[PATCH] PCI: irq.c: trivial printk and DBG updates
Updated printk and DBG with appropriate KERN_*.
Signed-off-by: Daniel Marjamäki <daniel.marjamaki@comhem.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index ee8e016..e715aa9 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -78,7 +78,7 @@
for (i=0; i < rt->size; i++)
sum += addr[i];
if (!sum) {
- DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+ DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
return rt;
}
return NULL;
@@ -128,7 +128,7 @@
#ifdef DEBUG
{
int j;
- DBG("%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
+ DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot);
for(j=0; j<4; j++)
DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap);
DBG("\n");
@@ -160,10 +160,10 @@
return;
eisa_irq_mask |= (1 << irq);
- printk("PCI: setting IRQ %u as level-triggered\n", irq);
+ printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq);
val = inb(port);
if (!(val & mask)) {
- DBG(" -> edge");
+ DBG(KERN_DEBUG " -> edge");
outb(val | mask, port);
}
}
@@ -677,11 +677,11 @@
{
case PCI_DEVICE_ID_AL_M1533:
case PCI_DEVICE_ID_AL_M1563:
- printk("PCI: Using ALI IRQ Router\n");
- r->name = "ALI";
- r->get = pirq_ali_get;
- r->set = pirq_ali_set;
- return 1;
+ printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
+ r->name = "ALI";
+ r->get = pirq_ali_get;
+ r->set = pirq_ali_set;
+ return 1;
}
return 0;
}
@@ -749,12 +749,13 @@
r->get = NULL;
r->set = NULL;
- DBG("PCI: Attempting to find IRQ router for %04x:%04x\n",
+ DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for %04x:%04x\n",
rt->rtr_vendor, rt->rtr_device);
pirq_router_dev = pci_find_slot(rt->rtr_bus, rt->rtr_devfn);
if (!pirq_router_dev) {
- DBG("PCI: Interrupt router not found at %02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
+ DBG(KERN_DEBUG "PCI: Interrupt router not found at "
+ "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
return;
}
@@ -799,7 +800,7 @@
/* Find IRQ pin */
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (!pin) {
- DBG(" -> no interrupt pin\n");
+ DBG(KERN_DEBUG " -> no interrupt pin\n");
return 0;
}
pin = pin - 1;
@@ -809,16 +810,16 @@
if (!pirq_table)
return 0;
- DBG("IRQ for %s[%c]", pci_name(dev), 'A' + pin);
+ DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
info = pirq_get_info(dev);
if (!info) {
- DBG(" -> not found in routing table\n");
+ DBG(" -> not found in routing table\n" KERN_DEBUG);
return 0;
}
pirq = info->irq[pin].link;
mask = info->irq[pin].bitmap;
if (!pirq) {
- DBG(" -> not routed\n");
+ DBG(" -> not routed\n" KERN_DEBUG);
return 0;
}
DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
@@ -848,7 +849,10 @@
newirq = dev->irq;
if (newirq && !((1 << newirq) & mask)) {
if ( pci_probe & PCI_USE_PIRQ_MASK) newirq = 0;
- else printk(KERN_WARNING "PCI: IRQ %i for device %s doesn't match PIRQ mask - try pci=usepirqmask\n", newirq, pci_name(dev));
+ else printk("\n" KERN_WARNING
+ "PCI: IRQ %i for device %s doesn't match PIRQ mask "
+ "- try pci=usepirqmask\n" KERN_DEBUG, newirq,
+ pci_name(dev));
}
if (!newirq && assign) {
for (i = 0; i < 16; i++) {
@@ -923,14 +927,14 @@
struct pci_dev *dev = NULL;
u8 pin;
- DBG("PCI: IRQ fixup\n");
+ DBG(KERN_DEBUG "PCI: IRQ fixup\n");
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
/*
* If the BIOS has set an out of range IRQ number, just ignore it.
* Also keep track of which IRQ's are already in use.
*/
if (dev->irq >= 16) {
- DBG("%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
+ DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
dev->irq = 0;
}
/* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
@@ -1039,7 +1043,7 @@
static int __init pcibios_irq_init(void)
{
- DBG("PCI: IRQ init\n");
+ DBG(KERN_DEBUG "PCI: IRQ init\n");
if (pcibios_enable_irq || raw_pci_ops == NULL)
return 0;