Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (272 commits)
Fix soc_common PCMCIA configuration
ARM: 5827/1: SA1100: h3100/h3600: emit messages on failed gpio_request
ARM: 5826/1: SA1100: h3100/h3600: always build htc-egpio driver
ARM: 5825/1: SA1100: h3600: update defconfig
ARM: 5824/1: SA1100: reuse h3600 PCMCIA driver on h3100
ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keys
ARM: 5822/1: SA1100: h3100/h3600: clean up #includes
ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplates
ARM: 5820/1: SA1100: h3100/h3600: split h3600.c
ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.h
ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitions
ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputs
ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitions
ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlers
ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to gpiolib
ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driver
ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpers
ARM: 5811/2: pcmcia: convert sa1100_h3600 driver to gpiolib
ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pins
ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.h
...
diff --git a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
index 26422f0..b87292e 100644
--- a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
+++ b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
@@ -55,4 +55,4 @@
This board is maintained by Simtec Electronics.
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 948c871..2af2cf3 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -134,4 +134,4 @@
Ben Dooks, 03 October 2004
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index cff6227..081892d 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -299,4 +299,4 @@
Document Author
---------------
-Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
+Ben Dooks, Copyright 2004-2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
index 295d971..f057876 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
@@ -117,4 +117,4 @@
Document Author
---------------
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
index ab2a888..909bdc7 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
@@ -18,4 +18,4 @@
Document Author
---------------
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
index a30fe51..7edd0e2 100644
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
@@ -133,5 +133,5 @@
Document Author
---------------
-Ben Dooks, (c) 2004 Simtec Electronics
+Ben Dooks, Copyright 2004 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
index 67671eb..f82b1fa 100644
--- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -90,4 +90,4 @@
Document Author
---------------
-Ben Dooks, (c) 2005 Simtec Electronics
+Ben Dooks, Copyright 2005 Simtec Electronics
diff --git a/MAINTAINERS b/MAINTAINERS
index 89ceb40..4a5d676 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -659,6 +659,9 @@
M: Sascha Hauer <kernel@pengutronix.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+T: git://git.pengutronix.de/git/imx/linux-2.6.git
+F: arch/arm/mach-mx*/
+F: arch/arm/plat-mxc/
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
@@ -729,6 +732,19 @@
S: Maintained
F: arch/arm/mach-ixp4xx/
+ARM/INTEL RESEARCH IMOTE 2 MACHINE SUPPORT
+M: Jonathan Cameron <jic23@cam.ac.uk>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-pxa/imote2.c
+
+ARM/INTEL RESEARCH STARGATE 2 MACHINE SUPPORT
+M: Jonathan Cameron <jic23@cam.ac.uk>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-pxa/stargate2.c
+F: drivers/pcmcia/pxa2xx_stargate2.c
+
ARM/INTEL XSC3 (MANZANO) ARM CORE
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
@@ -771,6 +787,14 @@
M: Michael Petchkovsky <mkpetch@internode.on.net>
S: Maintained
+ARM/NOMADIK ARCHITECTURE
+M: Alessandro Rubini <rubini@unipv.it>
+M: STEricsson <STEricsson_nomadik_linux@list.st.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-nomadik/
+F: arch/arm/plat-nomadik/
+
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
M: Nelson Castillo <arhuaco@freaks-unidos.net>
L: openmoko-kernel@lists.openmoko.org (subscribers-only)
@@ -915,6 +939,12 @@
W: http://www.mcuos.com
S: Maintained
+ARM/U8500 ARM ARCHITECTURE
+M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-ux500/
+
ARM/VFP SUPPORT
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c4119c..cf8a99f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -433,6 +433,17 @@
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_DOVE
+ bool "Marvell Dove"
+ select PCI
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select PLAT_ORION
+ help
+ Support for the Marvell Dove SoC 88AP510
+
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
select CPU_FEROCEON
@@ -702,6 +713,16 @@
help
Support for Broadcom's BCMRing platform.
+config ARCH_U8500
+ bool "ST-Ericsson U8500 Series"
+ select CPU_V7
+ select ARM_AMBA
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select COMMON_CLKDEV
+ help
+ Support for ST-Ericsson's Ux500 architecture
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -747,6 +768,9 @@
source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-dove/Kconfig"
+
+source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
@@ -787,6 +811,7 @@
source "arch/arm/plat-mxc/Kconfig"
source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
source "arch/arm/mach-netx/Kconfig"
@@ -804,12 +829,16 @@
source "arch/arm/mach-bcmring/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
config PLAT_IOP
bool
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_TIME
config PLAT_ORION
bool
@@ -955,10 +984,10 @@
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
- select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
+ select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -1027,9 +1056,9 @@
config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
- REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+ REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
default y
- select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
+ select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1a6f70e..ff54c23 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -83,6 +83,14 @@
It does include a timeout to ensure that the system does not
totally freeze when there is nothing connected to read.
+config OC_ETM
+ bool "On-chip ETM and ETB"
+ select ARM_AMBA
+ help
+ Enables the on-chip embedded trace macrocell and embedded trace
+ buffer driver that will allow you to collect traces of the
+ kernel code.
+
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on DEBUG_LL && FOOTBRIDGE
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a73caaf..fa0cdab 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -122,6 +122,7 @@
machine-$(CONFIG_ARCH_BCMRING) := bcmring
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_DAVINCI) := davinci
+machine-$(CONFIG_ARCH_DOVE) := dove
machine-$(CONFIG_ARCH_EBSA110) := ebsa110
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_GEMINI) := gemini
@@ -166,6 +167,7 @@
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
machine-$(CONFIG_ARCH_U300) := u300
+machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_FOOTBRIDGE) := footbridge
@@ -176,11 +178,12 @@
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_PLAT_IOP) := iop
+plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
-plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
-plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
-plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c
+plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung
+plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung
+plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fa6fbf4..d356af7 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -743,6 +743,12 @@
W(b) __armv4_mmu_cache_off
W(b) __armv6_mmu_cache_flush
+ .word 0x560f5810 @ Marvell PJ4 ARMv6
+ .word 0xff0ffff0
+ W(b) __armv4_mmu_cache_on
+ W(b) __armv4_mmu_cache_off
+ W(b) __armv6_mmu_cache_flush
+
.word 0x000f0000 @ new CPU Id
.word 0x000f0000
W(b) __armv7_mmu_cache_on
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 734ac91..5a375e5 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -342,6 +342,22 @@
}
EXPORT_SYMBOL(dma_map_single);
+/*
+ * see if a mapped address was really a "safe" buffer and if so, copy
+ * the data from the safe buffer back to the unsafe buffer and free up
+ * the safe buffer. (basically return things back to the way they
+ * should be)
+ */
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction dir)
+{
+ dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
+ __func__, (void *) dma_addr, size, dir);
+
+ unmap_single(dev, dma_addr, size, dir);
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction dir)
{
@@ -366,8 +382,7 @@
* the safe buffer. (basically return things back to the way they
* should be)
*/
-
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
{
dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
@@ -375,7 +390,7 @@
unmap_single(dev, dma_addr, size, dir);
}
-EXPORT_SYMBOL(dma_unmap_single);
+EXPORT_SYMBOL(dma_unmap_page);
int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
unsigned long off, size_t sz, enum dma_data_direction dir)
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 238b218..c97e102 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -120,6 +120,7 @@
# CONFIG_MACH_CARMEVA is not set
# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_ATEB9200 is not set
+CONFIG_MACH_ECO920=y
#
# AT91RM9200 Feature Selections
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index d18d21b..a017086 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,15 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc8
-# Thu Jun 4 09:53:21 2009
+# Linux kernel version: 2.6.32-rc4
+# Tue Oct 13 19:03:13 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +16,14 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -46,11 +44,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
@@ -83,7 +82,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -96,6 +94,10 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
@@ -103,13 +105,17 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -117,11 +123,11 @@
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -142,19 +148,22 @@
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -163,25 +172,27 @@
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
#
# Intel PXA2xx/PXA3xx Implementations
@@ -191,16 +202,19 @@
# Supported PXA3xx Processor Variants
#
CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
+CONFIG_CPU_PXA310=y
# CONFIG_CPU_PXA320 is not set
# CONFIG_CPU_PXA930 is not set
# CONFIG_CPU_PXA935 is not set
+# CONFIG_CPU_PXA950 is not set
# CONFIG_ARCH_GUMSTIX is not set
# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_MACH_MP900C is not set
+# CONFIG_MACH_BALLOON3 is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_ARCH_VIPER is not set
@@ -218,6 +232,7 @@
# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
CONFIG_MACH_CM_X300=y
+# CONFIG_MACH_H4700 is not set
# CONFIG_MACH_MAGICIAN is not set
# CONFIG_MACH_HIMALAYA is not set
# CONFIG_MACH_MIOA701 is not set
@@ -225,8 +240,8 @@
# CONFIG_ARCH_PXA_PALM is not set
# CONFIG_MACH_CSB726 is not set
# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_XCEP is not set
CONFIG_PXA3xx=y
-# CONFIG_PXA_PWM is not set
CONFIG_PLAT_PXA=y
#
@@ -236,7 +251,7 @@
CONFIG_CPU_XSC3=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
@@ -246,11 +261,12 @@
#
# Processor Features
#
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_XSC3L2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_IWMMXT=y
CONFIG_COMMON_CLKDEV=y
@@ -272,11 +288,12 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
CONFIG_HIGHMEM=y
@@ -292,17 +309,19 @@
CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
+CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
@@ -355,6 +374,7 @@
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@@ -396,6 +416,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -410,6 +431,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -433,22 +455,27 @@
#
# Bluetooth device drivers
#
-# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -461,6 +488,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -472,9 +500,9 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
@@ -521,6 +549,9 @@
#
# Self-contained MTD device drivers
#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -556,7 +587,15 @@
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
@@ -570,6 +609,7 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -593,10 +633,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -621,7 +657,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -636,6 +671,7 @@
CONFIG_DM9000=y
CONFIG_DM9000_DEBUGLEVEL=0
CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
@@ -648,20 +684,20 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_HOSTAP is not set
#
@@ -683,6 +719,7 @@
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -706,33 +743,51 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -760,6 +815,7 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
@@ -774,6 +830,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
@@ -784,6 +841,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
@@ -807,19 +865,36 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
@@ -839,11 +914,17 @@
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -860,32 +941,33 @@
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
+CONFIG_PMIC_DA903X=y
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -925,7 +1007,17 @@
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_DA903X=m
#
# Display device support
@@ -956,38 +1048,48 @@
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
CONFIG_SND_ARM=y
CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
# CONFIG_SND_PXA2XX_AC97 is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
#
@@ -1006,10 +1108,12 @@
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
@@ -1023,9 +1127,15 @@
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_WACOM=m
+CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -1054,6 +1164,7 @@
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1151,8 +1262,9 @@
#
CONFIG_MMC_PXA=m
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -1162,8 +1274,10 @@
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DA903X is not set
+# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
@@ -1179,6 +1293,7 @@
#
# iptables trigger is under Netfilter config (LED target)
#
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1210,10 +1325,19 @@
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
@@ -1233,12 +1357,15 @@
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1256,10 +1383,13 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1319,6 +1449,12 @@
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1329,12 +1465,12 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
@@ -1378,7 +1514,7 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
+CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
@@ -1428,6 +1564,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
@@ -1441,6 +1578,7 @@
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1460,32 +1598,20 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
@@ -1509,7 +1635,6 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@@ -1551,11 +1676,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -1591,9 +1718,9 @@
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
@@ -1608,7 +1735,7 @@
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
@@ -1616,6 +1743,8 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
new file mode 100644
index 0000000..b3a4916
--- /dev/null
+++ b/arch/arm/configs/dove_defconfig
@@ -0,0 +1,1620 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Tue Nov 24 13:53:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_DOVE=y
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Marvell Dove Implementations
+#
+CONFIG_MACH_DOVE_DB=y
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_TAUROS2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_ORION=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_MV_CESA is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index d5ee16e..492f29a 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon Jul 7 17:52:21 2008
+# Linux kernel version: 2.6.32-rc5
+# Mon Nov 2 13:18:50 2009
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
@@ -9,24 +9,22 @@
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -35,7 +33,7 @@
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="-ezxdev"
+CONFIG_LOCALVERSION="-ezx200910312315"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
@@ -44,56 +42,78 @@
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -101,12 +121,10 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -120,25 +138,27 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -146,39 +166,64 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_BCMRING is not set
#
# Intel PXA2xx/PXA3xx Implementations
#
# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
# CONFIG_ARCH_LUBBOCK is not set
# CONFIG_MACH_LOGICPD_PXA270 is not set
# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_MACH_BALLOON3 is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
# CONFIG_MACH_ZYLONITE is not set
# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
CONFIG_PXA_EZX=y
CONFIG_MACH_EZX_A780=y
CONFIG_MACH_EZX_E680=y
@@ -186,17 +231,11 @@
CONFIG_MACH_EZX_A910=y
CONFIG_MACH_EZX_E6=y
CONFIG_MACH_EZX_E2=y
+# CONFIG_MACH_XCEP is not set
CONFIG_PXA27x=y
CONFIG_PXA_SSP=y
-CONFIG_PXA_PWM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
#
# Processor Type
@@ -205,7 +244,7 @@
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
@@ -216,9 +255,10 @@
#
CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
@@ -231,44 +271,71 @@
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
#
-# CPU Frequency scaling
+# CPU Power Management
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Floating point emulation
@@ -285,6 +352,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
@@ -297,11 +366,8 @@
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -315,6 +381,7 @@
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -342,7 +409,6 @@
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
@@ -393,18 +459,22 @@
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -413,20 +483,23 @@
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -434,20 +507,21 @@
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -455,8 +529,8 @@
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -469,9 +543,9 @@
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
@@ -483,30 +557,29 @@
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+CONFIG_STP=m
CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
@@ -517,9 +590,11 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
#
# Network testing
@@ -529,64 +604,34 @@
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
-CONFIG_BT_L2CAP=m
+CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
+CONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_MESH is not set
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -598,13 +643,19 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
@@ -616,9 +667,9 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
@@ -647,7 +698,7 @@
# CONFIG_MTD_CFI_I2 is not set
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
+CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
@@ -655,19 +706,15 @@
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_XIP=y
+# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PXA2XX=y
# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -675,6 +722,7 @@
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -690,6 +738,11 @@
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -700,15 +753,14 @@
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -722,7 +774,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -732,13 +783,11 @@
# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
#
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -765,6 +814,7 @@
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -786,29 +836,45 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=y
CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_TOUCHSCREEN_PCAP=y
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_ATI_REMOTE is not set
@@ -816,7 +882,10 @@
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_PCAP=y
#
# Hardware I/O ports
@@ -828,6 +897,7 @@
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -842,92 +912,130 @@
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=8
# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
#
-# GPIO Support
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
#
+# PCI GPIO expanders:
+#
+
+#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -938,54 +1046,170 @@
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
CONFIG_EZX_PCAP=y
-
-#
-# Multimedia devices
-#
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_PCAP=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=y
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_PXA27x is not set
CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+CONFIG_RADIO_TEA5764=y
+CONFIG_RADIO_TEA5764_XTAL=y
# CONFIG_DAB is not set
#
@@ -996,6 +1220,7 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1017,15 +1242,19 @@
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
# CONFIG_FB_PXA_SMARTPANEL is not set
CONFIG_FB_PXA_PARAMETERS=y
# CONFIG_FB_MBX is not set
-# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_W100 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PWM=y
#
@@ -1053,85 +1282,60 @@
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-
-#
-# SPI devices
-#
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_SND_PXA2XX_SOC=y
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_APPLE=m
+# CONFIG_HID_WACOM is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1150,32 +1354,42 @@
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_LIBUSUAL is not set
@@ -1183,7 +1397,6 @@
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -1196,7 +1409,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1204,62 +1417,94 @@
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_GADGET_DUALSPEED is not set
# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_PXA=y
-# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_LP3944=y
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1267,7 +1512,14 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1297,45 +1549,67 @@
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PCAP=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
-CONFIG_FS_MBCACHE=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -1350,6 +1624,10 @@
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1357,6 +1635,12 @@
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
@@ -1381,15 +1665,13 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1397,13 +1679,35 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1411,19 +1715,18 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
+# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
-# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1490,25 +1793,83 @@
#
# Kernel hacking
#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
@@ -1516,12 +1877,20 @@
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -1549,14 +1918,20 @@
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
@@ -1587,28 +1962,40 @@
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index f6aed77..efa78e1 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,86 +1,189 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Thu Jun 9 01:59:03 2005
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 24 00:09:30 2009
#
CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+CONFIG_AIO=y
#
-# Loadable module support
+# Kernel Performance Events And Counters
#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_FREEZER=y
#
# System Type
#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_BCMRING is not set
#
# SA11x0 Implementations
@@ -106,27 +209,31 @@
CONFIG_CPU_SA1100=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
#
# Bus support
#
CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
@@ -138,11 +245,41 @@
#
# Kernel Features
#
-# CONFIG_SMP is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@@ -151,22 +288,26 @@
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
#
-# CPU Frequency scaling
+# CPU Power Management
#
CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_SA1100=y
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
@@ -183,6 +324,8 @@
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
@@ -191,190 +334,13 @@
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
@@ -382,10 +348,16 @@
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
@@ -394,18 +366,28 @@
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -413,23 +395,19 @@
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
CONFIG_IRDA=m
#
@@ -461,60 +439,185 @@
#
#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
# FIR device drivers
#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=m
-# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_SA1100=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
+# CONFIG_WLAN is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
@@ -525,10 +628,6 @@
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -537,20 +636,23 @@
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_SLHC=m
# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -560,7 +662,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -568,47 +669,42 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
-CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
@@ -618,71 +714,125 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
+# CONFIG_SPI is not set
#
-# Misc devices
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
#
#
-# Multimedia devices
+# I2C GPIO expanders:
#
-# CONFIG_VIDEO_DEV is not set
#
-# Digital Video Broadcasting Devices
+# PCI GPIO expanders:
#
-# CONFIG_DVB is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+CONFIG_HTC_EGPIO=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
CONFIG_FB_SA1100=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -691,65 +841,54 @@
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
@@ -771,16 +910,13 @@
# Pseudo filesystems
#
CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -788,34 +924,37 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -831,10 +970,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
@@ -875,20 +1010,34 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_DEBUG_USER is not set
#
@@ -896,21 +1045,120 @@
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
#
-# Hardware crypto devices
+# Authenticated Encryption with Associated Data
#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index a4f9a2a..7734cca 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Tue Jul 28 14:11:34 2009
+# Linux kernel version: 2.6.32-rc5
+# Sun Nov 1 22:56:24 2009
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
@@ -9,7 +9,6 @@
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -46,11 +45,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -87,16 +87,14 @@
CONFIG_AIO=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
@@ -139,6 +137,7 @@
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
@@ -153,6 +152,7 @@
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -175,18 +175,22 @@
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
#
# Freescale MXC Implementations
#
# CONFIG_ARCH_MX1 is not set
# CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MXC91231 is not set
CONFIG_ARCH_MX31=y
CONFIG_ARCH_MX35=y
@@ -205,6 +209,7 @@
CONFIG_MACH_PCM043=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_KZM_ARM11_01=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_ARCH_HAS_RNGA=y
@@ -218,7 +223,7 @@
# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
@@ -236,6 +241,7 @@
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_L2X0=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
@@ -257,6 +263,8 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
@@ -277,6 +285,7 @@
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -326,6 +335,7 @@
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@@ -367,6 +377,7 @@
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -407,6 +418,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
@@ -416,9 +428,9 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -587,14 +599,12 @@
# CONFIG_B44 is not set
# CONFIG_CS89x0 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@@ -608,6 +618,7 @@
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -630,7 +641,14 @@
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
@@ -649,6 +667,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -681,15 +700,17 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
@@ -712,6 +733,10 @@
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
CONFIG_W1=y
#
@@ -734,7 +759,6 @@
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -759,12 +783,24 @@
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_CONFIG_MODE_0=y
CONFIG_MFD_WM8352_CONFIG_MODE_0=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_MEDIA_SUPPORT=y
#
@@ -874,10 +910,12 @@
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_MXC=y
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
@@ -896,16 +934,11 @@
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_WM8350=y
-# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -921,6 +954,7 @@
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
@@ -995,7 +1029,6 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1033,6 +1066,7 @@
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -1062,7 +1096,6 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
@@ -1104,11 +1137,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/nuc910_defconfig
similarity index 100%
rename from arch/arm/configs/w90p910_defconfig
rename to arch/arm/configs/nuc910_defconfig
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
new file mode 100644
index 0000000..df1de9b
--- /dev/null
+++ b/arch/arm/configs/nuc950_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:31:33 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC950=y
+
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+
+#
+# NUC950 Machines
+#
+CONFIG_MACH_W90P950EVB=y
+
+#
+# NUC960 Machines
+#
+# CONFIG_MACH_W90N960EVB is not set
+
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
new file mode 100644
index 0000000..4b2cd9e
--- /dev/null
+++ b/arch/arm/configs/nuc960_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:20:11 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC960=y
+
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+
+#
+# NUC950 Machines
+#
+# CONFIG_MACH_W90P950EVB is not set
+
+#
+# NUC960 Machines
+#
+CONFIG_MACH_W90N960EVB=y
+
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
new file mode 100644
index 0000000..15fde22
--- /dev/null
+++ b/arch/arm/configs/u8500_defconfig
@@ -0,0 +1,680 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Mon Nov 30 11:11:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_ARCH_U8500=y
+CONFIG_PLAT_NOMADIK=y
+CONFIG_HAS_MTU=y
+
+#
+# ST-Ericsson platform type
+#
+
+#
+# ST-Ericsson Multicore Mobile Platforms
+#
+CONFIG_MACH_U8500_MOP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PL022=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 3d0cdd2..9fd6d3a 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -331,15 +331,15 @@
* Convert calls to our calling convention.
*/
#define flush_cache_all() __cpuc_flush_kern_all()
-#ifndef CONFIG_CPU_CACHE_VIPT
-static inline void flush_cache_mm(struct mm_struct *mm)
+
+static inline void vivt_flush_cache_mm(struct mm_struct *mm)
{
if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
__cpuc_flush_user_all();
}
static inline void
-flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
@@ -347,7 +347,7 @@
}
static inline void
-flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
{
if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = user_addr & PAGE_MASK;
@@ -356,7 +356,7 @@
}
static inline void
-flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
unsigned long uaddr, void *kaddr,
unsigned long len, int write)
{
@@ -365,6 +365,16 @@
__cpuc_coherent_kern_range(addr, addr + len);
}
}
+
+#ifndef CONFIG_CPU_CACHE_VIPT
+#define flush_cache_mm(mm) \
+ vivt_flush_cache_mm(mm)
+#define flush_cache_range(vma,start,end) \
+ vivt_flush_cache_range(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) \
+ vivt_flush_cache_page(vma,addr,pfn)
+#define flush_ptrace_access(vma,page,ua,ka,len,write) \
+ vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
#else
extern void flush_cache_mm(struct mm_struct *mm);
extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
@@ -410,8 +420,6 @@
*/
extern void flush_dcache_page(struct page *);
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
static inline void __flush_icache_all(void)
{
#ifdef CONFIG_ARM_ERRATA_411920
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index ff46dfa..a96300b 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -15,20 +15,15 @@
* must not be used by drivers.
*/
#ifndef __arch_page_to_dma
-
-#if !defined(CONFIG_HIGHMEM)
-static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
-{
- return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
-}
-#elif defined(__pfn_to_bus)
static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
{
return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
}
-#else
-#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
-#endif
+
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+{
+ return pfn_to_page(__bus_to_pfn(addr));
+}
static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
{
@@ -45,6 +40,11 @@
return __arch_page_to_dma(dev, page);
}
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+{
+ return __arch_dma_to_page(dev, addr);
+}
+
static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
{
return __arch_dma_to_virt(dev, addr);
@@ -257,9 +257,11 @@
*/
extern dma_addr_t dma_map_single(struct device *, void *, size_t,
enum dma_data_direction);
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+ enum dma_data_direction);
extern dma_addr_t dma_map_page(struct device *, struct page *,
unsigned long, size_t, enum dma_data_direction);
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+extern void dma_unmap_page(struct device *, dma_addr_t, size_t,
enum dma_data_direction);
/*
@@ -352,7 +354,6 @@
{
/* nothing to do */
}
-#endif /* CONFIG_DMABOUNCE */
/**
* dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
@@ -371,8 +372,9 @@
static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
- dma_unmap_single(dev, handle, size, dir);
+ /* nothing to do */
}
+#endif /* CONFIG_DMABOUNCE */
/**
* dma_sync_single_range_for_cpu
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
new file mode 100644
index 0000000..538f17c
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/include/asm/hardware/cache-tauros2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init tauros2_init(void);
diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h
new file mode 100644
index 0000000..f82b25d
--- /dev/null
+++ b/arch/arm/include/asm/hardware/coresight.h
@@ -0,0 +1,165 @@
+/*
+ * linux/arch/arm/include/asm/hardware/coresight.h
+ *
+ * CoreSight components' registers
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_HARDWARE_CORESIGHT_H
+#define __ASM_HARDWARE_CORESIGHT_H
+
+#define TRACER_ACCESSED_BIT 0
+#define TRACER_RUNNING_BIT 1
+#define TRACER_CYCLE_ACC_BIT 2
+#define TRACER_ACCESSED BIT(TRACER_ACCESSED_BIT)
+#define TRACER_RUNNING BIT(TRACER_RUNNING_BIT)
+#define TRACER_CYCLE_ACC BIT(TRACER_CYCLE_ACC_BIT)
+
+struct tracectx {
+ unsigned int etb_bufsz;
+ void __iomem *etb_regs;
+ void __iomem *etm_regs;
+ unsigned long flags;
+ int ncmppairs;
+ int etm_portsz;
+ struct device *dev;
+ struct clk *emu_clk;
+ struct mutex mutex;
+};
+
+#define TRACER_TIMEOUT 10000
+
+#define etm_writel(t, v, x) \
+ (__raw_writel((v), (t)->etm_regs + (x)))
+#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x)))
+
+/* CoreSight Management Registers */
+#define CSMR_LOCKACCESS 0xfb0
+#define CSMR_LOCKSTATUS 0xfb4
+#define CSMR_AUTHSTATUS 0xfb8
+#define CSMR_DEVID 0xfc8
+#define CSMR_DEVTYPE 0xfcc
+/* CoreSight Component Registers */
+#define CSCR_CLASS 0xff4
+
+#define CSCR_PRSR 0x314
+
+#define UNLOCK_MAGIC 0xc5acce55
+
+/* ETM control register, "ETM Architecture", 3.3.1 */
+#define ETMR_CTRL 0
+#define ETMCTRL_POWERDOWN 1
+#define ETMCTRL_PROGRAM (1 << 10)
+#define ETMCTRL_PORTSEL (1 << 11)
+#define ETMCTRL_DO_CONTEXTID (3 << 14)
+#define ETMCTRL_PORTMASK1 (7 << 4)
+#define ETMCTRL_PORTMASK2 (1 << 21)
+#define ETMCTRL_PORTMASK (ETMCTRL_PORTMASK1 | ETMCTRL_PORTMASK2)
+#define ETMCTRL_PORTSIZE(x) ((((x) & 7) << 4) | (!!((x) & 8)) << 21)
+#define ETMCTRL_DO_CPRT (1 << 1)
+#define ETMCTRL_DATAMASK (3 << 2)
+#define ETMCTRL_DATA_DO_DATA (1 << 2)
+#define ETMCTRL_DATA_DO_ADDR (1 << 3)
+#define ETMCTRL_DATA_DO_BOTH (ETMCTRL_DATA_DO_DATA | ETMCTRL_DATA_DO_ADDR)
+#define ETMCTRL_BRANCH_OUTPUT (1 << 8)
+#define ETMCTRL_CYCLEACCURATE (1 << 12)
+
+/* ETM configuration code register */
+#define ETMR_CONFCODE (0x04)
+
+/* ETM trace start/stop resource control register */
+#define ETMR_TRACESSCTRL (0x18)
+
+/* ETM trigger event register */
+#define ETMR_TRIGEVT (0x08)
+
+/* address access type register bits, "ETM architecture",
+ * table 3-27 */
+/* - access type */
+#define ETMAAT_IFETCH 0
+#define ETMAAT_IEXEC 1
+#define ETMAAT_IEXECPASS 2
+#define ETMAAT_IEXECFAIL 3
+#define ETMAAT_DLOADSTORE 4
+#define ETMAAT_DLOAD 5
+#define ETMAAT_DSTORE 6
+/* - comparison access size */
+#define ETMAAT_JAVA (0 << 3)
+#define ETMAAT_THUMB (1 << 3)
+#define ETMAAT_ARM (3 << 3)
+/* - data value comparison control */
+#define ETMAAT_NOVALCMP (0 << 5)
+#define ETMAAT_VALMATCH (1 << 5)
+#define ETMAAT_VALNOMATCH (3 << 5)
+/* - exact match */
+#define ETMAAT_EXACTMATCH (1 << 7)
+/* - context id comparator control */
+#define ETMAAT_IGNCONTEXTID (0 << 8)
+#define ETMAAT_VALUE1 (1 << 8)
+#define ETMAAT_VALUE2 (2 << 8)
+#define ETMAAT_VALUE3 (3 << 8)
+/* - security level control */
+#define ETMAAT_IGNSECURITY (0 << 10)
+#define ETMAAT_NSONLY (1 << 10)
+#define ETMAAT_SONLY (2 << 10)
+
+#define ETMR_COMP_VAL(x) (0x40 + (x) * 4)
+#define ETMR_COMP_ACC_TYPE(x) (0x80 + (x) * 4)
+
+/* ETM status register, "ETM Architecture", 3.3.2 */
+#define ETMR_STATUS (0x10)
+#define ETMST_OVERFLOW (1 << 0)
+#define ETMST_PROGBIT (1 << 1)
+#define ETMST_STARTSTOP (1 << 2)
+#define ETMST_TRIGGER (1 << 3)
+
+#define etm_progbit(t) (etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT)
+#define etm_started(t) (etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP)
+#define etm_triggered(t) (etm_readl((t), ETMR_STATUS) & ETMST_TRIGGER)
+
+#define ETMR_TRACEENCTRL2 0x1c
+#define ETMR_TRACEENCTRL 0x24
+#define ETMTE_INCLEXCL (1 << 24)
+#define ETMR_TRACEENEVT 0x20
+#define ETMCTRL_OPTS (ETMCTRL_DO_CPRT | \
+ ETMCTRL_DATA_DO_ADDR | \
+ ETMCTRL_BRANCH_OUTPUT | \
+ ETMCTRL_DO_CONTEXTID)
+
+/* ETB registers, "CoreSight Components TRM", 9.3 */
+#define ETBR_DEPTH 0x04
+#define ETBR_STATUS 0x0c
+#define ETBR_READMEM 0x10
+#define ETBR_READADDR 0x14
+#define ETBR_WRITEADDR 0x18
+#define ETBR_TRIGGERCOUNT 0x1c
+#define ETBR_CTRL 0x20
+#define ETBR_FORMATTERCTRL 0x304
+#define ETBFF_ENFTC 1
+#define ETBFF_ENFCONT (1 << 1)
+#define ETBFF_FONFLIN (1 << 4)
+#define ETBFF_MANUAL_FLUSH (1 << 6)
+#define ETBFF_TRIGIN (1 << 8)
+#define ETBFF_TRIGEVT (1 << 9)
+#define ETBFF_TRIGFL (1 << 10)
+
+#define etb_writel(t, v, x) \
+ (__raw_writel((v), (t)->etb_regs + (x)))
+#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x)))
+
+#define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0)
+#define etm_unlock(t) \
+ do { etm_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+
+#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0)
+#define etb_unlock(t) \
+ do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+
+#endif /* __ASM_HARDWARE_CORESIGHT_H */
+
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 8d60ad2..5daea29 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -234,7 +234,13 @@
void iop3xx_map_io(void);
void iop_init_cp6_handler(void);
void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
+
+static inline u32 read_tmr0(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
+ return val;
+}
static inline void write_tmr0(u32 val)
{
@@ -253,6 +259,11 @@
return val;
}
+static inline void write_tcr0(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
+}
+
static inline u32 read_tcr1(void)
{
u32 val;
@@ -260,6 +271,11 @@
return val;
}
+static inline void write_tcr1(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
+}
+
static inline void write_trr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index cefedf0..5421d82 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -125,8 +125,10 @@
* private definitions which should NOT be used outside memory.h
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
*/
+#ifndef __virt_to_phys
#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
/*
* Convert a physical address to a Page Frame Number and back
@@ -134,6 +136,12 @@
#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
+
#ifndef __ASSEMBLY__
/*
@@ -194,7 +202,8 @@
#ifndef __virt_to_bus
#define __virt_to_bus __virt_to_phys
#define __bus_to_virt __phys_to_virt
-#define __pfn_to_bus(x) ((x) << PAGE_SHIFT)
+#define __pfn_to_bus(x) __pfn_to_phys(x)
+#define __bus_to_pfn(x) __phys_to_pfn(x)
#endif
static inline __deprecated unsigned long virt_to_bus(void *x)
@@ -293,11 +302,6 @@
#endif /* !CONFIG_DISCONTIGMEM */
/*
- * For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die.
- */
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-
-/*
* Optional coherency support. Currently used only by selected
* Intel XSC3-based systems.
*/
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 201ccaa..1139768 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -304,13 +304,23 @@
static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+#define __pgprot_modify(prot,mask,bits) \
+ __pgprot((pgprot_val(prot) & ~(mask)) | (bits))
+
/*
* Mark the prot value as uncacheable and unbufferable.
*/
#define pgprot_noncached(prot) \
- __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED)
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
#define pgprot_writecombine(prot) \
- __pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE)
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#if __LINUX_ARM_ARCH__ >= 7
+#define pgprot_dmacoherent(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#else
+#define pgprot_dmacoherent(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
+#endif
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_present(pmd) (pmd_val(pmd))
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index ca2bf2f..9997ad2 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -22,6 +22,24 @@
# define __SWAB_64_THRU_32__
#endif
+#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+ __asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
+ return x;
+}
+#define __arch_swab16 __arch_swab16
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+ __asm__ ("rev %0, %1" : "=r" (x) : "r" (x));
+ return x;
+}
+#define __arch_swab32 __arch_swab32
+
+#else
+
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
{
__u32 t;
@@ -48,3 +66,4 @@
#endif
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index d65b2f5..058e7e9 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -138,21 +138,26 @@
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#endif
-#ifndef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb() dmb()
+#define rmb() dmb()
+#define wmb() dmb()
+#else
#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#endif
+
+#ifndef CONFIG_SMP
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#else
-#define mb() dmb()
-#define rmb() dmb()
-#define wmb() dmb()
-#define smp_mb() dmb()
-#define smp_rmb() dmb()
-#define smp_wmb() dmb()
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
#endif
+
#define read_barrier_depends() do { } while(0)
#define smp_read_barrier_depends() do { } while(0)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 79087dd..e7ccf7e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,6 +17,8 @@
process.o ptrace.o return_address.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o
+obj-$(CONFIG_OC_ETM) += etm.o
+
obj-$(CONFIG_ISA_DMA_API) += dma.o
obj-$(CONFIG_ARCH_ACORN) += ecard.o
obj-$(CONFIG_FIQ) += fiq.o
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
new file mode 100644
index 0000000..8277539
--- /dev/null
+++ b/arch/arm/kernel/etm.c
@@ -0,0 +1,641 @@
+/*
+ * linux/arch/arm/kernel/etm.c
+ *
+ * Driver for ARM's Embedded Trace Macrocell and Embedded Trace Buffer.
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/mutex.h>
+#include <asm/hardware/coresight.h>
+#include <asm/sections.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shishkin");
+
+static struct tracectx tracer;
+
+static inline bool trace_isrunning(struct tracectx *t)
+{
+ return !!(t->flags & TRACER_RUNNING);
+}
+
+static int etm_setup_address_range(struct tracectx *t, int n,
+ unsigned long start, unsigned long end, int exclude, int data)
+{
+ u32 flags = ETMAAT_ARM | ETMAAT_IGNCONTEXTID | ETMAAT_NSONLY | \
+ ETMAAT_NOVALCMP;
+
+ if (n < 1 || n > t->ncmppairs)
+ return -EINVAL;
+
+ /* comparators and ranges are numbered starting with 1 as opposed
+ * to bits in a word */
+ n--;
+
+ if (data)
+ flags |= ETMAAT_DLOADSTORE;
+ else
+ flags |= ETMAAT_IEXEC;
+
+ /* first comparator for the range */
+ etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2));
+ etm_writel(t, start, ETMR_COMP_VAL(n * 2));
+
+ /* second comparator is right next to it */
+ etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2 + 1));
+ etm_writel(t, end, ETMR_COMP_VAL(n * 2 + 1));
+
+ flags = exclude ? ETMTE_INCLEXCL : 0;
+ etm_writel(t, flags | (1 << n), ETMR_TRACEENCTRL);
+
+ return 0;
+}
+
+static int trace_start(struct tracectx *t)
+{
+ u32 v;
+ unsigned long timeout = TRACER_TIMEOUT;
+
+ etb_unlock(t);
+
+ etb_writel(t, 0, ETBR_FORMATTERCTRL);
+ etb_writel(t, 1, ETBR_CTRL);
+
+ etb_lock(t);
+
+ /* configure etm */
+ v = ETMCTRL_OPTS | ETMCTRL_PROGRAM | ETMCTRL_PORTSIZE(t->etm_portsz);
+
+ if (t->flags & TRACER_CYCLE_ACC)
+ v |= ETMCTRL_CYCLEACCURATE;
+
+ etm_unlock(t);
+
+ etm_writel(t, v, ETMR_CTRL);
+
+ while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
+ ;
+ if (!timeout) {
+ dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
+ etm_lock(t);
+ return -EFAULT;
+ }
+
+ etm_setup_address_range(t, 1, (unsigned long)_stext,
+ (unsigned long)_etext, 0, 0);
+ etm_writel(t, 0, ETMR_TRACEENCTRL2);
+ etm_writel(t, 0, ETMR_TRACESSCTRL);
+ etm_writel(t, 0x6f, ETMR_TRACEENEVT);
+
+ v &= ~ETMCTRL_PROGRAM;
+ v |= ETMCTRL_PORTSEL;
+
+ etm_writel(t, v, ETMR_CTRL);
+
+ timeout = TRACER_TIMEOUT;
+ while (etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM && --timeout)
+ ;
+ if (!timeout) {
+ dev_dbg(t->dev, "Waiting for progbit to deassert timed out\n");
+ etm_lock(t);
+ return -EFAULT;
+ }
+
+ etm_lock(t);
+
+ t->flags |= TRACER_RUNNING;
+
+ return 0;
+}
+
+static int trace_stop(struct tracectx *t)
+{
+ unsigned long timeout = TRACER_TIMEOUT;
+
+ etm_unlock(t);
+
+ etm_writel(t, 0x440, ETMR_CTRL);
+ while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
+ ;
+ if (!timeout) {
+ dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
+ etm_lock(t);
+ return -EFAULT;
+ }
+
+ etm_lock(t);
+
+ etb_unlock(t);
+ etb_writel(t, ETBFF_MANUAL_FLUSH, ETBR_FORMATTERCTRL);
+
+ timeout = TRACER_TIMEOUT;
+ while (etb_readl(t, ETBR_FORMATTERCTRL) &
+ ETBFF_MANUAL_FLUSH && --timeout)
+ ;
+ if (!timeout) {
+ dev_dbg(t->dev, "Waiting for formatter flush to commence "
+ "timed out\n");
+ etb_lock(t);
+ return -EFAULT;
+ }
+
+ etb_writel(t, 0, ETBR_CTRL);
+
+ etb_lock(t);
+
+ t->flags &= ~TRACER_RUNNING;
+
+ return 0;
+}
+
+static int etb_getdatalen(struct tracectx *t)
+{
+ u32 v;
+ int rp, wp;
+
+ v = etb_readl(t, ETBR_STATUS);
+
+ if (v & 1)
+ return t->etb_bufsz;
+
+ rp = etb_readl(t, ETBR_READADDR);
+ wp = etb_readl(t, ETBR_WRITEADDR);
+
+ if (rp > wp) {
+ etb_writel(t, 0, ETBR_READADDR);
+ etb_writel(t, 0, ETBR_WRITEADDR);
+
+ return 0;
+ }
+
+ return wp - rp;
+}
+
+/* sysrq+v will always stop the running trace and leave it at that */
+static void etm_dump(void)
+{
+ struct tracectx *t = &tracer;
+ u32 first = 0;
+ int length;
+
+ if (!t->etb_regs) {
+ printk(KERN_INFO "No tracing hardware found\n");
+ return;
+ }
+
+ if (trace_isrunning(t))
+ trace_stop(t);
+
+ etb_unlock(t);
+
+ length = etb_getdatalen(t);
+
+ if (length == t->etb_bufsz)
+ first = etb_readl(t, ETBR_WRITEADDR);
+
+ etb_writel(t, first, ETBR_READADDR);
+
+ printk(KERN_INFO "Trace buffer contents length: %d\n", length);
+ printk(KERN_INFO "--- ETB buffer begin ---\n");
+ for (; length; length--)
+ printk("%08x", cpu_to_be32(etb_readl(t, ETBR_READMEM)));
+ printk(KERN_INFO "\n--- ETB buffer end ---\n");
+
+ /* deassert the overflow bit */
+ etb_writel(t, 1, ETBR_CTRL);
+ etb_writel(t, 0, ETBR_CTRL);
+
+ etb_writel(t, 0, ETBR_TRIGGERCOUNT);
+ etb_writel(t, 0, ETBR_READADDR);
+ etb_writel(t, 0, ETBR_WRITEADDR);
+
+ etb_lock(t);
+}
+
+static void sysrq_etm_dump(int key, struct tty_struct *tty)
+{
+ dev_dbg(tracer.dev, "Dumping ETB buffer\n");
+ etm_dump();
+}
+
+static struct sysrq_key_op sysrq_etm_op = {
+ .handler = sysrq_etm_dump,
+ .help_msg = "ETM buffer dump",
+ .action_msg = "etm",
+};
+
+static int etb_open(struct inode *inode, struct file *file)
+{
+ if (!tracer.etb_regs)
+ return -ENODEV;
+
+ file->private_data = &tracer;
+
+ return nonseekable_open(inode, file);
+}
+
+static ssize_t etb_read(struct file *file, char __user *data,
+ size_t len, loff_t *ppos)
+{
+ int total, i;
+ long length;
+ struct tracectx *t = file->private_data;
+ u32 first = 0;
+ u32 *buf;
+
+ mutex_lock(&t->mutex);
+
+ if (trace_isrunning(t)) {
+ length = 0;
+ goto out;
+ }
+
+ etb_unlock(t);
+
+ total = etb_getdatalen(t);
+ if (total == t->etb_bufsz)
+ first = etb_readl(t, ETBR_WRITEADDR);
+
+ etb_writel(t, first, ETBR_READADDR);
+
+ length = min(total * 4, (int)len);
+ buf = vmalloc(length);
+
+ dev_dbg(t->dev, "ETB buffer length: %d\n", total);
+ dev_dbg(t->dev, "ETB status reg: %x\n", etb_readl(t, ETBR_STATUS));
+ for (i = 0; i < length / 4; i++)
+ buf[i] = etb_readl(t, ETBR_READMEM);
+
+ /* the only way to deassert overflow bit in ETB status is this */
+ etb_writel(t, 1, ETBR_CTRL);
+ etb_writel(t, 0, ETBR_CTRL);
+
+ etb_writel(t, 0, ETBR_WRITEADDR);
+ etb_writel(t, 0, ETBR_READADDR);
+ etb_writel(t, 0, ETBR_TRIGGERCOUNT);
+
+ etb_lock(t);
+
+ length -= copy_to_user(data, buf, length);
+ vfree(buf);
+
+out:
+ mutex_unlock(&t->mutex);
+
+ return length;
+}
+
+static int etb_release(struct inode *inode, struct file *file)
+{
+ /* there's nothing to do here, actually */
+ return 0;
+}
+
+static const struct file_operations etb_fops = {
+ .owner = THIS_MODULE,
+ .read = etb_read,
+ .open = etb_open,
+ .release = etb_release,
+};
+
+static struct miscdevice etb_miscdev = {
+ .name = "tracebuf",
+ .minor = 0,
+ .fops = &etb_fops,
+};
+
+static int __init etb_probe(struct amba_device *dev, struct amba_id *id)
+{
+ struct tracectx *t = &tracer;
+ int ret = 0;
+
+ ret = amba_request_regions(dev, NULL);
+ if (ret)
+ goto out;
+
+ t->etb_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
+ if (!t->etb_regs) {
+ ret = -ENOMEM;
+ goto out_release;
+ }
+
+ amba_set_drvdata(dev, t);
+
+ etb_miscdev.parent = &dev->dev;
+
+ ret = misc_register(&etb_miscdev);
+ if (ret)
+ goto out_unmap;
+
+ t->emu_clk = clk_get(&dev->dev, "emu_src_ck");
+ if (IS_ERR(t->emu_clk)) {
+ dev_dbg(&dev->dev, "Failed to obtain emu_src_ck.\n");
+ return -EFAULT;
+ }
+
+ clk_enable(t->emu_clk);
+
+ etb_unlock(t);
+ t->etb_bufsz = etb_readl(t, ETBR_DEPTH);
+ dev_dbg(&dev->dev, "Size: %x\n", t->etb_bufsz);
+
+ /* make sure trace capture is disabled */
+ etb_writel(t, 0, ETBR_CTRL);
+ etb_writel(t, 0x1000, ETBR_FORMATTERCTRL);
+ etb_lock(t);
+
+ dev_dbg(&dev->dev, "ETB AMBA driver initialized.\n");
+
+out:
+ return ret;
+
+out_unmap:
+ amba_set_drvdata(dev, NULL);
+ iounmap(t->etb_regs);
+
+out_release:
+ amba_release_regions(dev);
+
+ return ret;
+}
+
+static int etb_remove(struct amba_device *dev)
+{
+ struct tracectx *t = amba_get_drvdata(dev);
+
+ amba_set_drvdata(dev, NULL);
+
+ iounmap(t->etb_regs);
+ t->etb_regs = NULL;
+
+ clk_disable(t->emu_clk);
+ clk_put(t->emu_clk);
+
+ amba_release_regions(dev);
+
+ return 0;
+}
+
+static struct amba_id etb_ids[] = {
+ {
+ .id = 0x0003b907,
+ .mask = 0x0007ffff,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver etb_driver = {
+ .drv = {
+ .name = "etb",
+ .owner = THIS_MODULE,
+ },
+ .probe = etb_probe,
+ .remove = etb_remove,
+ .id_table = etb_ids,
+};
+
+/* use a sysfs file "trace_running" to start/stop tracing */
+static ssize_t trace_running_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%x\n", trace_isrunning(&tracer));
+}
+
+static ssize_t trace_running_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ unsigned int value;
+ int ret;
+
+ if (sscanf(buf, "%u", &value) != 1)
+ return -EINVAL;
+
+ mutex_lock(&tracer.mutex);
+ ret = value ? trace_start(&tracer) : trace_stop(&tracer);
+ mutex_unlock(&tracer.mutex);
+
+ return ret ? : n;
+}
+
+static struct kobj_attribute trace_running_attr =
+ __ATTR(trace_running, 0644, trace_running_show, trace_running_store);
+
+static ssize_t trace_info_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ u32 etb_wa, etb_ra, etb_st, etb_fc, etm_ctrl, etm_st;
+ int datalen;
+
+ etb_unlock(&tracer);
+ datalen = etb_getdatalen(&tracer);
+ etb_wa = etb_readl(&tracer, ETBR_WRITEADDR);
+ etb_ra = etb_readl(&tracer, ETBR_READADDR);
+ etb_st = etb_readl(&tracer, ETBR_STATUS);
+ etb_fc = etb_readl(&tracer, ETBR_FORMATTERCTRL);
+ etb_lock(&tracer);
+
+ etm_unlock(&tracer);
+ etm_ctrl = etm_readl(&tracer, ETMR_CTRL);
+ etm_st = etm_readl(&tracer, ETMR_STATUS);
+ etm_lock(&tracer);
+
+ return sprintf(buf, "Trace buffer len: %d\nComparator pairs: %d\n"
+ "ETBR_WRITEADDR:\t%08x\n"
+ "ETBR_READADDR:\t%08x\n"
+ "ETBR_STATUS:\t%08x\n"
+ "ETBR_FORMATTERCTRL:\t%08x\n"
+ "ETMR_CTRL:\t%08x\n"
+ "ETMR_STATUS:\t%08x\n",
+ datalen,
+ tracer.ncmppairs,
+ etb_wa,
+ etb_ra,
+ etb_st,
+ etb_fc,
+ etm_ctrl,
+ etm_st
+ );
+}
+
+static struct kobj_attribute trace_info_attr =
+ __ATTR(trace_info, 0444, trace_info_show, NULL);
+
+static ssize_t trace_mode_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d %d\n",
+ !!(tracer.flags & TRACER_CYCLE_ACC),
+ tracer.etm_portsz);
+}
+
+static ssize_t trace_mode_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ unsigned int cycacc, portsz;
+
+ if (sscanf(buf, "%u %u", &cycacc, &portsz) != 2)
+ return -EINVAL;
+
+ mutex_lock(&tracer.mutex);
+ if (cycacc)
+ tracer.flags |= TRACER_CYCLE_ACC;
+ else
+ tracer.flags &= ~TRACER_CYCLE_ACC;
+
+ tracer.etm_portsz = portsz & 0x0f;
+ mutex_unlock(&tracer.mutex);
+
+ return n;
+}
+
+static struct kobj_attribute trace_mode_attr =
+ __ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
+
+static int __init etm_probe(struct amba_device *dev, struct amba_id *id)
+{
+ struct tracectx *t = &tracer;
+ int ret = 0;
+
+ if (t->etm_regs) {
+ dev_dbg(&dev->dev, "ETM already initialized\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ ret = amba_request_regions(dev, NULL);
+ if (ret)
+ goto out;
+
+ t->etm_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
+ if (!t->etm_regs) {
+ ret = -ENOMEM;
+ goto out_release;
+ }
+
+ amba_set_drvdata(dev, t);
+
+ mutex_init(&t->mutex);
+ t->dev = &dev->dev;
+ t->flags = TRACER_CYCLE_ACC;
+ t->etm_portsz = 1;
+
+ etm_unlock(t);
+ ret = etm_readl(t, CSCR_PRSR);
+
+ t->ncmppairs = etm_readl(t, ETMR_CONFCODE) & 0xf;
+ etm_writel(t, 0x440, ETMR_CTRL);
+ etm_lock(t);
+
+ ret = sysfs_create_file(&dev->dev.kobj,
+ &trace_running_attr.attr);
+ if (ret)
+ goto out_unmap;
+
+ /* failing to create any of these two is not fatal */
+ ret = sysfs_create_file(&dev->dev.kobj, &trace_info_attr.attr);
+ if (ret)
+ dev_dbg(&dev->dev, "Failed to create trace_info in sysfs\n");
+
+ ret = sysfs_create_file(&dev->dev.kobj, &trace_mode_attr.attr);
+ if (ret)
+ dev_dbg(&dev->dev, "Failed to create trace_mode in sysfs\n");
+
+ dev_dbg(t->dev, "ETM AMBA driver initialized.\n");
+
+out:
+ return ret;
+
+out_unmap:
+ amba_set_drvdata(dev, NULL);
+ iounmap(t->etm_regs);
+
+out_release:
+ amba_release_regions(dev);
+
+ return ret;
+}
+
+static int etm_remove(struct amba_device *dev)
+{
+ struct tracectx *t = amba_get_drvdata(dev);
+
+ amba_set_drvdata(dev, NULL);
+
+ iounmap(t->etm_regs);
+ t->etm_regs = NULL;
+
+ amba_release_regions(dev);
+
+ sysfs_remove_file(&dev->dev.kobj, &trace_running_attr.attr);
+ sysfs_remove_file(&dev->dev.kobj, &trace_info_attr.attr);
+ sysfs_remove_file(&dev->dev.kobj, &trace_mode_attr.attr);
+
+ return 0;
+}
+
+static struct amba_id etm_ids[] = {
+ {
+ .id = 0x0003b921,
+ .mask = 0x0007ffff,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver etm_driver = {
+ .drv = {
+ .name = "etm",
+ .owner = THIS_MODULE,
+ },
+ .probe = etm_probe,
+ .remove = etm_remove,
+ .id_table = etm_ids,
+};
+
+static int __init etm_init(void)
+{
+ int retval;
+
+ retval = amba_driver_register(&etb_driver);
+ if (retval) {
+ printk(KERN_ERR "Failed to register etb\n");
+ return retval;
+ }
+
+ retval = amba_driver_register(&etm_driver);
+ if (retval) {
+ amba_driver_unregister(&etb_driver);
+ printk(KERN_ERR "Failed to probe etm\n");
+ return retval;
+ }
+
+ /* not being able to install this handler is not fatal */
+ (void)register_sysrq_key('v', &sysrq_etm_op);
+
+ return 0;
+}
+
+device_initcall(etm_init);
+
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index e5dfc28..573b803 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -32,7 +32,7 @@
* numbers for r1.
*
*/
- .section ".text.head", "ax"
+ __HEAD
ENTRY(stext)
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 38ccbe1..eb62bf9 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -74,7 +74,7 @@
* crap here - that's what the boot loader (or in extreme, well justified
* circumstances, zImage) is for.
*/
- .section ".text.head", "ax"
+ __HEAD
ENTRY(stext)
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index aecf87df..71151bd 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -24,13 +24,11 @@
#else
. = PAGE_OFFSET + TEXT_OFFSET;
#endif
- .text.head : {
- _stext = .;
- _sinittext = .;
- *(.text.head)
- }
.init : { /* Init code and data */
+ _stext = .;
+ _sinittext = .;
+ HEAD_TEXT
INIT_TEXT
_einittext = .;
__proc_info_begin = .;
@@ -42,43 +40,31 @@
__tagtable_begin = .;
*(.taglist.init)
__tagtable_end = .;
- . = ALIGN(16);
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
+
+ INIT_SETUP(16)
+
__early_begin = .;
*(.early_param.init)
__early_end = .;
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- __security_initcall_start = .;
- *(.security_initcall.init)
- __security_initcall_end = .;
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(32);
- __initramfs_start = .;
- usr/built-in.o(.init.ramfs)
- __initramfs_end = .;
-#endif
- . = ALIGN(PAGE_SIZE);
- __per_cpu_load = .;
- __per_cpu_start = .;
- *(.data.percpu.page_aligned)
- *(.data.percpu)
- *(.data.percpu.shared_aligned)
- __per_cpu_end = .;
+
+ INIT_CALLS
+ CON_INITCALL
+ SECURITY_INITCALL
+ INIT_RAM_FS
+
#ifndef CONFIG_XIP_KERNEL
__init_begin = _stext;
INIT_DATA
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
#endif
}
+ PERCPU(PAGE_SIZE)
+
+#ifndef CONFIG_XIP_KERNEL
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+#endif
+
/DISCARD/ : { /* Exit code and data */
EXIT_TEXT
EXIT_DATA
@@ -157,7 +143,7 @@
* first, the init task union, aligned
* to an 8192 byte boundary.
*/
- *(.data.init_task)
+ INIT_TASK_DATA(THREAD_SIZE)
#ifdef CONFIG_XIP_KERNEL
. = ALIGN(PAGE_SIZE);
@@ -167,17 +153,8 @@
__init_end = .;
#endif
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
- /*
- * then the cacheline aligned data
- */
- . = ALIGN(32);
- *(.data.cacheline_aligned)
+ NOSAVE_DATA
+ CACHELINE_ALIGNED_DATA(32)
/*
* The exception fixup table (might need resorting at runtime)
@@ -256,20 +233,10 @@
}
#endif
- .bss : {
- __bss_start = .; /* BSS */
- *(.bss)
- *(COMMON)
- __bss_stop = .;
- _end = .;
- }
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
+ BSS_SECTION(0, 0, 0)
+ _end = .;
+
+ STABS_DEBUG
.comment 0 : { *(.comment) }
}
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2fd8843..0b2ee95 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,5 +1,20 @@
if ARCH_AT91
+config HAVE_AT91_DATAFLASH_CARD
+ bool
+
+config HAVE_NAND_ATMEL_BUSWIDTH_16
+ bool
+
+config HAVE_AT91_USART3
+ bool
+
+config HAVE_AT91_USART4
+ bool
+
+config HAVE_AT91_USART5
+ bool
+
menu "Atmel AT91 System-on-Chip"
choice
@@ -10,54 +25,69 @@
select CPU_ARM920T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_AT91_USART3
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_AT91_USART3
+ select HAVE_AT91_USART4
+ select HAVE_AT91_USART5
config ARCH_AT91SAM9261
bool "AT91SAM9261"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_FB_ATMEL
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_FB_ATMEL
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_FB_ATMEL
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_AT91_USART3
+ select HAVE_FB_ATMEL
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_AT91_USART3
+ select HAVE_AT91_USART4
+ select HAVE_AT91_USART5
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_AT91_USART3
+ select HAVE_FB_ATMEL
config ARCH_AT91CAP9
bool "AT91CAP9"
select CPU_ARM926T
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
+ select HAVE_FB_ATMEL
config ARCH_AT91X40
bool "AT91x40"
@@ -76,93 +106,88 @@
config MACH_ONEARM
bool "Ajeco 1ARM Single Board Computer"
- depends on ARCH_AT91RM9200
help
Select this if you are using Ajeco's 1ARM Single Board Computer.
<http://www.ajeco.fi/products.htm>
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
- depends on ARCH_AT91RM9200
+ select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-DK Development board.
(Discontinued)
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
- depends on ARCH_AT91RM9200
+ select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
config MACH_CSB337
bool "Cogent CSB337"
- depends on ARCH_AT91RM9200
help
Select this if you are using Cogent's CSB337 board.
<http://www.cogcomp.com/csb_csb337.htm>
config MACH_CSB637
bool "Cogent CSB637"
- depends on ARCH_AT91RM9200
help
Select this if you are using Cogent's CSB637 board.
<http://www.cogcomp.com/csb_csb637.htm>
config MACH_CARMEVA
bool "Conitec ARM&EVA"
- depends on ARCH_AT91RM9200
help
Select this if you are using Conitec's AT91RM9200-MCU-Module.
<http://www.conitec.net/english/linuxboard.htm>
config MACH_ATEB9200
bool "Embest ATEB9200"
- depends on ARCH_AT91RM9200
help
Select this if you are using Embest's ATEB9200 board.
<http://www.embedinfo.com/english/product/ATEB9200.asp>
config MACH_KB9200
bool "KwikByte KB920x"
- depends on ARCH_AT91RM9200
help
Select this if you are using KwikByte's KB920x board.
<http://kwikbyte.com/KB9202_description_new.htm>
config MACH_PICOTUX2XX
bool "picotux 200"
- depends on ARCH_AT91RM9200
help
Select this if you are using a picotux 200.
<http://www.picotux.com/>
config MACH_KAFA
bool "Sperry-Sun KAFA board"
- depends on ARCH_AT91RM9200
help
Select this if you are using Sperry-Sun's KAFA board.
config MACH_ECBAT91
bool "emQbit ECB_AT91 SBC"
- depends on ARCH_AT91RM9200
+ select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using emQbit's ECB_AT91 board.
<http://wiki.emqbit.com/free-ecb-at91>
config MACH_YL9200
bool "ucDragon YL-9200"
- depends on ARCH_AT91RM9200
help
Select this if you are using the ucDragon YL-9200 board.
config MACH_CPUAT91
bool "Eukrea CPUAT91"
- depends on ARCH_AT91RM9200
help
Select this if you are using the Eukrea Electromatique's
CPUAT91 board <http://www.eukrea.com/>.
+config MACH_ECO920
+ bool "eco920"
+ help
+ Select this if you are using the eco920 board
+
endif
# ----------------------------------------------------------
@@ -173,7 +198,6 @@
config ARCH_AT91SAM9260_SAM9XE
bool "AT91SAM9XE"
- depends on ARCH_AT91SAM9260
help
Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
They are basically AT91SAM9260s with various sizes of embedded Flash.
@@ -182,28 +206,27 @@
config MACH_AT91SAM9260EK
bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- depends on ARCH_AT91SAM9260
+ select HAVE_AT91_DATAFLASH_CARD
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
config MACH_CAM60
bool "KwikByte KB9260 (CAM60) board"
- depends on ARCH_AT91SAM9260
help
Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
<http://www.kwikbyte.com/KB9260.html>
config MACH_SAM9_L9260
bool "Olimex SAM9-L9260 board"
- depends on ARCH_AT91SAM9260
+ select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
<http://www.olimex.com/dev/sam9-L9260.html>
config MACH_AFEB9260
bool "Custom afeb9260 board v1"
- depends on ARCH_AT91SAM9260
help
Select this if you are using custom afeb9260 board based on
open hardware design. Select this for revision 1 of the board.
@@ -212,21 +235,18 @@
config MACH_USB_A9260
bool "CALAO USB-A9260"
- depends on ARCH_AT91SAM9260
help
Select this if you are using a Calao Systems USB-A9260.
<http://www.calao-systems.com>
config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
- depends on ARCH_AT91SAM9260
help
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
config MACH_CPU9260
bool "Eukrea CPU9260 board"
- depends on ARCH_AT91SAM9260
help
Select this if you are using a Eukrea Electromatique's
CPU9260 Board <http://www.eukrea.com/>
@@ -241,7 +261,8 @@
config MACH_AT91SAM9261EK
bool "Atmel AT91SAM9261-EK Evaluation Kit"
- depends on ARCH_AT91SAM9261
+ select HAVE_AT91_DATAFLASH_CARD
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@@ -256,7 +277,8 @@
config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
- depends on ARCH_AT91SAM9G10
+ select HAVE_AT91_DATAFLASH_CARD
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
@@ -271,21 +293,21 @@
config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK Evaluation Kit"
- depends on ARCH_AT91SAM9263
+ select HAVE_AT91_DATAFLASH_CARD
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
config MACH_USB_A9263
bool "CALAO USB-A9263"
- depends on ARCH_AT91SAM9263
help
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
config MACH_NEOCORE926
bool "Adeneo NEOCORE926"
- depends on ARCH_AT91SAM9263
+ select HAVE_AT91_DATAFLASH_CARD
help
Select this if you are using the Adeneo Neocore 926 board.
@@ -299,7 +321,6 @@
config MACH_AT91SAM9RLEK
bool "Atmel AT91SAM9RL-EK Evaluation Kit"
- depends on ARCH_AT91SAM9RL
help
Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
@@ -313,14 +334,15 @@
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
- depends on ARCH_AT91SAM9G20
+ select HAVE_AT91_DATAFLASH_CARD
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
config MACH_AT91SAM9G20EK_2MMC
bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
- depends on ARCH_AT91SAM9G20
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
@@ -328,7 +350,6 @@
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
- depends on ARCH_AT91SAM9G20
help
Select this if you are using a Eukrea Electromatique's
CPU9G20 Board <http://www.eukrea.com/>
@@ -343,7 +364,7 @@
config MACH_AT91SAM9G45EKES
bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
- depends on ARCH_AT91SAM9G45
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
"ES" at the end of the name means that this board is an
@@ -359,7 +380,8 @@
config MACH_AT91CAP9ADK
bool "Atmel AT91CAP9A-DK Evaluation Kit"
- depends on ARCH_AT91CAP9
+ select HAVE_AT91_DATAFLASH_CARD
+ select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
@@ -388,13 +410,13 @@
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+ depends on HAVE_AT91_DATAFLASH_CARD
help
Enable support for the DataFlash card.
config MTD_NAND_ATMEL_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+ depends on HAVE_NAND_ATMEL_BUSWIDTH_16
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
@@ -456,15 +478,15 @@
config AT91_EARLY_USART3
bool "USART3"
- depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
+ depends on HAVE_AT91_USART3
config AT91_EARLY_USART4
bool "USART4"
- depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
+ depends on HAVE_AT91_USART4
config AT91_EARLY_USART5
bool "USART5"
- depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
+ depends on HAVE_AT91_USART5
endchoice
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index ada440a..709fbad 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -35,6 +35,7 @@
obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
+obj-$(CONFIG_MACH_ECO920) += board-eco920.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -77,6 +78,7 @@
# Power Management
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 332b784..a57af3e 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -131,6 +131,62 @@
/* --------------------------------------------------------------------
+ * USB Host HS (EHCI)
+ * Needs an OHCI host for low and full speed management
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ehci_data;
+
+static struct resource usbh_ehci_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_EHCI_BASE,
+ .end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_UHPHS,
+ .end = AT91SAM9G45_ID_UHPHS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_ehci_device = {
+ .name = "atmel-ehci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_ehci_data,
+ },
+ .resource = usbh_ehci_resources,
+ .num_resources = ARRAY_SIZE(usbh_ehci_resources),
+};
+
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_ehci_data = *data;
+ at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
+ platform_device_register(&at91_usbh_ehci_device);
+}
+#else
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
new file mode 100644
index 0000000..295a966
--- /dev/null
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -0,0 +1,158 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
+#include "generic.h"
+
+static void __init eco920_map_io(void)
+{
+ at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+
+ /* DBGU on ttyS0. (Rx & Tx only */
+ at91_register_uart(0, 0, 0);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init eco920_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata eco920_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC2,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata eco920_usbh_data = {
+ .ports = 1,
+};
+
+static struct at91_udc_data __initdata eco920_udc_data = {
+ .vbus_pin = AT91_PIN_PB12,
+ .pullup_pin = AT91_PIN_PB13,
+};
+
+static struct at91_mmc_data __initdata eco920_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 0,
+};
+
+static struct physmap_flash_data eco920_flash_data = {
+ .width = 2,
+};
+
+static struct resource eco920_flash_resource = {
+ .start = 0x11000000,
+ .end = 0x11ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eco920_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &eco920_flash_data,
+ },
+ .resource = &eco920_flash_resource,
+ .num_resources = 1,
+};
+
+static struct resource at91_beeper_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_TC3,
+ .end = AT91RM9200_BASE_TC3 + 0x39,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device at91_beeper = {
+ .name = "at91_beeper",
+ .id = 0,
+ .resource = at91_beeper_resources,
+ .num_resources = ARRAY_SIZE(at91_beeper_resources),
+};
+
+static struct spi_board_info eco920_spi_devices[] = {
+ { /* CAN controller */
+ .modalias = "tlv5638",
+ .chip_select = 3,
+ .max_speed_hz = 20 * 1000 * 1000,
+ .mode = SPI_CPHA,
+ },
+};
+
+static void __init eco920_board_init(void)
+{
+ at91_add_device_serial();
+ at91_add_device_eth(&eco920_eth_data);
+ at91_add_device_usbh(&eco920_usbh_data);
+ at91_add_device_udc(&eco920_udc_data);
+
+ at91_add_device_mmc(0, &eco920_mmc_data);
+ platform_device_register(&eco920_flash);
+
+ at91_sys_write(AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
+ | AT91_SMC_RWSETUP_(1)
+ | AT91_SMC_DBW_8
+ | AT91_SMC_WSEN
+ | AT91_SMC_NWS_(15));
+
+ at91_set_A_periph(AT91_PIN_PC6, 1);
+
+ at91_set_gpio_input(AT91_PIN_PA23, 0);
+ at91_set_deglitch(AT91_PIN_PA23, 1);
+
+/* Initialization of the Static Memory Controller for Chip Select 3 */
+ at91_sys_write(AT91_SMC_CSR(3),
+ AT91_SMC_DBW_16 | /* 16 bit */
+ AT91_SMC_WSEN |
+ AT91_SMC_NWS_(5) | /* wait states */
+ AT91_SMC_TDF_(1) /* float time */
+ );
+
+ at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper");
+ at91_set_B_periph(AT91_PIN_PB6, 0);
+ platform_device_register(&at91_beeper);
+
+ at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+}
+
+MACHINE_START(ECO920, "eco920")
+ /* Maintainer: Sascha Hauer */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = eco920_map_io,
+ .init_irq = eco920_init_irq,
+ .init_machine = eco920_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 64c3843..1cf4d86 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -366,6 +366,7 @@
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+ at91_add_device_usbh_ehci(&ek_usbh_hs_data);
/* USB HS Device */
at91_add_device_usba(&ek_usba_udc_data);
/* SPI */
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
new file mode 100644
index 0000000..1cfeac1
--- /dev/null
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -0,0 +1,94 @@
+/*
+ * based on arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle support for AT91 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and RAM self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and RAM self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <asm/proc-fns.h>
+#include <linux/io.h>
+
+#include "pm.h"
+
+#define AT91_MAX_STATES 2
+
+static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
+
+static struct cpuidle_driver at91_idle_driver = {
+ .name = "at91_idle",
+ .owner = THIS_MODULE,
+};
+
+/* Actual code that puts the SoC in different idle states */
+static int at91_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_state *state)
+{
+ struct timeval before, after;
+ int idle_time;
+ u32 saved_lpr;
+
+ local_irq_disable();
+ do_gettimeofday(&before);
+ if (state == &dev->states[0])
+ /* Wait for interrupt state */
+ cpu_do_idle();
+ else if (state == &dev->states[1]) {
+ asm("b 1f; .align 5; 1:");
+ asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
+ saved_lpr = sdram_selfrefresh_enable();
+ cpu_do_idle();
+ sdram_selfrefresh_disable(saved_lpr);
+ }
+ do_gettimeofday(&after);
+ local_irq_enable();
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+ (after.tv_usec - before.tv_usec);
+ return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int at91_init_cpuidle(void)
+{
+ struct cpuidle_device *device;
+
+ cpuidle_register_driver(&at91_idle_driver);
+
+ device = &per_cpu(at91_cpuidle_device, smp_processor_id());
+ device->state_count = AT91_MAX_STATES;
+
+ /* Wait for interrupt state */
+ device->states[0].enter = at91_enter_idle;
+ device->states[0].exit_latency = 1;
+ device->states[0].target_residency = 10000;
+ device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(device->states[0].name, "WFI");
+ strcpy(device->states[0].desc, "Wait for interrupt");
+
+ /* Wait for interrupt and RAM self refresh state */
+ device->states[1].enter = at91_enter_idle;
+ device->states[1].exit_latency = 10;
+ device->states[1].target_residency = 10000;
+ device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(device->states[1].name, "RAM_SR");
+ strcpy(device->states[1].desc, "WFI and RAM Self Refresh");
+
+ if (cpuidle_register_device(device)) {
+ printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 2f4fced..2295d80 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -98,6 +98,7 @@
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4028724..6156689 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -29,62 +29,7 @@
#include <mach/cpu.h>
#include "generic.h"
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#include <mach/at91rm9200_mc.h>
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- */
-#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1)
-#define sdram_selfrefresh_disable() do {} while (0)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
- u32 lpr;
-
- saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
-
- lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
- at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
-
-#else
-#include <mach/at91sam9_sdramc.h>
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
- */
-#define AT91_SDRAMC AT91_SDRAMC0
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
- u32 lpr;
-
- saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-
- lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
- at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-
-#endif
-
+#include "pm.h"
/*
* Show the reason for the previous system reset.
@@ -260,6 +205,7 @@
static int at91_pm_enter(suspend_state_t state)
{
+ u32 saved_lpr;
at91_gpio_suspend();
at91_irq_suspend();
@@ -315,9 +261,9 @@
*/
asm("b 1f; .align 5; 1:");
asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
- sdram_selfrefresh_enable();
+ saved_lpr = sdram_selfrefresh_enable();
asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
- sdram_selfrefresh_disable();
+ sdram_selfrefresh_disable(saved_lpr);
break;
case PM_SUSPEND_ON:
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
new file mode 100644
index 0000000..08322c4
--- /dev/null
+++ b/arch/arm/mach-at91/pm.h
@@ -0,0 +1,67 @@
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ *
+ * Self-refresh mode is exited as soon as a memory access is made, but we don't
+ * know for sure when that happens. However, we need to restore the low-power
+ * mode if it was enabled before going idle. Restoring low-power mode while
+ * still in self-refresh is "not recommended", but seems to work.
+ */
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+ u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+ at91_sys_write(AT91_SDRAMC_LPR, 0);
+ at91_sys_write(AT91_SDRAMC_SRR, 1);
+ return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+ u32 saved_lpr, lpr;
+
+ saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+
+ lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
+ at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+ return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+
+#else
+#include <mach/at91sam9_sdramc.h>
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define AT91_SDRAMC AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+ u32 saved_lpr, lpr;
+
+ saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+ lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
+ at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+ return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
index 4db0eff..dae5e9b 100644
--- a/arch/arm/mach-bcmring/include/mach/io.h
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -23,34 +23,11 @@
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(a) ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
-
-/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
-/* happen in readw/writew etc. */
-
-#define readb(c) __raw_readb(c)
-#define readw(c) __raw_readw(c)
-#define readl(c) __raw_readl(c)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define readsb(p, d, l) __raw_readsb(p, d, l)
-#define readsw(p, d, l) __raw_readsw(p, d, l)
-#define readsl(p, d, l) __raw_readsl(p, d, l)
-
-#define writeb(v, c) __raw_writeb(v, c)
-#define writew(v, c) __raw_writew(v, c)
-#define writel(v, c) __raw_writel(v, c)
-
-#define writesb(p, d, l) __raw_writesb(p, d, l)
-#define writesw(p, d, l) __raw_writesw(p, d, l)
-#define writesl(p, d, l) __raw_writesl(p, d, l)
-
-#define memset_io(c, v, l) _memset_io((c), (v), (l))
-#define memcpy_fromio(a, c, l) _memcpy_fromio((a), (c), (l))
-#define memcpy_toio(c, a, l) _memcpy_toio((c), (a), (l))
-
-#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
#endif
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
new file mode 100644
index 0000000..3b9a32a
--- /dev/null
+++ b/arch/arm/mach-dove/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_DOVE
+
+menu "Marvell Dove Implementations"
+
+config MACH_DOVE_DB
+ bool "Marvell DB-MV88AP510 Development Board"
+ select I2C_BOARDINFO
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell DB-MV88AP510 Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
new file mode 100644
index 0000000..7ab3be5
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile
@@ -0,0 +1,3 @@
+obj-y += common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
new file mode 100644
index 0000000..67039c3
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c
new file mode 100644
index 0000000..00be4fc
--- /dev/null
+++ b/arch/arm/mach-dove/addr-map.c
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-dove/addr-map.c
+ *
+ * Address map functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR 0x0
+#define TARGET_BOOTROM 0x1
+#define TARGET_CESA 0x3
+#define TARGET_PCIE0 0x4
+#define TARGET_PCIE1 0x8
+#define TARGET_SCRATCHPAD 0xd
+
+#define ATTR_CESA 0x01
+#define ATTR_BOOTROM 0xfd
+#define ATTR_DEV_SPI0_ROM 0xfe
+#define ATTR_DEV_SPI1_ROM 0xfb
+#define ATTR_PCIE_IO 0xe0
+#define ATTR_PCIE_MEM 0xe8
+#define ATTR_SCRATCHPAD 0x0
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
+#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
+#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
+#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
+
+struct mbus_dram_target_info dove_mbus_dram_info;
+
+static inline void __iomem *ddr_map_sc(int i)
+{
+ return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
+}
+
+static int cpu_win_can_remap(int win)
+{
+ if (win < 4)
+ return 1;
+
+ return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+ u8 target, u8 attr, int remap)
+{
+ u32 ctrl;
+
+ base &= 0xffff0000;
+ ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+ writel(base, WIN_BASE(win));
+ writel(ctrl, WIN_CTRL(win));
+ if (cpu_win_can_remap(win)) {
+ if (remap < 0)
+ remap = base;
+ writel(remap & 0xffff0000, WIN_REMAP_LO(win));
+ writel(0, WIN_REMAP_HI(win));
+ }
+}
+
+void __init dove_setup_cpu_mbus(void)
+{
+ int i;
+ int cs;
+
+ /*
+ * First, disable and clear windows.
+ */
+ for (i = 0; i < 8; i++) {
+ writel(0, WIN_BASE(i));
+ writel(0, WIN_CTRL(i));
+ if (cpu_win_can_remap(i)) {
+ writel(0, WIN_REMAP_LO(i));
+ writel(0, WIN_REMAP_HI(i));
+ }
+ }
+
+ /*
+ * Setup windows for PCIe IO+MEM space.
+ */
+ setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
+ setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
+ setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+ setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+ /*
+ * Setup window for CESA engine.
+ */
+ setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+ TARGET_CESA, ATTR_CESA, -1);
+
+ /*
+ * Setup the Window to the BootROM for Standby and Sleep Resume
+ */
+ setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+ TARGET_BOOTROM, ATTR_BOOTROM, -1);
+
+ /*
+ * Setup the Window to the PMU Scratch Pad space
+ */
+ setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+ TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+
+ /*
+ * Setup MBUS dram target info.
+ */
+ dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+ for (i = 0, cs = 0; i < 2; i++) {
+ u32 map = readl(ddr_map_sc(i));
+
+ /*
+ * Chip select enabled?
+ */
+ if (map & 1) {
+ struct mbus_dram_window *w;
+
+ w = &dove_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0; /* CS address decoding done inside */
+ /* the DDR controller, no need to */
+ /* provide attributes */
+ w->base = map & 0xff800000;
+ w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+ }
+ }
+ dove_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
new file mode 100644
index 0000000..806972a
--- /dev/null
+++ b/arch/arm/mach-dove/common.c
@@ -0,0 +1,781 @@
+/*
+ * arch/arm/mach-dove/common.c
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/gpio.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/timex.h>
+#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/pci.h>
+#include <mach/dove.h>
+#include <mach/bridge-regs.h>
+#include <asm/mach/arch.h>
+#include <linux/irq.h>
+#include <plat/mv_xor.h>
+#include <plat/ehci-orion.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc dove_io_desc[] __initdata = {
+ {
+ .virtual = DOVE_SB_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
+ .length = DOVE_SB_REGS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = DOVE_NB_REGS_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
+ .length = DOVE_NB_REGS_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = DOVE_PCIE0_IO_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
+ .length = DOVE_PCIE0_IO_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = DOVE_PCIE1_IO_VIRT_BASE,
+ .pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
+ .length = DOVE_PCIE1_IO_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init dove_map_io(void)
+{
+ iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
+}
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data dove_ehci_data = {
+ .dram = &dove_mbus_dram_info,
+ .phy_version = EHCI_PHY_NA,
+};
+
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource dove_ehci0_resources[] = {
+ {
+ .start = DOVE_USB0_PHYS_BASE,
+ .end = DOVE_USB0_PHYS_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_USB0,
+ .end = IRQ_DOVE_USB0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_ehci0 = {
+ .name = "orion-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dove_ehci_data,
+ },
+ .resource = dove_ehci0_resources,
+ .num_resources = ARRAY_SIZE(dove_ehci0_resources),
+};
+
+void __init dove_ehci0_init(void)
+{
+ platform_device_register(&dove_ehci0);
+}
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource dove_ehci1_resources[] = {
+ {
+ .start = DOVE_USB1_PHYS_BASE,
+ .end = DOVE_USB1_PHYS_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_USB1,
+ .end = IRQ_DOVE_USB1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_ehci1 = {
+ .name = "orion-ehci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ehci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dove_ehci_data,
+ },
+ .resource = dove_ehci1_resources,
+ .num_resources = ARRAY_SIZE(dove_ehci1_resources),
+};
+
+void __init dove_ehci1_init(void)
+{
+ platform_device_register(&dove_ehci1);
+}
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
+ .t_clk = 0,
+ .dram = &dove_mbus_dram_info,
+};
+
+static struct resource dove_ge00_shared_resources[] = {
+ {
+ .name = "ge00 base",
+ .start = DOVE_GE00_PHYS_BASE + 0x2000,
+ .end = DOVE_GE00_PHYS_BASE + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dove_ge00_shared = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &dove_ge00_shared_data,
+ },
+ .num_resources = 1,
+ .resource = dove_ge00_shared_resources,
+};
+
+static struct resource dove_ge00_resources[] = {
+ {
+ .name = "ge00 irq",
+ .start = IRQ_DOVE_GE00_SUM,
+ .end = IRQ_DOVE_GE00_SUM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_ge00 = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = 1,
+ .resource = dove_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+ eth_data->shared = &dove_ge00_shared;
+ dove_ge00.dev.platform_data = eth_data;
+
+ platform_device_register(&dove_ge00_shared);
+ platform_device_register(&dove_ge00);
+}
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource dove_rtc_resource[] = {
+ {
+ .start = DOVE_RTC_PHYS_BASE,
+ .end = DOVE_RTC_PHYS_BASE + 32 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_RTC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+void __init dove_rtc_init(void)
+{
+ platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
+}
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource dove_sata_resources[] = {
+ {
+ .name = "sata base",
+ .start = DOVE_SATA_PHYS_BASE,
+ .end = DOVE_SATA_PHYS_BASE + 0x5000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "sata irq",
+ .start = IRQ_DOVE_SATA,
+ .end = IRQ_DOVE_SATA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_sata = {
+ .name = "sata_mv",
+ .id = 0,
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(dove_sata_resources),
+ .resource = dove_sata_resources,
+};
+
+void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
+{
+ sata_data->dram = &dove_mbus_dram_info;
+ dove_sata.dev.platform_data = sata_data;
+ platform_device_register(&dove_sata);
+}
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart0_data[] = {
+ {
+ .mapbase = DOVE_UART0_PHYS_BASE,
+ .membase = (char *)DOVE_UART0_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_0,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart0_resources[] = {
+ {
+ .start = DOVE_UART0_PHYS_BASE,
+ .end = DOVE_UART0_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_0,
+ .end = IRQ_DOVE_UART_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart0 = {
+ .name = "serial8250",
+ .id = 0,
+ .dev = {
+ .platform_data = dove_uart0_data,
+ },
+ .resource = dove_uart0_resources,
+ .num_resources = ARRAY_SIZE(dove_uart0_resources),
+};
+
+void __init dove_uart0_init(void)
+{
+ platform_device_register(&dove_uart0);
+}
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart1_data[] = {
+ {
+ .mapbase = DOVE_UART1_PHYS_BASE,
+ .membase = (char *)DOVE_UART1_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_1,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart1_resources[] = {
+ {
+ .start = DOVE_UART1_PHYS_BASE,
+ .end = DOVE_UART1_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_1,
+ .end = IRQ_DOVE_UART_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart1 = {
+ .name = "serial8250",
+ .id = 1,
+ .dev = {
+ .platform_data = dove_uart1_data,
+ },
+ .resource = dove_uart1_resources,
+ .num_resources = ARRAY_SIZE(dove_uart1_resources),
+};
+
+void __init dove_uart1_init(void)
+{
+ platform_device_register(&dove_uart1);
+}
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart2_data[] = {
+ {
+ .mapbase = DOVE_UART2_PHYS_BASE,
+ .membase = (char *)DOVE_UART2_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_2,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart2_resources[] = {
+ {
+ .start = DOVE_UART2_PHYS_BASE,
+ .end = DOVE_UART2_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_2,
+ .end = IRQ_DOVE_UART_2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart2 = {
+ .name = "serial8250",
+ .id = 2,
+ .dev = {
+ .platform_data = dove_uart2_data,
+ },
+ .resource = dove_uart2_resources,
+ .num_resources = ARRAY_SIZE(dove_uart2_resources),
+};
+
+void __init dove_uart2_init(void)
+{
+ platform_device_register(&dove_uart2);
+}
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart3_data[] = {
+ {
+ .mapbase = DOVE_UART3_PHYS_BASE,
+ .membase = (char *)DOVE_UART3_VIRT_BASE,
+ .irq = IRQ_DOVE_UART_3,
+ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = 0,
+ }, {
+ },
+};
+
+static struct resource dove_uart3_resources[] = {
+ {
+ .start = DOVE_UART3_PHYS_BASE,
+ .end = DOVE_UART3_PHYS_BASE + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_UART_3,
+ .end = IRQ_DOVE_UART_3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_uart3 = {
+ .name = "serial8250",
+ .id = 3,
+ .dev = {
+ .platform_data = dove_uart3_data,
+ },
+ .resource = dove_uart3_resources,
+ .num_resources = ARRAY_SIZE(dove_uart3_resources),
+};
+
+void __init dove_uart3_init(void)
+{
+ platform_device_register(&dove_uart3);
+}
+
+/*****************************************************************************
+ * SPI0
+ ****************************************************************************/
+static struct orion_spi_info dove_spi0_data = {
+ .tclk = 0,
+};
+
+static struct resource dove_spi0_resources[] = {
+ {
+ .start = DOVE_SPI0_PHYS_BASE,
+ .end = DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_SPI0,
+ .end = IRQ_DOVE_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_spi0 = {
+ .name = "orion_spi",
+ .id = 0,
+ .resource = dove_spi0_resources,
+ .dev = {
+ .platform_data = &dove_spi0_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_spi0_resources),
+};
+
+void __init dove_spi0_init(void)
+{
+ platform_device_register(&dove_spi0);
+}
+
+/*****************************************************************************
+ * SPI1
+ ****************************************************************************/
+static struct orion_spi_info dove_spi1_data = {
+ .tclk = 0,
+};
+
+static struct resource dove_spi1_resources[] = {
+ {
+ .start = DOVE_SPI1_PHYS_BASE,
+ .end = DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_DOVE_SPI1,
+ .end = IRQ_DOVE_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_spi1 = {
+ .name = "orion_spi",
+ .id = 1,
+ .resource = dove_spi1_resources,
+ .dev = {
+ .platform_data = &dove_spi1_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_spi1_resources),
+};
+
+void __init dove_spi1_init(void)
+{
+ platform_device_register(&dove_spi1);
+}
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata dove_i2c_data = {
+ .freq_m = 10, /* assumes 166 MHz TCLK gets 94.3kHz */
+ .freq_n = 3,
+ .timeout = 1000, /* Default timeout of 1 second */
+};
+
+static struct resource dove_i2c_resources[] = {
+ {
+ .name = "i2c base",
+ .start = DOVE_I2C_PHYS_BASE,
+ .end = DOVE_I2C_PHYS_BASE + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c irq",
+ .start = IRQ_DOVE_I2C,
+ .end = IRQ_DOVE_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dove_i2c = {
+ .name = MV64XXX_I2C_CTLR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dove_i2c_resources),
+ .resource = dove_i2c_resources,
+ .dev = {
+ .platform_data = &dove_i2c_data,
+ },
+};
+
+void __init dove_i2c_init(void)
+{
+ platform_device_register(&dove_i2c);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static int get_tclk(void)
+{
+ /* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
+ return 166666667;
+}
+
+static void dove_timer_init(void)
+{
+ orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
+}
+
+struct sys_timer dove_timer = {
+ .init = dove_timer_init,
+};
+
+/*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data dove_xor_shared_data = {
+ .dram = &dove_mbus_dram_info,
+};
+
+/*****************************************************************************
+ * XOR 0
+ ****************************************************************************/
+static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor0_shared_resources[] = {
+ {
+ .name = "xor 0 low",
+ .start = DOVE_XOR0_PHYS_BASE,
+ .end = DOVE_XOR0_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor 0 high",
+ .start = DOVE_XOR0_HIGH_PHYS_BASE,
+ .end = DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dove_xor0_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &dove_xor_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_xor0_shared_resources),
+ .resource = dove_xor0_shared_resources,
+};
+
+static struct resource dove_xor00_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_00,
+ .end = IRQ_DOVE_XOR_00,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor00_data = {
+ .shared = &dove_xor0_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor00_channel = {
+ .name = MV_XOR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dove_xor00_resources),
+ .resource = dove_xor00_resources,
+ .dev = {
+ .dma_mask = &dove_xor0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor00_data,
+ },
+};
+
+static struct resource dove_xor01_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_01,
+ .end = IRQ_DOVE_XOR_01,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor01_data = {
+ .shared = &dove_xor0_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor01_channel = {
+ .name = MV_XOR_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(dove_xor01_resources),
+ .resource = dove_xor01_resources,
+ .dev = {
+ .dma_mask = &dove_xor0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor01_data,
+ },
+};
+
+void __init dove_xor0_init(void)
+{
+ platform_device_register(&dove_xor0_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
+ platform_device_register(&dove_xor00_channel);
+
+ dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
+ platform_device_register(&dove_xor01_channel);
+}
+
+/*****************************************************************************
+ * XOR 1
+ ****************************************************************************/
+static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor1_shared_resources[] = {
+ {
+ .name = "xor 0 low",
+ .start = DOVE_XOR1_PHYS_BASE,
+ .end = DOVE_XOR1_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor 0 high",
+ .start = DOVE_XOR1_HIGH_PHYS_BASE,
+ .end = DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device dove_xor1_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 1,
+ .dev = {
+ .platform_data = &dove_xor_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(dove_xor1_shared_resources),
+ .resource = dove_xor1_shared_resources,
+};
+
+static struct resource dove_xor10_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_10,
+ .end = IRQ_DOVE_XOR_10,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor10_data = {
+ .shared = &dove_xor1_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor10_channel = {
+ .name = MV_XOR_NAME,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(dove_xor10_resources),
+ .resource = dove_xor10_resources,
+ .dev = {
+ .dma_mask = &dove_xor1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor10_data,
+ },
+};
+
+static struct resource dove_xor11_resources[] = {
+ [0] = {
+ .start = IRQ_DOVE_XOR_11,
+ .end = IRQ_DOVE_XOR_11,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data dove_xor11_data = {
+ .shared = &dove_xor1_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device dove_xor11_channel = {
+ .name = MV_XOR_NAME,
+ .id = 3,
+ .num_resources = ARRAY_SIZE(dove_xor11_resources),
+ .resource = dove_xor11_resources,
+ .dev = {
+ .dma_mask = &dove_xor1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(64),
+ .platform_data = (void *)&dove_xor11_data,
+ },
+};
+
+void __init dove_xor1_init(void)
+{
+ platform_device_register(&dove_xor1_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
+ platform_device_register(&dove_xor10_channel);
+
+ dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
+ dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
+ platform_device_register(&dove_xor11_channel);
+}
+
+void __init dove_init(void)
+{
+ int tclk;
+
+ tclk = get_tclk();
+
+ printk(KERN_INFO "Dove 88AP510 SoC, ");
+ printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init();
+#endif
+ dove_setup_cpu_mbus();
+
+ dove_ge00_shared_data.t_clk = tclk;
+ dove_uart0_data[0].uartclk = tclk;
+ dove_uart1_data[0].uartclk = tclk;
+ dove_uart2_data[0].uartclk = tclk;
+ dove_uart3_data[0].uartclk = tclk;
+ dove_spi0_data.tclk = tclk;
+ dove_spi1_data.tclk = tclk;
+
+ /* internal devices that every board has */
+ dove_rtc_init();
+ dove_xor0_init();
+ dove_xor1_init();
+}
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
new file mode 100644
index 0000000..b29e893
--- /dev/null
+++ b/arch/arm/mach-dove/common.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-dove/common.h
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_DOVE_COMMON_H
+#define __ARCH_DOVE_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+extern struct sys_timer dove_timer;
+extern struct mbus_dram_target_info dove_mbus_dram_info;
+
+/*
+ * Basic Dove init functions used early by machine-setup.
+ */
+void dove_map_io(void);
+void dove_init(void);
+void dove_init_irq(void);
+void dove_setup_cpu_mbus(void);
+void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void dove_sata_init(struct mv_sata_platform_data *sata_data);
+void dove_pcie_init(int init_port0, int init_port1);
+void dove_ehci0_init(void);
+void dove_ehci1_init(void);
+void dove_uart0_init(void);
+void dove_uart1_init(void);
+void dove_uart2_init(void);
+void dove_uart3_init(void);
+void dove_spi0_init(void);
+void dove_spi1_init(void);
+void dove_i2c_init(void);
+
+#endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
new file mode 100644
index 0000000..f2971b7
--- /dev/null
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -0,0 +1,102 @@
+/*
+ * arch/arm/mach-dove/dove-db-setup.c
+ *
+ * Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/dove.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dove_db_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data dove_db_sata_data = {
+ .n_ports = 1,
+};
+
+/*****************************************************************************
+ * SPI Devices:
+ * SPI0: 4M Flash ST-M25P32-VMF6P
+ ****************************************************************************/
+static const struct flash_platform_data dove_db_spi_flash_data = {
+ .type = "m25p64",
+};
+
+static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &dove_db_spi_flash_data,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+static int __init dove_db_pci_init(void)
+{
+ if (machine_is_dove_db())
+ dove_pcie_init(1, 1);
+
+ return 0;
+}
+
+subsys_initcall(dove_db_pci_init);
+
+/*****************************************************************************
+ * Board Init
+ ****************************************************************************/
+static void __init dove_db_init(void)
+{
+ /*
+ * Basic Dove setup. Needs to be called early.
+ */
+ dove_init();
+
+ dove_ge00_init(&dove_db_ge00_data);
+ dove_ehci0_init();
+ dove_ehci1_init();
+ dove_sata_init(&dove_db_sata_data);
+ dove_spi0_init();
+ dove_spi1_init();
+ dove_uart0_init();
+ dove_uart1_init();
+ dove_i2c_init();
+ spi_register_board_info(dove_db_spi_flash_info,
+ ARRAY_SIZE(dove_db_spi_flash_info));
+}
+
+MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
+ .phys_io = DOVE_SB_REGS_PHYS_BASE,
+ .io_pg_offst = ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = dove_db_init,
+ .map_io = dove_map_io,
+ .init_irq = dove_init_irq,
+ .timer = &dove_timer,
+MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
new file mode 100644
index 0000000..214a4c3
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-dove/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/dove.h>
+
+#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000)
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CTRL_PCIE0_LINK 0x00000001
+#define CPU_RESET 0x00000002
+#define CPU_CTRL_PCIE1_LINK 0x00000008
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define FIQ_MASK_LOW_OFF 0x0008
+#define ENDPOINT_MASK_LOW_OFF 0x000c
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define FIQ_MASK_HIGH_OFF 0x0018
+#define ENDPOINT_MASK_HIGH_OFF 0x001c
+#define PCIE_INTERRUPT_MASK_OFF 0x0020
+
+#define IRQ_MASK_LOW (IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
+#define FIQ_MASK_LOW (IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
+#define ENDPOINT_MASK_LOW (IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
+#define IRQ_MASK_HIGH (IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
+#define FIQ_MASK_HIGH (IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
+#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
+#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
+
+#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
new file mode 100644
index 0000000..9b89ec7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/bridge-regs.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =DOVE_SB_REGS_PHYS_BASE
+ ldrne \rx, =DOVE_SB_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
new file mode 100644
index 0000000..f6a0839
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-dove/include/mach/dove.h
+ *
+ * Generic definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_DOVE_H
+#define __ASM_ARCH_DOVE_H
+
+#include <mach/vmalloc.h>
+
+/*
+ * Marvell Dove address maps.
+ *
+ * phys virt size
+ * c8000000 fdb00000 1M Cryptographic SRAM
+ * e0000000 @runtime 128M PCIe-0 Memory space
+ * e8000000 @runtime 128M PCIe-1 Memory space
+ * f1000000 fde00000 8M on-chip south-bridge registers
+ * f1800000 fe600000 8M on-chip north-bridge registers
+ * f2000000 fee00000 1M PCIe-0 I/O space
+ * f2100000 fef00000 1M PCIe-1 I/O space
+ */
+
+#define DOVE_CESA_PHYS_BASE 0xc8000000
+#define DOVE_CESA_VIRT_BASE 0xfdb00000
+#define DOVE_CESA_SIZE SZ_1M
+
+#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000
+#define DOVE_PCIE0_MEM_SIZE SZ_128M
+
+#define DOVE_PCIE1_MEM_PHYS_BASE 0xe8000000
+#define DOVE_PCIE1_MEM_SIZE SZ_128M
+
+#define DOVE_BOOTROM_PHYS_BASE 0xf8000000
+#define DOVE_BOOTROM_SIZE SZ_128M
+
+#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000
+#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000
+#define DOVE_SCRATCHPAD_SIZE SZ_1M
+
+#define DOVE_SB_REGS_PHYS_BASE 0xf1000000
+#define DOVE_SB_REGS_VIRT_BASE 0xfde00000
+#define DOVE_SB_REGS_SIZE SZ_8M
+
+#define DOVE_NB_REGS_PHYS_BASE 0xf1800000
+#define DOVE_NB_REGS_VIRT_BASE 0xfe600000
+#define DOVE_NB_REGS_SIZE SZ_8M
+
+#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000
+#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000
+#define DOVE_PCIE0_IO_BUS_BASE 0x00000000
+#define DOVE_PCIE0_IO_SIZE SZ_1M
+
+#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000
+#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000
+#define DOVE_PCIE1_IO_BUS_BASE 0x00100000
+#define DOVE_PCIE1_IO_SIZE SZ_1M
+
+/*
+ * Dove Core Registers Map
+ */
+
+/* SPI, I2C, UART */
+#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000)
+#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000)
+#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000)
+#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100)
+#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100)
+#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200)
+#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200)
+#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300)
+#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300)
+#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600)
+#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600)
+
+/* North-South Bridge */
+#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+
+/* Cryptographic Engine */
+#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
+
+/* PCIe 0 */
+#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000)
+
+/* USB */
+#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000)
+#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000)
+
+/* XOR 0 Engine */
+#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800)
+#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+
+/* XOR 1 Engine */
+#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900)
+#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+
+/* Gigabit Ethernet */
+#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000)
+
+/* PCIe 1 */
+#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000)
+
+/* CAFE */
+#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000)
+#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000)
+#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000)
+
+/* SATA */
+#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+
+/* I2S/SPDIF */
+#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000)
+#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+
+/* NAND Flash Controller */
+#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+
+/* MPP, GPIO, Reset Sampling */
+#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
+#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
+#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
+#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
+#define DOVE_NAND_GPIO_EN (1 << 0)
+#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40)
+
+
+/* Power Management */
+#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+
+/* Real Time Clock */
+#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+
+/* AC97 */
+#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000)
+#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+
+/* Peripheral DMA */
+#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000)
+#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+
+#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7)
+#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20)
+#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21)
+#define DOVE_TWSI_OPTION3_GPIO (1 << 22)
+#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_ON_AU1 (1 << 0)
+#define DOVE_SSP_CLOCK_ENABLE (1 << 1)
+#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11)
+/* Memory Controller */
+#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000)
+
+/* LCD Controller */
+#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000)
+#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000)
+
+/* Graphic Engine */
+#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000)
+
+/* Video Engine */
+#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
new file mode 100644
index 0000000..e84c78c
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-dove/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Dove platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+
+ @ if no low interrupts set, check high interrupts
+ ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ moveq \irqnr, #63
+ andeqs \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
new file mode 100644
index 0000000..0ee70ff
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-dove/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#define GPIO_MAX 64
+
+#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00)
+#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20)
+
+#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+
+#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00)
+#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04)
+#define GPIO_BLINK_EN(pin) (GPIO_BASE(pin) + 0x08)
+#define GPIO_IN_POL(pin) (GPIO_BASE(pin) + 0x0c)
+#define GPIO_DATA_IN(pin) (GPIO_BASE(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin) (GPIO_BASE(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin) (GPIO_BASE(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin) (GPIO_BASE(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+ if (pin < NR_GPIO_IRQS)
+ return pin + IRQ_DOVE_GPIO_START;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+ if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
+ return irq - IRQ_DOVE_GPIO_START;
+
+ return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/hardware.h b/arch/arm/mach-dove/include/mach/hardware.h
new file mode 100644
index 0000000..32b0826
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/hardware.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-dove/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "dove.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x1000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE DOVE_PCIE0_MEM_PHYS_BASE
+
+
+/* Macros below are required for compatibility with PXA AC'97 driver. */
+#define __REG(x) (*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
+ DOVE_SB_REGS_VIRT_BASE)))
+#define __PREG(x) (((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
+ DOVE_SB_REGS_PHYS_BASE)
+#endif
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
new file mode 100644
index 0000000..3b3e472
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "dove.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
+ DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
new file mode 100644
index 0000000..4668146
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-dove/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Dove Low Interrupt Controller
+ */
+#define IRQ_DOVE_BRIDGE 0
+#define IRQ_DOVE_H2C 1
+#define IRQ_DOVE_C2H 2
+#define IRQ_DOVE_NAND 3
+#define IRQ_DOVE_PDMA 4
+#define IRQ_DOVE_SPI1 5
+#define IRQ_DOVE_SPI0 6
+#define IRQ_DOVE_UART_0 7
+#define IRQ_DOVE_UART_1 8
+#define IRQ_DOVE_UART_2 9
+#define IRQ_DOVE_UART_3 10
+#define IRQ_DOVE_I2C 11
+#define IRQ_DOVE_GPIO_0_7 12
+#define IRQ_DOVE_GPIO_8_15 13
+#define IRQ_DOVE_GPIO_16_23 14
+#define IRQ_DOVE_PCIE0_ERR 15
+#define IRQ_DOVE_PCIE0 16
+#define IRQ_DOVE_PCIE1_ERR 17
+#define IRQ_DOVE_PCIE1 18
+#define IRQ_DOVE_I2S0 19
+#define IRQ_DOVE_I2S0_ERR 20
+#define IRQ_DOVE_I2S1 21
+#define IRQ_DOVE_I2S1_ERR 22
+#define IRQ_DOVE_USB_ERR 23
+#define IRQ_DOVE_USB0 24
+#define IRQ_DOVE_USB1 25
+#define IRQ_DOVE_GE00_RX 26
+#define IRQ_DOVE_GE00_TX 27
+#define IRQ_DOVE_GE00_MISC 28
+#define IRQ_DOVE_GE00_SUM 29
+#define IRQ_DOVE_GE00_ERR 30
+#define IRQ_DOVE_CRYPTO 31
+
+/*
+ * Dove High Interrupt Controller
+ */
+#define IRQ_DOVE_AC97 32
+#define IRQ_DOVE_PMU 33
+#define IRQ_DOVE_CAM 34
+#define IRQ_DOVE_SDIO0 35
+#define IRQ_DOVE_SDIO1 36
+#define IRQ_DOVE_SDIO0_WAKEUP 37
+#define IRQ_DOVE_SDIO1_WAKEUP 38
+#define IRQ_DOVE_XOR_00 39
+#define IRQ_DOVE_XOR_01 40
+#define IRQ_DOVE_XOR0_ERR 41
+#define IRQ_DOVE_XOR_10 42
+#define IRQ_DOVE_XOR_11 43
+#define IRQ_DOVE_XOR1_ERR 44
+#define IRQ_DOVE_LCD_DCON 45
+#define IRQ_DOVE_LCD1 46
+#define IRQ_DOVE_LCD0 47
+#define IRQ_DOVE_GPU 48
+#define IRQ_DOVE_PERFORM_MNTR 49
+#define IRQ_DOVE_VPRO_DMA1 51
+#define IRQ_DOVE_SSP_TIMER 54
+#define IRQ_DOVE_SSP 55
+#define IRQ_DOVE_MC_L2_ERR 56
+#define IRQ_DOVE_CRYPTO_ERR 59
+#define IRQ_DOVE_GPIO_24_31 60
+#define IRQ_DOVE_HIGH_GPIO 61
+#define IRQ_DOVE_SATA 62
+
+/*
+ * DOVE General Purpose Pins
+ */
+#define IRQ_DOVE_GPIO_START 64
+#define NR_GPIO_IRQS 64
+
+/*
+ * PMU interrupts
+ */
+#define IRQ_DOVE_PMU_START (IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
+#define NR_PMU_IRQS 7
+#define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5)
+
+#define NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+
+/* Required for compatability with PXA AC97 driver. */
+#define IRQ_AC97 IRQ_DOVE_AC97
+/* Required for compatability with PXA DMA driver. */
+#define IRQ_DMA IRQ_DOVE_PDMA
+/* Required for compatability with PXA NAND driver */
+#define IRQ_NAND IRQ_DOVE_NAND
+#endif
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
new file mode 100644
index 0000000..d668720
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/memory.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-dove/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
new file mode 100644
index 0000000..3ad9f94
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-dove/include/mach/pm.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_PM_H
+#define __ASM_ARCH_PM_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+
+#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38)
+#define CLOCK_GATING_USB0_MASK (1 << 0)
+#define CLOCK_GATING_USB1_MASK (1 << 1)
+#define CLOCK_GATING_GBE_MASK (1 << 2)
+#define CLOCK_GATING_SATA_MASK (1 << 3)
+#define CLOCK_GATING_PCIE0_MASK (1 << 4)
+#define CLOCK_GATING_PCIE1_MASK (1 << 5)
+#define CLOCK_GATING_SDIO0_MASK (1 << 8)
+#define CLOCK_GATING_SDIO1_MASK (1 << 9)
+#define CLOCK_GATING_NAND_MASK (1 << 10)
+#define CLOCK_GATING_CAMERA_MASK (1 << 11)
+#define CLOCK_GATING_I2S0_MASK (1 << 12)
+#define CLOCK_GATING_I2S1_MASK (1 << 13)
+#define CLOCK_GATING_CRYPTO_MASK (1 << 15)
+#define CLOCK_GATING_AC97_MASK (1 << 21)
+#define CLOCK_GATING_PDMA_MASK (1 << 22)
+#define CLOCK_GATING_XOR0_MASK (1 << 23)
+#define CLOCK_GATING_XOR1_MASK (1 << 24)
+#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30)
+
+#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50)
+#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54)
+
+static inline int pmu_to_irq(int pin)
+{
+ if (pin < NR_PMU_IRQS)
+ return pin + IRQ_DOVE_PMU_START;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_pmu(int irq)
+{
+ if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+ return irq - IRQ_DOVE_PMU_START;
+
+ return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
new file mode 100644
index 0000000..356afda
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/system.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-dove/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/bridge-regs.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h
new file mode 100644
index 0000000..251d538
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-dove/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
new file mode 100644
index 0000000..2c5cdd7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/dove.h>
+
+#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
+#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
+
+#define LSR_THRE 0x20
+
+static void putc(const char c)
+{
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ /* Transmit fifo not full? */
+ if (*UART_LSR & LSR_THRE)
+ break;
+ }
+
+ *UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
new file mode 100644
index 0000000..8b2c974
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-dove/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfd800000
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
new file mode 100644
index 0000000..61bfcb3
--- /dev/null
+++ b/arch/arm/mach-dove/irq.c
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-dove/irq.c
+ *
+ * Dove IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <plat/irq.h>
+#include <asm/mach/irq.h>
+#include <mach/pm.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int irqoff;
+ BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
+
+ irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
+ 3 + irq - IRQ_DOVE_GPIO_24_31;
+
+ orion_gpio_irq_handler(irqoff << 3);
+ if (irq == IRQ_DOVE_HIGH_GPIO) {
+ orion_gpio_irq_handler(40);
+ orion_gpio_irq_handler(48);
+ orion_gpio_irq_handler(56);
+ }
+}
+
+static void pmu_irq_mask(unsigned int irq)
+{
+ int pin = irq_to_pmu(irq);
+ u32 u;
+
+ u = readl(PMU_INTERRUPT_MASK);
+ u &= ~(1 << (pin & 31));
+ writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_unmask(unsigned int irq)
+{
+ int pin = irq_to_pmu(irq);
+ u32 u;
+
+ u = readl(PMU_INTERRUPT_MASK);
+ u |= 1 << (pin & 31);
+ writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_ack(unsigned int irq)
+{
+ int pin = irq_to_pmu(irq);
+ u32 u;
+
+ u = ~(1 << (pin & 31));
+ writel(u, PMU_INTERRUPT_CAUSE);
+}
+
+static struct irq_chip pmu_irq_chip = {
+ .name = "pmu_irq",
+ .mask = pmu_irq_mask,
+ .unmask = pmu_irq_unmask,
+ .ack = pmu_irq_ack,
+};
+
+static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
+
+ cause &= readl(PMU_INTERRUPT_MASK);
+ if (cause == 0) {
+ do_bad_IRQ(irq, desc);
+ return;
+ }
+
+ for (irq = 0; irq < NR_PMU_IRQS; irq++) {
+ if (!(cause & (1 << irq)))
+ continue;
+ irq = pmu_to_irq(irq);
+ desc = irq_desc + irq;
+ desc_handle_irq(irq, desc);
+ }
+}
+
+void __init dove_init_irq(void)
+{
+ int i;
+
+ orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+ orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+
+ /*
+ * Mask and clear GPIO IRQ interrupts.
+ */
+ writel(0, GPIO_LEVEL_MASK(0));
+ writel(0, GPIO_EDGE_MASK(0));
+ writel(0, GPIO_EDGE_CAUSE(0));
+
+ /*
+ * Mask and clear PMU interrupts
+ */
+ writel(0, PMU_INTERRUPT_MASK);
+ writel(0, PMU_INTERRUPT_CAUSE);
+
+ for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
+ set_irq_chip(i, &orion_gpio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ irq_desc[i].status |= IRQ_LEVEL;
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
+ set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
+
+ for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
+ set_irq_chip(i, &pmu_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ irq_desc[i].status |= IRQ_LEVEL;
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
+}
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
new file mode 100644
index 0000000..502d1ca
--- /dev/null
+++ b/arch/arm/mach-dove/pcie.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/mach-dove/pcie.c
+ *
+ * PCIe functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <asm/delay.h>
+#include <plat/pcie.h>
+#include <mach/irqs.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+struct pcie_port {
+ u8 index;
+ u8 root_bus_nr;
+ void __iomem *base;
+ spinlock_t conf_lock;
+ char io_space_name[16];
+ char mem_space_name[16];
+ struct resource res[2];
+};
+
+static struct pcie_port pcie_port[2];
+static int num_pcie_ports;
+
+
+static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+ struct pcie_port *pp;
+
+ if (nr >= num_pcie_ports)
+ return 0;
+
+ pp = &pcie_port[nr];
+ pp->root_bus_nr = sys->busnr;
+
+ /*
+ * Generic PCIe unit setup.
+ */
+ orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+ orion_pcie_setup(pp->base, &dove_mbus_dram_info);
+
+ /*
+ * IORESOURCE_IO
+ */
+ snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+ "PCIe %d I/O", pp->index);
+ pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+ pp->res[0].name = pp->io_space_name;
+ if (pp->index == 0) {
+ pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
+ pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
+ } else {
+ pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
+ pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
+ }
+ pp->res[0].flags = IORESOURCE_IO;
+ if (request_resource(&ioport_resource, &pp->res[0]))
+ panic("Request PCIe IO resource failed\n");
+ sys->resource[0] = &pp->res[0];
+
+ /*
+ * IORESOURCE_MEM
+ */
+ snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+ "PCIe %d MEM", pp->index);
+ pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+ pp->res[1].name = pp->mem_space_name;
+ if (pp->index == 0) {
+ pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
+ pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+ } else {
+ pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
+ pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+ }
+ pp->res[1].flags = IORESOURCE_MEM;
+ if (request_resource(&iomem_resource, &pp->res[1]))
+ panic("Request PCIe Memory resource failed\n");
+ sys->resource[1] = &pp->res[1];
+
+ sys->resource[2] = NULL;
+
+ return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+ int i;
+
+ for (i = num_pcie_ports - 1; i >= 0; i--) {
+ int rbus = pcie_port[i].root_bus_nr;
+ if (rbus != -1 && rbus <= bus)
+ break;
+ }
+
+ return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+ /*
+ * Don't go out when trying to access nonexisting devices
+ * on the local bus.
+ */
+ if (bus == pp->root_bus_nr && dev > 1)
+ return 0;
+
+ return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+ int size, u32 *val)
+{
+ struct pcie_port *pp = bus_to_port(bus->number);
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+ *val = 0xffffffff;
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ spin_lock_irqsave(&pp->conf_lock, flags);
+ ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+ return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+ int where, int size, u32 val)
+{
+ struct pcie_port *pp = bus_to_port(bus->number);
+ unsigned long flags;
+ int ret;
+
+ if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ spin_lock_irqsave(&pp->conf_lock, flags);
+ ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+ spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+ return ret;
+}
+
+static struct pci_ops pcie_ops = {
+ .read = pcie_rd_conf,
+ .write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+ /*
+ * Prevent enumeration of root complex.
+ */
+ if (dev->bus->parent == NULL && dev->devfn == 0) {
+ int i;
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = 0;
+ dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ struct pci_bus *bus;
+
+ if (nr < num_pcie_ports) {
+ bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+ } else {
+ bus = NULL;
+ BUG();
+ }
+
+ return bus;
+}
+
+static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+ return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
+}
+
+static struct hw_pci dove_pci __initdata = {
+ .nr_controllers = 2,
+ .swizzle = pci_std_swizzle,
+ .setup = dove_pcie_setup,
+ .scan = dove_pcie_scan_bus,
+ .map_irq = dove_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int index, unsigned long base)
+{
+ printk(KERN_INFO "Dove PCIe port %d: ", index);
+
+ if (orion_pcie_link_up((void __iomem *)base)) {
+ struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+ printk(KERN_INFO "link up\n");
+
+ pp->index = index;
+ pp->root_bus_nr = -1;
+ pp->base = (void __iomem *)base;
+ spin_lock_init(&pp->conf_lock);
+ memset(pp->res, 0, sizeof(pp->res));
+ } else {
+ printk(KERN_INFO "link down, ignoring\n");
+ }
+}
+
+void __init dove_pcie_init(int init_port0, int init_port1)
+{
+ if (init_port0)
+ add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
+
+ if (init_port1)
+ add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
+
+ pci_common_init(&dove_pci);
+}
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b4357c3..1f0d665 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -31,6 +31,7 @@
#include <mach/hardware.h>
#include <mach/fb.h>
+#include <mach/ep93xx_keypad.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -728,6 +729,82 @@
platform_device_register(&ep93xx_fb_device);
}
+
+/*************************************************************************
+ * EP93xx matrix keypad peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_keypad_resource[] = {
+ {
+ .start = EP93XX_KEY_MATRIX_PHYS_BASE,
+ .end = EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_EP93XX_KEY,
+ .end = IRQ_EP93XX_KEY,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device ep93xx_keypad_device = {
+ .name = "ep93xx-keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_keypad_resource),
+ .resource = ep93xx_keypad_resource,
+};
+
+void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
+{
+ ep93xx_keypad_device.dev.platform_data = data;
+ platform_device_register(&ep93xx_keypad_device);
+}
+
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
+{
+ int err;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_c;
+ err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
+ if (err)
+ goto fail_gpio_d;
+ }
+
+ /* Enable the keypad controller; GPIO ports C and D used for keypad */
+ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+ EP93XX_SYSCON_DEVCFG_GONK);
+
+ return 0;
+
+fail_gpio_d:
+ gpio_free(EP93XX_GPIO_LINE_C(i));
+fail_gpio_c:
+ for ( ; i >= 0; --i) {
+ gpio_free(EP93XX_GPIO_LINE_C(i));
+ gpio_free(EP93XX_GPIO_LINE_D(i));
+ }
+ return err;
+}
+EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
+
+void ep93xx_keypad_release_gpio(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ gpio_free(EP93XX_GPIO_LINE_C(i));
+ gpio_free(EP93XX_GPIO_LINE_D(i));
+ }
+
+ /* Disable the keypad controller; GPIO ports C and D used for GPIO */
+ ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+ EP93XX_SYSCON_DEVCFG_GONK);
+}
+EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
+
+
extern void ep93xx_gpio_init(void);
void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h
index 04b37a8..50cb991 100644
--- a/arch/arm/mach-ep93xx/include/mach/clkdev.h
+++ b/arch/arm/mach-ep93xx/include/mach/clkdev.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/clkdev.h
+ */
+
#ifndef __ASM_MACH_CLKDEV_H
#define __ASM_MACH_CLKDEV_H
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index ef6bd9d..3a5961d 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
+
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index b1f937e..d55194a 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -134,6 +134,7 @@
#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
+#define EP93XX_KEY_MATRIX_PHYS_BASE EP93XX_APB_PHYS(0x000f0000)
#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 349fa7c..5a3ce02 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -1,6 +1,7 @@
/*
* arch/arm/mach-ep93xx/include/mach/hardware.h
*/
+
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index cebcc1c..594b77f 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,6 +1,7 @@
/*
* arch/arm/mach-ep93xx/include/mach/io.h
*/
+
#ifndef __ASM_MACH_IO_H
#define __ASM_MACH_IO_H
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 469fd96..c6dc14d 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -8,6 +8,7 @@
struct i2c_board_info;
struct platform_device;
struct ep93xxfb_mach_info;
+struct ep93xx_keypad_platform_data;
struct ep93xx_eth_data
{
@@ -39,6 +40,9 @@
void ep93xx_register_pwm(int pwm0, int pwm1);
int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
+void ep93xx_keypad_release_gpio(struct platform_device *pdev);
void ep93xx_init_devices(void);
extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 42ae29b..25b1da9 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -64,6 +64,8 @@
(dma_addr_t)page_to_phys(page); \
})
+#define __arch_dma_to_page(dev, addr) phys_to_page(addr)
+
#endif /* CONFIG_ARCH_IOP13XX */
#endif /* !ASSEMBLY */
diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
index d6d5252..f1c00d6 100644
--- a/arch/arm/mach-iop13xx/include/mach/time.h
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
@@ -20,7 +20,6 @@
#define IOP13XX_CORE_FREQ_1200 (5 << 16)
void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
static inline unsigned long iop13xx_core_freq(void)
{
@@ -66,6 +65,13 @@
return 2;
}
+static inline u32 read_tmr0(void)
+{
+ u32 val;
+ asm volatile("mrc p6, 0, %0, c0, c9, 0" : "=r" (val));
+ return val;
+}
+
static inline void write_tmr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
@@ -83,6 +89,11 @@
return val;
}
+static inline void write_tcr0(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c2, c9, 0" : : "r" (val));
+}
+
static inline u32 read_tcr1(void)
{
u32 val;
@@ -90,6 +101,11 @@
return val;
}
+static inline void write_tcr1(u32 val)
+{
+ asm volatile("mcr p6, 0, %0, c3, c9, 0" : : "r" (val));
+}
+
static inline void write_trr0(u32 val)
{
asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 5051c03..f91f315 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -87,7 +87,6 @@
static struct sys_timer iq81340mc_timer = {
.init = iq81340mc_timer_init,
- .offset = iop_gettimeoffset,
};
MACHINE_START(IQ81340MC, "Intel IQ81340MC")
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index bc44307..ddb7a34 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -89,7 +89,6 @@
static struct sys_timer iq81340sc_timer = {
.init = iq81340sc_timer_init,
- .offset = iop_gettimeoffset,
};
MACHINE_START(IQ81340SC, "Intel IQ81340SC")
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 3ad4696..2bef9b6 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -42,7 +42,6 @@
static struct sys_timer em7210_timer = {
.init = em7210_timer_init,
- .offset = iop_gettimeoffset,
};
/*
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index a9c2dfd..93370a4 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -47,7 +47,6 @@
static struct sys_timer glantank_timer = {
.init = glantank_timer_init,
- .offset = iop_gettimeoffset,
};
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index dd1cd99..a7a08dd 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -78,7 +78,6 @@
static struct sys_timer iq31244_timer = {
.init = iq31244_timer_init,
- .offset = iop_gettimeoffset,
};
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index fbe2779..0200f80 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -46,7 +46,6 @@
static struct sys_timer iq80321_timer = {
.init = iq80321_timer_init,
- .offset = iop_gettimeoffset,
};
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index d2e4278..2a5c637 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -53,7 +53,6 @@
static struct sys_timer n2100_timer = {
.init = n2100_timer_init,
- .offset = iop_gettimeoffset,
};
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index d51e10c..394e95a 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -48,7 +48,6 @@
static struct sys_timer iq80331_timer = {
.init = iq80331_timer_init,
- .offset = iop_gettimeoffset,
};
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 92fb44c..a40badf 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -48,7 +48,6 @@
static struct sys_timer iq80332_timer = {
.init = iq80332_timer_init,
- .offset = iop_gettimeoffset,
};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 0aca451..8bf09ae 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -33,10 +33,18 @@
Marvell SheevaPlug Reference Board.
config MACH_TS219
- bool "QNAP TS-119 and TS-219 Turbo NAS"
+ bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
help
Say 'Y' here if you want your kernel to support the
- QNAP TS-119 and TS-219 Turbo NAS devices.
+ QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
+ devices.
+
+config MACH_TS41X
+ bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
+ help
+ Say 'Y' here if you want your kernel to support the
+ QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
+ devices.
config MACH_OPENRD_BASE
bool "Marvell OpenRD Base Board"
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 80ab0ec..9f2f67b 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,7 +5,8 @@
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
-obj-$(CONFIG_MACH_TS219) += ts219-setup.o
+obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index ec1a64f..2830f0f 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -1,6 +1,6 @@
/*
*
- * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup
*
* Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
* Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
@@ -14,87 +14,17 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <linux/timex.h>
-#include <linux/serial_reg.h>
-#include <linux/pci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
-
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- * partitions on the device because we want to keep compatability with
- * the QNAP firmware.
- * Layout as used by QNAP:
- * 0x00000000-0x00080000 : "U-Boot"
- * 0x00200000-0x00400000 : "Kernel"
- * 0x00400000-0x00d00000 : "RootFS"
- * 0x00d00000-0x01000000 : "RootFS2"
- * 0x00080000-0x000c0000 : "U-Boot Config"
- * 0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-static struct mtd_partition qnap_ts219_partitions[] = {
- {
- .name = "U-Boot",
- .size = 0x00080000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .size = 0x00200000,
- .offset = 0x00200000,
- }, {
- .name = "RootFS1",
- .size = 0x00900000,
- .offset = 0x00400000,
- }, {
- .name = "RootFS2",
- .size = 0x00300000,
- .offset = 0x00d00000,
- }, {
- .name = "U-Boot Config",
- .size = 0x00040000,
- .offset = 0x00080000,
- }, {
- .name = "NAS Config",
- .size = 0x00140000,
- .offset = 0x000c0000,
- },
-};
-
-static const struct flash_platform_data qnap_ts219_flash = {
- .type = "m25p128",
- .name = "spi_flash",
- .parts = qnap_ts219_partitions,
- .nr_parts = ARRAY_SIZE(qnap_ts219_partitions),
-};
-
-static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
- {
- .modalias = "m25p80",
- .platform_data = &qnap_ts219_flash,
- .irq = -1,
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
+#include "tsx1x-common.h"
static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
I2C_BOARD_INFO("s35390a", 0x30),
@@ -152,36 +82,10 @@
MPP14_UART1_RXD, /* PIC controller */
MPP15_GPIO, /* USB Copy button */
MPP16_GPIO, /* Reset button */
+ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
0
};
-
-/*****************************************************************************
- * QNAP TS-x19 specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_ts219_power_off(void)
-{
- /* 19200 baud divisor */
- const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
- pr_info("%s: triggering power-off...\n", __func__);
-
- /* hijack UART1 and reset into sane state (19200,8n1) */
- writel(0x83, UART1_REG(LCR));
- writel(divisor & 0xff, UART1_REG(DLL));
- writel((divisor >> 8) & 0xff, UART1_REG(DLM));
- writel(0x03, UART1_REG(LCR));
- writel(0x00, UART1_REG(IER));
- writel(0x00, UART1_REG(FCR));
- writel(0x00, UART1_REG(MCR));
-
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
-}
-
static void __init qnap_ts219_init(void)
{
/*
@@ -192,9 +96,7 @@
kirkwood_uart0_init();
kirkwood_uart1_init(); /* A PIC controller is connected here. */
- spi_register_board_info(qnap_ts219_spi_slave_info,
- ARRAY_SIZE(qnap_ts219_spi_slave_info));
- kirkwood_spi_init();
+ qnap_tsx1x_register_flash();
kirkwood_i2c_init();
i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
kirkwood_ge00_init(&qnap_ts219_ge00_data);
@@ -202,7 +104,7 @@
kirkwood_ehci_init();
platform_device_register(&qnap_ts219_button_device);
- pm_power_off = qnap_ts219_power_off;
+ pm_power_off = qnap_tsx1x_power_off;
}
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
new file mode 100644
index 0000000..de49c2d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -0,0 +1,154 @@
+/*
+ *
+ * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data qnap_ts41x_sata_data = {
+ .n_ports = 2,
+};
+
+static struct gpio_keys_button qnap_ts41x_buttons[] = {
+ {
+ .code = KEY_COPY,
+ .gpio = 43,
+ .desc = "USB Copy",
+ .active_low = 1,
+ },
+ {
+ .code = KEY_RESTART,
+ .gpio = 37,
+ .desc = "Reset",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data qnap_ts41x_button_data = {
+ .buttons = qnap_ts41x_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts41x_buttons),
+};
+
+static struct platform_device qnap_ts41x_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &qnap_ts41x_button_data,
+ }
+};
+
+static unsigned int qnap_ts41x_mpp_config[] __initdata = {
+ MPP0_SPI_SCn,
+ MPP1_SPI_MOSI,
+ MPP2_SPI_SCK,
+ MPP3_SPI_MISO,
+ MPP6_SYSRST_OUTn,
+ MPP7_PEX_RST_OUTn,
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP13_UART1_TXD, /* PIC controller */
+ MPP14_UART1_RXD, /* PIC controller */
+ MPP15_SATA0_ACTn,
+ MPP16_SATA1_ACTn,
+ MPP20_GE1_0,
+ MPP21_GE1_1,
+ MPP22_GE1_2,
+ MPP23_GE1_3,
+ MPP24_GE1_4,
+ MPP25_GE1_5,
+ MPP26_GE1_6,
+ MPP27_GE1_7,
+ MPP30_GE1_10,
+ MPP31_GE1_11,
+ MPP32_GE1_12,
+ MPP33_GE1_13,
+ MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
+ MPP37_GPIO, /* Reset button */
+ MPP43_GPIO, /* USB Copy button */
+ MPP44_GPIO, /* Board ID: 0: TS-419U, 1: TS-419 */
+ MPP45_GPIO, /* JP1: 0: console, 1: LCD */
+ MPP46_GPIO, /* External SATA HDD1 error indicator */
+ MPP47_GPIO, /* External SATA HDD2 error indicator */
+ MPP48_GPIO, /* External SATA HDD3 error indicator */
+ MPP49_GPIO, /* External SATA HDD4 error indicator */
+ 0
+};
+
+static void __init qnap_ts41x_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(qnap_ts41x_mpp_config);
+
+ kirkwood_uart0_init();
+ kirkwood_uart1_init(); /* A PIC controller is connected here. */
+ qnap_tsx1x_register_flash();
+ kirkwood_i2c_init();
+ i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+ kirkwood_ge00_init(&qnap_ts41x_ge00_data);
+ kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+ kirkwood_sata_init(&qnap_ts41x_sata_data);
+ kirkwood_ehci_init();
+ platform_device_register(&qnap_ts41x_button_device);
+
+ pm_power_off = qnap_tsx1x_power_off;
+
+}
+
+static int __init ts41x_pci_init(void)
+{
+ if (machine_is_ts41x())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(ts41x_pci_init);
+
+MACHINE_START(TS41X, "QNAP TS-41x")
+ /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = qnap_ts41x_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
new file mode 100644
index 0000000..7221c20
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -0,0 +1,113 @@
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+/*
+ * QNAP TS-x1x Boards flash
+ */
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ * partitions on the device because we want to keep compatability with
+ * the QNAP firmware.
+ * Layout as used by QNAP:
+ * 0x00000000-0x00080000 : "U-Boot"
+ * 0x00200000-0x00400000 : "Kernel"
+ * 0x00400000-0x00d00000 : "RootFS"
+ * 0x00d00000-0x01000000 : "RootFS2"
+ * 0x00080000-0x000c0000 : "U-Boot Config"
+ * 0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+struct mtd_partition qnap_tsx1x_partitions[] = {
+ {
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0x00200000,
+ }, {
+ .name = "RootFS1",
+ .size = 0x00900000,
+ .offset = 0x00400000,
+ }, {
+ .name = "RootFS2",
+ .size = 0x00300000,
+ .offset = 0x00d00000,
+ }, {
+ .name = "U-Boot Config",
+ .size = 0x00040000,
+ .offset = 0x00080000,
+ }, {
+ .name = "NAS Config",
+ .size = 0x00140000,
+ .offset = 0x000c0000,
+ },
+};
+
+const struct flash_platform_data qnap_tsx1x_flash = {
+ .type = "m25p128",
+ .name = "spi_flash",
+ .parts = qnap_tsx1x_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions),
+};
+
+struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &qnap_tsx1x_flash,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+void qnap_tsx1x_register_flash(void)
+{
+ spi_register_board_info(qnap_tsx1x_spi_slave_info,
+ ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
+ kirkwood_spi_init();
+}
+
+
+/*****************************************************************************
+ * QNAP TS-x1x specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx1x_power_off(void)
+{
+ /* 19200 baud divisor */
+ const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+ pr_info("%s: triggering power-off...\n", __func__);
+
+ /* hijack UART1 and reset into sane state (19200,8n1) */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command 'A' to PIC */
+ writel('A', UART1_REG(TX));
+}
+
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
new file mode 100644
index 0000000..9a59296
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -0,0 +1,7 @@
+#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
+#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
+
+extern void qnap_tsx1x_register_flash(void);
+extern void qnap_tsx1x_power_off(void);
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 76e5308..ffa19aa 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -41,6 +41,13 @@
__dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
__dma; })
+#define __arch_dma_to_page(dev, x) \
+ ({ dma_addr_t __dma = x; \
+ if (!is_lbus_device(dev)) \
+ __dma += PHYS_OFFSET - KS8695_PCIMEM_PA; \
+ phys_to_page(__dma); \
+ })
+
#endif
#endif
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 4562452..a2d307e 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -13,6 +13,9 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -85,12 +88,48 @@
.resource = smc91x_resources,
};
+static struct mtd_partition aspenite_nand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_8M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (SZ_2M + SZ_1M),
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_48M,
+ .mask_flags = 0,
+ }
+};
+
+static struct pxa3xx_nand_platform_data aspenite_nand_info = {
+ .enable_arbiter = 1,
+ .parts = aspenite_nand_partitions,
+ .nr_parts = ARRAY_SIZE(aspenite_nand_partitions),
+};
+
static void __init common_init(void)
{
mfp_config(ARRAY_AND_SIZE(common_pin_config));
/* on-chip devices */
pxa168_add_uart(1);
+ pxa168_add_nand(&aspenite_nand_info);
/* off-chip devices */
platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index 2d9cc5a..2a46ed5 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -34,6 +34,21 @@
.disable = apbc_clk_disable,
};
+static void apmu_clk_enable(struct clk *clk)
+{
+ __raw_writel(clk->enable_val, clk->clk_rst);
+}
+
+static void apmu_clk_disable(struct clk *clk)
+{
+ __raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apmu_clk_ops = {
+ .enable = apmu_clk_enable,
+ .disable = apmu_clk_disable,
+};
+
static DEFINE_SPINLOCK(clocks_lock);
int clk_enable(struct clk *clk)
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index ed967e7..eefffbe 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -25,6 +25,7 @@
};
extern struct clkops apbc_clk_ops;
+extern struct clkops apmu_clk_ops;
#define APBC_CLK(_name, _reg, _fnclksel, _rate) \
struct clk clk_##_name = { \
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index 16295cf..d68871b 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -31,7 +31,9 @@
#define IRQ_PXA168_DDR_INT 26
#define IRQ_PXA168_UART1 27
#define IRQ_PXA168_UART2 28
+#define IRQ_PXA168_UART3 29
#define IRQ_PXA168_WDT 35
+#define IRQ_PXA168_MAIN_PMU 36
#define IRQ_PXA168_FRQ_CHANGE 38
#define IRQ_PXA168_SDH1 39
#define IRQ_PXA168_SDH2 40
@@ -46,7 +48,7 @@
#define IRQ_PXA168_USB2 51
#define IRQ_PXA168_AC97 57
#define IRQ_PXA168_TWSI1 58
-#define IRQ_PXA168_PMU 60
+#define IRQ_PXA168_AP_PMU 60
#define IRQ_PXA168_SM_INT 63
/*
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 6bf1f0e..3ad612c 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -4,6 +4,7 @@
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
@@ -13,6 +14,7 @@
extern struct pxa_device_desc pxa168_device_pwm2;
extern struct pxa_device_desc pxa168_device_pwm3;
extern struct pxa_device_desc pxa168_device_pwm4;
+extern struct pxa_device_desc pxa168_device_nand;
static inline int pxa168_add_uart(int id)
{
@@ -64,4 +66,9 @@
return pxa_register_device(d, NULL, 0);
}
+
+static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+ return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
+}
#endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 6ae1ed7..4f0b4ec 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -4,6 +4,7 @@
#include <linux/i2c.h>
#include <mach/devices.h>
#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
extern struct pxa_device_desc pxa910_device_uart1;
extern struct pxa_device_desc pxa910_device_uart2;
@@ -13,6 +14,7 @@
extern struct pxa_device_desc pxa910_device_pwm2;
extern struct pxa_device_desc pxa910_device_pwm3;
extern struct pxa_device_desc pxa910_device_pwm4;
+extern struct pxa_device_desc pxa910_device_nand;
static inline int pxa910_add_uart(int id)
{
@@ -64,4 +66,9 @@
return pxa_register_device(d, NULL, 0);
}
+
+static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+ return pxa_register_device(&pxa910_device_nand, info, sizeof(*info));
+}
#endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 71b1ae3..37dbdde 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -19,6 +19,7 @@
#include <mach/addr-map.h>
#include <mach/cputype.h>
#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <mach/dma.h>
@@ -72,6 +73,8 @@
static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -82,6 +85,7 @@
INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+ INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
};
static int __init pxa168_init(void)
@@ -127,3 +131,4 @@
PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 5882ca6..d404950 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -110,6 +110,8 @@
static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
/* device and clock bindings */
static struct clk_lookup pxa910_clkregs[] = {
INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -120,6 +122,7 @@
INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
+ INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
};
static int __init pxa910_init(void)
@@ -174,3 +177,4 @@
PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 08cfef6..8f49b2b 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -11,9 +11,13 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
#include <mach/addr-map.h>
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
@@ -26,6 +30,86 @@
/* UART2 */
GPIO47_UART2_RXD,
GPIO48_UART2_TXD,
+
+ /* DFI */
+ DF_IO0_ND_IO0,
+ DF_IO1_ND_IO1,
+ DF_IO2_ND_IO2,
+ DF_IO3_ND_IO3,
+ DF_IO4_ND_IO4,
+ DF_IO5_ND_IO5,
+ DF_IO6_ND_IO6,
+ DF_IO7_ND_IO7,
+ DF_IO8_ND_IO8,
+ DF_IO9_ND_IO9,
+ DF_IO10_ND_IO10,
+ DF_IO11_ND_IO11,
+ DF_IO12_ND_IO12,
+ DF_IO13_ND_IO13,
+ DF_IO14_ND_IO14,
+ DF_IO15_ND_IO15,
+ DF_nCS0_SM_nCS2_nCS0,
+ DF_ALE_SM_WEn_ND_ALE,
+ DF_CLE_SM_OEn_ND_CLE,
+ DF_WEn_DF_WEn,
+ DF_REn_DF_REn,
+ DF_RDY0_DF_RDY0,
+};
+
+static struct mtd_partition ttc_dkb_onenand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_8M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (SZ_2M + SZ_1M),
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_48M,
+ .mask_flags = 0,
+ }
+};
+
+static struct onenand_platform_data ttc_dkb_onenand_info = {
+ .parts = ttc_dkb_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(ttc_dkb_onenand_partitions),
+};
+
+static struct resource ttc_dkb_resource_onenand[] = {
+ [0] = {
+ .start = SMC_CS0_PHYS_BASE,
+ .end = SMC_CS0_PHYS_BASE + SZ_1M,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ttc_dkb_device_onenand = {
+ .name = "onenand-flash",
+ .id = -1,
+ .resource = ttc_dkb_resource_onenand,
+ .num_resources = ARRAY_SIZE(ttc_dkb_resource_onenand),
+ .dev = {
+ .platform_data = &ttc_dkb_onenand_info,
+ },
+};
+
+static struct platform_device *ttc_dkb_devices[] = {
+ &ttc_dkb_device_onenand,
};
static void __init ttc_dkb_init(void)
@@ -34,6 +118,9 @@
/* on-chip devices */
pxa910_add_uart(1);
+
+ /* off-chip devices */
+ platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
}
MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c8a2eac..b96c6a3 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -6,11 +6,13 @@
config MACH_MX21
bool "i.MX21 support"
+ select ARCH_MXC_AUDMUX_V1
help
This enables support for Freescale's MX2 based i.MX21 processor.
config MACH_MX27
bool "i.MX27 support"
+ select ARCH_MXC_AUDMUX_V1
help
This enables support for Freescale's MX2 based i.MX27 processor.
@@ -102,4 +104,11 @@
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
+config MACH_MXT_TD60
+ bool "Maxtrack i-MXT TD60"
+ depends on MACH_MX27
+ help
+ Include support for i-MXT (aka td60) platform. This
+ includes specific configurations for the module and its peripherals.
+
endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 19560f0..52aca0a 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -20,4 +20,5 @@
obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index eede798..91901b5 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1000,7 +1000,7 @@
clk_enable(&per_clk[0]);
clk_enable(&gpio_clk);
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
clk_enable(&uart_clk[0]);
#endif
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index ff5e332..b010bf9 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -651,8 +651,8 @@
_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
- _REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
- _REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
+ _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+ _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
_REGISTER_CLOCK(NULL, "dma", dma_clk)
@@ -751,7 +751,7 @@
clk_enable(&emi_clk);
clk_enable(&iim_clk);
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
clk_enable(&uart1_clk);
#endif
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 50199af..3d398ce 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -530,6 +530,84 @@
};
#endif
+static struct resource imx_ssi_resources0[] = {
+ {
+ .start = SSI1_BASE_ADDR,
+ .end = SSI1_BASE_ADDR + 0x6F,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_SSI1,
+ .end = MXC_INT_SSI1,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "tx0",
+ .start = DMA_REQ_SSI1_TX0,
+ .end = DMA_REQ_SSI1_TX0,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .name = "rx0",
+ .start = DMA_REQ_SSI1_RX0,
+ .end = DMA_REQ_SSI1_RX0,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .name = "tx1",
+ .start = DMA_REQ_SSI1_TX1,
+ .end = DMA_REQ_SSI1_TX1,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .name = "rx1",
+ .start = DMA_REQ_SSI1_RX1,
+ .end = DMA_REQ_SSI1_RX1,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct resource imx_ssi_resources1[] = {
+ {
+ .start = SSI2_BASE_ADDR,
+ .end = SSI2_BASE_ADDR + 0x6F,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_SSI2,
+ .end = MXC_INT_SSI2,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "tx0",
+ .start = DMA_REQ_SSI2_TX0,
+ .end = DMA_REQ_SSI2_TX0,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .name = "rx0",
+ .start = DMA_REQ_SSI2_RX0,
+ .end = DMA_REQ_SSI2_RX0,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .name = "tx1",
+ .start = DMA_REQ_SSI2_TX1,
+ .end = DMA_REQ_SSI2_TX1,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .name = "rx1",
+ .start = DMA_REQ_SSI2_RX1,
+ .end = DMA_REQ_SSI2_RX1,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device imx_ssi_device0 = {
+ .name = "imx-ssi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(imx_ssi_resources0),
+ .resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+ .name = "imx-ssi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(imx_ssi_resources1),
+ .resource = imx_ssi_resources1,
+};
+
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
{
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index d315406..97306aa 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -26,4 +26,5 @@
extern struct platform_device mxc_spi_device0;
extern struct platform_device mxc_spi_device1;
extern struct platform_device mxc_spi_device2;
-
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c
new file mode 100644
index 0000000..03dbbdc
--- /dev/null
+++ b/arch/arm/mach-mx2/mxt_td60.c
@@ -0,0 +1,319 @@
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static unsigned int mxt_td60_pins[] __initdata = {
+ /* UART0 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART1 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART2 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* UART3 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* UART4 */
+ PB18_AF_UART5_TXD,
+ PB19_AF_UART5_RXD,
+ PB20_AF_UART5_CTS,
+ PB21_AF_UART5_RTS,
+ /* UART5 */
+ PB10_AF_UART6_TXD,
+ PB12_AF_UART6_CTS,
+ PB11_AF_UART6_RXD,
+ PB13_AF_UART6_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C1 */
+ PD17_PF_I2C_DATA,
+ PD18_PF_I2C_CLK,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* FB */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA25_PF_CLS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /* OWIRE */
+ PE16_AF_OWIRE,
+ /* SDHC1*/
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ PF8_AF_ATA_IORDY,
+ /* SDHC2*/
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c_data = {
+ .bitrate = 100000,
+};
+
+/* PCA9557 */
+static int mxt_td60_pca9557_setup(struct i2c_client *client,
+ unsigned gpio_base, unsigned ngpio,
+ void *context)
+{
+ static int mxt_td60_gpio_value[] = {
+ -1, -1, -1, -1, -1, -1, -1, 1
+ };
+ int n;
+
+ for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
+ gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
+ if (mxt_td60_gpio_value[n] < 0)
+ gpio_direction_input(gpio_base + n);
+ else
+ gpio_direction_output(gpio_base + n,
+ mxt_td60_gpio_value[n]);
+ gpio_export(gpio_base + n, 0);
+ }
+
+ return 0;
+}
+
+static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
+ .gpio_base = 240, /* place PCA9557 after all MX27 gpio pins */
+ .invert = 0, /* Do not invert */
+ .setup = mxt_td60_pca9557_setup,
+};
+
+static struct i2c_board_info mxt_td60_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pca9557", 0x18),
+ .platform_data = &mxt_td60_pca9557_pdata,
+ },
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+ .bitrate = 100000,
+};
+
+static struct i2c_board_info mxt_td60_i2c2_devices[] = {
+};
+
+static struct imx_fb_videomode mxt_td60_modes[] = {
+ {
+ .mode = {
+ .name = "Chimei LW700AT9003",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 30303,
+ .hsync_len = 64,
+ .left_margin = 0x67,
+ .right_margin = 0x68,
+ .vsync_len = 16,
+ .upper_margin = 0x0f,
+ .lower_margin = 0x0f,
+ },
+ .bpp = 16,
+ .pcr = 0xFA208B83,
+ },
+};
+
+static struct imx_fb_platform_data mxt_td60_fb_data = {
+ .mode = mxt_td60_modes,
+ .num_modes = ARRAY_SIZE(mxt_td60_modes),
+
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+};
+
+static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
+ "sdhc1-card-detect", data);
+}
+
+static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOF(8), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .init = mxt_td60_sdhc1_init,
+ .exit = mxt_td60_sdhc1_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+ {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ }, {
+ .flags = IMXUART_HAVE_RTSCTS,
+ },
+};
+
+static void __init mxt_td60_board_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
+ "MXT_TD60");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+ mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+ mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+ mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+ mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+
+ i2c_register_board_info(0, mxt_td60_i2c_devices,
+ ARRAY_SIZE(mxt_td60_i2c_devices));
+
+ i2c_register_board_info(1, mxt_td60_i2c2_devices,
+ ARRAY_SIZE(mxt_td60_i2c2_devices));
+
+ mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
+ mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+ mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mxt_td60_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mxt_td60_timer = {
+ .init = mxt_td60_timer_init,
+};
+
+MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
+ /* maintainer: Maxtrack Industrial */
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mx27_init_irq,
+ .init_machine = mxt_td60_board_init,
+ .timer = &mxt_td60_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
index fe5b165..aea3d34 100644
--- a/arch/arm/mach-mx2/pca100.c
+++ b/arch/arm/mach-mx2/pca100.c
@@ -237,7 +237,7 @@
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
- .init_irq = mxc_init_irq,
+ .init_irq = mx27_init_irq,
.init_machine = pca100_init,
.timer = &pca100_timer,
MACHINE_END
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 851f245..ea8ed10 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -2,11 +2,13 @@
config ARCH_MX31
select ARCH_HAS_RNGA
+ select ARCH_MXC_AUDMUX_V2
bool
config ARCH_MX35
bool
select ARCH_MXC_IOMUX_V3
+ select ARCH_MXC_AUDMUX_V2
comment "MX3 platforms:"
@@ -61,6 +63,7 @@
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
+ select MXC_ULPI
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
@@ -100,4 +103,12 @@
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+ bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+ select ARCH_MX31
+ help
+ Include support for KZM-ARM11-01. This includes specific
+ configurations for the board and its peripherals.
+
endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 6b97754..93c7b29 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,12 +4,12 @@
# Object file lists.
-obj-y := mm.o devices.o
+obj-y := mm.o devices.o cpu.o
obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
+obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
@@ -19,3 +19,4 @@
obj-$(CONFIG_MACH_PCM043) += pcm043.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 776c0ee..54aab40 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -33,6 +33,9 @@
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -97,6 +100,47 @@
MX31_PIN_FPSHIFT__FPSHIFT,
MX31_PIN_DRDY0__DRDY0,
IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+ /* I2C2 */
+ MX31_PIN_CSPI2_MOSI__SCL,
+ MX31_PIN_CSPI2_MISO__SDA,
+};
+
+/* RTC over I2C*/
+#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
+
+static struct i2c_board_info armadillo5x0_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/* GPIO BUTTONS */
+static struct gpio_keys_button armadillo5x0_buttons[] = {
+ {
+ .code = KEY_ENTER, /*28*/
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SCLK0),
+ .active_low = 1,
+ .desc = "menu",
+ .wakeup = 1,
+ }, {
+ .code = KEY_BACK, /*158*/
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_SRST0),
+ .active_low = 1,
+ .desc = "back",
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data armadillo5x0_button_data = {
+ .buttons = armadillo5x0_buttons,
+ .nbuttons = ARRAY_SIZE(armadillo5x0_buttons),
+};
+
+static struct platform_device armadillo5x0_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &armadillo5x0_button_data,
+ }
};
/*
@@ -278,7 +322,7 @@
};
static struct smsc911x_platform_config smsc911x_info = {
- .flags = SMSC911X_USE_32BIT,
+ .flags = SMSC911X_USE_16BIT,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
};
@@ -300,6 +344,8 @@
static struct platform_device *devices[] __initdata = {
&armadillo5x0_smc911x_device,
+ &mxc_i2c_device1,
+ &armadillo5x0_button_device,
};
/*
@@ -335,6 +381,18 @@
/* set NAND page size to 2k if not configured via boot mode pins */
__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+
+ /* RTC */
+ /* Get RTC IRQ and register the chip */
+ if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
+ if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
+ armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+ else
+ gpio_free(ARMADILLO5X0_RTC_GPIO);
+ }
+ if (armadillo5x0_i2c_rtc.irq == 0)
+ pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+ i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
}
static void __init armadillo5x0_timer_init(void)
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index c595260..7584b4c 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -335,7 +335,7 @@
DEFINE_CLOCK(asrc_clk, 0, CCM_CGR0, 0, NULL, NULL);
DEFINE_CLOCK(ata_clk, 0, CCM_CGR0, 2, get_rate_ipg, NULL);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL);
+/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0, 4, NULL, NULL); */
DEFINE_CLOCK(can1_clk, 0, CCM_CGR0, 6, get_rate_ipg, NULL);
DEFINE_CLOCK(can2_clk, 1, CCM_CGR0, 8, get_rate_ipg, NULL);
DEFINE_CLOCK(cspi1_clk, 0, CCM_CGR0, 10, get_rate_ipg, NULL);
@@ -381,12 +381,43 @@
DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
DEFINE_CLOCK(wdog_clk, 0, CCM_CGR2, 24, NULL, NULL);
DEFINE_CLOCK(max_clk, 0, CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(admux_clk, 0, CCM_CGR2, 30, NULL, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL);
DEFINE_CLOCK(csi_clk, 0, CCM_CGR3, 0, get_rate_csi, NULL);
DEFINE_CLOCK(iim_clk, 0, CCM_CGR3, 2, NULL, NULL);
DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL);
+DEFINE_CLOCK(usbahb_clk, 0, 0, 0, get_rate_ahb, NULL);
+
+static int clk_dummy_enable(struct clk *clk)
+{
+ return 0;
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+ unsigned long div1;
+
+ div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1;
+
+ return get_rate_ahb(NULL) / div1;
+}
+
+/* NAND Controller: It seems it can't be disabled */
+static struct clk nfc_clk = {
+ .id = 0,
+ .enable_reg = 0,
+ .enable_shift = 0,
+ .get_rate = get_rate_nfc,
+ .set_rate = NULL, /* set_rate_nfc, */
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable
+};
+
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
@@ -397,7 +428,6 @@
static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
- _REGISTER_CLOCK(NULL, "audmux", audmux_clk)
_REGISTER_CLOCK(NULL, "can", can1_clk)
_REGISTER_CLOCK(NULL, "can", can2_clk)
_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
@@ -434,8 +464,8 @@
_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
_REGISTER_CLOCK(NULL, "spba", spba_clk)
_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
- _REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
- _REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+ _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+ _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
@@ -443,12 +473,14 @@
_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "max", max_clk)
- _REGISTER_CLOCK(NULL, "admux", admux_clk)
+ _REGISTER_CLOCK(NULL, "audmux", audmux_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
_REGISTER_CLOCK(NULL, "iim", iim_clk)
_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
};
int __init mx35_clocks_init()
@@ -456,7 +488,7 @@
int i;
unsigned int ll = 0;
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
ll = (3 << 16);
#endif
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index b2a3bcf..27a318a 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -558,8 +558,8 @@
_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
- _REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
- _REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+ _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+ _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK(NULL, "firi", firi_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
@@ -616,6 +616,8 @@
clk_enable(&serial_pll_clk);
+ mx31_read_cpu_rev();
+
if (mx31_revision() >= CHIP_REV_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
new file mode 100644
index 0000000..db82880
--- /dev/null
+++ b/arch/arm/mach-mx3/cpu.c
@@ -0,0 +1,57 @@
+/*
+ * MX3 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx31_cpu_rev;
+EXPORT_SYMBOL(mx31_cpu_rev);
+
+struct mx3_cpu_type {
+ u8 srev;
+ const char *name;
+ const char *v;
+ unsigned int rev;
+};
+
+static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
+ { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = CHIP_REV_1_0 },
+ { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = CHIP_REV_1_1 },
+ { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = CHIP_REV_1_1 },
+ { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = CHIP_REV_1_1 },
+ { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = CHIP_REV_1_1 },
+ { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = CHIP_REV_1_2 },
+ { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = CHIP_REV_1_2 },
+ { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = CHIP_REV_2_0 },
+ { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = CHIP_REV_2_0 },
+};
+
+void __init mx31_read_cpu_rev(void)
+{
+ u32 i, srev;
+
+ /* read SREV register from IIM module */
+ srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+
+ for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+ if (srev == mx31_cpu_type[i].srev) {
+ printk(KERN_INFO
+ "CPU identified as %s, silicon rev %s\n",
+ mx31_cpu_type[i].name, mx31_cpu_type[i].v);
+
+ mx31_cpu_rev = mx31_cpu_type[i].rev;
+ return;
+ }
+
+ printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+}
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index e6abe18..6adb586 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -537,6 +537,44 @@
};
#endif
+static struct resource imx_ssi_resources0[] = {
+ {
+ .start = SSI1_BASE_ADDR,
+ .end = SSI1_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MX31_INT_SSI1,
+ .end = MX31_INT_SSI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource imx_ssi_resources1[] = {
+ {
+ .start = SSI2_BASE_ADDR,
+ .end = SSI2_BASE_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = MX31_INT_SSI2,
+ .end = MX31_INT_SSI2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device imx_ssi_device0 = {
+ .name = "imx-ssi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(imx_ssi_resources0),
+ .resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+ .name = "imx-ssi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(imx_ssi_resources1),
+ .resource = imx_ssi_resources1,
+};
+
static int mx3_devices_init(void)
{
if (cpu_is_mx31()) {
@@ -546,7 +584,7 @@
}
if (cpu_is_mx35()) {
mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
- mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+ mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
otg_resources[0].start = MX35_OTG_BASE_ADDR;
otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
otg_resources[1].start = MXC_INT_USBOTG;
@@ -555,6 +593,10 @@
mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
mxc_usbh1_resources[1].start = MXC_INT_USBHS;
mxc_usbh1_resources[1].end = MXC_INT_USBHS;
+ imx_ssi_resources0[1].start = MX35_INT_SSI1;
+ imx_ssi_resources0[1].end = MX35_INT_SSI1;
+ imx_ssi_resources1[1].start = MX35_INT_SSI2;
+ imx_ssi_resources1[1].end = MX35_INT_SSI2;
}
return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ab87419..42cf175 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -23,4 +23,6 @@
extern struct platform_device mxc_spi_device0;
extern struct platform_device mxc_spi_device1;
extern struct platform_device mxc_spi_device2;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/kzmarm11.c
new file mode 100644
index 0000000..6fa99ce
--- /dev/null
+++ b/arch/arm/mach-mx3/kzmarm11.c
@@ -0,0 +1,268 @@
+/*
+ * KZM-ARM11-01 support
+ * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * based on code for MX31ADS,
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-kzmarm11.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/memory.h>
+
+#include "devices.h"
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*
+ * KZM-ARM11-01 has an external UART on FPGA
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .membase = IO_ADDRESS(KZM_ARM11_16550),
+ .mapbase = KZM_ARM11_16550,
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ .irqflags = IRQ_TYPE_EDGE_RISING,
+ .uartclk = 14745600,
+ .regshift = 0,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_BUGGY_UART,
+ },
+ {},
+};
+
+static struct resource serial8250_resources[] = {
+ {
+ .start = KZM_ARM11_16550,
+ .end = KZM_ARM11_16550 + 0x10,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(serial8250_resources),
+ .resource = serial8250_resources,
+};
+
+static int __init kzm_init_ext_uart(void)
+{
+ u8 tmp;
+
+ /*
+ * GPIO 1-1: external UART interrupt line
+ */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+ /*
+ * Unmask UART interrupt
+ */
+ tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+ tmp |= 0x2;
+ __raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+
+ return platform_device_register(&serial_device);
+}
+#else
+static inline int kzm_init_ext_uart(void)
+{
+ return 0;
+}
+#endif
+
+/*
+ * SMSC LAN9118
+ */
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct smsc911x_platform_config kzm_smsc9118_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct resource kzm_smsc9118_resources[] = {
+ {
+ .start = CS5_BASE_ADDR,
+ .end = CS5_BASE_ADDR + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device kzm_smsc9118_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kzm_smsc9118_resources),
+ .resource = kzm_smsc9118_resources,
+ .dev = {
+ .platform_data = &kzm_smsc9118_config,
+ },
+};
+
+static int __init kzm_init_smsc9118(void)
+{
+ /*
+ * GPIO 1-2: SMSC9118 interrupt line
+ */
+ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
+ return platform_device_register(&kzm_smsc9118_device);
+}
+#else
+static inline int kzm_init_smsc9118(void)
+{
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init kzm_init_imx_uart(void)
+{
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
+#else
+static inline void kzm_init_imx_uart(void)
+{
+}
+#endif
+
+static int kzm_pins[] __initdata = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ MX31_PIN_DCD_DCE1__DCD_DCE1,
+ MX31_PIN_RI_DCE1__RI_DCE1,
+ MX31_PIN_DSR_DCE1__DSR_DCE1,
+ MX31_PIN_DTR_DCE1__DTR_DCE1,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_DCD_DTE1__DCD_DTE2,
+ MX31_PIN_RI_DTE1__RI_DTE2,
+ MX31_PIN_DSR_DTE1__DSR_DTE2,
+ MX31_PIN_DTR_DTE1__DTR_DTE2,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init kzm_board_init(void)
+{
+ mxc_iomux_setup_multiple_pins(kzm_pins,
+ ARRAY_SIZE(kzm_pins), "kzm");
+ kzm_init_ext_uart();
+ kzm_init_smsc9118();
+ kzm_init_imx_uart();
+
+ pr_info("Clock input source is 26MHz\n");
+}
+
+/*
+ * This structure defines static mappings for the kzm-arm11-01 board.
+ */
+static struct map_desc kzm_io_desc[] __initdata = {
+ {
+ .virtual = CS4_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(CS4_BASE_ADDR),
+ .length = CS4_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(CS5_BASE_ADDR),
+ .length = CS5_SIZE,
+ .type = MT_DEVICE
+ },
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init kzm_map_io(void)
+{
+ mx31_map_io();
+ iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
+}
+
+static void __init kzm_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer kzm_timer = {
+ .init = kzm_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros define in arch.h in order to
+ * initialize __mach_desc_KZM_ARM11_01 data structure.
+ */
+MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = kzm_map_io,
+ .init_irq = mx31_init_irq,
+ .init_machine = kzm_board_init,
+ .timer = &kzm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 3b3a78f..7aebd74 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -109,6 +109,9 @@
static int gpio_det, gpio_wp;
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
static int mxc_mmc1_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
@@ -117,6 +120,13 @@
gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
ret = gpio_request(gpio_det, "MMC detect");
if (ret)
return ret;
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 4230251..9ce029f 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -31,6 +31,8 @@
#include <linux/interrupt.h>
#include <linux/smsc911x.h>
#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13783.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -41,6 +43,7 @@
#include <mach/common.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lilly.h>
+#include <mach/spi.h>
#include "devices.h"
@@ -108,7 +111,36 @@
static struct platform_device *devices[] __initdata = {
&smsc91x_device,
&physmap_flash_device,
- &mxc_i2c_device1,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(1),
+ MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+ .chipselect = spi_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct spi_imx_master spi1_pdata = {
+ .chipselect = spi_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+ .flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info mc13783_dev __initdata = {
+ .modalias = "mc13783",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &mc13783_pdata,
};
static int mx31lilly_baseboard;
@@ -128,8 +160,27 @@
}
mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
- mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+ /* SPI */
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
+
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
+
+ mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+ mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+ spi_register_board_info(&mc13783_dev, 1);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
new file mode 100644
index 0000000..694611d
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -0,0 +1,198 @@
+/*
+ * LogicPD i.MX31 SOM-LV development board support
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * based on code for other MX31 boards,
+ *
+ * Copyright 2005-2007 Freescale Semiconductor
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lite.h>
+#include <mach/mmc.h>
+#include <mach/spi.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
+ * If you design an own baseboard for the module, use this file as base
+ * for support code.
+ */
+
+static unsigned int litekit_db_board_pins[] __initdata = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* SPI 0 */
+ MX31_PIN_CSPI1_SCLK__SCLK,
+ MX31_PIN_CSPI1_MOSI__MOSI,
+ MX31_PIN_CSPI1_MISO__MISO,
+ MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI1_SS0__SS0,
+ MX31_PIN_CSPI1_SS1__SS1,
+ MX31_PIN_CSPI1_SS2__SS2,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC */
+
+static int gpio_det, gpio_wp;
+
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int mxc_mmc1_init(struct device *dev,
+ irq_handler_t detect_irq, void *data)
+{
+ int ret;
+
+ gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
+ gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
+
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
+ ret = gpio_request(gpio_det, "MMC detect");
+ if (ret)
+ return ret;
+
+ ret = gpio_request(gpio_wp, "MMC w/p");
+ if (ret)
+ goto exit_free_det;
+
+ gpio_direction_input(gpio_det);
+ gpio_direction_input(gpio_wp);
+
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "MMC detect", data);
+ if (ret)
+ goto exit_free_wp;
+
+ return 0;
+
+exit_free_wp:
+ gpio_free(gpio_wp);
+
+exit_free_det:
+ gpio_free(gpio_det);
+
+ return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+ gpio_free(gpio_det);
+ gpio_free(gpio_wp);
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+ .get_ro = mxc_mmc1_get_ro,
+ .init = mxc_mmc1_init,
+ .exit = mxc_mmc1_exit,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(1),
+ MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+ .chipselect = spi_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+/* GPIO LEDs */
+
+static struct gpio_led litekit_leds[] = {
+ {
+ .name = "GPIO0",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+ {
+ .name = "GPIO1",
+ .gpio = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }
+};
+
+static struct gpio_led_platform_data litekit_led_platform_data = {
+ .leds = litekit_leds,
+ .num_leds = ARRAY_SIZE(litekit_leds),
+};
+
+static struct platform_device litekit_led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &litekit_led_platform_data,
+ },
+};
+
+void __init mx31lite_db_init(void)
+{
+ mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
+ ARRAY_SIZE(litekit_db_board_pins),
+ "development board pins");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+ mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+ platform_device_register(&litekit_led_device);
+}
+
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index a8d57de..def6b67 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -2,6 +2,7 @@
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,38 +26,47 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/smsc911x.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/mtd/physmap.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <mach/common.h>
#include <asm/page.h>
#include <asm/setup.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
#include <mach/board-mx31lite.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/irqs.h>
#include <mach/mxc_nand.h>
+#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
#include "devices.h"
/*
- * This file contains the board-specific initialization routines.
+ * This file contains the module-specific initialization routines.
*/
static unsigned int mx31lite_pins[] = {
- /* UART1 */
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1,
/* LAN9117 IRQ pin */
IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
+ /* SPI 1 */
+ MX31_PIN_CSPI2_SCLK__SCLK,
+ MX31_PIN_CSPI2_MOSI__MOSI,
+ MX31_PIN_CSPI2_MISO__MISO,
+ MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI2_SS0__SS0,
+ MX31_PIN_CSPI2_SS1__SS1,
+ MX31_PIN_CSPI2_SS2__SS2,
};
static struct mxc_nand_platform_data mx31lite_nand_board_info = {
@@ -93,6 +103,111 @@
};
/*
+ * SPI
+ *
+ * The MC13783 is the only hard-wired SPI device on the module.
+ */
+
+static int spi_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+};
+
+static struct spi_imx_master spi1_pdata = {
+ .chipselect = spi_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+ .flags = MC13783_USE_RTC |
+ MC13783_USE_REGULATOR,
+};
+
+static struct spi_board_info mc13783_spi_dev __initdata = {
+ .modalias = "mc13783",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &mc13783_pdata,
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+/*
+ * USB
+ */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbh2_init(struct platform_device *pdev)
+{
+ int pins[] = {
+ MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+ MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+ MX31_PIN_USBH2_CLK__USBH2_CLK,
+ MX31_PIN_USBH2_DIR__USBH2_DIR,
+ MX31_PIN_USBH2_NXT__USBH2_NXT,
+ MX31_PIN_USBH2_STP__USBH2_STP,
+ };
+
+ mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+ mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+ /* chip select */
+ mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+ "USBH2_CS");
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+ return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .init = usbh2_init,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+/*
+ * NOR flash
+ */
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+};
+
+static struct resource nor_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .resource = &nor_flash_resource,
+ .num_resources = 1,
+};
+
+
+
+/*
* This structure defines the MX31 memory map.
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
@@ -118,19 +233,40 @@
iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
}
-/*
- * Board specific initialization.
- */
+static int mx31lite_baseboard;
+core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
+
static void __init mxc_board_init(void)
{
int ret;
+ switch (mx31lite_baseboard) {
+ case MX31LITE_NOBOARD:
+ break;
+ case MX31LITE_DB:
+ mx31lite_db_init();
+ break;
+ default:
+ printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
+ mx31lite_baseboard);
+ }
+
mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
"mx31lite");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ /* NOR and NAND flash */
+ platform_device_register(&physmap_flash_device);
mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+ mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+ spi_register_board_info(&mc13783_spi_dev, 1);
+
+ /* USB */
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
/* SMSC9117 IRQ pin */
ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
if (ret)
@@ -150,12 +286,7 @@
.init = mx31lite_timer_init,
};
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31LITE data structure.
- */
-
-MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
+MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 5592cdb..8fc624f 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -22,11 +22,15 @@
#include <linux/platform_device.h>
#include <linux/types.h>
+#include <linux/usb/otg.h>
+
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
#include "devices.h"
@@ -39,6 +43,12 @@
MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+ /* USB H1 */
+ MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+ MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+ MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+ MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+ MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
};
static struct imxuart_platform_data uart_pdata = {
@@ -98,6 +108,80 @@
.exit = devboard_sdhc2_exit,
};
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int devboard_usbh1_hw_init(struct platform_device *pdev)
+{
+ mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+ return 0;
+}
+
+#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int devboard_isp1105_init(struct otg_transceiver *otg)
+{
+ int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+ if (ret)
+ return ret;
+ /* single ended */
+ gpio_direction_output(USBH1_MODE, 0);
+
+ ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+ if (ret) {
+ gpio_free(USBH1_MODE);
+ return ret;
+ }
+ gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+ return 0;
+}
+
+
+static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+ if (on)
+ gpio_set_value(USBH1_VBUSEN_B, 0);
+ else
+ gpio_set_value(USBH1_VBUSEN_B, 1);
+
+ return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+ .init = devboard_usbh1_hw_init,
+ .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init devboard_usbh1_init(void)
+{
+ struct otg_transceiver *otg;
+
+ otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ otg->label = "ISP1105";
+ otg->init = devboard_isp1105_init;
+ otg->set_vbus = devboard_isp1105_set_vbus;
+
+ usbh1_pdata.otg = otg;
+
+ return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+}
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
@@ -111,4 +195,6 @@
mxc_register_device(&mxc_uart_device1, &uart_pdata);
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+ devboard_usbh1_init();
}
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 2bfaffb..85184a3 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,17 +16,26 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
#include <linux/platform_device.h>
#include <linux/types.h>
+#include <linux/usb/otg.h>
+
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include <media/soc_camera.h>
#include "devices.h"
@@ -37,7 +46,6 @@
MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
/* CSI */
- MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
@@ -45,10 +53,19 @@
MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+ MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
MX31_PIN_TXD2__GPIO1_28,
/* dsPIC resets */
MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
+ /*battery detection */
+ MX31_PIN_LCS0__GPIO3_23,
+ /* USB H1 */
+ MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+ MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+ MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+ MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+ MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
};
#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -120,6 +137,166 @@
}
}
+static struct spi_board_info marxbot_spi_board_info[] __initdata = {
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 300000,
+ .bus_num = 1,
+ .chip_select = 1, /* according spi1_cs[] ! */
+ },
+};
+
+#define TURRETCAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define BASECAM_POWER IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define TURRETCAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+#define BASECAM_RST_B IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
+#define CAM_CHOICE IOMUX_TO_GPIO(MX31_PIN_TXD2)
+
+static int marxbot_basecam_power(struct device *dev, int on)
+{
+ gpio_set_value(BASECAM_POWER, !on);
+ return 0;
+}
+
+static int marxbot_basecam_reset(struct device *dev)
+{
+ gpio_set_value(BASECAM_RST_B, 0);
+ udelay(100);
+ gpio_set_value(BASECAM_RST_B, 1);
+ return 0;
+}
+
+static struct i2c_board_info marxbot_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("mt9t031", 0x5d),
+ },
+};
+
+static struct soc_camera_link base_iclink = {
+ .bus_id = 0, /* Must match with the camera ID */
+ .power = marxbot_basecam_power,
+ .reset = marxbot_basecam_reset,
+ .board_info = &marxbot_i2c_devices[0],
+ .i2c_adapter_id = 0,
+ .module_name = "mt9t031",
+};
+
+static struct platform_device marxbot_camera[] = {
+ {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &base_iclink,
+ },
+ },
+};
+
+static struct platform_device *marxbot_cameras[] __initdata = {
+ &marxbot_camera[0],
+};
+
+static int __init marxbot_cam_init(void)
+{
+ int ret = gpio_request(CAM_CHOICE, "cam-choice");
+ if (ret)
+ return ret;
+ gpio_direction_output(CAM_CHOICE, 1);
+
+ ret = gpio_request(BASECAM_RST_B, "basecam-reset");
+ if (ret)
+ return ret;
+ gpio_direction_output(BASECAM_RST_B, 1);
+ ret = gpio_request(BASECAM_POWER, "basecam-standby");
+ if (ret)
+ return ret;
+ gpio_direction_output(BASECAM_POWER, 0);
+
+ ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
+ if (ret)
+ return ret;
+ gpio_direction_output(TURRETCAM_RST_B, 1);
+ ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
+ if (ret)
+ return ret;
+ gpio_direction_output(TURRETCAM_POWER, 0);
+
+ return 0;
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int marxbot_usbh1_hw_init(struct platform_device *pdev)
+{
+ mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+ return 0;
+}
+
+#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int marxbot_isp1105_init(struct otg_transceiver *otg)
+{
+ int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+ if (ret)
+ return ret;
+ /* single ended */
+ gpio_direction_output(USBH1_MODE, 0);
+
+ ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+ if (ret) {
+ gpio_free(USBH1_MODE);
+ return ret;
+ }
+ gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+ return 0;
+}
+
+
+static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+ if (on)
+ gpio_set_value(USBH1_VBUSEN_B, 0);
+ else
+ gpio_set_value(USBH1_VBUSEN_B, 1);
+
+ return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+ .init = marxbot_usbh1_hw_init,
+ .portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init marxbot_usbh1_init(void)
+{
+ struct otg_transceiver *otg;
+
+ otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ otg->label = "ISP1105";
+ otg->init = marxbot_isp1105_init;
+ otg->set_vbus = marxbot_isp1105_set_vbus;
+
+ usbh1_pdata.otg = otg;
+
+ return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+}
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
@@ -133,4 +310,17 @@
dspics_resets_init();
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+ spi_register_board_info(marxbot_spi_board_info,
+ ARRAY_SIZE(marxbot_spi_board_info));
+
+ marxbot_cam_init();
+ platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
+
+ /* battery present pin */
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+ gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
+
+ marxbot_usbh1_init();
}
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 9243de5..b705291 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -17,6 +17,7 @@
*/
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/fsl_devices.h>
#include <linux/gpio.h>
#include <linux/init.h>
@@ -26,8 +27,14 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
#include <linux/types.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -37,16 +44,20 @@
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
#include <mach/i2c.h>
#include <mach/mmc.h>
-#include <mach/mx31.h>
+#include <mach/mxc_ehci.h>
+#include <mach/mx3_camera.h>
+#include <mach/spi.h>
+#include <mach/ulpi.h>
#include "devices.h"
static unsigned int moboard_pins[] = {
/* UART0 */
- MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+ MX31_PIN_CTS1__GPIO2_7,
/* UART4 */
MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
@@ -73,12 +84,31 @@
MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
MX31_PIN_USB_OC__GPIO1_30,
+ /* USB H2 */
+ MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+ MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+ MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
+ MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
+ MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
+ MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
+ MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
+ MX31_PIN_SCK6__GPIO1_25,
/* LEDs */
MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
/* SEL */
MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+ /* SPI1 */
+ MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
+ MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
+ /* Atlas IRQ */
+ MX31_PIN_GPIO1_3__GPIO1_3,
+ /* SPI2 */
+ MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
+ MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI2_SS1__CSPI3_SS1,
};
static struct physmap_flash_data mx31moboard_flash_data = {
@@ -101,7 +131,18 @@
.num_resources = 1,
};
-static struct imxuart_platform_data uart_pdata = {
+static int moboard_uart0_init(struct platform_device *pdev)
+{
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+ gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+ return 0;
+}
+
+static struct imxuart_platform_data uart0_pdata = {
+ .init = moboard_uart0_init,
+};
+
+static struct imxuart_platform_data uart4_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
@@ -113,6 +154,103 @@
.bitrate = 100000,
};
+static int moboard_spi1_cs[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master moboard_spi1_master = {
+ .chipselect = moboard_spi1_cs,
+ .num_chipselect = ARRAY_SIZE(moboard_spi1_cs),
+};
+
+static struct regulator_consumer_supply sdhc_consumers[] = {
+ {
+ .dev = &mxcsdhc_device0.dev,
+ .supply = "sdhc0_vcc",
+ },
+ {
+ .dev = &mxcsdhc_device1.dev,
+ .supply = "sdhc1_vcc",
+ },
+};
+
+static struct regulator_init_data sdhc_vreg_data = {
+ .constraints = {
+ .min_uV = 2700000,
+ .max_uV = 3000000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
+ .consumer_supplies = sdhc_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+ {
+ .dev = &mx3_camera.dev,
+ .supply = "cam_vcc",
+ },
+};
+
+static struct regulator_init_data cam_vreg_data = {
+ .constraints = {
+ .min_uV = 2700000,
+ .max_uV = 3000000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+ .consumer_supplies = cam_consumers,
+};
+
+static struct mc13783_regulator_init_data moboard_regulators[] = {
+ {
+ .id = MC13783_REGU_VMMC1,
+ .init_data = &sdhc_vreg_data,
+ },
+ {
+ .id = MC13783_REGU_VCAM,
+ .init_data = &cam_vreg_data,
+ },
+};
+
+static struct mc13783_platform_data moboard_pmic = {
+ .regulators = moboard_regulators,
+ .num_regulators = ARRAY_SIZE(moboard_regulators),
+ .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
+ MC13783_USE_ADC,
+};
+
+static struct spi_board_info moboard_spi_board_info[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ .max_speed_hz = 300000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .platform_data = &moboard_pmic,
+ .mode = SPI_CS_HIGH,
+ },
+};
+
+static int moboard_spi2_cs[] = {
+ MXC_SPI_CS(1),
+};
+
+static struct spi_imx_master moboard_spi2_master = {
+ .chipselect = moboard_spi2_cs,
+ .num_chipselect = ARRAY_SIZE(moboard_spi2_cs),
+};
+
#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
@@ -208,6 +346,56 @@
.phy_mode = FSL_USB2_PHY_ULPI,
};
+#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int moboard_usbh2_hw_init(struct platform_device *pdev)
+{
+ int ret = gpio_request(USBH2_EN_B, "usbh2-en");
+ if (ret)
+ return ret;
+
+ mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+ gpio_direction_output(USBH2_EN_B, 0);
+
+ return 0;
+}
+
+static int moboard_usbh2_hw_exit(struct platform_device *pdev)
+{
+ gpio_free(USBH2_EN_B);
+ return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .init = moboard_usbh2_hw_init,
+ .exit = moboard_usbh2_hw_exit,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static int __init moboard_usbh2_init(void)
+{
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+}
+
+
static struct gpio_led mx31moboard_leds[] = {
{
.name = "coreboard-led-0:red:running",
@@ -266,11 +454,48 @@
}
}
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
static struct platform_device *devices[] __initdata = {
&mx31moboard_flash,
&mx31moboard_leds_device,
};
+static struct mx3_camera_pdata camera_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .flags = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+ .mclk_10khz = 4800,
+};
+
+#define CAMERA_BUF_SIZE (4*1024*1024)
+
+static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+{
+ dma_addr_t dma_handle;
+ void *buf;
+ int dma;
+
+ if (buf_size < 2 * 1024 * 1024)
+ return -EINVAL;
+
+ buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+ if (!buf) {
+ pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ memset(buf, 0, buf_size);
+
+ dma = dma_declare_coherent_memory(&mx3_camera.dev,
+ dma_handle, dma_handle, buf_size,
+ DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+ /* The way we call dma_declare_coherent_memory only a malloc can fail */
+ return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
static int mx31moboard_baseboard;
core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
@@ -284,20 +509,34 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device4, &uart_pdata);
+ mxc_register_device(&mxc_uart_device0, &uart0_pdata);
+
+ mxc_register_device(&mxc_uart_device4, &uart4_pdata);
mx31moboard_init_sel_gpios();
mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+ mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
+ mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+
+ gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+ spi_register_board_info(moboard_spi_board_info,
+ ARRAY_SIZE(moboard_spi_board_info));
+
mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
+ mxc_register_device(&mx3_camera, &camera_pdata);
+
usb_xcvr_reset();
moboard_usbotg_init();
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+ moboard_usbh2_init();
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6ff186e..0bbc65e 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/memory.h>
#include <linux/gpio.h>
+#include <linux/fsl_devices.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -69,6 +70,15 @@
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ /* USBOTG */
+ MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+ MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+};
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
/*
@@ -81,6 +91,8 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
static void __init mx35pdk_timer_init(void)
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index e18a224..e3aa829 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -43,6 +43,7 @@
#include <mach/iomux-mx35.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
#include "devices.h"
@@ -206,6 +207,11 @@
MX35_PAD_ATA_CS0__GPIO2_6,
};
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
/*
* Board specific initialization.
*/
@@ -216,6 +222,7 @@
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&mxc_uart_device1, &uart_pdata);
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 2a02b49..3c5e0f5 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -5,13 +5,13 @@
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
select NOMADIK_8815
+ select HAS_MTU
endmenu
config NOMADIK_8815
bool
-
config I2C_BITBANG_8815NHK
tristate "Driver for bit-bang busses found on the 8815 NHK"
depends on I2C && MACH_NOMADIK_8815NHK
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 4120409..36f67fb 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
# Object file lists.
-obj-y += clock.o timer.o gpio.o
+obj-y += clock.o gpio.o
# Cpu revision
obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 6bfd537..1163944 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -25,11 +25,18 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
+
+#include <plat/mtu.h>
+
#include <mach/setup.h>
#include <mach/nand.h>
#include <mach/fsmc.h>
#include "clock.h"
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK 0x00007fff
+#define SRC_CR_INIT_VAL 0x2aaa8000
+
/* These adresses span 16MB, so use three individual pages */
static struct resource nhk8815_nand_resources[] = {
{
@@ -239,6 +246,26 @@
/* will add more devices */
};
+static void __init nomadik_timer_init(void)
+{
+ u32 src_cr;
+
+ /* Configure timer sources in "system reset controller" ctrl reg */
+ src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+ src_cr &= SRC_CR_INIT_MASK;
+ src_cr |= SRC_CR_INIT_VAL;
+ writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+ /* Save global pointer to mtu, used by platform timer code */
+ mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+ nmdk_timer_init();
+}
+
+static struct sys_timer nomadik_timer = {
+ .init = nomadik_timer_init,
+};
+
static void __init nhk8815_platform_init(void)
{
int i;
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index a4e468c..b7897ed 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -15,7 +15,7 @@
extern void cpu8815_map_io(void);
extern void cpu8815_platform_init(void);
extern void cpu8815_init_irq(void);
-extern struct sys_timer nomadik_timer;
+extern void nmdk_timer_init(void);
#endif /* NOMADIK_8815 */
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index aad194f..6f1bbbc 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -100,3 +100,11 @@
config MACH_OMAP_4430SDP
bool "OMAP 4430 SDP board"
depends on ARCH_OMAP4
+
+config OMAP3_EMU
+ bool "OMAP3 debugging peripherals"
+ depends on ARCH_OMAP3
+ select OC_ETM
+ help
+ Say Y here to enable debugging hardware of omap3
+
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8cb1677..e141cab 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -44,6 +44,9 @@
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o
+# EMU peripherals
+obj-$(CONFIG_OMAP3_EMU) += emu.o
+
iommu-y += iommu2.o
iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 7c5c00d..066e88a 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -119,7 +119,7 @@
CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X),
CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
- CLK(NULL, "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
+ CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X),
CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X),
CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
@@ -138,7 +138,7 @@
CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X),
CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
- CLK(NULL, "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
+ CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2),
CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2),
CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X),
@@ -147,7 +147,7 @@
CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X),
CLK(NULL, "mpu_ck", &mpu_ck, CK_343X),
CLK(NULL, "arm_fck", &arm_fck, CK_343X),
- CLK(NULL, "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+ CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X),
CLK(NULL, "iva2_ck", &iva2_ck, CK_343X),
CLK(NULL, "l3_ick", &l3_ick, CK_343X),
@@ -302,7 +302,7 @@
CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X),
CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X),
CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X),
- CLK(NULL, "emu_src_ck", &emu_src_ck, CK_343X),
+ CLK("etb", "emu_src_ck", &emu_src_ck, CK_343X),
CLK(NULL, "pclk_fck", &pclk_fck, CK_343X),
CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X),
CLK(NULL, "atclk_fck", &atclk_fck, CK_343X),
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
new file mode 100644
index 0000000..ec0d984
--- /dev/null
+++ b/arch/arm/mach-omap2/emu.c
@@ -0,0 +1,66 @@
+/*
+ * emu.c
+ *
+ * ETM and ETB CoreSight components' resources as found in OMAP3xxx.
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shishkin");
+
+/* Cortex CoreSight components within omap3xxx EMU */
+#define ETM_BASE (L4_EMU_34XX_PHYS + 0x10000)
+#define DBG_BASE (L4_EMU_34XX_PHYS + 0x11000)
+#define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000)
+#define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000)
+
+static struct amba_device omap3_etb_device = {
+ .dev = {
+ .init_name = "etb",
+ },
+ .res = {
+ .start = ETB_BASE,
+ .end = ETB_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .periphid = 0x000bb907,
+};
+
+static struct amba_device omap3_etm_device = {
+ .dev = {
+ .init_name = "etm",
+ },
+ .res = {
+ .start = ETM_BASE,
+ .end = ETM_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .periphid = 0x102bb921,
+};
+
+static int __init emu_init(void)
+{
+ amba_device_register(&omap3_etb_device, &iomem_resource);
+ amba_device_register(&omap3_etm_device, &iomem_resource);
+
+ return 0;
+}
+
+subsys_initcall(emu_init);
+
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a6f8eab..d89c6ad 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -2,34 +2,105 @@
menu "Intel PXA2xx/PXA3xx Implementations"
-if PXA3xx
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
-menu "Supported PXA3xx Processor Variants"
+config ARCH_LUBBOCK
+ bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+ select PXA25x
+ select SA1111
+ select PXA_HAVE_BOARD_IRQS
-config CPU_PXA300
- bool "PXA300 (codename Monahans-L)"
+config MACH_MAINSTONE
+ bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+ select PXA27x
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
-config CPU_PXA310
- bool "PXA310 (codename Monahans-LV)"
+config MACH_ZYLONITE
+ bool
+ select PXA3xx
+ select PXA_SSP
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_ZYLONITE300
+ bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
select CPU_PXA300
+ select CPU_PXA310
+ select MACH_ZYLONITE
-config CPU_PXA320
- bool "PXA320 (codename Monahans-P)"
+config MACH_ZYLONITE320
+ bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+ select CPU_PXA320
+ select MACH_ZYLONITE
-config CPU_PXA930
- bool "PXA930 (codename Tavor-P)"
+config MACH_LITTLETON
+ bool "PXA3xx Form Factor Platform (aka Littleton)"
+ select PXA3xx
+ select PXA_SSP
-config CPU_PXA935
- bool "PXA935 (codename Tavor-P65)"
+config MACH_TAVOREVB
+ bool "PXA930 Evaluation Board (aka TavorEVB)"
+ select PXA3xx
select CPU_PXA930
-config CPU_PXA950
- bool "PXA950 (codename Tavor-PV2)"
+config MACH_SAAR
+ bool "PXA930 Handheld Platform (aka SAAR)"
+ select PXA3xx
select CPU_PXA930
-endmenu
+comment "Third Party Dev Platforms (sorted by vendor name)"
-endif
+config ARCH_PXA_IDP
+ bool "Accelent Xscale IDP"
+ select PXA25x
+
+config ARCH_VIPER
+ bool "Arcom/Eurotech VIPER SBC"
+ select PXA25x
+ select ISA
+ select I2C_GPIO
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+ select PXA_HAVE_ISA_IRQS
+
+config MACH_BALLOON3
+ bool "Balloon 3 board"
+ select PXA27x
+ select IWMMXT
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_CSB726
+ bool "Enable Cogent CSB726 System On a Module"
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Cogent
+ CSB726 System On Module.
+
+config CSB726_CSB701
+ bool "Enable support for CSB701 baseboard"
+ depends on MACH_CSB726
+
+config MACH_ARMCORE
+ bool "CompuLab CM-X255/CM-X270 modules"
+ select PXA27x
+ select IWMMXT
+ select PXA25x
+ select PXA_SSP
+
+config MACH_EM_X270
+ bool "CompuLab EM-x270 platform"
+ select PXA27x
+
+config MACH_EXEDA
+ bool "CompuLab eXeda platform"
+ select PXA27x
+
+config MACH_CM_X300
+ bool "CompuLab CM-X300 modules"
+ select PXA3xx
+ select CPU_PXA300
config ARCH_GUMSTIX
bool "Gumstix XScale 255 boards"
@@ -62,11 +133,56 @@
select IWMMXT
select PXA_HAVE_BOARD_IRQS
-config ARCH_LUBBOCK
- bool "Intel DBPXA250 Development Platform"
+config MACH_XCEP
+ bool "Iskratel Electronics XCEP"
select PXA25x
- select SA1111
- select PXA_HAVE_BOARD_IRQS
+ select MTD
+ select MTD_PARTITIONS
+ select MTD_PHYSMAP
+ select MTD_CFI_INTELEXT
+ select MTD_CFI
+ select MTD_CHAR
+ select SMC91X
+ select PXA_SSP
+ help
+ PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+ Tuned for usage in Libera instruments for particle accelerators.
+
+config TRIZEPS_PXA
+ bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
+config MACH_TRIZEPS4
+ bool "Keith und Koep Trizeps4 DIMM-Module"
+ depends on TRIZEPS_PXA
+ select TRIZEPS_PCMCIA
+ select PXA27x
+
+config MACH_TRIZEPS4WL
+ bool "Keith und Koep Trizeps4-WL DIMM-Module"
+ depends on TRIZEPS_PXA
+ select TRIZEPS_PCMCIA
+ select PXA27x
+ select PXA_SSP
+
+choice
+ prompt "Select base board for Trizeps module"
+ depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
+ bool "ConXS Eval Board"
+
+config MACH_TRIZEPS_UCONXS
+ bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+ bool "another Board"
+
+endchoice
+
+config TRIZEPS_PCMCIA
+ bool
+ help
+ Enable PCMCIA support for Trizeps modules
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
@@ -74,25 +190,215 @@
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
-config MACH_MAINSTONE
- bool "Intel HCDDBBVA0 Development Platform"
+config MACH_PCM027
+ bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
+ select IWMMXT
+ select PXA_SSP
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_PCM990_BASEBOARD
+ bool "PHYTEC PCM-990 development board"
+ select HAVE_PWM
+ depends on MACH_PCM027
+
+choice
+ prompt "display on pcm990"
+ depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+ bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+ bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+ bool "no display"
+
+endchoice
+
+config MACH_COLIBRI
+ bool "Toradex Colibri PXA270"
+ select PXA27x
+
+config MACH_COLIBRI300
+ bool "Toradex Colibri PXA300/310"
+ select PXA3xx
+ select CPU_PXA300
+ select CPU_PXA310
+ select HAVE_PWM
+
+config MACH_COLIBRI320
+ bool "Toradex Colibri PXA320"
+ select PXA3xx
+ select CPU_PXA320
+
+comment "End-user Products (sorted by vendor name)"
+
+config MACH_H4700
+ bool "HP iPAQ hx4700"
+ select PXA27x
+ select IWMMXT
+ select PXA_SSP
select HAVE_PWM
select PXA_HAVE_BOARD_IRQS
+config MACH_H5000
+ bool "HP iPAQ h5000"
+ select PXA25x
+
+config MACH_HIMALAYA
+ bool "HTC Himalaya Support"
+ select CPU_PXA26x
+ select FB_W100
+
+config MACH_MAGICIAN
+ bool "Enable HTC Magician Support"
+ select PXA27x
+ select IWMMXT
+ select PXA_SSP
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_MIOA701
+ bool "Mitac Mio A701 Support"
+ select PXA27x
+ select IWMMXT
+ select HAVE_PWM
+ select GPIO_SYSFS
+ help
+ Say Y here if you intend to run this kernel on a
+ MIO A701. Currently there is only basic support
+ for this PDA.
+
+config PXA_EZX
+ bool "Motorola EZX Platform"
+ select PXA27x
+ select IWMMXT
+ select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
+
+config MACH_EZX_A780
+ bool "Motorola EZX A780"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E680
+ bool "Motorola EZX E680"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_A1200
+ bool "Motorola EZX A1200"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_A910
+ bool "Motorola EZX A910"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E6
+ bool "Motorola EZX E6"
+ default y
+ depends on PXA_EZX
+
+config MACH_EZX_E2
+ bool "Motorola EZX E2"
+ default y
+ depends on PXA_EZX
+
config MACH_MP900C
bool "Nec Mobilepro 900/c"
select PXA25x
-config MACH_BALLOON3
- bool "Balloon 3 board"
+config ARCH_PXA_PALM
+ bool "PXA based Palm PDAs"
+ select HAVE_PWM
+
+config MACH_PALMTE2
+ bool "Palm Tungsten|E2"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+ handheld computer.
+
+config MACH_PALMTC
+ bool "Palm Tungsten|C"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|C
+ handheld computer.
+
+config MACH_PALMT5
+ bool "Palm Tungsten|T5"
+ default y
+ depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
- select PXA_HAVE_BOARD_IRQS
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+ handheld computer.
-config ARCH_PXA_IDP
- bool "Accelent Xscale IDP"
- select PXA25x
+config MACH_PALMTX
+ bool "Palm T|X"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm T|X
+ handheld computer.
+
+config MACH_PALMZ72
+ bool "Palm Zire 72"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on Palm Zire 72
+ handheld computer.
+
+config MACH_PALMLD
+ bool "Palm LifeDrive"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ help
+ Say Y here if you intend to run this kernel on a Palm LifeDrive
+ handheld computer.
+
+config PALM_TREO
+ bool
+ depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+ bool "Palm Centro 685 (GSM)"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ select PALM_TREO
+ help
+ Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
+ smartphone.
+
+config MACH_TREO680
+ bool "Palm Treo 680"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA27x
+ select IWMMXT
+ select PALM_TREO
+ help
+ Say Y here if you intend to run this kernel on Palm Treo 680
+ smartphone.
config PXA_SHARPSL
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
@@ -169,15 +475,6 @@
select PXA25x
select PXA_HAVE_BOARD_IRQS
-config ARCH_VIPER
- bool "Arcom/Eurotech VIPER SBC"
- select PXA25x
- select ISA
- select I2C_GPIO
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
- select PXA_HAVE_ISA_IRQS
-
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
@@ -234,297 +531,6 @@
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
-config TRIZEPS_PXA
- bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-
-config MACH_H5000
- bool "HP iPAQ h5000"
- select PXA25x
-
-config MACH_TRIZEPS4
- bool "Keith und Koep Trizeps4 DIMM-Module"
- depends on TRIZEPS_PXA
- select TRIZEPS_PCMCIA
- select PXA27x
-
-config MACH_TRIZEPS4WL
- bool "Keith und Koep Trizeps4-WL DIMM-Module"
- depends on TRIZEPS_PXA
- select TRIZEPS_PCMCIA
- select PXA27x
- select PXA_SSP
-
-choice
- prompt "Select base board for Trizeps module"
- depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
- bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
- bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
- bool "another Board"
-
-endchoice
-
-config TRIZEPS_PCMCIA
- bool
- help
- Enable PCMCIA support for Trizeps modules
-
-config MACH_EM_X270
- bool "CompuLab EM-x270 platform"
- select PXA27x
-
-config MACH_EXEDA
- bool "CompuLab eXeda platform"
- select PXA27x
-
-config MACH_COLIBRI
- bool "Toradex Colibri PXA270"
- select PXA27x
-
-config MACH_COLIBRI300
- bool "Toradex Colibri PXA300/310"
- select PXA3xx
- select CPU_PXA300
-
-config MACH_COLIBRI320
- bool "Toradex Colibri PXA320"
- select PXA3xx
- select CPU_PXA320
-
-config MACH_ZYLONITE
- bool "PXA3xx Development Platform (aka Zylonite)"
- select PXA3xx
- select PXA_SSP
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_LITTLETON
- bool "PXA3xx Form Factor Platform (aka Littleton)"
- select PXA3xx
- select PXA_SSP
-
-config MACH_TAVOREVB
- bool "PXA930 Evaluation Board (aka TavorEVB)"
- select PXA3xx
- select CPU_PXA930
-
-config MACH_SAAR
- bool "PXA930 Handheld Platform (aka SAAR)"
- select PXA3xx
- select CPU_PXA930
-
-config MACH_ARMCORE
- bool "CompuLab CM-X255/CM-X270 modules"
- select PXA27x
- select IWMMXT
- select PXA25x
- select PXA_SSP
-
-config MACH_CM_X300
- bool "CompuLab CM-X300 modules"
- select PXA3xx
- select CPU_PXA300
-
-config MACH_H4700
- bool "HP iPAQ hx4700"
- select PXA27x
- select IWMMXT
- select PXA_SSP
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_MAGICIAN
- bool "Enable HTC Magician Support"
- select PXA27x
- select IWMMXT
- select PXA_SSP
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_HIMALAYA
- bool "HTC Himalaya Support"
- select CPU_PXA26x
- select FB_W100
-
-config MACH_MIOA701
- bool "Mitac Mio A701 Support"
- select PXA27x
- select IWMMXT
- select HAVE_PWM
- select GPIO_SYSFS
- help
- Say Y here if you intend to run this kernel on a
- MIO A701. Currently there is only basic support
- for this PDA.
-
-config MACH_PCM027
- bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
- select PXA27x
- select IWMMXT
- select PXA_SSP
- select PXA_HAVE_BOARD_IRQS
-
-config ARCH_PXA_PALM
- bool "PXA based Palm PDAs"
- select HAVE_PWM
-
-config MACH_PALMTE2
- bool "Palm Tungsten|E2"
- default y
- depends on ARCH_PXA_PALM
- select PXA25x
- help
- Say Y here if you intend to run this kernel on a Palm Tungsten|E2
- handheld computer.
-
-config MACH_PALMTC
- bool "Palm Tungsten|C"
- default y
- depends on ARCH_PXA_PALM
- select PXA25x
- help
- Say Y here if you intend to run this kernel on a Palm Tungsten|C
- handheld computer.
-
-config MACH_PALMT5
- bool "Palm Tungsten|T5"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on a Palm Tungsten|T5
- handheld computer.
-
-config MACH_PALMTX
- bool "Palm T|X"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on a Palm T|X
- handheld computer.
-
-config MACH_PALMZ72
- bool "Palm Zire 72"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on Palm Zire 72
- handheld computer.
-
-config MACH_TREO680
- bool "Palm Treo 680"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on Palm Treo 680
- smartphone.
-
-config MACH_PALMLD
- bool "Palm LifeDrive"
- default y
- depends on ARCH_PXA_PALM
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on a Palm LifeDrive
- handheld computer.
-
-config MACH_PCM990_BASEBOARD
- bool "PHYTEC PCM-990 development board"
- select HAVE_PWM
- depends on MACH_PCM027
-
-choice
- prompt "display on pcm990"
- depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
- bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
- bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
- bool "no display"
-
-endchoice
-
-config MACH_CSB726
- bool "Enable Cogent CSB726 System On a Module"
- select PXA27x
- select IWMMXT
- help
- Say Y here if you intend to run this kernel on a Cogent
- CSB726 System On Module.
-
-config CSB726_CSB701
- bool "Enable supprot for CSB701 baseboard"
- depends on MACH_CSB726
-
-config PXA_EZX
- bool "Motorola EZX Platform"
- select PXA27x
- select IWMMXT
- select HAVE_PWM
- select PXA_HAVE_BOARD_IRQS
-
-config MACH_EZX_A780
- bool "Motorola EZX A780"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_E680
- bool "Motorola EZX E680"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_A1200
- bool "Motorola EZX A1200"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_A910
- bool "Motorola EZX A910"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_E6
- bool "Motorola EZX E6"
- default y
- depends on PXA_EZX
-
-config MACH_EZX_E2
- bool "Motorola EZX E2"
- default y
- depends on PXA_EZX
-
-config MACH_XCEP
- bool "Iskratel Electronics XCEP"
- select PXA25x
- select MTD
- select MTD_PARTITIONS
- select MTD_PHYSMAP
- select MTD_CFI_INTELEXT
- select MTD_CFI
- select MTD_CHAR
- select SMC91X
- select PXA_SSP
- help
- PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
- Tuned for usage in Libera instruments for particle accelerators.
-
endmenu
config PXA25x
@@ -551,6 +557,42 @@
help
Select code specific to PXA3xx variants
+config CPU_PXA300
+ bool
+ select PXA3xx
+ help
+ PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+ bool
+ select CPU_PXA300
+ help
+ PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+ bool
+ select PXA3xx
+ help
+ PXA320 (codename Monahans-P)
+
+config CPU_PXA930
+ bool
+ select PXA3xx
+ help
+ PXA930 (codename Tavor-P)
+
+config CPU_PXA935
+ bool
+ select CPU_PXA930
+ help
+ PXA935 (codename Tavor-P65)
+
+config CPU_PXA950
+ bool
+ select CPU_PXA930
+ help
+ PXA950 (codename Tavor-PV2)
+
config PXA_SHARP_C7xx
bool
select PXA_SSP
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f10e152..b5d29e6 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -24,33 +24,63 @@
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
-# Specific board support
+# NOTE: keep the order of boards in accordance to their order in Kconfig
+
+# Intel/Marvell Dev Platforms
+obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
+obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
+obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o
+obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
+obj-$(CONFIG_MACH_LITTLETON) += littleton.o
+obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
+obj-$(CONFIG_MACH_SAAR) += saar.o
+
+# 3rd Party Dev Platforms
+obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
+obj-$(CONFIG_ARCH_VIPER) += viper.o
+obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
+obj-$(CONFIG_MACH_CSB726) += csb726.o
+obj-$(CONFIG_CSB726_CSB701) += csb701.o
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
+endif
+obj-$(CONFIG_MACH_EM_X270) += em-x270.o
+obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o
obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o
-obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
-obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
-obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
-obj-$(CONFIG_MACH_MP900C) += mp900.o
-obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
+obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
+obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
+obj-$(CONFIG_MACH_XCEP) += xcep.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
+obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
+obj-$(CONFIG_MACH_PCM027) += pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o
obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o
obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o
+
+# End-user Products
+obj-$(CONFIG_MACH_H4700) += hx4700.o
obj-$(CONFIG_MACH_H5000) += h5000.o
+obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
+obj-$(CONFIG_MACH_MAGICIAN) += magician.o
+obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_PXA_EZX) += ezx.o
+obj-$(CONFIG_MACH_MP900C) += mp900.o
+obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
+obj-$(CONFIG_MACH_PALMTC) += palmtc.o
+obj-$(CONFIG_MACH_PALMT5) += palmt5.o
+obj-$(CONFIG_MACH_PALMTX) += palmtx.o
+obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
+obj-$(CONFIG_MACH_PALMLD) += palmld.o
+obj-$(CONFIG_PALM_TREO) += palmtreo.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
-obj-$(CONFIG_MACH_PCM027) += pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
-obj-$(CONFIG_MACH_EM_X270) += em-x270.o
-obj-$(CONFIG_MACH_H4700) += hx4700.o
-obj-$(CONFIG_MACH_MAGICIAN) += magician.o
-obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o
-obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_MACH_E330) += e330.o
obj-$(CONFIG_MACH_E350) += e350.o
@@ -58,34 +88,6 @@
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
-obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
-obj-$(CONFIG_MACH_PALMTC) += palmtc.o
-obj-$(CONFIG_MACH_PALMT5) += palmt5.o
-obj-$(CONFIG_MACH_PALMTX) += palmtx.o
-obj-$(CONFIG_MACH_PALMLD) += palmld.o
-obj-$(CONFIG_MACH_PALMZ72) += palmz72.o
-obj-$(CONFIG_MACH_TREO680) += treo680.o
-obj-$(CONFIG_ARCH_VIPER) += viper.o
-
-ifeq ($(CONFIG_MACH_ZYLONITE),y)
- obj-y += zylonite.o
- obj-$(CONFIG_CPU_PXA300) += zylonite_pxa300.o
- obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
-endif
-obj-$(CONFIG_MACH_LITTLETON) += littleton.o
-obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
-obj-$(CONFIG_MACH_SAAR) += saar.o
-
-obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o
-obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
-obj-$(CONFIG_PXA_EZX) += ezx.o
-
-obj-$(CONFIG_MACH_XCEP) += xcep.o
-
-obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
-obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
-obj-$(CONFIG_MACH_CSB726) += csb726.o
-obj-$(CONFIG_CSB726_CSB701) += csb701.o
# Support for blinky lights
led-y := leds.o
@@ -95,8 +97,4 @@
obj-$(CONFIG_LEDS) += $(led-y)
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
-endif
-
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f23138b..b8cd07c 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -306,6 +306,10 @@
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
if (balloon3_has(BALLOON3_FEATURE_AUDIO))
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b50ef39..bff6e78 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -453,6 +453,10 @@
static void __init cmx2xx_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
cmx2xx_pm_init();
if (cpu_is_pxa25x())
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 102916f..d37cfa1 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -3,9 +3,10 @@
*
* Support for the CompuLab CM-X300 modules
*
- * Copyright (C) 2008 CompuLab Ltd.
+ * Copyright (C) 2008,2009 CompuLab Ltd.
*
* Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -16,30 +17,41 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/leds.h>
#include <linux/rtc-v3020.h>
+#include <linux/pwm_backlight.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
+#include <linux/mfd/da903x.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/tdo24m.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
#include <mach/pxa300.h>
+#include <mach/pxa27x-udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <plat/i2c.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
+#include <mach/audio.h>
#include <asm/mach/map.h>
#include "generic.h"
+#include "devices.h"
#define CM_X300_ETH_PHYS 0x08000010
@@ -53,7 +65,7 @@
#define GPIO97_RTC_RD (97)
#define GPIO98_RTC_IO (98)
-static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
/* LCD */
GPIO54_LCD_LDD_0,
GPIO55_LCD_LDD_1,
@@ -137,7 +149,6 @@
GPIO36_UART1_DTR,
/* GPIOs */
- GPIO79_GPIO, /* LED */
GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
GPIO85_GPIO, /* MMC WP */
GPIO99_GPIO, /* Ethernet IRQ */
@@ -151,6 +162,50 @@
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
+
+ /* PWM Backlight */
+ GPIO19_PWM2_OUT,
+};
+
+static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
+ /* GPIOs */
+ GPIO79_GPIO, /* LED */
+ GPIO77_GPIO, /* WiFi reset */
+ GPIO78_GPIO, /* BT reset */
+};
+
+static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
+ /* GPIOs */
+ GPIO76_GPIO, /* LED */
+ GPIO71_GPIO, /* WiFi reset */
+ GPIO70_GPIO, /* BT reset */
+};
+
+static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
+ /* USB PORT 2 */
+ ULPI_STP,
+ ULPI_NXT,
+ ULPI_DIR,
+ GPIO30_ULPI_DATA_OUT_0,
+ GPIO31_ULPI_DATA_OUT_1,
+ GPIO32_ULPI_DATA_OUT_2,
+ GPIO33_ULPI_DATA_OUT_3,
+ GPIO34_ULPI_DATA_OUT_4,
+ GPIO35_ULPI_DATA_OUT_5,
+ GPIO36_ULPI_DATA_OUT_6,
+ GPIO37_ULPI_DATA_OUT_7,
+ GPIO38_ULPI_CLK,
+ /* external PHY reset pin */
+ GPIO127_GPIO,
+
+ /* USB PORT 3 */
+ GPIO77_USB_P3_1,
+ GPIO78_USB_P3_2,
+ GPIO79_USB_P3_3,
+ GPIO80_USB_P3_4,
+ GPIO81_USB_P3_5,
+ GPIO82_USB_P3_6,
+ GPIO0_2_USBH_PEN,
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
@@ -195,17 +250,18 @@
static inline void cm_x300_init_dm9000(void) {}
#endif
+/* LCD */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info cm_x300_lcd_modes[] = {
[0] = {
- .pixclock = 38000,
+ .pixclock = 38250,
.bpp = 16,
.xres = 480,
.yres = 640,
.hsync_len = 8,
.vsync_len = 2,
.left_margin = 8,
- .upper_margin = 0,
+ .upper_margin = 2,
.right_margin = 24,
.lower_margin = 4,
.cmap_greyscale = 0,
@@ -227,7 +283,7 @@
static struct pxafb_mach_info cm_x300_lcd = {
.modes = cm_x300_lcd_modes,
- .num_modes = 2,
+ .num_modes = ARRAY_SIZE(cm_x300_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
@@ -239,6 +295,87 @@
static inline void cm_x300_init_lcd(void) {}
#endif
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct platform_pwm_backlight_data cm_x300_backlight_data = {
+ .pwm_id = 2,
+ .max_brightness = 100,
+ .dft_brightness = 100,
+ .pwm_period_ns = 10000,
+};
+
+static struct platform_device cm_x300_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &cm_x300_backlight_data,
+ },
+};
+
+static void cm_x300_init_bl(void)
+{
+ platform_device_register(&cm_x300_backlight_device);
+}
+#else
+static inline void cm_x300_init_bl(void) {}
+#endif
+
+#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
+#define GPIO_LCD_BASE (144)
+#define GPIO_LCD_DIN (GPIO_LCD_BASE + 8) /* aux_gpio3_0 */
+#define GPIO_LCD_DOUT (GPIO_LCD_BASE + 9) /* aux_gpio3_1 */
+#define GPIO_LCD_SCL (GPIO_LCD_BASE + 10) /* aux_gpio3_2 */
+#define GPIO_LCD_CS (GPIO_LCD_BASE + 11) /* aux_gpio3_3 */
+#define LCD_SPI_BUS_NUM (1)
+
+static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
+ .sck = GPIO_LCD_SCL,
+ .mosi = GPIO_LCD_DIN,
+ .miso = GPIO_LCD_DOUT,
+ .num_chipselect = 1,
+};
+
+static struct platform_device cm_x300_spi_gpio = {
+ .name = "spi_gpio",
+ .id = LCD_SPI_BUS_NUM,
+ .dev = {
+ .platform_data = &cm_x300_spi_gpio_pdata,
+ },
+};
+
+static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
+ .model = TDO35S,
+};
+
+static struct spi_board_info cm_x300_spi_devices[] __initdata = {
+ {
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = LCD_SPI_BUS_NUM,
+ .chip_select = 0,
+ .controller_data = (void *) GPIO_LCD_CS,
+ .platform_data = &cm_x300_tdo24m_pdata,
+ },
+};
+
+static void __init cm_x300_init_spi(void)
+{
+ spi_register_board_info(cm_x300_spi_devices,
+ ARRAY_SIZE(cm_x300_spi_devices));
+ platform_device_register(&cm_x300_spi_gpio);
+}
+#else
+static inline void cm_x300_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static void __init cm_x300_init_ac97(void)
+{
+ pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cm_x300_init_ac97(void) {}
+#endif
+
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
static struct mtd_partition cm_x300_nand_partitions[] = {
[0] = {
@@ -333,9 +470,19 @@
#endif
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int cm_x300_ohci_init(struct device *dev)
+{
+ if (cpu_is_pxa300())
+ UP2OCR = UP2OCR_HXS
+ | UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+ return 0;
+}
+
static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW,
+ .init = cm_x300_ohci_init,
};
static void __init cm_x300_init_ohci(void)
@@ -351,7 +498,6 @@
[0] = {
.name = "cm-x300:green",
.default_trigger = "heartbeat",
- .gpio = 79,
.active_low = 1,
},
};
@@ -371,6 +517,11 @@
static void __init cm_x300_init_leds(void)
{
+ if (system_rev < 130)
+ cm_x300_leds[0].gpio = 79;
+ else
+ cm_x300_leds[0].gpio = 76;
+
platform_device_register(&cm_x300_led_device);
}
#else
@@ -433,11 +584,94 @@
static inline void cm_x300_init_rtc(void) {}
#endif
-static void __init cm_x300_init(void)
+/* DA9030 */
+struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
+ {
+ .name = "da903x-backlight",
+ .id = DA9030_ID_WLED,
+ }
+};
+
+static struct da903x_platform_data cm_x300_da9030_info = {
+ .num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
+ .subdevs = cm_x300_da9030_subdevs,
+};
+
+static struct i2c_board_info cm_x300_pmic_info = {
+ I2C_BOARD_INFO("da9030", 0x49),
+ .irq = IRQ_GPIO(0),
+ .platform_data = &cm_x300_da9030_info,
+};
+
+static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
+ .use_pio = 1,
+};
+
+static void __init cm_x300_init_da9030(void)
+{
+ pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
+ i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+}
+
+static void __init cm_x300_init_wi2wi(void)
+{
+ int bt_reset, wlan_en;
+ int err;
+
+ if (system_rev < 130) {
+ wlan_en = 77;
+ bt_reset = 78;
+ } else {
+ wlan_en = 71;
+ bt_reset = 70;
+ }
+
+ /* Libertas and CSR reset */
+ err = gpio_request(wlan_en, "wlan en");
+ if (err) {
+ pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
+ } else {
+ gpio_direction_output(wlan_en, 1);
+ gpio_free(wlan_en);
+ }
+
+ err = gpio_request(bt_reset, "bt reset");
+ if (err) {
+ pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
+ } else {
+ gpio_direction_output(bt_reset, 1);
+ udelay(10);
+ gpio_set_value(bt_reset, 0);
+ udelay(10);
+ gpio_set_value(bt_reset, 1);
+ gpio_free(bt_reset);
+ }
+}
+
+/* MFP */
+static void __init cm_x300_init_mfp(void)
{
/* board-processor specific GPIO initialization */
- pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
+ if (system_rev < 130)
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
+ else
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
+
+ if (cpu_is_pxa310())
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
+}
+
+static void __init cm_x300_init(void)
+{
+ cm_x300_init_mfp();
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ cm_x300_init_da9030();
cm_x300_init_dm9000();
cm_x300_init_lcd();
cm_x300_init_ohci();
@@ -445,7 +679,11 @@
cm_x300_init_nand();
cm_x300_init_leds();
cm_x300_init_i2c();
+ cm_x300_init_spi();
cm_x300_init_rtc();
+ cm_x300_init_ac97();
+ cm_x300_init_wi2wi();
+ cm_x300_init_bl();
}
static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 01bcfaa..061c453 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -130,6 +130,9 @@
static void __init colibri_pxa270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
}
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 37c239c..45c23fd 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -170,6 +170,10 @@
void __init colibri_pxa300_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
colibri_pxa300_init_eth();
colibri_pxa300_init_ohci();
colibri_pxa3xx_init_nand();
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ec0e14b..ae835fa 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -199,6 +199,10 @@
void __init colibri_pxa320_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
colibri_pxa320_init_eth();
colibri_pxa320_init_ohci();
colibri_pxa3xx_init_nand();
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index efebaf4..e6c0a22 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -25,7 +25,7 @@
#include <mach/colibri.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
#include "generic.h"
#include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b536b5a..74446cf 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -671,6 +671,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
corgi_init_spi();
pxa_set_udc_info(&udc_info);
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index a093282..d4a0733 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -214,8 +214,8 @@
.fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT,
.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
.bat_levels = 40,
- .bat_levels_noac = spitz_battery_levels_noac,
- .bat_levels_acin = spitz_battery_levels_acin,
+ .bat_levels_noac = sharpsl_battery_levels_noac,
+ .bat_levels_acin = sharpsl_battery_levels_acin,
.status_high_acin = 188,
.status_low_acin = 178,
.status_high_noac = 185,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 965480e..88575b8 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -268,6 +268,9 @@
/* MSC2 = 0x06697ff4; *//* none/SM501 */
MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
pxa27x_set_i2c_power_info(NULL);
pxa_set_mci_info(&csb726_mci);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 46fabe1c..3395463 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,17 +4,18 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <mach/hardware.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/irda.h>
-#include <plat/i2c.h>
#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
#include <mach/camera.h>
#include <mach/audio.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
#include "devices.h"
#include "generic.h"
@@ -167,13 +168,18 @@
}
};
-struct platform_device pxa_device_ffuart= {
+struct platform_device pxa_device_ffuart = {
.name = "pxa2xx-uart",
.id = 0,
.resource = pxa_resource_ffuart,
.num_resources = ARRAY_SIZE(pxa_resource_ffuart),
};
+void __init pxa_set_ffuart_info(void *info)
+{
+ pxa_register_device(&pxa_device_ffuart, info);
+}
+
static struct resource pxa_resource_btuart[] = {
{
.start = 0x40200000,
@@ -193,6 +199,11 @@
.num_resources = ARRAY_SIZE(pxa_resource_btuart),
};
+void __init pxa_set_btuart_info(void *info)
+{
+ pxa_register_device(&pxa_device_btuart, info);
+}
+
static struct resource pxa_resource_stuart[] = {
{
.start = 0x40700000,
@@ -212,6 +223,11 @@
.num_resources = ARRAY_SIZE(pxa_resource_stuart),
};
+void __init pxa_set_stuart_info(void *info)
+{
+ pxa_register_device(&pxa_device_stuart, info);
+}
+
static struct resource pxa_resource_hwuart[] = {
{
.start = 0x41600000,
@@ -231,6 +247,14 @@
.num_resources = ARRAY_SIZE(pxa_resource_hwuart),
};
+void __init pxa_set_hwuart_info(void *info)
+{
+ if (cpu_is_pxa255())
+ pxa_register_device(&pxa_device_hwuart, info);
+ else
+ pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
+}
+
static struct resource pxai2c_resources[] = {
{
.start = 0x40301680,
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index 74d3f89..8fde338 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -55,6 +55,9 @@
static void __init e330_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index 0800362..f50f055 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -56,6 +56,9 @@
static void __init e350_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
eseries_register_clks();
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index ed9c0c3..55b950f 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -130,6 +130,9 @@
static void __init e400_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
/* Fixme - e400 may have a switched clock */
eseries_register_clks();
eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 49acdfa..94b23a9 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -192,6 +192,9 @@
static void __init e740_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
eseries_register_clks();
clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
"UDCCLK", &pxa25x_device_udc.dev),
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 4052ece..5eccbce 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -194,6 +194,9 @@
static void __init e750_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index 9866c7b..aad129b 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -195,6 +195,9 @@
static void __init e800_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index aec7f42..1c0de80 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -967,7 +967,7 @@
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
static struct regulator *em_x270_camera_ldo;
-static int em_x270_sensor_init(struct device *dev)
+static int em_x270_sensor_init(void)
{
int ret;
@@ -996,7 +996,6 @@
}
struct pxacamera_platform_data em_x270_camera_platform_data = {
- .init = em_x270_sensor_init,
.flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
.mclk_10khz = 2600,
@@ -1049,8 +1048,10 @@
static void __init em_x270_init_camera(void)
{
- pxa_set_camera_info(&em_x270_camera_platform_data);
- platform_device_register(&em_x270_camera);
+ if (em_x270_sensor_init() == 0) {
+ pxa_set_camera_info(&em_x270_camera_platform_data);
+ platform_device_register(&em_x270_camera);
+ }
}
#else
static inline void em_x270_init_camera(void) {}
@@ -1286,6 +1287,10 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
#ifdef CONFIG_PM
pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 588b265..626c82b 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,7 +17,11 @@
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
#include <linux/input.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <linux/leds-lp3944.h>
+
+#include <media/soc_camera.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -29,6 +33,7 @@
#include <plat/i2c.h>
#include <mach/hardware.h>
#include <mach/pxa27x_keypad.h>
+#include <mach/camera.h>
#include "devices.h"
#include "generic.h"
@@ -38,6 +43,9 @@
#define GPIO15_A910_FLIP_LID 15
#define GPIO12_E680_LOCK_SWITCH 12
#define GPIO15_E6_LOCK_SWITCH 15
+#define GPIO50_nCAM_EN 50
+#define GPIO19_GEN1_CAM_RST 19
+#define GPIO28_GEN2_CAM_RST 28
static struct platform_pwm_backlight_data ezx_backlight_data = {
.pwm_id = 0,
@@ -191,8 +199,8 @@
GPIO94_CIF_DD_5,
GPIO17_CIF_DD_6,
GPIO108_CIF_DD_7,
- GPIO50_GPIO, /* CAM_EN */
- GPIO19_GPIO, /* CAM_RST */
+ GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
+ GPIO19_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
/* EMU */
GPIO120_GPIO, /* EMU_MUX1 */
@@ -248,8 +256,8 @@
GPIO48_CIF_DD_5,
GPIO93_CIF_DD_6,
GPIO12_CIF_DD_7,
- GPIO50_GPIO, /* CAM_EN */
- GPIO28_GPIO, /* CAM_RST */
+ GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
+ GPIO28_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
GPIO17_GPIO, /* CAM_FLASH */
};
#endif
@@ -683,6 +691,81 @@
},
};
+/* camera */
+static int a780_camera_init(void)
+{
+ int err;
+
+ /*
+ * GPIO50_nCAM_EN is active low
+ * GPIO19_GEN1_CAM_RST is active on rising edge
+ */
+ err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+ if (err) {
+ pr_err("%s: Failed to request nCAM_EN\n", __func__);
+ goto fail;
+ }
+
+ err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
+ if (err) {
+ pr_err("%s: Failed to request CAM_RST\n", __func__);
+ goto fail_gpio_cam_rst;
+ }
+
+ gpio_direction_output(GPIO50_nCAM_EN, 1);
+ gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
+
+ return 0;
+
+fail_gpio_cam_rst:
+ gpio_free(GPIO50_nCAM_EN);
+fail:
+ return err;
+}
+
+static int a780_camera_power(struct device *dev, int on)
+{
+ gpio_set_value(GPIO50_nCAM_EN, !on);
+ return 0;
+}
+
+static int a780_camera_reset(struct device *dev)
+{
+ gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+ msleep(10);
+ gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+ return 0;
+}
+
+struct pxacamera_platform_data a780_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a780_camera_i2c_board_info = {
+ I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a780_iclink = {
+ .bus_id = 0,
+ .flags = SOCAM_SENSOR_INVERT_PCLK,
+ .i2c_adapter_id = 0,
+ .board_info = &a780_camera_i2c_board_info,
+ .module_name = "mt9m111",
+ .power = a780_camera_power,
+ .reset = a780_camera_reset,
+};
+
+static struct platform_device a780_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &a780_iclink,
+ },
+};
+
static struct platform_device *a780_devices[] __initdata = {
&a780_gpio_keys,
};
@@ -693,12 +776,21 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
set_pxa_fb_info(&ezx_fb_info_1);
pxa_set_keypad_info(&a780_keypad_platform_data);
+ if (a780_camera_init() == 0) {
+ pxa_set_camera_info(&a780_pxacamera_platform_data);
+ platform_device_register(&a780_camera);
+ }
+
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a780_devices));
}
@@ -754,6 +846,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
@@ -816,6 +912,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
@@ -864,6 +964,131 @@
},
};
+/* camera */
+static int a910_camera_init(void)
+{
+ int err;
+
+ /*
+ * GPIO50_nCAM_EN is active low
+ * GPIO28_GEN2_CAM_RST is active on rising edge
+ */
+ err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+ if (err) {
+ pr_err("%s: Failed to request nCAM_EN\n", __func__);
+ goto fail;
+ }
+
+ err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
+ if (err) {
+ pr_err("%s: Failed to request CAM_RST\n", __func__);
+ goto fail_gpio_cam_rst;
+ }
+
+ gpio_direction_output(GPIO50_nCAM_EN, 1);
+ gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
+
+ return 0;
+
+fail_gpio_cam_rst:
+ gpio_free(GPIO50_nCAM_EN);
+fail:
+ return err;
+}
+
+static int a910_camera_power(struct device *dev, int on)
+{
+ gpio_set_value(GPIO50_nCAM_EN, !on);
+ return 0;
+}
+
+static int a910_camera_reset(struct device *dev)
+{
+ gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+ msleep(10);
+ gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+ return 0;
+}
+
+struct pxacamera_platform_data a910_pxacamera_platform_data = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a910_camera_i2c_board_info = {
+ I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a910_iclink = {
+ .bus_id = 0,
+ .i2c_adapter_id = 0,
+ .board_info = &a910_camera_i2c_board_info,
+ .module_name = "mt9m111",
+ .power = a910_camera_power,
+ .reset = a910_camera_reset,
+};
+
+static struct platform_device a910_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &a910_iclink,
+ },
+};
+
+/* leds-lp3944 */
+static struct lp3944_platform_data a910_lp3944_leds = {
+ .leds_size = LP3944_LEDS_MAX,
+ .leds = {
+ [0] = {
+ .name = "a910:red:",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ [1] = {
+ .name = "a910:green:",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ [2] {
+ .name = "a910:blue:",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ /* Leds 3 and 4 are used as display power switches */
+ [3] = {
+ .name = "a910::cli_display",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED_INVERTED
+ },
+ [4] = {
+ .name = "a910::main_display",
+ .status = LP3944_LED_STATUS_ON,
+ .type = LP3944_LED_TYPE_LED_INVERTED
+ },
+ [5] = { .type = LP3944_LED_TYPE_NONE },
+ [6] = {
+ .name = "a910::torch",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED,
+ },
+ [7] = {
+ .name = "a910::flash",
+ .status = LP3944_LED_STATUS_OFF,
+ .type = LP3944_LED_TYPE_LED_INVERTED,
+ },
+ },
+};
+
+static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("lp3944", 0x60),
+ .platform_data = &a910_lp3944_leds,
+ },
+};
+
static struct platform_device *a910_devices[] __initdata = {
&a910_gpio_keys,
};
@@ -874,12 +1099,22 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
+ i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
set_pxa_fb_info(&ezx_fb_info_2);
pxa_set_keypad_info(&a910_keypad_platform_data);
+ if (a910_camera_init() == 0) {
+ pxa_set_camera_info(&a910_pxacamera_platform_data);
+ platform_device_register(&a910_camera);
+ }
+
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a910_devices));
}
@@ -935,6 +1170,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
@@ -971,6 +1210,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 485fede..890fb90 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -67,3 +67,8 @@
extern struct sysdev_class pxa_gpio_sysclass;
extern struct sysdev_class pxa2xx_mfp_sysclass;
extern struct sysdev_class pxa3xx_mfp_sysclass;
+
+void __init pxa_set_ffuart_info(void *info);
+void __init pxa_set_btuart_info(void *info);
+void __init pxa_set_stuart_info(void *info);
+void __init pxa_set_hwuart_info(void *info);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 1708c01..96c3451 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -211,6 +211,11 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_hwuart_info(NULL);
+
gumstix_bluetooth_init();
gumstix_udc_init();
gumstix_mmc_init();
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index f3d220c..c1cab08 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -193,6 +193,9 @@
fix_msc();
pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
pxa_set_udc_info(&h5000_udc_mach_info);
platform_add_devices(ARRAY_AND_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index cea99fe..f9a2e4b 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -150,6 +150,9 @@
static void __init himalaya_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
himalaya_lcd_init();
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 83bd3c6..848c861 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -820,6 +820,7 @@
&gpio_keys,
&backlight,
&w3220,
+ &hx4700_lcd,
&egpio,
&bq24022,
&gpio_vbus,
@@ -849,6 +850,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_ficp_info(&ficp_info);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index b6486ef..5c9e11d 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -179,6 +179,9 @@
printk("idp_init()\n");
pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
platform_device_register(&smc91x_device);
//platform_device_register(&mst_audio_device);
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2a4945d..5b0862d 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -554,8 +554,12 @@
static void __init imote2_init(void)
{
-
pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/* SPI chip select directions - all other directions should
* be handled by drivers.*/
gpio_direction_output(37, 0);
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index aa3d9f7..50f1297 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -105,6 +105,7 @@
*
* PXA935 A0 0x56056931 0x1E653013
* PXA935 B0 0x56056936 0x6E653013
+ * PXA935 B1 0x56056938 0x8E653013
*/
#ifdef CONFIG_PXA25x
#define __cpu_is_pxa210(id) \
@@ -283,7 +284,7 @@
_id == 0x3; \
})
-#define __cpu_is_pxa9xx(id) \
+#define __cpu_is_pxa93x(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
_id == 0x683 || _id == 0x693; \
@@ -299,9 +300,9 @@
__cpu_is_pxa3xx(read_cpuid_id()); \
})
-#define cpu_is_pxa9xx() \
+#define cpu_is_pxa93x() \
({ \
- __cpu_is_pxa9xx(read_cpuid_id()); \
+ __cpu_is_pxa93x(read_cpuid_id()); \
})
/*
* return current memory and LCD clock frequency in units of 10kHz
diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h
new file mode 100644
index 0000000..2d3f14e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtreo.h
@@ -0,0 +1,67 @@
+/*
+ * GPIOs and interrupts for Palm Treo smartphones
+ *
+ * currently supported:
+ * Palm Treo 680 (GSM)
+ * Palm Centro 685 (GSM)
+ *
+ * Author: Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * find more info at www.hackndev.com
+ *
+ */
+
+#ifndef _INCLUDE_TREO_H_
+#define _INCLUDE_TREO_H_
+
+/* GPIOs */
+#define GPIO_NR_TREO_POWER_DETECT 0
+#define GPIO_NR_TREO_AMP_EN 27
+#define GPIO_NR_TREO_GREEN_LED 20
+#define GPIO_NR_TREO_RED_LED 79
+#define GPIO_NR_TREO_SD_DETECT_N 113
+#define GPIO_NR_TREO_EP_DETECT_N 116
+#define GPIO_NR_TREO_USB_DETECT 1
+#define GPIO_NR_TREO_USB_PULLUP 114
+#define GPIO_NR_TREO_GSM_POWER 40
+#define GPIO_NR_TREO_GSM_RESET 87
+#define GPIO_NR_TREO_GSM_WAKE 57
+#define GPIO_NR_TREO_GSM_HOST_WAKE 14
+#define GPIO_NR_TREO_GSM_TRIGGER 10
+#define GPIO_NR_TREO_IR_EN 115
+#define GPIO_NR_TREO_IR_TXD 47
+#define GPIO_NR_TREO_BL_POWER 38
+#define GPIO_NR_TREO_LCD_POWER 25
+
+/* Treo680 specific GPIOs */
+#ifdef CONFIG_MACH_TREO680
+#define GPIO_NR_TREO680_SD_READONLY 33
+#define GPIO_NR_TREO680_SD_POWER 42
+#define GPIO_NR_TREO680_VIBRATE_EN 44
+#define GPIO_NR_TREO680_KEYB_BL 24
+#define GPIO_NR_TREO680_BT_EN 43
+#endif /* CONFIG_MACH_TREO680 */
+
+/* Centro685 specific GPIOs */
+#define GPIO_NR_CENTRO_SD_POWER 21
+#define GPIO_NR_CENTRO_VIBRATE_EN 22
+#define GPIO_NR_CENTRO_KEYB_BL 33
+#define GPIO_NR_CENTRO_BT_EN 80
+
+/* Various addresses */
+#define TREO_PHYS_RAM_START 0xa0000000
+#define TREO_PHYS_IO_START 0x40000000
+#define TREO_STR_BASE 0xa2000000
+
+/* BACKLIGHT */
+#define TREO_MAX_INTENSITY 254
+#define TREO_DEFAULT_INTENSITY 160
+#define TREO_LIMIT_MASK 0x7F
+#define TREO_PRESCALER 63
+#define TREO_PERIOD_NS 3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index f73061c..160ec83 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -76,7 +76,8 @@
u_char bpp;
u_int cmap_greyscale:1,
depth:8,
- unused:23;
+ transparency:1,
+ unused:22;
/* Parallel Mode Timing */
u_char hsync_len;
diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h
new file mode 100644
index 0000000..44b0b20
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h
@@ -0,0 +1,199 @@
+#ifndef __ASM_ARCH_PXA3xx_U2D_H
+#define __ASM_ARCH_PXA3xx_U2D_H
+
+#include <mach/bitfield.h>
+
+/*
+ * USB2 device controller registers and bits definitions
+ */
+#define U2DCR (0x0000) /* U2D Control Register */
+#define U2DCR_NDC (1 << 31) /* NAK During Config */
+#define U2DCR_HSTC (0x7 << 28) /* High Speed Timeout Calibration */
+#define U2DCR_SPEOREN (1 << 27) /* Short Packet EOR INTR generation Enable */
+#define U2DCR_FSTC (0x7 << 24) /* Full Speed Timeout Calibration */
+#define U2DCR_UCLKOVR (1 << 22) /* UTM Clock Override */
+#define U2DCR_ABP (1 << 21) /* Application Bus Power */
+#define U2DCR_ADD (1 << 20) /* Application Device Disconnect */
+#define U2DCR_CC (1 << 19) /* Configuration Change */
+#define U2DCR_HS (1 << 18) /* High Speed USB Detection */
+#define U2DCR_SMAC (1 << 17) /* Switch Endpoint Memory to Active Configuration */
+#define U2DCR_DWRE (1 << 16) /* Device Remote Wake-up Feature */
+#define U2DCR_ACN (0xf << 12) /* Active U2D Configuration Number */
+#define U2DCR_AIN (0xf << 8) /* Active U2D Interface Number */
+#define U2DCR_AAISN (0xf << 4) /* Active U2D Alternate Interface Setting Number */
+#define U2DCR_EMCE (1 << 3) /* Endpoint Memory Configuration Error */
+#define U2DCR_UDR (1 << 2) /* U2D Resume */
+#define U2DCR_UDA (1 << 1) /* U2D Active */
+#define U2DCR_UDE (1 << 0) /* U2D Enable */
+
+#define U2DICR (0x0004) /* U2D Interrupt Control Register */
+#define U2DISR (0x000C) /* U2D Interrupt Status Register */
+#define U2DINT_CC (1 << 31) /* Interrupt - Configuration Change */
+#define U2DINT_SOF (1 << 30) /* Interrupt - SOF */
+#define U2DINT_USOF (1 << 29) /* Interrupt - micro SOF */
+#define U2DINT_RU (1 << 28) /* Interrupt - Resume */
+#define U2DINT_SU (1 << 27) /* Interrupt - Suspend */
+#define U2DINT_RS (1 << 26) /* Interrupt - Reset */
+#define U2DINT_DPE (1 << 25) /* Interrupt - Data Packet Error */
+#define U2DINT_FIFOERR (0x4) /* Interrupt - endpoint FIFO error */
+#define U2DINT_PACKETCMP (0x2) /* Interrupt - endpoint packet complete */
+#define U2DINT_SPACKETCMP (0x1) /* Interrupt - endpoint short packet complete */
+
+#define U2DFNR (0x0014) /* U2D Frame Number Register */
+
+#define U2DINT(n, intr) (((intr) & 0x07) << (((n) & 0x07) * 3))
+#define U2DICR2 (0x0008) /* U2D Interrupt Control Register 2 */
+#define U2DISR2 (0x0010) /* U2D Interrupt Status Register 2 */
+
+#define U2DOTGCR (0x0020) /* U2D OTG Control Register */
+#define U2DOTGCR_OTGEN (1 << 31) /* On-The-Go Enable */
+#define U2DOTGCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation Protocal Port Support */
+#define U2DOTGCR_AHNP (1 << 29) /* A-device Host Negotiation Protocal Support */
+#define U2DOTGCR_BHNP (1 << 28) /* B-device Host Negotiation Protocal Enable */
+
+#ifdef CONFIG_CPU_PXA930
+#define U2DOTGCR_LPA (1 << 15) /* ULPI low power mode active */
+#define U2DOTGCR_IESI (1 << 13) /* OTG interrupt Enable */
+#define U2DOTGCR_ISSI (1 << 12) /* OTG interrupt status */
+#endif
+
+#define U2DOTGCR_CKAF (1 << 5) /* Carkit Mode Alternate Function Select */
+#define U2DOTGCR_UTMID (1 << 4) /* UTMI Interface Disable */
+#define U2DOTGCR_ULAF (1 << 3) /* ULPI Mode Alternate Function Select */
+#define U2DOTGCR_SMAF (1 << 2) /* Serial Mode Alternate Function Select */
+#define U2DOTGCR_RTSM (1 << 1) /* Return to Synchronous Mode (ULPI Mode) */
+#define U2DOTGCR_ULE (1 << 0) /* ULPI Wrapper Enable */
+
+#define U2DOTGICR (0x0024) /* U2D OTG Interrupt Control Register */
+#define U2DOTGISR (0x0028) /* U2D OTG Interrupt Status Register */
+
+#define U2DOTGINT_SF (1 << 17) /* OTG Set Feature Command Received */
+#define U2DOTGINT_SI (1 << 16) /* OTG Interrupt */
+#define U2DOTGINT_RLS1 (1 << 14) /* RXCMD Linestate[1] Change Interrupt Rise */
+#define U2DOTGINT_RLS0 (1 << 13) /* RXCMD Linestate[0] Change Interrupt Rise */
+#define U2DOTGINT_RID (1 << 12) /* RXCMD OTG ID Change Interrupt Rise */
+#define U2DOTGINT_RSE (1 << 11) /* RXCMD OTG Session End Interrupt Rise */
+#define U2DOTGINT_RSV (1 << 10) /* RXCMD OTG Session Valid Interrupt Rise */
+#define U2DOTGINT_RVV (1 << 9) /* RXCMD OTG Vbus Valid Interrupt Rise */
+#define U2DOTGINT_RCK (1 << 8) /* RXCMD Carkit Interrupt Rise */
+#define U2DOTGINT_FLS1 (1 << 6) /* RXCMD Linestate[1] Change Interrupt Fall */
+#define U2DOTGINT_FLS0 (1 << 5) /* RXCMD Linestate[0] Change Interrupt Fall */
+#define U2DOTGINT_FID (1 << 4) /* RXCMD OTG ID Change Interrupt Fall */
+#define U2DOTGINT_FSE (1 << 3) /* RXCMD OTG Session End Interrupt Fall */
+#define U2DOTGINT_FSV (1 << 2) /* RXCMD OTG Session Valid Interrupt Fall */
+#define U2DOTGINT_FVV (1 << 1) /* RXCMD OTG Vbus Valid Interrupt Fall */
+#define U2DOTGINT_FCK (1 << 0) /* RXCMD Carkit Interrupt Fall */
+
+#define U2DOTGUSR (0x002C) /* U2D OTG ULPI Status Register */
+#define U2DOTGUSR_LPA (1 << 31) /* ULPI Low Power Mode Active */
+#define U2DOTGUSR_S6A (1 << 30) /* ULPI Serial Mode (6-pin) Active */
+#define U2DOTGUSR_S3A (1 << 29) /* ULPI Serial Mode (3-pin) Active */
+#define U2DOTGUSR_CKA (1 << 28) /* ULPI Car Kit Mode Active */
+#define U2DOTGUSR_LS1 (1 << 6) /* RXCMD Linestate 1 Status */
+#define U2DOTGUSR_LS0 (1 << 5) /* RXCMD Linestate 0 Status */
+#define U2DOTGUSR_ID (1 << 4) /* OTG IDGnd Status */
+#define U2DOTGUSR_SE (1 << 3) /* OTG Session End Status */
+#define U2DOTGUSR_SV (1 << 2) /* OTG Session Valid Status */
+#define U2DOTGUSR_VV (1 << 1) /* OTG Vbus Valid Status */
+#define U2DOTGUSR_CK (1 << 0) /* Carkit Interrupt Status */
+
+#define U2DOTGUCR (0x0030) /* U2D OTG ULPI Control Register */
+#define U2DOTGUCR_RUN (1 << 25) /* RUN */
+#define U2DOTGUCR_RNW (1 << 24) /* Read or Write operation */
+#define U2DOTGUCR_ADDR (0x3f << 16) /* Address of the ULPI PHY register */
+#define U2DOTGUCR_WDATA (0xff << 8) /* The data for a WRITE command */
+#define U2DOTGUCR_RDATA (0xff << 0) /* The data for a READ command */
+
+#define U2DP3CR (0x0034) /* U2D Port 3 Control Register */
+#define U2DP3CR_P2SS (0x3 << 8) /* Host Port 2 Serial Mode Select */
+#define U2DP3CR_P3SS (0x7 << 4) /* Host Port 3 Serial Mode Select */
+#define U2DP3CR_VPVMBEN (0x1 << 2) /* Host Port 3 Vp/Vm Block Enable */
+#define U2DP3CR_CFG (0x3 << 0) /* Host Port 3 Configuration */
+
+#define U2DCSR0 (0x0100) /* U2D Control/Status Register - Endpoint 0 */
+#define U2DCSR0_IPA (1 << 8) /* IN Packet Adjusted */
+#define U2DCSR0_SA (1 << 7) /* SETUP Active */
+#define U2DCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */
+#define U2DCSR0_FST (1 << 5) /* Force Stall */
+#define U2DCSR0_SST (1 << 4) /* Send Stall */
+#define U2DCSR0_DME (1 << 3) /* DMA Enable */
+#define U2DCSR0_FTF (1 << 2) /* Flush Transmit FIFO */
+#define U2DCSR0_IPR (1 << 1) /* IN Packet Ready */
+#define U2DCSR0_OPC (1 << 0) /* OUT Packet Complete */
+
+#define U2DCSR(x) (0x0100 + ((x) << 2)) /* U2D Control/Status Register - Endpoint x */
+#define U2DCSR_BF (1 << 10) /* Buffer Full, for OUT eps */
+#define U2DCSR_BE (1 << 10) /* Buffer Empty, for IN eps */
+#define U2DCSR_DPE (1 << 9) /* Data Packet Error, for ISO eps only */
+#define U2DCSR_FEF (1 << 8) /* Flush Endpoint FIFO */
+#define U2DCSR_SP (1 << 7) /* Short Packet Control/Status, for OUT eps only, readonly */
+#define U2DCSR_BNE (1 << 6) /* Buffer Not Empty, for OUT eps */
+#define U2DCSR_BNF (1 << 6) /* Buffer Not Full, for IN eps */
+#define U2DCSR_FST (1 << 5) /* Force STALL, write 1 set */
+#define U2DCSR_SST (1 << 4) /* Sent STALL, write 1 clear */
+#define U2DCSR_DME (1 << 3) /* DMA Enable */
+#define U2DCSR_TRN (1 << 2) /* Tx/Rx NAK, write 1 clear */
+#define U2DCSR_PC (1 << 1) /* Packet Complete, write 1 clear */
+#define U2DCSR_FS (1 << 0) /* FIFO needs Service */
+
+#define U2DBCR0 (0x0200) /* U2D Byte Count Register - Endpoint 0 */
+#define U2DBCR(x) (0x0200 + ((x) << 2)) /* U2D Byte Count Register - Endpoint x */
+
+#define U2DDR0 (0x0300) /* U2D Data Register - Endpoint 0 */
+
+#define U2DEPCR(x) (0x0400 + ((x) << 2)) /* U2D Configuration Register - Endpoint x */
+#define U2DEPCR_EE (1 << 0) /* Endpoint Enable */
+#define U2DEPCR_BS_MASK (0x3FE) /* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */
+
+#define U2DSCA (0x0500) /* U2D Setup Command Address */
+#define U2DSCA_VALUE (0x0120)
+
+#define U2DEN0 (0x0504) /* U2D Endpoint Information Register - Endpoint 0 */
+#define U2DEN(x) (0x0504 + ((x) << 2)) /* U2D Endpoint Information Register - Endpoint x */
+
+/* U2DMA registers */
+#define U2DMACSR0 (0x1000) /* U2DMA Control/Status Register - Channel 0 */
+#define U2DMACSR(x) (0x1000 + ((x) << 2)) /* U2DMA Control/Status Register - Channel x */
+#define U2DMACSR_RUN (1 << 31) /* Run Bit (read / write) */
+#define U2DMACSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
+#define U2DMACSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
+#define U2DMACSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define U2DMACSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define U2DMACSR_RASIRQEN (1 << 23) /* Request After Cnannel Stopped Interrupt Enable */
+#define U2DMACSR_MASKRUN (1 << 22) /* Mask Run */
+#define U2DMACSR_SCEMC (3 << 18) /* System Bus Split Completion Error Message Class */
+#define U2DMACSR_SCEMI (0x1f << 13) /* System Bus Split Completion Error Message Index */
+#define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */
+#define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */
+#define U2DMACSR_REQPEND (1 << 8) /* Request Pending */
+#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
+#define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */
+#define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */
+#define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */
+
+#define U2DMACR (0x1080) /* U2DMA Control Register */
+#define U2DMAINT (0x10F0) /* U2DMA Interrupt Register */
+
+#define U2DMABR0 (0x1100) /* U2DMA Branch Register - Channel 0 */
+#define U2DMABR(x) (0x1100 + (x) << 2) /* U2DMA Branch Register - Channel x */
+
+#define U2DMADADR0 (0x1200) /* U2DMA Descriptor Address Register - Channel 0 */
+#define U2DMADADR(x) (0x1200 + (x) * 0x10) /* U2DMA Descriptor Address Register - Channel x */
+
+#define U2DMADADR_STOP (1U << 0)
+
+#define U2DMASADR0 (0x1204) /* U2DMA Source Address Register - Channel 0 */
+#define U2DMASADR(x) (0x1204 + (x) * 0x10) /* U2DMA Source Address Register - Channel x */
+#define U2DMATADR0 (0x1208) /* U2DMA Target Address Register - Channel 0 */
+#define U2DMATADR(x) (0x1208 + (x) * 0x10) /* U2DMA Target Address Register - Channel x */
+
+#define U2DMACMDR0 (0x120C) /* U2DMA Command Address Register - Channel 0 */
+#define U2DMACMDR(x) (0x120C + (x) * 0x10) /* U2DMA Command Address Register - Channel x */
+
+#define U2DMACMDR_XFRDIS (1 << 31) /* Transfer Direction */
+#define U2DMACMDR_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define U2DMACMDR_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define U2DMACMDR_PACKCOMP (1 << 13) /* Packet Complete */
+#define U2DMACMDR_LEN (0x07ff) /* length mask (max = 2K - 1) */
+
+#endif /* __ASM_ARCH_PXA3xx_U2D_H */
diff --git a/arch/arm/mach-pxa/include/mach/treo680.h b/arch/arm/mach-pxa/include/mach/treo680.h
deleted file mode 100644
index af443b2..0000000
--- a/arch/arm/mach-pxa/include/mach/treo680.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Treo 680 smartphone
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_TREO680_H_
-#define _INCLUDE_TREO680_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO680_POWER_DETECT 0
-#define GPIO_NR_TREO680_AMP_EN 27
-#define GPIO_NR_TREO680_KEYB_BL 24
-#define GPIO_NR_TREO680_VIBRATE_EN 44
-#define GPIO_NR_TREO680_GREEN_LED 20
-#define GPIO_NR_TREO680_RED_LED 79
-#define GPIO_NR_TREO680_SD_DETECT_N 113
-#define GPIO_NR_TREO680_SD_READONLY 33
-#define GPIO_NR_TREO680_EP_DETECT_N 116
-#define GPIO_NR_TREO680_SD_POWER 42
-#define GPIO_NR_TREO680_USB_DETECT 1
-#define GPIO_NR_TREO680_USB_PULLUP 114
-#define GPIO_NR_TREO680_GSM_POWER 40
-#define GPIO_NR_TREO680_GSM_RESET 87
-#define GPIO_NR_TREO680_GSM_WAKE 57
-#define GPIO_NR_TREO680_GSM_HOST_WAKE 14
-#define GPIO_NR_TREO680_GSM_TRIGGER 10
-#define GPIO_NR_TREO680_BT_EN 43
-#define GPIO_NR_TREO680_IR_EN 115
-#define GPIO_NR_TREO680_IR_TXD 47
-#define GPIO_NR_TREO680_BL_POWER 38
-#define GPIO_NR_TREO680_LCD_POWER 25
-
-/* Various addresses */
-#define TREO680_PHYS_RAM_START 0xa0000000
-#define TREO680_PHYS_IO_START 0x40000000
-#define TREO680_STR_BASE 0xa2000000
-
-/* BACKLIGHT */
-#define TREO680_MAX_INTENSITY 254
-#define TREO680_DEFAULT_INTENSITY 160
-#define TREO680_LIMIT_MASK 0x7F
-#define TREO680_PRESCALER 63
-#define TREO680_PERIOD_NS 3500
-
-#endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 1384895..f28c171 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -44,10 +44,10 @@
#include <mach/ssp.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
-#include <plat/i2c.h>
#include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
#include <mach/littleton.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
#include "generic.h"
@@ -413,6 +413,10 @@
/* initialize MFP configurations */
pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/*
* Note: we depend bootloader set the correct
* value to MSC register for SMC91x.
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index d64395f..1373c22 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -455,6 +455,10 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
lpd270_flash_data[1].width = 4;
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c6a94d3..98ee7e5 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -518,6 +518,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
pxa_set_udc_info(&udc_info);
set_pxa_fb_info(&sharp_lm8v31);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5360c07..8a38d60 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -742,6 +742,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_add_devices(ARRAY_AND_SIZE(devices));
err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a4eeae3..851ee0f 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -576,6 +576,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
mst_flash_data[1].width = 4;
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 3cab452..2466a44 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -798,6 +798,9 @@
UP2OCR = UP2OCR_HXOE;
pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
bootstrap_init();
set_pxa_fb_info(&mioa701_pxafb_info);
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index a65713c..6d45039 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -84,6 +84,9 @@
static void __init mp900c_init(void)
{
printk(KERN_INFO "MobilePro 900/C machine init\n");
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 1ad029d..5914021 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -530,6 +530,10 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
palmld_pm_init();
set_pxa_fb_info(&palmld_lcd_screen);
pxa_set_mci_info(&palmld_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 2dd7ce2..7f89ca2 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -419,6 +419,10 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
palmt5_pm_init();
set_pxa_fb_info(&palmt5_lcd_screen);
pxa_set_mci_info(&palmt5_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 0b92291..3084175 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -416,6 +416,11 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_hwuart_info(NULL);
+
set_pxa_fb_info(&palmtc_lcd_screen);
pxa_set_mci_info(&palmtc_mci_platform_data);
pxa_set_udc_info(&palmtc_udc_info);
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 277c406..265d62b 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -373,6 +373,10 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
set_pxa_fb_info(&palmte2_lcd_screen);
pxa_set_mci_info(&palmte2_mci_platform_data);
palmte2_udc_init();
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
new file mode 100644
index 0000000..606eb7e
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -0,0 +1,716 @@
+/*
+ * Hardware definitions for Palm Treo smartphones
+ *
+ * currently supported:
+ * Palm Treo 680 (GSM)
+ * Palm Centro 685 (GSM)
+ *
+ * Author: Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+#include <linux/sysdev.h>
+#include <linux/w1-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/palmtreo.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/ohci.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/palmasoc.h>
+#include <mach/camera.h>
+
+#include <sound/pxa2xx-lib.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long treo_pin_config[] __initdata = {
+ /* MMC */
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+ GPIO113_GPIO, /* SD detect */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
+
+ /* IrDA */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */
+
+ /* MATRIX KEYPAD */
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO98_KP_MKIN_4,
+ GPIO91_KP_MKIN_6,
+ GPIO13_KP_MKIN_7,
+ GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+ GPIO106_KP_MKOUT_3,
+ GPIO107_KP_MKOUT_4,
+ GPIO108_KP_MKOUT_5,
+ GPIO96_KP_MKOUT_6,
+ GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+
+ /* Quick Capture Interface */
+ GPIO84_CIF_FV,
+ GPIO85_CIF_LV,
+ GPIO53_CIF_MCLK,
+ GPIO54_CIF_PCLK,
+ GPIO81_CIF_DD_0,
+ GPIO55_CIF_DD_1,
+ GPIO51_CIF_DD_2,
+ GPIO50_CIF_DD_3,
+ GPIO52_CIF_DD_4,
+ GPIO48_CIF_DD_5,
+ GPIO17_CIF_DD_6,
+ GPIO12_CIF_DD_7,
+
+ /* I2C */
+ GPIO117_I2C_SCL,
+ GPIO118_I2C_SDA,
+
+ /* GSM */
+ GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH, /* GSM host wake up */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO39_FFUART_TXD,
+ GPIO41_FFUART_RTS,
+
+ /* MISC. */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* external power detect */
+ GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* silent switch */
+ GPIO116_GPIO, /* headphone detect */
+ GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */
+};
+
+#ifdef CONFIG_MACH_TREO680
+static unsigned long treo680_pin_config[] __initdata = {
+ GPIO33_GPIO, /* SD read only */
+
+ /* MATRIX KEYPAD - different wake up source */
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO99_KP_MKIN_5,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned long centro685_pin_config[] __initdata = {
+ /* Bluetooth attached to BT UART*/
+ MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW), /* power: LOW = off */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* MATRIX KEYPAD - different wake up source */
+ GPIO100_KP_MKIN_0,
+ GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static struct pxamci_platform_data treo680_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY,
+ .gpio_power = GPIO_NR_TREO680_SD_POWER,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct pxamci_platform_data centro_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_TREO_SD_DETECT_N,
+ .gpio_card_ro = -1,
+ .gpio_power = GPIO_NR_CENTRO_SD_POWER,
+ .gpio_power_invert = 1,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static unsigned int treo680_matrix_keys[] = {
+ KEY(0, 0, KEY_F8), /* Red/Off/Power */
+ KEY(0, 1, KEY_LEFT),
+ KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
+ KEY(0, 3, KEY_L),
+ KEY(0, 4, KEY_A),
+ KEY(0, 5, KEY_Q),
+ KEY(0, 6, KEY_P),
+
+ KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
+ KEY(1, 1, KEY_RIGHT),
+ KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
+ KEY(1, 3, KEY_Z),
+ KEY(1, 4, KEY_S),
+ KEY(1, 5, KEY_W),
+
+ KEY(2, 0, KEY_F1), /* Phone */
+ KEY(2, 1, KEY_UP),
+ KEY(2, 2, KEY_0),
+ KEY(2, 3, KEY_X),
+ KEY(2, 4, KEY_D),
+ KEY(2, 5, KEY_E),
+
+ KEY(3, 0, KEY_F10), /* Calendar */
+ KEY(3, 1, KEY_DOWN),
+ KEY(3, 2, KEY_SPACE),
+ KEY(3, 3, KEY_C),
+ KEY(3, 4, KEY_F),
+ KEY(3, 5, KEY_R),
+
+ KEY(4, 0, KEY_F12), /* Mail */
+ KEY(4, 1, KEY_KPENTER),
+ KEY(4, 2, KEY_RIGHTALT), /* Alt */
+ KEY(4, 3, KEY_V),
+ KEY(4, 4, KEY_G),
+ KEY(4, 5, KEY_T),
+
+ KEY(5, 0, KEY_F9), /* Home */
+ KEY(5, 1, KEY_PAGEUP), /* Side up */
+ KEY(5, 2, KEY_DOT),
+ KEY(5, 3, KEY_B),
+ KEY(5, 4, KEY_H),
+ KEY(5, 5, KEY_Y),
+
+ KEY(6, 0, KEY_TAB), /* Side Activate */
+ KEY(6, 1, KEY_PAGEDOWN), /* Side down */
+ KEY(6, 2, KEY_ENTER),
+ KEY(6, 3, KEY_N),
+ KEY(6, 4, KEY_J),
+ KEY(6, 5, KEY_U),
+
+ KEY(7, 0, KEY_F6), /* Green/Call */
+ KEY(7, 1, KEY_O),
+ KEY(7, 2, KEY_BACKSPACE),
+ KEY(7, 3, KEY_M),
+ KEY(7, 4, KEY_K),
+ KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 7,
+ .matrix_key_map = treo680_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys),
+ .direct_key_map = { KEY_CONNECT },
+ .direct_key_num = 1,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned int centro_matrix_keys[] = {
+ KEY(0, 0, KEY_F9), /* Home */
+ KEY(0, 1, KEY_LEFT),
+ KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
+ KEY(0, 3, KEY_L),
+ KEY(0, 4, KEY_A),
+ KEY(0, 5, KEY_Q),
+ KEY(0, 6, KEY_P),
+
+ KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
+ KEY(1, 1, KEY_RIGHT),
+ KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
+ KEY(1, 3, KEY_Z),
+ KEY(1, 4, KEY_S),
+ KEY(1, 5, KEY_W),
+
+ KEY(2, 0, KEY_F1), /* Phone */
+ KEY(2, 1, KEY_UP),
+ KEY(2, 2, KEY_0),
+ KEY(2, 3, KEY_X),
+ KEY(2, 4, KEY_D),
+ KEY(2, 5, KEY_E),
+
+ KEY(3, 0, KEY_F10), /* Calendar */
+ KEY(3, 1, KEY_DOWN),
+ KEY(3, 2, KEY_SPACE),
+ KEY(3, 3, KEY_C),
+ KEY(3, 4, KEY_F),
+ KEY(3, 5, KEY_R),
+
+ KEY(4, 0, KEY_F12), /* Mail */
+ KEY(4, 1, KEY_KPENTER),
+ KEY(4, 2, KEY_RIGHTALT), /* Alt */
+ KEY(4, 3, KEY_V),
+ KEY(4, 4, KEY_G),
+ KEY(4, 5, KEY_T),
+
+ KEY(5, 0, KEY_F8), /* Red/Off/Power */
+ KEY(5, 1, KEY_PAGEUP), /* Side up */
+ KEY(5, 2, KEY_DOT),
+ KEY(5, 3, KEY_B),
+ KEY(5, 4, KEY_H),
+ KEY(5, 5, KEY_Y),
+
+ KEY(6, 0, KEY_TAB), /* Side Activate */
+ KEY(6, 1, KEY_PAGEDOWN), /* Side down */
+ KEY(6, 2, KEY_ENTER),
+ KEY(6, 3, KEY_N),
+ KEY(6, 4, KEY_J),
+ KEY(6, 5, KEY_U),
+
+ KEY(7, 0, KEY_F6), /* Green/Call */
+ KEY(7, 1, KEY_O),
+ KEY(7, 2, KEY_BACKSPACE),
+ KEY(7, 3, KEY_M),
+ KEY(7, 4, KEY_K),
+ KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+ .matrix_key_rows = 8,
+ .matrix_key_cols = 7,
+ .matrix_key_map = centro_matrix_keys,
+ .matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys),
+ .direct_key_map = { KEY_CONNECT },
+ .direct_key_num = 1,
+
+ .debounce_interval = 30,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+
+static pxa2xx_audio_ops_t treo_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int treo_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ gpio_free(GPIO_NR_TREO_BL_POWER);
+err:
+ return ret;
+}
+
+static int treo_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
+ return TREO_MAX_INTENSITY - brightness;
+};
+
+static void treo_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_TREO_BL_POWER);
+}
+
+static struct platform_pwm_backlight_data treo_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = TREO_MAX_INTENSITY,
+ .dft_brightness = TREO_DEFAULT_INTENSITY,
+ .pwm_period_ns = TREO_PERIOD_NS,
+ .init = treo_backlight_init,
+ .notify = treo_backlight_notify,
+ .exit = treo_backlight_exit,
+};
+
+static struct platform_device treo_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &treo_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static struct pxaficp_platform_data treo_ficp_info = {
+ .gpio_pwdown = GPIO_NR_TREO_IR_EN,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_TREO_USB_DETECT,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_TREO_USB_PULLUP,
+};
+
+
+/******************************************************************************
+ * USB host
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static struct pxaohci_platform_data treo680_ohci_info = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT1 | ENABLE_PORT3,
+ .power_budget = 0,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ gpio_free(GPIO_NR_TREO_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int treo_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_TREO_POWER_DETECT);
+}
+
+static char *treo_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = treo_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = treo_supplicants,
+ .num_supplicants = ARRAY_SIZE(treo_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * Vibra and LEDs
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static struct gpio_led treo680_gpio_leds[] = {
+ {
+ .name = "treo680:vibra:vibra",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_TREO680_VIBRATE_EN,
+ },
+ {
+ .name = "treo680:green:led",
+ .default_trigger = "mmc0",
+ .gpio = GPIO_NR_TREO_GREEN_LED,
+ },
+ {
+ .name = "treo680:white:keybbl",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_TREO680_KEYB_BL,
+ },
+};
+
+static struct gpio_led_platform_data treo680_gpio_led_info = {
+ .leds = treo680_gpio_leds,
+ .num_leds = ARRAY_SIZE(treo680_gpio_leds),
+};
+
+static struct platform_device treo680_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &treo680_gpio_led_info,
+ }
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct gpio_led centro_gpio_leds[] = {
+ {
+ .name = "centro:vibra:vibra",
+ .default_trigger = "none",
+ .gpio = GPIO_NR_CENTRO_VIBRATE_EN,
+ },
+ {
+ .name = "centro:green:led",
+ .default_trigger = "mmc0",
+ .gpio = GPIO_NR_TREO_GREEN_LED,
+ },
+ {
+ .name = "centro:white:keybbl",
+ .default_trigger = "none",
+ .active_low = 1,
+ .gpio = GPIO_NR_CENTRO_KEYB_BL,
+ },
+};
+
+static struct gpio_led_platform_data centro_gpio_led_info = {
+ .leds = centro_gpio_leds,
+ .num_leds = ARRAY_SIZE(centro_gpio_leds),
+};
+
+static struct platform_device centro_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = ¢ro_gpio_led_info,
+ }
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+/* TODO: add support for 324x324 */
+static struct pxafb_mode_info treo_lcd_modes[] = {
+{
+ .pixclock = 86538,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 20,
+ .right_margin = 8,
+ .upper_margin = 8,
+ .lower_margin = 5,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+ gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
+}
+
+static struct pxafb_mach_info treo_lcd_screen = {
+ .modes = treo_lcd_modes,
+ .num_modes = ARRAY_SIZE(treo_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+static void __init treo_pm_init(void)
+{
+ static u32 resume[] = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+ };
+
+ /* this is where the bootloader jumps */
+ memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
+}
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *treo_devices[] __initdata = {
+ &treo_backlight,
+ &power_supply,
+};
+
+#ifdef CONFIG_MACH_TREO680
+static struct platform_device *treo680_devices[] __initdata = {
+ &treo680_leds,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct platform_device *centro_devices[] __initdata = {
+ ¢ro_leds,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/* setup udc GPIOs initial state */
+static void __init treo_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_TREO_USB_PULLUP);
+ }
+}
+
+static void __init treo_lcd_power_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
+ if (ret) {
+ pr_err("Treo680: LCD power GPIO request failed!\n");
+ return;
+ }
+
+ ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
+ if (ret) {
+ pr_err("Treo680: setting LCD power GPIO direction failed!\n");
+ gpio_free(GPIO_NR_TREO_LCD_POWER);
+ return;
+ }
+
+ treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
+}
+
+static void __init treo_init(void)
+{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
+ treo_pm_init();
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
+ treo_lcd_power_init();
+ set_pxa_fb_info(&treo_lcd_screen);
+ treo_udc_init();
+ pxa_set_udc_info(&treo_udc_info);
+ pxa_set_ac97_info(&treo_ac97_pdata);
+ pxa_set_ficp_info(&treo_ficp_info);
+
+ platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+}
+
+#ifdef CONFIG_MACH_TREO680
+static void __init treo680_init(void)
+{
+ treo_init();
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
+ pxa_set_mci_info(&treo680_mci_platform_data);
+ pxa_set_keypad_info(&treo680_keypad_platform_data);
+ pxa_set_ohci_info(&treo680_ohci_info);
+
+ platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
+}
+
+MACHINE_START(TREO680, "Palm Treo 680")
+ .phys_io = TREO_PHYS_IO_START,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = treo680_init,
+MACHINE_END
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static void __init centro_init(void)
+{
+ treo_init();
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+ pxa_set_mci_info(¢ro_mci_platform_data);
+
+ pxa_set_keypad_info(¢ro_keypad_platform_data);
+
+ platform_add_devices(ARRAY_AND_SIZE(centro_devices));
+}
+
+MACHINE_START(CENTRO, "Palm Centro 685")
+ .phys_io = TREO_PHYS_IO_START,
+ .io_pg_offst = io_p2v(0x40000000),
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa27x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = centro_init,
+MACHINE_END
+#endif /* CONFIG_MACH_CENTRO */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 76a2b37..7bf18c2 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -570,6 +570,10 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
palmtx_pm_init();
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index c2bf493..d787ac7 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -491,6 +491,10 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
set_pxa_fb_info(&palmz72_lcd_screen);
pxa_set_mci_info(&palmz72_mci_platform_data);
palmz72_udc_init();
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 6abfa29..2190af0 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -227,6 +227,10 @@
pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
/* at last call the baseboard to initialize itself */
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index bbda570..d5255ae 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -359,19 +359,12 @@
GPIO44_CIF_LV,
};
-static int pcm990_pxacamera_init(struct device *dev)
-{
- pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
- return 0;
-}
-
/*
* CICR4: PCLK_EN: Pixel clock is supplied by the sensor
* MCLK_EN: Master clock is generated by PXA
* PCP: Data sampled on the falling edge of pixel clock
*/
struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
- .init = pcm990_pxacamera_init,
.flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
.mclk_10khz = 1000,
@@ -532,6 +525,7 @@
pxa_set_ac97_info(NULL);
#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
pxa_set_camera_info(&pcm990_pxacamera_platform_data);
i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index a186994..e5eeb3a 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -449,6 +449,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_scoop_config = &poodle_pcmcia_config;
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 77c2693..2c1b0b7 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -322,9 +322,6 @@
static struct platform_device *pxa25x_devices[] __initdata = {
&pxa25x_device_udc,
- &pxa_device_ffuart,
- &pxa_device_btuart,
- &pxa_device_stuart,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa25x_device_ssp,
@@ -372,10 +369,8 @@
}
/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
- if (cpu_is_pxa255()) {
+ if (cpu_is_pxa255())
clks_register(&pxa25x_hwuart_clkreg, 1);
- ret = platform_device_register(&pxa_device_hwuart);
- }
return ret;
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index ec68cc1..6a0b731 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -364,9 +364,6 @@
static struct platform_device *devices[] __initdata = {
&pxa27x_device_udc,
- &pxa_device_ffuart,
- &pxa_device_btuart,
- &pxa_device_stuart,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 09b7b1a..fcb0721 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,6 +30,7 @@
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/ssp.h>
+#include <mach/regs-intc.h>
#include <plat/i2c.h>
#include "generic.h"
@@ -45,6 +46,9 @@
#define ACCR_D0CS (1 << 26)
#define ACCR_PCCE (1 << 11)
+#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
+#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
+
/* crystal frequency to static memory controller multiplier (SMCFS) */
static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
@@ -237,6 +241,7 @@
static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
@@ -261,6 +266,7 @@
INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
+ INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"),
INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
@@ -530,6 +536,43 @@
#define pxa3xx_set_wake NULL
#endif
+static void pxa_ack_ext_wakeup(unsigned int irq)
+{
+ PECR |= PECR_IS(irq - IRQ_WAKEUP0);
+}
+
+static void pxa_mask_ext_wakeup(unsigned int irq)
+{
+ ICMR2 &= ~(1 << ((irq - PXA_IRQ(0)) & 0x1f));
+ PECR &= ~PECR_IE(irq - IRQ_WAKEUP0);
+}
+
+static void pxa_unmask_ext_wakeup(unsigned int irq)
+{
+ ICMR2 |= 1 << ((irq - PXA_IRQ(0)) & 0x1f);
+ PECR |= PECR_IE(irq - IRQ_WAKEUP0);
+}
+
+static struct irq_chip pxa_ext_wakeup_chip = {
+ .name = "WAKEUP",
+ .ack = pxa_ack_ext_wakeup,
+ .mask = pxa_mask_ext_wakeup,
+ .unmask = pxa_unmask_ext_wakeup,
+};
+
+static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
+{
+ int irq;
+
+ for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
+ set_irq_chip(irq, &pxa_ext_wakeup_chip);
+ set_irq_handler(irq, handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ pxa_ext_wakeup_chip.set_wake = fn;
+}
+
void __init pxa3xx_init_irq(void)
{
/* enable CP6 access */
@@ -539,6 +582,7 @@
__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
pxa_init_irq(56, pxa3xx_set_wake);
+ pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
@@ -553,9 +597,6 @@
static struct platform_device *devices[] __initdata = {
&pxa27x_device_udc,
- &pxa_device_ffuart,
- &pxa_device_btuart,
- &pxa_device_stuart,
&pxa_device_i2s,
&sa1100_device_rtc,
&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 8241a63..115b6f2 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -22,9 +22,13 @@
#include <linux/i2c.h>
#include <linux/smc91x.h>
#include <linux/mfd/da903x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
#include <mach/pxa930.h>
#include <plat/i2c.h>
@@ -33,7 +37,7 @@
#include "devices.h"
#include "generic.h"
-#define GPIO_LCD_RESET (16)
+#define GPIO_LCD_RESET (16)
/* SAAR MFP configurations */
static mfp_cfg_t saar_mfp_cfg[] __initdata = {
@@ -56,6 +60,31 @@
/* Ethernet */
DF_nCS1_nCS3,
GPIO97_GPIO,
+
+ /* DFI */
+ DF_INT_RnB_ND_INT_RnB,
+ DF_nRE_nOE_ND_nRE,
+ DF_nWE_ND_nWE,
+ DF_CLE_nOE_ND_CLE,
+ DF_nADV1_ALE_ND_ALE,
+ DF_nADV2_ALE_nCS3,
+ DF_nCS0_ND_nCS0,
+ DF_IO0_ND_IO0,
+ DF_IO1_ND_IO1,
+ DF_IO2_ND_IO2,
+ DF_IO3_ND_IO3,
+ DF_IO4_ND_IO4,
+ DF_IO5_ND_IO5,
+ DF_IO6_ND_IO6,
+ DF_IO7_ND_IO7,
+ DF_IO8_ND_IO8,
+ DF_IO9_ND_IO9,
+ DF_IO10_ND_IO10,
+ DF_IO11_ND_IO11,
+ DF_IO12_ND_IO12,
+ DF_IO13_ND_IO13,
+ DF_IO14_ND_IO14,
+ DF_IO15_ND_IO15,
};
#define SAAR_ETH_PHYS (0x14000000)
@@ -451,10 +480,15 @@
#endif
#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct da9034_backlight_pdata saar_da9034_backlight = {
+ .output_current = 4, /* 4mA */
+};
+
static struct da903x_subdev_info saar_da9034_subdevs[] = {
[0] = {
.name = "da903x-backlight",
.id = DA9034_ID_WLED,
+ .platform_data = &saar_da9034_backlight,
},
};
@@ -480,12 +514,81 @@
#else
static inline void saar_init_i2c(void) {}
#endif
+
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+static struct mtd_partition saar_onenand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_8M,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (SZ_2M + SZ_1M),
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_48M,
+ .mask_flags = 0,
+ }
+};
+
+static struct onenand_platform_data saar_onenand_info = {
+ .parts = saar_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(saar_onenand_partitions),
+};
+
+#define SMC_CS0_PHYS_BASE (0x10000000)
+
+static struct resource saar_resource_onenand[] = {
+ [0] = {
+ .start = SMC_CS0_PHYS_BASE,
+ .end = SMC_CS0_PHYS_BASE + SZ_1M,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device saar_device_onenand = {
+ .name = "onenand-flash",
+ .id = -1,
+ .dev = {
+ .platform_data = &saar_onenand_info,
+ },
+ .resource = saar_resource_onenand,
+ .num_resources = ARRAY_SIZE(saar_resource_onenand),
+};
+
+static void __init saar_init_onenand(void)
+{
+ platform_device_register(&saar_device_onenand);
+}
+#else
+static void __init saar_init_onenand(void) {}
+#endif
+
static void __init saar_init(void)
{
/* initialize MFP configurations */
pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_device_register(&smc91x_device);
+ saar_init_onenand();
saar_init_i2c();
saar_init_lcd();
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 55259f4..1439785 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -42,8 +42,8 @@
#define MAX1111_BATT_TEMP 2u
#define MAX1111_ACIN_VOLT 6u
-extern struct battery_thresh spitz_battery_levels_acin[];
-extern struct battery_thresh spitz_battery_levels_noac[];
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
int sharpsl_pm_pxa_read_max1111(int channel);
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 629e05d..67229a1 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -78,7 +78,7 @@
-struct battery_thresh spitz_battery_levels_acin[] = {
+struct battery_thresh sharpsl_battery_levels_acin[] = {
{ 213, 100},
{ 212, 98},
{ 211, 95},
@@ -121,7 +121,7 @@
{ 0, 0},
};
-struct battery_thresh spitz_battery_levels_noac[] = {
+struct battery_thresh sharpsl_battery_levels_noac[] = {
{ 213, 100},
{ 212, 98},
{ 211, 95},
@@ -165,19 +165,20 @@
};
/* MAX1111 Commands */
-#define MAXCTRL_PD0 1u << 0
-#define MAXCTRL_PD1 1u << 1
-#define MAXCTRL_SGL 1u << 2
-#define MAXCTRL_UNI 1u << 3
+#define MAXCTRL_PD0 (1u << 0)
+#define MAXCTRL_PD1 (1u << 1)
+#define MAXCTRL_SGL (1u << 2)
+#define MAXCTRL_UNI (1u << 3)
#define MAXCTRL_SEL_SH 4
-#define MAXCTRL_STR 1u << 7
+#define MAXCTRL_STR (1u << 7)
/*
* Read MAX1111 ADC
*/
int sharpsl_pm_pxa_read_max1111(int channel)
{
- if (machine_is_tosa()) // Ugly, better move this function into another module
+ /* Ugly, better move this function into another module */
+ if (machine_is_tosa())
return 0;
#ifdef CONFIG_CORGI_SSP_DEPRECATED
@@ -238,7 +239,7 @@
static void sharpsl_battery_thread(struct work_struct *private_)
{
- int voltage, percent, apm_status, i = 0;
+ int voltage, percent, apm_status, i;
if (!sharpsl_pm.machinfo)
return;
@@ -250,15 +251,14 @@
&& time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL))
schedule_delayed_work(&toggle_charger, 0);
- while(1) {
+ for (i = 0; i < 5; i++) {
voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
- if (voltage > 0) break;
- if (i++ > 5) {
- voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
- dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+ if (voltage > 0)
break;
- }
+ }
+ if (voltage <= 0) {
+ voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+ dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
}
voltage = sharpsl_average_value(voltage);
@@ -266,8 +266,10 @@
percent = get_percentage(voltage);
/* At low battery voltages, the voltage has a tendency to start
- creeping back up so we try to avoid this here */
- if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) || percent <= sharpsl_pm.battstat.mainbat_percent) {
+ creeping back up so we try to avoid this here */
+ if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
+ || (apm_status == APM_BATTERY_STATUS_HIGH)
+ || percent <= sharpsl_pm.battstat.mainbat_percent) {
sharpsl_pm.battstat.mainbat_voltage = voltage;
sharpsl_pm.battstat.mainbat_status = apm_status;
sharpsl_pm.battstat.mainbat_percent = percent;
@@ -279,8 +281,8 @@
#ifdef CONFIG_BACKLIGHT_CORGI
/* If battery is low. limit backlight intensity to save power. */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
- (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+ && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
+ || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
sharpsl_pm.machinfo->backlight_limit(1);
sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
@@ -293,8 +295,8 @@
/* Suspend if critical battery level */
if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
- && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
- && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+ && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+ && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
dev_err(sharpsl_pm.dev, "Fatal Off\n");
apm_queue_event(APM_CRITICAL_SUSPEND);
@@ -346,7 +348,7 @@
static void sharpsl_charge_toggle(struct work_struct *private_)
{
- dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+ dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
sharpsl_charge_off();
@@ -368,7 +370,7 @@
{
int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
- dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+ dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
sharpsl_average_clear();
if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
@@ -472,14 +474,14 @@
sharpsl_ad[sharpsl_ad_index] = ad;
sharpsl_ad_index++;
if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
- for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+ for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
sharpsl_ad[i] = sharpsl_ad[i+1];
sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
}
- for (i=0; i < sharpsl_ad_index; i++)
+ for (i = 0; i < sharpsl_ad_index; i++)
ad_val += sharpsl_ad[i];
- return (ad_val / sharpsl_ad_index);
+ return ad_val / sharpsl_ad_index;
}
/*
@@ -492,8 +494,8 @@
/* Find MAX val */
temp = val[0];
- j=0;
- for (i=1; i<5; i++) {
+ j = 0;
+ for (i = 1; i < 5; i++) {
if (temp < val[i]) {
temp = val[i];
j = i;
@@ -502,21 +504,21 @@
/* Find MIN val */
temp = val[4];
- k=4;
- for (i=3; i>=0; i--) {
+ k = 4;
+ for (i = 3; i >= 0; i--) {
if (temp > val[i]) {
temp = val[i];
k = i;
}
}
- for (i=0; i<5; i++)
- if (i != j && i != k )
+ for (i = 0; i < 5; i++)
+ if (i != j && i != k)
sum += val[i];
dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
- return (sum/3);
+ return sum/3;
}
static int sharpsl_check_battery_temp(void)
@@ -524,7 +526,7 @@
int val, i, buff[5];
/* Check battery temperature */
- for (i=0; i<5; i++) {
+ for (i = 0; i < 5; i++) {
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
sharpsl_pm.machinfo->measure_temp(1);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
@@ -557,7 +559,7 @@
sharpsl_pm.machinfo->discharge1(1);
/* Check battery voltage */
- for (i=0; i<5; i++) {
+ for (i = 0; i < 5; i++) {
buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
}
@@ -581,16 +583,16 @@
{
int temp, i, buff[5];
- for (i=0; i<5; i++) {
+ for (i = 0; i < 5; i++) {
buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
}
temp = get_select_val(buff);
- dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+ dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
- dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+ dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
return -1;
}
@@ -624,9 +626,9 @@
static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
{
- dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+ dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
- dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+ dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
/* not charging and AC-IN! */
if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
@@ -644,12 +646,12 @@
if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
RTSR &= RTSR_ALE;
RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
- dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+ dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
} else if (alarm_enable) {
RTSR &= RTSR_ALE;
RTAR = alarm_time;
- dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+ dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
} else {
dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
}
@@ -658,19 +660,18 @@
sharpsl_pm.machinfo->postsuspend();
- dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+ dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
}
static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
{
- if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
- {
+ if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
corgi_goto_sleep(alarm_time, alarm_enable, state);
return 1;
}
- if(sharpsl_off_charge_battery()) {
+ if (sharpsl_off_charge_battery()) {
dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
corgi_goto_sleep(alarm_time, alarm_enable, state);
return 1;
@@ -697,7 +698,7 @@
corgi_goto_sleep(alarm_time, alarm_status, state);
- while (corgi_enter_suspend(alarm_time,alarm_status,state))
+ while (corgi_enter_suspend(alarm_time, alarm_status, state))
{}
if (sharpsl_pm.machinfo->earlyresume)
@@ -732,7 +733,7 @@
sharpsl_pm.machinfo->discharge1(1);
/* Check battery : check inserting battery ? */
- for (i=0; i<5; i++) {
+ for (i = 0; i < 5; i++) {
buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
}
@@ -812,7 +813,7 @@
mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
time = RCNR;
- while(1) {
+ while (1) {
/* Check if any wakeup event had occurred */
if (sharpsl_pm.machinfo->charger_wakeup() != 0)
return 0;
@@ -835,9 +836,9 @@
mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
time = RCNR;
- while(1) {
+ while (1) {
/* Check if any wakeup event had occurred */
- if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+ if (sharpsl_pm.machinfo->charger_wakeup())
return 0;
/* Check for timeout */
if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
@@ -864,12 +865,12 @@
static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+ return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
}
static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+ return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
}
static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
@@ -943,8 +944,7 @@
}
}
- if (sharpsl_pm.machinfo->batfull_irq)
- {
+ if (sharpsl_pm.machinfo->batfull_irq) {
/* Register interrupt handler. */
if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d98023f..4b50f14 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -768,6 +768,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
spitz_init_spi();
platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 724ffb0..fc5a70c 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -103,7 +103,7 @@
PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
- PKSR = 0xffffffff; // clear
+ PKSR = 0xffffffff; /* clear */
/* nRESET_OUT Disable */
PSLR |= PSLR_SL_ROD;
@@ -149,7 +149,7 @@
if (resume_on_alarm && (PEDR & PWER_RTC))
is_resume |= PWER_RTC;
- dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
+ dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
return is_resume;
}
@@ -160,7 +160,7 @@
unsigned long spitzpm_read_devdata(int type)
{
- switch(type) {
+ switch (type) {
case SHARPSL_STATUS_ACIN:
return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
case SHARPSL_STATUS_LOCK:
@@ -199,7 +199,7 @@
#if defined(CONFIG_LCD_CORGI)
.backlight_limit = corgi_lcd_limit_intensity,
#elif defined(CONFIG_BACKLIGHT_CORGI)
- .backlight_limit = corgibl_limit_intensity,
+ .backlight_limit = corgibl_limit_intensity,
#endif
.charge_on_volt = SHARPSL_CHARGE_ON_VOLT,
.charge_on_temp = SHARPSL_CHARGE_ON_TEMP,
@@ -208,8 +208,8 @@
.fatal_acin_volt = SHARPSL_FATAL_ACIN_VOLT,
.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
.bat_levels = 40,
- .bat_levels_noac = spitz_battery_levels_noac,
- .bat_levels_acin = spitz_battery_levels_acin,
+ .bat_levels_noac = sharpsl_battery_levels_noac,
+ .bat_levels_acin = sharpsl_battery_levels_acin,
.status_high_acin = 188,
.status_low_acin = 178,
.status_high_noac = 185,
@@ -241,7 +241,7 @@
static void spitzpm_exit(void)
{
- platform_device_unregister(spitzpm_device);
+ platform_device_unregister(spitzpm_device);
}
module_init(spitzpm_init);
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 965e38c..9ebe658 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -342,8 +342,9 @@
}
EXPORT_SYMBOL(ssp_free);
-static int __devinit ssp_probe(struct platform_device *pdev, int type)
+static int __devinit ssp_probe(struct platform_device *pdev)
{
+ const struct platform_device_id *id = platform_get_device_id(pdev);
struct resource *res;
struct ssp_device *ssp;
int ret = 0;
@@ -413,7 +414,7 @@
*/
ssp->port_id = pdev->id + 1;
ssp->use_count = 0;
- ssp->type = type;
+ ssp->type = (int)id->driver_data;
mutex_lock(&ssp_lock);
list_add(&ssp->node, &ssp_list);
@@ -457,75 +458,31 @@
return 0;
}
-static int __devinit pxa25x_ssp_probe(struct platform_device *pdev)
-{
- return ssp_probe(pdev, PXA25x_SSP);
-}
-
-static int __devinit pxa25x_nssp_probe(struct platform_device *pdev)
-{
- return ssp_probe(pdev, PXA25x_NSSP);
-}
-
-static int __devinit pxa27x_ssp_probe(struct platform_device *pdev)
-{
- return ssp_probe(pdev, PXA27x_SSP);
-}
-
-static struct platform_driver pxa25x_ssp_driver = {
- .driver = {
- .name = "pxa25x-ssp",
- },
- .probe = pxa25x_ssp_probe,
- .remove = __devexit_p(ssp_remove),
+static const struct platform_device_id ssp_id_table[] = {
+ { "pxa25x-ssp", PXA25x_SSP },
+ { "pxa25x-nssp", PXA25x_NSSP },
+ { "pxa27x-ssp", PXA27x_SSP },
+ { },
};
-static struct platform_driver pxa25x_nssp_driver = {
- .driver = {
- .name = "pxa25x-nssp",
- },
- .probe = pxa25x_nssp_probe,
+static struct platform_driver ssp_driver = {
+ .probe = ssp_probe,
.remove = __devexit_p(ssp_remove),
-};
-
-static struct platform_driver pxa27x_ssp_driver = {
.driver = {
- .name = "pxa27x-ssp",
+ .owner = THIS_MODULE,
+ .name = "pxa2xx-ssp",
},
- .probe = pxa27x_ssp_probe,
- .remove = __devexit_p(ssp_remove),
+ .id_table = ssp_id_table,
};
static int __init pxa_ssp_init(void)
{
- int ret = 0;
-
- ret = platform_driver_register(&pxa25x_ssp_driver);
- if (ret) {
- printk(KERN_ERR "failed to register pxa25x_ssp_driver");
- return ret;
- }
-
- ret = platform_driver_register(&pxa25x_nssp_driver);
- if (ret) {
- printk(KERN_ERR "failed to register pxa25x_nssp_driver");
- return ret;
- }
-
- ret = platform_driver_register(&pxa27x_ssp_driver);
- if (ret) {
- printk(KERN_ERR "failed to register pxa27x_ssp_driver");
- return ret;
- }
-
- return ret;
+ return platform_driver_register(&ssp_driver);
}
static void __exit pxa_ssp_exit(void)
{
- platform_driver_unregister(&pxa25x_ssp_driver);
- platform_driver_unregister(&pxa25x_nssp_driver);
- platform_driver_unregister(&pxa27x_ssp_driver);
+ platform_driver_unregister(&ssp_driver);
}
arch_initcall(pxa_ssp_init);
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3b205b6..a98a434 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -760,6 +760,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/* spi chip selects */
gpio_direction_output(37, 0);
gpio_direction_output(24, 0);
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index b75353a..f02dcb5 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -477,6 +477,10 @@
/* initialize MFP configurations */
pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
platform_device_register(&smc91x_device);
tavorevb_init_lcd();
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index e81a526..c854c16 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -825,6 +825,11 @@
int dummy;
pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
+
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
deleted file mode 100644
index fe08507..0000000
--- a/arch/arm/mach-pxa/treo680.c
+++ /dev/null
@@ -1,519 +0,0 @@
-/*
- * Hardware definitions for Palm Treo 680
- *
- * Author: Tomas Cech <sleep_walker@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
-#include <linux/power_supply.h>
-#include <linux/sysdev.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/audio.h>
-#include <mach/treo680.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/ohci.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/palmasoc.h>
-#include <mach/camera.h>
-
-#include <sound/pxa2xx-lib.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long treo680_pin_config[] __initdata = {
- /* MMC */
- GPIO32_MMC_CLK,
- GPIO92_MMC_DAT_0,
- GPIO109_MMC_DAT_1,
- GPIO110_MMC_DAT_2,
- GPIO111_MMC_DAT_3,
- GPIO112_MMC_CMD,
- GPIO33_GPIO, /* SD read only */
- GPIO113_GPIO, /* SD detect */
-
- /* AC97 */
- GPIO28_AC97_BITCLK,
- GPIO29_AC97_SDATA_IN_0,
- GPIO30_AC97_SDATA_OUT,
- GPIO31_AC97_SYNC,
- GPIO89_AC97_SYSCLK,
- GPIO95_AC97_nRESET,
-
- /* IrDA */
- GPIO46_FICP_RXD,
- GPIO47_FICP_TXD,
-
- /* PWM */
- GPIO16_PWM0_OUT,
-
- /* USB */
- GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, /* usb detect */
-
- /* MATRIX KEYPAD */
- GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
- GPIO101_KP_MKIN_1,
- GPIO102_KP_MKIN_2,
- GPIO97_KP_MKIN_3,
- GPIO98_KP_MKIN_4,
- GPIO99_KP_MKIN_5,
- GPIO91_KP_MKIN_6,
- GPIO13_KP_MKIN_7,
- GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
- GPIO104_KP_MKOUT_1,
- GPIO105_KP_MKOUT_2,
- GPIO106_KP_MKOUT_3,
- GPIO107_KP_MKOUT_4,
- GPIO108_KP_MKOUT_5,
- GPIO96_KP_MKOUT_6,
- GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH, /* Hotsync button */
-
- /* LCD */
- GPIO58_LCD_LDD_0,
- GPIO59_LCD_LDD_1,
- GPIO60_LCD_LDD_2,
- GPIO61_LCD_LDD_3,
- GPIO62_LCD_LDD_4,
- GPIO63_LCD_LDD_5,
- GPIO64_LCD_LDD_6,
- GPIO65_LCD_LDD_7,
- GPIO66_LCD_LDD_8,
- GPIO67_LCD_LDD_9,
- GPIO68_LCD_LDD_10,
- GPIO69_LCD_LDD_11,
- GPIO70_LCD_LDD_12,
- GPIO71_LCD_LDD_13,
- GPIO72_LCD_LDD_14,
- GPIO73_LCD_LDD_15,
- GPIO74_LCD_FCLK,
- GPIO75_LCD_LCLK,
- GPIO76_LCD_PCLK,
-
- /* Quick Capture Interface */
- GPIO84_CIF_FV,
- GPIO85_CIF_LV,
- GPIO53_CIF_MCLK,
- GPIO54_CIF_PCLK,
- GPIO81_CIF_DD_0,
- GPIO55_CIF_DD_1,
- GPIO51_CIF_DD_2,
- GPIO50_CIF_DD_3,
- GPIO52_CIF_DD_4,
- GPIO48_CIF_DD_5,
- GPIO17_CIF_DD_6,
- GPIO12_CIF_DD_7,
-
- /* I2C */
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
-
- /* GSM */
- GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH, /* GSM host wake up */
- GPIO34_FFUART_RXD,
- GPIO35_FFUART_CTS,
- GPIO39_FFUART_TXD,
- GPIO41_FFUART_RTS,
-
- /* MISC. */
- GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* external power detect */
- GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* silent switch */
- GPIO116_GPIO, /* headphone detect */
- GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth host wake up */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data treo680_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .gpio_card_detect = GPIO_NR_TREO680_SD_DETECT_N,
- .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY,
- .gpio_power = GPIO_NR_TREO680_SD_POWER,
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-static unsigned int treo680_matrix_keys[] = {
- KEY(0, 0, KEY_F8), /* Red/Off/Power */
- KEY(0, 1, KEY_LEFT),
- KEY(0, 2, KEY_LEFTCTRL), /* Alternate */
- KEY(0, 3, KEY_L),
- KEY(0, 4, KEY_A),
- KEY(0, 5, KEY_Q),
- KEY(0, 6, KEY_P),
-
- KEY(1, 0, KEY_RIGHTCTRL), /* Menu */
- KEY(1, 1, KEY_RIGHT),
- KEY(1, 2, KEY_LEFTSHIFT), /* Left shift */
- KEY(1, 3, KEY_Z),
- KEY(1, 4, KEY_S),
- KEY(1, 5, KEY_W),
-
- KEY(2, 0, KEY_F1), /* Phone */
- KEY(2, 1, KEY_UP),
- KEY(2, 2, KEY_0),
- KEY(2, 3, KEY_X),
- KEY(2, 4, KEY_D),
- KEY(2, 5, KEY_E),
-
- KEY(3, 0, KEY_F10), /* Calendar */
- KEY(3, 1, KEY_DOWN),
- KEY(3, 2, KEY_SPACE),
- KEY(3, 3, KEY_C),
- KEY(3, 4, KEY_F),
- KEY(3, 5, KEY_R),
-
- KEY(4, 0, KEY_F12), /* Mail */
- KEY(4, 1, KEY_KPENTER),
- KEY(4, 2, KEY_RIGHTALT), /* Alt */
- KEY(4, 3, KEY_V),
- KEY(4, 4, KEY_G),
- KEY(4, 5, KEY_T),
-
- KEY(5, 0, KEY_F9), /* Home */
- KEY(5, 1, KEY_PAGEUP), /* Side up */
- KEY(5, 2, KEY_DOT),
- KEY(5, 3, KEY_B),
- KEY(5, 4, KEY_H),
- KEY(5, 5, KEY_Y),
-
- KEY(6, 0, KEY_TAB), /* Side Activate */
- KEY(6, 1, KEY_PAGEDOWN), /* Side down */
- KEY(6, 2, KEY_ENTER),
- KEY(6, 3, KEY_N),
- KEY(6, 4, KEY_J),
- KEY(6, 5, KEY_U),
-
- KEY(7, 0, KEY_F6), /* Green/Call */
- KEY(7, 1, KEY_O),
- KEY(7, 2, KEY_BACKSPACE),
- KEY(7, 3, KEY_M),
- KEY(7, 4, KEY_K),
- KEY(7, 5, KEY_I),
-};
-
-static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
- .matrix_key_rows = 8,
- .matrix_key_cols = 7,
- .matrix_key_map = treo680_matrix_keys,
- .matrix_key_map_size = ARRAY_SIZE(treo680_matrix_keys),
- .direct_key_map = { KEY_CONNECT },
- .direct_key_num = 1,
-
- .debounce_interval = 30,
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-
-static pxa2xx_audio_ops_t treo680_ac97_pdata = {
- .reset_gpio = 95,
-};
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int treo680_backlight_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER");
- if (ret)
- goto err;
- ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
- if (ret)
- goto err2;
-
- return 0;
-
-err2:
- gpio_free(GPIO_NR_TREO680_BL_POWER);
-err:
- return ret;
-}
-
-static int treo680_backlight_notify(int brightness)
-{
- gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness);
- return TREO680_MAX_INTENSITY - brightness;
-};
-
-static void treo680_backlight_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_TREO680_BL_POWER);
-}
-
-static struct platform_pwm_backlight_data treo680_backlight_data = {
- .pwm_id = 0,
- .max_brightness = TREO680_MAX_INTENSITY,
- .dft_brightness = TREO680_DEFAULT_INTENSITY,
- .pwm_period_ns = TREO680_PERIOD_NS,
- .init = treo680_backlight_init,
- .notify = treo680_backlight_notify,
- .exit = treo680_backlight_exit,
-};
-
-static struct platform_device treo680_backlight = {
- .name = "pwm-backlight",
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &treo680_backlight_data,
- },
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data treo680_ficp_info = {
- .gpio_pwdown = GPIO_NR_TREO680_IR_EN,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = {
- .gpio_vbus = GPIO_NR_TREO680_USB_DETECT,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_TREO680_USB_PULLUP,
-};
-
-
-/******************************************************************************
- * USB host
- ******************************************************************************/
-static struct pxaohci_platform_data treo680_ohci_info = {
- .port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 | ENABLE_PORT3,
- .power_budget = 0,
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC");
- if (ret)
- goto err1;
- ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT);
- if (ret)
- goto err2;
-
- return 0;
-
-err2:
- gpio_free(GPIO_NR_TREO680_POWER_DETECT);
-err1:
- return ret;
-}
-
-static int treo680_is_ac_online(void)
-{
- return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
- gpio_free(GPIO_NR_TREO680_POWER_DETECT);
-}
-
-static char *treo680_supplicants[] = {
- "main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = treo680_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = treo680_supplicants,
- .num_supplicants = ARRAY_SIZE(treo680_supplicants),
-};
-
-static struct platform_device power_supply = {
- .name = "pda-power",
- .id = -1,
- .dev = {
- .platform_data = &power_supply_info,
- },
-};
-
-/******************************************************************************
- * Vibra and LEDs
- ******************************************************************************/
-static struct gpio_led gpio_leds[] = {
- {
- .name = "treo680:vibra:vibra",
- .default_trigger = "none",
- .gpio = GPIO_NR_TREO680_VIBRATE_EN,
- },
- {
- .name = "treo680:green:led",
- .default_trigger = "mmc0",
- .gpio = GPIO_NR_TREO680_GREEN_LED,
- },
- {
- .name = "treo680:keybbl:keybbl",
- .default_trigger = "none",
- .gpio = GPIO_NR_TREO680_KEYB_BL,
- },
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device treo680_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
- }
-};
-
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-/* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo680_lcd_modes[] = {
-{
- .pixclock = 86538,
- .xres = 320,
- .yres = 320,
- .bpp = 16,
-
- .left_margin = 20,
- .right_margin = 8,
- .upper_margin = 8,
- .lower_margin = 5,
-
- .hsync_len = 4,
- .vsync_len = 1,
-},
-};
-
-static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
-{
- gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
-}
-
-static struct pxafb_mach_info treo680_lcd_screen = {
- .modes = treo680_lcd_modes,
- .num_modes = ARRAY_SIZE(treo680_lcd_modes),
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init treo680_pm_init(void)
-{
- static u32 resume[] = {
- 0xe3a00101, /* mov r0, #0x40000000 */
- 0xe380060f, /* orr r0, r0, #0x00f00000 */
- 0xe590f008, /* ldr pc, [r0, #0x08] */
- };
-
- /* this is where the bootloader jumps */
- memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume));
-}
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
- &treo680_backlight,
- &treo680_leds,
- &power_supply,
-};
-
-/* setup udc GPIOs initial state */
-static void __init treo680_udc_init(void)
-{
- if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1);
- gpio_free(GPIO_NR_TREO680_USB_PULLUP);
- }
-}
-
-static void __init treo680_lcd_power_init(void)
-{
- int ret;
-
- ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
- if (ret) {
- pr_err("Treo680: LCD power GPIO request failed!\n");
- return;
- }
-
- ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
- if (ret) {
- pr_err("Treo680: setting LCD power GPIO direction failed!\n");
- gpio_free(GPIO_NR_TREO680_LCD_POWER);
- return;
- }
-
- treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
-}
-
-static void __init treo680_init(void)
-{
- treo680_pm_init();
- pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
- pxa_set_keypad_info(&treo680_keypad_platform_data);
- treo680_lcd_power_init();
- set_pxa_fb_info(&treo680_lcd_screen);
- pxa_set_mci_info(&treo680_mci_platform_data);
- treo680_udc_init();
- pxa_set_udc_info(&treo680_udc_info);
- pxa_set_ac97_info(&treo680_ac97_pdata);
- pxa_set_ficp_info(&treo680_ficp_info);
- pxa_set_ohci_info(&treo680_ohci_info);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(TREO680, "Palm Treo 680")
- .phys_io = TREO680_PHYS_IO_START,
- .io_pg_offst = io_p2v(0x40000000),
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa27x_init_irq,
- .timer = &pxa_timer,
- .init_machine = treo680_init,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 3981e03..0aa858e 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -524,6 +524,10 @@
ARRAY_SIZE(trizeps4_devices));
}
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
if (0) /* dont know how to determine LCD */
set_pxa_fb_info(&sharp_lcd);
else
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d33c232..cf0d71b 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -301,15 +301,6 @@
set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
viper_irq_handler);
set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-
-#ifndef CONFIG_SERIAL_PXA
- /*
- * 8250 doesn't support IRQ_TYPE being passed as part
- * of the plat_serial8250_port structure...
- */
- set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
- set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
-#endif
}
/* Flat Panel */
@@ -539,6 +530,7 @@
{
.mapbase = VIPER_UARTA_PHYS,
.irq = gpio_to_irq(VIPER_UARTA_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
.iotype = UPIO_MEM,
@@ -548,6 +540,7 @@
{
.mapbase = VIPER_UARTB_PHYS,
.irq = gpio_to_irq(VIPER_UARTB_GPIO),
+ .irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
.iotype = UPIO_MEM,
@@ -908,6 +901,10 @@
pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/* Wake-up serial console */
viper_init_serial_gpio();
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 3fd79cb..d3b4e3f 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -165,6 +165,11 @@
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+ pxa_set_hwuart_info(NULL);
+
/* See Intel XScale Developer's Guide for details */
/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
MSC1 = (MSC1 & 0xffff) | 0xD5540000;
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 09784d3..b66e9e2 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -31,7 +31,7 @@
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
#include "devices.h"
#include "generic.h"
@@ -444,6 +444,10 @@
static void __init zylonite_init(void)
{
+ pxa_set_ffuart_info(NULL);
+ pxa_set_btuart_info(NULL);
+ pxa_set_stuart_info(NULL);
+
/* board-processor specific initialization */
zylonite_pxa300_init();
zylonite_pxa320_init();
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
index 1535540..3fd8892 100644
--- a/arch/arm/mach-s3c2400/include/mach/map.h
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2400/include/mach/map.h
*
- * Copyright 2003,2007 Simtec Electronics
+ * Copyright 2003-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3d4e9da..dd1fcc7 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -81,6 +81,14 @@
help
Say Y here if you are using the HP IPAQ H1940
+config H1940BT
+ tristate "Control the state of H1940 bluetooth chip"
+ depends on ARCH_H1940
+ select RFKILL
+ help
+ This is a simple driver that is able to control
+ the state of built in bluetooth chip on h1940.
+
config PM_H1940
bool
help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 2ab5ba4..0d468e9 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -21,7 +21,8 @@
# Machine support
obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940) += mach-h1940.o h1940-bluetooth.o
+obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
+obj-$(CONFIG_H1940BT) += h1940-bluetooth.o
obj-$(CONFIG_PM_H1940) += pm-h1940.o
obj-$(CONFIG_MACH_N30) += mach-n30.o
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 9a37c87..217b102 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/bast-irq.c
*
- * Copyright (c) 2003,2005 Simtec Electronics
+ * Copyright 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.simtec.co.uk/products/EB2410ITX/
@@ -141,7 +141,7 @@
unsigned int i;
if (machine_is_bast()) {
- printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n");
+ printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
/* zap all the IRQs */
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 9d11868..75189df 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/cpu-freq.c
*
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5aabf11..b7d1f8d 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -17,6 +17,7 @@
#include <linux/ctype.h>
#include <linux/leds.h>
#include <linux/gpio.h>
+#include <linux/rfkill.h>
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
@@ -24,21 +25,10 @@
#define DRV_NAME "h1940-bt"
-#ifdef CONFIG_LEDS_H1940
-DEFINE_LED_TRIGGER(bt_led_trigger);
-#endif
-
-static int state;
-
/* Bluetooth control */
static void h1940bt_enable(int on)
{
if (on) {
-#ifdef CONFIG_LEDS_H1940
- /* flashing Blue */
- led_trigger_event(bt_led_trigger, LED_HALF);
-#endif
-
/* Power on the chip */
h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
/* Reset the chip */
@@ -46,48 +36,31 @@
s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
-
- state = 1;
}
else {
-#ifdef CONFIG_LEDS_H1940
- led_trigger_event(bt_led_trigger, 0);
-#endif
-
s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
mdelay(10);
h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
-
- state = 0;
}
}
-static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+static int h1940bt_set_block(void *data, bool blocked)
{
- return snprintf(buf, PAGE_SIZE, "%d\n", state);
+ h1940bt_enable(!blocked);
+ return 0;
}
-static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
- int new_state;
- char *endp;
-
- new_state = simple_strtoul(buf, &endp, 0);
- if (*endp && !isspace(*endp))
- return -EINVAL;
-
- h1940bt_enable(new_state);
-
- return count;
-}
-static DEVICE_ATTR(enable, 0644,
- h1940bt_show,
- h1940bt_store);
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+ .set_block = h1940bt_set_block,
+};
static int __init h1940bt_probe(struct platform_device *pdev)
{
+ struct rfkill *rfk;
+ int ret = 0;
+
/* Configures BT serial port GPIOs */
s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
@@ -98,21 +71,44 @@
s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
-#ifdef CONFIG_LEDS_H1940
- led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
-#endif
- /* disable BT by default */
- h1940bt_enable(0);
+ rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+ &h1940bt_rfkill_ops, NULL);
+ if (!rfk) {
+ ret = -ENOMEM;
+ goto err_rfk_alloc;
+ }
- return device_create_file(&pdev->dev, &dev_attr_enable);
+ rfkill_set_led_trigger_name(rfk, "h1940-bluetooth");
+
+ ret = rfkill_register(rfk);
+ if (ret)
+ goto err_rfkill;
+
+ platform_set_drvdata(pdev, rfk);
+
+ return 0;
+
+err_rfkill:
+ rfkill_destroy(rfk);
+err_rfk_alloc:
+ return ret;
}
static int h1940bt_remove(struct platform_device *pdev)
{
-#ifdef CONFIG_LEDS_H1940
- led_trigger_unregister_simple(bt_led_trigger);
-#endif
+ struct rfkill *rfk = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ if (rfk) {
+ rfkill_unregister(rfk);
+ rfkill_destroy(rfk);
+ }
+ rfk = NULL;
+
+ h1940bt_enable(0);
+
return 0;
}
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
index 20493b0..bee2a7a 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* BAST - CPLD control constants
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
index 501c202..cac428c 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Machine BAST - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
index c2c5baf..6e7dc9d 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2410/include/mach/bast-map.h
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Machine BAST - Memory map definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
index 61684cb..4c38b39 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* Vincent Sanders <vince@simtec.co.uk>
*
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 92e2687..08ac5f9 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2410/include/mach/dma.h
*
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C24XX DMA support
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index 801dff1..035a493 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
*
- * Copyright (c) 2003,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - hardware
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
index 639eff5..17380f8 100644
--- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
*
- * (c) 2005 Simtec Electronics
+ * Copyright 2005 Simtec Electronics
* http://www.simtec.co.uk/products/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index 2a5d90e..9a0d169 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
/* arch/arm/mach-s3c2410/include/mach/regs-clock.h
*
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index f6e8eec..ebc85c6 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1,7 +1,7 @@
/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
*
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
index 2d36353..4932b87 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-power.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -1,7 +1,7 @@
/* arch/arm/mach-s3c2410/include/mach/regs-power.h
*
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index c943210..72f756c 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,7 +1,6 @@
-
/* arch/arm/mach-s3c2410/include/mach/uncompress.h
*
- * Copyright (c) 2003, 2007 Simtec Electronics
+ * Copyright (c) 2003-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
index f53f85b..47add13 100644
--- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Machine VR1000 - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 647c9ad..4c79ac8 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/mach-bast.c
*
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.simtec.co.uk/products/EB2410ITX/
@@ -61,11 +61,12 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/cpu-freq.h>
+#include <plat/audio-simtec.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
-#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
/* macros for virtual address mods for the io space entries */
#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -247,7 +248,7 @@
static int chip1_map[] = { 2 };
static int chip2_map[] = { 3 };
-static struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition __initdata bast_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
@@ -273,7 +274,7 @@
* socket.
*/
-static struct s3c2410_nand_set bast_nand_sets[] = {
+static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
[0] = {
.name = "SmartMedia",
.nr_chips = 1,
@@ -323,7 +324,7 @@
__raw_writeb(tmp, BAST_VA_CTRL2);
}
-static struct s3c2410_platform_nand bast_nand_info = {
+static struct s3c2410_platform_nand __initdata bast_nand_info = {
.tacls = 30,
.twrph0 = 60,
.twrph1 = 60,
@@ -608,6 +609,11 @@
.need_io = 1,
};
+static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
+ .have_mic = 1,
+ .have_lout = 1,
+};
+
static void __init bast_map_io(void)
{
/* initialise the clocks */
@@ -625,7 +631,6 @@
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
- s3c_device_nand.dev.platform_data = &bast_nand_info;
s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
@@ -639,6 +644,7 @@
sysdev_register(&bast_pm_sysdev);
s3c_i2c0_set_platdata(&bast_i2c_info);
+ s3c_nand_set_platdata(&bast_nand_info);
s3c24xx_fb_set_platdata(&bast_fb_info);
platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
@@ -647,6 +653,7 @@
usb_simtec_init();
nor_simtec_init();
+ simtec_audio_add(NULL, true, &bast_audio);
s3c_cpufreq_setboard(&bast_cpufreq);
}
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index d9cd5dd..4905325 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -21,6 +21,11 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <video/platform_lcd.h>
+
+#include <linux/mmc/host.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -32,9 +37,12 @@
#include <plat/regs-serial.h>
#include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-fns.h>
+#include <mach/gpio-nrs.h>
+
#include <mach/h1940.h>
#include <mach/h1940-latch.h>
#include <mach/fb.h>
@@ -46,6 +54,7 @@
#include <plat/cpu.h>
#include <plat/pll.h>
#include <plat/pm.h>
+#include <plat/mci.h>
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
@@ -171,16 +180,90 @@
.gpdup_mask= 0xffffffff,
};
-static struct platform_device s3c_device_leds = {
+static struct platform_device h1940_device_leds = {
.name = "h1940-leds",
.id = -1,
};
-static struct platform_device s3c_device_bluetooth = {
+static struct platform_device h1940_device_bluetooth = {
.name = "h1940-bt",
.id = -1,
};
+static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+ .gpio_detect = S3C2410_GPF(5),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .set_power = NULL,
+ .ocr_avail = MMC_VDD_32_33,
+};
+
+static int h1940_backlight_init(struct device *dev)
+{
+ gpio_request(S3C2410_GPB(0), "Backlight");
+
+ s3c2410_gpio_setpin(S3C2410_GPB(0), 0);
+ s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+
+ return 0;
+}
+
+static void h1940_backlight_exit(struct device *dev)
+{
+ s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 100,
+ .dft_brightness = 50,
+ /* tcnt = 0x31 */
+ .pwm_period_ns = 36296,
+ .init = h1940_backlight_init,
+ .exit = h1940_backlight_exit,
+};
+
+static struct platform_device h1940_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[0].dev,
+ .platform_data = &backlight_data,
+ },
+ .id = -1,
+};
+
+static void h1940_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ int value;
+
+ if (!power) {
+ /* set to 3ec */
+ s3c2410_gpio_setpin(S3C2410_GPC(0), 0);
+ /* wait for 3ac */
+ do {
+ value = s3c2410_gpio_getpin(S3C2410_GPC(6));
+ } while (value);
+ /* set to 38c */
+ s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+ } else {
+ /* Set to 3ac */
+ s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+ /* Set to 3ad */
+ s3c2410_gpio_setpin(S3C2410_GPC(0), 1);
+ }
+}
+
+static struct plat_lcd_data h1940_lcd_power_data = {
+ .set_power = h1940_lcd_power_set,
+};
+
+static struct platform_device h1940_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_lcd.dev,
+ .dev.platform_data = &h1940_lcd_power_data,
+};
+
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
@@ -188,8 +271,13 @@
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usbgadget,
- &s3c_device_leds,
- &s3c_device_bluetooth,
+ &h1940_device_leds,
+ &h1940_device_bluetooth,
+ &s3c_device_sdi,
+ &s3c_device_rtc,
+ &s3c_device_timer[0],
+ &h1940_backlight,
+ &h1940_lcd_powerdev,
};
static void __init h1940_map_io(void)
@@ -219,6 +307,8 @@
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
s3c_i2c0_set_platdata(NULL);
+ s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
+
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
@@ -231,6 +321,11 @@
| (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
writel(tmp, S3C2410_UPLLCON);
+ gpio_request(S3C2410_GPC(0), "LCD power");
+ gpio_request(S3C2410_GPC(5), "LCD power");
+ gpio_request(S3C2410_GPC(6), "LCD power");
+
+
platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
}
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0f6ed61..0405712 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -338,7 +338,7 @@
&n35_button_device,
};
-static struct s3c2410_platform_i2c n30_i2ccfg = {
+static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
.flags = 0,
.slave_addr = 0x10,
.frequency = 10*1000,
@@ -500,8 +500,8 @@
static void __init n30_init(void)
{
s3c24xx_fb_set_platdata(&n30_fb_info);
- s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
s3c24xx_udc_set_platdata(&n30_udc_cfg);
+ s3c_i2c0_set_platdata(&n30_i2ccfg);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 2cc9849..ab092bc 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -258,7 +258,7 @@
&qt2410_led,
};
-static struct mtd_partition qt2410_nand_part[] = {
+static struct mtd_partition __initdata qt2410_nand_part[] = {
[0] = {
.name = "U-Boot",
.size = 0x30000,
@@ -286,7 +286,7 @@
},
};
-static struct s3c2410_nand_set qt2410_nand_sets[] = {
+static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
[0] = {
.name = "NAND",
.nr_chips = 1,
@@ -299,7 +299,7 @@
* chips and beyond.
*/
-static struct s3c2410_platform_nand qt2410_nand_info = {
+static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
.tacls = 20,
.twrph0 = 60,
.twrph1 = 20,
@@ -331,7 +331,7 @@
static void __init qt2410_machine_init(void)
{
- s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+ s3c_nand_set_platdata(&qt2410_nand_info);
switch (tft_type) {
case 'p': /* production */
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 1628cc7..0d61fb5 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/mach-vr1000.c
*
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright (c) 2003-2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Machine support for Thorcom VR1000 board. Designed for Thorcom by
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/iic.h>
+#include <plat/audio-simtec.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
@@ -393,6 +394,7 @@
ARRAY_SIZE(vr1000_i2c_devs));
nor_simtec_init();
+ simtec_audio_add(NULL, true, NULL);
}
MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index f178c2f..8338865 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2410/pll.c
*
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
* Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 50e25fc..6b9d0d8 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/usb-simtec.c
*
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.simtec.co.uk/products/EB2410ITX/
@@ -108,7 +108,7 @@
{
int ret;
- printk("USB Power Control, (c) 2004 Simtec Electronics\n");
+ printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
ret = gpio_request(S3C2410_GPB(4), "USB power control");
if (ret < 0) {
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8df506e..c9fa3fc 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -96,7 +96,7 @@
* 0x017d0000-0x02bd0000 : cramfs B
* 0x02bd0000-0x03fd0000 : yaffs
*/
-static struct mtd_partition jive_imageA_nand_part[] = {
+static struct mtd_partition __initdata jive_imageA_nand_part[] = {
#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
/* Don't allow access to the bootloader from linux */
@@ -154,7 +154,7 @@
},
};
-static struct mtd_partition jive_imageB_nand_part[] = {
+static struct mtd_partition __initdata jive_imageB_nand_part[] = {
#ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
/* Don't allow access to the bootloader from linux */
@@ -213,7 +213,7 @@
},
};
-static struct s3c2410_nand_set jive_nand_sets[] = {
+static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
[0] = {
.name = "flash",
.nr_chips = 1,
@@ -222,7 +222,7 @@
},
};
-static struct s3c2410_platform_nand jive_nand_info = {
+static struct s3c2410_platform_nand __initdata jive_nand_info = {
/* set taken from osiris nand timings, possibly still conservative */
.tacls = 30,
.twrph0 = 55,
@@ -631,7 +631,8 @@
s3c_pm_init();
- s3c_device_nand.dev.platform_data = &jive_nand_info;
+ /** TODO - check that this is after the cmdline option! */
+ s3c_nand_set_platdata(&jive_nand_info);
/* initialise the spi */
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 11e8ad4..a6ba591 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -76,7 +76,7 @@
}
};
-static struct mtd_partition vstms_nand_part[] = {
+static struct mtd_partition __initdata vstms_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = 0x7C000,
@@ -99,7 +99,7 @@
},
};
-static struct s3c2410_nand_set vstms_nand_sets[] = {
+static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
[0] = {
.name = "NAND",
.nr_chips = 1,
@@ -112,7 +112,7 @@
* chips and beyond.
*/
-static struct s3c2410_platform_nand vstms_nand_info = {
+static struct s3c2410_platform_nand __initdata vstms_nand_info = {
.tacls = 20,
.twrph0 = 60,
.twrph1 = 20,
@@ -143,8 +143,6 @@
static void __init vstms_map_io(void)
{
- s3c_device_nand.dev.platform_data = &vstms_nand_info;
-
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
@@ -153,6 +151,8 @@
static void __init vstms_init(void)
{
s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&vstms_nand_info);
+
platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
}
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a8b69d7..cf10e14 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -53,6 +53,19 @@
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
+config MACH_OSIRIS_DVS
+ tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+ depends on MACH_OSIRIS
+ select TPS65010
+ help
+ Say Y/M here if you want to have dynamic voltage scaling support
+ on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+ The DVS driver alters the voltage supplied to the ARM core
+ depending on the frequency it is running at. The driver itself
+ does not do any of the frequency alteration, which is left up
+ to the cpufreq driver.
+
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index bfadcf6..5f32245 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -23,3 +23,7 @@
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+
+# extra machine support
+
+obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 63c5ab6..0c049b9 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2440/irq.c
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 68f3870..62a4c3e 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2440/mach-anubis.c
*
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
@@ -53,8 +53,9 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/audio-simtec.h>
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
static struct map_desc anubis_iodesc[] __initdata = {
/* ISA IO areas */
@@ -138,7 +139,7 @@
static int chip0_map[] = { 0 };
static int chip1_map[] = { 1 };
-static struct mtd_partition anubis_default_nand_part[] = {
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
@@ -161,7 +162,7 @@
}
};
-static struct mtd_partition anubis_default_nand_part_large[] = {
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_128K,
@@ -191,7 +192,7 @@
* socket.
*/
-static struct s3c2410_nand_set anubis_nand_sets[] = {
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
[1] = {
.name = "External",
.nr_chips = 1,
@@ -233,7 +234,7 @@
__raw_writeb(tmp, ANUBIS_VA_CTRL1);
}
-static struct s3c2410_platform_nand anubis_nand_info = {
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
.tacls = 25,
.twrph0 = 55,
.twrph1 = 40,
@@ -437,6 +438,17 @@
}
};
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+ .have_mic = 1,
+ .have_lout = 1,
+ .output_cdclk = 1,
+ .use_mpllin = 1,
+ .amp_gpio = S3C2410_GPB(2),
+ .amp_gain[0] = S3C2410_GPD(10),
+ .amp_gain[1] = S3C2410_GPD(11),
+};
+
static void __init anubis_map_io(void)
{
/* initialise the clocks */
@@ -454,8 +466,6 @@
s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
- s3c_device_nand.dev.platform_data = &anubis_nand_info;
-
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
@@ -476,6 +486,9 @@
static void __init anubis_init(void)
{
s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&anubis_nand_info);
+ simtec_audio_add(NULL, false, &anubis_audio);
+
platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
i2c_register_board_info(0, anubis_i2c_devs,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index dfc7010..aa69290 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -96,7 +96,7 @@
/* NAND Flash on AT2440EVB board */
-static struct mtd_partition at2440evb_default_nand_part[] = {
+static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_256K,
@@ -114,7 +114,7 @@
},
};
-static struct s3c2410_nand_set at2440evb_nand_sets[] = {
+static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
[0] = {
.name = "nand",
.nr_chips = 1,
@@ -123,7 +123,7 @@
},
};
-static struct s3c2410_platform_nand at2440evb_nand_info = {
+static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
.tacls = 25,
.twrph0 = 55,
.twrph1 = 40,
@@ -216,8 +216,6 @@
static void __init at2440evb_map_io(void)
{
- s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
- s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
@@ -228,6 +226,7 @@
static void __init at2440evb_init(void)
{
s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+ s3c_nand_set_platdata(&at2440evb_nand_info);
s3c_i2c0_set_platdata(NULL);
platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 1c3382f..547d4fc 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -532,7 +532,6 @@
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
- s3c_device_nand.dev.platform_data = &mini2440_nand_info;
s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
}
@@ -677,8 +676,11 @@
printk("\n");
s3c24xx_fb_set_platdata(&mini2440_fb_info);
}
+
s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+ s3c_nand_set_platdata(&mini2440_nand_info);
s3c_i2c0_set_platdata(NULL);
+
i2c_register_board_info(0, mini2440_i2c_devs,
ARRAY_SIZE(mini2440_i2c_devs));
diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
new file mode 100644
index 0000000..ad2792d
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
@@ -0,0 +1,194 @@
+/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec Osiris Dynamic Voltage Scaling support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <plat/cpu-freq.h>
+
+#define OSIRIS_GPIO_DVS S3C2410_GPB(5)
+
+static bool dvs_en;
+
+static void osiris_dvs_tps_setdvs(bool on)
+{
+ unsigned vregs1 = 0, vdcdc2 = 0;
+
+ if (!on) {
+ vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
+ vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */
+ }
+
+ dvs_en = on;
+ vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
+ vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
+
+ tps65010_config_vregs1(vregs1);
+ tps65010_config_vdcdc2(vdcdc2);
+}
+
+static bool is_dvs(struct s3c_freq *f)
+{
+ /* at the moment, we assume ARMCLK = HCLK => DVS */
+ return f->armclk == f->hclk;
+}
+
+/* keep track of current state */
+static bool cur_dvs = false;
+
+static int osiris_dvs_notify(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct cpufreq_freqs *cf = data;
+ struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
+ bool old_dvs = is_dvs(&freqs->old);
+ bool new_dvs = is_dvs(&freqs->new);
+ int ret = 0;
+
+ if (!dvs_en)
+ return 0;
+
+ printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
+ freqs->old.armclk, freqs->old.hclk,
+ freqs->new.armclk, freqs->new.hclk);
+
+ switch (val) {
+ case CPUFREQ_PRECHANGE:
+ if (old_dvs & !new_dvs ||
+ cur_dvs & !new_dvs) {
+ pr_debug("%s: exiting dvs\n", __func__);
+ cur_dvs = false;
+ gpio_set_value(OSIRIS_GPIO_DVS, 1);
+ }
+ break;
+ case CPUFREQ_POSTCHANGE:
+ if (!old_dvs & new_dvs ||
+ !cur_dvs & new_dvs) {
+ pr_debug("entering dvs\n");
+ cur_dvs = true;
+ gpio_set_value(OSIRIS_GPIO_DVS, 0);
+ }
+ break;
+ }
+
+ return ret;
+}
+
+static struct notifier_block osiris_dvs_nb = {
+ .notifier_call = osiris_dvs_notify,
+};
+
+static int __devinit osiris_dvs_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ dev_info(&pdev->dev, "initialising\n");
+
+ ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
+ if (ret) {
+ dev_err(&pdev->dev, "cannot claim gpio\n");
+ goto err_nogpio;
+ }
+
+ /* start with dvs disabled */
+ gpio_direction_output(OSIRIS_GPIO_DVS, 1);
+
+ ret = cpufreq_register_notifier(&osiris_dvs_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register with cpufreq\n");
+ goto err_nofreq;
+ }
+
+ osiris_dvs_tps_setdvs(true);
+
+ return 0;
+
+err_nofreq:
+ gpio_free(OSIRIS_GPIO_DVS);
+
+err_nogpio:
+ return ret;
+}
+
+static int __devexit osiris_dvs_remove(struct platform_device *pdev)
+{
+ dev_info(&pdev->dev, "exiting\n");
+
+ /* disable any current dvs */
+ gpio_set_value(OSIRIS_GPIO_DVS, 1);
+ osiris_dvs_tps_setdvs(false);
+
+ cpufreq_unregister_notifier(&osiris_dvs_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+ gpio_free(OSIRIS_GPIO_DVS);
+
+ return 0;
+}
+
+/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+ * out if the configuration isn't set. */
+
+static int osiris_dvs_suspend(struct device *dev)
+{
+ gpio_set_value(OSIRIS_GPIO_DVS, 1);
+ osiris_dvs_tps_setdvs(false);
+ cur_dvs = false;
+
+ return 0;
+}
+
+static int osiris_dvs_resume(struct device *dev)
+{
+ osiris_dvs_tps_setdvs(true);
+ return 0;
+}
+
+static const struct dev_pm_ops osiris_dvs_pm = {
+ .suspend = osiris_dvs_suspend,
+ .resume = osiris_dvs_resume,
+};
+
+static struct platform_driver osiris_dvs_driver = {
+ .probe = osiris_dvs_probe,
+ .remove = __devexit_p(osiris_dvs_remove),
+ .driver = {
+ .name = "osiris-dvs",
+ .owner = THIS_MODULE,
+ .pm = &osiris_dvs_pm,
+ },
+};
+
+static int __init osiris_dvs_init(void)
+{
+ return platform_driver_register(&osiris_dvs_driver);
+}
+
+static void __exit osiris_dvs_exit(void)
+{
+ platform_driver_unregister(&osiris_dvs_driver);
+}
+
+module_init(osiris_dvs_init);
+module_exit(osiris_dvs_exit);
+
+MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:osiris-dvs");
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 2105a41..015dfb2 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2440/mach-osiris.c
*
- * Copyright (c) 2005,2008 Simtec Electronics
+ * Copyright (c) 2005-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
@@ -23,6 +23,8 @@
#include <linux/i2c.h>
#include <linux/io.h>
+#include <linux/i2c/tps65010.h>
+
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -148,7 +150,7 @@
static int chip0_map[] = { 0 };
static int chip1_map[] = { 1 };
-static struct mtd_partition osiris_default_nand_part[] = {
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
@@ -171,7 +173,7 @@
}
};
-static struct mtd_partition osiris_default_nand_part_large[] = {
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_128K,
@@ -201,7 +203,7 @@
* socket.
*/
-static struct s3c2410_nand_set osiris_nand_sets[] = {
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
[1] = {
.name = "External",
.nr_chips = 1,
@@ -243,7 +245,7 @@
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
}
-static struct s3c2410_platform_nand osiris_nand_info = {
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
.tacls = 25,
.twrph0 = 60,
.twrph1 = 60,
@@ -326,12 +328,44 @@
.cls = &osiris_pm_sysclass,
};
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+ /* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+ .name = "osiris-dvs",
+ .id = -1,
+ .dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+ osiris_tps_device.dev.parent = &client->dev;
+ return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+ platform_device_unregister(&osiris_tps_device);
+ return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+ .base = -1, /* GPIO can go anywhere at the moment */
+ .setup = osiris_tps_setup,
+ .teardown = osiris_tps_remove,
+};
+
/* I2C devices fitted. */
static struct i2c_board_info osiris_i2c_devs[] __initdata = {
{
I2C_BOARD_INFO("tps65011", 0x48),
.irq = IRQ_EINT20,
+ .platform_data = &osiris_tps_board,
},
};
@@ -377,8 +411,6 @@
s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
- s3c_device_nand.dev.platform_data = &osiris_nand_info;
-
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
@@ -408,6 +440,7 @@
sysdev_register(&osiris_pm_sysdev);
s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&osiris_nand_info);
s3c_cpufreq_setboard(&osiris_cpufreq);
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index bc8d8d1..a952a13 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.handhelds.org/projects/rx3715.html
@@ -149,7 +149,7 @@
.gpdup_mask = 0xffffffff,
};
-static struct mtd_partition rx3715_nand_part[] = {
+static struct mtd_partition __initdata rx3715_nand_part[] = {
[0] = {
.name = "Whole Flash",
.offset = 0,
@@ -158,7 +158,7 @@
}
};
-static struct s3c2410_nand_set rx3715_nand_sets[] = {
+static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
[0] = {
.name = "Internal",
.nr_chips = 1,
@@ -167,7 +167,7 @@
},
};
-static struct s3c2410_platform_nand rx3715_nand_info = {
+static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
.tacls = 25,
.twrph0 = 50,
.twrph1 = 15,
@@ -186,8 +186,6 @@
static void __init rx3715_map_io(void)
{
- s3c_device_nand.dev.platform_data = &rx3715_nand_info;
-
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
@@ -205,6 +203,7 @@
#endif
s3c_pm_init();
+ s3c_nand_set_platdata(&rx3715_nand_info);
s3c24xx_fb_set_platdata(&rx3715_fb_info);
platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
}
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index db6eafb..ec13e74 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
*
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.fluff.org/ben/smdk2440/
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 0fb385b..f76d6ff 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -423,7 +423,7 @@
},
};
-static struct s3c2410_nand_set gta02_nand_sets[] = {
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
[0] = {
/*
* This name is also hard-coded in the boot loaders, so
@@ -442,7 +442,7 @@
* data sheet (K5D2G13ACM-D075 MCP Memory).
*/
-static struct s3c2410_platform_nand gta02_nand_info = {
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
.tacls = 0,
.twrph0 = 25,
.twrph1 = 15,
@@ -621,9 +621,9 @@
#endif
s3c_device_usb.dev.platform_data = >a02_usb_info;
- s3c_device_nand.dev.platform_data = >a02_nand_info;
s3c24xx_udc_set_platdata(>a02_udc_cfg);
+ s3c_nand_set_platdata(>a02_nand_info);
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index 79e4d93..d88c8b2 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c24a0/include/mach/map.h
*
- * Copyright 2003,2007 Simtec Electronics
+ * Copyright 2003-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
index af2abd7..be0af51 100644
--- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
*
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 866be31..106ee13 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -66,6 +66,9 @@
#define S3C64XX_PA_USBHOST (0x74300000)
+#define S3C64XX_PA_USB_HSPHY (0x7C100000)
+#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
+
/* place VICs close together */
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
@@ -81,5 +84,6 @@
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
+#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
index 4701979..f566115 100644
--- a/arch/arm/mach-s3c6400/include/mach/regs-fb.h
+++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
@@ -1,195 +1,30 @@
-/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
- *
+/*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
+ * Copyright 2009 Samsung Electronics Co.
*
- * S3C64XX - new-style framebuffer register definitions
+ * Pawel Osciak <p.osciak@samsung.com>
+ * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk>
*
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards and specifically the S3C64XX series
- * S3C6400 and S3C6410.
- *
- * The file contains the cpu specific items which change between whichever
- * architecture is selected. See <plat/regs-fb.h> for the core definitions
- * that are the same.
+ * Framebuffer register definitions for Samsung S3C64xx.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-/* include the core definitions here, in case we really do need to
- * override them at a later date.
-*/
+#ifndef __ASM_ARCH_MACH_REGS_FB_H
+#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
-#include <plat/regs-fb.h>
-
-#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */
-#define VIDCON1_FSTATUS_EVEN (1 << 15)
-
-/* Video timing controls */
-#define VIDTCON0 (0x10)
-#define VIDTCON1 (0x14)
-#define VIDTCON2 (0x18)
-
-/* Window position controls */
-
-#define WINCON(_win) (0x20 + ((_win) * 4))
-
-/* OSD1 and OSD4 do not have register D */
-
-#define VIDOSD_A(_win) (0x40 + ((_win) * 16))
-#define VIDOSD_B(_win) (0x44 + ((_win) * 16))
-#define VIDOSD_C(_win) (0x48 + ((_win) * 16))
-#define VIDOSD_D(_win) (0x4C + ((_win) * 16))
-
-/* Video buffer addresses */
-
-#define VIDW_BUF_START(_buff) (0xA0 + ((_buff) * 8))
-#define VIDW_BUF_START1(_buff) (0xA4 + ((_buff) * 8))
-#define VIDW_BUF_END(_buff) (0xD0 + ((_buff) * 8))
-#define VIDW_BUF_END1(_buff) (0xD4 + ((_buff) * 8))
-#define VIDW_BUF_SIZE(_buff) (0x100 + ((_buff) * 4))
-
-#define VIDINTCON0 (0x130)
-
-#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4))
-
-/* WINCONx */
-
-#define WINCONx_CSCWIDTH_MASK (0x3 << 26)
-#define WINCONx_CSCWIDTH_SHIFT (26)
-#define WINCONx_CSCWIDTH_WIDE (0x0 << 26)
-#define WINCONx_CSCWIDTH_NARROW (0x3 << 26)
-
-#define WINCONx_ENLOCAL (1 << 22)
-#define WINCONx_BUFSTATUS (1 << 21)
-#define WINCONx_BUFSEL (1 << 20)
-#define WINCONx_BUFAUTOEN (1 << 19)
-#define WINCONx_YCbCr (1 << 13)
-
-#define WINCON1_LOCALSEL_CAMIF (1 << 23)
-
-#define WINCON2_LOCALSEL_CAMIF (1 << 23)
-#define WINCON2_BLD_PIX (1 << 6)
-
-#define WINCON2_ALPHA_SEL (1 << 1)
-#define WINCON2_BPPMODE_MASK (0xf << 2)
-#define WINCON2_BPPMODE_SHIFT (2)
-#define WINCON2_BPPMODE_1BPP (0x0 << 2)
-#define WINCON2_BPPMODE_2BPP (0x1 << 2)
-#define WINCON2_BPPMODE_4BPP (0x2 << 2)
-#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2)
-#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2)
-#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2)
-#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2)
-#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2)
-#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2)
-#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2)
-#define WINCON2_BPPMODE_24BPP_888 (0xb << 2)
-#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2)
-#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2)
-#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2)
-
-#define WINCON3_BLD_PIX (1 << 6)
-
-#define WINCON3_ALPHA_SEL (1 << 1)
-#define WINCON3_BPPMODE_MASK (0xf << 2)
-#define WINCON3_BPPMODE_SHIFT (2)
-#define WINCON3_BPPMODE_1BPP (0x0 << 2)
-#define WINCON3_BPPMODE_2BPP (0x1 << 2)
-#define WINCON3_BPPMODE_4BPP (0x2 << 2)
-#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2)
-#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2)
-#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2)
-#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2)
-#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2)
-#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2)
-#define WINCON3_BPPMODE_24BPP_888 (0xb << 2)
-#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2)
-#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2)
-#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2)
-
-#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5)
-
-#define DITHMODE (0x170)
-#define WINxMAP(_win) (0x180 + ((_win) * 4))
-
-
-#define DITHMODE_R_POS_MASK (0x3 << 5)
-#define DITHMODE_R_POS_SHIFT (5)
-#define DITHMODE_R_POS_8BIT (0x0 << 5)
-#define DITHMODE_R_POS_6BIT (0x1 << 5)
-#define DITHMODE_R_POS_5BIT (0x2 << 5)
-
-#define DITHMODE_G_POS_MASK (0x3 << 3)
-#define DITHMODE_G_POS_SHIFT (3)
-#define DITHMODE_G_POS_8BIT (0x0 << 3)
-#define DITHMODE_G_POS_6BIT (0x1 << 3)
-#define DITHMODE_G_POS_5BIT (0x2 << 3)
-
-#define DITHMODE_B_POS_MASK (0x3 << 1)
-#define DITHMODE_B_POS_SHIFT (1)
-#define DITHMODE_B_POS_8BIT (0x0 << 1)
-#define DITHMODE_B_POS_6BIT (0x1 << 1)
-#define DITHMODE_B_POS_5BIT (0x2 << 1)
-
-#define DITHMODE_DITH_EN (1 << 0)
-
-#define WPALCON (0x1A0)
-
-#define WPALCON_W4PAL_16BPP_A555 (1 << 8)
-#define WPALCON_W3PAL_16BPP_A555 (1 << 7)
-#define WPALCON_W2PAL_16BPP_A555 (1 << 6)
+#include <plat/regs-fb-v4.h>
/* Palette registers */
-
#define WIN2_PAL(_entry) (0x300 + ((_entry) * 2))
#define WIN3_PAL(_entry) (0x320 + ((_entry) * 2))
#define WIN4_PAL(_entry) (0x340 + ((_entry) * 2))
#define WIN0_PAL(_entry) (0x400 + ((_entry) * 4))
#define WIN1_PAL(_entry) (0x800 + ((_entry) * 4))
-/* system specific implementation code for palette sizes, and other
- * information that changes depending on which architecture is being
- * compiled.
-*/
-
-/* return true if window _win has OSD register D */
-#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
-
-static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
-{
- if (win < 2)
- return 256;
- if (win < 4)
- return 16;
- if (win == 4)
- return 4;
-
- BUG(); /* shouldn't get here */
-}
-
-static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
-{
- /* all windows can do 1/2 bpp */
-
- if ((bpp == 25 || bpp == 19) && win == 0)
- return 0; /* win 0 does not have 19 or 25bpp modes */
-
- if (bpp == 4 && win == 4)
- return 0;
-
- if (bpp == 8 && (win >= 3))
- return 0; /* win 3/4 cannot do 8bpp in any mode */
-
- return 1;
-}
-
static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
{
switch (window) {
@@ -203,57 +38,4 @@
BUG();
}
-static inline int s3c_fb_pal_is16(unsigned int window)
-{
- return window > 1;
-}
-
-struct s3c_fb_palette {
- struct fb_bitfield r;
- struct fb_bitfield g;
- struct fb_bitfield b;
- struct fb_bitfield a;
-};
-
-static inline void s3c_fb_init_palette(unsigned int window,
- struct s3c_fb_palette *palette)
-{
- if (window < 2) {
- /* Windows 0/1 are 8/8/8 or A/8/8/8 */
- palette->r.offset = 16;
- palette->r.length = 8;
- palette->g.offset = 8;
- palette->g.length = 8;
- palette->b.offset = 0;
- palette->b.length = 8;
- } else {
- /* currently we assume RGB 5/6/5 */
- palette->r.offset = 11;
- palette->r.length = 5;
- palette->g.offset = 5;
- palette->g.length = 6;
- palette->b.offset = 0;
- palette->b.length = 5;
- }
-}
-
-/* Notes on per-window bpp settings
- *
- * Value Win0 Win1 Win2 Win3 Win 4
- * 0000 1(P) 1(P) 1(P) 1(P) 1(P)
- * 0001 2(P) 2(P) 2(P) 2(P) 2(P)
- * 0010 4(P) 4(P) 4(P) 4(P) -none-
- * 0011 8(P) 8(P) -none- -none- -none-
- * 0100 -none- 8(A232) 8(A232) -none- -none-
- * 0101 16(565) 16(565) 16(565) 16(565) 16(565)
- * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555)
- * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555)
- * 1000 18(666) 18(666) 18(666) 18(666) 18(666)
- * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665)
- * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666)
- * 1011 24(888) 24(888) 24(888) 24(888) 24(888)
- * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887)
- * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888)
- * 1110 -none- -none- -none- -none- -none-
- * 1111 -none- -none- -none- -none- -none-
-*/
+#endif /* __ASM_ARCH_MACH_REGS_FB_H */
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index b42bdd0f..d876ee5 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -45,6 +45,7 @@
s3c6400_default_sdhci0();
s3c6400_default_sdhci1();
+ s3c6400_default_sdhci2();
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 9b67c66..522c086 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -58,6 +58,7 @@
/* initialise device information early */
s3c6410_default_sdhci0();
s3c6410_default_sdhci1();
+ s3c6410_default_sdhci2();
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
index c574105..cdd4b53 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -250,7 +250,7 @@
{
s3c_i2c0_set_platdata(NULL);
s3c_fb_set_platdata(&hmt_lcd_pdata);
- s3c_device_nand.dev.platform_data = &hmt_nand_info;
+ s3c_nand_set_platdata(&hmt_nand_info);
gpio_request(S3C64XX_GPC(7), "usb power");
gpio_direction_output(S3C64XX_GPC(7), 0);
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 9f1a214..480d297 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
#ifdef CONFIG_SMDK6410_WM1190_EV1
#include <linux/mfd/wm8350/core.h>
@@ -184,6 +185,43 @@
},
};
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+ {
+ /* WM8580 */
+ .supply = "PVDD",
+ .dev_name = "0-001b",
+ },
+ {
+ /* WM8580 */
+ .supply = "AVDD",
+ .dev_name = "0-001b",
+ },
+};
+
+static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+ .constraints = {
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+ .consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+ .supply_name = "B_PWR_5V",
+ .microvolts = 5000000,
+ .init_data = &smdk6410_b_pwr_5v_data,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+ .name = "reg-fixed-voltage",
+ .id = -1,
+ .dev = {
+ .platform_data = &smdk6410_b_pwr_5v_pdata,
+ },
+};
+#endif
+
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
@@ -198,6 +236,10 @@
&s3c_device_fb,
&s3c_device_usb,
&s3c_device_usb_hsotg,
+
+#ifdef CONFIG_REGULATOR
+ &smdk6410_b_pwr_5v,
+#endif
&smdk6410_lcd_powerdev,
&smdk6410_smsc911x,
@@ -232,6 +274,14 @@
};
/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+ {
+ /* WM8580 */
+ .supply = "DVDD",
+ .dev_name = "0-001b",
+ },
+};
+
static struct regulator_init_data wm8350_dcdc4_data = {
.constraints = {
.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
@@ -239,6 +289,8 @@
.max_uV = 3000000,
.always_on = 1,
},
+ .num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+ .consumer_supplies = wm8350_dcdc4_consumers,
};
/* ARM core */
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index b1a4ba5..0dd2b8c 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -14,9 +14,23 @@
help
Enable S5PC100 CPU support
+config S5PC100_SETUP_SDHCI
+ bool
+ select S5PC1XX_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for S5PC100 based SDHCI systems
+
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
+ select S3C_DEV_FB
+ select S3C_DEV_I2C1
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select S5PC1XX_SETUP_I2C0
select S5PC1XX_SETUP_I2C1
+ select S5PC1XX_SETUP_FB_24BPP
+ select S5PC100_SETUP_SDHCI
help
Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index afc89b3..809ff10 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -13,5 +13,9 @@
obj-$(CONFIG_CPU_S5PC100) += cpu.o
+# Helper and device support
+
+obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
+
# machine support
obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index 0e71889..d79e757 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -22,6 +22,8 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
+#include <asm/proc-fns.h>
+
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -32,6 +34,7 @@
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
+#include <plat/regs-power.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -45,6 +48,23 @@
static struct map_desc s5pc100_iodesc[] __initdata = {
};
+static void s5pc100_idle(void)
+{
+ unsigned long tmp;
+
+ tmp = __raw_readl(S5PC100_PWR_CFG);
+ tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
+ tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
+ tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
+ __raw_writel(tmp, S5PC100_PWR_CFG);
+
+ tmp = __raw_readl(S5PC100_OTHERS);
+ tmp |= S5PC100_PMU_INT_DISABLE;
+ __raw_writel(tmp, S5PC100_OTHERS);
+
+ cpu_do_idle();
+}
+
/* s5pc100_map_io
*
* register the standard cpu IO areas
@@ -55,6 +75,13 @@
iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
/* initialise device information early */
+ s5pc100_default_sdhci0();
+ s5pc100_default_sdhci1();
+ s5pc100_default_sdhci2();
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
}
void __init s5pc100_init_clocks(int xtal)
@@ -93,5 +120,7 @@
{
printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+ s5pc1xx_idle = s5pc100_idle;
+
return sysdev_register(&s5pc100_sysdev);
}
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index c74fc93..2c4cbe8 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -18,40 +18,45 @@
#define gpio_to_irq __gpio_to_irq
/* GPIO bank sizes */
-#define S5PC1XX_GPIO_A0_NR (8)
-#define S5PC1XX_GPIO_A1_NR (5)
-#define S5PC1XX_GPIO_B_NR (8)
-#define S5PC1XX_GPIO_C_NR (5)
-#define S5PC1XX_GPIO_D_NR (7)
-#define S5PC1XX_GPIO_E0_NR (8)
-#define S5PC1XX_GPIO_E1_NR (6)
-#define S5PC1XX_GPIO_F0_NR (8)
-#define S5PC1XX_GPIO_F1_NR (8)
-#define S5PC1XX_GPIO_F2_NR (8)
-#define S5PC1XX_GPIO_F3_NR (4)
-#define S5PC1XX_GPIO_G0_NR (8)
-#define S5PC1XX_GPIO_G1_NR (3)
-#define S5PC1XX_GPIO_G2_NR (7)
-#define S5PC1XX_GPIO_G3_NR (7)
-#define S5PC1XX_GPIO_H0_NR (8)
-#define S5PC1XX_GPIO_H1_NR (8)
-#define S5PC1XX_GPIO_H2_NR (8)
-#define S5PC1XX_GPIO_H3_NR (8)
-#define S5PC1XX_GPIO_I_NR (8)
-#define S5PC1XX_GPIO_J0_NR (8)
-#define S5PC1XX_GPIO_J1_NR (5)
-#define S5PC1XX_GPIO_J2_NR (8)
-#define S5PC1XX_GPIO_J3_NR (8)
-#define S5PC1XX_GPIO_J4_NR (4)
-#define S5PC1XX_GPIO_K0_NR (8)
-#define S5PC1XX_GPIO_K1_NR (6)
-#define S5PC1XX_GPIO_K2_NR (8)
-#define S5PC1XX_GPIO_K3_NR (8)
-#define S5PC1XX_GPIO_MP00_NR (8)
-#define S5PC1XX_GPIO_MP01_NR (8)
-#define S5PC1XX_GPIO_MP02_NR (8)
-#define S5PC1XX_GPIO_MP03_NR (8)
-#define S5PC1XX_GPIO_MP04_NR (5)
+#define S5PC100_GPIO_A0_NR (8)
+#define S5PC100_GPIO_A1_NR (5)
+#define S5PC100_GPIO_B_NR (8)
+#define S5PC100_GPIO_C_NR (5)
+#define S5PC100_GPIO_D_NR (7)
+#define S5PC100_GPIO_E0_NR (8)
+#define S5PC100_GPIO_E1_NR (6)
+#define S5PC100_GPIO_F0_NR (8)
+#define S5PC100_GPIO_F1_NR (8)
+#define S5PC100_GPIO_F2_NR (8)
+#define S5PC100_GPIO_F3_NR (4)
+#define S5PC100_GPIO_G0_NR (8)
+#define S5PC100_GPIO_G1_NR (3)
+#define S5PC100_GPIO_G2_NR (7)
+#define S5PC100_GPIO_G3_NR (7)
+#define S5PC100_GPIO_H0_NR (8)
+#define S5PC100_GPIO_H1_NR (8)
+#define S5PC100_GPIO_H2_NR (8)
+#define S5PC100_GPIO_H3_NR (8)
+#define S5PC100_GPIO_I_NR (8)
+#define S5PC100_GPIO_J0_NR (8)
+#define S5PC100_GPIO_J1_NR (5)
+#define S5PC100_GPIO_J2_NR (8)
+#define S5PC100_GPIO_J3_NR (8)
+#define S5PC100_GPIO_J4_NR (4)
+#define S5PC100_GPIO_K0_NR (8)
+#define S5PC100_GPIO_K1_NR (6)
+#define S5PC100_GPIO_K2_NR (8)
+#define S5PC100_GPIO_K3_NR (8)
+#define S5PC100_GPIO_L0_NR (8)
+#define S5PC100_GPIO_L1_NR (8)
+#define S5PC100_GPIO_L2_NR (8)
+#define S5PC100_GPIO_L3_NR (8)
+#define S5PC100_GPIO_L4_NR (8)
+#define S5PC100_GPIO_MP00_NR (8)
+#define S5PC100_GPIO_MP01_NR (8)
+#define S5PC100_GPIO_MP02_NR (8)
+#define S5PC100_GPIO_MP03_NR (8)
+#define S5PC100_GPIO_MP04_NR (5)
/* GPIO bank numbes */
@@ -64,83 +69,94 @@
((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
enum s3c_gpio_number {
- S5PC1XX_GPIO_A0_START = 0,
- S5PC1XX_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
- S5PC1XX_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
- S5PC1XX_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
- S5PC1XX_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
- S5PC1XX_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
- S5PC1XX_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
- S5PC1XX_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
- S5PC1XX_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
- S5PC1XX_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
- S5PC1XX_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
- S5PC1XX_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
- S5PC1XX_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
- S5PC1XX_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
- S5PC1XX_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
- S5PC1XX_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
- S5PC1XX_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
- S5PC1XX_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
- S5PC1XX_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
- S5PC1XX_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
- S5PC1XX_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
- S5PC1XX_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
- S5PC1XX_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
- S5PC1XX_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
- S5PC1XX_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
- S5PC1XX_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
- S5PC1XX_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
- S5PC1XX_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
- S5PC1XX_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
- S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
- S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
- S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
- S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
- S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+ S5PC100_GPIO_A0_START = 0,
+ S5PC100_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0),
+ S5PC100_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1),
+ S5PC100_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B),
+ S5PC100_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C),
+ S5PC100_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D),
+ S5PC100_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0),
+ S5PC100_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1),
+ S5PC100_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0),
+ S5PC100_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1),
+ S5PC100_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2),
+ S5PC100_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3),
+ S5PC100_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0),
+ S5PC100_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1),
+ S5PC100_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2),
+ S5PC100_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3),
+ S5PC100_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0),
+ S5PC100_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1),
+ S5PC100_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2),
+ S5PC100_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3),
+ S5PC100_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I),
+ S5PC100_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0),
+ S5PC100_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1),
+ S5PC100_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2),
+ S5PC100_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3),
+ S5PC100_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4),
+ S5PC100_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0),
+ S5PC100_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1),
+ S5PC100_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2),
+ S5PC100_GPIO_L0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3),
+ S5PC100_GPIO_L1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0),
+ S5PC100_GPIO_L2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1),
+ S5PC100_GPIO_L3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2),
+ S5PC100_GPIO_L4_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3),
+ S5PC100_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4),
+ S5PC100_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00),
+ S5PC100_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01),
+ S5PC100_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02),
+ S5PC100_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03),
+ S5PC100_GPIO_END = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04),
};
-/* S5PC1XX GPIO number definitions. */
-#define S5PC1XX_GPA0(_nr) (S5PC1XX_GPIO_A0_START + (_nr))
-#define S5PC1XX_GPA1(_nr) (S5PC1XX_GPIO_A1_START + (_nr))
-#define S5PC1XX_GPB(_nr) (S5PC1XX_GPIO_B_START + (_nr))
-#define S5PC1XX_GPC(_nr) (S5PC1XX_GPIO_C_START + (_nr))
-#define S5PC1XX_GPD(_nr) (S5PC1XX_GPIO_D_START + (_nr))
-#define S5PC1XX_GPE0(_nr) (S5PC1XX_GPIO_E0_START + (_nr))
-#define S5PC1XX_GPE1(_nr) (S5PC1XX_GPIO_E1_START + (_nr))
-#define S5PC1XX_GPF0(_nr) (S5PC1XX_GPIO_F0_START + (_nr))
-#define S5PC1XX_GPF1(_nr) (S5PC1XX_GPIO_F1_START + (_nr))
-#define S5PC1XX_GPF2(_nr) (S5PC1XX_GPIO_F2_START + (_nr))
-#define S5PC1XX_GPF3(_nr) (S5PC1XX_GPIO_F3_START + (_nr))
-#define S5PC1XX_GPG0(_nr) (S5PC1XX_GPIO_G0_START + (_nr))
-#define S5PC1XX_GPG1(_nr) (S5PC1XX_GPIO_G1_START + (_nr))
-#define S5PC1XX_GPG2(_nr) (S5PC1XX_GPIO_G2_START + (_nr))
-#define S5PC1XX_GPG3(_nr) (S5PC1XX_GPIO_G3_START + (_nr))
-#define S5PC1XX_GPH0(_nr) (S5PC1XX_GPIO_H0_START + (_nr))
-#define S5PC1XX_GPH1(_nr) (S5PC1XX_GPIO_H1_START + (_nr))
-#define S5PC1XX_GPH2(_nr) (S5PC1XX_GPIO_H2_START + (_nr))
-#define S5PC1XX_GPH3(_nr) (S5PC1XX_GPIO_H3_START + (_nr))
-#define S5PC1XX_GPI(_nr) (S5PC1XX_GPIO_I_START + (_nr))
-#define S5PC1XX_GPJ0(_nr) (S5PC1XX_GPIO_J0_START + (_nr))
-#define S5PC1XX_GPJ1(_nr) (S5PC1XX_GPIO_J1_START + (_nr))
-#define S5PC1XX_GPJ2(_nr) (S5PC1XX_GPIO_J2_START + (_nr))
-#define S5PC1XX_GPJ3(_nr) (S5PC1XX_GPIO_J3_START + (_nr))
-#define S5PC1XX_GPJ4(_nr) (S5PC1XX_GPIO_J4_START + (_nr))
-#define S5PC1XX_GPK0(_nr) (S5PC1XX_GPIO_K0_START + (_nr))
-#define S5PC1XX_GPK1(_nr) (S5PC1XX_GPIO_K1_START + (_nr))
-#define S5PC1XX_GPK2(_nr) (S5PC1XX_GPIO_K2_START + (_nr))
-#define S5PC1XX_GPK3(_nr) (S5PC1XX_GPIO_K3_START + (_nr))
-#define S5PC1XX_MP00(_nr) (S5PC1XX_GPIO_MP00_START + (_nr))
-#define S5PC1XX_MP01(_nr) (S5PC1XX_GPIO_MP01_START + (_nr))
-#define S5PC1XX_MP02(_nr) (S5PC1XX_GPIO_MP02_START + (_nr))
-#define S5PC1XX_MP03(_nr) (S5PC1XX_GPIO_MP03_START + (_nr))
-#define S5PC1XX_MP04(_nr) (S5PC1XX_GPIO_MP04_START + (_nr))
+/* S5PC100 GPIO number definitions. */
+#define S5PC100_GPA0(_nr) (S5PC100_GPIO_A0_START + (_nr))
+#define S5PC100_GPA1(_nr) (S5PC100_GPIO_A1_START + (_nr))
+#define S5PC100_GPB(_nr) (S5PC100_GPIO_B_START + (_nr))
+#define S5PC100_GPC(_nr) (S5PC100_GPIO_C_START + (_nr))
+#define S5PC100_GPD(_nr) (S5PC100_GPIO_D_START + (_nr))
+#define S5PC100_GPE0(_nr) (S5PC100_GPIO_E0_START + (_nr))
+#define S5PC100_GPE1(_nr) (S5PC100_GPIO_E1_START + (_nr))
+#define S5PC100_GPF0(_nr) (S5PC100_GPIO_F0_START + (_nr))
+#define S5PC100_GPF1(_nr) (S5PC100_GPIO_F1_START + (_nr))
+#define S5PC100_GPF2(_nr) (S5PC100_GPIO_F2_START + (_nr))
+#define S5PC100_GPF3(_nr) (S5PC100_GPIO_F3_START + (_nr))
+#define S5PC100_GPG0(_nr) (S5PC100_GPIO_G0_START + (_nr))
+#define S5PC100_GPG1(_nr) (S5PC100_GPIO_G1_START + (_nr))
+#define S5PC100_GPG2(_nr) (S5PC100_GPIO_G2_START + (_nr))
+#define S5PC100_GPG3(_nr) (S5PC100_GPIO_G3_START + (_nr))
+#define S5PC100_GPH0(_nr) (S5PC100_GPIO_H0_START + (_nr))
+#define S5PC100_GPH1(_nr) (S5PC100_GPIO_H1_START + (_nr))
+#define S5PC100_GPH2(_nr) (S5PC100_GPIO_H2_START + (_nr))
+#define S5PC100_GPH3(_nr) (S5PC100_GPIO_H3_START + (_nr))
+#define S5PC100_GPI(_nr) (S5PC100_GPIO_I_START + (_nr))
+#define S5PC100_GPJ0(_nr) (S5PC100_GPIO_J0_START + (_nr))
+#define S5PC100_GPJ1(_nr) (S5PC100_GPIO_J1_START + (_nr))
+#define S5PC100_GPJ2(_nr) (S5PC100_GPIO_J2_START + (_nr))
+#define S5PC100_GPJ3(_nr) (S5PC100_GPIO_J3_START + (_nr))
+#define S5PC100_GPJ4(_nr) (S5PC100_GPIO_J4_START + (_nr))
+#define S5PC100_GPK0(_nr) (S5PC100_GPIO_K0_START + (_nr))
+#define S5PC100_GPK1(_nr) (S5PC100_GPIO_K1_START + (_nr))
+#define S5PC100_GPK2(_nr) (S5PC100_GPIO_K2_START + (_nr))
+#define S5PC100_GPK3(_nr) (S5PC100_GPIO_K3_START + (_nr))
+#define S5PC100_GPL0(_nr) (S5PC100_GPIO_L0_START + (_nr))
+#define S5PC100_GPL1(_nr) (S5PC100_GPIO_L1_START + (_nr))
+#define S5PC100_GPL2(_nr) (S5PC100_GPIO_L2_START + (_nr))
+#define S5PC100_GPL3(_nr) (S5PC100_GPIO_L3_START + (_nr))
+#define S5PC100_GPL4(_nr) (S5PC100_GPIO_L4_START + (_nr))
+#define S5PC100_MP00(_nr) (S5PC100_GPIO_MP00_START + (_nr))
+#define S5PC100_MP01(_nr) (S5PC100_GPIO_MP01_START + (_nr))
+#define S5PC100_MP02(_nr) (S5PC100_GPIO_MP02_START + (_nr))
+#define S5PC100_MP03(_nr) (S5PC100_GPIO_MP03_START + (_nr))
+#define S5PC100_MP04(_nr) (S5PC100_GPIO_MP04_START + (_nr))
+#define S5PC100_MP05(_nr) (S5PC100_GPIO_MP05_START + (_nr))
-/* the end of the S5PC1XX specific gpios */
-#define S5PC1XX_GPIO_END (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
-#define S3C_GPIO_END S5PC1XX_GPIO_END
+/* It used the end of the S5PC1XX gpios */
+#define S3C_GPIO_END S5PC100_GPIO_END
/* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 622720d..b53fa48 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -11,4 +11,9 @@
#include <plat/irqs.h>
+/* LCD */
+#define IRQ_LCD_FIFO IRQ_LCD0
+#define IRQ_LCD_VSYNC IRQ_LCD1
+#define IRQ_LCD_SYSTEM IRQ_LCD2
+
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 9e9f391..4681ebe 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -17,6 +17,19 @@
#include <plat/map-base.h>
+/*
+ * map-base.h has already defined virtual memory address
+ * S3C_VA_IRQ S3C_ADDR(0x00000000) irq controller(s)
+ * S3C_VA_SYS S3C_ADDR(0x00100000) system control
+ * S3C_VA_MEM S3C_ADDR(0x00200000) system control (not used)
+ * S3C_VA_TIMER S3C_ADDR(0x00300000) timer block
+ * S3C_VA_WATCHDOG S3C_ADDR(0x00400000) watchdog
+ * S3C_VA_UART S3C_ADDR(0x01000000) UART
+ *
+ * S5PC100 specific virtual memory address can be defined here
+ * S5PC1XX_VA_GPIO S3C_ADDR(0x00500000) GPIO
+ *
+ */
/* Chip ID */
#define S5PC100_PA_CHIPID (0xE0000000)
@@ -24,13 +37,20 @@
#define S5PC1XX_VA_CHIPID S3C_VA_SYS
/* System */
-#define S5PC100_PA_SYS (0xE0100000)
-#define S5PC100_PA_CLK (S5PC100_PA_SYS + 0x0)
-#define S5PC100_PA_PWR (S5PC100_PA_SYS + 0x8000)
+#define S5PC100_PA_CLK (0xE0100000)
+#define S5PC100_PA_CLK_OTHER (0xE0200000)
+#define S5PC100_PA_PWR (0xE0108000)
#define S5PC1XX_PA_CLK S5PC100_PA_CLK
#define S5PC1XX_PA_PWR S5PC100_PA_PWR
+#define S5PC1XX_PA_CLK_OTHER S5PC100_PA_CLK_OTHER
#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000)
#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000)
+#define S5PC1XX_VA_CLK_OTHER (S3C_VA_SYS + 0x30000)
+
+/* GPIO */
+#define S5PC100_PA_GPIO (0xE0300000)
+#define S5PC1XX_PA_GPIO S5PC100_PA_GPIO
+#define S5PC1XX_VA_GPIO S3C_ADDR(0x00500000)
/* Interrupt */
#define S5PC100_PA_VIC (0xE4000000)
@@ -40,23 +60,64 @@
#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+/* DMA */
+#define S5PC100_PA_MDMA (0xE8100000)
+#define S5PC100_PA_PDMA0 (0xE9000000)
+#define S5PC100_PA_PDMA1 (0xE9200000)
+
/* Timer */
#define S5PC100_PA_TIMER (0xEA000000)
#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER
#define S5PC1XX_VA_TIMER S3C_VA_TIMER
+/* RTC */
+#define S5PC100_PA_RTC (0xEA300000)
+
/* UART */
#define S5PC100_PA_UART (0xEC000000)
#define S5PC1XX_PA_UART S5PC100_PA_UART
#define S5PC1XX_VA_UART S3C_VA_UART
-/* IIC */
-#define S5PC100_PA_IIC (0xEC100000)
+/* I2C */
+#define S5PC100_PA_I2C (0xEC100000)
+#define S5PC100_PA_I2C1 (0xEC200000)
+
+/* USB HS OTG */
+#define S5PC100_PA_USB_HSOTG (0xED200000)
+#define S5PC100_PA_USB_HSPHY (0xED300000)
+
+/* SD/MMC */
+#define S5PC100_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+#define S5PC100_PA_HSMMC0 S5PC100_PA_HSMMC(0)
+#define S5PC100_PA_HSMMC1 S5PC100_PA_HSMMC(1)
+#define S5PC100_PA_HSMMC2 S5PC100_PA_HSMMC(2)
+
+/* LCD */
+#define S5PC100_PA_FB (0xEE000000)
+
+/* Multimedia */
+#define S5PC100_PA_G2D (0xEE800000)
+#define S5PC100_PA_JPEG (0xEE500000)
+#define S5PC100_PA_ROTATOR (0xEE100000)
+#define S5PC100_PA_G3D (0xEF000000)
+
+/* I2S */
+#define S5PC100_PA_I2S0 (0xF2000000)
+#define S5PC100_PA_I2S1 (0xF2100000)
+#define S5PC100_PA_I2S2 (0xF2200000)
+
+/* KEYPAD */
+#define S5PC100_PA_KEYPAD (0xF3100000)
+
+/* ADC & TouchScreen */
+#define S5PC100_PA_TSADC (0xF3000000)
/* ETC */
#define S5PC100_PA_SDRAM (0x20000000)
+#define S5PC1XX_PA_SDRAM S5PC100_PA_SDRAM
/* compatibility defines. */
+#define S3C_PA_RTC S5PC100_PA_RTC
#define S3C_PA_UART S5PC100_PA_UART
#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0)
#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400)
@@ -67,9 +128,23 @@
#define S3C_VA_UART2 (S3C_VA_UART + 0x800)
#define S3C_VA_UART3 (S3C_VA_UART + 0xC00)
#define S3C_UART_OFFSET 0x400
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_FB S5PC100_PA_FB
+#define S3C_PA_G2D S5PC100_PA_G2D
+#define S3C_PA_G3D S5PC100_PA_G3D
+#define S3C_PA_JPEG S5PC100_PA_JPEG
+#define S3C_PA_ROTATOR S5PC100_PA_ROTATOR
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC S5PC100_PA_IIC
+#define S3C_PA_IIC S5PC100_PA_I2C
+#define S3C_PA_IIC1 S5PC100_PA_I2C1
+#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
+#define S3C_PA_HSMMC0 S5PC100_PA_HSMMC0
+#define S3C_PA_HSMMC1 S5PC100_PA_HSMMC1
+#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2
+#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
+#define S3C_PA_TSADC S5PC100_PA_TSADC
#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
new file mode 100644
index 0000000..1732cd2
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
@@ -0,0 +1,139 @@
+/* arch/arm/mach-s5pc100/include/mach/regs-fb.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Framebuffer register definitions for Samsung S5PC100.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_FB_H
+#define __ASM_ARCH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+/* VP1 interface timing control */
+#define VP1CON0 (0x118)
+#define VP1_RATECON_EN (1 << 31)
+#define VP1_CLKRATE_MASK (0xff)
+
+#define VP1CON1 (0x11c)
+#define VP1_VTREGCON_EN (1 << 31)
+#define VP1_VBPD_MASK (0xfff)
+#define VP1_VBPD_SHIFT (16)
+
+
+#define WPALCON_H (0x19c)
+#define WPALCON_L (0x1a0)
+
+/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but
+ * different for WPAL2-4
+ */
+/* In WPALCON_L (aka WPALCON) */
+#define WPALCON_W1PAL_32BPP_A888 (0x7 << 3)
+#define WPALCON_W0PAL_32BPP_A888 (0x7 << 0)
+
+/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H,
+ * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]).
+ */
+#define WPALCON_L_WxPAL_L_MASK (0x1)
+#define WPALCON_L_W2PAL_L_SHIFT (6)
+#define WPALCON_L_W3PAL_L_SHIFT (7)
+#define WPALCON_L_W4PAL_L_SHIFT (8)
+
+#define WPALCON_L_WxPAL_H_MASK (0x3)
+#define WPALCON_H_W2PAL_H_SHIFT (9)
+#define WPALCON_H_W3PAL_H_SHIFT (13)
+#define WPALCON_H_W4PAL_H_SHIFT (17)
+
+/* Per-window alpha value registers */
+/* For window 0 8-bit alpha values are in VIDW0ALPHAx,
+ * for windows 1-4 alpha values consist of two parts, the 4 low bits are
+ * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC,
+ * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0])
+ */
+#define VIDWxALPHA0(_win) (0x200 + (_win * 8))
+#define VIDWxALPHA1(_win) (0x204 + (_win * 8))
+
+/* Only for window 0 in VIDW0ALPHAx. */
+#define VIDW0ALPHAx_R(_x) ((_x) << 16)
+#define VIDW0ALPHAx_R_MASK (0xff << 16)
+#define VIDW0ALPHAx_R_SHIFT (16)
+#define VIDW0ALPHAx_G(_x) ((_x) << 8)
+#define VIDW0ALPHAx_G_MASK (0xff << 8)
+#define VIDW0ALPHAx_G_SHIFT (8)
+#define VIDW0ALPHAx_B(_x) ((_x) << 0)
+#define VIDW0ALPHAx_B_MASK (0xff << 0)
+#define VIDW0ALPHAx_B_SHIFT (0)
+
+/* Low 4 bits of alpha0-1 for windows 1-4 */
+#define VIDW14ALPHAx_R_L(_x) ((_x) << 16)
+#define VIDW14ALPHAx_R_L_MASK (0xf << 16)
+#define VIDW14ALPHAx_R_L_SHIFT (16)
+#define VIDW14ALPHAx_G_L(_x) ((_x) << 8)
+#define VIDW14ALPHAx_G_L_MASK (0xf << 8)
+#define VIDW14ALPHAx_G_L_SHIFT (8)
+#define VIDW14ALPHAx_B_L(_x) ((_x) << 0)
+#define VIDW14ALPHAx_B_L_MASK (0xf << 0)
+#define VIDW14ALPHAx_B_L_SHIFT (0)
+
+
+/* Per-window blending equation control registers */
+#define BLENDEQx(_win) (0x244 + ((_win) * 4))
+#define BLENDEQ1 (0x244)
+#define BLENDEQ2 (0x248)
+#define BLENDEQ3 (0x24c)
+#define BLENDEQ4 (0x250)
+
+#define BLENDEQx_Q_FUNC(_x) ((_x) << 18)
+#define BLENDEQx_Q_FUNC_MASK (0xf << 18)
+#define BLENDEQx_P_FUNC(_x) ((_x) << 12)
+#define BLENDEQx_P_FUNC_MASK (0xf << 12)
+#define BLENDEQx_B_FUNC(_x) ((_x) << 6)
+#define BLENDEQx_B_FUNC_MASK (0xf << 6)
+#define BLENDEQx_A_FUNC(_x) ((_x) << 0)
+#define BLENDEQx_A_FUNC_MASK (0xf << 0)
+
+#define BLENDCON (0x260)
+#define BLENDCON_8BIT_ALPHA (1 << 0)
+
+/* Per-window palette base addresses (start of palette memory).
+ * Each window palette area consists of 256 32-bit entries.
+ * START is the first address (entry 0th), END is the address of 255th entry.
+ */
+#define WIN0_PAL_BASE (0x2400)
+#define WIN0_PAL_END (0x27fc)
+#define WIN1_PAL_BASE (0x2800)
+#define WIN1_PAL_END (0x2bfc)
+#define WIN2_PAL_BASE (0x2c00)
+#define WIN2_PAL_END (0x2ffc)
+#define WIN3_PAL_BASE (0x3000)
+#define WIN3_PAL_END (0x33fc)
+#define WIN4_PAL_BASE (0x3400)
+#define WIN4_PAL_END (0x37fc)
+
+#define WIN0_PAL(_entry) (WIN0_PAL_BASE + ((_entry) * 4))
+#define WIN1_PAL(_entry) (WIN1_PAL_BASE + ((_entry) * 4))
+#define WIN2_PAL(_entry) (WIN2_PAL_BASE + ((_entry) * 4))
+#define WIN3_PAL(_entry) (WIN3_PAL_BASE + ((_entry) * 4))
+#define WIN4_PAL(_entry) (WIN4_PAL_BASE + ((_entry) * 4))
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+ switch (window) {
+ case 0: return WIN0_PAL(reg);
+ case 1: return WIN1_PAL(reg);
+ case 2: return WIN2_PAL(reg);
+ case 3: return WIN3_PAL(reg);
+ case 4: return WIN4_PAL(reg);
+ }
+
+ BUG();
+}
+
+
+#endif /* __ASM_ARCH_REGS_FB_H */
+
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index e390143..f0d31a2 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,14 +11,21 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
+#include <linux/io.h>
+#include <mach/map.h>
+#include <plat/regs-clock.h>
+
+void (*s5pc1xx_idle)(void);
+
static void arch_idle(void)
{
- /* nothing here yet */
+ if (s5pc1xx_idle)
+ s5pc1xx_idle();
}
static void arch_reset(char mode, const char *cmd)
{
- /* nothing here yet */
+ __raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
+ return;
}
-
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 214093c..ae3c52c 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -27,16 +27,22 @@
#include <asm/mach/map.h>
#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <video/platform_lcd.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-gpio.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/s5pc100.h>
+#include <plat/fb.h>
+#include <plat/iic.h>
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -73,9 +79,78 @@
},
};
+/* I2C0 */
+static struct i2c_board_info i2c_devs0[] __initdata = {
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c_devs1[] __initdata = {
+};
+
+/* LCD power controller */
+static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ /* backlight */
+ gpio_direction_output(S5PC100_GPD(0), power);
+
+ if (power) {
+ /* module reset */
+ gpio_direction_output(S5PC100_GPH0(6), 1);
+ mdelay(100);
+ gpio_direction_output(S5PC100_GPH0(6), 0);
+ mdelay(10);
+ gpio_direction_output(S5PC100_GPH0(6), 1);
+ mdelay(10);
+ }
+}
+
+static struct plat_lcd_data smdkc100_lcd_power_data = {
+ .set_power = smdkc100_lcd_power_set,
+};
+
+static struct platform_device smdkc100_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdkc100_lcd_power_data,
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdkc100_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .refresh = 70,
+ .pixclock = (8+13+3+800)*(7+5+1+480),
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
+ .win[0] = &smdkc100_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5pc100_fb_gpio_setup_24bpp,
+};
+
static struct map_desc smdkc100_iodesc[] = {};
static struct platform_device *smdkc100_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_fb,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ &smdkc100_lcd_powerdev,
};
static void __init smdkc100_map_io(void)
@@ -87,12 +162,24 @@
static void __init smdkc100_machine_init(void)
{
+ /* I2C */
+ s3c_i2c0_set_platdata(NULL);
+ s3c_i2c1_set_platdata(NULL);
+ i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+ i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+ s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+
+ /* LCD init */
+ gpio_request(S5PC100_GPD(0), "GPD");
+ gpio_request(S5PC100_GPH0(6), "GPH0");
+ smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
}
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
- .phys_io = S5PC1XX_PA_UART & 0xfff00000,
+ .phys_io = S5PC100_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S5PC100_PA_SDRAM + 0x100,
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
new file mode 100644
index 0000000..4385986
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
+ *
+ * Copyright 2008 Samsung Electronics
+ *
+ * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * Based on mach-s3c6410/setup-sdhci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pc100_hsmmc_clksrcs[4] = {
+ [0] = "hsmmc",
+ [1] = "hsmmc",
+ /* [2] = "mmc_bus", not yet succesfuuly used yet */
+ /* [3] = "48m", - note not succesfully used yet */
+};
+
+
+void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ /* don't need to alter anything acording to card-type */
+
+ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+ ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 4e5c07f..03a7f38 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -53,23 +53,23 @@
config SA1100_H3100
bool "Compaq iPAQ H3100"
+ select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
- <http://www.compaq.com/products/handhelds/pocketpc/>
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
+ select HTC_EGPIO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
- <http://www.compaq.com/products/handhelds/pocketpc/>
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index bb7b819..89349c1 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -25,8 +25,8 @@
obj-$(CONFIG_SA1100_COLLIE) += collie.o
-obj-$(CONFIG_SA1100_H3100) += h3600.o
-obj-$(CONFIG_SA1100_H3600) += h3600.o
+obj-$(CONFIG_SA1100_H3100) += h3100.o h3xxx.o
+obj-$(CONFIG_SA1100_H3600) += h3600.o h3xxx.o
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
led-$(CONFIG_SA1100_HACKKIT) += leds-hackkit.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 55e6447..169e5b8 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -249,10 +249,10 @@
#endif
}
- sa11x0_set_flash_data(&assabet_flash_data, assabet_flash_resources,
- ARRAY_SIZE(assabet_flash_resources));
- sa11x0_set_irda_data(&assabet_irda_data);
- sa11x0_set_mcp_data(&assabet_mcp_data);
+ sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
+ ARRAY_SIZE(assabet_flash_resources));
+ sa11x0_register_irda(&assabet_irda_data);
+ sa11x0_register_mcp(&assabet_mcp_data);
}
/*
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index ab5883b..051ec0f 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -212,7 +212,7 @@
/* maybe turn on 5v0 from the start */
badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on);
- sa11x0_set_flash_data(&badge4_flash_data, &badge4_flash_resource, 1);
+ sa11x0_register_mtd(&badge4_flash_data, &badge4_flash_resource, 1);
return 0;
}
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index fd3ad9c..bc950ef 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -129,8 +129,8 @@
static void __init cerf_init(void)
{
platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
- sa11x0_set_flash_data(&cerf_flash_data, &cerf_flash_resource, 1);
- sa11x0_set_mcp_data(&cerf_mcp_data);
+ sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
+ sa11x0_register_mcp(&cerf_mcp_data);
}
MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index bbf2ebc..9982c5c 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,6 +26,7 @@
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
#include <linux/gpio.h>
+#include <linux/pda_power.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -56,6 +57,7 @@
static struct scoop_config collie_scoop_setup = {
.io_dir = COLLIE_SCOOP_IO_DIR,
.io_out = COLLIE_SCOOP_IO_OUT,
+ .gpio_base = COLLIE_SCOOP_GPIO_BASE,
};
struct platform_device colliescoop_device = {
@@ -85,6 +87,70 @@
static struct mcp_plat_data collie_mcp_data = {
.mccr0 = MCCR0_ADM | MCCR0_ExtClk,
.sclk_rate = 9216000,
+ .gpio_base = COLLIE_TC35143_GPIO_BASE,
+};
+
+/*
+ * Collie AC IN
+ */
+static int collie_power_init(struct device *dev)
+{
+ int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
+ if (ret)
+ goto err_gpio_req;
+
+ ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
+ if (ret)
+ goto err_gpio_in;
+
+ return 0;
+
+err_gpio_in:
+ gpio_free(COLLIE_GPIO_AC_IN);
+err_gpio_req:
+ return ret;
+}
+
+static void collie_power_exit(struct device *dev)
+{
+ gpio_free(COLLIE_GPIO_AC_IN);
+}
+
+static int collie_power_ac_online(void)
+{
+ return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
+}
+
+static char *collie_ac_supplied_to[] = {
+ "main-battery",
+ "backup-battery",
+};
+
+static struct pda_power_pdata collie_power_data = {
+ .init = collie_power_init,
+ .is_ac_online = collie_power_ac_online,
+ .exit = collie_power_exit,
+ .supplied_to = collie_ac_supplied_to,
+ .num_supplicants = ARRAY_SIZE(collie_ac_supplied_to),
+};
+
+static struct resource collie_power_resource[] = {
+ {
+ .name = "ac",
+ .start = gpio_to_irq(COLLIE_GPIO_AC_IN),
+ .end = gpio_to_irq(COLLIE_GPIO_AC_IN),
+ .flags = IORESOURCE_IRQ |
+ IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_LOWEDGE,
+ },
+};
+
+static struct platform_device collie_power_device = {
+ .name = "pda-power",
+ .id = -1,
+ .dev.platform_data = &collie_power_data,
+ .resource = collie_power_resource,
+ .num_resources = ARRAY_SIZE(collie_power_resource),
};
#ifdef CONFIG_SHARP_LOCOMO
@@ -178,6 +244,7 @@
static struct platform_device *devices[] __initdata = {
&collie_locomo_device,
&colliescoop_device,
+ &collie_power_device,
};
static struct mtd_partition collie_partitions[] = {
@@ -248,22 +315,24 @@
GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
- COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
- COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+ _COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
+ _COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
- PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
- COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+ PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
+ _COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
- PGSR = COLLIE_GPIO_nREMOCON_ON;
+ PGSR = _COLLIE_GPIO_nREMOCON_ON;
PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
PCFR = PCFR_OPDE;
+ GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
+
platform_scoop_config = &collie_pcmcia_config;
@@ -272,9 +341,9 @@
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
}
- sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
- ARRAY_SIZE(collie_flash_resources));
- sa11x0_set_mcp_data(&collie_mcp_data);
+ sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
+ ARRAY_SIZE(collie_flash_resources));
+ sa11x0_register_mcp(&collie_mcp_data);
sharpsl_save_param();
}
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 23cfdd5..9faea15 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -162,6 +162,17 @@
PMCR = PMCR_SF;
}
+static void sa11x0_register_device(struct platform_device *dev, void *data)
+{
+ int err;
+ dev->dev.platform_data = data;
+ err = platform_device_register(dev);
+ if (err)
+ printk(KERN_ERR "Unable to register device %s: %d\n",
+ dev->name, err);
+}
+
+
static struct resource sa11x0udc_resources[] = {
[0] = {
.start = 0x80000000,
@@ -234,9 +245,9 @@
.resource = sa11x0mcp_resources,
};
-void sa11x0_set_mcp_data(struct mcp_plat_data *data)
+void sa11x0_register_mcp(struct mcp_plat_data *data)
{
- sa11x0mcp_device.dev.platform_data = data;
+ sa11x0_register_device(&sa11x0mcp_device, data);
}
static struct resource sa11x0ssp_resources[] = {
@@ -293,13 +304,13 @@
.id = -1,
};
-void sa11x0_set_flash_data(struct flash_platform_data *flash,
- struct resource *res, int nr)
+void sa11x0_register_mtd(struct flash_platform_data *flash,
+ struct resource *res, int nr)
{
flash->name = "sa1100";
- sa11x0mtd_device.dev.platform_data = flash;
sa11x0mtd_device.resource = res;
sa11x0mtd_device.num_resources = nr;
+ sa11x0_register_device(&sa11x0mtd_device, flash);
}
static struct resource sa11x0ir_resources[] = {
@@ -329,9 +340,9 @@
.resource = sa11x0ir_resources,
};
-void sa11x0_set_irda_data(struct irda_platform_data *irda)
+void sa11x0_register_irda(struct irda_platform_data *irda)
{
- sa11x0ir_device.dev.platform_data = irda;
+ sa11x0_register_device(&sa11x0ir_device, irda);
}
static struct platform_device sa11x0rtc_device = {
@@ -343,21 +354,15 @@
&sa11x0udc_device,
&sa11x0uart1_device,
&sa11x0uart3_device,
- &sa11x0mcp_device,
&sa11x0ssp_device,
&sa11x0pcmcia_device,
&sa11x0fb_device,
- &sa11x0mtd_device,
&sa11x0rtc_device,
};
static int __init sa1100_init(void)
{
pm_power_off = sa1100_power_off;
-
- if (sa11x0ir_device.dev.platform_data)
- platform_device_register(&sa11x0ir_device);
-
return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
}
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 793c2e6..ec03f18 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -32,14 +32,11 @@
struct flash_platform_data;
struct resource;
-extern void sa11x0_set_flash_data(struct flash_platform_data *flash,
- struct resource *res, int nr);
-
-struct sa11x0_ssp_plat_ops;
-extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops);
+void sa11x0_register_mtd(struct flash_platform_data *flash,
+ struct resource *res, int nr);
struct irda_platform_data;
-void sa11x0_set_irda_data(struct irda_platform_data *irda);
+void sa11x0_register_irda(struct irda_platform_data *irda);
struct mcp_plat_data;
-void sa11x0_set_mcp_data(struct mcp_plat_data *data);
+void sa11x0_register_mcp(struct mcp_plat_data *data);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
new file mode 100644
index 0000000..0c7cea0
--- /dev/null
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -0,0 +1,95 @@
+/*
+ * Support for Compaq iPAQ H3100 handheld computer
+ *
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irda.h>
+
+#include <mach/h3xxx.h>
+
+#include "generic.h"
+
+/*
+ * helper for sa1100fb
+ */
+static void h3100_lcd_power(int enable)
+{
+ if (!gpio_request(H3XXX_EGPIO_LCD_ON, "LCD ON")) {
+ gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
+ gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+ gpio_free(H3XXX_EGPIO_LCD_ON);
+ } else {
+ pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
+ }
+}
+
+
+static void __init h3100_map_io(void)
+{
+ h3xxx_map_io();
+
+ sa1100fb_lcd_power = h3100_lcd_power;
+
+ /* Older bootldrs put GPIO2-9 in alternate mode on the
+ assumption that they are used for video */
+ GAFR &= ~0x000001fb;
+}
+
+/*
+ * This turns the IRDA power on or off on the Compaq H3100
+ */
+static int h3100_irda_set_power(struct device *dev, unsigned int state)
+{
+ gpio_set_value(H3100_GPIO_IR_ON, state);
+ return 0;
+}
+
+static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
+{
+ gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
+}
+
+static struct irda_platform_data h3100_irda_data = {
+ .set_power = h3100_irda_set_power,
+ .set_speed = h3100_irda_set_speed,
+};
+
+static struct gpio_default_state h3100_default_gpio[] = {
+ { H3100_GPIO_IR_ON, GPIO_MODE_OUT0, "IrDA power" },
+ { H3100_GPIO_IR_FSEL, GPIO_MODE_OUT0, "IrDA fsel" },
+ { H3XXX_GPIO_COM_DCD, GPIO_MODE_IN, "COM DCD" },
+ { H3XXX_GPIO_COM_CTS, GPIO_MODE_IN, "COM CTS" },
+ { H3XXX_GPIO_COM_RTS, GPIO_MODE_OUT0, "COM RTS" },
+ { H3100_GPIO_LCD_3V_ON, GPIO_MODE_OUT0, "LCD 3v" },
+};
+
+static void __init h3100_mach_init(void)
+{
+ h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
+ h3xxx_mach_init();
+ sa11x0_register_irda(&h3100_irda_data);
+}
+
+MACHINE_START(H3100, "Compaq iPAQ H3100")
+ .phys_io = 0x80000000,
+ .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
+ .boot_params = 0xc0000100,
+ .map_io = h3100_map_io,
+ .init_irq = sa1100_init_irq,
+ .timer = &sa1100_timer,
+ .init_machine = h3100_mach_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 0eb2f15..af3b714 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -1,421 +1,127 @@
/*
- * Hardware definitions for Compaq iPAQ H3xxx Handheld Computers
+ * Support for Compaq iPAQ H3600 handheld computer
*
- * Copyright 2000,1 Compaq Computer Corporation.
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
*
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-?? Andrew Christian Added support for iPAQ H3800
- * and abstracted EGPIO interface.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
*
*/
-#include <linux/module.h>
+
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/pm.h>
-#include <linux/device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/serial_core.h>
+#include <linux/gpio.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
#include <asm/mach/irda.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
-#include <mach/h3600.h>
-#include <mach/h3600_gpio.h>
+#include <mach/h3xxx.h>
#include "generic.h"
-void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-EXPORT_SYMBOL(assign_h3600_egpio);
-
-static struct mtd_partition h3xxx_partitions[] = {
- {
- .name = "H3XXX boot firmware",
- .size = 0x00040000,
- .offset = 0,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- }, {
- .name = "H3XXX rootfs",
- .size = MTDPART_SIZ_FULL,
- .offset = 0x00040000,
- }
-};
-
-static void h3xxx_set_vpp(int vpp)
-{
- assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, vpp);
-}
-
-static struct flash_platform_data h3xxx_flash_data = {
- .map_name = "cfi_probe",
- .set_vpp = h3xxx_set_vpp,
- .parts = h3xxx_partitions,
- .nr_parts = ARRAY_SIZE(h3xxx_partitions),
-};
-
-static struct resource h3xxx_flash_resource = {
- .start = SA1100_CS0_PHYS,
- .end = SA1100_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-/*
- * This turns the IRDA power on or off on the Compaq H3600
- */
-static int h3600_irda_set_power(struct device *dev, unsigned int state)
-{
- assign_h3600_egpio( IPAQ_EGPIO_IR_ON, state );
-
- return 0;
-}
-
-static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
-{
- assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static struct irda_platform_data h3600_irda_data = {
- .set_power = h3600_irda_set_power,
- .set_speed = h3600_irda_set_speed,
-};
-
-static void h3xxx_mach_init(void)
-{
- sa11x0_set_flash_data(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
- sa11x0_set_irda_data(&h3600_irda_data);
-}
-
-/*
- * low-level UART features
- */
-
-static void h3600_uart_set_mctrl(struct uart_port *port, u_int mctrl)
-{
- if (port->mapbase == _Ser3UTCR0) {
- if (mctrl & TIOCM_RTS)
- GPCR = GPIO_H3600_COM_RTS;
- else
- GPSR = GPIO_H3600_COM_RTS;
- }
-}
-
-static u_int h3600_uart_get_mctrl(struct uart_port *port)
-{
- u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
- if (port->mapbase == _Ser3UTCR0) {
- int gplr = GPLR;
- /* DCD and CTS bits are inverted in GPLR by RS232 transceiver */
- if (gplr & GPIO_H3600_COM_DCD)
- ret &= ~TIOCM_CD;
- if (gplr & GPIO_H3600_COM_CTS)
- ret &= ~TIOCM_CTS;
- }
-
- return ret;
-}
-
-static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
- if (port->mapbase == _Ser2UTCR0) { /* TODO: REMOVE THIS */
- assign_h3600_egpio(IPAQ_EGPIO_IR_ON, !state);
- } else if (port->mapbase == _Ser3UTCR0) {
- assign_h3600_egpio(IPAQ_EGPIO_RS232_ON, !state);
- }
-}
-
-/*
- * Enable/Disable wake up events for this serial port.
- * Obviously, we only support this on the normal COM port.
- */
-static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
-{
- int err = -EINVAL;
-
- if (port->mapbase == _Ser3UTCR0) {
- if (enable)
- PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
- else
- PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
- err = 0;
- }
- return err;
-}
-
-static struct sa1100_port_fns h3600_port_fns __initdata = {
- .set_mctrl = h3600_uart_set_mctrl,
- .get_mctrl = h3600_uart_get_mctrl,
- .pm = h3600_uart_pm,
- .set_wake = h3600_uart_set_wake,
-};
-
/*
* helper for sa1100fb
*/
-static void h3xxx_lcd_power(int enable)
+static void h3600_lcd_power(int enable)
{
- assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
-}
-
-static struct map_desc h3600_io_desc[] __initdata = {
- { /* static memory bank 2 CS#2 */
- .virtual = H3600_BANK_2_VIRT,
- .pfn = __phys_to_pfn(SA1100_CS2_PHYS),
- .length = 0x02800000,
- .type = MT_DEVICE
- }, { /* static memory bank 4 CS#4 */
- .virtual = H3600_BANK_4_VIRT,
- .pfn = __phys_to_pfn(SA1100_CS4_PHYS),
- .length = 0x00800000,
- .type = MT_DEVICE
- }, { /* EGPIO 0 CS#5 */
- .virtual = H3600_EGPIO_VIRT,
- .pfn = __phys_to_pfn(H3600_EGPIO_PHYS),
- .length = 0x01000000,
- .type = MT_DEVICE
+ if (gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power")) {
+ pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
+ goto err1;
}
-};
-
-/*
- * Common map_io initialization
- */
-
-static void __init h3xxx_map_io(void)
-{
- sa1100_map_io();
- iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
-
- sa1100_register_uart_fns(&h3600_port_fns);
- sa1100_register_uart(0, 3); /* Common serial port */
-// sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
-
- /* Ensure those pins are outputs and driving low */
- PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
- PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
- /* Configure suspend conditions */
- PGSR = 0;
- PWER = PWER_GPIO0 | PWER_RTC;
- PCFR = PCFR_OPDE;
- PSDR = 0;
-
- sa1100fb_lcd_power = h3xxx_lcd_power;
-}
-
-/************************* H3100 *************************/
-
-#ifdef CONFIG_SA1100_H3100
-
-#define H3100_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3100_egpio = 0;
-
-static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
-{
- unsigned int egpio = 0;
- long gpio = 0;
- unsigned long flags;
-
- switch (x) {
- case IPAQ_EGPIO_LCD_POWER:
- egpio |= EGPIO_H3600_LCD_ON;
- gpio |= GPIO_H3100_LCD_3V_ON;
- break;
- case IPAQ_EGPIO_LCD_ENABLE:
- break;
- case IPAQ_EGPIO_CODEC_NRESET:
- egpio |= EGPIO_H3600_CODEC_NRESET;
- break;
- case IPAQ_EGPIO_AUDIO_ON:
- gpio |= GPIO_H3100_AUD_PWR_ON
- | GPIO_H3100_AUD_ON;
- break;
- case IPAQ_EGPIO_QMUTE:
- gpio |= GPIO_H3100_QMUTE;
- break;
- case IPAQ_EGPIO_OPT_NVRAM_ON:
- egpio |= EGPIO_H3600_OPT_NVRAM_ON;
- break;
- case IPAQ_EGPIO_OPT_ON:
- egpio |= EGPIO_H3600_OPT_ON;
- break;
- case IPAQ_EGPIO_CARD_RESET:
- egpio |= EGPIO_H3600_CARD_RESET;
- break;
- case IPAQ_EGPIO_OPT_RESET:
- egpio |= EGPIO_H3600_OPT_RESET;
- break;
- case IPAQ_EGPIO_IR_ON:
- gpio |= GPIO_H3100_IR_ON;
- break;
- case IPAQ_EGPIO_IR_FSEL:
- gpio |= GPIO_H3100_IR_FSEL;
- break;
- case IPAQ_EGPIO_RS232_ON:
- egpio |= EGPIO_H3600_RS232_ON;
- break;
- case IPAQ_EGPIO_VPP_ON:
- egpio |= EGPIO_H3600_VPP_ON;
- break;
+ if (gpio_request(H3600_EGPIO_LCD_PCI, "LCD control")) {
+ pr_err("%s: can't request H3XXX_EGPIO_LCD_PCI\n", __func__);
+ goto err2;
+ }
+ if (gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v")) {
+ pr_err("%s: can't request H3XXX_EGPIO_LCD_5V_ON\n", __func__);
+ goto err3;
+ }
+ if (gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v")) {
+ pr_err("%s: can't request H3600_EGPIO_LVDD_ON\n", __func__);
+ goto err4;
}
- if (egpio || gpio) {
- local_irq_save(flags);
- if (setp) {
- h3100_egpio |= egpio;
- GPSR = gpio;
- } else {
- h3100_egpio &= ~egpio;
- GPCR = gpio;
- }
- H3100_EGPIO = h3100_egpio;
- local_irq_restore(flags);
- }
-}
+ gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+ gpio_direction_output(H3600_EGPIO_LCD_PCI, enable);
+ gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable);
+ gpio_direction_output(H3600_EGPIO_LVDD_ON, enable);
-#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \
- | GPIO_H3100_GPIO3 \
- | GPIO_H3100_QMUTE \
- | GPIO_H3100_LCD_3V_ON \
- | GPIO_H3100_AUD_ON \
- | GPIO_H3100_AUD_PWR_ON \
- | GPIO_H3100_IR_ON \
- | GPIO_H3100_IR_FSEL)
-
-static void __init h3100_map_io(void)
-{
- h3xxx_map_io();
-
- /* Initialize h3100-specific values here */
- GPCR = 0x0fffffff; /* All outputs are set low by default */
- GPDR = GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
- GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
- GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
- H3100_DIRECT_EGPIO;
-
- /* Older bootldrs put GPIO2-9 in alternate mode on the
- assumption that they are used for video */
- GAFR &= ~H3100_DIRECT_EGPIO;
-
- H3100_EGPIO = h3100_egpio;
- assign_h3600_egpio = h3100_control_egpio;
-}
-
-MACHINE_START(H3100, "Compaq iPAQ H3100")
- .phys_io = 0x80000000,
- .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
- .boot_params = 0xc0000100,
- .map_io = h3100_map_io,
- .init_irq = sa1100_init_irq,
- .timer = &sa1100_timer,
- .init_machine = h3xxx_mach_init,
-MACHINE_END
-
-#endif /* CONFIG_SA1100_H3100 */
-
-/************************* H3600 *************************/
-
-#ifdef CONFIG_SA1100_H3600
-
-#define H3600_EGPIO (*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
-
-static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
-{
- unsigned int egpio = 0;
- unsigned long flags;
-
- switch (x) {
- case IPAQ_EGPIO_LCD_POWER:
- egpio |= EGPIO_H3600_LCD_ON |
- EGPIO_H3600_LCD_PCI |
- EGPIO_H3600_LCD_5V_ON |
- EGPIO_H3600_LVDD_ON;
- break;
- case IPAQ_EGPIO_LCD_ENABLE:
- break;
- case IPAQ_EGPIO_CODEC_NRESET:
- egpio |= EGPIO_H3600_CODEC_NRESET;
- break;
- case IPAQ_EGPIO_AUDIO_ON:
- egpio |= EGPIO_H3600_AUD_AMP_ON |
- EGPIO_H3600_AUD_PWR_ON;
- break;
- case IPAQ_EGPIO_QMUTE:
- egpio |= EGPIO_H3600_QMUTE;
- break;
- case IPAQ_EGPIO_OPT_NVRAM_ON:
- egpio |= EGPIO_H3600_OPT_NVRAM_ON;
- break;
- case IPAQ_EGPIO_OPT_ON:
- egpio |= EGPIO_H3600_OPT_ON;
- break;
- case IPAQ_EGPIO_CARD_RESET:
- egpio |= EGPIO_H3600_CARD_RESET;
- break;
- case IPAQ_EGPIO_OPT_RESET:
- egpio |= EGPIO_H3600_OPT_RESET;
- break;
- case IPAQ_EGPIO_IR_ON:
- egpio |= EGPIO_H3600_IR_ON;
- break;
- case IPAQ_EGPIO_IR_FSEL:
- egpio |= EGPIO_H3600_IR_FSEL;
- break;
- case IPAQ_EGPIO_RS232_ON:
- egpio |= EGPIO_H3600_RS232_ON;
- break;
- case IPAQ_EGPIO_VPP_ON:
- egpio |= EGPIO_H3600_VPP_ON;
- break;
- }
-
- if (egpio) {
- local_irq_save(flags);
- if (setp)
- h3600_egpio |= egpio;
- else
- h3600_egpio &= ~egpio;
- H3600_EGPIO = h3600_egpio;
- local_irq_restore(flags);
- }
+ gpio_free(H3600_EGPIO_LVDD_ON);
+err4: gpio_free(H3600_EGPIO_LCD_5V_ON);
+err3: gpio_free(H3600_EGPIO_LCD_PCI);
+err2: gpio_free(H3XXX_EGPIO_LCD_ON);
+err1: return;
}
static void __init h3600_map_io(void)
{
h3xxx_map_io();
- /* Initialize h3600-specific values here */
+ sa1100fb_lcd_power = h3600_lcd_power;
+}
- GPCR = 0x0fffffff; /* All outputs are set low by default */
- GPDR = GPIO_H3600_COM_RTS | GPIO_H3600_L3_CLOCK |
- GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA |
- GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
- GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
- GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
+/*
+ * This turns the IRDA power on or off on the Compaq H3600
+ */
+static int h3600_irda_set_power(struct device *dev, unsigned int state)
+{
+ gpio_set_value(H3600_EGPIO_IR_ON, state);
+ return 0;
+}
- H3600_EGPIO = h3600_egpio; /* Maintains across sleep? */
- assign_h3600_egpio = h3600_control_egpio;
+static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
+{
+ gpio_set_value(H3600_EGPIO_IR_FSEL, !(speed < 4000000));
+}
+
+static int h3600_irda_startup(struct device *dev)
+{
+ int err = gpio_request(H3600_EGPIO_IR_ON, "IrDA power");
+ if (err)
+ goto err1;
+ err = gpio_direction_output(H3600_EGPIO_IR_ON, 0);
+ if (err)
+ goto err2;
+ err = gpio_request(H3600_EGPIO_IR_FSEL, "IrDA fsel");
+ if (err)
+ goto err2;
+ err = gpio_direction_output(H3600_EGPIO_IR_FSEL, 0);
+ if (err)
+ goto err3;
+ return 0;
+
+err3: gpio_free(H3600_EGPIO_IR_FSEL);
+err2: gpio_free(H3600_EGPIO_IR_ON);
+err1: return err;
+}
+
+static void h3600_irda_shutdown(struct device *dev)
+{
+ gpio_free(H3600_EGPIO_IR_ON);
+ gpio_free(H3600_EGPIO_IR_FSEL);
+}
+
+static struct irda_platform_data h3600_irda_data = {
+ .set_power = h3600_irda_set_power,
+ .set_speed = h3600_irda_set_speed,
+ .startup = h3600_irda_startup,
+ .shutdown = h3600_irda_shutdown,
+};
+
+static struct gpio_default_state h3600_default_gpio[] = {
+ { H3XXX_GPIO_COM_DCD, GPIO_MODE_IN, "COM DCD" },
+ { H3XXX_GPIO_COM_CTS, GPIO_MODE_IN, "COM CTS" },
+ { H3XXX_GPIO_COM_RTS, GPIO_MODE_OUT0, "COM RTS" },
+};
+
+static void __init h3600_mach_init(void)
+{
+ h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
+ h3xxx_mach_init();
+ sa11x0_register_irda(&h3600_irda_data);
}
MACHINE_START(H3600, "Compaq iPAQ H3600")
@@ -425,8 +131,6 @@
.map_io = h3600_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
- .init_machine = h3xxx_mach_init,
+ .init_machine = h3600_mach_init,
MACHINE_END
-#endif /* CONFIG_SA1100_H3600 */
-
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
new file mode 100644
index 0000000..b0784c9
--- /dev/null
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -0,0 +1,313 @@
+/*
+ * Support for Compaq iPAQ H3100 and H3600 handheld computers (common code)
+ *
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <mach/h3xxx.h>
+
+#include "generic.h"
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n)
+{
+ while (n--) {
+ const char *name = s->name;
+ int err;
+
+ if (!name)
+ name = "[init]";
+ err = gpio_request(s->gpio, name);
+ if (err) {
+ printk(KERN_ERR "gpio%u: unable to request: %d\n",
+ s->gpio, err);
+ continue;
+ }
+ if (s->mode >= 0) {
+ err = gpio_direction_output(s->gpio, s->mode);
+ } else {
+ err = gpio_direction_input(s->gpio);
+ }
+ if (err) {
+ printk(KERN_ERR "gpio%u: unable to set direction: %d\n",
+ s->gpio, err);
+ continue;
+ }
+ if (!s->name)
+ gpio_free(s->gpio);
+ s++;
+ }
+}
+
+
+/*
+ * H3xxx flash support
+ */
+static struct mtd_partition h3xxx_partitions[] = {
+ {
+ .name = "H3XXX boot firmware",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "H3XXX rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00040000,
+ }
+};
+
+static void h3xxx_set_vpp(int vpp)
+{
+ gpio_set_value(H3XXX_EGPIO_VPP_ON, vpp);
+}
+
+static int h3xxx_flash_init(void)
+{
+ int err = gpio_request(H3XXX_EGPIO_VPP_ON, "Flash Vpp");
+ if (err) {
+ pr_err("%s: can't request H3XXX_EGPIO_VPP_ON\n", __func__);
+ return err;
+ }
+
+ err = gpio_direction_output(H3XXX_EGPIO_VPP_ON, 0);
+ if (err)
+ gpio_free(H3XXX_EGPIO_VPP_ON);
+
+ return err;
+}
+
+static void h3xxx_flash_exit(void)
+{
+ gpio_free(H3XXX_EGPIO_VPP_ON);
+}
+
+static struct flash_platform_data h3xxx_flash_data = {
+ .map_name = "cfi_probe",
+ .set_vpp = h3xxx_set_vpp,
+ .init = h3xxx_flash_init,
+ .exit = h3xxx_flash_exit,
+ .parts = h3xxx_partitions,
+ .nr_parts = ARRAY_SIZE(h3xxx_partitions),
+};
+
+static struct resource h3xxx_flash_resource = {
+ .start = SA1100_CS0_PHYS,
+ .end = SA1100_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+
+/*
+ * H3xxx uart support
+ */
+static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+ if (port->mapbase == _Ser3UTCR0) {
+ gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
+ }
+}
+
+static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
+{
+ u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
+
+ if (port->mapbase == _Ser3UTCR0) {
+ /*
+ * DCD and CTS bits are inverted in GPLR by RS232 transceiver
+ */
+ if (gpio_get_value(H3XXX_GPIO_COM_DCD))
+ ret &= ~TIOCM_CD;
+ if (gpio_get_value(H3XXX_GPIO_COM_CTS))
+ ret &= ~TIOCM_CTS;
+ }
+
+ return ret;
+}
+
+static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+{
+ if (port->mapbase == _Ser3UTCR0) {
+ if (!gpio_request(H3XXX_EGPIO_RS232_ON, "RS232 transceiver")) {
+ gpio_direction_output(H3XXX_EGPIO_RS232_ON, !state);
+ gpio_free(H3XXX_EGPIO_RS232_ON);
+ } else {
+ pr_err("%s: can't request H3XXX_EGPIO_RS232_ON\n",
+ __func__);
+ }
+ }
+}
+
+/*
+ * Enable/Disable wake up events for this serial port.
+ * Obviously, we only support this on the normal COM port.
+ */
+static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
+{
+ int err = -EINVAL;
+
+ if (port->mapbase == _Ser3UTCR0) {
+ if (enable)
+ PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
+ else
+ PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
+ err = 0;
+ }
+ return err;
+}
+
+static struct sa1100_port_fns h3xxx_port_fns __initdata = {
+ .set_mctrl = h3xxx_uart_set_mctrl,
+ .get_mctrl = h3xxx_uart_get_mctrl,
+ .pm = h3xxx_uart_pm,
+ .set_wake = h3xxx_uart_set_wake,
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+ [0] = {
+ .start = H3600_EGPIO_PHYS,
+ .end = H3600_EGPIO_PHYS + 0x4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+ [0] = {
+ .reg_start = 0,
+ .gpio_base = H3XXX_EGPIO_BASE,
+ .num_gpios = 16,
+ .direction = HTC_EGPIO_OUTPUT,
+ .initial_values = 0x0080, /* H3XXX_EGPIO_RS232_ON */
+ },
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+ .reg_width = 16,
+ .bus_width = 16,
+ .chip = egpio_chips,
+ .num_chips = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device h3xxx_egpio = {
+ .name = "htc-egpio",
+ .id = -1,
+ .resource = egpio_resources,
+ .num_resources = ARRAY_SIZE(egpio_resources),
+ .dev = {
+ .platform_data = &egpio_info,
+ },
+};
+
+/*
+ * GPIO keys
+ */
+
+static struct gpio_keys_button h3xxx_button_table[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = H3XXX_GPIO_PWR_BUTTON,
+ .desc = "Power Button",
+ .active_low = 1,
+ .type = EV_KEY,
+ .wakeup = 1,
+ }, {
+ .code = KEY_ENTER,
+ .gpio = H3XXX_GPIO_ACTION_BUTTON,
+ .active_low = 1,
+ .desc = "Action button",
+ .type = EV_KEY,
+ .wakeup = 0,
+ },
+};
+
+static struct gpio_keys_platform_data h3xxx_keys_data = {
+ .buttons = h3xxx_button_table,
+ .nbuttons = ARRAY_SIZE(h3xxx_button_table),
+};
+
+static struct platform_device h3xxx_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &h3xxx_keys_data,
+ },
+};
+
+static struct platform_device *h3xxx_devices[] = {
+ &h3xxx_egpio,
+ &h3xxx_keys,
+};
+
+void __init h3xxx_mach_init(void)
+{
+ sa1100_register_uart_fns(&h3xxx_port_fns);
+ sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
+ platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
+}
+
+static struct map_desc h3600_io_desc[] __initdata = {
+ { /* static memory bank 2 CS#2 */
+ .virtual = H3600_BANK_2_VIRT,
+ .pfn = __phys_to_pfn(SA1100_CS2_PHYS),
+ .length = 0x02800000,
+ .type = MT_DEVICE
+ }, { /* static memory bank 4 CS#4 */
+ .virtual = H3600_BANK_4_VIRT,
+ .pfn = __phys_to_pfn(SA1100_CS4_PHYS),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }, { /* EGPIO 0 CS#5 */
+ .virtual = H3600_EGPIO_VIRT,
+ .pfn = __phys_to_pfn(H3600_EGPIO_PHYS),
+ .length = 0x01000000,
+ .type = MT_DEVICE
+ }
+};
+
+/*
+ * Common map_io initialization
+ */
+
+void __init h3xxx_map_io(void)
+{
+ sa1100_map_io();
+ iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
+
+ sa1100_register_uart(0, 3); /* Common serial port */
+// sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
+
+ /* Ensure those pins are outputs and driving low */
+ PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
+ /* Configure suspend conditions */
+ PGSR = 0;
+ PCFR = PCFR_OPDE;
+ PSDR = 0;
+
+ GPCR = 0x0fffffff; /* All outputs are set low by default */
+ GPDR = 0; /* Configure all GPIOs as input */
+}
+
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index e7056c0..51568df 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -187,7 +187,7 @@
static void __init hackkit_init(void)
{
- sa11x0_set_flash_data(&hackkit_flash_data, &hackkit_flash_resource, 1);
+ sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
}
/**********************************************************************
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 9efb569..71a0b3f 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -25,29 +25,39 @@
#define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7)
#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
-#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+#define COLLIE_SCOOP_IO_DIR (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
- COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
+ COLLIE_SCP_LB_VOL_CHG)
+#define COLLIE_SCOOP_IO_OUT (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
-/* GPIOs for which the generic definition doesn't say much */
+/* GPIOs for gpiolib */
-#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)
-#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)
-#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)
-#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)
-#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)
-#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)
-#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)
-#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)
-#define COLLIE_GPIO_CO GPIO_GPIO (20)
-#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)
-#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)
-#define COLLIE_GPIO_UCB1x00_IRQ GPIO_GPIO (23)
-#define COLLIE_GPIO_WAKEUP GPIO_GPIO (24)
-#define COLLIE_GPIO_GA_INT GPIO_GPIO (25)
-#define COLLIE_GPIO_MAIN_BAT_LOW GPIO_GPIO (26)
+#define COLLIE_GPIO_ON_KEY (0)
+#define COLLIE_GPIO_AC_IN (1)
+#define COLLIE_GPIO_SDIO_INT (11)
+#define COLLIE_GPIO_CF_IRQ (14)
+#define COLLIE_GPIO_nREMOCON_INT (15)
+#define COLLIE_GPIO_UCB1x00_RESET (16)
+#define COLLIE_GPIO_nMIC_ON (17)
+#define COLLIE_GPIO_nREMOCON_ON (18)
+#define COLLIE_GPIO_CO (20)
+#define COLLIE_GPIO_MCP_CLK (21)
+#define COLLIE_GPIO_CF_CD (22)
+#define COLLIE_GPIO_UCB1x00_IRQ (23)
+#define COLLIE_GPIO_WAKEUP (24)
+#define COLLIE_GPIO_GA_INT (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW (26)
+/* GPIO definitions for direct register access */
+
+#define _COLLIE_GPIO_ON_KEY GPIO_GPIO(0)
+#define _COLLIE_GPIO_AC_IN GPIO_GPIO(1)
+#define _COLLIE_GPIO_nREMOCON_INT GPIO_GPIO(15)
+#define _COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO(16)
+#define _COLLIE_GPIO_nMIC_ON GPIO_GPIO(17)
+#define _COLLIE_GPIO_nREMOCON_ON GPIO_GPIO(18)
+#define _COLLIE_GPIO_CO GPIO_GPIO(20)
+#define _COLLIE_GPIO_WAKEUP GPIO_GPIO(24)
/* Interrupts */
#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
@@ -70,19 +80,20 @@
#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14
/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */
-#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */
-#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */
-#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */
-#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */
-#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */
-#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */
-#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */
-#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */
-#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */
-#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
-#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
- UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+#define COLLIE_TC35143_GPIO_BASE (GPIO_MAX + 13)
+#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0
+#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1
+#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2
+#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3
+#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4
+#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5
+#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
+#define COLLIE_GPIO_MBAT_ON (COLLIE_TC35143_GPIO_BASE + 7)
+#define COLLIE_GPIO_BBAT_ON (COLLIE_TC35143_GPIO_BASE + 8)
+#define COLLIE_GPIO_TMP_ON (COLLIE_TC35143_GPIO_BASE + 9)
+#define COLLIE_TC35143_GPIO_IN (UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
+#define COLLIE_TC35143_GPIO_OUT (UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
+ | UCB_IO_6)
#endif
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 582a0c9..7befc10 100644
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -49,20 +49,9 @@
#define gpio_cansleep __gpio_cansleep
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
- if (gpio < 11)
- return IRQ_GPIO0 + gpio;
- else
- return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
- if (irq < IRQ_GPIO11_27)
- return irq - IRQ_GPIO0;
- else
- return irq - IRQ_GPIO11 + 11;
-}
+#define gpio_to_irq(gpio) ((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
+ (IRQ_GPIO11 - 11 + gpio))
+#define irq_to_gpio(irq) ((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
+ (irq - IRQ_GPIO11 + 11))
#endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
deleted file mode 100644
index 2827faa..0000000
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-?? Andrew Christian Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_H_
-#define _INCLUDE_H3600_H_
-
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */
-#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */
-
-/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT 0xf0000000
-#define H3600_BANK_2_VIRT 0xf1000000
-#define H3600_BANK_4_VIRT 0xf3800000
-
-/*
- Machine-independent GPIO definitions
- --- these are common across all current iPAQ platforms
-*/
-
-#define GPIO_H3600_NPOWER_BUTTON GPIO_GPIO (0) /* Also known as the "off button" */
-
-#define GPIO_H3600_PCMCIA_CD1 GPIO_GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ1 GPIO_GPIO (11)
-
-/* UDA1341 L3 Interface */
-#define GPIO_H3600_L3_DATA GPIO_GPIO (14)
-#define GPIO_H3600_L3_MODE GPIO_GPIO (15)
-#define GPIO_H3600_L3_CLOCK GPIO_GPIO (16)
-
-#define GPIO_H3600_PCMCIA_CD0 GPIO_GPIO (17)
-#define GPIO_H3600_SYS_CLK GPIO_GPIO (19)
-#define GPIO_H3600_PCMCIA_IRQ0 GPIO_GPIO (21)
-
-#define GPIO_H3600_COM_DCD GPIO_GPIO (23)
-#define GPIO_H3600_OPT_IRQ GPIO_GPIO (24)
-#define GPIO_H3600_COM_CTS GPIO_GPIO (25)
-#define GPIO_H3600_COM_RTS GPIO_GPIO (26)
-
-#define IRQ_GPIO_H3600_NPOWER_BUTTON IRQ_GPIO0
-#define IRQ_GPIO_H3600_PCMCIA_CD1 IRQ_GPIO10
-#define IRQ_GPIO_H3600_PCMCIA_IRQ1 IRQ_GPIO11
-#define IRQ_GPIO_H3600_PCMCIA_CD0 IRQ_GPIO17
-#define IRQ_GPIO_H3600_PCMCIA_IRQ0 IRQ_GPIO21
-#define IRQ_GPIO_H3600_COM_DCD IRQ_GPIO23
-#define IRQ_GPIO_H3600_OPT_IRQ IRQ_GPIO24
-#define IRQ_GPIO_H3600_COM_CTS IRQ_GPIO25
-
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
- IPAQ_EGPIO_LCD_POWER, /* Power to the LCD panel */
- IPAQ_EGPIO_CODEC_NRESET, /* Clear to reset the audio codec (remember to return high) */
- IPAQ_EGPIO_AUDIO_ON, /* Audio power */
- IPAQ_EGPIO_QMUTE, /* Audio muting */
- IPAQ_EGPIO_OPT_NVRAM_ON, /* Non-volatile RAM on extension sleeves (SPI interface) */
- IPAQ_EGPIO_OPT_ON, /* Power to extension sleeves */
- IPAQ_EGPIO_CARD_RESET, /* Reset PCMCIA cards on extension sleeve (???) */
- IPAQ_EGPIO_OPT_RESET, /* Reset option pack (???) */
- IPAQ_EGPIO_IR_ON, /* IR sensor/emitter power */
- IPAQ_EGPIO_IR_FSEL, /* IR speed selection 1->fast, 0->slow */
- IPAQ_EGPIO_RS232_ON, /* Maxim RS232 chip power */
- IPAQ_EGPIO_VPP_ON, /* Turn on power to flash programming */
- IPAQ_EGPIO_LCD_ENABLE, /* Enable/disable LCD controller */
-};
-
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-
-#endif /* ASSEMBLY */
-
-#endif /* _INCLUDE_H3600_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
deleted file mode 100644
index a36ca76..0000000
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-?? Andrew Christian Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_GPIO_H_
-#define _INCLUDE_H3600_GPIO_H_
-
-/*
- * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
- * This file contains machine-specific definitions
- */
-
-#define GPIO_H3600_SUSPEND GPIO_GPIO (0)
-/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
-#define GPIO_H3100_BT_ON GPIO_GPIO (2)
-#define GPIO_H3100_GPIO3 GPIO_GPIO (3)
-#define GPIO_H3100_QMUTE GPIO_GPIO (4)
-#define GPIO_H3100_LCD_3V_ON GPIO_GPIO (5)
-#define GPIO_H3100_AUD_ON GPIO_GPIO (6)
-#define GPIO_H3100_AUD_PWR_ON GPIO_GPIO (7)
-#define GPIO_H3100_IR_ON GPIO_GPIO (8)
-#define GPIO_H3100_IR_FSEL GPIO_GPIO (9)
-
-/* for H3600, audio sample rate clock generator */
-#define GPIO_H3600_CLK_SET0 GPIO_GPIO (12)
-#define GPIO_H3600_CLK_SET1 GPIO_GPIO (13)
-
-#define GPIO_H3600_ACTION_BUTTON GPIO_GPIO (18)
-#define GPIO_H3600_SOFT_RESET GPIO_GPIO (20) /* Also known as BATT_FAULT */
-#define GPIO_H3600_OPT_LOCK GPIO_GPIO (22)
-#define GPIO_H3600_OPT_DET GPIO_GPIO (27)
-
-/****************************************************/
-
-#define IRQ_GPIO_H3600_ACTION_BUTTON IRQ_GPIO18
-#define IRQ_GPIO_H3600_OPT_DET IRQ_GPIO27
-
-/* H3100 / 3600 EGPIO pins */
-#define EGPIO_H3600_VPP_ON (1 << 0)
-#define EGPIO_H3600_CARD_RESET (1 << 1) /* reset the attached pcmcia/compactflash card. active high. */
-#define EGPIO_H3600_OPT_RESET (1 << 2) /* reset the attached option pack. active high. */
-#define EGPIO_H3600_CODEC_NRESET (1 << 3) /* reset the onboard UDA1341. active low. */
-#define EGPIO_H3600_OPT_NVRAM_ON (1 << 4) /* apply power to optionpack nvram, active high. */
-#define EGPIO_H3600_OPT_ON (1 << 5) /* full power to option pack. active high. */
-#define EGPIO_H3600_LCD_ON (1 << 6) /* enable 3.3V to LCD. active high. */
-#define EGPIO_H3600_RS232_ON (1 << 7) /* UART3 transceiver force on. Active high. */
-
-/* H3600 only EGPIO pins */
-#define EGPIO_H3600_LCD_PCI (1 << 8) /* LCD control IC enable. active high. */
-#define EGPIO_H3600_IR_ON (1 << 9) /* apply power to IR module. active high. */
-#define EGPIO_H3600_AUD_AMP_ON (1 << 10) /* apply power to audio power amp. active high. */
-#define EGPIO_H3600_AUD_PWR_ON (1 << 11) /* apply power to reset of audio circuit. active high. */
-#define EGPIO_H3600_QMUTE (1 << 12) /* mute control for onboard UDA1341. active high. */
-#define EGPIO_H3600_IR_FSEL (1 << 13) /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_H3600_LCD_5V_ON (1 << 14) /* enable 5V to LCD. active high. */
-#define EGPIO_H3600_LVDD_ON (1 << 15) /* enable 9V and -6.5V to LCD. */
-
-
-#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
new file mode 100644
index 0000000..7d9df16
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -0,0 +1,94 @@
+/*
+ * Definitions for Compaq iPAQ H3100 and H3600 handheld computers
+ *
+ * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_H3XXX_H_
+#define _INCLUDE_H3XXX_H_
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT 0xf0000000
+#define H3600_BANK_2_VIRT 0xf1000000
+#define H3600_BANK_4_VIRT 0xf3800000
+
+/*
+ * gpiolib numbers for all iPAQs
+ */
+#define H3XXX_GPIO_PWR_BUTTON 0
+#define H3XXX_GPIO_PCMCIA_CD1 10
+#define H3XXX_GPIO_PCMCIA_IRQ1 11
+#define H3XXX_GPIO_PCMCIA_CD0 17
+#define H3XXX_GPIO_ACTION_BUTTON 18
+#define H3XXX_GPIO_SYS_CLK 19
+#define H3XXX_GPIO_PCMCIA_IRQ0 21
+#define H3XXX_GPIO_COM_DCD 23
+#define H3XXX_GPIO_OPTION 24
+#define H3XXX_GPIO_COM_CTS 25
+#define H3XXX_GPIO_COM_RTS 26
+
+/* machine-specific gpios */
+
+#define H3100_GPIO_BT_ON 2
+#define H3100_GPIO_QMUTE 4
+#define H3100_GPIO_LCD_3V_ON 5
+#define H3100_GPIO_AUD_ON 6
+#define H3100_GPIO_AUD_PWR_ON 7
+#define H3100_GPIO_IR_ON 8
+#define H3100_GPIO_IR_FSEL 9
+
+#define H3600_GPIO_CLK_SET0 12 /* audio sample rate clock generator */
+#define H3600_GPIO_CLK_SET1 13
+#define H3600_GPIO_SOFT_RESET 20 /* also known as BATT_FAULT */
+#define H3600_GPIO_OPT_LOCK 22
+#define H3600_GPIO_OPT_DET 27
+
+
+/* H3100 / 3600 EGPIO pins */
+#define H3XXX_EGPIO_BASE (GPIO_MAX + 1)
+
+#define H3XXX_EGPIO_VPP_ON (H3XXX_EGPIO_BASE + 0)
+#define H3XXX_EGPIO_CARD_RESET (H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card. active high. */
+#define H3XXX_EGPIO_OPT_RESET (H3XXX_EGPIO_BASE + 2) /* reset the attached option pack. active high. */
+#define H3XXX_EGPIO_CODEC_NRESET (H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341. active low. */
+#define H3XXX_EGPIO_OPT_NVRAM_ON (H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
+#define H3XXX_EGPIO_OPT_ON (H3XXX_EGPIO_BASE + 5) /* full power to option pack. active high. */
+#define H3XXX_EGPIO_LCD_ON (H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD. active high. */
+#define H3XXX_EGPIO_RS232_ON (H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on. Active high. */
+
+/* H3600 only EGPIO pins */
+#define H3600_EGPIO_LCD_PCI (H3XXX_EGPIO_BASE + 8) /* LCD control IC enable. active high. */
+#define H3600_EGPIO_IR_ON (H3XXX_EGPIO_BASE + 9) /* apply power to IR module. active high. */
+#define H3600_EGPIO_AUD_AMP_ON (H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp. active high. */
+#define H3600_EGPIO_AUD_PWR_ON (H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit. active high. */
+#define H3600_EGPIO_QMUTE (H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341. active high. */
+#define H3600_EGPIO_IR_FSEL (H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */
+#define H3600_EGPIO_LCD_5V_ON (H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
+#define H3600_EGPIO_LVDD_ON (H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
+
+struct gpio_default_state {
+ int gpio;
+ int mode;
+ const char *name;
+};
+
+#define GPIO_MODE_IN -1
+#define GPIO_MODE_OUT0 0
+#define GPIO_MODE_OUT1 1
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n);
+void __init h3xxx_map_io(void);
+void __init h3xxx_mach_init(void);
+
+#endif /* _INCLUDE_H3XXX_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index fb8b09a..ed1a331 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -16,6 +16,7 @@
u32 mccr0;
u32 mccr1;
unsigned int sclk_rate;
+ int gpio_base;
};
#endif
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index fd776bb..13ebd2d 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -354,7 +354,7 @@
static void __init jornada720_mach_init(void)
{
- sa11x0_set_flash_data(&jornada720_flash_data, &jornada720_flash_resource, 1);
+ sa11x0_register_mtd(&jornada720_flash_data, &jornada720_flash_resource, 1);
}
MACHINE_START(JORNADA720, "HP Jornada 720")
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 1f940df..68069d6 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -28,7 +28,7 @@
static void __init lart_init(void)
{
- sa11x0_set_mcp_data(&lart_mcp_data);
+ sa11x0_register_mcp(&lart_mcp_data);
}
static struct map_desc lart_io_desc[] __initdata = {
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index e1458bc..1ccd601 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -109,7 +109,7 @@
static void __init pleb_init(void)
{
- sa11x0_set_flash_data(&pleb_flash_data, pleb_flash_resources,
+ sa11x0_register_mtd(&pleb_flash_data, pleb_flash_resources,
ARRAY_SIZE(pleb_flash_resources));
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index ddd917d..85e82bb 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -59,8 +59,8 @@
static void __init shannon_init(void)
{
- sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1);
- sa11x0_set_mcp_data(&shannon_mcp_data);
+ sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
+ sa11x0_register_mcp(&shannon_mcp_data);
}
static void __init shannon_map_io(void)
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 3c74534..49cfd64 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -166,9 +166,9 @@
PCFR = 0;
PSDR = 0;
- sa11x0_set_flash_data(&simpad_flash_data, simpad_flash_resources,
+ sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
ARRAY_SIZE(simpad_flash_resources));
- sa11x0_set_mcp_data(&simpad_mcp_data);
+ sa11x0_register_mcp(&simpad_mcp_data);
}
static void simpad_power_off(void)
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 885b5c0..fab46fe 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -12,3 +12,4 @@
obj-$(CONFIG_SPI_PL022) += spi.o
obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
obj-$(CONFIG_I2C_STU300) += i2c.o
+obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index 10be1f8..c73ed06 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,13 +9,257 @@
*/
#include <linux/kernel.h>
#include <linux/i2c.h>
+#include <linux/mfd/ab3100.h>
+#include <linux/regulator/machine.h>
+#include <linux/amba/bus.h>
#include <mach/irqs.h>
+/*
+ * Initial settings of ab3100 registers.
+ * Common for below LDO regulator settings are that
+ * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
+ * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
+ */
+
+/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
+#define LDO_A_SETTING 0x16
+/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_C_SETTING 0x10
+/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
+#define LDO_D_SETTING 0x10
+/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_E_SETTING 0x10
+/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
+#define LDO_E_SLEEP_SETTING 0x00
+/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_F_SETTING 0xD0
+/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_G_SETTING 0x00
+/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
+#define LDO_H_SETTING 0x18
+/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_K_SETTING 0x00
+/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
+#define LDO_EXT_SETTING 0x00
+/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
+#define BUCK_SETTING 0x7D
+/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
+#define BUCK_SLEEP_SETTING 0xAC
+
+static struct regulator_consumer_supply supply_ldo_c[] = {
+ {
+ .dev_name = "ab3100-codec",
+ .supply = "vaudio", /* Powers the codec */
+ },
+};
+
+/*
+ * This one needs to be a supply so we can turn it off
+ * in order to shut down the system.
+ */
+static struct regulator_consumer_supply supply_ldo_d[] = {
+ {
+ .dev = NULL,
+ .supply = "vana15", /* Powers the SoC (CPU etc) */
+ },
+};
+
+static struct regulator_consumer_supply supply_ldo_g[] = {
+ {
+ .dev_name = "mmci",
+ .supply = "vmmc", /* Powers MMC/SD card */
+ },
+};
+
+static struct regulator_consumer_supply supply_ldo_h[] = {
+ {
+ .dev_name = "xgam_pdi",
+ .supply = "vdisp", /* Powers camera, display etc */
+ },
+};
+
+static struct regulator_consumer_supply supply_ldo_k[] = {
+ {
+ .dev_name = "irda",
+ .supply = "vir", /* Power IrDA */
+ },
+};
+
+/*
+ * This is a placeholder for whoever wish to use the
+ * external power.
+ */
+static struct regulator_consumer_supply supply_ldo_ext[] = {
+ {
+ .dev = NULL,
+ .supply = "vext", /* External power */
+ },
+};
+
+/* Preset (hardware defined) voltages for these regulators */
+#define LDO_A_VOLTAGE 2750000
+#define LDO_C_VOLTAGE 2650000
+#define LDO_D_VOLTAGE 2650000
+
+static struct ab3100_platform_data ab3100_plf_data = {
+ .reg_constraints = {
+ /* LDO A routing and constraints */
+ {
+ .constraints = {
+ .name = "vrad",
+ .min_uV = LDO_A_VOLTAGE,
+ .max_uV = LDO_A_VOLTAGE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ /* LDO C routing and constraints */
+ {
+ .constraints = {
+ .min_uV = LDO_C_VOLTAGE,
+ .max_uV = LDO_C_VOLTAGE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_c),
+ .consumer_supplies = supply_ldo_c,
+ },
+ /* LDO D routing and constraints */
+ {
+ .constraints = {
+ .min_uV = LDO_D_VOLTAGE,
+ .max_uV = LDO_D_VOLTAGE,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ /*
+ * Actually this is boot_on but we need
+ * to reference count it externally to
+ * be able to shut down the system.
+ */
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_d),
+ .consumer_supplies = supply_ldo_d,
+ },
+ /* LDO E routing and constraints */
+ {
+ .constraints = {
+ .name = "vio",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ /* LDO F routing and constraints */
+ {
+ .constraints = {
+ .name = "vana25",
+ .min_uV = 2500000,
+ .max_uV = 2500000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ /* LDO G routing and constraints */
+ {
+ .constraints = {
+ .min_uV = 1500000,
+ .max_uV = 2850000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_g),
+ .consumer_supplies = supply_ldo_g,
+ },
+ /* LDO H routing and constraints */
+ {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 2750000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_h),
+ .consumer_supplies = supply_ldo_h,
+ },
+ /* LDO K routing and constraints */
+ {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 2750000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_k),
+ .consumer_supplies = supply_ldo_k,
+ },
+ /* External regulator interface. No fixed voltage specified.
+ * If we knew the voltage of the external regulator and it
+ * was connected on the board, we could add the (fixed)
+ * voltage for it here.
+ */
+ {
+ .constraints = {
+ .min_uV = 0,
+ .max_uV = 0,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext),
+ .consumer_supplies = supply_ldo_ext,
+ },
+ /* Buck converter routing and constraints */
+ {
+ .constraints = {
+ .name = "vcore",
+ .min_uV = 1200000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .always_on = 1,
+ .boot_on = 1,
+ },
+ },
+ },
+ .reg_initvals = {
+ LDO_A_SETTING,
+ LDO_C_SETTING,
+ LDO_E_SETTING,
+ LDO_E_SLEEP_SETTING,
+ LDO_F_SETTING,
+ LDO_G_SETTING,
+ LDO_H_SETTING,
+ LDO_K_SETTING,
+ LDO_EXT_SETTING,
+ BUCK_SETTING,
+ BUCK_SLEEP_SETTING,
+ LDO_D_SETTING,
+ },
+};
+
static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
{
.type = "ab3100",
.addr = 0x48,
.irq = IRQ_U300_IRQ0_EXT,
+ .platform_data = &ab3100_plf_data,
},
};
@@ -38,6 +282,11 @@
{
i2c_register_board_info(0, bus0_i2c_board_info,
ARRAY_SIZE(bus0_i2c_board_info));
+ /*
+ * This makes the core shut down all unused regulators
+ * after all the initcalls have completed.
+ */
+ regulator_has_full_constraints();
i2c_register_board_info(1, bus1_i2c_board_info,
ARRAY_SIZE(bus1_i2c_board_info));
}
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 7b6b016..109f5a6 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -40,64 +40,6 @@
return mmci_card->mmc_inserted;
}
-/*
- * Here follows a large chunk of code which will only be enabled if you
- * have both the AB3100 chip mounted and the MMC subsystem activated.
- */
-
-static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
-{
- int v;
-
- /*
- * MMC Spec:
- * bit 7: 1.70 - 1.95V
- * bit 8 - 14: 2.0 - 2.6V
- * bit 15 - 23: 2.7 - 3.6V
- *
- * ab3100 voltages:
- * 000 - 2.85V
- * 001 - 2.75V
- * 010 - 1.8V
- * 011 - 1.5V
- */
- switch (voltage) {
- case 8:
- v = 3;
- break;
- case 9:
- case 10:
- case 11:
- case 12:
- case 13:
- case 14:
- case 15:
- v = 1;
- break;
- case 16:
- v = 1;
- break;
- case 17:
- case 18:
- case 19:
- case 20:
- case 21:
- case 22:
- case 23:
- case 24:
- v = 0;
- break;
- default:
- v = 0;
- break;
- }
-
- /* PL180 voltage register bits */
- return v << 2;
-}
-
-
-
static int mmci_callback(void *data)
{
struct mmci_card_event *mmci_card = data;
@@ -154,9 +96,11 @@
if (!mmci_card)
return -ENOMEM;
+ /*
+ * Do not set ocr_mask or voltage translation function,
+ * we have a regulator we can control instead.
+ */
/* Nominally 2.85V on our platform */
- mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
- mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
mmci_card->mmc0_plat_data.status = mmc_status;
mmci_card->mmc0_plat_data.gpio_wp = -1;
mmci_card->mmc0_plat_data.gpio_cd = -1;
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
new file mode 100644
index 0000000..9c53f01
--- /dev/null
+++ b/arch/arm/mach-u300/regulator.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-u300/regulator.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Handle board-bound regulators and board power not related
+ * to any devices.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+/* Those are just for writing in syscon */
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+/*
+ * Regulators that power the board and chip and which are
+ * not copuled to specific drivers are hogged in these
+ * instances.
+ */
+static struct regulator *main_power_15;
+
+/*
+ * This function is used from pm.h to shut down the system by
+ * resetting all regulators in turn and then disable regulator
+ * LDO D (main power).
+ */
+void u300_pm_poweroff(void)
+{
+ sigset_t old, all;
+
+ sigfillset(&all);
+ if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+ /* Disable LDO D to shut down the system */
+ if (main_power_15)
+ regulator_disable(main_power_15);
+ else
+ pr_err("regulator not available to shut down system\n");
+ (void) sigprocmask(SIG_SETMASK, &old, NULL);
+ }
+ return;
+}
+
+/*
+ * Hog the regulators needed to power up the board.
+ */
+static int __init u300_init_boardpower(void)
+{
+ int err;
+ u32 val;
+
+ pr_info("U300: setting up board power\n");
+ main_power_15 = regulator_get(NULL, "vana15");
+ if (IS_ERR(main_power_15)) {
+ pr_err("could not get vana15");
+ return PTR_ERR(main_power_15);
+ }
+ err = regulator_enable(main_power_15);
+ if (err) {
+ pr_err("could not enable vana15\n");
+ return err;
+ }
+
+ /*
+ * On U300 a special system controller register pulls up the DC
+ * until the vana15 (LDO D) regulator comes up. At this point, all
+ * regulators are set and we do not need power control via
+ * DC ON anymore. This function will likely be moved whenever
+ * the rest of the U300 power management is implemented.
+ */
+ pr_info("U300: disable system controller pull-up\n");
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+ val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+ /* Register globally exported PM poweroff hook */
+ pm_power_off = u300_pm_poweroff;
+
+ return 0;
+}
+
+/*
+ * So at module init time we hog the regulator!
+ */
+module_init(u300_init_boardpower);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
new file mode 100644
index 0000000..03625d7
--- /dev/null
+++ b/arch/arm/mach-ux500/Kconfig
@@ -0,0 +1,15 @@
+menu "ST-Ericsson platform type"
+ depends on ARCH_U8500
+
+comment "ST-Ericsson Multicore Mobile Platforms"
+
+config MACH_U8500_MOP
+ bool "U8500 Early Development platform"
+ default y
+ select ARM_GIC
+ select HAS_MTU
+ help
+ Include support for mop500 development platform
+ based on U8500 architecture. The platform is based
+ on early drop silicon version of 8500.
+endmenu
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
new file mode 100644
index 0000000..95e6e24
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel, U8500 machine.
+#
+
+obj-y := clock.o
+obj-$(CONFIG_ARCH_U8500) += cpu-u8500.o
+obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
new file mode 100644
index 0000000..c7e75ac
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
+
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
new file mode 100644
index 0000000..aa5afbc
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/spi/spi.h>
+
+#include <asm/localtimer.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/mtu.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#define __MEM_4K_RESOURCE(x) \
+ .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+/* These are active devices on this board */
+static struct amba_device uart0_device = {
+ .dev = { .init_name = "uart0" },
+ __MEM_4K_RESOURCE(U8500_UART0_BASE),
+ .irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+ .dev = { .init_name = "uart1" },
+ __MEM_4K_RESOURCE(U8500_UART1_BASE),
+ .irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device uart2_device = {
+ .dev = { .init_name = "uart2" },
+ __MEM_4K_RESOURCE(U8500_UART2_BASE),
+ .irq = {IRQ_UART2, NO_IRQ},
+};
+
+static void ab4500_spi_cs_control(u32 command)
+{
+ /* set the FRM signal, which is CS - TODO */
+}
+
+struct pl022_config_chip ab4500_chip_info = {
+ .lbm = LOOPBACK_DISABLED,
+ .com_mode = INTERRUPT_TRANSFER,
+ .iface = SSP_INTERFACE_MOTOROLA_SPI,
+ /* we can act as master only */
+ .hierarchy = SSP_MASTER,
+ .slave_tx_disable = 0,
+ .endian_rx = SSP_RX_MSB,
+ .endian_tx = SSP_TX_MSB,
+ .data_size = SSP_DATA_BITS_24,
+ .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+ .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+ .clk_phase = SSP_CLK_SECOND_EDGE,
+ .clk_pol = SSP_CLK_POL_IDLE_HIGH,
+ .cs_control = ab4500_spi_cs_control,
+};
+
+static struct spi_board_info u8500_spi_devices[] = {
+ {
+ .modalias = "ab4500",
+ .controller_data = &ab4500_chip_info,
+ .max_speed_hz = 12000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ .irq = IRQ_AB4500,
+ },
+};
+
+static struct pl022_ssp_controller ssp0_platform_data = {
+ .bus_id = 0,
+ /* pl022 not yet supports dma */
+ .enable_dma = 0,
+ /* on this platform, gpio 31,142,144,214 &
+ * 224 are connected as chip selects
+ */
+ .num_chipselect = 5,
+};
+
+static struct amba_device pl022_device = {
+ .dev = {
+ .coherent_dma_mask = ~0,
+ .init_name = "pl022",
+ .platform_data = &ssp0_platform_data,
+ },
+ .res = {
+ .start = U8500_SSP0_BASE,
+ .end = U8500_SSP0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_SSP0, NO_IRQ },
+ /* ST-Ericsson modified id */
+ .periphid = SSP_PER_ID,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &uart0_device,
+ &uart1_device,
+ &uart2_device,
+ &pl022_device,
+};
+
+static void __init u8500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+ /* Setup the local timer base */
+ twd_base = __io_address(U8500_TWD_BASE);
+#endif
+ /* Setup the MTU base */
+ mtu_base = __io_address(U8500_MTU0_BASE);
+
+ nmdk_timer_init();
+}
+
+static struct sys_timer u8500_timer = {
+ .init = u8500_timer_init,
+};
+
+static void __init u8500_init_machine(void)
+{
+ int i;
+
+ /* Register the active AMBA devices on this board */
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+ amba_device_register(amba_devs[i], &iomem_resource);
+
+ spi_register_board_info(u8500_spi_devices,
+ ARRAY_SIZE(u8500_spi_devices));
+
+ u8500_init_devices();
+}
+
+MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
+ /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
+ .phys_io = U8500_UART2_BASE,
+ .io_pg_offst = (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = u8500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &u8500_timer,
+ .init_machine = u8500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
new file mode 100644
index 0000000..20b6ebb
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ * heavily based on realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <asm/clkdev.h>
+
+/* currently the clk structure
+ * just supports rate. This would
+ * be extended as and when new devices are
+ * added - TODO
+ */
+struct clk {
+ unsigned long rate;
+};
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ /*TODO*/
+ return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/* ssp clock */
+static struct clk ssp_clk = {
+ .rate = 48000000,
+};
+
+/* fixed clock */
+static struct clk f38_clk = {
+ .rate = 38400000,
+};
+
+static struct clk_lookup lookups[] = {
+ {
+ /* UART0 */
+ .dev_id = "uart0",
+ .clk = &f38_clk,
+ }, { /* UART1 */
+ .dev_id = "uart1",
+ .clk = &f38_clk,
+ }, { /* UART2 */
+ .dev_id = "uart2",
+ .clk = &f38_clk,
+ }, { /* SSP */
+ .dev_id = "pl022",
+ .clk = &ssp_clk,
+ }
+};
+
+static int __init clk_init(void)
+{
+ int i;
+
+ /* register the clock lookups */
+ for (i = 0; i < ARRAY_SIZE(lookups); i++)
+ clkdev_add(&lookups[i]);
+ return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
new file mode 100644
index 0000000..5f05e58
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+ /* yet to be added, add i2c0, gpio.. */
+};
+
+#define __IO_DEV_DESC(x, sz) { \
+ .virtual = IO_ADDRESS(x), \
+ .pfn = __phys_to_pfn(x), \
+ .length = sz, \
+ .type = MT_DEVICE, \
+}
+
+/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+};
+
+void __init u8500_map_io(void)
+{
+ iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+}
+
+void __init u8500_init_irq(void)
+{
+ gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+}
+
+/*
+ * This function is called from the board init
+ */
+void __init u8500_init_devices(void)
+{
+ /* Register the platform devices */
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+ return ;
+}
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
new file mode 100644
index 0000000..a6be2cd
--- /dev/null
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2009 ST-Ericsson
+ * This file is based ARM Realview platform
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __INIT
+
+/*
+ * U8500 specific entry point for secondary CPUs.
+ */
+ENTRY(u8500_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+ dsb
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+1: .long .
+ .long pen_release
diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
new file mode 100644
index 0000000..8f21b6a
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @MMU enabled?
+ moveq \rx, #0x80000000 @MMU off, Physical address
+ movne \rx, #0xF0000000 @MMU on, Virtual address
+ orr \rx, \rx, #0x7000
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
new file mode 100644
index 0000000..eece330
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * Low-level IRQ helper macros for U8500 platforms
+ *
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is a copy of ARM Realview platform.
+ * -just satisfied checkpatch script.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an
+ * interrupt if it's between 30 and 1020. The test_for_ipi
+ * routine below will pick up on IPIs.
+ *
+ * A simple read from the controller will tell us the number
+ * of the highest priority enabled interrupt. We then just
+ * need to check whether it is in the valid range for an
+ * IRQ (30-1020 inclusive).
+ */
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ /* bits 12-10 = src CPU, 9-0 = int # */
+ ldr \irqstat, [\base, #GIC_CPU_INTACK]
+
+ ldr \tmp, =1021
+
+ bic \irqnr, \irqstat, #0x1c00
+
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+
+ .endm
+
+ /* We assume that irqstat (the raw value of the IRQ
+ * acknowledge register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of
+ * interrupt on the controller, since this requires the
+ * original irqstat value which we won't easily be able
+ * to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* As above, this assumes that irqstat and base
+ * are preserved..
+ */
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ mov \tmp, #0
+ cmp \irqnr, #29
+ moveq \tmp, #1
+ streq \irqstat, [\base, #GIC_CPU_EOI]
+ cmp \tmp, #0
+ .endm
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
new file mode 100644
index 0000000..6da6502
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * U8500 hardware definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL 0xf0000000
+#define U8500_IO_PHYSICAL 0xa0000000
+
+/* this macro is used in assembly, so no cast */
+#define IO_ADDRESS(x) \
+ (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+
+/* typesafe io address */
+#define __io_address(n) __io(IO_ADDRESS(n))
+
+/*
+ * Base address definitions for U8500 Onchip IPs. All the
+ * peripherals are contained in a single 1 Mbyte region, with
+ * AHB peripherals at the bottom and APB peripherals at the
+ * top of the region. PER stands for PERIPHERAL region which
+ * itself divided into sub regions.
+ */
+#define U8500_PER3_BASE 0x80000000
+#define U8500_PER2_BASE 0x80110000
+#define U8500_PER1_BASE 0x80120000
+#define U8500_PER4_BASE 0x80150000
+
+#define U8500_PER6_BASE 0xa03c0000
+#define U8500_PER5_BASE 0xa03e0000
+#define U8500_PER7_BASE 0xa03d0000
+
+#define U8500_SVA_BASE 0xa0100000
+#define U8500_SIA_BASE 0xa0200000
+
+#define U8500_SGA_BASE 0xa0300000
+#define U8500_MCDE_BASE 0xa0350000
+#define U8500_DMA_BASE 0xa0362000
+
+#define U8500_SCU_BASE 0xa0410000
+#define U8500_GIC_CPU_BASE 0xa0410100
+#define U8500_TWD_BASE 0xa0410600
+#define U8500_GIC_DIST_BASE 0xa0411000
+#define U8500_L2CC_BASE 0xa0412000
+
+#define U8500_TWD_SIZE 0x100
+
+/* per7 base addressess */
+#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000)
+#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000)
+#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000)
+#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
+#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE (U8500_PER7_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
+#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000)
+#define U8500_CLKRST5_BASE (U8500_PER7_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000)
+#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000)
+#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000)
+#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000)
+#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000)
+#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000)
+#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000)
+#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000)
+
+/* per3 base addressess */
+#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
+#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000)
+#define U8500_CLKRST3_BASE (U8500_PER7_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000)
+#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000)
+#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
+#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
+#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000)
+#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000)
+#define U8500_CLKRST1_BASE (U8500_PER2_BASE + 0xf000)
+
+/* ST-Ericsson modified pl022 id */
+#define SSP_PER_ID 0x01080022
+
+#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h
new file mode 100644
index 0000000..1cf3f44
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-u8500/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
new file mode 100644
index 0000000..394b5dd
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef ASM_ARCH_IRQS_H
+#define ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_LOCALTIMER 29
+#define IRQ_LOCALWDOG 30
+
+/* Shared Peripheral Interrupt (SHPI) */
+#define IRQ_SHPI_START 32
+
+/* Interrupt numbers generic for shared peripheral */
+#define IRQ_MTU0 (IRQ_SHPI_START + 4)
+#define IRQ_SPI2 (IRQ_SHPI_START + 6)
+#define IRQ_SPI0 (IRQ_SHPI_START + 8)
+#define IRQ_UART0 (IRQ_SHPI_START + 11)
+#define IRQ_I2C3 (IRQ_SHPI_START + 12)
+#define IRQ_SSP0 (IRQ_SHPI_START + 14)
+#define IRQ_MTU1 (IRQ_SHPI_START + 17)
+#define IRQ_RTC_RTT (IRQ_SHPI_START + 18)
+#define IRQ_UART1 (IRQ_SHPI_START + 19)
+#define IRQ_I2C0 (IRQ_SHPI_START + 21)
+#define IRQ_I2C1 (IRQ_SHPI_START + 22)
+#define IRQ_USBOTG (IRQ_SHPI_START + 23)
+#define IRQ_DMA (IRQ_SHPI_START + 25)
+#define IRQ_UART2 (IRQ_SHPI_START + 26)
+#define IRQ_HSIR_EXCEP (IRQ_SHPI_START + 29)
+#define IRQ_MSP0 (IRQ_SHPI_START + 31)
+#define IRQ_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32)
+#define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33)
+#define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34)
+#define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35)
+#define IRQ_AB4500 (IRQ_SHPI_START + 40)
+#define IRQ_DISP (IRQ_SHPI_START + 48)
+#define IRQ_SiPI3 (IRQ_SHPI_START + 49)
+#define IRQ_SSP1 (IRQ_SHPI_START + 52)
+#define IRQ_I2C2 (IRQ_SHPI_START + 55)
+#define IRQ_SDMMC0 (IRQ_SHPI_START + 60)
+#define IRQ_MSP1 (IRQ_SHPI_START + 62)
+#define IRQ_SPI1 (IRQ_SHPI_START + 96)
+#define IRQ_MSP2 (IRQ_SHPI_START + 98)
+#define IRQ_SDMMC4 (IRQ_SHPI_START + 99)
+#define IRQ_HSIRD0 (IRQ_SHPI_START + 104)
+#define IRQ_HSIRD1 (IRQ_SHPI_START + 105)
+#define IRQ_HSITD0 (IRQ_SHPI_START + 106)
+#define IRQ_HSITD1 (IRQ_SHPI_START + 107)
+#define IRQ_GPIO0 (IRQ_SHPI_START + 119)
+#define IRQ_GPIO1 (IRQ_SHPI_START + 120)
+#define IRQ_GPIO2 (IRQ_SHPI_START + 121)
+#define IRQ_GPIO3 (IRQ_SHPI_START + 122)
+#define IRQ_GPIO4 (IRQ_SHPI_START + 123)
+#define IRQ_GPIO5 (IRQ_SHPI_START + 124)
+#define IRQ_GPIO6 (IRQ_SHPI_START + 125)
+#define IRQ_GPIO7 (IRQ_SHPI_START + 126)
+#define IRQ_GPIO8 (IRQ_SHPI_START + 127)
+
+/* There are 128 shared peripheral interrupts assigned to
+ * INTID[160:32]. The first 32 interrupts are reserved.
+ */
+#define NR_IRQS 161
+
+#endif /*ASM_ARCH_IRQS_H*/
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
new file mode 100644
index 0000000..510571a
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/memory.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+#define BUS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
new file mode 100644
index 0000000..cf0ce16
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+extern void u8500_map_io(void);
+extern void u8500_init_devices(void);
+extern void u8500_init_irq(void);
+/* We re-use nomadik_timer for this platform */
+extern void nmdk_timer_init(void);
+
+#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
new file mode 100644
index 0000000..b59f7bc
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -0,0 +1,32 @@
+/*
+ * This file is based ARM realview platform.
+ * Copyright (C) ARM Limited.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/* This is required to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+
+#define hard_smp_processor_id() \
+ ({ \
+ unsigned int cpunum; \
+ __asm__("mrc p15, 0, %0, c0, c0, 5" \
+ : "=r" (cpunum)); \
+ cpunum &= 0x0F; \
+ })
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+ gic_raise_softirq(mask, 1);
+}
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
new file mode 100644
index 0000000..c0cd800
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ /* yet to be implemented - TODO */
+}
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h
new file mode 100644
index 0000000..d0942c1
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 110000000
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
new file mode 100644
index 0000000..8552eb1
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+#define U8500_UART_DR 0x80007000
+#define U8500_UART_LCRH 0x8000702c
+#define U8500_UART_CR 0x80007030
+#define U8500_UART_FR 0x80007018
+
+static void putc(const char c)
+{
+ /* Do nothing if the UART is not enabled. */
+ if (!(readb(U8500_UART_CR) & 0x1))
+ return;
+
+ if (c == '\n')
+ putc('\r');
+
+ while (readb(U8500_UART_FR) & (1 << 5))
+ barrier();
+ writeb(c, U8500_UART_DR);
+}
+
+static void flush(void)
+{
+ if (!(readb(U8500_UART_CR) & 0x1))
+ return;
+ while (readb(U8500_UART_FR) & (1 << 3))
+ barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
new file mode 100644
index 0000000..86cdbbc
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/vmalloc.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END 0xf0000000
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
new file mode 100644
index 0000000..2288f6a
--- /dev/null
+++ b/arch/arm/mach-ux500/localtimer.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is heavily based on relaview platform, almost a copy.
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ evt->irq = IRQ_LOCALTIMER;
+ twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
new file mode 100644
index 0000000..8dfe7ca
--- /dev/null
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+static unsigned int __init get_core_count(void)
+{
+ return scu_get_core_count(__io_address(U8500_SCU_BASE));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ trace_hardirqs_off();
+
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ pen_release = -1;
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ */
+ pen_release = cpu;
+ flush_cache_all();
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ if (pen_release == -1)
+ break;
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+ /* nobody is to be released from the pen yet */
+ pen_release = -1;
+
+ /*
+ * write the address of secondary startup into the backup ram register
+ * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+ * backup ram register at offset 0x1FF0, which is what boot rom code
+ * is waiting for. This would wake up the secondary core from WFE
+ */
+#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
+ __raw_writel(virt_to_phys(u8500_secondary_startup),
+ (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+ U8500_CPU1_JUMPADDR_OFFSET);
+
+#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+ __raw_writel(0xA1FEED01,
+ (void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+ U8500_CPU1_WAKEMAGIC_OFFSET);
+
+ /* make sure write buffer is drained */
+ mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned int ncores = get_core_count();
+ unsigned int cpu = smp_processor_id();
+ int i;
+
+ /* sanity check */
+ if (ncores == 0) {
+ printk(KERN_ERR
+ "U8500: strange CM count of 0? Default to 1\n");
+ ncores = 1;
+ }
+
+ if (ncores > num_possible_cpus()) {
+ printk(KERN_WARNING
+ "U8500: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, num_possible_cpus());
+ ncores = num_possible_cpus();
+ }
+
+ smp_store_cpu_info(cpu);
+
+ /*
+ * are we trying to boot more cores than exist?
+ */
+ if (max_cpus > ncores)
+ max_cpus = ncores;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time.
+ */
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+
+ if (max_cpus > 1) {
+ /*
+ * Enable the local timer or broadcast device for the
+ * boot CPU, but only if we have more than one CPU.
+ */
+ percpu_timer_setup();
+ scu_enable(__io_address(U8500_SCU_BASE));
+ wakeup_secondary();
+ }
+}
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 2a6f98d..51f17b7 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -32,6 +32,7 @@
#include <asm/mach-types.h>
#include <mach/regs-serial.h>
+#include <mach/nuc900_spi.h>
#include <mach/map.h>
#include "cpu.h"
@@ -196,6 +197,18 @@
/* SPI device */
+static struct w90p910_spi_info nuc900_spiflash_data = {
+ .num_cs = 1,
+ .lsb = 0,
+ .txneg = 1,
+ .rxneg = 0,
+ .divider = 24,
+ .sleep = 0,
+ .txnum = 0,
+ .txbitlen = 1,
+ .bus_num = 0,
+};
+
static struct resource nuc900_spi_resource[] = {
[0] = {
.start = W90X900_PA_I2C + SPIOFFSET,
@@ -214,6 +227,9 @@
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_spi_resource),
.resource = nuc900_spi_resource,
+ .dev = {
+ .platform_data = &nuc900_spiflash_data,
+ }
};
/* spi device, spi flash info */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9264d81..dd4698c 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -388,7 +388,7 @@
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_V6
@@ -764,6 +764,15 @@
help
This option enables the L2x0 PrimeCell.
+config CACHE_TAUROS2
+ bool "Enable the Tauros2 L2 cache controller"
+ depends on ARCH_DOVE
+ default y
+ select OUTER_CACHE
+ help
+ This option enables the Tauros2 L2 cache controller (as
+ found on PJ1/PJ4).
+
config CACHE_XSC3L2
bool "Enable the L2 cache on XScale3"
depends on CPU_XSC3
@@ -774,5 +783,5 @@
config ARM_L1_CACHE_SHIFT
int
- default 6 if ARCH_OMAP3
+ default 6 if ARCH_OMAP3 || ARCH_S5PC1XX
default 5
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 055cb2a..827e238 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@
iomap.o
obj-$(CONFIG_MMU) += fault-armv.o flush.o ioremap.o mmap.o \
- pgd.o mmu.o
+ pgd.o mmu.o vmregion.o
ifneq ($(CONFIG_MMU),y)
obj-y += nommu.o
@@ -87,4 +87,4 @@
obj-$(CONFIG_CACHE_FEROCEON_L2) += cache-feroceon-l2.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
obj-$(CONFIG_CACHE_XSC3L2) += cache-xsc3l2.o
-
+obj-$(CONFIG_CACHE_TAUROS2) += cache-tauros2.o
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index b480f1d..747f9a9 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -99,18 +99,25 @@
l2x0_base = base;
- /* disable L2X0 */
- writel(0, l2x0_base + L2X0_CTRL);
+ /*
+ * Check if l2x0 controller is already enabled.
+ * If you are booting from non-secure mode
+ * accessing the below registers will fault.
+ */
+ if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
- aux = readl(l2x0_base + L2X0_AUX_CTRL);
- aux &= aux_mask;
- aux |= aux_val;
- writel(aux, l2x0_base + L2X0_AUX_CTRL);
+ /* l2x0 controller is disabled */
- l2x0_inv_all();
+ aux = readl(l2x0_base + L2X0_AUX_CTRL);
+ aux &= aux_mask;
+ aux |= aux_val;
+ writel(aux, l2x0_base + L2X0_AUX_CTRL);
- /* enable L2X0 */
- writel(1, l2x0_base + L2X0_CTRL);
+ l2x0_inv_all();
+
+ /* enable L2X0 */
+ writel(1, l2x0_base + L2X0_CTRL);
+ }
outer_cache.inv_range = l2x0_inv_range;
outer_cache.clean_range = l2x0_clean_range;
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
new file mode 100644
index 0000000..5086865
--- /dev/null
+++ b/arch/arm/mm/cache-tauros2.c
@@ -0,0 +1,263 @@
+/*
+ * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - PJ1 CPU Core Datasheet,
+ * Document ID MV-S104837-01, Rev 0.7, January 24 2008.
+ * - PJ4 CPU Core Datasheet,
+ * Document ID MV-S105190-00, Rev 0.7, March 14 2008.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-tauros2.h>
+
+
+/*
+ * When Tauros2 is used on a CPU that supports the v7 hierarchical
+ * cache operations, the cache handling code in proc-v7.S takes care
+ * of everything, including handling DMA coherency.
+ *
+ * So, we only need to register outer cache operations here if we're
+ * being used on a pre-v7 CPU, and we only need to build support for
+ * outer cache operations into the kernel image if the kernel has been
+ * configured to support a pre-v7 CPU.
+ */
+#if __LINUX_ARM_ARCH__ < 7
+/*
+ * Low-level cache maintenance operations.
+ */
+static inline void tauros2_clean_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
+}
+
+static inline void tauros2_clean_inv_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
+}
+
+static inline void tauros2_inv_pa(unsigned long addr)
+{
+ __asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive.
+ */
+#define CACHE_LINE_SIZE 32
+
+static void tauros2_inv_range(unsigned long start, unsigned long end)
+{
+ /*
+ * Clean and invalidate partial first cache line.
+ */
+ if (start & (CACHE_LINE_SIZE - 1)) {
+ tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+ start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+ }
+
+ /*
+ * Clean and invalidate partial last cache line.
+ */
+ if (end & (CACHE_LINE_SIZE - 1)) {
+ tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+ end &= ~(CACHE_LINE_SIZE - 1);
+ }
+
+ /*
+ * Invalidate all full cache lines between 'start' and 'end'.
+ */
+ while (start < end) {
+ tauros2_inv_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+
+static void tauros2_clean_range(unsigned long start, unsigned long end)
+{
+ start &= ~(CACHE_LINE_SIZE - 1);
+ while (start < end) {
+ tauros2_clean_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+
+static void tauros2_flush_range(unsigned long start, unsigned long end)
+{
+ start &= ~(CACHE_LINE_SIZE - 1);
+ while (start < end) {
+ tauros2_clean_inv_pa(start);
+ start += CACHE_LINE_SIZE;
+ }
+
+ dsb();
+}
+#endif
+
+static inline u32 __init read_extra_features(void)
+{
+ u32 u;
+
+ __asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+ return u;
+}
+
+static inline void __init write_extra_features(u32 u)
+{
+ __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+ u32 u;
+
+ /*
+ * Read the CPU Extra Features register and verify that the
+ * Disable L2 Prefetch bit is set.
+ */
+ u = read_extra_features();
+ if (!(u & 0x01000000)) {
+ printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
+ write_extra_features(u | 0x01000000);
+ }
+}
+
+static inline int __init cpuid_scheme(void)
+{
+ extern int processor_id;
+
+ return !!((processor_id & 0x000f0000) == 0x000f0000);
+}
+
+static inline u32 __init read_mmfr3(void)
+{
+ u32 mmfr3;
+
+ __asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
+
+ return mmfr3;
+}
+
+static inline u32 __init read_actlr(void)
+{
+ u32 actlr;
+
+ __asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+
+ return actlr;
+}
+
+static inline void __init write_actlr(u32 actlr)
+{
+ __asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
+}
+
+void __init tauros2_init(void)
+{
+ extern int processor_id;
+ char *mode;
+
+ disable_l2_prefetch();
+
+#ifdef CONFIG_CPU_32v5
+ if ((processor_id & 0xff0f0000) == 0x56050000) {
+ u32 feat;
+
+ /*
+ * v5 CPUs with Tauros2 have the L2 cache enable bit
+ * located in the CPU Extra Features register.
+ */
+ feat = read_extra_features();
+ if (!(feat & 0x00400000)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ write_extra_features(feat | 0x00400000);
+ }
+
+ mode = "ARMv5";
+ outer_cache.inv_range = tauros2_inv_range;
+ outer_cache.clean_range = tauros2_clean_range;
+ outer_cache.flush_range = tauros2_flush_range;
+ }
+#endif
+
+#ifdef CONFIG_CPU_32v6
+ /*
+ * Check whether this CPU lacks support for the v7 hierarchical
+ * cache ops. (PJ4 is in its v6 personality mode if the MMFR3
+ * register indicates no support for the v7 hierarchical cache
+ * ops.)
+ */
+ if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) {
+ /*
+ * When Tauros2 is used in an ARMv6 system, the L2
+ * enable bit is in the ARMv6 ARM-mandated position
+ * (bit [26] of the System Control Register).
+ */
+ if (!(get_cr() & 0x04000000)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ adjust_cr(0x04000000, 0x04000000);
+ }
+
+ mode = "ARMv6";
+ outer_cache.inv_range = tauros2_inv_range;
+ outer_cache.clean_range = tauros2_clean_range;
+ outer_cache.flush_range = tauros2_flush_range;
+ }
+#endif
+
+#ifdef CONFIG_CPU_32v7
+ /*
+ * Check whether this CPU has support for the v7 hierarchical
+ * cache ops. (PJ4 is in its v7 personality mode if the MMFR3
+ * register indicates support for the v7 hierarchical cache
+ * ops.)
+ *
+ * (Although strictly speaking there may exist CPUs that
+ * implement the v7 cache ops but are only ARMv6 CPUs (due to
+ * not complying with all of the other ARMv7 requirements),
+ * there are no real-life examples of Tauros2 being used on
+ * such CPUs as of yet.)
+ */
+ if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
+ u32 actlr;
+
+ /*
+ * When Tauros2 is used in an ARMv7 system, the L2
+ * enable bit is located in the Auxiliary System Control
+ * Register (which is the only register allowed by the
+ * ARMv7 spec to contain fine-grained cache control bits).
+ */
+ actlr = read_actlr();
+ if (!(actlr & 0x00000002)) {
+ printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+ write_actlr(actlr | 0x00000002);
+ }
+
+ mode = "ARMv7";
+ }
+#endif
+
+ if (mode == NULL) {
+ printk(KERN_CRIT "Tauros2: Unable to detect CPU mode.\n");
+ return;
+ }
+
+ printk(KERN_INFO "Tauros2: L2 cache support initialised "
+ "in %s mode.\n", mode);
+}
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 4127a7b..841f355 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -41,6 +41,14 @@
kfrom = kmap_atomic(from, KM_USER0);
kto = kmap_atomic(to, KM_USER1);
copy_page(kto, kfrom);
+#ifdef CONFIG_HIGHMEM
+ /*
+ * kmap_atomic() doesn't set the page virtual address, and
+ * kunmap_atomic() takes care of cache flushing already.
+ */
+ if (page_address(to) != NULL)
+#endif
+ __cpuc_flush_dcache_page(kto);
kunmap_atomic(kto, KM_USER1);
kunmap_atomic(kfrom, KM_USER0);
}
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index b9590a7..26325cb 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -63,435 +63,86 @@
return mask;
}
-#ifdef CONFIG_MMU
/*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ * Allocate a DMA buffer for 'dev' of size 'size' using the
+ * specified gfp mask. Note that 'size' must be page aligned.
*/
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
-static DEFINE_SPINLOCK(consistent_lock);
-
-/*
- * VM region handling support.
- *
- * This should become something generic, handling VM region allocations for
- * vmalloc and similar (ioremap, module space, etc).
- *
- * I envisage vmalloc()'s supporting vm_struct becoming:
- *
- * struct vm_struct {
- * struct vm_region region;
- * unsigned long flags;
- * struct page **pages;
- * unsigned int nr_pages;
- * unsigned long phys_addr;
- * };
- *
- * get_vm_area() would then call vm_region_alloc with an appropriate
- * struct vm_region head (eg):
- *
- * struct vm_region vmalloc_head = {
- * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
- * .vm_start = VMALLOC_START,
- * .vm_end = VMALLOC_END,
- * };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.) I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vm_region_alloc().
- */
-struct arm_vm_region {
- struct list_head vm_list;
- unsigned long vm_start;
- unsigned long vm_end;
- struct page *vm_pages;
- int vm_active;
-};
-
-static struct arm_vm_region consistent_head = {
- .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
- .vm_start = CONSISTENT_BASE,
- .vm_end = CONSISTENT_END,
-};
-
-static struct arm_vm_region *
-arm_vm_region_alloc(struct arm_vm_region *head, size_t size, gfp_t gfp)
+static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gfp)
{
- unsigned long addr = head->vm_start, end = head->vm_end - size;
- unsigned long flags;
- struct arm_vm_region *c, *new;
-
- new = kmalloc(sizeof(struct arm_vm_region), gfp);
- if (!new)
- goto out;
-
- spin_lock_irqsave(&consistent_lock, flags);
-
- list_for_each_entry(c, &head->vm_list, vm_list) {
- if ((addr + size) < addr)
- goto nospc;
- if ((addr + size) <= c->vm_start)
- goto found;
- addr = c->vm_end;
- if (addr > end)
- goto nospc;
- }
-
- found:
- /*
- * Insert this entry _before_ the one we found.
- */
- list_add_tail(&new->vm_list, &c->vm_list);
- new->vm_start = addr;
- new->vm_end = addr + size;
- new->vm_active = 1;
-
- spin_unlock_irqrestore(&consistent_lock, flags);
- return new;
-
- nospc:
- spin_unlock_irqrestore(&consistent_lock, flags);
- kfree(new);
- out:
- return NULL;
-}
-
-static struct arm_vm_region *arm_vm_region_find(struct arm_vm_region *head, unsigned long addr)
-{
- struct arm_vm_region *c;
-
- list_for_each_entry(c, &head->vm_list, vm_list) {
- if (c->vm_active && c->vm_start == addr)
- goto out;
- }
- c = NULL;
- out:
- return c;
-}
-
-#ifdef CONFIG_HUGETLB_PAGE
-#error ARM Coherent DMA allocator does not (yet) support huge TLB
-#endif
-
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
- pgprot_t prot)
-{
- struct page *page;
- struct arm_vm_region *c;
- unsigned long order;
+ unsigned long order = get_order(size);
+ struct page *page, *p, *e;
+ void *ptr;
u64 mask = get_coherent_dma_mask(dev);
- u64 limit;
- if (!consistent_pte[0]) {
- printk(KERN_ERR "%s: not initialised\n", __func__);
- dump_stack();
+#ifdef CONFIG_DMA_API_DEBUG
+ u64 limit = (mask + 1) & ~mask;
+ if (limit && size >= limit) {
+ dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n",
+ size, mask);
return NULL;
}
+#endif
if (!mask)
- goto no_page;
-
- /*
- * Sanity check the allocation size.
- */
- size = PAGE_ALIGN(size);
- limit = (mask + 1) & ~mask;
- if ((limit && size >= limit) ||
- size >= (CONSISTENT_END - CONSISTENT_BASE)) {
- printk(KERN_WARNING "coherent allocation too big "
- "(requested %#x mask %#llx)\n", size, mask);
- goto no_page;
- }
-
- order = get_order(size);
+ return NULL;
if (mask < 0xffffffffULL)
gfp |= GFP_DMA;
page = alloc_pages(gfp, order);
if (!page)
- goto no_page;
+ return NULL;
/*
- * Invalidate any data that might be lurking in the
- * kernel direct-mapped region for device DMA.
+ * Now split the huge page and free the excess pages
*/
- {
- void *ptr = page_address(page);
- memset(ptr, 0, size);
- dmac_flush_range(ptr, ptr + size);
- outer_flush_range(__pa(ptr), __pa(ptr) + size);
- }
+ split_page(page, order);
+ for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++)
+ __free_page(p);
/*
- * Allocate a virtual address in the consistent mapping region.
+ * Ensure that the allocated pages are zeroed, and that any data
+ * lurking in the kernel direct-mapped region is invalidated.
*/
- c = arm_vm_region_alloc(&consistent_head, size,
- gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
- if (c) {
- pte_t *pte;
- struct page *end = page + (1 << order);
- int idx = CONSISTENT_PTE_INDEX(c->vm_start);
- u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+ ptr = page_address(page);
+ memset(ptr, 0, size);
+ dmac_flush_range(ptr, ptr + size);
+ outer_flush_range(__pa(ptr), __pa(ptr) + size);
- pte = consistent_pte[idx] + off;
- c->vm_pages = page;
-
- split_page(page, order);
-
- /*
- * Set the "dma handle"
- */
- *handle = page_to_dma(dev, page);
-
- do {
- BUG_ON(!pte_none(*pte));
-
- /*
- * x86 does not mark the pages reserved...
- */
- SetPageReserved(page);
- set_pte_ext(pte, mk_pte(page, prot), 0);
- page++;
- pte++;
- off++;
- if (off >= PTRS_PER_PTE) {
- off = 0;
- pte = consistent_pte[++idx];
- }
- } while (size -= PAGE_SIZE);
-
- /*
- * Free the otherwise unused pages.
- */
- while (page < end) {
- __free_page(page);
- page++;
- }
-
- return (void *)c->vm_start;
- }
-
- if (page)
- __free_pages(page, order);
- no_page:
- *handle = ~0;
- return NULL;
+ return page;
}
-#else /* !CONFIG_MMU */
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
- pgprot_t prot)
-{
- void *virt;
- u64 mask = get_coherent_dma_mask(dev);
-
- if (!mask)
- goto error;
-
- if (mask < 0xffffffffULL)
- gfp |= GFP_DMA;
- virt = kmalloc(size, gfp);
- if (!virt)
- goto error;
-
- *handle = virt_to_dma(dev, virt);
- return virt;
-
-error:
- *handle = ~0;
- return NULL;
-}
-#endif /* CONFIG_MMU */
/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
+ * Free a DMA buffer. 'size' must be page aligned.
*/
-void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+static void __dma_free_buffer(struct page *page, size_t size)
{
- void *memory;
+ struct page *e = page + (size >> PAGE_SHIFT);
- if (dma_alloc_from_coherent(dev, size, handle, &memory))
- return memory;
-
- if (arch_is_coherent()) {
- void *virt;
-
- virt = kmalloc(size, gfp);
- if (!virt)
- return NULL;
- *handle = virt_to_dma(dev, virt);
-
- return virt;
+ while (page < e) {
+ __free_page(page);
+ page++;
}
-
- return __dma_alloc(dev, size, handle, gfp,
- pgprot_noncached(pgprot_kernel));
}
-EXPORT_SYMBOL(dma_alloc_coherent);
-/*
- * Allocate a writecombining region, in much the same way as
- * dma_alloc_coherent above.
- */
-void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
-{
- return __dma_alloc(dev, size, handle, gfp,
- pgprot_writecombine(pgprot_kernel));
-}
-EXPORT_SYMBOL(dma_alloc_writecombine);
-
-static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
- int ret = -ENXIO;
#ifdef CONFIG_MMU
- unsigned long flags, user_size, kern_size;
- struct arm_vm_region *c;
-
- user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
-
- spin_lock_irqsave(&consistent_lock, flags);
- c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
- spin_unlock_irqrestore(&consistent_lock, flags);
-
- if (c) {
- unsigned long off = vma->vm_pgoff;
-
- kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
-
- if (off < kern_size &&
- user_size <= (kern_size - off)) {
- ret = remap_pfn_range(vma, vma->vm_start,
- page_to_pfn(c->vm_pages) + off,
- user_size << PAGE_SHIFT,
- vma->vm_page_prot);
- }
- }
-#endif /* CONFIG_MMU */
-
- return ret;
-}
-
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_coherent);
-
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
- void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
- return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_writecombine);
-
/*
- * free a page as defined by the above mapping.
- * Must not be called with IRQs disabled.
+ * These are the page tables (2MB each) covering uncached, DMA consistent allocations
*/
-#ifdef CONFIG_MMU
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
- struct arm_vm_region *c;
- unsigned long flags, addr;
- pte_t *ptep;
- int idx;
- u32 off;
+static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
- WARN_ON(irqs_disabled());
+#include "vmregion.h"
- if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
- return;
+static struct arm_vmregion_head consistent_head = {
+ .vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
+ .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
+ .vm_start = CONSISTENT_BASE,
+ .vm_end = CONSISTENT_END,
+};
- if (arch_is_coherent()) {
- kfree(cpu_addr);
- return;
- }
-
- size = PAGE_ALIGN(size);
-
- spin_lock_irqsave(&consistent_lock, flags);
- c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
- if (!c)
- goto no_area;
-
- c->vm_active = 0;
- spin_unlock_irqrestore(&consistent_lock, flags);
-
- if ((c->vm_end - c->vm_start) != size) {
- printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
- __func__, c->vm_end - c->vm_start, size);
- dump_stack();
- size = c->vm_end - c->vm_start;
- }
-
- idx = CONSISTENT_PTE_INDEX(c->vm_start);
- off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
- ptep = consistent_pte[idx] + off;
- addr = c->vm_start;
- do {
- pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
- unsigned long pfn;
-
- ptep++;
- addr += PAGE_SIZE;
- off++;
- if (off >= PTRS_PER_PTE) {
- off = 0;
- ptep = consistent_pte[++idx];
- }
-
- if (!pte_none(pte) && pte_present(pte)) {
- pfn = pte_pfn(pte);
-
- if (pfn_valid(pfn)) {
- struct page *page = pfn_to_page(pfn);
-
- /*
- * x86 does not mark the pages reserved...
- */
- ClearPageReserved(page);
-
- __free_page(page);
- continue;
- }
- }
-
- printk(KERN_CRIT "%s: bad page in kernel page table\n",
- __func__);
- } while (size -= PAGE_SIZE);
-
- flush_tlb_kernel_range(c->vm_start, c->vm_end);
-
- spin_lock_irqsave(&consistent_lock, flags);
- list_del(&c->vm_list);
- spin_unlock_irqrestore(&consistent_lock, flags);
-
- kfree(c);
- return;
-
- no_area:
- spin_unlock_irqrestore(&consistent_lock, flags);
- printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
- __func__, cpu_addr);
- dump_stack();
-}
-#else /* !CONFIG_MMU */
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
- if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
- return;
- kfree(cpu_addr);
-}
-#endif /* CONFIG_MMU */
-EXPORT_SYMBOL(dma_free_coherent);
+#ifdef CONFIG_HUGETLB_PAGE
+#error ARM Coherent DMA allocator does not (yet) support huge TLB
+#endif
/*
* Initialise the consistent memory allocation.
@@ -499,7 +150,6 @@
static int __init consistent_init(void)
{
int ret = 0;
-#ifdef CONFIG_MMU
pgd_t *pgd;
pmd_t *pmd;
pte_t *pte;
@@ -526,13 +176,228 @@
consistent_pte[i++] = pte;
base += (1 << PGDIR_SHIFT);
} while (base < CONSISTENT_END);
-#endif /* !CONFIG_MMU */
return ret;
}
core_initcall(consistent_init);
+static void *
+__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
+{
+ struct arm_vmregion *c;
+
+ if (!consistent_pte[0]) {
+ printk(KERN_ERR "%s: not initialised\n", __func__);
+ dump_stack();
+ return NULL;
+ }
+
+ /*
+ * Allocate a virtual address in the consistent mapping region.
+ */
+ c = arm_vmregion_alloc(&consistent_head, size,
+ gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+ if (c) {
+ pte_t *pte;
+ int idx = CONSISTENT_PTE_INDEX(c->vm_start);
+ u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+
+ pte = consistent_pte[idx] + off;
+ c->vm_pages = page;
+
+ do {
+ BUG_ON(!pte_none(*pte));
+
+ set_pte_ext(pte, mk_pte(page, prot), 0);
+ page++;
+ pte++;
+ off++;
+ if (off >= PTRS_PER_PTE) {
+ off = 0;
+ pte = consistent_pte[++idx];
+ }
+ } while (size -= PAGE_SIZE);
+
+ return (void *)c->vm_start;
+ }
+ return NULL;
+}
+
+static void __dma_free_remap(void *cpu_addr, size_t size)
+{
+ struct arm_vmregion *c;
+ unsigned long addr;
+ pte_t *ptep;
+ int idx;
+ u32 off;
+
+ c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
+ if (!c) {
+ printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+ __func__, cpu_addr);
+ dump_stack();
+ return;
+ }
+
+ if ((c->vm_end - c->vm_start) != size) {
+ printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+ __func__, c->vm_end - c->vm_start, size);
+ dump_stack();
+ size = c->vm_end - c->vm_start;
+ }
+
+ idx = CONSISTENT_PTE_INDEX(c->vm_start);
+ off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+ ptep = consistent_pte[idx] + off;
+ addr = c->vm_start;
+ do {
+ pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
+
+ ptep++;
+ addr += PAGE_SIZE;
+ off++;
+ if (off >= PTRS_PER_PTE) {
+ off = 0;
+ ptep = consistent_pte[++idx];
+ }
+
+ if (pte_none(pte) || !pte_present(pte))
+ printk(KERN_CRIT "%s: bad page in kernel page table\n",
+ __func__);
+ } while (size -= PAGE_SIZE);
+
+ flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+ arm_vmregion_free(&consistent_head, c);
+}
+
+#else /* !CONFIG_MMU */
+
+#define __dma_alloc_remap(page, size, gfp, prot) page_address(page)
+#define __dma_free_remap(addr, size) do { } while (0)
+
+#endif /* CONFIG_MMU */
+
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+ pgprot_t prot)
+{
+ struct page *page;
+ void *addr;
+
+ *handle = ~0;
+ size = PAGE_ALIGN(size);
+
+ page = __dma_alloc_buffer(dev, size, gfp);
+ if (!page)
+ return NULL;
+
+ if (!arch_is_coherent())
+ addr = __dma_alloc_remap(page, size, gfp, prot);
+ else
+ addr = page_address(page);
+
+ if (addr)
+ *handle = page_to_dma(dev, page);
+
+ return addr;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+ void *memory;
+
+ if (dma_alloc_from_coherent(dev, size, handle, &memory))
+ return memory;
+
+ return __dma_alloc(dev, size, handle, gfp,
+ pgprot_dmacoherent(pgprot_kernel));
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+/*
+ * Allocate a writecombining region, in much the same way as
+ * dma_alloc_coherent above.
+ */
+void *
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+ return __dma_alloc(dev, size, handle, gfp,
+ pgprot_writecombine(pgprot_kernel));
+}
+EXPORT_SYMBOL(dma_alloc_writecombine);
+
+static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+ int ret = -ENXIO;
+#ifdef CONFIG_MMU
+ unsigned long user_size, kern_size;
+ struct arm_vmregion *c;
+
+ user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+
+ c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
+ if (c) {
+ unsigned long off = vma->vm_pgoff;
+
+ kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
+
+ if (off < kern_size &&
+ user_size <= (kern_size - off)) {
+ ret = remap_pfn_range(vma, vma->vm_start,
+ page_to_pfn(c->vm_pages) + off,
+ user_size << PAGE_SHIFT,
+ vma->vm_page_prot);
+ }
+ }
+#endif /* CONFIG_MMU */
+
+ return ret;
+}
+
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+ vma->vm_page_prot = pgprot_dmacoherent(vma->vm_page_prot);
+ return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+EXPORT_SYMBOL(dma_mmap_coherent);
+
+int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+ return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+EXPORT_SYMBOL(dma_mmap_writecombine);
+
+/*
+ * free a page as defined by the above mapping.
+ * Must not be called with IRQs disabled.
+ */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+ WARN_ON(irqs_disabled());
+
+ if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+ return;
+
+ size = PAGE_ALIGN(size);
+
+ if (!arch_is_coherent())
+ __dma_free_remap(cpu_addr, size);
+
+ __dma_free_buffer(dma_to_page(dev, handle), size);
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
/*
* Make an area consistent for devices.
* Note: Drivers should NOT use this function directly, as it will break
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index d0d17b6..7296022 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -23,6 +23,8 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include "mm.h"
+
static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
/*
@@ -151,7 +153,14 @@
if (!pfn_valid(pfn))
return;
+ /*
+ * The zero page is never written to, so never has any dirty
+ * cache lines, and therefore never needs to be flushed.
+ */
page = pfn_to_page(pfn);
+ if (page == ZERO_PAGE(0))
+ return;
+
mapping = page_mapping(page);
#ifndef CONFIG_SMP
if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 7f294f3..329594e 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -35,14 +35,12 @@
:
: "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
- __flush_icache_all();
}
void flush_cache_mm(struct mm_struct *mm)
{
if (cache_is_vivt()) {
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
- __cpuc_flush_user_all();
+ vivt_flush_cache_mm(mm);
return;
}
@@ -52,16 +50,13 @@
:
: "r" (0)
: "cc");
- __flush_icache_all();
}
}
void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
if (cache_is_vivt()) {
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
- __cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
- vma->vm_flags);
+ vivt_flush_cache_range(vma, start, end);
return;
}
@@ -71,22 +66,26 @@
:
: "r" (0)
: "cc");
- __flush_icache_all();
}
+
+ if (vma->vm_flags & VM_EXEC)
+ __flush_icache_all();
}
void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
{
if (cache_is_vivt()) {
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
- unsigned long addr = user_addr & PAGE_MASK;
- __cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
- }
+ vivt_flush_cache_page(vma, user_addr, pfn);
return;
}
- if (cache_is_vipt_aliasing())
+ if (cache_is_vipt_aliasing()) {
flush_pfn_alias(pfn, user_addr);
+ __flush_icache_all();
+ }
+
+ if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
+ __flush_icache_all();
}
void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
@@ -94,15 +93,13 @@
unsigned long len, int write)
{
if (cache_is_vivt()) {
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
- unsigned long addr = (unsigned long)kaddr;
- __cpuc_coherent_kern_range(addr, addr + len);
- }
+ vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
return;
}
if (cache_is_vipt_aliasing()) {
flush_pfn_alias(page_to_pfn(page), uaddr);
+ __flush_icache_all();
return;
}
@@ -120,6 +117,8 @@
void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
+ void *addr = page_address(page);
+
/*
* Writeback any data associated with the kernel mapping of this
* page. This ensures that data in the physical page is mutually
@@ -130,9 +129,9 @@
* kmap_atomic() doesn't set the page virtual address, and
* kunmap_atomic() takes care of cache flushing already.
*/
- if (page_address(page))
+ if (addr)
#endif
- __cpuc_flush_dcache_page(page_address(page));
+ __cpuc_flush_dcache_page(addr);
/*
* If this is a page cache page, and we have an aliasing VIPT cache,
@@ -196,7 +195,16 @@
*/
void flush_dcache_page(struct page *page)
{
- struct address_space *mapping = page_mapping(page);
+ struct address_space *mapping;
+
+ /*
+ * The zero page is never written to, so never has any dirty
+ * cache lines, and therefore never needs to be flushed.
+ */
+ if (page == ZERO_PAGE(0))
+ return;
+
+ mapping = page_mapping(page);
#ifndef CONFIG_SMP
if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
@@ -242,6 +250,7 @@
* userspace address only.
*/
flush_pfn_alias(pfn, vmaddr);
+ __flush_icache_all();
}
/*
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index c4f6f05..a888363 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -24,6 +24,8 @@
const struct mem_type *get_mem_type(unsigned int type);
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+
#endif
struct map_desc;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ea67be0..8c7fbd1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -881,7 +881,7 @@
BOOTMEM_EXCLUSIVE);
}
- if (machine_is_treo680()) {
+ if (machine_is_treo680() || machine_is_centro()) {
reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
BOOTMEM_EXCLUSIVE);
reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
@@ -1036,7 +1036,7 @@
*/
zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
empty_zero_page = virt_to_page(zero_page);
- flush_dcache_page(empty_zero_page);
+ __flush_dcache_page(NULL, empty_zero_page);
}
/*
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 70f75d2..5485c82 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -130,9 +130,16 @@
-
+ .type cpu_v6_name, #object
cpu_v6_name:
.asciz "ARMv6-compatible processor"
+ .size cpu_v6_name, . - cpu_v6_name
+
+ .type cpu_pj4_name, #object
+cpu_pj4_name:
+ .asciz "Marvell PJ4 processor"
+ .size cpu_pj4_name, . - cpu_pj4_name
+
.align
__INIT
@@ -241,3 +248,27 @@
.long v6_user_fns
.long v6_cache_fns
.size __v6_proc_info, . - __v6_proc_info
+
+ .type __pj4_v6_proc_info, #object
+__pj4_v6_proc_info:
+ .long 0x560f5810
+ .long 0xff0ffff0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_XN | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __v6_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_pj4_name
+ .long v6_processor_functions
+ .long v6wbi_tlb_fns
+ .long v6_user_fns
+ .long v6_cache_fns
+ .size __pj4_v6_proc_info, . - __pj4_v6_proc_info
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 2028f37..fab134e 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -396,7 +396,7 @@
orr r4, r4, #0x18 @ cache the page table in L2
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
- mov r0, #0 @ don't allow CP access
+ mov r0, #1 << 6 @ cp6 access for early sched_clock
mcr p15, 0, r0, c15, c1, 0 @ write CP access register
mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
new file mode 100644
index 0000000..19e09bdb
--- /dev/null
+++ b/arch/arm/mm/vmregion.c
@@ -0,0 +1,131 @@
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+
+#include "vmregion.h"
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ * struct vm_struct {
+ * struct vmregion region;
+ * unsigned long flags;
+ * struct page **pages;
+ * unsigned int nr_pages;
+ * unsigned long phys_addr;
+ * };
+ *
+ * get_vm_area() would then call vmregion_alloc with an appropriate
+ * struct vmregion head (eg):
+ *
+ * struct vmregion vmalloc_head = {
+ * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
+ * .vm_start = VMALLOC_START,
+ * .vm_end = VMALLOC_END,
+ * };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.) I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vmregion_alloc().
+ */
+
+struct arm_vmregion *
+arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
+{
+ unsigned long addr = head->vm_start, end = head->vm_end - size;
+ unsigned long flags;
+ struct arm_vmregion *c, *new;
+
+ if (head->vm_end - head->vm_start < size) {
+ printk(KERN_WARNING "%s: allocation too big (requested %#x)\n",
+ __func__, size);
+ goto out;
+ }
+
+ new = kmalloc(sizeof(struct arm_vmregion), gfp);
+ if (!new)
+ goto out;
+
+ spin_lock_irqsave(&head->vm_lock, flags);
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if ((addr + size) < addr)
+ goto nospc;
+ if ((addr + size) <= c->vm_start)
+ goto found;
+ addr = c->vm_end;
+ if (addr > end)
+ goto nospc;
+ }
+
+ found:
+ /*
+ * Insert this entry _before_ the one we found.
+ */
+ list_add_tail(&new->vm_list, &c->vm_list);
+ new->vm_start = addr;
+ new->vm_end = addr + size;
+ new->vm_active = 1;
+
+ spin_unlock_irqrestore(&head->vm_lock, flags);
+ return new;
+
+ nospc:
+ spin_unlock_irqrestore(&head->vm_lock, flags);
+ kfree(new);
+ out:
+ return NULL;
+}
+
+static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+ struct arm_vmregion *c;
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if (c->vm_active && c->vm_start == addr)
+ goto out;
+ }
+ c = NULL;
+ out:
+ return c;
+}
+
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+ struct arm_vmregion *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&head->vm_lock, flags);
+ c = __arm_vmregion_find(head, addr);
+ spin_unlock_irqrestore(&head->vm_lock, flags);
+ return c;
+}
+
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr)
+{
+ struct arm_vmregion *c;
+ unsigned long flags;
+
+ spin_lock_irqsave(&head->vm_lock, flags);
+ c = __arm_vmregion_find(head, addr);
+ if (c)
+ c->vm_active = 0;
+ spin_unlock_irqrestore(&head->vm_lock, flags);
+ return c;
+}
+
+void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&head->vm_lock, flags);
+ list_del(&c->vm_list);
+ spin_unlock_irqrestore(&head->vm_lock, flags);
+
+ kfree(c);
+}
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
new file mode 100644
index 0000000..6b2cdbd
--- /dev/null
+++ b/arch/arm/mm/vmregion.h
@@ -0,0 +1,29 @@
+#ifndef VMREGION_H
+#define VMREGION_H
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+struct page;
+
+struct arm_vmregion_head {
+ spinlock_t vm_lock;
+ struct list_head vm_list;
+ unsigned long vm_start;
+ unsigned long vm_end;
+};
+
+struct arm_vmregion {
+ struct list_head vm_list;
+ unsigned long vm_start;
+ unsigned long vm_end;
+ struct page *vm_pages;
+ int vm_active;
+};
+
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
+void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
+
+#endif
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 8da95d5..6c8a02a 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -19,6 +19,8 @@
#include <linux/init.h>
#include <linux/timex.h>
#include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
@@ -26,45 +28,136 @@
#include <asm/mach/time.h>
#include <mach/time.h>
-static unsigned long ticks_per_jiffy;
-static unsigned long ticks_per_usec;
-static unsigned long next_jiffy_time;
-
-unsigned long iop_gettimeoffset(void)
+/*
+ * IOP clocksource (free-running timer 1).
+ */
+static cycle_t iop_clocksource_read(struct clocksource *unused)
{
- unsigned long offset, temp;
+ return 0xffffffffu - read_tcr1();
+}
- /* enable cp6, if necessary, to avoid taking the overhead of an
- * undefined instruction trap
- */
- asm volatile (
- "mrc p15, 0, %0, c15, c1, 0\n\t"
- "tst %0, #(1 << 6)\n\t"
- "orreq %0, %0, #(1 << 6)\n\t"
- "mcreq p15, 0, %0, c15, c1, 0\n\t"
-#ifdef CONFIG_CPU_XSCALE
- "mrceq p15, 0, %0, c15, c1, 0\n\t"
- "moveq %0, %0\n\t"
- "subeq pc, pc, #4\n\t"
-#endif
- : "=r"(temp) : : "cc");
+static struct clocksource iop_clocksource = {
+ .name = "iop_timer1",
+ .rating = 300,
+ .read = iop_clocksource_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
- offset = next_jiffy_time - read_tcr1();
+static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz)
+{
+ u64 temp;
+ u32 shift;
- return offset / ticks_per_usec;
+ /* Find shift and mult values for hz. */
+ shift = 32;
+ do {
+ temp = (u64) NSEC_PER_SEC << shift;
+ do_div(temp, hz);
+ if ((temp >> 32) == 0)
+ break;
+ } while (--shift != 0);
+
+ cs->shift = shift;
+ cs->mult = (u32) temp;
+
+ printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n",
+ cs->name, cs->shift, cs->mult);
+}
+
+/*
+ * IOP sched_clock() implementation via its clocksource.
+ */
+unsigned long long sched_clock(void)
+{
+ cycle_t cyc = iop_clocksource_read(NULL);
+ struct clocksource *cs = &iop_clocksource;
+
+ return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+}
+
+/*
+ * IOP clockevents (interrupting timer 0).
+ */
+static int iop_set_next_event(unsigned long delta,
+ struct clock_event_device *unused)
+{
+ u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
+
+ BUG_ON(delta == 0);
+ write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
+ write_tcr0(delta);
+ write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
+
+ return 0;
+}
+
+static unsigned long ticks_per_jiffy;
+
+static void iop_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *unused)
+{
+ u32 tmr = read_tmr0();
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ write_tmr0(tmr & ~IOP_TMR_EN);
+ write_tcr0(ticks_per_jiffy - 1);
+ tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* ->set_next_event sets period and enables timer */
+ tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ tmr |= IOP_TMR_EN;
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ default:
+ tmr &= ~IOP_TMR_EN;
+ break;
+ }
+
+ write_tmr0(tmr);
+}
+
+static struct clock_event_device iop_clockevent = {
+ .name = "iop_timer0",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 300,
+ .set_next_event = iop_set_next_event,
+ .set_mode = iop_set_mode,
+};
+
+static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz)
+{
+ u64 temp;
+ u32 shift;
+
+ /* Find shift and mult values for hz. */
+ shift = 32;
+ do {
+ temp = (u64) hz << shift;
+ do_div(temp, NSEC_PER_SEC);
+ if ((temp >> 32) == 0)
+ break;
+ } while (--shift != 0);
+
+ ce->shift = shift;
+ ce->mult = (u32) temp;
+
+ printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n",
+ ce->name, ce->shift, ce->mult);
}
static irqreturn_t
iop_timer_interrupt(int irq, void *dev_id)
{
+ struct clock_event_device *evt = dev_id;
+
write_tisr(1);
-
- while ((signed long)(next_jiffy_time - read_tcr1())
- >= ticks_per_jiffy) {
- timer_tick();
- next_jiffy_time -= ticks_per_jiffy;
- }
-
+ evt->event_handler(evt);
return IRQ_HANDLED;
}
@@ -72,6 +165,7 @@
.name = "IOP Timer Tick",
.handler = iop_timer_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .dev_id = &iop_clockevent,
};
static unsigned long iop_tick_rate;
@@ -86,21 +180,33 @@
u32 timer_ctl;
ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
- ticks_per_usec = tick_rate / 1000000;
- next_jiffy_time = 0xffffffff;
iop_tick_rate = tick_rate;
timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
/*
- * We use timer 0 for our timer interrupt, and timer 1 as
- * monotonic counter for tracking missed jiffies.
+ * Set up interrupting clockevent timer 0.
*/
- write_trr0(ticks_per_jiffy - 1);
- write_tmr0(timer_ctl);
- write_trr1(0xffffffff);
- write_tmr1(timer_ctl);
-
+ write_tmr0(timer_ctl & ~IOP_TMR_EN);
setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
+ iop_clockevent_set_hz(&iop_clockevent, tick_rate);
+ iop_clockevent.max_delta_ns =
+ clockevent_delta2ns(0xfffffffe, &iop_clockevent);
+ iop_clockevent.min_delta_ns =
+ clockevent_delta2ns(0xf, &iop_clockevent);
+ iop_clockevent.cpumask = cpumask_of(0);
+ clockevents_register_device(&iop_clockevent);
+ write_trr0(ticks_per_jiffy - 1);
+ write_tcr0(ticks_per_jiffy - 1);
+ write_tmr0(timer_ctl);
+
+ /*
+ * Set up free-running clocksource timer 1.
+ */
+ write_trr1(0xffffffff);
+ write_tcr1(0xffffffff);
+ write_tmr1(timer_ctl);
+ iop_clocksource_set_hz(&iop_clocksource, tick_rate);
+ clocksource_register(&iop_clocksource);
}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index ca5c7c2..8b0a1ee 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -69,10 +69,20 @@
help
Enable support for the i.MX PWM controller(s).
+config MXC_ULPI
+ bool
+
config ARCH_HAS_RNGA
bool
depends on ARCH_MXC
config ARCH_MXC_IOMUX_V3
bool
+
+config ARCH_MXC_AUDMUX_V1
+ bool
+
+config ARCH_MXC_AUDMUX_V2
+ bool
+
endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index e3212c8..4cbca9d 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -9,3 +9,6 @@
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
+obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
new file mode 100644
index 0000000..da6387d
--- /dev/null
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <mach/audmux.h>
+#include <mach/hardware.h>
+
+static void __iomem *audmux_base;
+
+static unsigned char port_mapping[] = {
+ 0x0, 0x4, 0x8, 0x10, 0x14, 0x1c,
+};
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr)
+{
+ if (!audmux_base) {
+ printk("%s: not configured\n", __func__);
+ return -ENOSYS;
+ }
+
+ if (port >= ARRAY_SIZE(port_mapping))
+ return -EINVAL;
+
+ writel(pcr, audmux_base + port_mapping[port]);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
+
+static int mxc_audmux_v1_init(void)
+{
+ if (cpu_is_mx27() || cpu_is_mx21())
+ audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+ return 0;
+}
+
+postcore_initcall(mxc_audmux_v1_init);
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
new file mode 100644
index 0000000..6f21096
--- /dev/null
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <mach/audmux.h>
+#include <mach/hardware.h>
+
+static struct clk *audmux_clk;
+static void __iomem *audmux_base;
+
+#define MXC_AUDMUX_V2_PTCR(x) ((x) * 8)
+#define MXC_AUDMUX_V2_PDCR(x) ((x) * 8 + 4)
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+ unsigned int pdcr)
+{
+ if (!audmux_base)
+ return -ENOSYS;
+
+ if (audmux_clk)
+ clk_enable(audmux_clk);
+
+ writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
+ writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+ if (audmux_clk)
+ clk_disable(audmux_clk);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
+
+static int mxc_audmux_v2_init(void)
+{
+ int ret;
+
+ if (cpu_is_mx35()) {
+ audmux_clk = clk_get(NULL, "audmux");
+ if (IS_ERR(audmux_clk)) {
+ ret = PTR_ERR(audmux_clk);
+ printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
+ ret);
+ return ret;
+ }
+ }
+
+ if (cpu_is_mx31() || cpu_is_mx35())
+ audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+
+ return 0;
+}
+
+postcore_initcall(mxc_audmux_v2_init);
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 7764643..9c1b3f9 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -156,7 +156,8 @@
}
now = min(imxdma->resbytes, sg->length);
- imxdma->resbytes -= now;
+ if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP)
+ imxdma->resbytes -= now;
if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
__raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index cfc4a8b..d65ebe3 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -282,7 +282,7 @@
for (j = port[i].virtual_irq_start;
j < port[i].virtual_irq_start + 32; j++) {
set_irq_chip(j, &gpio_irq_chip);
- set_irq_handler(j, handle_edge_irq);
+ set_irq_handler(j, handle_level_irq);
set_irq_flags(j, IRQF_VALID);
}
diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h
new file mode 100644
index 0000000..5cd6466
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/audmux.h
@@ -0,0 +1,52 @@
+#ifndef __MACH_AUDMUX_H
+#define __MACH_AUDMUX_H
+
+#define MX27_AUDMUX_HPCR1_SSI0 0
+#define MX27_AUDMUX_HPCR2_SSI1 1
+#define MX27_AUDMUX_HPCR3_SSI_PINS_4 2
+#define MX27_AUDMUX_PPCR1_SSI_PINS_1 3
+#define MX27_AUDMUX_PPCR2_SSI_PINS_2 4
+#define MX27_AUDMUX_PPCR3_SSI_PINS_3 5
+
+#define MX31_AUDMUX_PORT1_SSI0 0
+#define MX31_AUDMUX_PORT2_SSI1 1
+#define MX31_AUDMUX_PORT3_SSI_PINS_3 2
+#define MX31_AUDMUX_PORT4_SSI_PINS_4 3
+#define MX31_AUDMUX_PORT5_SSI_PINS_5 4
+#define MX31_AUDMUX_PORT6_SSI_PINS_6 5
+
+/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff)
+#define MXC_AUDMUX_V1_PCR_INMEN (1 << 8)
+#define MXC_AUDMUX_V1_PCR_TXRXEN (1 << 10)
+#define MXC_AUDMUX_V1_PCR_SYN (1 << 12)
+#define MXC_AUDMUX_V1_PCR_RXDSEL(x) (((x) & 0x7) << 13)
+#define MXC_AUDMUX_V1_PCR_RFCSEL(x) (((x) & 0xf) << 20)
+#define MXC_AUDMUX_V1_PCR_RCLKDIR (1 << 24)
+#define MXC_AUDMUX_V1_PCR_RFSDIR (1 << 25)
+#define MXC_AUDMUX_V1_PCR_TFCSEL(x) (((x) & 0xf) << 26)
+#define MXC_AUDMUX_V1_PCR_TCLKDIR (1 << 30)
+#define MXC_AUDMUX_V1_PCR_TFSDIR (1 << 31)
+
+/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V2_PTCR_TFSDIR (1 << 31)
+#define MXC_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27)
+#define MXC_AUDMUX_V2_PTCR_TCLKDIR (1 << 26)
+#define MXC_AUDMUX_V2_PTCR_TCSEL(x) (((x) & 0xf) << 22)
+#define MXC_AUDMUX_V2_PTCR_RFSDIR (1 << 21)
+#define MXC_AUDMUX_V2_PTCR_RFSEL(x) (((x) & 0xf) << 17)
+#define MXC_AUDMUX_V2_PTCR_RCLKDIR (1 << 16)
+#define MXC_AUDMUX_V2_PTCR_RCSEL(x) (((x) & 0xf) << 12)
+#define MXC_AUDMUX_V2_PTCR_SYN (1 << 11)
+
+#define MXC_AUDMUX_V2_PDCR_RXDSEL(x) (((x) & 0x7) << 13)
+#define MXC_AUDMUX_V2_PDCR_TXRXEN (1 << 12)
+#define MXC_AUDMUX_V2_PDCR_MODE(x) (((x) & 0x3) << 8)
+#define MXC_AUDMUX_V2_PDCR_INMMASK(x) ((x) & 0xff)
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr);
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+ unsigned int pdcr);
+
+#endif /* __MACH_AUDMUX_H */
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
new file mode 100644
index 0000000..05ff2f3
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2009 Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H
+#define __ARM_ARCH_BOARD_KZM_ARM11_H
+
+/*
+ * KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1 (CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2 (CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1 (CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT (CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV (CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED (CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS (CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2 (CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550 (CS4_BASE_ADDR + 0x1050)
+
+#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 8e64325..0184b63 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -1,15 +1,42 @@
/*
* Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
*/
#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
+#ifndef __ASSEMBLY__
+enum mx31lilly_boards {
+ MX31LITE_NOBOARD = 0,
+ MX31LITE_DB = 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31lite_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
index b3876cc..07be8ad 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -58,6 +58,14 @@
unsigned int dma_length, unsigned int dev_addr,
unsigned int dmamode);
+
+/*
+ * Use this flag as the dma_length argument to imx_dma_setup_sg()
+ * to create an endless running dma loop. The end of the scatterlist
+ * must be linked to the beginning for this to work.
+ */
+#define IMX_DMA_LENGTH_LOOP ((unsigned int)-1)
+
int
imx_dma_setup_sg(int channel, struct scatterlist *sg,
unsigned int sgcount, unsigned int dma_length,
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 446f867..eaabd4e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -524,10 +524,18 @@
#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DCE1__DCD_DCE1 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RI_DCE1__RI_DCE1 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DSR_DCE1__DSR_DCE1 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DTR_DCE1__DTR_DCE1 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RXD2__RXD2 IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__DCD_DTE2 IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_RI_DTE1__RI_DTE2 IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_DSR_DTE1__DSR_DTE2 IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_DTR_DTE1__DTR_DTE2 IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE)
#define MX31_PIN_PC_RST__CTS5 IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
#define MX31_PIN_PC_VS2__RTS5 IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
#define MX31_PIN_PC_BVD2__TXD5 IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
@@ -623,6 +631,8 @@
#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__GPIO3_4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D5__GPIO3_5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
@@ -642,12 +652,22 @@
#define MX31_PIN_CSPI1_SS2__USBH1_RCV IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI1_SCLK__USBH1_OEB IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_SFS6__USBH1_SUSPEND IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_NFRE_B__GPIO1_11 IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_NFALE__GPIO1_12 IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
#define MX31_PIN_USBH2_DATA0__USBH2_DATA0 IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBH2_DATA1__USBH2_DATA1 IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD3__USBH2_DATA2 IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD3__USBH2_DATA3 IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK3__USBH2_DATA4 IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS3__USBH2_DATA5 IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD6__USBH2_DATA6 IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD6__USBH2_DATA7 IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBH2_CLK__USBH2_CLK IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBH2_DIR__USBH2_DIR IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBH2_NXT__USBH2_NXT IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBH2_STP__USBH2_STP IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK6__GPIO1_25 IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
@@ -693,7 +713,19 @@
#define MX31_PIN_DCD_DCE1__GPIO2_11 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
#define MX31_PIN_STXD5__GPIO1_21 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
#define MX31_PIN_SRXD5__GPIO1_22 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
-
+#define MX31_PIN_GPIO1_3__GPIO1_3 IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSPI2_SS1__CSPI3_SS1 IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_RTS1__GPIO2_6 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CTS1__GPIO2_7 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_LCS0__GPIO3_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD4__STXD4 IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD4__SRXD4 IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK4__SCK4 IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS4__SFS4 IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD5__STXD5 IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD5__SRXD5 IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK5__SCK5 IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS5__SFS5 IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index a0fa402..1deda01 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -88,9 +88,7 @@
#define PAD_CTL_SRE_FAST (1 << 0)
/*
- * setups a single pad:
- * - reserves the pad so that it is not claimed by another driver
- * - setups the iomux according to the configuration
+ * setups a single pad in the iomuxer
*/
int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
@@ -101,19 +99,6 @@
int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
/*
- * releases a single pad:
- * - make it available for a future use by another driver
- * - DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_v3_release_pad(struct pad_desc *pad);
-
-/*
- * releases multiple pads
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
-
-/*
* Initialise the iomux controller
*/
void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 6d49f8a..011cfcd 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -123,6 +123,7 @@
#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
+#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x)
extern void mxc_gpio_mode(int gpio_mode);
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 21112c6..bb297d8 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,46 +25,191 @@
#ifndef __ASM_ARCH_MXC_MX21_H__
#define __ASM_ARCH_MXC_MX21_H__
-/* Memory regions and CS */
-#define SDRAM_BASE_ADDR 0xC0000000
-#define CSD1_BASE_ADDR 0xC4000000
+#define MX21_AIPI_BASE_ADDR 0x10000000
+#define MX21_AIPI_BASE_ADDR_VIRT 0xf4000000
+#define MX21_AIPI_SIZE SZ_1M
+#define MX21_DMA_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x01000)
+#define MX21_WDOG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x02000)
+#define MX21_GPT1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x03000)
+#define MX21_GPT2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x04000)
+#define MX21_GPT3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x05000)
+#define MX21_PWM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x06000)
+#define MX21_RTC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x07000)
+#define MX21_KPP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x08000)
+#define MX21_OWIRE_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x09000)
+#define MX21_UART1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0a000)
+#define MX21_UART2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0b000)
+#define MX21_UART3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0c000)
+#define MX21_UART4_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0d000)
+#define MX21_CSPI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0e000)
+#define MX21_CSPI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x0f000)
+#define MX21_SSI1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x10000)
+#define MX21_SSI2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x11000)
+#define MX21_I2C_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x12000)
+#define MX21_SDHC1_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x13000)
+#define MX21_SDHC2_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x14000)
+#define MX21_GPIO_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x15000)
+#define MX21_AUDMUX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x16000)
+#define MX21_CSPI3_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x17000)
+#define MX21_LCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x21000)
+#define MX21_SLCDC_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x22000)
+#define MX21_USBOTG_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x24000)
+#define MX21_EMMA_PP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26000)
+#define MX21_EMMA_PRP_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x26400)
+#define MX21_CCM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27000)
+#define MX21_SYSCTRL_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x27800)
+#define MX21_JAM_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3e000)
+#define MX21_MAX_BASE_ADDR (MX21_AIPI_BASE_ADDR + 0x3f000)
-#define CS0_BASE_ADDR 0xC8000000
-#define CS1_BASE_ADDR 0xCC000000
-#define CS2_BASE_ADDR 0xD0000000
-#define CS3_BASE_ADDR 0xD1000000
-#define CS4_BASE_ADDR 0xD2000000
-#define CS5_BASE_ADDR 0xDD000000
-#define PCMCIA_MEM_BASE_ADDR 0xD4000000
+#define MX21_AVIC_BASE_ADDR 0x10040000
+
+#define MX21_SAHB1_BASE_ADDR 0x80000000
+#define MX21_SAHB1_BASE_ADDR_VIRT 0xf4100000
+#define MX21_SAHB1_SIZE SZ_1M
+#define MX21_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
+
+/* Memory regions and CS */
+#define MX21_SDRAM_BASE_ADDR 0xc0000000
+#define MX21_CSD1_BASE_ADDR 0xc4000000
+
+#define MX21_CS0_BASE_ADDR 0xc8000000
+#define MX21_CS1_BASE_ADDR 0xcc000000
+#define MX21_CS2_BASE_ADDR 0xd0000000
+#define MX21_CS3_BASE_ADDR 0xd1000000
+#define MX21_CS4_BASE_ADDR 0xd2000000
+#define MX21_PCMCIA_MEM_BASE_ADDR 0xd4000000
+#define MX21_CS5_BASE_ADDR 0xdd000000
/* NAND, SDRAM, WEIM etc controllers */
-#define X_MEMC_BASE_ADDR 0xDF000000
-#define X_MEMC_BASE_ADDR_VIRT 0xF4200000
-#define X_MEMC_SIZE SZ_256K
+#define MX21_X_MEMC_BASE_ADDR 0xdf000000
+#define MX21_X_MEMC_BASE_ADDR_VIRT 0xf4200000
+#define MX21_X_MEMC_SIZE SZ_256K
-#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000)
-#define EIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
-#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
-#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
+#define MX21_SDRAMC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x0000)
+#define MX21_EIM_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x1000)
+#define MX21_PCMCIA_CTL_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x2000)
+#define MX21_NFC_BASE_ADDR (MX21_X_MEMC_BASE_ADDR + 0x3000)
-#define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */
+#define MX21_IRAM_BASE_ADDR 0xffffe800 /* internal ram */
/* fixed interrupt numbers */
-#define MXC_INT_USBCTRL 58
-#define MXC_INT_USBCTRL 58
-#define MXC_INT_USBMNP 57
-#define MXC_INT_USBFUNC 56
-#define MXC_INT_USBHOST 55
-#define MXC_INT_USBDMA 54
-#define MXC_INT_USBWKUP 53
-#define MXC_INT_EMMADEC 50
-#define MXC_INT_EMMAENC 49
-#define MXC_INT_BMI 30
-#define MXC_INT_FIRI 9
+#define MX21_INT_CSPI3 6
+#define MX21_INT_GPIO 8
+#define MX21_INT_FIRI 9
+#define MX21_INT_SDHC2 10
+#define MX21_INT_SDHC1 11
+#define MX21_INT_I2C 12
+#define MX21_INT_SSI2 13
+#define MX21_INT_SSI1 14
+#define MX21_INT_CSPI2 15
+#define MX21_INT_CSPI1 16
+#define MX21_INT_UART4 17
+#define MX21_INT_UART3 18
+#define MX21_INT_UART2 19
+#define MX21_INT_UART1 20
+#define MX21_INT_KPP 21
+#define MX21_INT_RTC 22
+#define MX21_INT_PWM 23
+#define MX21_INT_GPT3 24
+#define MX21_INT_GPT2 25
+#define MX21_INT_GPT1 26
+#define MX21_INT_WDOG 27
+#define MX21_INT_PCMCIA 28
+#define MX21_INT_NANDFC 29
+#define MX21_INT_BMI 30
+#define MX21_INT_CSI 31
+#define MX21_INT_DMACH0 32
+#define MX21_INT_DMACH1 33
+#define MX21_INT_DMACH2 34
+#define MX21_INT_DMACH3 35
+#define MX21_INT_DMACH4 36
+#define MX21_INT_DMACH5 37
+#define MX21_INT_DMACH6 38
+#define MX21_INT_DMACH7 39
+#define MX21_INT_DMACH8 40
+#define MX21_INT_DMACH9 41
+#define MX21_INT_DMACH10 42
+#define MX21_INT_DMACH11 43
+#define MX21_INT_DMACH12 44
+#define MX21_INT_DMACH13 45
+#define MX21_INT_DMACH14 46
+#define MX21_INT_DMACH15 47
+#define MX21_INT_EMMAENC 49
+#define MX21_INT_EMMADEC 50
+#define MX21_INT_EMMAPRP 51
+#define MX21_INT_EMMAPP 52
+#define MX21_INT_USBWKUP 53
+#define MX21_INT_USBDMA 54
+#define MX21_INT_USBHOST 55
+#define MX21_INT_USBFUNC 56
+#define MX21_INT_USBMNP 57
+#define MX21_INT_USBCTRL 58
+#define MX21_INT_SLCDC 60
+#define MX21_INT_LCDC 61
/* fixed DMA request numbers */
-#define DMA_REQ_BMI_RX 29
-#define DMA_REQ_BMI_TX 28
-#define DMA_REQ_FIRI_RX 4
+#define MX21_DMA_REQ_CSPI3_RX 1
+#define MX21_DMA_REQ_CSPI3_TX 2
+#define MX21_DMA_REQ_EXT 3
+#define MX21_DMA_REQ_FIRI_RX 4
+#define MX21_DMA_REQ_SDHC2 6
+#define MX21_DMA_REQ_SDHC1 7
+#define MX21_DMA_REQ_SSI2_RX0 8
+#define MX21_DMA_REQ_SSI2_TX0 9
+#define MX21_DMA_REQ_SSI2_RX1 10
+#define MX21_DMA_REQ_SSI2_TX1 11
+#define MX21_DMA_REQ_SSI1_RX0 12
+#define MX21_DMA_REQ_SSI1_TX0 13
+#define MX21_DMA_REQ_SSI1_RX1 14
+#define MX21_DMA_REQ_SSI1_TX1 15
+#define MX21_DMA_REQ_CSPI2_RX 16
+#define MX21_DMA_REQ_CSPI2_TX 17
+#define MX21_DMA_REQ_CSPI1_RX 18
+#define MX21_DMA_REQ_CSPI1_TX 19
+#define MX21_DMA_REQ_UART4_RX 20
+#define MX21_DMA_REQ_UART4_TX 21
+#define MX21_DMA_REQ_UART3_RX 22
+#define MX21_DMA_REQ_UART3_TX 23
+#define MX21_DMA_REQ_UART2_RX 24
+#define MX21_DMA_REQ_UART2_TX 25
+#define MX21_DMA_REQ_UART1_RX 26
+#define MX21_DMA_REQ_UART1_TX 27
+#define MX21_DMA_REQ_BMI_TX 28
+#define MX21_DMA_REQ_BMI_RX 29
+#define MX21_DMA_REQ_CSI_STAT 30
+#define MX21_DMA_REQ_CSI_RX 31
+
+/* these should go away */
+#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
+#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX21_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX21_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX21_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX21_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX21_CS4_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX21_PCMCIA_MEM_BASE_ADDR
+#define CS5_BASE_ADDR MX21_CS5_BASE_ADDR
+#define X_MEMC_BASE_ADDR MX21_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX21_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX21_X_MEMC_SIZE
+#define SDRAMC_BASE_ADDR MX21_SDRAMC_BASE_ADDR
+#define EIM_BASE_ADDR MX21_EIM_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX21_PCMCIA_CTL_BASE_ADDR
+#define NFC_BASE_ADDR MX21_NFC_BASE_ADDR
+#define IRAM_BASE_ADDR MX21_IRAM_BASE_ADDR
+#define MXC_INT_FIRI MX21_INT_FIRI
+#define MXC_INT_BMI MX21_INT_BMI
+#define MXC_INT_EMMAENC MX21_INT_EMMAENC
+#define MXC_INT_EMMADEC MX21_INT_EMMADEC
+#define MXC_INT_USBWKUP MX21_INT_USBWKUP
+#define MXC_INT_USBDMA MX21_INT_USBDMA
+#define MXC_INT_USBHOST MX21_INT_USBHOST
+#define MXC_INT_USBFUNC MX21_INT_USBFUNC
+#define MXC_INT_USBMNP MX21_INT_USBMNP
+#define MXC_INT_USBCTRL MX21_INT_USBCTRL
+#define MXC_INT_USBCTRL MX21_INT_USBCTRL
+#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
+#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
+#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
#endif /* __ASM_ARCH_MXC_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index ec64bd9..91e7381 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -1,14 +1,14 @@
#ifndef __MACH_MX25_H__
#define __MACH_MX25_H__
-#define MX25_AIPS1_BASE_ADDR 0x43F00000
-#define MX25_AIPS1_BASE_ADDR_VIRT 0xFC000000
+#define MX25_AIPS1_BASE_ADDR 0x43f00000
+#define MX25_AIPS1_BASE_ADDR_VIRT 0xfc000000
#define MX25_AIPS1_SIZE SZ_1M
-#define MX25_AIPS2_BASE_ADDR 0x53F00000
-#define MX25_AIPS2_BASE_ADDR_VIRT 0xFC200000
+#define MX25_AIPS2_BASE_ADDR 0x53f00000
+#define MX25_AIPS2_BASE_ADDR_VIRT 0xfc200000
#define MX25_AIPS2_SIZE SZ_1M
#define MX25_AVIC_BASE_ADDR 0x68000000
-#define MX25_AVIC_BASE_ADDR_VIRT 0xFC400000
+#define MX25_AVIC_BASE_ADDR_VIRT 0xfc400000
#define MX25_AVIC_SIZE SZ_1M
#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000)
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index dc3ad9a..e2ae19f 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,87 +24,198 @@
#ifndef __ASM_ARCH_MXC_MX27_H__
#define __ASM_ARCH_MXC_MX27_H__
-/* IRAM */
-#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */
+#define MX27_AIPI_BASE_ADDR 0x10000000
+#define MX27_AIPI_BASE_ADDR_VIRT 0xf4000000
+#define MX27_AIPI_SIZE SZ_1M
+#define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000)
+#define MX27_WDOG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x02000)
+#define MX27_GPT1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x03000)
+#define MX27_GPT2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x04000)
+#define MX27_GPT3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x05000)
+#define MX27_PWM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x06000)
+#define MX27_RTC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x07000)
+#define MX27_KPP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x08000)
+#define MX27_OWIRE_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x09000)
+#define MX27_UART1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0a000)
+#define MX27_UART2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0b000)
+#define MX27_UART3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0c000)
+#define MX27_UART4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0d000)
+#define MX27_CSPI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0e000)
+#define MX27_CSPI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x0f000)
+#define MX27_SSI1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x10000)
+#define MX27_SSI2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x11000)
+#define MX27_I2C_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_SDHC1_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x13000)
+#define MX27_SDHC2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x14000)
+#define MX27_GPIO_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x15000)
+#define MX27_AUDMUX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x16000)
+#define MX27_CSPI3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x17000)
+#define MX27_MSHC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x18000)
+#define MX27_GPT5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x19000)
+#define MX27_GPT4_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1a000)
+#define MX27_UART5_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1b000)
+#define MX27_UART6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1c000)
+#define MX27_I2C2_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1d000)
+#define MX27_SDHC3_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1e000)
+#define MX27_GPT6_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x1f000)
+#define MX27_LCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x21000)
+#define MX27_SLCDC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x22000)
+#define MX27_VPU_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x23000)
+#define MX27_USBOTG_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x24000)
+#define MX27_OTG_BASE_ADDR MX27_USBOTG_BASE_ADDR
+#define MX27_SAHARA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x25000)
+#define MX27_EMMA_PP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26000)
+#define MX27_EMMA_PRP_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x26400)
+#define MX27_CCM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27000)
+#define MX27_SYSCTRL_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x27800)
+#define MX27_IIM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x28000)
+#define MX27_RTIC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2a000)
+#define MX27_FEC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2b000)
+#define MX27_SCC_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x2c000)
+#define MX27_ETB_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3b000)
+#define MX27_ETB_RAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3c000)
+#define MX27_JAM_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3e000)
+#define MX27_MAX_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x3f000)
-#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000)
-#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000)
-#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000)
-#define UART5_BASE_ADDR (AIPI_BASE_ADDR + 0x1B000)
-#define UART6_BASE_ADDR (AIPI_BASE_ADDR + 0x1C000)
-#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000)
-#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000)
-#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000)
-#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000)
-#define OTG_BASE_ADDR USBOTG_BASE_ADDR
-#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000)
-#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000)
-#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000)
-#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000)
-#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000)
-#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000)
-#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000)
+#define MX27_AVIC_BASE_ADDR 0x10040000
/* ROM patch */
-#define ROMP_BASE_ADDR 0x10041000
+#define MX27_ROMP_BASE_ADDR 0x10041000
-#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000)
+#define MX27_SAHB1_BASE_ADDR 0x80000000
+#define MX27_SAHB1_BASE_ADDR_VIRT 0xf4100000
+#define MX27_SAHB1_SIZE SZ_1M
+#define MX27_CSI_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x0000)
+#define MX27_ATA_BASE_ADDR (MX27_SAHB1_BASE_ADDR + 0x1000)
/* Memory regions and CS */
-#define SDRAM_BASE_ADDR 0xA0000000
-#define CSD1_BASE_ADDR 0xB0000000
+#define MX27_SDRAM_BASE_ADDR 0xa0000000
+#define MX27_CSD1_BASE_ADDR 0xb0000000
-#define CS0_BASE_ADDR 0xC0000000
-#define CS1_BASE_ADDR 0xC8000000
-#define CS2_BASE_ADDR 0xD0000000
-#define CS3_BASE_ADDR 0xD2000000
-#define CS4_BASE_ADDR 0xD4000000
-#define CS5_BASE_ADDR 0xD6000000
-#define PCMCIA_MEM_BASE_ADDR 0xDC000000
+#define MX27_CS0_BASE_ADDR 0xc0000000
+#define MX27_CS1_BASE_ADDR 0xc8000000
+#define MX27_CS2_BASE_ADDR 0xd0000000
+#define MX27_CS3_BASE_ADDR 0xd2000000
+#define MX27_CS4_BASE_ADDR 0xd4000000
+#define MX27_CS5_BASE_ADDR 0xd6000000
/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
-#define X_MEMC_BASE_ADDR 0xD8000000
-#define X_MEMC_BASE_ADDR_VIRT 0xF4200000
-#define X_MEMC_SIZE SZ_1M
+#define MX27_X_MEMC_BASE_ADDR 0xd8000000
+#define MX27_X_MEMC_BASE_ADDR_VIRT 0xf4200000
+#define MX27_X_MEMC_SIZE SZ_1M
+#define MX27_NFC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR)
+#define MX27_SDRAMC_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x1000)
+#define MX27_WEIM_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x2000)
+#define MX27_M3IF_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x3000)
+#define MX27_PCMCIA_CTL_BASE_ADDR (MX27_X_MEMC_BASE_ADDR + 0x4000)
-#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR)
-#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
-#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
+#define MX27_PCMCIA_MEM_BASE_ADDR 0xdc000000
+
+/* IRAM */
+#define MX27_IRAM_BASE_ADDR 0xffff4c00 /* internal ram */
/* fixed interrupt numbers */
-#define MXC_INT_CCM 63
-#define MXC_INT_IIM 62
-#define MXC_INT_SAHARA 59
-#define MXC_INT_SCC_SCM 58
-#define MXC_INT_SCC_SMN 57
-#define MXC_INT_USB3 56
-#define MXC_INT_USB2 55
-#define MXC_INT_USB1 54
-#define MXC_INT_VPU 53
-#define MXC_INT_FEC 50
-#define MXC_INT_UART5 49
-#define MXC_INT_UART6 48
-#define MXC_INT_ATA 30
-#define MXC_INT_SDHC3 9
-#define MXC_INT_SDHC 7
-#define MXC_INT_RTIC 5
-#define MXC_INT_GPT4 4
-#define MXC_INT_GPT5 3
-#define MXC_INT_GPT6 2
-#define MXC_INT_I2C2 1
+#define MX27_INT_I2C2 1
+#define MX27_INT_GPT6 2
+#define MX27_INT_GPT5 3
+#define MX27_INT_GPT4 4
+#define MX27_INT_RTIC 5
+#define MX27_INT_CSPI3 6
+#define MX27_INT_SDHC 7
+#define MX27_INT_GPIO 8
+#define MX27_INT_SDHC3 9
+#define MX27_INT_SDHC2 10
+#define MX27_INT_SDHC1 11
+#define MX27_INT_I2C 12
+#define MX27_INT_SSI2 13
+#define MX27_INT_SSI1 14
+#define MX27_INT_CSPI2 15
+#define MX27_INT_CSPI1 16
+#define MX27_INT_UART4 17
+#define MX27_INT_UART3 18
+#define MX27_INT_UART2 19
+#define MX27_INT_UART1 20
+#define MX27_INT_KPP 21
+#define MX27_INT_RTC 22
+#define MX27_INT_PWM 23
+#define MX27_INT_GPT3 24
+#define MX27_INT_GPT2 25
+#define MX27_INT_GPT1 26
+#define MX27_INT_WDOG 27
+#define MX27_INT_PCMCIA 28
+#define MX27_INT_NANDFC 29
+#define MX27_INT_ATA 30
+#define MX27_INT_CSI 31
+#define MX27_INT_DMACH0 32
+#define MX27_INT_DMACH1 33
+#define MX27_INT_DMACH2 34
+#define MX27_INT_DMACH3 35
+#define MX27_INT_DMACH4 36
+#define MX27_INT_DMACH5 37
+#define MX27_INT_DMACH6 38
+#define MX27_INT_DMACH7 39
+#define MX27_INT_DMACH8 40
+#define MX27_INT_DMACH9 41
+#define MX27_INT_DMACH10 42
+#define MX27_INT_DMACH11 43
+#define MX27_INT_DMACH12 44
+#define MX27_INT_DMACH13 45
+#define MX27_INT_DMACH14 46
+#define MX27_INT_DMACH15 47
+#define MX27_INT_UART6 48
+#define MX27_INT_UART5 49
+#define MX27_INT_FEC 50
+#define MX27_INT_EMMAPRP 51
+#define MX27_INT_EMMAPP 52
+#define MX27_INT_VPU 53
+#define MX27_INT_USB1 54
+#define MX27_INT_USB2 55
+#define MX27_INT_USB3 56
+#define MX27_INT_SCC_SMN 57
+#define MX27_INT_SCC_SCM 58
+#define MX27_INT_SAHARA 59
+#define MX27_INT_SLCDC 60
+#define MX27_INT_LCDC 61
+#define MX27_INT_IIM 62
+#define MX27_INT_CCM 63
/* fixed DMA request numbers */
-#define DMA_REQ_NFC 37
-#define DMA_REQ_SDHC3 36
-#define DMA_REQ_UART6_RX 35
-#define DMA_REQ_UART6_TX 34
-#define DMA_REQ_UART5_RX 33
-#define DMA_REQ_UART5_TX 32
-#define DMA_REQ_ATA_RCV 29
-#define DMA_REQ_ATA_TX 28
-#define DMA_REQ_MSHC 4
+#define MX27_DMA_REQ_CSPI3_RX 1
+#define MX27_DMA_REQ_CSPI3_TX 2
+#define MX27_DMA_REQ_EXT 3
+#define MX27_DMA_REQ_MSHC 4
+#define MX27_DMA_REQ_SDHC2 6
+#define MX27_DMA_REQ_SDHC1 7
+#define MX27_DMA_REQ_SSI2_RX0 8
+#define MX27_DMA_REQ_SSI2_TX0 9
+#define MX27_DMA_REQ_SSI2_RX1 10
+#define MX27_DMA_REQ_SSI2_TX1 11
+#define MX27_DMA_REQ_SSI1_RX0 12
+#define MX27_DMA_REQ_SSI1_TX0 13
+#define MX27_DMA_REQ_SSI1_RX1 14
+#define MX27_DMA_REQ_SSI1_TX1 15
+#define MX27_DMA_REQ_CSPI2_RX 16
+#define MX27_DMA_REQ_CSPI2_TX 17
+#define MX27_DMA_REQ_CSPI1_RX 18
+#define MX27_DMA_REQ_CSPI1_TX 19
+#define MX27_DMA_REQ_UART4_RX 20
+#define MX27_DMA_REQ_UART4_TX 21
+#define MX27_DMA_REQ_UART3_RX 22
+#define MX27_DMA_REQ_UART3_TX 23
+#define MX27_DMA_REQ_UART2_RX 24
+#define MX27_DMA_REQ_UART2_TX 25
+#define MX27_DMA_REQ_UART1_RX 26
+#define MX27_DMA_REQ_UART1_TX 27
+#define MX27_DMA_REQ_ATA_TX 28
+#define MX27_DMA_REQ_ATA_RCV 29
+#define MX27_DMA_REQ_CSI_STAT 30
+#define MX27_DMA_REQ_CSI_RX 31
+#define MX27_DMA_REQ_UART5_TX 32
+#define MX27_DMA_REQ_UART5_RX 33
+#define MX27_DMA_REQ_UART6_TX 34
+#define MX27_DMA_REQ_UART6_RX 35
+#define MX27_DMA_REQ_SDHC3 36
+#define MX27_DMA_REQ_NFC 37
/* silicon revisions specific to i.MX27 */
#define CHIP_REV_1_0 0x00
@@ -114,6 +225,72 @@
extern int mx27_revision(void);
#endif
-/* Mandatory defines used globally */
+/* these should go away */
+#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
+#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
+#define GPT4_BASE_ADDR MX27_GPT4_BASE_ADDR
+#define UART5_BASE_ADDR MX27_UART5_BASE_ADDR
+#define UART6_BASE_ADDR MX27_UART6_BASE_ADDR
+#define I2C2_BASE_ADDR MX27_I2C2_BASE_ADDR
+#define SDHC3_BASE_ADDR MX27_SDHC3_BASE_ADDR
+#define GPT6_BASE_ADDR MX27_GPT6_BASE_ADDR
+#define VPU_BASE_ADDR MX27_VPU_BASE_ADDR
+#define OTG_BASE_ADDR MX27_OTG_BASE_ADDR
+#define SAHARA_BASE_ADDR MX27_SAHARA_BASE_ADDR
+#define IIM_BASE_ADDR MX27_IIM_BASE_ADDR
+#define RTIC_BASE_ADDR MX27_RTIC_BASE_ADDR
+#define FEC_BASE_ADDR MX27_FEC_BASE_ADDR
+#define SCC_BASE_ADDR MX27_SCC_BASE_ADDR
+#define ETB_BASE_ADDR MX27_ETB_BASE_ADDR
+#define ETB_RAM_BASE_ADDR MX27_ETB_RAM_BASE_ADDR
+#define ROMP_BASE_ADDR MX27_ROMP_BASE_ADDR
+#define ATA_BASE_ADDR MX27_ATA_BASE_ADDR
+#define SDRAM_BASE_ADDR MX27_SDRAM_BASE_ADDR
+#define CSD1_BASE_ADDR MX27_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX27_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX27_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX27_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX27_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX27_CS4_BASE_ADDR
+#define CS5_BASE_ADDR MX27_CS5_BASE_ADDR
+#define X_MEMC_BASE_ADDR MX27_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX27_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX27_X_MEMC_SIZE
+#define NFC_BASE_ADDR MX27_NFC_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX27_SDRAMC_BASE_ADDR
+#define WEIM_BASE_ADDR MX27_WEIM_BASE_ADDR
+#define M3IF_BASE_ADDR MX27_M3IF_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX27_PCMCIA_CTL_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX27_PCMCIA_MEM_BASE_ADDR
+#define IRAM_BASE_ADDR MX27_IRAM_BASE_ADDR
+#define MXC_INT_I2C2 MX27_INT_I2C2
+#define MXC_INT_GPT6 MX27_INT_GPT6
+#define MXC_INT_GPT5 MX27_INT_GPT5
+#define MXC_INT_GPT4 MX27_INT_GPT4
+#define MXC_INT_RTIC MX27_INT_RTIC
+#define MXC_INT_SDHC MX27_INT_SDHC
+#define MXC_INT_SDHC3 MX27_INT_SDHC3
+#define MXC_INT_ATA MX27_INT_ATA
+#define MXC_INT_UART6 MX27_INT_UART6
+#define MXC_INT_UART5 MX27_INT_UART5
+#define MXC_INT_FEC MX27_INT_FEC
+#define MXC_INT_VPU MX27_INT_VPU
+#define MXC_INT_USB1 MX27_INT_USB1
+#define MXC_INT_USB2 MX27_INT_USB2
+#define MXC_INT_USB3 MX27_INT_USB3
+#define MXC_INT_SCC_SMN MX27_INT_SCC_SMN
+#define MXC_INT_SCC_SCM MX27_INT_SCC_SCM
+#define MXC_INT_SAHARA MX27_INT_SAHARA
+#define MXC_INT_IIM MX27_INT_IIM
+#define MXC_INT_CCM MX27_INT_CCM
+#define DMA_REQ_MSHC MX27_DMA_REQ_MSHC
+#define DMA_REQ_ATA_TX MX27_DMA_REQ_ATA_TX
+#define DMA_REQ_ATA_RCV MX27_DMA_REQ_ATA_RCV
+#define DMA_REQ_UART5_TX MX27_DMA_REQ_UART5_TX
+#define DMA_REQ_UART5_RX MX27_DMA_REQ_UART5_RX
+#define DMA_REQ_UART6_TX MX27_DMA_REQ_UART6_TX
+#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
+#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
+#define DMA_REQ_NFC MX27_DMA_REQ_NFC
#endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index db5d921..f2eaf14 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -25,51 +25,49 @@
/* The following addresses are common between i.MX21 and i.MX27 */
-/* Register offests */
-#define AIPI_BASE_ADDR 0x10000000
-#define AIPI_BASE_ADDR_VIRT 0xF4000000
-#define AIPI_SIZE SZ_1M
+/* Register offsets */
+#define MX2x_AIPI_BASE_ADDR 0x10000000
+#define MX2x_AIPI_BASE_ADDR_VIRT 0xf4000000
+#define MX2x_AIPI_SIZE SZ_1M
+#define MX2x_DMA_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x01000)
+#define MX2x_WDOG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x02000)
+#define MX2x_GPT1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x03000)
+#define MX2x_GPT2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x04000)
+#define MX2x_GPT3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x05000)
+#define MX2x_PWM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x06000)
+#define MX2x_RTC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x07000)
+#define MX2x_KPP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x08000)
+#define MX2x_OWIRE_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x09000)
+#define MX2x_UART1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0a000)
+#define MX2x_UART2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0b000)
+#define MX2x_UART3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0c000)
+#define MX2x_UART4_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0d000)
+#define MX2x_CSPI1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0e000)
+#define MX2x_CSPI2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x0f000)
+#define MX2x_SSI1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x10000)
+#define MX2x_SSI2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x11000)
+#define MX2x_I2C_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x12000)
+#define MX2x_SDHC1_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x13000)
+#define MX2x_SDHC2_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x14000)
+#define MX2x_GPIO_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x15000)
+#define MX2x_AUDMUX_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x16000)
+#define MX2x_CSPI3_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x17000)
+#define MX2x_LCDC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x21000)
+#define MX2x_SLCDC_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x22000)
+#define MX2x_USBOTG_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x24000)
+#define MX2x_EMMA_PP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x26000)
+#define MX2x_EMMA_PRP_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x26400)
+#define MX2x_CCM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x27000)
+#define MX2x_SYSCTRL_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x27800)
+#define MX2x_JAM_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x3e000)
+#define MX2x_MAX_BASE_ADDR (MX2x_AIPI_BASE_ADDR + 0x3f000)
-#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000)
-#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000)
-#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000)
-#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000)
-#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000)
-#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000)
-#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000)
-#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000)
-#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000)
-#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000)
-#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000)
-#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000)
-#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000)
-#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000)
-#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000)
-#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000)
-#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000)
-#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000)
-#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000)
-#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000)
-#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000)
-#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000)
-#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000)
-#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000)
-#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000)
-#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000)
-#define EMMA_PP_BASE_ADDR (AIPI_BASE_ADDR + 0x26000)
-#define EMMA_PRP_BASE_ADDR (AIPI_BASE_ADDR + 0x26400)
-#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000)
-#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800)
-#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000)
-#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000)
+#define MX2x_AVIC_BASE_ADDR 0x10040000
-#define AVIC_BASE_ADDR 0x10040000
-
-#define SAHB1_BASE_ADDR 0x80000000
-#define SAHB1_BASE_ADDR_VIRT 0xF4100000
-#define SAHB1_SIZE SZ_1M
-
-#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000)
+#define MX2x_SAHB1_BASE_ADDR 0x80000000
+#define MX2x_SAHB1_BASE_ADDR_VIRT 0xf4100000
+#define MX2x_SAHB1_SIZE SZ_1M
+#define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000)
/*
* This macro defines the physical to virtual address mapping for all the
@@ -105,78 +103,189 @@
(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
/* fixed interrupt numbers */
-#define MXC_INT_LCDC 61
-#define MXC_INT_SLCDC 60
-#define MXC_INT_EMMAPP 52
-#define MXC_INT_EMMAPRP 51
-#define MXC_INT_DMACH15 47
-#define MXC_INT_DMACH14 46
-#define MXC_INT_DMACH13 45
-#define MXC_INT_DMACH12 44
-#define MXC_INT_DMACH11 43
-#define MXC_INT_DMACH10 42
-#define MXC_INT_DMACH9 41
-#define MXC_INT_DMACH8 40
-#define MXC_INT_DMACH7 39
-#define MXC_INT_DMACH6 38
-#define MXC_INT_DMACH5 37
-#define MXC_INT_DMACH4 36
-#define MXC_INT_DMACH3 35
-#define MXC_INT_DMACH2 34
-#define MXC_INT_DMACH1 33
-#define MXC_INT_DMACH0 32
-#define MXC_INT_CSI 31
-#define MXC_INT_NANDFC 29
-#define MXC_INT_PCMCIA 28
-#define MXC_INT_WDOG 27
-#define MXC_INT_GPT1 26
-#define MXC_INT_GPT2 25
-#define MXC_INT_GPT3 24
-#define MXC_INT_GPT INT_GPT1
-#define MXC_INT_PWM 23
-#define MXC_INT_RTC 22
-#define MXC_INT_KPP 21
-#define MXC_INT_UART1 20
-#define MXC_INT_UART2 19
-#define MXC_INT_UART3 18
-#define MXC_INT_UART4 17
-#define MXC_INT_CSPI1 16
-#define MXC_INT_CSPI2 15
-#define MXC_INT_SSI1 14
-#define MXC_INT_SSI2 13
-#define MXC_INT_I2C 12
-#define MXC_INT_SDHC1 11
-#define MXC_INT_SDHC2 10
-#define MXC_INT_GPIO 8
-#define MXC_INT_CSPI3 6
+#define MX2x_INT_CSPI3 6
+#define MX2x_INT_GPIO 8
+#define MX2x_INT_SDHC2 10
+#define MX2x_INT_SDHC1 11
+#define MX2x_INT_I2C 12
+#define MX2x_INT_SSI2 13
+#define MX2x_INT_SSI1 14
+#define MX2x_INT_CSPI2 15
+#define MX2x_INT_CSPI1 16
+#define MX2x_INT_UART4 17
+#define MX2x_INT_UART3 18
+#define MX2x_INT_UART2 19
+#define MX2x_INT_UART1 20
+#define MX2x_INT_KPP 21
+#define MX2x_INT_RTC 22
+#define MX2x_INT_PWM 23
+#define MX2x_INT_GPT3 24
+#define MX2x_INT_GPT2 25
+#define MX2x_INT_GPT1 26
+#define MX2x_INT_WDOG 27
+#define MX2x_INT_PCMCIA 28
+#define MX2x_INT_NANDFC 29
+#define MX2x_INT_CSI 31
+#define MX2x_INT_DMACH0 32
+#define MX2x_INT_DMACH1 33
+#define MX2x_INT_DMACH2 34
+#define MX2x_INT_DMACH3 35
+#define MX2x_INT_DMACH4 36
+#define MX2x_INT_DMACH5 37
+#define MX2x_INT_DMACH6 38
+#define MX2x_INT_DMACH7 39
+#define MX2x_INT_DMACH8 40
+#define MX2x_INT_DMACH9 41
+#define MX2x_INT_DMACH10 42
+#define MX2x_INT_DMACH11 43
+#define MX2x_INT_DMACH12 44
+#define MX2x_INT_DMACH13 45
+#define MX2x_INT_DMACH14 46
+#define MX2x_INT_DMACH15 47
+#define MX2x_INT_EMMAPRP 51
+#define MX2x_INT_EMMAPP 52
+#define MX2x_INT_SLCDC 60
+#define MX2x_INT_LCDC 61
/* fixed DMA request numbers */
-#define DMA_REQ_CSI_RX 31
-#define DMA_REQ_CSI_STAT 30
-#define DMA_REQ_UART1_TX 27
-#define DMA_REQ_UART1_RX 26
-#define DMA_REQ_UART2_TX 25
-#define DMA_REQ_UART2_RX 24
-#define DMA_REQ_UART3_TX 23
-#define DMA_REQ_UART3_RX 22
-#define DMA_REQ_UART4_TX 21
-#define DMA_REQ_UART4_RX 20
-#define DMA_REQ_CSPI1_TX 19
-#define DMA_REQ_CSPI1_RX 18
-#define DMA_REQ_CSPI2_TX 17
-#define DMA_REQ_CSPI2_RX 16
-#define DMA_REQ_SSI1_TX1 15
-#define DMA_REQ_SSI1_RX1 14
-#define DMA_REQ_SSI1_TX0 13
-#define DMA_REQ_SSI1_RX0 12
-#define DMA_REQ_SSI2_TX1 11
-#define DMA_REQ_SSI2_RX1 10
-#define DMA_REQ_SSI2_TX0 9
-#define DMA_REQ_SSI2_RX0 8
-#define DMA_REQ_SDHC1 7
-#define DMA_REQ_SDHC2 6
-#define DMA_REQ_EXT 3
-#define DMA_REQ_CSPI3_TX 2
-#define DMA_REQ_CSPI3_RX 1
+#define MX2x_DMA_REQ_CSPI3_RX 1
+#define MX2x_DMA_REQ_CSPI3_TX 2
+#define MX2x_DMA_REQ_EXT 3
+#define MX2x_DMA_REQ_SDHC2 6
+#define MX2x_DMA_REQ_SDHC1 7
+#define MX2x_DMA_REQ_SSI2_RX0 8
+#define MX2x_DMA_REQ_SSI2_TX0 9
+#define MX2x_DMA_REQ_SSI2_RX1 10
+#define MX2x_DMA_REQ_SSI2_TX1 11
+#define MX2x_DMA_REQ_SSI1_RX0 12
+#define MX2x_DMA_REQ_SSI1_TX0 13
+#define MX2x_DMA_REQ_SSI1_RX1 14
+#define MX2x_DMA_REQ_SSI1_TX1 15
+#define MX2x_DMA_REQ_CSPI2_RX 16
+#define MX2x_DMA_REQ_CSPI2_TX 17
+#define MX2x_DMA_REQ_CSPI1_RX 18
+#define MX2x_DMA_REQ_CSPI1_TX 19
+#define MX2x_DMA_REQ_UART4_RX 20
+#define MX2x_DMA_REQ_UART4_TX 21
+#define MX2x_DMA_REQ_UART3_RX 22
+#define MX2x_DMA_REQ_UART3_TX 23
+#define MX2x_DMA_REQ_UART2_RX 24
+#define MX2x_DMA_REQ_UART2_TX 25
+#define MX2x_DMA_REQ_UART1_RX 26
+#define MX2x_DMA_REQ_UART1_TX 27
+#define MX2x_DMA_REQ_CSI_STAT 30
+#define MX2x_DMA_REQ_CSI_RX 31
+
+/* these should go away */
+#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
+#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
+#define AIPI_SIZE MX2x_AIPI_SIZE
+#define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR
+#define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR
+#define GPT1_BASE_ADDR MX2x_GPT1_BASE_ADDR
+#define GPT2_BASE_ADDR MX2x_GPT2_BASE_ADDR
+#define GPT3_BASE_ADDR MX2x_GPT3_BASE_ADDR
+#define PWM_BASE_ADDR MX2x_PWM_BASE_ADDR
+#define RTC_BASE_ADDR MX2x_RTC_BASE_ADDR
+#define KPP_BASE_ADDR MX2x_KPP_BASE_ADDR
+#define OWIRE_BASE_ADDR MX2x_OWIRE_BASE_ADDR
+#define UART1_BASE_ADDR MX2x_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX2x_UART2_BASE_ADDR
+#define UART3_BASE_ADDR MX2x_UART3_BASE_ADDR
+#define UART4_BASE_ADDR MX2x_UART4_BASE_ADDR
+#define CSPI1_BASE_ADDR MX2x_CSPI1_BASE_ADDR
+#define CSPI2_BASE_ADDR MX2x_CSPI2_BASE_ADDR
+#define SSI1_BASE_ADDR MX2x_SSI1_BASE_ADDR
+#define SSI2_BASE_ADDR MX2x_SSI2_BASE_ADDR
+#define I2C_BASE_ADDR MX2x_I2C_BASE_ADDR
+#define SDHC1_BASE_ADDR MX2x_SDHC1_BASE_ADDR
+#define SDHC2_BASE_ADDR MX2x_SDHC2_BASE_ADDR
+#define GPIO_BASE_ADDR MX2x_GPIO_BASE_ADDR
+#define AUDMUX_BASE_ADDR MX2x_AUDMUX_BASE_ADDR
+#define CSPI3_BASE_ADDR MX2x_CSPI3_BASE_ADDR
+#define LCDC_BASE_ADDR MX2x_LCDC_BASE_ADDR
+#define SLCDC_BASE_ADDR MX2x_SLCDC_BASE_ADDR
+#define USBOTG_BASE_ADDR MX2x_USBOTG_BASE_ADDR
+#define EMMA_PP_BASE_ADDR MX2x_EMMA_PP_BASE_ADDR
+#define EMMA_PRP_BASE_ADDR MX2x_EMMA_PRP_BASE_ADDR
+#define CCM_BASE_ADDR MX2x_CCM_BASE_ADDR
+#define SYSCTRL_BASE_ADDR MX2x_SYSCTRL_BASE_ADDR
+#define JAM_BASE_ADDR MX2x_JAM_BASE_ADDR
+#define MAX_BASE_ADDR MX2x_MAX_BASE_ADDR
+#define AVIC_BASE_ADDR MX2x_AVIC_BASE_ADDR
+#define SAHB1_BASE_ADDR MX2x_SAHB1_BASE_ADDR
+#define SAHB1_BASE_ADDR_VIRT MX2x_SAHB1_BASE_ADDR_VIRT
+#define SAHB1_SIZE MX2x_SAHB1_SIZE
+#define CSI_BASE_ADDR MX2x_CSI_BASE_ADDR
+#define MXC_INT_CSPI3 MX2x_INT_CSPI3
+#define MXC_INT_GPIO MX2x_INT_GPIO
+#define MXC_INT_SDHC2 MX2x_INT_SDHC2
+#define MXC_INT_SDHC1 MX2x_INT_SDHC1
+#define MXC_INT_I2C MX2x_INT_I2C
+#define MXC_INT_SSI2 MX2x_INT_SSI2
+#define MXC_INT_SSI1 MX2x_INT_SSI1
+#define MXC_INT_CSPI2 MX2x_INT_CSPI2
+#define MXC_INT_CSPI1 MX2x_INT_CSPI1
+#define MXC_INT_UART4 MX2x_INT_UART4
+#define MXC_INT_UART3 MX2x_INT_UART3
+#define MXC_INT_UART2 MX2x_INT_UART2
+#define MXC_INT_UART1 MX2x_INT_UART1
+#define MXC_INT_KPP MX2x_INT_KPP
+#define MXC_INT_RTC MX2x_INT_RTC
+#define MXC_INT_PWM MX2x_INT_PWM
+#define MXC_INT_GPT3 MX2x_INT_GPT3
+#define MXC_INT_GPT2 MX2x_INT_GPT2
+#define MXC_INT_GPT1 MX2x_INT_GPT1
+#define MXC_INT_WDOG MX2x_INT_WDOG
+#define MXC_INT_PCMCIA MX2x_INT_PCMCIA
+#define MXC_INT_NANDFC MX2x_INT_NANDFC
+#define MXC_INT_CSI MX2x_INT_CSI
+#define MXC_INT_DMACH0 MX2x_INT_DMACH0
+#define MXC_INT_DMACH1 MX2x_INT_DMACH1
+#define MXC_INT_DMACH2 MX2x_INT_DMACH2
+#define MXC_INT_DMACH3 MX2x_INT_DMACH3
+#define MXC_INT_DMACH4 MX2x_INT_DMACH4
+#define MXC_INT_DMACH5 MX2x_INT_DMACH5
+#define MXC_INT_DMACH6 MX2x_INT_DMACH6
+#define MXC_INT_DMACH7 MX2x_INT_DMACH7
+#define MXC_INT_DMACH8 MX2x_INT_DMACH8
+#define MXC_INT_DMACH9 MX2x_INT_DMACH9
+#define MXC_INT_DMACH10 MX2x_INT_DMACH10
+#define MXC_INT_DMACH11 MX2x_INT_DMACH11
+#define MXC_INT_DMACH12 MX2x_INT_DMACH12
+#define MXC_INT_DMACH13 MX2x_INT_DMACH13
+#define MXC_INT_DMACH14 MX2x_INT_DMACH14
+#define MXC_INT_DMACH15 MX2x_INT_DMACH15
+#define MXC_INT_EMMAPRP MX2x_INT_EMMAPRP
+#define MXC_INT_EMMAPP MX2x_INT_EMMAPP
+#define MXC_INT_SLCDC MX2x_INT_SLCDC
+#define MXC_INT_LCDC MX2x_INT_LCDC
+#define DMA_REQ_CSPI3_RX MX2x_DMA_REQ_CSPI3_RX
+#define DMA_REQ_CSPI3_TX MX2x_DMA_REQ_CSPI3_TX
+#define DMA_REQ_EXT MX2x_DMA_REQ_EXT
+#define DMA_REQ_SDHC2 MX2x_DMA_REQ_SDHC2
+#define DMA_REQ_SDHC1 MX2x_DMA_REQ_SDHC1
+#define DMA_REQ_SSI2_RX0 MX2x_DMA_REQ_SSI2_RX0
+#define DMA_REQ_SSI2_TX0 MX2x_DMA_REQ_SSI2_TX0
+#define DMA_REQ_SSI2_RX1 MX2x_DMA_REQ_SSI2_RX1
+#define DMA_REQ_SSI2_TX1 MX2x_DMA_REQ_SSI2_TX1
+#define DMA_REQ_SSI1_RX0 MX2x_DMA_REQ_SSI1_RX0
+#define DMA_REQ_SSI1_TX0 MX2x_DMA_REQ_SSI1_TX0
+#define DMA_REQ_SSI1_RX1 MX2x_DMA_REQ_SSI1_RX1
+#define DMA_REQ_SSI1_TX1 MX2x_DMA_REQ_SSI1_TX1
+#define DMA_REQ_CSPI2_RX MX2x_DMA_REQ_CSPI2_RX
+#define DMA_REQ_CSPI2_TX MX2x_DMA_REQ_CSPI2_TX
+#define DMA_REQ_CSPI1_RX MX2x_DMA_REQ_CSPI1_RX
+#define DMA_REQ_CSPI1_TX MX2x_DMA_REQ_CSPI1_TX
+#define DMA_REQ_UART4_RX MX2x_DMA_REQ_UART4_RX
+#define DMA_REQ_UART4_TX MX2x_DMA_REQ_UART4_TX
+#define DMA_REQ_UART3_RX MX2x_DMA_REQ_UART3_RX
+#define DMA_REQ_UART3_TX MX2x_DMA_REQ_UART3_TX
+#define DMA_REQ_UART2_RX MX2x_DMA_REQ_UART2_RX
+#define DMA_REQ_UART2_TX MX2x_DMA_REQ_UART2_TX
+#define DMA_REQ_UART1_RX MX2x_DMA_REQ_UART1_RX
+#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
+#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
#endif /* __ASM_ARCH_MXC_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 14ac0dc..b8b47d1 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,45 +1,218 @@
/*
* IRAM
*/
-#define MX31_IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */
+#define MX31_IRAM_BASE_ADDR 0x1ffc0000 /* internal ram */
#define MX31_IRAM_SIZE SZ_16K
-#define MX31_OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000)
-#define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000)
-#define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000)
-#define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000)
+#define MX31_L2CC_BASE_ADDR 0x30000000
+#define MX31_L2CC_SIZE SZ_1M
-#define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000)
-#define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000)
-#define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000)
-#define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000)
+#define MX31_AIPS1_BASE_ADDR 0x43f00000
+#define MX31_AIPS1_BASE_ADDR_VIRT 0xfc000000
+#define MX31_AIPS1_SIZE SZ_1M
+#define MX31_MAX_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x04000)
+#define MX31_EVTMON_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x08000)
+#define MX31_CLKCTL_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x0c000)
+#define MX31_ETB_SLOT4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x10000)
+#define MX31_ETB_SLOT5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x14000)
+#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000)
+#define MX31_I2C_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000)
+#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000)
+#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000)
+#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000)
+#define MX31_I2C2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x98000)
+#define MX31_OWIRE_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x9c000)
+#define MX31_SSI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa0000)
+#define MX31_CSPI1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa4000)
+#define MX31_KPP_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xa8000)
+#define MX31_IOMUXC_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xac000)
+#define MX31_UART4_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb0000)
+#define MX31_UART5_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb4000)
+#define MX31_ECT_IP1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xb8000)
+#define MX31_ECT_IP2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0xbc000)
-#define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000)
-#define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000)
-#define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000)
-#define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000)
-#define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000)
+#define MX31_SPBA0_BASE_ADDR 0x50000000
+#define MX31_SPBA0_BASE_ADDR_VIRT 0xfc100000
+#define MX31_SPBA0_SIZE SZ_1M
+#define MX31_MMC_SDHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x04000)
+#define MX31_MMC_SDHC2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x08000)
+#define MX31_UART3_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x0c000)
+#define MX31_CSPI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x10000)
+#define MX31_SSI2_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x14000)
+#define MX31_SIM1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x18000)
+#define MX31_IIM_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x1c000)
+#define MX31_ATA_DMA_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x20000)
+#define MX31_MSHC1_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x24000)
+#define MX31_SPBA_CTRL_BASE_ADDR (MX31_SPBA0_BASE_ADDR + 0x3c000)
-#define MX31_NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_AIPS2_BASE_ADDR 0x53f00000
+#define MX31_AIPS2_BASE_ADDR_VIRT 0xfc200000
+#define MX31_AIPS2_SIZE SZ_1M
+#define MX31_CCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x80000)
+#define MX31_CSPI3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x84000)
+#define MX31_FIRI_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x8c000)
+#define MX31_GPT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x90000)
+#define MX31_EPIT1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x94000)
+#define MX31_EPIT2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0x98000)
+#define MX31_GPIO3_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xa4000)
+#define MX31_SCC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xac000)
+#define MX31_SCM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xae000)
+#define MX31_SMN_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xaf000)
+#define MX31_RNGA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xb0000)
+#define MX31_IPU_CTRL_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc0000)
+#define MX31_AUDMUX_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc4000)
+#define MX31_MPEG4_ENC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xc8000)
+#define MX31_GPIO1_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xcc000)
+#define MX31_GPIO2_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd0000)
+#define MX31_SDMA_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd4000)
+#define MX31_RTC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xd8000)
+#define MX31_WDOG_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xdc000)
+#define MX31_PWM_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xe0000)
+#define MX31_RTIC_BASE_ADDR (MX31_AIPS2_BASE_ADDR + 0xec000)
-#define MXC_INT_MPEG4_ENCODER 5
-#define MXC_INT_FIRI 7
+#define MX31_ROMP_BASE_ADDR 0x60000000
+#define MX31_ROMP_BASE_ADDR_VIRT 0xfc500000
+#define MX31_ROMP_SIZE SZ_1M
+
+#define MX31_AVIC_BASE_ADDR 0x68000000
+#define MX31_AVIC_BASE_ADDR_VIRT 0xfc400000
+#define MX31_AVIC_SIZE SZ_1M
+
+#define MX31_IPU_MEM_BASE_ADDR 0x70000000
+#define MX31_CSD0_BASE_ADDR 0x80000000
+#define MX31_CSD1_BASE_ADDR 0x90000000
+
+#define MX31_CS0_BASE_ADDR 0xa0000000
+#define MX31_CS1_BASE_ADDR 0xa8000000
+#define MX31_CS2_BASE_ADDR 0xb0000000
+#define MX31_CS3_BASE_ADDR 0xb2000000
+
+#define MX31_CS4_BASE_ADDR 0xb4000000
+#define MX31_CS4_BASE_ADDR_VIRT 0xf4000000
+#define MX31_CS4_SIZE SZ_32M
+
+#define MX31_CS5_BASE_ADDR 0xb6000000
+#define MX31_CS5_BASE_ADDR_VIRT 0xf6000000
+#define MX31_CS5_SIZE SZ_32M
+
+#define MX31_X_MEMC_BASE_ADDR 0xb8000000
+#define MX31_X_MEMC_BASE_ADDR_VIRT 0xfc320000
+#define MX31_X_MEMC_SIZE SZ_64K
+#define MX31_NFC_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_ESDCTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x1000)
+#define MX31_WEIM_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x2000)
+#define MX31_M3IF_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x3000)
+#define MX31_EMI_CTL_BASE_ADDR (MX31_X_MEMC_BASE_ADDR + 0x4000)
+#define MX31_PCMCIA_CTL_BASE_ADDR MX31_EMI_CTL_BASE_ADDR
+
+#define MX31_PCMCIA_MEM_BASE_ADDR 0xbc000000
+
+#define MX31_INT_I2C3 3
+#define MX31_INT_I2C2 4
+#define MX31_INT_MPEG4_ENCODER 5
+#define MX31_INT_RTIC 6
+#define MX31_INT_FIRI 7
#define MX31_INT_MMC_SDHC2 8
-#define MXC_INT_MMC_SDHC1 9
+#define MX31_INT_MMC_SDHC1 9
+#define MX31_INT_I2C 10
#define MX31_INT_SSI2 11
#define MX31_INT_SSI1 12
-#define MXC_INT_MBX 16
-#define MXC_INT_CSPI3 17
-#define MXC_INT_SIM2 20
-#define MXC_INT_SIM1 21
-#define MXC_INT_CCM_DVFS 31
-#define MXC_INT_USB1 35
-#define MXC_INT_USB2 36
-#define MXC_INT_USB3 37
-#define MXC_INT_USB4 38
-#define MXC_INT_MSHC2 40
-#define MXC_INT_UART4 46
-#define MXC_INT_UART5 47
-#define MXC_INT_CCM 53
-#define MXC_INT_PCMCIA 54
+#define MX31_INT_CSPI2 13
+#define MX31_INT_CSPI1 14
+#define MX31_INT_ATA 15
+#define MX31_INT_MBX 16
+#define MX31_INT_CSPI3 17
+#define MX31_INT_UART3 18
+#define MX31_INT_IIM 19
+#define MX31_INT_SIM2 20
+#define MX31_INT_SIM1 21
+#define MX31_INT_RNGA 22
+#define MX31_INT_EVTMON 23
+#define MX31_INT_KPP 24
+#define MX31_INT_RTC 25
+#define MX31_INT_PWM 26
+#define MX31_INT_EPIT2 27
+#define MX31_INT_EPIT1 28
+#define MX31_INT_GPT 29
+#define MX31_INT_POWER_FAIL 30
+#define MX31_INT_CCM_DVFS 31
+#define MX31_INT_UART2 32
+#define MX31_INT_NANDFC 33
+#define MX31_INT_SDMA 34
+#define MX31_INT_USB1 35
+#define MX31_INT_USB2 36
+#define MX31_INT_USB3 37
+#define MX31_INT_USB4 38
+#define MX31_INT_MSHC1 39
+#define MX31_INT_MSHC2 40
+#define MX31_INT_IPU_ERR 41
+#define MX31_INT_IPU_SYN 42
+#define MX31_INT_UART1 45
+#define MX31_INT_UART4 46
+#define MX31_INT_UART5 47
+#define MX31_INT_ECT 48
+#define MX31_INT_SCC_SCM 49
+#define MX31_INT_SCC_SMN 50
+#define MX31_INT_GPIO2 51
+#define MX31_INT_GPIO1 52
+#define MX31_INT_CCM 53
+#define MX31_INT_PCMCIA 54
+#define MX31_INT_WDOG 55
+#define MX31_INT_GPIO3 56
+#define MX31_INT_EXT_POWER 58
+#define MX31_INT_EXT_TEMPER 59
+#define MX31_INT_EXT_SENSOR60 60
+#define MX31_INT_EXT_SENSOR61 61
+#define MX31_INT_EXT_WDOG 62
+#define MX31_INT_EXT_TV 63
+#define MX31_PROD_SIGNATURE 0x1 /* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define MX31_CHIP_REV_1_0 0x10
+#define MX31_CHIP_REV_1_1 0x11
+#define MX31_CHIP_REV_1_2 0x12
+#define MX31_CHIP_REV_1_3 0x13
+#define MX31_CHIP_REV_2_0 0x20
+#define MX31_CHIP_REV_2_1 0x21
+#define MX31_CHIP_REV_2_2 0x22
+#define MX31_CHIP_REV_2_3 0x23
+#define MX31_CHIP_REV_3_0 0x30
+#define MX31_CHIP_REV_3_1 0x31
+#define MX31_CHIP_REV_3_2 0x32
+
+#define MX31_SYSTEM_REV_MIN MX31_CHIP_REV_1_0
+#define MX31_SYSTEM_REV_NUM 3
+
+/* these should go away */
+#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
+#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
+#define UART5_BASE_ADDR MX31_UART5_BASE_ADDR
+#define MMC_SDHC1_BASE_ADDR MX31_MMC_SDHC1_BASE_ADDR
+#define MMC_SDHC2_BASE_ADDR MX31_MMC_SDHC2_BASE_ADDR
+#define SIM1_BASE_ADDR MX31_SIM1_BASE_ADDR
+#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR
+#define CSPI3_BASE_ADDR MX31_CSPI3_BASE_ADDR
+#define FIRI_BASE_ADDR MX31_FIRI_BASE_ADDR
+#define SCM_BASE_ADDR MX31_SCM_BASE_ADDR
+#define SMN_BASE_ADDR MX31_SMN_BASE_ADDR
+#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR
+#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER
+#define MXC_INT_FIRI MX31_INT_FIRI
+#define MXC_INT_MMC_SDHC1 MX31_INT_MMC_SDHC1
+#define MXC_INT_MBX MX31_INT_MBX
+#define MXC_INT_CSPI3 MX31_INT_CSPI3
+#define MXC_INT_SIM2 MX31_INT_SIM2
+#define MXC_INT_SIM1 MX31_INT_SIM1
+#define MXC_INT_CCM_DVFS MX31_INT_CCM_DVFS
+#define MXC_INT_USB1 MX31_INT_USB1
+#define MXC_INT_USB2 MX31_INT_USB2
+#define MXC_INT_USB3 MX31_INT_USB3
+#define MXC_INT_USB4 MX31_INT_USB4
+#define MXC_INT_MSHC2 MX31_INT_MSHC2
+#define MXC_INT_UART4 MX31_INT_UART4
+#define MXC_INT_UART5 MX31_INT_UART5
+#define MXC_INT_CCM MX31_INT_CCM
+#define MXC_INT_PCMCIA MX31_INT_PCMCIA
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index ab4cfec..af871bc 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -2,29 +2,196 @@
* IRAM
*/
#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */
-#define MX35_IRAM_SIZE SZ_128K
+#define MX35_IRAM_SIZE SZ_128K
-#define MXC_FEC_BASE_ADDR 0x50038000
-#define MX35_OTG_BASE_ADDR 0x53ff4000
-#define MX35_NFC_BASE_ADDR 0xBB000000
+#define MX35_L2CC_BASE_ADDR 0x30000000
+#define MX35_L2CC_SIZE SZ_1M
+
+#define MX35_AIPS1_BASE_ADDR 0x43f00000
+#define MX35_AIPS1_BASE_ADDR_VIRT 0xfc000000
+#define MX35_AIPS1_SIZE SZ_1M
+#define MX35_MAX_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x04000)
+#define MX35_EVTMON_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x08000)
+#define MX35_CLKCTL_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x0c000)
+#define MX35_ETB_SLOT4_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x10000)
+#define MX35_ETB_SLOT5_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x14000)
+#define MX35_ECT_CTIO_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x18000)
+#define MX35_I2C_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C3_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x84000)
+#define MX35_UART1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x90000)
+#define MX35_UART2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x94000)
+#define MX35_I2C2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x98000)
+#define MX35_OWIRE_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0x9c000)
+#define MX35_SSI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa0000)
+#define MX35_CSPI1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa4000)
+#define MX35_KPP_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xa8000)
+#define MX35_IOMUXC_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xac000)
+#define MX35_ECT_IP1_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xb8000)
+#define MX35_ECT_IP2_BASE_ADDR (MX35_AIPS1_BASE_ADDR + 0xbc000)
+
+#define MX35_SPBA0_BASE_ADDR 0x50000000
+#define MX35_SPBA0_BASE_ADDR_VIRT 0xfc100000
+#define MX35_SPBA0_SIZE SZ_1M
+#define MX35_UART3_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x0c000)
+#define MX35_CSPI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x10000)
+#define MX35_SSI2_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x14000)
+#define MX35_ATA_DMA_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x20000)
+#define MX35_MSHC1_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x24000)
+#define MX35_FEC_BASE_ADDR 0x50038000
+#define MX35_SPBA_CTRL_BASE_ADDR (MX35_SPBA0_BASE_ADDR + 0x3c000)
+
+#define MX35_AIPS2_BASE_ADDR 0x53f00000
+#define MX35_AIPS2_BASE_ADDR_VIRT 0xfc200000
+#define MX35_AIPS2_SIZE SZ_1M
+#define MX35_CCM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x80000)
+#define MX35_GPT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x90000)
+#define MX35_EPIT1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x94000)
+#define MX35_EPIT2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0x98000)
+#define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000)
+#define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000)
+#define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000)
+#define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000)
+#define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000)
+#define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000)
+#define MX35_GPIO2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd0000)
+#define MX35_SDMA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd4000)
+#define MX35_RTC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xd8000)
+#define MX35_WDOG_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xdc000)
+#define MX35_PWM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe0000)
+#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000)
+#define MX35_OTG_BASE_ADDR 0x53ff4000
+
+#define MX35_ROMP_BASE_ADDR 0x60000000
+#define MX35_ROMP_BASE_ADDR_VIRT 0xfc500000
+#define MX35_ROMP_SIZE SZ_1M
+
+#define MX35_AVIC_BASE_ADDR 0x68000000
+#define MX35_AVIC_BASE_ADDR_VIRT 0xfc400000
+#define MX35_AVIC_SIZE SZ_1M
+
+/*
+ * Memory regions and CS
+ */
+#define MX35_IPU_MEM_BASE_ADDR 0x70000000
+#define MX35_CSD0_BASE_ADDR 0x80000000
+#define MX35_CSD1_BASE_ADDR 0x90000000
+
+#define MX35_CS0_BASE_ADDR 0xa0000000
+#define MX35_CS1_BASE_ADDR 0xa8000000
+#define MX35_CS2_BASE_ADDR 0xb0000000
+#define MX35_CS3_BASE_ADDR 0xb2000000
+
+#define MX35_CS4_BASE_ADDR 0xb4000000
+#define MX35_CS4_BASE_ADDR_VIRT 0xf4000000
+#define MX35_CS4_SIZE SZ_32M
+
+#define MX35_CS5_BASE_ADDR 0xb6000000
+#define MX35_CS5_BASE_ADDR_VIRT 0xf6000000
+#define MX35_CS5_SIZE SZ_32M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MX35_X_MEMC_BASE_ADDR 0xb8000000
+#define MX35_X_MEMC_BASE_ADDR_VIRT 0xfc320000
+#define MX35_X_MEMC_SIZE SZ_64K
+#define MX35_ESDCTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x1000)
+#define MX35_WEIM_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x2000)
+#define MX35_M3IF_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x3000)
+#define MX35_EMI_CTL_BASE_ADDR (MX35_X_MEMC_BASE_ADDR + 0x4000)
+#define MX35_PCMCIA_CTL_BASE_ADDR MX35_EMI_CTL_BASE_ADDR
+
+#define MX35_NFC_BASE_ADDR 0xbb000000
+#define MX35_PCMCIA_MEM_BASE_ADDR 0xbc000000
/*
* Interrupt numbers
*/
-#define MXC_INT_OWIRE 2
+#define MX35_INT_OWIRE 2
+#define MX35_INT_I2C3 3
+#define MX35_INT_I2C2 4
+#define MX35_INT_RTIC 6
#define MX35_INT_MMC_SDHC1 7
-#define MXC_INT_MMC_SDHC2 8
-#define MXC_INT_MMC_SDHC3 9
+#define MX35_INT_MMC_SDHC2 8
+#define MX35_INT_MMC_SDHC3 9
+#define MX35_INT_I2C 10
#define MX35_INT_SSI1 11
#define MX35_INT_SSI2 12
-#define MXC_INT_GPU2D 16
-#define MXC_INT_ASRC 17
-#define MXC_INT_USBHS 35
-#define MXC_INT_USBOTG 37
-#define MXC_INT_ESAI 40
-#define MXC_INT_CAN1 43
-#define MXC_INT_CAN2 44
-#define MXC_INT_MLB 46
-#define MXC_INT_SPDIF 47
-#define MXC_INT_FEC 57
+#define MX35_INT_CSPI2 13
+#define MX35_INT_CSPI1 14
+#define MX35_INT_ATA 15
+#define MX35_INT_GPU2D 16
+#define MX35_INT_ASRC 17
+#define MX35_INT_UART3 18
+#define MX35_INT_IIM 19
+#define MX35_INT_RNGA 22
+#define MX35_INT_EVTMON 23
+#define MX35_INT_KPP 24
+#define MX35_INT_RTC 25
+#define MX35_INT_PWM 26
+#define MX35_INT_EPIT2 27
+#define MX35_INT_EPIT1 28
+#define MX35_INT_GPT 29
+#define MX35_INT_POWER_FAIL 30
+#define MX35_INT_UART2 32
+#define MX35_INT_NANDFC 33
+#define MX35_INT_SDMA 34
+#define MX35_INT_USBHS 35
+#define MX35_INT_USBOTG 37
+#define MX35_INT_MSHC1 39
+#define MX35_INT_ESAI 40
+#define MX35_INT_IPU_ERR 41
+#define MX35_INT_IPU_SYN 42
+#define MX35_INT_CAN1 43
+#define MX35_INT_CAN2 44
+#define MX35_INT_UART1 45
+#define MX35_INT_MLB 46
+#define MX35_INT_SPDIF 47
+#define MX35_INT_ECT 48
+#define MX35_INT_SCC_SCM 49
+#define MX35_INT_SCC_SMN 50
+#define MX35_INT_GPIO2 51
+#define MX35_INT_GPIO1 52
+#define MX35_INT_WDOG 55
+#define MX35_INT_GPIO3 56
+#define MX35_INT_FEC 57
+#define MX35_INT_EXT_POWER 58
+#define MX35_INT_EXT_TEMPER 59
+#define MX35_INT_EXT_SENSOR60 60
+#define MX35_INT_EXT_SENSOR61 61
+#define MX35_INT_EXT_WDOG 62
+#define MX35_INT_EXT_TV 63
+#define MX35_PROD_SIGNATURE 0x1 /* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define MX35_CHIP_REV_1_0 0x10
+#define MX35_CHIP_REV_1_1 0x11
+#define MX35_CHIP_REV_1_2 0x12
+#define MX35_CHIP_REV_1_3 0x13
+#define MX35_CHIP_REV_2_0 0x20
+#define MX35_CHIP_REV_2_1 0x21
+#define MX35_CHIP_REV_2_2 0x22
+#define MX35_CHIP_REV_2_3 0x23
+#define MX35_CHIP_REV_3_0 0x30
+#define MX35_CHIP_REV_3_1 0x31
+#define MX35_CHIP_REV_3_2 0x32
+
+#define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0
+#define MX35_SYSTEM_REV_NUM 3
+
+/* these should go away */
+#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
+#define MXC_INT_OWIRE MX35_INT_OWIRE
+#define MXC_INT_MMC_SDHC2 MX35_INT_MMC_SDHC2
+#define MXC_INT_MMC_SDHC3 MX35_INT_MMC_SDHC3
+#define MXC_INT_GPU2D MX35_INT_GPU2D
+#define MXC_INT_ASRC MX35_INT_ASRC
+#define MXC_INT_USBHS MX35_INT_USBHS
+#define MXC_INT_USBOTG MX35_INT_USBOTG
+#define MXC_INT_ESAI MX35_INT_ESAI
+#define MXC_INT_CAN1 MX35_INT_CAN1
+#define MXC_INT_CAN2 MX35_INT_CAN2
+#define MXC_INT_MLB MX35_INT_MLB
+#define MXC_INT_SPDIF MX35_INT_SPDIF
+#define MXC_INT_FEC MX35_INT_FEC
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 009f444..be69272 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -34,120 +34,117 @@
* C0000000 64M PCMCIA/CF
*/
-#define CS0_BASE_ADDR 0xA0000000
-#define CS1_BASE_ADDR 0xA8000000
-#define CS2_BASE_ADDR 0xB0000000
-#define CS3_BASE_ADDR 0xB2000000
-
-#define CS4_BASE_ADDR 0xB4000000
-#define CS4_BASE_ADDR_VIRT 0xF4000000
-#define CS4_SIZE SZ_32M
-
-#define CS5_BASE_ADDR 0xB6000000
-#define CS5_BASE_ADDR_VIRT 0xF6000000
-#define CS5_SIZE SZ_32M
-
-#define PCMCIA_MEM_BASE_ADDR 0xBC000000
-
/*
* L2CC
*/
-#define L2CC_BASE_ADDR 0x30000000
-#define L2CC_SIZE SZ_1M
+#define MX3x_L2CC_BASE_ADDR 0x30000000
+#define MX3x_L2CC_SIZE SZ_1M
/*
* AIPS 1
*/
-#define AIPS1_BASE_ADDR 0x43F00000
-#define AIPS1_BASE_ADDR_VIRT 0xFC000000
-#define AIPS1_SIZE SZ_1M
-
-#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000)
-#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000)
-#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000)
+#define MX3x_AIPS1_BASE_ADDR 0x43f00000
+#define MX3x_AIPS1_BASE_ADDR_VIRT 0xfc000000
+#define MX3x_AIPS1_SIZE SZ_1M
+#define MX3x_MAX_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x04000)
+#define MX3x_EVTMON_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x08000)
+#define MX3x_CLKCTL_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x0c000)
+#define MX3x_ETB_SLOT4_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x10000)
+#define MX3x_ETB_SLOT5_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x14000)
+#define MX3x_ECT_CTIO_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x18000)
+#define MX3x_I2C_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x80000)
+#define MX3x_I2C3_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x84000)
+#define MX3x_UART1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x90000)
+#define MX3x_UART2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x94000)
+#define MX3x_I2C2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x98000)
+#define MX3x_OWIRE_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0x9c000)
+#define MX3x_SSI1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa0000)
+#define MX3x_CSPI1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa4000)
+#define MX3x_KPP_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xa8000)
+#define MX3x_IOMUXC_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xac000)
+#define MX3x_ECT_IP1_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xb8000)
+#define MX3x_ECT_IP2_BASE_ADDR (MX3x_AIPS1_BASE_ADDR + 0xbc000)
/*
* SPBA global module enabled #0
*/
-#define SPBA0_BASE_ADDR 0x50000000
-#define SPBA0_BASE_ADDR_VIRT 0xFC100000
-#define SPBA0_SIZE SZ_1M
-
-#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000)
-#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000)
+#define MX3x_SPBA0_BASE_ADDR 0x50000000
+#define MX3x_SPBA0_BASE_ADDR_VIRT 0xfc100000
+#define MX3x_SPBA0_SIZE SZ_1M
+#define MX3x_UART3_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x0c000)
+#define MX3x_CSPI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x10000)
+#define MX3x_SSI2_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x14000)
+#define MX3x_ATA_DMA_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x20000)
+#define MX3x_MSHC1_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x24000)
+#define MX3x_SPBA_CTRL_BASE_ADDR (MX3x_SPBA0_BASE_ADDR + 0x3c000)
/*
* AIPS 2
*/
-#define AIPS2_BASE_ADDR 0x53F00000
-#define AIPS2_BASE_ADDR_VIRT 0xFC200000
-#define AIPS2_SIZE SZ_1M
-#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000)
-#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000)
-#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000)
-#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000)
+#define MX3x_AIPS2_BASE_ADDR 0x53f00000
+#define MX3x_AIPS2_BASE_ADDR_VIRT 0xfc200000
+#define MX3x_AIPS2_SIZE SZ_1M
+#define MX3x_CCM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x80000)
+#define MX3x_GPT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x90000)
+#define MX3x_EPIT1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x94000)
+#define MX3x_EPIT2_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0x98000)
+#define MX3x_GPIO3_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xa4000)
+#define MX3x_SCC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xac000)
+#define MX3x_RNGA_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xb0000)
+#define MX3x_IPU_CTRL_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xc0000)
+#define MX3x_AUDMUX_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xc4000)
+#define MX3x_GPIO1_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xcc000)
+#define MX3x_GPIO2_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd0000)
+#define MX3x_SDMA_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd4000)
+#define MX3x_RTC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xd8000)
+#define MX3x_WDOG_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xdc000)
+#define MX3x_PWM_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xe0000)
+#define MX3x_RTIC_BASE_ADDR (MX3x_AIPS2_BASE_ADDR + 0xec000)
/*
* ROMP and AVIC
*/
-#define ROMP_BASE_ADDR 0x60000000
-#define ROMP_BASE_ADDR_VIRT 0xFC500000
-#define ROMP_SIZE SZ_1M
+#define MX3x_ROMP_BASE_ADDR 0x60000000
+#define MX3x_ROMP_BASE_ADDR_VIRT 0xfc500000
+#define MX3x_ROMP_SIZE SZ_1M
-#define AVIC_BASE_ADDR 0x68000000
-#define AVIC_BASE_ADDR_VIRT 0xFC400000
-#define AVIC_SIZE SZ_1M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define X_MEMC_BASE_ADDR 0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT 0xFC320000
-#define X_MEMC_SIZE SZ_64K
-
-#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR
+#define MX3x_AVIC_BASE_ADDR 0x68000000
+#define MX3x_AVIC_BASE_ADDR_VIRT 0xfc400000
+#define MX3x_AVIC_SIZE SZ_1M
/*
* Memory regions and CS
*/
-#define IPU_MEM_BASE_ADDR 0x70000000
-#define CSD0_BASE_ADDR 0x80000000
-#define CSD1_BASE_ADDR 0x90000000
+#define MX3x_IPU_MEM_BASE_ADDR 0x70000000
+#define MX3x_CSD0_BASE_ADDR 0x80000000
+#define MX3x_CSD1_BASE_ADDR 0x90000000
+
+#define MX3x_CS0_BASE_ADDR 0xa0000000
+#define MX3x_CS1_BASE_ADDR 0xa8000000
+#define MX3x_CS2_BASE_ADDR 0xb0000000
+#define MX3x_CS3_BASE_ADDR 0xb2000000
+
+#define MX3x_CS4_BASE_ADDR 0xb4000000
+#define MX3x_CS4_BASE_ADDR_VIRT 0xf4000000
+#define MX3x_CS4_SIZE SZ_32M
+
+#define MX3x_CS5_BASE_ADDR 0xb6000000
+#define MX3x_CS5_BASE_ADDR_VIRT 0xf6000000
+#define MX3x_CS5_SIZE SZ_32M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MX3x_X_MEMC_BASE_ADDR 0xb8000000
+#define MX3x_X_MEMC_BASE_ADDR_VIRT 0xfc320000
+#define MX3x_X_MEMC_SIZE SZ_64K
+#define MX3x_ESDCTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x1000)
+#define MX3x_WEIM_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x2000)
+#define MX3x_M3IF_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x3000)
+#define MX3x_EMI_CTL_BASE_ADDR (MX3x_X_MEMC_BASE_ADDR + 0x4000)
+#define MX3x_PCMCIA_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR
+
+#define MX3x_PCMCIA_MEM_BASE_ADDR 0xbc000000
/*!
* This macro defines the physical to virtual address mapping for all the
@@ -202,74 +199,207 @@
/*
* Interrupt numbers
*/
-#define MXC_INT_I2C3 3
-#define MXC_INT_I2C2 4
-#define MXC_INT_RTIC 6
-#define MXC_INT_I2C 10
-#define MXC_INT_CSPI2 13
-#define MXC_INT_CSPI1 14
-#define MXC_INT_ATA 15
-#define MXC_INT_UART3 18
-#define MXC_INT_IIM 19
-#define MXC_INT_RNGA 22
-#define MXC_INT_EVTMON 23
-#define MXC_INT_KPP 24
-#define MXC_INT_RTC 25
-#define MXC_INT_PWM 26
-#define MXC_INT_EPIT2 27
-#define MXC_INT_EPIT1 28
-#define MXC_INT_GPT 29
-#define MXC_INT_POWER_FAIL 30
-#define MXC_INT_UART2 32
-#define MXC_INT_NANDFC 33
-#define MXC_INT_SDMA 34
-#define MXC_INT_MSHC1 39
-#define MXC_INT_IPU_ERR 41
-#define MXC_INT_IPU_SYN 42
-#define MXC_INT_UART1 45
-#define MXC_INT_ECT 48
-#define MXC_INT_SCC_SCM 49
-#define MXC_INT_SCC_SMN 50
-#define MXC_INT_GPIO2 51
-#define MXC_INT_GPIO1 52
-#define MXC_INT_WDOG 55
-#define MXC_INT_GPIO3 56
-#define MXC_INT_EXT_POWER 58
-#define MXC_INT_EXT_TEMPER 59
-#define MXC_INT_EXT_SENSOR60 60
-#define MXC_INT_EXT_SENSOR61 61
-#define MXC_INT_EXT_WDOG 62
-#define MXC_INT_EXT_TV 63
+#define MX3x_INT_I2C3 3
+#define MX3x_INT_I2C2 4
+#define MX3x_INT_RTIC 6
+#define MX3x_INT_I2C 10
+#define MX3x_INT_CSPI2 13
+#define MX3x_INT_CSPI1 14
+#define MX3x_INT_ATA 15
+#define MX3x_INT_UART3 18
+#define MX3x_INT_IIM 19
+#define MX3x_INT_RNGA 22
+#define MX3x_INT_EVTMON 23
+#define MX3x_INT_KPP 24
+#define MX3x_INT_RTC 25
+#define MX3x_INT_PWM 26
+#define MX3x_INT_EPIT2 27
+#define MX3x_INT_EPIT1 28
+#define MX3x_INT_GPT 29
+#define MX3x_INT_POWER_FAIL 30
+#define MX3x_INT_UART2 32
+#define MX3x_INT_NANDFC 33
+#define MX3x_INT_SDMA 34
+#define MX3x_INT_MSHC1 39
+#define MX3x_INT_IPU_ERR 41
+#define MX3x_INT_IPU_SYN 42
+#define MX3x_INT_UART1 45
+#define MX3x_INT_ECT 48
+#define MX3x_INT_SCC_SCM 49
+#define MX3x_INT_SCC_SMN 50
+#define MX3x_INT_GPIO2 51
+#define MX3x_INT_GPIO1 52
+#define MX3x_INT_WDOG 55
+#define MX3x_INT_GPIO3 56
+#define MX3x_INT_EXT_POWER 58
+#define MX3x_INT_EXT_TEMPER 59
+#define MX3x_INT_EXT_SENSOR60 60
+#define MX3x_INT_EXT_SENSOR61 61
+#define MX3x_INT_EXT_WDOG 62
+#define MX3x_INT_EXT_TV 63
-#define PROD_SIGNATURE 0x1 /* For MX31 */
+#define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */
/* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0 0x10
-#define CHIP_REV_1_1 0x11
-#define CHIP_REV_1_2 0x12
-#define CHIP_REV_1_3 0x13
-#define CHIP_REV_2_0 0x20
-#define CHIP_REV_2_1 0x21
-#define CHIP_REV_2_2 0x22
-#define CHIP_REV_2_3 0x23
-#define CHIP_REV_3_0 0x30
-#define CHIP_REV_3_1 0x31
-#define CHIP_REV_3_2 0x32
+#define MX3x_CHIP_REV_1_0 0x10
+#define MX3x_CHIP_REV_1_1 0x11
+#define MX3x_CHIP_REV_1_2 0x12
+#define MX3x_CHIP_REV_1_3 0x13
+#define MX3x_CHIP_REV_2_0 0x20
+#define MX3x_CHIP_REV_2_1 0x21
+#define MX3x_CHIP_REV_2_2 0x22
+#define MX3x_CHIP_REV_2_3 0x23
+#define MX3x_CHIP_REV_3_0 0x30
+#define MX3x_CHIP_REV_3_1 0x31
+#define MX3x_CHIP_REV_3_2 0x32
-#define SYSTEM_REV_MIN CHIP_REV_1_0
-#define SYSTEM_REV_NUM 3
+#define MX3x_SYSTEM_REV_MIN MX3x_CHIP_REV_1_0
+#define MX3x_SYSTEM_REV_NUM 3
/* Mandatory defines used globally */
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern unsigned int system_rev;
+extern unsigned int mx31_cpu_rev;
+extern void mx31_read_cpu_rev(void);
static inline int mx31_revision(void)
{
- return system_rev;
+ return mx31_cpu_rev;
}
#endif
-#endif /* __ASM_ARCH_MXC_MX31_H__ */
+/* these should go away */
+#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
+#define L2CC_SIZE MX3x_L2CC_SIZE
+#define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR
+#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT
+#define AIPS1_SIZE MX3x_AIPS1_SIZE
+#define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR
+#define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR
+#define CLKCTL_BASE_ADDR MX3x_CLKCTL_BASE_ADDR
+#define ETB_SLOT4_BASE_ADDR MX3x_ETB_SLOT4_BASE_ADDR
+#define ETB_SLOT5_BASE_ADDR MX3x_ETB_SLOT5_BASE_ADDR
+#define ECT_CTIO_BASE_ADDR MX3x_ECT_CTIO_BASE_ADDR
+#define I2C_BASE_ADDR MX3x_I2C_BASE_ADDR
+#define I2C3_BASE_ADDR MX3x_I2C3_BASE_ADDR
+#define UART1_BASE_ADDR MX3x_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX3x_UART2_BASE_ADDR
+#define I2C2_BASE_ADDR MX3x_I2C2_BASE_ADDR
+#define OWIRE_BASE_ADDR MX3x_OWIRE_BASE_ADDR
+#define SSI1_BASE_ADDR MX3x_SSI1_BASE_ADDR
+#define CSPI1_BASE_ADDR MX3x_CSPI1_BASE_ADDR
+#define KPP_BASE_ADDR MX3x_KPP_BASE_ADDR
+#define IOMUXC_BASE_ADDR MX3x_IOMUXC_BASE_ADDR
+#define ECT_IP1_BASE_ADDR MX3x_ECT_IP1_BASE_ADDR
+#define ECT_IP2_BASE_ADDR MX3x_ECT_IP2_BASE_ADDR
+#define SPBA0_BASE_ADDR MX3x_SPBA0_BASE_ADDR
+#define SPBA0_BASE_ADDR_VIRT MX3x_SPBA0_BASE_ADDR_VIRT
+#define SPBA0_SIZE MX3x_SPBA0_SIZE
+#define UART3_BASE_ADDR MX3x_UART3_BASE_ADDR
+#define CSPI2_BASE_ADDR MX3x_CSPI2_BASE_ADDR
+#define SSI2_BASE_ADDR MX3x_SSI2_BASE_ADDR
+#define ATA_DMA_BASE_ADDR MX3x_ATA_DMA_BASE_ADDR
+#define MSHC1_BASE_ADDR MX3x_MSHC1_BASE_ADDR
+#define SPBA_CTRL_BASE_ADDR MX3x_SPBA_CTRL_BASE_ADDR
+#define AIPS2_BASE_ADDR MX3x_AIPS2_BASE_ADDR
+#define AIPS2_BASE_ADDR_VIRT MX3x_AIPS2_BASE_ADDR_VIRT
+#define AIPS2_SIZE MX3x_AIPS2_SIZE
+#define CCM_BASE_ADDR MX3x_CCM_BASE_ADDR
+#define GPT1_BASE_ADDR MX3x_GPT1_BASE_ADDR
+#define EPIT1_BASE_ADDR MX3x_EPIT1_BASE_ADDR
+#define EPIT2_BASE_ADDR MX3x_EPIT2_BASE_ADDR
+#define GPIO3_BASE_ADDR MX3x_GPIO3_BASE_ADDR
+#define SCC_BASE_ADDR MX3x_SCC_BASE_ADDR
+#define RNGA_BASE_ADDR MX3x_RNGA_BASE_ADDR
+#define IPU_CTRL_BASE_ADDR MX3x_IPU_CTRL_BASE_ADDR
+#define AUDMUX_BASE_ADDR MX3x_AUDMUX_BASE_ADDR
+#define GPIO1_BASE_ADDR MX3x_GPIO1_BASE_ADDR
+#define GPIO2_BASE_ADDR MX3x_GPIO2_BASE_ADDR
+#define SDMA_BASE_ADDR MX3x_SDMA_BASE_ADDR
+#define RTC_BASE_ADDR MX3x_RTC_BASE_ADDR
+#define WDOG_BASE_ADDR MX3x_WDOG_BASE_ADDR
+#define PWM_BASE_ADDR MX3x_PWM_BASE_ADDR
+#define RTIC_BASE_ADDR MX3x_RTIC_BASE_ADDR
+#define ROMP_BASE_ADDR MX3x_ROMP_BASE_ADDR
+#define ROMP_BASE_ADDR_VIRT MX3x_ROMP_BASE_ADDR_VIRT
+#define ROMP_SIZE MX3x_ROMP_SIZE
+#define AVIC_BASE_ADDR MX3x_AVIC_BASE_ADDR
+#define AVIC_BASE_ADDR_VIRT MX3x_AVIC_BASE_ADDR_VIRT
+#define AVIC_SIZE MX3x_AVIC_SIZE
+#define IPU_MEM_BASE_ADDR MX3x_IPU_MEM_BASE_ADDR
+#define CSD0_BASE_ADDR MX3x_CSD0_BASE_ADDR
+#define CSD1_BASE_ADDR MX3x_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX3x_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX3x_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX3x_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX3x_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX3x_CS4_BASE_ADDR
+#define CS4_BASE_ADDR_VIRT MX3x_CS4_BASE_ADDR_VIRT
+#define CS4_SIZE MX3x_CS4_SIZE
+#define CS5_BASE_ADDR MX3x_CS5_BASE_ADDR
+#define CS5_BASE_ADDR_VIRT MX3x_CS5_BASE_ADDR_VIRT
+#define CS5_SIZE MX3x_CS5_SIZE
+#define X_MEMC_BASE_ADDR MX3x_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX3x_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX3x_X_MEMC_SIZE
+#define ESDCTL_BASE_ADDR MX3x_ESDCTL_BASE_ADDR
+#define WEIM_BASE_ADDR MX3x_WEIM_BASE_ADDR
+#define M3IF_BASE_ADDR MX3x_M3IF_BASE_ADDR
+#define EMI_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX3x_PCMCIA_CTL_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX3x_PCMCIA_MEM_BASE_ADDR
+#define MXC_INT_I2C3 MX3x_INT_I2C3
+#define MXC_INT_I2C2 MX3x_INT_I2C2
+#define MXC_INT_RTIC MX3x_INT_RTIC
+#define MXC_INT_I2C MX3x_INT_I2C
+#define MXC_INT_CSPI2 MX3x_INT_CSPI2
+#define MXC_INT_CSPI1 MX3x_INT_CSPI1
+#define MXC_INT_ATA MX3x_INT_ATA
+#define MXC_INT_UART3 MX3x_INT_UART3
+#define MXC_INT_IIM MX3x_INT_IIM
+#define MXC_INT_RNGA MX3x_INT_RNGA
+#define MXC_INT_EVTMON MX3x_INT_EVTMON
+#define MXC_INT_KPP MX3x_INT_KPP
+#define MXC_INT_RTC MX3x_INT_RTC
+#define MXC_INT_PWM MX3x_INT_PWM
+#define MXC_INT_EPIT2 MX3x_INT_EPIT2
+#define MXC_INT_EPIT1 MX3x_INT_EPIT1
+#define MXC_INT_GPT MX3x_INT_GPT
+#define MXC_INT_POWER_FAIL MX3x_INT_POWER_FAIL
+#define MXC_INT_UART2 MX3x_INT_UART2
+#define MXC_INT_NANDFC MX3x_INT_NANDFC
+#define MXC_INT_SDMA MX3x_INT_SDMA
+#define MXC_INT_MSHC1 MX3x_INT_MSHC1
+#define MXC_INT_IPU_ERR MX3x_INT_IPU_ERR
+#define MXC_INT_IPU_SYN MX3x_INT_IPU_SYN
+#define MXC_INT_UART1 MX3x_INT_UART1
+#define MXC_INT_ECT MX3x_INT_ECT
+#define MXC_INT_SCC_SCM MX3x_INT_SCC_SCM
+#define MXC_INT_SCC_SMN MX3x_INT_SCC_SMN
+#define MXC_INT_GPIO2 MX3x_INT_GPIO2
+#define MXC_INT_GPIO1 MX3x_INT_GPIO1
+#define MXC_INT_WDOG MX3x_INT_WDOG
+#define MXC_INT_GPIO3 MX3x_INT_GPIO3
+#define MXC_INT_EXT_POWER MX3x_INT_EXT_POWER
+#define MXC_INT_EXT_TEMPER MX3x_INT_EXT_TEMPER
+#define MXC_INT_EXT_SENSOR60 MX3x_INT_EXT_SENSOR60
+#define MXC_INT_EXT_SENSOR61 MX3x_INT_EXT_SENSOR61
+#define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG
+#define MXC_INT_EXT_TV MX3x_INT_EXT_TV
+#define PROD_SIGNATURE MX3x_PROD_SIGNATURE
+#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0
+#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1
+#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2
+#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3
+#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0
+#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1
+#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2
+#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3
+#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0
+#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1
+#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
+#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
+#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
+#endif /* __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
new file mode 100644
index 0000000..96b6ab4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_ULPI_H
+#define __MACH_ULPI_H
+
+extern struct otg_io_access_ops mxc_ulpi_access_ops;
+
+#endif /* __MACH_ULPI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 082a390..4d5d395 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -83,6 +83,8 @@
case MACH_TYPE_MX27ADS:
case MACH_TYPE_PCM038:
case MACH_TYPE_MX21ADS:
+ case MACH_TYPE_PCA100:
+ case MACH_TYPE_MXT_TD60:
uart_base = MX2X_UART1_BASE_ADDR;
break;
case MACH_TYPE_MX31LITE:
@@ -94,6 +96,7 @@
case MACH_TYPE_MX31ADS:
case MACH_TYPE_MX35_3DS:
case MACH_TYPE_PCM043:
+ case MACH_TYPE_LILLY1131:
uart_base = MX3X_UART1_BASE_ADDR;
break;
case MACH_TYPE_MAGX_ZN5:
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 851ca99..b318c6a 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -31,19 +31,11 @@
static void __iomem *base;
-static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
-
/*
- * setups a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
+ * setups a single pad in the iomuxer
*/
int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
{
- unsigned int pad_ofs = pad->pad_ctrl_ofs;
-
- if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
- return -EBUSY;
if (pad->mux_ctrl_ofs)
__raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
@@ -66,37 +58,13 @@
for (i = 0; i < count; i++) {
ret = mxc_iomux_v3_setup_pad(p);
if (ret)
- goto setup_error;
+ return ret;
p++;
}
return 0;
-
-setup_error:
- mxc_iomux_v3_release_multiple_pads(pad_list, i);
- return ret;
}
EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
-void mxc_iomux_v3_release_pad(struct pad_desc *pad)
-{
- unsigned int pad_ofs = pad->pad_ctrl_ofs;
-
- clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
-
-void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
-{
- struct pad_desc *p = pad_list;
- int i;
-
- for (i = 0; i < count; i++) {
- mxc_iomux_v3_release_pad(p);
- p++;
- }
-}
-EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
-
void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
{
base = iomux_v3_base;
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
new file mode 100644
index 0000000..582c6df
--- /dev/null
+++ b/arch/arm/plat-mxc/ulpi.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ * Copyright 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+
+#include <mach/ulpi.h>
+
+/* ULPIVIEW register bits */
+#define ULPIVW_WU (1 << 31) /* Wakeup */
+#define ULPIVW_RUN (1 << 30) /* read/write run */
+#define ULPIVW_WRITE (1 << 29) /* 0 = read 1 = write */
+#define ULPIVW_SS (1 << 27) /* SyncState */
+#define ULPIVW_PORT_MASK 0x07 /* Port field */
+#define ULPIVW_PORT_SHIFT 24
+#define ULPIVW_ADDR_MASK 0xff /* data address field */
+#define ULPIVW_ADDR_SHIFT 16
+#define ULPIVW_RDATA_MASK 0xff /* read data field */
+#define ULPIVW_RDATA_SHIFT 8
+#define ULPIVW_WDATA_MASK 0xff /* write data field */
+#define ULPIVW_WDATA_SHIFT 0
+
+static int ulpi_poll(void __iomem *view, u32 bit)
+{
+ int timeout = 10000;
+
+ while (timeout--) {
+ u32 data = __raw_readl(view);
+
+ if (!(data & bit))
+ return 0;
+
+ cpu_relax();
+ };
+
+ printk(KERN_WARNING "timeout polling for ULPI device\n");
+
+ return -ETIMEDOUT;
+}
+
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+ int ret;
+ void __iomem *view = otg->io_priv;
+
+ /* make sure interface is running */
+ if (!(__raw_readl(view) & ULPIVW_SS)) {
+ __raw_writel(ULPIVW_WU, view);
+
+ /* wait for wakeup */
+ ret = ulpi_poll(view, ULPIVW_WU);
+ if (ret)
+ return ret;
+ }
+
+ /* read the register */
+ __raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
+
+ /* wait for completion */
+ ret = ulpi_poll(view, ULPIVW_RUN);
+ if (ret)
+ return ret;
+
+ return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+ int ret;
+ void __iomem *view = otg->io_priv;
+
+ /* make sure the interface is running */
+ if (!(__raw_readl(view) & ULPIVW_SS)) {
+ __raw_writel(ULPIVW_WU, view);
+ /* wait for wakeup */
+ ret = ulpi_poll(view, ULPIVW_WU);
+ if (ret)
+ return ret;
+ }
+
+ __raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
+ (reg << ULPIVW_ADDR_SHIFT) |
+ ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view);
+
+ /* wait for completion */
+ return ulpi_poll(view, ULPIVW_RUN);
+}
+
+struct otg_io_access_ops mxc_ulpi_access_ops = {
+ .read = ulpi_read,
+ .write = ulpi_write,
+};
+EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
+
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
new file mode 100644
index 0000000..159daf5
--- /dev/null
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -0,0 +1,22 @@
+# We keep common IP's here for Nomadik and other similar
+# familiy of processors from ST-Ericsson. At the moment we have
+# just MTU, others to follow soon.
+
+config PLAT_NOMADIK
+ bool
+ depends on ARCH_NOMADIK || ARCH_U8500
+ default y
+ help
+ Common platform code for Nomadik and other ST-Ericsson
+ platforms.
+
+if PLAT_NOMADIK
+
+config HAS_MTU
+ bool
+ help
+ Support for Multi Timer Unit. MTU provides access
+ to multiple interrupt generating programmable
+ 32-bit free running decrementing counters.
+
+endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
new file mode 100644
index 0000000..37c7cdd
--- /dev/null
+++ b/arch/arm/plat-nomadik/Makefile
@@ -0,0 +1,5 @@
+# arch/arm/plat-nomadik/Makefile
+# Copyright 2009 ST-Ericsson
+# Licensed under GPLv2
+
+obj-$(CONFIG_HAS_MTU) += timer.o
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
similarity index 90%
rename from arch/arm/mach-nomadik/include/mach/mtu.h
rename to arch/arm/plat-nomadik/include/plat/mtu.h
index 76da7f0..42c9072 100644
--- a/arch/arm/mach-nomadik/include/mach/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,5 +1,8 @@
-#ifndef __ASM_ARCH_MTU_H
-#define __ASM_ARCH_MTU_H
+#ifndef __PLAT_MTU_H
+#define __PLAT_MTU_H
+
+/* should be set by the platform code */
+extern void __iomem *mtu_base;
/*
* The MTU device hosts four different counters, with 4 set of
@@ -41,5 +44,5 @@
#define MTU_PCELL2 0xff8
#define MTU_PCELL3 0xffC
-#endif /* __ASM_ARCH_MTU_H */
+#endif /* __PLAT_MTU_H */
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
similarity index 81%
rename from arch/arm/mach-nomadik/timer.c
rename to arch/arm/plat-nomadik/timer.c
index d1738e7..62f18ad 100644
--- a/arch/arm/mach-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -15,19 +15,14 @@
#include <linux/clockchips.h>
#include <linux/jiffies.h>
#include <asm/mach/time.h>
-#include <mach/mtu.h>
-#define TIMER_CTRL 0x80 /* No divisor */
-#define TIMER_PERIODIC 0x40
-#define TIMER_SZ32BIT 0x02
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK 0x00007fff
-#define SRC_CR_INIT_VAL 0x2aaa8000
+#include <plat/mtu.h>
static u32 nmdk_count; /* accumulated count */
static u32 nmdk_cycle; /* write-once */
-static __iomem void *mtu_base;
+
+/* setup by the platform code */
+void __iomem *mtu_base;
/*
* clocksource: the MTU device is a decrementing counters, so we negate
@@ -93,7 +88,7 @@
static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
{
/* ack: "interrupt clear register" */
- writel( 1 << 0, mtu_base + MTU_ICR);
+ writel(1 << 0, mtu_base + MTU_ICR);
/* we can't count lost ticks, unfortunately */
nmdk_count += nmdk_cycle;
@@ -125,24 +120,14 @@
writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
}
-static void __init nmdk_timer_init(void)
+void __init nmdk_timer_init(void)
{
- u32 src_cr;
unsigned long rate;
int bits;
rate = CLOCK_TICK_RATE; /* 2.4MHz */
nmdk_cycle = (rate + HZ/2) / HZ;
- /* Configure timer sources in "system reset controller" ctrl reg */
- src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
- src_cr &= SRC_CR_INIT_MASK;
- src_cr |= SRC_CR_INIT_VAL;
- writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-
- /* Save global pointer to mtu, used by functions above */
- mtu_base = io_p2v(NOMADIK_MTU0_BASE);
-
/* Init the timer and register clocksource */
nmdk_timer_reset();
@@ -150,7 +135,9 @@
bits = 8*sizeof(nmdk_count);
nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
- clocksource_register(&nmdk_clksrc);
+ if (clocksource_register(&nmdk_clksrc))
+ printk(KERN_ERR "timer: failed to initialize clock "
+ "source %s\n", nmdk_clksrc.name);
/* Register irq and clockevents */
setup_irq(IRQ_MTU0, &nmdk_timer_irq);
@@ -158,7 +145,3 @@
nmdk_clkevt.cpumask = cpumask_of(0);
clockevents_register_device(&nmdk_clkevt);
}
-
-struct sys_timer nomadik_timer = {
- .init = nmdk_timer_init,
-};
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
index 9ad41dc..3325f7b 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -68,6 +68,13 @@
__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
__dma; })
+#define __arch_dma_to_page(dev, addr) \
+ ({ dma_addr_t __dma = addr; \
+ if (is_lbus_device(dev)) \
+ __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
+ phys_to_page(__dma); \
+ })
+
#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
lbus_to_virt(addr) : \
__phys_to_virt(addr)); })
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
similarity index 100%
rename from arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
rename to arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 8931c5f..e139a72 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -159,6 +159,12 @@
Internal configuration to enable S3C64XX style GPIO configuration
functions.
+config S5P_GPIO_CFG_S5PC1XX
+ bool
+ help
+ Internal configuration to enable S5PC1XX style GPIO configuration
+ functions.
+
# DMA
config S3C_DMA
@@ -178,6 +184,11 @@
help
Compile in platform device definitions for HSMMC channel 1
+config S3C_DEV_HSMMC2
+ bool
+ help
+ Compile in platform device definitions for HSMMC channel 2
+
config S3C_DEV_I2C1
bool
help
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 3c09109..50444da 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -36,6 +36,7 @@
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
+obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
index 4d01ef1..619cfa8 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-s3c/clock.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/clock.c
*
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX Core clock control support
@@ -337,7 +337,7 @@
int __init s3c24xx_register_baseclocks(unsigned long xtal)
{
- printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+ printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
clk_xtal.rate = xtal;
diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-s3c/dev-hsmmc2.c
new file mode 100644
index 0000000..824580b
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc2.c
@@ -0,0 +1,69 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc2.c
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * Copyright (c) 2009 Maurus Cuelenaere
+ *
+ * Based on arch/arm/plat-s3c/dev-hsmmc1.c
+ * original file Copyright (c) 2008 Simtec Electronics
+ *
+ * S3C series device definition for hsmmc device 2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC (0x1000)
+
+static struct resource s3c_hsmmc2_resource[] = {
+ [0] = {
+ .start = S3C_PA_HSMMC2,
+ .end = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_HSMMC2,
+ .end = IRQ_HSMMC2,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
+ .max_width = 4,
+ .host_caps = (MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc2 = {
+ .name = "s3c-sdhci",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c_hsmmc2_resource),
+ .resource = s3c_hsmmc2_resource,
+ .dev = {
+ .dma_mask = &s3c_device_hsmmc2_dmamask,
+ .coherent_dma_mask = 0xffffffffUL,
+ .platform_data = &s3c_hsmmc2_def_platdata,
+ },
+};
+
+void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+ struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
+
+ set->max_width = pd->max_width;
+
+ if (pd->cfg_gpio)
+ set->cfg_gpio = pd->cfg_gpio;
+ if (pd->cfg_card)
+ set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
index 4283728..4c76152 100644
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c/dev-i2c0.c
*
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
index 8349c46..d44f791 100644
--- a/arch/arm/plat-s3c/dev-i2c1.c
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c/dev-i2c1.c
*
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
index 4e53237..e771e77 100644
--- a/arch/arm/plat-s3c/dev-nand.c
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -9,8 +9,12 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
#include <mach/map.h>
#include <plat/devs.h>
+#include <plat/nand.h>
static struct resource s3c_nand_resource[] = {
[0] = {
@@ -28,3 +32,96 @@
};
EXPORT_SYMBOL(s3c_device_nand);
+
+/**
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+ void *ptr;
+ int size;
+
+ size = sizeof(struct mtd_partition) * set->nr_partitions;
+ if (size) {
+ ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+ set->partitions = ptr;
+
+ if (!ptr)
+ return -ENOMEM;
+ }
+
+ size = sizeof(int) * set->nr_chips;
+ if (size) {
+ ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+ set->nr_map = ptr;
+
+ if (!ptr)
+ return -ENOMEM;
+ }
+
+ if (set->ecc_layout) {
+ ptr = kmemdup(set->ecc_layout,
+ sizeof(struct nand_ecclayout), GFP_KERNEL);
+ set->ecc_layout = ptr;
+
+ if (!ptr)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+ struct s3c2410_platform_nand *npd;
+ int size;
+ int ret;
+
+ /* note, if we get a failure in allocation, we simply drop out of the
+ * function. If there is so little memory available at initialisation
+ * time then there is little chance the system is going to run.
+ */
+
+ npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL);
+ if (!npd) {
+ printk(KERN_ERR "%s: failed copying platform data\n", __func__);
+ return;
+ }
+
+ /* now see if we need to copy any of the nand set data */
+
+ size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+ if (size) {
+ struct s3c2410_nand_set *from = npd->sets;
+ struct s3c2410_nand_set *to;
+ int i;
+
+ to = kmemdup(from, size, GFP_KERNEL);
+ npd->sets = to; /* set, even if we failed */
+
+ if (!to) {
+ printk(KERN_ERR "%s: no memory for sets\n", __func__);
+ return;
+ }
+
+ for (i = 0; i < npd->nr_sets; i++) {
+ ret = s3c_nand_copy_set(to);
+ if (!ret) {
+ printk(KERN_ERR "%s: failed to copy set %d\n",
+ __func__, i);
+ return;
+ }
+ to++;
+ }
+ }
+}
+
+EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
index c9db75c..a995850 100644
--- a/arch/arm/plat-s3c/dma.c
+++ b/arch/arm/plat-s3c/dma.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c/dma.c
*
- * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h
index 0f440b9..53a9365 100644
--- a/arch/arm/plat-s3c/include/plat/audio-simtec.h
+++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h
@@ -33,5 +33,5 @@
void (*startup)(void);
};
-extern int simtec_audio_add(const char *codec_name,
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index 7b982b7..94eb06a 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -1,6 +1,6 @@
/* arch/arm/plat-s3c/include/plat/cpu-freq.h
*
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index fbc3d49..d1131ca 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -12,6 +12,9 @@
/* todo - fix when rmk changes iodescs to use `void __iomem *` */
+#ifndef __SAMSUNG_PLAT_CPU_H
+#define __SAMSUNG_PLAT_CPU_H
+
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
@@ -73,3 +76,6 @@
extern struct sysdev_class s3c6410_sysclass;
extern struct sysdev_class s3c64xx_sysclass;
+extern void (*s5pc1xx_idle)(void);
+
+#endif
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
index 34dba98..e429d10 100644
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -1,6 +1,6 @@
/* arch/arm/plat-s3c/include/plat/dma.h
*
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C DMA support
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h
index 214ff56..f8db879 100644
--- a/arch/arm/plat-s3c/include/plat/fb.h
+++ b/arch/arm/plat-s3c/include/plat/fb.h
@@ -70,4 +70,11 @@
*/
extern void s3c64xx_fb_gpio_setup_24bpp(void);
+/**
+ * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pc100_fb_gpio_setup_24bpp(void);
+
#endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index 67450f1..3083df0 100644
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -1,6 +1,6 @@
/* arch/arm/plat-s3c/include/plat/iic.h
*
- * Copyright 2004,2009 Simtec Electronics
+ * Copyright 2004-2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C - I2C Controller platform_device info
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index 18f9588..0659859 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -55,3 +55,11 @@
int chip);
};
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
new file mode 100644
index 0000000..a60ed0d
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
@@ -0,0 +1,235 @@
+/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5) /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN (1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0 (0x10)
+#define VIDTCON1 (0x14)
+#define VIDTCON2 (0x18)
+
+/* Window position controls */
+
+#define WINCON(_win) (0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win) (0x40 + ((_win) * 16))
+#define VIDOSD_B(_win) (0x44 + ((_win) * 16))
+#define VIDOSD_C(_win) (0x48 + ((_win) * 16))
+#define VIDOSD_D(_win) (0x4C + ((_win) * 16))
+
+
+#define VIDINTCON0 (0x130)
+
+#define WxKEYCONy(_win, _con) ((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK (0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT (26)
+#define WINCONx_CSCWIDTH_WIDE (0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW (0x3 << 26)
+
+#define WINCONx_ENLOCAL (1 << 22)
+#define WINCONx_BUFSTATUS (1 << 21)
+#define WINCONx_BUFSEL (1 << 20)
+#define WINCONx_BUFAUTOEN (1 << 19)
+#define WINCONx_YCbCr (1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF (1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF (1 << 23)
+#define WINCON2_BLD_PIX (1 << 6)
+
+#define WINCON2_ALPHA_SEL (1 << 1)
+#define WINCON2_BPPMODE_MASK (0xf << 2)
+#define WINCON2_BPPMODE_SHIFT (2)
+#define WINCON2_BPPMODE_1BPP (0x0 << 2)
+#define WINCON2_BPPMODE_2BPP (0x1 << 2)
+#define WINCON2_BPPMODE_4BPP (0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232 (0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565 (0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555 (0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555 (0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666 (0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665 (0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666 (0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888 (0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887 (0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888 (0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888 (0xd << 2)
+
+#define WINCON3_BLD_PIX (1 << 6)
+
+#define WINCON3_ALPHA_SEL (1 << 1)
+#define WINCON3_BPPMODE_MASK (0xf << 2)
+#define WINCON3_BPPMODE_SHIFT (2)
+#define WINCON3_BPPMODE_1BPP (0x0 << 2)
+#define WINCON3_BPPMODE_2BPP (0x1 << 2)
+#define WINCON3_BPPMODE_4BPP (0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565 (0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555 (0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555 (0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666 (0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665 (0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666 (0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888 (0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887 (0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888 (0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888 (0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2 (0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3 (0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4 (0x40 << 5)
+
+#define DITHMODE (0x170)
+#define WINxMAP(_win) (0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK (0x3 << 5)
+#define DITHMODE_R_POS_SHIFT (5)
+#define DITHMODE_R_POS_8BIT (0x0 << 5)
+#define DITHMODE_R_POS_6BIT (0x1 << 5)
+#define DITHMODE_R_POS_5BIT (0x2 << 5)
+
+#define DITHMODE_G_POS_MASK (0x3 << 3)
+#define DITHMODE_G_POS_SHIFT (3)
+#define DITHMODE_G_POS_8BIT (0x0 << 3)
+#define DITHMODE_G_POS_6BIT (0x1 << 3)
+#define DITHMODE_G_POS_5BIT (0x2 << 3)
+
+#define DITHMODE_B_POS_MASK (0x3 << 1)
+#define DITHMODE_B_POS_SHIFT (1)
+#define DITHMODE_B_POS_8BIT (0x0 << 1)
+#define DITHMODE_B_POS_6BIT (0x1 << 1)
+#define DITHMODE_B_POS_5BIT (0x2 << 1)
+
+#define DITHMODE_DITH_EN (1 << 0)
+
+#define WPALCON (0x1A0)
+
+/* Palette control */
+/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
+ * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
+#define WPALCON_W4PAL_16BPP_A555 (1 << 8)
+#define WPALCON_W3PAL_16BPP_A555 (1 << 7)
+#define WPALCON_W2PAL_16BPP_A555 (1 << 6)
+
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+ if (win < 2)
+ return 256;
+ if (win < 4)
+ return 16;
+ if (win == 4)
+ return 4;
+
+ BUG(); /* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+ /* all windows can do 1/2 bpp */
+
+ if ((bpp == 25 || bpp == 19) && win == 0)
+ return 0; /* win 0 does not have 19 or 25bpp modes */
+
+ if (bpp == 4 && win == 4)
+ return 0;
+
+ if (bpp == 8 && (win >= 3))
+ return 0; /* win 3/4 cannot do 8bpp in any mode */
+
+ return 1;
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+ return window > 1;
+}
+
+struct s3c_fb_palette {
+ struct fb_bitfield r;
+ struct fb_bitfield g;
+ struct fb_bitfield b;
+ struct fb_bitfield a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+ struct s3c_fb_palette *palette)
+{
+ if (window < 2) {
+ /* Windows 0/1 are 8/8/8 or A/8/8/8 */
+ palette->r.offset = 16;
+ palette->r.length = 8;
+ palette->g.offset = 8;
+ palette->g.length = 8;
+ palette->b.offset = 0;
+ palette->b.length = 8;
+ } else {
+ /* currently we assume RGB 5/6/5 */
+ palette->r.offset = 11;
+ palette->r.length = 5;
+ palette->g.offset = 5;
+ palette->g.length = 6;
+ palette->b.offset = 0;
+ palette->b.length = 5;
+ }
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value Win0 Win1 Win2 Win3 Win 4
+ * 0000 1(P) 1(P) 1(P) 1(P) 1(P)
+ * 0001 2(P) 2(P) 2(P) 2(P) 2(P)
+ * 0010 4(P) 4(P) 4(P) 4(P) -none-
+ * 0011 8(P) 8(P) -none- -none- -none-
+ * 0100 -none- 8(A232) 8(A232) -none- -none-
+ * 0101 16(565) 16(565) 16(565) 16(565) 16(565)
+ * 0110 -none- 16(A555) 16(A555) 16(A555) 16(A555)
+ * 0111 16(I555) 16(I565) 16(I555) 16(I555) 16(I555)
+ * 1000 18(666) 18(666) 18(666) 18(666) 18(666)
+ * 1001 -none- 18(A665) 18(A665) 18(A665) 16(A665)
+ * 1010 -none- 19(A666) 19(A666) 19(A666) 19(A666)
+ * 1011 24(888) 24(888) 24(888) 24(888) 24(888)
+ * 1100 -none- 24(A887) 24(A887) 24(A887) 24(A887)
+ * 1101 -none- 25(A888) 25(A888) 25(A888) 25(A888)
+ * 1110 -none- -none- -none- -none- -none-
+ * 1111 -none- -none- -none- -none- -none-
+*/
diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h
index b2caa4b..238efea 100644
--- a/arch/arm/plat-s3c/include/plat/regs-nand.h
+++ b/arch/arm/plat-s3c/include/plat/regs-nand.h
@@ -1,7 +1,7 @@
/* arch/arm/mach-s3c2410/include/mach/regs-nand.h
*
- * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
- * http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
+ * http://www.simtec.co.uk/products/SWLINUX/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 66af75a..85d8904 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -6,7 +6,7 @@
*
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
*
- * Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ * Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk)
*
* Adapted from:
*
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index f615308..5319867 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -57,6 +57,7 @@
*/
extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
/* Default platform data, exported so that per-cpu initialisation can
* set the correct one when there are more than one cpu type selected.
@@ -64,11 +65,16 @@
extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
/* Helper function availablity */
extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
/* S3C6400 SDHCI setup */
@@ -103,6 +109,17 @@
static inline void s3c6400_default_sdhci1(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6400_default_sdhci2(void)
+{
+ s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+ s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
#else
static inline void s3c6400_default_sdhci0(void) { }
static inline void s3c6400_default_sdhci1(void) { }
@@ -140,9 +157,70 @@
static inline void s3c6410_default_sdhci1(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC1 */
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6410_default_sdhci2(void)
+{
+ s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+ s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+ s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
#else
static inline void s3c6410_default_sdhci0(void) { }
static inline void s3c6410_default_sdhci1(void) { }
#endif /* CONFIG_S3C6410_SETUP_SDHCI */
+/* S5PC100 SDHCI setup */
+
+#ifdef CONFIG_S5PC100_SETUP_SDHCI
+extern char *s5pc100_hsmmc_clksrcs[4];
+
+extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pc100_default_sdhci0(void)
+{
+ s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
+ s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pc100_default_sdhci1(void)
+{
+ s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
+ s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pc100_default_sdhci2(void)
+{
+ s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+ s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
+ s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pc100_default_sdhci1(void) { }
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
#endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
index 39f2555..8eb1f43 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -1,7 +1,7 @@
/* linux/arch/arm/plat-s3c/pm-check.c
* originally in linux/arch/arm/plat-s3c24xx/pm.c
*
- * Copyright (c) 2004,2006,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
* http://armlinux.simtec.co.uk
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 8d97db2..7674706 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -1,7 +1,7 @@
/* linux/arch/arm/plat-s3c/pm.c
*
* Copyright 2008 Openmoko, Inc.
- * Copyright 2004,2006,2008 Simtec Electronics
+ * Copyright 2004-2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9c7aca4..20fbf93 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -178,4 +178,11 @@
help
Common machine code for SMDK2410 and SMDK2440
+config S3C24XX_SIMTEC_AUDIO
+ bool
+ depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
+ default y
+ help
+ Add audio devices for common Simtec S3C24XX boards
+
endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 7780d2d..5dee8c1 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -55,3 +55,4 @@
# machine common support
obj-$(CONFIG_MACH_SMDK) += common-smdk.o
+obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 0afb217..ac061a1 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/clock-dclk.c
*
- * Copyright (c) 2004,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index aa11986..9e0e20a 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -198,7 +198,7 @@
if (machine_is_smdk2443())
smdk_nand_info.twrph0 = 50;
- s3c_device_nand.dev.platform_data = &smdk_nand_info;
+ s3c_nand_set_platdata(&smdk_nand_info);
platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 4f1b789..2d42efb 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
*
- * Copyright (c) 2006,2007,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f046f8c..f65192d 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/dma.c
*
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright 2003-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 DMA core
@@ -1310,7 +1310,7 @@
int channel;
int ret;
- printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
+ printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n");
dma_channels = channels;
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index c776120..33d421d 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -1,6 +1,6 @@
/* arch/arm/plat-s3c/include/plat/cpu-freq.h
*
- * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index c2cef61..36aaa10 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -1,6 +1,31 @@
#ifndef _ARCH_MCI_H
#define _ARCH_MCI_H
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
struct s3c24xx_mci_pdata {
unsigned int no_wprotect : 1;
unsigned int no_detect : 1;
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
index 3bc0a21..1b0f4c3 100644
--- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -1,6 +1,6 @@
/* arch/arm/mach-s3c2410/include/mach/dma.h
*
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Samsung S3C24XX DMA support
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
index b7acf1a..ea8dea3 100644
--- a/arch/arm/plat-s3c24xx/irq-pm.c
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/irq-om.c
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index d02f5f0..ef0f521 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/irq.c
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index da0d321..663b280 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/pm-simtec.c
*
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://armlinux.simtec.co.uk/
@@ -35,7 +35,7 @@
#include <plat/pm.h>
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
/* pm_simtec_init
*
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 56e5253..3620dd2 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/pm.c
*
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C24XX Power Manager (Suspend-To-RAM) support
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index d0a3a14..963fb0b 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
*
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index fd45e47f..24993dc 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
*
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
index ae2e6c6..976002f 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
*
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
* Vincent Sanders <vince@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
index ff9443b..49f6503 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -1,6 +1,6 @@
/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
*
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
* Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index dde41f1..7937109 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
*
- * Copyright (c) 2004-2005,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 0902afd..a75c0c2 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/plat-s3c24xx/simtec-audio.c
new file mode 100644
index 0000000..6bc832e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/simtec-audio.c
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-s3c24xx/simtec-audio.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Audio setup for various Simtec S3C24XX implementations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/audio-simtec.h>
+#include <plat/devs.h>
+
+/* platform ops for audio */
+
+static void simtec_audio_startup_lrroute(void)
+{
+ unsigned int tmp;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ tmp = __raw_readb(BAST_VA_CTRL1);
+ tmp &= ~BAST_CPLD_CTRL1_LRMASK;
+ tmp |= BAST_CPLD_CTRL1_LRCDAC;
+ __raw_writeb(tmp, BAST_VA_CTRL1);
+
+ local_irq_restore(flags);
+}
+
+static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
+static char our_name[32];
+
+static struct platform_device simtec_audio_dev = {
+ .name = our_name,
+ .id = -1,
+ .dev = {
+ .parent = &s3c_device_iis.dev,
+ .platform_data = &simtec_audio_platdata,
+ },
+};
+
+int __init simtec_audio_add(const char *name, bool has_lr_routing,
+ struct s3c24xx_audio_simtec_pdata *spd)
+{
+ if (!name)
+ name = "tlv320aic23";
+
+ snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
+
+ /* copy platform data so the source can be __initdata */
+ if (spd)
+ simtec_audio_platdata = *spd;
+
+ if (has_lr_routing)
+ simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
+
+ platform_device_register(&s3c_device_iis);
+ platform_device_register(&simtec_audio_dev);
+ return 0;
+}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index b1fdd83..49796d2 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -107,6 +107,11 @@
.pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
.length = SZ_4K,
.type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_USB_HSPHY,
+ .pfn = __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+ .length = SZ_1K,
+ .type = MT_DEVICE,
},
};
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c
index e6e0843..74c0e83 100644
--- a/arch/arm/plat-s3c64xx/cpufreq.c
+++ b/arch/arm/plat-s3c64xx/cpufreq.c
@@ -19,6 +19,7 @@
static struct clk *armclk;
static struct regulator *vddarm;
+static unsigned long regulator_latency;
#ifdef CONFIG_CPU_S3C6410
struct s3c64xx_dvfs {
@@ -27,11 +28,10 @@
};
static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
- [0] = { 1000000, 1000000 },
- [1] = { 1000000, 1050000 },
- [2] = { 1050000, 1100000 },
- [3] = { 1050000, 1150000 },
- [4] = { 1250000, 1350000 },
+ [0] = { 1000000, 1150000 },
+ [1] = { 1050000, 1150000 },
+ [2] = { 1100000, 1150000 },
+ [3] = { 1200000, 1350000 },
};
static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
@@ -41,9 +41,9 @@
{ 1, 266000 },
{ 2, 333000 },
{ 2, 400000 },
- { 3, 532000 },
- { 3, 533000 },
- { 4, 667000 },
+ { 2, 532000 },
+ { 2, 533000 },
+ { 3, 667000 },
{ 0, CPUFREQ_TABLE_END },
};
#endif
@@ -141,7 +141,7 @@
}
#ifdef CONFIG_REGULATOR
-static void __init s3c64xx_cpufreq_constrain_voltages(void)
+static void __init s3c64xx_cpufreq_config_regulator(void)
{
int count, v, i, found;
struct cpufreq_frequency_table *freq;
@@ -150,11 +150,10 @@
count = regulator_count_voltages(vddarm);
if (count < 0) {
pr_err("cpufreq: Unable to check supported voltages\n");
- return;
}
freq = s3c64xx_freq_table;
- while (freq->frequency != CPUFREQ_TABLE_END) {
+ while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
if (freq->frequency == CPUFREQ_ENTRY_INVALID)
continue;
@@ -175,6 +174,10 @@
freq++;
}
+
+ /* Guess based on having to do an I2C/SPI write; in future we
+ * will be able to query the regulator performance here. */
+ regulator_latency = 1 * 1000 * 1000;
}
#endif
@@ -206,7 +209,7 @@
pr_err("cpufreq: Only frequency scaling available\n");
vddarm = NULL;
} else {
- s3c64xx_cpufreq_constrain_voltages();
+ s3c64xx_cpufreq_config_regulator();
}
#endif
@@ -217,8 +220,11 @@
/* Check for frequencies we can generate */
r = clk_round_rate(armclk, freq->frequency * 1000);
r /= 1000;
- if (r != freq->frequency)
+ if (r != freq->frequency) {
+ pr_debug("cpufreq: %dkHz unsupported by clock\n",
+ freq->frequency);
freq->frequency = CPUFREQ_ENTRY_INVALID;
+ }
/* If we have no regulator then assume startup
* frequency is the maximum we can support. */
@@ -230,9 +236,11 @@
policy->cur = clk_get_rate(armclk) / 1000;
- /* Pick a conservative guess in ns: we'll need ~1 I2C/SPI
- * write plus clock reprogramming. */
- policy->cpuinfo.transition_latency = 2 * 1000 * 1000;
+ /* Datasheet says PLL stabalisation time (if we were to use
+ * the PLLs, which we don't currently) is ~300us worst case,
+ * but add some fudge.
+ */
+ policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
if (ret != 0) {
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index 9285929..7785604 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -213,6 +213,11 @@
.get_pull = s3c_gpio_getpull_updown,
};
+int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+{
+ return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
static struct s3c_gpio_chip gpio_4bit[] = {
{
.base = S3C64XX_GPA_BASE,
@@ -269,10 +274,16 @@
.base = S3C64XX_GPM(0),
.ngpio = S3C64XX_GPIO_M_NR,
.label = "GPM",
+ .to_irq = s3c64xx_gpio2int_gpm,
},
},
};
+int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+{
+ return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+
static struct s3c_gpio_chip gpio_4bit2[] = {
{
.base = S3C64XX_GPH_BASE + 0x4,
@@ -297,6 +308,7 @@
.base = S3C64XX_GPL(0),
.ngpio = S3C64XX_GPIO_L_NR,
.label = "GPL",
+ .to_irq = s3c64xx_gpio2int_gpl,
},
},
};
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
index c47daf7..e22b49f 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
@@ -36,18 +36,18 @@
#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16)
#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16)
-#define S3C64XX_GPC4_I2S0_V40_DO (0x05 << 16)
+#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16)
#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16)
#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20)
#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20)
-#define S3C64XX_GPC5_I2S1_V40_DO (0x05 << 20)
+#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20)
#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20)
#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24)
#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24)
#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28)
-#define S3C64XX_GPC7_I2S2_V40_DO (0x05 << 28)
+#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28)
#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28)
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index f81b7b8..ebdf183 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -65,7 +65,7 @@
static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
{
int offs = eint_offset(irq);
- int pin;
+ int pin, pin_val;
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
@@ -109,7 +109,10 @@
return -1;
}
- shift = (offs / 2) * 4;
+ if (offs <= 15)
+ shift = (offs / 2) * 4;
+ else
+ shift = ((offs - 16) / 2) * 4;
mask = 0x7 << shift;
ctrl = __raw_readl(reg);
@@ -119,12 +122,18 @@
/* set the GPIO pin appropriately */
- if (offs < 23)
+ if (offs < 16) {
pin = S3C64XX_GPN(offs);
- else
+ pin_val = S3C_GPIO_SFN(2);
+ } else if (offs < 23) {
+ pin = S3C64XX_GPL(offs + 8 - 16);
+ pin_val = S3C_GPIO_SFN(3);
+ } else {
pin = S3C64XX_GPM(offs - 23);
+ pin_val = S3C_GPIO_SFN(3);
+ }
- s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(pin, pin_val);
return 0;
}
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
index 5417123..a58c0cc 100644
--- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -53,3 +53,23 @@
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
}
+
+void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S3C64XX_GPH(6 + width);
+
+ /* Set all the necessary GPH pins to special-function 1 */
+ for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ /* Set all the necessary GPC pins to special-function 1 */
+ for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index a8a711c..1608e62 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -15,6 +15,9 @@
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
+ select S3C_GPIO_CFG_S3C24XX
+ select S3C_GPIO_CFG_S3C64XX
+ select S5P_GPIO_CFG_S5PC1XX
help
Base platform code for any Samsung S5PC1XX device
@@ -34,7 +37,12 @@
# platform specific device setup
-config S5PC100_SETUP_I2C0
+config S5PC1XX_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S5PC1XX with an 24bpp RGB display helper.
+
+config S5PC1XX_SETUP_I2C0
bool
default y
help
@@ -43,8 +51,14 @@
Note, currently since i2c0 is always compiled, this setup helper
is always compiled with it.
-config S5PC100_SETUP_I2C1
+config S5PC1XX_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
+
+config S5PC1XX_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index f1ecb2c..278f268 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -13,7 +13,9 @@
obj-y += dev-uart.o
obj-y += cpu.o
-obj-y += irq.o
+obj-y += irq.o irq-gpio.o irq-eint.o
+obj-y += clock.o
+obj-y += gpiolib.o
# CPU support
@@ -22,5 +24,8 @@
# Device setup
-obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
+obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
new file mode 100644
index 0000000..26c21d8
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/clock.c
@@ -0,0 +1,728 @@
+/* linux/arch/arm/plat-s5pc1xx/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * S5PC1XX Base clock support
+ *
+ * Based on plat-s3c64xx/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-clock.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+struct clk clk_27m = {
+ .name = "clk_27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+ unsigned long flags;
+ u32 val;
+
+ /* can't rely on clock lock, this register has other usages */
+ local_irq_save(flags);
+
+ val = __raw_readl(S5PC100_CLKSRC1);
+ if (enable)
+ val |= S5PC100_CLKSRC1_CLK48M_MASK;
+ else
+ val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+ __raw_writel(val, S5PC100_CLKSRC1);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+struct clk clk_48m = {
+ .name = "clk_48m",
+ .id = -1,
+ .rate = 48000000,
+ .enable = clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+ .name = "clk_54m",
+ .id = -1,
+ .rate = 54000000,
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 0;
+}
+
+static int clk_dummy_enable(struct clk *clk, int enable)
+{
+ return 0;
+}
+
+struct clk clk_hd0 = {
+ .name = "hclkd0",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+ .enable = clk_dummy_enable,
+};
+
+struct clk clk_pd0 = {
+ .name = "pclkd0",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+ .enable = clk_dummy_enable,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ u32 con;
+
+ con = __raw_readl(reg);
+ if (enable)
+ con |= ctrlbit;
+ else
+ con &= ~ctrlbit;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk s5pc100_init_clocks_disable[] = {
+ {
+ .name = "dsi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_DSI,
+ }, {
+ .name = "csi",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_CSI,
+ }, {
+ .name = "ccan",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
+ }, {
+ .name = "ccan",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
+ }, {
+ .name = "keypad",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
+ }, {
+ .name = "hclkd2",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc100_clk_d20_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
+ }, {
+ .name = "iis-d2",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc100_clk_d20_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
+ },
+};
+
+static struct clk s5pc100_init_clocks[] = {
+ /* System1 (D0_0) devices */
+ {
+ .name = "intc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_INTC,
+ }, {
+ .name = "tzic",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
+ }, {
+ .name = "cf-ata",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
+ }, {
+ .name = "mdma",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
+ }, {
+ .name = "g2d",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_G2D,
+ }, {
+ .name = "secss",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
+ }, {
+ .name = "cssys",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
+ },
+
+ /* Memory (D0_1) devices */
+ {
+ .name = "dmc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_DMC,
+ }, {
+ .name = "sromc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
+ }, {
+ .name = "onenand",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
+ }, {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
+ }, {
+ .name = "intmem",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
+ }, {
+ .name = "ebi",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_EBI,
+ },
+
+ /* System2 (D0_2) devices */
+ {
+ .name = "seckey",
+ .id = -1,
+ .parent = &clk_pd0,
+ .enable = s5pc100_clk_d02_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
+ }, {
+ .name = "sdm",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc100_clk_d02_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D02_SDM,
+ },
+
+ /* File (D1_0) devices */
+ {
+ .name = "pdma",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
+ }, {
+ .name = "pdma",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
+ }, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
+ }, {
+ .name = "modem",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc100_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
+ },
+
+ /* Multimedia1 (D1_1) devices */
+ {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_LCD,
+ }, {
+ .name = "rotator",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
+ }, {
+ .name = "fimc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
+ }, {
+ .name = "fimc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
+ }, {
+ .name = "fimc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
+ }, {
+ .name = "jpeg",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
+ }, {
+ .name = "g3d",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_G3D,
+ },
+
+ /* Multimedia2 (D1_2) devices */
+ {
+ .name = "tv",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_TV,
+ }, {
+ .name = "vp",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_VP,
+ }, {
+ .name = "mixer",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
+ }, {
+ .name = "hdmi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
+ }, {
+ .name = "mfc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_MFC,
+ },
+
+ /* System (D1_3) devices */
+ {
+ .name = "chipid",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
+ }, {
+ .name = "apc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_APC,
+ }, {
+ .name = "iec",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_IEC,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_PWM,
+ }, {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_WDT,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_RTC,
+ },
+
+ /* Connectivity (D1_4) devices */
+ {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART3,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_IIC,
+ }, {
+ .name = "hdmi-i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
+ }, {
+ .name = "spi",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
+ }, {
+ .name = "irda",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
+ }, {
+ .name = "hsitx",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
+ }, {
+ .name = "hsirx",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
+ },
+
+ /* Audio (D1_5) devices */
+ {
+ .name = "iis",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
+ }, {
+ .name = "iis",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
+ }, {
+ .name = "iis",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
+ }, {
+ .name = "ac97",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_AC97,
+ }, {
+ .name = "pcm",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
+ }, {
+ .name = "pcm",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
+ }, {
+ .name = "spdif",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
+ }, {
+ .name = "cg",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc100_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_CG,
+ },
+
+ /* Audio (D2_0) devices: all disabled */
+
+ /* Special Clocks 0 */
+ {
+ .name = "sclk_hpm",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_HPM,
+ }, {
+ .name = "sclk_onenand",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
+ }, {
+ .name = "spi_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
+ }, {
+ .name = "spi_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
+ }, {
+ .name = "spi_48",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
+ }, {
+ .name = "mmc_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
+ }, {
+ .name = "mmc_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
+ }, {
+ .name = "mmc_48",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
+ },
+ /* Special Clocks 1 */
+};
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_epll,
+ &clk_27m,
+ &clk_48m,
+ &clk_54m,
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+ int size;
+
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ clkp = s5pc100_init_clocks;
+ size = ARRAY_SIZE(s5pc100_init_clocks);
+
+ for (ptr = 0; ptr < size; ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ clkp = s5pc100_init_clocks_disable;
+ size = ARRAY_SIZE(s5pc100_init_clocks_disable);
+
+ for (ptr = 0; ptr < size; ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
index 715a733..02baeaa 100644
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -55,6 +55,16 @@
static struct map_desc s5pc1xx_iodesc[] __initdata = {
{
+ .virtual = (unsigned long)S5PC1XX_VA_CLK_OTHER,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_GPIO,
+ .pfn = __phys_to_pfn(S5PC100_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
.virtual = (unsigned long)S5PC1XX_VA_CHIPID,
.pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID),
.length = SZ_16,
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
new file mode 100644
index 0000000..bba675d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpio-config.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * S5PC1XX GPIO Configuration.
+ *
+ * Based on plat-s3c64xx/gpio-config.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/gpio-core.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ void __iomem *reg;
+ int shift = off * 2;
+ u32 drvstr;
+
+ if (!chip)
+ return -EINVAL;
+
+ reg = chip->base + 0x0C;
+
+ drvstr = __raw_readl(reg);
+ drvstr = 0xffff & (0x3 << shift);
+ drvstr = drvstr >> shift;
+
+ return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+ s5p_gpio_drvstr_t drvstr)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ void __iomem *reg;
+ int shift = off * 2;
+ u32 tmp;
+
+ if (!chip)
+ return -EINVAL;
+
+ reg = chip->base + 0x0C;
+
+ tmp = __raw_readl(reg);
+ tmp |= drvstr << shift;
+
+ __raw_writel(tmp, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
new file mode 100644
index 0000000..facb410
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpiolib.c
@@ -0,0 +1,503 @@
+/*
+ * arch/arm/plat-s5pc1xx/gpiolib.c
+ *
+ * Copyright 2009 Samsung Electronics Co
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC1XX - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/gpio-core.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/regs-gpio.h>
+
+/* S5PC100 GPIO bank summary:
+ *
+ * Bank GPIOs Style INT Type
+ * A0 8 4Bit GPIO_INT0
+ * A1 5 4Bit GPIO_INT1
+ * B 8 4Bit GPIO_INT2
+ * C 5 4Bit GPIO_INT3
+ * D 7 4Bit GPIO_INT4
+ * E0 8 4Bit GPIO_INT5
+ * E1 6 4Bit GPIO_INT6
+ * F0 8 4Bit GPIO_INT7
+ * F1 8 4Bit GPIO_INT8
+ * F2 8 4Bit GPIO_INT9
+ * F3 4 4Bit GPIO_INT10
+ * G0 8 4Bit GPIO_INT11
+ * G1 3 4Bit GPIO_INT12
+ * G2 7 4Bit GPIO_INT13
+ * G3 7 4Bit GPIO_INT14
+ * H0 8 4Bit WKUP_INT
+ * H1 8 4Bit WKUP_INT
+ * H2 8 4Bit WKUP_INT
+ * H3 8 4Bit WKUP_INT
+ * I 8 4Bit GPIO_INT15
+ * J0 8 4Bit GPIO_INT16
+ * J1 5 4Bit GPIO_INT17
+ * J2 8 4Bit GPIO_INT18
+ * J3 8 4Bit GPIO_INT19
+ * J4 4 4Bit GPIO_INT20
+ * K0 8 4Bit None
+ * K1 6 4Bit None
+ * K2 8 4Bit None
+ * K3 8 4Bit None
+ * L0 8 4Bit None
+ * L1 8 4Bit None
+ * L2 8 4Bit None
+ * L3 8 4Bit None
+ */
+
+#define OFF_GPCON (0x00)
+#define OFF_GPDAT (0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+#if 1
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The s5pc1xx_gpiolib routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ * gpio n: 4 bits starting at (4*n)
+ * 0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ * bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+ */
+
+static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+
+ con = __raw_readl(base + OFF_GPCON);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, base + OFF_GPCON);
+
+ gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+ return 0;
+}
+
+static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ unsigned long con;
+ unsigned long dat;
+
+ con = __raw_readl(base + OFF_GPCON);
+ con &= ~(0xf << con_4bit_shift(offset));
+ con |= 0x1 << con_4bit_shift(offset);
+
+ dat = __raw_readl(base + OFF_GPDAT);
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(dat, base + OFF_GPDAT);
+ __raw_writel(con, base + OFF_GPCON);
+ __raw_writel(dat, base + OFF_GPDAT);
+
+ gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+ return 0;
+}
+
+static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ return S3C_IRQ_GPIO(chip->base + offset);
+}
+
+static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
+{
+ int base;
+
+ base = chip->base - S5PC100_GPH0(0);
+ if (base == 0)
+ return IRQ_EINT(offset);
+ base = chip->base - S5PC100_GPH1(0);
+ if (base == 0)
+ return IRQ_EINT(8 + offset);
+ base = chip->base - S5PC100_GPH2(0);
+ if (base == 0)
+ return IRQ_EINT(16 + offset);
+ base = chip->base - S5PC100_GPH3(0);
+ if (base == 0)
+ return IRQ_EINT(24 + offset);
+ return -EINVAL;
+}
+
+static struct s3c_gpio_cfg gpio_cfg = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_eint = {
+ .cfg_eint = 0xf,
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
+ {
+ .base = S5PC100_GPA0_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPA0(0),
+ .ngpio = S5PC100_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .base = S5PC100_GPA1_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPA1(0),
+ .ngpio = S5PC100_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .base = S5PC100_GPB_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPB(0),
+ .ngpio = S5PC100_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .base = S5PC100_GPC_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPC(0),
+ .ngpio = S5PC100_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .base = S5PC100_GPD_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPD(0),
+ .ngpio = S5PC100_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .base = S5PC100_GPE0_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPE0(0),
+ .ngpio = S5PC100_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .base = S5PC100_GPE1_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPE1(0),
+ .ngpio = S5PC100_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .base = S5PC100_GPF0_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPF0(0),
+ .ngpio = S5PC100_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .base = S5PC100_GPF1_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPF1(0),
+ .ngpio = S5PC100_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .base = S5PC100_GPF2_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPF2(0),
+ .ngpio = S5PC100_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .base = S5PC100_GPF3_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPF3(0),
+ .ngpio = S5PC100_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ }, {
+ .base = S5PC100_GPG0_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPG0(0),
+ .ngpio = S5PC100_GPIO_G0_NR,
+ .label = "GPG0",
+ },
+ }, {
+ .base = S5PC100_GPG1_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPG1(0),
+ .ngpio = S5PC100_GPIO_G1_NR,
+ .label = "GPG1",
+ },
+ }, {
+ .base = S5PC100_GPG2_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPG2(0),
+ .ngpio = S5PC100_GPIO_G2_NR,
+ .label = "GPG2",
+ },
+ }, {
+ .base = S5PC100_GPG3_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPG3(0),
+ .ngpio = S5PC100_GPIO_G3_NR,
+ .label = "GPG3",
+ },
+ }, {
+ .base = S5PC100_GPH0_BASE,
+ .config = &gpio_cfg_eint,
+ .chip = {
+ .base = S5PC100_GPH0(0),
+ .ngpio = S5PC100_GPIO_H0_NR,
+ .label = "GPH0",
+ },
+ }, {
+ .base = S5PC100_GPH1_BASE,
+ .config = &gpio_cfg_eint,
+ .chip = {
+ .base = S5PC100_GPH1(0),
+ .ngpio = S5PC100_GPIO_H1_NR,
+ .label = "GPH1",
+ },
+ }, {
+ .base = S5PC100_GPH2_BASE,
+ .config = &gpio_cfg_eint,
+ .chip = {
+ .base = S5PC100_GPH2(0),
+ .ngpio = S5PC100_GPIO_H2_NR,
+ .label = "GPH2",
+ },
+ }, {
+ .base = S5PC100_GPH3_BASE,
+ .config = &gpio_cfg_eint,
+ .chip = {
+ .base = S5PC100_GPH3(0),
+ .ngpio = S5PC100_GPIO_H3_NR,
+ .label = "GPH3",
+ },
+ }, {
+ .base = S5PC100_GPI_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPI(0),
+ .ngpio = S5PC100_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S5PC100_GPJ0_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPJ0(0),
+ .ngpio = S5PC100_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .base = S5PC100_GPJ1_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPJ1(0),
+ .ngpio = S5PC100_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .base = S5PC100_GPJ2_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPJ2(0),
+ .ngpio = S5PC100_GPIO_J2_NR,
+ .label = "GPJ2",
+ },
+ }, {
+ .base = S5PC100_GPJ3_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPJ3(0),
+ .ngpio = S5PC100_GPIO_J3_NR,
+ .label = "GPJ3",
+ },
+ }, {
+ .base = S5PC100_GPJ4_BASE,
+ .config = &gpio_cfg,
+ .chip = {
+ .base = S5PC100_GPJ4(0),
+ .ngpio = S5PC100_GPIO_J4_NR,
+ .label = "GPJ4",
+ },
+ }, {
+ .base = S5PC100_GPK0_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPK0(0),
+ .ngpio = S5PC100_GPIO_K0_NR,
+ .label = "GPK0",
+ },
+ }, {
+ .base = S5PC100_GPK1_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPK1(0),
+ .ngpio = S5PC100_GPIO_K1_NR,
+ .label = "GPK1",
+ },
+ }, {
+ .base = S5PC100_GPK2_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPK2(0),
+ .ngpio = S5PC100_GPIO_K2_NR,
+ .label = "GPK2",
+ },
+ }, {
+ .base = S5PC100_GPK3_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPK3(0),
+ .ngpio = S5PC100_GPIO_K3_NR,
+ .label = "GPK3",
+ },
+ }, {
+ .base = S5PC100_GPL0_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPL0(0),
+ .ngpio = S5PC100_GPIO_L0_NR,
+ .label = "GPL0",
+ },
+ }, {
+ .base = S5PC100_GPL1_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPL1(0),
+ .ngpio = S5PC100_GPIO_L1_NR,
+ .label = "GPL1",
+ },
+ }, {
+ .base = S5PC100_GPL2_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPL2(0),
+ .ngpio = S5PC100_GPIO_L2_NR,
+ .label = "GPL2",
+ },
+ }, {
+ .base = S5PC100_GPL3_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPL3(0),
+ .ngpio = S5PC100_GPIO_L3_NR,
+ .label = "GPL3",
+ },
+ }, {
+ .base = S5PC100_GPL4_BASE,
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PC100_GPL4(0),
+ .ngpio = S5PC100_GPIO_L4_NR,
+ .label = "GPL4",
+ },
+ },
+};
+
+/* FIXME move from irq-gpio.c */
+extern struct irq_chip s5pc1xx_gpioint;
+extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
+
+static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
+{
+ chip->chip.direction_input = s5pc1xx_gpiolib_input;
+ chip->chip.direction_output = s5pc1xx_gpiolib_output;
+ chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+
+ /* Interrupt */
+ if (chip->config == &gpio_cfg) {
+ int i, irq;
+
+ chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
+
+ for (i = 0; i < chip->chip.ngpio; i++) {
+ irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
+ set_irq_chip(irq, &s5pc1xx_gpioint);
+ set_irq_data(irq, &chip->chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+ } else if (chip->config == &gpio_cfg_eint)
+ chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
+}
+
+static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
+ int nr_chips,
+ void (*fn)(struct s3c_gpio_chip *))
+{
+ for (; nr_chips > 0; nr_chips--, chips++) {
+ if (fn)
+ (fn)(chips);
+ s3c_gpiolib_add(chips);
+ }
+}
+
+static __init int s5pc1xx_gpiolib_init(void)
+{
+ struct s3c_gpio_chip *chips;
+ int nr_chips;
+
+ chips = s5pc100_gpio_chips;
+ nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+
+ s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
+ /* Interrupt */
+ set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
+
+ return 0;
+}
+core_initcall(s5pc1xx_gpiolib_init);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
new file mode 100644
index 0000000..72ad59f
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
+ *
+ * Copyright 2009 Samsung Electronic
+ *
+ * S5PC1XX Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+#ifndef __GPIO_CFG_S5PC1XX_H
+#define __GPIO_CFG_S5PC1XX_H __FILE__
+
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
+
+#define S5P_GPIO_DRVSTR_LV1 0x00
+#define S5P_GPIO_DRVSTR_LV2 0x01
+#define S5P_GPIO_DRVSTR_LV3 0x10
+#define S5P_GPIO_DRVSTR_LV4 0x11
+
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
+
+extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+ s5p_gpio_drvstr_t drvstr);
+
+#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
new file mode 100644
index 0000000..33ad267
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * External Interrupt (GPH0 ~ GPH3) control register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5PC1XX_WKUP_INT_CON0_7 (S5PC1XX_EINT_BASE + 0x0)
+#define S5PC1XX_WKUP_INT_CON8_15 (S5PC1XX_EINT_BASE + 0x4)
+#define S5PC1XX_WKUP_INT_CON16_23 (S5PC1XX_EINT_BASE + 0x8)
+#define S5PC1XX_WKUP_INT_CON24_31 (S5PC1XX_EINT_BASE + 0xC)
+#define S5PC1XX_WKUP_INT_CON(x) (S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_FLTCON0_3 (S5PC1XX_EINT_BASE + 0x80)
+#define S5PC1XX_WKUP_INT_FLTCON4_7 (S5PC1XX_EINT_BASE + 0x84)
+#define S5PC1XX_WKUP_INT_FLTCON8_11 (S5PC1XX_EINT_BASE + 0x88)
+#define S5PC1XX_WKUP_INT_FLTCON12_15 (S5PC1XX_EINT_BASE + 0x8C)
+#define S5PC1XX_WKUP_INT_FLTCON16_19 (S5PC1XX_EINT_BASE + 0x90)
+#define S5PC1XX_WKUP_INT_FLTCON20_23 (S5PC1XX_EINT_BASE + 0x94)
+#define S5PC1XX_WKUP_INT_FLTCON24_27 (S5PC1XX_EINT_BASE + 0x98)
+#define S5PC1XX_WKUP_INT_FLTCON28_31 (S5PC1XX_EINT_BASE + 0x9C)
+#define S5PC1XX_WKUP_INT_FLTCON(x) (S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_MASK0_7 (S5PC1XX_EINT_BASE + 0x100)
+#define S5PC1XX_WKUP_INT_MASK8_15 (S5PC1XX_EINT_BASE + 0x104)
+#define S5PC1XX_WKUP_INT_MASK16_23 (S5PC1XX_EINT_BASE + 0x108)
+#define S5PC1XX_WKUP_INT_MASK24_31 (S5PC1XX_EINT_BASE + 0x10C)
+#define S5PC1XX_WKUP_INT_MASK(x) (S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_PEND0_7 (S5PC1XX_EINT_BASE + 0x140)
+#define S5PC1XX_WKUP_INT_PEND8_15 (S5PC1XX_EINT_BASE + 0x144)
+#define S5PC1XX_WKUP_INT_PEND16_23 (S5PC1XX_EINT_BASE + 0x148)
+#define S5PC1XX_WKUP_INT_PEND24_31 (S5PC1XX_EINT_BASE + 0x14C)
+#define S5PC1XX_WKUP_INT_PEND(x) (S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_LOWLEV (0x00)
+#define S5PC1XX_WKUP_INT_HILEV (0x01)
+#define S5PC1XX_WKUP_INT_FALLEDGE (0x02)
+#define S5PC1XX_WKUP_INT_RISEEDGE (0x03)
+#define S5PC1XX_WKUP_INT_BOTHEDGE (0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
index f07d8c3..ef87363 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -171,12 +171,21 @@
#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
+/* External interrupt */
#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1)
-#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x) S3C_EINT(x)
+#define S3C_EINT(x) (S3C_IRQ_EINT_BASE + (x - 16))
+#define IRQ_EINT(x) (x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
+#define IRQ_EINT_BIT(x) (x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
-#define NR_IRQS (IRQ_EINT(31)+1)
+/* GPIO interrupt */
+#define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1)
+#define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x))
+
+/*
+ * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
+ */
+#define NR_IRQS (S3C_IRQ_GPIO(320) + 1)
#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
index 75c8390..c5cc86e 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -13,68 +13,69 @@
#ifndef __PLAT_REGS_CLOCK_H
#define __PLAT_REGS_CLOCK_H __FILE__
-#define S5PC1XX_CLKREG(x) (S5PC1XX_VA_CLK + (x))
+#define S5PC100_CLKREG(x) (S5PC1XX_VA_CLK + (x))
+#define S5PC100_CLKREG_OTHER(x) (S5PC1XX_VA_CLK_OTHER + (x))
-#define S5PC1XX_APLL_LOCK S5PC1XX_CLKREG(0x00)
-#define S5PC1XX_MPLL_LOCK S5PC1XX_CLKREG(0x04)
-#define S5PC1XX_EPLL_LOCK S5PC1XX_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK S5PC1XX_CLKREG(0x0C)
+/* s5pc100 register for clock */
+#define S5PC100_APLL_LOCK S5PC100_CLKREG(0x00)
+#define S5PC100_MPLL_LOCK S5PC100_CLKREG(0x04)
+#define S5PC100_EPLL_LOCK S5PC100_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK S5PC100_CLKREG(0x0C)
-#define S5PC1XX_APLL_CON S5PC1XX_CLKREG(0x100)
-#define S5PC1XX_MPLL_CON S5PC1XX_CLKREG(0x104)
-#define S5PC1XX_EPLL_CON S5PC1XX_CLKREG(0x108)
-#define S5PC100_HPLL_CON S5PC1XX_CLKREG(0x10C)
+#define S5PC100_APLL_CON S5PC100_CLKREG(0x100)
+#define S5PC100_MPLL_CON S5PC100_CLKREG(0x104)
+#define S5PC100_EPLL_CON S5PC100_CLKREG(0x108)
+#define S5PC100_HPLL_CON S5PC100_CLKREG(0x10C)
-#define S5PC1XX_CLK_SRC0 S5PC1XX_CLKREG(0x200)
-#define S5PC1XX_CLK_SRC1 S5PC1XX_CLKREG(0x204)
-#define S5PC1XX_CLK_SRC2 S5PC1XX_CLKREG(0x208)
-#define S5PC1XX_CLK_SRC3 S5PC1XX_CLKREG(0x20C)
+#define S5PC100_CLKSRC0 S5PC100_CLKREG(0x200)
+#define S5PC100_CLKSRC1 S5PC100_CLKREG(0x204)
+#define S5PC100_CLKSRC2 S5PC100_CLKREG(0x208)
+#define S5PC100_CLKSRC3 S5PC100_CLKREG(0x20C)
-#define S5PC1XX_CLK_DIV0 S5PC1XX_CLKREG(0x300)
-#define S5PC1XX_CLK_DIV1 S5PC1XX_CLKREG(0x304)
-#define S5PC1XX_CLK_DIV2 S5PC1XX_CLKREG(0x308)
-#define S5PC1XX_CLK_DIV3 S5PC1XX_CLKREG(0x30C)
-#define S5PC1XX_CLK_DIV4 S5PC1XX_CLKREG(0x310)
+#define S5PC100_CLKDIV0 S5PC100_CLKREG(0x300)
+#define S5PC100_CLKDIV1 S5PC100_CLKREG(0x304)
+#define S5PC100_CLKDIV2 S5PC100_CLKREG(0x308)
+#define S5PC100_CLKDIV3 S5PC100_CLKREG(0x30C)
+#define S5PC100_CLKDIV4 S5PC100_CLKREG(0x310)
-#define S5PC100_CLK_OUT S5PC1XX_CLKREG(0x400)
+#define S5PC100_CLK_OUT S5PC100_CLKREG(0x400)
-#define S5PC100_CLKGATE_D00 S5PC1XX_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01 S5PC1XX_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02 S5PC1XX_CLKREG(0x508)
+#define S5PC100_CLKGATE_D00 S5PC100_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01 S5PC100_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02 S5PC100_CLKREG(0x508)
-#define S5PC100_CLKGATE_D10 S5PC1XX_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11 S5PC1XX_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12 S5PC1XX_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13 S5PC1XX_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14 S5PC1XX_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15 S5PC1XX_CLKREG(0x534)
+#define S5PC100_CLKGATE_D10 S5PC100_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11 S5PC100_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12 S5PC100_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13 S5PC100_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14 S5PC100_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15 S5PC100_CLKREG(0x534)
-#define S5PC100_CLKGATE_D20 S5PC1XX_CLKREG(0x540)
+#define S5PC100_CLKGATE_D20 S5PC100_CLKREG(0x540)
-#define S5PC100_SCLKGATE0 S5PC1XX_CLKREG(0x560)
-#define S5PC100_SCLKGATE1 S5PC1XX_CLKREG(0x564)
+#define S5PC100_SCLKGATE0 S5PC100_CLKREG(0x560)
+#define S5PC100_SCLKGATE1 S5PC100_CLKREG(0x564)
-#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200)
-
-#define S5PC1XX_EPLL_EN (1<<31)
-#define S5PC1XX_EPLL_MASK 0xffffffff
-#define S5PC1XX_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
+/* EPLL_CON */
+#define S5PC100_EPLL_EN (1<<31)
+#define S5PC100_EPLL_MASK 0xffffffff
+#define S5PC100_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
/* CLKSRC0 */
-#define S5PC1XX_CLKSRC0_APLL_MASK (0x1<<0)
-#define S5PC1XX_CLKSRC0_APLL_SHIFT (0)
-#define S5PC1XX_CLKSRC0_MPLL_MASK (0x1<<4)
-#define S5PC1XX_CLKSRC0_MPLL_SHIFT (4)
-#define S5PC1XX_CLKSRC0_EPLL_MASK (0x1<<8)
-#define S5PC1XX_CLKSRC0_EPLL_SHIFT (8)
+#define S5PC100_CLKSRC0_APLL_MASK (0x1<<0)
+#define S5PC100_CLKSRC0_APLL_SHIFT (0)
+#define S5PC100_CLKSRC0_MPLL_MASK (0x1<<4)
+#define S5PC100_CLKSRC0_MPLL_SHIFT (4)
+#define S5PC100_CLKSRC0_EPLL_MASK (0x1<<8)
+#define S5PC100_CLKSRC0_EPLL_SHIFT (8)
#define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12)
#define S5PC100_CLKSRC0_HPLL_SHIFT (12)
#define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16)
#define S5PC100_CLKSRC0_AMMUX_SHIFT (16)
#define S5PC100_CLKSRC0_HREF_MASK (0x1<<20)
#define S5PC100_CLKSRC0_HREF_SHIFT (20)
-#define S5PC1XX_CLKSRC0_ONENAND_MASK (0x1<<24)
-#define S5PC1XX_CLKSRC0_ONENAND_SHIFT (24)
+#define S5PC100_CLKSRC0_ONENAND_MASK (0x1<<24)
+#define S5PC100_CLKSRC0_ONENAND_SHIFT (24)
/* CLKSRC1 */
@@ -127,10 +128,9 @@
#define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24)
#define S5PC100_CLKSRC3_SPDIF_SHIFT (24)
-
/* CLKDIV0 */
-#define S5PC1XX_CLKDIV0_APLL_MASK (0x1<<0)
-#define S5PC1XX_CLKDIV0_APLL_SHIFT (0)
+#define S5PC100_CLKDIV0_APLL_MASK (0x1<<0)
+#define S5PC100_CLKDIV0_APLL_SHIFT (0)
#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4)
#define S5PC100_CLKDIV0_ARM_SHIFT (4)
#define S5PC100_CLKDIV0_D0_MASK (0x7<<8)
@@ -141,8 +141,8 @@
#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
/* CLKDIV1 */
-#define S5PC100_CLKDIV1_AM_MASK (0x7<<0)
-#define S5PC100_CLKDIV1_AM_SHIFT (0)
+#define S5PC100_CLKDIV1_APLL2_MASK (0x7<<0)
+#define S5PC100_CLKDIV1_APLL2_SHIFT (0)
#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
#define S5PC100_CLKDIV1_MPLL_SHIFT (4)
#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8)
@@ -202,7 +202,6 @@
#define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20)
#define S5PC100_CLKDIV4_AUDIO2_SHIFT (20)
-
/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
#define S5PC100_CLKGATE_D00_INTC (1<<0)
#define S5PC100_CLKGATE_D00_TZIC (1<<1)
@@ -295,8 +294,8 @@
#define S5PC100_CLKGATE_D20_I2SD2 (1<<1)
/* Special Clock Gate 0 Registers */
-#define S5PC1XX_CLKGATE_SCLK0_HPM (1<<0)
-#define S5PC1XX_CLKGATE_SCLK0_PWI (1<<1)
+#define S5PC100_CLKGATE_SCLK0_HPM (1<<0)
+#define S5PC100_CLKGATE_SCLK0_PWI (1<<1)
#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2)
#define S5PC100_CLKGATE_SCLK0_UART (1<<3)
#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4)
@@ -329,89 +328,28 @@
#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11)
#define S5PC100_CLKGATE_SCLK1_CAM (1<<12)
-/* register for power management */
-#define S5PC100_PWR_CFG S5PC1XX_CLKREG(0x8000)
-#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_CLKREG(0x8004)
-#define S5PC100_NORMAL_CFG S5PC1XX_CLKREG(0x8010)
-#define S5PC100_STOP_CFG S5PC1XX_CLKREG(0x8014)
-#define S5PC100_SLEEP_CFG S5PC1XX_CLKREG(0x8018)
-#define S5PC100_STOP_MEM_CFG S5PC1XX_CLKREG(0x801C)
-#define S5PC100_OSC_FREQ S5PC1XX_CLKREG(0x8100)
-#define S5PC100_OSC_STABLE S5PC1XX_CLKREG(0x8104)
-#define S5PC100_PWR_STABLE S5PC1XX_CLKREG(0x8108)
-#define S5PC100_MTC_STABLE S5PC1XX_CLKREG(0x8110)
-#define S5PC100_CLAMP_STABLE S5PC1XX_CLKREG(0x8114)
-#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200)
-#define S5PC100_RST_STAT S5PC1XX_CLKREG(0x8300)
-#define S5PC100_WAKEUP_STAT S5PC1XX_CLKREG(0x8304)
-#define S5PC100_BLK_PWR_STAT S5PC1XX_CLKREG(0x8308)
-#define S5PC100_INFORM0 S5PC1XX_CLKREG(0x8400)
-#define S5PC100_INFORM1 S5PC1XX_CLKREG(0x8404)
-#define S5PC100_INFORM2 S5PC1XX_CLKREG(0x8408)
-#define S5PC100_INFORM3 S5PC1XX_CLKREG(0x840C)
-#define S5PC100_INFORM4 S5PC1XX_CLKREG(0x8410)
-#define S5PC100_INFORM5 S5PC1XX_CLKREG(0x8414)
-#define S5PC100_INFORM6 S5PC1XX_CLKREG(0x8418)
-#define S5PC100_INFORM7 S5PC1XX_CLKREG(0x841C)
-#define S5PC100_DCGIDX_MAP0 S5PC1XX_CLKREG(0x8500)
-#define S5PC100_DCGIDX_MAP1 S5PC1XX_CLKREG(0x8504)
-#define S5PC100_DCGIDX_MAP2 S5PC1XX_CLKREG(0x8508)
-#define S5PC100_DCGPERF_MAP0 S5PC1XX_CLKREG(0x850C)
-#define S5PC100_DCGPERF_MAP1 S5PC1XX_CLKREG(0x8510)
-#define S5PC100_DVCIDX_MAP S5PC1XX_CLKREG(0x8514)
-#define S5PC100_FREQ_CPU S5PC1XX_CLKREG(0x8518)
-#define S5PC100_FREQ_DPM S5PC1XX_CLKREG(0x851C)
-#define S5PC100_DVSEMCLK_EN S5PC1XX_CLKREG(0x8520)
-#define S5PC100_APLL_CON_L8 S5PC1XX_CLKREG(0x8600)
-#define S5PC100_APLL_CON_L7 S5PC1XX_CLKREG(0x8604)
-#define S5PC100_APLL_CON_L6 S5PC1XX_CLKREG(0x8608)
-#define S5PC100_APLL_CON_L5 S5PC1XX_CLKREG(0x860C)
-#define S5PC100_APLL_CON_L4 S5PC1XX_CLKREG(0x8610)
-#define S5PC100_APLL_CON_L3 S5PC1XX_CLKREG(0x8614)
-#define S5PC100_APLL_CON_L2 S5PC1XX_CLKREG(0x8618)
-#define S5PC100_APLL_CON_L1 S5PC1XX_CLKREG(0x861C)
-#define S5PC100_IEM_CONTROL S5PC1XX_CLKREG(0x8620)
-#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_CLKREG(0x8700)
-#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_CLKREG(0x8704)
-#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_CLKREG(0x8708)
-#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_CLKREG(0x870C)
-#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_CLKREG(0x8710)
-#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_CLKREG(0x8714)
-#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_CLKREG(0x8718)
-#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_CLKREG(0x871C)
-#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_CLKREG(0x8724)
+#define S5PC100_SWRESET S5PC100_CLKREG_OTHER(0x000)
+#define S5PC100_OND_SWRESET S5PC100_CLKREG_OTHER(0x008)
+#define S5PC100_GEN_CTRL S5PC100_CLKREG_OTHER(0x100)
+#define S5PC100_GEN_STATUS S5PC100_CLKREG_OTHER(0x104)
+#define S5PC100_MEM_SYS_CFG S5PC100_CLKREG_OTHER(0x200)
+#define S5PC100_CAM_MUX_SEL S5PC100_CLKREG_OTHER(0x300)
+#define S5PC100_MIXER_OUT_SEL S5PC100_CLKREG_OTHER(0x304)
+#define S5PC100_LPMP_MODE_SEL S5PC100_CLKREG_OTHER(0x308)
+#define S5PC100_MIPI_PHY_CON0 S5PC100_CLKREG_OTHER(0x400)
+#define S5PC100_MIPI_PHY_CON1 S5PC100_CLKREG_OTHER(0x414)
+#define S5PC100_HDMI_PHY_CON0 S5PC100_CLKREG_OTHER(0x420)
-#define S5PC100_SWRESET S5PC1XX_CLKREG(0x100000)
-#define S5PC100_OND_SWRESET S5PC1XX_CLKREG(0x100008)
-#define S5PC100_GEN_CTRL S5PC1XX_CLKREG(0x100100)
-#define S5PC100_GEN_STATUS S5PC1XX_CLKREG(0x100104)
-#define S5PC100_MEM_SYS_CFG S5PC1XX_CLKREG(0x100200)
-#define S5PC100_CAM_MUX_SEL S5PC1XX_CLKREG(0x100300)
-#define S5PC100_MIXER_OUT_SEL S5PC1XX_CLKREG(0x100304)
-#define S5PC100_LPMP_MODE_SEL S5PC1XX_CLKREG(0x100308)
-#define S5PC100_MIPI_PHY_CON0 S5PC1XX_CLKREG(0x100400)
-#define S5PC100_MIPI_PHY_CON1 S5PC1XX_CLKREG(0x100414)
-#define S5PC100_HDMI_PHY_CON0 S5PC1XX_CLKREG(0x100420)
-
-#define S5PC100_CFG_WFI_CLEAN (~(3<<5))
-#define S5PC100_CFG_WFI_IDLE (1<<5)
-#define S5PC100_CFG_WFI_STOP (2<<5)
-#define S5PC100_CFG_WFI_SLEEP (3<<5)
-
+#define S5PC100_SWRESET_RESETVAL 0xc100
#define S5PC100_OTHER_SYS_INT 24
#define S5PC100_OTHER_STA_TYPE 23
#define STA_TYPE_EXPON 0
#define STA_TYPE_SFR 1
-#define S5PC100_PWR_STA_EXP_SCALE 0
-#define S5PC100_PWR_STA_CNT 4
-
-#define S5PC100_PWR_STABLE_COUNT 85500
-
#define S5PC100_SLEEP_CFG_OSC_EN 0
/* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
+#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28)
/* MIPI D-PHY Control Register 0 */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
new file mode 100644
index 0000000..43c7bc8
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H
+#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* S5PC100 */
+#define S5PC100_GPIO_BASE S5PC1XX_VA_GPIO
+#define S5PC100_GPA0_BASE (S5PC100_GPIO_BASE + 0x0000)
+#define S5PC100_GPA1_BASE (S5PC100_GPIO_BASE + 0x0020)
+#define S5PC100_GPB_BASE (S5PC100_GPIO_BASE + 0x0040)
+#define S5PC100_GPC_BASE (S5PC100_GPIO_BASE + 0x0060)
+#define S5PC100_GPD_BASE (S5PC100_GPIO_BASE + 0x0080)
+#define S5PC100_GPE0_BASE (S5PC100_GPIO_BASE + 0x00A0)
+#define S5PC100_GPE1_BASE (S5PC100_GPIO_BASE + 0x00C0)
+#define S5PC100_GPF0_BASE (S5PC100_GPIO_BASE + 0x00E0)
+#define S5PC100_GPF1_BASE (S5PC100_GPIO_BASE + 0x0100)
+#define S5PC100_GPF2_BASE (S5PC100_GPIO_BASE + 0x0120)
+#define S5PC100_GPF3_BASE (S5PC100_GPIO_BASE + 0x0140)
+#define S5PC100_GPG0_BASE (S5PC100_GPIO_BASE + 0x0160)
+#define S5PC100_GPG1_BASE (S5PC100_GPIO_BASE + 0x0180)
+#define S5PC100_GPG2_BASE (S5PC100_GPIO_BASE + 0x01A0)
+#define S5PC100_GPG3_BASE (S5PC100_GPIO_BASE + 0x01C0)
+#define S5PC100_GPH0_BASE (S5PC100_GPIO_BASE + 0x0C00)
+#define S5PC100_GPH1_BASE (S5PC100_GPIO_BASE + 0x0C20)
+#define S5PC100_GPH2_BASE (S5PC100_GPIO_BASE + 0x0C40)
+#define S5PC100_GPH3_BASE (S5PC100_GPIO_BASE + 0x0C60)
+#define S5PC100_GPI_BASE (S5PC100_GPIO_BASE + 0x01E0)
+#define S5PC100_GPJ0_BASE (S5PC100_GPIO_BASE + 0x0200)
+#define S5PC100_GPJ1_BASE (S5PC100_GPIO_BASE + 0x0220)
+#define S5PC100_GPJ2_BASE (S5PC100_GPIO_BASE + 0x0240)
+#define S5PC100_GPJ3_BASE (S5PC100_GPIO_BASE + 0x0260)
+#define S5PC100_GPJ4_BASE (S5PC100_GPIO_BASE + 0x0280)
+#define S5PC100_GPK0_BASE (S5PC100_GPIO_BASE + 0x02A0)
+#define S5PC100_GPK1_BASE (S5PC100_GPIO_BASE + 0x02C0)
+#define S5PC100_GPK2_BASE (S5PC100_GPIO_BASE + 0x02E0)
+#define S5PC100_GPK3_BASE (S5PC100_GPIO_BASE + 0x0300)
+#define S5PC100_GPL0_BASE (S5PC100_GPIO_BASE + 0x0320)
+#define S5PC100_GPL1_BASE (S5PC100_GPIO_BASE + 0x0340)
+#define S5PC100_GPL2_BASE (S5PC100_GPIO_BASE + 0x0360)
+#define S5PC100_GPL3_BASE (S5PC100_GPIO_BASE + 0x0380)
+#define S5PC100_GPL4_BASE (S5PC100_GPIO_BASE + 0x03A0)
+#define S5PC100_EINT_BASE (S5PC100_GPIO_BASE + 0x0E00)
+
+#define S5PC100_UHOST (S5PC100_GPIO_BASE + 0x0B68)
+#define S5PC100_PDNEN (S5PC100_GPIO_BASE + 0x0F80)
+
+/* PDNEN */
+#define S5PC100_PDNEN_CFG_PDNEN (1 << 1)
+#define S5PC100_PDNEN_CFG_AUTO (0 << 1)
+#define S5PC100_PDNEN_POWERDOWN (1 << 0)
+#define S5PC100_PDNEN_NORMAL (0 << 0)
+
+/* Common part */
+/* External interrupt base is same at both s5pc100 and s5pc110 */
+#define S5PC1XX_EINT_BASE (S5PC100_EINT_BASE)
+
+#define S5PC100_GPx_INPUT(__gpio) (0x0 << ((__gpio) * 4))
+#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
+#define S5PC100_GPx_CONMASK(__gpio) (0xf << ((__gpio) * 4))
+
+#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
new file mode 100644
index 0000000..02ffa49
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
@@ -0,0 +1,84 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Jongse Won <jongse.won@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S5PC1XX_PWRREG(x) (S5PC1XX_VA_PWR + (x))
+
+/* s5pc100 (0xE0108000) register for power management */
+#define S5PC100_PWR_CFG S5PC1XX_PWRREG(0x0)
+#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_PWRREG(0x4)
+#define S5PC100_NORMAL_CFG S5PC1XX_PWRREG(0x10)
+#define S5PC100_STOP_CFG S5PC1XX_PWRREG(0x14)
+#define S5PC100_SLEEP_CFG S5PC1XX_PWRREG(0x18)
+#define S5PC100_STOP_MEM_CFG S5PC1XX_PWRREG(0x1C)
+#define S5PC100_OSC_FREQ S5PC1XX_PWRREG(0x100)
+#define S5PC100_OSC_STABLE S5PC1XX_PWRREG(0x104)
+#define S5PC100_PWR_STABLE S5PC1XX_PWRREG(0x108)
+#define S5PC100_MTC_STABLE S5PC1XX_PWRREG(0x110)
+#define S5PC100_CLAMP_STABLE S5PC1XX_PWRREG(0x114)
+#define S5PC100_OTHERS S5PC1XX_PWRREG(0x200)
+#define S5PC100_RST_STAT S5PC1XX_PWRREG(0x300)
+#define S5PC100_WAKEUP_STAT S5PC1XX_PWRREG(0x304)
+#define S5PC100_BLK_PWR_STAT S5PC1XX_PWRREG(0x308)
+#define S5PC100_INFORM0 S5PC1XX_PWRREG(0x400)
+#define S5PC100_INFORM1 S5PC1XX_PWRREG(0x404)
+#define S5PC100_INFORM2 S5PC1XX_PWRREG(0x408)
+#define S5PC100_INFORM3 S5PC1XX_PWRREG(0x40C)
+#define S5PC100_INFORM4 S5PC1XX_PWRREG(0x410)
+#define S5PC100_INFORM5 S5PC1XX_PWRREG(0x414)
+#define S5PC100_INFORM6 S5PC1XX_PWRREG(0x418)
+#define S5PC100_INFORM7 S5PC1XX_PWRREG(0x41C)
+#define S5PC100_DCGIDX_MAP0 S5PC1XX_PWRREG(0x500)
+#define S5PC100_DCGIDX_MAP1 S5PC1XX_PWRREG(0x504)
+#define S5PC100_DCGIDX_MAP2 S5PC1XX_PWRREG(0x508)
+#define S5PC100_DCGPERF_MAP0 S5PC1XX_PWRREG(0x50C)
+#define S5PC100_DCGPERF_MAP1 S5PC1XX_PWRREG(0x510)
+#define S5PC100_DVCIDX_MAP S5PC1XX_PWRREG(0x514)
+#define S5PC100_FREQ_CPU S5PC1XX_PWRREG(0x518)
+#define S5PC100_FREQ_DPM S5PC1XX_PWRREG(0x51C)
+#define S5PC100_DVSEMCLK_EN S5PC1XX_PWRREG(0x520)
+#define S5PC100_APLL_CON_L8 S5PC1XX_PWRREG(0x600)
+#define S5PC100_APLL_CON_L7 S5PC1XX_PWRREG(0x604)
+#define S5PC100_APLL_CON_L6 S5PC1XX_PWRREG(0x608)
+#define S5PC100_APLL_CON_L5 S5PC1XX_PWRREG(0x60C)
+#define S5PC100_APLL_CON_L4 S5PC1XX_PWRREG(0x610)
+#define S5PC100_APLL_CON_L3 S5PC1XX_PWRREG(0x614)
+#define S5PC100_APLL_CON_L2 S5PC1XX_PWRREG(0x618)
+#define S5PC100_APLL_CON_L1 S5PC1XX_PWRREG(0x61C)
+#define S5PC100_IEM_CONTROL S5PC1XX_PWRREG(0x620)
+#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_PWRREG(0x700)
+#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_PWRREG(0x704)
+#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_PWRREG(0x708)
+#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_PWRREG(0x70C)
+#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_PWRREG(0x710)
+#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_PWRREG(0x714)
+#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_PWRREG(0x718)
+#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_PWRREG(0x71C)
+#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_PWRREG(0x724)
+
+/* PWR_CFG */
+#define S5PC100_PWRCFG_CFG_DEEP_IDLE (1 << 31)
+#define S5PC100_PWRCFG_CFG_WFI_MASK (3 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_IDLE (0 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE (1 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_STOP (2 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_SLEEP (3 << 5)
+
+/* SLEEP_CFG */
+#define S5PC100_SLEEP_OSC_EN_SLEEP (1 << 0)
+
+/* OTHERS */
+#define S5PC100_PMU_INT_DISABLE (1 << 24)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
index 45e2751..2531f34 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -35,10 +35,9 @@
extern struct clk clk_hd0;
extern struct clk clk_pd0;
extern struct clk clk_54m;
-extern struct clk clk_dout_mpll2;
extern void s5pc1xx_register_clocks(void);
-extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
new file mode 100644
index 0000000..373122f
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-eint.c
@@ -0,0 +1,281 @@
+/*
+ * linux/arch/arm/plat-s5pc1xx/irq-eint.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ * Kyungin Park <kyungmin.park@samsung.com>
+ *
+ * Based on plat-s3c64xx/irq-eint.c
+ *
+ * S5PC1XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-ext.h>
+#include <plat/pm.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-irqtype.h>
+
+/*
+ * bank is a group of external interrupt
+ * bank0 means EINT0 ... EINT7
+ * bank1 means EINT8 ... EINT15
+ * bank2 means EINT16 ... EINT23
+ * bank3 means EINT24 ... EINT31
+ */
+
+static inline int s3c_get_eint(unsigned int irq)
+{
+ int real;
+
+ if (irq < IRQ_EINT16_31)
+ real = (irq - IRQ_EINT0);
+ else
+ real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
+
+ return real;
+}
+
+static inline int s3c_get_bank(unsigned int irq)
+{
+ return s3c_get_eint(irq) >> 3;
+}
+
+static inline int s3c_eint_to_bit(unsigned int irq)
+{
+ int real, bit;
+
+ real = s3c_get_eint(irq);
+ bit = 1 << (real & (8 - 1));
+
+ return bit;
+}
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+ u32 mask;
+ u32 bank = s3c_get_bank(irq);
+
+ mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+ mask |= s3c_eint_to_bit(irq);
+ __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+ u32 mask;
+ u32 bank = s3c_get_bank(irq);
+
+ mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+ mask &= ~(s3c_eint_to_bit(irq));
+ __raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+ u32 bank = s3c_get_bank(irq);
+
+ __raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+ /* compiler should in-line these */
+ s3c_irq_eint_mask(irq);
+ s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+ u32 bank = s3c_get_bank(irq);
+ int real = s3c_get_eint(irq);
+ int gpio, shift, sfn;
+ u32 ctrl, con = 0;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+
+ case IRQ_TYPE_EDGE_RISING:
+ con = S5PC1XX_WKUP_INT_RISEEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_FALLING:
+ con = S5PC1XX_WKUP_INT_FALLEDGE;
+ break;
+
+ case IRQ_TYPE_EDGE_BOTH:
+ con = S5PC1XX_WKUP_INT_BOTHEDGE;
+ break;
+
+ case IRQ_TYPE_LEVEL_LOW:
+ con = S5PC1XX_WKUP_INT_LOWLEV;
+ break;
+
+ case IRQ_TYPE_LEVEL_HIGH:
+ con = S5PC1XX_WKUP_INT_HILEV;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ gpio = real & (8 - 1);
+ shift = gpio << 2;
+
+ ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
+ ctrl &= ~(0x7 << shift);
+ ctrl |= con << shift;
+ __raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
+
+ switch (real) {
+ case 0 ... 7:
+ gpio = S5PC100_GPH0(gpio);
+ break;
+ case 8 ... 15:
+ gpio = S5PC100_GPH1(gpio);
+ break;
+ case 16 ... 23:
+ gpio = S5PC100_GPH2(gpio);
+ break;
+ case 24 ... 31:
+ gpio = S5PC100_GPH3(gpio);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ sfn = S3C_GPIO_SFN(0x2);
+ s3c_gpio_cfgpin(gpio, sfn);
+
+ return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+ .name = "EINT",
+ .mask = s3c_irq_eint_mask,
+ .unmask = s3c_irq_eint_unmask,
+ .mask_ack = s3c_irq_eint_maskack,
+ .ack = s3c_irq_eint_ack,
+ .set_type = s3c_irq_eint_set_type,
+ .set_wake = s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from external interrupts,
+ * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+ u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
+ u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
+ unsigned int irq;
+
+ status &= ~mask;
+ status &= (1 << (end - start + 1)) - 1;
+
+ for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+ if (status & 1)
+ generic_handle_irq(irq);
+
+ status >>= 1;
+ }
+}
+
+static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_eint(16, 23);
+ s3c_irq_demux_eint(24, 31);
+}
+
+/*
+ * Handle EINT0 ... EINT15 at VIC directly
+ */
+static void s3c_irq_vic_eint_mask(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ unsigned int real;
+
+ s3c_irq_eint_mask(irq);
+ real = s3c_get_eint(irq);
+ writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s3c_irq_vic_eint_unmask(unsigned int irq)
+{
+ void __iomem *base = get_irq_chip_data(irq);
+ unsigned int real;
+
+ s3c_irq_eint_unmask(irq);
+ real = s3c_get_eint(irq);
+ writel(1 << real, base + VIC_INT_ENABLE);
+}
+
+static inline void s3c_irq_vic_eint_ack(unsigned int irq)
+{
+ u32 bit;
+ u32 bank = s3c_get_bank(irq);
+
+ bit = s3c_eint_to_bit(irq);
+ __raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_vic_eint_maskack(unsigned int irq)
+{
+ /* compiler should in-line these */
+ s3c_irq_vic_eint_mask(irq);
+ s3c_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s3c_irq_vic_eint = {
+ .name = "EINT",
+ .mask = s3c_irq_vic_eint_mask,
+ .unmask = s3c_irq_vic_eint_unmask,
+ .mask_ack = s3c_irq_vic_eint_maskack,
+ .ack = s3c_irq_vic_eint_ack,
+ .set_type = s3c_irq_eint_set_type,
+ .set_wake = s3c_irqext_wake,
+};
+
+static int __init s5pc1xx_init_irq_eint(void)
+{
+ int irq;
+
+ for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
+ set_irq_chip(irq, &s3c_irq_vic_eint);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+ set_irq_chip(irq, &s3c_irq_eint);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
+
+ return 0;
+}
+
+arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/plat-s5pc1xx/irq-gpio.c
new file mode 100644
index 0000000..fecca7a
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-gpio.c
@@ -0,0 +1,266 @@
+/*
+ * arch/arm/plat-s5pc1xx/irq-gpio.c
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ *
+ * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-cfg.h>
+
+#define S5PC1XX_GPIOREG(x) (S5PC1XX_VA_GPIO + (x))
+
+#define CON_OFFSET 0x700
+#define MASK_OFFSET 0x900
+#define PEND_OFFSET 0xA00
+#define CON_OFFSET_2 0xE00
+#define MASK_OFFSET_2 0xF00
+#define PEND_OFFSET_2 0xF40
+
+#define GPIOINT_LEVEL_LOW 0x0
+#define GPIOINT_LEVEL_HIGH 0x1
+#define GPIOINT_EDGE_FALLING 0x2
+#define GPIOINT_EDGE_RISING 0x3
+#define GPIOINT_EDGE_BOTH 0x4
+
+static int group_to_con_offset(int group)
+{
+ return group << 2;
+}
+
+static int group_to_mask_offset(int group)
+{
+ return group << 2;
+}
+
+static int group_to_pend_offset(int group)
+{
+ return group << 2;
+}
+
+static int s5pc1xx_get_start(unsigned int group)
+{
+ switch (group) {
+ case 0: return S5PC100_GPIO_A0_START;
+ case 1: return S5PC100_GPIO_A1_START;
+ case 2: return S5PC100_GPIO_B_START;
+ case 3: return S5PC100_GPIO_C_START;
+ case 4: return S5PC100_GPIO_D_START;
+ case 5: return S5PC100_GPIO_E0_START;
+ case 6: return S5PC100_GPIO_E1_START;
+ case 7: return S5PC100_GPIO_F0_START;
+ case 8: return S5PC100_GPIO_F1_START;
+ case 9: return S5PC100_GPIO_F2_START;
+ case 10: return S5PC100_GPIO_F3_START;
+ case 11: return S5PC100_GPIO_G0_START;
+ case 12: return S5PC100_GPIO_G1_START;
+ case 13: return S5PC100_GPIO_G2_START;
+ case 14: return S5PC100_GPIO_G3_START;
+ case 15: return S5PC100_GPIO_I_START;
+ case 16: return S5PC100_GPIO_J0_START;
+ case 17: return S5PC100_GPIO_J1_START;
+ case 18: return S5PC100_GPIO_J2_START;
+ case 19: return S5PC100_GPIO_J3_START;
+ case 20: return S5PC100_GPIO_J4_START;
+ default:
+ BUG();
+ }
+
+ return -EINVAL;
+}
+
+static int s5pc1xx_get_group(unsigned int irq)
+{
+ irq -= S3C_IRQ_GPIO(0);
+
+ switch (irq) {
+ case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
+ return 0;
+ case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
+ return 1;
+ case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
+ return 2;
+ case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
+ return 3;
+ case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
+ return 4;
+ case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
+ return 5;
+ case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
+ return 6;
+ case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
+ return 7;
+ case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
+ return 8;
+ case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
+ return 9;
+ case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
+ return 10;
+ case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
+ return 11;
+ case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
+ return 12;
+ case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
+ return 13;
+ case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
+ return 14;
+ case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
+ return 15;
+ case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
+ return 16;
+ case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
+ return 17;
+ case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
+ return 18;
+ case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
+ return 19;
+ case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
+ return 20;
+ default:
+ BUG();
+ }
+
+ return -EINVAL;
+}
+
+static int s5pc1xx_get_offset(unsigned int irq)
+{
+ struct gpio_chip *chip = get_irq_data(irq);
+ return irq - S3C_IRQ_GPIO(chip->base);
+}
+
+static void s5pc1xx_gpioint_ack(unsigned int irq)
+{
+ int group, offset, pend_offset;
+ unsigned int value;
+
+ group = s5pc1xx_get_group(irq);
+ offset = s5pc1xx_get_offset(irq);
+ pend_offset = group_to_pend_offset(group);
+
+ value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+ value |= 1 << offset;
+ __raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+}
+
+static void s5pc1xx_gpioint_mask(unsigned int irq)
+{
+ int group, offset, mask_offset;
+ unsigned int value;
+
+ group = s5pc1xx_get_group(irq);
+ offset = s5pc1xx_get_offset(irq);
+ mask_offset = group_to_mask_offset(group);
+
+ value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ value |= 1 << offset;
+ __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_unmask(unsigned int irq)
+{
+ int group, offset, mask_offset;
+ unsigned int value;
+
+ group = s5pc1xx_get_group(irq);
+ offset = s5pc1xx_get_offset(irq);
+ mask_offset = group_to_mask_offset(group);
+
+ value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ value &= ~(1 << offset);
+ __raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
+{
+ s5pc1xx_gpioint_mask(irq);
+ s5pc1xx_gpioint_ack(irq);
+}
+
+static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+ int group, offset, con_offset;
+ unsigned int value;
+
+ group = s5pc1xx_get_group(irq);
+ offset = s5pc1xx_get_offset(irq);
+ con_offset = group_to_con_offset(group);
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No irq type\n");
+ return -EINVAL;
+ case IRQ_TYPE_EDGE_RISING:
+ type = GPIOINT_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ type = GPIOINT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ type = GPIOINT_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ type = GPIOINT_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ type = GPIOINT_LEVEL_LOW;
+ break;
+ default:
+ BUG();
+ }
+
+
+ value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+ value &= ~(0xf << (offset * 0x4));
+ value |= (type << (offset * 0x4));
+ __raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+
+ return 0;
+}
+
+struct irq_chip s5pc1xx_gpioint = {
+ .name = "GPIO",
+ .ack = s5pc1xx_gpioint_ack,
+ .mask = s5pc1xx_gpioint_mask,
+ .mask_ack = s5pc1xx_gpioint_mask_ack,
+ .unmask = s5pc1xx_gpioint_unmask,
+ .set_type = s5pc1xx_gpioint_set_type,
+};
+
+void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int group, offset, pend_offset, mask_offset;
+ int real_irq, group_end;
+ unsigned int pend, mask;
+
+ group_end = 21;
+
+ for (group = 0; group < group_end; group++) {
+ pend_offset = group_to_pend_offset(group);
+ pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+ if (!pend)
+ continue;
+
+ mask_offset = group_to_mask_offset(group);
+ mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+ pend &= ~mask;
+
+ for (offset = 0; offset < 8; offset++) {
+ if (pend & (1 << offset)) {
+ real_irq = s5pc1xx_get_start(group) + offset;
+ generic_handle_irq(S3C_IRQ_GPIO(real_irq));
+ }
+ }
+ }
+}
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
index 80d6dd9..e44fd04 100644
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -79,7 +79,7 @@
{
u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
- reg &= 0x1f;
+ reg &= 0x1f; /* mask out pending interrupts */
reg |= (1 << 5) << (irq - IRQ_TIMER0);
__raw_writel(reg, S3C64XX_TINT_CSTAT);
}
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
index 6b24035..b436d44 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -49,6 +49,7 @@
#define clk_fin_hpll clk_ext_xtal_mux
#define clk_fout_mpll clk_mpll
+#define clk_vclk_54m clk_54m
struct clk_sources {
unsigned int nr_sources;
@@ -67,723 +68,11 @@
void __iomem *reg_source;
};
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
- clk->rate = rate;
- return 1;
-}
-
-struct clk clk_27m = {
- .name = "clk_27m",
- .id = -1,
- .rate = 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S5PC1XX_CLK_SRC1);
- if (enable)
- val |= S5PC100_CLKSRC1_CLK48M_MASK;
- else
- val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
-
- __raw_writel(val, S5PC1XX_CLK_SRC1);
- local_irq_restore(flags);
-
- return 0;
-}
-
-struct clk clk_48m = {
- .name = "clk_48m",
- .id = -1,
- .rate = 48000000,
- .enable = clk_48m_ctrl,
-};
-
-struct clk clk_54m = {
- .name = "clk_54m",
- .id = -1,
- .rate = 54000000,
-};
-
-struct clk clk_hpll = {
- .name = "hpll",
- .id = -1,
-};
-
-struct clk clk_hd0 = {
- .name = "hclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .set_rate = clk_default_setrate,
-};
-
-struct clk clk_pd0 = {
- .name = "pclkd0",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .set_rate = clk_default_setrate,
-};
-
-static int s5pc1xx_clk_gate(void __iomem *reg,
- struct clk *clk,
- int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
-
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
-
- __raw_writel(con, reg);
- return 0;
-}
-
-static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
-
-int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
-}
-
-int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
-{
- return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
-}
-
-static struct clk init_clocks_disable[] = {
- {
- .name = "dsi",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_DSI,
- }, {
- .name = "csi",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_CSI,
- }, {
- .name = "ccan0",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
- }, {
- .name = "ccan1",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
- }, {
- .name = "keypad",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
- }, {
- .name = "hclkd2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc1xx_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
- }, {
- .name = "iis-d2",
- .id = -1,
- .parent = NULL,
- .enable = s5pc1xx_clk_d20_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
- }, {
- .name = "otg",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
- },
-};
-
-static struct clk init_clocks[] = {
- /* System1 (D0_0) devices */
- {
- .name = "intc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_INTC,
- }, {
- .name = "tzic",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
- }, {
- .name = "cf-ata",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
- }, {
- .name = "mdma",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
- }, {
- .name = "g2d",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_G2D,
- }, {
- .name = "secss",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
- }, {
- .name = "cssys",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d00_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
- },
-
- /* Memory (D0_1) devices */
- {
- .name = "dmc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_DMC,
- }, {
- .name = "sromc",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
- }, {
- .name = "onenand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
- }, {
- .name = "nand",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
- }, {
- .name = "intmem",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
- }, {
- .name = "ebi",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d01_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D01_EBI,
- },
-
- /* System2 (D0_2) devices */
- {
- .name = "seckey",
- .id = -1,
- .parent = &clk_pd0,
- .enable = s5pc1xx_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
- }, {
- .name = "sdm",
- .id = -1,
- .parent = &clk_hd0,
- .enable = s5pc1xx_clk_d02_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D02_SDM,
- },
-
- /* File (D1_0) devices */
- {
- .name = "pdma0",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
- }, {
- .name = "pdma1",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
- }, {
- .name = "modem",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
- }, {
- .name = "hsmmc",
- .id = 0,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
- }, {
- .name = "hsmmc",
- .id = 1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
- }, {
- .name = "hsmmc",
- .id = 2,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d10_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
- },
-
- /* Multimedia1 (D1_1) devices */
- {
- .name = "lcd",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_LCD,
- }, {
- .name = "rotator",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
- }, {
- .name = "fimc",
- .id = 0,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
- }, {
- .name = "fimc",
- .id = 1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
- }, {
- .name = "fimc",
- .id = 2,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
- }, {
- .name = "jpeg",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
- }, {
- .name = "g3d",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d11_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D11_G3D,
- },
-
- /* Multimedia2 (D1_2) devices */
- {
- .name = "tv",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_TV,
- }, {
- .name = "vp",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_VP,
- }, {
- .name = "mixer",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
- }, {
- .name = "hdmi",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
- }, {
- .name = "mfc",
- .id = -1,
- .parent = &clk_h,
- .enable = s5pc1xx_clk_d12_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D12_MFC,
- },
-
- /* System (D1_3) devices */
- {
- .name = "chipid",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
- }, {
- .name = "apc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_APC,
- }, {
- .name = "iec",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_IEC,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_PWM,
- }, {
- .name = "systimer",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_WDT,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d13_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D13_RTC,
- },
-
- /* Connectivity (D1_4) devices */
- {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART2,
- }, {
- .name = "uart",
- .id = 3,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_UART3,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IIC,
- }, {
- .name = "hdmi-i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
- }, {
- .name = "spi",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
- }, {
- .name = "spi",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
- }, {
- .name = "spi",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
- }, {
- .name = "irda",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
- }, {
- .name = "hsitx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
- }, {
- .name = "hsirx",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d14_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
- },
-
- /* Audio (D1_5) devices */
- {
- .name = "iis",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
- }, {
- .name = "iis",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
- }, {
- .name = "iis",
- .id = 2,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
- }, {
- .name = "ac97",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_AC97,
- }, {
- .name = "pcm",
- .id = 0,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
- }, {
- .name = "pcm",
- .id = 1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
- }, {
- .name = "spdif",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
- }, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
- }, {
- .name = "keyif",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
- }, {
- .name = "cg",
- .id = -1,
- .parent = &clk_p,
- .enable = s5pc1xx_clk_d15_ctrl,
- .ctrlbit = S5PC100_CLKGATE_D15_CG,
- },
-
- /* Audio (D2_0) devices: all disabled */
-
- /* Special Clocks 1 */
- {
- .name = "sclk_hpm",
- .id = -1,
- .parent = NULL,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC1XX_CLKGATE_SCLK0_HPM,
- }, {
- .name = "sclk_onenand",
- .id = -1,
- .parent = NULL,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
- }, {
- .name = "sclk_spi_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
- }, {
- .name = "sclk_spi_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
- }, {
- .name = "sclk_spi_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
- }, {
- .name = "sclk_mmc_48",
- .id = 0,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
- }, {
- .name = "sclk_mmc_48",
- .id = 1,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
- }, {
- .name = "sclk_mmc_48",
- .id = 2,
- .parent = &clk_48m,
- .enable = s5pc1xx_sclk0_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
- },
-
- /* Special Clocks 2 */
- {
- .name = "sclk_tv_54",
- .id = -1,
- .parent = &clk_54m,
- .enable = s5pc1xx_sclk1_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_TV54,
- }, {
- .name = "sclk_vdac_54",
- .id = -1,
- .parent = &clk_54m,
- .enable = s5pc1xx_sclk1_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_VDAC54,
- }, {
- .name = "sclk_spdif",
- .id = -1,
- .parent = NULL,
- .enable = s5pc1xx_sclk1_ctrl,
- .ctrlbit = S5PC100_CLKGATE_SCLK1_SPDIF,
- },
-};
-
-void __init s5pc1xx_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
-
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- clkp = init_clocks_disable;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- (clkp->enable)(clkp, 0);
- }
-
- s3c_pwmclk_init();
-}
+/* APLL */
static struct clk clk_fout_apll = {
.name = "fout_apll",
.id = -1,
+ .rate = 27000000,
};
static struct clk *clk_src_apll_list[] = {
@@ -801,12 +90,305 @@
.name = "mout_apll",
.id = -1,
},
- .shift = S5PC1XX_CLKSRC0_APLL_SHIFT,
- .mask = S5PC1XX_CLKSRC0_APLL_MASK,
+ .shift = S5PC100_CLKSRC0_APLL_SHIFT,
+ .mask = S5PC100_CLKSRC0_APLL_MASK,
.sources = &clk_src_apll,
- .reg_source = S5PC1XX_CLK_SRC0,
+ .reg_source = S5PC100_CLKSRC0,
};
+static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
+ ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_apll = {
+ .name = "dout_apll",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ .get_rate = s5pc100_clk_dout_apll_get_rate,
+};
+
+static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
+ ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ u32 div;
+
+ if (parent < rate)
+ return rate;
+
+ div = (parent / rate) - 1;
+ if (div > S5PC100_CLKDIV0_ARM_MASK)
+ div = S5PC100_CLKDIV0_ARM_MASK;
+
+ return parent / (div + 1);
+}
+
+static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ u32 div;
+ u32 val;
+
+ if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
+ return -EINVAL;
+
+ rate = clk_round_rate(clk, rate);
+ div = clk_get_rate(clk->parent) / rate;
+
+ val = __raw_readl(S5PC100_CLKDIV0);
+ val &= S5PC100_CLKDIV0_ARM_MASK;
+ val |= (div - 1);
+ __raw_writel(val, S5PC100_CLKDIV0);
+
+ return 0;
+}
+
+static struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .parent = &clk_dout_apll,
+ .get_rate = s5pc100_clk_arm_get_rate,
+ .set_rate = s5pc100_clk_arm_set_rate,
+ .round_rate = s5pc100_clk_arm_round_rate,
+};
+
+static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
+ ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_d0_bus = {
+ .name = "dout_d0_bus",
+ .id = -1,
+ .parent = &clk_arm,
+ .get_rate = s5pc100_clk_dout_d0_bus_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
+ ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_pclkd0 = {
+ .name = "dout_pclkd0",
+ .id = -1,
+ .parent = &clk_dout_d0_bus,
+ .get_rate = s5pc100_clk_dout_pclkd0_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
+ ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_apll2 = {
+ .name = "dout_apll2",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ .get_rate = s5pc100_clk_dout_apll2_get_rate,
+};
+
+/* MPLL */
+static struct clk *clk_src_mpll_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+ .sources = clk_src_mpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .shift = S5PC100_CLKSRC0_MPLL_SHIFT,
+ .mask = S5PC100_CLKSRC0_MPLL_MASK,
+ .sources = &clk_src_mpll,
+ .reg_source = S5PC100_CLKSRC0,
+};
+
+static struct clk *clkset_am_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_dout_apll2,
+};
+
+static struct clk_sources clk_src_am = {
+ .sources = clkset_am_list,
+ .nr_sources = ARRAY_SIZE(clkset_am_list),
+};
+
+static struct clksrc_clk clk_mout_am = {
+ .clk = {
+ .name = "mout_am",
+ .id = -1,
+ },
+ .shift = S5PC100_CLKSRC0_AMMUX_SHIFT,
+ .mask = S5PC100_CLKSRC0_AMMUX_MASK,
+ .sources = &clk_src_am,
+ .reg_source = S5PC100_CLKSRC0,
+};
+
+static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
+ ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_d1_bus = {
+ .name = "dout_d1_bus",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ .get_rate = s5pc100_clk_dout_d1_bus_get_rate,
+};
+
+static struct clk *clkset_onenand_list[] = {
+ [0] = &clk_dout_d0_bus,
+ [1] = &clk_dout_d1_bus,
+};
+
+static struct clk_sources clk_src_onenand = {
+ .sources = clkset_onenand_list,
+ .nr_sources = ARRAY_SIZE(clkset_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+ .clk = {
+ .name = "mout_onenand",
+ .id = -1,
+ },
+ .shift = S5PC100_CLKSRC0_ONENAND_SHIFT,
+ .mask = S5PC100_CLKSRC0_ONENAND_MASK,
+ .sources = &clk_src_onenand,
+ .reg_source = S5PC100_CLKSRC0,
+};
+
+static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
+ ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_pclkd1 = {
+ .name = "dout_pclkd1",
+ .id = -1,
+ .parent = &clk_dout_d1_bus,
+ .get_rate = s5pc100_clk_dout_pclkd1_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+ ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_mpll2 = {
+ .name = "dout_mpll2",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ .get_rate = s5pc100_clk_dout_mpll2_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
+ ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_cam = {
+ .name = "dout_cam",
+ .id = -1,
+ .parent = &clk_dout_mpll2,
+ .get_rate = s5pc100_clk_dout_cam_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned int ratio;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+ ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
+
+ return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_mpll = {
+ .name = "dout_mpll",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ .get_rate = s5pc100_clk_dout_mpll_get_rate,
+};
+
+/* EPLL */
static struct clk clk_fout_epll = {
.name = "fout_epll",
.id = -1,
@@ -827,91 +409,57 @@
.name = "mout_epll",
.id = -1,
},
- .shift = S5PC1XX_CLKSRC0_EPLL_SHIFT,
- .mask = S5PC1XX_CLKSRC0_EPLL_MASK,
+ .shift = S5PC100_CLKSRC0_EPLL_SHIFT,
+ .mask = S5PC100_CLKSRC0_EPLL_MASK,
.sources = &clk_src_epll,
- .reg_source = S5PC1XX_CLK_SRC0,
+ .reg_source = S5PC100_CLKSRC0,
};
-static struct clk *clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &clk_fout_mpll,
+/* HPLL */
+static struct clk clk_fout_hpll = {
+ .name = "fout_hpll",
+ .id = -1,
};
-static struct clk_sources clk_src_mpll = {
- .sources = clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
+static struct clk *clk_src_hpll_list[] = {
+ [0] = &clk_27m,
+ [1] = &clk_fout_hpll,
};
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
+static struct clk_sources clk_src_hpll = {
+ .sources = clk_src_hpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_hpll_list),
+};
+
+static struct clksrc_clk clk_mout_hpll = {
+ .clk = {
+ .name = "mout_hpll",
.id = -1,
},
- .shift = S5PC1XX_CLKSRC0_MPLL_SHIFT,
- .mask = S5PC1XX_CLKSRC0_MPLL_MASK,
- .sources = &clk_src_mpll,
- .reg_source = S5PC1XX_CLK_SRC0,
+ .shift = S5PC100_CLKSRC0_HPLL_SHIFT,
+ .mask = S5PC100_CLKSRC0_HPLL_MASK,
+ .sources = &clk_src_hpll,
+ .reg_source = S5PC100_CLKSRC0,
};
-static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
- rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
-
- return rate;
-}
-
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
- .id = -1,
- .parent = &clk_mout_mpll.clk,
- .get_rate = s5pc1xx_clk_doutmpll_get_rate,
-};
-
-static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv;
-
- printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
- clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
- rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
-
- return rate;
-}
-
-struct clk clk_dout_mpll2 = {
- .name = "dout_mpll2",
- .id = -1,
- .parent = &clk_mout_mpll.clk,
- .get_rate = s5pc1xx_clk_doutmpll2_get_rate,
-};
-
-static struct clk *clkset_uart_list[] = {
- &clk_mout_epll.clk,
- &clk_dout_mpll,
- NULL,
- NULL
-};
-
-static struct clk_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
-};
+/* Peripherals */
+/*
+ * The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S5PC100 version, and also
+ * have a common parent divisor so are not included here.
+ */
static inline struct clksrc_clk *to_clksrc(struct clk *clk)
{
return container_of(clk, struct clksrc_clk, clk);
}
-static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+static unsigned long s5pc100_getrate_clksrc(struct clk *clk)
{
struct clksrc_clk *sclk = to_clksrc(clk);
unsigned long rate = clk_get_rate(clk->parent);
@@ -925,7 +473,7 @@
return rate;
}
-static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate)
{
struct clksrc_clk *sclk = to_clksrc(clk);
void __iomem *reg = sclk->reg_divider;
@@ -938,14 +486,14 @@
return -EINVAL;
val = __raw_readl(reg);
- val &= ~(0xf << sclk->shift);
- val |= (div - 1) << sclk->shift;
+ val &= ~(0xf << sclk->divider_shift);
+ val |= (div - 1) << sclk->divider_shift;
__raw_writel(val, reg);
return 0;
}
-static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent)
{
struct clksrc_clk *sclk = to_clksrc(clk);
struct clk_sources *srcs = sclk->sources;
@@ -970,7 +518,7 @@
return -EINVAL;
}
-static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
unsigned long rate)
{
unsigned long parent_rate = clk_get_rate(clk->parent);
@@ -992,35 +540,466 @@
return rate;
}
+static struct clk *clkset_spi_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll2,
+ &clk_fin_epll,
+ &clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_spi = {
+ .sources = clkset_spi_list,
+ .nr_sources = ARRAY_SIZE(clkset_spi_list),
+};
+
+static struct clksrc_clk clk_spi0 = {
+ .clk = {
+ .name = "spi_bus",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_SPI0_SHIFT,
+ .mask = S5PC100_CLKSRC1_SPI0_MASK,
+ .sources = &clkset_spi,
+ .divider_shift = S5PC100_CLKDIV2_SPI0_SHIFT,
+ .reg_divider = S5PC100_CLKDIV2,
+ .reg_source = S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi1 = {
+ .clk = {
+ .name = "spi_bus",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_SPI1_SHIFT,
+ .mask = S5PC100_CLKSRC1_SPI1_MASK,
+ .sources = &clkset_spi,
+ .divider_shift = S5PC100_CLKDIV2_SPI1_SHIFT,
+ .reg_divider = S5PC100_CLKDIV2,
+ .reg_source = S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi2 = {
+ .clk = {
+ .name = "spi_bus",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_SPI2_SHIFT,
+ .mask = S5PC100_CLKSRC1_SPI2_MASK,
+ .sources = &clkset_spi,
+ .divider_shift = S5PC100_CLKDIV2_SPI2_SHIFT,
+ .reg_divider = S5PC100_CLKDIV2,
+ .reg_source = S5PC100_CLKSRC1,
+};
+
+static struct clk *clkset_uart_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+};
+
+static struct clk_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
static struct clksrc_clk clk_uart_uclk1 = {
.clk = {
.name = "uclk1",
.id = -1,
.ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
- .enable = s5pc1xx_sclk0_ctrl,
- .set_parent = s5pc1xx_setparent_clksrc,
- .get_rate = s5pc1xx_getrate_clksrc,
- .set_rate = s5pc1xx_setrate_clksrc,
- .round_rate = s5pc1xx_roundrate_clksrc,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
},
.shift = S5PC100_CLKSRC1_UART_SHIFT,
.mask = S5PC100_CLKSRC1_UART_MASK,
.sources = &clkset_uart,
.divider_shift = S5PC100_CLKDIV2_UART_SHIFT,
- .reg_divider = S5PC1XX_CLK_DIV2,
- .reg_source = S5PC1XX_CLK_SRC1,
+ .reg_divider = S5PC100_CLKDIV2,
+ .reg_source = S5PC100_CLKSRC1,
+};
+
+static struct clk clk_iis_cd0 = {
+ .name = "iis_cdclk0",
+ .id = -1,
+};
+
+static struct clk clk_iis_cd1 = {
+ .name = "iis_cdclk1",
+ .id = -1,
+};
+
+static struct clk clk_iis_cd2 = {
+ .name = "iis_cdclk2",
+ .id = -1,
+};
+
+static struct clk clk_pcm_cd0 = {
+ .name = "pcm_cdclk0",
+ .id = -1,
+};
+
+static struct clk clk_pcm_cd1 = {
+ .name = "pcm_cdclk1",
+ .id = -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+ &clk_iis_cd0,
+ &clk_pcm_cd0,
+ &clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio0 = {
+ .sources = clkset_audio0_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clksrc_clk clk_audio0 = {
+ .clk = {
+ .name = "audio-bus",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO0,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC3_AUDIO0_SHIFT,
+ .mask = S5PC100_CLKSRC3_AUDIO0_MASK,
+ .sources = &clkset_audio0,
+ .divider_shift = S5PC100_CLKDIV4_AUDIO0_SHIFT,
+ .reg_divider = S5PC100_CLKDIV4,
+ .reg_source = S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio1_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+ &clk_iis_cd1,
+ &clk_pcm_cd1,
+ &clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio1 = {
+ .sources = clkset_audio1_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clksrc_clk clk_audio1 = {
+ .clk = {
+ .name = "audio-bus",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO1,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC3_AUDIO1_SHIFT,
+ .mask = S5PC100_CLKSRC3_AUDIO1_MASK,
+ .sources = &clkset_audio1,
+ .divider_shift = S5PC100_CLKDIV4_AUDIO1_SHIFT,
+ .reg_divider = S5PC100_CLKDIV4,
+ .reg_source = S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio2_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+ &clk_iis_cd2,
+ &clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio2 = {
+ .sources = clkset_audio2_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio2_list),
+};
+
+static struct clksrc_clk clk_audio2 = {
+ .clk = {
+ .name = "audio-bus",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_AUDIO2,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC3_AUDIO2_SHIFT,
+ .mask = S5PC100_CLKSRC3_AUDIO2_MASK,
+ .sources = &clkset_audio2,
+ .divider_shift = S5PC100_CLKDIV4_AUDIO2_SHIFT,
+ .reg_divider = S5PC100_CLKDIV4,
+ .reg_source = S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_spdif_list[] = {
+ &clk_audio0.clk,
+ &clk_audio1.clk,
+ &clk_audio2.clk,
+};
+
+static struct clk_sources clkset_spdif = {
+ .sources = clkset_spdif_list,
+ .nr_sources = ARRAY_SIZE(clkset_spdif_list),
+};
+
+static struct clksrc_clk clk_spdif = {
+ .clk = {
+ .name = "spdif",
+ .id = -1,
+ },
+ .shift = S5PC100_CLKSRC3_SPDIF_SHIFT,
+ .mask = S5PC100_CLKSRC3_SPDIF_MASK,
+ .sources = &clkset_spdif,
+ .reg_source = S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_lcd_fimc_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_mout_hpll.clk,
+ &clk_vclk_54m,
+};
+
+static struct clk_sources clkset_lcd_fimc = {
+ .sources = clkset_lcd_fimc_list,
+ .nr_sources = ARRAY_SIZE(clkset_lcd_fimc_list),
+};
+
+static struct clksrc_clk clk_lcd = {
+ .clk = {
+ .name = "lcd",
+ .id = -1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_LCD,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_LCD_SHIFT,
+ .mask = S5PC100_CLKSRC2_LCD_MASK,
+ .sources = &clkset_lcd_fimc,
+ .divider_shift = S5PC100_CLKDIV3_LCD_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc0 = {
+ .clk = {
+ .name = "fimc",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC0,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_FIMC0_SHIFT,
+ .mask = S5PC100_CLKSRC2_FIMC0_MASK,
+ .sources = &clkset_lcd_fimc,
+ .divider_shift = S5PC100_CLKDIV3_FIMC0_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc1 = {
+ .clk = {
+ .name = "fimc",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC1,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_FIMC1_SHIFT,
+ .mask = S5PC100_CLKSRC2_FIMC1_MASK,
+ .sources = &clkset_lcd_fimc,
+ .divider_shift = S5PC100_CLKDIV3_FIMC1_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc2 = {
+ .clk = {
+ .name = "fimc",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_FIMC2,
+ .enable = s5pc100_sclk1_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_FIMC2_SHIFT,
+ .mask = S5PC100_CLKSRC2_FIMC2_MASK,
+ .sources = &clkset_lcd_fimc,
+ .divider_shift = S5PC100_CLKDIV3_FIMC2_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clk *clkset_mmc_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_fin_epll,
+ &clk_mout_hpll.clk ,
+};
+
+static struct clk_sources clkset_mmc = {
+ .sources = clkset_mmc_list,
+ .nr_sources = ARRAY_SIZE(clkset_mmc_list),
+};
+
+static struct clksrc_clk clk_mmc0 = {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 0,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_MMC0_SHIFT,
+ .mask = S5PC100_CLKSRC2_MMC0_MASK,
+ .sources = &clkset_mmc,
+ .divider_shift = S5PC100_CLKDIV3_MMC0_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc1 = {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_MMC1_SHIFT,
+ .mask = S5PC100_CLKSRC2_MMC1_MASK,
+ .sources = &clkset_mmc,
+ .divider_shift = S5PC100_CLKDIV3_MMC1_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc2 = {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 2,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC2_MMC2_SHIFT,
+ .mask = S5PC100_CLKSRC2_MMC2_MASK,
+ .sources = &clkset_mmc,
+ .divider_shift = S5PC100_CLKDIV3_MMC2_SHIFT,
+ .reg_divider = S5PC100_CLKDIV3,
+ .reg_source = S5PC100_CLKSRC2,
+};
+
+
+static struct clk *clkset_usbhost_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ &clk_mout_hpll.clk,
+ &clk_48m,
+};
+
+static struct clk_sources clkset_usbhost = {
+ .sources = clkset_usbhost_list,
+ .nr_sources = ARRAY_SIZE(clkset_usbhost_list),
+};
+
+static struct clksrc_clk clk_usbhost = {
+ .clk = {
+ .name = "usbhost",
+ .id = -1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_USBHOST,
+ .enable = s5pc100_sclk0_ctrl,
+ .set_parent = s5pc100_setparent_clksrc,
+ .get_rate = s5pc100_getrate_clksrc,
+ .set_rate = s5pc100_setrate_clksrc,
+ .round_rate = s5pc100_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_UHOST_SHIFT,
+ .mask = S5PC100_CLKSRC1_UHOST_MASK,
+ .sources = &clkset_usbhost,
+ .divider_shift = S5PC100_CLKDIV2_UHOST_SHIFT,
+ .reg_divider = S5PC100_CLKDIV2,
+ .reg_source = S5PC100_CLKSRC1,
};
/* Clock initialisation code */
static struct clksrc_clk *init_parents[] = {
&clk_mout_apll,
- &clk_mout_epll,
&clk_mout_mpll,
+ &clk_mout_am,
+ &clk_mout_onenand,
+ &clk_mout_epll,
+ &clk_mout_hpll,
+ &clk_spi0,
+ &clk_spi1,
+ &clk_spi2,
&clk_uart_uclk1,
+ &clk_audio0,
+ &clk_audio1,
+ &clk_audio2,
+ &clk_spdif,
+ &clk_lcd,
+ &clk_fimc0,
+ &clk_fimc1,
+ &clk_fimc2,
+ &clk_mmc0,
+ &clk_mmc1,
+ &clk_mmc2,
+ &clk_usbhost,
};
-static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk)
{
struct clk_sources *srcs = clk->sources;
u32 clksrc = __raw_readl(clk->reg_source);
@@ -1036,9 +1015,9 @@
clk->clk.parent = srcs->sources[clksrc];
- printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
- clk->clk.name, clk->clk.parent->name, clksrc,
- clk_get_rate(&clk->clk));
+ printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n",
+ clk->clk.name, clk->clk.parent->name, clksrc,
+ print_mhz(clk_get_rate(&clk->clk)));
}
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
@@ -1052,20 +1031,16 @@
unsigned long hclk;
unsigned long pclkd0;
unsigned long pclk;
- unsigned long apll;
- unsigned long mpll;
- unsigned long hpll;
- unsigned long epll;
+ unsigned long apll, mpll, epll, hpll;
unsigned int ptr;
u32 clkdiv0, clkdiv1;
printk(KERN_DEBUG "%s: registering clocks\n", __func__);
- clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
- clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+ clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
+ clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
- printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
- __func__, clkdiv0, clkdiv1);
+ printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
xtal_clk = clk_get(NULL, "xtal");
BUG_ON(IS_ERR(xtal_clk));
@@ -1075,48 +1050,81 @@
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
- apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
- mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
- epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+ apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
+ mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
+ epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
- printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
- apll, mpll, epll, hpll);
+ printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
+ ", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
+ print_mhz(apll), print_mhz(mpll),
+ print_mhz(epll), print_mhz(hpll));
- armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+ armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
- printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
- armclk, hclkd0, pclkd0, hclk, pclk);
+ printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
+ " PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
+ " PCLK=%ld.%03ld MHz\n",
+ print_mhz(armclk), print_mhz(hclkd0),
+ print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
clk_fout_apll.rate = apll;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
- clk_fout_apll.rate = apll;
+ clk_fout_hpll.rate = hpll;
clk_h.rate = hclk;
clk_p.rate = pclk;
+ clk_f.rate = armclk;
for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s5pc1xx_set_clksrc(init_parents[ptr]);
+ s5pc100_set_clksrc(init_parents[ptr]);
}
static struct clk *clks[] __initdata = {
&clk_ext_xtal_mux,
+ &clk_mout_apll.clk,
+ &clk_dout_apll,
+ &clk_dout_d0_bus,
+ &clk_dout_pclkd0,
+ &clk_dout_apll2,
+ &clk_mout_mpll.clk,
+ &clk_mout_am.clk,
+ &clk_dout_d1_bus,
+ &clk_mout_onenand.clk,
+ &clk_dout_pclkd1,
+ &clk_dout_mpll2,
+ &clk_dout_cam,
+ &clk_dout_mpll,
&clk_mout_epll.clk,
&clk_fout_epll,
- &clk_mout_mpll.clk,
- &clk_dout_mpll,
+ &clk_iis_cd0,
+ &clk_iis_cd1,
+ &clk_iis_cd2,
+ &clk_pcm_cd0,
+ &clk_pcm_cd1,
+ &clk_spi0.clk,
+ &clk_spi1.clk,
+ &clk_spi2.clk,
&clk_uart_uclk1.clk,
- &clk_ext,
- &clk_epll,
- &clk_27m,
- &clk_48m,
- &clk_54m,
+ &clk_audio0.clk,
+ &clk_audio1.clk,
+ &clk_audio2.clk,
+ &clk_spdif.clk,
+ &clk_lcd.clk,
+ &clk_fimc0.clk,
+ &clk_fimc1.clk,
+ &clk_fimc2.clk,
+ &clk_mmc0.clk,
+ &clk_mmc1.clk,
+ &clk_mmc2.clk,
+ &clk_usbhost.clk,
+ &clk_arm,
};
void __init s5pc100_register_clocks(void)
@@ -1133,7 +1141,4 @@
clkp->name, ret);
}
}
-
- clk_mpll.parent = &clk_mout_mpll.clk;
- clk_epll.parent = &clk_mout_epll.clk;
}
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
new file mode 100644
index 0000000..1a63768
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * Base S5PC1XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+#define DISR_OFFSET 0x7008
+
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+ unsigned int gpio = 0;
+
+ for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
index 3d00c02..5e4a7c3 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c0.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
+#include <linux/gpio.h>
#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- /* Pin configuration would be needed */
+ s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
index c8f3ca4..a0a8b4a 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c1.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -17,9 +17,14 @@
struct platform_device; /* don't need the contents */
+#include <linux/gpio.h>
#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- /* Pin configuration would be needed */
+ s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
new file mode 100644
index 0000000..185c894
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2009 Samsung Eletronics
+ *
+ * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+ unsigned int num;
+
+ num = width;
+ /* In case of 8 width, we should decrease the 2 */
+ if (width == 8)
+ num = width - 2;
+
+ end = S5PC100_GPG0(2 + num);
+
+ /* Set all the necessary GPG0/GPG1 pins to special-function 0 */
+ for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ if (width == 8) {
+ for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+ }
+
+ s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S5PC100_GPG2(2 + width);
+
+ /* Set all the necessary GPG2 pins to special-function 2 */
+ for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S5PC100_GPG3(2 + width);
+
+ /* Set all the necessary GPG3 pins to special-function 2 */
+ for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
new file mode 100644
index 0000000..486a0d6
--- /dev/null
+++ b/arch/arm/plat-samsung/Kconfig
@@ -0,0 +1,17 @@
+# arch/arm/plat-samsung/Kconfig
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_SAMSUNG
+ bool
+ depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+ default y
+ help
+ Base platform code for all Samsung SoC based systems
+
+if PLAT_SAMSUNG
+
+
+endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
new file mode 100644
index 0000000..4478b9f
--- /dev/null
+++ b/arch/arm/plat-samsung/Makefile
@@ -0,0 +1,11 @@
+# arch/arm/plat-s3c64xx/Makefile
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n := dummy.o
+obj- :=
+
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 35e3bd9..d856354 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -92,6 +92,7 @@
select PERFORMANCE_COUNTERS
select ARCH_REQUIRE_GPIOLIB
select GENERIC_ALLOCATOR
+ select HAVE_FB_ATMEL
#
# CPU types
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index b401dad..eb140ff 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -54,7 +54,7 @@
config AT_HDMAC
tristate "Atmel AHB DMA support"
- depends on ARCH_AT91SAM9RL
+ depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
select DMA_ENGINE
help
Support the Atmel AHB DMA controller. This can be integrated in
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 5d91362..1f7c10f 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -44,7 +44,7 @@
static struct led_classdev locomo_led0 = {
.name = "locomo:amber:charge",
- .default_trigger = "sharpsl-charge",
+ .default_trigger = "main-battery-charging",
.brightness_set = locomoled_brightness_set0,
};
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 57271cb..84815f9 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -17,11 +17,11 @@
#include <linux/device.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/mfd/mcp.h>
#include <mach/dma.h>
#include <asm/system.h>
-#include "mcp.h"
#define to_mcp(d) container_of(d, struct mcp, attached_device)
#define to_mcp_driver(d) container_of(d, struct mcp_driver, drv)
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 62b32da..2584272 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -19,6 +19,7 @@
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
+#include <linux/mfd/mcp.h>
#include <mach/dma.h>
#include <mach/hardware.h>
@@ -28,7 +29,6 @@
#include <mach/assabet.h>
-#include "mcp.h"
struct mcp_sa11x0 {
u32 mccr0;
@@ -163,6 +163,7 @@
mcp->dma_audio_wr = DMA_Ser4MCP0Wr;
mcp->dma_telco_rd = DMA_Ser4MCP1Rd;
mcp->dma_telco_wr = DMA_Ser4MCP1Wr;
+ mcp->gpio_base = data->gpio_base;
platform_set_drvdata(pdev, mcp);
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index 86fed48..cea9da6 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -14,10 +14,10 @@
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/device.h>
+#include <linux/mfd/ucb1x00.h>
#include <mach/dma.h>
-#include "ucb1x00.h"
#define UCB1X00_ATTR(name,input)\
static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 60c3988..252b741 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -25,12 +25,12 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/mutex.h>
+#include <linux/mfd/ucb1x00.h>
+#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/hardware.h>
-#include "ucb1x00.h"
-
static DEFINE_MUTEX(ucb1x00_mutex);
static LIST_HEAD(ucb1x00_drivers);
static LIST_HEAD(ucb1x00_devices);
@@ -108,6 +108,60 @@
return ucb1x00_reg_read(ucb, UCB_IO_DATA);
}
+static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ if (value)
+ ucb->io_out |= 1 << offset;
+ else
+ ucb->io_out &= ~(1 << offset);
+
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+}
+
+static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset);
+}
+
+static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_dir &= ~(1 << offset);
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+ return 0;
+}
+
+static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
+ , int value)
+{
+ struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_dir |= (1 << offset);
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+
+ if (value)
+ ucb->io_out |= 1 << offset;
+ else
+ ucb->io_out &= ~(1 << offset);
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+ return 0;
+}
+
/*
* UCB1300 data sheet says we must:
* 1. enable ADC => 5us (including reference startup time)
@@ -476,6 +530,7 @@
struct ucb1x00_driver *drv;
unsigned int id;
int ret = -ENODEV;
+ int temp;
mcp_enable(mcp);
id = mcp_reg_read(mcp, UCB_ID);
@@ -508,12 +563,27 @@
goto err_free;
}
+ ucb->gpio.base = -1;
+ if (mcp->gpio_base != 0) {
+ ucb->gpio.label = dev_name(&ucb->dev);
+ ucb->gpio.base = mcp->gpio_base;
+ ucb->gpio.ngpio = 10;
+ ucb->gpio.set = ucb1x00_gpio_set;
+ ucb->gpio.get = ucb1x00_gpio_get;
+ ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
+ ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+ ret = gpiochip_add(&ucb->gpio);
+ if (ret)
+ goto err_free;
+ } else
+ dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
+
ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
"UCB1x00", ucb);
if (ret) {
printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
ucb->irq, ret);
- goto err_free;
+ goto err_gpio;
}
mcp_set_drvdata(mcp, ucb);
@@ -522,6 +592,7 @@
if (ret)
goto err_irq;
+
INIT_LIST_HEAD(&ucb->devs);
mutex_lock(&ucb1x00_mutex);
list_add(&ucb->node, &ucb1x00_devices);
@@ -529,10 +600,14 @@
ucb1x00_add_dev(ucb, drv);
}
mutex_unlock(&ucb1x00_mutex);
+
goto out;
err_irq:
free_irq(ucb->irq, ucb);
+ err_gpio:
+ if (ucb->gpio.base != -1)
+ temp = gpiochip_remove(&ucb->gpio);
err_free:
kfree(ucb);
err_disable:
@@ -545,6 +620,7 @@
{
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct list_head *l, *n;
+ int ret;
mutex_lock(&ucb1x00_mutex);
list_del(&ucb->node);
@@ -554,6 +630,12 @@
}
mutex_unlock(&ucb1x00_mutex);
+ if (ucb->gpio.base != -1) {
+ ret = gpiochip_remove(&ucb->gpio);
+ if (ret)
+ dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
+ }
+
free_irq(ucb->irq, ucb);
device_unregister(&ucb->dev);
}
@@ -604,6 +686,7 @@
struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
struct ucb1x00_dev *dev;
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
mutex_lock(&ucb1x00_mutex);
list_for_each_entry(dev, &ucb->devs, dev_node) {
if (dev->drv->resume)
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 61b7d3e..000cb41 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -30,12 +30,12 @@
#include <linux/freezer.h>
#include <linux/slab.h>
#include <linux/kthread.h>
+#include <linux/mfd/ucb1x00.h>
#include <mach/dma.h>
#include <mach/collie.h>
#include <asm/mach-types.h>
-#include "ucb1x00.h"
struct ucb1x00_ts {
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 705a589..90d168a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -56,7 +56,7 @@
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
- if (host->hw_designer == 0x80)
+ if (host->hw_designer == AMBA_VENDOR_ST)
clk |= MCI_FCEN; /* Bug fix in ST IP block */
clk |= MCI_CLK_ENABLE;
/* This hasn't proven to be worthwhile */
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 9fb480b..bb47ff4 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -43,6 +43,9 @@
#define NR_SG 1
#define CLKRT_OFF (~0)
+#define mmc_has_26MHz() (cpu_is_pxa300() || cpu_is_pxa310() \
+ || cpu_is_pxa935())
+
struct pxamci_host {
struct mmc_host *mmc;
spinlock_t lock;
@@ -457,7 +460,7 @@
clk_enable(host->clk);
if (ios->clock == 26000000) {
- /* to support 26MHz on pxa300/pxa310 */
+ /* to support 26MHz */
host->clkrt = 7;
} else {
/* to handle (19.5MHz, 26MHz) */
@@ -608,8 +611,7 @@
* Calculate minimum clock rate, rounding up.
*/
mmc->f_min = (host->clkrate + 63) / 64;
- mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
- : host->clkrate;
+ mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
pxamci_init_ocr(host);
@@ -618,7 +620,7 @@
if (!cpu_is_pxa25x()) {
mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
host->cmdat |= CMDAT_SDIO_INT_EN;
- if (cpu_is_pxa300() || cpu_is_pxa310())
+ if (mmc_has_26MHz())
mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
MMC_CAP_SD_HIGHSPEED;
}
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 2fda0b6..8f8e87b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -358,7 +358,7 @@
config MTD_NAND_PXA3xx
tristate "Support for NAND flash devices on PXA3xx"
- depends on MTD_NAND && PXA3xx
+ depends on MTD_NAND && (PXA3xx || ARCH_MMP)
help
This enables the driver for the NAND flash device found on
PXA3xx processors
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 6ea520a..1a5a036 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -9,6 +9,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
@@ -22,7 +23,7 @@
#include <linux/irq.h>
#include <mach/dma.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
#define CHIP_DELAY_TIMEOUT (2 * HZ/10)
@@ -84,10 +85,6 @@
#define NDCB0_CMD1_MASK (0xff)
#define NDCB0_ADDR_CYC_SHIFT (16)
-/* dma-able I/O address for the NAND data and commands */
-#define NDCB0_DMA_ADDR (0x43100048)
-#define NDDB_DMA_ADDR (0x43100040)
-
/* macros for registers read/write */
#define nand_writel(info, off, val) \
__raw_writel((val), (info)->mmio_base + (off))
@@ -123,6 +120,7 @@
struct clk *clk;
void __iomem *mmio_base;
+ unsigned long mmio_phys;
unsigned int buf_start;
unsigned int buf_count;
@@ -228,13 +226,35 @@
.chip_id = 0x46ec,
};
+static struct pxa3xx_nand_flash samsung2GbX8 = {
+ .timing = &samsung512MbX16_timing,
+ .cmdset = &smallpage_cmdset,
+ .page_per_block = 64,
+ .page_size = 2048,
+ .flash_width = 8,
+ .dfc_width = 8,
+ .num_blocks = 2048,
+ .chip_id = 0xdaec,
+};
+
+static struct pxa3xx_nand_flash samsung32GbX8 = {
+ .timing = &samsung512MbX16_timing,
+ .cmdset = &smallpage_cmdset,
+ .page_per_block = 128,
+ .page_size = 4096,
+ .flash_width = 8,
+ .dfc_width = 8,
+ .num_blocks = 8192,
+ .chip_id = 0xd7ec,
+};
+
static struct pxa3xx_nand_timing micron_timing = {
.tCH = 10,
.tCS = 25,
.tWH = 15,
.tWP = 25,
.tRH = 15,
- .tRP = 25,
+ .tRP = 30,
.tR = 25000,
.tWHR = 60,
.tAR = 10,
@@ -262,6 +282,28 @@
.chip_id = 0xb12c,
};
+static struct pxa3xx_nand_flash micron4GbX8 = {
+ .timing = µn_timing,
+ .cmdset = &largepage_cmdset,
+ .page_per_block = 64,
+ .page_size = 2048,
+ .flash_width = 8,
+ .dfc_width = 8,
+ .num_blocks = 4096,
+ .chip_id = 0xdc2c,
+};
+
+static struct pxa3xx_nand_flash micron4GbX16 = {
+ .timing = µn_timing,
+ .cmdset = &largepage_cmdset,
+ .page_per_block = 64,
+ .page_size = 2048,
+ .flash_width = 16,
+ .dfc_width = 16,
+ .num_blocks = 4096,
+ .chip_id = 0xcc2c,
+};
+
static struct pxa3xx_nand_timing stm2GbX16_timing = {
.tCH = 10,
.tCS = 35,
@@ -287,8 +329,12 @@
static struct pxa3xx_nand_flash *builtin_flash_types[] = {
&samsung512MbX16,
+ &samsung2GbX8,
+ &samsung32GbX8,
µn1GbX8,
µn1GbX16,
+ µn4GbX8,
+ µn4GbX16,
&stm2GbX16,
};
#endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */
@@ -489,7 +535,7 @@
switch (info->state) {
case STATE_PIO_WRITING:
__raw_writesl(info->mmio_base + NDDB, info->data_buff,
- info->data_size << 2);
+ DIV_ROUND_UP(info->data_size, 4));
enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
@@ -501,7 +547,7 @@
break;
case STATE_PIO_READING:
__raw_readsl(info->mmio_base + NDDB, info->data_buff,
- info->data_size << 2);
+ DIV_ROUND_UP(info->data_size, 4));
break;
default:
printk(KERN_ERR "%s: invalid state %d\n", __func__,
@@ -523,11 +569,11 @@
if (dir_out) {
desc->dsadr = info->data_buff_phys;
- desc->dtadr = NDDB_DMA_ADDR;
+ desc->dtadr = info->mmio_phys + NDDB;
desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
} else {
desc->dtadr = info->data_buff_phys;
- desc->dsadr = NDDB_DMA_ADDR;
+ desc->dsadr = info->mmio_phys + NDDB;
desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
}
@@ -669,6 +715,7 @@
/* disable HW ECC to get all the OOB data */
info->buf_count = mtd->writesize + mtd->oobsize;
info->buf_start = mtd->writesize + column;
+ memset(info->data_buff, 0xFF, info->buf_count);
if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
break;
@@ -1239,13 +1286,17 @@
ret = -ENODEV;
goto fail_free_res;
}
+ info->mmio_phys = r->start;
ret = pxa3xx_nand_init_buff(info);
if (ret)
goto fail_free_io;
- ret = request_irq(IRQ_NAND, pxa3xx_nand_irq, IRQF_DISABLED,
- pdev->name, info);
+ /* initialize all interrupts to be disabled */
+ disable_int(info, NDSR_MASK);
+
+ ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED,
+ pdev->name, info);
if (ret < 0) {
dev_err(&pdev->dev, "failed to request IRQ\n");
goto fail_free_buf;
@@ -1271,7 +1322,7 @@
return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
fail_free_irq:
- free_irq(IRQ_NAND, info);
+ free_irq(irq, info);
fail_free_buf:
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
@@ -1296,12 +1347,15 @@
struct mtd_info *mtd = platform_get_drvdata(pdev);
struct pxa3xx_nand_info *info = mtd->priv;
struct resource *r;
+ int irq;
platform_set_drvdata(pdev, NULL);
del_mtd_device(mtd);
del_mtd_partitions(mtd);
- free_irq(IRQ_NAND, info);
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0)
+ free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
dma_free_writecombine(&pdev->dev, info->data_buff_size,
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index f3ccbcc..cd5082d 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -179,7 +179,7 @@
depends on BCM63XX && PCMCIA
config PCMCIA_SOC_COMMON
- bool
+ tristate
config PCMCIA_SA1100
tristate "SA1100 support"
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index 11cc3ba..8db86b9 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -51,7 +51,7 @@
#ifdef CONFIG_SA1100_CERF
pcmcia_cerf_init,
#endif
-#ifdef CONFIG_SA1100_H3600
+#if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600)
pcmcia_h3600_init,
#endif
#ifdef CONFIG_SA1100_SHANNON
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index 3a121ac69..56329ad 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -10,47 +10,139 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/h3600.h>
+#include <mach/h3xxx.h>
#include "sa1100_generic.h"
static struct pcmcia_irqs irqs[] = {
- { 0, IRQ_GPIO_H3600_PCMCIA_CD0, "PCMCIA CD0" },
- { 1, IRQ_GPIO_H3600_PCMCIA_CD1, "PCMCIA CD1" }
+ { .sock = 0, .str = "PCMCIA CD0" }, /* .irq will be filled later */
+ { .sock = 1, .str = "PCMCIA CD1" }
};
static int h3600_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->socket.pci_irq = skt->nr ? IRQ_GPIO_H3600_PCMCIA_IRQ1
- : IRQ_GPIO_H3600_PCMCIA_IRQ0;
+ int err;
+ switch (skt->nr) {
+ case 0:
+ err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ0, "PCMCIA IRQ0");
+ if (err)
+ goto err00;
+ err = gpio_direction_input(H3XXX_GPIO_PCMCIA_IRQ0);
+ if (err)
+ goto err01;
+ skt->socket.pci_irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_IRQ0);
- return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ err = gpio_request(H3XXX_GPIO_PCMCIA_CD0, "PCMCIA CD0");
+ if (err)
+ goto err01;
+ err = gpio_direction_input(H3XXX_GPIO_PCMCIA_CD0);
+ if (err)
+ goto err02;
+ irqs[0].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD0);
+
+ err = gpio_request(H3XXX_EGPIO_OPT_NVRAM_ON, "OPT NVRAM ON");
+ if (err)
+ goto err02;
+ err = gpio_direction_output(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
+ if (err)
+ goto err03;
+ err = gpio_request(H3XXX_EGPIO_OPT_ON, "OPT ON");
+ if (err)
+ goto err03;
+ err = gpio_direction_output(H3XXX_EGPIO_OPT_ON, 0);
+ if (err)
+ goto err04;
+ err = gpio_request(H3XXX_EGPIO_OPT_RESET, "OPT RESET");
+ if (err)
+ goto err04;
+ err = gpio_direction_output(H3XXX_EGPIO_OPT_RESET, 0);
+ if (err)
+ goto err05;
+ err = gpio_request(H3XXX_EGPIO_CARD_RESET, "PCMCIA CARD RESET");
+ if (err)
+ goto err05;
+ err = gpio_direction_output(H3XXX_EGPIO_CARD_RESET, 0);
+ if (err)
+ goto err06;
+ err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (err)
+ goto err06;
+ break;
+ case 1:
+ err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ1, "PCMCIA IRQ1");
+ if (err)
+ goto err10;
+ err = gpio_direction_input(H3XXX_GPIO_PCMCIA_IRQ1);
+ if (err)
+ goto err11;
+ skt->socket.pci_irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_IRQ1);
+
+ err = gpio_request(H3XXX_GPIO_PCMCIA_CD1, "PCMCIA CD1");
+ if (err)
+ goto err11;
+ err = gpio_direction_input(H3XXX_GPIO_PCMCIA_CD1);
+ if (err)
+ goto err12;
+ irqs[1].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD1);
+
+ err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+ if (err)
+ goto err12;
+ break;
+ }
+ return 0;
+
+err06: gpio_free(H3XXX_EGPIO_CARD_RESET);
+err05: gpio_free(H3XXX_EGPIO_OPT_RESET);
+err04: gpio_free(H3XXX_EGPIO_OPT_ON);
+err03: gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
+err02: gpio_free(H3XXX_GPIO_PCMCIA_CD0);
+err01: gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
+err00: return err;
+
+err12: gpio_free(H3XXX_GPIO_PCMCIA_CD0);
+err11: gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
+err10: return err;
}
static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
- /* Disable CF bus: */
- assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
+ switch (skt->nr) {
+ case 0:
+ /* Disable CF bus: */
+ gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
+
+ gpio_free(H3XXX_EGPIO_CARD_RESET);
+ gpio_free(H3XXX_EGPIO_OPT_RESET);
+ gpio_free(H3XXX_EGPIO_OPT_ON);
+ gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
+ gpio_free(H3XXX_GPIO_PCMCIA_CD0);
+ gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
+ break;
+ case 1:
+ gpio_free(H3XXX_GPIO_PCMCIA_CD1);
+ gpio_free(H3XXX_GPIO_PCMCIA_IRQ1);
+ break;
+ }
}
static void
h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
- unsigned long levels = GPLR;
-
switch (skt->nr) {
case 0:
- state->detect = levels & GPIO_H3600_PCMCIA_CD0 ? 0 : 1;
- state->ready = levels & GPIO_H3600_PCMCIA_IRQ0 ? 1 : 0;
+ state->detect = !gpio_get_value(H3XXX_GPIO_PCMCIA_CD0);
+ state->ready = !!gpio_get_value(H3XXX_GPIO_PCMCIA_IRQ0);
state->bvd1 = 0;
state->bvd2 = 0;
state->wrprot = 0; /* Not available on H3600. */
@@ -59,8 +151,8 @@
break;
case 1:
- state->detect = levels & GPIO_H3600_PCMCIA_CD1 ? 0 : 1;
- state->ready = levels & GPIO_H3600_PCMCIA_IRQ1 ? 1 : 0;
+ state->detect = !gpio_get_value(H3XXX_GPIO_PCMCIA_CD1);
+ state->ready = !!gpio_get_value(H3XXX_GPIO_PCMCIA_IRQ1);
state->bvd1 = 0;
state->bvd2 = 0;
state->wrprot = 0; /* Not available on H3600. */
@@ -79,7 +171,7 @@
return -1;
}
- assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
+ gpio_set_value(H3XXX_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
/* Silently ignore Vpp, output enable, speaker enable. */
@@ -89,9 +181,9 @@
static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
/* Enable CF bus: */
- assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 1);
+ gpio_set_value(H3XXX_EGPIO_OPT_ON, 1);
+ gpio_set_value(H3XXX_EGPIO_OPT_RESET, 0);
msleep(10);
@@ -109,10 +201,10 @@
* socket 0 then socket 1.
*/
if (skt->nr == 1) {
- assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
- assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
+ gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
/* hmm, does this suck power? */
- assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
+ gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
}
}
@@ -131,7 +223,7 @@
{
int ret = -ENODEV;
- if (machine_is_h3600())
+ if (machine_is_h3600() || machine_is_h3100())
ret = sa11xx_drv_pcmcia_probe(dev, &h3600_pcmcia_ops, 0, 2);
return ret;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index cea6cef2..1186749 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -77,6 +77,13 @@
Say Y to enable support for the battery on the Sharp Zaurus
SL-6000 (tosa) models.
+config BATTERY_COLLIE
+ tristate "Sharp SL-5500 (collie) battery"
+ depends on SA1100_COLLIE && MCP_UCB1200
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-5500 (collie) models.
+
config BATTERY_WM97XX
bool "WM97xx generic battery driver"
depends on TOUCHSCREEN_WM97XX=y
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b96f29d..356cdfd 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -24,6 +24,7 @@
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
+obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c
new file mode 100644
index 0000000..039f41a
--- /dev/null
+++ b/drivers/power/collie_battery.c
@@ -0,0 +1,418 @@
+/*
+ * Battery and Power Management code for the Sharp SL-5x00
+ *
+ * Copyright (C) 2009 Thomas Kunze
+ *
+ * based on tosa_battery.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/mfd/ucb1x00.h>
+
+#include <asm/mach/sharpsl_param.h>
+#include <asm/mach-types.h>
+#include <mach/collie.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+static struct ucb1x00 *ucb;
+
+struct collie_bat {
+ int status;
+ struct power_supply psy;
+ int full_chrg;
+
+ struct mutex work_lock; /* protects data */
+
+ bool (*is_present)(struct collie_bat *bat);
+ int gpio_full;
+ int gpio_charge_on;
+
+ int technology;
+
+ int gpio_bat;
+ int adc_bat;
+ int adc_bat_divider;
+ int bat_max;
+ int bat_min;
+
+ int gpio_temp;
+ int adc_temp;
+ int adc_temp_divider;
+};
+
+static struct collie_bat collie_bat_main;
+
+static unsigned long collie_read_bat(struct collie_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+ return 0;
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_bat, 1);
+ msleep(5);
+ ucb1x00_adc_enable(ucb);
+ value = ucb1x00_adc_read(ucb, bat->adc_bat, UCB_SYNC);
+ ucb1x00_adc_disable(ucb);
+ gpio_set_value(bat->gpio_bat, 0);
+ mutex_unlock(&bat_lock);
+ value = value * 1000000 / bat->adc_bat_divider;
+
+ return value;
+}
+
+static unsigned long collie_read_temp(struct collie_bat *bat)
+{
+ unsigned long value = 0;
+ if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_temp, 1);
+ msleep(5);
+ ucb1x00_adc_enable(ucb);
+ value = ucb1x00_adc_read(ucb, bat->adc_temp, UCB_SYNC);
+ ucb1x00_adc_disable(ucb);
+ gpio_set_value(bat->gpio_temp, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 10000 / bat->adc_temp_divider;
+
+ return value;
+}
+
+static int collie_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct collie_bat *bat = container_of(psy, struct collie_bat, psy);
+
+ if (bat->is_present && !bat->is_present(bat)
+ && psp != POWER_SUPPLY_PROP_PRESENT) {
+ return -ENODEV;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = bat->status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = bat->technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = collie_read_bat(bat);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (bat->full_chrg == -1)
+ val->intval = bat->bat_max;
+ else
+ val->intval = bat->full_chrg;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = bat->bat_max;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = bat->bat_min;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = collie_read_temp(bat);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = bat->is_present ? bat->is_present(bat) : 1;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static void collie_bat_external_power_changed(struct power_supply *psy)
+{
+ schedule_work(&bat_work);
+}
+
+static irqreturn_t collie_bat_gpio_isr(int irq, void *data)
+{
+ pr_info("collie_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+ schedule_work(&bat_work);
+ return IRQ_HANDLED;
+}
+
+static void collie_bat_update(struct collie_bat *bat)
+{
+ int old;
+ struct power_supply *psy = &bat->psy;
+
+ mutex_lock(&bat->work_lock);
+
+ old = bat->status;
+
+ if (bat->is_present && !bat->is_present(bat)) {
+ printk(KERN_NOTICE "%s not present\n", psy->name);
+ bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ bat->full_chrg = -1;
+ } else if (power_supply_am_i_supplied(psy)) {
+ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+ gpio_set_value(bat->gpio_charge_on, 1);
+ mdelay(15);
+ }
+
+ if (gpio_get_value(bat->gpio_full)) {
+ if (old == POWER_SUPPLY_STATUS_CHARGING ||
+ bat->full_chrg == -1)
+ bat->full_chrg = collie_read_bat(bat);
+
+ gpio_set_value(bat->gpio_charge_on, 0);
+ bat->status = POWER_SUPPLY_STATUS_FULL;
+ } else {
+ gpio_set_value(bat->gpio_charge_on, 1);
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ } else {
+ gpio_set_value(bat->gpio_charge_on, 0);
+ bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (old != bat->status)
+ power_supply_changed(psy);
+
+ mutex_unlock(&bat->work_lock);
+}
+
+static void collie_bat_work(struct work_struct *work)
+{
+ collie_bat_update(&collie_bat_main);
+}
+
+
+static enum power_supply_property collie_bat_main_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static enum power_supply_property collie_bat_bu_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static struct collie_bat collie_bat_main = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = {
+ .name = "main-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = collie_bat_main_props,
+ .num_properties = ARRAY_SIZE(collie_bat_main_props),
+ .get_property = collie_bat_get_property,
+ .external_power_changed = collie_bat_external_power_changed,
+ .use_for_apm = 1,
+ },
+
+ .gpio_full = COLLIE_GPIO_CO,
+ .gpio_charge_on = COLLIE_GPIO_CHARGE_ON,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = COLLIE_GPIO_MBAT_ON,
+ .adc_bat = UCB_ADC_INP_AD1,
+ .adc_bat_divider = 155,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = COLLIE_GPIO_TMP_ON,
+ .adc_temp = UCB_ADC_INP_AD0,
+ .adc_temp_divider = 10000,
+};
+
+static struct collie_bat collie_bat_bu = {
+ .status = POWER_SUPPLY_STATUS_UNKNOWN,
+ .full_chrg = -1,
+
+ .psy = {
+ .name = "backup-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = collie_bat_bu_props,
+ .num_properties = ARRAY_SIZE(collie_bat_bu_props),
+ .get_property = collie_bat_get_property,
+ .external_power_changed = collie_bat_external_power_changed,
+ },
+
+ .gpio_full = -1,
+ .gpio_charge_on = -1,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+ .gpio_bat = COLLIE_GPIO_BBAT_ON,
+ .adc_bat = UCB_ADC_INP_AD1,
+ .adc_bat_divider = 155,
+ .bat_max = 3000000,
+ .bat_min = 1900000,
+
+ .gpio_temp = -1,
+ .adc_temp = -1,
+ .adc_temp_divider = -1,
+};
+
+static struct {
+ int gpio;
+ char *name;
+ bool output;
+ int value;
+} gpios[] = {
+ { COLLIE_GPIO_CO, "main battery full", 0, 0 },
+ { COLLIE_GPIO_MAIN_BAT_LOW, "main battery low", 0, 0 },
+ { COLLIE_GPIO_CHARGE_ON, "main charge on", 1, 0 },
+ { COLLIE_GPIO_MBAT_ON, "main battery", 1, 0 },
+ { COLLIE_GPIO_TMP_ON, "main battery temp", 1, 0 },
+ { COLLIE_GPIO_BBAT_ON, "backup battery", 1, 0 },
+};
+
+#ifdef CONFIG_PM
+static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state)
+{
+ /* flush all pending status updates */
+ flush_scheduled_work();
+ return 0;
+}
+
+static int collie_bat_resume(struct ucb1x00_dev *dev)
+{
+ /* things may have changed while we were away */
+ schedule_work(&bat_work);
+ return 0;
+}
+#else
+#define collie_bat_suspend NULL
+#define collie_bat_resume NULL
+#endif
+
+static int __devinit collie_bat_probe(struct ucb1x00_dev *dev)
+{
+ int ret;
+ int i;
+
+ if (!machine_is_collie())
+ return -ENODEV;
+
+ ucb = dev->ucb;
+
+ for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+ ret = gpio_request(gpios[i].gpio, gpios[i].name);
+ if (ret) {
+ i--;
+ goto err_gpio;
+ }
+
+ if (gpios[i].output)
+ ret = gpio_direction_output(gpios[i].gpio,
+ gpios[i].value);
+ else
+ ret = gpio_direction_input(gpios[i].gpio);
+
+ if (ret)
+ goto err_gpio;
+ }
+
+ mutex_init(&collie_bat_main.work_lock);
+
+ INIT_WORK(&bat_work, collie_bat_work);
+
+ ret = power_supply_register(&dev->ucb->dev, &collie_bat_main.psy);
+ if (ret)
+ goto err_psy_reg_main;
+ ret = power_supply_register(&dev->ucb->dev, &collie_bat_bu.psy);
+ if (ret)
+ goto err_psy_reg_bu;
+
+ ret = request_irq(gpio_to_irq(COLLIE_GPIO_CO),
+ collie_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "main full", &collie_bat_main);
+ if (!ret) {
+ schedule_work(&bat_work);
+ return 0;
+ }
+ power_supply_unregister(&collie_bat_bu.psy);
+err_psy_reg_bu:
+ power_supply_unregister(&collie_bat_main.psy);
+err_psy_reg_main:
+
+ /* see comment in collie_bat_remove */
+ flush_scheduled_work();
+
+ i--;
+err_gpio:
+ for (; i >= 0; i--)
+ gpio_free(gpios[i].gpio);
+
+ return ret;
+}
+
+static void __devexit collie_bat_remove(struct ucb1x00_dev *dev)
+{
+ int i;
+
+ free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main);
+
+ power_supply_unregister(&collie_bat_bu.psy);
+ power_supply_unregister(&collie_bat_main.psy);
+
+ /*
+ * now flush all pending work.
+ * we won't get any more schedules, since all
+ * sources (isr and external_power_changed)
+ * are unregistered now.
+ */
+ flush_scheduled_work();
+
+ for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
+ gpio_free(gpios[i].gpio);
+}
+
+static struct ucb1x00_driver collie_bat_driver = {
+ .add = collie_bat_probe,
+ .remove = __devexit_p(collie_bat_remove),
+ .suspend = collie_bat_suspend,
+ .resume = collie_bat_resume,
+};
+
+static int __init collie_bat_init(void)
+{
+ return ucb1x00_register_driver(&collie_bat_driver);
+}
+
+static void __exit collie_bat_exit(void)
+{
+ ucb1x00_unregister_driver(&collie_bat_driver);
+}
+
+module_init(collie_bat_init);
+module_exit(collie_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Kunze");
+MODULE_DESCRIPTION("Collie battery driver");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3c20dae..e11e1cd 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -780,7 +780,7 @@
config RTC_DRV_MV
tristate "Marvell SoC RTC"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || ARCH_DOVE
help
If you say yes here you will get support for the in-chip RTC
that can be found in some of Marvell's SoC devices, such as
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index c99f082..73f089d 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -2,7 +2,7 @@
*
* Driver for Samsung S3C2410 SoC onboard UARTs.
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index 6e057d8..ce75e28 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -2,7 +2,7 @@
*
* Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 69ff5d3..094cc39 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -2,7 +2,7 @@
*
* Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index 26c49e1..fad6083 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -6,7 +6,7 @@
*
* Author: Sandeep Patil <sandeep.patil@azingo.com>
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1523e8d..52e3df1 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -2,7 +2,7 @@
*
* Driver core for Samsung SoC onboard UARTs.
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index d3fe315..1fb2234 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -2,7 +2,7 @@
*
* Driver for Samsung SoC onboard UARTs.
*
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 188e1ba..6b89eb5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -5,6 +5,9 @@
menu "Graphics support"
depends on HAS_IOMEM
+config HAVE_FB_ATMEL
+ bool
+
source "drivers/char/agp/Kconfig"
source "drivers/gpu/vga/Kconfig"
@@ -937,7 +940,7 @@
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
+ depends on FB && HAVE_FB_ATMEL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c
index 701a108..7fcb0eb 100644
--- a/drivers/video/backlight/da903x_bl.c
+++ b/drivers/video/backlight/da903x_bl.c
@@ -25,6 +25,7 @@
#define DA9034_WLED_CONTROL1 0x3C
#define DA9034_WLED_CONTROL2 0x3D
+#define DA9034_WLED_ISET(x) ((x) & 0x1f)
#define DA9034_WLED_BOOST_EN (1 << 5)
@@ -101,6 +102,7 @@
static int da903x_backlight_probe(struct platform_device *pdev)
{
+ struct da9034_backlight_pdata *pdata = pdev->dev.platform_data;
struct da903x_backlight_data *data;
struct backlight_device *bl;
int max_brightness;
@@ -127,6 +129,11 @@
data->da903x_dev = pdev->dev.parent;
data->current_brightness = 0;
+ /* adjust the WLED output current */
+ if (pdata)
+ da903x_write(data->da903x_dev, DA9034_WLED_CONTROL2,
+ DA9034_WLED_ISET(pdata->output_current));
+
bl = backlight_device_register(pdev->name, data->da903x_dev,
data, &da903x_backlight_ops);
if (IS_ERR(bl)) {
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index bbfb502..4a3d46e 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -367,6 +367,7 @@
spi_message_init(m);
+ x->cs_change = 1;
x->tx_buf = &lcd->buf[0];
spi_message_add_tail(x, m);
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
index 84d8327..75285d3 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/pxa168fb.c
@@ -687,6 +687,7 @@
}
info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
+ set_graphics_start(info, 0, 0);
/*
* Set video mode according to platform data.
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 1820c4a..f58a3aa 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -80,7 +80,8 @@
static int pxafb_activate_var(struct fb_var_screeninfo *var,
struct pxafb_info *);
static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
-static void setup_base_frame(struct pxafb_info *fbi, int branch);
+static void setup_base_frame(struct pxafb_info *fbi,
+ struct fb_var_screeninfo *var, int branch);
static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
unsigned long offset, size_t size);
@@ -397,6 +398,7 @@
var->lower_margin = mode->lower_margin;
var->sync = mode->sync;
var->grayscale = mode->cmap_greyscale;
+ var->transp.length = mode->transparency;
/* set the initial RGBA bitfields */
pxafb_set_pixfmt(var, mode->depth);
@@ -531,12 +533,22 @@
struct fb_info *info)
{
struct pxafb_info *fbi = (struct pxafb_info *)info;
+ struct fb_var_screeninfo newvar;
int dma = DMA_MAX + DMA_BASE;
if (fbi->state != C_ENABLE)
return 0;
- setup_base_frame(fbi, 1);
+ /* Only take .xoffset, .yoffset and .vmode & FB_VMODE_YWRAP from what
+ * was passed in and copy the rest from the old screeninfo.
+ */
+ memcpy(&newvar, &fbi->fb.var, sizeof(newvar));
+ newvar.xoffset = var->xoffset;
+ newvar.yoffset = var->yoffset;
+ newvar.vmode &= ~FB_VMODE_YWRAP;
+ newvar.vmode |= var->vmode & FB_VMODE_YWRAP;
+
+ setup_base_frame(fbi, &newvar, 1);
if (fbi->lccr0 & LCCR0_SDS)
lcd_writel(fbi, FBR1, fbi->fdadr[dma + 1] | 0x1);
@@ -1052,9 +1064,10 @@
return 0;
}
-static void setup_base_frame(struct pxafb_info *fbi, int branch)
+static void setup_base_frame(struct pxafb_info *fbi,
+ struct fb_var_screeninfo *var,
+ int branch)
{
- struct fb_var_screeninfo *var = &fbi->fb.var;
struct fb_fix_screeninfo *fix = &fbi->fb.fix;
int nbytes, dma, pal, bpp = var->bits_per_pixel;
unsigned long offset;
@@ -1332,7 +1345,7 @@
#endif
setup_parallel_timing(fbi, var);
- setup_base_frame(fbi, 0);
+ setup_base_frame(fbi, var, 0);
fbi->reg_lccr0 = fbi->lccr0 |
(LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h
index c63b65c..0aa3a1a 100644
--- a/include/linux/mfd/da903x.h
+++ b/include/linux/mfd/da903x.h
@@ -96,6 +96,10 @@
int y_inverted;
};
+struct da9034_backlight_pdata {
+ int output_current; /* output current of WLED, from 0-31 (in mA) */
+};
+
/* DA9030 battery charger data */
struct power_supply_info;
diff --git a/drivers/mfd/mcp.h b/include/linux/mfd/mcp.h
similarity index 97%
rename from drivers/mfd/mcp.h
rename to include/linux/mfd/mcp.h
index c093a93..ee496708 100644
--- a/drivers/mfd/mcp.h
+++ b/include/linux/mfd/mcp.h
@@ -10,6 +10,8 @@
#ifndef MCP_H
#define MCP_H
+#include <mach/dma.h>
+
struct mcp_ops;
struct mcp {
@@ -24,6 +26,7 @@
dma_device_t dma_telco_rd;
dma_device_t dma_telco_wr;
struct device attached_device;
+ int gpio_base;
};
struct mcp_ops {
diff --git a/drivers/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
similarity index 98%
rename from drivers/mfd/ucb1x00.h
rename to include/linux/mfd/ucb1x00.h
index a8ad8a0..aa9c378 100644
--- a/drivers/mfd/ucb1x00.h
+++ b/include/linux/mfd/ucb1x00.h
@@ -1,5 +1,5 @@
/*
- * linux/drivers/mfd/ucb1x00.h
+ * linux/include/mfd/ucb1x00.h
*
* Copyright (C) 2001 Russell King, All Rights Reserved.
*
@@ -10,6 +10,9 @@
#ifndef UCB1200_H
#define UCB1200_H
+#include <linux/mfd/mcp.h>
+#include <linux/gpio.h>
+
#define UCB_IO_DATA 0x00
#define UCB_IO_DIR 0x01
@@ -100,7 +103,6 @@
#define UCB_MODE_DYN_VFLAG_ENA (1 << 12)
#define UCB_MODE_AUD_OFF_CAN (1 << 13)
-#include "mcp.h"
struct ucb1x00_irq {
void *devid;
@@ -123,6 +125,7 @@
struct device dev;
struct list_head node;
struct list_head devs;
+ struct gpio_chip gpio;
};
struct ucb1x00_driver;
diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
index b5cc72f..8c2f385 100644
--- a/include/video/pxa168fb.h
+++ b/include/video/pxa168fb.h
@@ -117,8 +117,6 @@
unsigned invert_composite_blank:1;
unsigned invert_pix_val_ena:1;
unsigned invert_pixclock:1;
- unsigned invert_vsync:1;
- unsigned invert_hsync:1;
unsigned panel_rbswap:1;
unsigned active:1;
unsigned enable_lcd:1;