iwlagn: all function iwl-io.c receive iwl_bus
Which means that iwl-io.c doesn't need to include iwl-dev.h any more.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
index 033f595..02b00d1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
@@ -85,29 +85,29 @@
priv->ucode_write_complete = 0;
- iwl_write_direct32(priv,
+ iwl_write_direct32(bus(priv),
FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE);
- iwl_write_direct32(priv,
+ iwl_write_direct32(bus(priv),
FH_SRVC_CHNL_SRAM_ADDR_REG(FH_SRVC_CHNL), dst_addr);
- iwl_write_direct32(priv,
+ iwl_write_direct32(bus(priv),
FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL),
phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK);
- iwl_write_direct32(priv,
+ iwl_write_direct32(bus(priv),
FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL),
(iwl_get_dma_hi_addr(phy_addr)
<< FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt);
- iwl_write_direct32(priv,
+ iwl_write_direct32(bus(priv),
FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL),
1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM |
1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX |
FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID);
- iwl_write_direct32(priv,
+ iwl_write_direct32(bus(priv),
FH_TCSR_CHNL_TX_CONFIG_REG(FH_SRVC_CHNL),
FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE |
@@ -384,9 +384,9 @@
/* read data comes through single port, auto-incr addr */
/* NOTE: Use the debugless read so we don't flood kernel log
* if IWL_DL_IO is set */
- iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
+ iwl_write_direct32(bus(priv), HBUS_TARG_MEM_RADDR,
i + IWLAGN_RTC_INST_LOWER_BOUND);
- val = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
+ val = iwl_read32(bus(priv), HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image))
return -EIO;
}
@@ -405,14 +405,14 @@
IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len);
- iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
+ iwl_write_direct32(bus(priv), HBUS_TARG_MEM_RADDR,
IWLAGN_RTC_INST_LOWER_BOUND);
for (offs = 0;
offs < len && errors < 20;
offs += sizeof(u32), image++) {
/* read data comes through single port, auto-incr addr */
- val = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
+ val = iwl_read32(bus(priv), HBUS_TARG_MEM_RDAT);
if (val != le32_to_cpu(*image)) {
IWL_ERR(priv, "uCode INST section at "
"offset 0x%x, is 0x%x, s/b 0x%x\n",