[ALSA] hda-codec - Fix BIOS auto-configuration
Modules: HDA Codec driver,HDA generic driver
- Fix autoconfig speaker/hp detection
Now it allows multiple speaker pins (e.g. Dell laptops have such config)
- Use speaker or hp pins if no line-outs are available
This fixes the silence output on recent Dell laptops with STAC9200
(ALSA bug#1843)
- Fix analog/realtek/sigmatel autoconfig parser
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index fc91256..b42dff7 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1899,6 +1899,13 @@
if (mout->hp_nid)
/* headphone out will just decode front left/right (stereo) */
snd_hda_codec_setup_stream(codec, mout->hp_nid, stream_tag, 0, format);
+ /* extra outputs copied from front */
+ for (i = 0; i < ARRAY_SIZE(mout->extra_out_nid); i++)
+ if (mout->extra_out_nid[i])
+ snd_hda_codec_setup_stream(codec,
+ mout->extra_out_nid[i],
+ stream_tag, 0, format);
+
/* surrounds */
for (i = 1; i < mout->num_dacs; i++) {
if (chs >= (i + 1) * 2) /* independent out */
@@ -1923,6 +1930,11 @@
snd_hda_codec_setup_stream(codec, nids[i], 0, 0, 0);
if (mout->hp_nid)
snd_hda_codec_setup_stream(codec, mout->hp_nid, 0, 0, 0);
+ for (i = 0; i < ARRAY_SIZE(mout->extra_out_nid); i++)
+ if (mout->extra_out_nid[i])
+ snd_hda_codec_setup_stream(codec,
+ mout->extra_out_nid[i],
+ 0, 0, 0);
mutex_lock(&codec->spdif_mutex);
if (mout->dig_out_nid && mout->dig_out_used == HDA_DIG_ANALOG_DUP) {
snd_hda_codec_setup_stream(codec, mout->dig_out_nid, 0, 0, 0);
@@ -1944,13 +1956,29 @@
return 0;
}
-/* parse all pin widgets and store the useful pin nids to cfg */
+/*
+ * Parse all pin widgets and store the useful pin nids to cfg
+ *
+ * The number of line-outs or any primary output is stored in line_outs,
+ * and the corresponding output pins are assigned to line_out_pins[],
+ * in the order of front, rear, CLFE, side, ...
+ *
+ * If more extra outputs (speaker and headphone) are found, the pins are
+ * assisnged to hp_pin and speaker_pins[], respectively. If no line-out jack
+ * is detected, one of speaker of HP pins is assigned as the primary
+ * output, i.e. to line_out_pins[0]. So, line_outs is always positive
+ * if any analog output exists.
+ *
+ * The analog input pins are assigned to input_pins array.
+ * The digital input/output pins are assigned to dig_in_pin and dig_out_pin,
+ * respectively.
+ */
int snd_hda_parse_pin_def_config(struct hda_codec *codec, struct auto_pin_cfg *cfg,
hda_nid_t *ignore_nids)
{
hda_nid_t nid, nid_start;
int i, j, nodes;
- short seq, sequences[4], assoc_line_out;
+ short seq, assoc_line_out, sequences[ARRAY_SIZE(cfg->line_out_pins)];
memset(cfg, 0, sizeof(*cfg));
@@ -1992,7 +2020,10 @@
cfg->line_outs++;
break;
case AC_JACK_SPEAKER:
- cfg->speaker_pin = nid;
+ if (cfg->speaker_outs >= ARRAY_SIZE(cfg->speaker_pins))
+ continue;
+ cfg->speaker_pins[cfg->speaker_outs] = nid;
+ cfg->speaker_outs++;
break;
case AC_JACK_HP_OUT:
cfg->hp_pin = nid;
@@ -2057,6 +2088,46 @@
break;
}
+ /*
+ * debug prints of the parsed results
+ */
+ snd_printd("autoconfig: line_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
+ cfg->line_outs, cfg->line_out_pins[0], cfg->line_out_pins[1],
+ cfg->line_out_pins[2], cfg->line_out_pins[3],
+ cfg->line_out_pins[4]);
+ snd_printd(" speaker_outs=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
+ cfg->speaker_outs, cfg->speaker_pins[0],
+ cfg->speaker_pins[1], cfg->speaker_pins[2],
+ cfg->speaker_pins[3], cfg->speaker_pins[4]);
+ snd_printd(" hp=0x%x, dig_out=0x%x, din_in=0x%x\n",
+ cfg->hp_pin, cfg->dig_out_pin, cfg->dig_in_pin);
+ snd_printd(" inputs: mic=0x%x, fmic=0x%x, line=0x%x, fline=0x%x,"
+ " cd=0x%x, aux=0x%x\n",
+ cfg->input_pins[AUTO_PIN_MIC],
+ cfg->input_pins[AUTO_PIN_FRONT_MIC],
+ cfg->input_pins[AUTO_PIN_LINE],
+ cfg->input_pins[AUTO_PIN_FRONT_LINE],
+ cfg->input_pins[AUTO_PIN_CD],
+ cfg->input_pins[AUTO_PIN_AUX]);
+
+ /*
+ * FIX-UP: if no line-outs are detected, try to use speaker or HP pin
+ * as a primary output
+ */
+ if (! cfg->line_outs) {
+ if (cfg->speaker_outs) {
+ cfg->line_outs = cfg->speaker_outs;
+ memcpy(cfg->line_out_pins, cfg->speaker_pins,
+ sizeof(cfg->speaker_pins));
+ cfg->speaker_outs = 0;
+ memset(cfg->speaker_pins, 0, sizeof(cfg->speaker_pins));
+ } else if (cfg->hp_pin) {
+ cfg->line_outs = 1;
+ cfg->line_out_pins[0] = cfg->hp_pin;
+ cfg->hp_pin = 0;
+ }
+ }
+
return 0;
}
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 548a8b6..14e8aa2 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -135,6 +135,7 @@
int num_dacs; /* # of DACs, must be more than 1 */
hda_nid_t *dac_nids; /* DAC list */
hda_nid_t hp_nid; /* optional DAC for HP, 0 when not exists */
+ hda_nid_t extra_out_nid[3]; /* optional DACs, 0 when not exists */
hda_nid_t dig_out_nid; /* digital out audio widget */
int max_channels; /* currently supported analog channels */
int dig_out_used; /* current usage of digital out (HDA_DIG_XXX) */
@@ -221,7 +222,8 @@
struct auto_pin_cfg {
int line_outs;
hda_nid_t line_out_pins[5]; /* sorted in the order of Front/Surr/CLFE/Side */
- hda_nid_t speaker_pin;
+ int speaker_outs;
+ hda_nid_t speaker_pins[5];
hda_nid_t hp_pin;
hda_nid_t input_pins[AUTO_PIN_LAST];
hda_nid_t dig_out_pin;
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 2b14fa7..7fbe71e 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -786,6 +786,8 @@
static struct hda_board_config ad1986a_cfg_tbl[] = {
{ .modelname = "6stack", .config = AD1986A_6STACK },
{ .modelname = "3stack", .config = AD1986A_3STACK },
+ { .pci_subvendor = 0x10de, .pci_subdevice = 0xcb84,
+ .config = AD1986A_3STACK }, /* ASUS A8N-VM CSM */
{ .modelname = "laptop", .config = AD1986A_LAPTOP },
{ .pci_subvendor = 0x144d, .pci_subdevice = 0xc01e,
.config = AD1986A_LAPTOP }, /* FSC V2060 */
@@ -2253,14 +2255,11 @@
idx = ad1988_pin_idx(pin);
nid = ad1988_idx_to_dac(codec, idx);
- if (! spec->multiout.dac_nids[0]) {
- /* use this as the primary output */
- spec->multiout.dac_nids[0] = nid;
- if (! spec->multiout.num_dacs)
- spec->multiout.num_dacs = 1;
- } else
- /* specify the DAC as the extra output */
+ /* specify the DAC as the extra output */
+ if (! spec->multiout.hp_nid)
spec->multiout.hp_nid = nid;
+ else
+ spec->multiout.extra_out_nid[0] = nid;
/* control HP volume/switch on the output mixer amp */
sprintf(name, "%s Playback Volume", pfx);
if ((err = add_control(spec, AD_CTL_WIDGET_VOL, name,
@@ -2379,7 +2378,7 @@
struct ad198x_spec *spec = codec->spec;
hda_nid_t pin;
- pin = spec->autocfg.speaker_pin;
+ pin = spec->autocfg.speaker_pins[0];
if (pin) /* connect to front */
ad1988_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
pin = spec->autocfg.hp_pin;
@@ -2428,13 +2427,13 @@
return err;
if ((err = ad1988_auto_fill_dac_nids(codec, &spec->autocfg)) < 0)
return err;
- if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
- ! spec->autocfg.hp_pin)
+ if (! spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
if ((err = ad1988_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
- (err = ad1988_auto_create_extra_out(codec, spec->autocfg.speaker_pin,
+ (err = ad1988_auto_create_extra_out(codec,
+ spec->autocfg.speaker_pins[0],
"Speaker")) < 0 ||
- (err = ad1988_auto_create_extra_out(codec, spec->autocfg.speaker_pin,
+ (err = ad1988_auto_create_extra_out(codec, spec->autocfg.hp_pin,
"Headphone")) < 0 ||
(err = ad1988_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
return err;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 1607a1f..de145d1 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2431,14 +2431,11 @@
if (alc880_is_fixed_pin(pin)) {
nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
- if (! spec->multiout.dac_nids[0]) {
- /* use this as the primary output */
- spec->multiout.dac_nids[0] = nid;
- if (! spec->multiout.num_dacs)
- spec->multiout.num_dacs = 1;
- } else
- /* specify the DAC as the extra output */
+ /* specify the DAC as the extra output */
+ if (! spec->multiout.hp_nid)
spec->multiout.hp_nid = nid;
+ else
+ spec->multiout.extra_out_nid[0] = nid;
/* control HP volume/switch on the output mixer amp */
nid = alc880_idx_to_mixer(alc880_fixed_pin_idx(pin));
sprintf(name, "%s Playback Volume", pfx);
@@ -2451,12 +2448,6 @@
return err;
} else if (alc880_is_multi_pin(pin)) {
/* set manual connection */
- if (! spec->multiout.dac_nids[0]) {
- /* use this as the primary output */
- spec->multiout.dac_nids[0] = alc880_idx_to_dac(alc880_multi_pin_idx(pin));
- if (! spec->multiout.num_dacs)
- spec->multiout.num_dacs = 1;
- }
/* we have only a switch on HP-out PIN */
sprintf(name, "%s Playback Switch", pfx);
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
@@ -2540,7 +2531,7 @@
struct alc_spec *spec = codec->spec;
hda_nid_t pin;
- pin = spec->autocfg.speaker_pin;
+ pin = spec->autocfg.speaker_pins[0];
if (pin) /* connect to front */
alc880_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
pin = spec->autocfg.hp_pin;
@@ -2576,15 +2567,15 @@
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
alc880_ignore)) < 0)
return err;
- if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
- ! spec->autocfg.hp_pin)
+ if (! spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
if ((err = alc880_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
(err = alc880_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
- (err = alc880_auto_create_extra_out(spec, spec->autocfg.speaker_pin,
+ (err = alc880_auto_create_extra_out(spec,
+ spec->autocfg.speaker_pins[0],
"Speaker")) < 0 ||
- (err = alc880_auto_create_extra_out(spec, spec->autocfg.speaker_pin,
+ (err = alc880_auto_create_extra_out(spec, spec->autocfg.hp_pin,
"Headphone")) < 0 ||
(err = alc880_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
return err;
@@ -3445,7 +3436,7 @@
return err;
}
- nid = cfg->speaker_pin;
+ nid = cfg->speaker_pins[0];
if (nid) {
err = alc260_add_playback_controls(spec, nid, "Speaker");
if (err < 0)
@@ -3518,7 +3509,7 @@
if (nid)
alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
- nid = spec->autocfg.speaker_pin;
+ nid = spec->autocfg.speaker_pins[0];
if (nid)
alc260_auto_set_output_and_unmute(codec, nid, PIN_OUT, 0);
@@ -4602,7 +4593,7 @@
return err;
}
- nid = cfg->speaker_pin;
+ nid = cfg->speaker_pins[0];
if (nid) {
if (nid == 0x16) {
if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Speaker Playback Volume",
@@ -4612,10 +4603,6 @@
HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
return err;
} else {
- if (! cfg->line_out_pins[0])
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Speaker Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0)
- return err;
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Speaker Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
return err;
@@ -4632,10 +4619,6 @@
HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT))) < 0)
return err;
} else {
- if (! cfg->line_out_pins[0])
- if ((err = add_control(spec, ALC_CTL_WIDGET_VOL, "Headphone Playback Volume",
- HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT))) < 0)
- return err;
if ((err = add_control(spec, ALC_CTL_WIDGET_MUTE, "Headphone Playback Switch",
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT))) < 0)
return err;
@@ -4729,8 +4712,7 @@
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
alc262_ignore)) < 0)
return err;
- if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
- ! spec->autocfg.hp_pin)
+ if (! spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
if ((err = alc262_auto_create_multi_out_ctls(spec, &spec->autocfg)) < 0 ||
(err = alc262_auto_create_analog_input_ctls(spec, &spec->autocfg)) < 0)
@@ -5404,8 +5386,7 @@
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg,
alc861_ignore)) < 0)
return err;
- if (! spec->autocfg.line_outs && ! spec->autocfg.speaker_pin &&
- ! spec->autocfg.hp_pin)
+ if (! spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
if ((err = alc861_auto_fill_dac_nids(spec, &spec->autocfg)) < 0 ||
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 240958d..b56ca40 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -51,6 +51,7 @@
unsigned int line_switch: 1;
unsigned int mic_switch: 1;
unsigned int alt_switch: 1;
+ unsigned int hp_detect: 1;
/* playback */
struct hda_multi_out multiout;
@@ -697,13 +698,7 @@
AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
}
- if (cfg->line_outs)
- spec->multiout.num_dacs = cfg->line_outs;
- else if (cfg->hp_pin) {
- spec->multiout.dac_nids[0] = snd_hda_codec_read(codec, cfg->hp_pin, 0,
- AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
- spec->multiout.num_dacs = 1;
- }
+ spec->multiout.num_dacs = cfg->line_outs;
return 0;
}
@@ -772,11 +767,13 @@
return 0;
wid_caps = get_wcaps(codec, pin);
- if (wid_caps & AC_WCAP_UNSOL_CAP)
+ if (wid_caps & AC_WCAP_UNSOL_CAP) {
/* Enable unsolicited responses on the HP widget */
snd_hda_codec_write(codec, pin, 0,
AC_VERB_SET_UNSOLICITED_ENABLE,
STAC_UNSOL_ENABLE);
+ spec->hp_detect = 1;
+ }
nid = snd_hda_codec_read(codec, pin, 0, AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
for (i = 0; i < cfg->line_outs; i++) {
@@ -810,9 +807,6 @@
for (i = 0; i < AUTO_PIN_LAST; i++) {
int index = -1;
if (cfg->input_pins[i]) {
- /* Enable active pin widget as an input */
- stac92xx_auto_set_pinctl(codec, cfg->input_pins[i], AC_PINCTL_IN_EN);
-
imux->items[imux->num_items].label = auto_pin_cfg_labels[i];
for (j=0; j<spec->num_muxes; j++) {
@@ -861,10 +855,8 @@
if ((err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL)) < 0)
return err;
- if (! spec->autocfg.line_outs && ! spec->autocfg.hp_pin)
+ if (! spec->autocfg.line_outs)
return 0; /* can't find valid pin config */
- stac92xx_auto_init_multi_out(codec);
- stac92xx_auto_init_hp_out(codec);
if ((err = stac92xx_add_dyn_out_pins(codec, &spec->autocfg)) < 0)
return err;
if ((err = stac92xx_auto_fill_dac_nids(codec, &spec->autocfg)) < 0)
@@ -879,14 +871,10 @@
if (spec->multiout.max_channels > 2)
spec->surr_switch = 1;
- if (spec->autocfg.dig_out_pin) {
+ if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = dig_out;
- stac92xx_auto_set_pinctl(codec, spec->autocfg.dig_out_pin, AC_PINCTL_OUT_EN);
- }
- if (spec->autocfg.dig_in_pin) {
+ if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = dig_in;
- stac92xx_auto_set_pinctl(codec, spec->autocfg.dig_in_pin, AC_PINCTL_IN_EN);
- }
if (spec->kctl_alloc)
spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
@@ -896,6 +884,29 @@
return 1;
}
+/* add playback controls for HP output */
+static int stac9200_auto_create_hp_ctls(struct hda_codec *codec,
+ struct auto_pin_cfg *cfg)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ hda_nid_t pin = cfg->hp_pin;
+ unsigned int wid_caps;
+
+ if (! pin)
+ return 0;
+
+ wid_caps = get_wcaps(codec, pin);
+ if (wid_caps & AC_WCAP_UNSOL_CAP) {
+ /* Enable unsolicited responses on the HP widget */
+ snd_hda_codec_write(codec, pin, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ STAC_UNSOL_ENABLE);
+ spec->hp_detect = 1;
+ }
+
+ return 0;
+}
+
static int stac9200_parse_auto_config(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
@@ -907,14 +918,13 @@
if ((err = stac92xx_auto_create_analog_input_ctls(codec, &spec->autocfg)) < 0)
return err;
- if (spec->autocfg.dig_out_pin) {
+ if ((err = stac9200_auto_create_hp_ctls(codec, &spec->autocfg)) < 0)
+ return err;
+
+ if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = 0x05;
- stac92xx_auto_set_pinctl(codec, spec->autocfg.dig_out_pin, AC_PINCTL_OUT_EN);
- }
- if (spec->autocfg.dig_in_pin) {
+ if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = 0x04;
- stac92xx_auto_set_pinctl(codec, spec->autocfg.dig_in_pin, AC_PINCTL_IN_EN);
- }
if (spec->kctl_alloc)
spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
@@ -927,9 +937,31 @@
static int stac92xx_init(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i;
snd_hda_sequence_write(codec, spec->init);
+ /* set up pins */
+ if (spec->hp_detect) {
+ /* fake event to set up pins */
+ codec->patch_ops.unsol_event(codec, STAC_HP_EVENT << 26);
+ } else {
+ stac92xx_auto_init_multi_out(codec);
+ stac92xx_auto_init_hp_out(codec);
+ }
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ if (cfg->input_pins[i])
+ stac92xx_auto_set_pinctl(codec, cfg->input_pins[i],
+ AC_PINCTL_IN_EN);
+ }
+ if (cfg->dig_out_pin)
+ stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
+ AC_PINCTL_OUT_EN);
+ if (cfg->dig_in_pin)
+ stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
+ AC_PINCTL_IN_EN);
+
return 0;
}