libata: Remove SCSI_ prefix from Kconfig symbols
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 95d6b41..03d9689 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -9,7 +9,7 @@
that "speaks" the ATA protocol, also called ATA controller),
because you will be asked for it.
-config SCSI_SATA_AHCI
+config SATA_AHCI
tristate "AHCI SATA support"
depends on ATA && PCI
help
@@ -17,7 +17,7 @@
If unsure, say N.
-config SCSI_SATA_SVW
+config SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
depends on ATA && PCI
help
@@ -26,7 +26,7 @@
If unsure, say N.
-config SCSI_ATA_PIIX
+config ATA_PIIX
tristate "Intel PIIX/ICH SATA support"
depends on ATA && PCI
help
@@ -36,7 +36,7 @@
If unsure, say N.
-config SCSI_SATA_MV
+config SATA_MV
tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
depends on ATA && PCI && EXPERIMENTAL
help
@@ -45,7 +45,7 @@
If unsure, say N.
-config SCSI_SATA_NV
+config SATA_NV
tristate "NVIDIA SATA support"
depends on ATA && PCI
help
@@ -53,7 +53,7 @@
If unsure, say N.
-config SCSI_PDC_ADMA
+config PDC_ADMA
tristate "Pacific Digital ADMA support"
depends on ATA && PCI
help
@@ -61,7 +61,7 @@
If unsure, say N.
-config SCSI_SATA_QSTOR
+config SATA_QSTOR
tristate "Pacific Digital SATA QStor support"
depends on ATA && PCI
help
@@ -69,7 +69,7 @@
If unsure, say N.
-config SCSI_SATA_PROMISE
+config SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
depends on ATA && PCI
help
@@ -77,7 +77,7 @@
If unsure, say N.
-config SCSI_SATA_SX4
+config SATA_SX4
tristate "Promise SATA SX4 support"
depends on ATA && PCI && EXPERIMENTAL
help
@@ -85,7 +85,7 @@
If unsure, say N.
-config SCSI_SATA_SIL
+config SATA_SIL
tristate "Silicon Image SATA support"
depends on ATA && PCI
help
@@ -93,7 +93,7 @@
If unsure, say N.
-config SCSI_SATA_SIL24
+config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on ATA && PCI
help
@@ -101,7 +101,7 @@
If unsure, say N.
-config SCSI_SATA_SIS
+config SATA_SIS
tristate "SiS 964/180 SATA support"
depends on ATA && PCI
help
@@ -109,7 +109,7 @@
If unsure, say N.
-config SCSI_SATA_ULI
+config SATA_ULI
tristate "ULi Electronics SATA support"
depends on ATA && PCI
help
@@ -117,7 +117,7 @@
If unsure, say N.
-config SCSI_SATA_VIA
+config SATA_VIA
tristate "VIA SATA support"
depends on ATA && PCI
help
@@ -125,7 +125,7 @@
If unsure, say N.
-config SCSI_SATA_VITESSE
+config SATA_VITESSE
tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
depends on ATA && PCI
help
@@ -133,8 +133,8 @@
If unsure, say N.
-config SCSI_SATA_INTEL_COMBINED
+config SATA_INTEL_COMBINED
bool
- depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX)
+ depends on IDE=y && !BLK_DEV_IDE_SATA && (SATA_AHCI || ATA_PIIX)
default y
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 60bdb7b..b19a773 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,19 +1,19 @@
-obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o
-obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o
-obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
-obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
-obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
-obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
-obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o
-obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
-obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
-obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o
-obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o
-obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
-obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
-obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o
-obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o
+obj-$(CONFIG_SATA_AHCI) += libata.o ahci.o
+obj-$(CONFIG_SATA_SVW) += libata.o sata_svw.o
+obj-$(CONFIG_ATA_PIIX) += libata.o ata_piix.o
+obj-$(CONFIG_SATA_PROMISE) += libata.o sata_promise.o
+obj-$(CONFIG_SATA_QSTOR) += libata.o sata_qstor.o
+obj-$(CONFIG_SATA_SIL) += libata.o sata_sil.o
+obj-$(CONFIG_SATA_SIL24) += libata.o sata_sil24.o
+obj-$(CONFIG_SATA_VIA) += libata.o sata_via.o
+obj-$(CONFIG_SATA_VITESSE) += libata.o sata_vsc.o
+obj-$(CONFIG_SATA_SIS) += libata.o sata_sis.o
+obj-$(CONFIG_SATA_SX4) += libata.o sata_sx4.o
+obj-$(CONFIG_SATA_NV) += libata.o sata_nv.o
+obj-$(CONFIG_SATA_ULI) += libata.o sata_uli.o
+obj-$(CONFIG_SATA_MV) += libata.o sata_mv.o
+obj-$(CONFIG_PDC_ADMA) += libata.o pdc_adma.o
libata-objs := libata-core.o libata-scsi.o libata-bmdma.o libata-eh.o