
+ * that based on the direct_mask added to each channel entry */
+ cmd_len = iwl4965_fill_probe_req(priv, band,
+ (struct ieee80211_mgmt *)scan->data,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan), 0);
+
+ scan->tx_cmd.len = cpu_to_le16(cmd_len);
/* select Rx chains */
/* Force use of chains B and C (0x6) for scan Rx.
@@ -7468,10 +7468,10 @@
}
#ifdef CONFIG_IWL4965_HT
- /* if we are switching fron ht to 2.4 clear flags
+ /* if we are switching from ht to 2.4 clear flags
* from any ht related info since 2.4 does not
* support ht */
- if ((le16_to_cpu(priv->staging_rxon.channel) != conf->channel)
+ if ((le16_to_cpu(priv->staging_rxon.channel) != conf->channel->hw_value)
#ifdef IEEE80211_CONF_CHANNEL_SWITCH
&& !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH)
#endif
@@ -8188,27 +8188,6 @@
return 0;
}
-static void iwl4965_set_ht_capab(struct ieee80211_hw *hw,
- struct ieee80211_ht_cap *ht_cap,
- u8 use_current_config)
-{
- struct ieee80211_conf *conf = &hw->conf;
-
- if (use_current_config) {
- ht_cap->cap_info = cpu_to_le16(conf->ht_conf.cap);
- memcpy(ht_cap->supp_mcs_set,
- conf->ht_conf.supp_mcs_set, 16);
- } else {
- ht_cap->cap_info = cpu_to_le16(mode->ht_info.cap);
- memcpy(ht_cap->supp_mcs_set,
- mode->ht_info.supp_mcs_set, 16);
- }
- ht_cap->ampdu_params_info =
- (mode->ht_info.ampdu_factor & IEEE80211_HT_CAP_AMPDU_FACTOR) |
- ((mode->ht_info.ampdu_density << 2) &
- IEEE80211_HT_CAP_AMPDU_DENSITY);
-}
-
#endif /*CONFIG_IWL4965_HT*/
/*****************************************************************************