| /* |
| * originally based on the dummy device. |
| * |
| * Copyright 1999, Thomas Davis, tadavis@lbl.gov. |
| * Licensed under the GPL. Based on dummy.c, and eql.c devices. |
| * |
| * bonding.c: an Ethernet Bonding driver |
| * |
| * This is useful to talk to a Cisco EtherChannel compatible equipment: |
| * Cisco 5500 |
| * Sun Trunking (Solaris) |
| * Alteon AceDirector Trunks |
| * Linux Bonding |
| * and probably many L2 switches ... |
| * |
| * How it works: |
| * ifconfig bond0 ipaddress netmask up |
| * will setup a network device, with an ip address. No mac address |
| * will be assigned at this time. The hw mac address will come from |
| * the first slave bonded to the channel. All slaves will then use |
| * this hw mac address. |
| * |
| * ifconfig bond0 down |
| * will release all slaves, marking them as down. |
| * |
| * ifenslave bond0 eth0 |
| * will attach eth0 to bond0 as a slave. eth0 hw mac address will either |
| * a: be used as initial mac address |
| * b: if a hw mac address already is there, eth0's hw mac address |
| * will then be set from bond0. |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/fcntl.h> |
| #include <linux/interrupt.h> |
| #include <linux/ptrace.h> |
| #include <linux/ioport.h> |
| #include <linux/in.h> |
| #include <net/ip.h> |
| #include <linux/ip.h> |
| #include <linux/tcp.h> |
| #include <linux/udp.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/timer.h> |
| #include <linux/socket.h> |
| #include <linux/ctype.h> |
| #include <linux/inet.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| #include <asm/system.h> |
| #include <asm/dma.h> |
| #include <linux/uaccess.h> |
| #include <linux/errno.h> |
| #include <linux/netdevice.h> |
| #include <linux/inetdevice.h> |
| #include <linux/igmp.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <net/sock.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/smp.h> |
| #include <linux/if_ether.h> |
| #include <net/arp.h> |
| #include <linux/mii.h> |
| #include <linux/ethtool.h> |
| #include <linux/if_vlan.h> |
| #include <linux/if_bonding.h> |
| #include <linux/jiffies.h> |
| #include <linux/preempt.h> |
| #include <net/route.h> |
| #include <net/net_namespace.h> |
| #include <net/netns/generic.h> |
| #include "bonding.h" |
| #include "bond_3ad.h" |
| #include "bond_alb.h" |
| |
| /*---------------------------- Module parameters ----------------------------*/ |
| |
| /* monitor all links that often (in milliseconds). <=0 disables monitoring */ |
| #define BOND_LINK_MON_INTERV 0 |
| #define BOND_LINK_ARP_INTERV 0 |
| |
| static int max_bonds = BOND_DEFAULT_MAX_BONDS; |
| static int tx_queues = BOND_DEFAULT_TX_QUEUES; |
| static int num_peer_notif = 1; |
| static int miimon = BOND_LINK_MON_INTERV; |
| static int updelay; |
| static int downdelay; |
| static int use_carrier = 1; |
| static char *mode; |
| static char *primary; |
| static char *primary_reselect; |
| static char *lacp_rate; |
| static char *ad_select; |
| static char *xmit_hash_policy; |
| static int arp_interval = BOND_LINK_ARP_INTERV; |
| static char *arp_ip_target[BOND_MAX_ARP_TARGETS]; |
| static char *arp_validate; |
| static char *fail_over_mac; |
| static int all_slaves_active = 0; |
| static struct bond_params bonding_defaults; |
| static int resend_igmp = BOND_DEFAULT_RESEND_IGMP; |
| |
| module_param(max_bonds, int, 0); |
| MODULE_PARM_DESC(max_bonds, "Max number of bonded devices"); |
| module_param(tx_queues, int, 0); |
| MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)"); |
| module_param_named(num_grat_arp, num_peer_notif, int, 0644); |
| MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on failover event (alias of num_unsol_na)"); |
| module_param_named(num_unsol_na, num_peer_notif, int, 0644); |
| MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on failover event (alias of num_grat_arp)"); |
| module_param(miimon, int, 0); |
| MODULE_PARM_DESC(miimon, "Link check interval in milliseconds"); |
| module_param(updelay, int, 0); |
| MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds"); |
| module_param(downdelay, int, 0); |
| MODULE_PARM_DESC(downdelay, "Delay before considering link down, " |
| "in milliseconds"); |
| module_param(use_carrier, int, 0); |
| MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; " |
| "0 for off, 1 for on (default)"); |
| module_param(mode, charp, 0); |
| MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, " |
| "1 for active-backup, 2 for balance-xor, " |
| "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, " |
| "6 for balance-alb"); |
| module_param(primary, charp, 0); |
| MODULE_PARM_DESC(primary, "Primary network device to use"); |
| module_param(primary_reselect, charp, 0); |
| MODULE_PARM_DESC(primary_reselect, "Reselect primary slave " |
| "once it comes up; " |
| "0 for always (default), " |
| "1 for only if speed of primary is " |
| "better, " |
| "2 for only on active slave " |
| "failure"); |
| module_param(lacp_rate, charp, 0); |
| MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner " |
| "(slow/fast)"); |
| module_param(ad_select, charp, 0); |
| MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2)"); |
| module_param(xmit_hash_policy, charp, 0); |
| MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)" |
| ", 1 for layer 3+4"); |
| module_param(arp_interval, int, 0); |
| MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds"); |
| module_param_array(arp_ip_target, charp, NULL, 0); |
| MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form"); |
| module_param(arp_validate, charp, 0); |
| MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes: none (default), active, backup or all"); |
| module_param(fail_over_mac, charp, 0); |
| MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to the same MAC. none (default), active or follow"); |
| module_param(all_slaves_active, int, 0); |
| MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface" |
| "by setting active flag for all slaves. " |
| "0 for never (default), 1 for always."); |
| module_param(resend_igmp, int, 0); |
| MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on link failure"); |
| |
| /*----------------------------- Global variables ----------------------------*/ |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| atomic_t netpoll_block_tx = ATOMIC_INIT(0); |
| #endif |
| |
| int bond_net_id __read_mostly; |
| |
| static __be32 arp_target[BOND_MAX_ARP_TARGETS]; |
| static int arp_ip_count; |
| static int bond_mode = BOND_MODE_ROUNDROBIN; |
| static int xmit_hashtype = BOND_XMIT_POLICY_LAYER2; |
| static int lacp_fast; |
| |
| const struct bond_parm_tbl bond_lacp_tbl[] = { |
| { "slow", AD_LACP_SLOW}, |
| { "fast", AD_LACP_FAST}, |
| { NULL, -1}, |
| }; |
| |
| const struct bond_parm_tbl bond_mode_tbl[] = { |
| { "balance-rr", BOND_MODE_ROUNDROBIN}, |
| { "active-backup", BOND_MODE_ACTIVEBACKUP}, |
| { "balance-xor", BOND_MODE_XOR}, |
| { "broadcast", BOND_MODE_BROADCAST}, |
| { "802.3ad", BOND_MODE_8023AD}, |
| { "balance-tlb", BOND_MODE_TLB}, |
| { "balance-alb", BOND_MODE_ALB}, |
| { NULL, -1}, |
| }; |
| |
| const struct bond_parm_tbl xmit_hashtype_tbl[] = { |
| { "layer2", BOND_XMIT_POLICY_LAYER2}, |
| { "layer3+4", BOND_XMIT_POLICY_LAYER34}, |
| { "layer2+3", BOND_XMIT_POLICY_LAYER23}, |
| { NULL, -1}, |
| }; |
| |
| const struct bond_parm_tbl arp_validate_tbl[] = { |
| { "none", BOND_ARP_VALIDATE_NONE}, |
| { "active", BOND_ARP_VALIDATE_ACTIVE}, |
| { "backup", BOND_ARP_VALIDATE_BACKUP}, |
| { "all", BOND_ARP_VALIDATE_ALL}, |
| { NULL, -1}, |
| }; |
| |
| const struct bond_parm_tbl fail_over_mac_tbl[] = { |
| { "none", BOND_FOM_NONE}, |
| { "active", BOND_FOM_ACTIVE}, |
| { "follow", BOND_FOM_FOLLOW}, |
| { NULL, -1}, |
| }; |
| |
| const struct bond_parm_tbl pri_reselect_tbl[] = { |
| { "always", BOND_PRI_RESELECT_ALWAYS}, |
| { "better", BOND_PRI_RESELECT_BETTER}, |
| { "failure", BOND_PRI_RESELECT_FAILURE}, |
| { NULL, -1}, |
| }; |
| |
| struct bond_parm_tbl ad_select_tbl[] = { |
| { "stable", BOND_AD_STABLE}, |
| { "bandwidth", BOND_AD_BANDWIDTH}, |
| { "count", BOND_AD_COUNT}, |
| { NULL, -1}, |
| }; |
| |
| /*-------------------------- Forward declarations ---------------------------*/ |
| |
| static int bond_init(struct net_device *bond_dev); |
| static void bond_uninit(struct net_device *bond_dev); |
| |
| /*---------------------------- General routines -----------------------------*/ |
| |
| const char *bond_mode_name(int mode) |
| { |
| static const char *names[] = { |
| [BOND_MODE_ROUNDROBIN] = "load balancing (round-robin)", |
| [BOND_MODE_ACTIVEBACKUP] = "fault-tolerance (active-backup)", |
| [BOND_MODE_XOR] = "load balancing (xor)", |
| [BOND_MODE_BROADCAST] = "fault-tolerance (broadcast)", |
| [BOND_MODE_8023AD] = "IEEE 802.3ad Dynamic link aggregation", |
| [BOND_MODE_TLB] = "transmit load balancing", |
| [BOND_MODE_ALB] = "adaptive load balancing", |
| }; |
| |
| if (mode < 0 || mode > BOND_MODE_ALB) |
| return "unknown"; |
| |
| return names[mode]; |
| } |
| |
| /*---------------------------------- VLAN -----------------------------------*/ |
| |
| /** |
| * bond_add_vlan - add a new vlan id on bond |
| * @bond: bond that got the notification |
| * @vlan_id: the vlan id to add |
| * |
| * Returns -ENOMEM if allocation failed. |
| */ |
| static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id) |
| { |
| struct vlan_entry *vlan; |
| |
| pr_debug("bond: %s, vlan id %d\n", |
| (bond ? bond->dev->name : "None"), vlan_id); |
| |
| vlan = kzalloc(sizeof(struct vlan_entry), GFP_KERNEL); |
| if (!vlan) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(&vlan->vlan_list); |
| vlan->vlan_id = vlan_id; |
| |
| write_lock_bh(&bond->lock); |
| |
| list_add_tail(&vlan->vlan_list, &bond->vlan_list); |
| |
| write_unlock_bh(&bond->lock); |
| |
| pr_debug("added VLAN ID %d on bond %s\n", vlan_id, bond->dev->name); |
| |
| return 0; |
| } |
| |
| /** |
| * bond_del_vlan - delete a vlan id from bond |
| * @bond: bond that got the notification |
| * @vlan_id: the vlan id to delete |
| * |
| * returns -ENODEV if @vlan_id was not found in @bond. |
| */ |
| static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id) |
| { |
| struct vlan_entry *vlan; |
| int res = -ENODEV; |
| |
| pr_debug("bond: %s, vlan id %d\n", bond->dev->name, vlan_id); |
| |
| block_netpoll_tx(); |
| write_lock_bh(&bond->lock); |
| |
| list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { |
| if (vlan->vlan_id == vlan_id) { |
| list_del(&vlan->vlan_list); |
| |
| if (bond_is_lb(bond)) |
| bond_alb_clear_vlan(bond, vlan_id); |
| |
| pr_debug("removed VLAN ID %d from bond %s\n", |
| vlan_id, bond->dev->name); |
| |
| kfree(vlan); |
| |
| if (list_empty(&bond->vlan_list) && |
| (bond->slave_cnt == 0)) { |
| /* Last VLAN removed and no slaves, so |
| * restore block on adding VLANs. This will |
| * be removed once new slaves that are not |
| * VLAN challenged will be added. |
| */ |
| bond->dev->features |= NETIF_F_VLAN_CHALLENGED; |
| } |
| |
| res = 0; |
| goto out; |
| } |
| } |
| |
| pr_debug("couldn't find VLAN ID %d in bond %s\n", |
| vlan_id, bond->dev->name); |
| |
| out: |
| write_unlock_bh(&bond->lock); |
| unblock_netpoll_tx(); |
| return res; |
| } |
| |
| /** |
| * bond_next_vlan - safely skip to the next item in the vlans list. |
| * @bond: the bond we're working on |
| * @curr: item we're advancing from |
| * |
| * Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL, |
| * or @curr->next otherwise (even if it is @curr itself again). |
| * |
| * Caller must hold bond->lock |
| */ |
| struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr) |
| { |
| struct vlan_entry *next, *last; |
| |
| if (list_empty(&bond->vlan_list)) |
| return NULL; |
| |
| if (!curr) { |
| next = list_entry(bond->vlan_list.next, |
| struct vlan_entry, vlan_list); |
| } else { |
| last = list_entry(bond->vlan_list.prev, |
| struct vlan_entry, vlan_list); |
| if (last == curr) { |
| next = list_entry(bond->vlan_list.next, |
| struct vlan_entry, vlan_list); |
| } else { |
| next = list_entry(curr->vlan_list.next, |
| struct vlan_entry, vlan_list); |
| } |
| } |
| |
| return next; |
| } |
| |
| /** |
| * bond_dev_queue_xmit - Prepare skb for xmit. |
| * |
| * @bond: bond device that got this skb for tx. |
| * @skb: hw accel VLAN tagged skb to transmit |
| * @slave_dev: slave that is supposed to xmit this skbuff |
| */ |
| int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, |
| struct net_device *slave_dev) |
| { |
| skb->dev = slave_dev; |
| skb->priority = 1; |
| if (unlikely(netpoll_tx_running(slave_dev))) |
| bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb); |
| else |
| dev_queue_xmit(skb); |
| |
| return 0; |
| } |
| |
| /* |
| * In the following 3 functions, bond_vlan_rx_register(), bond_vlan_rx_add_vid |
| * and bond_vlan_rx_kill_vid, We don't protect the slave list iteration with a |
| * lock because: |
| * a. This operation is performed in IOCTL context, |
| * b. The operation is protected by the RTNL semaphore in the 8021q code, |
| * c. Holding a lock with BH disabled while directly calling a base driver |
| * entry point is generally a BAD idea. |
| * |
| * The design of synchronization/protection for this operation in the 8021q |
| * module is good for one or more VLAN devices over a single physical device |
| * and cannot be extended for a teaming solution like bonding, so there is a |
| * potential race condition here where a net device from the vlan group might |
| * be referenced (either by a base driver or the 8021q code) while it is being |
| * removed from the system. However, it turns out we're not making matters |
| * worse, and if it works for regular VLAN usage it will work here too. |
| */ |
| |
| /** |
| * bond_vlan_rx_register - Propagates registration to slaves |
| * @bond_dev: bonding net device that got called |
| * @grp: vlan group being registered |
| */ |
| static void bond_vlan_rx_register(struct net_device *bond_dev, |
| struct vlan_group *grp) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *slave; |
| int i; |
| |
| write_lock_bh(&bond->lock); |
| bond->vlgrp = grp; |
| write_unlock_bh(&bond->lock); |
| |
| bond_for_each_slave(bond, slave, i) { |
| struct net_device *slave_dev = slave->dev; |
| const struct net_device_ops *slave_ops = slave_dev->netdev_ops; |
| |
| if ((slave_dev->features & NETIF_F_HW_VLAN_RX) && |
| slave_ops->ndo_vlan_rx_register) { |
| slave_ops->ndo_vlan_rx_register(slave_dev, grp); |
| } |
| } |
| } |
| |
| /** |
| * bond_vlan_rx_add_vid - Propagates adding an id to slaves |
| * @bond_dev: bonding net device that got called |
| * @vid: vlan id being added |
| */ |
| static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *slave; |
| int i, res; |
| |
| bond_for_each_slave(bond, slave, i) { |
| struct net_device *slave_dev = slave->dev; |
| const struct net_device_ops *slave_ops = slave_dev->netdev_ops; |
| |
| if ((slave_dev->features & NETIF_F_HW_VLAN_FILTER) && |
| slave_ops->ndo_vlan_rx_add_vid) { |
| slave_ops->ndo_vlan_rx_add_vid(slave_dev, vid); |
| } |
| } |
| |
| res = bond_add_vlan(bond, vid); |
| if (res) { |
| pr_err("%s: Error: Failed to add vlan id %d\n", |
| bond_dev->name, vid); |
| } |
| } |
| |
| /** |
| * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves |
| * @bond_dev: bonding net device that got called |
| * @vid: vlan id being removed |
| */ |
| static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *slave; |
| struct net_device *vlan_dev; |
| int i, res; |
| |
| bond_for_each_slave(bond, slave, i) { |
| struct net_device *slave_dev = slave->dev; |
| const struct net_device_ops *slave_ops = slave_dev->netdev_ops; |
| |
| if ((slave_dev->features & NETIF_F_HW_VLAN_FILTER) && |
| slave_ops->ndo_vlan_rx_kill_vid) { |
| /* Save and then restore vlan_dev in the grp array, |
| * since the slave's driver might clear it. |
| */ |
| vlan_dev = vlan_group_get_device(bond->vlgrp, vid); |
| slave_ops->ndo_vlan_rx_kill_vid(slave_dev, vid); |
| vlan_group_set_device(bond->vlgrp, vid, vlan_dev); |
| } |
| } |
| |
| res = bond_del_vlan(bond, vid); |
| if (res) { |
| pr_err("%s: Error: Failed to remove vlan id %d\n", |
| bond_dev->name, vid); |
| } |
| } |
| |
| static void bond_add_vlans_on_slave(struct bonding *bond, struct net_device *slave_dev) |
| { |
| struct vlan_entry *vlan; |
| const struct net_device_ops *slave_ops = slave_dev->netdev_ops; |
| |
| if (!bond->vlgrp) |
| return; |
| |
| if ((slave_dev->features & NETIF_F_HW_VLAN_RX) && |
| slave_ops->ndo_vlan_rx_register) |
| slave_ops->ndo_vlan_rx_register(slave_dev, bond->vlgrp); |
| |
| if (!(slave_dev->features & NETIF_F_HW_VLAN_FILTER) || |
| !(slave_ops->ndo_vlan_rx_add_vid)) |
| return; |
| |
| list_for_each_entry(vlan, &bond->vlan_list, vlan_list) |
| slave_ops->ndo_vlan_rx_add_vid(slave_dev, vlan->vlan_id); |
| } |
| |
| static void bond_del_vlans_from_slave(struct bonding *bond, |
| struct net_device *slave_dev) |
| { |
| const struct net_device_ops *slave_ops = slave_dev->netdev_ops; |
| struct vlan_entry *vlan; |
| struct net_device *vlan_dev; |
| |
| if (!bond->vlgrp) |
| return; |
| |
| if (!(slave_dev->features & NETIF_F_HW_VLAN_FILTER) || |
| !(slave_ops->ndo_vlan_rx_kill_vid)) |
| goto unreg; |
| |
| list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { |
| if (!vlan->vlan_id) |
| continue; |
| /* Save and then restore vlan_dev in the grp array, |
| * since the slave's driver might clear it. |
| */ |
| vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id); |
| slave_ops->ndo_vlan_rx_kill_vid(slave_dev, vlan->vlan_id); |
| vlan_group_set_device(bond->vlgrp, vlan->vlan_id, vlan_dev); |
| } |
| |
| unreg: |
| if ((slave_dev->features & NETIF_F_HW_VLAN_RX) && |
| slave_ops->ndo_vlan_rx_register) |
| slave_ops->ndo_vlan_rx_register(slave_dev, NULL); |
| } |
| |
| /*------------------------------- Link status -------------------------------*/ |
| |
| /* |
| * Set the carrier state for the master according to the state of its |
| * slaves. If any slaves are up, the master is up. In 802.3ad mode, |
| * do special 802.3ad magic. |
| * |
| * Returns zero if carrier state does not change, nonzero if it does. |
| */ |
| static int bond_set_carrier(struct bonding *bond) |
| { |
| struct slave *slave; |
| int i; |
| |
| if (bond->slave_cnt == 0) |
| goto down; |
| |
| if (bond->params.mode == BOND_MODE_8023AD) |
| return bond_3ad_set_carrier(bond); |
| |
| bond_for_each_slave(bond, slave, i) { |
| if (slave->link == BOND_LINK_UP) { |
| if (!netif_carrier_ok(bond->dev)) { |
| netif_carrier_on(bond->dev); |
| return 1; |
| } |
| return 0; |
| } |
| } |
| |
| down: |
| if (netif_carrier_ok(bond->dev)) { |
| netif_carrier_off(bond->dev); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * Get link speed and duplex from the slave's base driver |
| * using ethtool. If for some reason the call fails or the |
| * values are invalid, fake speed and duplex to 100/Full |
| * and return error. |
| */ |
| static int bond_update_speed_duplex(struct slave *slave) |
| { |
| struct net_device *slave_dev = slave->dev; |
| struct ethtool_cmd etool = { .cmd = ETHTOOL_GSET }; |
| u32 slave_speed; |
| int res; |
| |
| /* Fake speed and duplex */ |
| slave->speed = SPEED_100; |
| slave->duplex = DUPLEX_FULL; |
| |
| if (!slave_dev->ethtool_ops || !slave_dev->ethtool_ops->get_settings) |
| return -1; |
| |
| res = slave_dev->ethtool_ops->get_settings(slave_dev, &etool); |
| if (res < 0) |
| return -1; |
| |
| slave_speed = ethtool_cmd_speed(&etool); |
| switch (slave_speed) { |
| case SPEED_10: |
| case SPEED_100: |
| case SPEED_1000: |
| case SPEED_10000: |
| break; |
| default: |
| return -1; |
| } |
| |
| switch (etool.duplex) { |
| case DUPLEX_FULL: |
| case DUPLEX_HALF: |
| break; |
| default: |
| return -1; |
| } |
| |
| slave->speed = slave_speed; |
| slave->duplex = etool.duplex; |
| |
| return 0; |
| } |
| |
| /* |
| * if <dev> supports MII link status reporting, check its link status. |
| * |
| * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(), |
| * depending upon the setting of the use_carrier parameter. |
| * |
| * Return either BMSR_LSTATUS, meaning that the link is up (or we |
| * can't tell and just pretend it is), or 0, meaning that the link is |
| * down. |
| * |
| * If reporting is non-zero, instead of faking link up, return -1 if |
| * both ETHTOOL and MII ioctls fail (meaning the device does not |
| * support them). If use_carrier is set, return whatever it says. |
| * It'd be nice if there was a good way to tell if a driver supports |
| * netif_carrier, but there really isn't. |
| */ |
| static int bond_check_dev_link(struct bonding *bond, |
| struct net_device *slave_dev, int reporting) |
| { |
| const struct net_device_ops *slave_ops = slave_dev->netdev_ops; |
| int (*ioctl)(struct net_device *, struct ifreq *, int); |
| struct ifreq ifr; |
| struct mii_ioctl_data *mii; |
| |
| if (!reporting && !netif_running(slave_dev)) |
| return 0; |
| |
| if (bond->params.use_carrier) |
| return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0; |
| |
| /* Try to get link status using Ethtool first. */ |
| if (slave_dev->ethtool_ops) { |
| if (slave_dev->ethtool_ops->get_link) { |
| u32 link; |
| |
| link = slave_dev->ethtool_ops->get_link(slave_dev); |
| |
| return link ? BMSR_LSTATUS : 0; |
| } |
| } |
| |
| /* Ethtool can't be used, fallback to MII ioctls. */ |
| ioctl = slave_ops->ndo_do_ioctl; |
| if (ioctl) { |
| /* TODO: set pointer to correct ioctl on a per team member */ |
| /* bases to make this more efficient. that is, once */ |
| /* we determine the correct ioctl, we will always */ |
| /* call it and not the others for that team */ |
| /* member. */ |
| |
| /* |
| * We cannot assume that SIOCGMIIPHY will also read a |
| * register; not all network drivers (e.g., e100) |
| * support that. |
| */ |
| |
| /* Yes, the mii is overlaid on the ifreq.ifr_ifru */ |
| strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ); |
| mii = if_mii(&ifr); |
| if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) { |
| mii->reg_num = MII_BMSR; |
| if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0) |
| return mii->val_out & BMSR_LSTATUS; |
| } |
| } |
| |
| /* |
| * If reporting, report that either there's no dev->do_ioctl, |
| * or both SIOCGMIIREG and get_link failed (meaning that we |
| * cannot report link status). If not reporting, pretend |
| * we're ok. |
| */ |
| return reporting ? -1 : BMSR_LSTATUS; |
| } |
| |
| /*----------------------------- Multicast list ------------------------------*/ |
| |
| /* |
| * Push the promiscuity flag down to appropriate slaves |
| */ |
| static int bond_set_promiscuity(struct bonding *bond, int inc) |
| { |
| int err = 0; |
| if (USES_PRIMARY(bond->params.mode)) { |
| /* write lock already acquired */ |
| if (bond->curr_active_slave) { |
| err = dev_set_promiscuity(bond->curr_active_slave->dev, |
| inc); |
| } |
| } else { |
| struct slave *slave; |
| int i; |
| bond_for_each_slave(bond, slave, i) { |
| err = dev_set_promiscuity(slave->dev, inc); |
| if (err) |
| return err; |
| } |
| } |
| return err; |
| } |
| |
| /* |
| * Push the allmulti flag down to all slaves |
| */ |
| static int bond_set_allmulti(struct bonding *bond, int inc) |
| { |
| int err = 0; |
| if (USES_PRIMARY(bond->params.mode)) { |
| /* write lock already acquired */ |
| if (bond->curr_active_slave) { |
| err = dev_set_allmulti(bond->curr_active_slave->dev, |
| inc); |
| } |
| } else { |
| struct slave *slave; |
| int i; |
| bond_for_each_slave(bond, slave, i) { |
| err = dev_set_allmulti(slave->dev, inc); |
| if (err) |
| return err; |
| } |
| } |
| return err; |
| } |
| |
| /* |
| * Add a Multicast address to slaves |
| * according to mode |
| */ |
| static void bond_mc_add(struct bonding *bond, void *addr) |
| { |
| if (USES_PRIMARY(bond->params.mode)) { |
| /* write lock already acquired */ |
| if (bond->curr_active_slave) |
| dev_mc_add(bond->curr_active_slave->dev, addr); |
| } else { |
| struct slave *slave; |
| int i; |
| |
| bond_for_each_slave(bond, slave, i) |
| dev_mc_add(slave->dev, addr); |
| } |
| } |
| |
| /* |
| * Remove a multicast address from slave |
| * according to mode |
| */ |
| static void bond_mc_del(struct bonding *bond, void *addr) |
| { |
| if (USES_PRIMARY(bond->params.mode)) { |
| /* write lock already acquired */ |
| if (bond->curr_active_slave) |
| dev_mc_del(bond->curr_active_slave->dev, addr); |
| } else { |
| struct slave *slave; |
| int i; |
| bond_for_each_slave(bond, slave, i) { |
| dev_mc_del(slave->dev, addr); |
| } |
| } |
| } |
| |
| |
| static void __bond_resend_igmp_join_requests(struct net_device *dev) |
| { |
| struct in_device *in_dev; |
| |
| rcu_read_lock(); |
| in_dev = __in_dev_get_rcu(dev); |
| if (in_dev) |
| ip_mc_rejoin_groups(in_dev); |
| rcu_read_unlock(); |
| } |
| |
| /* |
| * Retrieve the list of registered multicast addresses for the bonding |
| * device and retransmit an IGMP JOIN request to the current active |
| * slave. |
| */ |
| static void bond_resend_igmp_join_requests(struct bonding *bond) |
| { |
| struct net_device *vlan_dev; |
| struct vlan_entry *vlan; |
| |
| read_lock(&bond->lock); |
| |
| /* rejoin all groups on bond device */ |
| __bond_resend_igmp_join_requests(bond->dev); |
| |
| /* rejoin all groups on vlan devices */ |
| if (bond->vlgrp) { |
| list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { |
| vlan_dev = vlan_group_get_device(bond->vlgrp, |
| vlan->vlan_id); |
| if (vlan_dev) |
| __bond_resend_igmp_join_requests(vlan_dev); |
| } |
| } |
| |
| if (--bond->igmp_retrans > 0) |
| queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5); |
| |
| read_unlock(&bond->lock); |
| } |
| |
| static void bond_resend_igmp_join_requests_delayed(struct work_struct *work) |
| { |
| struct bonding *bond = container_of(work, struct bonding, |
| mcast_work.work); |
| bond_resend_igmp_join_requests(bond); |
| } |
| |
| /* |
| * flush all members of flush->mc_list from device dev->mc_list |
| */ |
| static void bond_mc_list_flush(struct net_device *bond_dev, |
| struct net_device *slave_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct netdev_hw_addr *ha; |
| |
| netdev_for_each_mc_addr(ha, bond_dev) |
| dev_mc_del(slave_dev, ha->addr); |
| |
| if (bond->params.mode == BOND_MODE_8023AD) { |
| /* del lacpdu mc addr from mc list */ |
| u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR; |
| |
| dev_mc_del(slave_dev, lacpdu_multicast); |
| } |
| } |
| |
| /*--------------------------- Active slave change ---------------------------*/ |
| |
| /* |
| * Update the mc list and multicast-related flags for the new and |
| * old active slaves (if any) according to the multicast mode, and |
| * promiscuous flags unconditionally. |
| */ |
| static void bond_mc_swap(struct bonding *bond, struct slave *new_active, |
| struct slave *old_active) |
| { |
| struct netdev_hw_addr *ha; |
| |
| if (!USES_PRIMARY(bond->params.mode)) |
| /* nothing to do - mc list is already up-to-date on |
| * all slaves |
| */ |
| return; |
| |
| if (old_active) { |
| if (bond->dev->flags & IFF_PROMISC) |
| dev_set_promiscuity(old_active->dev, -1); |
| |
| if (bond->dev->flags & IFF_ALLMULTI) |
| dev_set_allmulti(old_active->dev, -1); |
| |
| netdev_for_each_mc_addr(ha, bond->dev) |
| dev_mc_del(old_active->dev, ha->addr); |
| } |
| |
| if (new_active) { |
| /* FIXME: Signal errors upstream. */ |
| if (bond->dev->flags & IFF_PROMISC) |
| dev_set_promiscuity(new_active->dev, 1); |
| |
| if (bond->dev->flags & IFF_ALLMULTI) |
| dev_set_allmulti(new_active->dev, 1); |
| |
| netdev_for_each_mc_addr(ha, bond->dev) |
| dev_mc_add(new_active->dev, ha->addr); |
| } |
| } |
| |
| /* |
| * bond_do_fail_over_mac |
| * |
| * Perform special MAC address swapping for fail_over_mac settings |
| * |
| * Called with RTNL, bond->lock for read, curr_slave_lock for write_bh. |
| */ |
| static void bond_do_fail_over_mac(struct bonding *bond, |
| struct slave *new_active, |
| struct slave *old_active) |
| __releases(&bond->curr_slave_lock) |
| __releases(&bond->lock) |
| __acquires(&bond->lock) |
| __acquires(&bond->curr_slave_lock) |
| { |
| u8 tmp_mac[ETH_ALEN]; |
| struct sockaddr saddr; |
| int rv; |
| |
| switch (bond->params.fail_over_mac) { |
| case BOND_FOM_ACTIVE: |
| if (new_active) |
| memcpy(bond->dev->dev_addr, new_active->dev->dev_addr, |
| new_active->dev->addr_len); |
| break; |
| case BOND_FOM_FOLLOW: |
| /* |
| * if new_active && old_active, swap them |
| * if just old_active, do nothing (going to no active slave) |
| * if just new_active, set new_active to bond's MAC |
| */ |
| if (!new_active) |
| return; |
| |
| write_unlock_bh(&bond->curr_slave_lock); |
| read_unlock(&bond->lock); |
| |
| if (old_active) { |
| memcpy(tmp_mac, new_active->dev->dev_addr, ETH_ALEN); |
| memcpy(saddr.sa_data, old_active->dev->dev_addr, |
| ETH_ALEN); |
| saddr.sa_family = new_active->dev->type; |
| } else { |
| memcpy(saddr.sa_data, bond->dev->dev_addr, ETH_ALEN); |
| saddr.sa_family = bond->dev->type; |
| } |
| |
| rv = dev_set_mac_address(new_active->dev, &saddr); |
| if (rv) { |
| pr_err("%s: Error %d setting MAC of slave %s\n", |
| bond->dev->name, -rv, new_active->dev->name); |
| goto out; |
| } |
| |
| if (!old_active) |
| goto out; |
| |
| memcpy(saddr.sa_data, tmp_mac, ETH_ALEN); |
| saddr.sa_family = old_active->dev->type; |
| |
| rv = dev_set_mac_address(old_active->dev, &saddr); |
| if (rv) |
| pr_err("%s: Error %d setting MAC of slave %s\n", |
| bond->dev->name, -rv, new_active->dev->name); |
| out: |
| read_lock(&bond->lock); |
| write_lock_bh(&bond->curr_slave_lock); |
| break; |
| default: |
| pr_err("%s: bond_do_fail_over_mac impossible: bad policy %d\n", |
| bond->dev->name, bond->params.fail_over_mac); |
| break; |
| } |
| |
| } |
| |
| static bool bond_should_change_active(struct bonding *bond) |
| { |
| struct slave *prim = bond->primary_slave; |
| struct slave *curr = bond->curr_active_slave; |
| |
| if (!prim || !curr || curr->link != BOND_LINK_UP) |
| return true; |
| if (bond->force_primary) { |
| bond->force_primary = false; |
| return true; |
| } |
| if (bond->params.primary_reselect == BOND_PRI_RESELECT_BETTER && |
| (prim->speed < curr->speed || |
| (prim->speed == curr->speed && prim->duplex <= curr->duplex))) |
| return false; |
| if (bond->params.primary_reselect == BOND_PRI_RESELECT_FAILURE) |
| return false; |
| return true; |
| } |
| |
| /** |
| * find_best_interface - select the best available slave to be the active one |
| * @bond: our bonding struct |
| * |
| * Warning: Caller must hold curr_slave_lock for writing. |
| */ |
| static struct slave *bond_find_best_slave(struct bonding *bond) |
| { |
| struct slave *new_active, *old_active; |
| struct slave *bestslave = NULL; |
| int mintime = bond->params.updelay; |
| int i; |
| |
| new_active = bond->curr_active_slave; |
| |
| if (!new_active) { /* there were no active slaves left */ |
| if (bond->slave_cnt > 0) /* found one slave */ |
| new_active = bond->first_slave; |
| else |
| return NULL; /* still no slave, return NULL */ |
| } |
| |
| if ((bond->primary_slave) && |
| bond->primary_slave->link == BOND_LINK_UP && |
| bond_should_change_active(bond)) { |
| new_active = bond->primary_slave; |
| } |
| |
| /* remember where to stop iterating over the slaves */ |
| old_active = new_active; |
| |
| bond_for_each_slave_from(bond, new_active, i, old_active) { |
| if (new_active->link == BOND_LINK_UP) { |
| return new_active; |
| } else if (new_active->link == BOND_LINK_BACK && |
| IS_UP(new_active->dev)) { |
| /* link up, but waiting for stabilization */ |
| if (new_active->delay < mintime) { |
| mintime = new_active->delay; |
| bestslave = new_active; |
| } |
| } |
| } |
| |
| return bestslave; |
| } |
| |
| static bool bond_should_notify_peers(struct bonding *bond) |
| { |
| struct slave *slave = bond->curr_active_slave; |
| |
| pr_debug("bond_should_notify_peers: bond %s slave %s\n", |
| bond->dev->name, slave ? slave->dev->name : "NULL"); |
| |
| if (!slave || !bond->send_peer_notif || |
| test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state)) |
| return false; |
| |
| bond->send_peer_notif--; |
| return true; |
| } |
| |
| /** |
| * change_active_interface - change the active slave into the specified one |
| * @bond: our bonding struct |
| * @new: the new slave to make the active one |
| * |
| * Set the new slave to the bond's settings and unset them on the old |
| * curr_active_slave. |
| * Setting include flags, mc-list, promiscuity, allmulti, etc. |
| * |
| * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP, |
| * because it is apparently the best available slave we have, even though its |
| * updelay hasn't timed out yet. |
| * |
| * If new_active is not NULL, caller must hold bond->lock for read and |
| * curr_slave_lock for write_bh. |
| */ |
| void bond_change_active_slave(struct bonding *bond, struct slave *new_active) |
| { |
| struct slave *old_active = bond->curr_active_slave; |
| |
| if (old_active == new_active) |
| return; |
| |
| if (new_active) { |
| new_active->jiffies = jiffies; |
| |
| if (new_active->link == BOND_LINK_BACK) { |
| if (USES_PRIMARY(bond->params.mode)) { |
| pr_info("%s: making interface %s the new active one %d ms earlier.\n", |
| bond->dev->name, new_active->dev->name, |
| (bond->params.updelay - new_active->delay) * bond->params.miimon); |
| } |
| |
| new_active->delay = 0; |
| new_active->link = BOND_LINK_UP; |
| |
| if (bond->params.mode == BOND_MODE_8023AD) |
| bond_3ad_handle_link_change(new_active, BOND_LINK_UP); |
| |
| if (bond_is_lb(bond)) |
| bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP); |
| } else { |
| if (USES_PRIMARY(bond->params.mode)) { |
| pr_info("%s: making interface %s the new active one.\n", |
| bond->dev->name, new_active->dev->name); |
| } |
| } |
| } |
| |
| if (USES_PRIMARY(bond->params.mode)) |
| bond_mc_swap(bond, new_active, old_active); |
| |
| if (bond_is_lb(bond)) { |
| bond_alb_handle_active_change(bond, new_active); |
| if (old_active) |
| bond_set_slave_inactive_flags(old_active); |
| if (new_active) |
| bond_set_slave_active_flags(new_active); |
| } else { |
| bond->curr_active_slave = new_active; |
| } |
| |
| if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) { |
| if (old_active) |
| bond_set_slave_inactive_flags(old_active); |
| |
| if (new_active) { |
| bool should_notify_peers = false; |
| |
| bond_set_slave_active_flags(new_active); |
| |
| if (bond->params.fail_over_mac) |
| bond_do_fail_over_mac(bond, new_active, |
| old_active); |
| |
| if (netif_running(bond->dev)) { |
| bond->send_peer_notif = |
| bond->params.num_peer_notif; |
| should_notify_peers = |
| bond_should_notify_peers(bond); |
| } |
| |
| write_unlock_bh(&bond->curr_slave_lock); |
| read_unlock(&bond->lock); |
| |
| netdev_bonding_change(bond->dev, NETDEV_BONDING_FAILOVER); |
| if (should_notify_peers) |
| netdev_bonding_change(bond->dev, |
| NETDEV_NOTIFY_PEERS); |
| |
| read_lock(&bond->lock); |
| write_lock_bh(&bond->curr_slave_lock); |
| } |
| } |
| |
| /* resend IGMP joins since active slave has changed or |
| * all were sent on curr_active_slave */ |
| if (((USES_PRIMARY(bond->params.mode) && new_active) || |
| bond->params.mode == BOND_MODE_ROUNDROBIN) && |
| netif_running(bond->dev)) { |
| bond->igmp_retrans = bond->params.resend_igmp; |
| queue_delayed_work(bond->wq, &bond->mcast_work, 0); |
| } |
| } |
| |
| /** |
| * bond_select_active_slave - select a new active slave, if needed |
| * @bond: our bonding struct |
| * |
| * This functions should be called when one of the following occurs: |
| * - The old curr_active_slave has been released or lost its link. |
| * - The primary_slave has got its link back. |
| * - A slave has got its link back and there's no old curr_active_slave. |
| * |
| * Caller must hold bond->lock for read and curr_slave_lock for write_bh. |
| */ |
| void bond_select_active_slave(struct bonding *bond) |
| { |
| struct slave *best_slave; |
| int rv; |
| |
| best_slave = bond_find_best_slave(bond); |
| if (best_slave != bond->curr_active_slave) { |
| bond_change_active_slave(bond, best_slave); |
| rv = bond_set_carrier(bond); |
| if (!rv) |
| return; |
| |
| if (netif_carrier_ok(bond->dev)) { |
| pr_info("%s: first active interface up!\n", |
| bond->dev->name); |
| } else { |
| pr_info("%s: now running without any active interface !\n", |
| bond->dev->name); |
| } |
| } |
| } |
| |
| /*--------------------------- slave list handling ---------------------------*/ |
| |
| /* |
| * This function attaches the slave to the end of list. |
| * |
| * bond->lock held for writing by caller. |
| */ |
| static void bond_attach_slave(struct bonding *bond, struct slave *new_slave) |
| { |
| if (bond->first_slave == NULL) { /* attaching the first slave */ |
| new_slave->next = new_slave; |
| new_slave->prev = new_slave; |
| bond->first_slave = new_slave; |
| } else { |
| new_slave->next = bond->first_slave; |
| new_slave->prev = bond->first_slave->prev; |
| new_slave->next->prev = new_slave; |
| new_slave->prev->next = new_slave; |
| } |
| |
| bond->slave_cnt++; |
| } |
| |
| /* |
| * This function detaches the slave from the list. |
| * WARNING: no check is made to verify if the slave effectively |
| * belongs to <bond>. |
| * Nothing is freed on return, structures are just unchained. |
| * If any slave pointer in bond was pointing to <slave>, |
| * it should be changed by the calling function. |
| * |
| * bond->lock held for writing by caller. |
| */ |
| static void bond_detach_slave(struct bonding *bond, struct slave *slave) |
| { |
| if (slave->next) |
| slave->next->prev = slave->prev; |
| |
| if (slave->prev) |
| slave->prev->next = slave->next; |
| |
| if (bond->first_slave == slave) { /* slave is the first slave */ |
| if (bond->slave_cnt > 1) { /* there are more slave */ |
| bond->first_slave = slave->next; |
| } else { |
| bond->first_slave = NULL; /* slave was the last one */ |
| } |
| } |
| |
| slave->next = NULL; |
| slave->prev = NULL; |
| bond->slave_cnt--; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| static inline int slave_enable_netpoll(struct slave *slave) |
| { |
| struct netpoll *np; |
| int err = 0; |
| |
| np = kzalloc(sizeof(*np), GFP_KERNEL); |
| err = -ENOMEM; |
| if (!np) |
| goto out; |
| |
| np->dev = slave->dev; |
| err = __netpoll_setup(np); |
| if (err) { |
| kfree(np); |
| goto out; |
| } |
| slave->np = np; |
| out: |
| return err; |
| } |
| static inline void slave_disable_netpoll(struct slave *slave) |
| { |
| struct netpoll *np = slave->np; |
| |
| if (!np) |
| return; |
| |
| slave->np = NULL; |
| synchronize_rcu_bh(); |
| __netpoll_cleanup(np); |
| kfree(np); |
| } |
| static inline bool slave_dev_support_netpoll(struct net_device *slave_dev) |
| { |
| if (slave_dev->priv_flags & IFF_DISABLE_NETPOLL) |
| return false; |
| if (!slave_dev->netdev_ops->ndo_poll_controller) |
| return false; |
| return true; |
| } |
| |
| static void bond_poll_controller(struct net_device *bond_dev) |
| { |
| } |
| |
| static void __bond_netpoll_cleanup(struct bonding *bond) |
| { |
| struct slave *slave; |
| int i; |
| |
| bond_for_each_slave(bond, slave, i) |
| if (IS_UP(slave->dev)) |
| slave_disable_netpoll(slave); |
| } |
| static void bond_netpoll_cleanup(struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| |
| read_lock(&bond->lock); |
| __bond_netpoll_cleanup(bond); |
| read_unlock(&bond->lock); |
| } |
| |
| static int bond_netpoll_setup(struct net_device *dev, struct netpoll_info *ni) |
| { |
| struct bonding *bond = netdev_priv(dev); |
| struct slave *slave; |
| int i, err = 0; |
| |
| read_lock(&bond->lock); |
| bond_for_each_slave(bond, slave, i) { |
| err = slave_enable_netpoll(slave); |
| if (err) { |
| __bond_netpoll_cleanup(bond); |
| break; |
| } |
| } |
| read_unlock(&bond->lock); |
| return err; |
| } |
| |
| static struct netpoll_info *bond_netpoll_info(struct bonding *bond) |
| { |
| return bond->dev->npinfo; |
| } |
| |
| #else |
| static inline int slave_enable_netpoll(struct slave *slave) |
| { |
| return 0; |
| } |
| static inline void slave_disable_netpoll(struct slave *slave) |
| { |
| } |
| static void bond_netpoll_cleanup(struct net_device *bond_dev) |
| { |
| } |
| #endif |
| |
| /*---------------------------------- IOCTL ----------------------------------*/ |
| |
| static int bond_sethwaddr(struct net_device *bond_dev, |
| struct net_device *slave_dev) |
| { |
| pr_debug("bond_dev=%p\n", bond_dev); |
| pr_debug("slave_dev=%p\n", slave_dev); |
| pr_debug("slave_dev->addr_len=%d\n", slave_dev->addr_len); |
| memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len); |
| return 0; |
| } |
| |
| static u32 bond_fix_features(struct net_device *dev, u32 features) |
| { |
| struct slave *slave; |
| struct bonding *bond = netdev_priv(dev); |
| u32 mask; |
| int i; |
| |
| read_lock(&bond->lock); |
| |
| if (!bond->first_slave) { |
| /* Disable adding VLANs to empty bond. But why? --mq */ |
| features |= NETIF_F_VLAN_CHALLENGED; |
| goto out; |
| } |
| |
| mask = features; |
| features &= ~NETIF_F_ONE_FOR_ALL; |
| features |= NETIF_F_ALL_FOR_ALL; |
| |
| bond_for_each_slave(bond, slave, i) { |
| features = netdev_increment_features(features, |
| slave->dev->features, |
| mask); |
| } |
| |
| out: |
| read_unlock(&bond->lock); |
| return features; |
| } |
| |
| #define BOND_VLAN_FEATURES (NETIF_F_ALL_TX_OFFLOADS | \ |
| NETIF_F_SOFT_FEATURES | \ |
| NETIF_F_LRO) |
| |
| static void bond_compute_features(struct bonding *bond) |
| { |
| struct slave *slave; |
| struct net_device *bond_dev = bond->dev; |
| u32 vlan_features = BOND_VLAN_FEATURES; |
| unsigned short max_hard_header_len = ETH_HLEN; |
| int i; |
| |
| read_lock(&bond->lock); |
| |
| if (!bond->first_slave) |
| goto done; |
| |
| bond_for_each_slave(bond, slave, i) { |
| vlan_features = netdev_increment_features(vlan_features, |
| slave->dev->vlan_features, BOND_VLAN_FEATURES); |
| |
| if (slave->dev->hard_header_len > max_hard_header_len) |
| max_hard_header_len = slave->dev->hard_header_len; |
| } |
| |
| done: |
| bond_dev->vlan_features = vlan_features; |
| bond_dev->hard_header_len = max_hard_header_len; |
| |
| read_unlock(&bond->lock); |
| |
| netdev_change_features(bond_dev); |
| } |
| |
| static void bond_setup_by_slave(struct net_device *bond_dev, |
| struct net_device *slave_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| |
| bond_dev->header_ops = slave_dev->header_ops; |
| |
| bond_dev->type = slave_dev->type; |
| bond_dev->hard_header_len = slave_dev->hard_header_len; |
| bond_dev->addr_len = slave_dev->addr_len; |
| |
| memcpy(bond_dev->broadcast, slave_dev->broadcast, |
| slave_dev->addr_len); |
| bond->setup_by_slave = 1; |
| } |
| |
| /* On bonding slaves other than the currently active slave, suppress |
| * duplicates except for alb non-mcast/bcast. |
| */ |
| static bool bond_should_deliver_exact_match(struct sk_buff *skb, |
| struct slave *slave, |
| struct bonding *bond) |
| { |
| if (bond_is_slave_inactive(slave)) { |
| if (bond->params.mode == BOND_MODE_ALB && |
| skb->pkt_type != PACKET_BROADCAST && |
| skb->pkt_type != PACKET_MULTICAST) |
| return false; |
| return true; |
| } |
| return false; |
| } |
| |
| static rx_handler_result_t bond_handle_frame(struct sk_buff **pskb) |
| { |
| struct sk_buff *skb = *pskb; |
| struct slave *slave; |
| struct bonding *bond; |
| |
| skb = skb_share_check(skb, GFP_ATOMIC); |
| if (unlikely(!skb)) |
| return RX_HANDLER_CONSUMED; |
| |
| *pskb = skb; |
| |
| slave = bond_slave_get_rcu(skb->dev); |
| bond = slave->bond; |
| |
| if (bond->params.arp_interval) |
| slave->dev->last_rx = jiffies; |
| |
| if (bond->recv_probe) { |
| struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC); |
| |
| if (likely(nskb)) { |
| bond->recv_probe(nskb, bond, slave); |
| dev_kfree_skb(nskb); |
| } |
| } |
| |
| if (bond_should_deliver_exact_match(skb, slave, bond)) { |
| return RX_HANDLER_EXACT; |
| } |
| |
| skb->dev = bond->dev; |
| |
| if (bond->params.mode == BOND_MODE_ALB && |
| bond->dev->priv_flags & IFF_BRIDGE_PORT && |
| skb->pkt_type == PACKET_HOST) { |
| |
| if (unlikely(skb_cow_head(skb, |
| skb->data - skb_mac_header(skb)))) { |
| kfree_skb(skb); |
| return RX_HANDLER_CONSUMED; |
| } |
| memcpy(eth_hdr(skb)->h_dest, bond->dev->dev_addr, ETH_ALEN); |
| } |
| |
| return RX_HANDLER_ANOTHER; |
| } |
| |
| /* enslave device <slave> to bond device <master> */ |
| int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| const struct net_device_ops *slave_ops = slave_dev->netdev_ops; |
| struct slave *new_slave = NULL; |
| struct netdev_hw_addr *ha; |
| struct sockaddr addr; |
| int link_reporting; |
| int res = 0; |
| |
| if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL && |
| slave_ops->ndo_do_ioctl == NULL) { |
| pr_warning("%s: Warning: no link monitoring support for %s\n", |
| bond_dev->name, slave_dev->name); |
| } |
| |
| /* bond must be initialized by bond_open() before enslaving */ |
| if (!(bond_dev->flags & IFF_UP)) { |
| pr_warning("%s: master_dev is not up in bond_enslave\n", |
| bond_dev->name); |
| } |
| |
| /* already enslaved */ |
| if (slave_dev->flags & IFF_SLAVE) { |
| pr_debug("Error, Device was already enslaved\n"); |
| return -EBUSY; |
| } |
| |
| /* vlan challenged mutual exclusion */ |
| /* no need to lock since we're protected by rtnl_lock */ |
| if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) { |
| pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name); |
| if (bond->vlgrp) { |
| pr_err("%s: Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n", |
| bond_dev->name, slave_dev->name, bond_dev->name); |
| return -EPERM; |
| } else { |
| pr_warning("%s: Warning: enslaved VLAN challenged slave %s. Adding VLANs will be blocked as long as %s is part of bond %s\n", |
| bond_dev->name, slave_dev->name, |
| slave_dev->name, bond_dev->name); |
| } |
| } else { |
| pr_debug("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name); |
| } |
| |
| /* |
| * Old ifenslave binaries are no longer supported. These can |
| * be identified with moderate accuracy by the state of the slave: |
| * the current ifenslave will set the interface down prior to |
| * enslaving it; the old ifenslave will not. |
| */ |
| if ((slave_dev->flags & IFF_UP)) { |
| pr_err("%s is up. This may be due to an out of date ifenslave.\n", |
| slave_dev->name); |
| res = -EPERM; |
| goto err_undo_flags; |
| } |
| |
| /* set bonding device ether type by slave - bonding netdevices are |
| * created with ether_setup, so when the slave type is not ARPHRD_ETHER |
| * there is a need to override some of the type dependent attribs/funcs. |
| * |
| * bond ether type mutual exclusion - don't allow slaves of dissimilar |
| * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond |
| */ |
| if (bond->slave_cnt == 0) { |
| if (bond_dev->type != slave_dev->type) { |
| pr_debug("%s: change device type from %d to %d\n", |
| bond_dev->name, |
| bond_dev->type, slave_dev->type); |
| |
| res = netdev_bonding_change(bond_dev, |
| NETDEV_PRE_TYPE_CHANGE); |
| res = notifier_to_errno(res); |
| if (res) { |
| pr_err("%s: refused to change device type\n", |
| bond_dev->name); |
| res = -EBUSY; |
| goto err_undo_flags; |
| } |
| |
| /* Flush unicast and multicast addresses */ |
| dev_uc_flush(bond_dev); |
| dev_mc_flush(bond_dev); |
| |
| if (slave_dev->type != ARPHRD_ETHER) |
| bond_setup_by_slave(bond_dev, slave_dev); |
| else |
| ether_setup(bond_dev); |
| |
| netdev_bonding_change(bond_dev, |
| NETDEV_POST_TYPE_CHANGE); |
| } |
| } else if (bond_dev->type != slave_dev->type) { |
| pr_err("%s ether type (%d) is different from other slaves (%d), can not enslave it.\n", |
| slave_dev->name, |
| slave_dev->type, bond_dev->type); |
| res = -EINVAL; |
| goto err_undo_flags; |
| } |
| |
| if (slave_ops->ndo_set_mac_address == NULL) { |
| if (bond->slave_cnt == 0) { |
| pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.", |
| bond_dev->name); |
| bond->params.fail_over_mac = BOND_FOM_ACTIVE; |
| } else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) { |
| pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n", |
| bond_dev->name); |
| res = -EOPNOTSUPP; |
| goto err_undo_flags; |
| } |
| } |
| |
| call_netdevice_notifiers(NETDEV_JOIN, slave_dev); |
| |
| /* If this is the first slave, then we need to set the master's hardware |
| * address to be the same as the slave's. */ |
| if (is_zero_ether_addr(bond->dev->dev_addr)) |
| memcpy(bond->dev->dev_addr, slave_dev->dev_addr, |
| slave_dev->addr_len); |
| |
| |
| new_slave = kzalloc(sizeof(struct slave), GFP_KERNEL); |
| if (!new_slave) { |
| res = -ENOMEM; |
| goto err_undo_flags; |
| } |
| |
| /* |
| * Set the new_slave's queue_id to be zero. Queue ID mapping |
| * is set via sysfs or module option if desired. |
| */ |
| new_slave->queue_id = 0; |
| |
| /* Save slave's original mtu and then set it to match the bond */ |
| new_slave->original_mtu = slave_dev->mtu; |
| res = dev_set_mtu(slave_dev, bond->dev->mtu); |
| if (res) { |
| pr_debug("Error %d calling dev_set_mtu\n", res); |
| goto err_free; |
| } |
| |
| /* |
| * Save slave's original ("permanent") mac address for modes |
| * that need it, and for restoring it upon release, and then |
| * set it to the master's address |
| */ |
| memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN); |
| |
| if (!bond->params.fail_over_mac) { |
| /* |
| * Set slave to master's mac address. The application already |
| * set the master's mac address to that of the first slave |
| */ |
| memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len); |
| addr.sa_family = slave_dev->type; |
| res = dev_set_mac_address(slave_dev, &addr); |
| if (res) { |
| pr_debug("Error %d calling set_mac_address\n", res); |
| goto err_restore_mtu; |
| } |
| } |
| |
| res = netdev_set_bond_master(slave_dev, bond_dev); |
| if (res) { |
| pr_debug("Error %d calling netdev_set_bond_master\n", res); |
| goto err_restore_mac; |
| } |
| |
| /* open the slave since the application closed it */ |
| res = dev_open(slave_dev); |
| if (res) { |
| pr_debug("Opening slave %s failed\n", slave_dev->name); |
| goto err_unset_master; |
| } |
| |
| new_slave->bond = bond; |
| new_slave->dev = slave_dev; |
| slave_dev->priv_flags |= IFF_BONDING; |
| |
| if (bond_is_lb(bond)) { |
| /* bond_alb_init_slave() must be called before all other stages since |
| * it might fail and we do not want to have to undo everything |
| */ |
| res = bond_alb_init_slave(bond, new_slave); |
| if (res) |
| goto err_close; |
| } |
| |
| /* If the mode USES_PRIMARY, then the new slave gets the |
| * master's promisc (and mc) settings only if it becomes the |
| * curr_active_slave, and that is taken care of later when calling |
| * bond_change_active() |
| */ |
| if (!USES_PRIMARY(bond->params.mode)) { |
| /* set promiscuity level to new slave */ |
| if (bond_dev->flags & IFF_PROMISC) { |
| res = dev_set_promiscuity(slave_dev, 1); |
| if (res) |
| goto err_close; |
| } |
| |
| /* set allmulti level to new slave */ |
| if (bond_dev->flags & IFF_ALLMULTI) { |
| res = dev_set_allmulti(slave_dev, 1); |
| if (res) |
| goto err_close; |
| } |
| |
| netif_addr_lock_bh(bond_dev); |
| /* upload master's mc_list to new slave */ |
| netdev_for_each_mc_addr(ha, bond_dev) |
| dev_mc_add(slave_dev, ha->addr); |
| netif_addr_unlock_bh(bond_dev); |
| } |
| |
| if (bond->params.mode == BOND_MODE_8023AD) { |
| /* add lacpdu mc addr to mc list */ |
| u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR; |
| |
| dev_mc_add(slave_dev, lacpdu_multicast); |
| } |
| |
| bond_add_vlans_on_slave(bond, slave_dev); |
| |
| write_lock_bh(&bond->lock); |
| |
| bond_attach_slave(bond, new_slave); |
| |
| new_slave->delay = 0; |
| new_slave->link_failure_count = 0; |
| |
| write_unlock_bh(&bond->lock); |
| |
| bond_compute_features(bond); |
| |
| read_lock(&bond->lock); |
| |
| new_slave->last_arp_rx = jiffies; |
| |
| if (bond->params.miimon && !bond->params.use_carrier) { |
| link_reporting = bond_check_dev_link(bond, slave_dev, 1); |
| |
| if ((link_reporting == -1) && !bond->params.arp_interval) { |
| /* |
| * miimon is set but a bonded network driver |
| * does not support ETHTOOL/MII and |
| * arp_interval is not set. Note: if |
| * use_carrier is enabled, we will never go |
| * here (because netif_carrier is always |
| * supported); thus, we don't need to change |
| * the messages for netif_carrier. |
| */ |
| pr_warning("%s: Warning: MII and ETHTOOL support not available for interface %s, and arp_interval/arp_ip_target module parameters not specified, thus bonding will not detect link failures! see bonding.txt for details.\n", |
| bond_dev->name, slave_dev->name); |
| } else if (link_reporting == -1) { |
| /* unable get link status using mii/ethtool */ |
| pr_warning("%s: Warning: can't get link status from interface %s; the network driver associated with this interface does not support MII or ETHTOOL link status reporting, thus miimon has no effect on this interface.\n", |
| bond_dev->name, slave_dev->name); |
| } |
| } |
| |
| /* check for initial state */ |
| if (!bond->params.miimon || |
| (bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS)) { |
| if (bond->params.updelay) { |
| pr_debug("Initial state of slave_dev is BOND_LINK_BACK\n"); |
| new_slave->link = BOND_LINK_BACK; |
| new_slave->delay = bond->params.updelay; |
| } else { |
| pr_debug("Initial state of slave_dev is BOND_LINK_UP\n"); |
| new_slave->link = BOND_LINK_UP; |
| } |
| new_slave->jiffies = jiffies; |
| } else { |
| pr_debug("Initial state of slave_dev is BOND_LINK_DOWN\n"); |
| new_slave->link = BOND_LINK_DOWN; |
| } |
| |
| if (bond_update_speed_duplex(new_slave) && |
| (new_slave->link != BOND_LINK_DOWN)) { |
| pr_warning("%s: Warning: failed to get speed and duplex from %s, assumed to be 100Mb/sec and Full.\n", |
| bond_dev->name, new_slave->dev->name); |
| |
| if (bond->params.mode == BOND_MODE_8023AD) { |
| pr_warning("%s: Warning: Operation of 802.3ad mode requires ETHTOOL support in base driver for proper aggregator selection.\n", |
| bond_dev->name); |
| } |
| } |
| |
| if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) { |
| /* if there is a primary slave, remember it */ |
| if (strcmp(bond->params.primary, new_slave->dev->name) == 0) { |
| bond->primary_slave = new_slave; |
| bond->force_primary = true; |
| } |
| } |
| |
| write_lock_bh(&bond->curr_slave_lock); |
| |
| switch (bond->params.mode) { |
| case BOND_MODE_ACTIVEBACKUP: |
| bond_set_slave_inactive_flags(new_slave); |
| bond_select_active_slave(bond); |
| break; |
| case BOND_MODE_8023AD: |
| /* in 802.3ad mode, the internal mechanism |
| * will activate the slaves in the selected |
| * aggregator |
| */ |
| bond_set_slave_inactive_flags(new_slave); |
| /* if this is the first slave */ |
| if (bond->slave_cnt == 1) { |
| SLAVE_AD_INFO(new_slave).id = 1; |
| /* Initialize AD with the number of times that the AD timer is called in 1 second |
| * can be called only after the mac address of the bond is set |
| */ |
| bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL, |
| bond->params.lacp_fast); |
| } else { |
| SLAVE_AD_INFO(new_slave).id = |
| SLAVE_AD_INFO(new_slave->prev).id + 1; |
| } |
| |
| bond_3ad_bind_slave(new_slave); |
| break; |
| case BOND_MODE_TLB: |
| case BOND_MODE_ALB: |
| bond_set_active_slave(new_slave); |
| bond_set_slave_inactive_flags(new_slave); |
| bond_select_active_slave(bond); |
| break; |
| default: |
| pr_debug("This slave is always active in trunk mode\n"); |
| |
| /* always active in trunk mode */ |
| bond_set_active_slave(new_slave); |
| |
| /* In trunking mode there is little meaning to curr_active_slave |
| * anyway (it holds no special properties of the bond device), |
| * so we can change it without calling change_active_interface() |
| */ |
| if (!bond->curr_active_slave) |
| bond->curr_active_slave = new_slave; |
| |
| break; |
| } /* switch(bond_mode) */ |
| |
| write_unlock_bh(&bond->curr_slave_lock); |
| |
| bond_set_carrier(bond); |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| slave_dev->npinfo = bond_netpoll_info(bond); |
| if (slave_dev->npinfo) { |
| if (slave_enable_netpoll(new_slave)) { |
| read_unlock(&bond->lock); |
| pr_info("Error, %s: master_dev is using netpoll, " |
| "but new slave device does not support netpoll.\n", |
| bond_dev->name); |
| res = -EBUSY; |
| goto err_close; |
| } |
| } |
| #endif |
| |
| read_unlock(&bond->lock); |
| |
| res = bond_create_slave_symlinks(bond_dev, slave_dev); |
| if (res) |
| goto err_close; |
| |
| res = netdev_rx_handler_register(slave_dev, bond_handle_frame, |
| new_slave); |
| if (res) { |
| pr_debug("Error %d calling netdev_rx_handler_register\n", res); |
| goto err_dest_symlinks; |
| } |
| |
| pr_info("%s: enslaving %s as a%s interface with a%s link.\n", |
| bond_dev->name, slave_dev->name, |
| bond_is_active_slave(new_slave) ? "n active" : " backup", |
| new_slave->link != BOND_LINK_DOWN ? "n up" : " down"); |
| |
| /* enslave is successful */ |
| return 0; |
| |
| /* Undo stages on error */ |
| err_dest_symlinks: |
| bond_destroy_slave_symlinks(bond_dev, slave_dev); |
| |
| err_close: |
| dev_close(slave_dev); |
| |
| err_unset_master: |
| netdev_set_bond_master(slave_dev, NULL); |
| |
| err_restore_mac: |
| if (!bond->params.fail_over_mac) { |
| /* XXX TODO - fom follow mode needs to change master's |
| * MAC if this slave's MAC is in use by the bond, or at |
| * least print a warning. |
| */ |
| memcpy(addr.sa_data, new_slave->perm_hwaddr, ETH_ALEN); |
| addr.sa_family = slave_dev->type; |
| dev_set_mac_address(slave_dev, &addr); |
| } |
| |
| err_restore_mtu: |
| dev_set_mtu(slave_dev, new_slave->original_mtu); |
| |
| err_free: |
| kfree(new_slave); |
| |
| err_undo_flags: |
| bond_compute_features(bond); |
| |
| return res; |
| } |
| |
| /* |
| * Try to release the slave device <slave> from the bond device <master> |
| * It is legal to access curr_active_slave without a lock because all the function |
| * is write-locked. |
| * |
| * The rules for slave state should be: |
| * for Active/Backup: |
| * Active stays on all backups go down |
| * for Bonded connections: |
| * The first up interface should be left on and all others downed. |
| */ |
| int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *slave, *oldcurrent; |
| struct sockaddr addr; |
| u32 old_features = bond_dev->features; |
| |
| /* slave is not a slave or master is not master of this slave */ |
| if (!(slave_dev->flags & IFF_SLAVE) || |
| (slave_dev->master != bond_dev)) { |
| pr_err("%s: Error: cannot release %s.\n", |
| bond_dev->name, slave_dev->name); |
| return -EINVAL; |
| } |
| |
| block_netpoll_tx(); |
| netdev_bonding_change(bond_dev, NETDEV_BONDING_DESLAVE); |
| write_lock_bh(&bond->lock); |
| |
| slave = bond_get_slave_by_dev(bond, slave_dev); |
| if (!slave) { |
| /* not a slave of this bond */ |
| pr_info("%s: %s not enslaved\n", |
| bond_dev->name, slave_dev->name); |
| write_unlock_bh(&bond->lock); |
| unblock_netpoll_tx(); |
| return -EINVAL; |
| } |
| |
| /* unregister rx_handler early so bond_handle_frame wouldn't be called |
| * for this slave anymore. |
| */ |
| netdev_rx_handler_unregister(slave_dev); |
| write_unlock_bh(&bond->lock); |
| synchronize_net(); |
| write_lock_bh(&bond->lock); |
| |
| if (!bond->params.fail_over_mac) { |
| if (!compare_ether_addr(bond_dev->dev_addr, slave->perm_hwaddr) && |
| bond->slave_cnt > 1) |
| pr_warning("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n", |
| bond_dev->name, slave_dev->name, |
| slave->perm_hwaddr, |
| bond_dev->name, slave_dev->name); |
| } |
| |
| /* Inform AD package of unbinding of slave. */ |
| if (bond->params.mode == BOND_MODE_8023AD) { |
| /* must be called before the slave is |
| * detached from the list |
| */ |
| bond_3ad_unbind_slave(slave); |
| } |
| |
| pr_info("%s: releasing %s interface %s\n", |
| bond_dev->name, |
| bond_is_active_slave(slave) ? "active" : "backup", |
| slave_dev->name); |
| |
| oldcurrent = bond->curr_active_slave; |
| |
| bond->current_arp_slave = NULL; |
| |
| /* release the slave from its bond */ |
| bond_detach_slave(bond, slave); |
| |
| if (bond->primary_slave == slave) |
| bond->primary_slave = NULL; |
| |
| if (oldcurrent == slave) |
| bond_change_active_slave(bond, NULL); |
| |
| if (bond_is_lb(bond)) { |
| /* Must be called only after the slave has been |
| * detached from the list and the curr_active_slave |
| * has been cleared (if our_slave == old_current), |
| * but before a new active slave is selected. |
| */ |
| write_unlock_bh(&bond->lock); |
| bond_alb_deinit_slave(bond, slave); |
| write_lock_bh(&bond->lock); |
| } |
| |
| if (oldcurrent == slave) { |
| /* |
| * Note that we hold RTNL over this sequence, so there |
| * is no concern that another slave add/remove event |
| * will interfere. |
| */ |
| write_unlock_bh(&bond->lock); |
| read_lock(&bond->lock); |
| write_lock_bh(&bond->curr_slave_lock); |
| |
| bond_select_active_slave(bond); |
| |
| write_unlock_bh(&bond->curr_slave_lock); |
| read_unlock(&bond->lock); |
| write_lock_bh(&bond->lock); |
| } |
| |
| if (bond->slave_cnt == 0) { |
| bond_set_carrier(bond); |
| |
| /* if the last slave was removed, zero the mac address |
| * of the master so it will be set by the application |
| * to the mac address of the first slave |
| */ |
| memset(bond_dev->dev_addr, 0, bond_dev->addr_len); |
| |
| if (bond->vlgrp) { |
| pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n", |
| bond_dev->name, bond_dev->name); |
| pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n", |
| bond_dev->name); |
| } |
| } |
| |
| write_unlock_bh(&bond->lock); |
| unblock_netpoll_tx(); |
| |
| bond_compute_features(bond); |
| if (!(bond_dev->features & NETIF_F_VLAN_CHALLENGED) && |
| (old_features & NETIF_F_VLAN_CHALLENGED)) |
| pr_info("%s: last VLAN challenged slave %s left bond %s. VLAN blocking is removed\n", |
| bond_dev->name, slave_dev->name, bond_dev->name); |
| |
| /* must do this from outside any spinlocks */ |
| bond_destroy_slave_symlinks(bond_dev, slave_dev); |
| |
| bond_del_vlans_from_slave(bond, slave_dev); |
| |
| /* If the mode USES_PRIMARY, then we should only remove its |
| * promisc and mc settings if it was the curr_active_slave, but that was |
| * already taken care of above when we detached the slave |
| */ |
| if (!USES_PRIMARY(bond->params.mode)) { |
| /* unset promiscuity level from slave */ |
| if (bond_dev->flags & IFF_PROMISC) |
| dev_set_promiscuity(slave_dev, -1); |
| |
| /* unset allmulti level from slave */ |
| if (bond_dev->flags & IFF_ALLMULTI) |
| dev_set_allmulti(slave_dev, -1); |
| |
| /* flush master's mc_list from slave */ |
| netif_addr_lock_bh(bond_dev); |
| bond_mc_list_flush(bond_dev, slave_dev); |
| netif_addr_unlock_bh(bond_dev); |
| } |
| |
| netdev_set_bond_master(slave_dev, NULL); |
| |
| slave_disable_netpoll(slave); |
| |
| /* close slave before restoring its mac address */ |
| dev_close(slave_dev); |
| |
| if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) { |
| /* restore original ("permanent") mac address */ |
| memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); |
| addr.sa_family = slave_dev->type; |
| dev_set_mac_address(slave_dev, &addr); |
| } |
| |
| dev_set_mtu(slave_dev, slave->original_mtu); |
| |
| slave_dev->priv_flags &= ~IFF_BONDING; |
| |
| kfree(slave); |
| |
| return 0; /* deletion OK */ |
| } |
| |
| /* |
| * First release a slave and then destroy the bond if no more slaves are left. |
| * Must be under rtnl_lock when this function is called. |
| */ |
| static int bond_release_and_destroy(struct net_device *bond_dev, |
| struct net_device *slave_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| int ret; |
| |
| ret = bond_release(bond_dev, slave_dev); |
| if ((ret == 0) && (bond->slave_cnt == 0)) { |
| bond_dev->priv_flags |= IFF_DISABLE_NETPOLL; |
| pr_info("%s: destroying bond %s.\n", |
| bond_dev->name, bond_dev->name); |
| unregister_netdevice(bond_dev); |
| } |
| return ret; |
| } |
| |
| /* |
| * This function releases all slaves. |
| */ |
| static int bond_release_all(struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *slave; |
| struct net_device *slave_dev; |
| struct sockaddr addr; |
| |
| write_lock_bh(&bond->lock); |
| |
| netif_carrier_off(bond_dev); |
| |
| if (bond->slave_cnt == 0) |
| goto out; |
| |
| bond->current_arp_slave = NULL; |
| bond->primary_slave = NULL; |
| bond_change_active_slave(bond, NULL); |
| |
| while ((slave = bond->first_slave) != NULL) { |
| /* Inform AD package of unbinding of slave |
| * before slave is detached from the list. |
| */ |
| if (bond->params.mode == BOND_MODE_8023AD) |
| bond_3ad_unbind_slave(slave); |
| |
| slave_dev = slave->dev; |
| bond_detach_slave(bond, slave); |
| |
| /* now that the slave is detached, unlock and perform |
| * all the undo steps that should not be called from |
| * within a lock. |
| */ |
| write_unlock_bh(&bond->lock); |
| |
| /* unregister rx_handler early so bond_handle_frame wouldn't |
| * be called for this slave anymore. |
| */ |
| netdev_rx_handler_unregister(slave_dev); |
| synchronize_net(); |
| |
| if (bond_is_lb(bond)) { |
| /* must be called only after the slave |
| * has been detached from the list |
| */ |
| bond_alb_deinit_slave(bond, slave); |
| } |
| |
| bond_destroy_slave_symlinks(bond_dev, slave_dev); |
| bond_del_vlans_from_slave(bond, slave_dev); |
| |
| /* If the mode USES_PRIMARY, then we should only remove its |
| * promisc and mc settings if it was the curr_active_slave, but that was |
| * already taken care of above when we detached the slave |
| */ |
| if (!USES_PRIMARY(bond->params.mode)) { |
| /* unset promiscuity level from slave */ |
| if (bond_dev->flags & IFF_PROMISC) |
| dev_set_promiscuity(slave_dev, -1); |
| |
| /* unset allmulti level from slave */ |
| if (bond_dev->flags & IFF_ALLMULTI) |
| dev_set_allmulti(slave_dev, -1); |
| |
| /* flush master's mc_list from slave */ |
| netif_addr_lock_bh(bond_dev); |
| bond_mc_list_flush(bond_dev, slave_dev); |
| netif_addr_unlock_bh(bond_dev); |
| } |
| |
| netdev_set_bond_master(slave_dev, NULL); |
| |
| slave_disable_netpoll(slave); |
| |
| /* close slave before restoring its mac address */ |
| dev_close(slave_dev); |
| |
| if (!bond->params.fail_over_mac) { |
| /* restore original ("permanent") mac address*/ |
| memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); |
| addr.sa_family = slave_dev->type; |
| dev_set_mac_address(slave_dev, &addr); |
| } |
| |
| kfree(slave); |
| |
| /* re-acquire the lock before getting the next slave */ |
| write_lock_bh(&bond->lock); |
| } |
| |
| /* zero the mac address of the master so it will be |
| * set by the application to the mac address of the |
| * first slave |
| */ |
| memset(bond_dev->dev_addr, 0, bond_dev->addr_len); |
| |
| if (bond->vlgrp) { |
| pr_warning("%s: Warning: clearing HW address of %s while it still has VLANs.\n", |
| bond_dev->name, bond_dev->name); |
| pr_warning("%s: When re-adding slaves, make sure the bond's HW address matches its VLANs'.\n", |
| bond_dev->name); |
| } |
| |
| pr_info("%s: released all slaves\n", bond_dev->name); |
| |
| out: |
| write_unlock_bh(&bond->lock); |
| |
| bond_compute_features(bond); |
| |
| return 0; |
| } |
| |
| /* |
| * This function changes the active slave to slave <slave_dev>. |
| * It returns -EINVAL in the following cases. |
| * - <slave_dev> is not found in the list. |
| * - There is not active slave now. |
| * - <slave_dev> is already active. |
| * - The link state of <slave_dev> is not BOND_LINK_UP. |
| * - <slave_dev> is not running. |
| * In these cases, this function does nothing. |
| * In the other cases, current_slave pointer is changed and 0 is returned. |
| */ |
| static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_device *slave_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *old_active = NULL; |
| struct slave *new_active = NULL; |
| int res = 0; |
| |
| if (!USES_PRIMARY(bond->params.mode)) |
| return -EINVAL; |
| |
| /* Verify that master_dev is indeed the master of slave_dev */ |
| if (!(slave_dev->flags & IFF_SLAVE) || (slave_dev->master != bond_dev)) |
| return -EINVAL; |
| |
| read_lock(&bond->lock); |
| |
| read_lock(&bond->curr_slave_lock); |
| old_active = bond->curr_active_slave; |
| read_unlock(&bond->curr_slave_lock); |
| |
| new_active = bond_get_slave_by_dev(bond, slave_dev); |
| |
| /* |
| * Changing to the current active: do nothing; return success. |
| */ |
| if (new_active && (new_active == old_active)) { |
| read_unlock(&bond->lock); |
| return 0; |
| } |
| |
| if ((new_active) && |
| (old_active) && |
| (new_active->link == BOND_LINK_UP) && |
| IS_UP(new_active->dev)) { |
| block_netpoll_tx(); |
| write_lock_bh(&bond->curr_slave_lock); |
| bond_change_active_slave(bond, new_active); |
| write_unlock_bh(&bond->curr_slave_lock); |
| unblock_netpoll_tx(); |
| } else |
| res = -EINVAL; |
| |
| read_unlock(&bond->lock); |
| |
| return res; |
| } |
| |
| static int bond_info_query(struct net_device *bond_dev, struct ifbond *info) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| |
| info->bond_mode = bond->params.mode; |
| info->miimon = bond->params.miimon; |
| |
| read_lock(&bond->lock); |
| info->num_slaves = bond->slave_cnt; |
| read_unlock(&bond->lock); |
| |
| return 0; |
| } |
| |
| static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *slave; |
| int i, res = -ENODEV; |
| |
| read_lock(&bond->lock); |
| |
| bond_for_each_slave(bond, slave, i) { |
| if (i == (int)info->slave_id) { |
| res = 0; |
| strcpy(info->slave_name, slave->dev->name); |
| info->link = slave->link; |
| info->state = bond_slave_state(slave); |
| info->link_failure_count = slave->link_failure_count; |
| break; |
| } |
| } |
| |
| read_unlock(&bond->lock); |
| |
| return res; |
| } |
| |
| /*-------------------------------- Monitoring -------------------------------*/ |
| |
| |
| static int bond_miimon_inspect(struct bonding *bond) |
| { |
| struct slave *slave; |
| int i, link_state, commit = 0; |
| bool ignore_updelay; |
| |
| ignore_updelay = !bond->curr_active_slave ? true : false; |
| |
| bond_for_each_slave(bond, slave, i) { |
| slave->new_link = BOND_LINK_NOCHANGE; |
| |
| link_state = bond_check_dev_link(bond, slave->dev, 0); |
| |
| switch (slave->link) { |
| case BOND_LINK_UP: |
| if (link_state) |
| continue; |
| |
| slave->link = BOND_LINK_FAIL; |
| slave->delay = bond->params.downdelay; |
| if (slave->delay) { |
| pr_info("%s: link status down for %sinterface %s, disabling it in %d ms.\n", |
| bond->dev->name, |
| (bond->params.mode == |
| BOND_MODE_ACTIVEBACKUP) ? |
| (bond_is_active_slave(slave) ? |
| "active " : "backup ") : "", |
| slave->dev->name, |
| bond->params.downdelay * bond->params.miimon); |
| } |
| /*FALLTHRU*/ |
| case BOND_LINK_FAIL: |
| if (link_state) { |
| /* |
| * recovered before downdelay expired |
| */ |
| slave->link = BOND_LINK_UP; |
| slave->jiffies = jiffies; |
| pr_info("%s: link status up again after %d ms for interface %s.\n", |
| bond->dev->name, |
| (bond->params.downdelay - slave->delay) * |
| bond->params.miimon, |
| slave->dev->name); |
| continue; |
| } |
| |
| if (slave->delay <= 0) { |
| slave->new_link = BOND_LINK_DOWN; |
| commit++; |
| continue; |
| } |
| |
| slave->delay--; |
| break; |
| |
| case BOND_LINK_DOWN: |
| if (!link_state) |
| continue; |
| |
| slave->link = BOND_LINK_BACK; |
| slave->delay = bond->params.updelay; |
| |
| if (slave->delay) { |
| pr_info("%s: link status up for interface %s, enabling it in %d ms.\n", |
| bond->dev->name, slave->dev->name, |
| ignore_updelay ? 0 : |
| bond->params.updelay * |
| bond->params.miimon); |
| } |
| /*FALLTHRU*/ |
| case BOND_LINK_BACK: |
| if (!link_state) { |
| slave->link = BOND_LINK_DOWN; |
| pr_info("%s: link status down again after %d ms for interface %s.\n", |
| bond->dev->name, |
| (bond->params.updelay - slave->delay) * |
| bond->params.miimon, |
| slave->dev->name); |
| |
| continue; |
| } |
| |
| if (ignore_updelay) |
| slave->delay = 0; |
| |
| if (slave->delay <= 0) { |
| slave->new_link = BOND_LINK_UP; |
| commit++; |
| ignore_updelay = false; |
| continue; |
| } |
| |
| slave->delay--; |
| break; |
| } |
| } |
| |
| return commit; |
| } |
| |
| static void bond_miimon_commit(struct bonding *bond) |
| { |
| struct slave *slave; |
| int i; |
| |
| bond_for_each_slave(bond, slave, i) { |
| switch (slave->new_link) { |
| case BOND_LINK_NOCHANGE: |
| continue; |
| |
| case BOND_LINK_UP: |
| slave->link = BOND_LINK_UP; |
| slave->jiffies = jiffies; |
| |
| if (bond->params.mode == BOND_MODE_8023AD) { |
| /* prevent it from being the active one */ |
| bond_set_backup_slave(slave); |
| } else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) { |
| /* make it immediately active */ |
| bond_set_active_slave(slave); |
| } else if (slave != bond->primary_slave) { |
| /* prevent it from being the active one */ |
| bond_set_backup_slave(slave); |
| } |
| |
| bond_update_speed_duplex(slave); |
| |
| pr_info("%s: link status definitely up for interface %s, %u Mbps %s duplex.\n", |
| bond->dev->name, slave->dev->name, |
| slave->speed, slave->duplex ? "full" : "half"); |
| |
| /* notify ad that the link status has changed */ |
| if (bond->params.mode == BOND_MODE_8023AD) |
| bond_3ad_handle_link_change(slave, BOND_LINK_UP); |
| |
| if (bond_is_lb(bond)) |
| bond_alb_handle_link_change(bond, slave, |
| BOND_LINK_UP); |
| |
| if (!bond->curr_active_slave || |
| (slave == bond->primary_slave)) |
| goto do_failover; |
| |
| continue; |
| |
| case BOND_LINK_DOWN: |
| if (slave->link_failure_count < UINT_MAX) |
| slave->link_failure_count++; |
| |
| slave->link = BOND_LINK_DOWN; |
| |
| if (bond->params.mode == BOND_MODE_ACTIVEBACKUP || |
| bond->params.mode == BOND_MODE_8023AD) |
| bond_set_slave_inactive_flags(slave); |
| |
| pr_info("%s: link status definitely down for interface %s, disabling it\n", |
| bond->dev->name, slave->dev->name); |
| |
| if (bond->params.mode == BOND_MODE_8023AD) |
| bond_3ad_handle_link_change(slave, |
| BOND_LINK_DOWN); |
| |
| if (bond_is_lb(bond)) |
| bond_alb_handle_link_change(bond, slave, |
| BOND_LINK_DOWN); |
| |
| if (slave == bond->curr_active_slave) |
| goto do_failover; |
| |
| continue; |
| |
| default: |
| pr_err("%s: invalid new link %d on slave %s\n", |
| bond->dev->name, slave->new_link, |
| slave->dev->name); |
| slave->new_link = BOND_LINK_NOCHANGE; |
| |
| continue; |
| } |
| |
| do_failover: |
| ASSERT_RTNL(); |
| block_netpoll_tx(); |
| write_lock_bh(&bond->curr_slave_lock); |
| bond_select_active_slave(bond); |
| write_unlock_bh(&bond->curr_slave_lock); |
| unblock_netpoll_tx(); |
| } |
| |
| bond_set_carrier(bond); |
| } |
| |
| /* |
| * bond_mii_monitor |
| * |
| * Really a wrapper that splits the mii monitor into two phases: an |
| * inspection, then (if inspection indicates something needs to be done) |
| * an acquisition of appropriate locks followed by a commit phase to |
| * implement whatever link state changes are indicated. |
| */ |
| void bond_mii_monitor(struct work_struct *work) |
| { |
| struct bonding *bond = container_of(work, struct bonding, |
| mii_work.work); |
| bool should_notify_peers = false; |
| |
| read_lock(&bond->lock); |
| if (bond->kill_timers) |
| goto out; |
| |
| if (bond->slave_cnt == 0) |
| goto re_arm; |
| |
| should_notify_peers = bond_should_notify_peers(bond); |
| |
| if (bond_miimon_inspect(bond)) { |
| read_unlock(&bond->lock); |
| rtnl_lock(); |
| read_lock(&bond->lock); |
| |
| bond_miimon_commit(bond); |
| |
| read_unlock(&bond->lock); |
| rtnl_unlock(); /* might sleep, hold no other locks */ |
| read_lock(&bond->lock); |
| } |
| |
| re_arm: |
| if (bond->params.miimon) |
| queue_delayed_work(bond->wq, &bond->mii_work, |
| msecs_to_jiffies(bond->params.miimon)); |
| out: |
| read_unlock(&bond->lock); |
| |
| if (should_notify_peers) { |
| rtnl_lock(); |
| netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS); |
| rtnl_unlock(); |
| } |
| } |
| |
| static __be32 bond_glean_dev_ip(struct net_device *dev) |
| { |
| struct in_device *idev; |
| struct in_ifaddr *ifa; |
| __be32 addr = 0; |
| |
| if (!dev) |
| return 0; |
| |
| rcu_read_lock(); |
| idev = __in_dev_get_rcu(dev); |
| if (!idev) |
| goto out; |
| |
| ifa = idev->ifa_list; |
| if (!ifa) |
| goto out; |
| |
| addr = ifa->ifa_local; |
| out: |
| rcu_read_unlock(); |
| return addr; |
| } |
| |
| static int bond_has_this_ip(struct bonding *bond, __be32 ip) |
| { |
| struct vlan_entry *vlan; |
| |
| if (ip == bond->master_ip) |
| return 1; |
| |
| list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { |
| if (ip == vlan->vlan_ip) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * We go to the (large) trouble of VLAN tagging ARP frames because |
| * switches in VLAN mode (especially if ports are configured as |
| * "native" to a VLAN) might not pass non-tagged frames. |
| */ |
| static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ip, __be32 src_ip, unsigned short vlan_id) |
| { |
| struct sk_buff *skb; |
| |
| pr_debug("arp %d on slave %s: dst %x src %x vid %d\n", arp_op, |
| slave_dev->name, dest_ip, src_ip, vlan_id); |
| |
| skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip, |
| NULL, slave_dev->dev_addr, NULL); |
| |
| if (!skb) { |
| pr_err("ARP packet allocation failed\n"); |
| return; |
| } |
| if (vlan_id) { |
| skb = vlan_put_tag(skb, vlan_id); |
| if (!skb) { |
| pr_err("failed to insert VLAN tag\n"); |
| return; |
| } |
| } |
| arp_xmit(skb); |
| } |
| |
| |
| static void bond_arp_send_all(struct bonding *bond, struct slave *slave) |
| { |
| int i, vlan_id; |
| __be32 *targets = bond->params.arp_targets; |
| struct vlan_entry *vlan; |
| struct net_device *vlan_dev; |
| struct rtable *rt; |
| |
| for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) { |
| if (!targets[i]) |
| break; |
| pr_debug("basa: target %x\n", targets[i]); |
| if (!bond->vlgrp) { |
| pr_debug("basa: empty vlan: arp_send\n"); |
| bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], |
| bond->master_ip, 0); |
| continue; |
| } |
| |
| /* |
| * If VLANs are configured, we do a route lookup to |
| * determine which VLAN interface would be used, so we |
| * can tag the ARP with the proper VLAN tag. |
| */ |
| rt = ip_route_output(dev_net(bond->dev), targets[i], 0, |
| RTO_ONLINK, 0); |
| if (IS_ERR(rt)) { |
| if (net_ratelimit()) { |
| pr_warning("%s: no route to arp_ip_target %pI4\n", |
| bond->dev->name, &targets[i]); |
| } |
| continue; |
| } |
| |
| /* |
| * This target is not on a VLAN |
| */ |
| if (rt->dst.dev == bond->dev) { |
| ip_rt_put(rt); |
| pr_debug("basa: rtdev == bond->dev: arp_send\n"); |
| bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], |
| bond->master_ip, 0); |
| continue; |
| } |
| |
| vlan_id = 0; |
| list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { |
| vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id); |
| if (vlan_dev == rt->dst.dev) { |
| vlan_id = vlan->vlan_id; |
| pr_debug("basa: vlan match on %s %d\n", |
| vlan_dev->name, vlan_id); |
| break; |
| } |
| } |
| |
| if (vlan_id) { |
| ip_rt_put(rt); |
| bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i], |
| vlan->vlan_ip, vlan_id); |
| continue; |
| } |
| |
| if (net_ratelimit()) { |
| pr_warning("%s: no path to arp_ip_target %pI4 via rt.dev %s\n", |
| bond->dev->name, &targets[i], |
| rt->dst.dev ? rt->dst.dev->name : "NULL"); |
| } |
| ip_rt_put(rt); |
| } |
| } |
| |
| static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip) |
| { |
| int i; |
| __be32 *targets = bond->params.arp_targets; |
| |
| for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) { |
| pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n", |
| &sip, &tip, i, &targets[i], |
| bond_has_this_ip(bond, tip)); |
| if (sip == targets[i]) { |
| if (bond_has_this_ip(bond, tip)) |
| slave->last_arp_rx = jiffies; |
| return; |
| } |
| } |
| } |
| |
| static void bond_arp_rcv(struct sk_buff *skb, struct bonding *bond, |
| struct slave *slave) |
| { |
| struct arphdr *arp; |
| unsigned char *arp_ptr; |
| __be32 sip, tip; |
| |
| if (skb->protocol != __cpu_to_be16(ETH_P_ARP)) |
| return; |
| |
| read_lock(&bond->lock); |
| |
| pr_debug("bond_arp_rcv: bond %s skb->dev %s\n", |
| bond->dev->name, skb->dev->name); |
| |
| if (!pskb_may_pull(skb, arp_hdr_len(bond->dev))) |
| goto out_unlock; |
| |
| arp = arp_hdr(skb); |
| if (arp->ar_hln != bond->dev->addr_len || |
| skb->pkt_type == PACKET_OTHERHOST || |
| skb->pkt_type == PACKET_LOOPBACK || |
| arp->ar_hrd != htons(ARPHRD_ETHER) || |
| arp->ar_pro != htons(ETH_P_IP) || |
| arp->ar_pln != 4) |
| goto out_unlock; |
| |
| arp_ptr = (unsigned char *)(arp + 1); |
| arp_ptr += bond->dev->addr_len; |
| memcpy(&sip, arp_ptr, 4); |
| arp_ptr += 4 + bond->dev->addr_len; |
| memcpy(&tip, arp_ptr, 4); |
| |
| pr_debug("bond_arp_rcv: %s %s/%d av %d sv %d sip %pI4 tip %pI4\n", |
| bond->dev->name, slave->dev->name, bond_slave_state(slave), |
| bond->params.arp_validate, slave_do_arp_validate(bond, slave), |
| &sip, &tip); |
| |
| /* |
| * Backup slaves won't see the ARP reply, but do come through |
| * here for each ARP probe (so we swap the sip/tip to validate |
| * the probe). In a "redundant switch, common router" type of |
| * configuration, the ARP probe will (hopefully) travel from |
| * the active, through one switch, the router, then the other |
| * switch before reaching the backup. |
| */ |
| if (bond_is_active_slave(slave)) |
| bond_validate_arp(bond, slave, sip, tip); |
| else |
| bond_validate_arp(bond, slave, tip, sip); |
| |
| out_unlock: |
| read_unlock(&bond->lock); |
| } |
| |
| /* |
| * this function is called regularly to monitor each slave's link |
| * ensuring that traffic is being sent and received when arp monitoring |
| * is used in load-balancing mode. if the adapter has been dormant, then an |
| * arp is transmitted to generate traffic. see activebackup_arp_monitor for |
| * arp monitoring in active backup mode. |
| */ |
| void bond_loadbalance_arp_mon(struct work_struct *work) |
| { |
| struct bonding *bond = container_of(work, struct bonding, |
| arp_work.work); |
| struct slave *slave, *oldcurrent; |
| int do_failover = 0; |
| int delta_in_ticks; |
| int i; |
| |
| read_lock(&bond->lock); |
| |
| delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval); |
| |
| if (bond->kill_timers) |
| goto out; |
| |
| if (bond->slave_cnt == 0) |
| goto re_arm; |
| |
| read_lock(&bond->curr_slave_lock); |
| oldcurrent = bond->curr_active_slave; |
| read_unlock(&bond->curr_slave_lock); |
| |
| /* see if any of the previous devices are up now (i.e. they have |
| * xmt and rcv traffic). the curr_active_slave does not come into |
| * the picture unless it is null. also, slave->jiffies is not needed |
| * here because we send an arp on each slave and give a slave as |
| * long as it needs to get the tx/rx within the delta. |
| * TODO: what about up/down delay in arp mode? it wasn't here before |
| * so it can wait |
| */ |
| bond_for_each_slave(bond, slave, i) { |
| unsigned long trans_start = dev_trans_start(slave->dev); |
| |
| if (slave->link != BOND_LINK_UP) { |
| if (time_in_range(jiffies, |
| trans_start - delta_in_ticks, |
| trans_start + delta_in_ticks) && |
| time_in_range(jiffies, |
| slave->dev->last_rx - delta_in_ticks, |
| slave->dev->last_rx + delta_in_ticks)) { |
| |
| slave->link = BOND_LINK_UP; |
| bond_set_active_slave(slave); |
| |
| /* primary_slave has no meaning in round-robin |
| * mode. the window of a slave being up and |
| * curr_active_slave being null after enslaving |
| * is closed. |
| */ |
| if (!oldcurrent) { |
| pr_info("%s: link status definitely up for interface %s, ", |
| bond->dev->name, |
| slave->dev->name); |
| do_failover = 1; |
| } else { |
| pr_info("%s: interface %s is now up\n", |
| bond->dev->name, |
| slave->dev->name); |
| } |
| } |
| } else { |
| /* slave->link == BOND_LINK_UP */ |
| |
| /* not all switches will respond to an arp request |
| * when the source ip is 0, so don't take the link down |
| * if we don't know our ip yet |
| */ |
| if (!time_in_range(jiffies, |
| trans_start - delta_in_ticks, |
| trans_start + 2 * delta_in_ticks) || |
| !time_in_range(jiffies, |
| slave->dev->last_rx - delta_in_ticks, |
| slave->dev->last_rx + 2 * delta_in_ticks)) { |
| |
| slave->link = BOND_LINK_DOWN; |
| bond_set_backup_slave(slave); |
| |
| if (slave->link_failure_count < UINT_MAX) |
| slave->link_failure_count++; |
| |
| pr_info("%s: interface %s is now down.\n", |
| bond->dev->name, |
| slave->dev->name); |
| |
| if (slave == oldcurrent) |
| do_failover = 1; |
| } |
| } |
| |
| /* note: if switch is in round-robin mode, all links |
| * must tx arp to ensure all links rx an arp - otherwise |
| * links may oscillate or not come up at all; if switch is |
| * in something like xor mode, there is nothing we can |
| * do - all replies will be rx'ed on same link causing slaves |
| * to be unstable during low/no traffic periods |
| */ |
| if (IS_UP(slave->dev)) |
| bond_arp_send_all(bond, slave); |
| } |
| |
| if (do_failover) { |
| block_netpoll_tx(); |
| write_lock_bh(&bond->curr_slave_lock); |
| |
| bond_select_active_slave(bond); |
| |
| write_unlock_bh(&bond->curr_slave_lock); |
| unblock_netpoll_tx(); |
| } |
| |
| re_arm: |
| if (bond->params.arp_interval) |
| queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks); |
| out: |
| read_unlock(&bond->lock); |
| } |
| |
| /* |
| * Called to inspect slaves for active-backup mode ARP monitor link state |
| * changes. Sets new_link in slaves to specify what action should take |
| * place for the slave. Returns 0 if no changes are found, >0 if changes |
| * to link states must be committed. |
| * |
| * Called with bond->lock held for read. |
| */ |
| static int bond_ab_arp_inspect(struct bonding *bond, int delta_in_ticks) |
| { |
| struct slave *slave; |
| int i, commit = 0; |
| unsigned long trans_start; |
| |
| bond_for_each_slave(bond, slave, i) { |
| slave->new_link = BOND_LINK_NOCHANGE; |
| |
| if (slave->link != BOND_LINK_UP) { |
| if (time_in_range(jiffies, |
| slave_last_rx(bond, slave) - delta_in_ticks, |
| slave_last_rx(bond, slave) + delta_in_ticks)) { |
| |
| slave->new_link = BOND_LINK_UP; |
| commit++; |
| } |
| |
| continue; |
| } |
| |
| /* |
| * Give slaves 2*delta after being enslaved or made |
| * active. This avoids bouncing, as the last receive |
| * times need a full ARP monitor cycle to be updated. |
| */ |
| if (time_in_range(jiffies, |
| slave->jiffies - delta_in_ticks, |
| slave->jiffies + 2 * delta_in_ticks)) |
| continue; |
| |
| /* |
| * Backup slave is down if: |
| * - No current_arp_slave AND |
| * - more than 3*delta since last receive AND |
| * - the bond has an IP address |
| * |
| * Note: a non-null current_arp_slave indicates |
| * the curr_active_slave went down and we are |
| * searching for a new one; under this condition |
| * we only take the curr_active_slave down - this |
| * gives each slave a chance to tx/rx traffic |
| * before being taken out |
| */ |
| if (!bond_is_active_slave(slave) && |
| !bond->current_arp_slave && |
| !time_in_range(jiffies, |
| slave_last_rx(bond, slave) - delta_in_ticks, |
| slave_last_rx(bond, slave) + 3 * delta_in_ticks)) { |
| |
| slave->new_link = BOND_LINK_DOWN; |
| commit++; |
| } |
| |
| /* |
| * Active slave is down if: |
| * - more than 2*delta since transmitting OR |
| * - (more than 2*delta since receive AND |
| * the bond has an IP address) |
| */ |
| trans_start = dev_trans_start(slave->dev); |
| if (bond_is_active_slave(slave) && |
| (!time_in_range(jiffies, |
| trans_start - delta_in_ticks, |
| trans_start + 2 * delta_in_ticks) || |
| !time_in_range(jiffies, |
| slave_last_rx(bond, slave) - delta_in_ticks, |
| slave_last_rx(bond, slave) + 2 * delta_in_ticks))) { |
| |
| slave->new_link = BOND_LINK_DOWN; |
| commit++; |
| } |
| } |
| |
| return commit; |
| } |
| |
| /* |
| * Called to commit link state changes noted by inspection step of |
| * active-backup mode ARP monitor. |
| * |
| * Called with RTNL and bond->lock for read. |
| */ |
| static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks) |
| { |
| struct slave *slave; |
| int i; |
| unsigned long trans_start; |
| |
| bond_for_each_slave(bond, slave, i) { |
| switch (slave->new_link) { |
| case BOND_LINK_NOCHANGE: |
| continue; |
| |
| case BOND_LINK_UP: |
| trans_start = dev_trans_start(slave->dev); |
| if ((!bond->curr_active_slave && |
| time_in_range(jiffies, |
| trans_start - delta_in_ticks, |
| trans_start + delta_in_ticks)) || |
| bond->curr_active_slave != slave) { |
| slave->link = BOND_LINK_UP; |
| bond->current_arp_slave = NULL; |
| |
| pr_info("%s: link status definitely up for interface %s.\n", |
| bond->dev->name, slave->dev->name); |
| |
| if (!bond->curr_active_slave || |
| (slave == bond->primary_slave)) |
| goto do_failover; |
| |
| } |
| |
| continue; |
| |
| case BOND_LINK_DOWN: |
| if (slave->link_failure_count < UINT_MAX) |
| slave->link_failure_count++; |
| |
| slave->link = BOND_LINK_DOWN; |
| bond_set_slave_inactive_flags(slave); |
| |
| pr_info("%s: link status definitely down for interface %s, disabling it\n", |
| bond->dev->name, slave->dev->name); |
| |
| if (slave == bond->curr_active_slave) { |
| bond->current_arp_slave = NULL; |
| goto do_failover; |
| } |
| |
| continue; |
| |
| default: |
| pr_err("%s: impossible: new_link %d on slave %s\n", |
| bond->dev->name, slave->new_link, |
| slave->dev->name); |
| continue; |
| } |
| |
| do_failover: |
| ASSERT_RTNL(); |
| block_netpoll_tx(); |
| write_lock_bh(&bond->curr_slave_lock); |
| bond_select_active_slave(bond); |
| write_unlock_bh(&bond->curr_slave_lock); |
| unblock_netpoll_tx(); |
| } |
| |
| bond_set_carrier(bond); |
| } |
| |
| /* |
| * Send ARP probes for active-backup mode ARP monitor. |
| * |
| * Called with bond->lock held for read. |
| */ |
| static void bond_ab_arp_probe(struct bonding *bond) |
| { |
| struct slave *slave; |
| int i; |
| |
| read_lock(&bond->curr_slave_lock); |
| |
| if (bond->current_arp_slave && bond->curr_active_slave) |
| pr_info("PROBE: c_arp %s && cas %s BAD\n", |
| bond->current_arp_slave->dev->name, |
| bond->curr_active_slave->dev->name); |
| |
| if (bond->curr_active_slave) { |
| bond_arp_send_all(bond, bond->curr_active_slave); |
| read_unlock(&bond->curr_slave_lock); |
| return; |
| } |
| |
| read_unlock(&bond->curr_slave_lock); |
| |
| /* if we don't have a curr_active_slave, search for the next available |
| * backup slave from the current_arp_slave and make it the candidate |
| * for becoming the curr_active_slave |
| */ |
| |
| if (!bond->current_arp_slave) { |
| bond->current_arp_slave = bond->first_slave; |
| if (!bond->current_arp_slave) |
| return; |
| } |
| |
| bond_set_slave_inactive_flags(bond->current_arp_slave); |
| |
| /* search for next candidate */ |
| bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) { |
| if (IS_UP(slave->dev)) { |
| slave->link = BOND_LINK_BACK; |
| bond_set_slave_active_flags(slave); |
| bond_arp_send_all(bond, slave); |
| slave->jiffies = jiffies; |
| bond->current_arp_slave = slave; |
| break; |
| } |
| |
| /* if the link state is up at this point, we |
| * mark it down - this can happen if we have |
| * simultaneous link failures and |
| * reselect_active_interface doesn't make this |
| * one the current slave so it is still marked |
| * up when it is actually down |
| */ |
| if (slave->link == BOND_LINK_UP) { |
| slave->link = BOND_LINK_DOWN; |
| if (slave->link_failure_count < UINT_MAX) |
| slave->link_failure_count++; |
| |
| bond_set_slave_inactive_flags(slave); |
| |
| pr_info("%s: backup interface %s is now down.\n", |
| bond->dev->name, slave->dev->name); |
| } |
| } |
| } |
| |
| void bond_activebackup_arp_mon(struct work_struct *work) |
| { |
| struct bonding *bond = container_of(work, struct bonding, |
| arp_work.work); |
| bool should_notify_peers = false; |
| int delta_in_ticks; |
| |
| read_lock(&bond->lock); |
| |
| if (bond->kill_timers) |
| goto out; |
| |
| delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval); |
| |
| if (bond->slave_cnt == 0) |
| goto re_arm; |
| |
| should_notify_peers = bond_should_notify_peers(bond); |
| |
| if (bond_ab_arp_inspect(bond, delta_in_ticks)) { |
| read_unlock(&bond->lock); |
| rtnl_lock(); |
| read_lock(&bond->lock); |
| |
| bond_ab_arp_commit(bond, delta_in_ticks); |
| |
| read_unlock(&bond->lock); |
| rtnl_unlock(); |
| read_lock(&bond->lock); |
| } |
| |
| bond_ab_arp_probe(bond); |
| |
| re_arm: |
| if (bond->params.arp_interval) |
| queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks); |
| out: |
| read_unlock(&bond->lock); |
| |
| if (should_notify_peers) { |
| rtnl_lock(); |
| netdev_bonding_change(bond->dev, NETDEV_NOTIFY_PEERS); |
| rtnl_unlock(); |
| } |
| } |
| |
| /*-------------------------- netdev event handling --------------------------*/ |
| |
| /* |
| * Change device name |
| */ |
| static int bond_event_changename(struct bonding *bond) |
| { |
| bond_remove_proc_entry(bond); |
| bond_create_proc_entry(bond); |
| |
| bond_debug_reregister(bond); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int bond_master_netdev_event(unsigned long event, |
| struct net_device *bond_dev) |
| { |
| struct bonding *event_bond = netdev_priv(bond_dev); |
| |
| switch (event) { |
| case NETDEV_CHANGENAME: |
| return bond_event_changename(event_bond); |
| default: |
| break; |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int bond_slave_netdev_event(unsigned long event, |
| struct net_device *slave_dev) |
| { |
| struct net_device *bond_dev = slave_dev->master; |
| struct bonding *bond = netdev_priv(bond_dev); |
| |
| switch (event) { |
| case NETDEV_UNREGISTER: |
| if (bond_dev) { |
| if (bond->setup_by_slave) |
| bond_release_and_destroy(bond_dev, slave_dev); |
| else |
| bond_release(bond_dev, slave_dev); |
| } |
| break; |
| case NETDEV_CHANGE: |
| if (bond->params.mode == BOND_MODE_8023AD || bond_is_lb(bond)) { |
| struct slave *slave; |
| |
| slave = bond_get_slave_by_dev(bond, slave_dev); |
| if (slave) { |
| u32 old_speed = slave->speed; |
| u8 old_duplex = slave->duplex; |
| |
| bond_update_speed_duplex(slave); |
| |
| if (bond_is_lb(bond)) |
| break; |
| |
| if (old_speed != slave->speed) |
| bond_3ad_adapter_speed_changed(slave); |
| if (old_duplex != slave->duplex) |
| bond_3ad_adapter_duplex_changed(slave); |
| } |
| } |
| |
| break; |
| case NETDEV_DOWN: |
| /* |
| * ... Or is it this? |
| */ |
| break; |
| case NETDEV_CHANGEMTU: |
| /* |
| * TODO: Should slaves be allowed to |
| * independently alter their MTU? For |
| * an active-backup bond, slaves need |
| * not be the same type of device, so |
| * MTUs may vary. For other modes, |
| * slaves arguably should have the |
| * same MTUs. To do this, we'd need to |
| * take over the slave's change_mtu |
| * function for the duration of their |
| * servitude. |
| */ |
| break; |
| case NETDEV_CHANGENAME: |
| /* |
| * TODO: handle changing the primary's name |
| */ |
| break; |
| case NETDEV_FEAT_CHANGE: |
| bond_compute_features(bond); |
| break; |
| default: |
| break; |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * bond_netdev_event: handle netdev notifier chain events. |
| * |
| * This function receives events for the netdev chain. The caller (an |
| * ioctl handler calling blocking_notifier_call_chain) holds the necessary |
| * locks for us to safely manipulate the slave devices (RTNL lock, |
| * dev_probe_lock). |
| */ |
| static int bond_netdev_event(struct notifier_block *this, |
| unsigned long event, void *ptr) |
| { |
| struct net_device *event_dev = (struct net_device *)ptr; |
| |
| pr_debug("event_dev: %s, event: %lx\n", |
| event_dev ? event_dev->name : "None", |
| event); |
| |
| if (!(event_dev->priv_flags & IFF_BONDING)) |
| return NOTIFY_DONE; |
| |
| if (event_dev->flags & IFF_MASTER) { |
| pr_debug("IFF_MASTER\n"); |
| return bond_master_netdev_event(event, event_dev); |
| } |
| |
| if (event_dev->flags & IFF_SLAVE) { |
| pr_debug("IFF_SLAVE\n"); |
| return bond_slave_netdev_event(event, event_dev); |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * bond_inetaddr_event: handle inetaddr notifier chain events. |
| * |
| * We keep track of device IPs primarily to use as source addresses in |
| * ARP monitor probes (rather than spewing out broadcasts all the time). |
| * |
| * We track one IP for the main device (if it has one), plus one per VLAN. |
| */ |
| static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr) |
| { |
| struct in_ifaddr *ifa = ptr; |
| struct net_device *vlan_dev, *event_dev = ifa->ifa_dev->dev; |
| struct bond_net *bn = net_generic(dev_net(event_dev), bond_net_id); |
| struct bonding *bond; |
| struct vlan_entry *vlan; |
| |
| list_for_each_entry(bond, &bn->dev_list, bond_list) { |
| if (bond->dev == event_dev) { |
| switch (event) { |
| case NETDEV_UP: |
| bond->master_ip = ifa->ifa_local; |
| return NOTIFY_OK; |
| case NETDEV_DOWN: |
| bond->master_ip = bond_glean_dev_ip(bond->dev); |
| return NOTIFY_OK; |
| default: |
| return NOTIFY_DONE; |
| } |
| } |
| |
| list_for_each_entry(vlan, &bond->vlan_list, vlan_list) { |
| if (!bond->vlgrp) |
| continue; |
| vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id); |
| if (vlan_dev == event_dev) { |
| switch (event) { |
| case NETDEV_UP: |
| vlan->vlan_ip = ifa->ifa_local; |
| return NOTIFY_OK; |
| case NETDEV_DOWN: |
| vlan->vlan_ip = |
| bond_glean_dev_ip(vlan_dev); |
| return NOTIFY_OK; |
| default: |
| return NOTIFY_DONE; |
| } |
| } |
| } |
| } |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block bond_netdev_notifier = { |
| .notifier_call = bond_netdev_event, |
| }; |
| |
| static struct notifier_block bond_inetaddr_notifier = { |
| .notifier_call = bond_inetaddr_event, |
| }; |
| |
| /*---------------------------- Hashing Policies -----------------------------*/ |
| |
| /* |
| * Hash for the output device based upon layer 2 and layer 3 data. If |
| * the packet is not IP mimic bond_xmit_hash_policy_l2() |
| */ |
| static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count) |
| { |
| struct ethhdr *data = (struct ethhdr *)skb->data; |
| struct iphdr *iph = ip_hdr(skb); |
| |
| if (skb->protocol == htons(ETH_P_IP)) { |
| return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^ |
| (data->h_dest[5] ^ data->h_source[5])) % count; |
| } |
| |
| return (data->h_dest[5] ^ data->h_source[5]) % count; |
| } |
| |
| /* |
| * Hash for the output device based upon layer 3 and layer 4 data. If |
| * the packet is a frag or not TCP or UDP, just use layer 3 data. If it is |
| * altogether not IP, mimic bond_xmit_hash_policy_l2() |
| */ |
| static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count) |
| { |
| struct ethhdr *data = (struct ethhdr *)skb->data; |
| struct iphdr *iph = ip_hdr(skb); |
| __be16 *layer4hdr = (__be16 *)((u32 *)iph + iph->ihl); |
| int layer4_xor = 0; |
| |
| if (skb->protocol == htons(ETH_P_IP)) { |
| if (!(iph->frag_off & htons(IP_MF|IP_OFFSET)) && |
| (iph->protocol == IPPROTO_TCP || |
| iph->protocol == IPPROTO_UDP)) { |
| layer4_xor = ntohs((*layer4hdr ^ *(layer4hdr + 1))); |
| } |
| return (layer4_xor ^ |
| ((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count; |
| |
| } |
| |
| return (data->h_dest[5] ^ data->h_source[5]) % count; |
| } |
| |
| /* |
| * Hash for the output device based upon layer 2 data |
| */ |
| static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count) |
| { |
| struct ethhdr *data = (struct ethhdr *)skb->data; |
| |
| return (data->h_dest[5] ^ data->h_source[5]) % count; |
| } |
| |
| /*-------------------------- Device entry points ----------------------------*/ |
| |
| static int bond_open(struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| |
| bond->kill_timers = 0; |
| |
| INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed); |
| |
| if (bond_is_lb(bond)) { |
| /* bond_alb_initialize must be called before the timer |
| * is started. |
| */ |
| if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) { |
| /* something went wrong - fail the open operation */ |
| return -ENOMEM; |
| } |
| |
| INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); |
| queue_delayed_work(bond->wq, &bond->alb_work, 0); |
| } |
| |
| if (bond->params.miimon) { /* link check interval, in milliseconds. */ |
| INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor); |
| queue_delayed_work(bond->wq, &bond->mii_work, 0); |
| } |
| |
| if (bond->params.arp_interval) { /* arp interval, in milliseconds. */ |
| if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) |
| INIT_DELAYED_WORK(&bond->arp_work, |
| bond_activebackup_arp_mon); |
| else |
| INIT_DELAYED_WORK(&bond->arp_work, |
| bond_loadbalance_arp_mon); |
| |
| queue_delayed_work(bond->wq, &bond->arp_work, 0); |
| if (bond->params.arp_validate) |
| bond->recv_probe = bond_arp_rcv; |
| } |
| |
| if (bond->params.mode == BOND_MODE_8023AD) { |
| INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler); |
| queue_delayed_work(bond->wq, &bond->ad_work, 0); |
| /* register to receive LACPDUs */ |
| bond->recv_probe = bond_3ad_lacpdu_recv; |
| bond_3ad_initiate_agg_selection(bond, 1); |
| } |
| |
| return 0; |
| } |
| |
| static int bond_close(struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| |
| write_lock_bh(&bond->lock); |
| |
| bond->send_peer_notif = 0; |
| |
| /* signal timers not to re-arm */ |
| bond->kill_timers = 1; |
| |
| write_unlock_bh(&bond->lock); |
| |
| if (bond->params.miimon) { /* link check interval, in milliseconds. */ |
| cancel_delayed_work(&bond->mii_work); |
| } |
| |
| if (bond->params.arp_interval) { /* arp interval, in milliseconds. */ |
| cancel_delayed_work(&bond->arp_work); |
| } |
| |
| switch (bond->params.mode) { |
| case BOND_MODE_8023AD: |
| cancel_delayed_work(&bond->ad_work); |
| break; |
| case BOND_MODE_TLB: |
| case BOND_MODE_ALB: |
| cancel_delayed_work(&bond->alb_work); |
| break; |
| default: |
| break; |
| } |
| |
| if (delayed_work_pending(&bond->mcast_work)) |
| cancel_delayed_work(&bond->mcast_work); |
| |
| if (bond_is_lb(bond)) { |
| /* Must be called only after all |
| * slaves have been released |
| */ |
| bond_alb_deinitialize(bond); |
| } |
| bond->recv_probe = NULL; |
| |
| return 0; |
| } |
| |
| static struct rtnl_link_stats64 *bond_get_stats(struct net_device *bond_dev, |
| struct rtnl_link_stats64 *stats) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct rtnl_link_stats64 temp; |
| struct slave *slave; |
| int i; |
| |
| memset(stats, 0, sizeof(*stats)); |
| |
| read_lock_bh(&bond->lock); |
| |
| bond_for_each_slave(bond, slave, i) { |
| const struct rtnl_link_stats64 *sstats = |
| dev_get_stats(slave->dev, &temp); |
| |
| stats->rx_packets += sstats->rx_packets; |
| stats->rx_bytes += sstats->rx_bytes; |
| stats->rx_errors += sstats->rx_errors; |
| stats->rx_dropped += sstats->rx_dropped; |
| |
| stats->tx_packets += sstats->tx_packets; |
| stats->tx_bytes += sstats->tx_bytes; |
| stats->tx_errors += sstats->tx_errors; |
| stats->tx_dropped += sstats->tx_dropped; |
| |
| stats->multicast += sstats->multicast; |
| stats->collisions += sstats->collisions; |
| |
| stats->rx_length_errors += sstats->rx_length_errors; |
| stats->rx_over_errors += sstats->rx_over_errors; |
| stats->rx_crc_errors += sstats->rx_crc_errors; |
| stats->rx_frame_errors += sstats->rx_frame_errors; |
| stats->rx_fifo_errors += sstats->rx_fifo_errors; |
| stats->rx_missed_errors += sstats->rx_missed_errors; |
| |
| stats->tx_aborted_errors += sstats->tx_aborted_errors; |
| stats->tx_carrier_errors += sstats->tx_carrier_errors; |
| stats->tx_fifo_errors += sstats->tx_fifo_errors; |
| stats->tx_heartbeat_errors += sstats->tx_heartbeat_errors; |
| stats->tx_window_errors += sstats->tx_window_errors; |
| } |
| |
| read_unlock_bh(&bond->lock); |
| |
| return stats; |
| } |
| |
| static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd) |
| { |
| struct net_device *slave_dev = NULL; |
| struct ifbond k_binfo; |
| struct ifbond __user *u_binfo = NULL; |
| struct ifslave k_sinfo; |
| struct ifslave __user *u_sinfo = NULL; |
| struct mii_ioctl_data *mii = NULL; |
| int res = 0; |
| |
| pr_debug("bond_ioctl: master=%s, cmd=%d\n", bond_dev->name, cmd); |
| |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| mii = if_mii(ifr); |
| if (!mii) |
| return -EINVAL; |
| |
| mii->phy_id = 0; |
| /* Fall Through */ |
| case SIOCGMIIREG: |
| /* |
| * We do this again just in case we were called by SIOCGMIIREG |
| * instead of SIOCGMIIPHY. |
| */ |
| mii = if_mii(ifr); |
| if (!mii) |
| return -EINVAL; |
| |
| |
| if (mii->reg_num == 1) { |
| struct bonding *bond = netdev_priv(bond_dev); |
| mii->val_out = 0; |
| read_lock(&bond->lock); |
| read_lock(&bond->curr_slave_lock); |
| if (netif_carrier_ok(bond->dev)) |
| mii->val_out = BMSR_LSTATUS; |
| |
| read_unlock(&bond->curr_slave_lock); |
| read_unlock(&bond->lock); |
| } |
| |
| return 0; |
| case BOND_INFO_QUERY_OLD: |
| case SIOCBONDINFOQUERY: |
| u_binfo = (struct ifbond __user *)ifr->ifr_data; |
| |
| if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond))) |
| return -EFAULT; |
| |
| res = bond_info_query(bond_dev, &k_binfo); |
| if (res == 0 && |
| copy_to_user(u_binfo, &k_binfo, sizeof(ifbond))) |
| return -EFAULT; |
| |
| return res; |
| case BOND_SLAVE_INFO_QUERY_OLD: |
| case SIOCBONDSLAVEINFOQUERY: |
| u_sinfo = (struct ifslave __user *)ifr->ifr_data; |
| |
| if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave))) |
| return -EFAULT; |
| |
| res = bond_slave_info_query(bond_dev, &k_sinfo); |
| if (res == 0 && |
| copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave))) |
| return -EFAULT; |
| |
| return res; |
| default: |
| /* Go on */ |
| break; |
| } |
| |
| if (!capable(CAP_NET_ADMIN)) |
| return -EPERM; |
| |
| slave_dev = dev_get_by_name(dev_net(bond_dev), ifr->ifr_slave); |
| |
| pr_debug("slave_dev=%p:\n", slave_dev); |
| |
| if (!slave_dev) |
| res = -ENODEV; |
| else { |
| pr_debug("slave_dev->name=%s:\n", slave_dev->name); |
| switch (cmd) { |
| case BOND_ENSLAVE_OLD: |
| case SIOCBONDENSLAVE: |
| res = bond_enslave(bond_dev, slave_dev); |
| break; |
| case BOND_RELEASE_OLD: |
| case SIOCBONDRELEASE: |
| res = bond_release(bond_dev, slave_dev); |
| break; |
| case BOND_SETHWADDR_OLD: |
| case SIOCBONDSETHWADDR: |
| res = bond_sethwaddr(bond_dev, slave_dev); |
| break; |
| case BOND_CHANGE_ACTIVE_OLD: |
| case SIOCBONDCHANGEACTIVE: |
| res = bond_ioctl_change_active(bond_dev, slave_dev); |
| break; |
| default: |
| res = -EOPNOTSUPP; |
| } |
| |
| dev_put(slave_dev); |
| } |
| |
| return res; |
| } |
| |
| static bool bond_addr_in_mc_list(unsigned char *addr, |
| struct netdev_hw_addr_list *list, |
| int addrlen) |
| { |
| struct netdev_hw_addr *ha; |
| |
| netdev_hw_addr_list_for_each(ha, list) |
| if (!memcmp(ha->addr, addr, addrlen)) |
| return true; |
| |
| return false; |
| } |
| |
| static void bond_set_multicast_list(struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct netdev_hw_addr *ha; |
| bool found; |
| |
| /* |
| * Do promisc before checking multicast_mode |
| */ |
| if ((bond_dev->flags & IFF_PROMISC) && !(bond->flags & IFF_PROMISC)) |
| /* |
| * FIXME: Need to handle the error when one of the multi-slaves |
| * encounters error. |
| */ |
| bond_set_promiscuity(bond, 1); |
| |
| |
| if (!(bond_dev->flags & IFF_PROMISC) && (bond->flags & IFF_PROMISC)) |
| bond_set_promiscuity(bond, -1); |
| |
| |
| /* set allmulti flag to slaves */ |
| if ((bond_dev->flags & IFF_ALLMULTI) && !(bond->flags & IFF_ALLMULTI)) |
| /* |
| * FIXME: Need to handle the error when one of the multi-slaves |
| * encounters error. |
| */ |
| bond_set_allmulti(bond, 1); |
| |
| |
| if (!(bond_dev->flags & IFF_ALLMULTI) && (bond->flags & IFF_ALLMULTI)) |
| bond_set_allmulti(bond, -1); |
| |
| |
| read_lock(&bond->lock); |
| |
| bond->flags = bond_dev->flags; |
| |
| /* looking for addresses to add to slaves' mc list */ |
| netdev_for_each_mc_addr(ha, bond_dev) { |
| found = bond_addr_in_mc_list(ha->addr, &bond->mc_list, |
| bond_dev->addr_len); |
| if (!found) |
| bond_mc_add(bond, ha->addr); |
| } |
| |
| /* looking for addresses to delete from slaves' list */ |
| netdev_hw_addr_list_for_each(ha, &bond->mc_list) { |
| found = bond_addr_in_mc_list(ha->addr, &bond_dev->mc, |
| bond_dev->addr_len); |
| if (!found) |
| bond_mc_del(bond, ha->addr); |
| } |
| |
| /* save master's multicast list */ |
| __hw_addr_flush(&bond->mc_list); |
| __hw_addr_add_multiple(&bond->mc_list, &bond_dev->mc, |
| bond_dev->addr_len, NETDEV_HW_ADDR_T_MULTICAST); |
| |
| read_unlock(&bond->lock); |
| } |
| |
| static int bond_neigh_setup(struct net_device *dev, struct neigh_parms *parms) |
| { |
| struct bonding *bond = netdev_priv(dev); |
| struct slave *slave = bond->first_slave; |
| |
| if (slave) { |
| const struct net_device_ops *slave_ops |
| = slave->dev->netdev_ops; |
| if (slave_ops->ndo_neigh_setup) |
| return slave_ops->ndo_neigh_setup(slave->dev, parms); |
| } |
| return 0; |
| } |
| |
| /* |
| * Change the MTU of all of a master's slaves to match the master |
| */ |
| static int bond_change_mtu(struct net_device *bond_dev, int new_mtu) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *slave, *stop_at; |
| int res = 0; |
| int i; |
| |
| pr_debug("bond=%p, name=%s, new_mtu=%d\n", bond, |
| (bond_dev ? bond_dev->name : "None"), new_mtu); |
| |
| /* Can't hold bond->lock with bh disabled here since |
| * some base drivers panic. On the other hand we can't |
| * hold bond->lock without bh disabled because we'll |
| * deadlock. The only solution is to rely on the fact |
| * that we're under rtnl_lock here, and the slaves |
| * list won't change. This doesn't solve the problem |
| * of setting the slave's MTU while it is |
| * transmitting, but the assumption is that the base |
| * driver can handle that. |
| * |
| * TODO: figure out a way to safely iterate the slaves |
| * list, but without holding a lock around the actual |
| * call to the base driver. |
| */ |
| |
| bond_for_each_slave(bond, slave, i) { |
| pr_debug("s %p s->p %p c_m %p\n", |
| slave, |
| slave->prev, |
| slave->dev->netdev_ops->ndo_change_mtu); |
| |
| res = dev_set_mtu(slave->dev, new_mtu); |
| |
| if (res) { |
| /* If we failed to set the slave's mtu to the new value |
| * we must abort the operation even in ACTIVE_BACKUP |
| * mode, because if we allow the backup slaves to have |
| * different mtu values than the active slave we'll |
| * need to change their mtu when doing a failover. That |
| * means changing their mtu from timer context, which |
| * is probably not a good idea. |
| */ |
| pr_debug("err %d %s\n", res, slave->dev->name); |
| goto unwind; |
| } |
| } |
| |
| bond_dev->mtu = new_mtu; |
| |
| return 0; |
| |
| unwind: |
| /* unwind from head to the slave that failed */ |
| stop_at = slave; |
| bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) { |
| int tmp_res; |
| |
| tmp_res = dev_set_mtu(slave->dev, bond_dev->mtu); |
| if (tmp_res) { |
| pr_debug("unwind err %d dev %s\n", |
| tmp_res, slave->dev->name); |
| } |
| } |
| |
| return res; |
| } |
| |
| /* |
| * Change HW address |
| * |
| * Note that many devices must be down to change the HW address, and |
| * downing the master releases all slaves. We can make bonds full of |
| * bonding devices to test this, however. |
| */ |
| static int bond_set_mac_address(struct net_device *bond_dev, void *addr) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct sockaddr *sa = addr, tmp_sa; |
| struct slave *slave, *stop_at; |
| int res = 0; |
| int i; |
| |
| if (bond->params.mode == BOND_MODE_ALB) |
| return bond_alb_set_mac_address(bond_dev, addr); |
| |
| |
| pr_debug("bond=%p, name=%s\n", |
| bond, bond_dev ? bond_dev->name : "None"); |
| |
| /* |
| * If fail_over_mac is set to active, do nothing and return |
| * success. Returning an error causes ifenslave to fail. |
| */ |
| if (bond->params.fail_over_mac == BOND_FOM_ACTIVE) |
| return 0; |
| |
| if (!is_valid_ether_addr(sa->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| /* Can't hold bond->lock with bh disabled here since |
| * some base drivers panic. On the other hand we can't |
| * hold bond->lock without bh disabled because we'll |
| * deadlock. The only solution is to rely on the fact |
| * that we're under rtnl_lock here, and the slaves |
| * list won't change. This doesn't solve the problem |
| * of setting the slave's hw address while it is |
| * transmitting, but the assumption is that the base |
| * driver can handle that. |
| * |
| * TODO: figure out a way to safely iterate the slaves |
| * list, but without holding a lock around the actual |
| * call to the base driver. |
| */ |
| |
| bond_for_each_slave(bond, slave, i) { |
| const struct net_device_ops *slave_ops = slave->dev->netdev_ops; |
| pr_debug("slave %p %s\n", slave, slave->dev->name); |
| |
| if (slave_ops->ndo_set_mac_address == NULL) { |
| res = -EOPNOTSUPP; |
| pr_debug("EOPNOTSUPP %s\n", slave->dev->name); |
| goto unwind; |
| } |
| |
| res = dev_set_mac_address(slave->dev, addr); |
| if (res) { |
| /* TODO: consider downing the slave |
| * and retry ? |
| * User should expect communications |
| * breakage anyway until ARP finish |
| * updating, so... |
| */ |
| pr_debug("err %d %s\n", res, slave->dev->name); |
| goto unwind; |
| } |
| } |
| |
| /* success */ |
| memcpy(bond_dev->dev_addr, sa->sa_data, bond_dev->addr_len); |
| return 0; |
| |
| unwind: |
| memcpy(tmp_sa.sa_data, bond_dev->dev_addr, bond_dev->addr_len); |
| tmp_sa.sa_family = bond_dev->type; |
| |
| /* unwind from head to the slave that failed */ |
| stop_at = slave; |
| bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) { |
| int tmp_res; |
| |
| tmp_res = dev_set_mac_address(slave->dev, &tmp_sa); |
| if (tmp_res) { |
| pr_debug("unwind err %d dev %s\n", |
| tmp_res, slave->dev->name); |
| } |
| } |
| |
| return res; |
| } |
| |
| static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *slave, *start_at; |
| int i, slave_no, res = 1; |
| struct iphdr *iph = ip_hdr(skb); |
| |
| /* |
| * Start with the curr_active_slave that joined the bond as the |
| * default for sending IGMP traffic. For failover purposes one |
| * needs to maintain some consistency for the interface that will |
| * send the join/membership reports. The curr_active_slave found |
| * will send all of this type of traffic. |
| */ |
| if ((iph->protocol == IPPROTO_IGMP) && |
| (skb->protocol == htons(ETH_P_IP))) { |
| |
| read_lock(&bond->curr_slave_lock); |
| slave = bond->curr_active_slave; |
| read_unlock(&bond->curr_slave_lock); |
| |
| if (!slave) |
| goto out; |
| } else { |
| /* |
| * Concurrent TX may collide on rr_tx_counter; we accept |
| * that as being rare enough not to justify using an |
| * atomic op here. |
| */ |
| slave_no = bond->rr_tx_counter++ % bond->slave_cnt; |
| |
| bond_for_each_slave(bond, slave, i) { |
| slave_no--; |
| if (slave_no < 0) |
| break; |
| } |
| } |
| |
| start_at = slave; |
| bond_for_each_slave_from(bond, slave, i, start_at) { |
| if (IS_UP(slave->dev) && |
| (slave->link == BOND_LINK_UP) && |
| bond_is_active_slave(slave)) { |
| res = bond_dev_queue_xmit(bond, skb, slave->dev); |
| break; |
| } |
| } |
| |
| out: |
| if (res) { |
| /* no suitable interface, frame not sent */ |
| dev_kfree_skb(skb); |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| |
| /* |
| * in active-backup mode, we know that bond->curr_active_slave is always valid if |
| * the bond has a usable interface. |
| */ |
| static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| int res = 1; |
| |
| read_lock(&bond->curr_slave_lock); |
| |
| if (bond->curr_active_slave) |
| res = bond_dev_queue_xmit(bond, skb, |
| bond->curr_active_slave->dev); |
| |
| if (res) |
| /* no suitable interface, frame not sent */ |
| dev_kfree_skb(skb); |
| |
| read_unlock(&bond->curr_slave_lock); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* |
| * In bond_xmit_xor() , we determine the output device by using a pre- |
| * determined xmit_hash_policy(), If the selected device is not enabled, |
| * find the next active slave. |
| */ |
| static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *slave, *start_at; |
| int slave_no; |
| int i; |
| int res = 1; |
| |
| slave_no = bond->xmit_hash_policy(skb, bond->slave_cnt); |
| |
| bond_for_each_slave(bond, slave, i) { |
| slave_no--; |
| if (slave_no < 0) |
| break; |
| } |
| |
| start_at = slave; |
| |
| bond_for_each_slave_from(bond, slave, i, start_at) { |
| if (IS_UP(slave->dev) && |
| (slave->link == BOND_LINK_UP) && |
| bond_is_active_slave(slave)) { |
| res = bond_dev_queue_xmit(bond, skb, slave->dev); |
| break; |
| } |
| } |
| |
| if (res) { |
| /* no suitable interface, frame not sent */ |
| dev_kfree_skb(skb); |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* |
| * in broadcast mode, we send everything to all usable interfaces. |
| */ |
| static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct slave *slave, *start_at; |
| struct net_device *tx_dev = NULL; |
| int i; |
| int res = 1; |
| |
| read_lock(&bond->curr_slave_lock); |
| start_at = bond->curr_active_slave; |
| read_unlock(&bond->curr_slave_lock); |
| |
| if (!start_at) |
| goto out; |
| |
| bond_for_each_slave_from(bond, slave, i, start_at) { |
| if (IS_UP(slave->dev) && |
| (slave->link == BOND_LINK_UP) && |
| bond_is_active_slave(slave)) { |
| if (tx_dev) { |
| struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC); |
| if (!skb2) { |
| pr_err("%s: Error: bond_xmit_broadcast(): skb_clone() failed\n", |
| bond_dev->name); |
| continue; |
| } |
| |
| res = bond_dev_queue_xmit(bond, skb2, tx_dev); |
| if (res) { |
| dev_kfree_skb(skb2); |
| continue; |
| } |
| } |
| tx_dev = slave->dev; |
| } |
| } |
| |
| if (tx_dev) |
| res = bond_dev_queue_xmit(bond, skb, tx_dev); |
| |
| out: |
| if (res) |
| /* no suitable interface, frame not sent */ |
| dev_kfree_skb(skb); |
| |
| /* frame sent to all suitable interfaces */ |
| return NETDEV_TX_OK; |
| } |
| |
| /*------------------------- Device initialization ---------------------------*/ |
| |
| static void bond_set_xmit_hash_policy(struct bonding *bond) |
| { |
| switch (bond->params.xmit_policy) { |
| case BOND_XMIT_POLICY_LAYER23: |
| bond->xmit_hash_policy = bond_xmit_hash_policy_l23; |
| break; |
| case BOND_XMIT_POLICY_LAYER34: |
| bond->xmit_hash_policy = bond_xmit_hash_policy_l34; |
| break; |
| case BOND_XMIT_POLICY_LAYER2: |
| default: |
| bond->xmit_hash_policy = bond_xmit_hash_policy_l2; |
| break; |
| } |
| } |
| |
| /* |
| * Lookup the slave that corresponds to a qid |
| */ |
| static inline int bond_slave_override(struct bonding *bond, |
| struct sk_buff *skb) |
| { |
| int i, res = 1; |
| struct slave *slave = NULL; |
| struct slave *check_slave; |
| |
| if (!skb->queue_mapping) |
| return 1; |
| |
| /* Find out if any slaves have the same mapping as this skb. */ |
| bond_for_each_slave(bond, check_slave, i) { |
| if (check_slave->queue_id == skb->queue_mapping) { |
| slave = check_slave; |
| break; |
| } |
| } |
| |
| /* If the slave isn't UP, use default transmit policy. */ |
| if (slave && slave->queue_id && IS_UP(slave->dev) && |
| (slave->link == BOND_LINK_UP)) { |
| res = bond_dev_queue_xmit(bond, skb, slave->dev); |
| } |
| |
| return res; |
| } |
| |
| static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb) |
| { |
| /* |
| * This helper function exists to help dev_pick_tx get the correct |
| * destination queue. Using a helper function skips a call to |
| * skb_tx_hash and will put the skbs in the queue we expect on their |
| * way down to the bonding driver. |
| */ |
| u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0; |
| |
| if (unlikely(txq >= dev->real_num_tx_queues)) { |
| do { |
| txq -= dev->real_num_tx_queues; |
| } while (txq >= dev->real_num_tx_queues); |
| } |
| return txq; |
| } |
| |
| static netdev_tx_t __bond_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct bonding *bond = netdev_priv(dev); |
| |
| if (TX_QUEUE_OVERRIDE(bond->params.mode)) { |
| if (!bond_slave_override(bond, skb)) |
| return NETDEV_TX_OK; |
| } |
| |
| switch (bond->params.mode) { |
| case BOND_MODE_ROUNDROBIN: |
| return bond_xmit_roundrobin(skb, dev); |
| case BOND_MODE_ACTIVEBACKUP: |
| return bond_xmit_activebackup(skb, dev); |
| case BOND_MODE_XOR: |
| return bond_xmit_xor(skb, dev); |
| case BOND_MODE_BROADCAST: |
| return bond_xmit_broadcast(skb, dev); |
| case BOND_MODE_8023AD: |
| return bond_3ad_xmit_xor(skb, dev); |
| case BOND_MODE_ALB: |
| case BOND_MODE_TLB: |
| return bond_alb_xmit(skb, dev); |
| default: |
| /* Should never happen, mode already checked */ |
| pr_err("%s: Error: Unknown bonding mode %d\n", |
| dev->name, bond->params.mode); |
| WARN_ON_ONCE(1); |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| } |
| |
| static netdev_tx_t bond_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct bonding *bond = netdev_priv(dev); |
| netdev_tx_t ret = NETDEV_TX_OK; |
| |
| /* |
| * If we risk deadlock from transmitting this in the |
| * netpoll path, tell netpoll to queue the frame for later tx |
| */ |
| if (is_netpoll_tx_blocked(dev)) |
| return NETDEV_TX_BUSY; |
| |
| read_lock(&bond->lock); |
| |
| if (bond->slave_cnt) |
| ret = __bond_start_xmit(skb, dev); |
| else |
| dev_kfree_skb(skb); |
| |
| read_unlock(&bond->lock); |
| |
| return ret; |
| } |
| |
| /* |
| * set bond mode specific net device operations |
| */ |
| void bond_set_mode_ops(struct bonding *bond, int mode) |
| { |
| struct net_device *bond_dev = bond->dev; |
| |
| switch (mode) { |
| case BOND_MODE_ROUNDROBIN: |
| break; |
| case BOND_MODE_ACTIVEBACKUP: |
| break; |
| case BOND_MODE_XOR: |
| bond_set_xmit_hash_policy(bond); |
| break; |
| case BOND_MODE_BROADCAST: |
| break; |
| case BOND_MODE_8023AD: |
| bond_set_xmit_hash_policy(bond); |
| break; |
| case BOND_MODE_ALB: |
| /* FALLTHRU */ |
| case BOND_MODE_TLB: |
| break; |
| default: |
| /* Should never happen, mode already checked */ |
| pr_err("%s: Error: Unknown bonding mode %d\n", |
| bond_dev->name, mode); |
| break; |
| } |
| } |
| |
| static void bond_ethtool_get_drvinfo(struct net_device *bond_dev, |
| struct ethtool_drvinfo *drvinfo) |
| { |
| strncpy(drvinfo->driver, DRV_NAME, 32); |
| strncpy(drvinfo->version, DRV_VERSION, 32); |
| snprintf(drvinfo->fw_version, 32, "%d", BOND_ABI_VERSION); |
| } |
| |
| static const struct ethtool_ops bond_ethtool_ops = { |
| .get_drvinfo = bond_ethtool_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| }; |
| |
| static const struct net_device_ops bond_netdev_ops = { |
| .ndo_init = bond_init, |
| .ndo_uninit = bond_uninit, |
| .ndo_open = bond_open, |
| .ndo_stop = bond_close, |
| .ndo_start_xmit = bond_start_xmit, |
| .ndo_select_queue = bond_select_queue, |
| .ndo_get_stats64 = bond_get_stats, |
| .ndo_do_ioctl = bond_do_ioctl, |
| .ndo_set_multicast_list = bond_set_multicast_list, |
| .ndo_change_mtu = bond_change_mtu, |
| .ndo_set_mac_address = bond_set_mac_address, |
| .ndo_neigh_setup = bond_neigh_setup, |
| .ndo_vlan_rx_register = bond_vlan_rx_register, |
| .ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid, |
| .ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_netpoll_setup = bond_netpoll_setup, |
| .ndo_netpoll_cleanup = bond_netpoll_cleanup, |
| .ndo_poll_controller = bond_poll_controller, |
| #endif |
| .ndo_add_slave = bond_enslave, |
| .ndo_del_slave = bond_release, |
| .ndo_fix_features = bond_fix_features, |
| }; |
| |
| static void bond_destructor(struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| if (bond->wq) |
| destroy_workqueue(bond->wq); |
| free_netdev(bond_dev); |
| } |
| |
| static void bond_setup(struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| |
| /* initialize rwlocks */ |
| rwlock_init(&bond->lock); |
| rwlock_init(&bond->curr_slave_lock); |
| |
| bond->params = bonding_defaults; |
| |
| /* Initialize pointers */ |
| bond->dev = bond_dev; |
| INIT_LIST_HEAD(&bond->vlan_list); |
| |
| /* Initialize the device entry points */ |
| ether_setup(bond_dev); |
| bond_dev->netdev_ops = &bond_netdev_ops; |
| bond_dev->ethtool_ops = &bond_ethtool_ops; |
| bond_set_mode_ops(bond, bond->params.mode); |
| |
| bond_dev->destructor = bond_destructor; |
| |
| /* Initialize the device options */ |
| bond_dev->tx_queue_len = 0; |
| bond_dev->flags |= IFF_MASTER|IFF_MULTICAST; |
| bond_dev->priv_flags |= IFF_BONDING; |
| bond_dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; |
| |
| /* At first, we block adding VLANs. That's the only way to |
| * prevent problems that occur when adding VLANs over an |
| * empty bond. The block will be removed once non-challenged |
| * slaves are enslaved. |
| */ |
| bond_dev->features |= NETIF_F_VLAN_CHALLENGED; |
| |
| /* don't acquire bond device's netif_tx_lock when |
| * transmitting */ |
| bond_dev->features |= NETIF_F_LLTX; |
| |
| /* By default, we declare the bond to be fully |
| * VLAN hardware accelerated capable. Special |
| * care is taken in the various xmit functions |
| * when there are slaves that are not hw accel |
| * capable |
| */ |
| |
| bond_dev->hw_features = BOND_VLAN_FEATURES | |
| NETIF_F_HW_VLAN_TX | |
| NETIF_F_HW_VLAN_RX | |
| NETIF_F_HW_VLAN_FILTER; |
| |
| bond_dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_NO_CSUM); |
| bond_dev->features |= bond_dev->hw_features; |
| } |
| |
| static void bond_work_cancel_all(struct bonding *bond) |
| { |
| write_lock_bh(&bond->lock); |
| bond->kill_timers = 1; |
| write_unlock_bh(&bond->lock); |
| |
| if (bond->params.miimon && delayed_work_pending(&bond->mii_work)) |
| cancel_delayed_work(&bond->mii_work); |
| |
| if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work)) |
| cancel_delayed_work(&bond->arp_work); |
| |
| if (bond->params.mode == BOND_MODE_ALB && |
| delayed_work_pending(&bond->alb_work)) |
| cancel_delayed_work(&bond->alb_work); |
| |
| if (bond->params.mode == BOND_MODE_8023AD && |
| delayed_work_pending(&bond->ad_work)) |
| cancel_delayed_work(&bond->ad_work); |
| |
| if (delayed_work_pending(&bond->mcast_work)) |
| cancel_delayed_work(&bond->mcast_work); |
| } |
| |
| /* |
| * Destroy a bonding device. |
| * Must be under rtnl_lock when this function is called. |
| */ |
| static void bond_uninit(struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct vlan_entry *vlan, *tmp; |
| |
| bond_netpoll_cleanup(bond_dev); |
| |
| /* Release the bonded slaves */ |
| bond_release_all(bond_dev); |
| |
| list_del(&bond->bond_list); |
| |
| bond_work_cancel_all(bond); |
| |
| bond_remove_proc_entry(bond); |
| |
| bond_debug_unregister(bond); |
| |
| __hw_addr_flush(&bond->mc_list); |
| |
| list_for_each_entry_safe(vlan, tmp, &bond->vlan_list, vlan_list) { |
| list_del(&vlan->vlan_list); |
| kfree(vlan); |
| } |
| } |
| |
| /*------------------------- Module initialization ---------------------------*/ |
| |
| /* |
| * Convert string input module parms. Accept either the |
| * number of the mode or its string name. A bit complicated because |
| * some mode names are substrings of other names, and calls from sysfs |
| * may have whitespace in the name (trailing newlines, for example). |
| */ |
| int bond_parse_parm(const char *buf, const struct bond_parm_tbl *tbl) |
| { |
| int modeint = -1, i, rv; |
| char *p, modestr[BOND_MAX_MODENAME_LEN + 1] = { 0, }; |
| |
| for (p = (char *)buf; *p; p++) |
| if (!(isdigit(*p) || isspace(*p))) |
| break; |
| |
| if (*p) |
| rv = sscanf(buf, "%20s", modestr); |
| else |
| rv = sscanf(buf, "%d", &modeint); |
| |
| if (!rv) |
| return -1; |
| |
| for (i = 0; tbl[i].modename; i++) { |
| if (modeint == tbl[i].mode) |
| return tbl[i].mode; |
| if (strcmp(modestr, tbl[i].modename) == 0) |
| return tbl[i].mode; |
| } |
| |
| return -1; |
| } |
| |
| static int bond_check_params(struct bond_params *params) |
| { |
| int arp_validate_value, fail_over_mac_value, primary_reselect_value; |
| |
| /* |
| * Convert string parameters. |
| */ |
| if (mode) { |
| bond_mode = bond_parse_parm(mode, bond_mode_tbl); |
| if (bond_mode == -1) { |
| pr_err("Error: Invalid bonding mode \"%s\"\n", |
| mode == NULL ? "NULL" : mode); |
| return -EINVAL; |
| } |
| } |
| |
| if (xmit_hash_policy) { |
| if ((bond_mode != BOND_MODE_XOR) && |
| (bond_mode != BOND_MODE_8023AD)) { |
| pr_info("xmit_hash_policy param is irrelevant in mode %s\n", |
| bond_mode_name(bond_mode)); |
| } else { |
| xmit_hashtype = bond_parse_parm(xmit_hash_policy, |
| xmit_hashtype_tbl); |
| if (xmit_hashtype == -1) { |
| pr_err("Error: Invalid xmit_hash_policy \"%s\"\n", |
| xmit_hash_policy == NULL ? "NULL" : |
| xmit_hash_policy); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| if (lacp_rate) { |
| if (bond_mode != BOND_MODE_8023AD) { |
| pr_info("lacp_rate param is irrelevant in mode %s\n", |
| bond_mode_name(bond_mode)); |
| } else { |
| lacp_fast = bond_parse_parm(lacp_rate, bond_lacp_tbl); |
| if (lacp_fast == -1) { |
| pr_err("Error: Invalid lacp rate \"%s\"\n", |
| lacp_rate == NULL ? "NULL" : lacp_rate); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| if (ad_select) { |
| params->ad_select = bond_parse_parm(ad_select, ad_select_tbl); |
| if (params->ad_select == -1) { |
| pr_err("Error: Invalid ad_select \"%s\"\n", |
| ad_select == NULL ? "NULL" : ad_select); |
| return -EINVAL; |
| } |
| |
| if (bond_mode != BOND_MODE_8023AD) { |
| pr_warning("ad_select param only affects 802.3ad mode\n"); |
| } |
| } else { |
| params->ad_select = BOND_AD_STABLE; |
| } |
| |
| if (max_bonds < 0) { |
| pr_warning("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n", |
| max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS); |
| max_bonds = BOND_DEFAULT_MAX_BONDS; |
| } |
| |
| if (miimon < 0) { |
| pr_warning("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to %d\n", |
| miimon, INT_MAX, BOND_LINK_MON_INTERV); |
| miimon = BOND_LINK_MON_INTERV; |
| } |
| |
| if (updelay < 0) { |
| pr_warning("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n", |
| updelay, INT_MAX); |
| updelay = 0; |
| } |
| |
| if (downdelay < 0) { |
| pr_warning("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n", |
| downdelay, INT_MAX); |
| downdelay = 0; |
| } |
| |
| if ((use_carrier != 0) && (use_carrier != 1)) { |
| pr_warning("Warning: use_carrier module parameter (%d), not of valid value (0/1), so it was set to 1\n", |
| use_carrier); |
| use_carrier = 1; |
| } |
| |
| if (num_peer_notif < 0 || num_peer_notif > 255) { |
| pr_warning("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n", |
| num_peer_notif); |
| num_peer_notif = 1; |
| } |
| |
| /* reset values for 802.3ad */ |
| if (bond_mode == BOND_MODE_8023AD) { |
| if (!miimon) { |
| pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n"); |
| pr_warning("Forcing miimon to 100msec\n"); |
| miimon = 100; |
| } |
| } |
| |
| if (tx_queues < 1 || tx_queues > 255) { |
| pr_warning("Warning: tx_queues (%d) should be between " |
| "1 and 255, resetting to %d\n", |
| tx_queues, BOND_DEFAULT_TX_QUEUES); |
| tx_queues = BOND_DEFAULT_TX_QUEUES; |
| } |
| |
| if ((all_slaves_active != 0) && (all_slaves_active != 1)) { |
| pr_warning("Warning: all_slaves_active module parameter (%d), " |
| "not of valid value (0/1), so it was set to " |
| "0\n", all_slaves_active); |
| all_slaves_active = 0; |
| } |
| |
| if (resend_igmp < 0 || resend_igmp > 255) { |
| pr_warning("Warning: resend_igmp (%d) should be between " |
| "0 and 255, resetting to %d\n", |
| resend_igmp, BOND_DEFAULT_RESEND_IGMP); |
| resend_igmp = BOND_DEFAULT_RESEND_IGMP; |
| } |
| |
| /* reset values for TLB/ALB */ |
| if ((bond_mode == BOND_MODE_TLB) || |
| (bond_mode == BOND_MODE_ALB)) { |
| if (!miimon) { |
| pr_warning("Warning: miimon must be specified, otherwise bonding will not detect link failure and link speed which are essential for TLB/ALB load balancing\n"); |
| pr_warning("Forcing miimon to 100msec\n"); |
| miimon = 100; |
| } |
| } |
| |
| if (bond_mode == BOND_MODE_ALB) { |
| pr_notice("In ALB mode you might experience client disconnections upon reconnection of a link if the bonding module updelay parameter (%d msec) is incompatible with the forwarding delay time of the switch\n", |
| updelay); |
| } |
| |
| if (!miimon) { |
| if (updelay || downdelay) { |
| /* just warn the user the up/down delay will have |
| * no effect since miimon is zero... |
| */ |
| pr_warning("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n", |
| updelay, downdelay); |
| } |
| } else { |
| /* don't allow arp monitoring */ |
| if (arp_interval) { |
| pr_warning("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n", |
| miimon, arp_interval); |
| arp_interval = 0; |
| } |
| |
| if ((updelay % miimon) != 0) { |
| pr_warning("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n", |
| updelay, miimon, |
| (updelay / miimon) * miimon); |
| } |
| |
| updelay /= miimon; |
| |
| if ((downdelay % miimon) != 0) { |
| pr_warning("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n", |
| downdelay, miimon, |
| (downdelay / miimon) * miimon); |
| } |
| |
| downdelay /= miimon; |
| } |
| |
| if (arp_interval < 0) { |
| pr_warning("Warning: arp_interval module parameter (%d) , not in range 0-%d, so it was reset to %d\n", |
| arp_interval, INT_MAX, BOND_LINK_ARP_INTERV); |
| arp_interval = BOND_LINK_ARP_INTERV; |
| } |
| |
| for (arp_ip_count = 0; |
| (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[arp_ip_count]; |
| arp_ip_count++) { |
| /* not complete check, but should be good enough to |
| catch mistakes */ |
| if (!isdigit(arp_ip_target[arp_ip_count][0])) { |
| pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n", |
| arp_ip_target[arp_ip_count]); |
| arp_interval = 0; |
| } else { |
| __be32 ip = in_aton(arp_ip_target[arp_ip_count]); |
| arp_target[arp_ip_count] = ip; |
| } |
| } |
| |
| if (arp_interval && !arp_ip_count) { |
| /* don't allow arping if no arp_ip_target given... */ |
| pr_warning("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n", |
| arp_interval); |
| arp_interval = 0; |
| } |
| |
| if (arp_validate) { |
| if (bond_mode != BOND_MODE_ACTIVEBACKUP) { |
| pr_err("arp_validate only supported in active-backup mode\n"); |
| return -EINVAL; |
| } |
| if (!arp_interval) { |
| pr_err("arp_validate requires arp_interval\n"); |
| return -EINVAL; |
| } |
| |
| arp_validate_value = bond_parse_parm(arp_validate, |
| arp_validate_tbl); |
| if (arp_validate_value == -1) { |
| pr_err("Error: invalid arp_validate \"%s\"\n", |
| arp_validate == NULL ? "NULL" : arp_validate); |
| return -EINVAL; |
| } |
| } else |
| arp_validate_value = 0; |
| |
| if (miimon) { |
| pr_info("MII link monitoring set to %d ms\n", miimon); |
| } else if (arp_interval) { |
| int i; |
| |
| pr_info("ARP monitoring set to %d ms, validate %s, with %d target(s):", |
| arp_interval, |
| arp_validate_tbl[arp_validate_value].modename, |
| arp_ip_count); |
| |
| for (i = 0; i < arp_ip_count; i++) |
| pr_info(" %s", arp_ip_target[i]); |
| |
| pr_info("\n"); |
| |
| } else if (max_bonds) { |
| /* miimon and arp_interval not set, we need one so things |
| * work as expected, see bonding.txt for details |
| */ |
| pr_warning("Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.\n"); |
| } |
| |
| if (primary && !USES_PRIMARY(bond_mode)) { |
| /* currently, using a primary only makes sense |
| * in active backup, TLB or ALB modes |
| */ |
| pr_warning("Warning: %s primary device specified but has no effect in %s mode\n", |
| primary, bond_mode_name(bond_mode)); |
| primary = NULL; |
| } |
| |
| if (primary && primary_reselect) { |
| primary_reselect_value = bond_parse_parm(primary_reselect, |
| pri_reselect_tbl); |
| if (primary_reselect_value == -1) { |
| pr_err("Error: Invalid primary_reselect \"%s\"\n", |
| primary_reselect == |
| NULL ? "NULL" : primary_reselect); |
| return -EINVAL; |
| } |
| } else { |
| primary_reselect_value = BOND_PRI_RESELECT_ALWAYS; |
| } |
| |
| if (fail_over_mac) { |
| fail_over_mac_value = bond_parse_parm(fail_over_mac, |
| fail_over_mac_tbl); |
| if (fail_over_mac_value == -1) { |
| pr_err("Error: invalid fail_over_mac \"%s\"\n", |
| arp_validate == NULL ? "NULL" : arp_validate); |
| return -EINVAL; |
| } |
| |
| if (bond_mode != BOND_MODE_ACTIVEBACKUP) |
| pr_warning("Warning: fail_over_mac only affects active-backup mode.\n"); |
| } else { |
| fail_over_mac_value = BOND_FOM_NONE; |
| } |
| |
| /* fill params struct with the proper values */ |
| params->mode = bond_mode; |
| params->xmit_policy = xmit_hashtype; |
| params->miimon = miimon; |
| params->num_peer_notif = num_peer_notif; |
| params->arp_interval = arp_interval; |
| params->arp_validate = arp_validate_value; |
| params->updelay = updelay; |
| params->downdelay = downdelay; |
| params->use_carrier = use_carrier; |
| params->lacp_fast = lacp_fast; |
| params->primary[0] = 0; |
| params->primary_reselect = primary_reselect_value; |
| params->fail_over_mac = fail_over_mac_value; |
| params->tx_queues = tx_queues; |
| params->all_slaves_active = all_slaves_active; |
| params->resend_igmp = resend_igmp; |
| |
| if (primary) { |
| strncpy(params->primary, primary, IFNAMSIZ); |
| params->primary[IFNAMSIZ - 1] = 0; |
| } |
| |
| memcpy(params->arp_targets, arp_target, sizeof(arp_target)); |
| |
| return 0; |
| } |
| |
| static struct lock_class_key bonding_netdev_xmit_lock_key; |
| static struct lock_class_key bonding_netdev_addr_lock_key; |
| |
| static void bond_set_lockdep_class_one(struct net_device *dev, |
| struct netdev_queue *txq, |
| void *_unused) |
| { |
| lockdep_set_class(&txq->_xmit_lock, |
| &bonding_netdev_xmit_lock_key); |
| } |
| |
| static void bond_set_lockdep_class(struct net_device *dev) |
| { |
| lockdep_set_class(&dev->addr_list_lock, |
| &bonding_netdev_addr_lock_key); |
| netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL); |
| } |
| |
| /* |
| * Called from registration process |
| */ |
| static int bond_init(struct net_device *bond_dev) |
| { |
| struct bonding *bond = netdev_priv(bond_dev); |
| struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id); |
| |
| pr_debug("Begin bond_init for %s\n", bond_dev->name); |
| |
| bond->wq = create_singlethread_workqueue(bond_dev->name); |
| if (!bond->wq) |
| return -ENOMEM; |
| |
| bond_set_lockdep_class(bond_dev); |
| |
| bond_create_proc_entry(bond); |
| list_add_tail(&bond->bond_list, &bn->dev_list); |
| |
| bond_prepare_sysfs_group(bond); |
| |
| bond_debug_register(bond); |
| |
| __hw_addr_init(&bond->mc_list); |
| return 0; |
| } |
| |
| static int bond_validate(struct nlattr *tb[], struct nlattr *data[]) |
| { |
| if (tb[IFLA_ADDRESS]) { |
| if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) |
| return -EINVAL; |
| if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS]))) |
| return -EADDRNOTAVAIL; |
| } |
| return 0; |
| } |
| |
| static struct rtnl_link_ops bond_link_ops __read_mostly = { |
| .kind = "bond", |
| .priv_size = sizeof(struct bonding), |
| .setup = bond_setup, |
| .validate = bond_validate, |
| }; |
| |
| /* Create a new bond based on the specified name and bonding parameters. |
| * If name is NULL, obtain a suitable "bond%d" name for us. |
| * Caller must NOT hold rtnl_lock; we need to release it here before we |
| * set up our sysfs entries. |
| */ |
| int bond_create(struct net *net, const char *name) |
| { |
| struct net_device *bond_dev; |
| int res; |
| |
| rtnl_lock(); |
| |
| bond_dev = alloc_netdev_mq(sizeof(struct bonding), |
| name ? name : "bond%d", |
| bond_setup, tx_queues); |
| if (!bond_dev) { |
| pr_err("%s: eek! can't alloc netdev!\n", name); |
| rtnl_unlock(); |
| return -ENOMEM; |
| } |
| |
| dev_net_set(bond_dev, net); |
| bond_dev->rtnl_link_ops = &bond_link_ops; |
| |
| res = register_netdevice(bond_dev); |
| |
| netif_carrier_off(bond_dev); |
| |
| rtnl_unlock(); |
| if (res < 0) |
| bond_destructor(bond_dev); |
| return res; |
| } |
| |
| static int __net_init bond_net_init(struct net *net) |
| { |
| struct bond_net *bn = net_generic(net, bond_net_id); |
| |
| bn->net = net; |
| INIT_LIST_HEAD(&bn->dev_list); |
| |
| bond_create_proc_dir(bn); |
| |
| return 0; |
| } |
| |
| static void __net_exit bond_net_exit(struct net *net) |
| { |
| struct bond_net *bn = net_generic(net, bond_net_id); |
| |
| bond_destroy_proc_dir(bn); |
| } |
| |
| static struct pernet_operations bond_net_ops = { |
| .init = bond_net_init, |
| .exit = bond_net_exit, |
| .id = &bond_net_id, |
| .size = sizeof(struct bond_net), |
| }; |
| |
| static int __init bonding_init(void) |
| { |
| int i; |
| int res; |
| |
| pr_info("%s", bond_version); |
| |
| res = bond_check_params(&bonding_defaults); |
| if (res) |
| goto out; |
| |
| res = register_pernet_subsys(&bond_net_ops); |
| if (res) |
| goto out; |
| |
| res = rtnl_link_register(&bond_link_ops); |
| if (res) |
| goto err_link; |
| |
| bond_create_debugfs(); |
| |
| for (i = 0; i < max_bonds; i++) { |
| res = bond_create(&init_net, NULL); |
| if (res) |
| goto err; |
| } |
| |
| res = bond_create_sysfs(); |
| if (res) |
| goto err; |
| |
| register_netdevice_notifier(&bond_netdev_notifier); |
| register_inetaddr_notifier(&bond_inetaddr_notifier); |
| out: |
| return res; |
| err: |
| rtnl_link_unregister(&bond_link_ops); |
| err_link: |
| unregister_pernet_subsys(&bond_net_ops); |
| goto out; |
| |
| } |
| |
| static void __exit bonding_exit(void) |
| { |
| unregister_netdevice_notifier(&bond_netdev_notifier); |
| unregister_inetaddr_notifier(&bond_inetaddr_notifier); |
| |
| bond_destroy_sysfs(); |
| bond_destroy_debugfs(); |
| |
| rtnl_link_unregister(&bond_link_ops); |
| unregister_pernet_subsys(&bond_net_ops); |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /* |
| * Make sure we don't have an imbalance on our netpoll blocking |
| */ |
| WARN_ON(atomic_read(&netpoll_block_tx)); |
| #endif |
| } |
| |
| module_init(bonding_init); |
| module_exit(bonding_exit); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION); |
| MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others"); |
| MODULE_ALIAS_RTNL_LINK("bond"); |