| /* -------------------------------------------------------------------- */ |
| /* voyagergx.h */ |
| /* -------------------------------------------------------------------- */ |
| /* This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| Copyright 2003 (c) Lineo uSolutions,Inc. |
| */ |
| /* -------------------------------------------------------------------- */ |
| |
| #ifndef _VOYAGER_GX_REG_H |
| #define _VOYAGER_GX_REG_H |
| |
| #define VOYAGER_BASE 0xb3e00000 |
| #define VOYAGER_USBH_BASE (0x40000 + VOYAGER_BASE) |
| #define VOYAGER_UART_BASE (0x30000 + VOYAGER_BASE) |
| #define VOYAGER_AC97_BASE (0xa0000 + VOYAGER_BASE) |
| |
| #define VOYAGER_IRQ_NUM 32 |
| #define VOYAGER_IRQ_BASE 50 |
| #define VOYAGER_USBH_IRQ VOYAGER_IRQ_BASE + 6 |
| #define VOYAGER_8051_IRQ VOYAGER_IRQ_BASE + 10 |
| #define VOYAGER_UART0_IRQ VOYAGER_IRQ_BASE + 12 |
| #define VOYAGER_UART1_IRQ VOYAGER_IRQ_BASE + 13 |
| #define VOYAGER_AC97_IRQ VOYAGER_IRQ_BASE + 17 |
| |
| /* ----- MISC controle register ------------------------------ */ |
| #define MISC_CTRL (0x000004 + VOYAGER_BASE) |
| #define MISC_CTRL_USBCLK_48 (3 << 28) |
| #define MISC_CTRL_USBCLK_96 (2 << 28) |
| #define MISC_CTRL_USBCLK_CRYSTAL (1 << 28) |
| |
| /* ----- GPIO[31:0] register --------------------------------- */ |
| #define GPIO_MUX_LOW (0x000008 + VOYAGER_BASE) |
| #define GPIO_MUX_LOW_AC97 0x1F000000 |
| #define GPIO_MUX_LOW_8051 0x0000ffff |
| #define GPIO_MUX_LOW_PWM (1 << 29) |
| |
| /* ----- GPIO[63:32] register --------------------------------- */ |
| #define GPIO_MUX_HIGH (0x00000C + VOYAGER_BASE) |
| |
| /* ----- DRAM controle register ------------------------------- */ |
| #define DRAM_CTRL (0x000010 + VOYAGER_BASE) |
| #define DRAM_CTRL_EMBEDDED (1 << 31) |
| #define DRAM_CTRL_CPU_BURST_1 (0 << 28) |
| #define DRAM_CTRL_CPU_BURST_2 (1 << 28) |
| #define DRAM_CTRL_CPU_BURST_4 (2 << 28) |
| #define DRAM_CTRL_CPU_BURST_8 (3 << 28) |
| #define DRAM_CTRL_CPU_CAS_LATENCY (1 << 27) |
| #define DRAM_CTRL_CPU_SIZE_2 (0 << 24) |
| #define DRAM_CTRL_CPU_SIZE_4 (1 << 24) |
| #define DRAM_CTRL_CPU_SIZE_64 (4 << 24) |
| #define DRAM_CTRL_CPU_SIZE_32 (5 << 24) |
| #define DRAM_CTRL_CPU_SIZE_16 (6 << 24) |
| #define DRAM_CTRL_CPU_SIZE_8 (7 << 24) |
| #define DRAM_CTRL_CPU_COLUMN_SIZE_1024 (0 << 22) |
| #define DRAM_CTRL_CPU_COLUMN_SIZE_512 (2 << 22) |
| #define DRAM_CTRL_CPU_COLUMN_SIZE_256 (3 << 22) |
| #define DRAM_CTRL_CPU_ACTIVE_PRECHARGE (1 << 21) |
| #define DRAM_CTRL_CPU_RESET (1 << 20) |
| #define DRAM_CTRL_CPU_BANKS (1 << 19) |
| #define DRAM_CTRL_CPU_WRITE_PRECHARGE (1 << 18) |
| #define DRAM_CTRL_BLOCK_WRITE (1 << 17) |
| #define DRAM_CTRL_REFRESH_COMMAND (1 << 16) |
| #define DRAM_CTRL_SIZE_4 (0 << 13) |
| #define DRAM_CTRL_SIZE_8 (1 << 13) |
| #define DRAM_CTRL_SIZE_16 (2 << 13) |
| #define DRAM_CTRL_SIZE_32 (3 << 13) |
| #define DRAM_CTRL_SIZE_64 (4 << 13) |
| #define DRAM_CTRL_SIZE_2 (5 << 13) |
| #define DRAM_CTRL_COLUMN_SIZE_256 (0 << 11) |
| #define DRAM_CTRL_COLUMN_SIZE_512 (2 << 11) |
| #define DRAM_CTRL_COLUMN_SIZE_1024 (3 << 11) |
| #define DRAM_CTRL_BLOCK_WRITE_TIME (1 << 10) |
| #define DRAM_CTRL_BLOCK_WRITE_PRECHARGE (1 << 9) |
| #define DRAM_CTRL_ACTIVE_PRECHARGE (1 << 8) |
| #define DRAM_CTRL_RESET (1 << 7) |
| #define DRAM_CTRL_REMAIN_ACTIVE (1 << 6) |
| #define DRAM_CTRL_BANKS (1 << 1) |
| #define DRAM_CTRL_WRITE_PRECHARGE (1 << 0) |
| |
| /* ----- Arvitration control register -------------------------- */ |
| #define ARBITRATION_CTRL (0x000014 + VOYAGER_BASE) |
| #define ARBITRATION_CTRL_CPUMEM (1 << 29) |
| #define ARBITRATION_CTRL_INTMEM (1 << 28) |
| #define ARBITRATION_CTRL_USB_OFF (0 << 24) |
| #define ARBITRATION_CTRL_USB_PRIORITY_1 (1 << 24) |
| #define ARBITRATION_CTRL_USB_PRIORITY_2 (2 << 24) |
| #define ARBITRATION_CTRL_USB_PRIORITY_3 (3 << 24) |
| #define ARBITRATION_CTRL_USB_PRIORITY_4 (4 << 24) |
| #define ARBITRATION_CTRL_USB_PRIORITY_5 (5 << 24) |
| #define ARBITRATION_CTRL_USB_PRIORITY_6 (6 << 24) |
| #define ARBITRATION_CTRL_USB_PRIORITY_7 (7 << 24) |
| #define ARBITRATION_CTRL_PANEL_OFF (0 << 20) |
| #define ARBITRATION_CTRL_PANEL_PRIORITY_1 (1 << 20) |
| #define ARBITRATION_CTRL_PANEL_PRIORITY_2 (2 << 20) |
| #define ARBITRATION_CTRL_PANEL_PRIORITY_3 (3 << 20) |
| #define ARBITRATION_CTRL_PANEL_PRIORITY_4 (4 << 20) |
| #define ARBITRATION_CTRL_PANEL_PRIORITY_5 (5 << 20) |
| #define ARBITRATION_CTRL_PANEL_PRIORITY_6 (6 << 20) |
| #define ARBITRATION_CTRL_PANEL_PRIORITY_7 (7 << 20) |
| #define ARBITRATION_CTRL_ZVPORT_OFF (0 << 16) |
| #define ARBITRATION_CTRL_ZVPORTL_PRIORITY_1 (1 << 16) |
| #define ARBITRATION_CTRL_ZVPORTL_PRIORITY_2 (2 << 16) |
| #define ARBITRATION_CTRL_ZVPORTL_PRIORITY_3 (3 << 16) |
| #define ARBITRATION_CTRL_ZVPORTL_PRIORITY_4 (4 << 16) |
| #define ARBITRATION_CTRL_ZVPORTL_PRIORITY_5 (5 << 16) |
| #define ARBITRATION_CTRL_ZVPORTL_PRIORITY_6 (6 << 16) |
| #define ARBITRATION_CTRL_ZVPORTL_PRIORITY_7 (7 << 16) |
| #define ARBITRATION_CTRL_CMD_INTPR_OFF (0 << 12) |
| #define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_1 (1 << 12) |
| #define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_2 (2 << 12) |
| #define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_3 (3 << 12) |
| #define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_4 (4 << 12) |
| #define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_5 (5 << 12) |
| #define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_6 (6 << 12) |
| #define ARBITRATION_CTRL_CMD_INTPR_PRIORITY_7 (7 << 12) |
| #define ARBITRATION_CTRL_DMA_OFF (0 << 8) |
| #define ARBITRATION_CTRL_DMA_PRIORITY_1 (1 << 8) |
| #define ARBITRATION_CTRL_DMA_PRIORITY_2 (2 << 8) |
| #define ARBITRATION_CTRL_DMA_PRIORITY_3 (3 << 8) |
| #define ARBITRATION_CTRL_DMA_PRIORITY_4 (4 << 8) |
| #define ARBITRATION_CTRL_DMA_PRIORITY_5 (5 << 8) |
| #define ARBITRATION_CTRL_DMA_PRIORITY_6 (6 << 8) |
| #define ARBITRATION_CTRL_DMA_PRIORITY_7 (7 << 8) |
| #define ARBITRATION_CTRL_VIDEO_OFF (0 << 4) |
| #define ARBITRATION_CTRL_VIDEO_PRIORITY_1 (1 << 4) |
| #define ARBITRATION_CTRL_VIDEO_PRIORITY_2 (2 << 4) |
| #define ARBITRATION_CTRL_VIDEO_PRIORITY_3 (3 << 4) |
| #define ARBITRATION_CTRL_VIDEO_PRIORITY_4 (4 << 4) |
| #define ARBITRATION_CTRL_VIDEO_PRIORITY_5 (5 << 4) |
| #define ARBITRATION_CTRL_VIDEO_PRIORITY_6 (6 << 4) |
| #define ARBITRATION_CTRL_VIDEO_PRIORITY_7 (7 << 4) |
| #define ARBITRATION_CTRL_CRT_OFF (0 << 0) |
| #define ARBITRATION_CTRL_CRT_PRIORITY_1 (1 << 0) |
| #define ARBITRATION_CTRL_CRT_PRIORITY_2 (2 << 0) |
| #define ARBITRATION_CTRL_CRT_PRIORITY_3 (3 << 0) |
| #define ARBITRATION_CTRL_CRT_PRIORITY_4 (4 << 0) |
| #define ARBITRATION_CTRL_CRT_PRIORITY_5 (5 << 0) |
| #define ARBITRATION_CTRL_CRT_PRIORITY_6 (6 << 0) |
| #define ARBITRATION_CTRL_CRT_PRIORITY_7 (7 << 0) |
| |
| /* ----- Command list status register -------------------------- */ |
| #define CMD_INTPR_STATUS (0x000024 + VOYAGER_BASE) |
| |
| /* ----- Interrupt status register ----------------------------- */ |
| #define INT_STATUS (0x00002c + VOYAGER_BASE) |
| #define INT_STATUS_UH (1 << 6) |
| #define INT_STATUS_MC (1 << 10) |
| #define INT_STATUS_U0 (1 << 12) |
| #define INT_STATUS_U1 (1 << 13) |
| #define INT_STATUS_AC (1 << 17) |
| |
| /* ----- Interrupt mask register ------------------------------ */ |
| #define VOYAGER_INT_MASK (0x000030 + VOYAGER_BASE) |
| #define VOYAGER_INT_MASK_AC (1 << 17) |
| |
| /* ----- Current Gate register ---------------------------------*/ |
| #define CURRENT_GATE (0x000038 + VOYAGER_BASE) |
| |
| /* ----- Power mode 0 gate register --------------------------- */ |
| #define POWER_MODE0_GATE (0x000040 + VOYAGER_BASE) |
| #define POWER_MODE0_GATE_G (1 << 6) |
| #define POWER_MODE0_GATE_U0 (1 << 7) |
| #define POWER_MODE0_GATE_U1 (1 << 8) |
| #define POWER_MODE0_GATE_UH (1 << 11) |
| #define POWER_MODE0_GATE_AC (1 << 18) |
| |
| /* ----- Power mode 1 gate register --------------------------- */ |
| #define POWER_MODE1_GATE (0x000048 + VOYAGER_BASE) |
| #define POWER_MODE1_GATE_G (1 << 6) |
| #define POWER_MODE1_GATE_U0 (1 << 7) |
| #define POWER_MODE1_GATE_U1 (1 << 8) |
| #define POWER_MODE1_GATE_UH (1 << 11) |
| #define POWER_MODE1_GATE_AC (1 << 18) |
| |
| /* ----- Power mode 0 clock register -------------------------- */ |
| #define POWER_MODE0_CLOCK (0x000044 + VOYAGER_BASE) |
| |
| /* ----- Power mode 1 clock register -------------------------- */ |
| #define POWER_MODE1_CLOCK (0x00004C + VOYAGER_BASE) |
| |
| /* ----- Power mode controll register ------------------------- */ |
| #define POWER_MODE_CTRL (0x000054 + VOYAGER_BASE) |
| |
| /* ----- Miscellaneous Timing register ------------------------ */ |
| #define SYSTEM_DRAM_CTRL (0x000068 + VOYAGER_BASE) |
| |
| /* ----- PWM register ------------------------------------------*/ |
| #define PWM_0 (0x010020 + VOYAGER_BASE) |
| #define PWM_0_HC(x) (((x)&0x0fff)<<20) |
| #define PWM_0_LC(x) (((x)&0x0fff)<<8 ) |
| #define PWM_0_CLK_DEV(x) (((x)&0x000f)<<4 ) |
| #define PWM_0_EN (1<<0) |
| |
| /* ----- I2C register ----------------------------------------- */ |
| #define I2C_BYTECOUNT (0x010040 + VOYAGER_BASE) |
| #define I2C_CONTROL (0x010041 + VOYAGER_BASE) |
| #define I2C_STATUS (0x010042 + VOYAGER_BASE) |
| #define I2C_RESET (0x010042 + VOYAGER_BASE) |
| #define I2C_SADDRESS (0x010043 + VOYAGER_BASE) |
| #define I2C_DATA (0x010044 + VOYAGER_BASE) |
| |
| /* ----- Controle register bits ----------------------------------------- */ |
| #define I2C_CONTROL_E (1 << 0) |
| #define I2C_CONTROL_MODE (1 << 1) |
| #define I2C_CONTROL_STATUS (1 << 2) |
| #define I2C_CONTROL_INT (1 << 4) |
| #define I2C_CONTROL_INTACK (1 << 5) |
| #define I2C_CONTROL_REPEAT (1 << 6) |
| |
| /* ----- Status register bits ----------------------------------------- */ |
| #define I2C_STATUS_BUSY (1 << 0) |
| #define I2C_STATUS_ACK (1 << 1) |
| #define I2C_STATUS_ERROR (1 << 2) |
| #define I2C_STATUS_COMPLETE (1 << 3) |
| |
| /* ----- Reset register ---------------------------------------------- */ |
| #define I2C_RESET_ERROR (1 << 2) |
| |
| /* ----- transmission frequencies ------------------------------------- */ |
| #define I2C_SADDRESS_SELECT (1 << 0) |
| |
| /* ----- Display Controll register ----------------------------------------- */ |
| #define PANEL_DISPLAY_CTRL (0x080000 + VOYAGER_BASE) |
| #define PANEL_DISPLAY_CTRL_BIAS (1<<26) |
| #define PANEL_PAN_CTRL (0x080004 + VOYAGER_BASE) |
| #define PANEL_COLOR_KEY (0x080008 + VOYAGER_BASE) |
| #define PANEL_FB_ADDRESS (0x08000C + VOYAGER_BASE) |
| #define PANEL_FB_WIDTH (0x080010 + VOYAGER_BASE) |
| #define PANEL_WINDOW_WIDTH (0x080014 + VOYAGER_BASE) |
| #define PANEL_WINDOW_HEIGHT (0x080018 + VOYAGER_BASE) |
| #define PANEL_PLANE_TL (0x08001C + VOYAGER_BASE) |
| #define PANEL_PLANE_BR (0x080020 + VOYAGER_BASE) |
| #define PANEL_HORIZONTAL_TOTAL (0x080024 + VOYAGER_BASE) |
| #define PANEL_HORIZONTAL_SYNC (0x080028 + VOYAGER_BASE) |
| #define PANEL_VERTICAL_TOTAL (0x08002C + VOYAGER_BASE) |
| #define PANEL_VERTICAL_SYNC (0x080030 + VOYAGER_BASE) |
| #define PANEL_CURRENT_LINE (0x080034 + VOYAGER_BASE) |
| #define VIDEO_DISPLAY_CTRL (0x080040 + VOYAGER_BASE) |
| #define VIDEO_FB_0_ADDRESS (0x080044 + VOYAGER_BASE) |
| #define VIDEO_FB_WIDTH (0x080048 + VOYAGER_BASE) |
| #define VIDEO_FB_0_LAST_ADDRESS (0x08004C + VOYAGER_BASE) |
| #define VIDEO_PLANE_TL (0x080050 + VOYAGER_BASE) |
| #define VIDEO_PLANE_BR (0x080054 + VOYAGER_BASE) |
| #define VIDEO_SCALE (0x080058 + VOYAGER_BASE) |
| #define VIDEO_INITIAL_SCALE (0x08005C + VOYAGER_BASE) |
| #define VIDEO_YUV_CONSTANTS (0x080060 + VOYAGER_BASE) |
| #define VIDEO_FB_1_ADDRESS (0x080064 + VOYAGER_BASE) |
| #define VIDEO_FB_1_LAST_ADDRESS (0x080068 + VOYAGER_BASE) |
| #define VIDEO_ALPHA_DISPLAY_CTRL (0x080080 + VOYAGER_BASE) |
| #define VIDEO_ALPHA_FB_ADDRESS (0x080084 + VOYAGER_BASE) |
| #define VIDEO_ALPHA_FB_WIDTH (0x080088 + VOYAGER_BASE) |
| #define VIDEO_ALPHA_FB_LAST_ADDRESS (0x08008C + VOYAGER_BASE) |
| #define VIDEO_ALPHA_PLANE_TL (0x080090 + VOYAGER_BASE) |
| #define VIDEO_ALPHA_PLANE_BR (0x080094 + VOYAGER_BASE) |
| #define VIDEO_ALPHA_SCALE (0x080098 + VOYAGER_BASE) |
| #define VIDEO_ALPHA_INITIAL_SCALE (0x08009C + VOYAGER_BASE) |
| #define VIDEO_ALPHA_CHROMA_KEY (0x0800A0 + VOYAGER_BASE) |
| #define PANEL_HWC_ADDRESS (0x0800F0 + VOYAGER_BASE) |
| #define PANEL_HWC_LOCATION (0x0800F4 + VOYAGER_BASE) |
| #define PANEL_HWC_COLOR_12 (0x0800F8 + VOYAGER_BASE) |
| #define PANEL_HWC_COLOR_3 (0x0800FC + VOYAGER_BASE) |
| #define ALPHA_DISPLAY_CTRL (0x080100 + VOYAGER_BASE) |
| #define ALPHA_FB_ADDRESS (0x080104 + VOYAGER_BASE) |
| #define ALPHA_FB_WIDTH (0x080108 + VOYAGER_BASE) |
| #define ALPHA_PLANE_TL (0x08010C + VOYAGER_BASE) |
| #define ALPHA_PLANE_BR (0x080110 + VOYAGER_BASE) |
| #define ALPHA_CHROMA_KEY (0x080114 + VOYAGER_BASE) |
| #define CRT_DISPLAY_CTRL (0x080200 + VOYAGER_BASE) |
| #define CRT_FB_ADDRESS (0x080204 + VOYAGER_BASE) |
| #define CRT_FB_WIDTH (0x080208 + VOYAGER_BASE) |
| #define CRT_HORIZONTAL_TOTAL (0x08020C + VOYAGER_BASE) |
| #define CRT_HORIZONTAL_SYNC (0x080210 + VOYAGER_BASE) |
| #define CRT_VERTICAL_TOTAL (0x080214 + VOYAGER_BASE) |
| #define CRT_VERTICAL_SYNC (0x080218 + VOYAGER_BASE) |
| #define CRT_SIGNATURE_ANALYZER (0x08021C + VOYAGER_BASE) |
| #define CRT_CURRENT_LINE (0x080220 + VOYAGER_BASE) |
| #define CRT_MONITOR_DETECT (0x080224 + VOYAGER_BASE) |
| #define CRT_HWC_ADDRESS (0x080230 + VOYAGER_BASE) |
| #define CRT_HWC_LOCATION (0x080234 + VOYAGER_BASE) |
| #define CRT_HWC_COLOR_12 (0x080238 + VOYAGER_BASE) |
| #define CRT_HWC_COLOR_3 (0x08023C + VOYAGER_BASE) |
| #define CRT_PALETTE_RAM (0x080400 + VOYAGER_BASE) |
| #define PANEL_PALETTE_RAM (0x080800 + VOYAGER_BASE) |
| #define VIDEO_PALETTE_RAM (0x080C00 + VOYAGER_BASE) |
| |
| /* ----- 8051 Controle register ----------------------------------------- */ |
| #define VOYAGER_8051_BASE (0x000c0000 + VOYAGER_BASE) |
| #define VOYAGER_8051_RESET (0x000b0000 + VOYAGER_BASE) |
| #define VOYAGER_8051_SELECT (0x000b0004 + VOYAGER_BASE) |
| #define VOYAGER_8051_CPU_INT (0x000b000c + VOYAGER_BASE) |
| |
| /* ----- AC97 Controle register ----------------------------------------- */ |
| #define AC97_TX_SLOT0 (0x00000000 + VOYAGER_AC97_BASE) |
| #define AC97_CONTROL_STATUS (0x00000080 + VOYAGER_AC97_BASE) |
| #define AC97C_READ (1 << 19) |
| #define AC97C_WD_BIT (1 << 2) |
| #define AC97C_INDEX_MASK 0x7f |
| |
| /* arch/sh/cchips/voyagergx/consistent.c */ |
| void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); |
| int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t); |
| |
| #endif /* _VOYAGER_GX_REG_H */ |