* use 'unsigned long' as address supplied to au_write[bwl]()
* remove two already unused and commented structures
* added an ULL suffix to several address constants that use bits 35-32
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index a662b24..cd6719c 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -60,34 +60,34 @@
mdelay(ms);
}
-void static inline au_writeb(u8 val, int reg)
+void static inline au_writeb(u8 val, unsigned long reg)
{
*(volatile u8 *)(reg) = val;
}
-void static inline au_writew(u16 val, int reg)
+void static inline au_writew(u16 val, unsigned long reg)
{
*(volatile u16 *)(reg) = val;
}
-void static inline au_writel(u32 val, int reg)
+void static inline au_writel(u32 val, unsigned long reg)
{
*(volatile u32 *)(reg) = val;
}
-static inline u8 au_readb(unsigned long port)
+static inline u8 au_readb(unsigned long reg)
{
- return (*(volatile u8 *)port);
+ return (*(volatile u8 *)reg);
}
-static inline u16 au_readw(unsigned long port)
+static inline u16 au_readw(unsigned long reg)
{
- return (*(volatile u16 *)port);
+ return (*(volatile u16 *)reg);
}
-static inline u32 au_readl(unsigned long port)
+static inline u32 au_readl(unsigned long reg)
{
- return (*(volatile u32 *)port);
+ return (*(volatile u32 *)reg);
}
/* These next three functions should be a generic part of the MIPS
@@ -181,26 +181,6 @@
#define MEM_SDSLEEP (0x0030)
#define MEM_SDSMCKE (0x0034)
-#ifndef ASSEMBLER
-/*typedef volatile struct
-{
- uint32 sdmode0;
- uint32 sdmode1;
- uint32 sdmode2;
- uint32 sdaddr0;
- uint32 sdaddr1;
- uint32 sdaddr2;
- uint32 sdrefcfg;
- uint32 sdautoref;
- uint32 sdwrmd0;
- uint32 sdwrmd1;
- uint32 sdwrmd2;
- uint32 sdsleep;
- uint32 sdsmcke;
-
-} AU1X00_SDRAM;*/
-#endif
-
/*
* MEM_SDMODE register content definitions
*/
@@ -286,49 +266,6 @@
#define MEM_SDSREF (0x08D0)
#define MEM_SDSLEEP MEM_SDSREF
-#ifndef ASSEMBLER
-/*typedef volatile struct
-{
- uint32 sdmode0;
- uint32 reserved0;
- uint32 sdmode1;
- uint32 reserved1;
- uint32 sdmode2;
- uint32 reserved2[3];
- uint32 sdaddr0;
- uint32 reserved3;
- uint32 sdaddr1;
- uint32 reserved4;
- uint32 sdaddr2;
- uint32 reserved5[3];
- uint32 sdconfiga;
- uint32 reserved6;
- uint32 sdconfigb;
- uint32 reserved7;
- uint32 sdstat;
- uint32 reserved8;
- uint32 sderraddr;
- uint32 reserved9;
- uint32 sdstride0;
- uint32 reserved10;
- uint32 sdstride1;
- uint32 reserved11;
- uint32 sdstride2;
- uint32 reserved12[3];
- uint32 sdwrmd0;
- uint32 reserved13;
- uint32 sdwrmd1;
- uint32 reserved14;
- uint32 sdwrmd2;
- uint32 reserved15[11];
- uint32 sdprecmd;
- uint32 reserved16;
- uint32 sdautoref;
- uint32 reserved17;
- uint32 sdsref;
-
-} AU1550_SDRAM;*/
-#endif
#endif
/*
@@ -365,9 +302,9 @@
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#define SYS_PHYS_ADDR 0x11900000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
@@ -399,13 +336,13 @@
#define UART3_PHYS_ADDR 0x11400000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
-#define PCI_MEM_PHYS_ADDR 0x400000000
-#define PCI_IO_PHYS_ADDR 0x500000000
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
@@ -442,9 +379,9 @@
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define LCD_PHYS_ADDR 0x15000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
@@ -473,13 +410,13 @@
#define PSC1_PHYS_ADDR 0x11B00000
#define PSC2_PHYS_ADDR 0x10A00000
#define PSC3_PHYS_ADDR 0x10B00000
-#define PCI_MEM_PHYS_ADDR 0x400000000
-#define PCI_IO_PHYS_ADDR 0x500000000
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
@@ -500,15 +437,15 @@
#define DDMA_PHYS_ADDR 0x14002000
#define PSC0_PHYS_ADDR 0x11A00000
#define PSC1_PHYS_ADDR 0x11B00000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000
#define SD0_PHYS_ADDR 0x10600000
#define SD1_PHYS_ADDR 0x10680000
#define LCD_PHYS_ADDR 0x15000000
#define SWCNT_PHYS_ADDR 0x1110010C
#define MAEFE_PHYS_ADDR 0x14012000
#define MAEBE_PHYS_ADDR 0x14010000
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif