| /* |
| Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> |
| Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> |
| Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com> |
| Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> |
| Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com> |
| Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> |
| Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com> |
| Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> |
| Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com> |
| <http://rt2x00.serialmonkey.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the |
| Free Software Foundation, Inc., |
| 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* |
| Module: rt2800 |
| Abstract: Data structures and registers for the rt2800 modules. |
| Supported chipsets: RT2800E, RT2800ED & RT2800U. |
| */ |
| |
| #ifndef RT2800_H |
| #define RT2800_H |
| |
| /* |
| * RF chip defines. |
| * |
| * RF2820 2.4G 2T3R |
| * RF2850 2.4G/5G 2T3R |
| * RF2720 2.4G 1T2R |
| * RF2750 2.4G/5G 1T2R |
| * RF3020 2.4G 1T1R |
| * RF2020 2.4G B/G |
| * RF3021 2.4G 1T2R |
| * RF3022 2.4G 2T2R |
| * RF3052 2.4G/5G 2T2R |
| * RF2853 2.4G/5G 3T3R |
| * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390) |
| * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392) |
| * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662) |
| * RF5370 2.4G 1T1R |
| * RF5390 2.4G 1T1R |
| */ |
| #define RF2820 0x0001 |
| #define RF2850 0x0002 |
| #define RF2720 0x0003 |
| #define RF2750 0x0004 |
| #define RF3020 0x0005 |
| #define RF2020 0x0006 |
| #define RF3021 0x0007 |
| #define RF3022 0x0008 |
| #define RF3052 0x0009 |
| #define RF2853 0x000a |
| #define RF3320 0x000b |
| #define RF3322 0x000c |
| #define RF3053 0x000d |
| #define RF5370 0x5370 |
| #define RF5390 0x5390 |
| |
| /* |
| * Chipset revisions. |
| */ |
| #define REV_RT2860C 0x0100 |
| #define REV_RT2860D 0x0101 |
| #define REV_RT2872E 0x0200 |
| #define REV_RT3070E 0x0200 |
| #define REV_RT3070F 0x0201 |
| #define REV_RT3071E 0x0211 |
| #define REV_RT3090E 0x0211 |
| #define REV_RT3390E 0x0211 |
| #define REV_RT5390F 0x0502 |
| |
| /* |
| * Signal information. |
| * Default offset is required for RSSI <-> dBm conversion. |
| */ |
| #define DEFAULT_RSSI_OFFSET 120 |
| |
| /* |
| * Register layout information. |
| */ |
| #define CSR_REG_BASE 0x1000 |
| #define CSR_REG_SIZE 0x0800 |
| #define EEPROM_BASE 0x0000 |
| #define EEPROM_SIZE 0x0110 |
| #define BBP_BASE 0x0000 |
| #define BBP_SIZE 0x0080 |
| #define RF_BASE 0x0004 |
| #define RF_SIZE 0x0010 |
| |
| /* |
| * Number of TX queues. |
| */ |
| #define NUM_TX_QUEUES 4 |
| |
| /* |
| * Registers. |
| */ |
| |
| /* |
| * E2PROM_CSR: PCI EEPROM control register. |
| * RELOAD: Write 1 to reload eeprom content. |
| * TYPE: 0: 93c46, 1:93c66. |
| * LOAD_STATUS: 1:loading, 0:done. |
| */ |
| #define E2PROM_CSR 0x0004 |
| #define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000001) |
| #define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000002) |
| #define E2PROM_CSR_DATA_IN FIELD32(0x00000004) |
| #define E2PROM_CSR_DATA_OUT FIELD32(0x00000008) |
| #define E2PROM_CSR_TYPE FIELD32(0x00000030) |
| #define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040) |
| #define E2PROM_CSR_RELOAD FIELD32(0x00000080) |
| |
| /* |
| * AUX_CTRL: Aux/PCI-E related configuration |
| */ |
| #define AUX_CTRL 0x10c |
| #define AUX_CTRL_WAKE_PCIE_EN FIELD32(0x00000002) |
| #define AUX_CTRL_FORCE_PCIE_CLK FIELD32(0x00000400) |
| |
| /* |
| * OPT_14: Unknown register used by rt3xxx devices. |
| */ |
| #define OPT_14_CSR 0x0114 |
| #define OPT_14_CSR_BIT0 FIELD32(0x00000001) |
| |
| /* |
| * INT_SOURCE_CSR: Interrupt source register. |
| * Write one to clear corresponding bit. |
| * TX_FIFO_STATUS: FIFO Statistics is full, sw should read TX_STA_FIFO |
| */ |
| #define INT_SOURCE_CSR 0x0200 |
| #define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) |
| #define INT_SOURCE_CSR_TXDELAYINT FIELD32(0x00000002) |
| #define INT_SOURCE_CSR_RX_DONE FIELD32(0x00000004) |
| #define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00000008) |
| #define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00000010) |
| #define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00000020) |
| #define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00000040) |
| #define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00000080) |
| #define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00000100) |
| #define INT_SOURCE_CSR_MCU_COMMAND FIELD32(0x00000200) |
| #define INT_SOURCE_CSR_RXTX_COHERENT FIELD32(0x00000400) |
| #define INT_SOURCE_CSR_TBTT FIELD32(0x00000800) |
| #define INT_SOURCE_CSR_PRE_TBTT FIELD32(0x00001000) |
| #define INT_SOURCE_CSR_TX_FIFO_STATUS FIELD32(0x00002000) |
| #define INT_SOURCE_CSR_AUTO_WAKEUP FIELD32(0x00004000) |
| #define INT_SOURCE_CSR_GPTIMER FIELD32(0x00008000) |
| #define INT_SOURCE_CSR_RX_COHERENT FIELD32(0x00010000) |
| #define INT_SOURCE_CSR_TX_COHERENT FIELD32(0x00020000) |
| |
| /* |
| * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF. |
| */ |
| #define INT_MASK_CSR 0x0204 |
| #define INT_MASK_CSR_RXDELAYINT FIELD32(0x00000001) |
| #define INT_MASK_CSR_TXDELAYINT FIELD32(0x00000002) |
| #define INT_MASK_CSR_RX_DONE FIELD32(0x00000004) |
| #define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00000008) |
| #define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00000010) |
| #define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00000020) |
| #define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00000040) |
| #define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00000080) |
| #define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00000100) |
| #define INT_MASK_CSR_MCU_COMMAND FIELD32(0x00000200) |
| #define INT_MASK_CSR_RXTX_COHERENT FIELD32(0x00000400) |
| #define INT_MASK_CSR_TBTT FIELD32(0x00000800) |
| #define INT_MASK_CSR_PRE_TBTT FIELD32(0x00001000) |
| #define INT_MASK_CSR_TX_FIFO_STATUS FIELD32(0x00002000) |
| #define INT_MASK_CSR_AUTO_WAKEUP FIELD32(0x00004000) |
| #define INT_MASK_CSR_GPTIMER FIELD32(0x00008000) |
| #define INT_MASK_CSR_RX_COHERENT FIELD32(0x00010000) |
| #define INT_MASK_CSR_TX_COHERENT FIELD32(0x00020000) |
| |
| /* |
| * WPDMA_GLO_CFG |
| */ |
| #define WPDMA_GLO_CFG 0x0208 |
| #define WPDMA_GLO_CFG_ENABLE_TX_DMA FIELD32(0x00000001) |
| #define WPDMA_GLO_CFG_TX_DMA_BUSY FIELD32(0x00000002) |
| #define WPDMA_GLO_CFG_ENABLE_RX_DMA FIELD32(0x00000004) |
| #define WPDMA_GLO_CFG_RX_DMA_BUSY FIELD32(0x00000008) |
| #define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE FIELD32(0x00000030) |
| #define WPDMA_GLO_CFG_TX_WRITEBACK_DONE FIELD32(0x00000040) |
| #define WPDMA_GLO_CFG_BIG_ENDIAN FIELD32(0x00000080) |
| #define WPDMA_GLO_CFG_RX_HDR_SCATTER FIELD32(0x0000ff00) |
| #define WPDMA_GLO_CFG_HDR_SEG_LEN FIELD32(0xffff0000) |
| |
| /* |
| * WPDMA_RST_IDX |
| */ |
| #define WPDMA_RST_IDX 0x020c |
| #define WPDMA_RST_IDX_DTX_IDX0 FIELD32(0x00000001) |
| #define WPDMA_RST_IDX_DTX_IDX1 FIELD32(0x00000002) |
| #define WPDMA_RST_IDX_DTX_IDX2 FIELD32(0x00000004) |
| #define WPDMA_RST_IDX_DTX_IDX3 FIELD32(0x00000008) |
| #define WPDMA_RST_IDX_DTX_IDX4 FIELD32(0x00000010) |
| #define WPDMA_RST_IDX_DTX_IDX5 FIELD32(0x00000020) |
| #define WPDMA_RST_IDX_DRX_IDX0 FIELD32(0x00010000) |
| |
| /* |
| * DELAY_INT_CFG |
| */ |
| #define DELAY_INT_CFG 0x0210 |
| #define DELAY_INT_CFG_RXMAX_PTIME FIELD32(0x000000ff) |
| #define DELAY_INT_CFG_RXMAX_PINT FIELD32(0x00007f00) |
| #define DELAY_INT_CFG_RXDLY_INT_EN FIELD32(0x00008000) |
| #define DELAY_INT_CFG_TXMAX_PTIME FIELD32(0x00ff0000) |
| #define DELAY_INT_CFG_TXMAX_PINT FIELD32(0x7f000000) |
| #define DELAY_INT_CFG_TXDLY_INT_EN FIELD32(0x80000000) |
| |
| /* |
| * WMM_AIFSN_CFG: Aifsn for each EDCA AC |
| * AIFSN0: AC_VO |
| * AIFSN1: AC_VI |
| * AIFSN2: AC_BE |
| * AIFSN3: AC_BK |
| */ |
| #define WMM_AIFSN_CFG 0x0214 |
| #define WMM_AIFSN_CFG_AIFSN0 FIELD32(0x0000000f) |
| #define WMM_AIFSN_CFG_AIFSN1 FIELD32(0x000000f0) |
| #define WMM_AIFSN_CFG_AIFSN2 FIELD32(0x00000f00) |
| #define WMM_AIFSN_CFG_AIFSN3 FIELD32(0x0000f000) |
| |
| /* |
| * WMM_CWMIN_CSR: CWmin for each EDCA AC |
| * CWMIN0: AC_VO |
| * CWMIN1: AC_VI |
| * CWMIN2: AC_BE |
| * CWMIN3: AC_BK |
| */ |
| #define WMM_CWMIN_CFG 0x0218 |
| #define WMM_CWMIN_CFG_CWMIN0 FIELD32(0x0000000f) |
| #define WMM_CWMIN_CFG_CWMIN1 FIELD32(0x000000f0) |
| #define WMM_CWMIN_CFG_CWMIN2 FIELD32(0x00000f00) |
| #define WMM_CWMIN_CFG_CWMIN3 FIELD32(0x0000f000) |
| |
| /* |
| * WMM_CWMAX_CSR: CWmax for each EDCA AC |
| * CWMAX0: AC_VO |
| * CWMAX1: AC_VI |
| * CWMAX2: AC_BE |
| * CWMAX3: AC_BK |
| */ |
| #define WMM_CWMAX_CFG 0x021c |
| #define WMM_CWMAX_CFG_CWMAX0 FIELD32(0x0000000f) |
| #define WMM_CWMAX_CFG_CWMAX1 FIELD32(0x000000f0) |
| #define WMM_CWMAX_CFG_CWMAX2 FIELD32(0x00000f00) |
| #define WMM_CWMAX_CFG_CWMAX3 FIELD32(0x0000f000) |
| |
| /* |
| * AC_TXOP0: AC_VO/AC_VI TXOP register |
| * AC0TXOP: AC_VO in unit of 32us |
| * AC1TXOP: AC_VI in unit of 32us |
| */ |
| #define WMM_TXOP0_CFG 0x0220 |
| #define WMM_TXOP0_CFG_AC0TXOP FIELD32(0x0000ffff) |
| #define WMM_TXOP0_CFG_AC1TXOP FIELD32(0xffff0000) |
| |
| /* |
| * AC_TXOP1: AC_BE/AC_BK TXOP register |
| * AC2TXOP: AC_BE in unit of 32us |
| * AC3TXOP: AC_BK in unit of 32us |
| */ |
| #define WMM_TXOP1_CFG 0x0224 |
| #define WMM_TXOP1_CFG_AC2TXOP FIELD32(0x0000ffff) |
| #define WMM_TXOP1_CFG_AC3TXOP FIELD32(0xffff0000) |
| |
| /* |
| * GPIO_CTRL_CFG: |
| * GPIOD: GPIO direction, 0: Output, 1: Input |
| */ |
| #define GPIO_CTRL_CFG 0x0228 |
| #define GPIO_CTRL_CFG_BIT0 FIELD32(0x00000001) |
| #define GPIO_CTRL_CFG_BIT1 FIELD32(0x00000002) |
| #define GPIO_CTRL_CFG_BIT2 FIELD32(0x00000004) |
| #define GPIO_CTRL_CFG_BIT3 FIELD32(0x00000008) |
| #define GPIO_CTRL_CFG_BIT4 FIELD32(0x00000010) |
| #define GPIO_CTRL_CFG_BIT5 FIELD32(0x00000020) |
| #define GPIO_CTRL_CFG_BIT6 FIELD32(0x00000040) |
| #define GPIO_CTRL_CFG_BIT7 FIELD32(0x00000080) |
| #define GPIO_CTRL_CFG_GPIOD_BIT0 FIELD32(0x00000100) |
| #define GPIO_CTRL_CFG_GPIOD_BIT1 FIELD32(0x00000200) |
| #define GPIO_CTRL_CFG_GPIOD_BIT2 FIELD32(0x00000400) |
| #define GPIO_CTRL_CFG_GPIOD_BIT3 FIELD32(0x00000800) |
| #define GPIO_CTRL_CFG_GPIOD_BIT4 FIELD32(0x00001000) |
| #define GPIO_CTRL_CFG_GPIOD_BIT5 FIELD32(0x00002000) |
| #define GPIO_CTRL_CFG_GPIOD_BIT6 FIELD32(0x00004000) |
| #define GPIO_CTRL_CFG_GPIOD_BIT7 FIELD32(0x00008000) |
| |
| /* |
| * MCU_CMD_CFG |
| */ |
| #define MCU_CMD_CFG 0x022c |
| |
| /* |
| * AC_VO register offsets |
| */ |
| #define TX_BASE_PTR0 0x0230 |
| #define TX_MAX_CNT0 0x0234 |
| #define TX_CTX_IDX0 0x0238 |
| #define TX_DTX_IDX0 0x023c |
| |
| /* |
| * AC_VI register offsets |
| */ |
| #define TX_BASE_PTR1 0x0240 |
| #define TX_MAX_CNT1 0x0244 |
| #define TX_CTX_IDX1 0x0248 |
| #define TX_DTX_IDX1 0x024c |
| |
| /* |
| * AC_BE register offsets |
| */ |
| #define TX_BASE_PTR2 0x0250 |
| #define TX_MAX_CNT2 0x0254 |
| #define TX_CTX_IDX2 0x0258 |
| #define TX_DTX_IDX2 0x025c |
| |
| /* |
| * AC_BK register offsets |
| */ |
| #define TX_BASE_PTR3 0x0260 |
| #define TX_MAX_CNT3 0x0264 |
| #define TX_CTX_IDX3 0x0268 |
| #define TX_DTX_IDX3 0x026c |
| |
| /* |
| * HCCA register offsets |
| */ |
| #define TX_BASE_PTR4 0x0270 |
| #define TX_MAX_CNT4 0x0274 |
| #define TX_CTX_IDX4 0x0278 |
| #define TX_DTX_IDX4 0x027c |
| |
| /* |
| * MGMT register offsets |
| */ |
| #define TX_BASE_PTR5 0x0280 |
| #define TX_MAX_CNT5 0x0284 |
| #define TX_CTX_IDX5 0x0288 |
| #define TX_DTX_IDX5 0x028c |
| |
| /* |
| * RX register offsets |
| */ |
| #define RX_BASE_PTR 0x0290 |
| #define RX_MAX_CNT 0x0294 |
| #define RX_CRX_IDX 0x0298 |
| #define RX_DRX_IDX 0x029c |
| |
| /* |
| * USB_DMA_CFG |
| * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns. |
| * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes. |
| * PHY_CLEAR: phy watch dog enable. |
| * TX_CLEAR: Clear USB DMA TX path. |
| * TXOP_HALT: Halt TXOP count down when TX buffer is full. |
| * RX_BULK_AGG_EN: Enable Rx Bulk Aggregation. |
| * RX_BULK_EN: Enable USB DMA Rx. |
| * TX_BULK_EN: Enable USB DMA Tx. |
| * EP_OUT_VALID: OUT endpoint data valid. |
| * RX_BUSY: USB DMA RX FSM busy. |
| * TX_BUSY: USB DMA TX FSM busy. |
| */ |
| #define USB_DMA_CFG 0x02a0 |
| #define USB_DMA_CFG_RX_BULK_AGG_TIMEOUT FIELD32(0x000000ff) |
| #define USB_DMA_CFG_RX_BULK_AGG_LIMIT FIELD32(0x0000ff00) |
| #define USB_DMA_CFG_PHY_CLEAR FIELD32(0x00010000) |
| #define USB_DMA_CFG_TX_CLEAR FIELD32(0x00080000) |
| #define USB_DMA_CFG_TXOP_HALT FIELD32(0x00100000) |
| #define USB_DMA_CFG_RX_BULK_AGG_EN FIELD32(0x00200000) |
| #define USB_DMA_CFG_RX_BULK_EN FIELD32(0x00400000) |
| #define USB_DMA_CFG_TX_BULK_EN FIELD32(0x00800000) |
| #define USB_DMA_CFG_EP_OUT_VALID FIELD32(0x3f000000) |
| #define USB_DMA_CFG_RX_BUSY FIELD32(0x40000000) |
| #define USB_DMA_CFG_TX_BUSY FIELD32(0x80000000) |
| |
| /* |
| * US_CYC_CNT |
| * BT_MODE_EN: Bluetooth mode enable |
| * CLOCK CYCLE: Clock cycle count in 1us. |
| * PCI:0x21, PCIE:0x7d, USB:0x1e |
| */ |
| #define US_CYC_CNT 0x02a4 |
| #define US_CYC_CNT_BT_MODE_EN FIELD32(0x00000100) |
| #define US_CYC_CNT_CLOCK_CYCLE FIELD32(0x000000ff) |
| |
| /* |
| * PBF_SYS_CTRL |
| * HOST_RAM_WRITE: enable Host program ram write selection |
| */ |
| #define PBF_SYS_CTRL 0x0400 |
| #define PBF_SYS_CTRL_READY FIELD32(0x00000080) |
| #define PBF_SYS_CTRL_HOST_RAM_WRITE FIELD32(0x00010000) |
| |
| /* |
| * HOST-MCU shared memory |
| */ |
| #define HOST_CMD_CSR 0x0404 |
| #define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x000000ff) |
| |
| /* |
| * PBF registers |
| * Most are for debug. Driver doesn't touch PBF register. |
| */ |
| #define PBF_CFG 0x0408 |
| #define PBF_MAX_PCNT 0x040c |
| #define PBF_CTRL 0x0410 |
| #define PBF_INT_STA 0x0414 |
| #define PBF_INT_ENA 0x0418 |
| |
| /* |
| * BCN_OFFSET0: |
| */ |
| #define BCN_OFFSET0 0x042c |
| #define BCN_OFFSET0_BCN0 FIELD32(0x000000ff) |
| #define BCN_OFFSET0_BCN1 FIELD32(0x0000ff00) |
| #define BCN_OFFSET0_BCN2 FIELD32(0x00ff0000) |
| #define BCN_OFFSET0_BCN3 FIELD32(0xff000000) |
| |
| /* |
| * BCN_OFFSET1: |
| */ |
| #define BCN_OFFSET1 0x0430 |
| #define BCN_OFFSET1_BCN4 FIELD32(0x000000ff) |
| #define BCN_OFFSET1_BCN5 FIELD32(0x0000ff00) |
| #define BCN_OFFSET1_BCN6 FIELD32(0x00ff0000) |
| #define BCN_OFFSET1_BCN7 FIELD32(0xff000000) |
| |
| /* |
| * TXRXQ_PCNT: PBF register |
| * PCNT_TX0Q: Page count for TX hardware queue 0 |
| * PCNT_TX1Q: Page count for TX hardware queue 1 |
| * PCNT_TX2Q: Page count for TX hardware queue 2 |
| * PCNT_RX0Q: Page count for RX hardware queue |
| */ |
| #define TXRXQ_PCNT 0x0438 |
| #define TXRXQ_PCNT_TX0Q FIELD32(0x000000ff) |
| #define TXRXQ_PCNT_TX1Q FIELD32(0x0000ff00) |
| #define TXRXQ_PCNT_TX2Q FIELD32(0x00ff0000) |
| #define TXRXQ_PCNT_RX0Q FIELD32(0xff000000) |
| |
| /* |
| * PBF register |
| * Debug. Driver doesn't touch PBF register. |
| */ |
| #define PBF_DBG 0x043c |
| |
| /* |
| * RF registers |
| */ |
| #define RF_CSR_CFG 0x0500 |
| #define RF_CSR_CFG_DATA FIELD32(0x000000ff) |
| #define RF_CSR_CFG_REGNUM FIELD32(0x00003f00) |
| #define RF_CSR_CFG_WRITE FIELD32(0x00010000) |
| #define RF_CSR_CFG_BUSY FIELD32(0x00020000) |
| |
| /* |
| * EFUSE_CSR: RT30x0 EEPROM |
| */ |
| #define EFUSE_CTRL 0x0580 |
| #define EFUSE_CTRL_ADDRESS_IN FIELD32(0x03fe0000) |
| #define EFUSE_CTRL_MODE FIELD32(0x000000c0) |
| #define EFUSE_CTRL_KICK FIELD32(0x40000000) |
| #define EFUSE_CTRL_PRESENT FIELD32(0x80000000) |
| |
| /* |
| * EFUSE_DATA0 |
| */ |
| #define EFUSE_DATA0 0x0590 |
| |
| /* |
| * EFUSE_DATA1 |
| */ |
| #define EFUSE_DATA1 0x0594 |
| |
| /* |
| * EFUSE_DATA2 |
| */ |
| #define EFUSE_DATA2 0x0598 |
| |
| /* |
| * EFUSE_DATA3 |
| */ |
| #define EFUSE_DATA3 0x059c |
| |
| /* |
| * LDO_CFG0 |
| */ |
| #define LDO_CFG0 0x05d4 |
| #define LDO_CFG0_DELAY3 FIELD32(0x000000ff) |
| #define LDO_CFG0_DELAY2 FIELD32(0x0000ff00) |
| #define LDO_CFG0_DELAY1 FIELD32(0x00ff0000) |
| #define LDO_CFG0_BGSEL FIELD32(0x03000000) |
| #define LDO_CFG0_LDO_CORE_VLEVEL FIELD32(0x1c000000) |
| #define LD0_CFG0_LDO25_LEVEL FIELD32(0x60000000) |
| #define LDO_CFG0_LDO25_LARGEA FIELD32(0x80000000) |
| |
| /* |
| * GPIO_SWITCH |
| */ |
| #define GPIO_SWITCH 0x05dc |
| #define GPIO_SWITCH_0 FIELD32(0x00000001) |
| #define GPIO_SWITCH_1 FIELD32(0x00000002) |
| #define GPIO_SWITCH_2 FIELD32(0x00000004) |
| #define GPIO_SWITCH_3 FIELD32(0x00000008) |
| #define GPIO_SWITCH_4 FIELD32(0x00000010) |
| #define GPIO_SWITCH_5 FIELD32(0x00000020) |
| #define GPIO_SWITCH_6 FIELD32(0x00000040) |
| #define GPIO_SWITCH_7 FIELD32(0x00000080) |
| |
| /* |
| * MAC Control/Status Registers(CSR). |
| * Some values are set in TU, whereas 1 TU == 1024 us. |
| */ |
| |
| /* |
| * MAC_CSR0: ASIC revision number. |
| * ASIC_REV: 0 |
| * ASIC_VER: 2860 or 2870 |
| */ |
| #define MAC_CSR0 0x1000 |
| #define MAC_CSR0_REVISION FIELD32(0x0000ffff) |
| #define MAC_CSR0_CHIPSET FIELD32(0xffff0000) |
| |
| /* |
| * MAC_SYS_CTRL: |
| */ |
| #define MAC_SYS_CTRL 0x1004 |
| #define MAC_SYS_CTRL_RESET_CSR FIELD32(0x00000001) |
| #define MAC_SYS_CTRL_RESET_BBP FIELD32(0x00000002) |
| #define MAC_SYS_CTRL_ENABLE_TX FIELD32(0x00000004) |
| #define MAC_SYS_CTRL_ENABLE_RX FIELD32(0x00000008) |
| #define MAC_SYS_CTRL_CONTINUOUS_TX FIELD32(0x00000010) |
| #define MAC_SYS_CTRL_LOOPBACK FIELD32(0x00000020) |
| #define MAC_SYS_CTRL_WLAN_HALT FIELD32(0x00000040) |
| #define MAC_SYS_CTRL_RX_TIMESTAMP FIELD32(0x00000080) |
| |
| /* |
| * MAC_ADDR_DW0: STA MAC register 0 |
| */ |
| #define MAC_ADDR_DW0 0x1008 |
| #define MAC_ADDR_DW0_BYTE0 FIELD32(0x000000ff) |
| #define MAC_ADDR_DW0_BYTE1 FIELD32(0x0000ff00) |
| #define MAC_ADDR_DW0_BYTE2 FIELD32(0x00ff0000) |
| #define MAC_ADDR_DW0_BYTE3 FIELD32(0xff000000) |
| |
| /* |
| * MAC_ADDR_DW1: STA MAC register 1 |
| * UNICAST_TO_ME_MASK: |
| * Used to mask off bits from byte 5 of the MAC address |
| * to determine the UNICAST_TO_ME bit for RX frames. |
| * The full mask is complemented by BSS_ID_MASK: |
| * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK |
| */ |
| #define MAC_ADDR_DW1 0x100c |
| #define MAC_ADDR_DW1_BYTE4 FIELD32(0x000000ff) |
| #define MAC_ADDR_DW1_BYTE5 FIELD32(0x0000ff00) |
| #define MAC_ADDR_DW1_UNICAST_TO_ME_MASK FIELD32(0x00ff0000) |
| |
| /* |
| * MAC_BSSID_DW0: BSSID register 0 |
| */ |
| #define MAC_BSSID_DW0 0x1010 |
| #define MAC_BSSID_DW0_BYTE0 FIELD32(0x000000ff) |
| #define MAC_BSSID_DW0_BYTE1 FIELD32(0x0000ff00) |
| #define MAC_BSSID_DW0_BYTE2 FIELD32(0x00ff0000) |
| #define MAC_BSSID_DW0_BYTE3 FIELD32(0xff000000) |
| |
| /* |
| * MAC_BSSID_DW1: BSSID register 1 |
| * BSS_ID_MASK: |
| * 0: 1-BSSID mode (BSS index = 0) |
| * 1: 2-BSSID mode (BSS index: Byte5, bit 0) |
| * 2: 4-BSSID mode (BSS index: byte5, bit 0 - 1) |
| * 3: 8-BSSID mode (BSS index: byte5, bit 0 - 2) |
| * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the |
| * BSSID. This will make sure that those bits will be ignored |
| * when determining the MY_BSS of RX frames. |
| */ |
| #define MAC_BSSID_DW1 0x1014 |
| #define MAC_BSSID_DW1_BYTE4 FIELD32(0x000000ff) |
| #define MAC_BSSID_DW1_BYTE5 FIELD32(0x0000ff00) |
| #define MAC_BSSID_DW1_BSS_ID_MASK FIELD32(0x00030000) |
| #define MAC_BSSID_DW1_BSS_BCN_NUM FIELD32(0x001c0000) |
| |
| /* |
| * MAX_LEN_CFG: Maximum frame length register. |
| * MAX_MPDU: rt2860b max 16k bytes |
| * MAX_PSDU: Maximum PSDU length |
| * (power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16 |
| */ |
| #define MAX_LEN_CFG 0x1018 |
| #define MAX_LEN_CFG_MAX_MPDU FIELD32(0x00000fff) |
| #define MAX_LEN_CFG_MAX_PSDU FIELD32(0x00003000) |
| #define MAX_LEN_CFG_MIN_PSDU FIELD32(0x0000c000) |
| #define MAX_LEN_CFG_MIN_MPDU FIELD32(0x000f0000) |
| |
| /* |
| * BBP_CSR_CFG: BBP serial control register |
| * VALUE: Register value to program into BBP |
| * REG_NUM: Selected BBP register |
| * READ_CONTROL: 0 write BBP, 1 read BBP |
| * BUSY: ASIC is busy executing BBP commands |
| * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks |
| * BBP_RW_MODE: 0 serial, 1 parallel |
| */ |
| #define BBP_CSR_CFG 0x101c |
| #define BBP_CSR_CFG_VALUE FIELD32(0x000000ff) |
| #define BBP_CSR_CFG_REGNUM FIELD32(0x0000ff00) |
| #define BBP_CSR_CFG_READ_CONTROL FIELD32(0x00010000) |
| #define BBP_CSR_CFG_BUSY FIELD32(0x00020000) |
| #define BBP_CSR_CFG_BBP_PAR_DUR FIELD32(0x00040000) |
| #define BBP_CSR_CFG_BBP_RW_MODE FIELD32(0x00080000) |
| |
| /* |
| * RF_CSR_CFG0: RF control register |
| * REGID_AND_VALUE: Register value to program into RF |
| * BITWIDTH: Selected RF register |
| * STANDBYMODE: 0 high when standby, 1 low when standby |
| * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate |
| * BUSY: ASIC is busy executing RF commands |
| */ |
| #define RF_CSR_CFG0 0x1020 |
| #define RF_CSR_CFG0_REGID_AND_VALUE FIELD32(0x00ffffff) |
| #define RF_CSR_CFG0_BITWIDTH FIELD32(0x1f000000) |
| #define RF_CSR_CFG0_REG_VALUE_BW FIELD32(0x1fffffff) |
| #define RF_CSR_CFG0_STANDBYMODE FIELD32(0x20000000) |
| #define RF_CSR_CFG0_SEL FIELD32(0x40000000) |
| #define RF_CSR_CFG0_BUSY FIELD32(0x80000000) |
| |
| /* |
| * RF_CSR_CFG1: RF control register |
| * REGID_AND_VALUE: Register value to program into RF |
| * RFGAP: Gap between BB_CONTROL_RF and RF_LE |
| * 0: 3 system clock cycle (37.5usec) |
| * 1: 5 system clock cycle (62.5usec) |
| */ |
| #define RF_CSR_CFG1 0x1024 |
| #define RF_CSR_CFG1_REGID_AND_VALUE FIELD32(0x00ffffff) |
| #define RF_CSR_CFG1_RFGAP FIELD32(0x1f000000) |
| |
| /* |
| * RF_CSR_CFG2: RF control register |
| * VALUE: Register value to program into RF |
| */ |
| #define RF_CSR_CFG2 0x1028 |
| #define RF_CSR_CFG2_VALUE FIELD32(0x00ffffff) |
| |
| /* |
| * LED_CFG: LED control |
| * ON_PERIOD: LED active time (ms) during TX (only used for LED mode 1) |
| * OFF_PERIOD: LED inactive time (ms) during TX (only used for LED mode 1) |
| * SLOW_BLINK_PERIOD: LED blink interval in seconds (only used for LED mode 2) |
| * color LED's: |
| * 0: off |
| * 1: blinking upon TX2 |
| * 2: periodic slow blinking |
| * 3: always on |
| * LED polarity: |
| * 0: active low |
| * 1: active high |
| */ |
| #define LED_CFG 0x102c |
| #define LED_CFG_ON_PERIOD FIELD32(0x000000ff) |
| #define LED_CFG_OFF_PERIOD FIELD32(0x0000ff00) |
| #define LED_CFG_SLOW_BLINK_PERIOD FIELD32(0x003f0000) |
| #define LED_CFG_R_LED_MODE FIELD32(0x03000000) |
| #define LED_CFG_G_LED_MODE FIELD32(0x0c000000) |
| #define LED_CFG_Y_LED_MODE FIELD32(0x30000000) |
| #define LED_CFG_LED_POLAR FIELD32(0x40000000) |
| |
| /* |
| * AMPDU_BA_WINSIZE: Force BlockAck window size |
| * FORCE_WINSIZE_ENABLE: |
| * 0: Disable forcing of BlockAck window size |
| * 1: Enable forcing of BlockAck window size, overwrites values BlockAck |
| * window size values in the TXWI |
| * FORCE_WINSIZE: BlockAck window size |
| */ |
| #define AMPDU_BA_WINSIZE 0x1040 |
| #define AMPDU_BA_WINSIZE_FORCE_WINSIZE_ENABLE FIELD32(0x00000020) |
| #define AMPDU_BA_WINSIZE_FORCE_WINSIZE FIELD32(0x0000001f) |
| |
| /* |
| * XIFS_TIME_CFG: MAC timing |
| * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX |
| * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX |
| * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX |
| * when MAC doesn't reference BBP signal BBRXEND |
| * EIFS: unit 1us |
| * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer |
| * |
| */ |
| #define XIFS_TIME_CFG 0x1100 |
| #define XIFS_TIME_CFG_CCKM_SIFS_TIME FIELD32(0x000000ff) |
| #define XIFS_TIME_CFG_OFDM_SIFS_TIME FIELD32(0x0000ff00) |
| #define XIFS_TIME_CFG_OFDM_XIFS_TIME FIELD32(0x000f0000) |
| #define XIFS_TIME_CFG_EIFS FIELD32(0x1ff00000) |
| #define XIFS_TIME_CFG_BB_RXEND_ENABLE FIELD32(0x20000000) |
| |
| /* |
| * BKOFF_SLOT_CFG: |
| */ |
| #define BKOFF_SLOT_CFG 0x1104 |
| #define BKOFF_SLOT_CFG_SLOT_TIME FIELD32(0x000000ff) |
| #define BKOFF_SLOT_CFG_CC_DELAY_TIME FIELD32(0x0000ff00) |
| |
| /* |
| * NAV_TIME_CFG: |
| */ |
| #define NAV_TIME_CFG 0x1108 |
| #define NAV_TIME_CFG_SIFS FIELD32(0x000000ff) |
| #define NAV_TIME_CFG_SLOT_TIME FIELD32(0x0000ff00) |
| #define NAV_TIME_CFG_EIFS FIELD32(0x01ff0000) |
| #define NAV_TIME_ZERO_SIFS FIELD32(0x02000000) |
| |
| /* |
| * CH_TIME_CFG: count as channel busy |
| * EIFS_BUSY: Count EIFS as channel busy |
| * NAV_BUSY: Count NAS as channel busy |
| * RX_BUSY: Count RX as channel busy |
| * TX_BUSY: Count TX as channel busy |
| * TMR_EN: Enable channel statistics timer |
| */ |
| #define CH_TIME_CFG 0x110c |
| #define CH_TIME_CFG_EIFS_BUSY FIELD32(0x00000010) |
| #define CH_TIME_CFG_NAV_BUSY FIELD32(0x00000008) |
| #define CH_TIME_CFG_RX_BUSY FIELD32(0x00000004) |
| #define CH_TIME_CFG_TX_BUSY FIELD32(0x00000002) |
| #define CH_TIME_CFG_TMR_EN FIELD32(0x00000001) |
| |
| /* |
| * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us |
| */ |
| #define PBF_LIFE_TIMER 0x1110 |
| |
| /* |
| * BCN_TIME_CFG: |
| * BEACON_INTERVAL: in unit of 1/16 TU |
| * TSF_TICKING: Enable TSF auto counting |
| * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode |
| * BEACON_GEN: Enable beacon generator |
| */ |
| #define BCN_TIME_CFG 0x1114 |
| #define BCN_TIME_CFG_BEACON_INTERVAL FIELD32(0x0000ffff) |
| #define BCN_TIME_CFG_TSF_TICKING FIELD32(0x00010000) |
| #define BCN_TIME_CFG_TSF_SYNC FIELD32(0x00060000) |
| #define BCN_TIME_CFG_TBTT_ENABLE FIELD32(0x00080000) |
| #define BCN_TIME_CFG_BEACON_GEN FIELD32(0x00100000) |
| #define BCN_TIME_CFG_TX_TIME_COMPENSATE FIELD32(0xf0000000) |
| |
| /* |
| * TBTT_SYNC_CFG: |
| * BCN_AIFSN: Beacon AIFSN after TBTT interrupt in slots |
| * BCN_CWMIN: Beacon CWMin after TBTT interrupt in slots |
| */ |
| #define TBTT_SYNC_CFG 0x1118 |
| #define TBTT_SYNC_CFG_TBTT_ADJUST FIELD32(0x000000ff) |
| #define TBTT_SYNC_CFG_BCN_EXP_WIN FIELD32(0x0000ff00) |
| #define TBTT_SYNC_CFG_BCN_AIFSN FIELD32(0x000f0000) |
| #define TBTT_SYNC_CFG_BCN_CWMIN FIELD32(0x00f00000) |
| |
| /* |
| * TSF_TIMER_DW0: Local lsb TSF timer, read-only |
| */ |
| #define TSF_TIMER_DW0 0x111c |
| #define TSF_TIMER_DW0_LOW_WORD FIELD32(0xffffffff) |
| |
| /* |
| * TSF_TIMER_DW1: Local msb TSF timer, read-only |
| */ |
| #define TSF_TIMER_DW1 0x1120 |
| #define TSF_TIMER_DW1_HIGH_WORD FIELD32(0xffffffff) |
| |
| /* |
| * TBTT_TIMER: TImer remains till next TBTT, read-only |
| */ |
| #define TBTT_TIMER 0x1124 |
| |
| /* |
| * INT_TIMER_CFG: timer configuration |
| * PRE_TBTT_TIMER: leadtime to tbtt for pretbtt interrupt in units of 1/16 TU |
| * GP_TIMER: period of general purpose timer in units of 1/16 TU |
| */ |
| #define INT_TIMER_CFG 0x1128 |
| #define INT_TIMER_CFG_PRE_TBTT_TIMER FIELD32(0x0000ffff) |
| #define INT_TIMER_CFG_GP_TIMER FIELD32(0xffff0000) |
| |
| /* |
| * INT_TIMER_EN: GP-timer and pre-tbtt Int enable |
| */ |
| #define INT_TIMER_EN 0x112c |
| #define INT_TIMER_EN_PRE_TBTT_TIMER FIELD32(0x00000001) |
| #define INT_TIMER_EN_GP_TIMER FIELD32(0x00000002) |
| |
| /* |
| * CH_IDLE_STA: channel idle time (in us) |
| */ |
| #define CH_IDLE_STA 0x1130 |
| |
| /* |
| * CH_BUSY_STA: channel busy time on primary channel (in us) |
| */ |
| #define CH_BUSY_STA 0x1134 |
| |
| /* |
| * CH_BUSY_STA_SEC: channel busy time on secondary channel in HT40 mode (in us) |
| */ |
| #define CH_BUSY_STA_SEC 0x1138 |
| |
| /* |
| * MAC_STATUS_CFG: |
| * BBP_RF_BUSY: When set to 0, BBP and RF are stable. |
| * if 1 or higher one of the 2 registers is busy. |
| */ |
| #define MAC_STATUS_CFG 0x1200 |
| #define MAC_STATUS_CFG_BBP_RF_BUSY FIELD32(0x00000003) |
| |
| /* |
| * PWR_PIN_CFG: |
| */ |
| #define PWR_PIN_CFG 0x1204 |
| |
| /* |
| * AUTOWAKEUP_CFG: Manual power control / status register |
| * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set |
| * AUTOWAKE: 0:sleep, 1:awake |
| */ |
| #define AUTOWAKEUP_CFG 0x1208 |
| #define AUTOWAKEUP_CFG_AUTO_LEAD_TIME FIELD32(0x000000ff) |
| #define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE FIELD32(0x00007f00) |
| #define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) |
| |
| /* |
| * EDCA_AC0_CFG: |
| */ |
| #define EDCA_AC0_CFG 0x1300 |
| #define EDCA_AC0_CFG_TX_OP FIELD32(0x000000ff) |
| #define EDCA_AC0_CFG_AIFSN FIELD32(0x00000f00) |
| #define EDCA_AC0_CFG_CWMIN FIELD32(0x0000f000) |
| #define EDCA_AC0_CFG_CWMAX FIELD32(0x000f0000) |
| |
| /* |
| * EDCA_AC1_CFG: |
| */ |
| #define EDCA_AC1_CFG 0x1304 |
| #define EDCA_AC1_CFG_TX_OP FIELD32(0x000000ff) |
| #define EDCA_AC1_CFG_AIFSN FIELD32(0x00000f00) |
| #define EDCA_AC1_CFG_CWMIN FIELD32(0x0000f000) |
| #define EDCA_AC1_CFG_CWMAX FIELD32(0x000f0000) |
| |
| /* |
| * EDCA_AC2_CFG: |
| */ |
| #define EDCA_AC2_CFG 0x1308 |
| #define EDCA_AC2_CFG_TX_OP FIELD32(0x000000ff) |
| #define EDCA_AC2_CFG_AIFSN FIELD32(0x00000f00) |
| #define EDCA_AC2_CFG_CWMIN FIELD32(0x0000f000) |
| #define EDCA_AC2_CFG_CWMAX FIELD32(0x000f0000) |
| |
| /* |
| * EDCA_AC3_CFG: |
| */ |
| #define EDCA_AC3_CFG 0x130c |
| #define EDCA_AC3_CFG_TX_OP FIELD32(0x000000ff) |
| #define EDCA_AC3_CFG_AIFSN FIELD32(0x00000f00) |
| #define EDCA_AC3_CFG_CWMIN FIELD32(0x0000f000) |
| #define EDCA_AC3_CFG_CWMAX FIELD32(0x000f0000) |
| |
| /* |
| * EDCA_TID_AC_MAP: |
| */ |
| #define EDCA_TID_AC_MAP 0x1310 |
| |
| /* |
| * TX_PWR_CFG: |
| */ |
| #define TX_PWR_CFG_RATE0 FIELD32(0x0000000f) |
| #define TX_PWR_CFG_RATE1 FIELD32(0x000000f0) |
| #define TX_PWR_CFG_RATE2 FIELD32(0x00000f00) |
| #define TX_PWR_CFG_RATE3 FIELD32(0x0000f000) |
| #define TX_PWR_CFG_RATE4 FIELD32(0x000f0000) |
| #define TX_PWR_CFG_RATE5 FIELD32(0x00f00000) |
| #define TX_PWR_CFG_RATE6 FIELD32(0x0f000000) |
| #define TX_PWR_CFG_RATE7 FIELD32(0xf0000000) |
| |
| /* |
| * TX_PWR_CFG_0: |
| */ |
| #define TX_PWR_CFG_0 0x1314 |
| #define TX_PWR_CFG_0_1MBS FIELD32(0x0000000f) |
| #define TX_PWR_CFG_0_2MBS FIELD32(0x000000f0) |
| #define TX_PWR_CFG_0_55MBS FIELD32(0x00000f00) |
| #define TX_PWR_CFG_0_11MBS FIELD32(0x0000f000) |
| #define TX_PWR_CFG_0_6MBS FIELD32(0x000f0000) |
| #define TX_PWR_CFG_0_9MBS FIELD32(0x00f00000) |
| #define TX_PWR_CFG_0_12MBS FIELD32(0x0f000000) |
| #define TX_PWR_CFG_0_18MBS FIELD32(0xf0000000) |
| |
| /* |
| * TX_PWR_CFG_1: |
| */ |
| #define TX_PWR_CFG_1 0x1318 |
| #define TX_PWR_CFG_1_24MBS FIELD32(0x0000000f) |
| #define TX_PWR_CFG_1_36MBS FIELD32(0x000000f0) |
| #define TX_PWR_CFG_1_48MBS FIELD32(0x00000f00) |
| #define TX_PWR_CFG_1_54MBS FIELD32(0x0000f000) |
| #define TX_PWR_CFG_1_MCS0 FIELD32(0x000f0000) |
| #define TX_PWR_CFG_1_MCS1 FIELD32(0x00f00000) |
| #define TX_PWR_CFG_1_MCS2 FIELD32(0x0f000000) |
| #define TX_PWR_CFG_1_MCS3 FIELD32(0xf0000000) |
| |
| /* |
| * TX_PWR_CFG_2: |
| */ |
| #define TX_PWR_CFG_2 0x131c |
| #define TX_PWR_CFG_2_MCS4 FIELD32(0x0000000f) |
| #define TX_PWR_CFG_2_MCS5 FIELD32(0x000000f0) |
| #define TX_PWR_CFG_2_MCS6 FIELD32(0x00000f00) |
| #define TX_PWR_CFG_2_MCS7 FIELD32(0x0000f000) |
| #define TX_PWR_CFG_2_MCS8 FIELD32(0x000f0000) |
| #define TX_PWR_CFG_2_MCS9 FIELD32(0x00f00000) |
| #define TX_PWR_CFG_2_MCS10 FIELD32(0x0f000000) |
| #define TX_PWR_CFG_2_MCS11 FIELD32(0xf0000000) |
| |
| /* |
| * TX_PWR_CFG_3: |
| */ |
| #define TX_PWR_CFG_3 0x1320 |
| #define TX_PWR_CFG_3_MCS12 FIELD32(0x0000000f) |
| #define TX_PWR_CFG_3_MCS13 FIELD32(0x000000f0) |
| #define TX_PWR_CFG_3_MCS14 FIELD32(0x00000f00) |
| #define TX_PWR_CFG_3_MCS15 FIELD32(0x0000f000) |
| #define TX_PWR_CFG_3_UKNOWN1 FIELD32(0x000f0000) |
| #define TX_PWR_CFG_3_UKNOWN2 FIELD32(0x00f00000) |
| #define TX_PWR_CFG_3_UKNOWN3 FIELD32(0x0f000000) |
| #define TX_PWR_CFG_3_UKNOWN4 FIELD32(0xf0000000) |
| |
| /* |
| * TX_PWR_CFG_4: |
| */ |
| #define TX_PWR_CFG_4 0x1324 |
| #define TX_PWR_CFG_4_UKNOWN5 FIELD32(0x0000000f) |
| #define TX_PWR_CFG_4_UKNOWN6 FIELD32(0x000000f0) |
| #define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00) |
| #define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000) |
| |
| /* |
| * TX_PIN_CFG: |
| */ |
| #define TX_PIN_CFG 0x1328 |
| #define TX_PIN_CFG_PA_PE_A0_EN FIELD32(0x00000001) |
| #define TX_PIN_CFG_PA_PE_G0_EN FIELD32(0x00000002) |
| #define TX_PIN_CFG_PA_PE_A1_EN FIELD32(0x00000004) |
| #define TX_PIN_CFG_PA_PE_G1_EN FIELD32(0x00000008) |
| #define TX_PIN_CFG_PA_PE_A0_POL FIELD32(0x00000010) |
| #define TX_PIN_CFG_PA_PE_G0_POL FIELD32(0x00000020) |
| #define TX_PIN_CFG_PA_PE_A1_POL FIELD32(0x00000040) |
| #define TX_PIN_CFG_PA_PE_G1_POL FIELD32(0x00000080) |
| #define TX_PIN_CFG_LNA_PE_A0_EN FIELD32(0x00000100) |
| #define TX_PIN_CFG_LNA_PE_G0_EN FIELD32(0x00000200) |
| #define TX_PIN_CFG_LNA_PE_A1_EN FIELD32(0x00000400) |
| #define TX_PIN_CFG_LNA_PE_G1_EN FIELD32(0x00000800) |
| #define TX_PIN_CFG_LNA_PE_A0_POL FIELD32(0x00001000) |
| #define TX_PIN_CFG_LNA_PE_G0_POL FIELD32(0x00002000) |
| #define TX_PIN_CFG_LNA_PE_A1_POL FIELD32(0x00004000) |
| #define TX_PIN_CFG_LNA_PE_G1_POL FIELD32(0x00008000) |
| #define TX_PIN_CFG_RFTR_EN FIELD32(0x00010000) |
| #define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) |
| #define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) |
| #define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) |
| |
| /* |
| * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz |
| */ |
| #define TX_BAND_CFG 0x132c |
| #define TX_BAND_CFG_HT40_MINUS FIELD32(0x00000001) |
| #define TX_BAND_CFG_A FIELD32(0x00000002) |
| #define TX_BAND_CFG_BG FIELD32(0x00000004) |
| |
| /* |
| * TX_SW_CFG0: |
| */ |
| #define TX_SW_CFG0 0x1330 |
| |
| /* |
| * TX_SW_CFG1: |
| */ |
| #define TX_SW_CFG1 0x1334 |
| |
| /* |
| * TX_SW_CFG2: |
| */ |
| #define TX_SW_CFG2 0x1338 |
| |
| /* |
| * TXOP_THRES_CFG: |
| */ |
| #define TXOP_THRES_CFG 0x133c |
| |
| /* |
| * TXOP_CTRL_CFG: |
| * TIMEOUT_TRUN_EN: Enable/Disable TXOP timeout truncation |
| * AC_TRUN_EN: Enable/Disable truncation for AC change |
| * TXRATEGRP_TRUN_EN: Enable/Disable truncation for TX rate group change |
| * USER_MODE_TRUN_EN: Enable/Disable truncation for user TXOP mode |
| * MIMO_PS_TRUN_EN: Enable/Disable truncation for MIMO PS RTS/CTS |
| * RESERVED_TRUN_EN: Reserved |
| * LSIG_TXOP_EN: Enable/Disable L-SIG TXOP protection |
| * EXT_CCA_EN: Enable/Disable extension channel CCA reference (Defer 40Mhz |
| * transmissions if extension CCA is clear). |
| * EXT_CCA_DLY: Extension CCA signal delay time (unit: us) |
| * EXT_CWMIN: CwMin for extension channel backoff |
| * 0: Disabled |
| * |
| */ |
| #define TXOP_CTRL_CFG 0x1340 |
| #define TXOP_CTRL_CFG_TIMEOUT_TRUN_EN FIELD32(0x00000001) |
| #define TXOP_CTRL_CFG_AC_TRUN_EN FIELD32(0x00000002) |
| #define TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN FIELD32(0x00000004) |
| #define TXOP_CTRL_CFG_USER_MODE_TRUN_EN FIELD32(0x00000008) |
| #define TXOP_CTRL_CFG_MIMO_PS_TRUN_EN FIELD32(0x00000010) |
| #define TXOP_CTRL_CFG_RESERVED_TRUN_EN FIELD32(0x00000020) |
| #define TXOP_CTRL_CFG_LSIG_TXOP_EN FIELD32(0x00000040) |
| #define TXOP_CTRL_CFG_EXT_CCA_EN FIELD32(0x00000080) |
| #define TXOP_CTRL_CFG_EXT_CCA_DLY FIELD32(0x0000ff00) |
| #define TXOP_CTRL_CFG_EXT_CWMIN FIELD32(0x000f0000) |
| |
| /* |
| * TX_RTS_CFG: |
| * RTS_THRES: unit:byte |
| * RTS_FBK_EN: enable rts rate fallback |
| */ |
| #define TX_RTS_CFG 0x1344 |
| #define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT FIELD32(0x000000ff) |
| #define TX_RTS_CFG_RTS_THRES FIELD32(0x00ffff00) |
| #define TX_RTS_CFG_RTS_FBK_EN FIELD32(0x01000000) |
| |
| /* |
| * TX_TIMEOUT_CFG: |
| * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us |
| * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure |
| * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation. |
| * it is recommended that: |
| * (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT) |
| */ |
| #define TX_TIMEOUT_CFG 0x1348 |
| #define TX_TIMEOUT_CFG_MPDU_LIFETIME FIELD32(0x000000f0) |
| #define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT FIELD32(0x0000ff00) |
| #define TX_TIMEOUT_CFG_TX_OP_TIMEOUT FIELD32(0x00ff0000) |
| |
| /* |
| * TX_RTY_CFG: |
| * SHORT_RTY_LIMIT: short retry limit |
| * LONG_RTY_LIMIT: long retry limit |
| * LONG_RTY_THRE: Long retry threshoold |
| * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode |
| * 0:expired by retry limit, 1: expired by mpdu life timer |
| * AGG_RTY_MODE: Aggregate MPDU retry mode |
| * 0:expired by retry limit, 1: expired by mpdu life timer |
| * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable |
| */ |
| #define TX_RTY_CFG 0x134c |
| #define TX_RTY_CFG_SHORT_RTY_LIMIT FIELD32(0x000000ff) |
| #define TX_RTY_CFG_LONG_RTY_LIMIT FIELD32(0x0000ff00) |
| #define TX_RTY_CFG_LONG_RTY_THRE FIELD32(0x0fff0000) |
| #define TX_RTY_CFG_NON_AGG_RTY_MODE FIELD32(0x10000000) |
| #define TX_RTY_CFG_AGG_RTY_MODE FIELD32(0x20000000) |
| #define TX_RTY_CFG_TX_AUTO_FB_ENABLE FIELD32(0x40000000) |
| |
| /* |
| * TX_LINK_CFG: |
| * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us |
| * MFB_ENABLE: TX apply remote MFB 1:enable |
| * REMOTE_UMFS_ENABLE: remote unsolicit MFB enable |
| * 0: not apply remote remote unsolicit (MFS=7) |
| * TX_MRQ_EN: MCS request TX enable |
| * TX_RDG_EN: RDG TX enable |
| * TX_CF_ACK_EN: Piggyback CF-ACK enable |
| * REMOTE_MFB: remote MCS feedback |
| * REMOTE_MFS: remote MCS feedback sequence number |
| */ |
| #define TX_LINK_CFG 0x1350 |
| #define TX_LINK_CFG_REMOTE_MFB_LIFETIME FIELD32(0x000000ff) |
| #define TX_LINK_CFG_MFB_ENABLE FIELD32(0x00000100) |
| #define TX_LINK_CFG_REMOTE_UMFS_ENABLE FIELD32(0x00000200) |
| #define TX_LINK_CFG_TX_MRQ_EN FIELD32(0x00000400) |
| #define TX_LINK_CFG_TX_RDG_EN FIELD32(0x00000800) |
| #define TX_LINK_CFG_TX_CF_ACK_EN FIELD32(0x00001000) |
| #define TX_LINK_CFG_REMOTE_MFB FIELD32(0x00ff0000) |
| #define TX_LINK_CFG_REMOTE_MFS FIELD32(0xff000000) |
| |
| /* |
| * HT_FBK_CFG0: |
| */ |
| #define HT_FBK_CFG0 0x1354 |
| #define HT_FBK_CFG0_HTMCS0FBK FIELD32(0x0000000f) |
| #define HT_FBK_CFG0_HTMCS1FBK FIELD32(0x000000f0) |
| #define HT_FBK_CFG0_HTMCS2FBK FIELD32(0x00000f00) |
| #define HT_FBK_CFG0_HTMCS3FBK FIELD32(0x0000f000) |
| #define HT_FBK_CFG0_HTMCS4FBK FIELD32(0x000f0000) |
| #define HT_FBK_CFG0_HTMCS5FBK FIELD32(0x00f00000) |
| #define HT_FBK_CFG0_HTMCS6FBK FIELD32(0x0f000000) |
| #define HT_FBK_CFG0_HTMCS7FBK FIELD32(0xf0000000) |
| |
| /* |
| * HT_FBK_CFG1: |
| */ |
| #define HT_FBK_CFG1 0x1358 |
| #define HT_FBK_CFG1_HTMCS8FBK FIELD32(0x0000000f) |
| #define HT_FBK_CFG1_HTMCS9FBK FIELD32(0x000000f0) |
| #define HT_FBK_CFG1_HTMCS10FBK FIELD32(0x00000f00) |
| #define HT_FBK_CFG1_HTMCS11FBK FIELD32(0x0000f000) |
| #define HT_FBK_CFG1_HTMCS12FBK FIELD32(0x000f0000) |
| #define HT_FBK_CFG1_HTMCS13FBK FIELD32(0x00f00000) |
| #define HT_FBK_CFG1_HTMCS14FBK FIELD32(0x0f000000) |
| #define HT_FBK_CFG1_HTMCS15FBK FIELD32(0xf0000000) |
| |
| /* |
| * LG_FBK_CFG0: |
| */ |
| #define LG_FBK_CFG0 0x135c |
| #define LG_FBK_CFG0_OFDMMCS0FBK FIELD32(0x0000000f) |
| #define LG_FBK_CFG0_OFDMMCS1FBK FIELD32(0x000000f0) |
| #define LG_FBK_CFG0_OFDMMCS2FBK FIELD32(0x00000f00) |
| #define LG_FBK_CFG0_OFDMMCS3FBK FIELD32(0x0000f000) |
| #define LG_FBK_CFG0_OFDMMCS4FBK FIELD32(0x000f0000) |
| #define LG_FBK_CFG0_OFDMMCS5FBK FIELD32(0x00f00000) |
| #define LG_FBK_CFG0_OFDMMCS6FBK FIELD32(0x0f000000) |
| #define LG_FBK_CFG0_OFDMMCS7FBK FIELD32(0xf0000000) |
| |
| /* |
| * LG_FBK_CFG1: |
| */ |
| #define LG_FBK_CFG1 0x1360 |
| #define LG_FBK_CFG0_CCKMCS0FBK FIELD32(0x0000000f) |
| #define LG_FBK_CFG0_CCKMCS1FBK FIELD32(0x000000f0) |
| #define LG_FBK_CFG0_CCKMCS2FBK FIELD32(0x00000f00) |
| #define LG_FBK_CFG0_CCKMCS3FBK FIELD32(0x0000f000) |
| |
| /* |
| * CCK_PROT_CFG: CCK Protection |
| * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd) |
| * PROTECT_CTRL: Protection control frame type for CCK TX |
| * 0:none, 1:RTS/CTS, 2:CTS-to-self |
| * PROTECT_NAV_SHORT: TXOP protection type for CCK TX with short NAV |
| * PROTECT_NAV_LONG: TXOP protection type for CCK TX with long NAV |
| * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow |
| * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow |
| * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow |
| * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow |
| * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow |
| * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow |
| * RTS_TH_EN: RTS threshold enable on CCK TX |
| */ |
| #define CCK_PROT_CFG 0x1364 |
| #define CCK_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) |
| #define CCK_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) |
| #define CCK_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) |
| #define CCK_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) |
| #define CCK_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) |
| #define CCK_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) |
| #define CCK_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) |
| #define CCK_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) |
| #define CCK_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) |
| #define CCK_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) |
| #define CCK_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) |
| |
| /* |
| * OFDM_PROT_CFG: OFDM Protection |
| */ |
| #define OFDM_PROT_CFG 0x1368 |
| #define OFDM_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) |
| #define OFDM_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) |
| #define OFDM_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) |
| #define OFDM_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) |
| #define OFDM_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) |
| #define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) |
| #define OFDM_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) |
| #define OFDM_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) |
| #define OFDM_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) |
| #define OFDM_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) |
| #define OFDM_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) |
| |
| /* |
| * MM20_PROT_CFG: MM20 Protection |
| */ |
| #define MM20_PROT_CFG 0x136c |
| #define MM20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) |
| #define MM20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) |
| #define MM20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) |
| #define MM20_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) |
| #define MM20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) |
| #define MM20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) |
| #define MM20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) |
| #define MM20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) |
| #define MM20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) |
| #define MM20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) |
| #define MM20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) |
| |
| /* |
| * MM40_PROT_CFG: MM40 Protection |
| */ |
| #define MM40_PROT_CFG 0x1370 |
| #define MM40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) |
| #define MM40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) |
| #define MM40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) |
| #define MM40_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) |
| #define MM40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) |
| #define MM40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) |
| #define MM40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) |
| #define MM40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) |
| #define MM40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) |
| #define MM40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) |
| #define MM40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) |
| |
| /* |
| * GF20_PROT_CFG: GF20 Protection |
| */ |
| #define GF20_PROT_CFG 0x1374 |
| #define GF20_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) |
| #define GF20_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) |
| #define GF20_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) |
| #define GF20_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) |
| #define GF20_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) |
| #define GF20_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) |
| #define GF20_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) |
| #define GF20_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) |
| #define GF20_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) |
| #define GF20_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) |
| #define GF20_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) |
| |
| /* |
| * GF40_PROT_CFG: GF40 Protection |
| */ |
| #define GF40_PROT_CFG 0x1378 |
| #define GF40_PROT_CFG_PROTECT_RATE FIELD32(0x0000ffff) |
| #define GF40_PROT_CFG_PROTECT_CTRL FIELD32(0x00030000) |
| #define GF40_PROT_CFG_PROTECT_NAV_SHORT FIELD32(0x00040000) |
| #define GF40_PROT_CFG_PROTECT_NAV_LONG FIELD32(0x00080000) |
| #define GF40_PROT_CFG_TX_OP_ALLOW_CCK FIELD32(0x00100000) |
| #define GF40_PROT_CFG_TX_OP_ALLOW_OFDM FIELD32(0x00200000) |
| #define GF40_PROT_CFG_TX_OP_ALLOW_MM20 FIELD32(0x00400000) |
| #define GF40_PROT_CFG_TX_OP_ALLOW_MM40 FIELD32(0x00800000) |
| #define GF40_PROT_CFG_TX_OP_ALLOW_GF20 FIELD32(0x01000000) |
| #define GF40_PROT_CFG_TX_OP_ALLOW_GF40 FIELD32(0x02000000) |
| #define GF40_PROT_CFG_RTS_TH_EN FIELD32(0x04000000) |
| |
| /* |
| * EXP_CTS_TIME: |
| */ |
| #define EXP_CTS_TIME 0x137c |
| |
| /* |
| * EXP_ACK_TIME: |
| */ |
| #define EXP_ACK_TIME 0x1380 |
| |
| /* |
| * RX_FILTER_CFG: RX configuration register. |
| */ |
| #define RX_FILTER_CFG 0x1400 |
| #define RX_FILTER_CFG_DROP_CRC_ERROR FIELD32(0x00000001) |
| #define RX_FILTER_CFG_DROP_PHY_ERROR FIELD32(0x00000002) |
| #define RX_FILTER_CFG_DROP_NOT_TO_ME FIELD32(0x00000004) |
| #define RX_FILTER_CFG_DROP_NOT_MY_BSSD FIELD32(0x00000008) |
| #define RX_FILTER_CFG_DROP_VER_ERROR FIELD32(0x00000010) |
| #define RX_FILTER_CFG_DROP_MULTICAST FIELD32(0x00000020) |
| #define RX_FILTER_CFG_DROP_BROADCAST FIELD32(0x00000040) |
| #define RX_FILTER_CFG_DROP_DUPLICATE FIELD32(0x00000080) |
| #define RX_FILTER_CFG_DROP_CF_END_ACK FIELD32(0x00000100) |
| #define RX_FILTER_CFG_DROP_CF_END FIELD32(0x00000200) |
| #define RX_FILTER_CFG_DROP_ACK FIELD32(0x00000400) |
| #define RX_FILTER_CFG_DROP_CTS FIELD32(0x00000800) |
| #define RX_FILTER_CFG_DROP_RTS FIELD32(0x00001000) |
| #define RX_FILTER_CFG_DROP_PSPOLL FIELD32(0x00002000) |
| #define RX_FILTER_CFG_DROP_BA FIELD32(0x00004000) |
| #define RX_FILTER_CFG_DROP_BAR FIELD32(0x00008000) |
| #define RX_FILTER_CFG_DROP_CNTL FIELD32(0x00010000) |
| |
| /* |
| * AUTO_RSP_CFG: |
| * AUTORESPONDER: 0: disable, 1: enable |
| * BAC_ACK_POLICY: 0:long, 1:short preamble |
| * CTS_40_MMODE: Response CTS 40MHz duplicate mode |
| * CTS_40_MREF: Response CTS 40MHz duplicate mode |
| * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble |
| * DUAL_CTS_EN: Power bit value in control frame |
| * ACK_CTS_PSM_BIT:Power bit value in control frame |
| */ |
| #define AUTO_RSP_CFG 0x1404 |
| #define AUTO_RSP_CFG_AUTORESPONDER FIELD32(0x00000001) |
| #define AUTO_RSP_CFG_BAC_ACK_POLICY FIELD32(0x00000002) |
| #define AUTO_RSP_CFG_CTS_40_MMODE FIELD32(0x00000004) |
| #define AUTO_RSP_CFG_CTS_40_MREF FIELD32(0x00000008) |
| #define AUTO_RSP_CFG_AR_PREAMBLE FIELD32(0x00000010) |
| #define AUTO_RSP_CFG_DUAL_CTS_EN FIELD32(0x00000040) |
| #define AUTO_RSP_CFG_ACK_CTS_PSM_BIT FIELD32(0x00000080) |
| |
| /* |
| * LEGACY_BASIC_RATE: |
| */ |
| #define LEGACY_BASIC_RATE 0x1408 |
| |
| /* |
| * HT_BASIC_RATE: |
| */ |
| #define HT_BASIC_RATE 0x140c |
| |
| /* |
| * HT_CTRL_CFG: |
| */ |
| #define HT_CTRL_CFG 0x1410 |
| |
| /* |
| * SIFS_COST_CFG: |
| */ |
| #define SIFS_COST_CFG 0x1414 |
| |
| /* |
| * RX_PARSER_CFG: |
| * Set NAV for all received frames |
| */ |
| #define RX_PARSER_CFG 0x1418 |
| |
| /* |
| * TX_SEC_CNT0: |
| */ |
| #define TX_SEC_CNT0 0x1500 |
| |
| /* |
| * RX_SEC_CNT0: |
| */ |
| #define RX_SEC_CNT0 0x1504 |
| |
| /* |
| * CCMP_FC_MUTE: |
| */ |
| #define CCMP_FC_MUTE 0x1508 |
| |
| /* |
| * TXOP_HLDR_ADDR0: |
| */ |
| #define TXOP_HLDR_ADDR0 0x1600 |
| |
| /* |
| * TXOP_HLDR_ADDR1: |
| */ |
| #define TXOP_HLDR_ADDR1 0x1604 |
| |
| /* |
| * TXOP_HLDR_ET: |
| */ |
| #define TXOP_HLDR_ET 0x1608 |
| |
| /* |
| * QOS_CFPOLL_RA_DW0: |
| */ |
| #define QOS_CFPOLL_RA_DW0 0x160c |
| |
| /* |
| * QOS_CFPOLL_RA_DW1: |
| */ |
| #define QOS_CFPOLL_RA_DW1 0x1610 |
| |
| /* |
| * QOS_CFPOLL_QC: |
| */ |
| #define QOS_CFPOLL_QC 0x1614 |
| |
| /* |
| * RX_STA_CNT0: RX PLCP error count & RX CRC error count |
| */ |
| #define RX_STA_CNT0 0x1700 |
| #define RX_STA_CNT0_CRC_ERR FIELD32(0x0000ffff) |
| #define RX_STA_CNT0_PHY_ERR FIELD32(0xffff0000) |
| |
| /* |
| * RX_STA_CNT1: RX False CCA count & RX LONG frame count |
| */ |
| #define RX_STA_CNT1 0x1704 |
| #define RX_STA_CNT1_FALSE_CCA FIELD32(0x0000ffff) |
| #define RX_STA_CNT1_PLCP_ERR FIELD32(0xffff0000) |
| |
| /* |
| * RX_STA_CNT2: |
| */ |
| #define RX_STA_CNT2 0x1708 |
| #define RX_STA_CNT2_RX_DUPLI_COUNT FIELD32(0x0000ffff) |
| #define RX_STA_CNT2_RX_FIFO_OVERFLOW FIELD32(0xffff0000) |
| |
| /* |
| * TX_STA_CNT0: TX Beacon count |
| */ |
| #define TX_STA_CNT0 0x170c |
| #define TX_STA_CNT0_TX_FAIL_COUNT FIELD32(0x0000ffff) |
| #define TX_STA_CNT0_TX_BEACON_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * TX_STA_CNT1: TX tx count |
| */ |
| #define TX_STA_CNT1 0x1710 |
| #define TX_STA_CNT1_TX_SUCCESS FIELD32(0x0000ffff) |
| #define TX_STA_CNT1_TX_RETRANSMIT FIELD32(0xffff0000) |
| |
| /* |
| * TX_STA_CNT2: TX tx count |
| */ |
| #define TX_STA_CNT2 0x1714 |
| #define TX_STA_CNT2_TX_ZERO_LEN_COUNT FIELD32(0x0000ffff) |
| #define TX_STA_CNT2_TX_UNDER_FLOW_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * TX_STA_FIFO: TX Result for specific PID status fifo register. |
| * |
| * This register is implemented as FIFO with 16 entries in the HW. Each |
| * register read fetches the next tx result. If the FIFO is full because |
| * it wasn't read fast enough after the according interrupt (TX_FIFO_STATUS) |
| * triggered, the hw seems to simply drop further tx results. |
| * |
| * VALID: 1: this tx result is valid |
| * 0: no valid tx result -> driver should stop reading |
| * PID_TYPE: The PID latched from the PID field in the TXWI, can be used |
| * to match a frame with its tx result (even though the PID is |
| * only 4 bits wide). |
| * PID_QUEUE: Part of PID_TYPE, this is the queue index number (0-3) |
| * PID_ENTRY: Part of PID_TYPE, this is the queue entry index number (1-3) |
| * This identification number is calculated by ((idx % 3) + 1). |
| * TX_SUCCESS: Indicates tx success (1) or failure (0) |
| * TX_AGGRE: Indicates if the frame was part of an aggregate (1) or not (0) |
| * TX_ACK_REQUIRED: Indicates if the frame needed to get ack'ed (1) or not (0) |
| * WCID: The wireless client ID. |
| * MCS: The tx rate used during the last transmission of this frame, be it |
| * successful or not. |
| * PHYMODE: The phymode used for the transmission. |
| */ |
| #define TX_STA_FIFO 0x1718 |
| #define TX_STA_FIFO_VALID FIELD32(0x00000001) |
| #define TX_STA_FIFO_PID_TYPE FIELD32(0x0000001e) |
| #define TX_STA_FIFO_PID_QUEUE FIELD32(0x00000006) |
| #define TX_STA_FIFO_PID_ENTRY FIELD32(0x00000018) |
| #define TX_STA_FIFO_TX_SUCCESS FIELD32(0x00000020) |
| #define TX_STA_FIFO_TX_AGGRE FIELD32(0x00000040) |
| #define TX_STA_FIFO_TX_ACK_REQUIRED FIELD32(0x00000080) |
| #define TX_STA_FIFO_WCID FIELD32(0x0000ff00) |
| #define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000) |
| #define TX_STA_FIFO_MCS FIELD32(0x007f0000) |
| #define TX_STA_FIFO_PHYMODE FIELD32(0xc0000000) |
| |
| /* |
| * TX_AGG_CNT: Debug counter |
| */ |
| #define TX_AGG_CNT 0x171c |
| #define TX_AGG_CNT_NON_AGG_TX_COUNT FIELD32(0x0000ffff) |
| #define TX_AGG_CNT_AGG_TX_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * TX_AGG_CNT0: |
| */ |
| #define TX_AGG_CNT0 0x1720 |
| #define TX_AGG_CNT0_AGG_SIZE_1_COUNT FIELD32(0x0000ffff) |
| #define TX_AGG_CNT0_AGG_SIZE_2_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * TX_AGG_CNT1: |
| */ |
| #define TX_AGG_CNT1 0x1724 |
| #define TX_AGG_CNT1_AGG_SIZE_3_COUNT FIELD32(0x0000ffff) |
| #define TX_AGG_CNT1_AGG_SIZE_4_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * TX_AGG_CNT2: |
| */ |
| #define TX_AGG_CNT2 0x1728 |
| #define TX_AGG_CNT2_AGG_SIZE_5_COUNT FIELD32(0x0000ffff) |
| #define TX_AGG_CNT2_AGG_SIZE_6_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * TX_AGG_CNT3: |
| */ |
| #define TX_AGG_CNT3 0x172c |
| #define TX_AGG_CNT3_AGG_SIZE_7_COUNT FIELD32(0x0000ffff) |
| #define TX_AGG_CNT3_AGG_SIZE_8_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * TX_AGG_CNT4: |
| */ |
| #define TX_AGG_CNT4 0x1730 |
| #define TX_AGG_CNT4_AGG_SIZE_9_COUNT FIELD32(0x0000ffff) |
| #define TX_AGG_CNT4_AGG_SIZE_10_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * TX_AGG_CNT5: |
| */ |
| #define TX_AGG_CNT5 0x1734 |
| #define TX_AGG_CNT5_AGG_SIZE_11_COUNT FIELD32(0x0000ffff) |
| #define TX_AGG_CNT5_AGG_SIZE_12_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * TX_AGG_CNT6: |
| */ |
| #define TX_AGG_CNT6 0x1738 |
| #define TX_AGG_CNT6_AGG_SIZE_13_COUNT FIELD32(0x0000ffff) |
| #define TX_AGG_CNT6_AGG_SIZE_14_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * TX_AGG_CNT7: |
| */ |
| #define TX_AGG_CNT7 0x173c |
| #define TX_AGG_CNT7_AGG_SIZE_15_COUNT FIELD32(0x0000ffff) |
| #define TX_AGG_CNT7_AGG_SIZE_16_COUNT FIELD32(0xffff0000) |
| |
| /* |
| * MPDU_DENSITY_CNT: |
| * TX_ZERO_DEL: TX zero length delimiter count |
| * RX_ZERO_DEL: RX zero length delimiter count |
| */ |
| #define MPDU_DENSITY_CNT 0x1740 |
| #define MPDU_DENSITY_CNT_TX_ZERO_DEL FIELD32(0x0000ffff) |
| #define MPDU_DENSITY_CNT_RX_ZERO_DEL FIELD32(0xffff0000) |
| |
| /* |
| * Security key table memory. |
| * |
| * The pairwise key table shares some memory with the beacon frame |
| * buffers 6 and 7. That basically means that when beacon 6 & 7 |
| * are used we should only use the reduced pairwise key table which |
| * has a maximum of 222 entries. |
| * |
| * --------------------------------------------- |
| * |0x4000 | Pairwise Key | Reduced Pairwise | |
| * | | Table | Key Table | |
| * | | Size: 256 * 32 | Size: 222 * 32 | |
| * |0x5BC0 | |------------------- |
| * | | | Beacon 6 | |
| * |0x5DC0 | |------------------- |
| * | | | Beacon 7 | |
| * |0x5FC0 | |------------------- |
| * |0x5FFF | | |
| * -------------------------- |
| * |
| * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry |
| * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry |
| * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry |
| * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry |
| * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry |
| * SHARED_KEY_MODE_BASE: 4-byte * 16-entry |
| */ |
| #define MAC_WCID_BASE 0x1800 |
| #define PAIRWISE_KEY_TABLE_BASE 0x4000 |
| #define MAC_IVEIV_TABLE_BASE 0x6000 |
| #define MAC_WCID_ATTRIBUTE_BASE 0x6800 |
| #define SHARED_KEY_TABLE_BASE 0x6c00 |
| #define SHARED_KEY_MODE_BASE 0x7000 |
| |
| #define MAC_WCID_ENTRY(__idx) \ |
| (MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry))) |
| #define PAIRWISE_KEY_ENTRY(__idx) \ |
| (PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry))) |
| #define MAC_IVEIV_ENTRY(__idx) \ |
| (MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry))) |
| #define MAC_WCID_ATTR_ENTRY(__idx) \ |
| (MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32))) |
| #define SHARED_KEY_ENTRY(__idx) \ |
| (SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry))) |
| #define SHARED_KEY_MODE_ENTRY(__idx) \ |
| (SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32))) |
| |
| struct mac_wcid_entry { |
| u8 mac[6]; |
| u8 reserved[2]; |
| } __packed; |
| |
| struct hw_key_entry { |
| u8 key[16]; |
| u8 tx_mic[8]; |
| u8 rx_mic[8]; |
| } __packed; |
| |
| struct mac_iveiv_entry { |
| u8 iv[8]; |
| } __packed; |
| |
| /* |
| * MAC_WCID_ATTRIBUTE: |
| */ |
| #define MAC_WCID_ATTRIBUTE_KEYTAB FIELD32(0x00000001) |
| #define MAC_WCID_ATTRIBUTE_CIPHER FIELD32(0x0000000e) |
| #define MAC_WCID_ATTRIBUTE_BSS_IDX FIELD32(0x00000070) |
| #define MAC_WCID_ATTRIBUTE_RX_WIUDF FIELD32(0x00000380) |
| #define MAC_WCID_ATTRIBUTE_CIPHER_EXT FIELD32(0x00000400) |
| #define MAC_WCID_ATTRIBUTE_BSS_IDX_EXT FIELD32(0x00000800) |
| #define MAC_WCID_ATTRIBUTE_WAPI_MCBC FIELD32(0x00008000) |
| #define MAC_WCID_ATTRIBUTE_WAPI_KEY_IDX FIELD32(0xff000000) |
| |
| /* |
| * SHARED_KEY_MODE: |
| */ |
| #define SHARED_KEY_MODE_BSS0_KEY0 FIELD32(0x00000007) |
| #define SHARED_KEY_MODE_BSS0_KEY1 FIELD32(0x00000070) |
| #define SHARED_KEY_MODE_BSS0_KEY2 FIELD32(0x00000700) |
| #define SHARED_KEY_MODE_BSS0_KEY3 FIELD32(0x00007000) |
| #define SHARED_KEY_MODE_BSS1_KEY0 FIELD32(0x00070000) |
| #define SHARED_KEY_MODE_BSS1_KEY1 FIELD32(0x00700000) |
| #define SHARED_KEY_MODE_BSS1_KEY2 FIELD32(0x07000000) |
| #define SHARED_KEY_MODE_BSS1_KEY3 FIELD32(0x70000000) |
| |
| /* |
| * HOST-MCU communication |
| */ |
| |
| /* |
| * H2M_MAILBOX_CSR: Host-to-MCU Mailbox. |
| */ |
| #define H2M_MAILBOX_CSR 0x7010 |
| #define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff) |
| #define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00) |
| #define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000) |
| #define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000) |
| |
| /* |
| * H2M_MAILBOX_CID: |
| */ |
| #define H2M_MAILBOX_CID 0x7014 |
| #define H2M_MAILBOX_CID_CMD0 FIELD32(0x000000ff) |
| #define H2M_MAILBOX_CID_CMD1 FIELD32(0x0000ff00) |
| #define H2M_MAILBOX_CID_CMD2 FIELD32(0x00ff0000) |
| #define H2M_MAILBOX_CID_CMD3 FIELD32(0xff000000) |
| |
| /* |
| * H2M_MAILBOX_STATUS: |
| */ |
| #define H2M_MAILBOX_STATUS 0x701c |
| |
| /* |
| * H2M_INT_SRC: |
| */ |
| #define H2M_INT_SRC 0x7024 |
| |
| /* |
| * H2M_BBP_AGENT: |
| */ |
| #define H2M_BBP_AGENT 0x7028 |
| |
| /* |
| * MCU_LEDCS: LED control for MCU Mailbox. |
| */ |
| #define MCU_LEDCS_LED_MODE FIELD8(0x1f) |
| #define MCU_LEDCS_POLARITY FIELD8(0x01) |
| |
| /* |
| * HW_CS_CTS_BASE: |
| * Carrier-sense CTS frame base address. |
| * It's where mac stores carrier-sense frame for carrier-sense function. |
| */ |
| #define HW_CS_CTS_BASE 0x7700 |
| |
| /* |
| * HW_DFS_CTS_BASE: |
| * DFS CTS frame base address. It's where mac stores CTS frame for DFS. |
| */ |
| #define HW_DFS_CTS_BASE 0x7780 |
| |
| /* |
| * TXRX control registers - base address 0x3000 |
| */ |
| |
| /* |
| * TXRX_CSR1: |
| * rt2860b UNKNOWN reg use R/O Reg Addr 0x77d0 first.. |
| */ |
| #define TXRX_CSR1 0x77d0 |
| |
| /* |
| * HW_DEBUG_SETTING_BASE: |
| * since NULL frame won't be that long (256 byte) |
| * We steal 16 tail bytes to save debugging settings |
| */ |
| #define HW_DEBUG_SETTING_BASE 0x77f0 |
| #define HW_DEBUG_SETTING_BASE2 0x7770 |
| |
| /* |
| * HW_BEACON_BASE |
| * In order to support maximum 8 MBSS and its maximum length |
| * is 512 bytes for each beacon |
| * Three section discontinue memory segments will be used. |
| * 1. The original region for BCN 0~3 |
| * 2. Extract memory from FCE table for BCN 4~5 |
| * 3. Extract memory from Pair-wise key table for BCN 6~7 |
| * It occupied those memory of wcid 238~253 for BCN 6 |
| * and wcid 222~237 for BCN 7 (see Security key table memory |
| * for more info). |
| * |
| * IMPORTANT NOTE: Not sure why legacy driver does this, |
| * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6. |
| */ |
| #define HW_BEACON_BASE0 0x7800 |
| #define HW_BEACON_BASE1 0x7a00 |
| #define HW_BEACON_BASE2 0x7c00 |
| #define HW_BEACON_BASE3 0x7e00 |
| #define HW_BEACON_BASE4 0x7200 |
| #define HW_BEACON_BASE5 0x7400 |
| #define HW_BEACON_BASE6 0x5dc0 |
| #define HW_BEACON_BASE7 0x5bc0 |
| |
| #define HW_BEACON_OFFSET(__index) \ |
| (((__index) < 4) ? (HW_BEACON_BASE0 + (__index * 0x0200)) : \ |
| (((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \ |
| (HW_BEACON_BASE6 - ((__index - 6) * 0x0200)))) |
| |
| /* |
| * BBP registers. |
| * The wordsize of the BBP is 8 bits. |
| */ |
| |
| /* |
| * BBP 1: TX Antenna & Power Control |
| * POWER_CTRL: |
| * 0 - normal, |
| * 1 - drop tx power by 6dBm, |
| * 2 - drop tx power by 12dBm, |
| * 3 - increase tx power by 6dBm |
| */ |
| #define BBP1_TX_POWER_CTRL FIELD8(0x07) |
| #define BBP1_TX_ANTENNA FIELD8(0x18) |
| |
| /* |
| * BBP 3: RX Antenna |
| */ |
| #define BBP3_RX_ADC FIELD8(0x03) |
| #define BBP3_RX_ANTENNA FIELD8(0x18) |
| #define BBP3_HT40_MINUS FIELD8(0x20) |
| |
| /* |
| * BBP 4: Bandwidth |
| */ |
| #define BBP4_TX_BF FIELD8(0x01) |
| #define BBP4_BANDWIDTH FIELD8(0x18) |
| #define BBP4_MAC_IF_CTRL FIELD8(0x40) |
| |
| /* |
| * BBP 109 |
| */ |
| #define BBP109_TX0_POWER FIELD8(0x0f) |
| #define BBP109_TX1_POWER FIELD8(0xf0) |
| |
| /* |
| * BBP 138: Unknown |
| */ |
| #define BBP138_RX_ADC1 FIELD8(0x02) |
| #define BBP138_RX_ADC2 FIELD8(0x04) |
| #define BBP138_TX_DAC1 FIELD8(0x20) |
| #define BBP138_TX_DAC2 FIELD8(0x40) |
| |
| /* |
| * BBP 152: Rx Ant |
| */ |
| #define BBP152_RX_DEFAULT_ANT FIELD8(0x80) |
| |
| /* |
| * RFCSR registers |
| * The wordsize of the RFCSR is 8 bits. |
| */ |
| |
| /* |
| * RFCSR 1: |
| */ |
| #define RFCSR1_RF_BLOCK_EN FIELD8(0x01) |
| #define RFCSR1_PLL_PD FIELD8(0x02) |
| #define RFCSR1_RX0_PD FIELD8(0x04) |
| #define RFCSR1_TX0_PD FIELD8(0x08) |
| #define RFCSR1_RX1_PD FIELD8(0x10) |
| #define RFCSR1_TX1_PD FIELD8(0x20) |
| #define RFCSR1_RX2_PD FIELD8(0x40) |
| #define RFCSR1_TX2_PD FIELD8(0x80) |
| |
| /* |
| * RFCSR 2: |
| */ |
| #define RFCSR2_RESCAL_EN FIELD8(0x80) |
| |
| /* |
| * FRCSR 5: |
| */ |
| #define RFCSR5_R1 FIELD8(0x0c) |
| |
| /* |
| * RFCSR 6: |
| */ |
| #define RFCSR6_R1 FIELD8(0x03) |
| #define RFCSR6_R2 FIELD8(0x40) |
| #define RFCSR6_TXDIV FIELD8(0x0c) |
| |
| /* |
| * RFCSR 7: |
| */ |
| #define RFCSR7_RF_TUNING FIELD8(0x01) |
| #define RFCSR7_R02 FIELD8(0x07) |
| #define RFCSR7_R3 FIELD8(0x08) |
| #define RFCSR7_R45 FIELD8(0x30) |
| #define RFCSR7_R67 FIELD8(0xc0) |
| |
| /* |
| * RFCSR 11: |
| */ |
| #define RFCSR11_R FIELD8(0x03) |
| |
| /* |
| * RFCSR 12: |
| */ |
| #define RFCSR12_TX_POWER FIELD8(0x1f) |
| #define RFCSR12_DR0 FIELD8(0xe0) |
| |
| /* |
| * RFCSR 13: |
| */ |
| #define RFCSR13_TX_POWER FIELD8(0x1f) |
| #define RFCSR13_DR0 FIELD8(0xe0) |
| |
| /* |
| * RFCSR 15: |
| */ |
| #define RFCSR15_TX_LO2_EN FIELD8(0x08) |
| |
| /* |
| * RFCSR 17: |
| */ |
| #define RFCSR17_TXMIXER_GAIN FIELD8(0x07) |
| #define RFCSR17_TX_LO1_EN FIELD8(0x08) |
| #define RFCSR17_R FIELD8(0x20) |
| #define RFCSR17_CODE FIELD8(0x7f) |
| |
| /* |
| * RFCSR 20: |
| */ |
| #define RFCSR20_RX_LO1_EN FIELD8(0x08) |
| |
| /* |
| * RFCSR 21: |
| */ |
| #define RFCSR21_RX_LO2_EN FIELD8(0x08) |
| |
| /* |
| * RFCSR 22: |
| */ |
| #define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) |
| |
| /* |
| * RFCSR 23: |
| */ |
| #define RFCSR23_FREQ_OFFSET FIELD8(0x7f) |
| |
| /* |
| * RFCSR 27: |
| */ |
| #define RFCSR27_R1 FIELD8(0x03) |
| #define RFCSR27_R2 FIELD8(0x04) |
| #define RFCSR27_R3 FIELD8(0x30) |
| #define RFCSR27_R4 FIELD8(0x40) |
| |
| /* |
| * RFCSR 30: |
| */ |
| #define RFCSR30_TX_H20M FIELD8(0x02) |
| #define RFCSR30_RX_H20M FIELD8(0x04) |
| #define RFCSR30_RX_VCM FIELD8(0x18) |
| #define RFCSR30_RF_CALIBRATION FIELD8(0x80) |
| |
| /* |
| * RFCSR 31: |
| */ |
| #define RFCSR31_RX_AGC_FC FIELD8(0x1f) |
| #define RFCSR31_RX_H20M FIELD8(0x20) |
| |
| /* |
| * RFCSR 38: |
| */ |
| #define RFCSR38_RX_LO1_EN FIELD8(0x20) |
| |
| /* |
| * RFCSR 39: |
| */ |
| #define RFCSR39_RX_LO2_EN FIELD8(0x80) |
| |
| /* |
| * RFCSR 49: |
| */ |
| #define RFCSR49_TX FIELD8(0x3f) |
| |
| /* |
| * RF registers |
| */ |
| |
| /* |
| * RF 2 |
| */ |
| #define RF2_ANTENNA_RX2 FIELD32(0x00000040) |
| #define RF2_ANTENNA_TX1 FIELD32(0x00004000) |
| #define RF2_ANTENNA_RX1 FIELD32(0x00020000) |
| |
| /* |
| * RF 3 |
| */ |
| #define RF3_TXPOWER_G FIELD32(0x00003e00) |
| #define RF3_TXPOWER_A_7DBM_BOOST FIELD32(0x00000200) |
| #define RF3_TXPOWER_A FIELD32(0x00003c00) |
| |
| /* |
| * RF 4 |
| */ |
| #define RF4_TXPOWER_G FIELD32(0x000007c0) |
| #define RF4_TXPOWER_A_7DBM_BOOST FIELD32(0x00000040) |
| #define RF4_TXPOWER_A FIELD32(0x00000780) |
| #define RF4_FREQ_OFFSET FIELD32(0x001f8000) |
| #define RF4_HT40 FIELD32(0x00200000) |
| |
| /* |
| * EEPROM content. |
| * The wordsize of the EEPROM is 16 bits. |
| */ |
| |
| /* |
| * Chip ID |
| */ |
| #define EEPROM_CHIP_ID 0x0000 |
| |
| /* |
| * EEPROM Version |
| */ |
| #define EEPROM_VERSION 0x0001 |
| #define EEPROM_VERSION_FAE FIELD16(0x00ff) |
| #define EEPROM_VERSION_VERSION FIELD16(0xff00) |
| |
| /* |
| * HW MAC address. |
| */ |
| #define EEPROM_MAC_ADDR_0 0x0002 |
| #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff) |
| #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00) |
| #define EEPROM_MAC_ADDR_1 0x0003 |
| #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff) |
| #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00) |
| #define EEPROM_MAC_ADDR_2 0x0004 |
| #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff) |
| #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00) |
| |
| /* |
| * EEPROM NIC Configuration 0 |
| * RXPATH: 1: 1R, 2: 2R, 3: 3R |
| * TXPATH: 1: 1T, 2: 2T, 3: 3T |
| * RF_TYPE: RFIC type |
| */ |
| #define EEPROM_NIC_CONF0 0x001a |
| #define EEPROM_NIC_CONF0_RXPATH FIELD16(0x000f) |
| #define EEPROM_NIC_CONF0_TXPATH FIELD16(0x00f0) |
| #define EEPROM_NIC_CONF0_RF_TYPE FIELD16(0x0f00) |
| |
| /* |
| * EEPROM NIC Configuration 1 |
| * HW_RADIO: 0: disable, 1: enable |
| * EXTERNAL_TX_ALC: 0: disable, 1: enable |
| * EXTERNAL_LNA_2G: 0: disable, 1: enable |
| * EXTERNAL_LNA_5G: 0: disable, 1: enable |
| * CARDBUS_ACCEL: 0: enable, 1: disable |
| * BW40M_SB_2G: 0: disable, 1: enable |
| * BW40M_SB_5G: 0: disable, 1: enable |
| * WPS_PBC: 0: disable, 1: enable |
| * BW40M_2G: 0: enable, 1: disable |
| * BW40M_5G: 0: enable, 1: disable |
| * BROADBAND_EXT_LNA: 0: disable, 1: enable |
| * ANT_DIVERSITY: 00: Disable, 01: Diversity, |
| * 10: Main antenna, 11: Aux antenna |
| * INTERNAL_TX_ALC: 0: disable, 1: enable |
| * BT_COEXIST: 0: disable, 1: enable |
| * DAC_TEST: 0: disable, 1: enable |
| */ |
| #define EEPROM_NIC_CONF1 0x001b |
| #define EEPROM_NIC_CONF1_HW_RADIO FIELD16(0x0001) |
| #define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC FIELD16(0x0002) |
| #define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G FIELD16(0x0004) |
| #define EEPROM_NIC_CONF1_EXTERNAL_LNA_5G FIELD16(0x0008) |
| #define EEPROM_NIC_CONF1_CARDBUS_ACCEL FIELD16(0x0010) |
| #define EEPROM_NIC_CONF1_BW40M_SB_2G FIELD16(0x0020) |
| #define EEPROM_NIC_CONF1_BW40M_SB_5G FIELD16(0x0040) |
| #define EEPROM_NIC_CONF1_WPS_PBC FIELD16(0x0080) |
| #define EEPROM_NIC_CONF1_BW40M_2G FIELD16(0x0100) |
| #define EEPROM_NIC_CONF1_BW40M_5G FIELD16(0x0200) |
| #define EEPROM_NIC_CONF1_BROADBAND_EXT_LNA FIELD16(0x400) |
| #define EEPROM_NIC_CONF1_ANT_DIVERSITY FIELD16(0x1800) |
| #define EEPROM_NIC_CONF1_INTERNAL_TX_ALC FIELD16(0x2000) |
| #define EEPROM_NIC_CONF1_BT_COEXIST FIELD16(0x4000) |
| #define EEPROM_NIC_CONF1_DAC_TEST FIELD16(0x8000) |
| |
| /* |
| * EEPROM frequency |
| */ |
| #define EEPROM_FREQ 0x001d |
| #define EEPROM_FREQ_OFFSET FIELD16(0x00ff) |
| #define EEPROM_FREQ_LED_MODE FIELD16(0x7f00) |
| #define EEPROM_FREQ_LED_POLARITY FIELD16(0x1000) |
| |
| /* |
| * EEPROM LED |
| * POLARITY_RDY_G: Polarity RDY_G setting. |
| * POLARITY_RDY_A: Polarity RDY_A setting. |
| * POLARITY_ACT: Polarity ACT setting. |
| * POLARITY_GPIO_0: Polarity GPIO0 setting. |
| * POLARITY_GPIO_1: Polarity GPIO1 setting. |
| * POLARITY_GPIO_2: Polarity GPIO2 setting. |
| * POLARITY_GPIO_3: Polarity GPIO3 setting. |
| * POLARITY_GPIO_4: Polarity GPIO4 setting. |
| * LED_MODE: Led mode. |
| */ |
| #define EEPROM_LED_AG_CONF 0x001e |
| #define EEPROM_LED_ACT_CONF 0x001f |
| #define EEPROM_LED_POLARITY 0x0020 |
| #define EEPROM_LED_POLARITY_RDY_BG FIELD16(0x0001) |
| #define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002) |
| #define EEPROM_LED_POLARITY_ACT FIELD16(0x0004) |
| #define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008) |
| #define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010) |
| #define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020) |
| #define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040) |
| #define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080) |
| #define EEPROM_LED_LED_MODE FIELD16(0x1f00) |
| |
| /* |
| * EEPROM NIC Configuration 2 |
| * RX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream |
| * TX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream |
| * CRYSTAL: 00: Reserved, 01: One crystal, 10: Two crystal, 11: Reserved |
| */ |
| #define EEPROM_NIC_CONF2 0x0021 |
| #define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f) |
| #define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0) |
| #define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600) |
| |
| /* |
| * EEPROM LNA |
| */ |
| #define EEPROM_LNA 0x0022 |
| #define EEPROM_LNA_BG FIELD16(0x00ff) |
| #define EEPROM_LNA_A0 FIELD16(0xff00) |
| |
| /* |
| * EEPROM RSSI BG offset |
| */ |
| #define EEPROM_RSSI_BG 0x0023 |
| #define EEPROM_RSSI_BG_OFFSET0 FIELD16(0x00ff) |
| #define EEPROM_RSSI_BG_OFFSET1 FIELD16(0xff00) |
| |
| /* |
| * EEPROM RSSI BG2 offset |
| */ |
| #define EEPROM_RSSI_BG2 0x0024 |
| #define EEPROM_RSSI_BG2_OFFSET2 FIELD16(0x00ff) |
| #define EEPROM_RSSI_BG2_LNA_A1 FIELD16(0xff00) |
| |
| /* |
| * EEPROM TXMIXER GAIN BG offset (note overlaps with EEPROM RSSI BG2). |
| */ |
| #define EEPROM_TXMIXER_GAIN_BG 0x0024 |
| #define EEPROM_TXMIXER_GAIN_BG_VAL FIELD16(0x0007) |
| |
| /* |
| * EEPROM RSSI A offset |
| */ |
| #define EEPROM_RSSI_A 0x0025 |
| #define EEPROM_RSSI_A_OFFSET0 FIELD16(0x00ff) |
| #define EEPROM_RSSI_A_OFFSET1 FIELD16(0xff00) |
| |
| /* |
| * EEPROM RSSI A2 offset |
| */ |
| #define EEPROM_RSSI_A2 0x0026 |
| #define EEPROM_RSSI_A2_OFFSET2 FIELD16(0x00ff) |
| #define EEPROM_RSSI_A2_LNA_A2 FIELD16(0xff00) |
| |
| /* |
| * EEPROM EIRP Maximum TX power values(unit: dbm) |
| */ |
| #define EEPROM_EIRP_MAX_TX_POWER 0x0027 |
| #define EEPROM_EIRP_MAX_TX_POWER_2GHZ FIELD16(0x00ff) |
| #define EEPROM_EIRP_MAX_TX_POWER_5GHZ FIELD16(0xff00) |
| |
| /* |
| * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power. |
| * This is delta in 40MHZ. |
| * VALUE: Tx Power dalta value, MAX=4(unit: dbm) |
| * TYPE: 1: Plus the delta value, 0: minus the delta value |
| * ENABLE: enable tx power compensation for 40BW |
| */ |
| #define EEPROM_TXPOWER_DELTA 0x0028 |
| #define EEPROM_TXPOWER_DELTA_VALUE_2G FIELD16(0x003f) |
| #define EEPROM_TXPOWER_DELTA_TYPE_2G FIELD16(0x0040) |
| #define EEPROM_TXPOWER_DELTA_ENABLE_2G FIELD16(0x0080) |
| #define EEPROM_TXPOWER_DELTA_VALUE_5G FIELD16(0x3f00) |
| #define EEPROM_TXPOWER_DELTA_TYPE_5G FIELD16(0x4000) |
| #define EEPROM_TXPOWER_DELTA_ENABLE_5G FIELD16(0x8000) |
| |
| /* |
| * EEPROM TXPOWER 802.11BG |
| */ |
| #define EEPROM_TXPOWER_BG1 0x0029 |
| #define EEPROM_TXPOWER_BG2 0x0030 |
| #define EEPROM_TXPOWER_BG_SIZE 7 |
| #define EEPROM_TXPOWER_BG_1 FIELD16(0x00ff) |
| #define EEPROM_TXPOWER_BG_2 FIELD16(0xff00) |
| |
| /* |
| * EEPROM temperature compensation boundaries 802.11BG |
| * MINUS4: If the actual TSSI is below this boundary, tx power needs to be |
| * reduced by (agc_step * -4) |
| * MINUS3: If the actual TSSI is below this boundary, tx power needs to be |
| * reduced by (agc_step * -3) |
| */ |
| #define EEPROM_TSSI_BOUND_BG1 0x0037 |
| #define EEPROM_TSSI_BOUND_BG1_MINUS4 FIELD16(0x00ff) |
| #define EEPROM_TSSI_BOUND_BG1_MINUS3 FIELD16(0xff00) |
| |
| /* |
| * EEPROM temperature compensation boundaries 802.11BG |
| * MINUS2: If the actual TSSI is below this boundary, tx power needs to be |
| * reduced by (agc_step * -2) |
| * MINUS1: If the actual TSSI is below this boundary, tx power needs to be |
| * reduced by (agc_step * -1) |
| */ |
| #define EEPROM_TSSI_BOUND_BG2 0x0038 |
| #define EEPROM_TSSI_BOUND_BG2_MINUS2 FIELD16(0x00ff) |
| #define EEPROM_TSSI_BOUND_BG2_MINUS1 FIELD16(0xff00) |
| |
| /* |
| * EEPROM temperature compensation boundaries 802.11BG |
| * REF: Reference TSSI value, no tx power changes needed |
| * PLUS1: If the actual TSSI is above this boundary, tx power needs to be |
| * increased by (agc_step * 1) |
| */ |
| #define EEPROM_TSSI_BOUND_BG3 0x0039 |
| #define EEPROM_TSSI_BOUND_BG3_REF FIELD16(0x00ff) |
| #define EEPROM_TSSI_BOUND_BG3_PLUS1 FIELD16(0xff00) |
| |
| /* |
| * EEPROM temperature compensation boundaries 802.11BG |
| * PLUS2: If the actual TSSI is above this boundary, tx power needs to be |
| * increased by (agc_step * 2) |
| * PLUS3: If the actual TSSI is above this boundary, tx power needs to be |
| * increased by (agc_step * 3) |
| */ |
| #define EEPROM_TSSI_BOUND_BG4 0x003a |
| #define EEPROM_TSSI_BOUND_BG4_PLUS2 FIELD16(0x00ff) |
| #define EEPROM_TSSI_BOUND_BG4_PLUS3 FIELD16(0xff00) |
| |
| /* |
| * EEPROM temperature compensation boundaries 802.11BG |
| * PLUS4: If the actual TSSI is above this boundary, tx power needs to be |
| * increased by (agc_step * 4) |
| * AGC_STEP: Temperature compensation step. |
| */ |
| #define EEPROM_TSSI_BOUND_BG5 0x003b |
| #define EEPROM_TSSI_BOUND_BG5_PLUS4 FIELD16(0x00ff) |
| #define EEPROM_TSSI_BOUND_BG5_AGC_STEP FIELD16(0xff00) |
| |
| /* |
| * EEPROM TXPOWER 802.11A |
| */ |
| #define EEPROM_TXPOWER_A1 0x003c |
| #define EEPROM_TXPOWER_A2 0x0053 |
| #define EEPROM_TXPOWER_A_SIZE 6 |
| #define EEPROM_TXPOWER_A_1 FIELD16(0x00ff) |
| #define EEPROM_TXPOWER_A_2 FIELD16(0xff00) |
| |
| /* |
| * EEPROM temperature compensation boundaries 802.11A |
| * MINUS4: If the actual TSSI is below this boundary, tx power needs to be |
| * reduced by (agc_step * -4) |
| * MINUS3: If the actual TSSI is below this boundary, tx power needs to be |
| * reduced by (agc_step * -3) |
| */ |
| #define EEPROM_TSSI_BOUND_A1 0x006a |
| #define EEPROM_TSSI_BOUND_A1_MINUS4 FIELD16(0x00ff) |
| #define EEPROM_TSSI_BOUND_A1_MINUS3 FIELD16(0xff00) |
| |
| /* |
| * EEPROM temperature compensation boundaries 802.11A |
| * MINUS2: If the actual TSSI is below this boundary, tx power needs to be |
| * reduced by (agc_step * -2) |
| * MINUS1: If the actual TSSI is below this boundary, tx power needs to be |
| * reduced by (agc_step * -1) |
| */ |
| #define EEPROM_TSSI_BOUND_A2 0x006b |
| #define EEPROM_TSSI_BOUND_A2_MINUS2 FIELD16(0x00ff) |
| #define EEPROM_TSSI_BOUND_A2_MINUS1 FIELD16(0xff00) |
| |
| /* |
| * EEPROM temperature compensation boundaries 802.11A |
| * REF: Reference TSSI value, no tx power changes needed |
| * PLUS1: If the actual TSSI is above this boundary, tx power needs to be |
| * increased by (agc_step * 1) |
| */ |
| #define EEPROM_TSSI_BOUND_A3 0x006c |
| #define EEPROM_TSSI_BOUND_A3_REF FIELD16(0x00ff) |
| #define EEPROM_TSSI_BOUND_A3_PLUS1 FIELD16(0xff00) |
| |
| /* |
| * EEPROM temperature compensation boundaries 802.11A |
| * PLUS2: If the actual TSSI is above this boundary, tx power needs to be |
| * increased by (agc_step * 2) |
| * PLUS3: If the actual TSSI is above this boundary, tx power needs to be |
| * increased by (agc_step * 3) |
| */ |
| #define EEPROM_TSSI_BOUND_A4 0x006d |
| #define EEPROM_TSSI_BOUND_A4_PLUS2 FIELD16(0x00ff) |
| #define EEPROM_TSSI_BOUND_A4_PLUS3 FIELD16(0xff00) |
| |
| /* |
| * EEPROM temperature compensation boundaries 802.11A |
| * PLUS4: If the actual TSSI is above this boundary, tx power needs to be |
| * increased by (agc_step * 4) |
| * AGC_STEP: Temperature compensation step. |
| */ |
| #define EEPROM_TSSI_BOUND_A5 0x006e |
| #define EEPROM_TSSI_BOUND_A5_PLUS4 FIELD16(0x00ff) |
| #define EEPROM_TSSI_BOUND_A5_AGC_STEP FIELD16(0xff00) |
| |
| /* |
| * EEPROM TXPOWER by rate: tx power per tx rate for HT20 mode |
| */ |
| #define EEPROM_TXPOWER_BYRATE 0x006f |
| #define EEPROM_TXPOWER_BYRATE_SIZE 9 |
| |
| #define EEPROM_TXPOWER_BYRATE_RATE0 FIELD16(0x000f) |
| #define EEPROM_TXPOWER_BYRATE_RATE1 FIELD16(0x00f0) |
| #define EEPROM_TXPOWER_BYRATE_RATE2 FIELD16(0x0f00) |
| #define EEPROM_TXPOWER_BYRATE_RATE3 FIELD16(0xf000) |
| |
| /* |
| * EEPROM BBP. |
| */ |
| #define EEPROM_BBP_START 0x0078 |
| #define EEPROM_BBP_SIZE 16 |
| #define EEPROM_BBP_VALUE FIELD16(0x00ff) |
| #define EEPROM_BBP_REG_ID FIELD16(0xff00) |
| |
| /* |
| * MCU mailbox commands. |
| */ |
| #define MCU_SLEEP 0x30 |
| #define MCU_WAKEUP 0x31 |
| #define MCU_RADIO_OFF 0x35 |
| #define MCU_CURRENT 0x36 |
| #define MCU_LED 0x50 |
| #define MCU_LED_STRENGTH 0x51 |
| #define MCU_LED_AG_CONF 0x52 |
| #define MCU_LED_ACT_CONF 0x53 |
| #define MCU_LED_LED_POLARITY 0x54 |
| #define MCU_RADAR 0x60 |
| #define MCU_BOOT_SIGNAL 0x72 |
| #define MCU_ANT_SELECT 0X73 |
| #define MCU_BBP_SIGNAL 0x80 |
| #define MCU_POWER_SAVE 0x83 |
| #define MCU_BAND_SELECT 0x91 |
| |
| /* |
| * MCU mailbox tokens |
| */ |
| #define TOKEN_WAKUP 3 |
| |
| /* |
| * DMA descriptor defines. |
| */ |
| #define TXWI_DESC_SIZE (4 * sizeof(__le32)) |
| #define RXWI_DESC_SIZE (4 * sizeof(__le32)) |
| |
| /* |
| * TX WI structure |
| */ |
| |
| /* |
| * Word0 |
| * FRAG: 1 To inform TKIP engine this is a fragment. |
| * MIMO_PS: The remote peer is in dynamic MIMO-PS mode |
| * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs |
| * BW: Channel bandwidth 0:20MHz, 1:40 MHz (for legacy rates this will |
| * duplicate the frame to both channels). |
| * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED |
| * AMPDU: 1: this frame is eligible for AMPDU aggregation, the hw will |
| * aggregate consecutive frames with the same RA and QoS TID. If |
| * a frame A with the same RA and QoS TID but AMPDU=0 is queued |
| * directly after a frame B with AMPDU=1, frame A might still |
| * get aggregated into the AMPDU started by frame B. So, setting |
| * AMPDU to 0 does _not_ necessarily mean the frame is sent as |
| * MPDU, it can still end up in an AMPDU if the previous frame |
| * was tagged as AMPDU. |
| */ |
| #define TXWI_W0_FRAG FIELD32(0x00000001) |
| #define TXWI_W0_MIMO_PS FIELD32(0x00000002) |
| #define TXWI_W0_CF_ACK FIELD32(0x00000004) |
| #define TXWI_W0_TS FIELD32(0x00000008) |
| #define TXWI_W0_AMPDU FIELD32(0x00000010) |
| #define TXWI_W0_MPDU_DENSITY FIELD32(0x000000e0) |
| #define TXWI_W0_TX_OP FIELD32(0x00000300) |
| #define TXWI_W0_MCS FIELD32(0x007f0000) |
| #define TXWI_W0_BW FIELD32(0x00800000) |
| #define TXWI_W0_SHORT_GI FIELD32(0x01000000) |
| #define TXWI_W0_STBC FIELD32(0x06000000) |
| #define TXWI_W0_IFS FIELD32(0x08000000) |
| #define TXWI_W0_PHYMODE FIELD32(0xc0000000) |
| |
| /* |
| * Word1 |
| * ACK: 0: No Ack needed, 1: Ack needed |
| * NSEQ: 0: Don't assign hw sequence number, 1: Assign hw sequence number |
| * BW_WIN_SIZE: BA windows size of the recipient |
| * WIRELESS_CLI_ID: Client ID for WCID table access |
| * MPDU_TOTAL_BYTE_COUNT: Length of 802.11 frame |
| * PACKETID: Will be latched into the TX_STA_FIFO register once the according |
| * frame was processed. If multiple frames are aggregated together |
| * (AMPDU==1) the reported tx status will always contain the packet |
| * id of the first frame. 0: Don't report tx status for this frame. |
| * PACKETID_QUEUE: Part of PACKETID, This is the queue index (0-3) |
| * PACKETID_ENTRY: Part of PACKETID, THis is the queue entry index (1-3) |
| * This identification number is calculated by ((idx % 3) + 1). |
| * The (+1) is required to prevent PACKETID to become 0. |
| */ |
| #define TXWI_W1_ACK FIELD32(0x00000001) |
| #define TXWI_W1_NSEQ FIELD32(0x00000002) |
| #define TXWI_W1_BW_WIN_SIZE FIELD32(0x000000fc) |
| #define TXWI_W1_WIRELESS_CLI_ID FIELD32(0x0000ff00) |
| #define TXWI_W1_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) |
| #define TXWI_W1_PACKETID FIELD32(0xf0000000) |
| #define TXWI_W1_PACKETID_QUEUE FIELD32(0x30000000) |
| #define TXWI_W1_PACKETID_ENTRY FIELD32(0xc0000000) |
| |
| /* |
| * Word2 |
| */ |
| #define TXWI_W2_IV FIELD32(0xffffffff) |
| |
| /* |
| * Word3 |
| */ |
| #define TXWI_W3_EIV FIELD32(0xffffffff) |
| |
| /* |
| * RX WI structure |
| */ |
| |
| /* |
| * Word0 |
| */ |
| #define RXWI_W0_WIRELESS_CLI_ID FIELD32(0x000000ff) |
| #define RXWI_W0_KEY_INDEX FIELD32(0x00000300) |
| #define RXWI_W0_BSSID FIELD32(0x00001c00) |
| #define RXWI_W0_UDF FIELD32(0x0000e000) |
| #define RXWI_W0_MPDU_TOTAL_BYTE_COUNT FIELD32(0x0fff0000) |
| #define RXWI_W0_TID FIELD32(0xf0000000) |
| |
| /* |
| * Word1 |
| */ |
| #define RXWI_W1_FRAG FIELD32(0x0000000f) |
| #define RXWI_W1_SEQUENCE FIELD32(0x0000fff0) |
| #define RXWI_W1_MCS FIELD32(0x007f0000) |
| #define RXWI_W1_BW FIELD32(0x00800000) |
| #define RXWI_W1_SHORT_GI FIELD32(0x01000000) |
| #define RXWI_W1_STBC FIELD32(0x06000000) |
| #define RXWI_W1_PHYMODE FIELD32(0xc0000000) |
| |
| /* |
| * Word2 |
| */ |
| #define RXWI_W2_RSSI0 FIELD32(0x000000ff) |
| #define RXWI_W2_RSSI1 FIELD32(0x0000ff00) |
| #define RXWI_W2_RSSI2 FIELD32(0x00ff0000) |
| |
| /* |
| * Word3 |
| */ |
| #define RXWI_W3_SNR0 FIELD32(0x000000ff) |
| #define RXWI_W3_SNR1 FIELD32(0x0000ff00) |
| |
| /* |
| * Macros for converting txpower from EEPROM to mac80211 value |
| * and from mac80211 value to register value. |
| */ |
| #define MIN_G_TXPOWER 0 |
| #define MIN_A_TXPOWER -7 |
| #define MAX_G_TXPOWER 31 |
| #define MAX_A_TXPOWER 15 |
| #define DEFAULT_TXPOWER 5 |
| |
| #define TXPOWER_G_FROM_DEV(__txpower) \ |
| ((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) |
| |
| #define TXPOWER_G_TO_DEV(__txpower) \ |
| clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER) |
| |
| #define TXPOWER_A_FROM_DEV(__txpower) \ |
| ((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower) |
| |
| #define TXPOWER_A_TO_DEV(__txpower) \ |
| clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER) |
| |
| /* |
| * Board's maximun TX power limitation |
| */ |
| #define EIRP_MAX_TX_POWER_LIMIT 0x50 |
| |
| #endif /* RT2800_H */ |