Merge branches 'x86/xen', 'x86/build', 'x86/microcode', 'x86/mm-debug-v2', 'x86/memory-corruption-check', 'x86/early-printk', 'x86/xsave', 'x86/ptrace-v2', 'x86/quirks', 'x86/setup', 'x86/spinlocks' and 'x86/signal' into x86/core-v2
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 25efbaf..2443f5b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -658,11 +658,12 @@
earlyprintk= [X86-32,X86-64,SH,BLACKFIN]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
+ earlyprintk=dbgp
Append ",keep" to not disable it when the real console
takes over.
- Only vga or serial at a time, not both.
+ Only vga or serial or usb debug port at a time.
Currently only ttyS0 and ttyS1 are supported.
@@ -1231,6 +1232,29 @@
or
memmap=0x10000$0x18690000
+ memory_corruption_check=0/1 [X86]
+ Some BIOSes seem to corrupt the first 64k of
+ memory when doing things like suspend/resume.
+ Setting this option will scan the memory
+ looking for corruption. Enabling this will
+ both detect corruption and prevent the kernel
+ from using the memory being corrupted.
+ However, its intended as a diagnostic tool; if
+ repeatable BIOS-originated corruption always
+ affects the same memory, you can use memmap=
+ to prevent the kernel from using that memory.
+
+ memory_corruption_check_size=size [X86]
+ By default it checks for corruption in the low
+ 64k, making this memory unavailable for normal
+ use. Use this parameter to scan for
+ corruption in more or less memory.
+
+ memory_corruption_check_period=seconds [X86]
+ By default it checks for corruption every 60
+ seconds. Use this parameter to check at some
+ other rate. 0 disables periodic checking.
+
memtest= [KNL,X86] Enable memtest
Format: <integer>
range: 0,4 : pattern number
diff --git a/MAINTAINERS b/MAINTAINERS
index 587f418..8bf72d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -390,6 +390,11 @@
T: git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
S: Supported
+AMD MICROCODE UPDATE SUPPORT
+P: Peter Oruba
+M: peter.oruba@amd.com
+S: Supported
+
AMS (Apple Motion Sensor) DRIVER
P: Stelian Pop
M: stelian@popies.net
diff --git a/arch/ia64/include/asm/siginfo.h b/arch/ia64/include/asm/siginfo.h
index 9294e4b..118d429 100644
--- a/arch/ia64/include/asm/siginfo.h
+++ b/arch/ia64/include/asm/siginfo.h
@@ -113,11 +113,6 @@
#undef NSIGSEGV
#define NSIGSEGV 3
-/*
- * SIGTRAP si_codes
- */
-#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
-#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */
#undef NSIGTRAP
#define NSIGTRAP 4
diff --git a/arch/powerpc/include/asm/siginfo.h b/arch/powerpc/include/asm/siginfo.h
index 12f1bce..49495b0 100644
--- a/arch/powerpc/include/asm/siginfo.h
+++ b/arch/powerpc/include/asm/siginfo.h
@@ -15,11 +15,6 @@
#include <asm-generic/siginfo.h>
-/*
- * SIGTRAP si_codes
- */
-#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
-#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */
#undef NSIGTRAP
#define NSIGTRAP 4
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 44d4f21..fc8351f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -778,23 +778,45 @@
Say N otherwise.
config MICROCODE
- tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+ tristate "/dev/cpu/microcode - microcode support"
select FW_LOADER
---help---
If you say Y here, you will be able to update the microcode on
- Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
- Pentium III, Pentium 4, Xeon etc. You will obviously need the
- actual microcode binary data itself which is not shipped with the
- Linux kernel.
+ certain Intel and AMD processors. The Intel support is for the
+ IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
+ Pentium 4, Xeon etc. The AMD support is for family 0x10 and
+ 0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
+ You will obviously need the actual microcode binary data itself
+ which is not shipped with the Linux kernel.
- For latest news and information on obtaining all the required
- ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
+ This option selects the general module only, you need to select
+ at least one vendor specific module as well.
To compile this driver as a module, choose M here: the
module will be called microcode.
-config MICROCODE_OLD_INTERFACE
+config MICROCODE_INTEL
+ bool "Intel microcode patch loading support"
+ depends on MICROCODE
+ default MICROCODE
+ select FW_LOADER
+ --help---
+ This options enables microcode patch loading support for Intel
+ processors.
+
+ For latest news and information on obtaining all the required
+ Intel ingredients for this driver, check:
+ <http://www.urbanmyth.org/microcode/>.
+
+config MICROCODE_AMD
+ bool "AMD microcode patch loading support"
+ depends on MICROCODE
+ select FW_LOADER
+ --help---
+ If you select this option, microcode patch loading support for AMD
+ processors will be enabled.
+
+ config MICROCODE_OLD_INTERFACE
def_bool y
depends on MICROCODE
@@ -1061,6 +1083,56 @@
low memory. Setting this option will put user-space page table
entries in high memory.
+config X86_CHECK_BIOS_CORRUPTION
+ bool "Check for low memory corruption"
+ help
+ Periodically check for memory corruption in low memory, which
+ is suspected to be caused by BIOS. Even when enabled in the
+ configuration, it is disabled at runtime. Enable it by
+ setting "memory_corruption_check=1" on the kernel command
+ line. By default it scans the low 64k of memory every 60
+ seconds; see the memory_corruption_check_size and
+ memory_corruption_check_period parameters in
+ Documentation/kernel-parameters.txt to adjust this.
+
+ When enabled with the default parameters, this option has
+ almost no overhead, as it reserves a relatively small amount
+ of memory and scans it infrequently. It both detects corruption
+ and prevents it from affecting the running system.
+
+ It is, however, intended as a diagnostic tool; if repeatable
+ BIOS-originated corruption always affects the same memory,
+ you can use memmap= to prevent the kernel from using that
+ memory.
+
+config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
+ bool "Set the default setting of memory_corruption_check"
+ depends on X86_CHECK_BIOS_CORRUPTION
+ default y
+ help
+ Set whether the default state of memory_corruption_check is
+ on or off.
+
+config X86_RESERVE_LOW_64K
+ bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
+ default y
+ help
+ Reserve the first 64K of physical RAM on BIOSes that are known
+ to potentially corrupt that memory range. A numbers of BIOSes are
+ known to utilize this area during suspend/resume, so it must not
+ be used by the kernel.
+
+ Set this to N if you are absolutely sure that you trust the BIOS
+ to get all its memory reservations and usages right.
+
+ If you have doubts about the BIOS (e.g. suspend/resume does not
+ work or there's kernel crashes after certain hardware hotplug
+ events) and it's not AMI or Phoenix, then you might want to enable
+ X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
+ corruption patterns.
+
+ Say Y if unsure.
+
config MATH_EMULATION
bool
prompt "Math emulation" if X86_32
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 092f019..2a3dfbd 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -43,6 +43,19 @@
with klogd/syslogd or the X server. You should normally N here,
unless you want to debug such a crash.
+config EARLY_PRINTK_DBGP
+ bool "Early printk via EHCI debug port"
+ default n
+ depends on EARLY_PRINTK && PCI
+ help
+ Write kernel log output directly into the EHCI debug port.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. For normal operation
+ it is not recommended because it looks ugly and doesn't cooperate
+ with klogd/syslogd or the X server. You should normally N here,
+ unless you want to debug such a crash. You need usb debug device.
+
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index e372b58..b72b4f7 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -45,3 +45,8 @@
# cpu entries
cflags-$(CONFIG_X86_GENERIC) += $(call tune,generic,$(call tune,i686))
+# Bug fix for binutils: this option is required in order to keep
+# binutils from generating NOPL instructions against our will.
+ifneq ($(CONFIG_X86_P6_NOP),y)
+cflags-y += $(call cc-option,-Wa$(comma)-mtune=generic32,)
+endif
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 7ee102f..cd48c72 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -72,9 +72,7 @@
KBUILD_CFLAGS += $(call cc-option,-m32)
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
-$(obj)/zImage: IMAGE_OFFSET := 0x1000
$(obj)/zImage: asflags-y := $(SVGA_MODE) $(RAMDISK)
-$(obj)/bzImage: IMAGE_OFFSET := 0x100000
$(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__
$(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
$(obj)/bzImage: BUILDFLAGS := -b
@@ -117,7 +115,7 @@
$(call if_changed,objcopy)
$(obj)/compressed/vmlinux: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
FDARGS =
@@ -181,6 +179,7 @@
mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
-no-emul-boot -boot-load-size 4 -boot-info-table \
$(obj)/isoimage
+ isohybrid $(obj)/image.iso 2>/dev/null || true
rm -rf $(obj)/isoimage
zlilo: $(BOOTIMAGE)
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 92fdd35..1771c80 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -27,9 +27,8 @@
$(call if_changed,objcopy)
-ifeq ($(CONFIG_X86_32),y)
-targets += vmlinux.bin.all vmlinux.relocs
-hostprogs-y := relocs
+targets += vmlinux.bin.all vmlinux.relocs relocs
+hostprogs-$(CONFIG_X86_32) += relocs
quiet_cmd_relocs = RELOCS $@
cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
@@ -43,6 +42,8 @@
$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
$(call if_changed,relocbin)
+ifeq ($(CONFIG_X86_32),y)
+
ifdef CONFIG_RELOCATABLE
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
$(call if_changed,gzip)
@@ -59,6 +60,5 @@
LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
endif
-
$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,ld)
diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c
index d93cbc6..1aae8f3 100644
--- a/arch/x86/boot/edd.c
+++ b/arch/x86/boot/edd.c
@@ -41,6 +41,7 @@
char *mbrbuf_ptr, *mbrbuf_end;
u32 buf_base, mbr_base;
extern char _end[];
+ u16 mbr_magic;
sector_size = ei->params.bytes_per_sector;
if (!sector_size)
@@ -58,11 +59,15 @@
if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr)
return -1;
+ memset(mbrbuf_ptr, 0, sector_size);
if (read_mbr(devno, mbrbuf_ptr))
return -1;
*mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET];
- return 0;
+ mbr_magic = *(u16 *)&mbrbuf_ptr[510];
+
+ /* check for valid MBR magic */
+ return mbr_magic == 0xAA55 ? 0 : -1;
}
static int get_edd_info(u8 devno, struct edd_info *ei)
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 401ad99..1e6fe02 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -224,7 +224,7 @@
static void vesa_store_mode_params_graphics(void)
{
/* Tell the kernel we're in VESA graphics mode */
- boot_params.screen_info.orig_video_isVGA = 0x23;
+ boot_params.screen_info.orig_video_isVGA = VIDEO_TYPE_VLFB;
/* Mode parameters */
boot_params.screen_info.vesa_attributes = vminfo.mode_attr;
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index ef9a520..ca226ca 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1535,7 +1535,6 @@
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index e620ea6..2c4b1c7 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1505,7 +1505,6 @@
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_LOGO=y
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 8d64c1b..4bc02b2 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -351,31 +351,28 @@
savesegment(es, tmp);
err |= __put_user(tmp, (unsigned int __user *)&sc->es);
- err |= __put_user((u32)regs->di, &sc->di);
- err |= __put_user((u32)regs->si, &sc->si);
- err |= __put_user((u32)regs->bp, &sc->bp);
- err |= __put_user((u32)regs->sp, &sc->sp);
- err |= __put_user((u32)regs->bx, &sc->bx);
- err |= __put_user((u32)regs->dx, &sc->dx);
- err |= __put_user((u32)regs->cx, &sc->cx);
- err |= __put_user((u32)regs->ax, &sc->ax);
- err |= __put_user((u32)regs->cs, &sc->cs);
- err |= __put_user((u32)regs->ss, &sc->ss);
+ err |= __put_user(regs->di, &sc->di);
+ err |= __put_user(regs->si, &sc->si);
+ err |= __put_user(regs->bp, &sc->bp);
+ err |= __put_user(regs->sp, &sc->sp);
+ err |= __put_user(regs->bx, &sc->bx);
+ err |= __put_user(regs->dx, &sc->dx);
+ err |= __put_user(regs->cx, &sc->cx);
+ err |= __put_user(regs->ax, &sc->ax);
+ err |= __put_user(regs->cs, &sc->cs);
+ err |= __put_user(regs->ss, &sc->ss);
err |= __put_user(current->thread.trap_no, &sc->trapno);
err |= __put_user(current->thread.error_code, &sc->err);
- err |= __put_user((u32)regs->ip, &sc->ip);
- err |= __put_user((u32)regs->flags, &sc->flags);
- err |= __put_user((u32)regs->sp, &sc->sp_at_signal);
+ err |= __put_user(regs->ip, &sc->ip);
+ err |= __put_user(regs->flags, &sc->flags);
+ err |= __put_user(regs->sp, &sc->sp_at_signal);
tmp = save_i387_xstate_ia32(fpstate);
if (tmp < 0)
err = -EFAULT;
- else {
- clear_used_math();
- stts();
+ else
err |= __put_user(ptr_to_compat(tmp ? fpstate : NULL),
&sc->fpstate);
- }
/* non-iBCS2 extensions.. */
err |= __put_user(mask, &sc->oldmask);
@@ -444,21 +441,18 @@
frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
+ return -EFAULT;
- err |= __put_user(sig, &frame->sig);
- if (err)
- goto give_sigsegv;
+ if (__put_user(sig, &frame->sig))
+ return -EFAULT;
- err |= ia32_setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]);
- if (err)
- goto give_sigsegv;
+ if (ia32_setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]))
+ return -EFAULT;
if (_COMPAT_NSIG_WORDS > 1) {
- err |= __copy_to_user(frame->extramask, &set->sig[1],
- sizeof(frame->extramask));
- if (err)
- goto give_sigsegv;
+ if (__copy_to_user(frame->extramask, &set->sig[1],
+ sizeof(frame->extramask)))
+ return -EFAULT;
}
if (ka->sa.sa_flags & SA_RESTORER) {
@@ -479,7 +473,7 @@
*/
err |= __copy_to_user(frame->retcode, &code, 8);
if (err)
- goto give_sigsegv;
+ return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long) frame;
@@ -502,10 +496,6 @@
#endif
return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
}
int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
@@ -533,14 +523,14 @@
frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
+ return -EFAULT;
err |= __put_user(sig, &frame->sig);
err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo);
err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc);
err |= copy_siginfo_to_user32(&frame->info, info);
if (err)
- goto give_sigsegv;
+ return -EFAULT;
/* Create the ucontext. */
if (cpu_has_xsave)
@@ -556,7 +546,7 @@
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
- goto give_sigsegv;
+ return -EFAULT;
if (ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
@@ -571,7 +561,7 @@
*/
err |= __copy_to_user(frame->retcode, &code, 8);
if (err)
- goto give_sigsegv;
+ return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long) frame;
@@ -599,8 +589,4 @@
#endif
return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
}
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index c9be69f..5098585 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -10,7 +10,7 @@
# Do not profile debug and lowlevel utilities
CFLAGS_REMOVE_tsc.o = -pg
CFLAGS_REMOVE_rtc.o = -pg
-CFLAGS_REMOVE_paravirt.o = -pg
+CFLAGS_REMOVE_paravirt-spinlocks.o = -pg
endif
#
@@ -51,7 +51,6 @@
obj-$(CONFIG_MCA) += mca_32.o
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
-obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_PCI) += early-quirks.o
apm-y := apm_32.o
obj-$(CONFIG_APM) += apm.o
@@ -90,7 +89,7 @@
obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
obj-$(CONFIG_KVM_GUEST) += kvm.o
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
-obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o
obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o
obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
@@ -100,6 +99,11 @@
obj-$(CONFIG_OLPC) += olpc.o
+microcode-y := microcode_core.o
+microcode-$(CONFIG_MICROCODE_INTEL) += microcode_intel.o
+microcode-$(CONFIG_MICROCODE_AMD) += microcode_amd.o
+obj-$(CONFIG_MICROCODE) += microcode.o
+
###
# 64 bit specific files
ifeq ($(CONFIG_X86_64),y)
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index c2ac1b4..eb875cd 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1418,8 +1418,16 @@
*/
static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
{
- pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", d->ident);
- acpi_skip_timer_override = 1;
+ /*
+ * The ati_ixp4x0_rev() early PCI quirk should have set
+ * the acpi_skip_timer_override flag already:
+ */
+ if (!acpi_skip_timer_override) {
+ WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
+ pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+ d->ident);
+ acpi_skip_timer_override = 1;
+ }
return 0;
}
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 7581b62..fb789dd 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1121,16 +1121,5 @@
xsave_init();
}
-#ifdef CONFIG_HOTPLUG_CPU
-void __cpuinit cpu_uninit(void)
-{
- int cpu = raw_smp_processor_id();
- cpu_clear(cpu, cpu_initialized);
-
- /* lazy TLB state */
- per_cpu(cpu_tlbstate, cpu).state = 0;
- per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
-}
-#endif
#endif
diff --git a/arch/x86/kernel/doublefault_32.c b/arch/x86/kernel/doublefault_32.c
index a47798b..395acb1 100644
--- a/arch/x86/kernel/doublefault_32.c
+++ b/arch/x86/kernel/doublefault_32.c
@@ -66,6 +66,6 @@
.ds = __USER_DS,
.fs = __KERNEL_PERCPU,
- .__cr3 = __pa(swapper_pg_dir)
+ .__cr3 = __phys_addr_const((unsigned long)swapper_pg_dir)
}
};
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 24bb5fa..733c4f8 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -95,6 +95,52 @@
}
+static u32 ati_ixp4x0_rev(int num, int slot, int func)
+{
+ u32 d;
+ u8 b;
+
+ b = read_pci_config_byte(num, slot, func, 0xac);
+ b &= ~(1<<5);
+ write_pci_config_byte(num, slot, func, 0xac, b);
+
+ d = read_pci_config(num, slot, func, 0x70);
+ d |= 1<<8;
+ write_pci_config(num, slot, func, 0x70, d);
+
+ d = read_pci_config(num, slot, func, 0x8);
+ d &= 0xff;
+ return d;
+}
+
+static void __init ati_bugs(int num, int slot, int func)
+{
+#if defined(CONFIG_ACPI) && defined (CONFIG_X86_IO_APIC)
+ u32 d;
+ u8 b;
+
+ if (acpi_use_timer_override)
+ return;
+
+ d = ati_ixp4x0_rev(num, slot, func);
+ if (d < 0x82)
+ acpi_skip_timer_override = 1;
+ else {
+ /* check for IRQ0 interrupt swap */
+ outb(0x72, 0xcd6); b = inb(0xcd7);
+ if (!(b & 0x2))
+ acpi_skip_timer_override = 1;
+ }
+
+ if (acpi_skip_timer_override) {
+ printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
+ printk(KERN_INFO "Ignoring ACPI timer override.\n");
+ printk(KERN_INFO "If you got timer trouble "
+ "try acpi_use_timer_override\n");
+ }
+#endif
+}
+
#ifdef CONFIG_DMAR
static void __init intel_g33_dmar(int num, int slot, int func)
{
@@ -128,6 +174,8 @@
PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
+ PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
#ifdef CONFIG_DMAR
{ PCI_VENDOR_ID_INTEL, 0x29c0,
PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, intel_g33_dmar },
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index ff9e735..34ad997 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -3,11 +3,19 @@
#include <linux/init.h>
#include <linux/string.h>
#include <linux/screen_info.h>
+#include <linux/usb/ch9.h>
+#include <linux/pci_regs.h>
+#include <linux/pci_ids.h>
+#include <linux/errno.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/fcntl.h>
#include <asm/setup.h>
#include <xen/hvc-console.h>
+#include <asm/pci-direct.h>
+#include <asm/pgtable.h>
+#include <asm/fixmap.h>
+#include <linux/usb/ehci_def.h>
/* Simple VGA output */
#define VGABASE (__ISA_IO_base + 0xb8000)
@@ -78,6 +86,7 @@
static int early_serial_putc(unsigned char ch)
{
unsigned timeout = 0xffff;
+
while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
cpu_relax();
outb(ch, early_serial_base + TXR);
@@ -111,7 +120,7 @@
if (!strncmp(s, "0x", 2)) {
early_serial_base = simple_strtoul(s, &e, 16);
} else {
- static int bases[] = { 0x3f8, 0x2f8 };
+ static const int __initconst bases[] = { 0x3f8, 0x2f8 };
if (!strncmp(s, "ttyS", 4))
s += 4;
@@ -151,6 +160,721 @@
.index = -1,
};
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+
+static struct ehci_caps __iomem *ehci_caps;
+static struct ehci_regs __iomem *ehci_regs;
+static struct ehci_dbg_port __iomem *ehci_debug;
+static unsigned int dbgp_endpoint_out;
+
+struct ehci_dev {
+ u32 bus;
+ u32 slot;
+ u32 func;
+};
+
+static struct ehci_dev ehci_dev;
+
+#define USB_DEBUG_DEVNUM 127
+
+#define DBGP_DATA_TOGGLE 0x8800
+
+static inline u32 dbgp_pid_update(u32 x, u32 tok)
+{
+ return ((x ^ DBGP_DATA_TOGGLE) & 0xffff00) | (tok & 0xff);
+}
+
+static inline u32 dbgp_len_update(u32 x, u32 len)
+{
+ return (x & ~0x0f) | (len & 0x0f);
+}
+
+/*
+ * USB Packet IDs (PIDs)
+ */
+
+/* token */
+#define USB_PID_OUT 0xe1
+#define USB_PID_IN 0x69
+#define USB_PID_SOF 0xa5
+#define USB_PID_SETUP 0x2d
+/* handshake */
+#define USB_PID_ACK 0xd2
+#define USB_PID_NAK 0x5a
+#define USB_PID_STALL 0x1e
+#define USB_PID_NYET 0x96
+/* data */
+#define USB_PID_DATA0 0xc3
+#define USB_PID_DATA1 0x4b
+#define USB_PID_DATA2 0x87
+#define USB_PID_MDATA 0x0f
+/* Special */
+#define USB_PID_PREAMBLE 0x3c
+#define USB_PID_ERR 0x3c
+#define USB_PID_SPLIT 0x78
+#define USB_PID_PING 0xb4
+#define USB_PID_UNDEF_0 0xf0
+
+#define USB_PID_DATA_TOGGLE 0x88
+#define DBGP_CLAIM (DBGP_OWNER | DBGP_ENABLED | DBGP_INUSE)
+
+#define PCI_CAP_ID_EHCI_DEBUG 0xa
+
+#define HUB_ROOT_RESET_TIME 50 /* times are in msec */
+#define HUB_SHORT_RESET_TIME 10
+#define HUB_LONG_RESET_TIME 200
+#define HUB_RESET_TIMEOUT 500
+
+#define DBGP_MAX_PACKET 8
+
+static int dbgp_wait_until_complete(void)
+{
+ u32 ctrl;
+ int loop = 0x100000;
+
+ do {
+ ctrl = readl(&ehci_debug->control);
+ /* Stop when the transaction is finished */
+ if (ctrl & DBGP_DONE)
+ break;
+ } while (--loop > 0);
+
+ if (!loop)
+ return -1;
+
+ /*
+ * Now that we have observed the completed transaction,
+ * clear the done bit.
+ */
+ writel(ctrl | DBGP_DONE, &ehci_debug->control);
+ return (ctrl & DBGP_ERROR) ? -DBGP_ERRCODE(ctrl) : DBGP_LEN(ctrl);
+}
+
+static void dbgp_mdelay(int ms)
+{
+ int i;
+
+ while (ms--) {
+ for (i = 0; i < 1000; i++)
+ outb(0x1, 0x80);
+ }
+}
+
+static void dbgp_breath(void)
+{
+ /* Sleep to give the debug port a chance to breathe */
+}
+
+static int dbgp_wait_until_done(unsigned ctrl)
+{
+ u32 pids, lpid;
+ int ret;
+ int loop = 3;
+
+retry:
+ writel(ctrl | DBGP_GO, &ehci_debug->control);
+ ret = dbgp_wait_until_complete();
+ pids = readl(&ehci_debug->pids);
+ lpid = DBGP_PID_GET(pids);
+
+ if (ret < 0)
+ return ret;
+
+ /*
+ * If the port is getting full or it has dropped data
+ * start pacing ourselves, not necessary but it's friendly.
+ */
+ if ((lpid == USB_PID_NAK) || (lpid == USB_PID_NYET))
+ dbgp_breath();
+
+ /* If I get a NACK reissue the transmission */
+ if (lpid == USB_PID_NAK) {
+ if (--loop > 0)
+ goto retry;
+ }
+
+ return ret;
+}
+
+static void dbgp_set_data(const void *buf, int size)
+{
+ const unsigned char *bytes = buf;
+ u32 lo, hi;
+ int i;
+
+ lo = hi = 0;
+ for (i = 0; i < 4 && i < size; i++)
+ lo |= bytes[i] << (8*i);
+ for (; i < 8 && i < size; i++)
+ hi |= bytes[i] << (8*(i - 4));
+ writel(lo, &ehci_debug->data03);
+ writel(hi, &ehci_debug->data47);
+}
+
+static void dbgp_get_data(void *buf, int size)
+{
+ unsigned char *bytes = buf;
+ u32 lo, hi;
+ int i;
+
+ lo = readl(&ehci_debug->data03);
+ hi = readl(&ehci_debug->data47);
+ for (i = 0; i < 4 && i < size; i++)
+ bytes[i] = (lo >> (8*i)) & 0xff;
+ for (; i < 8 && i < size; i++)
+ bytes[i] = (hi >> (8*(i - 4))) & 0xff;
+}
+
+static int dbgp_bulk_write(unsigned devnum, unsigned endpoint,
+ const char *bytes, int size)
+{
+ u32 pids, addr, ctrl;
+ int ret;
+
+ if (size > DBGP_MAX_PACKET)
+ return -1;
+
+ addr = DBGP_EPADDR(devnum, endpoint);
+
+ pids = readl(&ehci_debug->pids);
+ pids = dbgp_pid_update(pids, USB_PID_OUT);
+
+ ctrl = readl(&ehci_debug->control);
+ ctrl = dbgp_len_update(ctrl, size);
+ ctrl |= DBGP_OUT;
+ ctrl |= DBGP_GO;
+
+ dbgp_set_data(bytes, size);
+ writel(addr, &ehci_debug->address);
+ writel(pids, &ehci_debug->pids);
+
+ ret = dbgp_wait_until_done(ctrl);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+}
+
+static int dbgp_bulk_read(unsigned devnum, unsigned endpoint, void *data,
+ int size)
+{
+ u32 pids, addr, ctrl;
+ int ret;
+
+ if (size > DBGP_MAX_PACKET)
+ return -1;
+
+ addr = DBGP_EPADDR(devnum, endpoint);
+
+ pids = readl(&ehci_debug->pids);
+ pids = dbgp_pid_update(pids, USB_PID_IN);
+
+ ctrl = readl(&ehci_debug->control);
+ ctrl = dbgp_len_update(ctrl, size);
+ ctrl &= ~DBGP_OUT;
+ ctrl |= DBGP_GO;
+
+ writel(addr, &ehci_debug->address);
+ writel(pids, &ehci_debug->pids);
+ ret = dbgp_wait_until_done(ctrl);
+ if (ret < 0)
+ return ret;
+
+ if (size > ret)
+ size = ret;
+ dbgp_get_data(data, size);
+ return ret;
+}
+
+static int dbgp_control_msg(unsigned devnum, int requesttype, int request,
+ int value, int index, void *data, int size)
+{
+ u32 pids, addr, ctrl;
+ struct usb_ctrlrequest req;
+ int read;
+ int ret;
+
+ read = (requesttype & USB_DIR_IN) != 0;
+ if (size > (read ? DBGP_MAX_PACKET:0))
+ return -1;
+
+ /* Compute the control message */
+ req.bRequestType = requesttype;
+ req.bRequest = request;
+ req.wValue = cpu_to_le16(value);
+ req.wIndex = cpu_to_le16(index);
+ req.wLength = cpu_to_le16(size);
+
+ pids = DBGP_PID_SET(USB_PID_DATA0, USB_PID_SETUP);
+ addr = DBGP_EPADDR(devnum, 0);
+
+ ctrl = readl(&ehci_debug->control);
+ ctrl = dbgp_len_update(ctrl, sizeof(req));
+ ctrl |= DBGP_OUT;
+ ctrl |= DBGP_GO;
+
+ /* Send the setup message */
+ dbgp_set_data(&req, sizeof(req));
+ writel(addr, &ehci_debug->address);
+ writel(pids, &ehci_debug->pids);
+ ret = dbgp_wait_until_done(ctrl);
+ if (ret < 0)
+ return ret;
+
+ /* Read the result */
+ return dbgp_bulk_read(devnum, 0, data, size);
+}
+
+
+/* Find a PCI capability */
+static u32 __init find_cap(u32 num, u32 slot, u32 func, int cap)
+{
+ u8 pos;
+ int bytes;
+
+ if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+ PCI_STATUS_CAP_LIST))
+ return 0;
+
+ pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+ for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
+ u8 id;
+
+ pos &= ~3;
+ id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+ if (id == 0xff)
+ break;
+ if (id == cap)
+ return pos;
+
+ pos = read_pci_config_byte(num, slot, func,
+ pos+PCI_CAP_LIST_NEXT);
+ }
+ return 0;
+}
+
+static u32 __init __find_dbgp(u32 bus, u32 slot, u32 func)
+{
+ u32 class;
+
+ class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
+ if ((class >> 8) != PCI_CLASS_SERIAL_USB_EHCI)
+ return 0;
+
+ return find_cap(bus, slot, func, PCI_CAP_ID_EHCI_DEBUG);
+}
+
+static u32 __init find_dbgp(int ehci_num, u32 *rbus, u32 *rslot, u32 *rfunc)
+{
+ u32 bus, slot, func;
+
+ for (bus = 0; bus < 256; bus++) {
+ for (slot = 0; slot < 32; slot++) {
+ for (func = 0; func < 8; func++) {
+ unsigned cap;
+
+ cap = __find_dbgp(bus, slot, func);
+
+ if (!cap)
+ continue;
+ if (ehci_num-- != 0)
+ continue;
+ *rbus = bus;
+ *rslot = slot;
+ *rfunc = func;
+ return cap;
+ }
+ }
+ }
+ return 0;
+}
+
+static int ehci_reset_port(int port)
+{
+ u32 portsc;
+ u32 delay_time, delay;
+ int loop;
+
+ /* Reset the usb debug port */
+ portsc = readl(&ehci_regs->port_status[port - 1]);
+ portsc &= ~PORT_PE;
+ portsc |= PORT_RESET;
+ writel(portsc, &ehci_regs->port_status[port - 1]);
+
+ delay = HUB_ROOT_RESET_TIME;
+ for (delay_time = 0; delay_time < HUB_RESET_TIMEOUT;
+ delay_time += delay) {
+ dbgp_mdelay(delay);
+
+ portsc = readl(&ehci_regs->port_status[port - 1]);
+ if (portsc & PORT_RESET) {
+ /* force reset to complete */
+ loop = 2;
+ writel(portsc & ~(PORT_RWC_BITS | PORT_RESET),
+ &ehci_regs->port_status[port - 1]);
+ do {
+ portsc = readl(&ehci_regs->port_status[port-1]);
+ } while ((portsc & PORT_RESET) && (--loop > 0));
+ }
+
+ /* Device went away? */
+ if (!(portsc & PORT_CONNECT))
+ return -ENOTCONN;
+
+ /* bomb out completely if something weird happend */
+ if ((portsc & PORT_CSC))
+ return -EINVAL;
+
+ /* If we've finished resetting, then break out of the loop */
+ if (!(portsc & PORT_RESET) && (portsc & PORT_PE))
+ return 0;
+ }
+ return -EBUSY;
+}
+
+static int ehci_wait_for_port(int port)
+{
+ u32 status;
+ int ret, reps;
+
+ for (reps = 0; reps < 3; reps++) {
+ dbgp_mdelay(100);
+ status = readl(&ehci_regs->status);
+ if (status & STS_PCD) {
+ ret = ehci_reset_port(port);
+ if (ret == 0)
+ return 0;
+ }
+ }
+ return -ENOTCONN;
+}
+
+#ifdef DBGP_DEBUG
+# define dbgp_printk early_printk
+#else
+static inline void dbgp_printk(const char *fmt, ...) { }
+#endif
+
+typedef void (*set_debug_port_t)(int port);
+
+static void default_set_debug_port(int port)
+{
+}
+
+static set_debug_port_t set_debug_port = default_set_debug_port;
+
+static void nvidia_set_debug_port(int port)
+{
+ u32 dword;
+ dword = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+ 0x74);
+ dword &= ~(0x0f<<12);
+ dword |= ((port & 0x0f)<<12);
+ write_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func, 0x74,
+ dword);
+ dbgp_printk("set debug port to %d\n", port);
+}
+
+static void __init detect_set_debug_port(void)
+{
+ u32 vendorid;
+
+ vendorid = read_pci_config(ehci_dev.bus, ehci_dev.slot, ehci_dev.func,
+ 0x00);
+
+ if ((vendorid & 0xffff) == 0x10de) {
+ dbgp_printk("using nvidia set_debug_port\n");
+ set_debug_port = nvidia_set_debug_port;
+ }
+}
+
+static int __init ehci_setup(void)
+{
+ struct usb_debug_descriptor dbgp_desc;
+ u32 cmd, ctrl, status, portsc, hcs_params;
+ u32 debug_port, new_debug_port = 0, n_ports;
+ u32 devnum;
+ int ret, i;
+ int loop;
+ int port_map_tried;
+ int playtimes = 3;
+
+try_next_time:
+ port_map_tried = 0;
+
+try_next_port:
+
+ hcs_params = readl(&ehci_caps->hcs_params);
+ debug_port = HCS_DEBUG_PORT(hcs_params);
+ n_ports = HCS_N_PORTS(hcs_params);
+
+ dbgp_printk("debug_port: %d\n", debug_port);
+ dbgp_printk("n_ports: %d\n", n_ports);
+
+ for (i = 1; i <= n_ports; i++) {
+ portsc = readl(&ehci_regs->port_status[i-1]);
+ dbgp_printk("portstatus%d: %08x\n", i, portsc);
+ }
+
+ if (port_map_tried && (new_debug_port != debug_port)) {
+ if (--playtimes) {
+ set_debug_port(new_debug_port);
+ goto try_next_time;
+ }
+ return -1;
+ }
+
+ loop = 10;
+ /* Reset the EHCI controller */
+ cmd = readl(&ehci_regs->command);
+ cmd |= CMD_RESET;
+ writel(cmd, &ehci_regs->command);
+ do {
+ cmd = readl(&ehci_regs->command);
+ } while ((cmd & CMD_RESET) && (--loop > 0));
+
+ if (!loop) {
+ dbgp_printk("can not reset ehci\n");
+ return -1;
+ }
+ dbgp_printk("ehci reset done\n");
+
+ /* Claim ownership, but do not enable yet */
+ ctrl = readl(&ehci_debug->control);
+ ctrl |= DBGP_OWNER;
+ ctrl &= ~(DBGP_ENABLED | DBGP_INUSE);
+ writel(ctrl, &ehci_debug->control);
+
+ /* Start the ehci running */
+ cmd = readl(&ehci_regs->command);
+ cmd &= ~(CMD_LRESET | CMD_IAAD | CMD_PSE | CMD_ASE | CMD_RESET);
+ cmd |= CMD_RUN;
+ writel(cmd, &ehci_regs->command);
+
+ /* Ensure everything is routed to the EHCI */
+ writel(FLAG_CF, &ehci_regs->configured_flag);
+
+ /* Wait until the controller is no longer halted */
+ loop = 10;
+ do {
+ status = readl(&ehci_regs->status);
+ } while ((status & STS_HALT) && (--loop > 0));
+
+ if (!loop) {
+ dbgp_printk("ehci can be started\n");
+ return -1;
+ }
+ dbgp_printk("ehci started\n");
+
+ /* Wait for a device to show up in the debug port */
+ ret = ehci_wait_for_port(debug_port);
+ if (ret < 0) {
+ dbgp_printk("No device found in debug port\n");
+ goto next_debug_port;
+ }
+ dbgp_printk("ehci wait for port done\n");
+
+ /* Enable the debug port */
+ ctrl = readl(&ehci_debug->control);
+ ctrl |= DBGP_CLAIM;
+ writel(ctrl, &ehci_debug->control);
+ ctrl = readl(&ehci_debug->control);
+ if ((ctrl & DBGP_CLAIM) != DBGP_CLAIM) {
+ dbgp_printk("No device in debug port\n");
+ writel(ctrl & ~DBGP_CLAIM, &ehci_debug->control);
+ goto err;
+ }
+ dbgp_printk("debug ported enabled\n");
+
+ /* Completely transfer the debug device to the debug controller */
+ portsc = readl(&ehci_regs->port_status[debug_port - 1]);
+ portsc &= ~PORT_PE;
+ writel(portsc, &ehci_regs->port_status[debug_port - 1]);
+
+ dbgp_mdelay(100);
+
+ /* Find the debug device and make it device number 127 */
+ for (devnum = 0; devnum <= 127; devnum++) {
+ ret = dbgp_control_msg(devnum,
+ USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_GET_DESCRIPTOR, (USB_DT_DEBUG << 8), 0,
+ &dbgp_desc, sizeof(dbgp_desc));
+ if (ret > 0)
+ break;
+ }
+ if (devnum > 127) {
+ dbgp_printk("Could not find attached debug device\n");
+ goto err;
+ }
+ if (ret < 0) {
+ dbgp_printk("Attached device is not a debug device\n");
+ goto err;
+ }
+ dbgp_endpoint_out = dbgp_desc.bDebugOutEndpoint;
+
+ /* Move the device to 127 if it isn't already there */
+ if (devnum != USB_DEBUG_DEVNUM) {
+ ret = dbgp_control_msg(devnum,
+ USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0);
+ if (ret < 0) {
+ dbgp_printk("Could not move attached device to %d\n",
+ USB_DEBUG_DEVNUM);
+ goto err;
+ }
+ devnum = USB_DEBUG_DEVNUM;
+ dbgp_printk("debug device renamed to 127\n");
+ }
+
+ /* Enable the debug interface */
+ ret = dbgp_control_msg(USB_DEBUG_DEVNUM,
+ USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE,
+ USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0);
+ if (ret < 0) {
+ dbgp_printk(" Could not enable the debug device\n");
+ goto err;
+ }
+ dbgp_printk("debug interface enabled\n");
+
+ /* Perform a small write to get the even/odd data state in sync
+ */
+ ret = dbgp_bulk_write(USB_DEBUG_DEVNUM, dbgp_endpoint_out, " ", 1);
+ if (ret < 0) {
+ dbgp_printk("dbgp_bulk_write failed: %d\n", ret);
+ goto err;
+ }
+ dbgp_printk("small write doned\n");
+
+ return 0;
+err:
+ /* Things didn't work so remove my claim */
+ ctrl = readl(&ehci_debug->control);
+ ctrl &= ~(DBGP_CLAIM | DBGP_OUT);
+ writel(ctrl, &ehci_debug->control);
+ return -1;
+
+next_debug_port:
+ port_map_tried |= (1<<(debug_port - 1));
+ new_debug_port = ((debug_port-1+1)%n_ports) + 1;
+ if (port_map_tried != ((1<<n_ports) - 1)) {
+ set_debug_port(new_debug_port);
+ goto try_next_port;
+ }
+ if (--playtimes) {
+ set_debug_port(new_debug_port);
+ goto try_next_time;
+ }
+
+ return -1;
+}
+
+static int __init early_dbgp_init(char *s)
+{
+ u32 debug_port, bar, offset;
+ u32 bus, slot, func, cap;
+ void __iomem *ehci_bar;
+ u32 dbgp_num;
+ u32 bar_val;
+ char *e;
+ int ret;
+ u8 byte;
+
+ if (!early_pci_allowed())
+ return -1;
+
+ dbgp_num = 0;
+ if (*s)
+ dbgp_num = simple_strtoul(s, &e, 10);
+ dbgp_printk("dbgp_num: %d\n", dbgp_num);
+
+ cap = find_dbgp(dbgp_num, &bus, &slot, &func);
+ if (!cap)
+ return -1;
+
+ dbgp_printk("Found EHCI debug port on %02x:%02x.%1x\n", bus, slot,
+ func);
+
+ debug_port = read_pci_config(bus, slot, func, cap);
+ bar = (debug_port >> 29) & 0x7;
+ bar = (bar * 4) + 0xc;
+ offset = (debug_port >> 16) & 0xfff;
+ dbgp_printk("bar: %02x offset: %03x\n", bar, offset);
+ if (bar != PCI_BASE_ADDRESS_0) {
+ dbgp_printk("only debug ports on bar 1 handled.\n");
+
+ return -1;
+ }
+
+ bar_val = read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
+ dbgp_printk("bar_val: %02x offset: %03x\n", bar_val, offset);
+ if (bar_val & ~PCI_BASE_ADDRESS_MEM_MASK) {
+ dbgp_printk("only simple 32bit mmio bars supported\n");
+
+ return -1;
+ }
+
+ /* double check if the mem space is enabled */
+ byte = read_pci_config_byte(bus, slot, func, 0x04);
+ if (!(byte & 0x2)) {
+ byte |= 0x02;
+ write_pci_config_byte(bus, slot, func, 0x04, byte);
+ dbgp_printk("mmio for ehci enabled\n");
+ }
+
+ /*
+ * FIXME I don't have the bar size so just guess PAGE_SIZE is more
+ * than enough. 1K is the biggest I have seen.
+ */
+ set_fixmap_nocache(FIX_DBGP_BASE, bar_val & PAGE_MASK);
+ ehci_bar = (void __iomem *)__fix_to_virt(FIX_DBGP_BASE);
+ ehci_bar += bar_val & ~PAGE_MASK;
+ dbgp_printk("ehci_bar: %p\n", ehci_bar);
+
+ ehci_caps = ehci_bar;
+ ehci_regs = ehci_bar + HC_LENGTH(readl(&ehci_caps->hc_capbase));
+ ehci_debug = ehci_bar + offset;
+ ehci_dev.bus = bus;
+ ehci_dev.slot = slot;
+ ehci_dev.func = func;
+
+ detect_set_debug_port();
+
+ ret = ehci_setup();
+ if (ret < 0) {
+ dbgp_printk("ehci_setup failed\n");
+ ehci_debug = NULL;
+
+ return -1;
+ }
+
+ return 0;
+}
+
+static void early_dbgp_write(struct console *con, const char *str, u32 n)
+{
+ int chunk, ret;
+
+ if (!ehci_debug)
+ return;
+ while (n > 0) {
+ chunk = n;
+ if (chunk > DBGP_MAX_PACKET)
+ chunk = DBGP_MAX_PACKET;
+ ret = dbgp_bulk_write(USB_DEBUG_DEVNUM,
+ dbgp_endpoint_out, str, chunk);
+ str += chunk;
+ n -= chunk;
+ }
+}
+
+static struct console early_dbgp_console = {
+ .name = "earlydbg",
+ .write = early_dbgp_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+#endif
+
/* Console interface to a host file on AMD's SimNow! */
static int simnow_fd;
@@ -165,6 +889,7 @@
static noinline long simnow(long cmd, long a, long b, long c)
{
long ret;
+
asm volatile("cpuid" :
"=a" (ret) :
"b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd + MAGIC2));
@@ -174,6 +899,7 @@
static void __init simnow_init(char *str)
{
char *fn = "klog";
+
if (*str == '=')
fn = ++str;
/* error ignored */
@@ -194,7 +920,7 @@
/* Direct interface for emergencies */
static struct console *early_console = &early_vga_console;
-static int early_console_initialized;
+static int __initdata early_console_initialized;
asmlinkage void early_printk(const char *fmt, ...)
{
@@ -208,10 +934,11 @@
va_end(ap);
}
-static int __initdata keep_early;
static int __init setup_early_printk(char *buf)
{
+ int keep_early;
+
if (!buf)
return 0;
@@ -219,8 +946,7 @@
return 0;
early_console_initialized = 1;
- if (strstr(buf, "keep"))
- keep_early = 1;
+ keep_early = (strstr(buf, "keep") != NULL);
if (!strncmp(buf, "serial", 6)) {
early_serial_init(buf + 6);
@@ -238,6 +964,17 @@
simnow_init(buf + 6);
early_console = &simnow_console;
keep_early = 1;
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+ } else if (!strncmp(buf, "dbgp", 4)) {
+ if (early_dbgp_init(buf+4) < 0)
+ return 0;
+ early_console = &early_dbgp_console;
+ /*
+ * usb subsys will reset ehci controller, so don't keep
+ * that early console
+ */
+ keep_early = 0;
+#endif
#ifdef CONFIG_HVC_XEN
} else if (!strncmp(buf, "xen", 3)) {
early_console = &xenboot_console;
@@ -251,4 +988,5 @@
register_console(early_console);
return 0;
}
+
early_param("earlyprintk", setup_early_printk);
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 45723f1..1f20608 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -468,9 +468,23 @@
static int save_i387_xsave(void __user *buf)
{
+ struct task_struct *tsk = current;
struct _fpstate_ia32 __user *fx = buf;
int err = 0;
+ /*
+ * For legacy compatible, we always set FP/SSE bits in the bit
+ * vector while saving the state to the user context.
+ * This will enable us capturing any changes(during sigreturn) to
+ * the FP/SSE bits by the legacy applications which don't touch
+ * xstate_bv in the xsave header.
+ *
+ * xsave aware applications can change the xstate_bv in the xsave
+ * header as well as change any contents in the memory layout.
+ * xrestore as part of sigreturn will capture all the changes.
+ */
+ tsk->thread.xstate->xsave.xsave_hdr.xstate_bv |= XSTATE_FPSSE;
+
if (save_i387_fxsave(fx) < 0)
return -1;
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 0ed5f93..eee32b4 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -52,6 +52,8 @@
memset(newldt + oldsize * LDT_ENTRY_SIZE, 0,
(mincount - oldsize) * LDT_ENTRY_SIZE);
+ paravirt_alloc_ldt(newldt, mincount);
+
#ifdef CONFIG_X86_64
/* CHECKME: Do we really need this ? */
wmb();
@@ -74,6 +76,7 @@
#endif
}
if (oldsize) {
+ paravirt_free_ldt(oldldt, oldsize);
if (oldsize * LDT_ENTRY_SIZE > PAGE_SIZE)
vfree(oldldt);
else
@@ -85,10 +88,13 @@
static inline int copy_ldt(mm_context_t *new, mm_context_t *old)
{
int err = alloc_ldt(new, old->size, 0);
+ int i;
if (err < 0)
return err;
- memcpy(new->ldt, old->ldt, old->size * LDT_ENTRY_SIZE);
+
+ for(i = 0; i < old->size; i++)
+ write_ldt_entry(new->ldt, i, old->ldt + i * LDT_ENTRY_SIZE);
return 0;
}
@@ -125,6 +131,7 @@
if (mm == current->active_mm)
clear_LDT();
#endif
+ paravirt_free_ldt(mm->context.ldt, mm->context.size);
if (mm->context.size * LDT_ENTRY_SIZE > PAGE_SIZE)
vfree(mm->context.ldt);
else
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
deleted file mode 100644
index 652fa5c..0000000
--- a/arch/x86/kernel/microcode.c
+++ /dev/null
@@ -1,853 +0,0 @@
-/*
- * Intel CPU Microcode Update Driver for Linux
- *
- * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
- * 2006 Shaohua Li <shaohua.li@intel.com>
- *
- * This driver allows to upgrade microcode on Intel processors
- * belonging to IA-32 family - PentiumPro, Pentium II,
- * Pentium III, Xeon, Pentium 4, etc.
- *
- * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
- * Software Developer's Manual
- * Order Number 253668 or free download from:
- *
- * http://developer.intel.com/design/pentium4/manuals/253668.htm
- *
- * For more information, go to http://www.urbanmyth.org/microcode
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com>
- * Initial release.
- * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com>
- * Added read() support + cleanups.
- * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com>
- * Added 'device trimming' support. open(O_WRONLY) zeroes
- * and frees the saved copy of applied microcode.
- * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com>
- * Made to use devfs (/dev/cpu/microcode) + cleanups.
- * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com>
- * Added misc device support (now uses both devfs and misc).
- * Added MICROCODE_IOCFREE ioctl to clear memory.
- * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com>
- * Messages for error cases (non Intel & no suitable microcode).
- * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
- * Removed ->release(). Removed exclusive open and status bitmap.
- * Added microcode_rwsem to serialize read()/write()/ioctl().
- * Removed global kernel lock usage.
- * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
- * Write 0 to 0x8B msr and then cpuid before reading revision,
- * so that it works even if there were no update done by the
- * BIOS. Otherwise, reading from 0x8B gives junk (which happened
- * to be 0 on my machine which is why it worked even when I
- * disabled update by the BIOS)
- * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
- * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
- * Tigran Aivazian <tigran@veritas.com>
- * Intel Pentium 4 processor support and bugfixes.
- * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
- * Bugfix for HT (Hyper-Threading) enabled processors
- * whereby processor resources are shared by all logical processors
- * in a single CPU package.
- * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
- * Tigran Aivazian <tigran@veritas.com>,
- * Serialize updates as required on HT processors due to speculative
- * nature of implementation.
- * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
- * Fix the panic when writing zero-length microcode chunk.
- * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
- * Jun Nakajima <jun.nakajima@intel.com>
- * Support for the microcode updates in the new format.
- * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
- * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
- * because we no longer hold a copy of applied microcode
- * in kernel memory.
- * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
- * Fix sigmatch() macro to handle old CPUs with pf == 0.
- * Thanks to Stuart Swales for pointing out this bug.
- */
-
-//#define DEBUG /* pr_debug */
-#include <linux/capability.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/smp_lock.h>
-#include <linux/cpumask.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/miscdevice.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/mutex.h>
-#include <linux/cpu.h>
-#include <linux/firmware.h>
-#include <linux/platform_device.h>
-
-#include <asm/msr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
-
-MODULE_DESCRIPTION("Intel CPU (IA-32) Microcode Update Driver");
-MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
-MODULE_LICENSE("GPL");
-
-#define MICROCODE_VERSION "1.14a"
-
-#define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */
-#define MC_HEADER_SIZE (sizeof (microcode_header_t)) /* 48 bytes */
-#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /* 2048 bytes */
-#define EXT_HEADER_SIZE (sizeof (struct extended_sigtable)) /* 20 bytes */
-#define EXT_SIGNATURE_SIZE (sizeof (struct extended_signature)) /* 12 bytes */
-#define DWSIZE (sizeof (u32))
-#define get_totalsize(mc) \
- (((microcode_t *)mc)->hdr.totalsize ? \
- ((microcode_t *)mc)->hdr.totalsize : DEFAULT_UCODE_TOTALSIZE)
-#define get_datasize(mc) \
- (((microcode_t *)mc)->hdr.datasize ? \
- ((microcode_t *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
-
-#define sigmatch(s1, s2, p1, p2) \
- (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
-
-#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
-
-/* serialize access to the physical write to MSR 0x79 */
-static DEFINE_SPINLOCK(microcode_update_lock);
-
-/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
-static DEFINE_MUTEX(microcode_mutex);
-
-static struct ucode_cpu_info {
- int valid;
- unsigned int sig;
- unsigned int pf;
- unsigned int rev;
- microcode_t *mc;
-} ucode_cpu_info[NR_CPUS];
-
-static void collect_cpu_info(int cpu_num)
-{
- struct cpuinfo_x86 *c = &cpu_data(cpu_num);
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
- unsigned int val[2];
-
- /* We should bind the task to the CPU */
- BUG_ON(raw_smp_processor_id() != cpu_num);
- uci->pf = uci->rev = 0;
- uci->mc = NULL;
- uci->valid = 1;
-
- if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
- cpu_has(c, X86_FEATURE_IA64)) {
- printk(KERN_ERR "microcode: CPU%d not a capable Intel "
- "processor\n", cpu_num);
- uci->valid = 0;
- return;
- }
-
- uci->sig = cpuid_eax(0x00000001);
-
- if ((c->x86_model >= 5) || (c->x86 > 6)) {
- /* get processor flags from MSR 0x17 */
- rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
- uci->pf = 1 << ((val[1] >> 18) & 7);
- }
-
- wrmsr(MSR_IA32_UCODE_REV, 0, 0);
- /* see notes above for revision 1.07. Apparent chip bug */
- sync_core();
- /* get the current revision from MSR 0x8B */
- rdmsr(MSR_IA32_UCODE_REV, val[0], uci->rev);
- pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
- uci->sig, uci->pf, uci->rev);
-}
-
-static inline int microcode_update_match(int cpu_num,
- microcode_header_t *mc_header, int sig, int pf)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-
- if (!sigmatch(sig, uci->sig, pf, uci->pf)
- || mc_header->rev <= uci->rev)
- return 0;
- return 1;
-}
-
-static int microcode_sanity_check(void *mc)
-{
- microcode_header_t *mc_header = mc;
- struct extended_sigtable *ext_header = NULL;
- struct extended_signature *ext_sig;
- unsigned long total_size, data_size, ext_table_size;
- int sum, orig_sum, ext_sigcount = 0, i;
-
- total_size = get_totalsize(mc_header);
- data_size = get_datasize(mc_header);
- if (data_size + MC_HEADER_SIZE > total_size) {
- printk(KERN_ERR "microcode: error! "
- "Bad data size in microcode data file\n");
- return -EINVAL;
- }
-
- if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
- printk(KERN_ERR "microcode: error! "
- "Unknown microcode update format\n");
- return -EINVAL;
- }
- ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
- if (ext_table_size) {
- if ((ext_table_size < EXT_HEADER_SIZE)
- || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
- printk(KERN_ERR "microcode: error! "
- "Small exttable size in microcode data file\n");
- return -EINVAL;
- }
- ext_header = mc + MC_HEADER_SIZE + data_size;
- if (ext_table_size != exttable_size(ext_header)) {
- printk(KERN_ERR "microcode: error! "
- "Bad exttable size in microcode data file\n");
- return -EFAULT;
- }
- ext_sigcount = ext_header->count;
- }
-
- /* check extended table checksum */
- if (ext_table_size) {
- int ext_table_sum = 0;
- int *ext_tablep = (int *)ext_header;
-
- i = ext_table_size / DWSIZE;
- while (i--)
- ext_table_sum += ext_tablep[i];
- if (ext_table_sum) {
- printk(KERN_WARNING "microcode: aborting, "
- "bad extended signature table checksum\n");
- return -EINVAL;
- }
- }
-
- /* calculate the checksum */
- orig_sum = 0;
- i = (MC_HEADER_SIZE + data_size) / DWSIZE;
- while (i--)
- orig_sum += ((int *)mc)[i];
- if (orig_sum) {
- printk(KERN_ERR "microcode: aborting, bad checksum\n");
- return -EINVAL;
- }
- if (!ext_table_size)
- return 0;
- /* check extended signature checksum */
- for (i = 0; i < ext_sigcount; i++) {
- ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
- EXT_SIGNATURE_SIZE * i;
- sum = orig_sum
- - (mc_header->sig + mc_header->pf + mc_header->cksum)
- + (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
- if (sum) {
- printk(KERN_ERR "microcode: aborting, bad checksum\n");
- return -EINVAL;
- }
- }
- return 0;
-}
-
-/*
- * return 0 - no update found
- * return 1 - found update
- * return < 0 - error
- */
-static int get_maching_microcode(void *mc, int cpu)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- microcode_header_t *mc_header = mc;
- struct extended_sigtable *ext_header;
- unsigned long total_size = get_totalsize(mc_header);
- int ext_sigcount, i;
- struct extended_signature *ext_sig;
- void *new_mc;
-
- if (microcode_update_match(cpu, mc_header,
- mc_header->sig, mc_header->pf))
- goto find;
-
- if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
- return 0;
-
- ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
- ext_sigcount = ext_header->count;
- ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
- for (i = 0; i < ext_sigcount; i++) {
- if (microcode_update_match(cpu, mc_header,
- ext_sig->sig, ext_sig->pf))
- goto find;
- ext_sig++;
- }
- return 0;
-find:
- pr_debug("microcode: CPU%d found a matching microcode update with"
- " version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev);
- new_mc = vmalloc(total_size);
- if (!new_mc) {
- printk(KERN_ERR "microcode: error! Can not allocate memory\n");
- return -ENOMEM;
- }
-
- /* free previous update file */
- vfree(uci->mc);
-
- memcpy(new_mc, mc, total_size);
- uci->mc = new_mc;
- return 1;
-}
-
-static void apply_microcode(int cpu)
-{
- unsigned long flags;
- unsigned int val[2];
- int cpu_num = raw_smp_processor_id();
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
-
- /* We should bind the task to the CPU */
- BUG_ON(cpu_num != cpu);
-
- if (uci->mc == NULL)
- return;
-
- /* serialize access to the physical write to MSR 0x79 */
- spin_lock_irqsave(µcode_update_lock, flags);
-
- /* write microcode via MSR 0x79 */
- wrmsr(MSR_IA32_UCODE_WRITE,
- (unsigned long) uci->mc->bits,
- (unsigned long) uci->mc->bits >> 16 >> 16);
- wrmsr(MSR_IA32_UCODE_REV, 0, 0);
-
- /* see notes above for revision 1.07. Apparent chip bug */
- sync_core();
-
- /* get the current revision from MSR 0x8B */
- rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
-
- spin_unlock_irqrestore(µcode_update_lock, flags);
- if (val[1] != uci->mc->hdr.rev) {
- printk(KERN_ERR "microcode: CPU%d update from revision "
- "0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]);
- return;
- }
- printk(KERN_INFO "microcode: CPU%d updated from revision "
- "0x%x to 0x%x, date = %08x \n",
- cpu_num, uci->rev, val[1], uci->mc->hdr.date);
- uci->rev = val[1];
-}
-
-#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-static void __user *user_buffer; /* user area microcode data buffer */
-static unsigned int user_buffer_size; /* it's size */
-
-static long get_next_ucode(void **mc, long offset)
-{
- microcode_header_t mc_header;
- unsigned long total_size;
-
- /* No more data */
- if (offset >= user_buffer_size)
- return 0;
- if (copy_from_user(&mc_header, user_buffer + offset, MC_HEADER_SIZE)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- return -EFAULT;
- }
- total_size = get_totalsize(&mc_header);
- if (offset + total_size > user_buffer_size) {
- printk(KERN_ERR "microcode: error! Bad total size in microcode "
- "data file\n");
- return -EINVAL;
- }
- *mc = vmalloc(total_size);
- if (!*mc)
- return -ENOMEM;
- if (copy_from_user(*mc, user_buffer + offset, total_size)) {
- printk(KERN_ERR "microcode: error! Can not read user data\n");
- vfree(*mc);
- return -EFAULT;
- }
- return offset + total_size;
-}
-
-static int do_microcode_update (void)
-{
- long cursor = 0;
- int error = 0;
- void *new_mc = NULL;
- int cpu;
- cpumask_t old;
-
- old = current->cpus_allowed;
-
- while ((cursor = get_next_ucode(&new_mc, cursor)) > 0) {
- error = microcode_sanity_check(new_mc);
- if (error)
- goto out;
- /*
- * It's possible the data file has multiple matching ucode,
- * lets keep searching till the latest version
- */
- for_each_online_cpu(cpu) {
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
- if (!uci->valid)
- continue;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- error = get_maching_microcode(new_mc, cpu);
- if (error < 0)
- goto out;
- if (error == 1)
- apply_microcode(cpu);
- }
- vfree(new_mc);
- }
-out:
- if (cursor > 0)
- vfree(new_mc);
- if (cursor < 0)
- error = cursor;
- set_cpus_allowed_ptr(current, &old);
- return error;
-}
-
-static int microcode_open (struct inode *unused1, struct file *unused2)
-{
- cycle_kernel_lock();
- return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
-}
-
-static ssize_t microcode_write (struct file *file, const char __user *buf, size_t len, loff_t *ppos)
-{
- ssize_t ret;
-
- if ((len >> PAGE_SHIFT) > num_physpages) {
- printk(KERN_ERR "microcode: too much data (max %ld pages)\n", num_physpages);
- return -EINVAL;
- }
-
- get_online_cpus();
- mutex_lock(µcode_mutex);
-
- user_buffer = (void __user *) buf;
- user_buffer_size = (int) len;
-
- ret = do_microcode_update();
- if (!ret)
- ret = (ssize_t)len;
-
- mutex_unlock(µcode_mutex);
- put_online_cpus();
-
- return ret;
-}
-
-static const struct file_operations microcode_fops = {
- .owner = THIS_MODULE,
- .write = microcode_write,
- .open = microcode_open,
-};
-
-static struct miscdevice microcode_dev = {
- .minor = MICROCODE_MINOR,
- .name = "microcode",
- .fops = µcode_fops,
-};
-
-static int __init microcode_dev_init (void)
-{
- int error;
-
- error = misc_register(µcode_dev);
- if (error) {
- printk(KERN_ERR
- "microcode: can't misc_register on minor=%d\n",
- MICROCODE_MINOR);
- return error;
- }
-
- return 0;
-}
-
-static void microcode_dev_exit (void)
-{
- misc_deregister(µcode_dev);
-}
-
-MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
-#else
-#define microcode_dev_init() 0
-#define microcode_dev_exit() do { } while(0)
-#endif
-
-static long get_next_ucode_from_buffer(void **mc, const u8 *buf,
- unsigned long size, long offset)
-{
- microcode_header_t *mc_header;
- unsigned long total_size;
-
- /* No more data */
- if (offset >= size)
- return 0;
- mc_header = (microcode_header_t *)(buf + offset);
- total_size = get_totalsize(mc_header);
-
- if (offset + total_size > size) {
- printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
- return -EINVAL;
- }
-
- *mc = vmalloc(total_size);
- if (!*mc) {
- printk(KERN_ERR "microcode: error! Can not allocate memory\n");
- return -ENOMEM;
- }
- memcpy(*mc, buf + offset, total_size);
- return offset + total_size;
-}
-
-/* fake device for request_firmware */
-static struct platform_device *microcode_pdev;
-
-static int cpu_request_microcode(int cpu)
-{
- char name[30];
- struct cpuinfo_x86 *c = &cpu_data(cpu);
- const struct firmware *firmware;
- const u8 *buf;
- unsigned long size;
- long offset = 0;
- int error;
- void *mc;
-
- /* We should bind the task to the CPU */
- BUG_ON(cpu != raw_smp_processor_id());
- sprintf(name,"intel-ucode/%02x-%02x-%02x",
- c->x86, c->x86_model, c->x86_mask);
- error = request_firmware(&firmware, name, µcode_pdev->dev);
- if (error) {
- pr_debug("microcode: data file %s load failed\n", name);
- return error;
- }
- buf = firmware->data;
- size = firmware->size;
- while ((offset = get_next_ucode_from_buffer(&mc, buf, size, offset))
- > 0) {
- error = microcode_sanity_check(mc);
- if (error)
- break;
- error = get_maching_microcode(mc, cpu);
- if (error < 0)
- break;
- /*
- * It's possible the data file has multiple matching ucode,
- * lets keep searching till the latest version
- */
- if (error == 1) {
- apply_microcode(cpu);
- error = 0;
- }
- vfree(mc);
- }
- if (offset > 0)
- vfree(mc);
- if (offset < 0)
- error = offset;
- release_firmware(firmware);
-
- return error;
-}
-
-static int apply_microcode_check_cpu(int cpu)
-{
- struct cpuinfo_x86 *c = &cpu_data(cpu);
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- cpumask_t old;
- unsigned int val[2];
- int err = 0;
-
- /* Check if the microcode is available */
- if (!uci->mc)
- return 0;
-
- old = current->cpus_allowed;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-
- /* Check if the microcode we have in memory matches the CPU */
- if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
- cpu_has(c, X86_FEATURE_IA64) || uci->sig != cpuid_eax(0x00000001))
- err = -EINVAL;
-
- if (!err && ((c->x86_model >= 5) || (c->x86 > 6))) {
- /* get processor flags from MSR 0x17 */
- rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
- if (uci->pf != (1 << ((val[1] >> 18) & 7)))
- err = -EINVAL;
- }
-
- if (!err) {
- wrmsr(MSR_IA32_UCODE_REV, 0, 0);
- /* see notes above for revision 1.07. Apparent chip bug */
- sync_core();
- /* get the current revision from MSR 0x8B */
- rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
- if (uci->rev != val[1])
- err = -EINVAL;
- }
-
- if (!err)
- apply_microcode(cpu);
- else
- printk(KERN_ERR "microcode: Could not apply microcode to CPU%d:"
- " sig=0x%x, pf=0x%x, rev=0x%x\n",
- cpu, uci->sig, uci->pf, uci->rev);
-
- set_cpus_allowed_ptr(current, &old);
- return err;
-}
-
-static void microcode_init_cpu(int cpu, int resume)
-{
- cpumask_t old;
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
- old = current->cpus_allowed;
-
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- mutex_lock(µcode_mutex);
- collect_cpu_info(cpu);
- if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
- cpu_request_microcode(cpu);
- mutex_unlock(µcode_mutex);
- set_cpus_allowed_ptr(current, &old);
-}
-
-static void microcode_fini_cpu(int cpu)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
- mutex_lock(µcode_mutex);
- uci->valid = 0;
- vfree(uci->mc);
- uci->mc = NULL;
- mutex_unlock(µcode_mutex);
-}
-
-static ssize_t reload_store(struct sys_device *dev,
- struct sysdev_attribute *attr,
- const char *buf, size_t sz)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
- char *end;
- unsigned long val = simple_strtoul(buf, &end, 0);
- int err = 0;
- int cpu = dev->id;
-
- if (end == buf)
- return -EINVAL;
- if (val == 1) {
- cpumask_t old = current->cpus_allowed;
-
- get_online_cpus();
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
-
- mutex_lock(µcode_mutex);
- if (uci->valid)
- err = cpu_request_microcode(cpu);
- mutex_unlock(µcode_mutex);
- put_online_cpus();
- set_cpus_allowed_ptr(current, &old);
- }
- if (err)
- return err;
- return sz;
-}
-
-static ssize_t version_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
-
- return sprintf(buf, "0x%x\n", uci->rev);
-}
-
-static ssize_t pf_show(struct sys_device *dev,
- struct sysdev_attribute *attr, char *buf)
-{
- struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
-
- return sprintf(buf, "0x%x\n", uci->pf);
-}
-
-static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
-static SYSDEV_ATTR(version, 0400, version_show, NULL);
-static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
-
-static struct attribute *mc_default_attrs[] = {
- &attr_reload.attr,
- &attr_version.attr,
- &attr_processor_flags.attr,
- NULL
-};
-
-static struct attribute_group mc_attr_group = {
- .attrs = mc_default_attrs,
- .name = "microcode",
-};
-
-static int __mc_sysdev_add(struct sys_device *sys_dev, int resume)
-{
- int err, cpu = sys_dev->id;
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
-
- if (!cpu_online(cpu))
- return 0;
-
- pr_debug("microcode: CPU%d added\n", cpu);
- memset(uci, 0, sizeof(*uci));
-
- err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
- if (err)
- return err;
-
- microcode_init_cpu(cpu, resume);
-
- return 0;
-}
-
-static int mc_sysdev_add(struct sys_device *sys_dev)
-{
- return __mc_sysdev_add(sys_dev, 0);
-}
-
-static int mc_sysdev_remove(struct sys_device *sys_dev)
-{
- int cpu = sys_dev->id;
-
- if (!cpu_online(cpu))
- return 0;
-
- pr_debug("microcode: CPU%d removed\n", cpu);
- microcode_fini_cpu(cpu);
- sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
- return 0;
-}
-
-static int mc_sysdev_resume(struct sys_device *dev)
-{
- int cpu = dev->id;
-
- if (!cpu_online(cpu))
- return 0;
- pr_debug("microcode: CPU%d resumed\n", cpu);
- /* only CPU 0 will apply ucode here */
- apply_microcode(0);
- return 0;
-}
-
-static struct sysdev_driver mc_sysdev_driver = {
- .add = mc_sysdev_add,
- .remove = mc_sysdev_remove,
- .resume = mc_sysdev_resume,
-};
-
-static __cpuinit int
-mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
-{
- unsigned int cpu = (unsigned long)hcpu;
- struct sys_device *sys_dev;
-
- sys_dev = get_cpu_sysdev(cpu);
- switch (action) {
- case CPU_UP_CANCELED_FROZEN:
- /* The CPU refused to come up during a system resume */
- microcode_fini_cpu(cpu);
- break;
- case CPU_ONLINE:
- case CPU_DOWN_FAILED:
- mc_sysdev_add(sys_dev);
- break;
- case CPU_ONLINE_FROZEN:
- /* System-wide resume is in progress, try to apply microcode */
- if (apply_microcode_check_cpu(cpu)) {
- /* The application of microcode failed */
- microcode_fini_cpu(cpu);
- __mc_sysdev_add(sys_dev, 1);
- break;
- }
- case CPU_DOWN_FAILED_FROZEN:
- if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
- printk(KERN_ERR "microcode: Failed to create the sysfs "
- "group for CPU%d\n", cpu);
- break;
- case CPU_DOWN_PREPARE:
- mc_sysdev_remove(sys_dev);
- break;
- case CPU_DOWN_PREPARE_FROZEN:
- /* Suspend is in progress, only remove the interface */
- sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
- break;
- }
- return NOTIFY_OK;
-}
-
-static struct notifier_block __refdata mc_cpu_notifier = {
- .notifier_call = mc_cpu_callback,
-};
-
-static int __init microcode_init (void)
-{
- int error;
-
- printk(KERN_INFO
- "IA-32 Microcode Update Driver: v" MICROCODE_VERSION " <tigran@aivazian.fsnet.co.uk>\n");
-
- error = microcode_dev_init();
- if (error)
- return error;
- microcode_pdev = platform_device_register_simple("microcode", -1,
- NULL, 0);
- if (IS_ERR(microcode_pdev)) {
- microcode_dev_exit();
- return PTR_ERR(microcode_pdev);
- }
-
- get_online_cpus();
- error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
- put_online_cpus();
- if (error) {
- microcode_dev_exit();
- platform_device_unregister(microcode_pdev);
- return error;
- }
-
- register_hotcpu_notifier(&mc_cpu_notifier);
- return 0;
-}
-
-static void __exit microcode_exit (void)
-{
- microcode_dev_exit();
-
- unregister_hotcpu_notifier(&mc_cpu_notifier);
-
- get_online_cpus();
- sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
- put_online_cpus();
-
- platform_device_unregister(microcode_pdev);
-}
-
-module_init(microcode_init)
-module_exit(microcode_exit)
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
new file mode 100644
index 0000000..7a1f8ee
--- /dev/null
+++ b/arch/x86/kernel/microcode_amd.c
@@ -0,0 +1,435 @@
+/*
+ * AMD CPU Microcode Update Driver for Linux
+ * Copyright (C) 2008 Advanced Micro Devices Inc.
+ *
+ * Author: Peter Oruba <peter.oruba@amd.com>
+ *
+ * Based on work by:
+ * Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
+ *
+ * This driver allows to upgrade microcode on AMD
+ * family 0x10 and 0x11 processors.
+ *
+ * Licensed unter the terms of the GNU General Public
+ * License version 2. See file COPYING for details.
+*/
+
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("AMD Microcode Update Driver");
+MODULE_AUTHOR("Peter Oruba <peter.oruba@amd.com>");
+MODULE_LICENSE("GPL v2");
+
+#define UCODE_MAGIC 0x00414d44
+#define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
+#define UCODE_UCODE_TYPE 0x00000001
+
+struct equiv_cpu_entry {
+ unsigned int installed_cpu;
+ unsigned int fixed_errata_mask;
+ unsigned int fixed_errata_compare;
+ unsigned int equiv_cpu;
+};
+
+struct microcode_header_amd {
+ unsigned int data_code;
+ unsigned int patch_id;
+ unsigned char mc_patch_data_id[2];
+ unsigned char mc_patch_data_len;
+ unsigned char init_flag;
+ unsigned int mc_patch_data_checksum;
+ unsigned int nb_dev_id;
+ unsigned int sb_dev_id;
+ unsigned char processor_rev_id[2];
+ unsigned char nb_rev_id;
+ unsigned char sb_rev_id;
+ unsigned char bios_api_rev;
+ unsigned char reserved1[3];
+ unsigned int match_reg[8];
+};
+
+struct microcode_amd {
+ struct microcode_header_amd hdr;
+ unsigned int mpb[0];
+};
+
+#define UCODE_MAX_SIZE (2048)
+#define DEFAULT_UCODE_DATASIZE (896)
+#define MC_HEADER_SIZE (sizeof(struct microcode_header_amd))
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define DWSIZE (sizeof(u32))
+/* For now we support a fixed ucode total size only */
+#define get_totalsize(mc) \
+ ((((struct microcode_amd *)mc)->hdr.mc_patch_data_len * 28) \
+ + MC_HEADER_SIZE)
+
+/* serialize access to the physical write */
+static DEFINE_SPINLOCK(microcode_update_lock);
+
+static struct equiv_cpu_entry *equiv_cpu_table;
+
+static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
+{
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+ memset(csig, 0, sizeof(*csig));
+
+ if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+ printk(KERN_ERR "microcode: CPU%d not a capable AMD processor\n",
+ cpu);
+ return -1;
+ }
+
+ asm volatile("movl %1, %%ecx; rdmsr"
+ : "=a" (csig->rev)
+ : "i" (0x0000008B) : "ecx");
+
+ printk(KERN_INFO "microcode: collect_cpu_info_amd : patch_id=0x%x\n",
+ csig->rev);
+
+ return 0;
+}
+
+static int get_matching_microcode(int cpu, void *mc, int rev)
+{
+ struct microcode_header_amd *mc_header = mc;
+ struct pci_dev *nb_pci_dev, *sb_pci_dev;
+ unsigned int current_cpu_id;
+ unsigned int equiv_cpu_id = 0x00;
+ unsigned int i = 0;
+
+ BUG_ON(equiv_cpu_table == NULL);
+ current_cpu_id = cpuid_eax(0x00000001);
+
+ while (equiv_cpu_table[i].installed_cpu != 0) {
+ if (current_cpu_id == equiv_cpu_table[i].installed_cpu) {
+ equiv_cpu_id = equiv_cpu_table[i].equiv_cpu;
+ break;
+ }
+ i++;
+ }
+
+ if (!equiv_cpu_id) {
+ printk(KERN_ERR "microcode: CPU%d cpu_id "
+ "not found in equivalent cpu table \n", cpu);
+ return 0;
+ }
+
+ if ((mc_header->processor_rev_id[0]) != (equiv_cpu_id & 0xff)) {
+ printk(KERN_ERR
+ "microcode: CPU%d patch does not match "
+ "(patch is %x, cpu extended is %x) \n",
+ cpu, mc_header->processor_rev_id[0],
+ (equiv_cpu_id & 0xff));
+ return 0;
+ }
+
+ if ((mc_header->processor_rev_id[1]) != ((equiv_cpu_id >> 16) & 0xff)) {
+ printk(KERN_ERR "microcode: CPU%d patch does not match "
+ "(patch is %x, cpu base id is %x) \n",
+ cpu, mc_header->processor_rev_id[1],
+ ((equiv_cpu_id >> 16) & 0xff));
+
+ return 0;
+ }
+
+ /* ucode may be northbridge specific */
+ if (mc_header->nb_dev_id) {
+ nb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ (mc_header->nb_dev_id & 0xff),
+ NULL);
+ if ((!nb_pci_dev) ||
+ (mc_header->nb_rev_id != nb_pci_dev->revision)) {
+ printk(KERN_ERR "microcode: CPU%d NB mismatch \n", cpu);
+ pci_dev_put(nb_pci_dev);
+ return 0;
+ }
+ pci_dev_put(nb_pci_dev);
+ }
+
+ /* ucode may be southbridge specific */
+ if (mc_header->sb_dev_id) {
+ sb_pci_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ (mc_header->sb_dev_id & 0xff),
+ NULL);
+ if ((!sb_pci_dev) ||
+ (mc_header->sb_rev_id != sb_pci_dev->revision)) {
+ printk(KERN_ERR "microcode: CPU%d SB mismatch \n", cpu);
+ pci_dev_put(sb_pci_dev);
+ return 0;
+ }
+ pci_dev_put(sb_pci_dev);
+ }
+
+ if (mc_header->patch_id <= rev)
+ return 0;
+
+ return 1;
+}
+
+static void apply_microcode_amd(int cpu)
+{
+ unsigned long flags;
+ unsigned int eax, edx;
+ unsigned int rev;
+ int cpu_num = raw_smp_processor_id();
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
+ struct microcode_amd *mc_amd = uci->mc;
+ unsigned long addr;
+
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu_num != cpu);
+
+ if (mc_amd == NULL)
+ return;
+
+ spin_lock_irqsave(µcode_update_lock, flags);
+
+ addr = (unsigned long)&mc_amd->hdr.data_code;
+ edx = (unsigned int)(((unsigned long)upper_32_bits(addr)));
+ eax = (unsigned int)(((unsigned long)lower_32_bits(addr)));
+
+ asm volatile("movl %0, %%ecx; wrmsr" :
+ : "i" (0xc0010020), "a" (eax), "d" (edx) : "ecx");
+
+ /* get patch id after patching */
+ asm volatile("movl %1, %%ecx; rdmsr"
+ : "=a" (rev)
+ : "i" (0x0000008B) : "ecx");
+
+ spin_unlock_irqrestore(µcode_update_lock, flags);
+
+ /* check current patch id and patch's id for match */
+ if (rev != mc_amd->hdr.patch_id) {
+ printk(KERN_ERR "microcode: CPU%d update from revision "
+ "0x%x to 0x%x failed\n", cpu_num,
+ mc_amd->hdr.patch_id, rev);
+ return;
+ }
+
+ printk(KERN_INFO "microcode: CPU%d updated from revision "
+ "0x%x to 0x%x \n",
+ cpu_num, uci->cpu_sig.rev, mc_amd->hdr.patch_id);
+
+ uci->cpu_sig.rev = rev;
+}
+
+static void * get_next_ucode(u8 *buf, unsigned int size,
+ int (*get_ucode_data)(void *, const void *, size_t),
+ unsigned int *mc_size)
+{
+ unsigned int total_size;
+#define UCODE_CONTAINER_SECTION_HDR 8
+ u8 section_hdr[UCODE_CONTAINER_SECTION_HDR];
+ void *mc;
+
+ if (get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR))
+ return NULL;
+
+ if (section_hdr[0] != UCODE_UCODE_TYPE) {
+ printk(KERN_ERR "microcode: error! "
+ "Wrong microcode payload type field\n");
+ return NULL;
+ }
+
+ total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8));
+
+ printk(KERN_INFO "microcode: size %u, total_size %u\n",
+ size, total_size);
+
+ if (total_size > size || total_size > UCODE_MAX_SIZE) {
+ printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+ return NULL;
+ }
+
+ mc = vmalloc(UCODE_MAX_SIZE);
+ if (mc) {
+ memset(mc, 0, UCODE_MAX_SIZE);
+ if (get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, total_size)) {
+ vfree(mc);
+ mc = NULL;
+ } else
+ *mc_size = total_size + UCODE_CONTAINER_SECTION_HDR;
+ }
+#undef UCODE_CONTAINER_SECTION_HDR
+ return mc;
+}
+
+
+static int install_equiv_cpu_table(u8 *buf,
+ int (*get_ucode_data)(void *, const void *, size_t))
+{
+#define UCODE_CONTAINER_HEADER_SIZE 12
+ u8 *container_hdr[UCODE_CONTAINER_HEADER_SIZE];
+ unsigned int *buf_pos = (unsigned int *)container_hdr;
+ unsigned long size;
+
+ if (get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE))
+ return 0;
+
+ size = buf_pos[2];
+
+ if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) {
+ printk(KERN_ERR "microcode: error! "
+ "Wrong microcode equivalnet cpu table\n");
+ return 0;
+ }
+
+ equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
+ if (!equiv_cpu_table) {
+ printk(KERN_ERR "microcode: error, can't allocate memory for equiv CPU table\n");
+ return 0;
+ }
+
+ buf += UCODE_CONTAINER_HEADER_SIZE;
+ if (get_ucode_data(equiv_cpu_table, buf, size)) {
+ vfree(equiv_cpu_table);
+ return 0;
+ }
+
+ return size + UCODE_CONTAINER_HEADER_SIZE; /* add header length */
+#undef UCODE_CONTAINER_HEADER_SIZE
+}
+
+static void free_equiv_cpu_table(void)
+{
+ if (equiv_cpu_table) {
+ vfree(equiv_cpu_table);
+ equiv_cpu_table = NULL;
+ }
+}
+
+static int generic_load_microcode(int cpu, void *data, size_t size,
+ int (*get_ucode_data)(void *, const void *, size_t))
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+ int new_rev = uci->cpu_sig.rev;
+ unsigned int leftover;
+ unsigned long offset;
+
+ offset = install_equiv_cpu_table(ucode_ptr, get_ucode_data);
+ if (!offset) {
+ printk(KERN_ERR "microcode: installing equivalent cpu table failed\n");
+ return -EINVAL;
+ }
+
+ ucode_ptr += offset;
+ leftover = size - offset;
+
+ while (leftover) {
+ unsigned int uninitialized_var(mc_size);
+ struct microcode_header_amd *mc_header;
+
+ mc = get_next_ucode(ucode_ptr, leftover, get_ucode_data, &mc_size);
+ if (!mc)
+ break;
+
+ mc_header = (struct microcode_header_amd *)mc;
+ if (get_matching_microcode(cpu, mc, new_rev)) {
+ if (new_mc)
+ vfree(new_mc);
+ new_rev = mc_header->patch_id;
+ new_mc = mc;
+ } else
+ vfree(mc);
+
+ ucode_ptr += mc_size;
+ leftover -= mc_size;
+ }
+
+ if (new_mc) {
+ if (!leftover) {
+ if (uci->mc)
+ vfree(uci->mc);
+ uci->mc = new_mc;
+ pr_debug("microcode: CPU%d found a matching microcode update with"
+ " version 0x%x (current=0x%x)\n",
+ cpu, new_rev, uci->cpu_sig.rev);
+ } else
+ vfree(new_mc);
+ }
+
+ free_equiv_cpu_table();
+
+ return (int)leftover;
+}
+
+static int get_ucode_fw(void *to, const void *from, size_t n)
+{
+ memcpy(to, from, n);
+ return 0;
+}
+
+static int request_microcode_fw(int cpu, struct device *device)
+{
+ const char *fw_name = "amd-ucode/microcode_amd.bin";
+ const struct firmware *firmware;
+ int ret;
+
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu != raw_smp_processor_id());
+
+ ret = request_firmware(&firmware, fw_name, device);
+ if (ret) {
+ printk(KERN_ERR "microcode: ucode data file %s load failed\n", fw_name);
+ return ret;
+ }
+
+ ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
+ &get_ucode_fw);
+
+ release_firmware(firmware);
+
+ return ret;
+}
+
+static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+ printk(KERN_WARNING "microcode: AMD microcode update via /dev/cpu/microcode"
+ "is not supported\n");
+ return -1;
+}
+
+static void microcode_fini_cpu_amd(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ vfree(uci->mc);
+ uci->mc = NULL;
+}
+
+static struct microcode_ops microcode_amd_ops = {
+ .request_microcode_user = request_microcode_user,
+ .request_microcode_fw = request_microcode_fw,
+ .collect_cpu_info = collect_cpu_info_amd,
+ .apply_microcode = apply_microcode_amd,
+ .microcode_fini_cpu = microcode_fini_cpu_amd,
+};
+
+struct microcode_ops * __init init_amd_microcode(void)
+{
+ return µcode_amd_ops;
+}
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
new file mode 100644
index 0000000..936d8d5
--- /dev/null
+++ b/arch/x86/kernel/microcode_core.c
@@ -0,0 +1,508 @@
+/*
+ * Intel CPU Microcode Update Driver for Linux
+ *
+ * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
+ * 2006 Shaohua Li <shaohua.li@intel.com>
+ *
+ * This driver allows to upgrade microcode on Intel processors
+ * belonging to IA-32 family - PentiumPro, Pentium II,
+ * Pentium III, Xeon, Pentium 4, etc.
+ *
+ * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ * Software Developer's Manual
+ * Order Number 253668 or free download from:
+ *
+ * http://developer.intel.com/design/pentium4/manuals/253668.htm
+ *
+ * For more information, go to http://www.urbanmyth.org/microcode
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Initial release.
+ * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Added read() support + cleanups.
+ * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Added 'device trimming' support. open(O_WRONLY) zeroes
+ * and frees the saved copy of applied microcode.
+ * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Made to use devfs (/dev/cpu/microcode) + cleanups.
+ * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com>
+ * Added misc device support (now uses both devfs and misc).
+ * Added MICROCODE_IOCFREE ioctl to clear memory.
+ * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com>
+ * Messages for error cases (non Intel & no suitable microcode).
+ * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
+ * Removed ->release(). Removed exclusive open and status bitmap.
+ * Added microcode_rwsem to serialize read()/write()/ioctl().
+ * Removed global kernel lock usage.
+ * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
+ * Write 0 to 0x8B msr and then cpuid before reading revision,
+ * so that it works even if there were no update done by the
+ * BIOS. Otherwise, reading from 0x8B gives junk (which happened
+ * to be 0 on my machine which is why it worked even when I
+ * disabled update by the BIOS)
+ * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
+ * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
+ * Tigran Aivazian <tigran@veritas.com>
+ * Intel Pentium 4 processor support and bugfixes.
+ * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
+ * Bugfix for HT (Hyper-Threading) enabled processors
+ * whereby processor resources are shared by all logical processors
+ * in a single CPU package.
+ * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
+ * Tigran Aivazian <tigran@veritas.com>,
+ * Serialize updates as required on HT processors due to
+ * speculative nature of implementation.
+ * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
+ * Fix the panic when writing zero-length microcode chunk.
+ * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
+ * Jun Nakajima <jun.nakajima@intel.com>
+ * Support for the microcode updates in the new format.
+ * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
+ * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
+ * because we no longer hold a copy of applied microcode
+ * in kernel memory.
+ * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
+ * Fix sigmatch() macro to handle old CPUs with pf == 0.
+ * Thanks to Stuart Swales for pointing out this bug.
+ */
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("Microcode Update Driver");
+MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
+MODULE_LICENSE("GPL");
+
+#define MICROCODE_VERSION "2.00"
+
+struct microcode_ops *microcode_ops;
+
+/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
+static DEFINE_MUTEX(microcode_mutex);
+
+struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
+EXPORT_SYMBOL_GPL(ucode_cpu_info);
+
+#ifdef CONFIG_MICROCODE_OLD_INTERFACE
+static int do_microcode_update(const void __user *buf, size_t size)
+{
+ cpumask_t old;
+ int error = 0;
+ int cpu;
+
+ old = current->cpus_allowed;
+
+ for_each_online_cpu(cpu) {
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ if (!uci->valid)
+ continue;
+
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ error = microcode_ops->request_microcode_user(cpu, buf, size);
+ if (error < 0)
+ goto out;
+ if (!error)
+ microcode_ops->apply_microcode(cpu);
+ }
+out:
+ set_cpus_allowed_ptr(current, &old);
+ return error;
+}
+
+static int microcode_open(struct inode *unused1, struct file *unused2)
+{
+ cycle_kernel_lock();
+ return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
+}
+
+static ssize_t microcode_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ ssize_t ret;
+
+ if ((len >> PAGE_SHIFT) > num_physpages) {
+ printk(KERN_ERR "microcode: too much data (max %ld pages)\n",
+ num_physpages);
+ return -EINVAL;
+ }
+
+ get_online_cpus();
+ mutex_lock(µcode_mutex);
+
+ ret = do_microcode_update(buf, len);
+ if (!ret)
+ ret = (ssize_t)len;
+
+ mutex_unlock(µcode_mutex);
+ put_online_cpus();
+
+ return ret;
+}
+
+static const struct file_operations microcode_fops = {
+ .owner = THIS_MODULE,
+ .write = microcode_write,
+ .open = microcode_open,
+};
+
+static struct miscdevice microcode_dev = {
+ .minor = MICROCODE_MINOR,
+ .name = "microcode",
+ .fops = µcode_fops,
+};
+
+static int __init microcode_dev_init(void)
+{
+ int error;
+
+ error = misc_register(µcode_dev);
+ if (error) {
+ printk(KERN_ERR
+ "microcode: can't misc_register on minor=%d\n",
+ MICROCODE_MINOR);
+ return error;
+ }
+
+ return 0;
+}
+
+static void microcode_dev_exit(void)
+{
+ misc_deregister(µcode_dev);
+}
+
+MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
+#else
+#define microcode_dev_init() 0
+#define microcode_dev_exit() do { } while (0)
+#endif
+
+/* fake device for request_firmware */
+struct platform_device *microcode_pdev;
+
+static ssize_t reload_store(struct sys_device *dev,
+ struct sysdev_attribute *attr,
+ const char *buf, size_t sz)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+ char *end;
+ unsigned long val = simple_strtoul(buf, &end, 0);
+ int err = 0;
+ int cpu = dev->id;
+
+ if (end == buf)
+ return -EINVAL;
+ if (val == 1) {
+ cpumask_t old = current->cpus_allowed;
+
+ get_online_cpus();
+ if (cpu_online(cpu)) {
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ mutex_lock(µcode_mutex);
+ if (uci->valid) {
+ err = microcode_ops->request_microcode_fw(cpu,
+ µcode_pdev->dev);
+ if (!err)
+ microcode_ops->apply_microcode(cpu);
+ }
+ mutex_unlock(µcode_mutex);
+ set_cpus_allowed_ptr(current, &old);
+ }
+ put_online_cpus();
+ }
+ if (err)
+ return err;
+ return sz;
+}
+
+static ssize_t version_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+
+ return sprintf(buf, "0x%x\n", uci->cpu_sig.rev);
+}
+
+static ssize_t pf_show(struct sys_device *dev,
+ struct sysdev_attribute *attr, char *buf)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
+
+ return sprintf(buf, "0x%x\n", uci->cpu_sig.pf);
+}
+
+static SYSDEV_ATTR(reload, 0200, NULL, reload_store);
+static SYSDEV_ATTR(version, 0400, version_show, NULL);
+static SYSDEV_ATTR(processor_flags, 0400, pf_show, NULL);
+
+static struct attribute *mc_default_attrs[] = {
+ &attr_reload.attr,
+ &attr_version.attr,
+ &attr_processor_flags.attr,
+ NULL
+};
+
+static struct attribute_group mc_attr_group = {
+ .attrs = mc_default_attrs,
+ .name = "microcode",
+};
+
+static void microcode_fini_cpu(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ mutex_lock(µcode_mutex);
+ microcode_ops->microcode_fini_cpu(cpu);
+ uci->valid = 0;
+ mutex_unlock(µcode_mutex);
+}
+
+static void collect_cpu_info(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ memset(uci, 0, sizeof(*uci));
+ if (!microcode_ops->collect_cpu_info(cpu, &uci->cpu_sig))
+ uci->valid = 1;
+}
+
+static int microcode_resume_cpu(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ struct cpu_signature nsig;
+
+ pr_debug("microcode: CPU%d resumed\n", cpu);
+
+ if (!uci->mc)
+ return 1;
+
+ /*
+ * Let's verify that the 'cached' ucode does belong
+ * to this cpu (a bit of paranoia):
+ */
+ if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
+ microcode_fini_cpu(cpu);
+ return -1;
+ }
+
+ if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
+ microcode_fini_cpu(cpu);
+ /* Should we look for a new ucode here? */
+ return 1;
+ }
+
+ return 0;
+}
+
+void microcode_update_cpu(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ int err = 0;
+
+ /*
+ * Check if the system resume is in progress (uci->valid != NULL),
+ * otherwise just request a firmware:
+ */
+ if (uci->valid) {
+ err = microcode_resume_cpu(cpu);
+ } else {
+ collect_cpu_info(cpu);
+ if (uci->valid && system_state == SYSTEM_RUNNING)
+ err = microcode_ops->request_microcode_fw(cpu,
+ µcode_pdev->dev);
+ }
+ if (!err)
+ microcode_ops->apply_microcode(cpu);
+}
+
+static void microcode_init_cpu(int cpu)
+{
+ cpumask_t old = current->cpus_allowed;
+
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ /* We should bind the task to the CPU */
+ BUG_ON(raw_smp_processor_id() != cpu);
+
+ mutex_lock(µcode_mutex);
+ microcode_update_cpu(cpu);
+ mutex_unlock(µcode_mutex);
+
+ set_cpus_allowed_ptr(current, &old);
+}
+
+static int mc_sysdev_add(struct sys_device *sys_dev)
+{
+ int err, cpu = sys_dev->id;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ if (!cpu_online(cpu))
+ return 0;
+
+ pr_debug("microcode: CPU%d added\n", cpu);
+ memset(uci, 0, sizeof(*uci));
+
+ err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
+ if (err)
+ return err;
+
+ microcode_init_cpu(cpu);
+ return 0;
+}
+
+static int mc_sysdev_remove(struct sys_device *sys_dev)
+{
+ int cpu = sys_dev->id;
+
+ if (!cpu_online(cpu))
+ return 0;
+
+ pr_debug("microcode: CPU%d removed\n", cpu);
+ microcode_fini_cpu(cpu);
+ sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+ return 0;
+}
+
+static int mc_sysdev_resume(struct sys_device *dev)
+{
+ int cpu = dev->id;
+
+ if (!cpu_online(cpu))
+ return 0;
+
+ /* only CPU 0 will apply ucode here */
+ microcode_update_cpu(0);
+ return 0;
+}
+
+static struct sysdev_driver mc_sysdev_driver = {
+ .add = mc_sysdev_add,
+ .remove = mc_sysdev_remove,
+ .resume = mc_sysdev_resume,
+};
+
+static __cpuinit int
+mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ microcode_init_cpu(cpu);
+ case CPU_DOWN_FAILED:
+ case CPU_DOWN_FAILED_FROZEN:
+ pr_debug("microcode: CPU%d added\n", cpu);
+ if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
+ printk(KERN_ERR "microcode: Failed to create the sysfs "
+ "group for CPU%d\n", cpu);
+ break;
+ case CPU_DOWN_PREPARE:
+ case CPU_DOWN_PREPARE_FROZEN:
+ /* Suspend is in progress, only remove the interface */
+ sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
+ pr_debug("microcode: CPU%d removed\n", cpu);
+ break;
+ case CPU_DEAD:
+ case CPU_UP_CANCELED_FROZEN:
+ /* The CPU refused to come up during a system resume */
+ microcode_fini_cpu(cpu);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __refdata mc_cpu_notifier = {
+ .notifier_call = mc_cpu_callback,
+};
+
+static int __init microcode_init(void)
+{
+ struct cpuinfo_x86 *c = &cpu_data(0);
+ int error;
+
+ if (c->x86_vendor == X86_VENDOR_INTEL)
+ microcode_ops = init_intel_microcode();
+ else if (c->x86_vendor == X86_VENDOR_AMD)
+ microcode_ops = init_amd_microcode();
+
+ if (!microcode_ops) {
+ printk(KERN_ERR "microcode: no support for this CPU vendor\n");
+ return -ENODEV;
+ }
+
+ error = microcode_dev_init();
+ if (error)
+ return error;
+ microcode_pdev = platform_device_register_simple("microcode", -1,
+ NULL, 0);
+ if (IS_ERR(microcode_pdev)) {
+ microcode_dev_exit();
+ return PTR_ERR(microcode_pdev);
+ }
+
+ get_online_cpus();
+ error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
+ put_online_cpus();
+ if (error) {
+ microcode_dev_exit();
+ platform_device_unregister(microcode_pdev);
+ return error;
+ }
+
+ register_hotcpu_notifier(&mc_cpu_notifier);
+
+ printk(KERN_INFO
+ "Microcode Update Driver: v" MICROCODE_VERSION
+ " <tigran@aivazian.fsnet.co.uk>"
+ " <peter.oruba@amd.com>\n");
+
+ return 0;
+}
+
+static void __exit microcode_exit(void)
+{
+ microcode_dev_exit();
+
+ unregister_hotcpu_notifier(&mc_cpu_notifier);
+
+ get_online_cpus();
+ sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
+ put_online_cpus();
+
+ platform_device_unregister(microcode_pdev);
+
+ microcode_ops = NULL;
+
+ printk(KERN_INFO
+ "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
+}
+
+module_init(microcode_init);
+module_exit(microcode_exit);
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
new file mode 100644
index 0000000..622dc4a
--- /dev/null
+++ b/arch/x86/kernel/microcode_intel.c
@@ -0,0 +1,480 @@
+/*
+ * Intel CPU Microcode Update Driver for Linux
+ *
+ * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
+ * 2006 Shaohua Li <shaohua.li@intel.com>
+ *
+ * This driver allows to upgrade microcode on Intel processors
+ * belonging to IA-32 family - PentiumPro, Pentium II,
+ * Pentium III, Xeon, Pentium 4, etc.
+ *
+ * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
+ * Software Developer's Manual
+ * Order Number 253668 or free download from:
+ *
+ * http://developer.intel.com/design/pentium4/manuals/253668.htm
+ *
+ * For more information, go to http://www.urbanmyth.org/microcode
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Initial release.
+ * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Added read() support + cleanups.
+ * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Added 'device trimming' support. open(O_WRONLY) zeroes
+ * and frees the saved copy of applied microcode.
+ * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com>
+ * Made to use devfs (/dev/cpu/microcode) + cleanups.
+ * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com>
+ * Added misc device support (now uses both devfs and misc).
+ * Added MICROCODE_IOCFREE ioctl to clear memory.
+ * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com>
+ * Messages for error cases (non Intel & no suitable microcode).
+ * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
+ * Removed ->release(). Removed exclusive open and status bitmap.
+ * Added microcode_rwsem to serialize read()/write()/ioctl().
+ * Removed global kernel lock usage.
+ * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
+ * Write 0 to 0x8B msr and then cpuid before reading revision,
+ * so that it works even if there were no update done by the
+ * BIOS. Otherwise, reading from 0x8B gives junk (which happened
+ * to be 0 on my machine which is why it worked even when I
+ * disabled update by the BIOS)
+ * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
+ * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
+ * Tigran Aivazian <tigran@veritas.com>
+ * Intel Pentium 4 processor support and bugfixes.
+ * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
+ * Bugfix for HT (Hyper-Threading) enabled processors
+ * whereby processor resources are shared by all logical processors
+ * in a single CPU package.
+ * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
+ * Tigran Aivazian <tigran@veritas.com>,
+ * Serialize updates as required on HT processors due to
+ * speculative nature of implementation.
+ * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
+ * Fix the panic when writing zero-length microcode chunk.
+ * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
+ * Jun Nakajima <jun.nakajima@intel.com>
+ * Support for the microcode updates in the new format.
+ * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
+ * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
+ * because we no longer hold a copy of applied microcode
+ * in kernel memory.
+ * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
+ * Fix sigmatch() macro to handle old CPUs with pf == 0.
+ * Thanks to Stuart Swales for pointing out this bug.
+ */
+#include <linux/capability.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/miscdevice.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+#include <linux/firmware.h>
+#include <linux/platform_device.h>
+
+#include <asm/msr.h>
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/microcode.h>
+
+MODULE_DESCRIPTION("Microcode Update Driver");
+MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
+MODULE_LICENSE("GPL");
+
+struct microcode_header_intel {
+ unsigned int hdrver;
+ unsigned int rev;
+ unsigned int date;
+ unsigned int sig;
+ unsigned int cksum;
+ unsigned int ldrver;
+ unsigned int pf;
+ unsigned int datasize;
+ unsigned int totalsize;
+ unsigned int reserved[3];
+};
+
+struct microcode_intel {
+ struct microcode_header_intel hdr;
+ unsigned int bits[0];
+};
+
+/* microcode format is extended from prescott processors */
+struct extended_signature {
+ unsigned int sig;
+ unsigned int pf;
+ unsigned int cksum;
+};
+
+struct extended_sigtable {
+ unsigned int count;
+ unsigned int cksum;
+ unsigned int reserved[3];
+ struct extended_signature sigs[0];
+};
+
+#define DEFAULT_UCODE_DATASIZE (2000)
+#define MC_HEADER_SIZE (sizeof(struct microcode_header_intel))
+#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
+#define EXT_HEADER_SIZE (sizeof(struct extended_sigtable))
+#define EXT_SIGNATURE_SIZE (sizeof(struct extended_signature))
+#define DWSIZE (sizeof(u32))
+#define get_totalsize(mc) \
+ (((struct microcode_intel *)mc)->hdr.totalsize ? \
+ ((struct microcode_intel *)mc)->hdr.totalsize : \
+ DEFAULT_UCODE_TOTALSIZE)
+
+#define get_datasize(mc) \
+ (((struct microcode_intel *)mc)->hdr.datasize ? \
+ ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
+
+#define sigmatch(s1, s2, p1, p2) \
+ (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
+
+#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
+
+/* serialize access to the physical write to MSR 0x79 */
+static DEFINE_SPINLOCK(microcode_update_lock);
+
+static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
+{
+ struct cpuinfo_x86 *c = &cpu_data(cpu_num);
+ unsigned int val[2];
+
+ memset(csig, 0, sizeof(*csig));
+
+ if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
+ cpu_has(c, X86_FEATURE_IA64)) {
+ printk(KERN_ERR "microcode: CPU%d not a capable Intel "
+ "processor\n", cpu_num);
+ return -1;
+ }
+
+ csig->sig = cpuid_eax(0x00000001);
+
+ if ((c->x86_model >= 5) || (c->x86 > 6)) {
+ /* get processor flags from MSR 0x17 */
+ rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
+ csig->pf = 1 << ((val[1] >> 18) & 7);
+ }
+
+ wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+ /* see notes above for revision 1.07. Apparent chip bug */
+ sync_core();
+ /* get the current revision from MSR 0x8B */
+ rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
+ pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
+ csig->sig, csig->pf, csig->rev);
+
+ return 0;
+}
+
+static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf)
+{
+ return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1;
+}
+
+static inline int
+update_match_revision(struct microcode_header_intel *mc_header, int rev)
+{
+ return (mc_header->rev <= rev) ? 0 : 1;
+}
+
+static int microcode_sanity_check(void *mc)
+{
+ struct microcode_header_intel *mc_header = mc;
+ struct extended_sigtable *ext_header = NULL;
+ struct extended_signature *ext_sig;
+ unsigned long total_size, data_size, ext_table_size;
+ int sum, orig_sum, ext_sigcount = 0, i;
+
+ total_size = get_totalsize(mc_header);
+ data_size = get_datasize(mc_header);
+ if (data_size + MC_HEADER_SIZE > total_size) {
+ printk(KERN_ERR "microcode: error! "
+ "Bad data size in microcode data file\n");
+ return -EINVAL;
+ }
+
+ if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
+ printk(KERN_ERR "microcode: error! "
+ "Unknown microcode update format\n");
+ return -EINVAL;
+ }
+ ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
+ if (ext_table_size) {
+ if ((ext_table_size < EXT_HEADER_SIZE)
+ || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
+ printk(KERN_ERR "microcode: error! "
+ "Small exttable size in microcode data file\n");
+ return -EINVAL;
+ }
+ ext_header = mc + MC_HEADER_SIZE + data_size;
+ if (ext_table_size != exttable_size(ext_header)) {
+ printk(KERN_ERR "microcode: error! "
+ "Bad exttable size in microcode data file\n");
+ return -EFAULT;
+ }
+ ext_sigcount = ext_header->count;
+ }
+
+ /* check extended table checksum */
+ if (ext_table_size) {
+ int ext_table_sum = 0;
+ int *ext_tablep = (int *)ext_header;
+
+ i = ext_table_size / DWSIZE;
+ while (i--)
+ ext_table_sum += ext_tablep[i];
+ if (ext_table_sum) {
+ printk(KERN_WARNING "microcode: aborting, "
+ "bad extended signature table checksum\n");
+ return -EINVAL;
+ }
+ }
+
+ /* calculate the checksum */
+ orig_sum = 0;
+ i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+ while (i--)
+ orig_sum += ((int *)mc)[i];
+ if (orig_sum) {
+ printk(KERN_ERR "microcode: aborting, bad checksum\n");
+ return -EINVAL;
+ }
+ if (!ext_table_size)
+ return 0;
+ /* check extended signature checksum */
+ for (i = 0; i < ext_sigcount; i++) {
+ ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
+ EXT_SIGNATURE_SIZE * i;
+ sum = orig_sum
+ - (mc_header->sig + mc_header->pf + mc_header->cksum)
+ + (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
+ if (sum) {
+ printk(KERN_ERR "microcode: aborting, bad checksum\n");
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+/*
+ * return 0 - no update found
+ * return 1 - found update
+ */
+static int
+get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev)
+{
+ struct microcode_header_intel *mc_header = mc;
+ struct extended_sigtable *ext_header;
+ unsigned long total_size = get_totalsize(mc_header);
+ int ext_sigcount, i;
+ struct extended_signature *ext_sig;
+
+ if (!update_match_revision(mc_header, rev))
+ return 0;
+
+ if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf))
+ return 1;
+
+ /* Look for ext. headers: */
+ if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
+ return 0;
+
+ ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
+ ext_sigcount = ext_header->count;
+ ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
+
+ for (i = 0; i < ext_sigcount; i++) {
+ if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf))
+ return 1;
+ ext_sig++;
+ }
+ return 0;
+}
+
+static void apply_microcode(int cpu)
+{
+ unsigned long flags;
+ unsigned int val[2];
+ int cpu_num = raw_smp_processor_id();
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ struct microcode_intel *mc_intel = uci->mc;
+
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu_num != cpu);
+
+ if (mc_intel == NULL)
+ return;
+
+ /* serialize access to the physical write to MSR 0x79 */
+ spin_lock_irqsave(µcode_update_lock, flags);
+
+ /* write microcode via MSR 0x79 */
+ wrmsr(MSR_IA32_UCODE_WRITE,
+ (unsigned long) mc_intel->bits,
+ (unsigned long) mc_intel->bits >> 16 >> 16);
+ wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+
+ /* see notes above for revision 1.07. Apparent chip bug */
+ sync_core();
+
+ /* get the current revision from MSR 0x8B */
+ rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
+
+ spin_unlock_irqrestore(µcode_update_lock, flags);
+ if (val[1] != mc_intel->hdr.rev) {
+ printk(KERN_ERR "microcode: CPU%d update from revision "
+ "0x%x to 0x%x failed\n", cpu_num, uci->cpu_sig.rev, val[1]);
+ return;
+ }
+ printk(KERN_INFO "microcode: CPU%d updated from revision "
+ "0x%x to 0x%x, date = %04x-%02x-%02x \n",
+ cpu_num, uci->cpu_sig.rev, val[1],
+ mc_intel->hdr.date & 0xffff,
+ mc_intel->hdr.date >> 24,
+ (mc_intel->hdr.date >> 16) & 0xff);
+ uci->cpu_sig.rev = val[1];
+}
+
+static int generic_load_microcode(int cpu, void *data, size_t size,
+ int (*get_ucode_data)(void *, const void *, size_t))
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ u8 *ucode_ptr = data, *new_mc = NULL, *mc;
+ int new_rev = uci->cpu_sig.rev;
+ unsigned int leftover = size;
+
+ while (leftover) {
+ struct microcode_header_intel mc_header;
+ unsigned int mc_size;
+
+ if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header)))
+ break;
+
+ mc_size = get_totalsize(&mc_header);
+ if (!mc_size || mc_size > leftover) {
+ printk(KERN_ERR "microcode: error!"
+ "Bad data in microcode data file\n");
+ break;
+ }
+
+ mc = vmalloc(mc_size);
+ if (!mc)
+ break;
+
+ if (get_ucode_data(mc, ucode_ptr, mc_size) ||
+ microcode_sanity_check(mc) < 0) {
+ vfree(mc);
+ break;
+ }
+
+ if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
+ if (new_mc)
+ vfree(new_mc);
+ new_rev = mc_header.rev;
+ new_mc = mc;
+ } else
+ vfree(mc);
+
+ ucode_ptr += mc_size;
+ leftover -= mc_size;
+ }
+
+ if (new_mc) {
+ if (!leftover) {
+ if (uci->mc)
+ vfree(uci->mc);
+ uci->mc = (struct microcode_intel *)new_mc;
+ pr_debug("microcode: CPU%d found a matching microcode update with"
+ " version 0x%x (current=0x%x)\n",
+ cpu, new_rev, uci->cpu_sig.rev);
+ } else
+ vfree(new_mc);
+ }
+
+ return (int)leftover;
+}
+
+static int get_ucode_fw(void *to, const void *from, size_t n)
+{
+ memcpy(to, from, n);
+ return 0;
+}
+
+static int request_microcode_fw(int cpu, struct device *device)
+{
+ char name[30];
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+ const struct firmware *firmware;
+ int ret;
+
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu != raw_smp_processor_id());
+ sprintf(name, "intel-ucode/%02x-%02x-%02x",
+ c->x86, c->x86_model, c->x86_mask);
+ ret = request_firmware(&firmware, name, device);
+ if (ret) {
+ pr_debug("microcode: data file %s load failed\n", name);
+ return ret;
+ }
+
+ ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
+ &get_ucode_fw);
+
+ release_firmware(firmware);
+
+ return ret;
+}
+
+static int get_ucode_user(void *to, const void *from, size_t n)
+{
+ return copy_from_user(to, from, n);
+}
+
+static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+{
+ /* We should bind the task to the CPU */
+ BUG_ON(cpu != raw_smp_processor_id());
+
+ return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user);
+}
+
+static void microcode_fini_cpu(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+
+ vfree(uci->mc);
+ uci->mc = NULL;
+}
+
+struct microcode_ops microcode_intel_ops = {
+ .request_microcode_user = request_microcode_user,
+ .request_microcode_fw = request_microcode_fw,
+ .collect_cpu_info = collect_cpu_info,
+ .apply_microcode = apply_microcode,
+ .microcode_fini_cpu = microcode_fini_cpu,
+};
+
+struct microcode_ops * __init init_intel_microcode(void)
+{
+ return µcode_intel_ops;
+}
+
diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c
new file mode 100644
index 0000000..0e9f198
--- /dev/null
+++ b/arch/x86/kernel/paravirt-spinlocks.c
@@ -0,0 +1,37 @@
+/*
+ * Split spinlock implementation out into its own file, so it can be
+ * compiled in a FTRACE-compatible way.
+ */
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <asm/paravirt.h>
+
+static void default_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags)
+{
+ __raw_spin_lock(lock);
+}
+
+struct pv_lock_ops pv_lock_ops = {
+#ifdef CONFIG_SMP
+ .spin_is_locked = __ticket_spin_is_locked,
+ .spin_is_contended = __ticket_spin_is_contended,
+
+ .spin_lock = __ticket_spin_lock,
+ .spin_lock_flags = default_spin_lock_flags,
+ .spin_trylock = __ticket_spin_trylock,
+ .spin_unlock = __ticket_spin_unlock,
+#endif
+};
+EXPORT_SYMBOL(pv_lock_ops);
+
+void __init paravirt_use_bytelocks(void)
+{
+#ifdef CONFIG_SMP
+ pv_lock_ops.spin_is_locked = __byte_spin_is_locked;
+ pv_lock_ops.spin_is_contended = __byte_spin_is_contended;
+ pv_lock_ops.spin_lock = __byte_spin_lock;
+ pv_lock_ops.spin_trylock = __byte_spin_trylock;
+ pv_lock_ops.spin_unlock = __byte_spin_unlock;
+#endif
+}
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 6b0bb73..e4c8fb6 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -268,17 +268,6 @@
return __get_cpu_var(paravirt_lazy_mode);
}
-void __init paravirt_use_bytelocks(void)
-{
-#ifdef CONFIG_SMP
- pv_lock_ops.spin_is_locked = __byte_spin_is_locked;
- pv_lock_ops.spin_is_contended = __byte_spin_is_contended;
- pv_lock_ops.spin_lock = __byte_spin_lock;
- pv_lock_ops.spin_trylock = __byte_spin_trylock;
- pv_lock_ops.spin_unlock = __byte_spin_unlock;
-#endif
-}
-
struct pv_info pv_info = {
.name = "bare hardware",
.paravirt_enabled = 0,
@@ -349,6 +338,10 @@
.write_ldt_entry = native_write_ldt_entry,
.write_gdt_entry = native_write_gdt_entry,
.write_idt_entry = native_write_idt_entry,
+
+ .alloc_ldt = paravirt_nop,
+ .free_ldt = paravirt_nop,
+
.load_sp0 = native_load_sp0,
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
@@ -460,18 +453,6 @@
.set_fixmap = native_set_fixmap,
};
-struct pv_lock_ops pv_lock_ops = {
-#ifdef CONFIG_SMP
- .spin_is_locked = __ticket_spin_is_locked,
- .spin_is_contended = __ticket_spin_is_contended,
-
- .spin_lock = __ticket_spin_lock,
- .spin_trylock = __ticket_spin_trylock,
- .spin_unlock = __ticket_spin_unlock,
-#endif
-};
-EXPORT_SYMBOL(pv_lock_ops);
-
EXPORT_SYMBOL_GPL(pv_time_ops);
EXPORT_SYMBOL (pv_cpu_ops);
EXPORT_SYMBOL (pv_mmu_ops);
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 205188d..922c140 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -76,47 +76,12 @@
return ((unsigned long *)tsk->thread.sp)[3];
}
-#ifdef CONFIG_HOTPLUG_CPU
-#include <asm/nmi.h>
-
-static void cpu_exit_clear(void)
-{
- int cpu = raw_smp_processor_id();
-
- idle_task_exit();
-
- cpu_uninit();
- irq_ctx_exit(cpu);
-
- cpu_clear(cpu, cpu_callout_map);
- cpu_clear(cpu, cpu_callin_map);
-
- numa_remove_cpu(cpu);
- c1e_remove_cpu(cpu);
-}
-
-/* We don't actually take CPU down, just spin without interrupts. */
-static inline void play_dead(void)
-{
- /* This must be done before dead CPU ack */
- cpu_exit_clear();
- mb();
- /* Ack it */
- __get_cpu_var(cpu_state) = CPU_DEAD;
-
- /*
- * With physical CPU hotplug, we should halt the cpu
- */
- local_irq_disable();
- /* mask all interrupts, flush any and all caches, and halt */
- wbinvd_halt();
-}
-#else
+#ifndef CONFIG_SMP
static inline void play_dead(void)
{
BUG();
}
-#endif /* CONFIG_HOTPLUG_CPU */
+#endif
/*
* The idle thread. There's no useful work to be
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index b6b508e..ca80394 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -86,30 +86,12 @@
__exit_idle();
}
-#ifdef CONFIG_HOTPLUG_CPU
-DECLARE_PER_CPU(int, cpu_state);
-
-#include <linux/nmi.h>
-/* We halt the CPU with physical CPU hotplug */
-static inline void play_dead(void)
-{
- idle_task_exit();
- c1e_remove_cpu(raw_smp_processor_id());
-
- mb();
- /* Ack it */
- __get_cpu_var(cpu_state) = CPU_DEAD;
-
- local_irq_disable();
- /* mask all interrupts, flush any and all caches, and halt */
- wbinvd_halt();
-}
-#else
+#ifndef CONFIG_SMP
static inline void play_dead(void)
{
BUG();
}
-#endif /* CONFIG_HOTPLUG_CPU */
+#endif
/*
* The idle thread. There's no useful work to be
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index e375b65..0a6d8c1 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -40,7 +40,9 @@
REGSET_GENERAL,
REGSET_FP,
REGSET_XFP,
+ REGSET_IOPERM64 = REGSET_XFP,
REGSET_TLS,
+ REGSET_IOPERM32,
};
/*
@@ -555,6 +557,29 @@
return 0;
}
+/*
+ * These access the current or another (stopped) task's io permission
+ * bitmap for debugging or core dump.
+ */
+static int ioperm_active(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ return target->thread.io_bitmap_max / regset->size;
+}
+
+static int ioperm_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ if (!target->thread.io_bitmap_ptr)
+ return -ENXIO;
+
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ target->thread.io_bitmap_ptr,
+ 0, IO_BITMAP_BYTES);
+}
+
#ifdef CONFIG_X86_PTRACE_BTS
/*
* The configuration for a particular BTS hardware implementation.
@@ -1385,6 +1410,12 @@
.size = sizeof(long), .align = sizeof(long),
.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
},
+ [REGSET_IOPERM64] = {
+ .core_note_type = NT_386_IOPERM,
+ .n = IO_BITMAP_LONGS,
+ .size = sizeof(long), .align = sizeof(long),
+ .active = ioperm_active, .get = ioperm_get
+ },
};
static const struct user_regset_view user_x86_64_view = {
@@ -1431,6 +1462,12 @@
.active = regset_tls_active,
.get = regset_tls_get, .set = regset_tls_set
},
+ [REGSET_IOPERM32] = {
+ .core_note_type = NT_386_IOPERM,
+ .n = IO_BITMAP_BYTES / sizeof(u32),
+ .size = sizeof(u32), .align = sizeof(u32),
+ .active = ioperm_active, .get = ioperm_get
+ },
};
static const struct user_regset_view user_x86_32_view = {
@@ -1452,7 +1489,8 @@
#endif
}
-void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
+void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
+ int error_code, int si_code)
{
struct siginfo info;
@@ -1461,7 +1499,7 @@
memset(&info, 0, sizeof(info));
info.si_signo = SIGTRAP;
- info.si_code = TRAP_BRKPT;
+ info.si_code = si_code;
/* User-mode ip? */
info.si_addr = user_mode_vm(regs) ? (void __user *) regs->ip : NULL;
@@ -1548,5 +1586,5 @@
*/
if (test_thread_flag(TIF_SINGLESTEP) &&
tracehook_consider_fatal_signal(current, SIGTRAP, SIG_DFL))
- send_sigtrap(current, regs, 0);
+ send_sigtrap(current, regs, 0, TRAP_BRKPT);
}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 46c98ef..21b8e0a 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -582,6 +582,190 @@
struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
/*
+ * Some BIOSes seem to corrupt the low 64k of memory during events
+ * like suspend/resume and unplugging an HDMI cable. Reserve all
+ * remaining free memory in that area and fill it with a distinct
+ * pattern.
+ */
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+#define MAX_SCAN_AREAS 8
+
+static int __read_mostly memory_corruption_check = -1;
+
+static unsigned __read_mostly corruption_check_size = 64*1024;
+static unsigned __read_mostly corruption_check_period = 60; /* seconds */
+
+static struct e820entry scan_areas[MAX_SCAN_AREAS];
+static int num_scan_areas;
+
+
+static int set_corruption_check(char *arg)
+{
+ char *end;
+
+ memory_corruption_check = simple_strtol(arg, &end, 10);
+
+ return (*end == 0) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check", set_corruption_check);
+
+static int set_corruption_check_period(char *arg)
+{
+ char *end;
+
+ corruption_check_period = simple_strtoul(arg, &end, 10);
+
+ return (*end == 0) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check_period", set_corruption_check_period);
+
+static int set_corruption_check_size(char *arg)
+{
+ char *end;
+ unsigned size;
+
+ size = memparse(arg, &end);
+
+ if (*end == '\0')
+ corruption_check_size = size;
+
+ return (size == corruption_check_size) ? 0 : -EINVAL;
+}
+early_param("memory_corruption_check_size", set_corruption_check_size);
+
+
+static void __init setup_bios_corruption_check(void)
+{
+ u64 addr = PAGE_SIZE; /* assume first page is reserved anyway */
+
+ if (memory_corruption_check == -1) {
+ memory_corruption_check =
+#ifdef CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
+ 1
+#else
+ 0
+#endif
+ ;
+ }
+
+ if (corruption_check_size == 0)
+ memory_corruption_check = 0;
+
+ if (!memory_corruption_check)
+ return;
+
+ corruption_check_size = round_up(corruption_check_size, PAGE_SIZE);
+
+ while(addr < corruption_check_size && num_scan_areas < MAX_SCAN_AREAS) {
+ u64 size;
+ addr = find_e820_area_size(addr, &size, PAGE_SIZE);
+
+ if (addr == 0)
+ break;
+
+ if ((addr + size) > corruption_check_size)
+ size = corruption_check_size - addr;
+
+ if (size == 0)
+ break;
+
+ e820_update_range(addr, size, E820_RAM, E820_RESERVED);
+ scan_areas[num_scan_areas].addr = addr;
+ scan_areas[num_scan_areas].size = size;
+ num_scan_areas++;
+
+ /* Assume we've already mapped this early memory */
+ memset(__va(addr), 0, size);
+
+ addr += size;
+ }
+
+ printk(KERN_INFO "Scanning %d areas for low memory corruption\n",
+ num_scan_areas);
+ update_e820();
+}
+
+static struct timer_list periodic_check_timer;
+
+void check_for_bios_corruption(void)
+{
+ int i;
+ int corruption = 0;
+
+ if (!memory_corruption_check)
+ return;
+
+ for(i = 0; i < num_scan_areas; i++) {
+ unsigned long *addr = __va(scan_areas[i].addr);
+ unsigned long size = scan_areas[i].size;
+
+ for(; size; addr++, size -= sizeof(unsigned long)) {
+ if (!*addr)
+ continue;
+ printk(KERN_ERR "Corrupted low memory at %p (%lx phys) = %08lx\n",
+ addr, __pa(addr), *addr);
+ corruption = 1;
+ *addr = 0;
+ }
+ }
+
+ WARN(corruption, KERN_ERR "Memory corruption detected in low memory\n");
+}
+
+static void periodic_check_for_corruption(unsigned long data)
+{
+ check_for_bios_corruption();
+ mod_timer(&periodic_check_timer, round_jiffies(jiffies + corruption_check_period*HZ));
+}
+
+void start_periodic_check_for_corruption(void)
+{
+ if (!memory_corruption_check || corruption_check_period == 0)
+ return;
+
+ printk(KERN_INFO "Scanning for low memory corruption every %d seconds\n",
+ corruption_check_period);
+
+ init_timer(&periodic_check_timer);
+ periodic_check_timer.function = &periodic_check_for_corruption;
+ periodic_check_for_corruption(0);
+}
+#endif
+
+static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
+{
+ printk(KERN_NOTICE
+ "%s detected: BIOS may corrupt low RAM, working it around.\n",
+ d->ident);
+
+ e820_update_range(0, 0x10000, E820_RAM, E820_RESERVED);
+ sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
+
+ return 0;
+}
+
+/* List of systems that have known low memory corruption BIOS problems */
+static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
+#ifdef CONFIG_X86_RESERVE_LOW_64K
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "AMI BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ },
+ },
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "Phoenix BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+ },
+ },
+#endif
+ {}
+};
+
+/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
* for initialization. Note, the efi init code path is determined by the
@@ -715,6 +899,10 @@
finish_e820_parsing();
+ dmi_scan_machine();
+
+ dmi_check_system(bad_bios_dmi_table);
+
#ifdef CONFIG_X86_32
probe_roms();
#endif
@@ -771,6 +959,10 @@
high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
#endif
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+ setup_bios_corruption_check();
+#endif
+
/* max_pfn_mapped is updated here */
max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
@@ -799,8 +991,6 @@
vsmp_init();
#endif
- dmi_scan_machine();
-
io_delay_init();
/*
@@ -903,3 +1093,5 @@
#endif
#endif
}
+
+
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index b21070e..d6dd057 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -27,6 +27,7 @@
#include <asm/uaccess.h>
#include <asm/i387.h>
#include <asm/vdso.h>
+#include <asm/syscall.h>
#include <asm/syscalls.h>
#include "sigframe.h"
@@ -112,6 +113,27 @@
return do_sigaltstack(uss, uoss, regs->sp);
}
+#define COPY(x) { \
+ err |= __get_user(regs->x, &sc->x); \
+}
+
+#define COPY_SEG(seg) { \
+ unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ regs->seg = tmp; \
+}
+
+#define COPY_SEG_STRICT(seg) { \
+ unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ regs->seg = tmp | 3; \
+}
+
+#define GET_SEG(seg) { \
+ unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ loadsegment(seg, tmp); \
+}
/*
* Do a signal return; undo the signal stack.
@@ -120,28 +142,13 @@
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
unsigned long *pax)
{
+ void __user *buf;
+ unsigned int tmpflags;
unsigned int err = 0;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
-#define COPY(x) err |= __get_user(regs->x, &sc->x)
-
-#define COPY_SEG(seg) \
- { unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- regs->seg = tmp; }
-
-#define COPY_SEG_STRICT(seg) \
- { unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- regs->seg = tmp|3; }
-
-#define GET_SEG(seg) \
- { unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- loadsegment(seg, tmp); }
-
GET_SEG(gs);
COPY_SEG(fs);
COPY_SEG(es);
@@ -151,21 +158,12 @@
COPY_SEG_STRICT(cs);
COPY_SEG_STRICT(ss);
- {
- unsigned int tmpflags;
+ err |= __get_user(tmpflags, &sc->flags);
+ regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+ regs->orig_ax = -1; /* disable syscall checks */
- err |= __get_user(tmpflags, &sc->flags);
- regs->flags = (regs->flags & ~FIX_EFLAGS) |
- (tmpflags & FIX_EFLAGS);
- regs->orig_ax = -1; /* disable syscall checks */
- }
-
- {
- void __user *buf;
-
- err |= __get_user(buf, &sc->fpstate);
- err |= restore_i387_xstate(buf);
- }
+ err |= __get_user(buf, &sc->fpstate);
+ err |= restore_i387_xstate(buf);
err |= __get_user(*pax, &sc->ax);
return err;
@@ -214,9 +212,8 @@
return 0;
}
-asmlinkage int sys_rt_sigreturn(unsigned long __unused)
+static long do_rt_sigreturn(struct pt_regs *regs)
{
- struct pt_regs *regs = (struct pt_regs *)&__unused;
struct rt_sigframe __user *frame;
unsigned long ax;
sigset_t set;
@@ -242,10 +239,17 @@
return ax;
badframe:
- force_sig(SIGSEGV, current);
+ signal_fault(regs, frame, "rt_sigreturn");
return 0;
}
+asmlinkage int sys_rt_sigreturn(unsigned long __unused)
+{
+ struct pt_regs *regs = (struct pt_regs *)&__unused;
+
+ return do_rt_sigreturn(regs);
+}
+
/*
* Set up a signal frame.
*/
@@ -337,39 +341,29 @@
}
static int
-setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
- struct pt_regs *regs)
+__setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
+ struct pt_regs *regs)
{
struct sigframe __user *frame;
void __user *restorer;
int err = 0;
- int usig;
void __user *fpstate = NULL;
frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
+ return -EFAULT;
- usig = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
+ if (__put_user(sig, &frame->sig))
+ return -EFAULT;
- err = __put_user(usig, &frame->sig);
- if (err)
- goto give_sigsegv;
-
- err = setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]);
- if (err)
- goto give_sigsegv;
+ if (setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]))
+ return -EFAULT;
if (_NSIG_WORDS > 1) {
- err = __copy_to_user(&frame->extramask, &set->sig[1],
- sizeof(frame->extramask));
- if (err)
- goto give_sigsegv;
+ if (__copy_to_user(&frame->extramask, &set->sig[1],
+ sizeof(frame->extramask)))
+ return -EFAULT;
}
if (current->mm->context.vdso)
@@ -394,7 +388,7 @@
err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
if (err)
- goto give_sigsegv;
+ return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long)frame;
@@ -409,38 +403,27 @@
regs->cs = __USER_CS;
return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
}
-static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs *regs)
+static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
void __user *restorer;
int err = 0;
- int usig;
void __user *fpstate = NULL;
frame = get_sigframe(ka, regs, sizeof(*frame), &fpstate);
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
+ return -EFAULT;
- usig = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
-
- err |= __put_user(usig, &frame->sig);
+ err |= __put_user(sig, &frame->sig);
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
- goto give_sigsegv;
+ return -EFAULT;
/* Create the ucontext. */
if (cpu_has_xsave)
@@ -456,7 +439,7 @@
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
- goto give_sigsegv;
+ return -EFAULT;
/* Set up to return from userspace. */
restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn);
@@ -476,12 +459,12 @@
err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
if (err)
- goto give_sigsegv;
+ return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long)frame;
regs->ip = (unsigned long)ka->sa.sa_handler;
- regs->ax = (unsigned long)usig;
+ regs->ax = (unsigned long)sig;
regs->dx = (unsigned long)&frame->info;
regs->cx = (unsigned long)&frame->uc;
@@ -491,15 +474,48 @@
regs->cs = __USER_CS;
return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
}
/*
* OK, we're invoking a handler:
*/
+static int signr_convert(int sig)
+{
+ struct thread_info *info = current_thread_info();
+
+ if (info->exec_domain && info->exec_domain->signal_invmap && sig < 32)
+ return info->exec_domain->signal_invmap[sig];
+ return sig;
+}
+
+#define is_ia32 1
+#define ia32_setup_frame __setup_frame
+#define ia32_setup_rt_frame __setup_rt_frame
+
+static int
+setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ int usig = signr_convert(sig);
+ int ret;
+
+ /* Set up the stack frame */
+ if (is_ia32) {
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ ret = ia32_setup_rt_frame(usig, ka, info, set, regs);
+ else
+ ret = ia32_setup_frame(usig, ka, set, regs);
+ } else
+ ret = __setup_rt_frame(sig, ka, info, set, regs);
+
+ if (ret) {
+ force_sigsegv(sig, current);
+ return -EFAULT;
+ }
+
+ return ret;
+}
+
static int
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs *regs)
@@ -507,9 +523,9 @@
int ret;
/* Are we from a system call? */
- if ((long)regs->orig_ax >= 0) {
+ if (syscall_get_nr(current, regs) >= 0) {
/* If so, check system call restarting.. */
- switch (regs->ax) {
+ switch (syscall_get_error(current, regs)) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->ax = -EINTR;
@@ -536,15 +552,20 @@
likely(test_and_clear_thread_flag(TIF_FORCED_TF)))
regs->flags &= ~X86_EFLAGS_TF;
- /* Set up the stack frame */
- if (ka->sa.sa_flags & SA_SIGINFO)
- ret = setup_rt_frame(sig, ka, info, oldset, regs);
- else
- ret = setup_frame(sig, ka, oldset, regs);
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
if (ret)
return ret;
+#ifdef CONFIG_X86_64
+ /*
+ * This has nothing to do with segment registers,
+ * despite the name. This magic affects uaccess.h
+ * macros' behavior. Reset it to the normal setting.
+ */
+ set_fs(USER_DS);
+#endif
+
/*
* Clear the direction flag as per the ABI for function entry.
*/
@@ -571,6 +592,7 @@
return 0;
}
+#define NR_restart_syscall __NR_restart_syscall
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
@@ -623,9 +645,9 @@
}
/* Did we come from a system call? */
- if ((long)regs->orig_ax >= 0) {
+ if (syscall_get_nr(current, regs) >= 0) {
/* Restart the system call - no handlers present */
- switch (regs->ax) {
+ switch (syscall_get_error(current, regs)) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
@@ -634,7 +656,7 @@
break;
case -ERESTART_RESTARTBLOCK:
- regs->ax = __NR_restart_syscall;
+ regs->ax = NR_restart_syscall;
regs->ip -= 2;
break;
}
@@ -657,6 +679,12 @@
void
do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
{
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
+ /* notify userspace of pending MCEs */
+ if (thread_info_flags & _TIF_MCE_NOTIFY)
+ mce_notify_user();
+#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
+
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
do_signal(regs);
@@ -666,5 +694,23 @@
tracehook_notify_resume(regs);
}
+#ifdef CONFIG_X86_32
clear_thread_flag(TIF_IRET);
+#endif /* CONFIG_X86_32 */
+}
+
+void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
+{
+ struct task_struct *me = current;
+
+ if (show_unhandled_signals && printk_ratelimit()) {
+ printk(KERN_INFO
+ "%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
+ me->comm, me->pid, where, frame,
+ regs->ip, regs->sp, regs->orig_ax);
+ print_vma_addr(" in ", regs->ip);
+ printk(KERN_CONT "\n");
+ }
+
+ force_sig(SIGSEGV, me);
}
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index 823a55b..a5c9627 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -52,6 +52,16 @@
return do_sigaltstack(uss, uoss, regs->sp);
}
+#define COPY(x) { \
+ err |= __get_user(regs->x, &sc->x); \
+}
+
+#define COPY_SEG_STRICT(seg) { \
+ unsigned short tmp; \
+ err |= __get_user(tmp, &sc->seg); \
+ regs->seg = tmp | 3; \
+}
+
/*
* Do a signal return; undo the signal stack.
*/
@@ -59,13 +69,13 @@
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
unsigned long *pax)
{
+ void __user *buf;
+ unsigned int tmpflags;
unsigned int err = 0;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
-#define COPY(x) (err |= __get_user(regs->x, &sc->x))
-
COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
COPY(dx); COPY(cx); COPY(ip);
COPY(r8);
@@ -80,34 +90,24 @@
/* Kernel saves and restores only the CS segment register on signals,
* which is the bare minimum needed to allow mixed 32/64-bit code.
* App's signal handler can save/restore other segments if needed. */
- {
- unsigned cs;
- err |= __get_user(cs, &sc->cs);
- regs->cs = cs | 3; /* Force into user mode */
- }
+ COPY_SEG_STRICT(cs);
- {
- unsigned int tmpflags;
- err |= __get_user(tmpflags, &sc->flags);
- regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
- regs->orig_ax = -1; /* disable syscall checks */
- }
+ err |= __get_user(tmpflags, &sc->flags);
+ regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+ regs->orig_ax = -1; /* disable syscall checks */
- {
- struct _fpstate __user *buf;
- err |= __get_user(buf, &sc->fpstate);
- err |= restore_i387_xstate(buf);
- }
+ err |= __get_user(buf, &sc->fpstate);
+ err |= restore_i387_xstate(buf);
err |= __get_user(*pax, &sc->ax);
return err;
}
-asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
+static long do_rt_sigreturn(struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
- sigset_t set;
unsigned long ax;
+ sigset_t set;
frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
@@ -130,10 +130,15 @@
return ax;
badframe:
- signal_fault(regs, frame, "sigreturn");
+ signal_fault(regs, frame, "rt_sigreturn");
return 0;
}
+asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
+{
+ return do_rt_sigreturn(regs);
+}
+
/*
* Set up a signal frame.
*/
@@ -195,8 +200,8 @@
return (void __user *)round_down(sp - size, 64);
}
-static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs *regs)
+static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe __user *frame;
void __user *fp = NULL;
@@ -209,17 +214,16 @@
(unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
if (save_i387_xstate(fp) < 0)
- err |= -1;
+ return -EFAULT;
} else
frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8;
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
+ return -EFAULT;
if (ka->sa.sa_flags & SA_SIGINFO) {
- err |= copy_siginfo_to_user(&frame->info, info);
- if (err)
- goto give_sigsegv;
+ if (copy_siginfo_to_user(&frame->info, info))
+ return -EFAULT;
}
/* Create the ucontext. */
@@ -247,11 +251,11 @@
err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
} else {
/* could use a vstub here */
- goto give_sigsegv;
+ return -EFAULT;
}
if (err)
- goto give_sigsegv;
+ return -EFAULT;
/* Set up registers for signal handler */
regs->di = sig;
@@ -271,15 +275,45 @@
regs->cs = __USER_CS;
return 0;
-
-give_sigsegv:
- force_sigsegv(sig, current);
- return -EFAULT;
}
/*
* OK, we're invoking a handler
*/
+static int signr_convert(int sig)
+{
+ return sig;
+}
+
+#ifdef CONFIG_IA32_EMULATION
+#define is_ia32 test_thread_flag(TIF_IA32)
+#else
+#define is_ia32 0
+#endif
+
+static int
+setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ int usig = signr_convert(sig);
+ int ret;
+
+ /* Set up the stack frame */
+ if (is_ia32) {
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ ret = ia32_setup_rt_frame(usig, ka, info, set, regs);
+ else
+ ret = ia32_setup_frame(usig, ka, set, regs);
+ } else
+ ret = __setup_rt_frame(sig, ka, info, set, regs);
+
+ if (ret) {
+ force_sigsegv(sig, current);
+ return -EFAULT;
+ }
+
+ return ret;
+}
static int
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
@@ -317,51 +351,48 @@
likely(test_and_clear_thread_flag(TIF_FORCED_TF)))
regs->flags &= ~X86_EFLAGS_TF;
-#ifdef CONFIG_IA32_EMULATION
- if (test_thread_flag(TIF_IA32)) {
- if (ka->sa.sa_flags & SA_SIGINFO)
- ret = ia32_setup_rt_frame(sig, ka, info, oldset, regs);
- else
- ret = ia32_setup_frame(sig, ka, oldset, regs);
- } else
-#endif
ret = setup_rt_frame(sig, ka, info, oldset, regs);
- if (ret == 0) {
- /*
- * This has nothing to do with segment registers,
- * despite the name. This magic affects uaccess.h
- * macros' behavior. Reset it to the normal setting.
- */
- set_fs(USER_DS);
+ if (ret)
+ return ret;
- /*
- * Clear the direction flag as per the ABI for function entry.
- */
- regs->flags &= ~X86_EFLAGS_DF;
+#ifdef CONFIG_X86_64
+ /*
+ * This has nothing to do with segment registers,
+ * despite the name. This magic affects uaccess.h
+ * macros' behavior. Reset it to the normal setting.
+ */
+ set_fs(USER_DS);
+#endif
- /*
- * Clear TF when entering the signal handler, but
- * notify any tracer that was single-stepping it.
- * The tracer may want to single-step inside the
- * handler too.
- */
- regs->flags &= ~X86_EFLAGS_TF;
+ /*
+ * Clear the direction flag as per the ABI for function entry.
+ */
+ regs->flags &= ~X86_EFLAGS_DF;
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
- if (!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(¤t->blocked, sig);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
+ /*
+ * Clear TF when entering the signal handler, but
+ * notify any tracer that was single-stepping it.
+ * The tracer may want to single-step inside the
+ * handler too.
+ */
+ regs->flags &= ~X86_EFLAGS_TF;
- tracehook_signal_handler(sig, info, ka, regs,
- test_thread_flag(TIF_SINGLESTEP));
- }
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
- return ret;
+ tracehook_signal_handler(sig, info, ka, regs,
+ test_thread_flag(TIF_SINGLESTEP));
+
+ return 0;
}
+#define NR_restart_syscall \
+ test_thread_flag(TIF_IA32) ? __NR_ia32_restart_syscall : __NR_restart_syscall
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
@@ -391,7 +422,8 @@
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
- /* Re-enable any watchpoints before delivering the
+ /*
+ * Re-enable any watchpoints before delivering the
* signal to user space. The processor register will
* have been cleared if the watchpoint triggered
* inside the kernel.
@@ -399,7 +431,7 @@
if (current->thread.debugreg7)
set_debugreg(current->thread.debugreg7, 7);
- /* Whee! Actually deliver the signal. */
+ /* Whee! Actually deliver the signal. */
if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
/*
* A signal was successfully delivered; the saved
@@ -422,10 +454,9 @@
regs->ax = regs->orig_ax;
regs->ip -= 2;
break;
+
case -ERESTART_RESTARTBLOCK:
- regs->ax = test_thread_flag(TIF_IA32) ?
- __NR_ia32_restart_syscall :
- __NR_restart_syscall;
+ regs->ax = NR_restart_syscall;
regs->ip -= 2;
break;
}
@@ -441,14 +472,18 @@
}
}
-void do_notify_resume(struct pt_regs *regs, void *unused,
- __u32 thread_info_flags)
+/*
+ * notification of userspace execution resumption
+ * - triggered by the TIF_WORK_MASK flags
+ */
+void
+do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
{
-#ifdef CONFIG_X86_MCE
+#if defined(CONFIG_X86_64) && defined(CONFIG_X86_MCE)
/* notify userspace of pending MCEs */
if (thread_info_flags & _TIF_MCE_NOTIFY)
mce_notify_user();
-#endif /* CONFIG_X86_MCE */
+#endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
/* deal with pending signal delivery */
if (thread_info_flags & _TIF_SIGPENDING)
@@ -458,17 +493,23 @@
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
}
+
+#ifdef CONFIG_X86_32
+ clear_thread_flag(TIF_IRET);
+#endif /* CONFIG_X86_32 */
}
void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
{
struct task_struct *me = current;
+
if (show_unhandled_signals && printk_ratelimit()) {
- printk("%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
- me->comm, me->pid, where, frame, regs->ip,
- regs->sp, regs->orig_ax);
+ printk(KERN_INFO
+ "%s[%d] bad frame in %s frame:%p ip:%lx sp:%lx orax:%lx",
+ me->comm, me->pid, where, frame,
+ regs->ip, regs->sp, regs->orig_ax);
print_vma_addr(" in ", regs->ip);
- printk("\n");
+ printk(KERN_CONT "\n");
}
force_sig(SIGSEGV, me);
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 361b7a4..18f9b19 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -214,12 +214,16 @@
struct smp_ops smp_ops = {
.smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
.smp_prepare_cpus = native_smp_prepare_cpus,
- .cpu_up = native_cpu_up,
.smp_cpus_done = native_smp_cpus_done,
.smp_send_stop = native_smp_send_stop,
.smp_send_reschedule = native_smp_send_reschedule,
+ .cpu_up = native_cpu_up,
+ .cpu_die = native_cpu_die,
+ .cpu_disable = native_cpu_disable,
+ .play_dead = native_play_dead,
+
.send_call_func_ipi = native_send_call_func_ipi,
.send_call_func_single_ipi = native_send_call_func_single_ipi,
};
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 9056f7e..76b6f50 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -52,6 +52,7 @@
#include <asm/desc.h>
#include <asm/nmi.h>
#include <asm/irq.h>
+#include <asm/idle.h>
#include <asm/smp.h>
#include <asm/trampoline.h>
#include <asm/cpu.h>
@@ -1344,7 +1345,29 @@
numa_remove_cpu(cpu);
}
-int __cpu_disable(void)
+void cpu_disable_common(void)
+{
+ int cpu = smp_processor_id();
+ /*
+ * HACK:
+ * Allow any queued timer interrupts to get serviced
+ * This is only a temporary solution until we cleanup
+ * fixup_irqs as we do for IA64.
+ */
+ local_irq_enable();
+ mdelay(1);
+
+ local_irq_disable();
+ remove_siblinginfo(cpu);
+
+ /* It's now safe to remove this processor from the online map */
+ lock_vector_lock();
+ remove_cpu_from_maps(cpu);
+ unlock_vector_lock();
+ fixup_irqs(cpu_online_map);
+}
+
+int native_cpu_disable(void)
{
int cpu = smp_processor_id();
@@ -1363,27 +1386,11 @@
stop_apic_nmi_watchdog(NULL);
clear_local_APIC();
- /*
- * HACK:
- * Allow any queued timer interrupts to get serviced
- * This is only a temporary solution until we cleanup
- * fixup_irqs as we do for IA64.
- */
- local_irq_enable();
- mdelay(1);
-
- local_irq_disable();
- remove_siblinginfo(cpu);
-
- /* It's now safe to remove this processor from the online map */
- lock_vector_lock();
- remove_cpu_from_maps(cpu);
- unlock_vector_lock();
- fixup_irqs(cpu_online_map);
+ cpu_disable_common();
return 0;
}
-void __cpu_die(unsigned int cpu)
+void native_cpu_die(unsigned int cpu)
{
/* We don't do anything here: idle task is faking death itself. */
unsigned int i;
@@ -1400,15 +1407,45 @@
}
printk(KERN_ERR "CPU %u didn't die...\n", cpu);
}
+
+void play_dead_common(void)
+{
+ idle_task_exit();
+ reset_lazy_tlbstate();
+ irq_ctx_exit(raw_smp_processor_id());
+ c1e_remove_cpu(raw_smp_processor_id());
+
+ mb();
+ /* Ack it */
+ __get_cpu_var(cpu_state) = CPU_DEAD;
+
+ /*
+ * With physical CPU hotplug, we should halt the cpu
+ */
+ local_irq_disable();
+}
+
+void native_play_dead(void)
+{
+ play_dead_common();
+ wbinvd_halt();
+}
+
#else /* ... !CONFIG_HOTPLUG_CPU */
-int __cpu_disable(void)
+int native_cpu_disable(void)
{
return -ENOSYS;
}
-void __cpu_die(unsigned int cpu)
+void native_cpu_die(unsigned int cpu)
{
/* We said "no" in __cpu_disable */
BUG();
}
+
+void native_play_dead(void)
+{
+ BUG();
+}
+
#endif
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index fec1ece..e00534b 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -241,3 +241,11 @@
on_each_cpu(do_flush_tlb_all, NULL, 1);
}
+void reset_lazy_tlbstate(void)
+{
+ int cpu = raw_smp_processor_id();
+
+ per_cpu(cpu_tlbstate, cpu).state = 0;
+ per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
+}
+
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index da5a596..0429c5d 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -891,6 +891,7 @@
{
struct task_struct *tsk = current;
unsigned int condition;
+ int si_code;
trace_hardirqs_fixup();
@@ -935,8 +936,9 @@
goto clear_TF_reenable;
}
+ si_code = get_si_code((unsigned long)condition);
/* Ok, finally something we can handle */
- send_sigtrap(tsk, regs, error_code);
+ send_sigtrap(tsk, regs, error_code, si_code);
/*
* Disable additional traps. They'll be re-enabled when
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index 2887a78..9c0ac0c 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -940,7 +940,7 @@
tsk->thread.error_code = error_code;
info.si_signo = SIGTRAP;
info.si_errno = 0;
- info.si_code = TRAP_BRKPT;
+ info.si_code = get_si_code(condition);
info.si_addr = user_mode(regs) ? (void __user *)regs->ip : NULL;
force_sig_info(SIGTRAP, &info, tsk);
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 07713d6..9abac8a 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -95,7 +95,9 @@
* Start with clearing the user buffer. This will present a
* clean context for the bytes not touched by the fxsave/xsave.
*/
- __clear_user(buf, sig_xstate_size);
+ err = __clear_user(buf, sig_xstate_size);
+ if (err)
+ return err;
if (task_thread_info(tsk)->status & TS_XSAVE)
err = xsave_user(buf);
@@ -114,6 +116,8 @@
if (task_thread_info(tsk)->status & TS_XSAVE) {
struct _fpstate __user *fx = buf;
+ struct _xstate __user *x = buf;
+ u64 xstate_bv;
err = __copy_to_user(&fx->sw_reserved, &fx_sw_reserved,
sizeof(struct _fpx_sw_bytes));
@@ -121,6 +125,31 @@
err |= __put_user(FP_XSTATE_MAGIC2,
(__u32 __user *) (buf + sig_xstate_size
- FP_XSTATE_MAGIC2_SIZE));
+
+ /*
+ * Read the xstate_bv which we copied (directly from the cpu or
+ * from the state in task struct) to the user buffers and
+ * set the FP/SSE bits.
+ */
+ err |= __get_user(xstate_bv, &x->xstate_hdr.xstate_bv);
+
+ /*
+ * For legacy compatible, we always set FP/SSE bits in the bit
+ * vector while saving the state to the user context. This will
+ * enable us capturing any changes(during sigreturn) to
+ * the FP/SSE bits by the legacy applications which don't touch
+ * xstate_bv in the xsave header.
+ *
+ * xsave aware apps can change the xstate_bv in the xsave
+ * header as well as change any contents in the memory layout.
+ * xrestore as part of sigreturn will capture all the changes.
+ */
+ xstate_bv |= XSTATE_FPSSE;
+
+ err |= __put_user(xstate_bv, &x->xstate_hdr.xstate_bv);
+
+ if (err)
+ return err;
}
return 1;
@@ -272,7 +301,7 @@
/*
* setup the xstate image representing the init state
*/
-void setup_xstate_init(void)
+static void __init setup_xstate_init(void)
{
init_xstate_buf = alloc_bootmem(xstate_size);
init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 8f92cac..a742d75 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -914,15 +914,15 @@
void vmalloc_sync_all(void)
{
-#ifdef CONFIG_X86_32
- unsigned long start = VMALLOC_START & PGDIR_MASK;
unsigned long address;
+#ifdef CONFIG_X86_32
if (SHARED_KERNEL_PMD)
return;
- BUILD_BUG_ON(TASK_SIZE & ~PGDIR_MASK);
- for (address = start; address >= TASK_SIZE; address += PGDIR_SIZE) {
+ for (address = VMALLOC_START & PMD_MASK;
+ address >= TASK_SIZE && address < FIXADDR_TOP;
+ address += PMD_SIZE) {
unsigned long flags;
struct page *page;
@@ -935,10 +935,8 @@
spin_unlock_irqrestore(&pgd_lock, flags);
}
#else /* CONFIG_X86_64 */
- unsigned long start = VMALLOC_START & PGDIR_MASK;
- unsigned long address;
-
- for (address = start; address <= VMALLOC_END; address += PGDIR_SIZE) {
+ for (address = VMALLOC_START & PGDIR_MASK; address <= VMALLOC_END;
+ address += PGDIR_SIZE) {
const pgd_t *pgd_ref = pgd_offset_k(address);
unsigned long flags;
struct page *page;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index c3789bb..bbe044d 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -31,6 +31,7 @@
#include <linux/cpumask.h>
#include <asm/asm.h>
+#include <asm/bios_ebda.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/uaccess.h>
@@ -969,6 +970,8 @@
int codesize, reservedpages, datasize, initsize;
int tmp;
+ start_periodic_check_for_corruption();
+
#ifdef CONFIG_FLATMEM
BUG_ON(!mem_map);
#endif
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 83e13f2..3e10054 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -31,6 +31,7 @@
#include <linux/nmi.h>
#include <asm/processor.h>
+#include <asm/bios_ebda.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
@@ -881,6 +882,8 @@
{
long codesize, reservedpages, datasize, initsize;
+ start_periodic_check_for_corruption();
+
pci_iommu_alloc();
/* clear_bss() already clear the empty_zero_page */
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 10b5230..8cbeda1 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -24,19 +24,27 @@
#ifdef CONFIG_X86_64
-unsigned long __phys_addr(unsigned long x)
-{
- if (x >= __START_KERNEL_map)
- return x - __START_KERNEL_map + phys_base;
- return x - PAGE_OFFSET;
-}
-EXPORT_SYMBOL(__phys_addr);
-
static inline int phys_addr_valid(unsigned long addr)
{
return addr < (1UL << boot_cpu_data.x86_phys_bits);
}
+unsigned long __phys_addr(unsigned long x)
+{
+ if (x >= __START_KERNEL_map) {
+ x -= __START_KERNEL_map;
+ VIRTUAL_BUG_ON(x >= KERNEL_IMAGE_SIZE);
+ x += phys_base;
+ } else {
+ VIRTUAL_BUG_ON(x < PAGE_OFFSET);
+ x -= PAGE_OFFSET;
+ VIRTUAL_BUG_ON(system_state == SYSTEM_BOOTING ? x > MAXMEM :
+ !phys_addr_valid(x));
+ }
+ return x;
+}
+EXPORT_SYMBOL(__phys_addr);
+
#else
static inline int phys_addr_valid(unsigned long addr)
@@ -44,6 +52,17 @@
return 1;
}
+#ifdef CONFIG_DEBUG_VIRTUAL
+unsigned long __phys_addr(unsigned long x)
+{
+ /* VMALLOC_* aren't constants; not available at the boot time */
+ VIRTUAL_BUG_ON(x < PAGE_OFFSET || (system_state != SYSTEM_BOOTING &&
+ is_vmalloc_addr((void *)x)));
+ return x - PAGE_OFFSET;
+}
+EXPORT_SYMBOL(__phys_addr);
+#endif
+
#endif
int page_is_ram(unsigned long pagenr)
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 3815e42..87b9ab1 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -26,5 +26,13 @@
config XEN_SAVE_RESTORE
bool
- depends on PM
- default y
\ No newline at end of file
+ depends on XEN && PM
+ default y
+
+config XEN_DEBUG_FS
+ bool "Enable Xen debug and tuning parameters in debugfs"
+ depends on XEN && DEBUG_FS
+ default n
+ help
+ Enable statistics output and various tuning options in debugfs.
+ Enabling this option may incur a significant performance overhead.
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 59c1e53..3139479 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -1,4 +1,12 @@
-obj-y := enlighten.o setup.o multicalls.o mmu.o \
+ifdef CONFIG_FTRACE
+# Do not profile debug and lowlevel utilities
+CFLAGS_REMOVE_spinlock.o = -pg
+CFLAGS_REMOVE_time.o = -pg
+CFLAGS_REMOVE_irq.o = -pg
+endif
+
+obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
time.o xen-asm_$(BITS).o grant-table.o suspend.o
-obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_SMP) += smp.o spinlock.o
+obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
\ No newline at end of file
diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c
new file mode 100644
index 0000000..b53225d
--- /dev/null
+++ b/arch/x86/xen/debugfs.c
@@ -0,0 +1,123 @@
+#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/module.h>
+
+#include "debugfs.h"
+
+static struct dentry *d_xen_debug;
+
+struct dentry * __init xen_init_debugfs(void)
+{
+ if (!d_xen_debug) {
+ d_xen_debug = debugfs_create_dir("xen", NULL);
+
+ if (!d_xen_debug)
+ pr_warning("Could not create 'xen' debugfs directory\n");
+ }
+
+ return d_xen_debug;
+}
+
+struct array_data
+{
+ void *array;
+ unsigned elements;
+};
+
+static int u32_array_open(struct inode *inode, struct file *file)
+{
+ file->private_data = NULL;
+ return nonseekable_open(inode, file);
+}
+
+static size_t format_array(char *buf, size_t bufsize, const char *fmt,
+ u32 *array, unsigned array_size)
+{
+ size_t ret = 0;
+ unsigned i;
+
+ for(i = 0; i < array_size; i++) {
+ size_t len;
+
+ len = snprintf(buf, bufsize, fmt, array[i]);
+ len++; /* ' ' or '\n' */
+ ret += len;
+
+ if (buf) {
+ buf += len;
+ bufsize -= len;
+ buf[-1] = (i == array_size-1) ? '\n' : ' ';
+ }
+ }
+
+ ret++; /* \0 */
+ if (buf)
+ *buf = '\0';
+
+ return ret;
+}
+
+static char *format_array_alloc(const char *fmt, u32 *array, unsigned array_size)
+{
+ size_t len = format_array(NULL, 0, fmt, array, array_size);
+ char *ret;
+
+ ret = kmalloc(len, GFP_KERNEL);
+ if (ret == NULL)
+ return NULL;
+
+ format_array(ret, len, fmt, array, array_size);
+ return ret;
+}
+
+static ssize_t u32_array_read(struct file *file, char __user *buf, size_t len,
+ loff_t *ppos)
+{
+ struct inode *inode = file->f_path.dentry->d_inode;
+ struct array_data *data = inode->i_private;
+ size_t size;
+
+ if (*ppos == 0) {
+ if (file->private_data) {
+ kfree(file->private_data);
+ file->private_data = NULL;
+ }
+
+ file->private_data = format_array_alloc("%u", data->array, data->elements);
+ }
+
+ size = 0;
+ if (file->private_data)
+ size = strlen(file->private_data);
+
+ return simple_read_from_buffer(buf, len, ppos, file->private_data, size);
+}
+
+static int xen_array_release(struct inode *inode, struct file *file)
+{
+ kfree(file->private_data);
+
+ return 0;
+}
+
+static struct file_operations u32_array_fops = {
+ .owner = THIS_MODULE,
+ .open = u32_array_open,
+ .release= xen_array_release,
+ .read = u32_array_read,
+};
+
+struct dentry *xen_debugfs_create_u32_array(const char *name, mode_t mode,
+ struct dentry *parent,
+ u32 *array, unsigned elements)
+{
+ struct array_data *data = kmalloc(sizeof(*data), GFP_KERNEL);
+
+ if (data == NULL)
+ return NULL;
+
+ data->array = array;
+ data->elements = elements;
+
+ return debugfs_create_file(name, mode, parent, data, &u32_array_fops);
+}
diff --git a/arch/x86/xen/debugfs.h b/arch/x86/xen/debugfs.h
new file mode 100644
index 0000000..e281320
--- /dev/null
+++ b/arch/x86/xen/debugfs.h
@@ -0,0 +1,10 @@
+#ifndef _XEN_DEBUGFS_H
+#define _XEN_DEBUGFS_H
+
+struct dentry * __init xen_init_debugfs(void);
+
+struct dentry *xen_debugfs_create_u32_array(const char *name, mode_t mode,
+ struct dentry *parent,
+ u32 *array, unsigned elements);
+
+#endif /* _XEN_DEBUGFS_H */
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index a27d562..0013a72 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -30,7 +30,6 @@
#include <xen/interface/xen.h>
#include <xen/interface/physdev.h>
#include <xen/interface/vcpu.h>
-#include <xen/interface/sched.h>
#include <xen/features.h>
#include <xen/page.h>
#include <xen/hvc-console.h>
@@ -58,6 +57,9 @@
DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
+enum xen_domain_type xen_domain_type = XEN_NATIVE;
+EXPORT_SYMBOL_GPL(xen_domain_type);
+
/*
* Identity map, in addition to plain kernel map. This needs to be
* large enough to allocate page table pages to allocate the rest.
@@ -111,7 +113,14 @@
*
* 0: not available, 1: available
*/
-static int have_vcpu_info_placement = 1;
+static int have_vcpu_info_placement =
+#ifdef CONFIG_X86_32
+ 1
+#else
+ 0
+#endif
+ ;
+
static void xen_vcpu_setup(int cpu)
{
@@ -227,94 +236,6 @@
return HYPERVISOR_get_debugreg(reg);
}
-static unsigned long xen_save_fl(void)
-{
- struct vcpu_info *vcpu;
- unsigned long flags;
-
- vcpu = x86_read_percpu(xen_vcpu);
-
- /* flag has opposite sense of mask */
- flags = !vcpu->evtchn_upcall_mask;
-
- /* convert to IF type flag
- -0 -> 0x00000000
- -1 -> 0xffffffff
- */
- return (-flags) & X86_EFLAGS_IF;
-}
-
-static void xen_restore_fl(unsigned long flags)
-{
- struct vcpu_info *vcpu;
-
- /* convert from IF type flag */
- flags = !(flags & X86_EFLAGS_IF);
-
- /* There's a one instruction preempt window here. We need to
- make sure we're don't switch CPUs between getting the vcpu
- pointer and updating the mask. */
- preempt_disable();
- vcpu = x86_read_percpu(xen_vcpu);
- vcpu->evtchn_upcall_mask = flags;
- preempt_enable_no_resched();
-
- /* Doesn't matter if we get preempted here, because any
- pending event will get dealt with anyway. */
-
- if (flags == 0) {
- preempt_check_resched();
- barrier(); /* unmask then check (avoid races) */
- if (unlikely(vcpu->evtchn_upcall_pending))
- force_evtchn_callback();
- }
-}
-
-static void xen_irq_disable(void)
-{
- /* There's a one instruction preempt window here. We need to
- make sure we're don't switch CPUs between getting the vcpu
- pointer and updating the mask. */
- preempt_disable();
- x86_read_percpu(xen_vcpu)->evtchn_upcall_mask = 1;
- preempt_enable_no_resched();
-}
-
-static void xen_irq_enable(void)
-{
- struct vcpu_info *vcpu;
-
- /* We don't need to worry about being preempted here, since
- either a) interrupts are disabled, so no preemption, or b)
- the caller is confused and is trying to re-enable interrupts
- on an indeterminate processor. */
-
- vcpu = x86_read_percpu(xen_vcpu);
- vcpu->evtchn_upcall_mask = 0;
-
- /* Doesn't matter if we get preempted here, because any
- pending event will get dealt with anyway. */
-
- barrier(); /* unmask then check (avoid races) */
- if (unlikely(vcpu->evtchn_upcall_pending))
- force_evtchn_callback();
-}
-
-static void xen_safe_halt(void)
-{
- /* Blocking includes an implicit local_irq_enable(). */
- if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0)
- BUG();
-}
-
-static void xen_halt(void)
-{
- if (irqs_disabled())
- HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
- else
- xen_safe_halt();
-}
-
static void xen_leave_lazy(void)
{
paravirt_leave_lazy(paravirt_get_lazy_mode());
@@ -326,6 +247,59 @@
return 0;
}
+/*
+ * Set the page permissions for a particular virtual address. If the
+ * address is a vmalloc mapping (or other non-linear mapping), then
+ * find the linear mapping of the page and also set its protections to
+ * match.
+ */
+static void set_aliased_prot(void *v, pgprot_t prot)
+{
+ int level;
+ pte_t *ptep;
+ pte_t pte;
+ unsigned long pfn;
+ struct page *page;
+
+ ptep = lookup_address((unsigned long)v, &level);
+ BUG_ON(ptep == NULL);
+
+ pfn = pte_pfn(*ptep);
+ page = pfn_to_page(pfn);
+
+ pte = pfn_pte(pfn, prot);
+
+ if (HYPERVISOR_update_va_mapping((unsigned long)v, pte, 0))
+ BUG();
+
+ if (!PageHighMem(page)) {
+ void *av = __va(PFN_PHYS(pfn));
+
+ if (av != v)
+ if (HYPERVISOR_update_va_mapping((unsigned long)av, pte, 0))
+ BUG();
+ } else
+ kmap_flush_unused();
+}
+
+static void xen_alloc_ldt(struct desc_struct *ldt, unsigned entries)
+{
+ const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
+ int i;
+
+ for(i = 0; i < entries; i += entries_per_page)
+ set_aliased_prot(ldt + i, PAGE_KERNEL_RO);
+}
+
+static void xen_free_ldt(struct desc_struct *ldt, unsigned entries)
+{
+ const unsigned entries_per_page = PAGE_SIZE / LDT_ENTRY_SIZE;
+ int i;
+
+ for(i = 0; i < entries; i += entries_per_page)
+ set_aliased_prot(ldt + i, PAGE_KERNEL);
+}
+
static void xen_set_ldt(const void *addr, unsigned entries)
{
struct mmuext_op *op;
@@ -426,8 +400,7 @@
static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
const void *ptr)
{
- unsigned long lp = (unsigned long)&dt[entrynum];
- xmaddr_t mach_lp = virt_to_machine(lp);
+ xmaddr_t mach_lp = arbitrary_virt_to_machine(&dt[entrynum]);
u64 entry = *(u64 *)ptr;
preempt_disable();
@@ -560,7 +533,7 @@
}
static void xen_load_sp0(struct tss_struct *tss,
- struct thread_struct *thread)
+ struct thread_struct *thread)
{
struct multicall_space mcs = xen_mc_entry(0);
MULTI_stack_switch(mcs.mc, __KERNEL_DS, thread->sp0);
@@ -835,6 +808,19 @@
ret = -EFAULT;
break;
#endif
+
+ case MSR_STAR:
+ case MSR_CSTAR:
+ case MSR_LSTAR:
+ case MSR_SYSCALL_MASK:
+ case MSR_IA32_SYSENTER_CS:
+ case MSR_IA32_SYSENTER_ESP:
+ case MSR_IA32_SYSENTER_EIP:
+ /* Fast syscall setup is all done in hypercalls, so
+ these are all ignored. Stub them out here to stop
+ Xen console noise. */
+ break;
+
default:
ret = native_write_msr_safe(msr, low, high);
}
@@ -878,8 +864,8 @@
SetPagePinned(page);
if (!PageHighMem(page)) {
- make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
- if (level == PT_PTE)
+ make_lowmem_page_readonly(__va(PFN_PHYS((unsigned long)pfn)));
+ if (level == PT_PTE && USE_SPLIT_PTLOCKS)
pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
} else
/* make sure there are no stray mappings of
@@ -947,7 +933,7 @@
if (PagePinned(page)) {
if (!PageHighMem(page)) {
- if (level == PT_PTE)
+ if (level == PT_PTE && USE_SPLIT_PTLOCKS)
pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
@@ -994,6 +980,7 @@
}
#endif
+#ifdef CONFIG_X86_32
static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
{
/* If there's an existing pte, then don't allow _PAGE_RW to be set */
@@ -1012,6 +999,7 @@
xen_set_pte(ptep, pte);
}
+#endif
static __init void xen_pagetable_setup_start(pgd_t *base)
{
@@ -1078,7 +1066,6 @@
/* xen_vcpu_setup managed to place the vcpu_info within the
percpu area for all cpus, so make use of it */
-#ifdef CONFIG_X86_32
if (have_vcpu_info_placement) {
printk(KERN_INFO "Xen: using vcpu_info placement\n");
@@ -1088,7 +1075,6 @@
pv_irq_ops.irq_enable = xen_irq_enable_direct;
pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
}
-#endif
}
static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
@@ -1109,12 +1095,10 @@
goto patch_site
switch (type) {
-#ifdef CONFIG_X86_32
SITE(pv_irq_ops, irq_enable);
SITE(pv_irq_ops, irq_disable);
SITE(pv_irq_ops, save_fl);
SITE(pv_irq_ops, restore_fl);
-#endif /* CONFIG_X86_32 */
#undef SITE
patch_site:
@@ -1252,6 +1236,9 @@
.load_gs_index = xen_load_gs_index,
#endif
+ .alloc_ldt = xen_alloc_ldt,
+ .free_ldt = xen_free_ldt,
+
.store_gdt = native_store_gdt,
.store_idt = native_store_idt,
.store_tr = xen_store_tr,
@@ -1273,36 +1260,6 @@
},
};
-static void __init __xen_init_IRQ(void)
-{
-#ifdef CONFIG_X86_64
- int i;
-
- /* Create identity vector->irq map */
- for(i = 0; i < NR_VECTORS; i++) {
- int cpu;
-
- for_each_possible_cpu(cpu)
- per_cpu(vector_irq, cpu)[i] = i;
- }
-#endif /* CONFIG_X86_64 */
-
- xen_init_IRQ();
-}
-
-static const struct pv_irq_ops xen_irq_ops __initdata = {
- .init_IRQ = __xen_init_IRQ,
- .save_fl = xen_save_fl,
- .restore_fl = xen_restore_fl,
- .irq_disable = xen_irq_disable,
- .irq_enable = xen_irq_enable,
- .safe_halt = xen_safe_halt,
- .halt = xen_halt,
-#ifdef CONFIG_X86_64
- .adjust_exception_frame = xen_adjust_exception_frame,
-#endif
-};
-
static const struct pv_apic_ops xen_apic_ops __initdata = {
#ifdef CONFIG_X86_LOCAL_APIC
.setup_boot_clock = paravirt_nop,
@@ -1443,7 +1400,7 @@
if (HYPERVISOR_xen_version(XENVER_platform_parameters, &pp) == 0)
top = pp.virt_start;
- reserve_top_address(-top + 2 * PAGE_SIZE);
+ reserve_top_address(-top);
#endif /* CONFIG_X86_32 */
}
@@ -1477,48 +1434,11 @@
return __ka(m2p(maddr));
}
-#ifdef CONFIG_X86_64
-static void walk(pgd_t *pgd, unsigned long addr)
-{
- unsigned l4idx = pgd_index(addr);
- unsigned l3idx = pud_index(addr);
- unsigned l2idx = pmd_index(addr);
- unsigned l1idx = pte_index(addr);
- pgd_t l4;
- pud_t l3;
- pmd_t l2;
- pte_t l1;
-
- xen_raw_printk("walk %p, %lx -> %d %d %d %d\n",
- pgd, addr, l4idx, l3idx, l2idx, l1idx);
-
- l4 = pgd[l4idx];
- xen_raw_printk(" l4: %016lx\n", l4.pgd);
- xen_raw_printk(" %016lx\n", pgd_val(l4));
-
- l3 = ((pud_t *)(m2v(l4.pgd)))[l3idx];
- xen_raw_printk(" l3: %016lx\n", l3.pud);
- xen_raw_printk(" %016lx\n", pud_val(l3));
-
- l2 = ((pmd_t *)(m2v(l3.pud)))[l2idx];
- xen_raw_printk(" l2: %016lx\n", l2.pmd);
- xen_raw_printk(" %016lx\n", pmd_val(l2));
-
- l1 = ((pte_t *)(m2v(l2.pmd)))[l1idx];
- xen_raw_printk(" l1: %016lx\n", l1.pte);
- xen_raw_printk(" %016lx\n", pte_val(l1));
-}
-#endif
-
static void set_page_prot(void *addr, pgprot_t prot)
{
unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
pte_t pte = pfn_pte(pfn, prot);
- xen_raw_printk("addr=%p pfn=%lx mfn=%lx prot=%016llx pte=%016llx\n",
- addr, pfn, get_phys_to_machine(pfn),
- pgprot_val(prot), pte.pte);
-
if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
BUG();
}
@@ -1694,6 +1614,8 @@
if (!xen_start_info)
return;
+ xen_domain_type = XEN_PV_DOMAIN;
+
BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0);
xen_setup_features();
@@ -1703,10 +1625,11 @@
pv_init_ops = xen_init_ops;
pv_time_ops = xen_time_ops;
pv_cpu_ops = xen_cpu_ops;
- pv_irq_ops = xen_irq_ops;
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;
+ xen_init_irq_ops();
+
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
@@ -1737,7 +1660,7 @@
/* Prevent unwanted bits from being set in PTEs. */
__supported_pte_mask &= ~_PAGE_GLOBAL;
- if (!is_initial_xendomain())
+ if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
/* Don't do the full vcpu_info placement stuff until we have a
@@ -1772,7 +1695,7 @@
boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
- if (!is_initial_xendomain()) {
+ if (!xen_initial_domain()) {
add_preferred_console("xenboot", 0, NULL);
add_preferred_console("tty", 0, NULL);
add_preferred_console("hvc", 0, NULL);
@@ -1780,15 +1703,6 @@
xen_raw_console_write("about to get started...\n");
-#if 0
- xen_raw_printk("&boot_params=%p __pa(&boot_params)=%lx __va(__pa(&boot_params))=%lx\n",
- &boot_params, __pa_symbol(&boot_params),
- __va(__pa_symbol(&boot_params)));
-
- walk(pgd, &boot_params);
- walk(pgd, __va(__pa(&boot_params)));
-#endif
-
/* Start the world */
#ifdef CONFIG_X86_32
i386_start_kernel();
diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c
new file mode 100644
index 0000000..28b85ab
--- /dev/null
+++ b/arch/x86/xen/irq.c
@@ -0,0 +1,143 @@
+#include <linux/hardirq.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/sched.h>
+#include <xen/interface/vcpu.h>
+
+#include <asm/xen/hypercall.h>
+#include <asm/xen/hypervisor.h>
+
+#include "xen-ops.h"
+
+/*
+ * Force a proper event-channel callback from Xen after clearing the
+ * callback mask. We do this in a very simple manner, by making a call
+ * down into Xen. The pending flag will be checked by Xen on return.
+ */
+void xen_force_evtchn_callback(void)
+{
+ (void)HYPERVISOR_xen_version(0, NULL);
+}
+
+static void __init __xen_init_IRQ(void)
+{
+#ifdef CONFIG_X86_64
+ int i;
+
+ /* Create identity vector->irq map */
+ for(i = 0; i < NR_VECTORS; i++) {
+ int cpu;
+
+ for_each_possible_cpu(cpu)
+ per_cpu(vector_irq, cpu)[i] = i;
+ }
+#endif /* CONFIG_X86_64 */
+
+ xen_init_IRQ();
+}
+
+static unsigned long xen_save_fl(void)
+{
+ struct vcpu_info *vcpu;
+ unsigned long flags;
+
+ vcpu = x86_read_percpu(xen_vcpu);
+
+ /* flag has opposite sense of mask */
+ flags = !vcpu->evtchn_upcall_mask;
+
+ /* convert to IF type flag
+ -0 -> 0x00000000
+ -1 -> 0xffffffff
+ */
+ return (-flags) & X86_EFLAGS_IF;
+}
+
+static void xen_restore_fl(unsigned long flags)
+{
+ struct vcpu_info *vcpu;
+
+ /* convert from IF type flag */
+ flags = !(flags & X86_EFLAGS_IF);
+
+ /* There's a one instruction preempt window here. We need to
+ make sure we're don't switch CPUs between getting the vcpu
+ pointer and updating the mask. */
+ preempt_disable();
+ vcpu = x86_read_percpu(xen_vcpu);
+ vcpu->evtchn_upcall_mask = flags;
+ preempt_enable_no_resched();
+
+ /* Doesn't matter if we get preempted here, because any
+ pending event will get dealt with anyway. */
+
+ if (flags == 0) {
+ preempt_check_resched();
+ barrier(); /* unmask then check (avoid races) */
+ if (unlikely(vcpu->evtchn_upcall_pending))
+ xen_force_evtchn_callback();
+ }
+}
+
+static void xen_irq_disable(void)
+{
+ /* There's a one instruction preempt window here. We need to
+ make sure we're don't switch CPUs between getting the vcpu
+ pointer and updating the mask. */
+ preempt_disable();
+ x86_read_percpu(xen_vcpu)->evtchn_upcall_mask = 1;
+ preempt_enable_no_resched();
+}
+
+static void xen_irq_enable(void)
+{
+ struct vcpu_info *vcpu;
+
+ /* We don't need to worry about being preempted here, since
+ either a) interrupts are disabled, so no preemption, or b)
+ the caller is confused and is trying to re-enable interrupts
+ on an indeterminate processor. */
+
+ vcpu = x86_read_percpu(xen_vcpu);
+ vcpu->evtchn_upcall_mask = 0;
+
+ /* Doesn't matter if we get preempted here, because any
+ pending event will get dealt with anyway. */
+
+ barrier(); /* unmask then check (avoid races) */
+ if (unlikely(vcpu->evtchn_upcall_pending))
+ xen_force_evtchn_callback();
+}
+
+static void xen_safe_halt(void)
+{
+ /* Blocking includes an implicit local_irq_enable(). */
+ if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0)
+ BUG();
+}
+
+static void xen_halt(void)
+{
+ if (irqs_disabled())
+ HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
+ else
+ xen_safe_halt();
+}
+
+static const struct pv_irq_ops xen_irq_ops __initdata = {
+ .init_IRQ = __xen_init_IRQ,
+ .save_fl = xen_save_fl,
+ .restore_fl = xen_restore_fl,
+ .irq_disable = xen_irq_disable,
+ .irq_enable = xen_irq_enable,
+ .safe_halt = xen_safe_halt,
+ .halt = xen_halt,
+#ifdef CONFIG_X86_64
+ .adjust_exception_frame = xen_adjust_exception_frame,
+#endif
+};
+
+void __init xen_init_irq_ops()
+{
+ pv_irq_ops = xen_irq_ops;
+}
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index aa37469..ae173f6 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -40,6 +40,7 @@
*/
#include <linux/sched.h>
#include <linux/highmem.h>
+#include <linux/debugfs.h>
#include <linux/bug.h>
#include <asm/pgtable.h>
@@ -57,6 +58,61 @@
#include "multicalls.h"
#include "mmu.h"
+#include "debugfs.h"
+
+#define MMU_UPDATE_HISTO 30
+
+#ifdef CONFIG_XEN_DEBUG_FS
+
+static struct {
+ u32 pgd_update;
+ u32 pgd_update_pinned;
+ u32 pgd_update_batched;
+
+ u32 pud_update;
+ u32 pud_update_pinned;
+ u32 pud_update_batched;
+
+ u32 pmd_update;
+ u32 pmd_update_pinned;
+ u32 pmd_update_batched;
+
+ u32 pte_update;
+ u32 pte_update_pinned;
+ u32 pte_update_batched;
+
+ u32 mmu_update;
+ u32 mmu_update_extended;
+ u32 mmu_update_histo[MMU_UPDATE_HISTO];
+
+ u32 prot_commit;
+ u32 prot_commit_batched;
+
+ u32 set_pte_at;
+ u32 set_pte_at_batched;
+ u32 set_pte_at_pinned;
+ u32 set_pte_at_current;
+ u32 set_pte_at_kernel;
+} mmu_stats;
+
+static u8 zero_stats;
+
+static inline void check_zero(void)
+{
+ if (unlikely(zero_stats)) {
+ memset(&mmu_stats, 0, sizeof(mmu_stats));
+ zero_stats = 0;
+ }
+}
+
+#define ADD_STATS(elem, val) \
+ do { check_zero(); mmu_stats.elem += (val); } while(0)
+
+#else /* !CONFIG_XEN_DEBUG_FS */
+
+#define ADD_STATS(elem, val) do { (void)(val); } while(0)
+
+#endif /* CONFIG_XEN_DEBUG_FS */
/*
* Just beyond the highest usermode address. STACK_TOP_MAX has a
@@ -229,25 +285,35 @@
}
-static bool page_pinned(void *ptr)
+static bool xen_page_pinned(void *ptr)
{
struct page *page = virt_to_page(ptr);
return PagePinned(page);
}
-static void extend_mmu_update(const struct mmu_update *update)
+static void xen_extend_mmu_update(const struct mmu_update *update)
{
struct multicall_space mcs;
struct mmu_update *u;
mcs = xen_mc_extend_args(__HYPERVISOR_mmu_update, sizeof(*u));
- if (mcs.mc != NULL)
+ if (mcs.mc != NULL) {
+ ADD_STATS(mmu_update_extended, 1);
+ ADD_STATS(mmu_update_histo[mcs.mc->args[1]], -1);
+
mcs.mc->args[1]++;
- else {
+
+ if (mcs.mc->args[1] < MMU_UPDATE_HISTO)
+ ADD_STATS(mmu_update_histo[mcs.mc->args[1]], 1);
+ else
+ ADD_STATS(mmu_update_histo[0], 1);
+ } else {
+ ADD_STATS(mmu_update, 1);
mcs = __xen_mc_entry(sizeof(*u));
MULTI_mmu_update(mcs.mc, mcs.args, 1, NULL, DOMID_SELF);
+ ADD_STATS(mmu_update_histo[1], 1);
}
u = mcs.args;
@@ -265,7 +331,9 @@
/* ptr may be ioremapped for 64-bit pagetable setup */
u.ptr = arbitrary_virt_to_machine(ptr).maddr;
u.val = pmd_val_ma(val);
- extend_mmu_update(&u);
+ xen_extend_mmu_update(&u);
+
+ ADD_STATS(pmd_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
xen_mc_issue(PARAVIRT_LAZY_MMU);
@@ -274,13 +342,17 @@
void xen_set_pmd(pmd_t *ptr, pmd_t val)
{
+ ADD_STATS(pmd_update, 1);
+
/* If page is not pinned, we can just update the entry
directly */
- if (!page_pinned(ptr)) {
+ if (!xen_page_pinned(ptr)) {
*ptr = val;
return;
}
+ ADD_STATS(pmd_update_pinned, 1);
+
xen_set_pmd_hyper(ptr, val);
}
@@ -300,12 +372,18 @@
if (mm == &init_mm)
preempt_disable();
+ ADD_STATS(set_pte_at, 1);
+// ADD_STATS(set_pte_at_pinned, xen_page_pinned(ptep));
+ ADD_STATS(set_pte_at_current, mm == current->mm);
+ ADD_STATS(set_pte_at_kernel, mm == &init_mm);
+
if (mm == current->mm || mm == &init_mm) {
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) {
struct multicall_space mcs;
mcs = xen_mc_entry(0);
MULTI_update_va_mapping(mcs.mc, addr, pteval, 0);
+ ADD_STATS(set_pte_at_batched, 1);
xen_mc_issue(PARAVIRT_LAZY_MMU);
goto out;
} else
@@ -334,7 +412,10 @@
u.ptr = virt_to_machine(ptep).maddr | MMU_PT_UPDATE_PRESERVE_AD;
u.val = pte_val_ma(pte);
- extend_mmu_update(&u);
+ xen_extend_mmu_update(&u);
+
+ ADD_STATS(prot_commit, 1);
+ ADD_STATS(prot_commit_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
xen_mc_issue(PARAVIRT_LAZY_MMU);
}
@@ -400,7 +481,9 @@
/* ptr may be ioremapped for 64-bit pagetable setup */
u.ptr = arbitrary_virt_to_machine(ptr).maddr;
u.val = pud_val_ma(val);
- extend_mmu_update(&u);
+ xen_extend_mmu_update(&u);
+
+ ADD_STATS(pud_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
xen_mc_issue(PARAVIRT_LAZY_MMU);
@@ -409,18 +492,26 @@
void xen_set_pud(pud_t *ptr, pud_t val)
{
+ ADD_STATS(pud_update, 1);
+
/* If page is not pinned, we can just update the entry
directly */
- if (!page_pinned(ptr)) {
+ if (!xen_page_pinned(ptr)) {
*ptr = val;
return;
}
+ ADD_STATS(pud_update_pinned, 1);
+
xen_set_pud_hyper(ptr, val);
}
void xen_set_pte(pte_t *ptep, pte_t pte)
{
+ ADD_STATS(pte_update, 1);
+// ADD_STATS(pte_update_pinned, xen_page_pinned(ptep));
+ ADD_STATS(pte_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
+
#ifdef CONFIG_X86_PAE
ptep->pte_high = pte.pte_high;
smp_wmb();
@@ -490,7 +581,7 @@
u.ptr = virt_to_machine(ptr).maddr;
u.val = pgd_val_ma(val);
- extend_mmu_update(&u);
+ xen_extend_mmu_update(&u);
}
/*
@@ -517,17 +608,22 @@
{
pgd_t *user_ptr = xen_get_user_pgd(ptr);
+ ADD_STATS(pgd_update, 1);
+
/* If page is not pinned, we can just update the entry
directly */
- if (!page_pinned(ptr)) {
+ if (!xen_page_pinned(ptr)) {
*ptr = val;
if (user_ptr) {
- WARN_ON(page_pinned(user_ptr));
+ WARN_ON(xen_page_pinned(user_ptr));
*user_ptr = val;
}
return;
}
+ ADD_STATS(pgd_update_pinned, 1);
+ ADD_STATS(pgd_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU);
+
/* If it's pinned, then we can at least batch the kernel and
user updates together. */
xen_mc_batch();
@@ -555,9 +651,12 @@
* For 64-bit, we must skip the Xen hole in the middle of the address
* space, just after the big x86-64 virtual hole.
*/
-static int pgd_walk(pgd_t *pgd, int (*func)(struct page *, enum pt_level),
- unsigned long limit)
+static int xen_pgd_walk(struct mm_struct *mm,
+ int (*func)(struct mm_struct *mm, struct page *,
+ enum pt_level),
+ unsigned long limit)
{
+ pgd_t *pgd = mm->pgd;
int flush = 0;
unsigned hole_low, hole_high;
unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
@@ -590,8 +689,6 @@
pmdidx_limit = 0;
#endif
- flush |= (*func)(virt_to_page(pgd), PT_PGD);
-
for (pgdidx = 0; pgdidx <= pgdidx_limit; pgdidx++) {
pud_t *pud;
@@ -604,7 +701,7 @@
pud = pud_offset(&pgd[pgdidx], 0);
if (PTRS_PER_PUD > 1) /* not folded */
- flush |= (*func)(virt_to_page(pud), PT_PUD);
+ flush |= (*func)(mm, virt_to_page(pud), PT_PUD);
for (pudidx = 0; pudidx < PTRS_PER_PUD; pudidx++) {
pmd_t *pmd;
@@ -619,7 +716,7 @@
pmd = pmd_offset(&pud[pudidx], 0);
if (PTRS_PER_PMD > 1) /* not folded */
- flush |= (*func)(virt_to_page(pmd), PT_PMD);
+ flush |= (*func)(mm, virt_to_page(pmd), PT_PMD);
for (pmdidx = 0; pmdidx < PTRS_PER_PMD; pmdidx++) {
struct page *pte;
@@ -633,28 +730,34 @@
continue;
pte = pmd_page(pmd[pmdidx]);
- flush |= (*func)(pte, PT_PTE);
+ flush |= (*func)(mm, pte, PT_PTE);
}
}
}
+
out:
+ /* Do the top level last, so that the callbacks can use it as
+ a cue to do final things like tlb flushes. */
+ flush |= (*func)(mm, virt_to_page(pgd), PT_PGD);
return flush;
}
-static spinlock_t *lock_pte(struct page *page)
+/* If we're using split pte locks, then take the page's lock and
+ return a pointer to it. Otherwise return NULL. */
+static spinlock_t *xen_pte_lock(struct page *page, struct mm_struct *mm)
{
spinlock_t *ptl = NULL;
-#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
+#if USE_SPLIT_PTLOCKS
ptl = __pte_lockptr(page);
- spin_lock(ptl);
+ spin_lock_nest_lock(ptl, &mm->page_table_lock);
#endif
return ptl;
}
-static void do_unlock(void *v)
+static void xen_pte_unlock(void *v)
{
spinlock_t *ptl = v;
spin_unlock(ptl);
@@ -672,7 +775,8 @@
MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
}
-static int pin_page(struct page *page, enum pt_level level)
+static int xen_pin_page(struct mm_struct *mm, struct page *page,
+ enum pt_level level)
{
unsigned pgfl = TestSetPagePinned(page);
int flush;
@@ -691,21 +795,40 @@
flush = 0;
+ /*
+ * We need to hold the pagetable lock between the time
+ * we make the pagetable RO and when we actually pin
+ * it. If we don't, then other users may come in and
+ * attempt to update the pagetable by writing it,
+ * which will fail because the memory is RO but not
+ * pinned, so Xen won't do the trap'n'emulate.
+ *
+ * If we're using split pte locks, we can't hold the
+ * entire pagetable's worth of locks during the
+ * traverse, because we may wrap the preempt count (8
+ * bits). The solution is to mark RO and pin each PTE
+ * page while holding the lock. This means the number
+ * of locks we end up holding is never more than a
+ * batch size (~32 entries, at present).
+ *
+ * If we're not using split pte locks, we needn't pin
+ * the PTE pages independently, because we're
+ * protected by the overall pagetable lock.
+ */
ptl = NULL;
if (level == PT_PTE)
- ptl = lock_pte(page);
+ ptl = xen_pte_lock(page, mm);
MULTI_update_va_mapping(mcs.mc, (unsigned long)pt,
pfn_pte(pfn, PAGE_KERNEL_RO),
level == PT_PGD ? UVMF_TLB_FLUSH : 0);
- if (level == PT_PTE)
+ if (ptl) {
xen_do_pin(MMUEXT_PIN_L1_TABLE, pfn);
- if (ptl) {
/* Queue a deferred unlock for when this batch
is completed. */
- xen_mc_callback(do_unlock, ptl);
+ xen_mc_callback(xen_pte_unlock, ptl);
}
}
@@ -715,11 +838,11 @@
/* This is called just after a mm has been created, but it has not
been used yet. We need to make sure that its pagetable is all
read-only, and can be pinned. */
-void xen_pgd_pin(pgd_t *pgd)
+static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd)
{
xen_mc_batch();
- if (pgd_walk(pgd, pin_page, USER_LIMIT)) {
+ if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) {
/* re-enable interrupts for kmap_flush_unused */
xen_mc_issue(0);
kmap_flush_unused();
@@ -733,25 +856,35 @@
xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(pgd)));
if (user_pgd) {
- pin_page(virt_to_page(user_pgd), PT_PGD);
+ xen_pin_page(mm, virt_to_page(user_pgd), PT_PGD);
xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(user_pgd)));
}
}
#else /* CONFIG_X86_32 */
#ifdef CONFIG_X86_PAE
/* Need to make sure unshared kernel PMD is pinnable */
- pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+ xen_pin_page(mm, virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])),
+ PT_PMD);
#endif
xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd)));
#endif /* CONFIG_X86_64 */
xen_mc_issue(0);
}
+static void xen_pgd_pin(struct mm_struct *mm)
+{
+ __xen_pgd_pin(mm, mm->pgd);
+}
+
/*
* On save, we need to pin all pagetables to make sure they get their
* mfns turned into pfns. Search the list for any unpinned pgds and pin
* them (unpinned pgds are not currently in use, probably because the
* process is under construction or destruction).
+ *
+ * Expected to be called in stop_machine() ("equivalent to taking
+ * every spinlock in the system"), so the locking doesn't really
+ * matter all that much.
*/
void xen_mm_pin_all(void)
{
@@ -762,7 +895,7 @@
list_for_each_entry(page, &pgd_list, lru) {
if (!PagePinned(page)) {
- xen_pgd_pin((pgd_t *)page_address(page));
+ __xen_pgd_pin(&init_mm, (pgd_t *)page_address(page));
SetPageSavePinned(page);
}
}
@@ -775,7 +908,8 @@
* that's before we have page structures to store the bits. So do all
* the book-keeping now.
*/
-static __init int mark_pinned(struct page *page, enum pt_level level)
+static __init int xen_mark_pinned(struct mm_struct *mm, struct page *page,
+ enum pt_level level)
{
SetPagePinned(page);
return 0;
@@ -783,10 +917,11 @@
void __init xen_mark_init_mm_pinned(void)
{
- pgd_walk(init_mm.pgd, mark_pinned, FIXADDR_TOP);
+ xen_pgd_walk(&init_mm, xen_mark_pinned, FIXADDR_TOP);
}
-static int unpin_page(struct page *page, enum pt_level level)
+static int xen_unpin_page(struct mm_struct *mm, struct page *page,
+ enum pt_level level)
{
unsigned pgfl = TestClearPagePinned(page);
@@ -796,10 +931,18 @@
spinlock_t *ptl = NULL;
struct multicall_space mcs;
+ /*
+ * Do the converse to pin_page. If we're using split
+ * pte locks, we must be holding the lock for while
+ * the pte page is unpinned but still RO to prevent
+ * concurrent updates from seeing it in this
+ * partially-pinned state.
+ */
if (level == PT_PTE) {
- ptl = lock_pte(page);
+ ptl = xen_pte_lock(page, mm);
- xen_do_pin(MMUEXT_UNPIN_TABLE, pfn);
+ if (ptl)
+ xen_do_pin(MMUEXT_UNPIN_TABLE, pfn);
}
mcs = __xen_mc_entry(0);
@@ -810,7 +953,7 @@
if (ptl) {
/* unlock when batch completed */
- xen_mc_callback(do_unlock, ptl);
+ xen_mc_callback(xen_pte_unlock, ptl);
}
}
@@ -818,7 +961,7 @@
}
/* Release a pagetables pages back as normal RW */
-static void xen_pgd_unpin(pgd_t *pgd)
+static void __xen_pgd_unpin(struct mm_struct *mm, pgd_t *pgd)
{
xen_mc_batch();
@@ -830,21 +973,27 @@
if (user_pgd) {
xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(user_pgd)));
- unpin_page(virt_to_page(user_pgd), PT_PGD);
+ xen_unpin_page(mm, virt_to_page(user_pgd), PT_PGD);
}
}
#endif
#ifdef CONFIG_X86_PAE
/* Need to make sure unshared kernel PMD is unpinned */
- pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+ xen_unpin_page(mm, virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])),
+ PT_PMD);
#endif
- pgd_walk(pgd, unpin_page, USER_LIMIT);
+ xen_pgd_walk(mm, xen_unpin_page, USER_LIMIT);
xen_mc_issue(0);
}
+static void xen_pgd_unpin(struct mm_struct *mm)
+{
+ __xen_pgd_unpin(mm, mm->pgd);
+}
+
/*
* On resume, undo any pinning done at save, so that the rest of the
* kernel doesn't see any unexpected pinned pagetables.
@@ -859,7 +1008,7 @@
list_for_each_entry(page, &pgd_list, lru) {
if (PageSavePinned(page)) {
BUG_ON(!PagePinned(page));
- xen_pgd_unpin((pgd_t *)page_address(page));
+ __xen_pgd_unpin(&init_mm, (pgd_t *)page_address(page));
ClearPageSavePinned(page);
}
}
@@ -870,14 +1019,14 @@
void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next)
{
spin_lock(&next->page_table_lock);
- xen_pgd_pin(next->pgd);
+ xen_pgd_pin(next);
spin_unlock(&next->page_table_lock);
}
void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm)
{
spin_lock(&mm->page_table_lock);
- xen_pgd_pin(mm->pgd);
+ xen_pgd_pin(mm);
spin_unlock(&mm->page_table_lock);
}
@@ -907,7 +1056,7 @@
}
}
-static void drop_mm_ref(struct mm_struct *mm)
+static void xen_drop_mm_ref(struct mm_struct *mm)
{
cpumask_t mask;
unsigned cpu;
@@ -937,7 +1086,7 @@
smp_call_function_mask(mask, drop_other_mm_ref, mm, 1);
}
#else
-static void drop_mm_ref(struct mm_struct *mm)
+static void xen_drop_mm_ref(struct mm_struct *mm)
{
if (current->active_mm == mm)
load_cr3(swapper_pg_dir);
@@ -961,14 +1110,77 @@
void xen_exit_mmap(struct mm_struct *mm)
{
get_cpu(); /* make sure we don't move around */
- drop_mm_ref(mm);
+ xen_drop_mm_ref(mm);
put_cpu();
spin_lock(&mm->page_table_lock);
/* pgd may not be pinned in the error exit path of execve */
- if (page_pinned(mm->pgd))
- xen_pgd_unpin(mm->pgd);
+ if (xen_page_pinned(mm->pgd))
+ xen_pgd_unpin(mm);
spin_unlock(&mm->page_table_lock);
}
+
+#ifdef CONFIG_XEN_DEBUG_FS
+
+static struct dentry *d_mmu_debug;
+
+static int __init xen_mmu_debugfs(void)
+{
+ struct dentry *d_xen = xen_init_debugfs();
+
+ if (d_xen == NULL)
+ return -ENOMEM;
+
+ d_mmu_debug = debugfs_create_dir("mmu", d_xen);
+
+ debugfs_create_u8("zero_stats", 0644, d_mmu_debug, &zero_stats);
+
+ debugfs_create_u32("pgd_update", 0444, d_mmu_debug, &mmu_stats.pgd_update);
+ debugfs_create_u32("pgd_update_pinned", 0444, d_mmu_debug,
+ &mmu_stats.pgd_update_pinned);
+ debugfs_create_u32("pgd_update_batched", 0444, d_mmu_debug,
+ &mmu_stats.pgd_update_pinned);
+
+ debugfs_create_u32("pud_update", 0444, d_mmu_debug, &mmu_stats.pud_update);
+ debugfs_create_u32("pud_update_pinned", 0444, d_mmu_debug,
+ &mmu_stats.pud_update_pinned);
+ debugfs_create_u32("pud_update_batched", 0444, d_mmu_debug,
+ &mmu_stats.pud_update_pinned);
+
+ debugfs_create_u32("pmd_update", 0444, d_mmu_debug, &mmu_stats.pmd_update);
+ debugfs_create_u32("pmd_update_pinned", 0444, d_mmu_debug,
+ &mmu_stats.pmd_update_pinned);
+ debugfs_create_u32("pmd_update_batched", 0444, d_mmu_debug,
+ &mmu_stats.pmd_update_pinned);
+
+ debugfs_create_u32("pte_update", 0444, d_mmu_debug, &mmu_stats.pte_update);
+// debugfs_create_u32("pte_update_pinned", 0444, d_mmu_debug,
+// &mmu_stats.pte_update_pinned);
+ debugfs_create_u32("pte_update_batched", 0444, d_mmu_debug,
+ &mmu_stats.pte_update_pinned);
+
+ debugfs_create_u32("mmu_update", 0444, d_mmu_debug, &mmu_stats.mmu_update);
+ debugfs_create_u32("mmu_update_extended", 0444, d_mmu_debug,
+ &mmu_stats.mmu_update_extended);
+ xen_debugfs_create_u32_array("mmu_update_histo", 0444, d_mmu_debug,
+ mmu_stats.mmu_update_histo, 20);
+
+ debugfs_create_u32("set_pte_at", 0444, d_mmu_debug, &mmu_stats.set_pte_at);
+ debugfs_create_u32("set_pte_at_batched", 0444, d_mmu_debug,
+ &mmu_stats.set_pte_at_batched);
+ debugfs_create_u32("set_pte_at_current", 0444, d_mmu_debug,
+ &mmu_stats.set_pte_at_current);
+ debugfs_create_u32("set_pte_at_kernel", 0444, d_mmu_debug,
+ &mmu_stats.set_pte_at_kernel);
+
+ debugfs_create_u32("prot_commit", 0444, d_mmu_debug, &mmu_stats.prot_commit);
+ debugfs_create_u32("prot_commit_batched", 0444, d_mmu_debug,
+ &mmu_stats.prot_commit_batched);
+
+ return 0;
+}
+fs_initcall(xen_mmu_debugfs);
+
+#endif /* CONFIG_XEN_DEBUG_FS */
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index 0f59bd0..98d7165 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -18,9 +18,6 @@
void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm);
void xen_exit_mmap(struct mm_struct *mm);
-void xen_pgd_pin(pgd_t *pgd);
-//void xen_pgd_unpin(pgd_t *pgd);
-
pteval_t xen_pte_val(pte_t);
pmdval_t xen_pmd_val(pmd_t);
pgdval_t xen_pgd_val(pgd_t);
diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 9efd1c6..8ea8a0d 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -21,16 +21,20 @@
*/
#include <linux/percpu.h>
#include <linux/hardirq.h>
+#include <linux/debugfs.h>
#include <asm/xen/hypercall.h>
#include "multicalls.h"
+#include "debugfs.h"
+
+#define MC_BATCH 32
#define MC_DEBUG 1
-#define MC_BATCH 32
#define MC_ARGS (MC_BATCH * 16)
+
struct mc_buffer {
struct multicall_entry entries[MC_BATCH];
#if MC_DEBUG
@@ -47,6 +51,76 @@
static DEFINE_PER_CPU(struct mc_buffer, mc_buffer);
DEFINE_PER_CPU(unsigned long, xen_mc_irq_flags);
+/* flush reasons 0- slots, 1- args, 2- callbacks */
+enum flush_reasons
+{
+ FL_SLOTS,
+ FL_ARGS,
+ FL_CALLBACKS,
+
+ FL_N_REASONS
+};
+
+#ifdef CONFIG_XEN_DEBUG_FS
+#define NHYPERCALLS 40 /* not really */
+
+static struct {
+ unsigned histo[MC_BATCH+1];
+
+ unsigned issued;
+ unsigned arg_total;
+ unsigned hypercalls;
+ unsigned histo_hypercalls[NHYPERCALLS];
+
+ unsigned flush[FL_N_REASONS];
+} mc_stats;
+
+static u8 zero_stats;
+
+static inline void check_zero(void)
+{
+ if (unlikely(zero_stats)) {
+ memset(&mc_stats, 0, sizeof(mc_stats));
+ zero_stats = 0;
+ }
+}
+
+static void mc_add_stats(const struct mc_buffer *mc)
+{
+ int i;
+
+ check_zero();
+
+ mc_stats.issued++;
+ mc_stats.hypercalls += mc->mcidx;
+ mc_stats.arg_total += mc->argidx;
+
+ mc_stats.histo[mc->mcidx]++;
+ for(i = 0; i < mc->mcidx; i++) {
+ unsigned op = mc->entries[i].op;
+ if (op < NHYPERCALLS)
+ mc_stats.histo_hypercalls[op]++;
+ }
+}
+
+static void mc_stats_flush(enum flush_reasons idx)
+{
+ check_zero();
+
+ mc_stats.flush[idx]++;
+}
+
+#else /* !CONFIG_XEN_DEBUG_FS */
+
+static inline void mc_add_stats(const struct mc_buffer *mc)
+{
+}
+
+static inline void mc_stats_flush(enum flush_reasons idx)
+{
+}
+#endif /* CONFIG_XEN_DEBUG_FS */
+
void xen_mc_flush(void)
{
struct mc_buffer *b = &__get_cpu_var(mc_buffer);
@@ -60,6 +134,8 @@
something in the middle */
local_irq_save(flags);
+ mc_add_stats(b);
+
if (b->mcidx) {
#if MC_DEBUG
memcpy(b->debug, b->entries,
@@ -115,6 +191,7 @@
if (b->mcidx == MC_BATCH ||
(argidx + args) > MC_ARGS) {
+ mc_stats_flush(b->mcidx == MC_BATCH ? FL_SLOTS : FL_ARGS);
xen_mc_flush();
argidx = roundup(b->argidx, sizeof(u64));
}
@@ -158,10 +235,44 @@
struct mc_buffer *b = &__get_cpu_var(mc_buffer);
struct callback *cb;
- if (b->cbidx == MC_BATCH)
+ if (b->cbidx == MC_BATCH) {
+ mc_stats_flush(FL_CALLBACKS);
xen_mc_flush();
+ }
cb = &b->callbacks[b->cbidx++];
cb->fn = fn;
cb->data = data;
}
+
+#ifdef CONFIG_XEN_DEBUG_FS
+
+static struct dentry *d_mc_debug;
+
+static int __init xen_mc_debugfs(void)
+{
+ struct dentry *d_xen = xen_init_debugfs();
+
+ if (d_xen == NULL)
+ return -ENOMEM;
+
+ d_mc_debug = debugfs_create_dir("multicalls", d_xen);
+
+ debugfs_create_u8("zero_stats", 0644, d_mc_debug, &zero_stats);
+
+ debugfs_create_u32("batches", 0444, d_mc_debug, &mc_stats.issued);
+ debugfs_create_u32("hypercalls", 0444, d_mc_debug, &mc_stats.hypercalls);
+ debugfs_create_u32("arg_total", 0444, d_mc_debug, &mc_stats.arg_total);
+
+ xen_debugfs_create_u32_array("batch_histo", 0444, d_mc_debug,
+ mc_stats.histo, MC_BATCH);
+ xen_debugfs_create_u32_array("hypercall_histo", 0444, d_mc_debug,
+ mc_stats.histo_hypercalls, NHYPERCALLS);
+ xen_debugfs_create_u32_array("flush_reasons", 0444, d_mc_debug,
+ mc_stats.flush, FL_N_REASONS);
+
+ return 0;
+}
+fs_initcall(xen_mc_debugfs);
+
+#endif /* CONFIG_XEN_DEBUG_FS */
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index d8faf79..d77da61 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -11,11 +11,8 @@
* useful topology information for the kernel to make use of. As a
* result, all CPUs are treated as if they're single-core and
* single-threaded.
- *
- * This does not handle HOTPLUG_CPU yet.
*/
#include <linux/sched.h>
-#include <linux/kernel_stat.h>
#include <linux/err.h>
#include <linux/smp.h>
@@ -36,8 +33,6 @@
#include "xen-ops.h"
#include "mmu.h"
-static void __cpuinit xen_init_lock_cpu(int cpu);
-
cpumask_t xen_cpu_initialized_map;
static DEFINE_PER_CPU(int, resched_irq);
@@ -64,11 +59,12 @@
return IRQ_HANDLED;
}
-static __cpuinit void cpu_bringup_and_idle(void)
+static __cpuinit void cpu_bringup(void)
{
int cpu = smp_processor_id();
cpu_init();
+ touch_softlockup_watchdog();
preempt_disable();
xen_enable_sysenter();
@@ -89,6 +85,11 @@
local_irq_enable();
wmb(); /* make sure everything is out */
+}
+
+static __cpuinit void cpu_bringup_and_idle(void)
+{
+ cpu_bringup();
cpu_idle();
}
@@ -212,8 +213,6 @@
cpu_set(cpu, cpu_present_map);
}
-
- //init_xenbus_allowed_cpumask();
}
static __cpuinit int
@@ -281,12 +280,6 @@
struct task_struct *idle = idle_task(cpu);
int rc;
-#if 0
- rc = cpu_up_check(cpu);
- if (rc)
- return rc;
-#endif
-
#ifdef CONFIG_X86_64
/* Allocate node local memory for AP pdas */
WARN_ON(cpu == 0);
@@ -339,6 +332,60 @@
{
}
+#ifdef CONFIG_HOTPLUG_CPU
+static int xen_cpu_disable(void)
+{
+ unsigned int cpu = smp_processor_id();
+ if (cpu == 0)
+ return -EBUSY;
+
+ cpu_disable_common();
+
+ load_cr3(swapper_pg_dir);
+ return 0;
+}
+
+static void xen_cpu_die(unsigned int cpu)
+{
+ while (HYPERVISOR_vcpu_op(VCPUOP_is_up, cpu, NULL)) {
+ current->state = TASK_UNINTERRUPTIBLE;
+ schedule_timeout(HZ/10);
+ }
+ unbind_from_irqhandler(per_cpu(resched_irq, cpu), NULL);
+ unbind_from_irqhandler(per_cpu(callfunc_irq, cpu), NULL);
+ unbind_from_irqhandler(per_cpu(debug_irq, cpu), NULL);
+ unbind_from_irqhandler(per_cpu(callfuncsingle_irq, cpu), NULL);
+ xen_uninit_lock_cpu(cpu);
+ xen_teardown_timer(cpu);
+
+ if (num_online_cpus() == 1)
+ alternatives_smp_switch(0);
+}
+
+static void xen_play_dead(void)
+{
+ play_dead_common();
+ HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
+ cpu_bringup();
+}
+
+#else /* !CONFIG_HOTPLUG_CPU */
+static int xen_cpu_disable(void)
+{
+ return -ENOSYS;
+}
+
+static void xen_cpu_die(unsigned int cpu)
+{
+ BUG();
+}
+
+static void xen_play_dead(void)
+{
+ BUG();
+}
+
+#endif
static void stop_self(void *v)
{
int cpu = smp_processor_id();
@@ -419,176 +466,16 @@
return IRQ_HANDLED;
}
-struct xen_spinlock {
- unsigned char lock; /* 0 -> free; 1 -> locked */
- unsigned short spinners; /* count of waiting cpus */
-};
-
-static int xen_spin_is_locked(struct raw_spinlock *lock)
-{
- struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-
- return xl->lock != 0;
-}
-
-static int xen_spin_is_contended(struct raw_spinlock *lock)
-{
- struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-
- /* Not strictly true; this is only the count of contended
- lock-takers entering the slow path. */
- return xl->spinners != 0;
-}
-
-static int xen_spin_trylock(struct raw_spinlock *lock)
-{
- struct xen_spinlock *xl = (struct xen_spinlock *)lock;
- u8 old = 1;
-
- asm("xchgb %b0,%1"
- : "+q" (old), "+m" (xl->lock) : : "memory");
-
- return old == 0;
-}
-
-static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
-static DEFINE_PER_CPU(struct xen_spinlock *, lock_spinners);
-
-static inline void spinning_lock(struct xen_spinlock *xl)
-{
- __get_cpu_var(lock_spinners) = xl;
- wmb(); /* set lock of interest before count */
- asm(LOCK_PREFIX " incw %0"
- : "+m" (xl->spinners) : : "memory");
-}
-
-static inline void unspinning_lock(struct xen_spinlock *xl)
-{
- asm(LOCK_PREFIX " decw %0"
- : "+m" (xl->spinners) : : "memory");
- wmb(); /* decrement count before clearing lock */
- __get_cpu_var(lock_spinners) = NULL;
-}
-
-static noinline int xen_spin_lock_slow(struct raw_spinlock *lock)
-{
- struct xen_spinlock *xl = (struct xen_spinlock *)lock;
- int irq = __get_cpu_var(lock_kicker_irq);
- int ret;
-
- /* If kicker interrupts not initialized yet, just spin */
- if (irq == -1)
- return 0;
-
- /* announce we're spinning */
- spinning_lock(xl);
-
- /* clear pending */
- xen_clear_irq_pending(irq);
-
- /* check again make sure it didn't become free while
- we weren't looking */
- ret = xen_spin_trylock(lock);
- if (ret)
- goto out;
-
- /* block until irq becomes pending */
- xen_poll_irq(irq);
- kstat_this_cpu.irqs[irq]++;
-
-out:
- unspinning_lock(xl);
- return ret;
-}
-
-static void xen_spin_lock(struct raw_spinlock *lock)
-{
- struct xen_spinlock *xl = (struct xen_spinlock *)lock;
- int timeout;
- u8 oldval;
-
- do {
- timeout = 1 << 10;
-
- asm("1: xchgb %1,%0\n"
- " testb %1,%1\n"
- " jz 3f\n"
- "2: rep;nop\n"
- " cmpb $0,%0\n"
- " je 1b\n"
- " dec %2\n"
- " jnz 2b\n"
- "3:\n"
- : "+m" (xl->lock), "=q" (oldval), "+r" (timeout)
- : "1" (1)
- : "memory");
-
- } while (unlikely(oldval != 0 && !xen_spin_lock_slow(lock)));
-}
-
-static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
-{
- int cpu;
-
- for_each_online_cpu(cpu) {
- /* XXX should mix up next cpu selection */
- if (per_cpu(lock_spinners, cpu) == xl) {
- xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
- break;
- }
- }
-}
-
-static void xen_spin_unlock(struct raw_spinlock *lock)
-{
- struct xen_spinlock *xl = (struct xen_spinlock *)lock;
-
- smp_wmb(); /* make sure no writes get moved after unlock */
- xl->lock = 0; /* release lock */
-
- /* make sure unlock happens before kick */
- barrier();
-
- if (unlikely(xl->spinners))
- xen_spin_unlock_slow(xl);
-}
-
-static __cpuinit void xen_init_lock_cpu(int cpu)
-{
- int irq;
- const char *name;
-
- name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
- irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
- cpu,
- xen_reschedule_interrupt,
- IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
- name,
- NULL);
-
- if (irq >= 0) {
- disable_irq(irq); /* make sure it's never delivered */
- per_cpu(lock_kicker_irq, cpu) = irq;
- }
-
- printk("cpu %d spinlock event irq %d\n", cpu, irq);
-}
-
-static void __init xen_init_spinlocks(void)
-{
- pv_lock_ops.spin_is_locked = xen_spin_is_locked;
- pv_lock_ops.spin_is_contended = xen_spin_is_contended;
- pv_lock_ops.spin_lock = xen_spin_lock;
- pv_lock_ops.spin_trylock = xen_spin_trylock;
- pv_lock_ops.spin_unlock = xen_spin_unlock;
-}
-
static const struct smp_ops xen_smp_ops __initdata = {
.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
.smp_prepare_cpus = xen_smp_prepare_cpus,
- .cpu_up = xen_cpu_up,
.smp_cpus_done = xen_smp_cpus_done,
+ .cpu_up = xen_cpu_up,
+ .cpu_die = xen_cpu_die,
+ .cpu_disable = xen_cpu_disable,
+ .play_dead = xen_play_dead,
+
.smp_send_stop = xen_smp_send_stop,
.smp_send_reschedule = xen_smp_send_reschedule,
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
new file mode 100644
index 0000000..dd71e3a
--- /dev/null
+++ b/arch/x86/xen/spinlock.c
@@ -0,0 +1,428 @@
+/*
+ * Split spinlock implementation out into its own file, so it can be
+ * compiled in a FTRACE-compatible way.
+ */
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/log2.h>
+
+#include <asm/paravirt.h>
+
+#include <xen/interface/xen.h>
+#include <xen/events.h>
+
+#include "xen-ops.h"
+#include "debugfs.h"
+
+#ifdef CONFIG_XEN_DEBUG_FS
+static struct xen_spinlock_stats
+{
+ u64 taken;
+ u32 taken_slow;
+ u32 taken_slow_nested;
+ u32 taken_slow_pickup;
+ u32 taken_slow_spurious;
+ u32 taken_slow_irqenable;
+
+ u64 released;
+ u32 released_slow;
+ u32 released_slow_kicked;
+
+#define HISTO_BUCKETS 30
+ u32 histo_spin_total[HISTO_BUCKETS+1];
+ u32 histo_spin_spinning[HISTO_BUCKETS+1];
+ u32 histo_spin_blocked[HISTO_BUCKETS+1];
+
+ u64 time_total;
+ u64 time_spinning;
+ u64 time_blocked;
+} spinlock_stats;
+
+static u8 zero_stats;
+
+static unsigned lock_timeout = 1 << 10;
+#define TIMEOUT lock_timeout
+
+static inline void check_zero(void)
+{
+ if (unlikely(zero_stats)) {
+ memset(&spinlock_stats, 0, sizeof(spinlock_stats));
+ zero_stats = 0;
+ }
+}
+
+#define ADD_STATS(elem, val) \
+ do { check_zero(); spinlock_stats.elem += (val); } while(0)
+
+static inline u64 spin_time_start(void)
+{
+ return xen_clocksource_read();
+}
+
+static void __spin_time_accum(u64 delta, u32 *array)
+{
+ unsigned index = ilog2(delta);
+
+ check_zero();
+
+ if (index < HISTO_BUCKETS)
+ array[index]++;
+ else
+ array[HISTO_BUCKETS]++;
+}
+
+static inline void spin_time_accum_spinning(u64 start)
+{
+ u32 delta = xen_clocksource_read() - start;
+
+ __spin_time_accum(delta, spinlock_stats.histo_spin_spinning);
+ spinlock_stats.time_spinning += delta;
+}
+
+static inline void spin_time_accum_total(u64 start)
+{
+ u32 delta = xen_clocksource_read() - start;
+
+ __spin_time_accum(delta, spinlock_stats.histo_spin_total);
+ spinlock_stats.time_total += delta;
+}
+
+static inline void spin_time_accum_blocked(u64 start)
+{
+ u32 delta = xen_clocksource_read() - start;
+
+ __spin_time_accum(delta, spinlock_stats.histo_spin_blocked);
+ spinlock_stats.time_blocked += delta;
+}
+#else /* !CONFIG_XEN_DEBUG_FS */
+#define TIMEOUT (1 << 10)
+#define ADD_STATS(elem, val) do { (void)(val); } while(0)
+
+static inline u64 spin_time_start(void)
+{
+ return 0;
+}
+
+static inline void spin_time_accum_total(u64 start)
+{
+}
+static inline void spin_time_accum_spinning(u64 start)
+{
+}
+static inline void spin_time_accum_blocked(u64 start)
+{
+}
+#endif /* CONFIG_XEN_DEBUG_FS */
+
+struct xen_spinlock {
+ unsigned char lock; /* 0 -> free; 1 -> locked */
+ unsigned short spinners; /* count of waiting cpus */
+};
+
+static int xen_spin_is_locked(struct raw_spinlock *lock)
+{
+ struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+ return xl->lock != 0;
+}
+
+static int xen_spin_is_contended(struct raw_spinlock *lock)
+{
+ struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+ /* Not strictly true; this is only the count of contended
+ lock-takers entering the slow path. */
+ return xl->spinners != 0;
+}
+
+static int xen_spin_trylock(struct raw_spinlock *lock)
+{
+ struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+ u8 old = 1;
+
+ asm("xchgb %b0,%1"
+ : "+q" (old), "+m" (xl->lock) : : "memory");
+
+ return old == 0;
+}
+
+static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
+static DEFINE_PER_CPU(struct xen_spinlock *, lock_spinners);
+
+/*
+ * Mark a cpu as interested in a lock. Returns the CPU's previous
+ * lock of interest, in case we got preempted by an interrupt.
+ */
+static inline struct xen_spinlock *spinning_lock(struct xen_spinlock *xl)
+{
+ struct xen_spinlock *prev;
+
+ prev = __get_cpu_var(lock_spinners);
+ __get_cpu_var(lock_spinners) = xl;
+
+ wmb(); /* set lock of interest before count */
+
+ asm(LOCK_PREFIX " incw %0"
+ : "+m" (xl->spinners) : : "memory");
+
+ return prev;
+}
+
+/*
+ * Mark a cpu as no longer interested in a lock. Restores previous
+ * lock of interest (NULL for none).
+ */
+static inline void unspinning_lock(struct xen_spinlock *xl, struct xen_spinlock *prev)
+{
+ asm(LOCK_PREFIX " decw %0"
+ : "+m" (xl->spinners) : : "memory");
+ wmb(); /* decrement count before restoring lock */
+ __get_cpu_var(lock_spinners) = prev;
+}
+
+static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enable)
+{
+ struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+ struct xen_spinlock *prev;
+ int irq = __get_cpu_var(lock_kicker_irq);
+ int ret;
+ unsigned long flags;
+ u64 start;
+
+ /* If kicker interrupts not initialized yet, just spin */
+ if (irq == -1)
+ return 0;
+
+ start = spin_time_start();
+
+ /* announce we're spinning */
+ prev = spinning_lock(xl);
+
+ flags = __raw_local_save_flags();
+ if (irq_enable) {
+ ADD_STATS(taken_slow_irqenable, 1);
+ raw_local_irq_enable();
+ }
+
+ ADD_STATS(taken_slow, 1);
+ ADD_STATS(taken_slow_nested, prev != NULL);
+
+ do {
+ /* clear pending */
+ xen_clear_irq_pending(irq);
+
+ /* check again make sure it didn't become free while
+ we weren't looking */
+ ret = xen_spin_trylock(lock);
+ if (ret) {
+ ADD_STATS(taken_slow_pickup, 1);
+
+ /*
+ * If we interrupted another spinlock while it
+ * was blocking, make sure it doesn't block
+ * without rechecking the lock.
+ */
+ if (prev != NULL)
+ xen_set_irq_pending(irq);
+ goto out;
+ }
+
+ /*
+ * Block until irq becomes pending. If we're
+ * interrupted at this point (after the trylock but
+ * before entering the block), then the nested lock
+ * handler guarantees that the irq will be left
+ * pending if there's any chance the lock became free;
+ * xen_poll_irq() returns immediately if the irq is
+ * pending.
+ */
+ xen_poll_irq(irq);
+ ADD_STATS(taken_slow_spurious, !xen_test_irq_pending(irq));
+ } while (!xen_test_irq_pending(irq)); /* check for spurious wakeups */
+
+ kstat_this_cpu.irqs[irq]++;
+
+out:
+ raw_local_irq_restore(flags);
+ unspinning_lock(xl, prev);
+ spin_time_accum_blocked(start);
+
+ return ret;
+}
+
+static inline void __xen_spin_lock(struct raw_spinlock *lock, bool irq_enable)
+{
+ struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+ unsigned timeout;
+ u8 oldval;
+ u64 start_spin;
+
+ ADD_STATS(taken, 1);
+
+ start_spin = spin_time_start();
+
+ do {
+ u64 start_spin_fast = spin_time_start();
+
+ timeout = TIMEOUT;
+
+ asm("1: xchgb %1,%0\n"
+ " testb %1,%1\n"
+ " jz 3f\n"
+ "2: rep;nop\n"
+ " cmpb $0,%0\n"
+ " je 1b\n"
+ " dec %2\n"
+ " jnz 2b\n"
+ "3:\n"
+ : "+m" (xl->lock), "=q" (oldval), "+r" (timeout)
+ : "1" (1)
+ : "memory");
+
+ spin_time_accum_spinning(start_spin_fast);
+
+ } while (unlikely(oldval != 0 &&
+ (TIMEOUT == ~0 || !xen_spin_lock_slow(lock, irq_enable))));
+
+ spin_time_accum_total(start_spin);
+}
+
+static void xen_spin_lock(struct raw_spinlock *lock)
+{
+ __xen_spin_lock(lock, false);
+}
+
+static void xen_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags)
+{
+ __xen_spin_lock(lock, !raw_irqs_disabled_flags(flags));
+}
+
+static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
+{
+ int cpu;
+
+ ADD_STATS(released_slow, 1);
+
+ for_each_online_cpu(cpu) {
+ /* XXX should mix up next cpu selection */
+ if (per_cpu(lock_spinners, cpu) == xl) {
+ ADD_STATS(released_slow_kicked, 1);
+ xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
+ break;
+ }
+ }
+}
+
+static void xen_spin_unlock(struct raw_spinlock *lock)
+{
+ struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+ ADD_STATS(released, 1);
+
+ smp_wmb(); /* make sure no writes get moved after unlock */
+ xl->lock = 0; /* release lock */
+
+ /* make sure unlock happens before kick */
+ barrier();
+
+ if (unlikely(xl->spinners))
+ xen_spin_unlock_slow(xl);
+}
+
+static irqreturn_t dummy_handler(int irq, void *dev_id)
+{
+ BUG();
+ return IRQ_HANDLED;
+}
+
+void __cpuinit xen_init_lock_cpu(int cpu)
+{
+ int irq;
+ const char *name;
+
+ name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
+ irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
+ cpu,
+ dummy_handler,
+ IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+ name,
+ NULL);
+
+ if (irq >= 0) {
+ disable_irq(irq); /* make sure it's never delivered */
+ per_cpu(lock_kicker_irq, cpu) = irq;
+ }
+
+ printk("cpu %d spinlock event irq %d\n", cpu, irq);
+}
+
+void xen_uninit_lock_cpu(int cpu)
+{
+ unbind_from_irqhandler(per_cpu(lock_kicker_irq, cpu), NULL);
+}
+
+void __init xen_init_spinlocks(void)
+{
+ pv_lock_ops.spin_is_locked = xen_spin_is_locked;
+ pv_lock_ops.spin_is_contended = xen_spin_is_contended;
+ pv_lock_ops.spin_lock = xen_spin_lock;
+ pv_lock_ops.spin_lock_flags = xen_spin_lock_flags;
+ pv_lock_ops.spin_trylock = xen_spin_trylock;
+ pv_lock_ops.spin_unlock = xen_spin_unlock;
+}
+
+#ifdef CONFIG_XEN_DEBUG_FS
+
+static struct dentry *d_spin_debug;
+
+static int __init xen_spinlock_debugfs(void)
+{
+ struct dentry *d_xen = xen_init_debugfs();
+
+ if (d_xen == NULL)
+ return -ENOMEM;
+
+ d_spin_debug = debugfs_create_dir("spinlocks", d_xen);
+
+ debugfs_create_u8("zero_stats", 0644, d_spin_debug, &zero_stats);
+
+ debugfs_create_u32("timeout", 0644, d_spin_debug, &lock_timeout);
+
+ debugfs_create_u64("taken", 0444, d_spin_debug, &spinlock_stats.taken);
+ debugfs_create_u32("taken_slow", 0444, d_spin_debug,
+ &spinlock_stats.taken_slow);
+ debugfs_create_u32("taken_slow_nested", 0444, d_spin_debug,
+ &spinlock_stats.taken_slow_nested);
+ debugfs_create_u32("taken_slow_pickup", 0444, d_spin_debug,
+ &spinlock_stats.taken_slow_pickup);
+ debugfs_create_u32("taken_slow_spurious", 0444, d_spin_debug,
+ &spinlock_stats.taken_slow_spurious);
+ debugfs_create_u32("taken_slow_irqenable", 0444, d_spin_debug,
+ &spinlock_stats.taken_slow_irqenable);
+
+ debugfs_create_u64("released", 0444, d_spin_debug, &spinlock_stats.released);
+ debugfs_create_u32("released_slow", 0444, d_spin_debug,
+ &spinlock_stats.released_slow);
+ debugfs_create_u32("released_slow_kicked", 0444, d_spin_debug,
+ &spinlock_stats.released_slow_kicked);
+
+ debugfs_create_u64("time_spinning", 0444, d_spin_debug,
+ &spinlock_stats.time_spinning);
+ debugfs_create_u64("time_blocked", 0444, d_spin_debug,
+ &spinlock_stats.time_blocked);
+ debugfs_create_u64("time_total", 0444, d_spin_debug,
+ &spinlock_stats.time_total);
+
+ xen_debugfs_create_u32_array("histo_total", 0444, d_spin_debug,
+ spinlock_stats.histo_spin_total, HISTO_BUCKETS + 1);
+ xen_debugfs_create_u32_array("histo_spinning", 0444, d_spin_debug,
+ spinlock_stats.histo_spin_spinning, HISTO_BUCKETS + 1);
+ xen_debugfs_create_u32_array("histo_blocked", 0444, d_spin_debug,
+ spinlock_stats.histo_spin_blocked, HISTO_BUCKETS + 1);
+
+ return 0;
+}
+fs_initcall(xen_spinlock_debugfs);
+
+#endif /* CONFIG_XEN_DEBUG_FS */
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 685b774..004ba86 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -30,8 +30,6 @@
#define TIMER_SLOP 100000
#define NS_PER_TICK (1000000000LL / HZ)
-static cycle_t xen_clocksource_read(void);
-
/* runstate info updated by Xen */
static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate);
@@ -213,7 +211,7 @@
return xen_khz;
}
-static cycle_t xen_clocksource_read(void)
+cycle_t xen_clocksource_read(void)
{
struct pvclock_vcpu_time_info *src;
cycle_t ret;
@@ -452,6 +450,14 @@
setup_runstate_info(cpu);
}
+void xen_teardown_timer(int cpu)
+{
+ struct clock_event_device *evt;
+ BUG_ON(cpu == 0);
+ evt = &per_cpu(xen_clock_events, cpu);
+ unbind_from_irqhandler(evt->irq, NULL);
+}
+
void xen_setup_cpu_clockevents(void)
{
BUG_ON(preemptible());
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index 2497a30..42786f5 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -298,7 +298,7 @@
push %eax
push %ecx
push %edx
- call force_evtchn_callback
+ call xen_force_evtchn_callback
pop %edx
pop %ecx
pop %eax
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 7f58304..05794c5 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -26,8 +26,15 @@
/* Pseudo-flag used for virtual NMI, which we don't implement yet */
#define XEN_EFLAGS_NMI 0x80000000
-#if 0
-#include <asm/percpu.h>
+#if 1
+/*
+ x86-64 does not yet support direct access to percpu variables
+ via a segment override, so we just need to make sure this code
+ never gets used
+ */
+#define BUG ud2a
+#define PER_CPU_VAR(var, off) 0xdeadbeef
+#endif
/*
Enable events. This clears the event mask and tests the pending
@@ -35,6 +42,8 @@
events, then enter the hypervisor to get them handled.
*/
ENTRY(xen_irq_enable_direct)
+ BUG
+
/* Unmask events */
movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
@@ -58,6 +67,8 @@
non-zero.
*/
ENTRY(xen_irq_disable_direct)
+ BUG
+
movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
ENDPATCH(xen_irq_disable_direct)
ret
@@ -74,6 +85,8 @@
Xen and x86 use opposite senses (mask vs enable).
*/
ENTRY(xen_save_fl_direct)
+ BUG
+
testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
setz %ah
addb %ah,%ah
@@ -91,6 +104,8 @@
if so.
*/
ENTRY(xen_restore_fl_direct)
+ BUG
+
testb $X86_EFLAGS_IF>>8, %ah
setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
/* Preempt here doesn't matter because that will deal with
@@ -122,7 +137,7 @@
push %r9
push %r10
push %r11
- call force_evtchn_callback
+ call xen_force_evtchn_callback
pop %r11
pop %r10
pop %r9
@@ -133,7 +148,6 @@
pop %rcx
pop %rax
ret
-#endif
ENTRY(xen_adjust_exception_frame)
mov 8+0(%rsp),%rcx
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index dd3c231..d7422dc 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -2,6 +2,7 @@
#define XEN_OPS_H
#include <linux/init.h>
+#include <linux/clocksource.h>
#include <linux/irqreturn.h>
#include <xen/xen-ops.h>
@@ -31,7 +32,10 @@
void __init xen_build_dynamic_phys_to_machine(void);
+void xen_init_irq_ops(void);
void xen_setup_timer(int cpu);
+void xen_teardown_timer(int cpu);
+cycle_t xen_clocksource_read(void);
void xen_setup_cpu_clockevents(void);
unsigned long xen_tsc_khz(void);
void __init xen_time_init(void);
@@ -50,6 +54,10 @@
#ifdef CONFIG_SMP
void xen_smp_init(void);
+void __init xen_init_spinlocks(void);
+__cpuinit void xen_init_lock_cpu(int cpu);
+void xen_uninit_lock_cpu(int cpu);
+
extern cpumask_t xen_cpu_initialized_map;
#else
static inline void xen_smp_init(void) {}
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index bff602c..1a50ae7 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1066,7 +1066,7 @@
static int __init xlblk_init(void)
{
- if (!is_running_on_xen())
+ if (!xen_domain())
return -ENODEV;
if (register_blkdev(XENVBD_MAJOR, DEV_NAME)) {
diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c
index 6b70aa6..538ceea 100644
--- a/drivers/char/hvc_xen.c
+++ b/drivers/char/hvc_xen.c
@@ -108,8 +108,8 @@
{
struct hvc_struct *hp;
- if (!is_running_on_xen() ||
- is_initial_xendomain() ||
+ if (!xen_pv_domain() ||
+ xen_initial_domain() ||
!xen_start_info->console.domU.evtchn)
return -ENODEV;
@@ -142,7 +142,7 @@
static int xen_cons_init(void)
{
- if (!is_running_on_xen())
+ if (!xen_pv_domain())
return 0;
hvc_instantiate(HVC_COOKIE, 0, &hvc_ops);
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index 9ce3b3b..3ab6362 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -335,11 +335,11 @@
static int __init xenkbd_init(void)
{
- if (!is_running_on_xen())
+ if (!xen_domain())
return -ENODEV;
/* Nothing to do if running in dom0. */
- if (is_initial_xendomain())
+ if (xen_initial_domain())
return -ENODEV;
return xenbus_register_frontend(&xenkbd);
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index c749bdb..3c3dd40 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1794,10 +1794,10 @@
static int __init netif_init(void)
{
- if (!is_running_on_xen())
+ if (!xen_domain())
return -ENODEV;
- if (is_initial_xendomain())
+ if (xen_initial_domain())
return 0;
printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
@@ -1809,7 +1809,7 @@
static void __exit netif_exit(void)
{
- if (is_initial_xendomain())
+ if (xen_initial_domain())
return;
xenbus_unregister_driver(&netfront);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 5799298..b697a13 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -210,143 +210,7 @@
/*-------------------------------------------------------------------------*/
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct ehci_caps {
- /* these fields are specified as 8 and 16 bit registers,
- * but some hosts can't perform 8 or 16 bit PCI accesses.
- */
- u32 hc_capbase;
-#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
-#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
- u32 hcs_params; /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
-#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
-#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
-#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
-#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
-
- u32 hcc_params; /* HCCPARAMS - offset 0x8 */
-#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
-#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
-#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
- u8 portroute [8]; /* nibbles for routing - offset 0xC */
-} __attribute__ ((packed));
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct ehci_regs {
-
- /* USBCMD: offset 0x00 */
- u32 command;
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK (1<<11) /* enable "park" on async qh */
-#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
-#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
-#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
-#define CMD_ASE (1<<5) /* async schedule enable */
-#define CMD_PSE (1<<4) /* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET (1<<1) /* reset HC not bus */
-#define CMD_RUN (1<<0) /* start/stop HC */
-
- /* USBSTS: offset 0x04 */
- u32 status;
-#define STS_ASS (1<<15) /* Async Schedule Status */
-#define STS_PSS (1<<14) /* Periodic Schedule Status */
-#define STS_RECL (1<<13) /* Reclamation */
-#define STS_HALT (1<<12) /* Not running (any reason) */
-/* some bits reserved */
- /* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA (1<<5) /* Interrupted on async advance */
-#define STS_FATAL (1<<4) /* such as some PCI access errors */
-#define STS_FLR (1<<3) /* frame list rolled over */
-#define STS_PCD (1<<2) /* port change detect */
-#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
-#define STS_INT (1<<0) /* "normal" completion (short, ...) */
-
- /* USBINTR: offset 0x08 */
- u32 intr_enable;
-
- /* FRINDEX: offset 0x0C */
- u32 frame_index; /* current microframe number */
- /* CTRLDSSEGMENT: offset 0x10 */
- u32 segment; /* address bits 63:32 if needed */
- /* PERIODICLISTBASE: offset 0x14 */
- u32 frame_list; /* points to periodic list */
- /* ASYNCLISTADDR: offset 0x18 */
- u32 async_next; /* address of next async queue head */
-
- u32 reserved [9];
-
- /* CONFIGFLAG: offset 0x40 */
- u32 configured_flag;
-#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
-
- /* PORTSC: offset 0x44 */
- u32 port_status [0]; /* up to N_PORTS */
-/* 31:23 reserved */
-#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
-#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
-#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
-/* 19:16 for port testing */
-#define PORT_LED_OFF (0<<14)
-#define PORT_LED_AMBER (1<<14)
-#define PORT_LED_GREEN (2<<14)
-#define PORT_LED_MASK (3<<14)
-#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
-#define PORT_POWER (1<<12) /* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-/* 9 reserved */
-#define PORT_RESET (1<<8) /* reset port */
-#define PORT_SUSPEND (1<<7) /* suspend port */
-#define PORT_RESUME (1<<6) /* resume it */
-#define PORT_OCC (1<<5) /* over current change */
-#define PORT_OC (1<<4) /* over current active */
-#define PORT_PEC (1<<3) /* port enable change */
-#define PORT_PE (1<<2) /* port enable */
-#define PORT_CSC (1<<1) /* connect status change */
-#define PORT_CONNECT (1<<0) /* device connected */
-#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
-} __attribute__ ((packed));
-
-#define USBMODE 0x68 /* USB Device mode */
-#define USBMODE_SDIS (1<<3) /* Stream disable */
-#define USBMODE_BE (1<<2) /* BE/LE endianness select */
-#define USBMODE_CM_HC (3<<0) /* host controller mode */
-#define USBMODE_CM_IDLE (0<<0) /* idle state */
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console. (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
- u32 control;
-#define DBGP_OWNER (1<<30)
-#define DBGP_ENABLED (1<<28)
-#define DBGP_DONE (1<<16)
-#define DBGP_INUSE (1<<10)
-#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
-# define DBGP_ERR_BAD 1
-# define DBGP_ERR_SIGNAL 2
-#define DBGP_ERROR (1<<6)
-#define DBGP_GO (1<<5)
-#define DBGP_OUT (1<<4)
-#define DBGP_LEN(x) (((x)>>0)&0x0f)
- u32 pids;
-#define DBGP_PID_GET(x) (((x)>>16)&0xff)
-#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok))
- u32 data03;
- u32 data47;
- u32 address;
-#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep))
-} __attribute__ ((packed));
+#include <linux/usb/ehci_def.h>
/*-------------------------------------------------------------------------*/
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d85a74c..f79c204 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -673,7 +673,6 @@
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select VIDEO_SELECT
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -1578,7 +1577,6 @@
tristate "Cyberblade/i1 support"
depends on FB && PCI && X86_32 && !64BIT
select FB_CFB_IMAGEBLIT
- select VIDEO_SELECT
---help---
This driver is supposed to support the Trident Cyberblade/i1
graphics core integrated in the VIA VT8601A North Bridge,
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 06f87b0..2f50a80 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -43,22 +43,6 @@
buffer. Each 64KB will give you approximately 16 80x25
screenfuls of scrollback buffer
-config VIDEO_SELECT
- bool "Video mode selection support"
- depends on X86 && VGA_CONSOLE
- ---help---
- This enables support for text mode selection on kernel startup. If
- you want to take advantage of some high-resolution text mode your
- card's BIOS offers, but the traditional Linux utilities like
- SVGATextMode don't, you can say Y here and set the mode using the
- "vga=" option from your boot loader (lilo or loadlin) or set
- "vga=ask" which brings up a video mode menu on kernel startup. (Try
- "man bootparam" or see the documentation of your boot loader about
- how to pass options to the kernel.)
-
- Read the file <file:Documentation/svga.txt> for more information
- about the Video mode selection support. If unsure, say N.
-
config MDA_CONSOLE
depends on !M68K && !PARISC && ISA
tristate "MDA text console (dual-headed) (EXPERIMENTAL)"
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index 47ed39b..a463b3d 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -680,11 +680,11 @@
static int __init xenfb_init(void)
{
- if (!is_running_on_xen())
+ if (!xen_domain())
return -ENODEV;
/* Nothing to do if running in dom0. */
- if (is_initial_xendomain())
+ if (xen_initial_domain())
return -ENODEV;
return xenbus_register_frontend(&xenfb);
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index 363286c..d2a8fdf 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -1,4 +1,5 @@
obj-y += grant-table.o features.o events.o manage.o
obj-y += xenbus/
+obj-$(CONFIG_HOTPLUG_CPU) += cpu_hotplug.o
obj-$(CONFIG_XEN_XENCOMM) += xencomm.o
obj-$(CONFIG_XEN_BALLOON) += balloon.o
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 2e15da54..8c83abc 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -53,7 +53,6 @@
#include <asm/tlb.h>
#include <xen/interface/memory.h>
-#include <xen/balloon.h>
#include <xen/xenbus.h>
#include <xen/features.h>
#include <xen/page.h>
@@ -226,9 +225,8 @@
}
set_xen_guest_handle(reservation.extent_start, frame_list);
- reservation.nr_extents = nr_pages;
- rc = HYPERVISOR_memory_op(
- XENMEM_populate_physmap, &reservation);
+ reservation.nr_extents = nr_pages;
+ rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation);
if (rc < nr_pages) {
if (rc > 0) {
int ret;
@@ -236,7 +234,7 @@
/* We hit the Xen hard limit: reprobe. */
reservation.nr_extents = rc;
ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation,
- &reservation);
+ &reservation);
BUG_ON(ret != rc);
}
if (rc >= 0)
@@ -420,7 +418,7 @@
unsigned long pfn;
struct page *page;
- if (!is_running_on_xen())
+ if (!xen_pv_domain())
return -ENODEV;
pr_info("xen_balloon: Initialising balloon driver.\n");
@@ -464,136 +462,13 @@
module_exit(balloon_exit);
-static void balloon_update_driver_allowance(long delta)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&balloon_lock, flags);
- balloon_stats.driver_pages += delta;
- spin_unlock_irqrestore(&balloon_lock, flags);
-}
-
-static int dealloc_pte_fn(
- pte_t *pte, struct page *pmd_page, unsigned long addr, void *data)
-{
- unsigned long mfn = pte_mfn(*pte);
- int ret;
- struct xen_memory_reservation reservation = {
- .nr_extents = 1,
- .extent_order = 0,
- .domid = DOMID_SELF
- };
- set_xen_guest_handle(reservation.extent_start, &mfn);
- set_pte_at(&init_mm, addr, pte, __pte_ma(0ull));
- set_phys_to_machine(__pa(addr) >> PAGE_SHIFT, INVALID_P2M_ENTRY);
- ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation);
- BUG_ON(ret != 1);
- return 0;
-}
-
-static struct page **alloc_empty_pages_and_pagevec(int nr_pages)
-{
- unsigned long vaddr, flags;
- struct page *page, **pagevec;
- int i, ret;
-
- pagevec = kmalloc(sizeof(page) * nr_pages, GFP_KERNEL);
- if (pagevec == NULL)
- return NULL;
-
- for (i = 0; i < nr_pages; i++) {
- page = pagevec[i] = alloc_page(GFP_KERNEL);
- if (page == NULL)
- goto err;
-
- vaddr = (unsigned long)page_address(page);
-
- scrub_page(page);
-
- spin_lock_irqsave(&balloon_lock, flags);
-
- if (xen_feature(XENFEAT_auto_translated_physmap)) {
- unsigned long gmfn = page_to_pfn(page);
- struct xen_memory_reservation reservation = {
- .nr_extents = 1,
- .extent_order = 0,
- .domid = DOMID_SELF
- };
- set_xen_guest_handle(reservation.extent_start, &gmfn);
- ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation,
- &reservation);
- if (ret == 1)
- ret = 0; /* success */
- } else {
- ret = apply_to_page_range(&init_mm, vaddr, PAGE_SIZE,
- dealloc_pte_fn, NULL);
- }
-
- if (ret != 0) {
- spin_unlock_irqrestore(&balloon_lock, flags);
- __free_page(page);
- goto err;
- }
-
- totalram_pages = --balloon_stats.current_pages;
-
- spin_unlock_irqrestore(&balloon_lock, flags);
- }
-
- out:
- schedule_work(&balloon_worker);
- flush_tlb_all();
- return pagevec;
-
- err:
- spin_lock_irqsave(&balloon_lock, flags);
- while (--i >= 0)
- balloon_append(pagevec[i]);
- spin_unlock_irqrestore(&balloon_lock, flags);
- kfree(pagevec);
- pagevec = NULL;
- goto out;
-}
-
-static void free_empty_pages_and_pagevec(struct page **pagevec, int nr_pages)
-{
- unsigned long flags;
- int i;
-
- if (pagevec == NULL)
- return;
-
- spin_lock_irqsave(&balloon_lock, flags);
- for (i = 0; i < nr_pages; i++) {
- BUG_ON(page_count(pagevec[i]) != 1);
- balloon_append(pagevec[i]);
- }
- spin_unlock_irqrestore(&balloon_lock, flags);
-
- kfree(pagevec);
-
- schedule_work(&balloon_worker);
-}
-
-static void balloon_release_driver_page(struct page *page)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&balloon_lock, flags);
- balloon_append(page);
- balloon_stats.driver_pages--;
- spin_unlock_irqrestore(&balloon_lock, flags);
-
- schedule_work(&balloon_worker);
-}
-
-
-#define BALLOON_SHOW(name, format, args...) \
- static ssize_t show_##name(struct sys_device *dev, \
- char *buf) \
- { \
- return sprintf(buf, format, ##args); \
- } \
+#define BALLOON_SHOW(name, format, args...) \
+ static ssize_t show_##name(struct sys_device *dev, \
+ struct sysdev_attribute *attr, \
+ char *buf) \
+ { \
+ return sprintf(buf, format, ##args); \
+ } \
static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL)
BALLOON_SHOW(current_kb, "%lu\n", PAGES2KB(balloon_stats.current_pages));
@@ -604,7 +479,8 @@
(balloon_stats.hard_limit!=~0UL) ? PAGES2KB(balloon_stats.hard_limit) : 0);
BALLOON_SHOW(driver_kb, "%lu\n", PAGES2KB(balloon_stats.driver_pages));
-static ssize_t show_target_kb(struct sys_device *dev, char *buf)
+static ssize_t show_target_kb(struct sys_device *dev, struct sysdev_attribute *attr,
+ char *buf)
{
return sprintf(buf, "%lu\n", PAGES2KB(balloon_stats.target_pages));
}
@@ -614,19 +490,14 @@
const char *buf,
size_t count)
{
- char memstring[64], *endchar;
+ char *endchar;
unsigned long long target_bytes;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (count <= 1)
- return -EBADMSG; /* runt */
- if (count > sizeof(memstring))
- return -EFBIG; /* too long */
- strcpy(memstring, buf);
+ target_bytes = memparse(buf, &endchar);
- target_bytes = memparse(memstring, &endchar);
balloon_set_new_target(target_bytes >> PAGE_SHIFT);
return count;
@@ -694,20 +565,4 @@
return error;
}
-static void unregister_balloon(struct sys_device *sysdev)
-{
- int i;
-
- sysfs_remove_group(&sysdev->kobj, &balloon_info_group);
- for (i = 0; i < ARRAY_SIZE(balloon_attrs); i++)
- sysdev_remove_file(sysdev, balloon_attrs[i]);
- sysdev_unregister(sysdev);
- sysdev_class_unregister(&balloon_sysdev_class);
-}
-
-static void balloon_sysfs_exit(void)
-{
- unregister_balloon(&balloon_sysdev);
-}
-
MODULE_LICENSE("GPL");
diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c
new file mode 100644
index 0000000..565280ec
--- /dev/null
+++ b/drivers/xen/cpu_hotplug.c
@@ -0,0 +1,90 @@
+#include <linux/notifier.h>
+
+#include <xen/xenbus.h>
+
+#include <asm-x86/xen/hypervisor.h>
+#include <asm/cpu.h>
+
+static void enable_hotplug_cpu(int cpu)
+{
+ if (!cpu_present(cpu))
+ arch_register_cpu(cpu);
+
+ cpu_set(cpu, cpu_present_map);
+}
+
+static void disable_hotplug_cpu(int cpu)
+{
+ if (cpu_present(cpu))
+ arch_unregister_cpu(cpu);
+
+ cpu_clear(cpu, cpu_present_map);
+}
+
+static void vcpu_hotplug(unsigned int cpu)
+{
+ int err;
+ char dir[32], state[32];
+
+ if (!cpu_possible(cpu))
+ return;
+
+ sprintf(dir, "cpu/%u", cpu);
+ err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
+ if (err != 1) {
+ printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
+ return;
+ }
+
+ if (strcmp(state, "online") == 0) {
+ enable_hotplug_cpu(cpu);
+ } else if (strcmp(state, "offline") == 0) {
+ (void)cpu_down(cpu);
+ disable_hotplug_cpu(cpu);
+ } else {
+ printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n",
+ state, cpu);
+ }
+}
+
+static void handle_vcpu_hotplug_event(struct xenbus_watch *watch,
+ const char **vec, unsigned int len)
+{
+ unsigned int cpu;
+ char *cpustr;
+ const char *node = vec[XS_WATCH_PATH];
+
+ cpustr = strstr(node, "cpu/");
+ if (cpustr != NULL) {
+ sscanf(cpustr, "cpu/%u", &cpu);
+ vcpu_hotplug(cpu);
+ }
+}
+
+static int setup_cpu_watcher(struct notifier_block *notifier,
+ unsigned long event, void *data)
+{
+ static struct xenbus_watch cpu_watch = {
+ .node = "cpu",
+ .callback = handle_vcpu_hotplug_event};
+
+ (void)register_xenbus_watch(&cpu_watch);
+
+ return NOTIFY_DONE;
+}
+
+static int __init setup_vcpu_hotplug_event(void)
+{
+ static struct notifier_block xsn_cpu = {
+ .notifier_call = setup_cpu_watcher };
+
+ if (!xen_pv_domain())
+ return -ENODEV;
+
+ register_xenstore_notifier(&xsn_cpu);
+
+ return 0;
+}
+
+arch_initcall(setup_vcpu_hotplug_event);
+
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 0e0c285..c3290bc 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -84,17 +84,6 @@
/* Xen will never allocate port zero for any purpose. */
#define VALID_EVTCHN(chn) ((chn) != 0)
-/*
- * Force a proper event-channel callback from Xen after clearing the
- * callback mask. We do this in a very simple manner, by making a call
- * down into Xen. The pending flag will be checked by Xen on return.
- */
-void force_evtchn_callback(void)
-{
- (void)HYPERVISOR_xen_version(0, NULL);
-}
-EXPORT_SYMBOL_GPL(force_evtchn_callback);
-
static struct irq_chip xen_dynamic_chip;
/* Constructor for packed IRQ information. */
@@ -175,6 +164,12 @@
sync_set_bit(port, &s->evtchn_pending[0]);
}
+static inline int test_evtchn(int port)
+{
+ struct shared_info *s = HYPERVISOR_shared_info;
+ return sync_test_bit(port, &s->evtchn_pending[0]);
+}
+
/**
* notify_remote_via_irq - send event to remote end of event channel via irq
@@ -365,6 +360,10 @@
per_cpu(virq_to_irq, cpu_from_evtchn(evtchn))
[index_from_irq(irq)] = -1;
break;
+ case IRQT_IPI:
+ per_cpu(ipi_to_irq, cpu_from_evtchn(evtchn))
+ [index_from_irq(irq)] = -1;
+ break;
default:
break;
}
@@ -743,6 +742,25 @@
clear_evtchn(evtchn);
}
+void xen_set_irq_pending(int irq)
+{
+ int evtchn = evtchn_from_irq(irq);
+
+ if (VALID_EVTCHN(evtchn))
+ set_evtchn(evtchn);
+}
+
+bool xen_test_irq_pending(int irq)
+{
+ int evtchn = evtchn_from_irq(irq);
+ bool ret = false;
+
+ if (VALID_EVTCHN(evtchn))
+ ret = test_evtchn(evtchn);
+
+ return ret;
+}
+
/* Poll waiting for an irq to become pending. In the usual case, the
irq will be disabled so it won't deliver an interrupt. */
void xen_poll_irq(int irq)
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index e9e1116..06592b9 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -508,7 +508,7 @@
unsigned int max_nr_glist_frames, nr_glist_frames;
unsigned int nr_init_grefs;
- if (!is_running_on_xen())
+ if (!xen_domain())
return -ENODEV;
nr_grant_frames = 1;
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index 57ceb53..7f24a98 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -814,7 +814,7 @@
DPRINTK("");
err = -ENODEV;
- if (!is_running_on_xen())
+ if (!xen_domain())
goto out_error;
/* Register ourselves with the kernel bus subsystem */
@@ -829,7 +829,7 @@
/*
* Domain0 doesn't have a store_evtchn or store_mfn yet.
*/
- if (is_initial_xendomain()) {
+ if (xen_initial_domain()) {
/* dom0 not yet supported */
} else {
xenstored_ready = 1;
@@ -846,7 +846,7 @@
goto out_unreg_back;
}
- if (!is_initial_xendomain())
+ if (!xen_initial_domain())
xenbus_probe(NULL);
return 0;
@@ -937,7 +937,7 @@
unsigned long timeout = jiffies + 10*HZ;
struct device_driver *drv = xendrv ? &xendrv->driver : NULL;
- if (!ready_to_wait_for_devices || !is_running_on_xen())
+ if (!ready_to_wait_for_devices || !xen_domain())
return;
while (exists_disconnected_device(drv)) {
diff --git a/include/asm-generic/siginfo.h b/include/asm-generic/siginfo.h
index 8786e01..9695701 100644
--- a/include/asm-generic/siginfo.h
+++ b/include/asm-generic/siginfo.h
@@ -199,6 +199,8 @@
*/
#define TRAP_BRKPT (__SI_FAULT|1) /* process breakpoint */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
+#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
+#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint/watchpoint */
#define NSIGTRAP 2
/*
diff --git a/include/asm-parisc/siginfo.h b/include/asm-parisc/siginfo.h
index d4909f5..d703472 100644
--- a/include/asm-parisc/siginfo.h
+++ b/include/asm-parisc/siginfo.h
@@ -3,11 +3,6 @@
#include <asm-generic/siginfo.h>
-/*
- * SIGTRAP si_codes
- */
-#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
-#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint or watchpoint */
#undef NSIGTRAP
#define NSIGTRAP 4
diff --git a/include/asm-x86/bios_ebda.h b/include/asm-x86/bios_ebda.h
index ec42ed8..79b4b88 100644
--- a/include/asm-x86/bios_ebda.h
+++ b/include/asm-x86/bios_ebda.h
@@ -16,4 +16,21 @@
void reserve_ebda_region(void);
+#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
+/*
+ * This is obviously not a great place for this, but we want to be
+ * able to scatter it around anywhere in the kernel.
+ */
+void check_for_bios_corruption(void);
+void start_periodic_check_for_corruption(void);
+#else
+static inline void check_for_bios_corruption(void)
+{
+}
+
+static inline void start_periodic_check_for_corruption(void)
+{
+}
+#endif
+
#endif /* ASM_X86__BIOS_EBDA_H */
diff --git a/include/asm-x86/boot.h b/include/asm-x86/boot.h
index 825de5d..1d63bd5 100644
--- a/include/asm-x86/boot.h
+++ b/include/asm-x86/boot.h
@@ -2,9 +2,7 @@
#define ASM_X86__BOOT_H
/* Don't touch these, unless you really know what you're doing. */
-#define DEF_INITSEG 0x9000
#define DEF_SYSSEG 0x1000
-#define DEF_SETUPSEG 0x9020
#define DEF_SYSSIZE 0x7F00
/* Internal svga startup constants */
diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h
index b73fea5..ebc3078 100644
--- a/include/asm-x86/desc.h
+++ b/include/asm-x86/desc.h
@@ -24,6 +24,11 @@
desc->d = info->seg_32bit;
desc->g = info->limit_in_pages;
desc->base2 = (info->base_addr & 0xff000000) >> 24;
+ /*
+ * Don't allow setting of the lm bit. It is useless anyway
+ * because 64bit system calls require __USER_CS:
+ */
+ desc->l = 0;
}
extern struct desc_ptr idt_descr;
@@ -97,7 +102,15 @@
native_write_gdt_entry(dt, entry, desc, type)
#define write_idt_entry(dt, entry, g) \
native_write_idt_entry(dt, entry, g)
-#endif
+
+static inline void paravirt_alloc_ldt(struct desc_struct *ldt, unsigned entries)
+{
+}
+
+static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
+{
+}
+#endif /* CONFIG_PARAVIRT */
static inline void native_write_idt_entry(gate_desc *idt, int entry,
const gate_desc *gate)
diff --git a/include/asm-x86/microcode.h b/include/asm-x86/microcode.h
new file mode 100644
index 0000000..62c793b
--- /dev/null
+++ b/include/asm-x86/microcode.h
@@ -0,0 +1,47 @@
+#ifndef ASM_X86__MICROCODE_H
+#define ASM_X86__MICROCODE_H
+
+struct cpu_signature {
+ unsigned int sig;
+ unsigned int pf;
+ unsigned int rev;
+};
+
+struct device;
+
+struct microcode_ops {
+ int (*request_microcode_user) (int cpu, const void __user *buf, size_t size);
+ int (*request_microcode_fw) (int cpu, struct device *device);
+
+ void (*apply_microcode) (int cpu);
+
+ int (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
+ void (*microcode_fini_cpu) (int cpu);
+};
+
+struct ucode_cpu_info {
+ struct cpu_signature cpu_sig;
+ int valid;
+ void *mc;
+};
+extern struct ucode_cpu_info ucode_cpu_info[];
+
+#ifdef CONFIG_MICROCODE_INTEL
+extern struct microcode_ops * __init init_intel_microcode(void);
+#else
+static inline struct microcode_ops * __init init_intel_microcode(void)
+{
+ return NULL;
+}
+#endif /* CONFIG_MICROCODE_INTEL */
+
+#ifdef CONFIG_MICROCODE_AMD
+extern struct microcode_ops * __init init_amd_microcode(void);
+#else
+static inline struct microcode_ops * __init init_amd_microcode(void)
+{
+ return NULL;
+}
+#endif
+
+#endif /* ASM_X86__MICROCODE_H */
diff --git a/include/asm-x86/mmzone_64.h b/include/asm-x86/mmzone_64.h
index 626b03a..6480f33 100644
--- a/include/asm-x86/mmzone_64.h
+++ b/include/asm-x86/mmzone_64.h
@@ -7,7 +7,7 @@
#ifdef CONFIG_NUMA
-#define VIRTUAL_BUG_ON(x)
+#include <linux/mmdebug.h>
#include <asm/smp.h>
@@ -29,7 +29,6 @@
{
unsigned nid;
VIRTUAL_BUG_ON(!memnodemap);
- VIRTUAL_BUG_ON((addr >> memnode_shift) >= memnodemapsize);
nid = memnodemap[addr >> memnode_shift];
VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]);
return nid;
diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h
index 72f7305..9c5a737 100644
--- a/include/asm-x86/page_32.h
+++ b/include/asm-x86/page_32.h
@@ -73,7 +73,12 @@
#endif
#ifndef __ASSEMBLY__
+#define __phys_addr_const(x) ((x) - PAGE_OFFSET)
+#ifdef CONFIG_DEBUG_VIRTUAL
+extern unsigned long __phys_addr(unsigned long);
+#else
#define __phys_addr(x) ((x) - PAGE_OFFSET)
+#endif
#define __phys_reloc_hide(x) RELOC_HIDE((x), 0)
#ifdef CONFIG_FLATMEM
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
index d7d358a..8d6ae2f 100644
--- a/include/asm-x86/paravirt.h
+++ b/include/asm-x86/paravirt.h
@@ -124,6 +124,9 @@
int entrynum, const void *desc, int size);
void (*write_idt_entry)(gate_desc *,
int entrynum, const gate_desc *gate);
+ void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
+ void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
+
void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
void (*set_iopl_mask)(unsigned mask);
@@ -325,6 +328,7 @@
int (*spin_is_locked)(struct raw_spinlock *lock);
int (*spin_is_contended)(struct raw_spinlock *lock);
void (*spin_lock)(struct raw_spinlock *lock);
+ void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
int (*spin_trylock)(struct raw_spinlock *lock);
void (*spin_unlock)(struct raw_spinlock *lock);
};
@@ -830,6 +834,16 @@
(aux) = __aux; \
} while (0)
+static inline void paravirt_alloc_ldt(struct desc_struct *ldt, unsigned entries)
+{
+ PVOP_VCALL2(pv_cpu_ops.alloc_ldt, ldt, entries);
+}
+
+static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries)
+{
+ PVOP_VCALL2(pv_cpu_ops.free_ldt, ldt, entries);
+}
+
static inline void load_TR_desc(void)
{
PVOP_VCALL0(pv_cpu_ops.load_tr_desc);
@@ -1394,6 +1408,12 @@
PVOP_VCALL1(pv_lock_ops.spin_lock, lock);
}
+static __always_inline void __raw_spin_lock_flags(struct raw_spinlock *lock,
+ unsigned long flags)
+{
+ PVOP_VCALL2(pv_lock_ops.spin_lock_flags, lock, flags);
+}
+
static __always_inline int __raw_spin_trylock(struct raw_spinlock *lock)
{
return PVOP_CALL1(int, pv_lock_ops.spin_trylock, lock);
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
index c7d3546..ee7cbb3 100644
--- a/include/asm-x86/processor.h
+++ b/include/asm-x86/processor.h
@@ -586,41 +586,6 @@
write_cr4(cr4);
}
-struct microcode_header {
- unsigned int hdrver;
- unsigned int rev;
- unsigned int date;
- unsigned int sig;
- unsigned int cksum;
- unsigned int ldrver;
- unsigned int pf;
- unsigned int datasize;
- unsigned int totalsize;
- unsigned int reserved[3];
-};
-
-struct microcode {
- struct microcode_header hdr;
- unsigned int bits[0];
-};
-
-typedef struct microcode microcode_t;
-typedef struct microcode_header microcode_header_t;
-
-/* microcode format is extended from prescott processors */
-struct extended_signature {
- unsigned int sig;
- unsigned int pf;
- unsigned int cksum;
-};
-
-struct extended_sigtable {
- unsigned int count;
- unsigned int cksum;
- unsigned int reserved[3];
- struct extended_signature sigs[0];
-};
-
typedef struct {
unsigned long seg;
} mm_segment_t;
diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h
index d64a610..ac578f1 100644
--- a/include/asm-x86/ptrace.h
+++ b/include/asm-x86/ptrace.h
@@ -177,11 +177,11 @@
#ifdef CONFIG_X86_32
extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
- int error_code);
-#else
-void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
+ int error_code, int si_code);
#endif
+void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
+
extern long syscall_trace_enter(struct pt_regs *);
extern void syscall_trace_leave(struct pt_regs *);
diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h
index 29324c1..6df2615 100644
--- a/include/asm-x86/smp.h
+++ b/include/asm-x86/smp.h
@@ -50,12 +50,16 @@
struct smp_ops {
void (*smp_prepare_boot_cpu)(void);
void (*smp_prepare_cpus)(unsigned max_cpus);
- int (*cpu_up)(unsigned cpu);
void (*smp_cpus_done)(unsigned max_cpus);
void (*smp_send_stop)(void);
void (*smp_send_reschedule)(int cpu);
+ int (*cpu_up)(unsigned cpu);
+ int (*cpu_disable)(void);
+ void (*cpu_die)(unsigned int cpu);
+ void (*play_dead)(void);
+
void (*send_call_func_ipi)(cpumask_t mask);
void (*send_call_func_single_ipi)(int cpu);
};
@@ -94,6 +98,21 @@
return smp_ops.cpu_up(cpu);
}
+static inline int __cpu_disable(void)
+{
+ return smp_ops.cpu_disable();
+}
+
+static inline void __cpu_die(unsigned int cpu)
+{
+ smp_ops.cpu_die(cpu);
+}
+
+static inline void play_dead(void)
+{
+ smp_ops.play_dead();
+}
+
static inline void smp_send_reschedule(int cpu)
{
smp_ops.smp_send_reschedule(cpu);
@@ -109,16 +128,19 @@
smp_ops.send_call_func_ipi(mask);
}
+void cpu_disable_common(void);
void native_smp_prepare_boot_cpu(void);
void native_smp_prepare_cpus(unsigned int max_cpus);
void native_smp_cpus_done(unsigned int max_cpus);
int native_cpu_up(unsigned int cpunum);
+int native_cpu_disable(void);
+void native_cpu_die(unsigned int cpu);
+void native_play_dead(void);
+void play_dead_common(void);
+
void native_send_call_func_ipi(cpumask_t mask);
void native_send_call_func_single_ipi(int cpu);
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-
void smp_store_cpu_info(int id);
#define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu)
@@ -205,9 +227,5 @@
#endif /* CONFIG_X86_LOCAL_APIC */
-#ifdef CONFIG_HOTPLUG_CPU
-extern void cpu_uninit(void);
-#endif
-
#endif /* __ASSEMBLY__ */
#endif /* ASM_X86__SMP_H */
diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h
index 93adae3..157ff7f 100644
--- a/include/asm-x86/spinlock.h
+++ b/include/asm-x86/spinlock.h
@@ -21,8 +21,10 @@
#ifdef CONFIG_X86_32
# define LOCK_PTR_REG "a"
+# define REG_PTR_MODE "k"
#else
# define LOCK_PTR_REG "D"
+# define REG_PTR_MODE "q"
#endif
#if defined(CONFIG_X86_32) && \
@@ -54,19 +56,7 @@
* much between them in performance though, especially as locks are out of line.
*/
#if (NR_CPUS < 256)
-static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
-{
- int tmp = ACCESS_ONCE(lock->slock);
-
- return (((tmp >> 8) & 0xff) != (tmp & 0xff));
-}
-
-static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
-{
- int tmp = ACCESS_ONCE(lock->slock);
-
- return (((tmp >> 8) - tmp) & 0xff) > 1;
-}
+#define TICKET_SHIFT 8
static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
{
@@ -89,19 +79,17 @@
static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
{
- int tmp;
- short new;
+ int tmp, new;
- asm volatile("movw %2,%w0\n\t"
+ asm volatile("movzwl %2, %0\n\t"
"cmpb %h0,%b0\n\t"
+ "leal 0x100(%" REG_PTR_MODE "0), %1\n\t"
"jne 1f\n\t"
- "movw %w0,%w1\n\t"
- "incb %h1\n\t"
LOCK_PREFIX "cmpxchgw %w1,%2\n\t"
"1:"
"sete %b1\n\t"
"movzbl %b1,%0\n\t"
- : "=&a" (tmp), "=Q" (new), "+m" (lock->slock)
+ : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
:
: "memory", "cc");
@@ -116,19 +104,7 @@
: "memory", "cc");
}
#else
-static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
-{
- int tmp = ACCESS_ONCE(lock->slock);
-
- return (((tmp >> 16) & 0xffff) != (tmp & 0xffff));
-}
-
-static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
-{
- int tmp = ACCESS_ONCE(lock->slock);
-
- return (((tmp >> 16) - tmp) & 0xffff) > 1;
-}
+#define TICKET_SHIFT 16
static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
{
@@ -146,7 +122,7 @@
/* don't need lfence here, because loads are in-order */
"jmp 1b\n"
"2:"
- : "+Q" (inc), "+m" (lock->slock), "=r" (tmp)
+ : "+r" (inc), "+m" (lock->slock), "=&r" (tmp)
:
: "memory", "cc");
}
@@ -160,13 +136,13 @@
"movl %0,%1\n\t"
"roll $16, %0\n\t"
"cmpl %0,%1\n\t"
+ "leal 0x00010000(%" REG_PTR_MODE "0), %1\n\t"
"jne 1f\n\t"
- "addl $0x00010000, %1\n\t"
LOCK_PREFIX "cmpxchgl %1,%2\n\t"
"1:"
"sete %b1\n\t"
"movzbl %b1,%0\n\t"
- : "=&a" (tmp), "=r" (new), "+m" (lock->slock)
+ : "=&a" (tmp), "=&q" (new), "+m" (lock->slock)
:
: "memory", "cc");
@@ -182,7 +158,19 @@
}
#endif
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
+{
+ int tmp = ACCESS_ONCE(lock->slock);
+
+ return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1 << TICKET_SHIFT) - 1));
+}
+
+static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
+{
+ int tmp = ACCESS_ONCE(lock->slock);
+
+ return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
+}
#ifdef CONFIG_PARAVIRT
/*
@@ -272,6 +260,13 @@
{
__ticket_spin_unlock(lock);
}
+
+static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
+ unsigned long flags)
+{
+ __raw_spin_lock(lock);
+}
+
#endif /* CONFIG_PARAVIRT */
static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
diff --git a/include/asm-x86/tlbflush.h b/include/asm-x86/tlbflush.h
index ef68b76..3cdd08b 100644
--- a/include/asm-x86/tlbflush.h
+++ b/include/asm-x86/tlbflush.h
@@ -119,6 +119,10 @@
{
}
+static inline void reset_lazy_tlbstate(void)
+{
+}
+
#else /* SMP */
#include <asm/smp.h>
@@ -151,6 +155,12 @@
char __cacheline_padding[L1_CACHE_BYTES-8];
};
DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
+
+void reset_lazy_tlbstate(void);
+#else
+static inline void reset_lazy_tlbstate(void)
+{
+}
#endif
#endif /* SMP */
diff --git a/include/asm-x86/traps.h b/include/asm-x86/traps.h
index 2ccebc6..7a692ba 100644
--- a/include/asm-x86/traps.h
+++ b/include/asm-x86/traps.h
@@ -1,6 +1,8 @@
#ifndef ASM_X86__TRAPS_H
#define ASM_X86__TRAPS_H
+#include <asm/debugreg.h>
+
/* Common in X86_32 and X86_64 */
asmlinkage void divide_error(void);
asmlinkage void debug(void);
@@ -36,6 +38,16 @@
void do_general_protection(struct pt_regs *, long);
void do_nmi(struct pt_regs *, long);
+static inline int get_si_code(unsigned long condition)
+{
+ if (condition & DR_STEP)
+ return TRAP_TRACE;
+ else if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3))
+ return TRAP_HWBKPT;
+ else
+ return TRAP_BRKPT;
+}
+
extern int panic_on_unrecovered_nmi;
extern int kstack_depth_to_print;
diff --git a/include/asm-x86/xen/hypervisor.h b/include/asm-x86/xen/hypervisor.h
index 0ef3a88..445a247 100644
--- a/include/asm-x86/xen/hypervisor.h
+++ b/include/asm-x86/xen/hypervisor.h
@@ -54,7 +54,6 @@
/* arch/i386/kernel/setup.c */
extern struct shared_info *HYPERVISOR_shared_info;
extern struct start_info *xen_start_info;
-#define is_initial_xendomain() (xen_start_info->flags & SIF_INITDOMAIN)
/* arch/i386/mach-xen/evtchn.c */
/* Force a proper event-channel callback from Xen. */
@@ -67,6 +66,17 @@
#define MULTI_UVMFLAGS_INDEX 3
#define MULTI_UVMDOMID_INDEX 4
-#define is_running_on_xen() (xen_start_info ? 1 : 0)
+enum xen_domain_type {
+ XEN_NATIVE,
+ XEN_PV_DOMAIN,
+ XEN_HVM_DOMAIN,
+};
+
+extern enum xen_domain_type xen_domain_type;
+
+#define xen_domain() (xen_domain_type != XEN_NATIVE)
+#define xen_pv_domain() (xen_domain_type == XEN_PV_DOMAIN)
+#define xen_initial_domain() (xen_pv_domain() && xen_start_info->flags & SIF_INITDOMAIN)
+#define xen_hvm_domain() (xen_domain_type == XEN_HVM_DOMAIN)
#endif /* ASM_X86__XEN__HYPERVISOR_H */
diff --git a/include/linux/elf.h b/include/linux/elf.h
index edc3dac..0b61ca4 100644
--- a/include/linux/elf.h
+++ b/include/linux/elf.h
@@ -360,6 +360,7 @@
#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */
#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */
#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */
+#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */
/* Note header in a PT_NOTE section */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 2651f80..75d81f1 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -182,7 +182,7 @@
extern int get_option(char **str, int *pint);
extern char *get_options(const char *str, int nints, int *ints);
-extern unsigned long long memparse(char *ptr, char **retptr);
+extern unsigned long long memparse(const char *ptr, char **retptr);
extern int core_kernel_text(unsigned long addr);
extern int __kernel_text_address(unsigned long addr);
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 72a15dc..c61ba10 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -7,6 +7,7 @@
#include <linux/gfp.h>
#include <linux/list.h>
+#include <linux/mmdebug.h>
#include <linux/mmzone.h>
#include <linux/rbtree.h>
#include <linux/prio_tree.h>
@@ -219,12 +220,6 @@
*/
#include <linux/page-flags.h>
-#ifdef CONFIG_DEBUG_VM
-#define VM_BUG_ON(cond) BUG_ON(cond)
-#else
-#define VM_BUG_ON(condition) do { } while(0)
-#endif
-
/*
* Methods to modify the page usage count.
*
@@ -919,7 +914,7 @@
}
#endif /* CONFIG_MMU && !__ARCH_HAS_4LEVEL_HACK */
-#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
+#if USE_SPLIT_PTLOCKS
/*
* We tuck a spinlock to guard each pagetable page into its struct page,
* at page->private, with BUILD_BUG_ON to make sure that this will not
@@ -932,14 +927,14 @@
} while (0)
#define pte_lock_deinit(page) ((page)->mapping = NULL)
#define pte_lockptr(mm, pmd) ({(void)(mm); __pte_lockptr(pmd_page(*(pmd)));})
-#else
+#else /* !USE_SPLIT_PTLOCKS */
/*
* We use mm->page_table_lock to guard all pagetable pages of the mm.
*/
#define pte_lock_init(page) do {} while (0)
#define pte_lock_deinit(page) do {} while (0)
#define pte_lockptr(mm, pmd) ({(void)(pmd); &(mm)->page_table_lock;})
-#endif /* NR_CPUS < CONFIG_SPLIT_PTLOCK_CPUS */
+#endif /* USE_SPLIT_PTLOCKS */
static inline void pgtable_page_ctor(struct page *page)
{
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index bf33413..9d49fa3 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -21,11 +21,13 @@
struct address_space;
-#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
+#define USE_SPLIT_PTLOCKS (NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS)
+
+#if USE_SPLIT_PTLOCKS
typedef atomic_long_t mm_counter_t;
-#else /* NR_CPUS < CONFIG_SPLIT_PTLOCK_CPUS */
+#else /* !USE_SPLIT_PTLOCKS */
typedef unsigned long mm_counter_t;
-#endif /* NR_CPUS < CONFIG_SPLIT_PTLOCK_CPUS */
+#endif /* !USE_SPLIT_PTLOCKS */
/*
* Each physical page in the system has a struct page associated with
@@ -65,7 +67,7 @@
* see PAGE_MAPPING_ANON below.
*/
};
-#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
+#if USE_SPLIT_PTLOCKS
spinlock_t ptl;
#endif
struct kmem_cache *slab; /* SLUB: Pointer to slab */
diff --git a/include/linux/mmdebug.h b/include/linux/mmdebug.h
new file mode 100644
index 0000000..8a55098
--- /dev/null
+++ b/include/linux/mmdebug.h
@@ -0,0 +1,18 @@
+#ifndef LINUX_MM_DEBUG_H
+#define LINUX_MM_DEBUG_H 1
+
+#include <linux/autoconf.h>
+
+#ifdef CONFIG_DEBUG_VM
+#define VM_BUG_ON(cond) BUG_ON(cond)
+#else
+#define VM_BUG_ON(cond) do { } while (0)
+#endif
+
+#ifdef CONFIG_DEBUG_VIRTUAL
+#define VIRTUAL_BUG_ON(cond) BUG_ON(cond)
+#else
+#define VIRTUAL_BUG_ON(cond) do { } while (0)
+#endif
+
+#endif
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 5d0819e..c226c7b 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -352,7 +352,7 @@
extern void arch_unmap_area(struct mm_struct *, unsigned long);
extern void arch_unmap_area_topdown(struct mm_struct *, unsigned long);
-#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
+#if USE_SPLIT_PTLOCKS
/*
* The mm counters are not protected by its page_table_lock,
* so must be incremented atomically.
@@ -363,7 +363,7 @@
#define inc_mm_counter(mm, member) atomic_long_inc(&(mm)->_##member)
#define dec_mm_counter(mm, member) atomic_long_dec(&(mm)->_##member)
-#else /* NR_CPUS < CONFIG_SPLIT_PTLOCK_CPUS */
+#else /* !USE_SPLIT_PTLOCKS */
/*
* The mm counters are protected by its page_table_lock,
* so can be incremented directly.
@@ -374,7 +374,7 @@
#define inc_mm_counter(mm, member) (mm)->_##member++
#define dec_mm_counter(mm, member) (mm)->_##member--
-#endif /* NR_CPUS < CONFIG_SPLIT_PTLOCK_CPUS */
+#endif /* !USE_SPLIT_PTLOCKS */
#define get_mm_rss(mm) \
(get_mm_counter(mm, file_rss) + get_mm_counter(mm, anon_rss))
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
new file mode 100644
index 0000000..5b88e36
--- /dev/null
+++ b/include/linux/usb/ehci_def.h
@@ -0,0 +1,160 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_EHCI_DEF_H
+#define __LINUX_USB_EHCI_DEF_H
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+ /* these fields are specified as 8 and 16 bit registers,
+ * but some hosts can't perform 8 or 16 bit PCI accesses.
+ */
+ u32 hc_capbase;
+#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
+#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
+ u32 hcs_params; /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
+#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
+#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
+#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
+
+ u32 hcc_params; /* HCCPARAMS - offset 0x8 */
+#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
+#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
+ u8 portroute [8]; /* nibbles for routing - offset 0xC */
+} __attribute__ ((packed));
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+
+ /* USBCMD: offset 0x00 */
+ u32 command;
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK (1<<11) /* enable "park" on async qh */
+#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
+#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
+#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
+#define CMD_ASE (1<<5) /* async schedule enable */
+#define CMD_PSE (1<<4) /* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET (1<<1) /* reset HC not bus */
+#define CMD_RUN (1<<0) /* start/stop HC */
+
+ /* USBSTS: offset 0x04 */
+ u32 status;
+#define STS_ASS (1<<15) /* Async Schedule Status */
+#define STS_PSS (1<<14) /* Periodic Schedule Status */
+#define STS_RECL (1<<13) /* Reclamation */
+#define STS_HALT (1<<12) /* Not running (any reason) */
+/* some bits reserved */
+ /* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA (1<<5) /* Interrupted on async advance */
+#define STS_FATAL (1<<4) /* such as some PCI access errors */
+#define STS_FLR (1<<3) /* frame list rolled over */
+#define STS_PCD (1<<2) /* port change detect */
+#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
+#define STS_INT (1<<0) /* "normal" completion (short, ...) */
+
+ /* USBINTR: offset 0x08 */
+ u32 intr_enable;
+
+ /* FRINDEX: offset 0x0C */
+ u32 frame_index; /* current microframe number */
+ /* CTRLDSSEGMENT: offset 0x10 */
+ u32 segment; /* address bits 63:32 if needed */
+ /* PERIODICLISTBASE: offset 0x14 */
+ u32 frame_list; /* points to periodic list */
+ /* ASYNCLISTADDR: offset 0x18 */
+ u32 async_next; /* address of next async queue head */
+
+ u32 reserved [9];
+
+ /* CONFIGFLAG: offset 0x40 */
+ u32 configured_flag;
+#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
+
+ /* PORTSC: offset 0x44 */
+ u32 port_status [0]; /* up to N_PORTS */
+/* 31:23 reserved */
+#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
+#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
+#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_LED_OFF (0<<14)
+#define PORT_LED_AMBER (1<<14)
+#define PORT_LED_GREEN (2<<14)
+#define PORT_LED_MASK (3<<14)
+#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
+#define PORT_POWER (1<<12) /* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_RESET (1<<8) /* reset port */
+#define PORT_SUSPEND (1<<7) /* suspend port */
+#define PORT_RESUME (1<<6) /* resume it */
+#define PORT_OCC (1<<5) /* over current change */
+#define PORT_OC (1<<4) /* over current active */
+#define PORT_PEC (1<<3) /* port enable change */
+#define PORT_PE (1<<2) /* port enable */
+#define PORT_CSC (1<<1) /* connect status change */
+#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+} __attribute__ ((packed));
+
+#define USBMODE 0x68 /* USB Device mode */
+#define USBMODE_SDIS (1<<3) /* Stream disable */
+#define USBMODE_BE (1<<2) /* BE/LE endianness select */
+#define USBMODE_CM_HC (3<<0) /* host controller mode */
+#define USBMODE_CM_IDLE (0<<0) /* idle state */
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console. (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+ u32 control;
+#define DBGP_OWNER (1<<30)
+#define DBGP_ENABLED (1<<28)
+#define DBGP_DONE (1<<16)
+#define DBGP_INUSE (1<<10)
+#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
+# define DBGP_ERR_BAD 1
+# define DBGP_ERR_SIGNAL 2
+#define DBGP_ERROR (1<<6)
+#define DBGP_GO (1<<5)
+#define DBGP_OUT (1<<4)
+#define DBGP_LEN(x) (((x)>>0)&0x0f)
+ u32 pids;
+#define DBGP_PID_GET(x) (((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
+ u32 data03;
+ u32 data47;
+ u32 address;
+#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
+} __attribute__ ((packed));
+
+#endif /* __LINUX_USB_EHCI_DEF_H */
diff --git a/include/xen/balloon.h b/include/xen/balloon.h
deleted file mode 100644
index fe43b0f..0000000
--- a/include/xen/balloon.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/******************************************************************************
- * balloon.h
- *
- * Xen balloon driver - enables returning/claiming memory to/from Xen.
- *
- * Copyright (c) 2003, B Dragovic
- * Copyright (c) 2003-2004, M Williamson, K Fraser
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation; or, when distributed
- * separately from the Linux kernel or incorporated into other
- * software packages, subject to the following license:
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this source file (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use, copy, modify,
- * merge, publish, distribute, sublicense, and/or sell copies of the Software,
- * and to permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
- * IN THE SOFTWARE.
- */
-
-#ifndef __XEN_BALLOON_H__
-#define __XEN_BALLOON_H__
-
-#include <linux/spinlock.h>
-
-#if 0
-/*
- * Inform the balloon driver that it should allow some slop for device-driver
- * memory activities.
- */
-void balloon_update_driver_allowance(long delta);
-
-/* Allocate/free a set of empty pages in low memory (i.e., no RAM mapped). */
-struct page **alloc_empty_pages_and_pagevec(int nr_pages);
-void free_empty_pages_and_pagevec(struct page **pagevec, int nr_pages);
-
-void balloon_release_driver_page(struct page *page);
-
-/*
- * Prevent the balloon driver from changing the memory reservation during
- * a driver critical region.
- */
-extern spinlock_t balloon_lock;
-#define balloon_lock(__flags) spin_lock_irqsave(&balloon_lock, __flags)
-#define balloon_unlock(__flags) spin_unlock_irqrestore(&balloon_lock, __flags)
-#endif
-
-#endif /* __XEN_BALLOON_H__ */
diff --git a/include/xen/events.h b/include/xen/events.h
index 4680ff3..0d5f1ad 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -46,6 +46,8 @@
/* Clear an irq's pending state, in preparation for polling on it */
void xen_clear_irq_pending(int irq);
+void xen_set_irq_pending(int irq);
+bool xen_test_irq_pending(int irq);
/* Poll waiting for an irq to become pending. In the usual case, the
irq will be disabled so it won't deliver an interrupt. */
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index ce697e0..aa81d28 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -495,6 +495,15 @@
If unsure, say N.
+config DEBUG_VIRTUAL
+ bool "Debug VM translations"
+ depends on DEBUG_KERNEL && X86
+ help
+ Enable some costly sanity checks in virtual to page code. This can
+ catch mistakes with virt_to_page() and friends.
+
+ If unsure, say N.
+
config DEBUG_WRITECOUNT
bool "Debug filesystem writers count"
depends on DEBUG_KERNEL
diff --git a/lib/cmdline.c b/lib/cmdline.c
index 5ba8a94..f5f3ad8 100644
--- a/lib/cmdline.c
+++ b/lib/cmdline.c
@@ -126,7 +126,7 @@
* megabyte, or one gigabyte, respectively.
*/
-unsigned long long memparse(char *ptr, char **retptr)
+unsigned long long memparse(const char *ptr, char **retptr)
{
char *endptr; /* local pointer to end of parsed string */
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 85b9a0d..bba06c4 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -180,6 +180,13 @@
pmd_t *pmd;
pte_t *ptep, pte;
+ /*
+ * XXX we might need to change this if we add VIRTUAL_BUG_ON for
+ * architectures that do not vmalloc module space
+ */
+ VIRTUAL_BUG_ON(!is_vmalloc_addr(vmalloc_addr) &&
+ !is_module_address(addr));
+
if (!pgd_none(*pgd)) {
pud = pud_offset(pgd, addr);
if (!pud_none(*pud)) {
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index d64e6ba..982dcae 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -105,12 +105,12 @@
# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
cc-option = $(call try-run,\
- $(CC) $(KBUILD_CFLAGS) $(1) -S -xc /dev/null -o "$$TMP",$(1),$(2))
+ $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
# cc-option-yn
# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
cc-option-yn = $(call try-run,\
- $(CC) $(KBUILD_CFLAGS) $(1) -S -xc /dev/null -o "$$TMP",y,n)
+ $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
# cc-option-align
# Prefix align with either -falign or -malign