drivers/char/tty_io.c

/*
 *  linux/drivers/char/tty_io.c
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 */

/*
 * 'tty_io.c' gives an orthogonal feeling to tty's, be they consoles
 * or rs-channels. It also implements echoing, cooked mode etc.
 *
 * Kill-line thanks to John T Kohl, who also corrected VMIN = VTIME = 0.
 *
 * Modified by Theodore Ts'o, 9/14/92, to dynamically allocate the
 * tty_struct and tty_queue structures.  Previously there was an array
 * of 256 tty_struct's which was statically allocated, and the
 * tty_queue structures were allocated at boot time.  Both are now
 * dynamically allocated only when the tty is open.
 *
 * Also restructured routines so that there is more of a separation
 * between the high-level tty routines (tty_io.c and tty_ioctl.c) and
 * the low-level tty routines (serial.c, pty.c, console.c).  This
 * makes for cleaner and more compact code.  -TYT, 9/17/92
 *
 * Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
 * which can be dynamically activated and de-activated by the line
 * discipline handling modules (like SLIP).
 *
 * NOTE: pay no attention to the line discipline code (yet); its
 * interface is still subject to change in this version...
 * -- TYT, 1/31/92
 *
 * Added functionality to the OPOST tty handling.  No delays, but all
 * other bits should be there.
 *	-- Nick Holloway <alfie@dcs.warwick.ac.uk>, 27th May 1993.
 *
 * Rewrote canonical mode and added more termios flags.
 * 	-- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94
 *
 * Reorganized FASYNC support so mouse code can share it.
 *	-- ctm@ardi.com, 9Sep95
 *
 * New TIOCLINUX variants added.
 *	-- mj@k332.feld.cvut.cz, 19-Nov-95
 *
 * Restrict vt switching via ioctl()
 *      -- grif@cs.ucr.edu, 5-Dec-95
 *
 * Move console and virtual terminal code to more appropriate files,
 * implement CONFIG_VT and generalize console device interface.
 *	-- Marko Kohtala <Marko.Kohtala@hut.fi>, March 97
 *
 * Rewrote init_dev and release_dev to eliminate races.
 *	-- Bill Hawes <whawes@star.net>, June 97
 *
 * Added devfs support.
 *      -- C. Scott Ananian <cananian@alumni.princeton.edu>, 13-Jan-1998
 *
 * Added support for a Unix98-style ptmx device.
 *      -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
 *
 * Reduced memory usage for older ARM systems
 *      -- Russell King <rmk@arm.linux.org.uk>
 *
 * Move do_SAK() into process context.  Less stack use in devfs functions.
 * alloc_tty_struct() always uses kmalloc()
 *			 -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
 */

#include <linux/types.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/fcntl.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/devpts_fs.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/console.h>
#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/kd.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/seq_file.h>

#include <linux/uaccess.h>
#include <asm/system.h>

#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>

#include <linux/kmod.h>
#include <linux/nsproxy.h>

#undef TTY_DEBUG_HANGUP

#define TTY_PARANOIA_CHECK 1
#define CHECK_TTY_COUNT 1

struct ktermios tty_std_termios = {	/* for the benefit of tty drivers  */
	.c_iflag = ICRNL | IXON,
	.c_oflag = OPOST | ONLCR,
	.c_cflag = B38400 | CS8 | CREAD | HUPCL,
	.c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK |
		   ECHOCTL | ECHOKE | IEXTEN,
	.c_cc = INIT_C_CC,
	.c_ispeed = 38400,
	.c_ospeed = 38400
};

EXPORT_SYMBOL(tty_std_termios);

/* This list gets poked at by procfs and various bits of boot up code. This
   could do with some rationalisation such as pulling the tty proc function
   into this file */

LIST_HEAD(tty_drivers);			/* linked list of tty drivers */

/* Mutex to protect creating and releasing a tty. This is shared with
   vt.c for deeply disgusting hack reasons */
DEFINE_MUTEX(tty_mutex);
EXPORT_SYMBOL(tty_mutex);

#ifdef CONFIG_UNIX98_PTYS
extern struct tty_driver *ptm_driver;	/* Unix98 pty masters; for /dev/ptmx */
static int ptmx_open(struct inode *, struct file *);
#endif

static void initialize_tty_struct(struct tty_struct *tty);

static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
ssize_t redirected_tty_write(struct file *, const char __user *,
							size_t, loff_t *);
static unsigned int tty_poll(struct file *, poll_table *);
static int tty_open(struct inode *, struct file *);
static int tty_release(struct inode *, struct file *);
long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
#ifdef CONFIG_COMPAT
static long tty_compat_ioctl(struct file *file, unsigned int cmd,
				unsigned long arg);
#else
#define tty_compat_ioctl NULL
#endif
static int tty_fasync(int fd, struct file *filp, int on);
static void release_tty(struct tty_struct *tty, int idx);
static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);

/**
 *	alloc_tty_struct	-	allocate a tty object
 *
 *	Return a new empty tty structure. The data fields have not
 *	been initialized in any way but has been zeroed
 *
 *	Locking: none
 */

static struct tty_struct *alloc_tty_struct(void)
{
	return kzalloc(sizeof(struct tty_struct), GFP_KERNEL);
}

static void tty_buffer_free_all(struct tty_struct *);

/**
 *	free_tty_struct		-	free a disused tty
 *	@tty: tty struct to free
 *
 *	Free the write buffers, tty queue and tty memory itself.
 *
 *	Locking: none. Must be called after tty is definitely unused
 */

static inline void free_tty_struct(struct tty_struct *tty)
{
	kfree(tty->write_buf);
	tty_buffer_free_all(tty);
	kfree(tty);
}

#define TTY_NUMBER(tty) ((tty)->index + (tty)->driver->name_base)

/**
 *	tty_name	-	return tty naming
 *	@tty: tty structure
 *	@buf: buffer for output
 *
 *	Convert a tty structure into a name. The name reflects the kernel
 *	naming policy and if udev is in use may not reflect user space
 *
 *	Locking: none
 */

char *tty_name(struct tty_struct *tty, char *buf)
{
	if (!tty) /* Hmm.  NULL pointer.  That's fun. */
		strcpy(buf, "NULL tty");
	else
		strcpy(buf, tty->name);
	return buf;
}

EXPORT_SYMBOL(tty_name);

int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
			      const char *routine)
{
#ifdef TTY_PARANOIA_CHECK
	if (!tty) {
		printk(KERN_WARNING
			"null TTY for (%d:%d) in %s\n",
			imajor(inode), iminor(inode), routine);
		return 1;
	}
	if (tty->magic != TTY_MAGIC) {
		printk(KERN_WARNING
			"bad magic number for tty struct (%d:%d) in %s\n",
			imajor(inode), iminor(inode), routine);
		return 1;
	}
#endif
	return 0;
}

static int check_tty_count(struct tty_struct *tty, const char *routine)
{
#ifdef CHECK_TTY_COUNT
	struct list_head *p;
	int count = 0;

	file_list_lock();
	list_for_each(p, &tty->tty_files) {
		count++;
	}
	file_list_unlock();
	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
	    tty->driver->subtype == PTY_TYPE_SLAVE &&
	    tty->link && tty->link->count)
		count++;
	if (tty->count != count) {
		printk(KERN_WARNING "Warning: dev (%s) tty->count(%d) "
				    "!= #fd's(%d) in %s\n",
		       tty->name, tty->count, count, routine);
		return count;
	}
#endif
	return 0;
}

/*
 * Tty buffer allocation management
 */

/**
 *	tty_buffer_free_all		-	free buffers used by a tty
 *	@tty: tty to free from
 *
 *	Remove all the buffers pending on a tty whether queued with data
 *	or in the free ring. Must be called when the tty is no longer in use
 *
 *	Locking: none
 */

static void tty_buffer_free_all(struct tty_struct *tty)
{
	struct tty_buffer *thead;
	while ((thead = tty->buf.head) != NULL) {
		tty->buf.head = thead->next;
		kfree(thead);
	}
	while ((thead = tty->buf.free) != NULL) {
		tty->buf.free = thead->next;
		kfree(thead);
	}
	tty->buf.tail = NULL;
	tty->buf.memory_used = 0;
}

/**
 *	tty_buffer_init		-	prepare a tty buffer structure
 *	@tty: tty to initialise
 *
 *	Set up the initial state of the buffer management for a tty device.
 *	Must be called before the other tty buffer functions are used.
 *
 *	Locking: none
 */

static void tty_buffer_init(struct tty_struct *tty)
{
	spin_lock_init(&tty->buf.lock);
	tty->buf.head = NULL;
	tty->buf.tail = NULL;
	tty->buf.free = NULL;
	tty->buf.memory_used = 0;
}

/**
 *	tty_buffer_alloc	-	allocate a tty buffer
 *	@tty: tty device
 *	@size: desired size (characters)
 *
 *	Allocate a new tty buffer to hold the desired number of characters.
 *	Return NULL if out of memory or the allocation would exceed the
 *	per device queue
 *
 *	Locking: Caller must hold tty->buf.lock
 */

static struct tty_buffer *tty_buffer_alloc(struct tty_struct *tty, size_t size)
{
	struct tty_buffer *p;

	if (tty->buf.memory_used + size > 65536)
		return NULL;
	p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC);
	if (p == NULL)
		return NULL;
	p->used = 0;
	p->size = size;
	p->next = NULL;
	p->commit = 0;
	p->read = 0;
	p->char_buf_ptr = (char *)(p->data);
	p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
	tty->buf.memory_used += size;
	return p;
}

/**
 *	tty_buffer_free		-	free a tty buffer
 *	@tty: tty owning the buffer
 *	@b: the buffer to free
 *
 *	Free a tty buffer, or add it to the free list according to our
 *	internal strategy
 *
 *	Locking: Caller must hold tty->buf.lock
 */

static void tty_buffer_free(struct tty_struct *tty, struct tty_buffer *b)
{
	/* Dumb strategy for now - should keep some stats */
	tty->buf.memory_used -= b->size;
	WARN_ON(tty->buf.memory_used < 0);

	if (b->size >= 512)
		kfree(b);
	else {
		b->next = tty->buf.free;
		tty->buf.free = b;
	}
}

/**
 *	__tty_buffer_flush		-	flush full tty buffers
 *	@tty: tty to flush
 *
 *	flush all the buffers containing receive data. Caller must
 *	hold the buffer lock and must have ensured no parallel flush to
 *	ldisc is running.
 *
 *	Locking: Caller must hold tty->buf.lock
 */

static void __tty_buffer_flush(struct tty_struct *tty)
{
	struct tty_buffer *thead;

	while ((thead = tty->buf.head) != NULL) {
		tty->buf.head = thead->next;
		tty_buffer_free(tty, thead);
	}
	tty->buf.tail = NULL;
}

/**
 *	tty_buffer_flush		-	flush full tty buffers
 *	@tty: tty to flush
 *
 *	flush all the buffers containing receive data. If the buffer is
 *	being processed by flush_to_ldisc then we defer the processing
 *	to that function
 *
 *	Locking: none
 */

static void tty_buffer_flush(struct tty_struct *tty)
{
	unsigned long flags;
	spin_lock_irqsave(&tty->buf.lock, flags);

	/* If the data is being pushed to the tty layer then we can't
	   process it here. Instead set a flag and the flush_to_ldisc
	   path will process the flush request before it exits */
	if (test_bit(TTY_FLUSHING, &tty->flags)) {
		set_bit(TTY_FLUSHPENDING, &tty->flags);
		spin_unlock_irqrestore(&tty->buf.lock, flags);
		wait_event(tty->read_wait,
				test_bit(TTY_FLUSHPENDING, &tty->flags) == 0);
		return;
	} else
		__tty_buffer_flush(tty);
	spin_unlock_irqrestore(&tty->buf.lock, flags);
}

/**
 *	tty_buffer_find		-	find a free tty buffer
 *	@tty: tty owning the buffer
 *	@size: characters wanted
 *
 *	Locate an existing suitable tty buffer or if we are lacking one then
 *	allocate a new one. We round our buffers off in 256 character chunks
 *	to get better allocation behaviour.
 *
 *	Locking: Caller must hold tty->buf.lock
 */

static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
{
	struct tty_buffer **tbh = &tty->buf.free;
	while ((*tbh) != NULL) {
		struct tty_buffer *t = *tbh;
		if (t->size >= size) {
			*tbh = t->next;
			t->next = NULL;
			t->used = 0;
			t->commit = 0;
			t->read = 0;
			tty->buf.memory_used += t->size;
			return t;
		}
		tbh = &((*tbh)->next);
	}
	/* Round the buffer size out */
	size = (size + 0xFF) & ~0xFF;
	return tty_buffer_alloc(tty, size);
	/* Should possibly check if this fails for the largest buffer we
	   have queued and recycle that ? */
}

/**
 *	tty_buffer_request_room		-	grow tty buffer if needed
 *	@tty: tty structure
 *	@size: size desired
 *
 *	Make at least size bytes of linear space available for the tty
 *	buffer. If we fail return the size we managed to find.
 *
 *	Locking: Takes tty->buf.lock
 */
int tty_buffer_request_room(struct tty_struct *tty, size_t size)
{
	struct tty_buffer *b, *n;
	int left;
	unsigned long flags;

	spin_lock_irqsave(&tty->buf.lock, flags);

	/* OPTIMISATION: We could keep a per tty "zero" sized buffer to
	   remove this conditional if its worth it. This would be invisible
	   to the callers */
	if ((b = tty->buf.tail) != NULL)
		left = b->size - b->used;
	else
		left = 0;

	if (left < size) {
		/* This is the slow path - looking for new buffers to use */
		if ((n = tty_buffer_find(tty, size)) != NULL) {
			if (b != NULL) {
				b->next = n;
				b->commit = b->used;
			} else
				tty->buf.head = n;
			tty->buf.tail = n;
		} else
			size = left;
	}

	spin_unlock_irqrestore(&tty->buf.lock, flags);
	return size;
}
EXPORT_SYMBOL_GPL(tty_buffer_request_room);

/**
 *	tty_insert_flip_string	-	Add characters to the tty buffer
 *	@tty: tty structure
 *	@chars: characters
 *	@size: size
 *
 *	Queue a series of bytes to the tty buffering. All the characters
 *	passed are marked as without error. Returns the number added.
 *
 *	Locking: Called functions may take tty->buf.lock
 */

int tty_insert_flip_string(struct tty_struct *tty, const unsigned char *chars,
				size_t size)
{
	int copied = 0;
	do {
		int space = tty_buffer_request_room(tty, size - copied);
		struct tty_buffer *tb = tty->buf.tail;
		/* If there is no space then tb may be NULL */
		if (unlikely(space == 0))
			break;
		memcpy(tb->char_buf_ptr + tb->used, chars, space);
		memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
		tb->used += space;
		copied += space;
		chars += space;
		/* There is a small chance that we need to split the data over
		   several buffers. If this is the case we must loop */
	} while (unlikely(size > copied));
	return copied;
}
EXPORT_SYMBOL(tty_insert_flip_string);

/**
 *	tty_insert_flip_string_flags	-	Add characters to the tty buffer
 *	@tty: tty structure
 *	@chars: characters
 *	@flags: flag bytes
 *	@size: size
 *
 *	Queue a series of bytes to the tty buffering. For each character
 *	the flags array indicates the status of the character. Returns the
 *	number added.
 *
 *	Locking: Called functions may take tty->buf.lock
 */

int tty_insert_flip_string_flags(struct tty_struct *tty,
		const unsigned char *chars, const char *flags, size_t size)
{
	int copied = 0;
	do {
		int space = tty_buffer_request_room(tty, size - copied);
		struct tty_buffer *tb = tty->buf.tail;
		/* If there is no space then tb may be NULL */
		if (unlikely(space == 0))
			break;
		memcpy(tb->char_buf_ptr + tb->used, chars, space);
		memcpy(tb->flag_buf_ptr + tb->used, flags, space);
		tb->used += space;
		copied += space;
		chars += space;
		flags += space;
		/* There is a small chance that we need to split the data over
		   several buffers. If this is the case we must loop */
	} while (unlikely(size > copied));
	return copied;
}
EXPORT_SYMBOL(tty_insert_flip_string_flags);

/**
 *	tty_schedule_flip	-	push characters to ldisc
 *	@tty: tty to push from
 *
 *	Takes any pending buffers and transfers their ownership to the
 *	ldisc side of the queue. It then schedules those characters for
 *	processing by the line discipline.
 *
 *	Locking: Takes tty->buf.lock
 */

void tty_schedule_flip(struct tty_struct *tty)
{
	unsigned long flags;
	spin_lock_irqsave(&tty->buf.lock, flags);
	if (tty->buf.tail != NULL)
		tty->buf.tail->commit = tty->buf.tail->used;
	spin_unlock_irqrestore(&tty->buf.lock, flags);
	schedule_delayed_work(&tty->buf.work, 1);
}
EXPORT_SYMBOL(tty_schedule_flip);

/**
 *	tty_prepare_flip_string		-	make room for characters
 *	@tty: tty
 *	@chars: return pointer for character write area
 *	@size: desired size
 *
 *	Prepare a block of space in the buffer for data. Returns the length
 *	available and buffer pointer to the space which is now allocated and
 *	accounted for as ready for normal characters. This is used for drivers
 *	that need their own block copy routines into the buffer. There is no
 *	guarantee the buffer is a DMA target!
 *
 *	Locking: May call functions taking tty->buf.lock
 */

int tty_prepare_flip_string(struct tty_struct *tty, unsigned char **chars,
								size_t size)
{
	int space = tty_buffer_request_room(tty, size);
	if (likely(space)) {
		struct tty_buffer *tb = tty->buf.tail;
		*chars = tb->char_buf_ptr + tb->used;
		memset(tb->flag_buf_ptr + tb->used, TTY_NORMAL, space);
		tb->used += space;
	}
	return space;
}

EXPORT_SYMBOL_GPL(tty_prepare_flip_string);

/**
 *	tty_prepare_flip_string_flags	-	make room for characters
 *	@tty: tty
 *	@chars: return pointer for character write area
 *	@flags: return pointer for status flag write area
 *	@size: desired size
 *
 *	Prepare a block of space in the buffer for data. Returns the length
 *	available and buffer pointer to the space which is now allocated and
 *	accounted for as ready for characters. This is used for drivers
 *	that need their own block copy routines into the buffer. There is no
 *	guarantee the buffer is a DMA target!
 *
 *	Locking: May call functions taking tty->buf.lock
 */

int tty_prepare_flip_string_flags(struct tty_struct *tty,
			unsigned char **chars, char **flags, size_t size)
{
	int space = tty_buffer_request_room(tty, size);
	if (likely(space)) {
		struct tty_buffer *tb = tty->buf.tail;
		*chars = tb->char_buf_ptr + tb->used;
		*flags = tb->flag_buf_ptr + tb->used;
		tb->used += space;
	}
	return space;
}

EXPORT_SYMBOL_GPL(tty_prepare_flip_string_flags);



/**
 *	tty_set_termios_ldisc		-	set ldisc field
 *	@tty: tty structure
 *	@num: line discipline number
 *
 *	This is probably overkill for real world processors but
 *	they are not on hot paths so a little discipline won't do
 *	any harm.
 *
 *	Locking: takes termios_mutex
 */

static void tty_set_termios_ldisc(struct tty_struct *tty, int num)
{
	mutex_lock(&tty->termios_mutex);
	tty->termios->c_line = num;
	mutex_unlock(&tty->termios_mutex);
}

/*
 *	This guards the refcounted line discipline lists. The lock
 *	must be taken with irqs off because there are hangup path
 *	callers who will do ldisc lookups and cannot sleep.
 */

static DEFINE_SPINLOCK(tty_ldisc_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
/* Line disc dispatch table */
static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];

/**
 *	tty_register_ldisc	-	install a line discipline
 *	@disc: ldisc number
 *	@new_ldisc: pointer to the ldisc object
 *
 *	Installs a new line discipline into the kernel. The discipline
 *	is set up as unreferenced and then made available to the kernel
 *	from this point onwards.
 *
 *	Locking:
 *		takes tty_ldisc_lock to guard against ldisc races
 */

int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc)
{
	unsigned long flags;
	int ret = 0;

	if (disc < N_TTY || disc >= NR_LDISCS)
		return -EINVAL;

	spin_lock_irqsave(&tty_ldisc_lock, flags);
	tty_ldiscs[disc] = new_ldisc;
	new_ldisc->num = disc;
	new_ldisc->refcount = 0;
	spin_unlock_irqrestore(&tty_ldisc_lock, flags);

	return ret;
}
EXPORT_SYMBOL(tty_register_ldisc);

/**
 *	tty_unregister_ldisc	-	unload a line discipline
 *	@disc: ldisc number
 *	@new_ldisc: pointer to the ldisc object
 *
 *	Remove a line discipline from the kernel providing it is not
 *	currently in use.
 *
 *	Locking:
 *		takes tty_ldisc_lock to guard against ldisc races
 */

int tty_unregister_ldisc(int disc)
{
	unsigned long flags;
	int ret = 0;

	if (disc < N_TTY || disc >= NR_LDISCS)
		return -EINVAL;

	spin_lock_irqsave(&tty_ldisc_lock, flags);
	if (tty_ldiscs[disc]->refcount)
		ret = -EBUSY;
	else
		tty_ldiscs[disc] = NULL;
	spin_unlock_irqrestore(&tty_ldisc_lock, flags);

	return ret;
}
EXPORT_SYMBOL(tty_unregister_ldisc);


/**
 *	tty_ldisc_try_get	-	try and reference an ldisc
 *	@disc: ldisc number
 *	@ld: tty ldisc structure to complete
 *
 *	Attempt to open and lock a line discipline into place. Return
 *	the line discipline refcounted and assigned in ld. On an error
 *	report the error code back
 */

static int tty_ldisc_try_get(int disc, struct tty_ldisc *ld)
{
	unsigned long flags;
	struct tty_ldisc_ops *ldops;
	int err = -EINVAL;
	
	spin_lock_irqsave(&tty_ldisc_lock, flags);
	ld->ops = NULL;
	ldops = tty_ldiscs[disc];
	/* Check the entry is defined */
	if (ldops) {
		/* If the module is being unloaded we can't use it */
		if (!try_module_get(ldops->owner))
			err = -EAGAIN;
		else {
			/* lock it */
			ldops->refcount++;
			ld->ops = ldops;
			err = 0;
		}
	}
	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
	return err;
}

/**
 *	tty_ldisc_get		-	take a reference to an ldisc
 *	@disc: ldisc number
 *	@ld: tty line discipline structure to use
 *
 *	Takes a reference to a line discipline. Deals with refcounts and
 *	module locking counts. Returns NULL if the discipline is not available.
 *	Returns a pointer to the discipline and bumps the ref count if it is
 *	available
 *
 *	Locking:
 *		takes tty_ldisc_lock to guard against ldisc races
 */

static int tty_ldisc_get(int disc, struct tty_ldisc *ld)
{
	int err;

	if (disc < N_TTY || disc >= NR_LDISCS)
		return -EINVAL;
	err = tty_ldisc_try_get(disc, ld);
	if (err == -EAGAIN) {
		request_module("tty-ldisc-%d", disc);
		err = tty_ldisc_try_get(disc, ld);
	}
	return err;
}

/**
 *	tty_ldisc_put		-	drop ldisc reference
 *	@disc: ldisc number
 *
 *	Drop a reference to a line discipline. Manage refcounts and
 *	module usage counts
 *
 *	Locking:
 *		takes tty_ldisc_lock to guard against ldisc races
 */

static void tty_ldisc_put(struct tty_ldisc_ops *ld)
{
	unsigned long flags;
	int disc = ld->num;

	BUG_ON(disc < N_TTY || disc >= NR_LDISCS);

	spin_lock_irqsave(&tty_ldisc_lock, flags);
	ld = tty_ldiscs[disc];
	BUG_ON(ld->refcount == 0);
	ld->refcount--;
	module_put(ld->owner);
	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}

static void * tty_ldiscs_seq_start(struct seq_file *m, loff_t *pos)
{
	return (*pos < NR_LDISCS) ? pos : NULL;
}

static void * tty_ldiscs_seq_next(struct seq_file *m, void *v, loff_t *pos)
{
	(*pos)++;
	return (*pos < NR_LDISCS) ? pos : NULL;
}

static void tty_ldiscs_seq_stop(struct seq_file *m, void *v)
{
}

static int tty_ldiscs_seq_show(struct seq_file *m, void *v)
{
	int i = *(loff_t *)v;
	struct tty_ldisc ld;
	
	if (tty_ldisc_get(i, &ld) < 0)
		return 0;
	seq_printf(m, "%-10s %2d\n", ld.ops->name ? ld.ops->name : "???", i);
	tty_ldisc_put(ld.ops);
	return 0;
}

static const struct seq_operations tty_ldiscs_seq_ops = {
	.start	= tty_ldiscs_seq_start,
	.next	= tty_ldiscs_seq_next,
	.stop	= tty_ldiscs_seq_stop,
	.show	= tty_ldiscs_seq_show,
};

static int proc_tty_ldiscs_open(struct inode *inode, struct file *file)
{
	return seq_open(file, &tty_ldiscs_seq_ops);
}

const struct file_operations tty_ldiscs_proc_fops = {
	.owner		= THIS_MODULE,
	.open		= proc_tty_ldiscs_open,
	.read		= seq_read,
	.llseek		= seq_lseek,
	.release	= seq_release,
};

/**
 *	tty_ldisc_assign	-	set ldisc on a tty
 *	@tty: tty to assign
 *	@ld: line discipline
 *
 *	Install an instance of a line discipline into a tty structure. The
 *	ldisc must have a reference count above zero to ensure it remains/
 *	The tty instance refcount starts at zero.
 *
 *	Locking:
 *		Caller must hold references
 */

static void tty_ldisc_assign(struct tty_struct *tty, struct tty_ldisc *ld)
{
	ld->refcount = 0;
	tty->ldisc = *ld;
}

/**
 *	tty_ldisc_try		-	internal helper
 *	@tty: the tty
 *
 *	Make a single attempt to grab and bump the refcount on
 *	the tty ldisc. Return 0 on failure or 1 on success. This is
 *	used to implement both the waiting and non waiting versions
 *	of tty_ldisc_ref
 *
 *	Locking: takes tty_ldisc_lock
 */

static int tty_ldisc_try(struct tty_struct *tty)
{
	unsigned long flags;
	struct tty_ldisc *ld;
	int ret = 0;

	spin_lock_irqsave(&tty_ldisc_lock, flags);
	ld = &tty->ldisc;
	if (test_bit(TTY_LDISC, &tty->flags)) {
		ld->refcount++;
		ret = 1;
	}
	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
	return ret;
}

/**
 *	tty_ldisc_ref_wait	-	wait for the tty ldisc
 *	@tty: tty device
 *
 *	Dereference the line discipline for the terminal and take a
 *	reference to it. If the line discipline is in flux then
 *	wait patiently until it changes.
 *
 *	Note: Must not be called from an IRQ/timer context. The caller
 *	must also be careful not to hold other locks that will deadlock
 *	against a discipline change, such as an existing ldisc reference
 *	(which we check for)
 *
 *	Locking: call functions take tty_ldisc_lock
 */

struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
{
	/* wait_event is a macro */
	wait_event(tty_ldisc_wait, tty_ldisc_try(tty));
	if (tty->ldisc.refcount == 0)
		printk(KERN_ERR "tty_ldisc_ref_wait\n");
	return &tty->ldisc;
}

EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);

/**
 *	tty_ldisc_ref		-	get the tty ldisc
 *	@tty: tty device
 *
 *	Dereference the line discipline for the terminal and take a
 *	reference to it. If the line discipline is in flux then
 *	return NULL. Can be called from IRQ and timer functions.
 *
 *	Locking: called functions take tty_ldisc_lock
 */

struct tty_ldisc *tty_ldisc_ref(struct tty_struct *tty)
{
	if (tty_ldisc_try(tty))
		return &tty->ldisc;
	return NULL;
}

EXPORT_SYMBOL_GPL(tty_ldisc_ref);

/**
 *	tty_ldisc_deref		-	free a tty ldisc reference
 *	@ld: reference to free up
 *
 *	Undoes the effect of tty_ldisc_ref or tty_ldisc_ref_wait. May
 *	be called in IRQ context.
 *
 *	Locking: takes tty_ldisc_lock
 */

void tty_ldisc_deref(struct tty_ldisc *ld)
{
	unsigned long flags;

	BUG_ON(ld == NULL);

	spin_lock_irqsave(&tty_ldisc_lock, flags);
	if (ld->refcount == 0)
		printk(KERN_ERR "tty_ldisc_deref: no references.\n");
	else
		ld->refcount--;
	if (ld->refcount == 0)
		wake_up(&tty_ldisc_wait);
	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
}

EXPORT_SYMBOL_GPL(tty_ldisc_deref);

/**
 *	tty_ldisc_enable	-	allow ldisc use
 *	@tty: terminal to activate ldisc on
 *
 *	Set the TTY_LDISC flag when the line discipline can be called
 *	again. Do necessary wakeups for existing sleepers.
 *
 *	Note: nobody should set this bit except via this function. Clearing
 *	directly is allowed.
 */

static void tty_ldisc_enable(struct tty_struct *tty)
{
	set_bit(TTY_LDISC, &tty->flags);
	wake_up(&tty_ldisc_wait);
}

/**
 *	tty_ldisc_restore	-	helper for tty ldisc change
 *	@tty: tty to recover
 *	@old: previous ldisc
 *
 *	Restore the previous line discipline or N_TTY when a line discipline
 *	change fails due to an open error
 */

static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
{
	char buf[64];
	struct tty_ldisc new_ldisc;

	/* There is an outstanding reference here so this is safe */
	tty_ldisc_get(old->ops->num, old);
	tty_ldisc_assign(tty, old);
	tty_set_termios_ldisc(tty, old->ops->num);
	if (old->ops->open && (old->ops->open(tty) < 0)) {
		tty_ldisc_put(old->ops);
		/* This driver is always present */
		if (tty_ldisc_get(N_TTY, &new_ldisc) < 0)
			panic("n_tty: get");
		tty_ldisc_assign(tty, &new_ldisc);
		tty_set_termios_ldisc(tty, N_TTY);
		if (new_ldisc.ops->open) {
			int r = new_ldisc.ops->open(tty);
				if (r < 0)
				panic("Couldn't open N_TTY ldisc for "
				      "%s --- error %d.",
				      tty_name(tty, buf), r);
		}
	}
}

/**
 *	tty_set_ldisc		-	set line discipline
 *	@tty: the terminal to set
 *	@ldisc: the line discipline
 *
 *	Set the discipline of a tty line. Must be called from a process
 *	context.
 *
 *	Locking: takes tty_ldisc_lock.
 *		 called functions take termios_mutex
 */

static int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
	int retval;
	struct tty_ldisc o_ldisc, new_ldisc;
	int work;
	unsigned long flags;
	struct tty_struct *o_tty;

restart:
	/* This is a bit ugly for now but means we can break the 'ldisc
	   is part of the tty struct' assumption later */
	retval = tty_ldisc_get(ldisc, &new_ldisc);
	if (retval)
		return retval;

	/*
	 *	Problem: What do we do if this blocks ?
	 */

	tty_wait_until_sent(tty, 0);

	if (tty->ldisc.ops->num == ldisc) {
		tty_ldisc_put(new_ldisc.ops);
		return 0;
	}

	/*
	 *	No more input please, we are switching. The new ldisc
	 *	will update this value in the ldisc open function
	 */

	tty->receive_room = 0;

	o_ldisc = tty->ldisc;
	o_tty = tty->link;

	/*
	 *	Make sure we don't change while someone holds a
	 *	reference to the line discipline. The TTY_LDISC bit
	 *	prevents anyone taking a reference once it is clear.
	 *	We need the lock to avoid racing reference takers.
	 */

	spin_lock_irqsave(&tty_ldisc_lock, flags);
	if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) {
		if (tty->ldisc.refcount) {
			/* Free the new ldisc we grabbed. Must drop the lock
			   first. */
			spin_unlock_irqrestore(&tty_ldisc_lock, flags);
			tty_ldisc_put(o_ldisc.ops);
			/*
			 * There are several reasons we may be busy, including
			 * random momentary I/O traffic. We must therefore
			 * retry. We could distinguish between blocking ops
			 * and retries if we made tty_ldisc_wait() smarter.
			 * That is up for discussion.
			 */
			if (wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount == 0) < 0)
				return -ERESTARTSYS;
			goto restart;
		}
		if (o_tty && o_tty->ldisc.refcount) {
			spin_unlock_irqrestore(&tty_ldisc_lock, flags);
			tty_ldisc_put(o_tty->ldisc.ops);
			if (wait_event_interruptible(tty_ldisc_wait, o_tty->ldisc.refcount == 0) < 0)
				return -ERESTARTSYS;
			goto restart;
		}
	}
	/*
	 *	If the TTY_LDISC bit is set, then we are racing against
	 *	another ldisc change
	 */
	if (!test_bit(TTY_LDISC, &tty->flags)) {
		struct tty_ldisc *ld;
		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
		tty_ldisc_put(new_ldisc.ops);
		ld = tty_ldisc_ref_wait(tty);
		tty_ldisc_deref(ld);
		goto restart;
	}

	clear_bit(TTY_LDISC, &tty->flags);
	if (o_tty)
		clear_bit(TTY_LDISC, &o_tty->flags);
	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
	
	/*
	 *	From this point on we know nobody has an ldisc
	 *	usage reference, nor can they obtain one until
	 *	we say so later on.
	 */

	work = cancel_delayed_work(&tty->buf.work);
	/*
	 * Wait for ->hangup_work and ->buf.work handlers to terminate
	 * MUST NOT hold locks here.
	 */
	flush_scheduled_work();
	/* Shutdown the current discipline. */
	if (o_ldisc.ops->close)
		(o_ldisc.ops->close)(tty);

	/* Now set up the new line discipline. */
	tty_ldisc_assign(tty, &new_ldisc);
	tty_set_termios_ldisc(tty, ldisc);
	if (new_ldisc.ops->open)
		retval = (new_ldisc.ops->open)(tty);
	if (retval < 0) {
		tty_ldisc_put(new_ldisc.ops);
		tty_ldisc_restore(tty, &o_ldisc);
	}
	/* At this point we hold a reference to the new ldisc and a
	   a reference to the old ldisc. If we ended up flipping back
	   to the existing ldisc we have two references to it */

	if (tty->ldisc.ops->num != o_ldisc.ops->num && tty->ops->set_ldisc)
		tty->ops->set_ldisc(tty);

	tty_ldisc_put(o_ldisc.ops);

	/*
	 *	Allow ldisc referencing to occur as soon as the driver
	 *	ldisc callback completes.
	 */

	tty_ldisc_enable(tty);
	if (o_tty)
		tty_ldisc_enable(o_tty);

	/* Restart it in case no characters kick it off. Safe if
	   already running */
	if (work)
		schedule_delayed_work(&tty->buf.work, 1);
	return retval;
}

/**
 *	get_tty_driver		-	find device of a tty
 *	@dev_t: device identifier
 *	@index: returns the index of the tty
 *
 *	This routine returns a tty driver structure, given a device number
 *	and also passes back the index number.
 *
 *	Locking: caller must hold tty_mutex
 */

static struct tty_driver *get_tty_driver(dev_t device, int *index)
{
	struct tty_driver *p;

	list_for_each_entry(p, &tty_drivers, tty_drivers) {
		dev_t base = MKDEV(p->major, p->minor_start);
		if (device < base || device >= base + p->num)
			continue;
		*index = device - base;
		return p;
	}
	return NULL;
}

#ifdef CONFIG_CONSOLE_POLL

/**
 *	tty_find_polling_driver	-	find device of a polled tty
 *	@name: name string to match
 *	@line: pointer to resulting tty line nr
 *
 *	This routine returns a tty driver structure, given a name
 *	and the condition that the tty driver is capable of polled
 *	operation.
 */
struct tty_driver *tty_find_polling_driver(char *name, int *line)
{
	struct tty_driver *p, *res = NULL;
	int tty_line = 0;
	char *str;

	mutex_lock(&tty_mutex);
	/* Search through the tty devices to look for a match */
	list_for_each_entry(p, &tty_drivers, tty_drivers) {
		str = name + strlen(p->name);
		tty_line = simple_strtoul(str, &str, 10);
		if (*str == ',')
			str++;
		if (*str == '\0')
			str = NULL;

		if (tty_line >= 0 && tty_line <= p->num && p->ops &&
		    p->ops->poll_init && !p->ops->poll_init(p, tty_line, str)) {
			res = p;
			*line = tty_line;
			break;
		}
	}
	mutex_unlock(&tty_mutex);

	return res;
}
EXPORT_SYMBOL_GPL(tty_find_polling_driver);
#endif

/**
 *	tty_check_change	-	check for POSIX terminal changes
 *	@tty: tty to check
 *
 *	If we try to write to, or set the state of, a terminal and we're
 *	not in the foreground, send a SIGTTOU.  If the signal is blocked or
 *	ignored, go ahead and perform the operation.  (POSIX 7.2)
 *
 *	Locking: ctrl_lock
 */

int tty_check_change(struct tty_struct *tty)
{
	unsigned long flags;
	int ret = 0;

	if (current->signal->tty != tty)
		return 0;

	spin_lock_irqsave(&tty->ctrl_lock, flags);

	if (!tty->pgrp) {
		printk(KERN_WARNING "tty_check_change: tty->pgrp == NULL!\n");
		goto out_unlock;
	}
	if (task_pgrp(current) == tty->pgrp)
		goto out_unlock;
	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
	if (is_ignored(SIGTTOU))
		goto out;
	if (is_current_pgrp_orphaned()) {
		ret = -EIO;
		goto out;
	}
	kill_pgrp(task_pgrp(current), SIGTTOU, 1);
	set_thread_flag(TIF_SIGPENDING);
	ret = -ERESTARTSYS;
out:
	return ret;
out_unlock:
	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
	return ret;
}

EXPORT_SYMBOL(tty_check_change);

static ssize_t hung_up_tty_read(struct file *file, char __user *buf,
				size_t count, loff_t *ppos)
{
	return 0;
}

static ssize_t hung_up_tty_write(struct file *file, const char __user *buf,
				 size_t count, loff_t *ppos)
{
	return -EIO;
}

/* No kernel lock held - none needed ;) */
static unsigned int hung_up_tty_poll(struct file *filp, poll_table *wait)
{
	return POLLIN | POLLOUT | POLLERR | POLLHUP | POLLRDNORM | POLLWRNORM;
}

static long hung_up_tty_ioctl(struct file *file, unsigned int cmd,
		unsigned long arg)
{
	return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}

static long hung_up_tty_compat_ioctl(struct file *file,
				     unsigned int cmd, unsigned long arg)
{
	return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}

static const struct file_operations tty_fops = {
	.llseek		= no_llseek,
	.read		= tty_read,
	.write		= tty_write,
	.poll		= tty_poll,
	.unlocked_ioctl	= tty_ioctl,
	.compat_ioctl	= tty_compat_ioctl,
	.open		= tty_open,
	.release	= tty_release,
	.fasync		= tty_fasync,
};

#ifdef CONFIG_UNIX98_PTYS
static const struct file_operations ptmx_fops = {
	.llseek		= no_llseek,
	.read		= tty_read,
	.write		= tty_write,
	.poll		= tty_poll,
	.unlocked_ioctl	= tty_ioctl,
	.compat_ioctl	= tty_compat_ioctl,
	.open		= ptmx_open,
	.release	= tty_release,
	.fasync		= tty_fasync,
};
#endif

static const struct file_operations console_fops = {
	.llseek		= no_llseek,
	.read		= tty_read,
	.write		= redirected_tty_write,
	.poll		= tty_poll,
	.unlocked_ioctl	= tty_ioctl,
	.compat_ioctl	= tty_compat_ioctl,
	.open		= tty_open,
	.release	= tty_release,
	.fasync		= tty_fasync,
};

static const struct file_operations hung_up_tty_fops = {
	.llseek		= no_llseek,
	.read		= hung_up_tty_read,
	.write		= hung_up_tty_write,
	.poll		= hung_up_tty_poll,
	.unlocked_ioctl	= hung_up_tty_ioctl,
	.compat_ioctl	= hung_up_tty_compat_ioctl,
	.release	= tty_release,
};

static DEFINE_SPINLOCK(redirect_lock);
static struct file *redirect;

/**
 *	tty_wakeup	-	request more data
 *	@tty: terminal
 *
 *	Internal and external helper for wakeups of tty. This function
 *	informs the line discipline if present that the driver is ready
 *	to receive more output data.
 */

void tty_wakeup(struct tty_struct *tty)
{
	struct tty_ldisc *ld;

	if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) {
		ld = tty_ldisc_ref(tty);
		if (ld) {
			if (ld->ops->write_wakeup)
				ld->ops->write_wakeup(tty);
			tty_ldisc_deref(ld);
		}
	}
	wake_up_interruptible(&tty->write_wait);
}

EXPORT_SYMBOL_GPL(tty_wakeup);

/**
 *	tty_ldisc_flush	-	flush line discipline queue
 *	@tty: tty
 *
 *	Flush the line discipline queue (if any) for this tty. If there
 *	is no line discipline active this is a no-op.
 */

void tty_ldisc_flush(struct tty_struct *tty)
{
	struct tty_ldisc *ld = tty_ldisc_ref(tty);
	if (ld) {
		if (ld->ops->flush_buffer)
			ld->ops->flush_buffer(tty);
		tty_ldisc_deref(ld);
	}
	tty_buffer_flush(tty);
}

EXPORT_SYMBOL_GPL(tty_ldisc_flush);

/**
 *	tty_reset_termios	-	reset terminal state
 *	@tty: tty to reset
 *
 *	Restore a terminal to the driver default state
 */

static void tty_reset_termios(struct tty_struct *tty)
{
	mutex_lock(&tty->termios_mutex);
	*tty->termios = tty->driver->init_termios;
	tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
	tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
	mutex_unlock(&tty->termios_mutex);
}

/**
 *	do_tty_hangup		-	actual handler for hangup events
 *	@work: tty device
 *
k *	This can be called by the "eventd" kernel thread.  That is process
 *	synchronous but doesn't hold any locks, so we need to make sure we
 *	have the appropriate locks for what we're doing.
 *
 *	The hangup event clears any pending redirections onto the hung up
 *	device. It ensures future writes will error and it does the needed
 *	line discipline hangup and signal delivery. The tty object itself
 *	remains intact.
 *
 *	Locking:
 *		BKL
 *		  redirect lock for undoing redirection
 *		  file list lock for manipulating list of ttys
 *		  tty_ldisc_lock from called functions
 *		  termios_mutex resetting termios data
 *		  tasklist_lock to walk task list for hangup event
 *		    ->siglock to protect ->signal/->sighand
 */
static void do_tty_hangup(struct work_struct *work)
{
	struct tty_struct *tty =
		container_of(work, struct tty_struct, hangup_work);
	struct file *cons_filp = NULL;
	struct file *filp, *f = NULL;
	struct task_struct *p;
	struct tty_ldisc *ld;
	int    closecount = 0, n;
	unsigned long flags;

	if (!tty)
		return;

	/* inuse_filps is protected by the single kernel lock */
	lock_kernel();

	spin_lock(&redirect_lock);
	if (redirect && redirect->private_data == tty) {
		f = redirect;
		redirect = NULL;
	}
	spin_unlock(&redirect_lock);

	check_tty_count(tty, "do_tty_hangup");
	file_list_lock();
	/* This breaks for file handles being sent over AF_UNIX sockets ? */
	list_for_each_entry(filp, &tty->tty_files, f_u.fu_list) {
		if (filp->f_op->write == redirected_tty_write)
			cons_filp = filp;
		if (filp->f_op->write != tty_write)
			continue;
		closecount++;
		tty_fasync(-1, filp, 0);	/* can't block */
		filp->f_op = &hung_up_tty_fops;
	}
	file_list_unlock();
	/*
	 * FIXME! What are the locking issues here? This may me overdoing
	 * things... This question is especially important now that we've
	 * removed the irqlock.
	 */
	ld = tty_ldisc_ref(tty);
	if (ld != NULL) {
		/* We may have no line discipline at this point */
		if (ld->ops->flush_buffer)
			ld->ops->flush_buffer(tty);
		tty_driver_flush_buffer(tty);
		if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
		    ld->ops->write_wakeup)
			ld->ops->write_wakeup(tty);
		if (ld->ops->hangup)
			ld->ops->hangup(tty);
	}
	/*
	 * FIXME: Once we trust the LDISC code better we can wait here for
	 * ldisc completion and fix the driver call race
	 */
	wake_up_interruptible(&tty->write_wait);
	wake_up_interruptible(&tty->read_wait);
	/*
	 * Shutdown the current line discipline, and reset it to
	 * N_TTY.
	 */
	if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
		tty_reset_termios(tty);
	/* Defer ldisc switch */
	/* tty_deferred_ldisc_switch(N_TTY);

	  This should get done automatically when the port closes and
	  tty_release is called */

	read_lock(&tasklist_lock);
	if (tty->session) {
		do_each_pid_task(tty->session, PIDTYPE_SID, p) {
			spin_lock_irq(&p->sighand->siglock);
			if (p->signal->tty == tty)
				p->signal->tty = NULL;
			if (!p->signal->leader) {
				spin_unlock_irq(&p->sighand->siglock);
				continue;
			}
			__group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
			__group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
			put_pid(p->signal->tty_old_pgrp);  /* A noop */
			spin_lock_irqsave(&tty->ctrl_lock, flags);
			if (tty->pgrp)
				p->signal->tty_old_pgrp = get_pid(tty->pgrp);
			spin_unlock_irqrestore(&tty->ctrl_lock, flags);
			spin_unlock_irq(&p->sighand->siglock);
		} while_each_pid_task(tty->session, PIDTYPE_SID, p);
	}
	read_unlock(&tasklist_lock);

	spin_lock_irqsave(&tty->ctrl_lock, flags);
	tty->flags = 0;
	put_pid(tty->session);
	put_pid(tty->pgrp);
	tty->session = NULL;
	tty->pgrp = NULL;
	tty->ctrl_status = 0;
	spin_unlock_irqrestore(&tty->ctrl_lock, flags);

	/*
	 * If one of the devices matches a console pointer, we
	 * cannot just call hangup() because that will cause
	 * tty->count and state->count to go out of sync.
	 * So we just call close() the right number of times.
	 */
	if (cons_filp) {
		if (tty->ops->close)
			for (n = 0; n < closecount; n++)
				tty->ops->close(tty, cons_filp);
	} else if (tty->ops->hangup)
		(tty->ops->hangup)(tty);
	/*
	 * We don't want to have driver/ldisc interactions beyond
	 * the ones we did here. The driver layer expects no
	 * calls after ->hangup() from the ldisc side. However we
	 * can't yet guarantee all that.
	 */
	set_bit(TTY_HUPPED, &tty->flags);
	if (ld) {
		tty_ldisc_enable(tty);
		tty_ldisc_deref(ld);
	}
	unlock_kernel();
	if (f)
		fput(f);
}

/**
 *	tty_hangup		-	trigger a hangup event
 *	@tty: tty to hangup
 *
 *	A carrier loss (virtual or otherwise) has occurred on this like
 *	schedule a hangup sequence to run after this event.
 */

void tty_hangup(struct tty_struct *tty)
{
#ifdef TTY_DEBUG_HANGUP
	char	buf[64];
	printk(KERN_DEBUG "%s hangup...\n", tty_name(tty, buf));
#endif
	schedule_work(&tty->hangup_work);
}

EXPORT_SYMBOL(tty_hangup);

/**
 *	tty_vhangup		-	process vhangup
 *	@tty: tty to hangup
 *
 *	The user has asked via system call for the terminal to be hung up.
 *	We do this synchronously so that when the syscall returns the process
 *	is complete. That guarantee is necessary for security reasons.
 */

void tty_vhangup(struct tty_struct *tty)
{
#ifdef TTY_DEBUG_HANGUP
	char	buf[64];

	printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
#endif
	do_tty_hangup(&tty->hangup_work);
}

EXPORT_SYMBOL(tty_vhangup);

/**
 *	tty_hung_up_p		-	was tty hung up
 *	@filp: file pointer of tty
 *
 *	Return true if the tty has been subject to a vhangup or a carrier
 *	loss
 */

int tty_hung_up_p(struct file *filp)
{
	return (filp->f_op == &hung_up_tty_fops);
}

EXPORT_SYMBOL(tty_hung_up_p);

/**
 *	is_tty	-	checker whether file is a TTY
 *	@filp:		file handle that may be a tty
 *
 *	Check if the file handle is a tty handle.
 */

int is_tty(struct file *filp)
{
	return filp->f_op->read == tty_read
		|| filp->f_op->read == hung_up_tty_read;
}

static void session_clear_tty(struct pid *session)
{
	struct task_struct *p;
	do_each_pid_task(session, PIDTYPE_SID, p) {
		proc_clear_tty(p);
	} while_each_pid_task(session, PIDTYPE_SID, p);
}

/**
 *	disassociate_ctty	-	disconnect controlling tty
 *	@on_exit: true if exiting so need to "hang up" the session
 *
 *	This function is typically called only by the session leader, when
 *	it wants to disassociate itself from its controlling tty.
 *
 *	It performs the following functions:
 * 	(1)  Sends a SIGHUP and SIGCONT to the foreground process group
 * 	(2)  Clears the tty from being controlling the session
 * 	(3)  Clears the controlling tty for all processes in the
 * 		session group.
 *
 *	The argument on_exit is set to 1 if called when a process is
 *	exiting; it is 0 if called by the ioctl TIOCNOTTY.
 *
 *	Locking:
 *		BKL is taken for hysterical raisins
 *		  tty_mutex is taken to protect tty
 *		  ->siglock is taken to protect ->signal/->sighand
 *		  tasklist_lock is taken to walk process list for sessions
 *		    ->siglock is taken to protect ->signal/->sighand
 */

void disassociate_ctty(int on_exit)
{
	struct tty_struct *tty;
	struct pid *tty_pgrp = NULL;


	mutex_lock(&tty_mutex);
	tty = get_current_tty();
	if (tty) {
		tty_pgrp = get_pid(tty->pgrp);
		mutex_unlock(&tty_mutex);
		lock_kernel();
		/* XXX: here we race, there is nothing protecting tty */
		if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY)
			tty_vhangup(tty);
		unlock_kernel();
	} else if (on_exit) {
		struct pid *old_pgrp;
		spin_lock_irq(&current->sighand->siglock);
		old_pgrp = current->signal->tty_old_pgrp;
		current->signal->tty_old_pgrp = NULL;
		spin_unlock_irq(&current->sighand->siglock);
		if (old_pgrp) {
			kill_pgrp(old_pgrp, SIGHUP, on_exit);
			kill_pgrp(old_pgrp, SIGCONT, on_exit);
			put_pid(old_pgrp);
		}
		mutex_unlock(&tty_mutex);
		return;
	}
	if (tty_pgrp) {
		kill_pgrp(tty_pgrp, SIGHUP, on_exit);
		if (!on_exit)
			kill_pgrp(tty_pgrp, SIGCONT, on_exit);
		put_pid(tty_pgrp);
	}

	spin_lock_irq(&current->sighand->siglock);
	put_pid(current->signal->tty_old_pgrp);
	current->signal->tty_old_pgrp = NULL;
	spin_unlock_irq(&current->sighand->siglock);

	mutex_lock(&tty_mutex);
	/* It is possible that do_tty_hangup has free'd this tty */
	tty = get_current_tty();
	if (tty) {
		unsigned long flags;
		spin_lock_irqsave(&tty->ctrl_lock, flags);
		put_pid(tty->session);
		put_pid(tty->pgrp);
		tty->session = NULL;
		tty->pgrp = NULL;
		spin_unlock_irqrestore(&tty->ctrl_lock, flags);
	} else {
#ifdef TTY_DEBUG_HANGUP
		printk(KERN_DEBUG "error attempted to write to tty [0x%p]"
		       " = NULL", tty);
#endif
	}
	mutex_unlock(&tty_mutex);

	/* Now clear signal->tty under the lock */
	read_lock(&tasklist_lock);
	session_clear_tty(task_session(current));
	read_unlock(&tasklist_lock);
}

/**
 *
 *	no_tty	- Ensure the current process does not have a controlling tty
 */
void no_tty(void)
{
	struct task_struct *tsk = current;
	lock_kernel();
	if (tsk->signal->leader)
		disassociate_ctty(0);
	unlock_kernel();
	proc_clear_tty(tsk);
}


/**
 *	stop_tty	-	propagate flow control
 *	@tty: tty to stop
 *
 *	Perform flow control to the driver. For PTY/TTY pairs we
 *	must also propagate the TIOCKPKT status. May be called
 *	on an already stopped device and will not re-call the driver
 *	method.
 *
 *	This functionality is used by both the line disciplines for
 *	halting incoming flow and by the driver. It may therefore be
 *	called from any context, may be under the tty atomic_write_lock
 *	but not always.
 *
 *	Locking:
 *		Uses the tty control lock internally
 */

void stop_tty(struct tty_struct *tty)
{
	unsigned long flags;
	spin_lock_irqsave(&tty->ctrl_lock, flags);
	if (tty->stopped) {
		spin_unlock_irqrestore(&tty->ctrl_lock, flags);
		return;
	}
	tty->stopped = 1;
	if (tty->link && tty->link->packet) {
		tty->ctrl_status &= ~TIOCPKT_START;
		tty->ctrl_status |= TIOCPKT_STOP;
		wake_up_interruptible(&tty->link->read_wait);
	}
	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
	if (tty->ops->stop)
		(tty->ops->stop)(tty);
}

EXPORT_SYMBOL(stop_tty);

/**
 *	start_tty	-	propagate flow control
 *	@tty: tty to start
 *
 *	Start a tty that has been stopped if at all possible. Perform
 *	any necessary wakeups and propagate the TIOCPKT status. If this
 *	is the tty was previous stopped and is being started then the
 *	driver start method is invoked and the line discipline woken.
 *
 *	Locking:
 *		ctrl_lock
 */

void start_tty(struct tty_struct *tty)
{
	unsigned long flags;
	spin_lock_irqsave(&tty->ctrl_lock, flags);
	if (!tty->stopped || tty->flow_stopped) {
		spin_unlock_irqrestore(&tty->ctrl_lock, flags);
		return;
	}
	tty->stopped = 0;
	if (tty->link && tty->link->packet) {
		tty->ctrl_status &= ~TIOCPKT_STOP;
		tty->ctrl_status |= TIOCPKT_START;
		wake_up_interruptible(&tty->link->read_wait);
	}
	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
	if (tty->ops->start)
		(tty->ops->start)(tty);
	/* If we have a running line discipline it may need kicking */
	tty_wakeup(tty);
}

EXPORT_SYMBOL(start_tty);

/**
 *	tty_read	-	read method for tty device files
 *	@file: pointer to tty file
 *	@buf: user buffer
 *	@count: size of user buffer
 *	@ppos: unused
 *
 *	Perform the read system call function on this terminal device. Checks
 *	for hung up devices before calling the line discipline method.
 *
 *	Locking:
 *		Locks the line discipline internally while needed. Multiple
 *	read calls may be outstanding in parallel.
 */

static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
			loff_t *ppos)
{
	int i;
	struct tty_struct *tty;
	struct inode *inode;
	struct tty_ldisc *ld;

	tty = (struct tty_struct *)file->private_data;
	inode = file->f_path.dentry->d_inode;
	if (tty_paranoia_check(tty, inode, "tty_read"))
		return -EIO;
	if (!tty || (test_bit(TTY_IO_ERROR, &tty->flags)))
		return -EIO;

	/* We want to wait for the line discipline to sort out in this
	   situation */
	ld = tty_ldisc_ref_wait(tty);
	if (ld->ops->read)
		i = (ld->ops->read)(tty, file, buf, count);
	else
		i = -EIO;
	tty_ldisc_deref(ld);
	if (i > 0)
		inode->i_atime = current_fs_time(inode->i_sb);
	return i;
}

void tty_write_unlock(struct tty_struct *tty)
{
	mutex_unlock(&tty->atomic_write_lock);
	wake_up_interruptible(&tty->write_wait);
}

int tty_write_lock(struct tty_struct *tty, int ndelay)
{
	if (!mutex_trylock(&tty->atomic_write_lock)) {
		if (ndelay)
			return -EAGAIN;
		if (mutex_lock_interruptible(&tty->atomic_write_lock))
			return -ERESTARTSYS;
	}
	return 0;
}

/*
 * Split writes up in sane blocksizes to avoid
 * denial-of-service type attacks
 */
static inline ssize_t do_tty_write(
	ssize_t (*write)(struct tty_struct *, struct file *, const unsigned char *, size_t),
	struct tty_struct *tty,
	struct file *file,
	const char __user *buf,
	size_t count)
{
	ssize_t ret, written = 0;
	unsigned int chunk;

	ret = tty_write_lock(tty, file->f_flags & O_NDELAY);
	if (ret < 0)
		return ret;

	/*
	 * We chunk up writes into a temporary buffer. This
	 * simplifies low-level drivers immensely, since they
	 * don't have locking issues and user mode accesses.
	 *
	 * But if TTY_NO_WRITE_SPLIT is set, we should use a
	 * big chunk-size..
	 *
	 * The default chunk-size is 2kB, because the NTTY
	 * layer has problems with bigger chunks. It will
	 * claim to be able to handle more characters than
	 * it actually does.
	 *
	 * FIXME: This can probably go away now except that 64K chunks
	 * are too likely to fail unless switched to vmalloc...
	 */
	chunk = 2048;
	if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags))
		chunk = 65536;
	if (count < chunk)
		chunk = count;

	/* write_buf/write_cnt is protected by the atomic_write_lock mutex */
	if (tty->write_cnt < chunk) {
		unsigned char *buf;

		if (chunk < 1024)
			chunk = 1024;

		buf = kmalloc(chunk, GFP_KERNEL);
		if (!buf) {
			ret = -ENOMEM;
			goto out;
		}
		kfree(tty->write_buf);
		tty->write_cnt = chunk;
		tty->write_buf = buf;
	}

	/* Do the write .. */
	for (;;) {
		size_t size = count;
		if (size > chunk)
			size = chunk;
		ret = -EFAULT;
		if (copy_from_user(tty->write_buf, buf, size))
			break;
		ret = write(tty, file, tty->write_buf, size);
		if (ret <= 0)
			break;
		written += ret;
		buf += ret;
		count -= ret;
		if (!count)
			break;
		ret = -ERESTARTSYS;
		if (signal_pending(current))
			break;
		cond_resched();
	}
	if (written) {
		struct inode *inode = file->f_path.dentry->d_inode;
		inode->i_mtime = current_fs_time(inode->i_sb);
		ret = written;
	}
out:
	tty_write_unlock(tty);
	return ret;
}


/**
 *	tty_write		-	write method for tty device file
 *	@file: tty file pointer
 *	@buf: user data to write
 *	@count: bytes to write
 *	@ppos: unused
 *
 *	Write data to a tty device via the line discipline.
 *
 *	Locking:
 *		Locks the line discipline as required
 *		Writes to the tty driver are serialized by the atomic_write_lock
 *	and are then processed in chunks to the device. The line discipline
 *	write method will not be involked in parallel for each device
 *		The line discipline write method is called under the big
 *	kernel lock for historical reasons. New code should not rely on this.
 */

static ssize_t tty_write(struct file *file, const char __user *buf,
						size_t count, loff_t *ppos)
{
	struct tty_struct *tty;
	struct inode *inode = file->f_path.dentry->d_inode;
	ssize_t ret;
	struct tty_ldisc *ld;

	tty = (struct tty_struct *)file->private_data;
	if (tty_paranoia_check(tty, inode, "tty_write"))
		return -EIO;
	if (!tty || !tty->ops->write ||
		(test_bit(TTY_IO_ERROR, &tty->flags)))
			return -EIO;
	/* Short term debug to catch buggy drivers */
	if (tty->ops->write_room == NULL)
		printk(KERN_ERR "tty driver %s lacks a write_room method.\n",
			tty->driver->name);
	ld = tty_ldisc_ref_wait(tty);
	if (!ld->ops->write)
		ret = -EIO;
	else
		ret = do_tty_write(ld->ops->write, tty, file, buf, count);
	tty_ldisc_deref(ld);
	return ret;
}

ssize_t redirected_tty_write(struct file *file, const char __user *buf,
						size_t count, loff_t *ppos)
{
	struct file *p = NULL;

	spin_lock(&redirect_lock);
	if (redirect) {
		get_file(redirect);
		p = redirect;
	}
	spin_unlock(&redirect_lock);

	if (p) {
		ssize_t res;
		res = vfs_write(p, buf, count, &p->f_pos);
		fput(p);
		return res;
	}
	return tty_write(file, buf, count, ppos);
}

void tty_port_init(struct tty_port *port)
{
	memset(port, 0, sizeof(*port));
	init_waitqueue_head(&port->open_wait);
	init_waitqueue_head(&port->close_wait);
	mutex_init(&port->mutex);
	port->close_delay = (50 * HZ) / 100;
	port->closing_wait = (3000 * HZ) / 100;
}
EXPORT_SYMBOL(tty_port_init);

int tty_port_alloc_xmit_buf(struct tty_port *port)
{
	/* We may sleep in get_zeroed_page() */
	mutex_lock(&port->mutex);
	if (port->xmit_buf == NULL)
		port->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
	mutex_unlock(&port->mutex);
	if (port->xmit_buf == NULL)
		return -ENOMEM;
	return 0;
}
EXPORT_SYMBOL(tty_port_alloc_xmit_buf);

void tty_port_free_xmit_buf(struct tty_port *port)
{
	mutex_lock(&port->mutex);
	if (port->xmit_buf != NULL) {
		free_page((unsigned long)port->xmit_buf);
		port->xmit_buf = NULL;
	}
	mutex_unlock(&port->mutex);
}
EXPORT_SYMBOL(tty_port_free_xmit_buf);


static char ptychar[] = "pqrstuvwxyzabcde";

/**
 *	pty_line_name	-	generate name for a pty
 *	@driver: the tty driver in use
 *	@index: the minor number
 *	@p: output buffer of at least 6 bytes
 *
 *	Generate a name from a driver reference and write it to the output
 *	buffer.
 *
 *	Locking: None
 */
static void pty_line_name(struct tty_driver *driver, int index, char *p)
{
	int i = index + driver->name_base;
	/* ->name is initialized to "ttyp", but "tty" is expected */
	sprintf(p, "%s%c%x",
		driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name,
		ptychar[i >> 4 & 0xf], i & 0xf);
}

/**
 *	pty_line_name	-	generate name for a tty
 *	@driver: the tty driver in use
 *	@index: the minor number
 *	@p: output buffer of at least 7 bytes
 *
 *	Generate a name from a driver reference and write it to the output
 *	buffer.
 *
 *	Locking: None
 */
static void tty_line_name(struct tty_driver *driver, int index, char *p)
{
	sprintf(p, "%s%d", driver->name, index + driver->name_base);
}

/**
 *	init_dev		-	initialise a tty device
 *	@driver: tty driver we are opening a device on
 *	@idx: device index
 *	@tty: returned tty structure
 *
 *	Prepare a tty device. This may not be a "new" clean device but
 *	could also be an active device. The pty drivers require special
 *	handling because of this.
 *
 *	Locking:
 *		The function is called under the tty_mutex, which
 *	protects us from the tty struct or driver itself going away.
 *
 *	On exit the tty device has the line discipline attached and
 *	a reference count of 1. If a pair was created for pty/tty use
 *	and the other was a pty master then it too has a reference count of 1.
 *
 * WSH 06/09/97: Rewritten to remove races and properly clean up after a
 * failed open.  The new code protects the open with a mutex, so it's
 * really quite straightforward.  The mutex locking can probably be
 * relaxed for the (most common) case of reopening a tty.
 */

static int init_dev(struct tty_driver *driver, int idx,
	struct tty_struct **ret_tty)
{
	struct tty_struct *tty, *o_tty;
	struct ktermios *tp, **tp_loc, *o_tp, **o_tp_loc;
	struct ktermios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
	int retval = 0;
	struct tty_ldisc *ld;

	/* check whether we're reopening an existing tty */
	if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
		tty = devpts_get_tty(idx);
		/*
		 * If we don't have a tty here on a slave open, it's because
		 * the master already started the close process and there's
		 * no relation between devpts file and tty anymore.
		 */
		if (!tty && driver->subtype == PTY_TYPE_SLAVE) {
			retval = -EIO;
			goto end_init;
		}
		/*
		 * It's safe from now on because init_dev() is called with
		 * tty_mutex held and release_dev() won't change tty->count
		 * or tty->flags without having to grab tty_mutex
		 */
		if (tty && driver->subtype == PTY_TYPE_MASTER)
			tty = tty->link;
	} else {
		tty = driver->ttys[idx];
	}
	if (tty) goto fast_track;

	/*
	 * First time open is complex, especially for PTY devices.
	 * This code guarantees that either everything succeeds and the
	 * TTY is ready for operation, or else the table slots are vacated
	 * and the allocated memory released.  (Except that the termios
	 * and locked termios may be retained.)
	 */

	if (!try_module_get(driver->owner)) {
		retval = -ENODEV;
		goto end_init;
	}

	o_tty = NULL;
	tp = o_tp = NULL;
	ltp = o_ltp = NULL;

	tty = alloc_tty_struct();
	if (!tty)
		goto fail_no_mem;
	initialize_tty_struct(tty);
	tty->driver = driver;
	tty->ops = driver->ops;
	tty->index = idx;
	tty_line_name(driver, idx, tty->name);

	if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
		tp_loc = &tty->termios;
		ltp_loc = &tty->termios_locked;
	} else {
		tp_loc = &driver->termios[idx];
		ltp_loc = &driver->termios_locked[idx];
	}

	if (!*tp_loc) {
		tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
		if (!tp)
			goto free_mem_out;
		*tp = driver->init_termios;
	}

	if (!*ltp_loc) {
		ltp = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
		if (!ltp)
			goto free_mem_out;
	}

	if (driver->type == TTY_DRIVER_TYPE_PTY) {
		o_tty = alloc_tty_struct();
		if (!o_tty)
			goto free_mem_out;
		initialize_tty_struct(o_tty);
		o_tty->driver = driver->other;
		o_tty->ops = driver->ops;
		o_tty->index = idx;
		tty_line_name(driver->other, idx, o_tty->name);

		if (driver->flags & TTY_DRIVER_DEVPTS_MEM) {
			o_tp_loc = &o_tty->termios;
			o_ltp_loc = &o_tty->termios_locked;
		} else {
			o_tp_loc = &driver->other->termios[idx];
			o_ltp_loc = &driver->other->termios_locked[idx];
		}

		if (!*o_tp_loc) {
			o_tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
			if (!o_tp)
				goto free_mem_out;
			*o_tp = driver->other->init_termios;
		}

		if (!*o_ltp_loc) {
			o_ltp = kzalloc(sizeof(struct ktermios), GFP_KERNEL);
			if (!o_ltp)
				goto free_mem_out;
		}

		/*
		 * Everything allocated ... set up the o_tty structure.
		 */
		if (!(driver->other->flags & TTY_DRIVER_DEVPTS_MEM))
			driver->other->ttys[idx] = o_tty;
		if (!*o_tp_loc)
			*o_tp_loc = o_tp;
		if (!*o_ltp_loc)
			*o_ltp_loc = o_ltp;
		o_tty->termios = *o_tp_loc;
		o_tty->termios_locked = *o_ltp_loc;
		driver->other->refcount++;
		if (driver->subtype == PTY_TYPE_MASTER)
			o_tty->count++;

		/* Establish the links in both directions */
		tty->link   = o_tty;
		o_tty->link = tty;
	}

	/*
	 * All structures have been allocated, so now we install them.
	 * Failures after this point use release_tty to clean up, so
	 * there's no need to null out the local pointers.
	 */
	if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM))
		driver->ttys[idx] = tty;

	if (!*tp_loc)
		*tp_loc = tp;
	if (!*ltp_loc)
		*ltp_loc = ltp;
	tty->termios = *tp_loc;
	tty->termios_locked = *ltp_loc;
	/* Compatibility until drivers always set this */
	tty->termios->c_ispeed = tty_termios_input_baud_rate(tty->termios);
	tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
	driver->refcount++;
	tty->count++;

	/*
	 * Structures all installed ... call the ldisc open routines.
	 * If we fail here just call release_tty to clean up.  No need
	 * to decrement the use counts, as release_tty doesn't care.
	 */
	 
	ld = &tty->ldisc;

	if (ld->ops->open) {
		retval = (ld->ops->open)(tty);
		if (retval)
			goto release_mem_out;
	}
	if (o_tty && o_tty->ldisc.ops->open) {
		retval = (o_tty->ldisc.ops->open)(o_tty);
		if (retval) {
			if (ld->ops->close)
				(ld->ops->close)(tty);
			goto release_mem_out;
		}
		tty_ldisc_enable(o_tty);
	}
	tty_ldisc_enable(tty);
	goto success;

	/*
	 * This fast open can be used if the tty is already open.
	 * No memory is allocated, and the only failures are from
	 * attempting to open a closing tty or attempting multiple
	 * opens on a pty master.
	 */
fast_track:
	if (test_bit(TTY_CLOSING, &tty->flags)) {
		retval = -EIO;
		goto end_init;
	}
	if (driver->type == TTY_DRIVER_TYPE_PTY &&
	    driver->subtype == PTY_TYPE_MASTER) {
		/*
		 * special case for PTY masters: only one open permitted,
		 * and the slave side open count is incremented as well.
		 */
		if (tty->count) {
			retval = -EIO;
			goto end_init;
		}
		tty->link->count++;
	}
	tty->count++;
	tty->driver = driver; /* N.B. why do this every time?? */

	/* FIXME */
	if (!test_bit(TTY_LDISC, &tty->flags))
		printk(KERN_ERR "init_dev but no ldisc\n");
success:
	*ret_tty = tty;

	/* All paths come through here to release the mutex */
end_init:
	return retval;

	/* Release locally allocated memory ... nothing placed in slots */
free_mem_out:
	kfree(o_tp);
	if (o_tty)
		free_tty_struct(o_tty);
	kfree(ltp);
	kfree(tp);
	free_tty_struct(tty);

fail_no_mem:
	module_put(driver->owner);
	retval = -ENOMEM;
	goto end_init;

	/* call the tty release_tty routine to clean out this slot */
release_mem_out:
	if (printk_ratelimit())
		printk(KERN_INFO "init_dev: ldisc open failed, "
				 "clearing slot %d\n", idx);
	release_tty(tty, idx);
	goto end_init;
}

/**
 *	release_one_tty		-	release tty structure memory
 *
 *	Releases memory associated with a tty structure, and clears out the
 *	driver table slots. This function is called when a device is no longer
 *	in use. It also gets called when setup of a device fails.
 *
 *	Locking:
 *		tty_mutex - sometimes only
 *		takes the file list lock internally when working on the list
 *	of ttys that the driver keeps.
 *		FIXME: should we require tty_mutex is held here ??
 */
static void release_one_tty(struct tty_struct *tty, int idx)
{
	int devpts = tty->driver->flags & TTY_DRIVER_DEVPTS_MEM;
	struct ktermios *tp;

	if (!devpts)
		tty->driver->ttys[idx] = NULL;

	if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
		tp = tty->termios;
		if (!devpts)
			tty->driver->termios[idx] = NULL;
		kfree(tp);

		tp = tty->termios_locked;
		if (!devpts)
			tty->driver->termios_locked[idx] = NULL;
		kfree(tp);
	}


	tty->magic = 0;
	tty->driver->refcount--;

	file_list_lock();
	list_del_init(&tty->tty_files);
	file_list_unlock();

	free_tty_struct(tty);
}

/**
 *	release_tty		-	release tty structure memory
 *
 *	Release both @tty and a possible linked partner (think pty pair),
 *	and decrement the refcount of the backing module.
 *
 *	Locking:
 *		tty_mutex - sometimes only
 *		takes the file list lock internally when working on the list
 *	of ttys that the driver keeps.
 *		FIXME: should we require tty_mutex is held here ??
 */
static void release_tty(struct tty_struct *tty, int idx)
{
	struct tty_driver *driver = tty->driver;

	if (tty->link)
		release_one_tty(tty->link, idx);
	release_one_tty(tty, idx);
	module_put(driver->owner);
}

/*
 * Even releasing the tty structures is a tricky business.. We have
 * to be very careful that the structures are all released at the
 * same time, as interrupts might otherwise get the wrong pointers.
 *
 * WSH 09/09/97: rewritten to avoid some nasty race conditions that could
 * lead to double frees or releasing memory still in use.
 */
static void release_dev(struct file *filp)
{
	struct tty_struct *tty, *o_tty;
	struct tty_ldisc ld;
	int	pty_master, tty_closing, o_tty_closing, do_sleep;
	int	devpts;
	int	idx;
	char	buf[64];
	unsigned long flags;

	tty = (struct tty_struct *)filp->private_data;
	if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode,
							"release_dev"))
		return;

	check_tty_count(tty, "release_dev");

	tty_fasync(-1, filp, 0);

	idx = tty->index;
	pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
		      tty->driver->subtype == PTY_TYPE_MASTER);
	devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0;
	o_tty = tty->link;

#ifdef TTY_PARANOIA_CHECK
	if (idx < 0 || idx >= tty->driver->num) {
		printk(KERN_DEBUG "release_dev: bad idx when trying to "
				  "free (%s)\n", tty->name);
		return;
	}
	if (!(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
		if (tty != tty->driver->ttys[idx]) {
			printk(KERN_DEBUG "release_dev: driver.table[%d] not tty "
			       "for (%s)\n", idx, tty->name);
			return;
		}
		if (tty->termios != tty->driver->termios[idx]) {
			printk(KERN_DEBUG "release_dev: driver.termios[%d] not termios "
			       "for (%s)\n",
			       idx, tty->name);
			return;
		}
		if (tty->termios_locked != tty->driver->termios_locked[idx]) {
			printk(KERN_DEBUG "release_dev: driver.termios_locked[%d] not "
			       "termios_locked for (%s)\n",
			       idx, tty->name);
			return;
		}
	}
#endif

#ifdef TTY_DEBUG_HANGUP
	printk(KERN_DEBUG "release_dev of %s (tty count=%d)...",
	       tty_name(tty, buf), tty->count);
#endif

#ifdef TTY_PARANOIA_CHECK
	if (tty->driver->other &&
	     !(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) {
		if (o_tty != tty->driver->other->ttys[idx]) {
			printk(KERN_DEBUG "release_dev: other->table[%d] "
					  "not o_tty for (%s)\n",
			       idx, tty->name);
			return;
		}
		if (o_tty->termios != tty->driver->other->termios[idx]) {
			printk(KERN_DEBUG "release_dev: other->termios[%d] "
					  "not o_termios for (%s)\n",
			       idx, tty->name);
			return;
		}
		if (o_tty->termios_locked !=
		      tty->driver->other->termios_locked[idx]) {
			printk(KERN_DEBUG "release_dev: other->termios_locked["
					  "%d] not o_termios_locked for (%s)\n",
			       idx, tty->name);
			return;
		}
		if (o_tty->link != tty) {
			printk(KERN_DEBUG "release_dev: bad pty pointers\n");
			return;
		}
	}
#endif
	if (tty->ops->close)
		tty->ops->close(tty, filp);

	/*
	 * Sanity check: if tty->count is going to zero, there shouldn't be
	 * any waiters on tty->read_wait or tty->write_wait.  We test the
	 * wait queues and kick everyone out _before_ actually starting to
	 * close.  This ensures that we won't block while releasing the tty
	 * structure.
	 *
	 * The test for the o_tty closing is necessary, since the master and
	 * slave sides may close in any order.  If the slave side closes out
	 * first, its count will be one, since the master side holds an open.
	 * Thus this test wouldn't be triggered at the time the slave closes,
	 * so we do it now.
	 *
	 * Note that it's possible for the tty to be opened again while we're
	 * flushing out waiters.  By recalculating the closing flags before
	 * each iteration we avoid any problems.
	 */
	while (1) {
		/* Guard against races with tty->count changes elsewhere and
		   opens on /dev/tty */

		mutex_lock(&tty_mutex);
		tty_closing = tty->count <= 1;
		o_tty_closing = o_tty &&
			(o_tty->count <= (pty_master ? 1 : 0));
		do_sleep = 0;

		if (tty_closing) {
			if (waitqueue_active(&tty->read_wait)) {
				wake_up(&tty->read_wait);
				do_sleep++;
			}
			if (waitqueue_active(&tty->write_wait)) {
				wake_up(&tty->write_wait);
				do_sleep++;
			}
		}
		if (o_tty_closing) {
			if (waitqueue_active(&o_tty->read_wait)) {
				wake_up(&o_tty->read_wait);
				do_sleep++;
			}
			if (waitqueue_active(&o_tty->write_wait)) {
				wake_up(&o_tty->write_wait);
				do_sleep++;
			}
		}
		if (!do_sleep)
			break;

		printk(KERN_WARNING "release_dev: %s: read/write wait queue "
				    "active!\n", tty_name(tty, buf));
		mutex_unlock(&tty_mutex);
		schedule();
	}

	/*
	 * The closing flags are now consistent with the open counts on
	 * both sides, and we've completed the last operation that could
	 * block, so it's safe to proceed with closing.
	 */
	if (pty_master) {
		if (--o_tty->count < 0) {
			printk(KERN_WARNING "release_dev: bad pty slave count "
					    "(%d) for %s\n",
			       o_tty->count, tty_name(o_tty, buf));
			o_tty->count = 0;
		}
	}
	if (--tty->count < 0) {
		printk(KERN_WARNING "release_dev: bad tty->count (%d) for %s\n",
		       tty->count, tty_name(tty, buf));
		tty->count = 0;
	}

	/*
	 * We've decremented tty->count, so we need to remove this file
	 * descriptor off the tty->tty_files list; this serves two
	 * purposes:
	 *  - check_tty_count sees the correct number of file descriptors
	 *    associated with this tty.
	 *  - do_tty_hangup no longer sees this file descriptor as
	 *    something that needs to be handled for hangups.
	 */
	file_kill(filp);
	filp->private_data = NULL;

	/*
	 * Perform some housekeeping before deciding whether to return.
	 *
	 * Set the TTY_CLOSING flag if this was the last open.  In the
	 * case of a pty we may have to wait around for the other side
	 * to close, and TTY_CLOSING makes sure we can't be reopened.
	 */
	if (tty_closing)
		set_bit(TTY_CLOSING, &tty->flags);
	if (o_tty_closing)
		set_bit(TTY_CLOSING, &o_tty->flags);

	/*
	 * If _either_ side is closing, make sure there aren't any
	 * processes that still think tty or o_tty is their controlling
	 * tty.
	 */
	if (tty_closing || o_tty_closing) {
		read_lock(&tasklist_lock);
		session_clear_tty(tty->session);
		if (o_tty)
			session_clear_tty(o_tty->session);
		read_unlock(&tasklist_lock);
	}

	mutex_unlock(&tty_mutex);

	/* check whether both sides are closing ... */
	if (!tty_closing || (o_tty && !o_tty_closing))
		return;

#ifdef TTY_DEBUG_HANGUP
	printk(KERN_DEBUG "freeing tty structure...");
#endif
	/*
	 * Prevent flush_to_ldisc() from rescheduling the work for later.  Then
	 * kill any delayed work. As this is the final close it does not
	 * race with the set_ldisc code path.
	 */
	clear_bit(TTY_LDISC, &tty->flags);
	cancel_delayed_work(&tty->buf.work);

	/*
	 * Wait for ->hangup_work and ->buf.work handlers to terminate
	 */

	flush_scheduled_work();

	/*
	 * Wait for any short term users (we know they are just driver
	 * side waiters as the file is closing so user count on the file
	 * side is zero.
	 */
	spin_lock_irqsave(&tty_ldisc_lock, flags);
	while (tty->ldisc.refcount) {
		spin_unlock_irqrestore(&tty_ldisc_lock, flags);
		wait_event(tty_ldisc_wait, tty->ldisc.refcount == 0);
		spin_lock_irqsave(&tty_ldisc_lock, flags);
	}
	spin_unlock_irqrestore(&tty_ldisc_lock, flags);
	/*
	 * Shutdown the current line discipline, and reset it to N_TTY.
	 *
	 * FIXME: this MUST get fixed for the new reflocking
	 */
	if (tty->ldisc.ops->close)
		(tty->ldisc.ops->close)(tty);
	tty_ldisc_put(tty->ldisc.ops);

	/*
	 *	Switch the line discipline back
	 */
	WARN_ON(tty_ldisc_get(N_TTY, &ld));
	tty_ldisc_assign(tty, &ld);
	tty_set_termios_ldisc(tty, N_TTY);
	if (o_tty) {
		/* FIXME: could o_tty be in setldisc here ? */
		clear_bit(TTY_LDISC, &o_tty->flags);
		if (o_tty->ldisc.ops->close)
			(o_tty->ldisc.ops->close)(o_tty);
		tty_ldisc_put(o_tty->ldisc.ops);
		WARN_ON(tty_ldisc_get(N_TTY, &ld));
		tty_ldisc_assign(o_tty, &ld);
		tty_set_termios_ldisc(o_tty, N_TTY);
	}
	/*
	 * The release_tty function takes care of the details of clearing
	 * the slots and preserving the termios structure.
	 */
	release_tty(tty, idx);

	/* Make this pty number available for reallocation */
	if (devpts)
		devpts_kill_index(idx);
}

/**
 *	tty_open		-	open a tty device
 *	@inode: inode of device file
 *	@filp: file pointer to tty
 *
 *	tty_open and tty_release keep up the tty count that contains the
 *	number of opens done on a tty. We cannot use the inode-count, as
 *	different inodes might point to the same tty.
 *
 *	Open-counting is needed for pty masters, as well as for keeping
 *	track of serial lines: DTR is dropped when the last close happens.
 *	(This is not done solely through tty->count, now.  - Ted 1/27/92)
 *
 *	The termios state of a pty is reset on first open so that
 *	settings don't persist across reuse.
 *
 *	Locking: tty_mutex protects tty, get_tty_driver and init_dev work.
 *		 tty->count should protect the rest.
 *		 ->siglock protects ->signal/->sighand
 */

static int __tty_open(struct inode *inode, struct file *filp)
{
	struct tty_struct *tty;
	int noctty, retval;
	struct tty_driver *driver;
	int index;
	dev_t device = inode->i_rdev;
	unsigned short saved_flags = filp->f_flags;

	nonseekable_open(inode, filp);

retry_open:
	noctty = filp->f_flags & O_NOCTTY;
	index  = -1;
	retval = 0;

	mutex_lock(&tty_mutex);

	if (device == MKDEV(TTYAUX_MAJOR, 0)) {
		tty = get_current_tty();
		if (!tty) {
			mutex_unlock(&tty_mutex);
			return -ENXIO;
		}
		driver = tty->driver;
		index = tty->index;
		filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
		/* noctty = 1; */
		goto got_driver;
	}
#ifdef CONFIG_VT
	if (device == MKDEV(TTY_MAJOR, 0)) {
		extern struct tty_driver *console_driver;
		driver = console_driver;
		index = fg_console;
		noctty = 1;
		goto got_driver;
	}
#endif
	if (device == MKDEV(TTYAUX_MAJOR, 1)) {
		driver = console_device(&index);
		if (driver) {
			/* Don't let /dev/console block */
			filp->f_flags |= O_NONBLOCK;
			noctty = 1;
			goto got_driver;
		}
		mutex_unlock(&tty_mutex);
		return -ENODEV;
	}

	driver = get_tty_driver(device, &index);
	if (!driver) {
		mutex_unlock(&tty_mutex);
		return -ENODEV;
	}
got_driver:
	retval = init_dev(driver, index, &tty);
	mutex_unlock(&tty_mutex);
	if (retval)
		return retval;

	filp->private_data = tty;
	file_move(filp, &tty->tty_files);
	check_tty_count(tty, "tty_open");
	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
	    tty->driver->subtype == PTY_TYPE_MASTER)
		noctty = 1;
#ifdef TTY_DEBUG_HANGUP
	printk(KERN_DEBUG "opening %s...", tty->name);
#endif
	if (!retval) {
		if (tty->ops->open)
			retval = tty->ops->open(tty, filp);
		else
			retval = -ENODEV;
	}
	filp->f_flags = saved_flags;

	if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) &&
						!capable(CAP_SYS_ADMIN))
		retval = -EBUSY;

	if (retval) {
#ifdef TTY_DEBUG_HANGUP
		printk(KERN_DEBUG "error %d in opening %s...", retval,
		       tty->name);
#endif
		release_dev(filp);
		if (retval != -ERESTARTSYS)
			return retval;
		if (signal_pending(current))
			return retval;
		schedule();
		/*
		 * Need to reset f_op in case a hangup happened.
		 */
		if (filp->f_op == &hung_up_tty_fops)
			filp->f_op = &tty_fops;
		goto retry_open;
	}

	mutex_lock(&tty_mutex);
	spin_lock_irq(&current->sighand->siglock);
	if (!noctty &&
	    current->signal->leader &&
	    !current->signal->tty &&
	    tty->session == NULL)
		__proc_set_tty(current, tty);
	spin_unlock_irq(&current->sighand->siglock);
	mutex_unlock(&tty_mutex);
	return 0;
}

/* BKL pushdown: scary code avoidance wrapper */
static int tty_open(struct inode *inode, struct file *filp)
{
	int ret;

	lock_kernel();
	ret = __tty_open(inode, filp);
	unlock_kernel();
	return ret;
}



#ifdef CONFIG_UNIX98_PTYS
/**
 *	ptmx_open		-	open a unix 98 pty master
 *	@inode: inode of device file
 *	@filp: file pointer to tty
 *
 *	Allocate a unix98 pty master device from the ptmx driver.
 *
 *	Locking: tty_mutex protects theinit_dev work. tty->count should
 * 		protect the rest.
 *		allocated_ptys_lock handles the list of free pty numbers
 */

static int __ptmx_open(struct inode *inode, struct file *filp)
{
	struct tty_struct *tty;
	int retval;
	int index;

	nonseekable_open(inode, filp);

	/* find a device that is not in use. */
	index = devpts_new_index();
	if (index < 0)
		return index;

	mutex_lock(&tty_mutex);
	retval = init_dev(ptm_driver, index, &tty);
	mutex_unlock(&tty_mutex);

	if (retval)
		goto out;

	set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
	filp->private_data = tty;
	file_move(filp, &tty->tty_files);

	retval = devpts_pty_new(tty->link);
	if (retval)
		goto out1;

	check_tty_count(tty, "ptmx_open");
	retval = ptm_driver->ops->open(tty, filp);
	if (!retval)
		return 0;
out1:
	release_dev(filp);
	return retval;
out:
	devpts_kill_index(index);
	return retval;
}

static int ptmx_open(struct inode *inode, struct file *filp)
{
	int ret;

	lock_kernel();
	ret = __ptmx_open(inode, filp);
	unlock_kernel();
	return ret;
}
#endif

/**
 *	tty_release		-	vfs callback for close
 *	@inode: inode of tty
 *	@filp: file pointer for handle to tty
 *
 *	Called the last time each file handle is closed that references
 *	this tty. There may however be several such references.
 *
 *	Locking:
 *		Takes bkl. See release_dev
 */

static int tty_release(struct inode *inode, struct file *filp)
{
	lock_kernel();
	release_dev(filp);
	unlock_kernel();
	return 0;
}

/**
 *	tty_poll	-	check tty status
 *	@filp: file being polled
 *	@wait: poll wait structures to update
 *
 *	Call the line discipline polling method to obtain the poll
 *	status of the device.
 *
 *	Locking: locks called line discipline but ldisc poll method
 *	may be re-entered freely by other callers.
 */

static unsigned int tty_poll(struct file *filp, poll_table *wait)
{
	struct tty_struct *tty;
	struct tty_ldisc *ld;
	int ret = 0;

	tty = (struct tty_struct *)filp->private_data;
	if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_poll"))
		return 0;

	ld = tty_ldisc_ref_wait(tty);
	if (ld->ops->poll)
		ret = (ld->ops->poll)(tty, filp, wait);
	tty_ldisc_deref(ld);
	return ret;
}

static int tty_fasync(int fd, struct file *filp, int on)
{
	struct tty_struct *tty;
	unsigned long flags;
	int retval = 0;

	lock_kernel();
	tty = (struct tty_struct *)filp->private_data;
	if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync"))
		goto out;

	retval = fasync_helper(fd, filp, on, &tty->fasync);
	if (retval <= 0)
		goto out;

	if (on) {
		enum pid_type type;
		struct pid *pid;
		if (!waitqueue_active(&tty->read_wait))
			tty->minimum_to_wake = 1;
		spin_lock_irqsave(&tty->ctrl_lock, flags);
		if (tty->pgrp) {
			pid = tty->pgrp;
			type = PIDTYPE_PGID;
		} else {
			pid = task_pid(current);
			type = PIDTYPE_PID;
		}
		spin_unlock_irqrestore(&tty->ctrl_lock, flags);
		retval = __f_setown(filp, pid, type, 0);
		if (retval)
			goto out;
	} else {
		if (!tty->fasync && !waitqueue_active(&tty->read_wait))
			tty->minimum_to_wake = N_TTY_BUF_SIZE;
	}
	retval = 0;
out:
	unlock_kernel();
	return retval;
}

/**
 *	tiocsti			-	fake input character
 *	@tty: tty to fake input into
 *	@p: pointer to character
 *
 *	Fake input to a tty device. Does the necessary locking and
 *	input management.
 *
 *	FIXME: does not honour flow control ??
 *
 *	Locking:
 *		Called functions take tty_ldisc_lock
 *		current->signal->tty check is safe without locks
 *
 *	FIXME: may race normal receive processing
 */

static int tiocsti(struct tty_struct *tty, char __user *p)
{
	char ch, mbz = 0;
	struct tty_ldisc *ld;

	if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))
		return -EPERM;
	if (get_user(ch, p))
		return -EFAULT;
	ld = tty_ldisc_ref_wait(tty);
	ld->ops->receive_buf(tty, &ch, &mbz, 1);
	tty_ldisc_deref(ld);
	return 0;
}

/**
 *	tiocgwinsz		-	implement window query ioctl
 *	@tty; tty
 *	@arg: user buffer for result
 *
 *	Copies the kernel idea of the window size into the user buffer.
 *
 *	Locking: tty->termios_mutex is taken to ensure the winsize data
 *		is consistent.
 */

static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
{
	int err;

	mutex_lock(&tty->termios_mutex);
	err = copy_to_user(arg, &tty->winsize, sizeof(*arg));
	mutex_unlock(&tty->termios_mutex);

	return err ? -EFAULT: 0;
}

/**
 *	tiocswinsz		-	implement window size set ioctl
 *	@tty; tty
 *	@arg: user buffer for result
 *
 *	Copies the user idea of the window size to the kernel. Traditionally
 *	this is just advisory information but for the Linux console it
 *	actually has driver level meaning and triggers a VC resize.
 *
 *	Locking:
 *		Called function use the console_sem is used to ensure we do
 *	not try and resize the console twice at once.
 *		The tty->termios_mutex is used to ensure we don't double
 *	resize and get confused. Lock order - tty->termios_mutex before
 *	console sem
 */

static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
	struct winsize __user *arg)
{
	struct winsize tmp_ws;
	struct pid *pgrp, *rpgrp;
	unsigned long flags;

	if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
		return -EFAULT;

	mutex_lock(&tty->termios_mutex);
	if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
		goto done;

#ifdef CONFIG_VT
	if (tty->driver->type == TTY_DRIVER_TYPE_CONSOLE) {
		if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col,
					tmp_ws.ws_row)) {
			mutex_unlock(&tty->termios_mutex);
			return -ENXIO;
		}
	}
#endif
	/* Get the PID values and reference them so we can
	   avoid holding the tty ctrl lock while sending signals */
	spin_lock_irqsave(&tty->ctrl_lock, flags);
	pgrp = get_pid(tty->pgrp);
	rpgrp = get_pid(real_tty->pgrp);
	spin_unlock_irqrestore(&tty->ctrl_lock, flags);

	if (pgrp)
		kill_pgrp(pgrp, SIGWINCH, 1);
	if (rpgrp != pgrp && rpgrp)
		kill_pgrp(rpgrp, SIGWINCH, 1);

	put_pid(pgrp);
	put_pid(rpgrp);

	tty->winsize = tmp_ws;
	real_tty->winsize = tmp_ws;
done:
	mutex_unlock(&tty->termios_mutex);
	return 0;
}

/**
 *	tioccons	-	allow admin to move logical console
 *	@file: the file to become console
 *
 *	Allow the adminstrator to move the redirected console device
 *
 *	Locking: uses redirect_lock to guard the redirect information
 */

static int tioccons(struct file *file)
{
	if (!capable(CAP_SYS_ADMIN))
		return -EPERM;
	if (file->f_op->write == redirected_tty_write) {
		struct file *f;
		spin_lock(&redirect_lock);
		f = redirect;
		redirect = NULL;
		spin_unlock(&redirect_lock);
		if (f)
			fput(f);
		return 0;
	}
	spin_lock(&redirect_lock);
	if (redirect) {
		spin_unlock(&redirect_lock);
		return -EBUSY;
	}
	get_file(file);
	redirect = file;
	spin_unlock(&redirect_lock);
	return 0;
}

/**
 *	fionbio		-	non blocking ioctl
 *	@file: file to set blocking value
 *	@p: user parameter
 *
 *	Historical tty interfaces had a blocking control ioctl before
 *	the generic functionality existed. This piece of history is preserved
 *	in the expected tty API of posix OS's.
 *
 *	Locking: none, the open fle handle ensures it won't go away.
 */

static int fionbio(struct file *file, int __user *p)
{
	int nonblock;

	if (get_user(nonblock, p))
		return -EFAULT;

	/* file->f_flags is still BKL protected in the fs layer - vomit */
	lock_kernel();
	if (nonblock)
		file->f_flags |= O_NONBLOCK;
	else
		file->f_flags &= ~O_NONBLOCK;
	unlock_kernel();
	return 0;
}

/**
 *	tiocsctty	-	set controlling tty
 *	@tty: tty structure
 *	@arg: user argument
 *
 *	This ioctl is used to manage job control. It permits a session
 *	leader to set this tty as the controlling tty for the session.
 *
 *	Locking:
 *		Takes tty_mutex() to protect tty instance
 *		Takes tasklist_lock internally to walk sessions
 *		Takes ->siglock() when updating signal->tty
 */

static int tiocsctty(struct tty_struct *tty, int arg)
{
	int ret = 0;
	if (current->signal->leader && (task_session(current) == tty->session))
		return ret;

	mutex_lock(&tty_mutex);
	/*
	 * The process must be a session leader and
	 * not have a controlling tty already.
	 */
	if (!current->signal->leader || current->signal->tty) {
		ret = -EPERM;
		goto unlock;
	}

	if (tty->session) {
		/*
		 * This tty is already the controlling
		 * tty for another session group!
		 */
		if (arg == 1 && capable(CAP_SYS_ADMIN)) {
			/*
			 * Steal it away
			 */
			read_lock(&tasklist_lock);
			session_clear_tty(tty->session);
			read_unlock(&tasklist_lock);
		} else {
			ret = -EPERM;
			goto unlock;
		}
	}
	proc_set_tty(current, tty);
unlock:
	mutex_unlock(&tty_mutex);
	return ret;
}

/**
 *	tty_get_pgrp	-	return a ref counted pgrp pid
 *	@tty: tty to read
 *
 *	Returns a refcounted instance of the pid struct for the process
 *	group controlling the tty.
 */

struct pid *tty_get_pgrp(struct tty_struct *tty)
{
	unsigned long flags;
	struct pid *pgrp;

	spin_lock_irqsave(&tty->ctrl_lock, flags);
	pgrp = get_pid(tty->pgrp);
	spin_unlock_irqrestore(&tty->ctrl_lock, flags);

	return pgrp;
}
EXPORT_SYMBOL_GPL(tty_get_pgrp);

/**
 *	tiocgpgrp		-	get process group
 *	@tty: tty passed by user
 *	@real_tty: tty side of the tty pased by the user if a pty else the tty
 *	@p: returned pid
 *
 *	Obtain the process group of the tty. If there is no process group
 *	return an error.
 *
 *	Locking: none. Reference to current->signal->tty is safe.
 */

static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
	struct pid *pid;
	int ret;
	/*
	 * (tty == real_tty) is a cheap way of
	 * testing if the tty is NOT a master pty.
	 */
	if (tty == real_tty && current->signal->tty != real_tty)
		return -ENOTTY;
	pid = tty_get_pgrp(real_tty);
	ret =  put_user(pid_vnr(pid), p);
	put_pid(pid);
	return ret;
}

/**
 *	tiocspgrp		-	attempt to set process group
 *	@tty: tty passed by user
 *	@real_tty: tty side device matching tty passed by user
 *	@p: pid pointer
 *
 *	Set the process group of the tty to the session passed. Only
 *	permitted where the tty session is our session.
 *
 *	Locking: RCU, ctrl lock
 */

static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
	struct pid *pgrp;
	pid_t pgrp_nr;
	int retval = tty_check_change(real_tty);
	unsigned long flags;

	if (retval == -EIO)
		return -ENOTTY;
	if (retval)
		return retval;
	if (!current->signal->tty ||
	    (current->signal->tty != real_tty) ||
	    (real_tty->session != task_session(current)))
		return -ENOTTY;
	if (get_user(pgrp_nr, p))
		return -EFAULT;
	if (pgrp_nr < 0)
		return -EINVAL;
	rcu_read_lock();
	pgrp = find_vpid(pgrp_nr);
	retval = -ESRCH;
	if (!pgrp)
		goto out_unlock;
	retval = -EPERM;
	if (session_of_pgrp(pgrp) != task_session(current))
		goto out_unlock;
	retval = 0;
	spin_lock_irqsave(&tty->ctrl_lock, flags);
	put_pid(real_tty->pgrp);
	real_tty->pgrp = get_pid(pgrp);
	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
out_unlock:
	rcu_read_unlock();
	return retval;
}

/**
 *	tiocgsid		-	get session id
 *	@tty: tty passed by user
 *	@real_tty: tty side of the tty pased by the user if a pty else the tty
 *	@p: pointer to returned session id
 *
 *	Obtain the session id of the tty. If there is no session
 *	return an error.
 *
 *	Locking: none. Reference to current->signal->tty is safe.
 */

static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
{
	/*
	 * (tty == real_tty) is a cheap way of
	 * testing if the tty is NOT a master pty.
	*/
	if (tty == real_tty && current->signal->tty != real_tty)
		return -ENOTTY;
	if (!real_tty->session)
		return -ENOTTY;
	return put_user(pid_vnr(real_tty->session), p);
}

/**
 *	tiocsetd	-	set line discipline
 *	@tty: tty device
 *	@p: pointer to user data
 *
 *	Set the line discipline according to user request.
 *
 *	Locking: see tty_set_ldisc, this function is just a helper
 */

static int tiocsetd(struct tty_struct *tty, int __user *p)
{
	int ldisc;
	int ret;

	if (get_user(ldisc, p))
		return -EFAULT;

	lock_kernel();
	ret = tty_set_ldisc(tty, ldisc);
	unlock_kernel();

	return ret;
}

/**
 *	send_break	-	performed time break
 *	@tty: device to break on
 *	@duration: timeout in mS
 *
 *	Perform a timed break on hardware that lacks its own driver level
 *	timed break functionality.
 *
 *	Locking:
 *		atomic_write_lock serializes
 *
 */

static int send_break(struct tty_struct *tty, unsigned int duration)
{
	if (tty_write_lock(tty, 0) < 0)
		return -EINTR;
	tty->ops->break_ctl(tty, -1);
	if (!signal_pending(current))
		msleep_interruptible(duration);
	tty->ops->break_ctl(tty, 0);
	tty_write_unlock(tty);
	if (signal_pending(current))
		return -EINTR;
	return 0;
}

/**
 *	tty_tiocmget		-	get modem status
 *	@tty: tty device
 *	@file: user file pointer
 *	@p: pointer to result
 *
 *	Obtain the modem status bits from the tty driver if the feature
 *	is supported. Return -EINVAL if it is not available.
 *
 *	Locking: none (up to the driver)
 */

static int tty_tiocmget(struct tty_struct *tty, struct file *file, int __user *p)
{
	int retval = -EINVAL;

	if (tty->ops->tiocmget) {
		retval = tty->ops->tiocmget(tty, file);

		if (retval >= 0)
			retval = put_user(retval, p);
	}
	return retval;
}

/**
 *	tty_tiocmset		-	set modem status
 *	@tty: tty device
 *	@file: user file pointer
 *	@cmd: command - clear bits, set bits or set all
 *	@p: pointer to desired bits
 *
 *	Set the modem status bits from the tty driver if the feature
 *	is supported. Return -EINVAL if it is not available.
 *
 *	Locking: none (up to the driver)
 */

static int tty_tiocmset(struct tty_struct *tty, struct file *file, unsigned int cmd,
	     unsigned __user *p)
{
	int retval;
	unsigned int set, clear, val;

	if (tty->ops->tiocmset == NULL)
		return -EINVAL;

	retval = get_user(val, p);
	if (retval)
		return retval;
	set = clear = 0;
	switch (cmd) {
	case TIOCMBIS:
		set = val;
		break;
	case TIOCMBIC:
		clear = val;
		break;
	case TIOCMSET:
		set = val;
		clear = ~val;
		break;
	}
	set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
	clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
	return tty->ops->tiocmset(tty, file, set, clear);
}

/*
 * Split this up, as gcc can choke on it otherwise..
 */
long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
	struct tty_struct *tty, *real_tty;
	void __user *p = (void __user *)arg;
	int retval;
	struct tty_ldisc *ld;
	struct inode *inode = file->f_dentry->d_inode;

	tty = (struct tty_struct *)file->private_data;
	if (tty_paranoia_check(tty, inode, "tty_ioctl"))
		return -EINVAL;

	real_tty = tty;
	if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
	    tty->driver->subtype == PTY_TYPE_MASTER)
		real_tty = tty->link;

	/*
	 * Break handling by driver
	 */

	retval = -EINVAL;

	if (!tty->ops->break_ctl) {
		switch (cmd) {
		case TIOCSBRK:
		case TIOCCBRK:
			if (tty->ops->ioctl)
				retval = tty->ops->ioctl(tty, file, cmd, arg);
			if (retval != -EINVAL && retval != -ENOIOCTLCMD)
				printk(KERN_WARNING "tty: driver %s needs updating to use break_ctl\n", tty->driver->name);
			return retval;

		/* These two ioctl's always return success; even if */
		/* the driver doesn't support them. */
		case TCSBRK:
		case TCSBRKP:
			if (!tty->ops->ioctl)
				return 0;
			retval = tty->ops->ioctl(tty, file, cmd, arg);
			if (retval != -EINVAL && retval != -ENOIOCTLCMD)
				printk(KERN_WARNING "tty: driver %s needs updating to use break_ctl\n", tty->driver->name);
			if (retval == -ENOIOCTLCMD)
				retval = 0;
			return retval;
		}
	}

	/*
	 * Factor out some common prep work
	 */
	switch (cmd) {
	case TIOCSETD:
	case TIOCSBRK:
	case TIOCCBRK:
	case TCSBRK:
	case TCSBRKP:
		retval = tty_check_change(tty);
		if (retval)
			return retval;
		if (cmd != TIOCCBRK) {
			tty_wait_until_sent(tty, 0);
			if (signal_pending(current))
				return -EINTR;
		}
		break;
	}

	switch (cmd) {
	case TIOCSTI:
		return tiocsti(tty, p);
	case TIOCGWINSZ:
		return tiocgwinsz(tty, p);
	case TIOCSWINSZ:
		return tiocswinsz(tty, real_tty, p);
	case TIOCCONS:
		return real_tty != tty ? -EINVAL : tioccons(file);
	case FIONBIO:
		return fionbio(file, p);
	case TIOCEXCL:
		set_bit(TTY_EXCLUSIVE, &tty->flags);
		return 0;
	case TIOCNXCL:
		clear_bit(TTY_EXCLUSIVE, &tty->flags);
		return 0;
	case TIOCNOTTY:
		if (current->signal->tty != tty)
			return -ENOTTY;
		no_tty();
		return 0;
	case TIOCSCTTY:
		return tiocsctty(tty, arg);
	case TIOCGPGRP:
		return tiocgpgrp(tty, real_tty, p);
	case TIOCSPGRP:
		return tiocspgrp(tty, real_tty, p);
	case TIOCGSID:
		return tiocgsid(tty, real_tty, p);
	case TIOCGETD:
		return put_user(tty->ldisc.ops->num, (int __user *)p);
	case TIOCSETD:
		return tiocsetd(tty, p);
#ifdef CONFIG_VT
	case TIOCLINUX:
		return tioclinux(tty, arg);
#endif
	/*
	 * Break handling
	 */
	case TIOCSBRK:	/* Turn break on, unconditionally */
		if (tty->ops->break_ctl)
			tty->ops->break_ctl(tty, -1);
		return 0;

	case TIOCCBRK:	/* Turn break off, unconditionally */
		if (tty->ops->break_ctl)
			tty->ops->break_ctl(tty, 0);
		return 0;
	case TCSBRK:   /* SVID version: non-zero arg --> no break */
		/* non-zero arg means wait for all output data
		 * to be sent (performed above) but don't send break.
		 * This is used by the tcdrain() termios function.
		 */
		if (!arg)
			return send_break(tty, 250);
		return 0;
	case TCSBRKP:	/* support for POSIX tcsendbreak() */
		return send_break(tty, arg ? arg*100 : 250);

	case TIOCMGET:
		return tty_tiocmget(tty, file, p);
	case TIOCMSET:
	case TIOCMBIC:
	case TIOCMBIS:
		return tty_tiocmset(tty, file, cmd, p);
	case TCFLSH:
		switch (arg) {
		case TCIFLUSH:
		case TCIOFLUSH:
		/* flush tty buffer and allow ldisc to process ioctl */
			tty_buffer_flush(tty);
			break;
		}
		break;
	}
	if (tty->ops->ioctl) {
		retval = (tty->ops->ioctl)(tty, file, cmd, arg);
		if (retval != -ENOIOCTLCMD)
			return retval;
	}
	ld = tty_ldisc_ref_wait(tty);
	retval = -EINVAL;
	if (ld->ops->ioctl) {
		retval = ld->ops->ioctl(tty, file, cmd, arg);
		if (retval == -ENOIOCTLCMD)
			retval = -EINVAL;
	}
	tty_ldisc_deref(ld);
	return retval;
}

#ifdef CONFIG_COMPAT
static long tty_compat_ioctl(struct file *file, unsigned int cmd,
				unsigned long arg)
{
	struct inode *inode = file->f_dentry->d_inode;
	struct tty_struct *tty = file->private_data;
	struct tty_ldisc *ld;
	int retval = -ENOIOCTLCMD;

	if (tty_paranoia_check(tty, inode, "tty_ioctl"))
		return -EINVAL;

	if (tty->ops->compat_ioctl) {
		retval = (tty->ops->compat_ioctl)(tty, file, cmd, arg);
		if (retval != -ENOIOCTLCMD)
			return retval;
	}

	ld = tty_ldisc_ref_wait(tty);
	if (ld->ops->compat_ioctl)
		retval = ld->ops->compat_ioctl(tty, file, cmd, arg);
	tty_ldisc_deref(ld);

	return retval;
}
#endif

/*
 * This implements the "Secure Attention Key" ---  the idea is to
 * prevent trojan horses by killing all processes associated with this
 * tty when the user hits the "Secure Attention Key".  Required for
 * super-paranoid applications --- see the Orange Book for more details.
 *
 * This code could be nicer; ideally it should send a HUP, wait a few
 * seconds, then send a INT, and then a KILL signal.  But you then
 * have to coordinate with the init process, since all processes associated
 * with the current tty must be dead before the new getty is allowed
 * to spawn.
 *
 * Now, if it would be correct ;-/ The current code has a nasty hole -
 * it doesn't catch files in flight. We may send the descriptor to ourselves
 * via AF_UNIX socket, close it and later fetch from socket. FIXME.
 *
 * Nasty bug: do_SAK is being called in interrupt context.  This can
 * deadlock.  We punt it up to process context.  AKPM - 16Mar2001
 */
void __do_SAK(struct tty_struct *tty)
{
#ifdef TTY_SOFT_SAK
	tty_hangup(tty);
#else
	struct task_struct *g, *p;
	struct pid *session;
	int		i;
	struct file	*filp;
	struct fdtable *fdt;

	if (!tty)
		return;
	session = tty->session;

	tty_ldisc_flush(tty);

	tty_driver_flush_buffer(tty);

	read_lock(&tasklist_lock);
	/* Kill the entire session */
	do_each_pid_task(session, PIDTYPE_SID, p) {
		printk(KERN_NOTICE "SAK: killed process %d"
			" (%s): task_session_nr(p)==tty->session\n",
			task_pid_nr(p), p->comm);
		send_sig(SIGKILL, p, 1);
	} while_each_pid_task(session, PIDTYPE_SID, p);
	/* Now kill any processes that happen to have the
	 * tty open.
	 */
	do_each_thread(g, p) {
		if (p->signal->tty == tty) {
			printk(KERN_NOTICE "SAK: killed process %d"
			    " (%s): task_session_nr(p)==tty->session\n",
			    task_pid_nr(p), p->comm);
			send_sig(SIGKILL, p, 1);
			continue;
		}
		task_lock(p);
		if (p->files) {
			/*
			 * We don't take a ref to the file, so we must
			 * hold ->file_lock instead.
			 */
			spin_lock(&p->files->file_lock);
			fdt = files_fdtable(p->files);
			for (i = 0; i < fdt->max_fds; i++) {
				filp = fcheck_files(p->files, i);
				if (!filp)
					continue;
				if (filp->f_op->read == tty_read &&
				    filp->private_data == tty) {
					printk(KERN_NOTICE "SAK: killed process %d"
					    " (%s): fd#%d opened to the tty\n",
					    task_pid_nr(p), p->comm, i);
					force_sig(SIGKILL, p);
					break;
				}
			}
			spin_unlock(&p->files->file_lock);
		}
		task_unlock(p);
	} while_each_thread(g, p);
	read_unlock(&tasklist_lock);
#endif
}

static void do_SAK_work(struct work_struct *work)
{
	struct tty_struct *tty =
		container_of(work, struct tty_struct, SAK_work);
	__do_SAK(tty);
}

/*
 * The tq handling here is a little racy - tty->SAK_work may already be queued.
 * Fortunately we don't need to worry, because if ->SAK_work is already queued,
 * the values which we write to it will be identical to the values which it
 * already has. --akpm
 */
void do_SAK(struct tty_struct *tty)
{
	if (!tty)
		return;
	schedule_work(&tty->SAK_work);
}

EXPORT_SYMBOL(do_SAK);

/**
 *	flush_to_ldisc
 *	@work: tty structure passed from work queue.
 *
 *	This routine is called out of the software interrupt to flush data
 *	from the buffer chain to the line discipline.
 *
 *	Locking: holds tty->buf.lock to guard buffer list. Drops the lock
 *	while invoking the line discipline receive_buf method. The
 *	receive_buf method is single threaded for each tty instance.
 */

static void flush_to_ldisc(struct work_struct *work)
{
	struct tty_struct *tty =
		container_of(work, struct tty_struct, buf.work.work);
	unsigned long 	flags;
	struct tty_ldisc *disc;
	struct tty_buffer *tbuf, *head;
	char *char_buf;
	unsigned char *flag_buf;

	disc = tty_ldisc_ref(tty);
	if (disc == NULL)	/*  !TTY_LDISC */
		return;

	spin_lock_irqsave(&tty->buf.lock, flags);
	/* So we know a flush is running */
	set_bit(TTY_FLUSHING, &tty->flags);
	head = tty->buf.head;
	if (head != NULL) {
		tty->buf.head = NULL;
		for (;;) {
			int count = head->commit - head->read;
			if (!count) {
				if (head->next == NULL)
					break;
				tbuf = head;
				head = head->next;
				tty_buffer_free(tty, tbuf);
				continue;
			}
			/* Ldisc or user is trying to flush the buffers
			   we are feeding to the ldisc, stop feeding the
			   line discipline as we want to empty the queue */
			if (test_bit(TTY_FLUSHPENDING, &tty->flags))
				break;
			if (!tty->receive_room) {
				schedule_delayed_work(&tty->buf.work, 1);
				break;
			}
			if (count > tty->receive_room)
				count = tty->receive_room;
			char_buf = head->char_buf_ptr + head->read;
			flag_buf = head->flag_buf_ptr + head->read;
			head->read += count;
			spin_unlock_irqrestore(&tty->buf.lock, flags);
			disc->ops->receive_buf(tty, char_buf,
							flag_buf, count);
			spin_lock_irqsave(&tty->buf.lock, flags);
		}
		/* Restore the queue head */
		tty->buf.head = head;
	}
	/* We may have a deferred request to flush the input buffer,
	   if so pull the chain under the lock and empty the queue */
	if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
		__tty_buffer_flush(tty);
		clear_bit(TTY_FLUSHPENDING, &tty->flags);
		wake_up(&tty->read_wait);
	}
	clear_bit(TTY_FLUSHING, &tty->flags);
	spin_unlock_irqrestore(&tty->buf.lock, flags);

	tty_ldisc_deref(disc);
}

/**
 *	tty_flip_buffer_push	-	terminal
 *	@tty: tty to push
 *
 *	Queue a push of the terminal flip buffers to the line discipline. This
 *	function must not be called from IRQ context if tty->low_latency is set.
 *
 *	In the event of the queue being busy for flipping the work will be
 *	held off and retried later.
 *
 *	Locking: tty buffer lock. Driver locks in low latency mode.
 */

void tty_flip_buffer_push(struct tty_struct *tty)
{
	unsigned long flags;
	spin_lock_irqsave(&tty->buf.lock, flags);
	if (tty->buf.tail != NULL)
		tty->buf.tail->commit = tty->buf.tail->used;
	spin_unlock_irqrestore(&tty->buf.lock, flags);

	if (tty->low_latency)
		flush_to_ldisc(&tty->buf.work.work);
	else
		schedule_delayed_work(&tty->buf.work, 1);
}

EXPORT_SYMBOL(tty_flip_buffer_push);


/**
 *	initialize_tty_struct
 *	@tty: tty to initialize
 *
 *	This subroutine initializes a tty structure that has been newly
 *	allocated.
 *
 *	Locking: none - tty in question must not be exposed at this point
 */

static void initialize_tty_struct(struct tty_struct *tty)
{
	struct tty_ldisc ld;
	memset(tty, 0, sizeof(struct tty_struct));
	tty->magic = TTY_MAGIC;
	if (tty_ldisc_get(N_TTY, &ld) < 0)
		panic("n_tty: init_tty");
	tty_ldisc_assign(tty, &ld);
	tty->session = NULL;
	tty->pgrp = NULL;
	tty->overrun_time = jiffies;
	tty->buf.head = tty->buf.tail = NULL;
	tty_buffer_init(tty);
	INIT_DELAYED_WORK(&tty->buf.work, flush_to_ldisc);
	mutex_init(&tty->termios_mutex);
	init_waitqueue_head(&tty->write_wait);
	init_waitqueue_head(&tty->read_wait);
	INIT_WORK(&tty->hangup_work, do_tty_hangup);
	mutex_init(&tty->atomic_read_lock);
	mutex_init(&tty->atomic_write_lock);
	spin_lock_init(&tty->read_lock);
	spin_lock_init(&tty->ctrl_lock);
	INIT_LIST_HEAD(&tty->tty_files);
	INIT_WORK(&tty->SAK_work, do_SAK_work);
}

/**
 *	tty_put_char	-	write one character to a tty
 *	@tty: tty
 *	@ch: character
 *
 *	Write one byte to the tty using the provided put_char method
 *	if present. Returns the number of characters successfully output.
 *
 *	Note: the specific put_char operation in the driver layer may go
 *	away soon. Don't call it directly, use this method
 */

int tty_put_char(struct tty_struct *tty, unsigned char ch)
{
	if (tty->ops->put_char)
		return tty->ops->put_char(tty, ch);
	return tty->ops->write(tty, &ch, 1);
}

EXPORT_SYMBOL_GPL(tty_put_char);

static struct class *tty_class;

/**
 *	tty_register_device - register a tty device
 *	@driver: the tty driver that describes the tty device
 *	@index: the index in the tty driver for this tty device
 *	@device: a struct device that is associated with this tty device.
 *		This field is optional, if there is no known struct device
 *		for this tty device it can be set to NULL safely.
 *
 *	Returns a pointer to the struct device for this tty device
 *	(or ERR_PTR(-EFOO) on error).
 *
 *	This call is required to be made to register an individual tty device
 *	if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set.  If
 *	that bit is not set, this function should not be called by a tty
 *	driver.
 *
 *	Locking: ??
 */

struct device *tty_register_device(struct tty_driver *driver, unsigned index,
				   struct device *device)
{
	char name[64];
	dev_t dev = MKDEV(driver->major, driver->minor_start) + index;

	if (index >= driver->num) {
		printk(KERN_ERR "Attempt to register invalid tty line number "
		       " (%d).\n", index);
		return ERR_PTR(-EINVAL);
	}

	if (driver->type == TTY_DRIVER_TYPE_PTY)
		pty_line_name(driver, index, name);
	else
		tty_line_name(driver, index, name);

	return device_create_drvdata(tty_class, device, dev, NULL, name);
}

/**
 * 	tty_unregister_device - unregister a tty device
 * 	@driver: the tty driver that describes the tty device
 * 	@index: the index in the tty driver for this tty device
 *
 * 	If a tty device is registered with a call to tty_register_device() then
 *	this function must be called when the tty device is gone.
 *
 *	Locking: ??
 */

void tty_unregister_device(struct tty_driver *driver, unsigned index)
{
	device_destroy(tty_class,
		MKDEV(driver->major, driver->minor_start) + index);
}

EXPORT_SYMBOL(tty_register_device);
EXPORT_SYMBOL(tty_unregister_device);

struct tty_driver *alloc_tty_driver(int lines)
{
	struct tty_driver *driver;

	driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL);
	if (driver) {
		driver->magic = TTY_DRIVER_MAGIC;
		driver->num = lines;
		/* later we'll move allocation of tables here */
	}
	return driver;
}

void put_tty_driver(struct tty_driver *driver)
{
	kfree(driver);
}

void tty_set_operations(struct tty_driver *driver,
			const struct tty_operations *op)
{
	driver->ops = op;
};

EXPORT_SYMBOL(alloc_tty_driver);
EXPORT_SYMBOL(put_tty_driver);
EXPORT_SYMBOL(tty_set_operations);

/*
 * Called by a tty driver to register itself.
 */
int tty_register_driver(struct tty_driver *driver)
{
	int error;
	int i;
	dev_t dev;
	void **p = NULL;

	if (driver->flags & TTY_DRIVER_INSTALLED)
		return 0;

	if (!(driver->flags & TTY_DRIVER_DEVPTS_MEM) && driver->num) {
		p = kzalloc(driver->num * 3 * sizeof(void *), GFP_KERNEL);
		if (!p)
			return -ENOMEM;
	}

	if (!driver->major) {
		error = alloc_chrdev_region(&dev, driver->minor_start,
						driver->num, driver->name);
		if (!error) {
			driver->major = MAJOR(dev);
			driver->minor_start = MINOR(dev);
		}
	} else {
		dev = MKDEV(driver->major, driver->minor_start);
		error = register_chrdev_region(dev, driver->num, driver->name);
	}
	if (error < 0) {
		kfree(p);
		return error;
	}

	if (p) {
		driver->ttys = (struct tty_struct **)p;
		driver->termios = (struct ktermios **)(p + driver->num);
		driver->termios_locked = (struct ktermios **)
							(p + driver->num * 2);
	} else {
		driver->ttys = NULL;
		driver->termios = NULL;
		driver->termios_locked = NULL;
	}

	cdev_init(&driver->cdev, &tty_fops);
	driver->cdev.owner = driver->owner;
	error = cdev_add(&driver->cdev, dev, driver->num);
	if (error) {
		unregister_chrdev_region(dev, driver->num);
		driver->ttys = NULL;
		driver->termios = driver->termios_locked = NULL;
		kfree(p);
		return error;
	}

	mutex_lock(&tty_mutex);
	list_add(&driver->tty_drivers, &tty_drivers);
	mutex_unlock(&tty_mutex);

	if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {
		for (i = 0; i < driver->num; i++)
		    tty_register_device(driver, i, NULL);
	}
	proc_tty_register_driver(driver);
	return 0;
}

EXPORT_SYMBOL(tty_register_driver);

/*
 * Called by a tty driver to unregister itself.
 */
int tty_unregister_driver(struct tty_driver *driver)
{
	int i;
	struct ktermios *tp;
	void *p;

	if (driver->refcount)
		return -EBUSY;

	unregister_chrdev_region(MKDEV(driver->major, driver->minor_start),
				driver->num);
	mutex_lock(&tty_mutex);
	list_del(&driver->tty_drivers);
	mutex_unlock(&tty_mutex);

	/*
	 * Free the termios and termios_locked structures because
	 * we don't want to get memory leaks when modular tty
	 * drivers are removed from the kernel.
	 */
	for (i = 0; i < driver->num; i++) {
		tp = driver->termios[i];
		if (tp) {
			driver->termios[i] = NULL;
			kfree(tp);
		}
		tp = driver->termios_locked[i];
		if (tp) {
			driver->termios_locked[i] = NULL;
			kfree(tp);
		}
		if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
			tty_unregister_device(driver, i);
	}
	p = driver->ttys;
	proc_tty_unregister_driver(driver);
	driver->ttys = NULL;
	driver->termios = driver->termios_locked = NULL;
	kfree(p);
	cdev_del(&driver->cdev);
	return 0;
}
EXPORT_SYMBOL(tty_unregister_driver);

dev_t tty_devnum(struct tty_struct *tty)
{
	return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
}
EXPORT_SYMBOL(tty_devnum);

void proc_clear_tty(struct task_struct *p)
{
	spin_lock_irq(&p->sighand->siglock);
	p->signal->tty = NULL;
	spin_unlock_irq(&p->sighand->siglock);
}
EXPORT_SYMBOL(proc_clear_tty);

/* Called under the sighand lock */

static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
{
	if (tty) {
		unsigned long flags;
		/* We should not have a session or pgrp to put here but.... */
		spin_lock_irqsave(&tty->ctrl_lock, flags);
		put_pid(tty->session);
		put_pid(tty->pgrp);
		tty->pgrp = get_pid(task_pgrp(tsk));
		spin_unlock_irqrestore(&tty->ctrl_lock, flags);
		tty->session = get_pid(task_session(tsk));
	}
	put_pid(tsk->signal->tty_old_pgrp);
	tsk->signal->tty = tty;
	tsk->signal->tty_old_pgrp = NULL;
}

static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
{
	spin_lock_irq(&tsk->sighand->siglock);
	__proc_set_tty(tsk, tty);
	spin_unlock_irq(&tsk->sighand->siglock);
}

struct tty_struct *get_current_tty(void)
{
	struct tty_struct *tty;
	WARN_ON_ONCE(!mutex_is_locked(&tty_mutex));
	tty = current->signal->tty;
	/*
	 * session->tty can be changed/cleared from under us, make sure we
	 * issue the load. The obtained pointer, when not NULL, is valid as
	 * long as we hold tty_mutex.
	 */
	barrier();
	return tty;
}
EXPORT_SYMBOL_GPL(get_current_tty);

/*
 * Initialize the console device. This is called *early*, so
 * we can't necessarily depend on lots of kernel help here.
 * Just do some early initializations, and do the complex setup
 * later.
 */
void __init console_init(void)
{
	initcall_t *call;

	/* Setup the default TTY line discipline. */
	(void) tty_register_ldisc(N_TTY, &tty_ldisc_N_TTY);

	/*
	 * set up the console device so that later boot sequences can
	 * inform about problems etc..
	 */
	call = __con_initcall_start;
	while (call < __con_initcall_end) {
		(*call)();
		call++;
	}
}

static int __init tty_class_init(void)
{
	tty_class = class_create(THIS_MODULE, "tty");
	if (IS_ERR(tty_class))
		return PTR_ERR(tty_class);
	return 0;
}

postcore_initcall(tty_class_init);

/* 3/2004 jmc: why do these devices exist? */

static struct cdev tty_cdev, console_cdev;
#ifdef CONFIG_UNIX98_PTYS
static struct cdev ptmx_cdev;
#endif
#ifdef CONFIG_VT
static struct cdev vc0_cdev;
#endif

/*
 * Ok, now we can initialize the rest of the tty devices and can count
 * on memory allocations, interrupts etc..
 */
static int __init tty_init(void)
{
	cdev_init(&tty_cdev, &tty_fops);
	if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
		panic("Couldn't register /dev/tty driver\n");
	device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL,
			      "tty");

	cdev_init(&console_cdev, &console_fops);
	if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
		panic("Couldn't register /dev/console driver\n");
	device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
			      "console");

#ifdef CONFIG_UNIX98_PTYS
	cdev_init(&ptmx_cdev, &ptmx_fops);
	if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) ||
	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
		panic("Couldn't register /dev/ptmx driver\n");
	device_create_drvdata(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
#endif

#ifdef CONFIG_VT
	cdev_init(&vc0_cdev, &console_fops);
	if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
	    register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
		panic("Couldn't register /dev/tty0 driver\n");
	device_create_drvdata(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");

	vty_init();
#endif
	return 0;
}
module_init(tty_init);