ath9k: Use ah_curchan and remove sc_curchan which is redundant
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath9k/core.c b/drivers/net/wireless/ath9k/core.c
index 9b8258d..87b4ca5 100644
--- a/drivers/net/wireless/ath9k/core.c
+++ b/drivers/net/wireless/ath9k/core.c
@@ -322,16 +322,16 @@
DPRINTF(sc, ATH_DBG_CONFIG,
"%s: %u (%u MHz) -> %u (%u MHz), cflags:%x\n",
__func__,
- ath9k_hw_mhz2ieee(ah, sc->sc_curchan.channel,
- sc->sc_curchan.channelFlags),
- sc->sc_curchan.channel,
+ ath9k_hw_mhz2ieee(ah, sc->sc_ah->ah_curchan->channel,
+ sc->sc_ah->ah_curchan->channelFlags),
+ sc->sc_ah->ah_curchan->channel,
ath9k_hw_mhz2ieee(ah, hchan->channel, hchan->channelFlags),
hchan->channel, hchan->channelFlags);
ht_macmode = ath_cwm_macmode(sc);
- if (hchan->channel != sc->sc_curchan.channel ||
- hchan->channelFlags != sc->sc_curchan.channelFlags ||
+ if (hchan->channel != sc->sc_ah->ah_curchan->channel ||
+ hchan->channelFlags != sc->sc_ah->ah_curchan->channelFlags ||
(sc->sc_flags & SC_OP_CHAINMASK_UPDATE) ||
(sc->sc_flags & SC_OP_FULL_RESET)) {
int status;
@@ -372,7 +372,6 @@
}
spin_unlock_bh(&sc->sc_resetlock);
- sc->sc_curchan = *hchan;
sc->sc_flags &= ~SC_OP_CHAINMASK_UPDATE;
sc->sc_flags &= ~SC_OP_FULL_RESET;
@@ -702,16 +701,15 @@
* be followed by initialization of the appropriate bits
* and then setup of the interrupt mask.
*/
- sc->sc_curchan = *initial_chan;
spin_lock_bh(&sc->sc_resetlock);
- if (!ath9k_hw_reset(ah, &sc->sc_curchan, ht_macmode,
+ if (!ath9k_hw_reset(ah, initial_chan, ht_macmode,
sc->sc_tx_chainmask, sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing, false, &status)) {
DPRINTF(sc, ATH_DBG_FATAL,
"%s: unable to reset hardware; hal status %u "
"(freq %u flags 0x%x)\n", __func__, status,
- sc->sc_curchan.channel, sc->sc_curchan.channelFlags);
+ initial_chan->channel, initial_chan->channelFlags);
error = -EIO;
spin_unlock_bh(&sc->sc_resetlock);
goto done;
@@ -793,7 +791,7 @@
/* Reset chip */
spin_lock_bh(&sc->sc_resetlock);
- if (!ath9k_hw_reset(ah, &sc->sc_curchan,
+ if (!ath9k_hw_reset(ah, sc->sc_ah->ah_curchan,
ht_macmode,
sc->sc_tx_chainmask, sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing, false, &status)) {
@@ -813,7 +811,7 @@
* that changes the channel so update any state that
* might change as a result.
*/
- ath_setcurmode(sc, ath_chan2mode(&sc->sc_curchan));
+ ath_setcurmode(sc, ath_chan2mode(sc->sc_ah->ah_curchan));
ath_update_txpow(sc);
diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index 702f7b8..7f4bd15 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -1001,7 +1001,6 @@
/* Channel, Band */
struct ieee80211_channel channels[IEEE80211_NUM_BANDS][ATH_CHAN_MAX];
struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
- struct ath9k_channel sc_curchan;
/* Locks */
spinlock_t sc_rxflushlock;
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index 20e1084..1392361 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -847,9 +847,9 @@
/* For half and quarter rate channles use different
* rate tables
*/
- if (sc->sc_curchan.channelFlags & CHANNEL_HALF)
+ if (sc->sc_ah->ah_curchan->channelFlags & CHANNEL_HALF)
ar5416_sethalf_ratetable(asc);
- else if (sc->sc_curchan.channelFlags & CHANNEL_QUARTER)
+ else if (sc->sc_ah->ah_curchan->channelFlags & CHANNEL_QUARTER)
ar5416_setquarter_ratetable(asc);
else /* full rate */
ar5416_setfull_ratetable(asc);
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 75a8492..9ea5d93 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -1456,7 +1456,7 @@
spin_lock_bh(&sc->sc_resetlock);
if (!ath9k_hw_reset(ah,
- &sc->sc_curchan, ht_macmode,
+ sc->sc_ah->ah_curchan, ht_macmode,
sc->sc_tx_chainmask, sc->sc_rx_chainmask,
sc->sc_ht_extprotspacing, true, &status)) {