| # |
| # HID driver configuration |
| # |
| menuconfig HID_SUPPORT |
| bool "HID Devices" |
| depends on INPUT |
| default y |
| ---help--- |
| Say Y here to get to see options for various computer-human interface |
| device drivers. This option alone does not add any kernel code. |
| |
| If you say N, all options in this submenu will be skipped and disabled. |
| |
| if HID_SUPPORT |
| |
| config HID |
| tristate "Generic HID support" |
| depends on INPUT |
| default y |
| ---help--- |
| A human interface device (HID) is a type of computer device that |
| interacts directly with and takes input from humans. The term "HID" |
| most commonly used to refer to the USB-HID specification, but other |
| devices (such as, but not strictly limited to, Bluetooth) are |
| designed using HID specification (this involves certain keyboards, |
| mice, tablets, etc). This option compiles into kernel the generic |
| HID layer code (parser, usages, etc.), which can then be used by |
| transport-specific HID implementation (like USB or Bluetooth). |
| |
| For docs and specs, see http://www.usb.org/developers/hidpage/ |
| |
| If unsure, say Y. |
| |
| config HID_DEBUG |
| bool "HID debugging support" |
| default y |
| depends on HID |
| ---help--- |
| This option lets the HID layer output diagnostics about its internal |
| state, resolve HID usages, dump HID fields, etc. Individual HID drivers |
| use this debugging facility to output information about individual HID |
| devices, etc. |
| |
| This feature is useful for those who are either debugging the HID parser |
| or any HID hardware device. |
| |
| If unsure, say Y. |
| |
| config HIDRAW |
| bool "/dev/hidraw raw HID device support" |
| depends on HID |
| ---help--- |
| Say Y here if you want to support HID devices (from the USB |
| specification standpoint) that aren't strictly user interface |
| devices, like monitor controls and Uninterruptable Power Supplies. |
| |
| This module supports these devices separately using a separate |
| event interface on /dev/hidraw. |
| |
| There is also a /dev/hiddev configuration option in the USB HID |
| configuration menu. In comparison to hiddev, this device does not process |
| the hid events at all (no parsing, no lookups). This lets applications |
| to work on raw hid events when they want to, and avoid using transport-specific |
| userspace libhid/libusb libraries. |
| |
| If unsure, say Y. |
| |
| source "drivers/hid/usbhid/Kconfig" |
| |
| menu "Special HID drivers" |
| depends on HID |
| |
| config HID_A4TECH |
| tristate "A4 tech" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for A4 tech X5 and WOP-35 / Trust 450L mice. |
| |
| config HID_APPLE |
| tristate "Apple" if EMBEDDED |
| depends on (USB_HID || BT_HIDP) |
| default !EMBEDDED |
| ---help--- |
| Support for some Apple devices which less or more break |
| HID specification. |
| |
| Say Y here if you want support for keyboards of Apple iBooks, PowerBooks, |
| MacBooks, MacBook Pros and Apple Aluminum. |
| |
| config HID_BELKIN |
| tristate "Belkin" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Belkin Flip KVM and Wireless keyboard. |
| |
| config HID_CHERRY |
| tristate "Cherry" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Cherry Cymotion keyboard. |
| |
| config HID_CHICONY |
| tristate "Chicony" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Chicony Tactical pad. |
| |
| config HID_CYPRESS |
| tristate "Cypress" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for cypress mouse and barcode readers. |
| |
| config HID_DRAGONRISE |
| tristate "DragonRise Inc. support" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Say Y here if you have DragonRise Inc.game controllers. |
| |
| config DRAGONRISE_FF |
| bool "DragonRise Inc. force feedback support" |
| depends on HID_DRAGONRISE |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you want to enable force feedback support for DragonRise Inc. |
| game controllers. |
| |
| config HID_EZKEY |
| tristate "Ezkey" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Ezkey BTC 8193 keyboard. |
| |
| config HID_KYE |
| tristate "Kye" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Kye/Genius Ergo Mouse. |
| |
| config HID_GYRATION |
| tristate "Gyration" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Gyration remote control. |
| |
| config HID_KENSINGTON |
| tristate "Kensington" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Kensington Slimblade Trackball. |
| |
| config HID_LOGITECH |
| tristate "Logitech" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Logitech devices that are not fully compliant with HID standard. |
| |
| config LOGITECH_FF |
| bool "Logitech force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you have one of these devices: |
| - Logitech WingMan Cordless RumblePad |
| - Logitech WingMan Cordless RumblePad 2 |
| - Logitech WingMan Force 3D |
| - Logitech Formula Force EX |
| - Logitech WingMan Formula Force GP |
| - Logitech MOMO Force wheel |
| |
| and if you want to enable force feedback for them. |
| Note: if you say N here, this device will still be supported, but without |
| force feedback. |
| |
| config LOGIRUMBLEPAD2_FF |
| bool "Logitech Rumblepad 2 force feedback support" |
| depends on HID_LOGITECH |
| select INPUT_FF_MEMLESS |
| help |
| Say Y here if you want to enable force feedback support for Logitech |
| Rumblepad 2 devices. |
| |
| config HID_MICROSOFT |
| tristate "Microsoft" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Microsoft devices that are not fully compliant with HID standard. |
| |
| config HID_MONTEREY |
| tristate "Monterey" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Monterey Genius KB29E. |
| |
| config HID_NTRIG |
| tristate "NTrig" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for N-Trig touch screen. |
| |
| config HID_PANTHERLORD |
| tristate "Pantherlord devices support" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for PantherLord/GreenAsia based device support. |
| |
| config HID_PANTHERLORD |
| tristate "Pantherlord support" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Say Y here if you have a PantherLord/GreenAsia based game controller |
| or adapter. |
| |
| config PANTHERLORD_FF |
| bool "Pantherlord force feedback support" |
| depends on HID_PANTHERLORD |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a PantherLord/GreenAsia based game controller |
| or adapter and want to enable force feedback support for it. |
| |
| config HID_PETALYNX |
| tristate "Petalynx" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Petalynx Maxter remote control. |
| |
| config HID_SAMSUNG |
| tristate "Samsung" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Samsung InfraRed remote control. |
| |
| config HID_SONY |
| tristate "Sony" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Sony PS3 controller. |
| |
| config HID_SUNPLUS |
| tristate "Sunplus" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for Sunplus wireless desktop. |
| |
| config HID_GREENASIA |
| tristate "GreenAsia (Product ID 0x12) support" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game |
| controller or adapter. |
| |
| config GREENASIA_FF |
| bool "GreenAsia (Product ID 0x12) force feedback support" |
| depends on HID_GREENASIA |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a GreenAsia (Product ID 0x12) based game controller |
| (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter |
| and want to enable force feedback support for it. |
| |
| config HID_SMARTJOYPLUS |
| tristate "SmartJoy PLUS PS2/USB adapter support" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Support for SmartJoy PLUS PS2/USB adapter. |
| |
| config SMARTJOYPLUS_FF |
| bool "SmartJoy PLUS PS2/USB adapter force feedback support" |
| depends on HID_SMARTJOYPLUS |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to |
| enable force feedback support for it. |
| |
| config HID_TOPSEED |
| tristate "TopSeed Cyberlink remote control support" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Say Y if you have a TopSeed Cyberlink remote control. |
| |
| config HID_THRUSTMASTER |
| tristate "ThrustMaster devices support" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or |
| a THRUSTMASTER Ferrari GT Rumble Wheel. |
| |
| config THRUSTMASTER_FF |
| bool "ThrustMaster devices force feedback support" |
| depends on HID_THRUSTMASTER |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2 or 3, |
| a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari GT |
| Rumble Force or Force Feedback Wheel. |
| |
| config HID_WACOM |
| tristate "Wacom Bluetooth devices support" if EMBEDDED |
| depends on BT_HIDP |
| default !EMBEDDED |
| ---help--- |
| Support for Wacom Graphire Bluetooth tablet. |
| |
| config HID_ZEROPLUS |
| tristate "Zeroplus based game controller support" if EMBEDDED |
| depends on USB_HID |
| default !EMBEDDED |
| ---help--- |
| Say Y here if you have a Zeroplus based game controller. |
| |
| config ZEROPLUS_FF |
| bool "Zeroplus based game controller force feedback support" |
| depends on HID_ZEROPLUS |
| select INPUT_FF_MEMLESS |
| ---help--- |
| Say Y here if you have a Zeroplus based game controller and want |
| to have force feedback support for it. |
| |
| endmenu |
| |
| endif # HID_SUPPORT |