| /* |
| * This file contains the routines setting up the linux page tables. |
| * |
| * Copyright (C) 2008 Michal Simek |
| * Copyright (C) 2008 PetaLogix |
| * |
| * Copyright (C) 2007 Xilinx, Inc. All rights reserved. |
| * |
| * Derived from arch/ppc/mm/pgtable.c: |
| * -- paulus |
| * |
| * Derived from arch/ppc/mm/init.c: |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) |
| * |
| * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) |
| * and Cort Dougan (PReP) (cort@cs.nmt.edu) |
| * Copyright (C) 1996 Paul Mackerras |
| * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). |
| * |
| * Derived from "arch/i386/mm/init.c" |
| * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file COPYING in the main directory of this |
| * archive for more details. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/vmalloc.h> |
| #include <linux/init.h> |
| |
| #include <asm/pgtable.h> |
| #include <asm/pgalloc.h> |
| #include <linux/io.h> |
| #include <asm/mmu.h> |
| #include <asm/sections.h> |
| |
| #define flush_HPTE(X, va, pg) _tlbie(va) |
| |
| unsigned long ioremap_base; |
| unsigned long ioremap_bot; |
| |
| /* The maximum lowmem defaults to 768Mb, but this can be configured to |
| * another value. |
| */ |
| #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE |
| |
| #ifndef CONFIG_SMP |
| struct pgtable_cache_struct quicklists; |
| #endif |
| |
| static void __iomem *__ioremap(phys_addr_t addr, unsigned long size, |
| unsigned long flags) |
| { |
| unsigned long v, i; |
| phys_addr_t p; |
| int err; |
| |
| /* |
| * Choose an address to map it to. |
| * Once the vmalloc system is running, we use it. |
| * Before then, we use space going down from ioremap_base |
| * (ioremap_bot records where we're up to). |
| */ |
| p = addr & PAGE_MASK; |
| size = PAGE_ALIGN(addr + size) - p; |
| |
| /* |
| * Don't allow anybody to remap normal RAM that we're using. |
| * mem_init() sets high_memory so only do the check after that. |
| * |
| * However, allow remap of rootfs: TBD |
| */ |
| if (mem_init_done && |
| p >= memory_start && p < virt_to_phys(high_memory) && |
| !(p >= virt_to_phys((unsigned long)&__bss_stop) && |
| p < virt_to_phys((unsigned long)__bss_stop))) { |
| printk(KERN_WARNING "__ioremap(): phys addr "PTE_FMT |
| " is RAM lr %p\n", (unsigned long)p, |
| __builtin_return_address(0)); |
| return NULL; |
| } |
| |
| if (size == 0) |
| return NULL; |
| |
| /* |
| * Is it already mapped? If the whole area is mapped then we're |
| * done, otherwise remap it since we want to keep the virt addrs for |
| * each request contiguous. |
| * |
| * We make the assumption here that if the bottom and top |
| * of the range we want are mapped then it's mapped to the |
| * same virt address (and this is contiguous). |
| * -- Cort |
| */ |
| |
| if (mem_init_done) { |
| struct vm_struct *area; |
| area = get_vm_area(size, VM_IOREMAP); |
| if (area == NULL) |
| return NULL; |
| v = (unsigned long) area->addr; |
| } else { |
| v = (ioremap_bot -= size); |
| } |
| |
| if ((flags & _PAGE_PRESENT) == 0) |
| flags |= _PAGE_KERNEL; |
| if (flags & _PAGE_NO_CACHE) |
| flags |= _PAGE_GUARDED; |
| |
| err = 0; |
| for (i = 0; i < size && err == 0; i += PAGE_SIZE) |
| err = map_page(v + i, p + i, flags); |
| if (err) { |
| if (mem_init_done) |
| vfree((void *)v); |
| return NULL; |
| } |
| |
| return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK)); |
| } |
| |
| void __iomem *ioremap(phys_addr_t addr, unsigned long size) |
| { |
| return __ioremap(addr, size, _PAGE_NO_CACHE); |
| } |
| EXPORT_SYMBOL(ioremap); |
| |
| void iounmap(void *addr) |
| { |
| if (addr > high_memory && (unsigned long) addr < ioremap_bot) |
| vfree((void *) (PAGE_MASK & (unsigned long) addr)); |
| } |
| EXPORT_SYMBOL(iounmap); |
| |
| |
| int map_page(unsigned long va, phys_addr_t pa, int flags) |
| { |
| pmd_t *pd; |
| pte_t *pg; |
| int err = -ENOMEM; |
| /* Use upper 10 bits of VA to index the first level map */ |
| pd = pmd_offset(pgd_offset_k(va), va); |
| /* Use middle 10 bits of VA to index the second-level map */ |
| pg = pte_alloc_kernel(pd, va); /* from powerpc - pgtable.c */ |
| /* pg = pte_alloc_kernel(&init_mm, pd, va); */ |
| |
| if (pg != NULL) { |
| err = 0; |
| set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, |
| __pgprot(flags))); |
| if (unlikely(mem_init_done)) |
| flush_HPTE(0, va, pmd_val(*pd)); |
| /* flush_HPTE(0, va, pg); */ |
| } |
| return err; |
| } |
| |
| void __init adjust_total_lowmem(void) |
| { |
| /* TBD */ |
| #if 0 |
| unsigned long max_low_mem = MAX_LOW_MEM; |
| |
| if (total_lowmem > max_low_mem) { |
| total_lowmem = max_low_mem; |
| #ifndef CONFIG_HIGHMEM |
| printk(KERN_INFO "Warning, memory limited to %ld Mb, use " |
| "CONFIG_HIGHMEM to reach %ld Mb\n", |
| max_low_mem >> 20, total_memory >> 20); |
| total_memory = total_lowmem; |
| #endif /* CONFIG_HIGHMEM */ |
| } |
| #endif |
| } |
| |
| /* |
| * Map in all of physical memory starting at CONFIG_KERNEL_START. |
| */ |
| void __init mapin_ram(void) |
| { |
| unsigned long v, p, s, f; |
| |
| v = CONFIG_KERNEL_START; |
| p = memory_start; |
| for (s = 0; s < memory_size; s += PAGE_SIZE) { |
| f = _PAGE_PRESENT | _PAGE_ACCESSED | |
| _PAGE_SHARED | _PAGE_HWEXEC; |
| if ((char *) v < _stext || (char *) v >= _etext) |
| f |= _PAGE_WRENABLE; |
| else |
| /* On the MicroBlaze, no user access |
| forces R/W kernel access */ |
| f |= _PAGE_USER; |
| map_page(v, p, f); |
| v += PAGE_SIZE; |
| p += PAGE_SIZE; |
| } |
| } |
| |
| /* is x a power of 2? */ |
| #define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0)) |
| |
| /* |
| * Set up a mapping for a block of I/O. |
| * virt, phys, size must all be page-aligned. |
| * This should only be called before ioremap is called. |
| */ |
| void __init io_block_mapping(unsigned long virt, phys_addr_t phys, |
| unsigned int size, int flags) |
| { |
| int i; |
| |
| if (virt > CONFIG_KERNEL_START && virt < ioremap_bot) |
| ioremap_bot = ioremap_base = virt; |
| |
| /* Put it in the page tables. */ |
| for (i = 0; i < size; i += PAGE_SIZE) |
| map_page(virt + i, phys + i, flags); |
| } |
| |
| /* Scan the real Linux page tables and return a PTE pointer for |
| * a virtual address in a context. |
| * Returns true (1) if PTE was found, zero otherwise. The pointer to |
| * the PTE pointer is unmodified if PTE is not found. |
| */ |
| static int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep) |
| { |
| pgd_t *pgd; |
| pmd_t *pmd; |
| pte_t *pte; |
| int retval = 0; |
| |
| pgd = pgd_offset(mm, addr & PAGE_MASK); |
| if (pgd) { |
| pmd = pmd_offset(pgd, addr & PAGE_MASK); |
| if (pmd_present(*pmd)) { |
| pte = pte_offset_kernel(pmd, addr & PAGE_MASK); |
| if (pte) { |
| retval = 1; |
| *ptep = pte; |
| } |
| } |
| } |
| return retval; |
| } |
| |
| /* Find physical address for this virtual address. Normally used by |
| * I/O functions, but anyone can call it. |
| */ |
| unsigned long iopa(unsigned long addr) |
| { |
| unsigned long pa; |
| |
| pte_t *pte; |
| struct mm_struct *mm; |
| |
| /* Allow mapping of user addresses (within the thread) |
| * for DMA if necessary. |
| */ |
| if (addr < TASK_SIZE) |
| mm = current->mm; |
| else |
| mm = &init_mm; |
| |
| pa = 0; |
| if (get_pteptr(mm, addr, &pte)) |
| pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK); |
| |
| return pa; |
| } |